Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...

4 files changed, 1 insertions, 580 deletions

diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index d91618641be6..18450437d5d5 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -74,13 +74,6 @@ config OF_NET
 	depends on NETDEVICES
 	def_bool y
 
-config OF_MDIO
-	def_tristate PHYLIB
-	depends on PHYLIB
-	select FIXED_PHY
-	help
-	  OpenFirmware MDIO bus (Ethernet PHY) accessors
-
 config OF_RESERVED_MEM
 	bool
 	depends on OF_EARLY_FLATTREE
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 663a4af0cccd..6e1e5212f058 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_OF_ADDRESS)  += address.o
 obj-$(CONFIG_OF_IRQ)    += irq.o
 obj-$(CONFIG_OF_NET)	+= of_net.o
 obj-$(CONFIG_OF_UNITTEST) += unittest.o
-obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
 obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o
 obj-$(CONFIG_OF_RESOLVE)  += resolver.o
 obj-$(CONFIG_OF_OVERLAY) += overlay.o
diff --git a/drivers/of/base.c b/drivers/of/base.c
index ea44fea99813..161a23631472 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1869,6 +1869,7 @@ int of_remove_property(struct device_node *np, struct property *prop)
 
 	return rc;
 }
+EXPORT_SYMBOL_GPL(of_remove_property);
 
 int __of_update_property(struct device_node *np, struct property *newprop,
 		struct property **oldpropp)
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
deleted file mode 100644
index cb32d7ef4938..000000000000
--- a/drivers/of/of_mdio.c
+++ /dev/null
@@ -1,572 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OF helpers for the MDIO (Ethernet PHY) API
- *
- * Copyright (c) 2009 Secret Lab Technologies, Ltd.
- *
- * This file provides helper functions for extracting PHY device information
- * out of the OpenFirmware device tree and using it to populate an mii_bus.
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/netdevice.h>
-#include <linux/err.h>
-#include <linux/phy.h>
-#include <linux/phy_fixed.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_mdio.h>
-#include <linux/of_net.h>
-#include <linux/module.h>
-
-#define DEFAULT_GPIO_RESET_DELAY	10	/* in microseconds */
-
-MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
-MODULE_LICENSE("GPL");
-
-/* Extract the clause 22 phy ID from the compatible string of the form
- * ethernet-phy-idAAAA.BBBB */
-static int of_get_phy_id(struct device_node *device, u32 *phy_id)
-{
-	struct property *prop;
-	const char *cp;
-	unsigned int upper, lower;
-
-	of_property_for_each_string(device, "compatible", prop, cp) {
-		if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) {
-			*phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
-{
-	struct of_phandle_args arg;
-	int err;
-
-	err = of_parse_phandle_with_fixed_args(node, "timestamper", 1, 0, &arg);
-
-	if (err == -ENOENT)
-		return NULL;
-	else if (err)
-		return ERR_PTR(err);
-
-	if (arg.args_count != 1)
-		return ERR_PTR(-EINVAL);
-
-	return register_mii_timestamper(arg.np, arg.args[0]);
-}
-
-int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
-			      struct device_node *child, u32 addr)
-{
-	int rc;
-
-	rc = of_irq_get(child, 0);
-	if (rc == -EPROBE_DEFER)
-		return rc;
-
-	if (rc > 0) {
-		phy->irq = rc;
-		mdio->irq[addr] = rc;
-	} else {
-		phy->irq = mdio->irq[addr];
-	}
-
-	if (of_property_read_bool(child, "broken-turn-around"))
-		mdio->phy_ignore_ta_mask |= 1 << addr;
-
-	of_property_read_u32(child, "reset-assert-us",
-			     &phy->mdio.reset_assert_delay);
-	of_property_read_u32(child, "reset-deassert-us",
-			     &phy->mdio.reset_deassert_delay);
-
-	/* Associate the OF node with the device structure so it
-	 * can be looked up later */
-	of_node_get(child);
-	phy->mdio.dev.of_node = child;
-	phy->mdio.dev.fwnode = of_fwnode_handle(child);
-
-	/* All data is now stored in the phy struct;
-	 * register it */
-	rc = phy_device_register(phy);
-	if (rc) {
-		of_node_put(child);
-		return rc;
-	}
-
-	dev_dbg(&mdio->dev, "registered phy %pOFn at address %i\n",
-		child, addr);
-	return 0;
-}
-EXPORT_SYMBOL(of_mdiobus_phy_device_register);
-
-static int of_mdiobus_register_phy(struct mii_bus *mdio,
-				    struct device_node *child, u32 addr)
-{
-	struct mii_timestamper *mii_ts;
-	struct phy_device *phy;
-	bool is_c45;
-	int rc;
-	u32 phy_id;
-
-	mii_ts = of_find_mii_timestamper(child);
-	if (IS_ERR(mii_ts))
-		return PTR_ERR(mii_ts);
-
-	is_c45 = of_device_is_compatible(child,
-					 "ethernet-phy-ieee802.3-c45");
-
-	if (!is_c45 && !of_get_phy_id(child, &phy_id))
-		phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
-	else
-		phy = get_phy_device(mdio, addr, is_c45);
-	if (IS_ERR(phy)) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
-		return PTR_ERR(phy);
-	}
-
-	rc = of_mdiobus_phy_device_register(mdio, phy, child, addr);
-	if (rc) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
-		phy_device_free(phy);
-		return rc;
-	}
-
-	/* phy->mii_ts may already be defined by the PHY driver. A
-	 * mii_timestamper probed via the device tree will still have
-	 * precedence.
-	 */
-	if (mii_ts)
-		phy->mii_ts = mii_ts;
-
-	return 0;
-}
-
-static int of_mdiobus_register_device(struct mii_bus *mdio,
-				      struct device_node *child, u32 addr)
-{
-	struct mdio_device *mdiodev;
-	int rc;
-
-	mdiodev = mdio_device_create(mdio, addr);
-	if (IS_ERR(mdiodev))
-		return PTR_ERR(mdiodev);
-
-	/* Associate the OF node with the device structure so it
-	 * can be looked up later.
-	 */
-	of_node_get(child);
-	mdiodev->dev.of_node = child;
-	mdiodev->dev.fwnode = of_fwnode_handle(child);
-
-	/* All data is now stored in the mdiodev struct; register it. */
-	rc = mdio_device_register(mdiodev);
-	if (rc) {
-		mdio_device_free(mdiodev);
-		of_node_put(child);
-		return rc;
-	}
-
-	dev_dbg(&mdio->dev, "registered mdio device %pOFn at address %i\n",
-		child, addr);
-	return 0;
-}
-
-/* The following is a list of PHY compatible strings which appear in
- * some DTBs. The compatible string is never matched against a PHY
- * driver, so is pointless. We only expect devices which are not PHYs
- * to have a compatible string, so they can be matched to an MDIO
- * driver.  Encourage users to upgrade their DT blobs to remove these.
- */
-static const struct of_device_id whitelist_phys[] = {
-	{ .compatible = "brcm,40nm-ephy" },
-	{ .compatible = "broadcom,bcm5241" },
-	{ .compatible = "marvell,88E1111", },
-	{ .compatible = "marvell,88e1116", },
-	{ .compatible = "marvell,88e1118", },
-	{ .compatible = "marvell,88e1145", },
-	{ .compatible = "marvell,88e1149r", },
-	{ .compatible = "marvell,88e1310", },
-	{ .compatible = "marvell,88E1510", },
-	{ .compatible = "marvell,88E1514", },
-	{ .compatible = "moxa,moxart-rtl8201cp", },
-	{}
-};
-
-/*
- * Return true if the child node is for a phy. It must either:
- * o Compatible string of "ethernet-phy-idX.X"
- * o Compatible string of "ethernet-phy-ieee802.3-c45"
- * o Compatible string of "ethernet-phy-ieee802.3-c22"
- * o In the white list above (and issue a warning)
- * o No compatibility string
- *
- * A device which is not a phy is expected to have a compatible string
- * indicating what sort of device it is.
- */
-bool of_mdiobus_child_is_phy(struct device_node *child)
-{
-	u32 phy_id;
-
-	if (of_get_phy_id(child, &phy_id) != -EINVAL)
-		return true;
-
-	if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c45"))
-		return true;
-
-	if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c22"))
-		return true;
-
-	if (of_match_node(whitelist_phys, child)) {
-		pr_warn(FW_WARN
-			"%pOF: Whitelisted compatible string. Please remove\n",
-			child);
-		return true;
-	}
-
-	if (!of_find_property(child, "compatible", NULL))
-		return true;
-
-	return false;
-}
-EXPORT_SYMBOL(of_mdiobus_child_is_phy);
-
-/**
- * of_mdiobus_register - Register mii_bus and create PHYs from the device tree
- * @mdio: pointer to mii_bus structure
- * @np: pointer to device_node of MDIO bus.
- *
- * This function registers the mii_bus structure and registers a phy_device
- * for each child node of @np.
- */
-int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
-{
-	struct device_node *child;
-	bool scanphys = false;
-	int addr, rc;
-
-	if (!np)
-		return mdiobus_register(mdio);
-
-	/* Do not continue if the node is disabled */
-	if (!of_device_is_available(np))
-		return -ENODEV;
-
-	/* Mask out all PHYs from auto probing.  Instead the PHYs listed in
-	 * the device tree are populated after the bus has been registered */
-	mdio->phy_mask = ~0;
-
-	mdio->dev.of_node = np;
-	mdio->dev.fwnode = of_fwnode_handle(np);
-
-	/* Get bus level PHY reset GPIO details */
-	mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
-	of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
-	mdio->reset_post_delay_us = 0;
-	of_property_read_u32(np, "reset-post-delay-us", &mdio->reset_post_delay_us);
-
-	/* Register the MDIO bus */
-	rc = mdiobus_register(mdio);
-	if (rc)
-		return rc;
-
-	/* Loop over the child nodes and register a phy_device for each phy */
-	for_each_available_child_of_node(np, child) {
-		addr = of_mdio_parse_addr(&mdio->dev, child);
-		if (addr < 0) {
-			scanphys = true;
-			continue;
-		}
-
-		if (of_mdiobus_child_is_phy(child))
-			rc = of_mdiobus_register_phy(mdio, child, addr);
-		else
-			rc = of_mdiobus_register_device(mdio, child, addr);
-
-		if (rc == -ENODEV)
-			dev_err(&mdio->dev,
-				"MDIO device at address %d is missing.\n",
-				addr);
-		else if (rc)
-			goto unregister;
-	}
-
-	if (!scanphys)
-		return 0;
-
-	/* auto scan for PHYs with empty reg property */
-	for_each_available_child_of_node(np, child) {
-		/* Skip PHYs with reg property set */
-		if (of_find_property(child, "reg", NULL))
-			continue;
-
-		for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
-			/* skip already registered PHYs */
-			if (mdiobus_is_registered_device(mdio, addr))
-				continue;
-
-			/* be noisy to encourage people to set reg property */
-			dev_info(&mdio->dev, "scan phy %pOFn at address %i\n",
-				 child, addr);
-
-			if (of_mdiobus_child_is_phy(child)) {
-				/* -ENODEV is the return code that PHYLIB has
-				 * standardized on to indicate that bus
-				 * scanning should continue.
-				 */
-				rc = of_mdiobus_register_phy(mdio, child, addr);
-				if (!rc)
-					break;
-				if (rc != -ENODEV)
-					goto unregister;
-			}
-		}
-	}
-
-	return 0;
-
-unregister:
-	mdiobus_unregister(mdio);
-	return rc;
-}
-EXPORT_SYMBOL(of_mdiobus_register);
-
-/**
- * of_phy_find_device - Give a PHY node, find the phy_device
- * @phy_np: Pointer to the phy's device tree node
- *
- * If successful, returns a pointer to the phy_device with the embedded
- * struct device refcount incremented by one, or NULL on failure.
- */
-struct phy_device *of_phy_find_device(struct device_node *phy_np)
-{
-	struct device *d;
-	struct mdio_device *mdiodev;
-
-	if (!phy_np)
-		return NULL;
-
-	d = bus_find_device_by_of_node(&mdio_bus_type, phy_np);
-	if (d) {
-		mdiodev = to_mdio_device(d);
-		if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
-			return to_phy_device(d);
-		put_device(d);
-	}
-
-	return NULL;
-}
-EXPORT_SYMBOL(of_phy_find_device);
-
-/**
- * of_phy_connect - Connect to the phy described in the device tree
- * @dev: pointer to net_device claiming the phy
- * @phy_np: Pointer to device tree node for the PHY
- * @hndlr: Link state callback for the network device
- * @flags: flags to pass to the PHY
- * @iface: PHY data interface type
- *
- * If successful, returns a pointer to the phy_device with the embedded
- * struct device refcount incremented by one, or NULL on failure. The
- * refcount must be dropped by calling phy_disconnect() or phy_detach().
- */
-struct phy_device *of_phy_connect(struct net_device *dev,
-				  struct device_node *phy_np,
-				  void (*hndlr)(struct net_device *), u32 flags,
-				  phy_interface_t iface)
-{
-	struct phy_device *phy = of_phy_find_device(phy_np);
-	int ret;
-
-	if (!phy)
-		return NULL;
-
-	phy->dev_flags |= flags;
-
-	ret = phy_connect_direct(dev, phy, hndlr, iface);
-
-	/* refcount is held by phy_connect_direct() on success */
-	put_device(&phy->mdio.dev);
-
-	return ret ? NULL : phy;
-}
-EXPORT_SYMBOL(of_phy_connect);
-
-/**
- * of_phy_get_and_connect
- * - Get phy node and connect to the phy described in the device tree
- * @dev: pointer to net_device claiming the phy
- * @np: Pointer to device tree node for the net_device claiming the phy
- * @hndlr: Link state callback for the network device
- *
- * If successful, returns a pointer to the phy_device with the embedded
- * struct device refcount incremented by one, or NULL on failure. The
- * refcount must be dropped by calling phy_disconnect() or phy_detach().
- */
-struct phy_device *of_phy_get_and_connect(struct net_device *dev,
-					  struct device_node *np,
-					  void (*hndlr)(struct net_device *))
-{
-	phy_interface_t iface;
-	struct device_node *phy_np;
-	struct phy_device *phy;
-	int ret;
-
-	ret = of_get_phy_mode(np, &iface);
-	if (ret)
-		return NULL;
-	if (of_phy_is_fixed_link(np)) {
-		ret = of_phy_register_fixed_link(np);
-		if (ret < 0) {
-			netdev_err(dev, "broken fixed-link specification\n");
-			return NULL;
-		}
-		phy_np = of_node_get(np);
-	} else {
-		phy_np = of_parse_phandle(np, "phy-handle", 0);
-		if (!phy_np)
-			return NULL;
-	}
-
-	phy = of_phy_connect(dev, phy_np, hndlr, 0, iface);
-
-	of_node_put(phy_np);
-
-	return phy;
-}
-EXPORT_SYMBOL(of_phy_get_and_connect);
-
-/**
- * of_phy_attach - Attach to a PHY without starting the state machine
- * @dev: pointer to net_device claiming the phy
- * @phy_np: Node pointer for the PHY
- * @flags: flags to pass to the PHY
- * @iface: PHY data interface type
- *
- * If successful, returns a pointer to the phy_device with the embedded
- * struct device refcount incremented by one, or NULL on failure. The
- * refcount must be dropped by calling phy_disconnect() or phy_detach().
- */
-struct phy_device *of_phy_attach(struct net_device *dev,
-				 struct device_node *phy_np, u32 flags,
-				 phy_interface_t iface)
-{
-	struct phy_device *phy = of_phy_find_device(phy_np);
-	int ret;
-
-	if (!phy)
-		return NULL;
-
-	ret = phy_attach_direct(dev, phy, flags, iface);
-
-	/* refcount is held by phy_attach_direct() on success */
-	put_device(&phy->mdio.dev);
-
-	return ret ? NULL : phy;
-}
-EXPORT_SYMBOL(of_phy_attach);
-
-/*
- * of_phy_is_fixed_link() and of_phy_register_fixed_link() must
- * support two DT bindings:
- * - the old DT binding, where 'fixed-link' was a property with 5
- *   cells encoding various informations about the fixed PHY
- * - the new DT binding, where 'fixed-link' is a sub-node of the
- *   Ethernet device.
- */
-bool of_phy_is_fixed_link(struct device_node *np)
-{
-	struct device_node *dn;
-	int len, err;
-	const char *managed;
-
-	/* New binding */
-	dn = of_get_child_by_name(np, "fixed-link");
-	if (dn) {
-		of_node_put(dn);
-		return true;
-	}
-
-	err = of_property_read_string(np, "managed", &managed);
-	if (err == 0 && strcmp(managed, "auto") != 0)
-		return true;
-
-	/* Old binding */
-	if (of_get_property(np, "fixed-link", &len) &&
-	    len == (5 * sizeof(__be32)))
-		return true;
-
-	return false;
-}
-EXPORT_SYMBOL(of_phy_is_fixed_link);
-
-int of_phy_register_fixed_link(struct device_node *np)
-{
-	struct fixed_phy_status status = {};
-	struct device_node *fixed_link_node;
-	u32 fixed_link_prop[5];
-	const char *managed;
-
-	if (of_property_read_string(np, "managed", &managed) == 0 &&
-	    strcmp(managed, "in-band-status") == 0) {
-		/* status is zeroed, namely its .link member */
-		goto register_phy;
-	}
-
-	/* New binding */
-	fixed_link_node = of_get_child_by_name(np, "fixed-link");
-	if (fixed_link_node) {
-		status.link = 1;
-		status.duplex = of_property_read_bool(fixed_link_node,
-						      "full-duplex");
-		if (of_property_read_u32(fixed_link_node, "speed",
-					 &status.speed)) {
-			of_node_put(fixed_link_node);
-			return -EINVAL;
-		}
-		status.pause = of_property_read_bool(fixed_link_node, "pause");
-		status.asym_pause = of_property_read_bool(fixed_link_node,
-							  "asym-pause");
-		of_node_put(fixed_link_node);
-
-		goto register_phy;
-	}
-
-	/* Old binding */
-	if (of_property_read_u32_array(np, "fixed-link", fixed_link_prop,
-				       ARRAY_SIZE(fixed_link_prop)) == 0) {
-		status.link = 1;
-		status.duplex = fixed_link_prop[1];
-		status.speed  = fixed_link_prop[2];
-		status.pause  = fixed_link_prop[3];
-		status.asym_pause = fixed_link_prop[4];
-		goto register_phy;
-	}
-
-	return -ENODEV;
-
-register_phy:
-	return PTR_ERR_OR_ZERO(fixed_phy_register(PHY_POLL, &status, np));
-}
-EXPORT_SYMBOL(of_phy_register_fixed_link);
-
-void of_phy_deregister_fixed_link(struct device_node *np)
-{
-	struct phy_device *phydev;
-
-	phydev = of_phy_find_device(np);
-	if (!phydev)
-		return;
-
-	fixed_phy_unregister(phydev);
-
-	put_device(&phydev->mdio.dev);	/* of_phy_find_device() */
-	phy_device_free(phydev);	/* fixed_phy_register() */
-}
-EXPORT_SYMBOL(of_phy_deregister_fixed_link);