summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/qcom
diff options
context:
space:
mode:
authorBjorn Andersson <bjorn.andersson@sonymobile.com>2015-06-17 23:47:28 -0700
committerLinus Walleij <linus.walleij@linaro.org>2015-07-16 09:39:04 +0200
commit0e948042c4203b97e44370993ef042c945308282 (patch)
tree1850fc95e13f348a162eb1757045bfc54618d253 /drivers/pinctrl/qcom
parenteaaf5dd46457c4fa3a9e2d1be775821d4e72773c (diff)
downloadlinux-0e948042c4203b97e44370993ef042c945308282.tar.gz
linux-0e948042c4203b97e44370993ef042c945308282.tar.bz2
linux-0e948042c4203b97e44370993ef042c945308282.zip
pinctrl: qcom: spmi-mpp: Implement support for sink mode
The MPP supports three modes; digital, analog and sink mode. This patch implements support for the latter. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/qcom')
-rw-r--r--drivers/pinctrl/qcom/pinctrl-spmi-mpp.c115
1 files changed, 71 insertions, 44 deletions
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 745c37dea7d0..9dde023640ba 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -62,6 +62,7 @@
#define PMIC_MPP_REG_DIG_IN_CTL 0x43
#define PMIC_MPP_REG_EN_CTL 0x46
#define PMIC_MPP_REG_AIN_CTL 0x4a
+#define PMIC_MPP_REG_SINK_CTL 0x4c
/* PMIC_MPP_REG_MODE_CTL */
#define PMIC_MPP_REG_MODE_VALUE_MASK 0x1
@@ -98,6 +99,7 @@
/* Qualcomm specific pin configurations */
#define PMIC_MPP_CONF_AMUX_ROUTE (PIN_CONFIG_END + 1)
#define PMIC_MPP_CONF_ANALOG_MODE (PIN_CONFIG_END + 2)
+#define PMIC_MPP_CONF_SINK_MODE (PIN_CONFIG_END + 3)
/**
* struct pmic_mpp_pad - keep current MPP settings
@@ -109,11 +111,13 @@
* @input_enabled: Set to true if MPP input buffer logic is enabled.
* @analog_mode: Set to true when MPP should operate in Analog Input, Analog
* Output or Bidirectional Analog mode.
+ * @sink_mode: Boolean indicating if ink mode is slected
* @num_sources: Number of power-sources supported by this MPP.
* @power_source: Current power-source used.
* @amux_input: Set the source for analog input.
* @pullup: Pullup resistor value. Valid in Bidirectional mode only.
* @function: See pmic_mpp_functions[].
+ * @drive_strength: Amount of current in sink mode
*/
struct pmic_mpp_pad {
u16 base;
@@ -123,11 +127,13 @@ struct pmic_mpp_pad {
bool output_enabled;
bool input_enabled;
bool analog_mode;
+ bool sink_mode;
unsigned int num_sources;
unsigned int power_source;
unsigned int amux_input;
unsigned int pullup;
unsigned int function;
+ unsigned int drive_strength;
};
struct pmic_mpp_state {
@@ -140,12 +146,14 @@ struct pmic_mpp_state {
static const struct pinconf_generic_params pmic_mpp_bindings[] = {
{"qcom,amux-route", PMIC_MPP_CONF_AMUX_ROUTE, 0},
{"qcom,analog-mode", PMIC_MPP_CONF_ANALOG_MODE, 0},
+ {"qcom,sink-mode", PMIC_MPP_CONF_SINK_MODE, 0},
};
#ifdef CONFIG_DEBUG_FS
static const struct pin_config_item pmic_conf_items[] = {
PCONFDUMP(PMIC_MPP_CONF_AMUX_ROUTE, "analog mux", NULL, true),
PCONFDUMP(PMIC_MPP_CONF_ANALOG_MODE, "analog output", NULL, false),
+ PCONFDUMP(PMIC_MPP_CONF_SINK_MODE, "sink mode", NULL, false),
};
#endif
@@ -243,33 +251,28 @@ static int pmic_mpp_get_function_groups(struct pinctrl_dev *pctldev,
return 0;
}
-static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function,
- unsigned pin)
+static int pmic_mpp_write_mode_ctl(struct pmic_mpp_state *state,
+ struct pmic_mpp_pad *pad)
{
- struct pmic_mpp_state *state = pinctrl_dev_get_drvdata(pctldev);
- struct pmic_mpp_pad *pad;
unsigned int val;
- int ret;
-
- pad = pctldev->desc->pins[pin].drv_data;
-
- pad->function = function;
- if (!pad->analog_mode) {
- val = PMIC_MPP_MODE_DIGITAL_INPUT;
+ if (pad->analog_mode) {
+ val = PMIC_MPP_MODE_ANALOG_INPUT;
if (pad->output_enabled) {
if (pad->input_enabled)
- val = PMIC_MPP_MODE_DIGITAL_BIDIR;
+ val = PMIC_MPP_MODE_ANALOG_BIDIR;
else
- val = PMIC_MPP_MODE_DIGITAL_OUTPUT;
+ val = PMIC_MPP_MODE_ANALOG_OUTPUT;
}
+ } else if (pad->sink_mode) {
+ val = PMIC_MPP_MODE_CURRENT_SINK;
} else {
- val = PMIC_MPP_MODE_ANALOG_INPUT;
+ val = PMIC_MPP_MODE_DIGITAL_INPUT;
if (pad->output_enabled) {
if (pad->input_enabled)
- val = PMIC_MPP_MODE_ANALOG_BIDIR;
+ val = PMIC_MPP_MODE_DIGITAL_BIDIR;
else
- val = PMIC_MPP_MODE_ANALOG_OUTPUT;
+ val = PMIC_MPP_MODE_DIGITAL_OUTPUT;
}
}
@@ -277,9 +280,22 @@ static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function,
val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK;
- ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val);
- if (ret < 0)
- return ret;
+ return pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val);
+}
+
+static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function,
+ unsigned pin)
+{
+ struct pmic_mpp_state *state = pinctrl_dev_get_drvdata(pctldev);
+ struct pmic_mpp_pad *pad;
+ unsigned int val;
+ int ret;
+
+ pad = pctldev->desc->pins[pin].drv_data;
+
+ pad->function = function;
+
+ ret = pmic_mpp_write_mode_ctl(state, pad);
val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT;
@@ -339,9 +355,15 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
case PMIC_MPP_CONF_AMUX_ROUTE:
arg = pad->amux_input;
break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ arg = pad->drive_strength;
+ break;
case PMIC_MPP_CONF_ANALOG_MODE:
arg = pad->analog_mode;
break;
+ case PMIC_MPP_CONF_SINK_MODE:
+ arg = pad->sink_mode;
+ break;
default:
return -EINVAL;
}
@@ -403,13 +425,19 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
pad->output_enabled = true;
pad->out_value = arg;
break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ arg = pad->drive_strength;
+ break;
case PMIC_MPP_CONF_AMUX_ROUTE:
if (arg >= PMIC_MPP_AMUX_ROUTE_ABUS4)
return -EINVAL;
pad->amux_input = arg;
break;
case PMIC_MPP_CONF_ANALOG_MODE:
- pad->analog_mode = true;
+ pad->analog_mode = !!arg;
+ break;
+ case PMIC_MPP_CONF_SINK_MODE:
+ pad->sink_mode = !!arg;
break;
default:
return -EINVAL;
@@ -434,29 +462,7 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
if (ret < 0)
return ret;
- if (!pad->analog_mode) {
- val = 0; /* just digital input */
- if (pad->output_enabled) {
- if (pad->input_enabled)
- val = 2; /* digital input and output */
- else
- val = 1; /* just digital output */
- }
- } else {
- val = 4; /* just analog input */
- if (pad->output_enabled) {
- if (pad->input_enabled)
- val = 3; /* analog input and output */
- else
- val = 5; /* just analog output */
- }
- }
-
- val = val << PMIC_MPP_REG_MODE_DIR_SHIFT;
- val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
- val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK;
-
- ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val);
+ ret = pmic_mpp_write_mode_ctl(state, pad);
if (ret < 0)
return ret;
@@ -476,6 +482,9 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev,
"0.6kOhm", "10kOhm", "30kOhm", "Disabled"
};
+ static const char *const modes[] = {
+ "digital", "analog", "sink"
+ };
pad = pctldev->desc->pins[pin].drv_data;
@@ -495,7 +504,7 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev,
}
seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in");
- seq_printf(s, " %-4s", pad->analog_mode ? "ana" : "dig");
+ seq_printf(s, " %-7s", modes[pad->analog_mode ? 1 : (pad->sink_mode ? 2 : 0)]);
seq_printf(s, " %-7s", pmic_mpp_functions[pad->function]);
seq_printf(s, " vin-%d", pad->power_source);
seq_printf(s, " %-8s", biases[pad->pullup]);
@@ -666,31 +675,43 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state,
pad->input_enabled = true;
pad->output_enabled = false;
pad->analog_mode = false;
+ pad->sink_mode = false;
break;
case PMIC_MPP_MODE_DIGITAL_OUTPUT:
pad->input_enabled = false;
pad->output_enabled = true;
pad->analog_mode = false;
+ pad->sink_mode = false;
break;
case PMIC_MPP_MODE_DIGITAL_BIDIR:
pad->input_enabled = true;
pad->output_enabled = true;
pad->analog_mode = false;
+ pad->sink_mode = false;
break;
case PMIC_MPP_MODE_ANALOG_BIDIR:
pad->input_enabled = true;
pad->output_enabled = true;
pad->analog_mode = true;
+ pad->sink_mode = false;
break;
case PMIC_MPP_MODE_ANALOG_INPUT:
pad->input_enabled = true;
pad->output_enabled = false;
pad->analog_mode = true;
+ pad->sink_mode = false;
break;
case PMIC_MPP_MODE_ANALOG_OUTPUT:
pad->input_enabled = false;
pad->output_enabled = true;
pad->analog_mode = true;
+ pad->sink_mode = false;
+ break;
+ case PMIC_MPP_MODE_CURRENT_SINK:
+ pad->input_enabled = false;
+ pad->output_enabled = true;
+ pad->analog_mode = false;
+ pad->sink_mode = true;
break;
default:
dev_err(state->dev, "unknown MPP direction\n");
@@ -721,6 +742,12 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state,
pad->amux_input = val >> PMIC_MPP_REG_AIN_ROUTE_SHIFT;
pad->amux_input &= PMIC_MPP_REG_AIN_ROUTE_MASK;
+ val = pmic_mpp_read(state, pad, PMIC_MPP_REG_SINK_CTL);
+ if (val < 0)
+ return val;
+
+ pad->drive_strength = val;
+
val = pmic_mpp_read(state, pad, PMIC_MPP_REG_EN_CTL);
if (val < 0)
return val;