diff options
author | Amelie Delaunay <amelie.delaunay@st.com> | 2018-03-02 15:56:25 +0100 |
---|---|---|
committer | Kishon Vijay Abraham I <kishon@ti.com> | 2018-03-16 16:53:00 +0530 |
commit | 94c358da3a0545205c6c6a50ae26141f1c73acfa (patch) | |
tree | 3e848396b197b016f134469847f160b8ccd909a4 /drivers/phy | |
parent | 194303d60b68a8038979560e5f4ca493bbb3cf37 (diff) | |
download | linux-94c358da3a0545205c6c6a50ae26141f1c73acfa.tar.gz linux-94c358da3a0545205c6c6a50ae26141f1c73acfa.tar.bz2 linux-94c358da3a0545205c6c6a50ae26141f1c73acfa.zip |
phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)
This patch adds phy transceiver driver for STM32 USB PHY Controller
(USBPHYC) that provides dual port High-Speed phy for OTG (single port)
and EHCI/OHCI host controller (two ports).
One port of the phy is shared between the two USB controllers through
a UTMI+ switch.
[fengguang.wu@intel.com: Make stm32_usbphyc_get_pll_params() to be static]
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
-rw-r--r-- | drivers/phy/st/Kconfig | 14 | ||||
-rw-r--r-- | drivers/phy/st/Makefile | 1 | ||||
-rw-r--r-- | drivers/phy/st/phy-stm32-usbphyc.c | 461 |
3 files changed, 476 insertions, 0 deletions
diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig index 0814d3f87ec6..609719bdfa50 100644 --- a/drivers/phy/st/Kconfig +++ b/drivers/phy/st/Kconfig @@ -31,3 +31,17 @@ config PHY_STIH407_USB help Enable this support to enable the picoPHY device used by USB2 and USB3 controllers on STMicroelectronics STiH407 SoC families. + +config PHY_STM32_USBPHYC + tristate "STMicroelectronics STM32 USB HS PHY Controller driver" + depends on ARCH_STM32 || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support the High-Speed USB transceivers that are part + of some STMicroelectronics STM32 SoCs. + + This driver controls the entire USB PHY block: the USB PHY controller + (USBPHYC) and the two 8-bit wide UTMI+ interfaces. First interface is + used by an HS USB Host controller, and the second one is shared + between an HS USB OTG controller and an HS USB Host controller, + selected by a USB switch. diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile index e2adfe2166d2..c0091ad1fd48 100644 --- a/drivers/phy/st/Makefile +++ b/drivers/phy/st/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o +obj-$(CONFIG_PHY_STM32_USBPHYC) += phy-stm32-usbphyc.o diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c new file mode 100644 index 000000000000..bc4e78a19c91 --- /dev/null +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -0,0 +1,461 @@ +// SPDX-Licence-Identifier: GPL-2.0 +/* + * STMicroelectronics STM32 USB PHY Controller driver + * + * Copyright (C) 2018 STMicroelectronics + * Author(s): Amelie Delaunay <amelie.delaunay@st.com>. + */ +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/reset.h> + +#define STM32_USBPHYC_PLL 0x0 +#define STM32_USBPHYC_MISC 0x8 +#define STM32_USBPHYC_VERSION 0x3F4 + +/* STM32_USBPHYC_PLL bit fields */ +#define PLLNDIV GENMASK(6, 0) +#define PLLFRACIN GENMASK(25, 10) +#define PLLEN BIT(26) +#define PLLSTRB BIT(27) +#define PLLSTRBYP BIT(28) +#define PLLFRACCTL BIT(29) +#define PLLDITHEN0 BIT(30) +#define PLLDITHEN1 BIT(31) + +/* STM32_USBPHYC_MISC bit fields */ +#define SWITHOST BIT(0) + +/* STM32_USBPHYC_VERSION bit fields */ +#define MINREV GENMASK(3, 0) +#define MAJREV GENMASK(7, 4) + +static const char * const supplies_names[] = { + "vdda1v1", /* 1V1 */ + "vdda1v8", /* 1V8 */ +}; + +#define NUM_SUPPLIES ARRAY_SIZE(supplies_names) + +#define PLL_LOCK_TIME_US 100 +#define PLL_PWR_DOWN_TIME_US 5 +#define PLL_FVCO_MHZ 2880 +#define PLL_INFF_MIN_RATE_HZ 19200000 +#define PLL_INFF_MAX_RATE_HZ 38400000 +#define HZ_PER_MHZ 1000000L + +struct pll_params { + u8 ndiv; + u16 frac; +}; + +struct stm32_usbphyc_phy { + struct phy *phy; + struct stm32_usbphyc *usbphyc; + struct regulator_bulk_data supplies[NUM_SUPPLIES]; + u32 index; + bool active; +}; + +struct stm32_usbphyc { + struct device *dev; + void __iomem *base; + struct clk *clk; + struct reset_control *rst; + struct stm32_usbphyc_phy **phys; + int nphys; + int switch_setup; + bool pll_enabled; +}; + +static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits) +{ + writel_relaxed(readl_relaxed(reg) | bits, reg); +} + +static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) +{ + writel_relaxed(readl_relaxed(reg) & ~bits, reg); +} + +static void stm32_usbphyc_get_pll_params(u32 clk_rate, struct pll_params *pll_params) +{ + unsigned long long fvco, ndiv, frac; + + /* _ + * | FVCO = INFF*2*(NDIV + FRACT/2^16) when DITHER_DISABLE[1] = 1 + * | FVCO = 2880MHz + * < + * | NDIV = integer part of input bits to set the LDF + * |_FRACT = fractional part of input bits to set the LDF + * => PLLNDIV = integer part of (FVCO / (INFF*2)) + * => PLLFRACIN = fractional part of(FVCO / INFF*2) * 2^16 + * <=> PLLFRACIN = ((FVCO / (INFF*2)) - PLLNDIV) * 2^16 + */ + fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ; + + ndiv = fvco; + do_div(ndiv, (clk_rate * 2)); + pll_params->ndiv = (u8)ndiv; + + frac = fvco * (1 << 16); + do_div(frac, (clk_rate * 2)); + frac = frac - (ndiv * (1 << 16)); + pll_params->frac = (u16)frac; +} + +static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) +{ + struct pll_params pll_params; + u32 clk_rate = clk_get_rate(usbphyc->clk); + u32 ndiv, frac; + u32 usbphyc_pll; + + if ((clk_rate < PLL_INFF_MIN_RATE_HZ) || + (clk_rate > PLL_INFF_MAX_RATE_HZ)) { + dev_err(usbphyc->dev, "input clk freq (%dHz) out of range\n", + clk_rate); + return -EINVAL; + } + + stm32_usbphyc_get_pll_params(clk_rate, &pll_params); + ndiv = FIELD_PREP(PLLNDIV, pll_params.ndiv); + frac = FIELD_PREP(PLLFRACIN, pll_params.frac); + + usbphyc_pll = PLLDITHEN1 | PLLDITHEN0 | PLLSTRBYP | ndiv; + + if (pll_params.frac) + usbphyc_pll |= PLLFRACCTL | frac; + + writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL); + + dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n", + clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll), + FIELD_GET(PLLFRACIN, usbphyc_pll)); + + return 0; +} + +static bool stm32_usbphyc_has_one_phy_active(struct stm32_usbphyc *usbphyc) +{ + int i; + + for (i = 0; i < usbphyc->nphys; i++) + if (usbphyc->phys[i]->active) + return true; + + return false; +} + +static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) +{ + void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; + bool pllen = (readl_relaxed(pll_reg) & PLLEN); + int ret; + + /* Check if one phy port has already configured the pll */ + if (pllen && stm32_usbphyc_has_one_phy_active(usbphyc)) + return 0; + + if (pllen) { + stm32_usbphyc_clr_bits(pll_reg, PLLEN); + /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ + udelay(PLL_PWR_DOWN_TIME_US); + } + + ret = stm32_usbphyc_pll_init(usbphyc); + if (ret) + return ret; + + stm32_usbphyc_set_bits(pll_reg, PLLEN); + + /* Wait for maximum lock time */ + udelay(PLL_LOCK_TIME_US); + + if (!(readl_relaxed(pll_reg) & PLLEN)) { + dev_err(usbphyc->dev, "PLLEN not set\n"); + return -EIO; + } + + return 0; +} + +static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) +{ + void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; + + /* Check if other phy port active */ + if (stm32_usbphyc_has_one_phy_active(usbphyc)) + return 0; + + stm32_usbphyc_clr_bits(pll_reg, PLLEN); + /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ + udelay(PLL_PWR_DOWN_TIME_US); + + if (readl_relaxed(pll_reg) & PLLEN) { + dev_err(usbphyc->dev, "PLL not reset\n"); + return -EIO; + } + + return 0; +} + +static int stm32_usbphyc_phy_init(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; + int ret; + + ret = stm32_usbphyc_pll_enable(usbphyc); + if (ret) + return ret; + + usbphyc_phy->active = true; + + return 0; +} + +static int stm32_usbphyc_phy_exit(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; + + usbphyc_phy->active = false; + + return stm32_usbphyc_pll_disable(usbphyc); +} + +static int stm32_usbphyc_phy_power_on(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + + return regulator_bulk_enable(NUM_SUPPLIES, usbphyc_phy->supplies); +} + +static int stm32_usbphyc_phy_power_off(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + + return regulator_bulk_disable(NUM_SUPPLIES, usbphyc_phy->supplies); +} + +static const struct phy_ops stm32_usbphyc_phy_ops = { + .init = stm32_usbphyc_phy_init, + .exit = stm32_usbphyc_phy_exit, + .power_on = stm32_usbphyc_phy_power_on, + .power_off = stm32_usbphyc_phy_power_off, + .owner = THIS_MODULE, +}; + +static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc, + u32 utmi_switch) +{ + if (!utmi_switch) + stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_MISC, + SWITHOST); + else + stm32_usbphyc_set_bits(usbphyc->base + STM32_USBPHYC_MISC, + SWITHOST); + usbphyc->switch_setup = utmi_switch; +} + +static struct phy *stm32_usbphyc_of_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); + struct stm32_usbphyc_phy *usbphyc_phy = NULL; + struct device_node *phynode = args->np; + + int port = 0; + + for (port = 0; port < usbphyc->nphys; port++) { + if (phynode == usbphyc->phys[port]->phy->dev.of_node) { + usbphyc_phy = usbphyc->phys[port]; + break; + } + } + if (!usbphyc_phy) { + dev_err(dev, "failed to find phy\n"); + return ERR_PTR(-EINVAL); + } + + if (((usbphyc_phy->index == 0) && (args->args_count != 0)) || + ((usbphyc_phy->index == 1) && (args->args_count != 1))) { + dev_err(dev, "invalid number of cells for phy port%d\n", + usbphyc_phy->index); + return ERR_PTR(-EINVAL); + } + + /* Configure the UTMI switch for PHY port#2 */ + if (usbphyc_phy->index == 1) { + if (usbphyc->switch_setup < 0) { + stm32_usbphyc_switch_setup(usbphyc, args->args[0]); + } else { + if (args->args[0] != usbphyc->switch_setup) { + dev_err(dev, "phy port1 already used\n"); + return ERR_PTR(-EBUSY); + } + } + } + + return usbphyc_phy->phy; +} + +static int stm32_usbphyc_probe(struct platform_device *pdev) +{ + struct stm32_usbphyc *usbphyc; + struct device *dev = &pdev->dev; + struct device_node *child, *np = dev->of_node; + struct resource *res; + struct phy_provider *phy_provider; + u32 version; + int ret, port = 0; + + usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL); + if (!usbphyc) + return -ENOMEM; + usbphyc->dev = dev; + dev_set_drvdata(dev, usbphyc); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + usbphyc->base = devm_ioremap_resource(dev, res); + if (IS_ERR(usbphyc->base)) + return PTR_ERR(usbphyc->base); + + usbphyc->clk = devm_clk_get(dev, 0); + if (IS_ERR(usbphyc->clk)) { + ret = PTR_ERR(usbphyc->clk); + dev_err(dev, "clk get failed: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(usbphyc->clk); + if (ret) { + dev_err(dev, "clk enable failed: %d\n", ret); + return ret; + } + + usbphyc->rst = devm_reset_control_get(dev, 0); + if (!IS_ERR(usbphyc->rst)) { + reset_control_assert(usbphyc->rst); + udelay(2); + reset_control_deassert(usbphyc->rst); + } + + usbphyc->switch_setup = -EINVAL; + usbphyc->nphys = of_get_child_count(np); + usbphyc->phys = devm_kcalloc(dev, usbphyc->nphys, + sizeof(*usbphyc->phys), GFP_KERNEL); + if (!usbphyc->phys) { + ret = -ENOMEM; + goto clk_disable; + } + + for_each_child_of_node(np, child) { + struct stm32_usbphyc_phy *usbphyc_phy; + struct phy *phy; + u32 index; + int i; + + phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, + "failed to create phy%d: %d\n", i, ret); + goto put_child; + } + + usbphyc_phy = devm_kzalloc(dev, sizeof(*usbphyc_phy), + GFP_KERNEL); + if (!usbphyc_phy) { + ret = -ENOMEM; + goto put_child; + } + + for (i = 0; i < NUM_SUPPLIES; i++) + usbphyc_phy->supplies[i].supply = supplies_names[i]; + + ret = devm_regulator_bulk_get(&phy->dev, NUM_SUPPLIES, + usbphyc_phy->supplies); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&phy->dev, + "failed to get regulators: %d\n", ret); + goto put_child; + } + + ret = of_property_read_u32(child, "reg", &index); + if (ret || index > usbphyc->nphys) { + dev_err(&phy->dev, "invalid reg property: %d\n", ret); + goto put_child; + } + + usbphyc->phys[port] = usbphyc_phy; + phy_set_bus_width(phy, 8); + phy_set_drvdata(phy, usbphyc_phy); + + usbphyc->phys[port]->phy = phy; + usbphyc->phys[port]->usbphyc = usbphyc; + usbphyc->phys[port]->index = index; + usbphyc->phys[port]->active = false; + + port++; + } + + phy_provider = devm_of_phy_provider_register(dev, + stm32_usbphyc_of_xlate); + if (IS_ERR(phy_provider)) { + ret = PTR_ERR(phy_provider); + dev_err(dev, "failed to register phy provider: %d\n", ret); + goto clk_disable; + } + + version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION); + dev_info(dev, "registered rev:%lu.%lu\n", + FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); + + return 0; + +put_child: + of_node_put(child); +clk_disable: + clk_disable_unprepare(usbphyc->clk); + + return ret; +} + +static int stm32_usbphyc_remove(struct platform_device *pdev) +{ + struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev); + + clk_disable_unprepare(usbphyc->clk); + + return 0; +} + +static const struct of_device_id stm32_usbphyc_of_match[] = { + { .compatible = "st,stm32mp1-usbphyc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match); + +static struct platform_driver stm32_usbphyc_driver = { + .probe = stm32_usbphyc_probe, + .remove = stm32_usbphyc_remove, + .driver = { + .of_match_table = stm32_usbphyc_of_match, + .name = "stm32-usbphyc", + } +}; +module_platform_driver(stm32_usbphyc_driver); + +MODULE_DESCRIPTION("STMicroelectronics STM32 USBPHYC driver"); +MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); +MODULE_LICENSE("GPL v2"); |