diff options
author | Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> | 2019-08-06 17:51:19 +0900 |
---|---|---|
committer | Kishon Vijay Abraham I <kishon@ti.com> | 2019-08-26 17:20:02 +0530 |
commit | e6839c31a608e79f2057fab987dd814f5d3477e6 (patch) | |
tree | 89bbdf865c427934e95c9bcc83e988337c3a7923 /drivers/phy | |
parent | 3e644828421e31167bedd8dc4d291cdcc822ab20 (diff) | |
download | linux-e6839c31a608e79f2057fab987dd814f5d3477e6.tar.gz linux-e6839c31a608e79f2057fab987dd814f5d3477e6.tar.bz2 linux-e6839c31a608e79f2057fab987dd814f5d3477e6.zip |
phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current
The hardware manual should be revised, but the initial value of
VBCTRL.OCCLREN is set to 1 actually. If the bit is set, the hardware
clears VBCTRL.VBOUT and ADPCTRL.DRVVBUS registers automatically
when the hardware detects over-current signal from a USB power switch.
However, since the hardware doesn't have any registers which
indicates over-current, the driver cannot handle it at all. So, if
"is_otg_channel" hardware detects over-current, since ADPCTRL.DRVVBUS
register is cleared automatically, the channel cannot be used after
that.
To resolve this behavior, this patch sets the VBCTRL.OCCLREN to 0
to keep ADPCTRL.DRVVBUS even if the "is_otg_channel" hardware
detects over-current. (We assume a USB power switch itself protects
over-current and turns the VBUS off.)
This patch is inspired by a BSP patch from Kazuya Mizuguchi.
Fixes: 1114e2d31731 ("phy: rcar-gen3-usb2: change the mode to OTG on the combined channel")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
-rw-r--r-- | drivers/phy/renesas/phy-rcar-gen3-usb2.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 8ffba67568ec..b7f6b1324395 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -61,6 +61,7 @@ USB2_OBINT_IDDIGCHG) /* VBCTRL */ +#define USB2_VBCTRL_OCCLREN BIT(16) #define USB2_VBCTRL_DRVVBUSSEL BIT(8) /* LINECTRL1 */ @@ -374,6 +375,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) writel(val, usb2_base + USB2_LINECTRL1); val = readl(usb2_base + USB2_VBCTRL); + val &= ~USB2_VBCTRL_OCCLREN; writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL); val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); |