PCI Hotplug: cpqphp: fix comment style

Fix up comments from C++ to C-style, wrapping if necessary, etc.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

1 files changed, 173 insertions, 140 deletions

diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
index 573a2702fb6a..2e96bae3c82a 100644
--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -178,17 +178,17 @@ int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
 		if (!rc)
 			return !rc;
 
-		// set the Edge Level Control Register (ELCR)
+		/* set the Edge Level Control Register (ELCR) */
 		temp_word = inb(0x4d0);
 		temp_word |= inb(0x4d1) << 8;
 
 		temp_word |= 0x01 << irq_num;
 
-		// This should only be for x86 as it sets the Edge Level Control Register
-		outb((u8) (temp_word & 0xFF), 0x4d0);
-		outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1);
-		rc = 0;
-	}
+		/* This should only be for x86 as it sets the Edge Level
+		 * Control Register
+		 */
+		outb((u8) (temp_word & 0xFF), 0x4d0); outb((u8) ((temp_word &
+		0xFF00) >> 8), 0x4d1); rc = 0; }
 
 	return rc;
 }
@@ -213,11 +213,11 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev
 	ctrl->pci_bus->number = bus_num;
 
 	for (tdevice = 0; tdevice < 0xFF; tdevice++) {
-		//Scan for access first
+		/* Scan for access first */
 		if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
 			continue;
 		dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice);
-		//Yep we got one. Not a bridge ?
+		/* Yep we got one. Not a bridge ? */
 		if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) {
 			*dev_num = tdevice;
 			dbg("found it !\n");
@@ -225,11 +225,11 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev
 		}
 	}
 	for (tdevice = 0; tdevice < 0xFF; tdevice++) {
-		//Scan for access first
+		/* Scan for access first */
 		if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
 			continue;
 		dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice);
-		//Yep we got one. bridge ?
+		/* Yep we got one. bridge ? */
 		if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
 			pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus);
 			dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice);
@@ -257,7 +257,7 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num
 
 	len = (PCIIRQRoutingInfoLength->size -
 	       sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
-	// Make sure I got at least one entry
+	/* Make sure I got at least one entry */
 	if (len == 0) {
 		kfree(PCIIRQRoutingInfoLength );
 		return -1;
@@ -304,11 +304,14 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num
 
 int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 slot)
 {
-	return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0);	//plain (bridges allowed)
+	/* plain (bridges allowed) */
+	return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0);
 }
 
 
-/* More PCI configuration routines; this time centered around hotplug controller */
+/* More PCI configuration routines; this time centered around hotplug
+ * controller
+ */
 
 
 /*
@@ -339,12 +342,12 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 	int stop_it;
 	int index;
 
-	//              Decide which slots are supported
+	/* Decide which slots are supported */
 
 	if (is_hot_plug) {
-		//*********************************
-		// is_hot_plug is the slot mask
-		//*********************************
+		/*
+		 * is_hot_plug is the slot mask
+		 */
 		FirstSupported = is_hot_plug >> 4;
 		LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1;
 	} else {
@@ -352,13 +355,13 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 		LastSupported = 0x1F;
 	}
 
-	//     Save PCI configuration space for all devices in supported slots
+	/* Save PCI configuration space for all devices in supported slots */
 	ctrl->pci_bus->number = busnumber;
 	for (device = FirstSupported; device <= LastSupported; device++) {
 		ID = 0xFFFFFFFF;
 		rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
 
-		if (ID != 0xFFFFFFFF) {	  //  device in slot
+		if (ID != 0xFFFFFFFF) {	  /* device in slot */
 			rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
 			if (rc)
 				return rc;
@@ -367,7 +370,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 			if (rc)
 				return rc;
 
-			// If multi-function device, set max_functions to 8
+			/* If multi-function device, set max_functions to 8 */
 			if (header_type & 0x80)
 				max_functions = 8;
 			else
@@ -377,18 +380,19 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 
 			do {
 				DevError = 0;
-
-				if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {   // P-P Bridge
-					//  Recurse the subordinate bus
-					//  get the subordinate bus number
+				if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+					/* Recurse the subordinate bus
+					 * get the subordinate bus number
+					 */
 					rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
 					if (rc) {
 						return rc;
 					} else {
 						sub_bus = (int) secondary_bus;
 
-						// Save secondary bus cfg spc
-						// with this recursive call.
+						/* Save secondary bus cfg spc
+						 * with this recursive call.
+						 */
 						rc = cpqhp_save_config(ctrl, sub_bus, 0);
 						if (rc)
 							return rc;
@@ -403,7 +407,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 					new_slot = cpqhp_slot_find(busnumber, device, index++);
 
 				if (!new_slot) {
-					// Setup slot structure.
+					/* Setup slot structure. */
 					new_slot = cpqhp_slot_create(busnumber);
 
 					if (new_slot == NULL)
@@ -415,7 +419,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 				new_slot->function = (u8) function;
 				new_slot->is_a_board = 1;
 				new_slot->switch_save = 0x10;
-				// In case of unsupported board
+				/* In case of unsupported board */
 				new_slot->status = DevError;
 				new_slot->pci_dev = pci_find_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function);
 
@@ -429,14 +433,15 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 
 				stop_it = 0;
 
-				//  this loop skips to the next present function
-				//  reading in Class Code and Header type.
+				/* this loop skips to the next present function
+				 * reading in Class Code and Header type.
+				 */
 
 				while ((function < max_functions)&&(!stop_it)) {
 					rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
-					if (ID == 0xFFFFFFFF) {	 // nothing there.
+					if (ID == 0xFFFFFFFF) {	 /* nothing there. */
 						function++;
-					} else {  // Something there
+					} else {  /* Something there */
 						rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
 						if (rc)
 							return rc;
@@ -450,9 +455,9 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 				}
 
 			} while (function < max_functions);
-		}		// End of IF (device in slot?)
+		}		/* End of IF (device in slot?) */
 		else if (is_hot_plug) {
-			// Setup slot structure with entry for empty slot
+			/* Setup slot structure with entry for empty slot */
 			new_slot = cpqhp_slot_create(busnumber);
 
 			if (new_slot == NULL) {
@@ -466,7 +471,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 			new_slot->presence_save = 0;
 			new_slot->switch_save = 0;
 		}
-	}			// End of FOR loop
+	}			/* End of FOR loop */
 
 	return(0);
 }
@@ -498,11 +503,11 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
 	ctrl->pci_bus->number = new_slot->bus;
 	pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID);
 
-	if (ID != 0xFFFFFFFF) {	  //  device in slot
+	if (ID != 0xFFFFFFFF) {	  /*  device in slot */
 		pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code);
 		pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type);
 
-		if (header_type & 0x80)	// Multi-function device
+		if (header_type & 0x80)	/* Multi-function device */
 			max_functions = 8;
 		else
 			max_functions = 1;
@@ -510,19 +515,21 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
 		function = 0;
 
 		do {
-			if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
-				//  Recurse the subordinate bus
+			if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+				/*  Recurse the subordinate bus */
 				pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus);
 
 				sub_bus = (int) secondary_bus;
 
-				// Save the config headers for the secondary bus.
+				/* Save the config headers for the secondary
+				 * bus.
+				 */
 				rc = cpqhp_save_config(ctrl, sub_bus, 0);
 				if (rc)
 					return(rc);
 				ctrl->pci_bus->number = new_slot->bus;
 
-			}	// End of IF
+			}	/* End of IF */
 
 			new_slot->status = 0;
 
@@ -534,15 +541,15 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
 
 			stop_it = 0;
 
-			//  this loop skips to the next present function
-			//  reading in the Class Code and the Header type.
-
+			/* this loop skips to the next present function
+			 * reading in the Class Code and the Header type.
+			 */
 			while ((function < max_functions) && (!stop_it)) {
 				pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID);
 
-				if (ID == 0xFFFFFFFF) {	 // nothing there.
+				if (ID == 0xFFFFFFFF) {	 /* nothing there. */
 					function++;
-				} else {  // Something there
+				} else {  /* Something there */
 					pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code);
 
 					pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type);
@@ -552,7 +559,7 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
 			}
 
 		} while (function < max_functions);
-	}			// End of IF (device in slot?)
+	}			/* End of IF (device in slot?) */
 	else {
 		return 2;
 	}
@@ -590,11 +597,10 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 		pci_bus->number = func->bus;
 		devfn = PCI_DEVFN(func->device, func->function);
 
-		// Check for Bridge
+		/* Check for Bridge */
 		pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
 		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
-			// PCI-PCI Bridge
 			pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
 
 			sub_bus = (int) secondary_bus;
@@ -610,23 +616,27 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 			}
 			pci_bus->number = func->bus;
 
-			//FIXME: this loop is duplicated in the non-bridge case.  The two could be rolled together
-			// Figure out IO and memory base lengths
+			/* FIXME: this loop is duplicated in the non-bridge
+			 * case.  The two could be rolled together Figure out
+			 * IO and memory base lengths
+			 */
 			for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
 				temp_register = 0xFFFFFFFF;
 				pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
-
-				if (base) {  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (base & 0x01L) {
-						// IO base
-						// set base = amount of IO space requested
+						/* IO base
+						 * set base = amount of IO space
+						 * requested
+						 */
 						base = base & 0xFFFFFFFE;
 						base = (~base) + 1;
 
 						type = 1;
 					} else {
-						// memory base
+						/* memory base */
 						base = base & 0xFFFFFFF0;
 						base = (~base) + 1;
 
@@ -637,32 +647,36 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 					type = 0;
 				}
 
-				// Save information in slot structure
+				/* Save information in slot structure */
 				func->base_length[(cloop - 0x10) >> 2] =
 				base;
 				func->base_type[(cloop - 0x10) >> 2] = type;
 
-			}	// End of base register loop
-
+			}	/* End of base register loop */
 
-		} else if ((header_type & 0x7F) == 0x00) {	  // PCI-PCI Bridge
-			// Figure out IO and memory base lengths
+		} else if ((header_type & 0x7F) == 0x00) {
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
 				temp_register = 0xFFFFFFFF;
 				pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
 
-				if (base) {  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (base & 0x01L) {
-						// IO base
-						// base = amount of IO space requested
+						/* IO base
+						 * base = amount of IO space
+						 * requested
+						 */
 						base = base & 0xFFFFFFFE;
 						base = (~base) + 1;
 
 						type = 1;
 					} else {
-						// memory base
-						// base = amount of memory space requested
+						/* memory base
+						 * base = amount of memory
+						 * space requested
+						 */
 						base = base & 0xFFFFFFF0;
 						base = (~base) + 1;
 
@@ -673,16 +687,16 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 					type = 0;
 				}
 
-				// Save information in slot structure
+				/* Save information in slot structure */
 				func->base_length[(cloop - 0x10) >> 2] = base;
 				func->base_type[(cloop - 0x10) >> 2] = type;
 
-			}	// End of base register loop
+			}	/* End of base register loop */
 
-		} else {	  // Some other unknown header type
+		} else {	  /* Some other unknown header type */
 		}
 
-		// find the next device in this slot
+		/* find the next device in this slot */
 		func = cpqhp_slot_find(func->bus, func->device, index++);
 	}
 
@@ -728,18 +742,18 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 		pci_bus->number = func->bus;
 		devfn = PCI_DEVFN(func->device, func->function);
 
-		// Save the command register
+		/* Save the command register */
 		pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command);
 
-		// disable card
+		/* disable card */
 		command = 0x00;
 		pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
 
-		// Check for Bridge
+		/* Check for Bridge */
 		pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
-		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
-			// Clear Bridge Control Register
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+			/* Clear Bridge Control Register */
 			command = 0x00;
 			pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
 			pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
@@ -755,7 +769,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 			bus_node->next = func->bus_head;
 			func->bus_head = bus_node;
 
-			// Save IO base and Limit registers
+			/* Save IO base and Limit registers */
 			pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base);
 			pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length);
 
@@ -771,7 +785,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 				func->io_head = io_node;
 			}
 
-			// Save memory base and Limit registers
+			/* Save memory base and Limit registers */
 			pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base);
 			pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length);
 
@@ -787,7 +801,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 				func->mem_head = mem_node;
 			}
 
-			// Save prefetchable memory base and Limit registers
+			/* Save prefetchable memory base and Limit registers */
 			pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base);
 			pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length);
 
@@ -802,7 +816,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 				p_mem_node->next = func->p_mem_head;
 				func->p_mem_head = p_mem_node;
 			}
-			// Figure out IO and memory base lengths
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &save_base);
 
@@ -812,11 +826,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 
 				temp_register = base;
 
-				if (base) {  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (((base & 0x03L) == 0x01)
 					    && (save_command & 0x01)) {
-						// IO base
-						// set temp_register = amount of IO space requested
+						/* IO base
+						 * set temp_register = amount
+						 * of IO space requested
+						 */
 						temp_register = base & 0xFFFFFFFE;
 						temp_register = (~temp_register) + 1;
 
@@ -834,7 +851,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x08)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -851,7 +868,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x00)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -868,9 +885,10 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						return(1);
 				}
-			}	// End of base register loop
-		} else if ((header_type & 0x7F) == 0x00) {	  // Standard header
-			// Figure out IO and memory base lengths
+			}	/* End of base register loop */
+		/* Standard header */
+		} else if ((header_type & 0x7F) == 0x00) {
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
 				pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
 
@@ -880,11 +898,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 
 				temp_register = base;
 
-				if (base) {	  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (((base & 0x03L) == 0x01)
 					    && (save_command & 0x01)) {
-						// IO base
-						// set temp_register = amount of IO space requested
+						/* IO base
+						 * set temp_register = amount
+						 * of IO space requested
+						 */
 						temp_register = base & 0xFFFFFFFE;
 						temp_register = (~temp_register) + 1;
 
@@ -901,7 +922,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x08)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -918,7 +939,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x00)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -935,11 +956,12 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						return(1);
 				}
-			}	// End of base register loop
-		} else {	  // Some other unknown header type
+			}	/* End of base register loop */
+		/* Some other unknown header type */
+		} else {
 		}
 
-		// find the next device in this slot
+		/* find the next device in this slot */
 		func = cpqhp_slot_find(func->bus, func->device, index++);
 	}
 
@@ -975,16 +997,17 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func)
 		pci_bus->number = func->bus;
 		devfn = PCI_DEVFN(func->device, func->function);
 
-		// Start at the top of config space so that the control
-		// registers are programmed last
+		/* Start at the top of config space so that the control
+		 * registers are programmed last
+		 */
 		for (cloop = 0x3C; cloop > 0; cloop -= 4) {
 			pci_bus_write_config_dword (pci_bus, devfn, cloop, func->config_space[cloop >> 2]);
 		}
 
 		pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
-		// If this is a bridge device, restore subordinate devices
-		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
+		/* If this is a bridge device, restore subordinate devices */
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 			pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
 
 			sub_bus = (int) secondary_bus;
@@ -1000,8 +1023,9 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func)
 			}
 		} else {
 
-			// Check all the base Address Registers to make sure
-			// they are the same.  If not, the board is different.
+			/* Check all the base Address Registers to make sure
+			 * they are the same.  If not, the board is different.
+			 */
 
 			for (cloop = 16; cloop < 40; cloop += 4) {
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp);
@@ -1058,27 +1082,28 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
 
 		pci_bus_read_config_dword (pci_bus, devfn, PCI_VENDOR_ID, &temp_register);
 
-		// No adapter present
+		/* No adapter present */
 		if (temp_register == 0xFFFFFFFF)
 			return(NO_ADAPTER_PRESENT);
 
 		if (temp_register != func->config_space[0])
 			return(ADAPTER_NOT_SAME);
 
-		// Check for same revision number and class code
+		/* Check for same revision number and class code */
 		pci_bus_read_config_dword (pci_bus, devfn, PCI_CLASS_REVISION, &temp_register);
 
-		// Adapter not the same
+		/* Adapter not the same */
 		if (temp_register != func->config_space[0x08 >> 2])
 			return(ADAPTER_NOT_SAME);
 
-		// Check for Bridge
+		/* Check for Bridge */
 		pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
-		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
-			// In order to continue checking, we must program the
-			// bus registers in the bridge to respond to accesses
-			// for it's subordinate bus(es)
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+			/* In order to continue checking, we must program the
+			 * bus registers in the bridge to respond to accesses
+			 * for its subordinate bus(es)
+			 */
 
 			temp_register = func->config_space[0x18 >> 2];
 			pci_bus_write_config_dword (pci_bus, devfn, PCI_PRIMARY_BUS, temp_register);
@@ -1096,35 +1121,39 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
 			}
 
 		}
-		// Check to see if it is a standard config header
+		/* Check to see if it is a standard config header */
 		else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
-			// Check subsystem vendor and ID
+			/* Check subsystem vendor and ID */
 			pci_bus_read_config_dword (pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register);
 
 			if (temp_register != func->config_space[0x2C >> 2]) {
-				// If it's a SMART-2 and the register isn't filled
-				// in, ignore the difference because
-				// they just have an old rev of the firmware
-
+				/* If it's a SMART-2 and the register isn't
+				 * filled in, ignore the difference because
+				 * they just have an old rev of the firmware
+				 */
 				if (!((func->config_space[0] == 0xAE100E11)
 				      && (temp_register == 0x00L)))
 					return(ADAPTER_NOT_SAME);
 			}
-			// Figure out IO and memory base lengths
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
 				temp_register = 0xFFFFFFFF;
 				pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
-				if (base) {	  // If this register is implemented
+
+				/* If this register is implemented */
+				if (base) {
 					if (base & 0x01L) {
-						// IO base
-						// set base = amount of IO space requested
+						/* IO base
+						 * set base = amount of IO
+						 * space requested
+						 */
 						base = base & 0xFFFFFFFE;
 						base = (~base) + 1;
 
 						type = 1;
 					} else {
-						// memory base
+						/* memory base */
 						base = base & 0xFFFFFFF0;
 						base = (~base) + 1;
 
@@ -1135,23 +1164,24 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
 					type = 0;
 				}
 
-				// Check information in slot structure
+				/* Check information in slot structure */
 				if (func->base_length[(cloop - 0x10) >> 2] != base)
 					return(ADAPTER_NOT_SAME);
 
 				if (func->base_type[(cloop - 0x10) >> 2] != type)
 					return(ADAPTER_NOT_SAME);
 
-			}	// End of base register loop
+			}	/* End of base register loop */
 
-		}		// End of (type 0 config space) else
+		}		/* End of (type 0 config space) else */
 		else {
-			// this is not a type 0 or 1 config space header so
-			// we don't know how to do it
+			/* this is not a type 0 or 1 config space header so
+			 * we don't know how to do it
+			 */
 			return(DEVICE_TYPE_NOT_SUPPORTED);
 		}
 
-		// Get the next function
+		/* Get the next function */
 		func = cpqhp_slot_find(func->bus, func->device, index++);
 	}
 
@@ -1190,7 +1220,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 	if (rom_resource_table == NULL) {
 		return -ENODEV;
 	}
-	// Sum all resources and setup resource maps
+	/* Sum all resources and setup resource maps */
 	unused_IRQ = readl(rom_resource_table + UNUSED_IRQ);
 	dbg("unused_IRQ = %x\n", unused_IRQ);
 
@@ -1262,13 +1292,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 		    dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length,
 		    primary_bus, secondary_bus, max_bus);
 
-		// If this entry isn't for our controller's bus, ignore it
+		/* If this entry isn't for our controller's bus, ignore it */
 		if (primary_bus != ctrl->bus) {
 			i--;
 			one_slot += sizeof (struct slot_rt);
 			continue;
 		}
-		// find out if this entry is for an occupied slot
+		/* find out if this entry is for an occupied slot */
 		ctrl->pci_bus->number = primary_bus;
 		pci_bus_read_config_dword (ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword);
 		dbg("temp_D_word = %x\n", temp_dword);
@@ -1282,13 +1312,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 				func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++);
 			}
 
-			// If we can't find a match, skip this table entry
+			/* If we can't find a match, skip this table entry */
 			if (!func) {
 				i--;
 				one_slot += sizeof (struct slot_rt);
 				continue;
 			}
-			// this may not work and shouldn't be used
+			/* this may not work and shouldn't be used */
 			if (secondary_bus != primary_bus)
 				bridged_slot = 1;
 			else
@@ -1301,7 +1331,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 		}
 
 
-		// If we've got a valid IO base, use it
+		/* If we've got a valid IO base, use it */
 
 		temp_dword = io_base + io_length;
 
@@ -1325,7 +1355,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 			}
 		}
 
-		// If we've got a valid memory base, use it
+		/* If we've got a valid memory base, use it */
 		temp_dword = mem_base + mem_length;
 		if ((mem_base) && (temp_dword < 0x10000)) {
 			mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL);
@@ -1348,8 +1378,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 			}
 		}
 
-		// If we've got a valid prefetchable memory base, and
-		// the base + length isn't greater than 0xFFFF
+		/* If we've got a valid prefetchable memory base, and
+		 * the base + length isn't greater than 0xFFFF
+		 */
 		temp_dword = pre_mem_base + pre_mem_length;
 		if ((pre_mem_base) && (temp_dword < 0x10000)) {
 			p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL);
@@ -1372,9 +1403,10 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 			}
 		}
 
-		// If we've got a valid bus number, use it
-		// The second condition is to ignore bus numbers on
-		// populated slots that don't have PCI-PCI bridges
+		/* If we've got a valid bus number, use it
+		 * The second condition is to ignore bus numbers on
+		 * populated slots that don't have PCI-PCI bridges
+		 */
 		if (secondary_bus && (secondary_bus != primary_bus)) {
 			bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL);
 			if (!bus_node)
@@ -1398,8 +1430,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 		one_slot += sizeof (struct slot_rt);
 	}
 
-	// If all of the following fail, we don't have any resources for
-	// hot plug add
+	/* If all of the following fail, we don't have any resources for
+	 * hot plug add
+	 */
 	rc = 1;
 	rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
 	rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));