Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

58 files changed, 2779 insertions, 855 deletions

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index b1ecefa2a23d..7858a117e80b 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -21,17 +21,6 @@ config PCI_MSI
 
 	   If you don't know what to do here, say N.
 
-config PCI_LEGACY
-	bool "Enable deprecated pci_find_* API"
-	depends on PCI
-	default y
-	help
-	  Say Y here if you want to include support for the deprecated
-	  pci_find_device() API.  Most drivers have been converted over
-	  to using the proper hotplug APIs, so this option serves to
-	  include/exclude only a few drivers that are still using this
-	  API.
-
 config PCI_DEBUG
 	bool "PCI Debugging"
 	depends on PCI && DEBUG_KERNEL
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 4df48d58eaa6..0b51857fbaf7 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -2,14 +2,13 @@
 # Makefile for the PCI bus specific drivers.
 #
 
-obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o \
+obj-y		+= access.o bus.o probe.o remove.o pci.o \
 			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
-			irq.o
+			irq.o vpd.o
 obj-$(CONFIG_PROC_FS) += proc.o
 obj-$(CONFIG_SYSFS) += slot.o
 
-obj-$(CONFIG_PCI_LEGACY) += legacy.o
-CFLAGS_legacy.o += -Wno-deprecated-declarations
+obj-$(CONFIG_PCI_QUIRKS) += quirks.o
 
 # Build PCI Express stuff if needed
 obj-$(CONFIG_PCIEPORTBUS) += pcie/
@@ -49,6 +48,7 @@ obj-$(CONFIG_PPC) += setup-bus.o
 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
 obj-$(CONFIG_X86_VISWS) += setup-irq.o
 obj-$(CONFIG_MN10300) += setup-bus.o
+obj-$(CONFIG_MICROBLAZE) += setup-bus.o
 
 #
 # ACPI Related PCI FW Functions
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index cef28a79103f..26301cb25e7f 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -17,6 +17,52 @@
 
 #include "pci.h"
 
+void pci_bus_add_resource(struct pci_bus *bus, struct resource *res,
+			  unsigned int flags)
+{
+	struct pci_bus_resource *bus_res;
+
+	bus_res = kzalloc(sizeof(struct pci_bus_resource), GFP_KERNEL);
+	if (!bus_res) {
+		dev_err(&bus->dev, "can't add %pR resource\n", res);
+		return;
+	}
+
+	bus_res->res = res;
+	bus_res->flags = flags;
+	list_add_tail(&bus_res->list, &bus->resources);
+}
+
+struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n)
+{
+	struct pci_bus_resource *bus_res;
+
+	if (n < PCI_BRIDGE_RESOURCE_NUM)
+		return bus->resource[n];
+
+	n -= PCI_BRIDGE_RESOURCE_NUM;
+	list_for_each_entry(bus_res, &bus->resources, list) {
+		if (n-- == 0)
+			return bus_res->res;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(pci_bus_resource_n);
+
+void pci_bus_remove_resources(struct pci_bus *bus)
+{
+	struct pci_bus_resource *bus_res, *tmp;
+	int i;
+
+	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
+		bus->resource[i] = 0;
+
+	list_for_each_entry_safe(bus_res, tmp, &bus->resources, list) {
+		list_del(&bus_res->list);
+		kfree(bus_res);
+	}
+}
+
 /**
  * pci_bus_alloc_resource - allocate a resource from a parent bus
  * @bus: PCI bus
@@ -36,11 +82,14 @@ int
 pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 		resource_size_t size, resource_size_t align,
 		resource_size_t min, unsigned int type_mask,
-		void (*alignf)(void *, struct resource *, resource_size_t,
-				resource_size_t),
+		resource_size_t (*alignf)(void *,
+					  const struct resource *,
+					  resource_size_t,
+					  resource_size_t),
 		void *alignf_data)
 {
 	int i, ret = -ENOMEM;
+	struct resource *r;
 	resource_size_t max = -1;
 
 	type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
@@ -49,8 +98,7 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 	if (!(res->flags & IORESOURCE_MEM_64))
 		max = PCIBIOS_MAX_MEM_32;
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		struct resource *r = bus->resource[i];
+	pci_bus_for_each_resource(bus, r, i) {
 		if (!r)
 			continue;
 
@@ -240,9 +288,9 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 			next = dev->bus_list.next;
 
 		/* Run device routines with the device locked */
-		down(&dev->dev.sem);
+		device_lock(&dev->dev);
 		retval = cb(dev, userdata);
-		up(&dev->dev.sem);
+		device_unlock(&dev->dev);
 		if (retval)
 			break;
 	}
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 4dd7114964ac..efa9f2de51c1 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -332,8 +332,6 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
 	slot->hotplug_slot->info->attention_status = 0;
 	slot->hotplug_slot->info->latch_status = acpiphp_get_latch_status(slot->acpi_slot);
 	slot->hotplug_slot->info->adapter_status = acpiphp_get_adapter_status(slot->acpi_slot);
-	slot->hotplug_slot->info->max_bus_speed = PCI_SPEED_UNKNOWN;
-	slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
 	acpiphp_slot->slot = slot;
 	snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 8e952fdab764..b5dad9f37453 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -720,12 +720,6 @@ static int acpiphp_bus_add(struct acpiphp_func *func)
 			-ret_val);
 		goto acpiphp_bus_add_out;
 	}
-	/*
-	 * try to start anyway.  We could have failed to add
-	 * simply because this bus had previously been added
-	 * on another add.  Don't bother with the return value
-	 * we just keep going.
-	 */
 	ret_val = acpi_bus_start(device);
 
 acpiphp_bus_add_out:
@@ -755,6 +749,24 @@ static int acpiphp_bus_trim(acpi_handle handle)
 	return retval;
 }
 
+static void acpiphp_set_acpi_region(struct acpiphp_slot *slot)
+{
+	struct acpiphp_func *func;
+	union acpi_object params[2];
+	struct acpi_object_list arg_list;
+
+	list_for_each_entry(func, &slot->funcs, sibling) {
+		arg_list.count = 2;
+		arg_list.pointer = params;
+		params[0].type = ACPI_TYPE_INTEGER;
+		params[0].integer.value = ACPI_ADR_SPACE_PCI_CONFIG;
+		params[1].type = ACPI_TYPE_INTEGER;
+		params[1].integer.value = 1;
+		/* _REG is optional, we don't care about if there is failure */
+		acpi_evaluate_object(func->handle, "_REG", &arg_list, NULL);
+	}
+}
+
 /**
  * enable_device - enable, configure a slot
  * @slot: slot to be enabled
@@ -811,6 +823,7 @@ static int __ref enable_device(struct acpiphp_slot *slot)
 	pci_bus_assign_resources(bus);
 	acpiphp_sanitize_bus(bus);
 	acpiphp_set_hpp_values(bus);
+	acpiphp_set_acpi_region(slot);
 	pci_enable_bridges(bus);
 	pci_bus_add_devices(bus);
 
diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c
index 148fb463b81c..fb3f84661bdc 100644
--- a/drivers/pci/hotplug/cpcihp_generic.c
+++ b/drivers/pci/hotplug/cpcihp_generic.c
@@ -162,6 +162,7 @@ static int __init cpcihp_generic_init(void)
 	dev = pci_get_slot(bus, PCI_DEVFN(bridge_slot, 0));
 	if(!dev || dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
 		err("Invalid bridge device %s", bridge);
+		pci_dev_put(dev);
 		return -EINVAL;
 	}
 	bus = dev->subordinate;
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index 9c6a9fd26812..d8ffc7366801 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -310,8 +310,6 @@ struct controller {
 	u8 first_slot;
 	u8 add_support;
 	u8 push_flag;
-	enum pci_bus_speed speed;
-	enum pci_bus_speed speed_capability;
 	u8 push_button;			/* 0 = no pushbutton, 1 = pushbutton present */
 	u8 slot_switch_type;		/* 0 = no switch, 1 = switch present */
 	u8 defeature_PHP;		/* 0 = PHP not supported, 1 = PHP supported */
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 075b4f4b6e0d..f184d1d2ecbe 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -583,30 +583,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
 	return 0;
 }
 
-static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-	struct controller *ctrl = slot->ctrl;
-
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
-	*value = ctrl->speed_capability;
-
-	return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-	struct controller *ctrl = slot->ctrl;
-
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
-	*value = ctrl->speed;
-
-	return 0;
-}
-
 static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
 	.set_attention_status =	set_attention_status,
 	.enable_slot =		process_SI,
@@ -616,8 +592,6 @@ static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
 	.get_attention_status =	get_attention_status,
 	.get_latch_status =	get_latch_status,
 	.get_adapter_status =	get_adapter_status,
-	.get_max_bus_speed =	get_max_bus_speed,
-	.get_cur_bus_speed =	get_cur_bus_speed,
 };
 
 #define SLOT_NAME_SIZE 10
@@ -629,6 +603,7 @@ static int ctrl_slot_setup(struct controller *ctrl,
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *hotplug_slot_info;
+	struct pci_bus *bus = ctrl->pci_bus;
 	u8 number_of_slots;
 	u8 slot_device;
 	u8 slot_number;
@@ -694,7 +669,7 @@ static int ctrl_slot_setup(struct controller *ctrl,
 			slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
 		if (is_slot66mhz(slot))
 			slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
-		if (ctrl->speed == PCI_SPEED_66MHz)
+		if (bus->cur_bus_speed == PCI_SPEED_66MHz)
 			slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
 
 		ctrl_slot =
@@ -844,6 +819,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	u32 rc;
 	struct controller *ctrl;
 	struct pci_func *func;
+	struct pci_bus *bus;
 	int err;
 
 	err = pci_enable_device(pdev);
@@ -852,6 +828,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			pci_name(pdev), err);
 		return err;
 	}
+	bus = pdev->subordinate;
 
 	/* Need to read VID early b/c it's used to differentiate CPQ and INTC
 	 * discovery
@@ -929,22 +906,22 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			pci_read_config_byte(pdev, 0x41, &bus_cap);
 			if (bus_cap & 0x80) {
 				dbg("bus max supports 133MHz PCI-X\n");
-				ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
+				bus->max_bus_speed = PCI_SPEED_133MHz_PCIX;
 				break;
 			}
 			if (bus_cap & 0x40) {
 				dbg("bus max supports 100MHz PCI-X\n");
-				ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+				bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
 				break;
 			}
 			if (bus_cap & 20) {
 				dbg("bus max supports 66MHz PCI-X\n");
-				ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
+				bus->max_bus_speed = PCI_SPEED_66MHz_PCIX;
 				break;
 			}
 			if (bus_cap & 10) {
 				dbg("bus max supports 66MHz PCI\n");
-				ctrl->speed_capability = PCI_SPEED_66MHz;
+				bus->max_bus_speed = PCI_SPEED_66MHz;
 				break;
 			}
 
@@ -955,7 +932,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		case PCI_SUB_HPC_ID:
 			/* Original 6500/7000 implementation */
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 			ctrl->push_button = 0;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -966,7 +943,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			/* First Pushbutton implementation */
 			ctrl->push_flag = 1;
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 			ctrl->push_button = 1;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -976,7 +953,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		case PCI_SUB_HPC_ID_INTC:
 			/* Third party (6500/7000) */
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 			ctrl->push_button = 0;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -987,7 +964,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			/* First 66 Mhz implementation */
 			ctrl->push_flag = 1;
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_66MHz;
+			bus->max_bus_speed = PCI_SPEED_66MHz;
 			ctrl->push_button = 1;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -998,7 +975,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			/* First PCI-X implementation, 100MHz */
 			ctrl->push_flag = 1;
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+			bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
 			ctrl->push_button = 1;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -1015,9 +992,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	case PCI_VENDOR_ID_INTEL:
 		/* Check for speed capability (0=33, 1=66) */
 		if (subsystem_deviceid & 0x0001)
-			ctrl->speed_capability = PCI_SPEED_66MHz;
+			bus->max_bus_speed = PCI_SPEED_66MHz;
 		else
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 
 		/* Check for push button */
 		if (subsystem_deviceid & 0x0002)
@@ -1079,7 +1056,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 					pdev->bus->number);
 
 	dbg("Hotplug controller capabilities:\n");
-	dbg("    speed_capability       %d\n", ctrl->speed_capability);
+	dbg("    speed_capability       %d\n", bus->max_bus_speed);
 	dbg("    slot_switch_type       %s\n", ctrl->slot_switch_type ?
 					"switch present" : "no switch");
 	dbg("    defeature_PHP          %s\n", ctrl->defeature_PHP ?
@@ -1142,7 +1119,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	/* Check for 66Mhz operation */
-	ctrl->speed = get_controller_speed(ctrl);
+	bus->cur_bus_speed = get_controller_speed(ctrl);
 
 
 	/********************************************************
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 0ff689afa757..e43908d9b5df 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -1130,12 +1130,13 @@ static int is_bridge(struct pci_func * func)
 static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
 {
 	struct slot *slot;
+	struct pci_bus *bus = ctrl->pci_bus;
 	u8 reg;
 	u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
 	u16 reg16;
 	u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
 
-	if (ctrl->speed == adapter_speed)
+	if (bus->cur_bus_speed == adapter_speed)
 		return 0;
 
 	/* We don't allow freq/mode changes if we find another adapter running
@@ -1152,7 +1153,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 		 * lower speed/mode, we allow the new adapter to function at
 		 * this rate if supported
 		 */
-		if (ctrl->speed < adapter_speed)
+		if (bus->cur_bus_speed < adapter_speed)
 			return 0;
 
 		return 1;
@@ -1161,20 +1162,20 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 	/* If the controller doesn't support freq/mode changes and the
 	 * controller is running at a higher mode, we bail
 	 */
-	if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
+	if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability))
 		return 1;
 
 	/* But we allow the adapter to run at a lower rate if possible */
-	if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
+	if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability))
 		return 0;
 
 	/* We try to set the max speed supported by both the adapter and
 	 * controller
 	 */
-	if (ctrl->speed_capability < adapter_speed) {
-		if (ctrl->speed == ctrl->speed_capability)
+	if (bus->max_bus_speed < adapter_speed) {
+		if (bus->cur_bus_speed == bus->max_bus_speed)
 			return 0;
-		adapter_speed = ctrl->speed_capability;
+		adapter_speed = bus->max_bus_speed;
 	}
 
 	writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
@@ -1229,8 +1230,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 	pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
 
 	/* Only if mode change...*/
-	if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
-		((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) 
+	if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
+		((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) 
 			set_SOGO(ctrl);
 
 	wait_for_ctrl_irq(ctrl);
@@ -1243,7 +1244,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 	set_SOGO(ctrl);
 	wait_for_ctrl_irq(ctrl);
 
-	ctrl->speed = adapter_speed;
+	bus->cur_bus_speed = adapter_speed;
 	slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
 	info("Successfully changed frequency/mode for adapter in slot %d\n",
@@ -1269,6 +1270,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
  */
 static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 {
+	struct pci_bus *bus = ctrl->pci_bus;
 	u8 hp_slot;
 	u8 temp_byte;
 	u8 adapter_speed;
@@ -1309,7 +1311,7 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 		wait_for_ctrl_irq (ctrl);
 
 		adapter_speed = get_adapter_speed(ctrl, hp_slot);
-		if (ctrl->speed != adapter_speed)
+		if (bus->cur_bus_speed != adapter_speed)
 			if (set_controller_speed(ctrl, adapter_speed, hp_slot))
 				rc = WRONG_BUS_FREQUENCY;
 
@@ -1426,6 +1428,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 	u32 temp_register = 0xFFFFFFFF;
 	u32 rc = 0;
 	struct pci_func *new_slot = NULL;
+	struct pci_bus *bus = ctrl->pci_bus;
 	struct slot *p_slot;
 	struct resource_lists res_lists;
 
@@ -1456,7 +1459,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 	wait_for_ctrl_irq (ctrl);
 
 	adapter_speed = get_adapter_speed(ctrl, hp_slot);
-	if (ctrl->speed != adapter_speed)
+	if (bus->cur_bus_speed != adapter_speed)
 		if (set_controller_speed(ctrl, adapter_speed, hp_slot))
 			rc = WRONG_BUS_FREQUENCY;
 
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 6151389fd903..0a894efd4b9b 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -73,7 +73,7 @@ static void legacy_release(struct kobject *kobj)
 }
 
 static struct kobj_type legacy_ktype = {
-	.sysfs_ops = &(struct sysfs_ops){
+	.sysfs_ops = &(const struct sysfs_ops){
 		.store = legacy_store, .show = legacy_show
 	},
 	.release = &legacy_release,
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 7485ffda950c..d934dd4fa873 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -395,89 +395,40 @@ static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 * value)
 	return rc;
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static int get_max_bus_speed(struct slot *slot)
 {
-	int rc = -ENODEV;
-	struct slot *pslot;
+	int rc;
 	u8 mode = 0;
+	enum pci_bus_speed speed;
+	struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus;
 
-	debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
-		hotplug_slot, value);
+	debug("%s - Entry slot[%p]\n", __func__, slot);
 
 	ibmphp_lock_operations();
-
-	if (hotplug_slot) {
-		pslot = hotplug_slot->private;
-		if (pslot) {
-			rc = 0;
-			mode = pslot->supported_bus_mode;
-			*value = pslot->supported_speed; 
-			switch (*value) {
-			case BUS_SPEED_33:
-				break;
-			case BUS_SPEED_66:
-				if (mode == BUS_MODE_PCIX) 
-					*value += 0x01;
-				break;
-			case BUS_SPEED_100:
-			case BUS_SPEED_133:
-				*value = pslot->supported_speed + 0x01;
-				break;
-			default:
-				/* Note (will need to change): there would be soon 256, 512 also */
-				rc = -ENODEV;
-			}
-		}
-	}
-
+	mode = slot->supported_bus_mode;
+	speed = slot->supported_speed; 
 	ibmphp_unlock_operations();
-	debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
-	return rc;
-}
 
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	int rc = -ENODEV;
-	struct slot *pslot;
-	u8 mode = 0;
-
-	debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
-		hotplug_slot, value);
-
-	ibmphp_lock_operations();
-
-	if (hotplug_slot) {
-		pslot = hotplug_slot->private;
-		if (pslot) {
-			rc = get_cur_bus_info(&pslot);
-			if (!rc) {
-				mode = pslot->bus_on->current_bus_mode;
-				*value = pslot->bus_on->current_speed;
-				switch (*value) {
-				case BUS_SPEED_33:
-					break;
-				case BUS_SPEED_66:
-					if (mode == BUS_MODE_PCIX) 
-						*value += 0x01;
-					else if (mode == BUS_MODE_PCI)
-						;
-					else
-						*value = PCI_SPEED_UNKNOWN;
-					break;
-				case BUS_SPEED_100:
-				case BUS_SPEED_133:
-					*value += 0x01;
-					break;
-				default:
-					/* Note of change: there would also be 256, 512 soon */
-					rc = -ENODEV;
-				}
-			}
-		}
+	switch (speed) {
+	case BUS_SPEED_33:
+		break;
+	case BUS_SPEED_66:
+		if (mode == BUS_MODE_PCIX) 
+			speed += 0x01;
+		break;
+	case BUS_SPEED_100:
+	case BUS_SPEED_133:
+		speed += 0x01;
+		break;
+	default:
+		/* Note (will need to change): there would be soon 256, 512 also */
+		rc = -ENODEV;
 	}
 
-	ibmphp_unlock_operations();
-	debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
+	if (!rc)
+		bus->max_bus_speed = speed;
+
+	debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed);
 	return rc;
 }
 
@@ -572,6 +523,7 @@ static int __init init_ops(void)
 		if (slot_cur->bus_on->current_speed == 0xFF) 
 			if (get_cur_bus_info(&slot_cur)) 
 				return -1;
+		get_max_bus_speed(slot_cur);
 
 		if (slot_cur->ctrl->options == 0xFF)
 			if (get_hpc_options(slot_cur, &slot_cur->ctrl->options))
@@ -655,6 +607,7 @@ static int validate(struct slot *slot_cur, int opn)
 int ibmphp_update_slot_info(struct slot *slot_cur)
 {
 	struct hotplug_slot_info *info;
+	struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus;
 	int rc;
 	u8 bus_speed;
 	u8 mode;
@@ -700,8 +653,7 @@ int ibmphp_update_slot_info(struct slot *slot_cur)
 			bus_speed = PCI_SPEED_UNKNOWN;
 	}
 
-	info->cur_bus_speed = bus_speed;
-	info->max_bus_speed = slot_cur->hotplug_slot->info->max_bus_speed;
+	bus->cur_bus_speed = bus_speed;
 	// To do: bus_names 
 	
 	rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
@@ -1326,8 +1278,6 @@ struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
 	.get_attention_status =		get_attention_status,
 	.get_latch_status =		get_latch_status,
 	.get_adapter_status =		get_adapter_present,
-	.get_max_bus_speed =		get_max_bus_speed,
-	.get_cur_bus_speed =		get_cur_bus_speed,
 /*	.get_max_adapter_speed =	get_max_adapter_speed,
 	.get_bus_name_status =		get_bus_name,
 */
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index c1abac8ab5c3..5becbdee4027 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -245,7 +245,7 @@ static void __init print_ebda_hpc (void)
 
 int __init ibmphp_access_ebda (void)
 {
-	u8 format, num_ctlrs, rio_complete, hs_complete;
+	u8 format, num_ctlrs, rio_complete, hs_complete, ebda_sz;
 	u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base;
 	int rc = 0;
 
@@ -260,7 +260,16 @@ int __init ibmphp_access_ebda (void)
 	iounmap (io_mem);
 	debug ("returned ebda segment: %x\n", ebda_seg);
 	
-	io_mem = ioremap(ebda_seg<<4, 1024);
+	io_mem = ioremap(ebda_seg<<4, 1);
+	if (!io_mem)
+		return -ENOMEM;
+	ebda_sz = readb(io_mem);
+	iounmap(io_mem);
+	debug("ebda size: %d(KiB)\n", ebda_sz);
+	if (ebda_sz == 0)
+		return -ENOMEM;
+
+	io_mem = ioremap(ebda_seg<<4, (ebda_sz * 1024));
 	if (!io_mem )
 		return -ENOMEM;
 	next_offset = 0x180;
diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c
index c7084f0eca5a..1aaf3f32d3cd 100644
--- a/drivers/pci/hotplug/ibmphp_hpc.c
+++ b/drivers/pci/hotplug/ibmphp_hpc.c
@@ -35,6 +35,7 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/sched.h>
+#include <linux/semaphore.h>
 #include <linux/kthread.h>
 #include "ibmphp.h"
 
diff --git a/drivers/pci/hotplug/ibmphp_res.c b/drivers/pci/hotplug/ibmphp_res.c
index ec73294d1fa6..e2dc289f767c 100644
--- a/drivers/pci/hotplug/ibmphp_res.c
+++ b/drivers/pci/hotplug/ibmphp_res.c
@@ -40,7 +40,7 @@ static void update_resources (struct bus_node *bus_cur, int type, int rangeno);
 static int once_over (void);
 static int remove_ranges (struct bus_node *, struct bus_node *);
 static int update_bridge_ranges (struct bus_node **);
-static int add_range (int type, struct range_node *, struct bus_node *);
+static int add_bus_range (int type, struct range_node *, struct bus_node *);
 static void fix_resources (struct bus_node *);
 static struct bus_node *find_bus_wprev (u8, struct bus_node **, u8);
 
@@ -133,7 +133,7 @@ static int __init alloc_bus_range (struct bus_node **new_bus, struct range_node
 		newrange->rangeno = 1;
 	else {
 		/* need to insert our range */
-		add_range (flag, newrange, newbus);
+		add_bus_range (flag, newrange, newbus);
 		debug ("%d resource Primary Bus inserted on bus %x [%x - %x]\n", flag, newbus->busno, newrange->start, newrange->end);
 	}
 
@@ -384,7 +384,7 @@ int __init ibmphp_rsrc_init (void)
  * Input: type of the resource, range to add, current bus
  * Output: 0 or -1, bus and range ptrs 
  ********************************************************************************/
-static int add_range (int type, struct range_node *range, struct bus_node *bus_cur)
+static int add_bus_range (int type, struct range_node *range, struct bus_node *bus_cur)
 {
 	struct range_node *range_cur = NULL;
 	struct range_node *range_prev;
@@ -455,7 +455,7 @@ static int add_range (int type, struct range_node *range, struct bus_node *bus_c
 
 /*******************************************************************************
  * This routine goes through the list of resources of type 'type' and updates
- * the range numbers that they correspond to.  It was called from add_range fnc
+ * the range numbers that they correspond to.  It was called from add_bus_range fnc
  *
  * Input: bus, type of the resource, the rangeno starting from which to update
  ******************************************************************************/
@@ -1999,7 +1999,7 @@ static int __init update_bridge_ranges (struct bus_node **bus)
 
 							if (bus_sec->noIORanges > 0) {
 								if (!range_exists_already (range, bus_sec, IO)) {
-									add_range (IO, range, bus_sec);
+									add_bus_range (IO, range, bus_sec);
 									++bus_sec->noIORanges;
 								} else {
 									kfree (range);
@@ -2048,7 +2048,7 @@ static int __init update_bridge_ranges (struct bus_node **bus)
 
 							if (bus_sec->noMemRanges > 0) {
 								if (!range_exists_already (range, bus_sec, MEM)) {
-									add_range (MEM, range, bus_sec);
+									add_bus_range (MEM, range, bus_sec);
 									++bus_sec->noMemRanges;
 								} else {
 									kfree (range);
@@ -2102,7 +2102,7 @@ static int __init update_bridge_ranges (struct bus_node **bus)
 
 							if (bus_sec->noPFMemRanges > 0) {
 								if (!range_exists_already (range, bus_sec, PFMEM)) {
-									add_range (PFMEM, range, bus_sec);
+									add_bus_range (PFMEM, range, bus_sec);
 									++bus_sec->noPFMemRanges;
 								} else {
 									kfree (range);
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 38183a534b65..728b119f71ad 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -64,32 +64,6 @@ static int debug;
 static LIST_HEAD(pci_hotplug_slot_list);
 static DEFINE_MUTEX(pci_hp_mutex);
 
-/* these strings match up with the values in pci_bus_speed */
-static char *pci_bus_speed_strings[] = {
-	"33 MHz PCI",		/* 0x00 */
-	"66 MHz PCI",		/* 0x01 */
-	"66 MHz PCI-X",		/* 0x02 */
-	"100 MHz PCI-X",	/* 0x03 */
-	"133 MHz PCI-X",	/* 0x04 */
-	NULL,			/* 0x05 */
-	NULL,			/* 0x06 */
-	NULL,			/* 0x07 */
-	NULL,			/* 0x08 */
-	"66 MHz PCI-X 266",	/* 0x09 */
-	"100 MHz PCI-X 266",	/* 0x0a */
-	"133 MHz PCI-X 266",	/* 0x0b */
-	NULL,			/* 0x0c */
-	NULL,			/* 0x0d */
-	NULL,			/* 0x0e */
-	NULL,			/* 0x0f */
-	NULL,			/* 0x10 */
-	"66 MHz PCI-X 533",	/* 0x11 */
-	"100 MHz PCI-X 533",	/* 0x12 */
-	"133 MHz PCI-X 533",	/* 0x13 */
-	"2.5 GT/s PCIe",	/* 0x14 */
-	"5.0 GT/s PCIe",	/* 0x15 */
-};
-
 #ifdef CONFIG_HOTPLUG_PCI_CPCI
 extern int cpci_hotplug_init(int debug);
 extern void cpci_hotplug_exit(void);
@@ -118,8 +92,6 @@ GET_STATUS(power_status, u8)
 GET_STATUS(attention_status, u8)
 GET_STATUS(latch_status, u8)
 GET_STATUS(adapter_status, u8)
-GET_STATUS(max_bus_speed, enum pci_bus_speed)
-GET_STATUS(cur_bus_speed, enum pci_bus_speed)
 
 static ssize_t power_read_file(struct pci_slot *slot, char *buf)
 {
@@ -263,60 +235,6 @@ static struct pci_slot_attribute hotplug_slot_attr_presence = {
 	.show = presence_read_file,
 };
 
-static char *unknown_speed = "Unknown bus speed";
-
-static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
-	char *speed_string;
-	int retval;
-	enum pci_bus_speed value;
-	
-	retval = get_max_bus_speed(slot->hotplug, &value);
-	if (retval)
-		goto exit;
-
-	if (value == PCI_SPEED_UNKNOWN)
-		speed_string = unknown_speed;
-	else
-		speed_string = pci_bus_speed_strings[value];
-	
-	retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
-	return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = {
-	.attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO},
-	.show = max_bus_speed_read_file,
-};
-
-static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
-	char *speed_string;
-	int retval;
-	enum pci_bus_speed value;
-
-	retval = get_cur_bus_speed(slot->hotplug, &value);
-	if (retval)
-		goto exit;
-
-	if (value == PCI_SPEED_UNKNOWN)
-		speed_string = unknown_speed;
-	else
-		speed_string = pci_bus_speed_strings[value];
-	
-	retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
-	return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = {
-	.attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO},
-	.show = cur_bus_speed_read_file,
-};
-
 static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf,
 		size_t count)
 {
@@ -391,26 +309,6 @@ static bool has_adapter_file(struct pci_slot *pci_slot)
 	return false;
 }
 
-static bool has_max_bus_speed_file(struct pci_slot *pci_slot)
-{
-	struct hotplug_slot *slot = pci_slot->hotplug;
-	if ((!slot) || (!slot->ops))
-		return false;
-	if (slot->ops->get_max_bus_speed)
-		return true;
-	return false;
-}
-
-static bool has_cur_bus_speed_file(struct pci_slot *pci_slot)
-{
-	struct hotplug_slot *slot = pci_slot->hotplug;
-	if ((!slot) || (!slot->ops))
-		return false;
-	if (slot->ops->get_cur_bus_speed)
-		return true;
-	return false;
-}
-
 static bool has_test_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
@@ -456,20 +354,6 @@ static int fs_add_slot(struct pci_slot *slot)
 			goto exit_adapter;
 	}
 
-	if (has_max_bus_speed_file(slot)) {
-		retval = sysfs_create_file(&slot->kobj,
-					&hotplug_slot_attr_max_bus_speed.attr);
-		if (retval)
-			goto exit_max_speed;
-	}
-
-	if (has_cur_bus_speed_file(slot)) {
-		retval = sysfs_create_file(&slot->kobj,
-					&hotplug_slot_attr_cur_bus_speed.attr);
-		if (retval)
-			goto exit_cur_speed;
-	}
-
 	if (has_test_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_test.attr);
@@ -480,14 +364,6 @@ static int fs_add_slot(struct pci_slot *slot)
 	goto exit;
 
 exit_test:
-	if (has_cur_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_cur_bus_speed.attr);
-exit_cur_speed:
-	if (has_max_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_max_bus_speed.attr);
-exit_max_speed:
 	if (has_adapter_file(slot))
 		sysfs_remove_file(&slot->kobj,
 				  &hotplug_slot_attr_presence.attr);
@@ -523,14 +399,6 @@ static void fs_remove_slot(struct pci_slot *slot)
 		sysfs_remove_file(&slot->kobj,
 				  &hotplug_slot_attr_presence.attr);
 
-	if (has_max_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_max_bus_speed.attr);
-
-	if (has_cur_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_cur_bus_speed.attr);
-
 	if (has_test_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr);
 
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 5674b2075bdc..920f820edf87 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -69,8 +69,6 @@ static int get_power_status	(struct hotplug_slot *slot, u8 *value);
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
 /**
  * release_slot - free up the memory used by a slot
@@ -113,8 +111,6 @@ static int init_slot(struct controller *ctrl)
 	ops->disable_slot = disable_slot;
 	ops->get_power_status = get_power_status;
 	ops->get_adapter_status = get_adapter_status;
-	ops->get_max_bus_speed = get_max_bus_speed;
-	ops->get_cur_bus_speed = get_cur_bus_speed;
 	if (MRL_SENS(ctrl))
 		ops->get_latch_status = get_latch_status;
 	if (ATTN_LED(ctrl)) {
@@ -227,27 +223,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
 	return pciehp_get_adapter_status(slot, value);
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
-				enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	return pciehp_get_max_link_speed(slot, value);
-}
-
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	return pciehp_get_cur_link_speed(slot, value);
-}
-
 static int pciehp_probe(struct pcie_device *dev)
 {
 	int rc;
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index d6ac1b261dd9..9a7f247e8ac1 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -341,6 +341,7 @@ void pciehp_queue_pushbutton_work(struct work_struct *work)
 		p_slot->state = POWERON_STATE;
 		break;
 	default:
+		kfree(info);
 		goto out;
 	}
 	queue_work(pciehp_wq, &info->work);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 10040d58c8ef..9665d6b17a2a 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -492,6 +492,7 @@ int pciehp_power_on_slot(struct slot * slot)
 	u16 slot_cmd;
 	u16 cmd_mask;
 	u16 slot_status;
+	u16 lnk_status;
 	int retval = 0;
 
 	/* Clear sticky power-fault bit from previous power failures */
@@ -523,6 +524,14 @@ int pciehp_power_on_slot(struct slot * slot)
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
 
+	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
+	if (retval) {
+		ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n",
+				__func__);
+		return retval;
+	}
+	pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
+
 	return retval;
 }
 
@@ -610,37 +619,6 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
-	struct controller *ctrl = slot->ctrl;
-	enum pcie_link_speed lnk_speed;
-	u32	lnk_cap;
-	int retval = 0;
-
-	retval = pciehp_readl(ctrl, PCI_EXP_LNKCAP, &lnk_cap);
-	if (retval) {
-		ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__);
-		return retval;
-	}
-
-	switch (lnk_cap & 0x000F) {
-	case 1:
-		lnk_speed = PCIE_2_5GB;
-		break;
-	case 2:
-		lnk_speed = PCIE_5_0GB;
-		break;
-	default:
-		lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
-		break;
-	}
-
-	*value = lnk_speed;
-	ctrl_dbg(ctrl, "Max link speed = %d\n", lnk_speed);
-
-	return retval;
-}
-
 int pciehp_get_max_lnk_width(struct slot *slot,
 				 enum pcie_link_width *value)
 {
@@ -691,38 +669,6 @@ int pciehp_get_max_lnk_width(struct slot *slot,
 	return retval;
 }
 
-int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
-	struct controller *ctrl = slot->ctrl;
-	enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN;
-	int retval = 0;
-	u16 lnk_status;
-
-	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
-	if (retval) {
-		ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n",
-			 __func__);
-		return retval;
-	}
-
-	switch (lnk_status & PCI_EXP_LNKSTA_CLS) {
-	case 1:
-		lnk_speed = PCIE_2_5GB;
-		break;
-	case 2:
-		lnk_speed = PCIE_5_0GB;
-		break;
-	default:
-		lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
-		break;
-	}
-
-	*value = lnk_speed;
-	ctrl_dbg(ctrl, "Current link speed = %d\n", lnk_speed);
-
-	return retval;
-}
-
 int pciehp_get_cur_lnk_width(struct slot *slot,
 				 enum pcie_link_width *value)
 {
@@ -886,9 +832,8 @@ static inline void dbg_ctrl(struct controller *ctrl)
 	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 		if (!pci_resource_len(pdev, i))
 			continue;
-		ctrl_info(ctrl, "  PCI resource [%d]     : 0x%llx@0x%llx\n",
-			  i, (unsigned long long)pci_resource_len(pdev, i),
-			  (unsigned long long)pci_resource_start(pdev, i));
+		ctrl_info(ctrl, "  PCI resource [%d]     : %pR\n",
+			  i, &pdev->resource[i]);
 	}
 	ctrl_info(ctrl, "Slot Capabilities      : 0x%08x\n", ctrl->slot_cap);
 	ctrl_info(ctrl, "  Physical Slot Number : %d\n", PSN(ctrl));
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 21733108adde..0a16444c14c9 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -53,17 +53,15 @@ static int __ref pciehp_add_bridge(struct pci_dev *dev)
 		busnr = pci_scan_bridge(parent, dev, busnr, pass);
 	if (!dev->subordinate)
 		return -1;
-	pci_bus_size_bridges(dev->subordinate);
-	pci_bus_assign_resources(parent);
-	pci_enable_bridges(parent);
-	pci_bus_add_devices(parent);
+
 	return 0;
 }
 
 int pciehp_configure_device(struct slot *p_slot)
 {
 	struct pci_dev *dev;
-	struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
+	struct pci_dev *bridge = p_slot->ctrl->pcie->port;
+	struct pci_bus *parent = bridge->subordinate;
 	int num, fn;
 	struct controller *ctrl = p_slot->ctrl;
 
@@ -96,12 +94,25 @@ int pciehp_configure_device(struct slot *p_slot)
 				(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
 			pciehp_add_bridge(dev);
 		}
+		pci_dev_put(dev);
+	}
+
+	pci_assign_unassigned_bridge_resources(bridge);
+
+	for (fn = 0; fn < 8; fn++) {
+		dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
+		if (!dev)
+			continue;
+		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+			pci_dev_put(dev);
+			continue;
+		}
 		pci_configure_slot(dev);
 		pci_dev_put(dev);
 	}
 
-	pci_bus_assign_resources(parent);
 	pci_bus_add_devices(parent);
+
 	return 0;
 }
 
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index c159223389ec..dcaae725fd79 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -130,10 +130,9 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value)
 	return 0;
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static enum pci_bus_speed get_max_bus_speed(struct slot *slot)
 {
-	struct slot *slot = (struct slot *)hotplug_slot->private;
-
+	enum pci_bus_speed speed;
 	switch (slot->type) {
 	case 1:
 	case 2:
@@ -141,30 +140,30 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe
 	case 4:
 	case 5:
 	case 6:
-		*value = PCI_SPEED_33MHz;	/* speed for case 1-6 */
+		speed = PCI_SPEED_33MHz;	/* speed for case 1-6 */
 		break;
 	case 7:
 	case 8:
-		*value = PCI_SPEED_66MHz;
+		speed = PCI_SPEED_66MHz;
 		break;
 	case 11:
 	case 14:
-		*value = PCI_SPEED_66MHz_PCIX;
+		speed = PCI_SPEED_66MHz_PCIX;
 		break;
 	case 12:
 	case 15:
-		*value = PCI_SPEED_100MHz_PCIX;
+		speed = PCI_SPEED_100MHz_PCIX;
 		break;
 	case 13:
 	case 16:
-		*value = PCI_SPEED_133MHz_PCIX;
+		speed = PCI_SPEED_133MHz_PCIX;
 		break;
 	default:
-		*value = PCI_SPEED_UNKNOWN;
+		speed = PCI_SPEED_UNKNOWN;
 		break;
-
 	}
-	return 0;
+
+	return speed;
 }
 
 static int get_children_props(struct device_node *dn, const int **drc_indexes,
@@ -408,6 +407,8 @@ static int enable_slot(struct hotplug_slot *hotplug_slot)
 		slot->state = NOT_VALID;
 		return -EINVAL;
 	}
+
+	slot->bus->max_bus_speed = get_max_bus_speed(slot);
 	return 0;
 }
 
@@ -429,7 +430,6 @@ struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
 	.get_power_status = get_power_status,
 	.get_attention_status = get_attention_status,
 	.get_adapter_status = get_adapter_status,
-	.get_max_bus_speed = get_max_bus_speed,
 };
 
 module_init(rpaphp_init);
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index bd588eb8e922..d2627e1c3ac1 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -121,7 +121,7 @@ struct controller {
 #define PCI_DEVICE_ID_AMD_GOLAM_7450	0x7450
 #define PCI_DEVICE_ID_AMD_POGO_7458	0x7458
 
-/* AMD PCIX bridge registers */
+/* AMD PCI-X bridge registers */
 #define PCIX_MEM_BASE_LIMIT_OFFSET	0x1C
 #define PCIX_MISCII_OFFSET		0x48
 #define PCIX_MISC_BRIDGE_ERRORS_OFFSET	0x80
@@ -333,8 +333,6 @@ struct hpc_ops {
 	int (*set_attention_status)(struct slot *slot, u8 status);
 	int (*get_latch_status)(struct slot *slot, u8 *status);
 	int (*get_adapter_status)(struct slot *slot, u8 *status);
-	int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
-	int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
 	int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed);
 	int (*get_mode1_ECC_cap)(struct slot *slot, u8 *mode);
 	int (*get_prog_int)(struct slot *slot, u8 *prog_int);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 8a520a3d0f59..a5062297f488 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -65,8 +65,6 @@ static int get_power_status	(struct hotplug_slot *slot, u8 *value);
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
 static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
 	.set_attention_status =	set_attention_status,
@@ -76,8 +74,6 @@ static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
 	.get_attention_status =	get_attention_status,
 	.get_latch_status =	get_latch_status,
 	.get_adapter_status =	get_adapter_status,
-	.get_max_bus_speed =	get_max_bus_speed,
-	.get_cur_bus_speed =	get_cur_bus_speed,
 };
 
 /**
@@ -279,37 +275,6 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
 	return 0;
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
-				enum pci_bus_speed *value)
-{
-	struct slot *slot = get_slot(hotplug_slot);
-	int retval;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	retval = slot->hpc_ops->get_max_bus_speed(slot, value);
-	if (retval < 0)
-		*value = PCI_SPEED_UNKNOWN;
-
-	return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = get_slot(hotplug_slot);
-	int retval;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
-	if (retval < 0)
-		*value = PCI_SPEED_UNKNOWN;
-
-	return 0;
-}
-
 static int is_shpc_capable(struct pci_dev *dev)
 {
 	if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index b8ab2796e66a..3bba0c0888ff 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -285,17 +285,8 @@ static int board_added(struct slot *p_slot)
 		return WRONG_BUS_FREQUENCY;
 	}
 
-	rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
-	if (rc) {
-		ctrl_err(ctrl, "Can't get bus operation speed\n");
-		return WRONG_BUS_FREQUENCY;
-	}
-
-	rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
-	if (rc) {
-		ctrl_err(ctrl, "Can't get max bus operation speed\n");
-		msp = bsp;
-	}
+	bsp = ctrl->pci_dev->bus->cur_bus_speed;
+	msp = ctrl->pci_dev->bus->max_bus_speed;
 
 	/* Check if there are other slots or devices on the same bus */
 	if (!list_empty(&ctrl->pci_dev->subordinate->devices))
@@ -462,6 +453,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work)
 		p_slot->state = POWERON_STATE;
 		break;
 	default:
+		kfree(info);
 		goto out;
 	}
 	queue_work(shpchp_wq, &info->work);
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 86dc39847769..5f5e8d2e3552 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -660,6 +660,75 @@ static int hpc_slot_disable(struct slot * slot)
 	return retval;
 }
 
+static int shpc_get_cur_bus_speed(struct controller *ctrl)
+{
+	int retval = 0;
+	struct pci_bus *bus = ctrl->pci_dev->subordinate;
+	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
+	u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
+	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
+	u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
+
+	if ((pi == 1) && (speed_mode > 4)) {
+		retval = -ENODEV;
+		goto out;
+	}
+
+	switch (speed_mode) {
+	case 0x0:
+		bus_speed = PCI_SPEED_33MHz;
+		break;
+	case 0x1:
+		bus_speed = PCI_SPEED_66MHz;
+		break;
+	case 0x2:
+		bus_speed = PCI_SPEED_66MHz_PCIX;
+		break;
+	case 0x3:
+		bus_speed = PCI_SPEED_100MHz_PCIX;
+		break;
+	case 0x4:
+		bus_speed = PCI_SPEED_133MHz_PCIX;
+		break;
+	case 0x5:
+		bus_speed = PCI_SPEED_66MHz_PCIX_ECC;
+		break;
+	case 0x6:
+		bus_speed = PCI_SPEED_100MHz_PCIX_ECC;
+		break;
+	case 0x7:
+		bus_speed = PCI_SPEED_133MHz_PCIX_ECC;
+		break;
+	case 0x8:
+		bus_speed = PCI_SPEED_66MHz_PCIX_266;
+		break;
+	case 0x9:
+		bus_speed = PCI_SPEED_100MHz_PCIX_266;
+		break;
+	case 0xa:
+		bus_speed = PCI_SPEED_133MHz_PCIX_266;
+		break;
+	case 0xb:
+		bus_speed = PCI_SPEED_66MHz_PCIX_533;
+		break;
+	case 0xc:
+		bus_speed = PCI_SPEED_100MHz_PCIX_533;
+		break;
+	case 0xd:
+		bus_speed = PCI_SPEED_133MHz_PCIX_533;
+		break;
+	default:
+		retval = -ENODEV;
+		break;
+	}
+
+ out:
+	bus->cur_bus_speed = bus_speed;
+	dbg("Current bus speed = %d\n", bus_speed);
+	return retval;
+}
+
+
 static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
 {
 	int retval;
@@ -720,6 +789,8 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
 	retval = shpc_write_cmd(slot, 0, cmd);
 	if (retval)
 		ctrl_err(ctrl, "%s: Write command failed!\n", __func__);
+	else
+		shpc_get_cur_bus_speed(ctrl);
 
 	return retval;
 }
@@ -803,10 +874,10 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
+static int shpc_get_max_bus_speed(struct controller *ctrl)
 {
 	int retval = 0;
-	struct controller *ctrl = slot->ctrl;
+	struct pci_bus *bus = ctrl->pci_dev->subordinate;
 	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
 	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
 	u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1);
@@ -842,79 +913,12 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 			retval = -ENODEV;
 	}
 
-	*value = bus_speed;
+	bus->max_bus_speed = bus_speed;
 	ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed);
 
 	return retval;
 }
 
-static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
-{
-	int retval = 0;
-	struct controller *ctrl = slot->ctrl;
-	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
-	u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
-	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
-	u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
-
-	if ((pi == 1) && (speed_mode > 4)) {
-		*value = PCI_SPEED_UNKNOWN;
-		return -ENODEV;
-	}
-
-	switch (speed_mode) {
-	case 0x0:
-		*value = PCI_SPEED_33MHz;
-		break;
-	case 0x1:
-		*value = PCI_SPEED_66MHz;
-		break;
-	case 0x2:
-		*value = PCI_SPEED_66MHz_PCIX;
-		break;
-	case 0x3:
-		*value = PCI_SPEED_100MHz_PCIX;
-		break;
-	case 0x4:
-		*value = PCI_SPEED_133MHz_PCIX;
-		break;
-	case 0x5:
-		*value = PCI_SPEED_66MHz_PCIX_ECC;
-		break;
-	case 0x6:
-		*value = PCI_SPEED_100MHz_PCIX_ECC;
-		break;
-	case 0x7:
-		*value = PCI_SPEED_133MHz_PCIX_ECC;
-		break;
-	case 0x8:
-		*value = PCI_SPEED_66MHz_PCIX_266;
-		break;
-	case 0x9:
-		*value = PCI_SPEED_100MHz_PCIX_266;
-		break;
-	case 0xa:
-		*value = PCI_SPEED_133MHz_PCIX_266;
-		break;
-	case 0xb:
-		*value = PCI_SPEED_66MHz_PCIX_533;
-		break;
-	case 0xc:
-		*value = PCI_SPEED_100MHz_PCIX_533;
-		break;
-	case 0xd:
-		*value = PCI_SPEED_133MHz_PCIX_533;
-		break;
-	default:
-		*value = PCI_SPEED_UNKNOWN;
-		retval = -ENODEV;
-		break;
-	}
-
-	ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed);
-	return retval;
-}
-
 static struct hpc_ops shpchp_hpc_ops = {
 	.power_on_slot			= hpc_power_on_slot,
 	.slot_enable			= hpc_slot_enable,
@@ -926,8 +930,6 @@ static struct hpc_ops shpchp_hpc_ops = {
 	.get_latch_status		= hpc_get_latch_status,
 	.get_adapter_status		= hpc_get_adapter_status,
 
-	.get_max_bus_speed		= hpc_get_max_bus_speed,
-	.get_cur_bus_speed		= hpc_get_cur_bus_speed,
 	.get_adapter_speed		= hpc_get_adapter_speed,
 	.get_mode1_ECC_cap		= hpc_get_mode1_ECC_cap,
 	.get_prog_int			= hpc_get_prog_int,
@@ -1086,6 +1088,9 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
 	}
 	ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq);
 
+	shpc_get_max_bus_speed(ctrl);
+	shpc_get_cur_bus_speed(ctrl);
+
 	/*
 	 * If this is the first controller to be initialized,
 	 * initialize the shpchpd work queue
diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c
index 29fa9d26adae..071b7dc0094b 100644
--- a/drivers/pci/hotplug/shpchp_sysfs.c
+++ b/drivers/pci/hotplug/shpchp_sysfs.c
@@ -47,8 +47,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha
 	bus = pdev->subordinate;
 
 	out += sprintf(buf, "Free resources: memory\n");
-	for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
-		res = bus->resource[index];
+	pci_bus_for_each_resource(bus, res, index) {
 		if (res && (res->flags & IORESOURCE_MEM) &&
 				!(res->flags & IORESOURCE_PREFETCH)) {
 			out += sprintf(out, "start = %8.8llx, "
@@ -58,8 +57,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha
 		}
 	}
 	out += sprintf(out, "Free resources: prefetchable memory\n");
-	for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
-		res = bus->resource[index];
+	pci_bus_for_each_resource(bus, res, index) {
 		if (res && (res->flags & IORESOURCE_MEM) &&
 			       (res->flags & IORESOURCE_PREFETCH)) {
 			out += sprintf(out, "start = %8.8llx, "
@@ -69,8 +67,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha
 		}
 	}
 	out += sprintf(out, "Free resources: IO\n");
-	for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
-		res = bus->resource[index];
+	pci_bus_for_each_resource(bus, res, index) {
 		if (res && (res->flags & IORESOURCE_IO)) {
 			out += sprintf(out, "start = %8.8llx, "
 					"length = %8.8llx\n",
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index e56f9bed6f2b..417312528ddf 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -305,7 +305,7 @@ struct device_domain_info {
 	int segment;		/* PCI domain */
 	u8 bus;			/* PCI bus number */
 	u8 devfn;		/* PCI devfn number */
-	struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */
+	struct pci_dev *dev; /* it's NULL for PCIe-to-PCI bridge */
 	struct intel_iommu *iommu; /* IOMMU used by this device */
 	struct dmar_domain *domain; /* pointer to domain */
 };
@@ -1604,7 +1604,7 @@ domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev,
 			return ret;
 		parent = parent->bus->self;
 	}
-	if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */
+	if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */
 		return domain_context_mapping_one(domain,
 					pci_domain_nr(tmp->subordinate),
 					tmp->subordinate->number, 0,
@@ -3325,7 +3325,7 @@ static void iommu_detach_dependent_devices(struct intel_iommu *iommu,
 					 parent->devfn);
 			parent = parent->bus->self;
 		}
-		if (pci_is_pcie(tmp)) /* this is a PCIE-to-PCI bridge */
+		if (pci_is_pcie(tmp)) /* this is a PCIe-to-PCI bridge */
 			iommu_detach_dev(iommu,
 				tmp->subordinate->number, 0);
 		else /* this is a legacy PCI bridge */
diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
index 8b65a489581b..95b849130ad4 100644
--- a/drivers/pci/intr_remapping.c
+++ b/drivers/pci/intr_remapping.c
@@ -528,7 +528,7 @@ int set_msi_sid(struct irte *irte, struct pci_dev *dev)
 
 	bridge = pci_find_upstream_pcie_bridge(dev);
 	if (bridge) {
-		if (pci_is_pcie(bridge))/* this is a PCIE-to-PCI/PCIX bridge */
+		if (pci_is_pcie(bridge))/* this is a PCIe-to-PCI/PCIX bridge */
 			set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16,
 				(bridge->bus->number << 8) | dev->bus->number);
 		else /* this is a legacy PCI bridge */
diff --git a/drivers/pci/ioapic.c b/drivers/pci/ioapic.c
index 3e0d7b5dd1b9..fb9fdf4a42bf 100644
--- a/drivers/pci/ioapic.c
+++ b/drivers/pci/ioapic.c
@@ -31,9 +31,9 @@ static int ioapic_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	acpi_status status;
 	unsigned long long gsb;
 	struct ioapic *ioapic;
-	u64 addr;
 	int ret;
 	char *type;
+	struct resource *res;
 
 	handle = DEVICE_ACPI_HANDLE(&dev->dev);
 	if (!handle)
@@ -69,13 +69,12 @@ static int ioapic_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	if (pci_request_region(dev, 0, type))
 		goto exit_disable;
 
-	addr = pci_resource_start(dev, 0);
-	if (acpi_register_ioapic(ioapic->handle, addr, ioapic->gsi_base))
+	res = &dev->resource[0];
+	if (acpi_register_ioapic(ioapic->handle, res->start, ioapic->gsi_base))
 		goto exit_release;
 
 	pci_set_drvdata(dev, ioapic);
-	dev_info(&dev->dev, "%s at %#llx, GSI %u\n", type, addr,
-		 ioapic->gsi_base);
+	dev_info(&dev->dev, "%s at %pR, GSI %u\n", type, res, ioapic->gsi_base);
 	return 0;
 
 exit_release:
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index b2a448e19fe6..3e5ab2bf6a5c 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -706,6 +706,21 @@ irqreturn_t pci_sriov_migration(struct pci_dev *dev)
 }
 EXPORT_SYMBOL_GPL(pci_sriov_migration);
 
+/**
+ * pci_num_vf - return number of VFs associated with a PF device_release_driver
+ * @dev: the PCI device
+ *
+ * Returns number of VFs, or 0 if SR-IOV is not enabled.
+ */
+int pci_num_vf(struct pci_dev *dev)
+{
+	if (!dev || !dev->is_physfn)
+		return 0;
+	else
+		return dev->sriov->nr_virtfn;
+}
+EXPORT_SYMBOL_GPL(pci_num_vf);
+
 static int ats_alloc_one(struct pci_dev *dev, int ps)
 {
 	int pos;
diff --git a/drivers/pci/legacy.c b/drivers/pci/legacy.c
deleted file mode 100644
index 871f65c15936..000000000000
--- a/drivers/pci/legacy.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include "pci.h"
-
-/**
- * pci_find_device - begin or continue searching for a PCI device by vendor/device id
- * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
- * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
- * @from: Previous PCI device found in search, or %NULL for new search.
- *
- * Iterates through the list of known PCI devices.  If a PCI device is found
- * with a matching @vendor and @device, a pointer to its device structure is
- * returned.  Otherwise, %NULL is returned.
- * A new search is initiated by passing %NULL as the @from argument.
- * Otherwise if @from is not %NULL, searches continue from next device
- * on the global list.
- *
- * NOTE: Do not use this function any more; use pci_get_device() instead, as
- * the PCI device returned by this function can disappear at any moment in
- * time.
- */
-struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device,
-				struct pci_dev *from)
-{
-	struct pci_dev *pdev;
-
-	pci_dev_get(from);
-	pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
-	pci_dev_put(pdev);
-	return pdev;
-}
-EXPORT_SYMBOL(pci_find_device);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index cc617ddd33d0..2e7a3bf13824 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -16,8 +16,144 @@
 #include <acpi/acpi_bus.h>
 
 #include <linux/pci-acpi.h>
+#include <linux/pm_runtime.h>
 #include "pci.h"
 
+static DEFINE_MUTEX(pci_acpi_pm_notify_mtx);
+
+/**
+ * pci_acpi_wake_bus - Wake-up notification handler for root buses.
+ * @handle: ACPI handle of a device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: PCI root bus to wake up devices on.
+ */
+static void pci_acpi_wake_bus(acpi_handle handle, u32 event, void *context)
+{
+	struct pci_bus *pci_bus = context;
+
+	if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_bus)
+		pci_pme_wakeup_bus(pci_bus);
+}
+
+/**
+ * pci_acpi_wake_dev - Wake-up notification handler for PCI devices.
+ * @handle: ACPI handle of a device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: PCI device object to wake up.
+ */
+static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
+{
+	struct pci_dev *pci_dev = context;
+
+	if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) {
+		pci_check_pme_status(pci_dev);
+		pm_runtime_resume(&pci_dev->dev);
+		if (pci_dev->subordinate)
+			pci_pme_wakeup_bus(pci_dev->subordinate);
+	}
+}
+
+/**
+ * add_pm_notifier - Register PM notifier for given ACPI device.
+ * @dev: ACPI device to add the notifier for.
+ * @context: PCI device or bus to check for PME status if an event is signaled.
+ *
+ * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of
+ * PM wake-up events.  For example, wake-up events may be generated for bridges
+ * if one of the devices below the bridge is signaling PME, even if the bridge
+ * itself doesn't have a wake-up GPE associated with it.
+ */
+static acpi_status add_pm_notifier(struct acpi_device *dev,
+				   acpi_notify_handler handler,
+				   void *context)
+{
+	acpi_status status = AE_ALREADY_EXISTS;
+
+	mutex_lock(&pci_acpi_pm_notify_mtx);
+
+	if (dev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_install_notify_handler(dev->handle,
+					     ACPI_SYSTEM_NOTIFY,
+					     handler, context);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	dev->wakeup.flags.notifier_present = true;
+
+ out:
+	mutex_unlock(&pci_acpi_pm_notify_mtx);
+	return status;
+}
+
+/**
+ * remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @dev: ACPI device to remove the notifier from.
+ */
+static acpi_status remove_pm_notifier(struct acpi_device *dev,
+				      acpi_notify_handler handler)
+{
+	acpi_status status = AE_BAD_PARAMETER;
+
+	mutex_lock(&pci_acpi_pm_notify_mtx);
+
+	if (!dev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_remove_notify_handler(dev->handle,
+					    ACPI_SYSTEM_NOTIFY,
+					    handler);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	dev->wakeup.flags.notifier_present = false;
+
+ out:
+	mutex_unlock(&pci_acpi_pm_notify_mtx);
+	return status;
+}
+
+/**
+ * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus.
+ * @dev: ACPI device to add the notifier for.
+ * @pci_bus: PCI bus to walk checking for PME status if an event is signaled.
+ */
+acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
+					 struct pci_bus *pci_bus)
+{
+	return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
+}
+
+/**
+ * pci_acpi_remove_bus_pm_notifier - Unregister PCI bus PM notifier.
+ * @dev: ACPI device to remove the notifier from.
+ */
+acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
+{
+	return remove_pm_notifier(dev, pci_acpi_wake_bus);
+}
+
+/**
+ * pci_acpi_add_pm_notifier - Register PM notifier for given PCI device.
+ * @dev: ACPI device to add the notifier for.
+ * @pci_dev: PCI device to check for the PME status if an event is signaled.
+ */
+acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
+				     struct pci_dev *pci_dev)
+{
+	return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
+}
+
+/**
+ * pci_acpi_remove_pm_notifier - Unregister PCI device PM notifier.
+ * @dev: ACPI device to remove the notifier from.
+ */
+acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
+{
+	return remove_pm_notifier(dev, pci_acpi_wake_dev);
+}
+
 /*
  * _SxD returns the D-state with the highest power
  * (lowest D-state number) supported in the S-state "x".
@@ -112,11 +248,7 @@ static bool acpi_pci_can_wakeup(struct pci_dev *dev)
 static void acpi_pci_propagate_wakeup_enable(struct pci_bus *bus, bool enable)
 {
 	while (bus->parent) {
-		struct pci_dev *bridge = bus->self;
-		int ret;
-
-		ret = acpi_pm_device_sleep_wake(&bridge->dev, enable);
-		if (!ret || pci_is_pcie(bridge))
+		if (!acpi_pm_device_sleep_wake(&bus->self->dev, enable))
 			return;
 		bus = bus->parent;
 	}
@@ -131,9 +263,81 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable)
 	if (acpi_pci_can_wakeup(dev))
 		return acpi_pm_device_sleep_wake(&dev->dev, enable);
 
-	if (!pci_is_pcie(dev))
-		acpi_pci_propagate_wakeup_enable(dev->bus, enable);
+	acpi_pci_propagate_wakeup_enable(dev->bus, enable);
+	return 0;
+}
+
+/**
+ * acpi_dev_run_wake - Enable/disable wake-up for given device.
+ * @phys_dev: Device to enable/disable the platform to wake-up the system for.
+ * @enable: Whether enable or disable the wake-up functionality.
+ *
+ * Find the ACPI device object corresponding to @pci_dev and try to
+ * enable/disable the GPE associated with it.
+ */
+static int acpi_dev_run_wake(struct device *phys_dev, bool enable)
+{
+	struct acpi_device *dev;
+	acpi_handle handle;
+	int error = -ENODEV;
+
+	if (!device_run_wake(phys_dev))
+		return -EINVAL;
+
+	handle = DEVICE_ACPI_HANDLE(phys_dev);
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
+		dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	if (enable) {
+		if (!dev->wakeup.run_wake_count++) {
+			acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
+			acpi_enable_gpe(dev->wakeup.gpe_device,
+					dev->wakeup.gpe_number,
+					ACPI_GPE_TYPE_RUNTIME);
+		}
+	} else if (dev->wakeup.run_wake_count > 0) {
+		if (!--dev->wakeup.run_wake_count) {
+			acpi_disable_gpe(dev->wakeup.gpe_device,
+					 dev->wakeup.gpe_number,
+					 ACPI_GPE_TYPE_RUNTIME);
+			acpi_disable_wakeup_device_power(dev);
+		}
+	} else {
+		error = -EALREADY;
+	}
+
+	return error;
+}
+
+static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
+{
+	while (bus->parent) {
+		struct pci_dev *bridge = bus->self;
+
+		if (bridge->pme_interrupt)
+			return;
+		if (!acpi_dev_run_wake(&bridge->dev, enable))
+			return;
+		bus = bus->parent;
+	}
+
+	/* We have reached the root bus. */
+	if (bus->bridge)
+		acpi_dev_run_wake(bus->bridge, enable);
+}
+
+static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
+{
+	if (dev->pme_interrupt)
+		return 0;
+
+	if (!acpi_dev_run_wake(&dev->dev, enable))
+		return 0;
 
+	acpi_pci_propagate_run_wake(dev->bus, enable);
 	return 0;
 }
 
@@ -143,13 +347,14 @@ static struct pci_platform_pm_ops acpi_pci_platform_pm = {
 	.choose_state = acpi_pci_choose_state,
 	.can_wakeup = acpi_pci_can_wakeup,
 	.sleep_wake = acpi_pci_sleep_wake,
+	.run_wake = acpi_pci_run_wake,
 };
 
 /* ACPI bus type */
 static int acpi_pci_find_device(struct device *dev, acpi_handle *handle)
 {
 	struct pci_dev * pci_dev;
-	acpi_integer	addr;
+	u64	addr;
 
 	pci_dev = to_pci_dev(dev);
 	/* Please ref to ACPI spec for the syntax of _ADR */
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index e5d47be3c6d7..f9a0aec3abcf 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -17,6 +17,7 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/cpu.h>
+#include <linux/pm_runtime.h>
 #include "pci.h"
 
 struct pci_dynid {
@@ -404,6 +405,35 @@ static void pci_device_shutdown(struct device *dev)
 	pci_msix_shutdown(pci_dev);
 }
 
+#ifdef CONFIG_PM_OPS
+
+/* Auxiliary functions used for system resume and run-time resume. */
+
+/**
+ * pci_restore_standard_config - restore standard config registers of PCI device
+ * @pci_dev: PCI device to handle
+ */
+static int pci_restore_standard_config(struct pci_dev *pci_dev)
+{
+	pci_update_current_state(pci_dev, PCI_UNKNOWN);
+
+	if (pci_dev->current_state != PCI_D0) {
+		int error = pci_set_power_state(pci_dev, PCI_D0);
+		if (error)
+			return error;
+	}
+
+	return pci_restore_state(pci_dev);
+}
+
+static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
+{
+	pci_restore_standard_config(pci_dev);
+	pci_fixup_device(pci_fixup_resume_early, pci_dev);
+}
+
+#endif
+
 #ifdef CONFIG_PM_SLEEP
 
 /*
@@ -520,29 +550,6 @@ static int pci_legacy_resume(struct device *dev)
 
 /* Auxiliary functions used by the new power management framework */
 
-/**
- * pci_restore_standard_config - restore standard config registers of PCI device
- * @pci_dev: PCI device to handle
- */
-static int pci_restore_standard_config(struct pci_dev *pci_dev)
-{
-	pci_update_current_state(pci_dev, PCI_UNKNOWN);
-
-	if (pci_dev->current_state != PCI_D0) {
-		int error = pci_set_power_state(pci_dev, PCI_D0);
-		if (error)
-			return error;
-	}
-
-	return pci_restore_state(pci_dev);
-}
-
-static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
-{
-	pci_restore_standard_config(pci_dev);
-	pci_fixup_device(pci_fixup_resume_early, pci_dev);
-}
-
 static void pci_pm_default_resume(struct pci_dev *pci_dev)
 {
 	pci_fixup_device(pci_fixup_resume, pci_dev);
@@ -581,6 +588,17 @@ static int pci_pm_prepare(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	/*
+	 * PCI devices suspended at run time need to be resumed at this
+	 * point, because in general it is necessary to reconfigure them for
+	 * system suspend.  Namely, if the device is supposed to wake up the
+	 * system from the sleep state, we may need to reconfigure it for this
+	 * purpose.  In turn, if the device is not supposed to wake up the
+	 * system from the sleep state, we'll have to prevent it from signaling
+	 * wake-up.
+	 */
+	pm_runtime_resume(dev);
+
 	if (drv && drv->pm && drv->pm->prepare)
 		error = drv->pm->prepare(dev);
 
@@ -595,6 +613,13 @@ static void pci_pm_complete(struct device *dev)
 		drv->pm->complete(dev);
 }
 
+#else /* !CONFIG_PM_SLEEP */
+
+#define pci_pm_prepare	NULL
+#define pci_pm_complete	NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
 #ifdef CONFIG_SUSPEND
 
 static int pci_pm_suspend(struct device *dev)
@@ -681,7 +706,7 @@ static int pci_pm_resume_noirq(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
-	pci_pm_default_resume_noirq(pci_dev);
+	pci_pm_default_resume_early(pci_dev);
 
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
@@ -879,7 +904,7 @@ static int pci_pm_restore_noirq(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
-	pci_pm_default_resume_noirq(pci_dev);
+	pci_pm_default_resume_early(pci_dev);
 
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
@@ -931,6 +956,84 @@ static int pci_pm_restore(struct device *dev)
 
 #endif /* !CONFIG_HIBERNATION */
 
+#ifdef CONFIG_PM_RUNTIME
+
+static int pci_pm_runtime_suspend(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	pci_power_t prev = pci_dev->current_state;
+	int error;
+
+	if (!pm || !pm->runtime_suspend)
+		return -ENOSYS;
+
+	error = pm->runtime_suspend(dev);
+	suspend_report_result(pm->runtime_suspend, error);
+	if (error)
+		return error;
+
+	pci_fixup_device(pci_fixup_suspend, pci_dev);
+
+	if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
+	    && pci_dev->current_state != PCI_UNKNOWN) {
+		WARN_ONCE(pci_dev->current_state != prev,
+			"PCI PM: State of device not saved by %pF\n",
+			pm->runtime_suspend);
+		return 0;
+	}
+
+	if (!pci_dev->state_saved)
+		pci_save_state(pci_dev);
+
+	pci_finish_runtime_suspend(pci_dev);
+
+	return 0;
+}
+
+static int pci_pm_runtime_resume(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (!pm || !pm->runtime_resume)
+		return -ENOSYS;
+
+	pci_pm_default_resume_early(pci_dev);
+	__pci_enable_wake(pci_dev, PCI_D0, true, false);
+	pci_fixup_device(pci_fixup_resume, pci_dev);
+
+	return pm->runtime_resume(dev);
+}
+
+static int pci_pm_runtime_idle(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (!pm)
+		return -ENOSYS;
+
+	if (pm->runtime_idle) {
+		int ret = pm->runtime_idle(dev);
+		if (ret)
+			return ret;
+	}
+
+	pm_runtime_suspend(dev);
+
+	return 0;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+#define pci_pm_runtime_suspend	NULL
+#define pci_pm_runtime_resume	NULL
+#define pci_pm_runtime_idle	NULL
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_OPS
+
 const struct dev_pm_ops pci_dev_pm_ops = {
 	.prepare = pci_pm_prepare,
 	.complete = pci_pm_complete,
@@ -946,15 +1049,18 @@ const struct dev_pm_ops pci_dev_pm_ops = {
 	.thaw_noirq = pci_pm_thaw_noirq,
 	.poweroff_noirq = pci_pm_poweroff_noirq,
 	.restore_noirq = pci_pm_restore_noirq,
+	.runtime_suspend = pci_pm_runtime_suspend,
+	.runtime_resume = pci_pm_runtime_resume,
+	.runtime_idle = pci_pm_runtime_idle,
 };
 
 #define PCI_PM_OPS_PTR	(&pci_dev_pm_ops)
 
-#else /* !CONFIG_PM_SLEEP */
+#else /* !COMFIG_PM_OPS */
 
 #define PCI_PM_OPS_PTR	NULL
 
-#endif /* !CONFIG_PM_SLEEP */
+#endif /* !COMFIG_PM_OPS */
 
 /**
  * __pci_register_driver - register a new pci driver
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index c5df94e86678..997668558e79 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -75,7 +75,8 @@ static ssize_t local_cpus_show(struct device *dev,
 	int len;
 
 #ifdef CONFIG_NUMA
-	mask = cpumask_of_node(dev_to_node(dev));
+	mask = (dev_to_node(dev) == -1) ? cpu_online_mask :
+					  cpumask_of_node(dev_to_node(dev));
 #else
 	mask = cpumask_of_pcibus(to_pci_dev(dev)->bus);
 #endif
@@ -93,7 +94,8 @@ static ssize_t local_cpulist_show(struct device *dev,
 	int len;
 
 #ifdef CONFIG_NUMA
-	mask = cpumask_of_node(dev_to_node(dev));
+	mask = (dev_to_node(dev) == -1) ? cpu_online_mask :
+					  cpumask_of_node(dev_to_node(dev));
 #else
 	mask = cpumask_of_pcibus(to_pci_dev(dev)->bus);
 #endif
@@ -640,6 +642,7 @@ void pci_create_legacy_files(struct pci_bus *b)
 	if (!b->legacy_io)
 		goto kzalloc_err;
 
+	sysfs_bin_attr_init(b->legacy_io);
 	b->legacy_io->attr.name = "legacy_io";
 	b->legacy_io->size = 0xffff;
 	b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
@@ -653,6 +656,7 @@ void pci_create_legacy_files(struct pci_bus *b)
 
 	/* Allocated above after the legacy_io struct */
 	b->legacy_mem = b->legacy_io + 1;
+	sysfs_bin_attr_init(b->legacy_mem);
 	b->legacy_mem->attr.name = "legacy_mem";
 	b->legacy_mem->size = 1024*1024;
 	b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
@@ -798,6 +802,7 @@ static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
 	if (res_attr) {
 		char *res_attr_name = (char *)(res_attr + 1);
 
+		sysfs_bin_attr_init(res_attr);
 		if (write_combine) {
 			pdev->res_attr_wc[num] = res_attr;
 			sprintf(res_attr_name, "resource%d_wc", num);
@@ -970,6 +975,7 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev)
 		if (!attr)
 			return -ENOMEM;
 
+		sysfs_bin_attr_init(attr);
 		attr->size = dev->vpd->len;
 		attr->attr.name = "vpd";
 		attr->attr.mode = S_IRUSR | S_IWUSR;
@@ -1036,6 +1042,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 			retval = -ENOMEM;
 			goto err_resource_files;
 		}
+		sysfs_bin_attr_init(attr);
 		attr->size = rom_size;
 		attr->attr.name = "rom";
 		attr->attr.mode = S_IRUSR;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 0bc27e059019..1531f3a49879 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -19,8 +19,8 @@
 #include <linux/pci-aspm.h>
 #include <linux/pm_wakeup.h>
 #include <linux/interrupt.h>
-#include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include <linux/device.h>
+#include <linux/pm_runtime.h>
 #include <asm/setup.h>
 #include "pci.h"
 
@@ -29,7 +29,23 @@ const char *pci_power_names[] = {
 };
 EXPORT_SYMBOL_GPL(pci_power_names);
 
-unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
+int isa_dma_bridge_buggy;
+EXPORT_SYMBOL(isa_dma_bridge_buggy);
+
+int pci_pci_problems;
+EXPORT_SYMBOL(pci_pci_problems);
+
+unsigned int pci_pm_d3_delay;
+
+static void pci_dev_d3_sleep(struct pci_dev *dev)
+{
+	unsigned int delay = dev->d3_delay;
+
+	if (delay < pci_pm_d3_delay)
+		delay = pci_pm_d3_delay;
+
+	msleep(delay);
+}
 
 #ifdef CONFIG_PCI_DOMAINS
 int pci_domains_supported = 1;
@@ -287,6 +303,49 @@ int pci_find_ext_capability(struct pci_dev *dev, int cap)
 }
 EXPORT_SYMBOL_GPL(pci_find_ext_capability);
 
+/**
+ * pci_bus_find_ext_capability - find an extended capability
+ * @bus:   the PCI bus to query
+ * @devfn: PCI device to query
+ * @cap:   capability code
+ *
+ * Like pci_find_ext_capability() but works for pci devices that do not have a
+ * pci_dev structure set up yet.
+ *
+ * Returns the address of the requested capability structure within the
+ * device's PCI configuration space or 0 in case the device does not
+ * support it.
+ */
+int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn,
+				int cap)
+{
+	u32 header;
+	int ttl;
+	int pos = PCI_CFG_SPACE_SIZE;
+
+	/* minimum 8 bytes per capability */
+	ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
+
+	if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
+		return 0;
+	if (header == 0xffffffff || header == 0)
+		return 0;
+
+	while (ttl-- > 0) {
+		if (PCI_EXT_CAP_ID(header) == cap)
+			return pos;
+
+		pos = PCI_EXT_CAP_NEXT(header);
+		if (pos < PCI_CFG_SPACE_SIZE)
+			break;
+
+		if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
+			break;
+	}
+
+	return 0;
+}
+
 static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap)
 {
 	int rc, ttl = PCI_FIND_CAP_TTL;
@@ -370,10 +429,9 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
 {
 	const struct pci_bus *bus = dev->bus;
 	int i;
-	struct resource *best = NULL;
+	struct resource *best = NULL, *r;
 
-	for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		struct resource *r = bus->resource[i];
+	pci_bus_for_each_resource(bus, r, i) {
 		if (!r)
 			continue;
 		if (res->start && !(res->start >= r->start && res->end <= r->end))
@@ -447,6 +505,12 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
 			pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
 }
 
+static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable)
+{
+	return pci_platform_pm ?
+			pci_platform_pm->run_wake(dev, enable) : -ENODEV;
+}
+
 /**
  * pci_raw_set_power_state - Use PCI PM registers to set the power state of
  *                           given PCI device
@@ -522,7 +586,7 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 	/* Mandatory power management transition delays */
 	/* see PCI PM 1.1 5.6.1 table 18 */
 	if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
-		msleep(pci_pm_d3_delay);
+		pci_dev_d3_sleep(dev);
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
 		udelay(PCI_PM_D2_DELAY);
 
@@ -1153,11 +1217,11 @@ pci_disable_device(struct pci_dev *dev)
 
 /**
  * pcibios_set_pcie_reset_state - set reset state for device dev
- * @dev: the PCI-E device reset
+ * @dev: the PCIe device reset
  * @state: Reset state to enter into
  *
  *
- * Sets the PCI-E reset state for the device. This is the default
+ * Sets the PCIe reset state for the device. This is the default
  * implementation. Architecture implementations can override this.
  */
 int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
@@ -1168,7 +1232,7 @@ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
 
 /**
  * pci_set_pcie_reset_state - set reset state for device dev
- * @dev: the PCI-E device reset
+ * @dev: the PCIe device reset
  * @state: Reset state to enter into
  *
  *
@@ -1180,6 +1244,66 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
 }
 
 /**
+ * pci_check_pme_status - Check if given device has generated PME.
+ * @dev: Device to check.
+ *
+ * Check the PME status of the device and if set, clear it and clear PME enable
+ * (if set).  Return 'true' if PME status and PME enable were both set or
+ * 'false' otherwise.
+ */
+bool pci_check_pme_status(struct pci_dev *dev)
+{
+	int pmcsr_pos;
+	u16 pmcsr;
+	bool ret = false;
+
+	if (!dev->pm_cap)
+		return false;
+
+	pmcsr_pos = dev->pm_cap + PCI_PM_CTRL;
+	pci_read_config_word(dev, pmcsr_pos, &pmcsr);
+	if (!(pmcsr & PCI_PM_CTRL_PME_STATUS))
+		return false;
+
+	/* Clear PME status. */
+	pmcsr |= PCI_PM_CTRL_PME_STATUS;
+	if (pmcsr & PCI_PM_CTRL_PME_ENABLE) {
+		/* Disable PME to avoid interrupt flood. */
+		pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
+		ret = true;
+	}
+
+	pci_write_config_word(dev, pmcsr_pos, pmcsr);
+
+	return ret;
+}
+
+/**
+ * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
+ * @dev: Device to handle.
+ * @ign: Ignored.
+ *
+ * Check if @dev has generated PME and queue a resume request for it in that
+ * case.
+ */
+static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
+{
+	if (pci_check_pme_status(dev))
+		pm_request_resume(&dev->dev);
+	return 0;
+}
+
+/**
+ * pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary.
+ * @bus: Top bus of the subtree to walk.
+ */
+void pci_pme_wakeup_bus(struct pci_bus *bus)
+{
+	if (bus)
+		pci_walk_bus(bus, pci_pme_wakeup, NULL);
+}
+
+/**
  * pci_pme_capable - check the capability of PCI device to generate PME#
  * @dev: PCI device to handle.
  * @state: PCI state from which device will issue PME#.
@@ -1220,9 +1344,10 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
 }
 
 /**
- * pci_enable_wake - enable PCI device as wakeup event source
+ * __pci_enable_wake - enable PCI device as wakeup event source
  * @dev: PCI device affected
  * @state: PCI state from which device will issue wakeup events
+ * @runtime: True if the events are to be generated at run time
  * @enable: True to enable event generation; false to disable
  *
  * This enables the device as a wakeup event source, or disables it.
@@ -1238,11 +1363,12 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
  * Error code depending on the platform is returned if both the platform and
  * the native mechanism fail to enable the generation of wake-up events
  */
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
+int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
+		      bool runtime, bool enable)
 {
 	int ret = 0;
 
-	if (enable && !device_may_wakeup(&dev->dev))
+	if (enable && !runtime && !device_may_wakeup(&dev->dev))
 		return -EINVAL;
 
 	/* Don't do the same thing twice in a row for one device. */
@@ -1262,19 +1388,24 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
 			pci_pme_active(dev, true);
 		else
 			ret = 1;
-		error = platform_pci_sleep_wake(dev, true);
+		error = runtime ? platform_pci_run_wake(dev, true) :
+					platform_pci_sleep_wake(dev, true);
 		if (ret)
 			ret = error;
 		if (!ret)
 			dev->wakeup_prepared = true;
 	} else {
-		platform_pci_sleep_wake(dev, false);
+		if (runtime)
+			platform_pci_run_wake(dev, false);
+		else
+			platform_pci_sleep_wake(dev, false);
 		pci_pme_active(dev, false);
 		dev->wakeup_prepared = false;
 	}
 
 	return ret;
 }
+EXPORT_SYMBOL(__pci_enable_wake);
 
 /**
  * pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold
@@ -1384,6 +1515,66 @@ int pci_back_from_sleep(struct pci_dev *dev)
 }
 
 /**
+ * pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend.
+ * @dev: PCI device being suspended.
+ *
+ * Prepare @dev to generate wake-up events at run time and put it into a low
+ * power state.
+ */
+int pci_finish_runtime_suspend(struct pci_dev *dev)
+{
+	pci_power_t target_state = pci_target_state(dev);
+	int error;
+
+	if (target_state == PCI_POWER_ERROR)
+		return -EIO;
+
+	__pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
+
+	error = pci_set_power_state(dev, target_state);
+
+	if (error)
+		__pci_enable_wake(dev, target_state, true, false);
+
+	return error;
+}
+
+/**
+ * pci_dev_run_wake - Check if device can generate run-time wake-up events.
+ * @dev: Device to check.
+ *
+ * Return true if the device itself is cabable of generating wake-up events
+ * (through the platform or using the native PCIe PME) or if the device supports
+ * PME and one of its upstream bridges can generate wake-up events.
+ */
+bool pci_dev_run_wake(struct pci_dev *dev)
+{
+	struct pci_bus *bus = dev->bus;
+
+	if (device_run_wake(&dev->dev))
+		return true;
+
+	if (!dev->pme_support)
+		return false;
+
+	while (bus->parent) {
+		struct pci_dev *bridge = bus->self;
+
+		if (device_run_wake(&bridge->dev))
+			return true;
+
+		bus = bus->parent;
+	}
+
+	/* We have reached the root bus. */
+	if (bus->bridge)
+		return device_run_wake(bus->bridge);
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(pci_dev_run_wake);
+
+/**
  * pci_pm_init - Initialize PM functions of given PCI device
  * @dev: PCI device to handle.
  */
@@ -1392,7 +1583,10 @@ void pci_pm_init(struct pci_dev *dev)
 	int pm;
 	u16 pmc;
 
+	pm_runtime_forbid(&dev->dev);
+	device_enable_async_suspend(&dev->dev);
 	dev->wakeup_prepared = false;
+
 	dev->pm_cap = 0;
 
 	/* find PCI PM capability in list */
@@ -1409,6 +1603,7 @@ void pci_pm_init(struct pci_dev *dev)
 	}
 
 	dev->pm_cap = pm;
+	dev->d3_delay = PCI_PM_D3_WAIT;
 
 	dev->d1_support = false;
 	dev->d2_support = false;
@@ -2103,35 +2298,6 @@ void pci_msi_off(struct pci_dev *dev)
 	}
 }
 
-#ifndef HAVE_ARCH_PCI_SET_DMA_MASK
-/*
- * These can be overridden by arch-specific implementations
- */
-int
-pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (!pci_dma_supported(dev, mask))
-		return -EIO;
-
-	dev->dma_mask = mask;
-	dev_dbg(&dev->dev, "using %dbit DMA mask\n", fls64(mask));
-
-	return 0;
-}
-    
-int
-pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (!pci_dma_supported(dev, mask))
-		return -EIO;
-
-	dev->dev.coherent_dma_mask = mask;
-	dev_dbg(&dev->dev, "using %dbit consistent DMA mask\n", fls64(mask));
-
-	return 0;
-}
-#endif
-
 #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
 {
@@ -2247,12 +2413,12 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
 	csr &= ~PCI_PM_CTRL_STATE_MASK;
 	csr |= PCI_D3hot;
 	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
-	msleep(pci_pm_d3_delay);
+	pci_dev_d3_sleep(dev);
 
 	csr &= ~PCI_PM_CTRL_STATE_MASK;
 	csr |= PCI_D0;
 	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
-	msleep(pci_pm_d3_delay);
+	pci_dev_d3_sleep(dev);
 
 	return 0;
 }
@@ -2293,9 +2459,13 @@ static int pci_dev_reset(struct pci_dev *dev, int probe)
 	if (!probe) {
 		pci_block_user_cfg_access(dev);
 		/* block PM suspend, driver probe, etc. */
-		down(&dev->dev.sem);
+		device_lock(&dev->dev);
 	}
 
+	rc = pci_dev_specific_reset(dev, probe);
+	if (rc != -ENOTTY)
+		goto done;
+
 	rc = pcie_flr(dev, probe);
 	if (rc != -ENOTTY)
 		goto done;
@@ -2311,7 +2481,7 @@ static int pci_dev_reset(struct pci_dev *dev, int probe)
 	rc = pci_parent_bus_reset(dev, probe);
 done:
 	if (!probe) {
-		up(&dev->dev.sem);
+		device_unlock(&dev->dev);
 		pci_unblock_user_cfg_access(dev);
 	}
 
@@ -2406,18 +2576,17 @@ EXPORT_SYMBOL_GPL(pci_reset_function);
  */
 int pcix_get_max_mmrbc(struct pci_dev *dev)
 {
-	int err, cap;
+	int cap;
 	u32 stat;
 
 	cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
 	if (!cap)
 		return -EINVAL;
 
-	err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
-	if (err)
+	if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
 		return -EINVAL;
 
-	return (stat & PCI_X_STATUS_MAX_READ) >> 12;
+	return 512 << ((stat & PCI_X_STATUS_MAX_READ) >> 21);
 }
 EXPORT_SYMBOL(pcix_get_max_mmrbc);
 
@@ -2430,18 +2599,17 @@ EXPORT_SYMBOL(pcix_get_max_mmrbc);
  */
 int pcix_get_mmrbc(struct pci_dev *dev)
 {
-	int ret, cap;
-	u32 cmd;
+	int cap;
+	u16 cmd;
 
 	cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
 	if (!cap)
 		return -EINVAL;
 
-	ret = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
-	if (!ret)
-		ret = 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
+	if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
+		return -EINVAL;
 
-	return ret;
+	return 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
 }
 EXPORT_SYMBOL(pcix_get_mmrbc);
 
@@ -2456,28 +2624,27 @@ EXPORT_SYMBOL(pcix_get_mmrbc);
  */
 int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
 {
-	int cap, err = -EINVAL;
-	u32 stat, cmd, v, o;
+	int cap;
+	u32 stat, v, o;
+	u16 cmd;
 
 	if (mmrbc < 512 || mmrbc > 4096 || !is_power_of_2(mmrbc))
-		goto out;
+		return -EINVAL;
 
 	v = ffs(mmrbc) - 10;
 
 	cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
 	if (!cap)
-		goto out;
+		return -EINVAL;
 
-	err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
-	if (err)
-		goto out;
+	if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
+		return -EINVAL;
 
 	if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21)
 		return -E2BIG;
 
-	err = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
-	if (err)
-		goto out;
+	if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
+		return -EINVAL;
 
 	o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
 	if (o != v) {
@@ -2487,10 +2654,10 @@ int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
 
 		cmd &= ~PCI_X_CMD_MAX_READ;
 		cmd |= v << 2;
-		err = pci_write_config_dword(dev, cap + PCI_X_CMD, cmd);
+		if (pci_write_config_word(dev, cap + PCI_X_CMD, cmd))
+			return -EIO;
 	}
-out:
-	return err;
+	return 0;
 }
 EXPORT_SYMBOL(pcix_set_mmrbc);
 
@@ -2600,6 +2767,23 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
 	return 0;
 }
 
+/* Some architectures require additional programming to enable VGA */
+static arch_set_vga_state_t arch_set_vga_state;
+
+void __init pci_register_set_vga_state(arch_set_vga_state_t func)
+{
+	arch_set_vga_state = func;	/* NULL disables */
+}
+
+static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
+		      unsigned int command_bits, bool change_bridge)
+{
+	if (arch_set_vga_state)
+		return arch_set_vga_state(dev, decode, command_bits,
+						change_bridge);
+	return 0;
+}
+
 /**
  * pci_set_vga_state - set VGA decode state on device and parents if requested
  * @dev: the PCI device
@@ -2613,9 +2797,15 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode,
 	struct pci_bus *bus;
 	struct pci_dev *bridge;
 	u16 cmd;
+	int rc;
 
 	WARN_ON(command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY));
 
+	/* ARCH specific VGA enables */
+	rc = pci_set_vga_state_arch(dev, decode, command_bits, change_bridge);
+	if (rc)
+		return rc;
+
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	if (decode == true)
 		cmd |= command_bits;
@@ -2779,6 +2969,11 @@ int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev)
 	return 1;
 }
 
+void __weak pci_fixup_cardbus(struct pci_bus *bus)
+{
+}
+EXPORT_SYMBOL(pci_fixup_cardbus);
+
 static int __init pci_setup(char *str)
 {
 	while (str) {
@@ -2840,8 +3035,6 @@ EXPORT_SYMBOL(pci_set_mwi);
 EXPORT_SYMBOL(pci_try_set_mwi);
 EXPORT_SYMBOL(pci_clear_mwi);
 EXPORT_SYMBOL_GPL(pci_intx);
-EXPORT_SYMBOL(pci_set_dma_mask);
-EXPORT_SYMBOL(pci_set_consistent_dma_mask);
 EXPORT_SYMBOL(pci_assign_resource);
 EXPORT_SYMBOL(pci_find_parent_resource);
 EXPORT_SYMBOL(pci_select_bars);
@@ -2851,10 +3044,8 @@ EXPORT_SYMBOL(pci_save_state);
 EXPORT_SYMBOL(pci_restore_state);
 EXPORT_SYMBOL(pci_pme_capable);
 EXPORT_SYMBOL(pci_pme_active);
-EXPORT_SYMBOL(pci_enable_wake);
 EXPORT_SYMBOL(pci_wake_from_d3);
 EXPORT_SYMBOL(pci_target_state);
 EXPORT_SYMBOL(pci_prepare_to_sleep);
 EXPORT_SYMBOL(pci_back_from_sleep);
 EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);
-
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 33ed8e0aba1e..4eb10f48d270 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -35,6 +35,10 @@ int pci_probe_reset_function(struct pci_dev *dev);
  *
  * @sleep_wake: enables/disables the system wake up capability of given device
  *
+ * @run_wake: enables/disables the platform to generate run-time wake-up events
+ *		for given device (the device's wake-up capability has to be
+ *		enabled by @sleep_wake for this feature to work)
+ *
  * If given platform is generally capable of power managing PCI devices, all of
  * these callbacks are mandatory.
  */
@@ -44,11 +48,16 @@ struct pci_platform_pm_ops {
 	pci_power_t (*choose_state)(struct pci_dev *dev);
 	bool (*can_wakeup)(struct pci_dev *dev);
 	int (*sleep_wake)(struct pci_dev *dev, bool enable);
+	int (*run_wake)(struct pci_dev *dev, bool enable);
 };
 
 extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops);
 extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
 extern void pci_disable_enabled_device(struct pci_dev *dev);
+extern bool pci_check_pme_status(struct pci_dev *dev);
+extern int pci_finish_runtime_suspend(struct pci_dev *dev);
+extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
+extern void pci_pme_wakeup_bus(struct pci_bus *bus);
 extern void pci_pm_init(struct pci_dev *dev);
 extern void platform_pci_wakeup_init(struct pci_dev *dev);
 extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
@@ -313,4 +322,19 @@ static inline int pci_resource_alignment(struct pci_dev *dev,
 
 extern void pci_enable_acs(struct pci_dev *dev);
 
+struct pci_dev_reset_methods {
+	u16 vendor;
+	u16 device;
+	int (*reset)(struct pci_dev *dev, int probe);
+};
+
+#ifdef CONFIG_PCI_QUIRKS
+extern int pci_dev_specific_reset(struct pci_dev *dev, int probe);
+#else
+static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe)
+{
+	return -ENOTTY;
+}
+#endif
+
 #endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 5a0c6ad53f8e..b8b494b3e0d0 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -46,3 +46,7 @@ config PCIEASPM_DEBUG
 	help
 	  This enables PCI Express ASPM debug support. It will add per-device
 	  interface to control ASPM.
+
+config PCIE_PME
+	def_bool y
+	depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 11f6bb1eae24..ea654545e7c4 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -11,3 +11,5 @@ obj-$(CONFIG_PCIEPORTBUS)	+= pcieportdrv.o
 
 # Build PCI Express AER if needed
 obj-$(CONFIG_PCIEAER)		+= aer/
+
+obj-$(CONFIG_PCIE_PME) += pme/
diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug
index b8c925c1f6aa..9142949734f5 100644
--- a/drivers/pci/pcie/aer/Kconfig.debug
+++ b/drivers/pci/pcie/aer/Kconfig.debug
@@ -3,14 +3,14 @@
 #
 
 config PCIEAER_INJECT
-	tristate "PCIE AER error injector support"
+	tristate "PCIe AER error injector support"
 	depends on PCIEAER
 	default n
 	help
 	  This enables PCI Express Root Port Advanced Error Reporting
 	  (AER) software error injector.
 
-	  Debuging PCIE AER code is quite difficult because it is hard
+	  Debugging PCIe AER code is quite difficult because it is hard
 	  to trigger various real hardware errors. Software based
 	  error injection can fake almost all kinds of errors with the
 	  help of a user space helper tool aer-inject, which can be
diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
index 7fcd5331b14c..223052b73563 100644
--- a/drivers/pci/pcie/aer/aer_inject.c
+++ b/drivers/pci/pcie/aer/aer_inject.c
@@ -1,7 +1,7 @@
 /*
- * PCIE AER software error injection support.
+ * PCIe AER software error injection support.
  *
- * Debuging PCIE AER code is quite difficult because it is hard to
+ * Debuging PCIe AER code is quite difficult because it is hard to
  * trigger various real hardware errors. Software based error
  * injection can fake almost all kinds of errors with the help of a
  * user space helper tool aer-inject, which can be gotten from:
@@ -321,7 +321,7 @@ static int aer_inject(struct aer_error_inj *einj)
 	unsigned long flags;
 	unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
 	int pos_cap_err, rp_pos_cap_err;
-	u32 sever;
+	u32 sever, cor_mask, uncor_mask;
 	int ret = 0;
 
 	dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn);
@@ -339,6 +339,9 @@ static int aer_inject(struct aer_error_inj *einj)
 		goto out_put;
 	}
 	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever);
+	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &cor_mask);
+	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
+			      &uncor_mask);
 
 	rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR);
 	if (!rp_pos_cap_err) {
@@ -374,6 +377,21 @@ static int aer_inject(struct aer_error_inj *einj)
 	err->header_log2 = einj->header_log2;
 	err->header_log3 = einj->header_log3;
 
+	if (einj->cor_status && !(einj->cor_status & ~cor_mask)) {
+		ret = -EINVAL;
+		printk(KERN_WARNING "The correctable error(s) is masked "
+				"by device\n");
+		spin_unlock_irqrestore(&inject_lock, flags);
+		goto out_put;
+	}
+	if (einj->uncor_status && !(einj->uncor_status & ~uncor_mask)) {
+		ret = -EINVAL;
+		printk(KERN_WARNING "The uncorrectable error(s) is masked "
+				"by device\n");
+		spin_unlock_irqrestore(&inject_lock, flags);
+		goto out_put;
+	}
+
 	rperr = __find_aer_error_by_dev(rpdev);
 	if (!rperr) {
 		rperr = rperr_alloc;
@@ -413,8 +431,14 @@ static int aer_inject(struct aer_error_inj *einj)
 	if (ret)
 		goto out_put;
 
-	if (find_aer_device(rpdev, &edev))
+	if (find_aer_device(rpdev, &edev)) {
+		if (!get_service_data(edev)) {
+			printk(KERN_WARNING "AER service is not initialized\n");
+			ret = -EINVAL;
+			goto out_put;
+		}
 		aer_irq(-1, edev);
+	}
 	else
 		ret = -EINVAL;
 out_put:
@@ -484,5 +508,5 @@ static void __exit aer_inject_exit(void)
 module_init(aer_inject_init);
 module_exit(aer_inject_exit);
 
-MODULE_DESCRIPTION("PCIE AER software error injector");
+MODULE_DESCRIPTION("PCIe AER software error injector");
 MODULE_LICENSE("GPL");
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index 97a345927b55..21f215f4daa3 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -155,7 +155,7 @@ static struct aer_rpc *aer_alloc_rpc(struct pcie_device *dev)
 	mutex_init(&rpc->rpc_mutex);
 	init_waitqueue_head(&rpc->wait_release);
 
-	/* Use PCIE bus function to store rpc into PCIE device */
+	/* Use PCIe bus function to store rpc into PCIe device */
 	set_service_data(dev, rpc);
 
 	return rpc;
diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c
index 8edb2f300e8f..04814087658d 100644
--- a/drivers/pci/pcie/aer/aerdrv_acpi.c
+++ b/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -24,7 +24,7 @@
  *
  * @return: Zero on success. Nonzero otherwise.
  *
- * Invoked when PCIE bus loads AER service driver. To avoid conflict with
+ * Invoked when PCIe bus loads AER service driver. To avoid conflict with
  * BIOS AER support requires BIOS to yield AER control to OS native driver.
  **/
 int aer_osc_setup(struct pcie_device *pciedev)
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index ae672ca80333..c843a799814d 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -587,7 +587,7 @@ static void handle_error_source(struct pcie_device *aerdev,
  * aer_enable_rootport - enable Root Port's interrupts when receiving messages
  * @rpc: pointer to a Root Port data structure
  *
- * Invoked when PCIE bus loads AER service driver.
+ * Invoked when PCIe bus loads AER service driver.
  */
 void aer_enable_rootport(struct aer_rpc *rpc)
 {
@@ -597,7 +597,7 @@ void aer_enable_rootport(struct aer_rpc *rpc)
 	u32 reg32;
 
 	pos = pci_pcie_cap(pdev);
-	/* Clear PCIE Capability's Device Status */
+	/* Clear PCIe Capability's Device Status */
 	pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, &reg16);
 	pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16);
 
@@ -631,7 +631,7 @@ void aer_enable_rootport(struct aer_rpc *rpc)
  * disable_root_aer - disable Root Port's interrupts when receiving messages
  * @rpc: pointer to a Root Port data structure
  *
- * Invoked when PCIE bus unloads AER service driver.
+ * Invoked when PCIe bus unloads AER service driver.
  */
 static void disable_root_aer(struct aer_rpc *rpc)
 {
diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c
index 44acde72294f..9d3e4c8d0184 100644
--- a/drivers/pci/pcie/aer/aerdrv_errprint.c
+++ b/drivers/pci/pcie/aer/aerdrv_errprint.c
@@ -184,7 +184,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
 
 	if (info->status == 0) {
 		AER_PR(info, dev,
-			"PCIE Bus Error: severity=%s, type=Unaccessible, "
+			"PCIe Bus Error: severity=%s, type=Unaccessible, "
 			"id=%04x(Unregistered Agent ID)\n",
 			aer_error_severity_string[info->severity], id);
 	} else {
@@ -194,7 +194,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
 		agent = AER_GET_AGENT(info->severity, info->status);
 
 		AER_PR(info, dev,
-			"PCIE Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
+			"PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
 			aer_error_severity_string[info->severity],
 			aer_error_layer[layer], id, aer_agent_string[agent]);
 
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 5a01fc7fbf05..be53d98fa384 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1,6 +1,6 @@
 /*
  * File:	drivers/pci/pcie/aspm.c
- * Enabling PCIE link L0s/L1 state and Clock Power Management
+ * Enabling PCIe link L0s/L1 state and Clock Power Management
  *
  * Copyright (C) 2007 Intel
  * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
@@ -499,7 +499,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
 	int pos;
 	u32 reg32;
 	/*
-	 * Some functions in a slot might not all be PCIE functions,
+	 * Some functions in a slot might not all be PCIe functions,
 	 * very strange. Disable ASPM for the whole slot
 	 */
 	list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
diff --git a/drivers/pci/pcie/pme/Makefile b/drivers/pci/pcie/pme/Makefile
new file mode 100644
index 000000000000..8b9238053080
--- /dev/null
+++ b/drivers/pci/pcie/pme/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for PCI-Express Root Port PME signaling driver
+#
+
+obj-$(CONFIG_PCIE_PME) += pmedriver.o
+
+pmedriver-objs := pcie_pme.o
+pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o
diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c
new file mode 100644
index 000000000000..7b3cbff547ee
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme.c
@@ -0,0 +1,505 @@
+/*
+ * PCIe Native PME support
+ *
+ * Copyright (C) 2007 - 2009 Intel Corp
+ * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com>
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License V2.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/pcieport_if.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/pm_runtime.h>
+
+#include "../../pci.h"
+#include "pcie_pme.h"
+
+#define PCI_EXP_RTSTA_PME	0x10000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING	0x20000 /* PME pending */
+
+/*
+ * If set, this switch will prevent the PCIe root port PME service driver from
+ * being registered.  Consequently, the interrupt-based PCIe PME signaling will
+ * not be used by any PCIe root ports in that case.
+ */
+static bool pcie_pme_disabled;
+
+/*
+ * The PCI Express Base Specification 2.0, Section 6.1.8, states the following:
+ * "In order to maintain compatibility with non-PCI Express-aware system
+ * software, system power management logic must be configured by firmware to use
+ * the legacy mechanism of signaling PME by default.  PCI Express-aware system
+ * software must notify the firmware prior to enabling native, interrupt-based
+ * PME signaling."  However, if the platform doesn't provide us with a suitable
+ * notification mechanism or the notification fails, it is not clear whether or
+ * not we are supposed to use the interrupt-based PCIe PME signaling.  The
+ * switch below can be used to indicate the desired behaviour.  When set, it
+ * will make the kernel use the interrupt-based PCIe PME signaling regardless of
+ * the platform notification status, although the kernel will attempt to notify
+ * the platform anyway.  When unset, it will prevent the kernel from using the
+ * the interrupt-based PCIe PME signaling if the platform notification fails,
+ * which is the default.
+ */
+static bool pcie_pme_force_enable;
+
+/*
+ * If this switch is set, MSI will not be used for PCIe PME signaling.  This
+ * causes the PCIe port driver to use INTx interrupts only, but it turns out
+ * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based
+ * wake-up from system sleep states.
+ */
+bool pcie_pme_msi_disabled;
+
+static int __init pcie_pme_setup(char *str)
+{
+	if (!strcmp(str, "off"))
+		pcie_pme_disabled = true;
+	else if (!strcmp(str, "force"))
+		pcie_pme_force_enable = true;
+	else if (!strcmp(str, "nomsi"))
+		pcie_pme_msi_disabled = true;
+	return 1;
+}
+__setup("pcie_pme=", pcie_pme_setup);
+
+/**
+ * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME.
+ * @srv: PCIe PME root port service to use for carrying out the check.
+ *
+ * Notify the platform that the native PCIe PME is going to be used and return
+ * 'true' if the control of the PCIe PME registers has been acquired from the
+ * platform.
+ */
+static bool pcie_pme_platform_setup(struct pcie_device *srv)
+{
+	if (!pcie_pme_platform_notify(srv))
+		return true;
+	return pcie_pme_force_enable;
+}
+
+struct pcie_pme_service_data {
+	spinlock_t lock;
+	struct pcie_device *srv;
+	struct work_struct work;
+	bool noirq; /* Don't enable the PME interrupt used by this service. */
+};
+
+/**
+ * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation.
+ * @dev: PCIe root port or event collector.
+ * @enable: Enable or disable the interrupt.
+ */
+static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
+{
+	int rtctl_pos;
+	u16 rtctl;
+
+	rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL;
+
+	pci_read_config_word(dev, rtctl_pos, &rtctl);
+	if (enable)
+		rtctl |= PCI_EXP_RTCTL_PMEIE;
+	else
+		rtctl &= ~PCI_EXP_RTCTL_PMEIE;
+	pci_write_config_word(dev, rtctl_pos, rtctl);
+}
+
+/**
+ * pcie_pme_clear_status - Clear root port PME interrupt status.
+ * @dev: PCIe root port or event collector.
+ */
+static void pcie_pme_clear_status(struct pci_dev *dev)
+{
+	int rtsta_pos;
+	u32 rtsta;
+
+	rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA;
+
+	pci_read_config_dword(dev, rtsta_pos, &rtsta);
+	rtsta |= PCI_EXP_RTSTA_PME;
+	pci_write_config_dword(dev, rtsta_pos, rtsta);
+}
+
+/**
+ * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#.
+ * @bus: PCI bus to scan.
+ *
+ * Scan given PCI bus and all buses under it for devices asserting PME#.
+ */
+static bool pcie_pme_walk_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	bool ret = false;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		/* Skip PCIe devices in case we started from a root port. */
+		if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
+			pm_request_resume(&dev->dev);
+			ret = true;
+		}
+
+		if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate))
+			ret = true;
+	}
+
+	return ret;
+}
+
+/**
+ * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME.
+ * @bus: Secondary bus of the bridge.
+ * @devfn: Device/function number to check.
+ *
+ * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band
+ * PCIe PME message.  In such that case the bridge should use the Requester ID
+ * of device/function number 0 on its secondary bus.
+ */
+static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn)
+{
+	struct pci_dev *dev;
+	bool found = false;
+
+	if (devfn)
+		return false;
+
+	dev = pci_dev_get(bus->self);
+	if (!dev)
+		return false;
+
+	if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
+		down_read(&pci_bus_sem);
+		if (pcie_pme_walk_bus(bus))
+			found = true;
+		up_read(&pci_bus_sem);
+	}
+
+	pci_dev_put(dev);
+	return found;
+}
+
+/**
+ * pcie_pme_handle_request - Find device that generated PME and handle it.
+ * @port: Root port or event collector that generated the PME interrupt.
+ * @req_id: PCIe Requester ID of the device that generated the PME.
+ */
+static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
+{
+	u8 busnr = req_id >> 8, devfn = req_id & 0xff;
+	struct pci_bus *bus;
+	struct pci_dev *dev;
+	bool found = false;
+
+	/* First, check if the PME is from the root port itself. */
+	if (port->devfn == devfn && port->bus->number == busnr) {
+		if (pci_check_pme_status(port)) {
+			pm_request_resume(&port->dev);
+			found = true;
+		} else {
+			/*
+			 * Apparently, the root port generated the PME on behalf
+			 * of a non-PCIe device downstream.  If this is done by
+			 * a root port, the Requester ID field in its status
+			 * register may contain either the root port's, or the
+			 * source device's information (PCI Express Base
+			 * Specification, Rev. 2.0, Section 6.1.9).
+			 */
+			down_read(&pci_bus_sem);
+			found = pcie_pme_walk_bus(port->subordinate);
+			up_read(&pci_bus_sem);
+		}
+		goto out;
+	}
+
+	/* Second, find the bus the source device is on. */
+	bus = pci_find_bus(pci_domain_nr(port->bus), busnr);
+	if (!bus)
+		goto out;
+
+	/* Next, check if the PME is from a PCIe-PCI bridge. */
+	found = pcie_pme_from_pci_bridge(bus, devfn);
+	if (found)
+		goto out;
+
+	/* Finally, try to find the PME source on the bus. */
+	down_read(&pci_bus_sem);
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_dev_get(dev);
+		if (dev->devfn == devfn) {
+			found = true;
+			break;
+		}
+		pci_dev_put(dev);
+	}
+	up_read(&pci_bus_sem);
+
+	if (found) {
+		/* The device is there, but we have to check its PME status. */
+		found = pci_check_pme_status(dev);
+		if (found)
+			pm_request_resume(&dev->dev);
+		pci_dev_put(dev);
+	} else if (devfn) {
+		/*
+		 * The device is not there, but we can still try to recover by
+		 * assuming that the PME was reported by a PCIe-PCI bridge that
+		 * used devfn different from zero.
+		 */
+		dev_dbg(&port->dev, "PME interrupt generated for "
+			"non-existent device %02x:%02x.%d\n",
+			busnr, PCI_SLOT(devfn), PCI_FUNC(devfn));
+		found = pcie_pme_from_pci_bridge(bus, 0);
+	}
+
+ out:
+	if (!found)
+		dev_dbg(&port->dev, "Spurious native PME interrupt!\n");
+}
+
+/**
+ * pcie_pme_work_fn - Work handler for PCIe PME interrupt.
+ * @work: Work structure giving access to service data.
+ */
+static void pcie_pme_work_fn(struct work_struct *work)
+{
+	struct pcie_pme_service_data *data =
+			container_of(work, struct pcie_pme_service_data, work);
+	struct pci_dev *port = data->srv->port;
+	int rtsta_pos;
+	u32 rtsta;
+
+	rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
+
+	spin_lock_irq(&data->lock);
+
+	for (;;) {
+		if (data->noirq)
+			break;
+
+		pci_read_config_dword(port, rtsta_pos, &rtsta);
+		if (rtsta & PCI_EXP_RTSTA_PME) {
+			/*
+			 * Clear PME status of the port.  If there are other
+			 * pending PMEs, the status will be set again.
+			 */
+			pcie_pme_clear_status(port);
+
+			spin_unlock_irq(&data->lock);
+			pcie_pme_handle_request(port, rtsta & 0xffff);
+			spin_lock_irq(&data->lock);
+
+			continue;
+		}
+
+		/* No need to loop if there are no more PMEs pending. */
+		if (!(rtsta & PCI_EXP_RTSTA_PENDING))
+			break;
+
+		spin_unlock_irq(&data->lock);
+		cpu_relax();
+		spin_lock_irq(&data->lock);
+	}
+
+	if (!data->noirq)
+		pcie_pme_interrupt_enable(port, true);
+
+	spin_unlock_irq(&data->lock);
+}
+
+/**
+ * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt.
+ * @irq: Interrupt vector.
+ * @context: Interrupt context pointer.
+ */
+static irqreturn_t pcie_pme_irq(int irq, void *context)
+{
+	struct pci_dev *port;
+	struct pcie_pme_service_data *data;
+	int rtsta_pos;
+	u32 rtsta;
+	unsigned long flags;
+
+	port = ((struct pcie_device *)context)->port;
+	data = get_service_data((struct pcie_device *)context);
+
+	rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
+
+	spin_lock_irqsave(&data->lock, flags);
+	pci_read_config_dword(port, rtsta_pos, &rtsta);
+
+	if (!(rtsta & PCI_EXP_RTSTA_PME)) {
+		spin_unlock_irqrestore(&data->lock, flags);
+		return IRQ_NONE;
+	}
+
+	pcie_pme_interrupt_enable(port, false);
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	/* We don't use pm_wq, because it's freezable. */
+	schedule_work(&data->work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * pcie_pme_set_native - Set the PME interrupt flag for given device.
+ * @dev: PCI device to handle.
+ * @ign: Ignored.
+ */
+static int pcie_pme_set_native(struct pci_dev *dev, void *ign)
+{
+	dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n");
+
+	device_set_run_wake(&dev->dev, true);
+	dev->pme_interrupt = true;
+	return 0;
+}
+
+/**
+ * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port.
+ * @port: PCIe root port or event collector to handle.
+ *
+ * For each device below given root port, including the port itself (or for each
+ * root complex integrated endpoint if @port is a root complex event collector)
+ * set the flag indicating that it can signal run-time wake-up events via PCIe
+ * PME interrupts.
+ */
+static void pcie_pme_mark_devices(struct pci_dev *port)
+{
+	pcie_pme_set_native(port, NULL);
+	if (port->subordinate) {
+		pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL);
+	} else {
+		struct pci_bus *bus = port->bus;
+		struct pci_dev *dev;
+
+		/* Check if this is a root port event collector. */
+		if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus)
+			return;
+
+		down_read(&pci_bus_sem);
+		list_for_each_entry(dev, &bus->devices, bus_list)
+			if (pci_is_pcie(dev)
+			    && dev->pcie_type == PCI_EXP_TYPE_RC_END)
+				pcie_pme_set_native(dev, NULL);
+		up_read(&pci_bus_sem);
+	}
+}
+
+/**
+ * pcie_pme_probe - Initialize PCIe PME service for given root port.
+ * @srv: PCIe service to initialize.
+ */
+static int pcie_pme_probe(struct pcie_device *srv)
+{
+	struct pci_dev *port;
+	struct pcie_pme_service_data *data;
+	int ret;
+
+	if (!pcie_pme_platform_setup(srv))
+		return -EACCES;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->lock);
+	INIT_WORK(&data->work, pcie_pme_work_fn);
+	data->srv = srv;
+	set_service_data(srv, data);
+
+	port = srv->port;
+	pcie_pme_interrupt_enable(port, false);
+	pcie_pme_clear_status(port);
+
+	ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv);
+	if (ret) {
+		kfree(data);
+	} else {
+		pcie_pme_mark_devices(port);
+		pcie_pme_interrupt_enable(port, true);
+	}
+
+	return ret;
+}
+
+/**
+ * pcie_pme_suspend - Suspend PCIe PME service device.
+ * @srv: PCIe service device to suspend.
+ */
+static int pcie_pme_suspend(struct pcie_device *srv)
+{
+	struct pcie_pme_service_data *data = get_service_data(srv);
+	struct pci_dev *port = srv->port;
+
+	spin_lock_irq(&data->lock);
+	pcie_pme_interrupt_enable(port, false);
+	pcie_pme_clear_status(port);
+	data->noirq = true;
+	spin_unlock_irq(&data->lock);
+
+	synchronize_irq(srv->irq);
+
+	return 0;
+}
+
+/**
+ * pcie_pme_resume - Resume PCIe PME service device.
+ * @srv - PCIe service device to resume.
+ */
+static int pcie_pme_resume(struct pcie_device *srv)
+{
+	struct pcie_pme_service_data *data = get_service_data(srv);
+	struct pci_dev *port = srv->port;
+
+	spin_lock_irq(&data->lock);
+	data->noirq = false;
+	pcie_pme_clear_status(port);
+	pcie_pme_interrupt_enable(port, true);
+	spin_unlock_irq(&data->lock);
+
+	return 0;
+}
+
+/**
+ * pcie_pme_remove - Prepare PCIe PME service device for removal.
+ * @srv - PCIe service device to resume.
+ */
+static void pcie_pme_remove(struct pcie_device *srv)
+{
+	pcie_pme_suspend(srv);
+	free_irq(srv->irq, srv);
+	kfree(get_service_data(srv));
+}
+
+static struct pcie_port_service_driver pcie_pme_driver = {
+	.name		= "pcie_pme",
+	.port_type 	= PCI_EXP_TYPE_ROOT_PORT,
+	.service 	= PCIE_PORT_SERVICE_PME,
+
+	.probe		= pcie_pme_probe,
+	.suspend	= pcie_pme_suspend,
+	.resume		= pcie_pme_resume,
+	.remove		= pcie_pme_remove,
+};
+
+/**
+ * pcie_pme_service_init - Register the PCIe PME service driver.
+ */
+static int __init pcie_pme_service_init(void)
+{
+	return pcie_pme_disabled ?
+		-ENODEV : pcie_port_service_register(&pcie_pme_driver);
+}
+
+module_init(pcie_pme_service_init);
diff --git a/drivers/pci/pcie/pme/pcie_pme.h b/drivers/pci/pcie/pme/pcie_pme.h
new file mode 100644
index 000000000000..b30d2b7c9775
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme.h
@@ -0,0 +1,28 @@
+/*
+ * drivers/pci/pcie/pme/pcie_pme.h
+ *
+ * PCI Express Root Port PME signaling support
+ *
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ */
+
+#ifndef _PCIE_PME_H_
+#define _PCIE_PME_H_
+
+struct pcie_device;
+
+#ifdef CONFIG_ACPI
+extern int pcie_pme_acpi_setup(struct pcie_device *srv);
+
+static inline int pcie_pme_platform_notify(struct pcie_device *srv)
+{
+	return pcie_pme_acpi_setup(srv);
+}
+#else /* !CONFIG_ACPI */
+static inline int pcie_pme_platform_notify(struct pcie_device *srv)
+{
+	return 0;
+}
+#endif /* !CONFIG_ACPI */
+
+#endif
diff --git a/drivers/pci/pcie/pme/pcie_pme_acpi.c b/drivers/pci/pcie/pme/pcie_pme_acpi.c
new file mode 100644
index 000000000000..83ab2287ae3f
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme_acpi.c
@@ -0,0 +1,54 @@
+/*
+ * PCIe Native PME support, ACPI-related part
+ *
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License V2.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/pcieport_if.h>
+
+/**
+ * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME.
+ * @srv - PCIe PME service for a root port or event collector.
+ *
+ * Invoked when the PCIe bus type loads PCIe PME service driver.  To avoid
+ * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME
+ * control to the kernel.
+ */
+int pcie_pme_acpi_setup(struct pcie_device *srv)
+{
+	acpi_status status = AE_NOT_FOUND;
+	struct pci_dev *port = srv->port;
+	acpi_handle handle;
+	int error = 0;
+
+	if (acpi_pci_disabled)
+		return -ENOSYS;
+
+	dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n");
+
+	handle = acpi_find_root_bridge_handle(port);
+	if (!handle)
+		return -EINVAL;
+
+	status = acpi_pci_osc_control_set(handle,
+			OSC_PCI_EXPRESS_PME_CONTROL |
+			OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+	if (ACPI_FAILURE(status)) {
+		dev_info(&port->dev,
+			"Failed to receive control of PCIe PME service: %s\n",
+			(status == AE_SUPPORT || status == AE_NOT_FOUND) ?
+			"no _OSC support" : "ACPI _OSC failed");
+		error = -ENODEV;
+	}
+
+	return error;
+}
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index aaeb9d21cba5..813a5c3427b6 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -30,4 +30,21 @@ extern void pcie_port_device_remove(struct pci_dev *dev);
 extern int __must_check pcie_port_bus_register(void);
 extern void pcie_port_bus_unregister(void);
 
+#ifdef CONFIG_PCIE_PME
+extern bool pcie_pme_msi_disabled;
+
+static inline void pcie_pme_disable_msi(void)
+{
+	pcie_pme_msi_disabled = true;
+}
+
+static inline bool pcie_pme_no_msi(void)
+{
+	return pcie_pme_msi_disabled;
+}
+#else /* !CONFIG_PCIE_PME */
+static inline void pcie_pme_disable_msi(void) {}
+static inline bool pcie_pme_no_msi(void) { return false; }
+#endif /* !CONFIG_PCIE_PME */
+
 #endif /* _PORTDRV_H_ */
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 413262eb95b7..e73effbe402c 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -27,7 +27,7 @@
  */
 static void release_pcie_device(struct device *dev)
 {
-	kfree(to_pcie_device(dev));			
+	kfree(to_pcie_device(dev));
 }
 
 /**
@@ -186,16 +186,24 @@ static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask)
  */
 static int init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
 {
-	int i, irq;
+	int i, irq = -1;
+
+	/* We have to use INTx if MSI cannot be used for PCIe PME. */
+	if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) {
+		if (dev->pin)
+			irq = dev->irq;
+		goto no_msi;
+	}
 
 	/* Try to use MSI-X if supported */
 	if (!pcie_port_enable_msix(dev, irqs, mask))
 		return 0;
+
 	/* We're not going to use MSI-X, so try MSI and fall back to INTx */
-	irq = -1;
 	if (!pci_enable_msi(dev) || dev->pin)
 		irq = dev->irq;
 
+ no_msi:
 	for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
 		irqs[i] = irq;
 	irqs[PCIE_PORT_SERVICE_VC_SHIFT] = -1;
@@ -277,6 +285,7 @@ static int pcie_device_init(struct pci_dev *pdev, int service, int irq)
 		     pci_name(pdev),
 		     get_descriptor_id(pdev->pcie_type, service));
 	device->parent = &pdev->dev;
+	device_enable_async_suspend(device);
 
 	retval = device_register(device);
 	if (retval)
@@ -346,12 +355,11 @@ static int suspend_iter(struct device *dev, void *data)
 {
 	struct pcie_port_service_driver *service_driver;
 
- 	if ((dev->bus == &pcie_port_bus_type) &&
- 	    (dev->driver)) {
- 		service_driver = to_service_driver(dev->driver);
- 		if (service_driver->suspend)
- 			service_driver->suspend(to_pcie_device(dev));
-  	}
+	if ((dev->bus == &pcie_port_bus_type) && dev->driver) {
+		service_driver = to_service_driver(dev->driver);
+		if (service_driver->suspend)
+			service_driver->suspend(to_pcie_device(dev));
+	}
 	return 0;
 }
 
@@ -494,6 +502,7 @@ int pcie_port_service_register(struct pcie_port_service_driver *new)
 
 	return driver_register(&new->driver);
 }
+EXPORT_SYMBOL(pcie_port_service_register);
 
 /**
  * pcie_port_service_unregister - unregister PCI Express port service driver
@@ -503,6 +512,4 @@ void pcie_port_service_unregister(struct pcie_port_service_driver *drv)
 {
 	driver_unregister(&drv->driver);
 }
-
-EXPORT_SYMBOL(pcie_port_service_register);
 EXPORT_SYMBOL(pcie_port_service_unregister);
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index a49452e2aed9..127e8f169d9c 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/pcieport_if.h>
 #include <linux/aer.h>
+#include <linux/dmi.h>
 
 #include "portdrv.h"
 #include "aer/aerdrv.h"
@@ -24,7 +25,7 @@
  */
 #define DRIVER_VERSION "v1.0"
 #define DRIVER_AUTHOR "tom.l.nguyen@intel.com"
-#define DRIVER_DESC "PCIE Port Bus Driver"
+#define DRIVER_DESC "PCIe Port Bus Driver"
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
@@ -63,7 +64,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
  * pcie_portdrv_probe - Probe PCI-Express port devices
  * @dev: PCI-Express port device being probed
  *
- * If detected invokes the pcie_port_device_register() method for 
+ * If detected invokes the pcie_port_device_register() method for
  * this port device.
  *
  */
@@ -78,7 +79,7 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev,
 	     (dev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)))
 		return -ENODEV;
 
-        if (!dev->irq && dev->pin) {
+	if (!dev->irq && dev->pin) {
 		dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; "
 			 "check vendor BIOS\n", dev->vendor, dev->device);
 	}
@@ -91,7 +92,7 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev,
 	return 0;
 }
 
-static void pcie_portdrv_remove (struct pci_dev *dev)
+static void pcie_portdrv_remove(struct pci_dev *dev)
 {
 	pcie_port_device_remove(dev);
 	pci_disable_device(dev);
@@ -129,14 +130,13 @@ static int error_detected_iter(struct device *device, void *data)
 static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
 					enum pci_channel_state error)
 {
-	struct aer_broadcast_data result_data =
-			{error, PCI_ERS_RESULT_CAN_RECOVER};
-	int retval;
+	struct aer_broadcast_data data = {error, PCI_ERS_RESULT_CAN_RECOVER};
+	int ret;
 
 	/* can not fail */
-	retval = device_for_each_child(&dev->dev, &result_data, error_detected_iter);
+	ret = device_for_each_child(&dev->dev, &data, error_detected_iter);
 
-	return result_data.result;
+	return data.result;
 }
 
 static int mmio_enabled_iter(struct device *device, void *data)
@@ -274,10 +274,36 @@ static struct pci_driver pcie_portdriver = {
 	.driver.pm 	= PCIE_PORTDRV_PM_OPS,
 };
 
+static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
+{
+	pr_notice("%s detected: will not use MSI for PCIe PME signaling\n",
+			d->ident);
+	pcie_pme_disable_msi();
+	return 0;
+}
+
+static struct dmi_system_id __initdata pcie_portdrv_dmi_table[] = {
+	/*
+	 * Boxes that should not use MSI for PCIe PME signaling.
+	 */
+	{
+	 .callback = dmi_pcie_pme_disable_msi,
+	 .ident = "MSI Wind U-100",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR,
+		     		"MICRO-STAR INTERNATIONAL CO., LTD"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
+		     },
+	 },
+	 {}
+};
+
 static int __init pcie_portdrv_init(void)
 {
 	int retval;
 
+	dmi_check_system(pcie_portdrv_dmi_table);
+
 	retval = pcie_port_bus_register();
 	if (retval) {
 		printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval);
@@ -290,7 +316,7 @@ static int __init pcie_portdrv_init(void)
 	return retval;
 }
 
-static void __exit pcie_portdrv_exit(void) 
+static void __exit pcie_portdrv_exit(void)
 {
 	pci_unregister_driver(&pcie_portdriver);
 	pcie_port_bus_unregister();
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 98ffb2de22e9..882bd8d29fe3 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -89,6 +89,7 @@ static void release_pcibus_dev(struct device *dev)
 
 	if (pci_bus->bridge)
 		put_device(pci_bus->bridge);
+	pci_bus_remove_resources(pci_bus);
 	kfree(pci_bus);
 }
 
@@ -173,14 +174,19 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	pci_read_config_dword(dev, pos, &sz);
 	pci_write_config_dword(dev, pos, l);
 
+	if (!sz)
+		goto fail;	/* BAR not implemented */
+
 	/*
 	 * All bits set in sz means the device isn't working properly.
-	 * If the BAR isn't implemented, all bits must be 0.  If it's a
-	 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
-	 * 1 must be clear.
+	 * If it's a memory BAR or a ROM, bit 0 must be clear; if it's
+	 * an io BAR, bit 1 must be clear.
 	 */
-	if (!sz || sz == 0xffffffff)
+	if (sz == 0xffffffff) {
+		dev_err(&dev->dev, "reg %x: invalid size %#x; broken device?\n",
+			pos, sz);
 		goto fail;
+	}
 
 	/*
 	 * I don't know how l can have all bits set.  Copied from old code.
@@ -243,13 +249,17 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 				   pos, res);
 		}
 	} else {
-		sz = pci_size(l, sz, mask);
+		u32 size = pci_size(l, sz, mask);
 
-		if (!sz)
+		if (!size) {
+			dev_err(&dev->dev, "reg %x: invalid size "
+			        "(l %#x sz %#x mask %#x); broken device?",
+				pos, l, sz, mask);
 			goto fail;
+		}
 
 		res->start = l;
-		res->end = l + sz;
+		res->end = l + size;
 
 		dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
 	}
@@ -281,26 +291,12 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
 	}
 }
 
-void __devinit pci_read_bridge_bases(struct pci_bus *child)
+static void __devinit pci_read_bridge_io(struct pci_bus *child)
 {
 	struct pci_dev *dev = child->self;
 	u8 io_base_lo, io_limit_lo;
-	u16 mem_base_lo, mem_limit_lo;
 	unsigned long base, limit;
 	struct resource *res;
-	int i;
-
-	if (pci_is_root_bus(child))	/* It's a host bus, nothing to read */
-		return;
-
-	dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n",
-		 child->secondary, child->subordinate,
-		 dev->transparent ? " (subtractive decode)": "");
-
-	if (dev->transparent) {
-		for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
-			child->resource[i] = child->parent->resource[i - 3];
-	}
 
 	res = child->resource[0];
 	pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
@@ -316,26 +312,50 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		limit |= (io_limit_hi << 16);
 	}
 
-	if (base <= limit) {
+	if (base && base <= limit) {
 		res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
 		if (!res->start)
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
 		dev_printk(KERN_DEBUG, &dev->dev, "  bridge window %pR\n", res);
+	} else {
+		dev_printk(KERN_DEBUG, &dev->dev,
+			 "  bridge window [io  %#06lx-%#06lx] (disabled)\n",
+				 base, limit);
 	}
+}
+
+static void __devinit pci_read_bridge_mmio(struct pci_bus *child)
+{
+	struct pci_dev *dev = child->self;
+	u16 mem_base_lo, mem_limit_lo;
+	unsigned long base, limit;
+	struct resource *res;
 
 	res = child->resource[1];
 	pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
 	pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
 	base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
 	limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
-	if (base <= limit) {
+	if (base && base <= limit) {
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
 		dev_printk(KERN_DEBUG, &dev->dev, "  bridge window %pR\n", res);
+	} else {
+		dev_printk(KERN_DEBUG, &dev->dev,
+			"  bridge window [mem %#010lx-%#010lx] (disabled)\n",
+					 base, limit + 0xfffff);
 	}
+}
+
+static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
+{
+	struct pci_dev *dev = child->self;
+	u16 mem_base_lo, mem_limit_lo;
+	unsigned long base, limit;
+	struct resource *res;
 
 	res = child->resource[2];
 	pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
@@ -366,7 +386,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 #endif
 		}
 	}
-	if (base <= limit) {
+	if (base && base <= limit) {
 		res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
 					 IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		if (res->flags & PCI_PREF_RANGE_TYPE_64)
@@ -374,6 +394,44 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->start = base;
 		res->end = limit + 0xfffff;
 		dev_printk(KERN_DEBUG, &dev->dev, "  bridge window %pR\n", res);
+	} else {
+		dev_printk(KERN_DEBUG, &dev->dev,
+		     "  bridge window [mem %#010lx-%#010lx pref] (disabled)\n",
+					 base, limit + 0xfffff);
+	}
+}
+
+void __devinit pci_read_bridge_bases(struct pci_bus *child)
+{
+	struct pci_dev *dev = child->self;
+	struct resource *res;
+	int i;
+
+	if (pci_is_root_bus(child))	/* It's a host bus, nothing to read */
+		return;
+
+	dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n",
+		 child->secondary, child->subordinate,
+		 dev->transparent ? " (subtractive decode)" : "");
+
+	pci_bus_remove_resources(child);
+	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
+		child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
+
+	pci_read_bridge_io(child);
+	pci_read_bridge_mmio(child);
+	pci_read_bridge_mmio_pref(child);
+
+	if (dev->transparent) {
+		pci_bus_for_each_resource(child->parent, res, i) {
+			if (res) {
+				pci_bus_add_resource(child, res,
+						     PCI_SUBTRACTIVE_DECODE);
+				dev_printk(KERN_DEBUG, &dev->dev,
+					   "  bridge window %pR (subtractive decode)\n",
+					   res);
+			}
+		}
 	}
 }
 
@@ -387,10 +445,147 @@ static struct pci_bus * pci_alloc_bus(void)
 		INIT_LIST_HEAD(&b->children);
 		INIT_LIST_HEAD(&b->devices);
 		INIT_LIST_HEAD(&b->slots);
+		INIT_LIST_HEAD(&b->resources);
+		b->max_bus_speed = PCI_SPEED_UNKNOWN;
+		b->cur_bus_speed = PCI_SPEED_UNKNOWN;
 	}
 	return b;
 }
 
+static unsigned char pcix_bus_speed[] = {
+	PCI_SPEED_UNKNOWN,		/* 0 */
+	PCI_SPEED_66MHz_PCIX,		/* 1 */
+	PCI_SPEED_100MHz_PCIX,		/* 2 */
+	PCI_SPEED_133MHz_PCIX,		/* 3 */
+	PCI_SPEED_UNKNOWN,		/* 4 */
+	PCI_SPEED_66MHz_PCIX_ECC,	/* 5 */
+	PCI_SPEED_100MHz_PCIX_ECC,	/* 6 */
+	PCI_SPEED_133MHz_PCIX_ECC,	/* 7 */
+	PCI_SPEED_UNKNOWN,		/* 8 */
+	PCI_SPEED_66MHz_PCIX_266,	/* 9 */
+	PCI_SPEED_100MHz_PCIX_266,	/* A */
+	PCI_SPEED_133MHz_PCIX_266,	/* B */
+	PCI_SPEED_UNKNOWN,		/* C */
+	PCI_SPEED_66MHz_PCIX_533,	/* D */
+	PCI_SPEED_100MHz_PCIX_533,	/* E */
+	PCI_SPEED_133MHz_PCIX_533	/* F */
+};
+
+static unsigned char pcie_link_speed[] = {
+	PCI_SPEED_UNKNOWN,		/* 0 */
+	PCIE_SPEED_2_5GT,		/* 1 */
+	PCIE_SPEED_5_0GT,		/* 2 */
+	PCIE_SPEED_8_0GT,		/* 3 */
+	PCI_SPEED_UNKNOWN,		/* 4 */
+	PCI_SPEED_UNKNOWN,		/* 5 */
+	PCI_SPEED_UNKNOWN,		/* 6 */
+	PCI_SPEED_UNKNOWN,		/* 7 */
+	PCI_SPEED_UNKNOWN,		/* 8 */
+	PCI_SPEED_UNKNOWN,		/* 9 */
+	PCI_SPEED_UNKNOWN,		/* A */
+	PCI_SPEED_UNKNOWN,		/* B */
+	PCI_SPEED_UNKNOWN,		/* C */
+	PCI_SPEED_UNKNOWN,		/* D */
+	PCI_SPEED_UNKNOWN,		/* E */
+	PCI_SPEED_UNKNOWN		/* F */
+};
+
+void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
+{
+	bus->cur_bus_speed = pcie_link_speed[linksta & 0xf];
+}
+EXPORT_SYMBOL_GPL(pcie_update_link_speed);
+
+static unsigned char agp_speeds[] = {
+	AGP_UNKNOWN,
+	AGP_1X,
+	AGP_2X,
+	AGP_4X,
+	AGP_8X
+};
+
+static enum pci_bus_speed agp_speed(int agp3, int agpstat)
+{
+	int index = 0;
+
+	if (agpstat & 4)
+		index = 3;
+	else if (agpstat & 2)
+		index = 2;
+	else if (agpstat & 1)
+		index = 1;
+	else
+		goto out;
+	
+	if (agp3) {
+		index += 2;
+		if (index == 5)
+			index = 0;
+	}
+
+ out:
+	return agp_speeds[index];
+}
+
+
+static void pci_set_bus_speed(struct pci_bus *bus)
+{
+	struct pci_dev *bridge = bus->self;
+	int pos;
+
+	pos = pci_find_capability(bridge, PCI_CAP_ID_AGP);
+	if (!pos)
+		pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3);
+	if (pos) {
+		u32 agpstat, agpcmd;
+
+		pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat);
+		bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7);
+
+		pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd);
+		bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7);
+	}
+
+	pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
+	if (pos) {
+		u16 status;
+		enum pci_bus_speed max;
+		pci_read_config_word(bridge, pos + 2, &status);
+
+		if (status & 0x8000) {
+			max = PCI_SPEED_133MHz_PCIX_533;
+		} else if (status & 0x4000) {
+			max = PCI_SPEED_133MHz_PCIX_266;
+		} else if (status & 0x0002) {
+			if (((status >> 12) & 0x3) == 2) {
+				max = PCI_SPEED_133MHz_PCIX_ECC;
+			} else {
+				max = PCI_SPEED_133MHz_PCIX;
+			}
+		} else {
+			max = PCI_SPEED_66MHz_PCIX;
+		}
+
+		bus->max_bus_speed = max;
+		bus->cur_bus_speed = pcix_bus_speed[(status >> 6) & 0xf];
+
+		return;
+	}
+
+	pos = pci_find_capability(bridge, PCI_CAP_ID_EXP);
+	if (pos) {
+		u32 linkcap;
+		u16 linksta;
+
+		pci_read_config_dword(bridge, pos + PCI_EXP_LNKCAP, &linkcap);
+		bus->max_bus_speed = pcie_link_speed[linkcap & 0xf];
+
+		pci_read_config_word(bridge, pos + PCI_EXP_LNKSTA, &linksta);
+		pcie_update_link_speed(bus, linksta);
+	}
+}
+
+
 static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 					   struct pci_dev *bridge, int busnr)
 {
@@ -430,6 +625,8 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 	child->self = bridge;
 	child->bridge = get_device(&bridge->dev);
 
+	pci_set_bus_speed(child);
+
 	/* Set up default resource pointers and names.. */
 	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
 		child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
@@ -485,16 +682,20 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 	int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
 	u32 buses, i, j = 0;
 	u16 bctl;
+	u8 primary, secondary, subordinate;
 	int broken = 0;
 
 	pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
+	primary = buses & 0xFF;
+	secondary = (buses >> 8) & 0xFF;
+	subordinate = (buses >> 16) & 0xFF;
 
-	dev_dbg(&dev->dev, "scanning behind bridge, config %06x, pass %d\n",
-		buses & 0xffffff, pass);
+	dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
+		secondary, subordinate, pass);
 
 	/* Check if setup is sensible at all */
 	if (!pass &&
-	    ((buses & 0xff) != bus->number || ((buses >> 8) & 0xff) <= bus->number)) {
+	    (primary != bus->number || secondary <= bus->number)) {
 		dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n");
 		broken = 1;
 	}
@@ -505,15 +706,15 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 	pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
 			      bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
 
-	if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus && !broken) {
-		unsigned int cmax, busnr;
+	if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
+	    !is_cardbus && !broken) {
+		unsigned int cmax;
 		/*
 		 * Bus already configured by firmware, process it in the first
 		 * pass and just note the configuration.
 		 */
 		if (pass)
 			goto out;
-		busnr = (buses >> 8) & 0xFF;
 
 		/*
 		 * If we already got to this bus through a different bridge,
@@ -522,13 +723,13 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 		 * However, we continue to descend down the hierarchy and
 		 * scan remaining child buses.
 		 */
-		child = pci_find_bus(pci_domain_nr(bus), busnr);
+		child = pci_find_bus(pci_domain_nr(bus), secondary);
 		if (!child) {
-			child = pci_add_new_bus(bus, dev, busnr);
+			child = pci_add_new_bus(bus, dev, secondary);
 			if (!child)
 				goto out;
-			child->primary = buses & 0xFF;
-			child->subordinate = (buses >> 16) & 0xFF;
+			child->primary = primary;
+			child->subordinate = subordinate;
 			child->bridge_ctl = bctl;
 		}
 
@@ -681,7 +882,7 @@ static void pci_read_irq(struct pci_dev *dev)
 	dev->irq = irq;
 }
 
-static void set_pcie_port_type(struct pci_dev *pdev)
+void set_pcie_port_type(struct pci_dev *pdev)
 {
 	int pos;
 	u16 reg16;
@@ -695,7 +896,7 @@ static void set_pcie_port_type(struct pci_dev *pdev)
 	pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
 }
 
-static void set_pcie_hotplug_bridge(struct pci_dev *pdev)
+void set_pcie_hotplug_bridge(struct pci_dev *pdev)
 {
 	int pos;
 	u16 reg16;
@@ -1081,6 +1282,45 @@ struct pci_dev *__ref pci_scan_single_device(struct pci_bus *bus, int devfn)
 }
 EXPORT_SYMBOL(pci_scan_single_device);
 
+static unsigned next_ari_fn(struct pci_dev *dev, unsigned fn)
+{
+	u16 cap;
+	unsigned pos, next_fn;
+
+	if (!dev)
+		return 0;
+
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
+	if (!pos)
+		return 0;
+	pci_read_config_word(dev, pos + 4, &cap);
+	next_fn = cap >> 8;
+	if (next_fn <= fn)
+		return 0;
+	return next_fn;
+}
+
+static unsigned next_trad_fn(struct pci_dev *dev, unsigned fn)
+{
+	return (fn + 1) % 8;
+}
+
+static unsigned no_next_fn(struct pci_dev *dev, unsigned fn)
+{
+	return 0;
+}
+
+static int only_one_child(struct pci_bus *bus)
+{
+	struct pci_dev *parent = bus->self;
+	if (!parent || !pci_is_pcie(parent))
+		return 0;
+	if (parent->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
+	    parent->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
+		return 1;
+	return 0;
+}
+
 /**
  * pci_scan_slot - scan a PCI slot on a bus for devices.
  * @bus: PCI bus to scan
@@ -1094,21 +1334,30 @@ EXPORT_SYMBOL(pci_scan_single_device);
  */
 int pci_scan_slot(struct pci_bus *bus, int devfn)
 {
-	int fn, nr = 0;
+	unsigned fn, nr = 0;
 	struct pci_dev *dev;
+	unsigned (*next_fn)(struct pci_dev *, unsigned) = no_next_fn;
+
+	if (only_one_child(bus) && (devfn > 0))
+		return 0; /* Already scanned the entire slot */
 
 	dev = pci_scan_single_device(bus, devfn);
-	if (dev && !dev->is_added)	/* new device? */
+	if (!dev)
+		return 0;
+	if (!dev->is_added)
 		nr++;
 
-	if (dev && dev->multifunction) {
-		for (fn = 1; fn < 8; fn++) {
-			dev = pci_scan_single_device(bus, devfn + fn);
-			if (dev) {
-				if (!dev->is_added)
-					nr++;
-				dev->multifunction = 1;
-			}
+	if (pci_ari_enabled(bus))
+		next_fn = next_ari_fn;
+	else if (dev->multifunction)
+		next_fn = next_trad_fn;
+
+	for (fn = next_fn(dev, 0); fn > 0; fn = next_fn(dev, fn)) {
+		dev = pci_scan_single_device(bus, devfn + fn);
+		if (dev) {
+			if (!dev->is_added)
+				nr++;
+			dev->multifunction = 1;
 		}
 	}
 
@@ -1200,6 +1449,7 @@ struct pci_bus * pci_create_bus(struct device *parent,
 	if (error)
 		goto dev_reg_err;
 	b->bridge = get_device(dev);
+	device_enable_async_suspend(b->bridge);
 
 	if (!parent)
 		set_dev_node(b->bridge, pcibus_to_node(b));
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7cfa7c38d318..3ea0b29c0104 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -25,14 +25,9 @@
 #include <linux/dmi.h>
 #include <linux/pci-aspm.h>
 #include <linux/ioport.h>
+#include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
 
-int isa_dma_bridge_buggy;
-EXPORT_SYMBOL(isa_dma_bridge_buggy);
-int pci_pci_problems;
-EXPORT_SYMBOL(pci_pci_problems);
-
-#ifdef CONFIG_PCI_QUIRKS
 /*
  * This quirk function disables memory decoding and releases memory resources
  * of the device specified by kernel's boot parameter 'pci=resource_alignment='.
@@ -338,6 +333,23 @@ static void __devinit quirk_s3_64M(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3,	PCI_DEVICE_ID_S3_868,		quirk_s3_64M);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3,	PCI_DEVICE_ID_S3_968,		quirk_s3_64M);
 
+/*
+ * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS
+ * ver. 1.33  20070103) don't set the correct ISA PCI region header info.
+ * BAR0 should be 8 bytes; instead, it may be set to something like 8k
+ * (which conflicts w/ BAR1's memory range).
+ */
+static void __devinit quirk_cs5536_vsa(struct pci_dev *dev)
+{
+	if (pci_resource_len(dev, 0) != 8) {
+		struct resource *res = &dev->resource[0];
+		res->end = res->start + 8 - 1;
+		dev_info(&dev->dev, "CS5536 ISA bridge bug detected "
+				"(incorrect header); workaround applied.\n");
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
+
 static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
 	unsigned size, int nr, const char *name)
 {
@@ -356,8 +368,9 @@ static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
 		bus_region.end = res->end;
 		pcibios_bus_to_resource(dev, res, &bus_region);
 
-		pci_claim_resource(dev, nr);
-		dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name);
+		if (pci_claim_resource(dev, nr) == 0)
+			dev_info(&dev->dev, "quirk: %pR claimed by %s\n",
+				 res, name);
 	}
 }	
 
@@ -1965,11 +1978,25 @@ static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
 	/*
 	 * Disable PCI Bus Parking and PCI Master read caching on CX700
 	 * which causes unspecified timing errors with a VT6212L on the PCI
-	 * bus leading to USB2.0 packet loss. The defaults are that these
-	 * features are turned off but some BIOSes turn them on.
+	 * bus leading to USB2.0 packet loss.
+	 *
+	 * This quirk is only enabled if a second (on the external PCI bus)
+	 * VT6212L is found -- the CX700 core itself also contains a USB
+	 * host controller with the same PCI ID as the VT6212L.
 	 */
 
+	/* Count VT6212L instances */
+	struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA,
+		PCI_DEVICE_ID_VIA_8235_USB_2, NULL);
 	uint8_t b;
+
+	/* p should contain the first (internal) VT6212L -- see if we have
+	   an external one by searching again */
+	p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p);
+	if (!p)
+		return;
+	pci_dev_put(p);
+
 	if (pci_read_config_byte(dev, 0x76, &b) == 0) {
 		if (b & 0x40) {
 			/* Turn off PCI Bus Parking */
@@ -1996,7 +2023,7 @@ static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
 		}
 	}
 }
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
 
 /*
  * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
@@ -2096,6 +2123,7 @@ static void __devinit quirk_disable_msi(struct pci_dev *dev)
 	}
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi);
 
 /* Go through the list of Hypertransport capabilities and
  * return 1 if a HT MSI capability is found and enabled */
@@ -2467,6 +2495,39 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374,
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375,
 			quirk_msi_intx_disable_bug);
 
+/*
+ * MSI does not work with the AMD RS780/RS880 internal graphics and HDMI audio
+ * devices unless the BIOS has initialized the nb_cntl.strap_msi_enable bit.
+ */
+static void __init rs780_int_gfx_disable_msi(struct pci_dev *int_gfx_bridge)
+{
+	u32 nb_cntl;
+
+	if (!int_gfx_bridge->subordinate)
+		return;
+
+	pci_bus_write_config_dword(int_gfx_bridge->bus, PCI_DEVFN(0, 0),
+				   0x60, 0);
+	pci_bus_read_config_dword(int_gfx_bridge->bus, PCI_DEVFN(0, 0),
+				  0x64, &nb_cntl);
+
+	if (!(nb_cntl & BIT(10))) {
+		dev_warn(&int_gfx_bridge->dev,
+			 FW_WARN "RS780: MSI for internal graphics disabled\n");
+		int_gfx_bridge->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+	}
+}
+
+#define PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX	0x9602
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD,
+			PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX,
+			rs780_int_gfx_disable_msi);
+/* wrong vendor ID on M4A785TD motherboard: */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASUSTEK,
+			PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX,
+			rs780_int_gfx_disable_msi);
+
 #endif /* CONFIG_PCI_MSI */
 
 #ifdef CONFIG_PCI_IOV
@@ -2517,9 +2578,95 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e7, quirk_i82576_sriov);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e8, quirk_i82576_sriov);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150a, quirk_i82576_sriov);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150d, quirk_i82576_sriov);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov);
 
 #endif	/* CONFIG_PCI_IOV */
 
+/*
+ * This is a quirk for the Ricoh MMC controller found as a part of
+ * some mulifunction chips.
+
+ * This is very similiar and based on the ricoh_mmc driver written by
+ * Philip Langdale. Thank you for these magic sequences.
+ *
+ * These chips implement the four main memory card controllers (SD, MMC, MS, xD)
+ * and one or both of cardbus or firewire.
+ *
+ * It happens that they implement SD and MMC
+ * support as separate controllers (and PCI functions). The linux SDHCI
+ * driver supports MMC cards but the chip detects MMC cards in hardware
+ * and directs them to the MMC controller - so the SDHCI driver never sees
+ * them.
+ *
+ * To get around this, we must disable the useless MMC controller.
+ * At that point, the SDHCI controller will start seeing them
+ * It seems to be the case that the relevant PCI registers to deactivate the
+ * MMC controller live on PCI function 0, which might be the cardbus controller
+ * or the firewire controller, depending on the particular chip in question
+ *
+ * This has to be done early, because as soon as we disable the MMC controller
+ * other pci functions shift up one level, e.g. function #2 becomes function
+ * #1, and this will confuse the pci core.
+ */
+
+#ifdef CONFIG_MMC_RICOH_MMC
+static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev)
+{
+	/* disable via cardbus interface */
+	u8 write_enable;
+	u8 write_target;
+	u8 disable;
+
+	/* disable must be done via function #0 */
+	if (PCI_FUNC(dev->devfn))
+		return;
+
+	pci_read_config_byte(dev, 0xB7, &disable);
+	if (disable & 0x02)
+		return;
+
+	pci_read_config_byte(dev, 0x8E, &write_enable);
+	pci_write_config_byte(dev, 0x8E, 0xAA);
+	pci_read_config_byte(dev, 0x8D, &write_target);
+	pci_write_config_byte(dev, 0x8D, 0xB7);
+	pci_write_config_byte(dev, 0xB7, disable | 0x02);
+	pci_write_config_byte(dev, 0x8E, write_enable);
+	pci_write_config_byte(dev, 0x8D, write_target);
+
+	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n");
+	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
+
+static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
+{
+	/* disable via firewire interface */
+	u8 write_enable;
+	u8 disable;
+
+	/* disable must be done via function #0 */
+	if (PCI_FUNC(dev->devfn))
+		return;
+
+	pci_read_config_byte(dev, 0xCB, &disable);
+
+	if (disable & 0x02)
+		return;
+
+	pci_read_config_byte(dev, 0xCA, &write_enable);
+	pci_write_config_byte(dev, 0xCA, 0x57);
+	pci_write_config_byte(dev, 0xCB, disable | 0x02);
+	pci_write_config_byte(dev, 0xCA, write_enable);
+
+	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
+	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+#endif /*CONFIG_MMC_RICOH_MMC*/
+
+
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
 			  struct pci_fixup *end)
 {
@@ -2595,6 +2742,7 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
 	}
 	pci_do_fixups(dev, start, end);
 }
+EXPORT_SYMBOL(pci_fixup_device);
 
 static int __init pci_apply_final_quirks(void)
 {
@@ -2629,14 +2777,80 @@ static int __init pci_apply_final_quirks(void)
 	if (!pci_cache_line_size) {
 		printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n",
 		       cls << 2, pci_dfl_cache_line_size << 2);
-		pci_cache_line_size = cls;
+		pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size;
 	}
 
 	return 0;
 }
 
 fs_initcall_sync(pci_apply_final_quirks);
-#else
-void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {}
-#endif
-EXPORT_SYMBOL(pci_fixup_device);
+
+/*
+ * Followings are device-specific reset methods which can be used to
+ * reset a single function if other methods (e.g. FLR, PM D0->D3) are
+ * not available.
+ */
+static int reset_intel_generic_dev(struct pci_dev *dev, int probe)
+{
+	int pos;
+
+	/* only implement PCI_CLASS_SERIAL_USB at present */
+	if (dev->class == PCI_CLASS_SERIAL_USB) {
+		pos = pci_find_capability(dev, PCI_CAP_ID_VNDR);
+		if (!pos)
+			return -ENOTTY;
+
+		if (probe)
+			return 0;
+
+		pci_write_config_byte(dev, pos + 0x4, 1);
+		msleep(100);
+
+		return 0;
+	} else {
+		return -ENOTTY;
+	}
+}
+
+static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe)
+{
+	int pos;
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (!pos)
+		return -ENOTTY;
+
+	if (probe)
+		return 0;
+
+	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
+				PCI_EXP_DEVCTL_BCR_FLR);
+	msleep(100);
+
+	return 0;
+}
+
+#define PCI_DEVICE_ID_INTEL_82599_SFP_VF   0x10ed
+
+static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
+		 reset_intel_82599_sfp_virtfn },
+	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+		reset_intel_generic_dev },
+	{ 0 }
+};
+
+int pci_dev_specific_reset(struct pci_dev *dev, int probe)
+{
+	const struct pci_dev_reset_methods *i;
+
+	for (i = pci_dev_reset_methods; i->reset; i++) {
+		if ((i->vendor == dev->vendor ||
+		     i->vendor == (u16)PCI_ANY_ID) &&
+		    (i->device == dev->device ||
+		     i->device == (u16)PCI_ANY_ID))
+			return i->reset(dev, probe);
+	}
+
+	return -ENOTTY;
+}
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 6dae87143258..4a471dc4f4b9 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -15,9 +15,9 @@
 
 DECLARE_RWSEM(pci_bus_sem);
 /*
- * find the upstream PCIE-to-PCI bridge of a PCI device
+ * find the upstream PCIe-to-PCI bridge of a PCI device
  * if the device is PCIE, return NULL
- * if the device isn't connected to a PCIE bridge (that is its parent is a
+ * if the device isn't connected to a PCIe bridge (that is its parent is a
  * legacy PCI bridge and the bridge is directly connected to bus 0), return its
  * parent
  */
@@ -37,7 +37,7 @@ pci_find_upstream_pcie_bridge(struct pci_dev *pdev)
 			tmp = pdev;
 			continue;
 		}
-		/* PCI device should connect to a PCIE bridge */
+		/* PCI device should connect to a PCIe bridge */
 		if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) {
 			/* Busted hardware? */
 			WARN_ON_ONCE(1);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index c48cd377b3f5..4fe36d2e1049 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -27,37 +27,91 @@
 #include <linux/slab.h>
 #include "pci.h"
 
-static void pbus_assign_resources_sorted(const struct pci_bus *bus)
-{
-	struct pci_dev *dev;
+struct resource_list_x {
+	struct resource_list_x *next;
 	struct resource *res;
-	struct resource_list head, *list, *tmp;
-	int idx;
+	struct pci_dev *dev;
+	resource_size_t start;
+	resource_size_t end;
+	unsigned long flags;
+};
 
-	head.next = NULL;
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 class = dev->class >> 8;
+static void add_to_failed_list(struct resource_list_x *head,
+				 struct pci_dev *dev, struct resource *res)
+{
+	struct resource_list_x *list = head;
+	struct resource_list_x *ln = list->next;
+	struct resource_list_x *tmp;
 
-		/* Don't touch classless devices or host bridges or ioapics.  */
-		if (class == PCI_CLASS_NOT_DEFINED ||
-		    class == PCI_CLASS_BRIDGE_HOST)
-			continue;
+	tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
+	if (!tmp) {
+		pr_warning("add_to_failed_list: kmalloc() failed!\n");
+		return;
+	}
 
-		/* Don't touch ioapic devices already enabled by firmware */
-		if (class == PCI_CLASS_SYSTEM_PIC) {
-			u16 command;
-			pci_read_config_word(dev, PCI_COMMAND, &command);
-			if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
-				continue;
-		}
+	tmp->next = ln;
+	tmp->res = res;
+	tmp->dev = dev;
+	tmp->start = res->start;
+	tmp->end = res->end;
+	tmp->flags = res->flags;
+	list->next = tmp;
+}
+
+static void free_failed_list(struct resource_list_x *head)
+{
+	struct resource_list_x *list, *tmp;
 
-		pdev_sort_resources(dev, &head);
+	for (list = head->next; list;) {
+		tmp = list;
+		list = list->next;
+		kfree(tmp);
 	}
 
-	for (list = head.next; list;) {
+	head->next = NULL;
+}
+
+static void __dev_sort_resources(struct pci_dev *dev,
+				 struct resource_list *head)
+{
+	u16 class = dev->class >> 8;
+
+	/* Don't touch classless devices or host bridges or ioapics.  */
+	if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST)
+		return;
+
+	/* Don't touch ioapic devices already enabled by firmware */
+	if (class == PCI_CLASS_SYSTEM_PIC) {
+		u16 command;
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
+			return;
+	}
+
+	pdev_sort_resources(dev, head);
+}
+
+static void __assign_resources_sorted(struct resource_list *head,
+				 struct resource_list_x *fail_head)
+{
+	struct resource *res;
+	struct resource_list *list, *tmp;
+	int idx;
+
+	for (list = head->next; list;) {
 		res = list->res;
 		idx = res - &list->dev->resource[0];
+
 		if (pci_assign_resource(list->dev, idx)) {
+			if (fail_head && !pci_is_root_bus(list->dev->bus)) {
+				/*
+				 * if the failed res is for ROM BAR, and it will
+				 * be enabled later, don't add it to the list
+				 */
+				if (!((idx == PCI_ROM_RESOURCE) &&
+				      (!(res->flags & IORESOURCE_ROM_ENABLE))))
+					add_to_failed_list(fail_head, list->dev, res);
+			}
 			res->start = 0;
 			res->end = 0;
 			res->flags = 0;
@@ -68,6 +122,30 @@ static void pbus_assign_resources_sorted(const struct pci_bus *bus)
 	}
 }
 
+static void pdev_assign_resources_sorted(struct pci_dev *dev,
+				 struct resource_list_x *fail_head)
+{
+	struct resource_list head;
+
+	head.next = NULL;
+	__dev_sort_resources(dev, &head);
+	__assign_resources_sorted(&head, fail_head);
+
+}
+
+static void pbus_assign_resources_sorted(const struct pci_bus *bus,
+					 struct resource_list_x *fail_head)
+{
+	struct pci_dev *dev;
+	struct resource_list head;
+
+	head.next = NULL;
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		__dev_sort_resources(dev, &head);
+
+	__assign_resources_sorted(&head, fail_head);
+}
+
 void pci_setup_cardbus(struct pci_bus *bus)
 {
 	struct pci_dev *bridge = bus->self;
@@ -134,18 +212,12 @@ EXPORT_SYMBOL(pci_setup_cardbus);
    config space writes, so it's quite possible that an I/O window of
    the bridge will have some undesirable address (e.g. 0) after the
    first write. Ditto 64-bit prefetchable MMIO.  */
-static void pci_setup_bridge(struct pci_bus *bus)
+static void pci_setup_bridge_io(struct pci_bus *bus)
 {
 	struct pci_dev *bridge = bus->self;
 	struct resource *res;
 	struct pci_bus_region region;
-	u32 l, bu, lu, io_upper16;
-
-	if (pci_is_enabled(bridge))
-		return;
-
-	dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n",
-		 bus->secondary, bus->subordinate);
+	u32 l, io_upper16;
 
 	/* Set up the top and bottom of the PCI I/O segment for this bus. */
 	res = bus->resource[0];
@@ -158,8 +230,7 @@ static void pci_setup_bridge(struct pci_bus *bus)
 		/* Set up upper 16 bits of I/O base/limit. */
 		io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
-	}
-	else {
+	} else {
 		/* Clear upper 16 bits of I/O base/limit. */
 		io_upper16 = 0;
 		l = 0x00f0;
@@ -171,21 +242,35 @@ static void pci_setup_bridge(struct pci_bus *bus)
 	pci_write_config_dword(bridge, PCI_IO_BASE, l);
 	/* Update upper 16 bits of I/O base/limit. */
 	pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
+}
+
+static void pci_setup_bridge_mmio(struct pci_bus *bus)
+{
+	struct pci_dev *bridge = bus->self;
+	struct resource *res;
+	struct pci_bus_region region;
+	u32 l;
 
-	/* Set up the top and bottom of the PCI Memory segment
-	   for this bus. */
+	/* Set up the top and bottom of the PCI Memory segment for this bus. */
 	res = bus->resource[1];
 	pcibios_resource_to_bus(bridge, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
-	}
-	else {
+	} else {
 		l = 0x0000fff0;
 		dev_info(&bridge->dev, "  bridge window [mem disabled]\n");
 	}
 	pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
+}
+
+static void pci_setup_bridge_mmio_pref(struct pci_bus *bus)
+{
+	struct pci_dev *bridge = bus->self;
+	struct resource *res;
+	struct pci_bus_region region;
+	u32 l, bu, lu;
 
 	/* Clear out the upper 32 bits of PREF limit.
 	   If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily
@@ -204,8 +289,7 @@ static void pci_setup_bridge(struct pci_bus *bus)
 			lu = upper_32_bits(region.end);
 		}
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
-	}
-	else {
+	} else {
 		l = 0x0000fff0;
 		dev_info(&bridge->dev, "  bridge window [mem pref disabled]\n");
 	}
@@ -214,10 +298,35 @@ static void pci_setup_bridge(struct pci_bus *bus)
 	/* Set the upper 32 bits of PREF base & limit. */
 	pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
 	pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
+}
+
+static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type)
+{
+	struct pci_dev *bridge = bus->self;
+
+	dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n",
+		 bus->secondary, bus->subordinate);
+
+	if (type & IORESOURCE_IO)
+		pci_setup_bridge_io(bus);
+
+	if (type & IORESOURCE_MEM)
+		pci_setup_bridge_mmio(bus);
+
+	if (type & IORESOURCE_PREFETCH)
+		pci_setup_bridge_mmio_pref(bus);
 
 	pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
 }
 
+static void pci_setup_bridge(struct pci_bus *bus)
+{
+	unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
+				  IORESOURCE_PREFETCH;
+
+	__pci_setup_bridge(bus, type);
+}
+
 /* Check whether the bridge supports optional I/O and
    prefetchable memory ranges. If not, the respective
    base/limit registers must be read-only and read as 0. */
@@ -253,8 +362,11 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
 	}
 	if (pmem) {
 		b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
-		if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64)
+		if ((pmem & PCI_PREF_RANGE_TYPE_MASK) ==
+		    PCI_PREF_RANGE_TYPE_64) {
 			b_res[2].flags |= IORESOURCE_MEM_64;
+			b_res[2].flags |= PCI_PREF_RANGE_TYPE_64;
+		}
 	}
 
 	/* double check if bridge does support 64 bit pref */
@@ -283,8 +395,7 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned lon
 	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
 				  IORESOURCE_PREFETCH;
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		r = bus->resource[i];
+	pci_bus_for_each_resource(bus, r, i) {
 		if (r == &ioport_resource || r == &iomem_resource)
 			continue;
 		if (r && (r->flags & type_mask) == type && !r->parent)
@@ -301,7 +412,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size)
 {
 	struct pci_dev *dev;
 	struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO);
-	unsigned long size = 0, size1 = 0;
+	unsigned long size = 0, size1 = 0, old_size;
 
 	if (!b_res)
  		return;
@@ -326,12 +437,17 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size)
 	}
 	if (size < min_size)
 		size = min_size;
+	old_size = resource_size(b_res);
+	if (old_size == 1)
+		old_size = 0;
 /* To be fixed in 2.5: we should have sort of HAVE_ISA
    flag in the struct pci_bus. */
 #if defined(CONFIG_ISA) || defined(CONFIG_EISA)
 	size = (size & 0xff) + ((size & ~0xffUL) << 2);
 #endif
 	size = ALIGN(size + size1, 4096);
+	if (size < old_size)
+		size = old_size;
 	if (!size) {
 		if (b_res->start || b_res->end)
 			dev_info(&bus->self->dev, "disabling bridge window "
@@ -352,7 +468,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 			 unsigned long type, resource_size_t min_size)
 {
 	struct pci_dev *dev;
-	resource_size_t min_align, align, size;
+	resource_size_t min_align, align, size, old_size;
 	resource_size_t aligns[12];	/* Alignments from 1Mb to 2Gb */
 	int order, max_order;
 	struct resource *b_res = find_free_bus_resource(bus, type);
@@ -402,6 +518,11 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 	}
 	if (size < min_size)
 		size = min_size;
+	old_size = resource_size(b_res);
+	if (old_size == 1)
+		old_size = 0;
+	if (size < old_size)
+		size = old_size;
 
 	align = 0;
 	min_align = 0;
@@ -538,23 +659,25 @@ void __ref pci_bus_size_bridges(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pci_bus_size_bridges);
 
-void __ref pci_bus_assign_resources(const struct pci_bus *bus)
+static void __ref __pci_bus_assign_resources(const struct pci_bus *bus,
+					 struct resource_list_x *fail_head)
 {
 	struct pci_bus *b;
 	struct pci_dev *dev;
 
-	pbus_assign_resources_sorted(bus);
+	pbus_assign_resources_sorted(bus, fail_head);
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		b = dev->subordinate;
 		if (!b)
 			continue;
 
-		pci_bus_assign_resources(b);
+		__pci_bus_assign_resources(b, fail_head);
 
 		switch (dev->class >> 8) {
 		case PCI_CLASS_BRIDGE_PCI:
-			pci_setup_bridge(b);
+			if (!pci_is_enabled(dev))
+				pci_setup_bridge(b);
 			break;
 
 		case PCI_CLASS_BRIDGE_CARDBUS:
@@ -568,15 +691,130 @@ void __ref pci_bus_assign_resources(const struct pci_bus *bus)
 		}
 	}
 }
+
+void __ref pci_bus_assign_resources(const struct pci_bus *bus)
+{
+	__pci_bus_assign_resources(bus, NULL);
+}
 EXPORT_SYMBOL(pci_bus_assign_resources);
 
+static void __ref __pci_bridge_assign_resources(const struct pci_dev *bridge,
+					 struct resource_list_x *fail_head)
+{
+	struct pci_bus *b;
+
+	pdev_assign_resources_sorted((struct pci_dev *)bridge, fail_head);
+
+	b = bridge->subordinate;
+	if (!b)
+		return;
+
+	__pci_bus_assign_resources(b, fail_head);
+
+	switch (bridge->class >> 8) {
+	case PCI_CLASS_BRIDGE_PCI:
+		pci_setup_bridge(b);
+		break;
+
+	case PCI_CLASS_BRIDGE_CARDBUS:
+		pci_setup_cardbus(b);
+		break;
+
+	default:
+		dev_info(&bridge->dev, "not setting up bridge for bus "
+			 "%04x:%02x\n", pci_domain_nr(b), b->number);
+		break;
+	}
+}
+static void pci_bridge_release_resources(struct pci_bus *bus,
+					  unsigned long type)
+{
+	int idx;
+	bool changed = false;
+	struct pci_dev *dev;
+	struct resource *r;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+				  IORESOURCE_PREFETCH;
+
+	dev = bus->self;
+	for (idx = PCI_BRIDGE_RESOURCES; idx <= PCI_BRIDGE_RESOURCE_END;
+	     idx++) {
+		r = &dev->resource[idx];
+		if ((r->flags & type_mask) != type)
+			continue;
+		if (!r->parent)
+			continue;
+		/*
+		 * if there are children under that, we should release them
+		 *  all
+		 */
+		release_child_resources(r);
+		if (!release_resource(r)) {
+			dev_printk(KERN_DEBUG, &dev->dev,
+				 "resource %d %pR released\n", idx, r);
+			/* keep the old size */
+			r->end = resource_size(r) - 1;
+			r->start = 0;
+			r->flags = 0;
+			changed = true;
+		}
+	}
+
+	if (changed) {
+		/* avoiding touch the one without PREF */
+		if (type & IORESOURCE_PREFETCH)
+			type = IORESOURCE_PREFETCH;
+		__pci_setup_bridge(bus, type);
+	}
+}
+
+enum release_type {
+	leaf_only,
+	whole_subtree,
+};
+/*
+ * try to release pci bridge resources that is from leaf bridge,
+ * so we can allocate big new one later
+ */
+static void __ref pci_bus_release_bridge_resources(struct pci_bus *bus,
+						   unsigned long type,
+						   enum release_type rel_type)
+{
+	struct pci_dev *dev;
+	bool is_leaf_bridge = true;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		struct pci_bus *b = dev->subordinate;
+		if (!b)
+			continue;
+
+		is_leaf_bridge = false;
+
+		if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+			continue;
+
+		if (rel_type == whole_subtree)
+			pci_bus_release_bridge_resources(b, type,
+						 whole_subtree);
+	}
+
+	if (pci_is_root_bus(bus))
+		return;
+
+	if ((bus->self->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+		return;
+
+	if ((rel_type == whole_subtree) || is_leaf_bridge)
+		pci_bridge_release_resources(bus, type);
+}
+
 static void pci_bus_dump_res(struct pci_bus *bus)
 {
-        int i;
+	struct resource *res;
+	int i;
 
-        for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-                struct resource *res = bus->resource[i];
-                if (!res || !res->end)
+	pci_bus_for_each_resource(bus, res, i) {
+		if (!res || !res->end || !res->flags)
                         continue;
 
 		dev_printk(KERN_DEBUG, &bus->dev, "resource %d %pR\n", i, res);
@@ -600,11 +838,65 @@ static void pci_bus_dump_resources(struct pci_bus *bus)
 	}
 }
 
+static int __init pci_bus_get_depth(struct pci_bus *bus)
+{
+	int depth = 0;
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		int ret;
+		struct pci_bus *b = dev->subordinate;
+		if (!b)
+			continue;
+
+		ret = pci_bus_get_depth(b);
+		if (ret + 1 > depth)
+			depth = ret + 1;
+	}
+
+	return depth;
+}
+static int __init pci_get_max_depth(void)
+{
+	int depth = 0;
+	struct pci_bus *bus;
+
+	list_for_each_entry(bus, &pci_root_buses, node) {
+		int ret;
+
+		ret = pci_bus_get_depth(bus);
+		if (ret > depth)
+			depth = ret;
+	}
+
+	return depth;
+}
+
+/*
+ * first try will not touch pci bridge res
+ * second  and later try will clear small leaf bridge res
+ * will stop till to the max  deepth if can not find good one
+ */
 void __init
 pci_assign_unassigned_resources(void)
 {
 	struct pci_bus *bus;
+	int tried_times = 0;
+	enum release_type rel_type = leaf_only;
+	struct resource_list_x head, *list;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+				  IORESOURCE_PREFETCH;
+	unsigned long failed_type;
+	int max_depth = pci_get_max_depth();
+	int pci_try_num;
+
+	head.next = NULL;
+
+	pci_try_num = max_depth + 1;
+	printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
+		 max_depth, pci_try_num);
 
+again:
 	/* Depth first, calculate sizes and alignments of all
 	   subordinate buses. */
 	list_for_each_entry(bus, &pci_root_buses, node) {
@@ -612,12 +904,130 @@ pci_assign_unassigned_resources(void)
 	}
 	/* Depth last, allocate resources and update the hardware. */
 	list_for_each_entry(bus, &pci_root_buses, node) {
-		pci_bus_assign_resources(bus);
-		pci_enable_bridges(bus);
+		__pci_bus_assign_resources(bus, &head);
 	}
+	tried_times++;
+
+	/* any device complain? */
+	if (!head.next)
+		goto enable_and_dump;
+	failed_type = 0;
+	for (list = head.next; list;) {
+		failed_type |= list->flags;
+		list = list->next;
+	}
+	/*
+	 * io port are tight, don't try extra
+	 * or if reach the limit, don't want to try more
+	 */
+	failed_type &= type_mask;
+	if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) {
+		free_failed_list(&head);
+		goto enable_and_dump;
+	}
+
+	printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
+			 tried_times + 1);
+
+	/* third times and later will not check if it is leaf */
+	if ((tried_times + 1) > 2)
+		rel_type = whole_subtree;
+
+	/*
+	 * Try to release leaf bridge's resources that doesn't fit resource of
+	 * child device under that bridge
+	 */
+	for (list = head.next; list;) {
+		bus = list->dev->bus;
+		pci_bus_release_bridge_resources(bus, list->flags & type_mask,
+						  rel_type);
+		list = list->next;
+	}
+	/* restore size and flags */
+	for (list = head.next; list;) {
+		struct resource *res = list->res;
+
+		res->start = list->start;
+		res->end = list->end;
+		res->flags = list->flags;
+		if (list->dev->subordinate)
+			res->flags = 0;
+
+		list = list->next;
+	}
+	free_failed_list(&head);
+
+	goto again;
+
+enable_and_dump:
+	/* Depth last, update the hardware. */
+	list_for_each_entry(bus, &pci_root_buses, node)
+		pci_enable_bridges(bus);
 
 	/* dump the resource on buses */
 	list_for_each_entry(bus, &pci_root_buses, node) {
 		pci_bus_dump_resources(bus);
 	}
 }
+
+void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
+{
+	struct pci_bus *parent = bridge->subordinate;
+	int tried_times = 0;
+	struct resource_list_x head, *list;
+	int retval;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+				  IORESOURCE_PREFETCH;
+
+	head.next = NULL;
+
+again:
+	pci_bus_size_bridges(parent);
+	__pci_bridge_assign_resources(bridge, &head);
+	retval = pci_reenable_device(bridge);
+	pci_set_master(bridge);
+	pci_enable_bridges(parent);
+
+	tried_times++;
+
+	if (!head.next)
+		return;
+
+	if (tried_times >= 2) {
+		/* still fail, don't need to try more */
+		free_failed_list(&head);
+		return;
+	}
+
+	printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
+			 tried_times + 1);
+
+	/*
+	 * Try to release leaf bridge's resources that doesn't fit resource of
+	 * child device under that bridge
+	 */
+	for (list = head.next; list;) {
+		struct pci_bus *bus = list->dev->bus;
+		unsigned long flags = list->flags;
+
+		pci_bus_release_bridge_resources(bus, flags & type_mask,
+						 whole_subtree);
+		list = list->next;
+	}
+	/* restore size and flags */
+	for (list = head.next; list;) {
+		struct resource *res = list->res;
+
+		res->start = list->start;
+		res->end = list->end;
+		res->flags = list->flags;
+		if (list->dev->subordinate)
+			res->flags = 0;
+
+		list = list->next;
+	}
+	free_failed_list(&head);
+
+	goto again;
+}
+EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 7d678bb15ffb..17bed18d24ad 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -93,8 +93,7 @@ void pci_update_resource(struct pci_dev *dev, int resno)
 int pci_claim_resource(struct pci_dev *dev, int resource)
 {
 	struct resource *res = &dev->resource[resource];
-	struct resource *root;
-	int err;
+	struct resource *root, *conflict;
 
 	root = pci_find_parent_resource(dev, res);
 	if (!root) {
@@ -103,12 +102,15 @@ int pci_claim_resource(struct pci_dev *dev, int resource)
 		return -EINVAL;
 	}
 
-	err = request_resource(root, res);
-	if (err)
+	conflict = request_resource_conflict(root, res);
+	if (conflict) {
 		dev_err(&dev->dev,
-			"address space collision: %pR already in use\n", res);
+			"address space collision: %pR conflicts with %s %pR\n",
+			res, conflict->name, conflict);
+		return -EBUSY;
+	}
 
-	return err;
+	return 0;
 }
 EXPORT_SYMBOL(pci_claim_resource);
 
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 8c02b6c53bdb..f75a44d37fbe 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -29,7 +29,7 @@ static ssize_t pci_slot_attr_store(struct kobject *kobj,
 	return attribute->store ? attribute->store(slot, buf, len) : -EIO;
 }
 
-static struct sysfs_ops pci_slot_sysfs_ops = {
+static const struct sysfs_ops pci_slot_sysfs_ops = {
 	.show = pci_slot_attr_show,
 	.store = pci_slot_attr_store,
 };
@@ -47,6 +47,55 @@ static ssize_t address_read_file(struct pci_slot *slot, char *buf)
 				slot->number);
 }
 
+/* these strings match up with the values in pci_bus_speed */
+static char *pci_bus_speed_strings[] = {
+	"33 MHz PCI",		/* 0x00 */
+	"66 MHz PCI",		/* 0x01 */
+	"66 MHz PCI-X", 	/* 0x02 */
+	"100 MHz PCI-X",	/* 0x03 */
+	"133 MHz PCI-X",	/* 0x04 */
+	NULL,			/* 0x05 */
+	NULL,			/* 0x06 */
+	NULL,			/* 0x07 */
+	NULL,			/* 0x08 */
+	"66 MHz PCI-X 266",	/* 0x09 */
+	"100 MHz PCI-X 266",	/* 0x0a */
+	"133 MHz PCI-X 266",	/* 0x0b */
+	"Unknown AGP",		/* 0x0c */
+	"1x AGP",		/* 0x0d */
+	"2x AGP",		/* 0x0e */
+	"4x AGP",		/* 0x0f */
+	"8x AGP",		/* 0x10 */
+	"66 MHz PCI-X 533",	/* 0x11 */
+	"100 MHz PCI-X 533",	/* 0x12 */
+	"133 MHz PCI-X 533",	/* 0x13 */
+	"2.5 GT/s PCIe",	/* 0x14 */
+	"5.0 GT/s PCIe",	/* 0x15 */
+	"8.0 GT/s PCIe",	/* 0x16 */
+};
+
+static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
+{
+	const char *speed_string;
+
+	if (speed < ARRAY_SIZE(pci_bus_speed_strings))
+		speed_string = pci_bus_speed_strings[speed];
+	else
+		speed_string = "Unknown";
+
+	return sprintf(buf, "%s\n", speed_string);
+}
+
+static ssize_t max_speed_read_file(struct pci_slot *slot, char *buf)
+{
+	return bus_speed_read(slot->bus->max_bus_speed, buf);
+}
+
+static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf)
+{
+	return bus_speed_read(slot->bus->cur_bus_speed, buf);
+}
+
 static void pci_slot_release(struct kobject *kobj)
 {
 	struct pci_dev *dev;
@@ -66,9 +115,15 @@ static void pci_slot_release(struct kobject *kobj)
 
 static struct pci_slot_attribute pci_slot_attr_address =
 	__ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_max_speed =
+	__ATTR(max_bus_speed, (S_IFREG | S_IRUGO), max_speed_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_cur_speed =
+	__ATTR(cur_bus_speed, (S_IFREG | S_IRUGO), cur_speed_read_file, NULL);
 
 static struct attribute *pci_slot_default_attrs[] = {
 	&pci_slot_attr_address.attr,
+	&pci_slot_attr_max_speed.attr,
+	&pci_slot_attr_cur_speed.attr,
 	NULL,
 };
 
diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
new file mode 100644
index 000000000000..a5a5ca17cfe6
--- /dev/null
+++ b/drivers/pci/vpd.c
@@ -0,0 +1,61 @@
+/*
+ * File:	vpd.c
+ * Purpose:	Provide PCI VPD support
+ *
+ * Copyright (C) 2010 Broadcom Corporation.
+ */
+
+#include <linux/pci.h>
+
+int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt)
+{
+	int i;
+
+	for (i = off; i < len; ) {
+		u8 val = buf[i];
+
+		if (val & PCI_VPD_LRDT) {
+			/* Don't return success of the tag isn't complete */
+			if (i + PCI_VPD_LRDT_TAG_SIZE > len)
+				break;
+
+			if (val == rdt)
+				return i;
+
+			i += PCI_VPD_LRDT_TAG_SIZE +
+			     pci_vpd_lrdt_size(&buf[i]);
+		} else {
+			u8 tag = val & ~PCI_VPD_SRDT_LEN_MASK;
+
+			if (tag == rdt)
+				return i;
+
+			if (tag == PCI_VPD_SRDT_END)
+				break;
+
+			i += PCI_VPD_SRDT_TAG_SIZE +
+			     pci_vpd_srdt_size(&buf[i]);
+		}
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(pci_vpd_find_tag);
+
+int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
+			      unsigned int len, const char *kw)
+{
+	int i;
+
+	for (i = off; i + PCI_VPD_INFO_FLD_HDR_SIZE <= off + len;) {
+		if (buf[i + 0] == kw[0] &&
+		    buf[i + 1] == kw[1])
+			return i;
+
+		i += PCI_VPD_INFO_FLD_HDR_SIZE +
+		     pci_vpd_info_field_size(&buf[i]);
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(pci_vpd_find_info_keyword);