diff options
| author | Afzal Mohammed <afzal@ti.com> | 2011-11-08 18:54:10 +0530 |
|---|---|---|
| committer | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2011-11-23 14:03:52 +0000 |
| commit | 780dc9ba4eb682a89be48d5b814feae6722a19e0 (patch) | |
| tree | 5ddac04630d0bcaf0405c4f5f08793ca68c3439c /drivers/regulator | |
| parent | cfcfc9eca2bcbd26a8e206baeb005b055dbf8e37 (diff) | |
| download | linux-780dc9ba4eb682a89be48d5b814feae6722a19e0.tar.gz linux-780dc9ba4eb682a89be48d5b814feae6722a19e0.tar.bz2 linux-780dc9ba4eb682a89be48d5b814feae6722a19e0.zip | |
regulator: TPS65910: Fix VDD1/2 voltage selector count
Count of selector voltage is required for regulator_set_voltage
to work via set_voltage_sel. VDD1/2 currently have it as zero,
so regulator_set_voltage won't work for VDD1/2.
Update count (n_voltages) for VDD1/2.
Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain
With above expr, number of voltages that can be selected is
step value count * gain count
constant for gain count will be called VDD1_2_NUM_VOLT_COARSE
existing constant for step value count is VDD1_2_NUM_VOLTS,
use VDD1_2_NUM_VOLT_FINE instead to make clear that step value
is not the only component in deciding selectable voltage count
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/tps65910-regulator.c | 14 |
1 files changed, 8 insertions, 6 deletions
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 66d2d60b436a..b552aae55b41 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -664,10 +664,10 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, switch (id) { case TPS65910_REG_VDD1: - dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; + dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; if (dcdc_mult == 1) dcdc_mult--; - vsel = (selector % VDD1_2_NUM_VOLTS) + 3; + vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3; tps65910_modify_bits(pmic, TPS65910_VDD1, (dcdc_mult << VDD1_VGAIN_SEL_SHIFT), @@ -675,10 +675,10 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, tps65910_reg_write(pmic, TPS65910_VDD1_OP, vsel); break; case TPS65910_REG_VDD2: - dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; + dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; if (dcdc_mult == 1) dcdc_mult--; - vsel = (selector % VDD1_2_NUM_VOLTS) + 3; + vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3; tps65910_modify_bits(pmic, TPS65910_VDD2, (dcdc_mult << VDD2_VGAIN_SEL_SHIFT), @@ -756,9 +756,9 @@ static int tps65910_list_voltage_dcdc(struct regulator_dev *dev, switch (id) { case TPS65910_REG_VDD1: case TPS65910_REG_VDD2: - mult = (selector / VDD1_2_NUM_VOLTS) + 1; + mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1; volt = VDD1_2_MIN_VOLT + - (selector % VDD1_2_NUM_VOLTS) * VDD1_2_OFFSET; + (selector % VDD1_2_NUM_VOLT_FINE) * VDD1_2_OFFSET; break; case TPS65911_REG_VDDCTRL: volt = VDDCTRL_MIN_VOLT + (selector * VDDCTRL_OFFSET); @@ -947,6 +947,8 @@ static __devinit int tps65910_probe(struct platform_device *pdev) if (i == TPS65910_REG_VDD1 || i == TPS65910_REG_VDD2) { pmic->desc[i].ops = &tps65910_ops_dcdc; + pmic->desc[i].n_voltages = VDD1_2_NUM_VOLT_FINE * + VDD1_2_NUM_VOLT_COARSE; } else if (i == TPS65910_REG_VDD3) { if (tps65910_chip_id(tps65910) == TPS65910) pmic->desc[i].ops = &tps65910_ops_vdd3; |