summaryrefslogtreecommitdiffstats
path: root/drivers/power
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-06-02 16:15:12 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-06-02 16:15:12 -0700
commit825f4e0271b0de3f7f31d963dcdaa0056fe9b73a (patch)
treeaef1f198da011a96fefbe9851137ca17afd929a4 /drivers/power
parent0a58471541cc823ef8056d23945c39fec154481c (diff)
parentb5b9324a6296bd0176fe1f8e06a1220207bd1bd3 (diff)
downloadlinux-825f4e0271b0de3f7f31d963dcdaa0056fe9b73a.tar.gz
linux-825f4e0271b0de3f7f31d963dcdaa0056fe9b73a.tar.bz2
linux-825f4e0271b0de3f7f31d963dcdaa0056fe9b73a.zip
Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull part one of ARM SoC updates from Olof Johansson: "A quite large set of SoC updates this cycle. In no particular order: - Multi-cluster power management for Samsung Exynos, adding support for big.LITTLE CPU switching on EXYNOS5 - SMP support for Marvell Armada 375 and 38x - SMP rework on Allwinner A31 - Xilinx Zynq support for SOC_BUS, big endian - Marvell orion5x platform cleanup, modernizing the implementation and moving to DT. - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so that their platform can be enabled in the same kernel binary as most of the other v7 platforms in the tree. \o/ The work isn't quite complete, there's some driver fixes still needed, but the basics now work. New SoC support added: - Freescale i.MX6SX - LSI Axxia AXM55xx SoCs - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800 - STi STIH407 plus a large set of various smaller updates for different platforms. I'm probably missing some important one here" * tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits) ARM: exynos: don't run exynos4 l2x0 setup on other platforms ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug ARM: EXYNOS: mcpm rename the power_down_finish ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC clk: exynos5410: register clocks using common clock framework ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084 ARM: sunxi: allow building without reset controller Documentation: devicetree: arm: sort enable-method entries ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks ARM: dts: axxia: Add reset controller power: reset: Add Axxia system reset driver ARM: axxia: Adding defconfig for AXM55xx ...
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/reset/Kconfig8
-rw-r--r--drivers/power/reset/Makefile1
-rw-r--r--drivers/power/reset/axxia-reset.c88
3 files changed, 97 insertions, 0 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index fa0e4e057b99..49b46e6ca959 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -12,6 +12,14 @@ config POWER_RESET_AS3722
help
This driver supports turning off board via a ams AS3722 power-off.
+config POWER_RESET_AXXIA
+ bool "LSI Axxia reset driver"
+ depends on POWER_RESET && ARCH_AXXIA
+ help
+ This driver supports restart for Axxia SoC.
+
+ Say Y if you have an Axxia family SoC.
+
config POWER_RESET_GPIO
bool "GPIO power-off driver"
depends on OF_GPIO && POWER_RESET
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index a5b4a77d1a41..16c0516e5a19 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
+obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
diff --git a/drivers/power/reset/axxia-reset.c b/drivers/power/reset/axxia-reset.c
new file mode 100644
index 000000000000..3b1f8d601784
--- /dev/null
+++ b/drivers/power/reset/axxia-reset.c
@@ -0,0 +1,88 @@
+/*
+ * Reset driver for Axxia devices
+ *
+ * Copyright (C) 2014 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#include <asm/system_misc.h>
+
+
+#define SC_CRIT_WRITE_KEY 0x1000
+#define SC_LATCH_ON_RESET 0x1004
+#define SC_RESET_CONTROL 0x1008
+#define RSTCTL_RST_ZERO (1<<3)
+#define RSTCTL_RST_FAB (1<<2)
+#define RSTCTL_RST_CHIP (1<<1)
+#define RSTCTL_RST_SYS (1<<0)
+#define SC_EFUSE_INT_STATUS 0x180c
+#define EFUSE_READ_DONE (1<<31)
+
+static struct regmap *syscon;
+
+static void do_axxia_restart(enum reboot_mode reboot_mode, const char *cmd)
+{
+ /* Access Key (0xab) */
+ regmap_write(syscon, SC_CRIT_WRITE_KEY, 0xab);
+ /* Select internal boot from 0xffff0000 */
+ regmap_write(syscon, SC_LATCH_ON_RESET, 0x00000040);
+ /* Assert ResetReadDone (to avoid hanging in boot ROM) */
+ regmap_write(syscon, SC_EFUSE_INT_STATUS, EFUSE_READ_DONE);
+ /* Assert chip reset */
+ regmap_update_bits(syscon, SC_RESET_CONTROL,
+ RSTCTL_RST_CHIP, RSTCTL_RST_CHIP);
+}
+
+static int axxia_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ syscon = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
+ if (IS_ERR(syscon)) {
+ pr_err("%s: syscon lookup failed\n", dev->of_node->name);
+ return PTR_ERR(syscon);
+ }
+
+ arm_pm_restart = do_axxia_restart;
+
+ return 0;
+}
+
+static const struct of_device_id of_axxia_reset_match[] = {
+ { .compatible = "lsi,axm55xx-reset", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_axxia_reset_match);
+
+static struct platform_driver axxia_reset_driver = {
+ .probe = axxia_reset_probe,
+ .driver = {
+ .name = "axxia-reset",
+ .of_match_table = of_match_ptr(of_axxia_reset_match),
+ },
+};
+
+static int __init axxia_reset_init(void)
+{
+ return platform_driver_register(&axxia_reset_driver);
+}
+device_initcall(axxia_reset_init);