summaryrefslogtreecommitdiffstats
path: root/drivers/pcmcia
diff options
context:
space:
mode:
authorArtem Bityutskiy <artem.bityutskiy@linux.intel.com>2013-03-11 18:05:13 +0200
committerDavid Woodhouse <David.Woodhouse@intel.com>2013-04-05 13:28:28 +0100
commit5950f0803ca9d396ab79b7fe6789351f96e1d8d5 (patch)
tree27780388d3df61452e9ff292d1ae73f27a06fe4d /drivers/pcmcia
parent78ce3ab1f4744986088b584a3d821abeb29e2735 (diff)
downloadlinux-5950f0803ca9d396ab79b7fe6789351f96e1d8d5.tar.gz
linux-5950f0803ca9d396ab79b7fe6789351f96e1d8d5.tar.bz2
linux-5950f0803ca9d396ab79b7fe6789351f96e1d8d5.zip
pcmcia: remove RPX board stuff
The RPX board is not supported by the kernel because CONFIG_RPXCLASSIC and CONFIG_RPXLITE symbols and not defined anywhere. Clean-up the m8xx_pcmcia driver a little bit. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: linux-pcmcia@lists.infradead.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Diffstat (limited to 'drivers/pcmcia')
-rw-r--r--drivers/pcmcia/m8xx_pcmcia.c81
1 files changed, 0 insertions, 81 deletions
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 9a12eadcf74c..18c0d8d1ddf7 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -68,12 +68,6 @@ MODULE_LICENSE("Dual MPL/GPL");
#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
-/* The RPX series use SLOT_B */
-#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
-#define CONFIG_PCMCIA_SLOT_B
-#define CONFIG_BD_IS_MHZ
-#endif
-
/* The ADS board use SLOT_A */
#ifdef CONFIG_ADS
#define CONFIG_PCMCIA_SLOT_A
@@ -253,81 +247,6 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev);
#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */
-/* ------------------------------------------------------------------------- */
-/* board specific stuff: */
-/* voltage_set(), hardware_enable() and hardware_disable() */
-/* ------------------------------------------------------------------------- */
-/* RPX Boards from Embedded Planet */
-
-#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
-
-/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
- * SYPCR is write once only, therefore must the slowest memory be faster
- * than the bus monitor or we will get a machine check due to the bus timeout.
- */
-
-#define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE"
-
-#undef PCMCIA_BMT_LIMIT
-#define PCMCIA_BMT_LIMIT (6*8)
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
- u32 reg = 0;
-
- switch (vcc) {
- case 0:
- break;
- case 33:
- reg |= BCSR1_PCVCTL4;
- break;
- case 50:
- reg |= BCSR1_PCVCTL5;
- break;
- default:
- return 1;
- }
-
- switch (vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if (vcc == vpp)
- reg |= BCSR1_PCVCTL6;
- else
- return 1;
- break;
- case 120:
- reg |= BCSR1_PCVCTL7;
- default:
- return 1;
- }
-
- if (!((vcc == 50) || (vcc == 0)))
- return 1;
-
- /* first, turn off all power */
-
- out_be32(((u32 *) RPX_CSR_ADDR),
- in_be32(((u32 *) RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 |
- BCSR1_PCVCTL5 |
- BCSR1_PCVCTL6 |
- BCSR1_PCVCTL7));
-
- /* enable new powersettings */
-
- out_be32(((u32 *) RPX_CSR_ADDR), in_be32(((u32 *) RPX_CSR_ADDR)) | reg);
-
- return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
-
-#endif /* CONFIG_RPXCLASSIC */
-
/* FADS Boards from Motorola */
#if defined(CONFIG_FADS)