Merge branch 'topic/error' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-fixed

40 files changed, 2704 insertions, 418 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 144cbf5b3e5a..936f7ccc9736 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -323,7 +323,7 @@ config REGULATOR_LP872X
 
 config REGULATOR_LP873X
 	tristate "TI LP873X Power regulators"
-	depends on MFD_LP873X && OF
+	depends on MFD_TI_LP873X && OF
 	help
 	  This driver supports LP873X voltage regulator chips. LP873X
 	  provides two step-down converters and two general-purpose LDO
@@ -353,6 +353,14 @@ config REGULATOR_LTC3589
 	  This enables support for the LTC3589, LTC3589-1, and LTC3589-2
 	  8-output regulators controlled via I2C.
 
+config REGULATOR_LTC3676
+	tristate "LTC3676 8-output voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This enables support for the LTC3676
+	  8-output regulators controlled via I2C.
+
 config REGULATOR_MAX14577
 	tristate "Maxim 14577/77836 regulator"
 	depends on MFD_MAX14577
@@ -498,6 +506,15 @@ config REGULATOR_MT6311
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6323
+	tristate "MediaTek MT6323 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6323 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6397
 	tristate "MediaTek MT6397 PMIC"
 	depends on MFD_MT6397
@@ -543,12 +560,12 @@ config REGULATOR_PCF50633
 	 on PCF50633
 
 config REGULATOR_PFUZE100
-	tristate "Freescale PFUZE100/PFUZE200 regulator driver"
+	tristate "Freescale PFUZE100/200/3000 regulator driver"
 	depends on I2C
 	select REGMAP_I2C
 	help
 	  Say y here to support the regulators found on the Freescale
-	  PFUZE100/PFUZE200 PMIC.
+	  PFUZE100/200/3000 PMIC.
 
 config REGULATOR_PV88060
 	tristate "Powerventure Semiconductor PV88060 regulator"
@@ -626,20 +643,21 @@ config REGULATOR_RC5T583
 	  outputs which can be controlled by i2c communication.
 
 config REGULATOR_RK808
-	tristate "Rockchip RK808 Power regulators"
+	tristate "Rockchip RK808/RK818 Power regulators"
 	depends on MFD_RK808
 	help
 	  Select this option to enable the power regulator of ROCKCHIP
-	  PMIC RK808.
+	  PMIC RK808 and RK818.
 	  This driver supports the control of different power rails of device
 	  through regulator interface. The device supports multiple DCDC/LDO
 	  outputs which can be controlled by i2c communication.
 
 config REGULATOR_RN5T618
-	tristate "Ricoh RN5T618 voltage regulators"
+	tristate "Ricoh RN5T567/618 voltage regulators"
 	depends on MFD_RN5T618
 	help
-	  Say y here to support the regulators found on Ricoh RN5T618 PMIC.
+	  Say y here to support the regulators found on Ricoh RN5T567 or
+	  RN5T618 PMIC.
 
 config REGULATOR_RT5033
 	tristate "Richtek RT5033 Regulators"
@@ -810,7 +828,7 @@ config REGULATOR_TPS65912
 	    This driver supports TPS65912 voltage regulator chip.
 
 config REGULATOR_TPS80031
-	tristate "TI TPS80031/TPS80032 power regualtor driver"
+	tristate "TI TPS80031/TPS80032 power regulator driver"
 	depends on MFD_TPS80031
 	help
 	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 85a1d44a3939..2142a5d3fc08 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
 obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
 obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
+obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
 obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
@@ -65,6 +66,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
+obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c
index 84c1ee39ddae..2ca00045eb99 100644
--- a/drivers/regulator/ab8500-ext.c
+++ b/drivers/regulator/ab8500-ext.c
@@ -25,6 +25,456 @@
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
 
+static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
+	/* Main display, u8500 R3 uib */
+	REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
+	/* Main display, u8500 uib and ST uib */
+	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
+	/* Secondary display, ST uib */
+	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
+	/* SFH7741 proximity sensor */
+	REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
+	/* BH1780GLS ambient light sensor */
+	REGULATOR_SUPPLY("vcc", "2-0029"),
+	/* lsm303dlh accelerometer */
+	REGULATOR_SUPPLY("vdd", "2-0018"),
+	/* lsm303dlhc accelerometer */
+	REGULATOR_SUPPLY("vdd", "2-0019"),
+	/* lsm303dlh magnetometer */
+	REGULATOR_SUPPLY("vdd", "2-001e"),
+	/* Rohm BU21013 Touchscreen devices */
+	REGULATOR_SUPPLY("avdd", "3-005c"),
+	REGULATOR_SUPPLY("avdd", "3-005d"),
+	/* Synaptics RMI4 Touchscreen device */
+	REGULATOR_SUPPLY("vdd", "3-004b"),
+	/* L3G4200D Gyroscope device */
+	REGULATOR_SUPPLY("vdd", "2-0068"),
+	/* Ambient light sensor device */
+	REGULATOR_SUPPLY("vdd", "3-0029"),
+	/* Pressure sensor device */
+	REGULATOR_SUPPLY("vdd", "2-005c"),
+	/* Cypress TrueTouch Touchscreen device */
+	REGULATOR_SUPPLY("vcpin", "spi8.0"),
+	/* Camera device */
+	REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
+};
+
+static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
+	/* On-board eMMC power */
+	REGULATOR_SUPPLY("vmmc", "sdi4"),
+	/* AB8500 audio codec */
+	REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
+	/* AB8500 accessory detect 1 */
+	REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"),
+	/* AB8500 Tv-out device */
+	REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"),
+	/* AV8100 HDMI device */
+	REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"),
+};
+
+static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
+	REGULATOR_SUPPLY("v-SD-STM", "stm"),
+	/* External MMC slot power */
+	REGULATOR_SUPPLY("vmmc", "sdi0"),
+};
+
+static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
+	/* TV-out DENC supply */
+	REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
+	/* Internal general-purpose ADC */
+	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
+	/* ADC for charger */
+	REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
+	/* AB8500 Tv-out device */
+	REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"),
+};
+
+static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
+	/* AB8500 audio-codec main supply */
+	REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
+	/* AB8500 audio-codec Mic1 supply */
+	REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
+	/* AB8500 audio-codec Mic2 supply */
+	REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
+	/* AB8500 audio-codec DMic supply */
+	REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
+	/* SoC core supply, no device */
+	REGULATOR_SUPPLY("v-intcore", NULL),
+	/* USB Transceiver */
+	REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
+	/* Handled by abx500 clk driver */
+	REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vana_consumers[] = {
+	/* DB8500 DSI */
+	REGULATOR_SUPPLY("vdddsi1v2", "mcde"),
+	REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"),
+	REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"),
+	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"),
+	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"),
+	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"),
+	/* DB8500 CSI */
+	REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"),
+};
+
+/* ab8500 regulator register initialization */
+static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
+	/*
+	 * VanaRequestCtrl          = HP/LP depending on VxRequest
+	 * VextSupply1RequestCtrl   = HP/LP depending on VxRequest
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2,       0xf0, 0x00),
+	/*
+	 * VextSupply2RequestCtrl   = HP/LP depending on VxRequest
+	 * VextSupply3RequestCtrl   = HP/LP depending on VxRequest
+	 * Vaux1RequestCtrl         = HP/LP depending on VxRequest
+	 * Vaux2RequestCtrl         = HP/LP depending on VxRequest
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3,       0xff, 0x00),
+	/*
+	 * Vaux3RequestCtrl         = HP/LP depending on VxRequest
+	 * SwHPReq                  = Control through SWValid disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4,       0x07, 0x00),
+	/*
+	 * VanaSysClkReq1HPValid    = disabled
+	 * Vaux1SysClkReq1HPValid   = disabled
+	 * Vaux2SysClkReq1HPValid   = disabled
+	 * Vaux3SysClkReq1HPValid   = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
+	/*
+	 * VextSupply1SysClkReq1HPValid = disabled
+	 * VextSupply2SysClkReq1HPValid = disabled
+	 * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
+	/*
+	 * VanaHwHPReq1Valid        = disabled
+	 * Vaux1HwHPreq1Valid       = disabled
+	 * Vaux2HwHPReq1Valid       = disabled
+	 * Vaux3HwHPReqValid        = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1,     0xe8, 0x00),
+	/*
+	 * VextSupply1HwHPReq1Valid = disabled
+	 * VextSupply2HwHPReq1Valid = disabled
+	 * VextSupply3HwHPReq1Valid = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2,     0x07, 0x00),
+	/*
+	 * VanaHwHPReq2Valid        = disabled
+	 * Vaux1HwHPReq2Valid       = disabled
+	 * Vaux2HwHPReq2Valid       = disabled
+	 * Vaux3HwHPReq2Valid       = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1,     0xe8, 0x00),
+	/*
+	 * VextSupply1HwHPReq2Valid = disabled
+	 * VextSupply2HwHPReq2Valid = disabled
+	 * VextSupply3HwHPReq2Valid = HWReq2 controlled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2,     0x07, 0x04),
+	/*
+	 * VanaSwHPReqValid         = disabled
+	 * Vaux1SwHPReqValid        = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1,      0xa0, 0x00),
+	/*
+	 * Vaux2SwHPReqValid        = disabled
+	 * Vaux3SwHPReqValid        = disabled
+	 * VextSupply1SwHPReqValid  = disabled
+	 * VextSupply2SwHPReqValid  = disabled
+	 * VextSupply3SwHPReqValid  = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2,      0x1f, 0x00),
+	/*
+	 * SysClkReq2Valid1         = SysClkReq2 controlled
+	 * SysClkReq3Valid1         = disabled
+	 * SysClkReq4Valid1         = SysClkReq4 controlled
+	 * SysClkReq5Valid1         = disabled
+	 * SysClkReq6Valid1         = SysClkReq6 controlled
+	 * SysClkReq7Valid1         = disabled
+	 * SysClkReq8Valid1         = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1,    0xfe, 0x2a),
+	/*
+	 * SysClkReq2Valid2         = disabled
+	 * SysClkReq3Valid2         = disabled
+	 * SysClkReq4Valid2         = disabled
+	 * SysClkReq5Valid2         = disabled
+	 * SysClkReq6Valid2         = SysClkReq6 controlled
+	 * SysClkReq7Valid2         = disabled
+	 * SysClkReq8Valid2         = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2,    0xfe, 0x20),
+	/*
+	 * VTVoutEna                = disabled
+	 * Vintcore12Ena            = disabled
+	 * Vintcore12Sel            = 1.25 V
+	 * Vintcore12LP             = inactive (HP)
+	 * VTVoutLP                 = inactive (HP)
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1,              0xfe, 0x10),
+	/*
+	 * VaudioEna                = disabled
+	 * VdmicEna                 = disabled
+	 * Vamic1Ena                = disabled
+	 * Vamic2Ena                = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY,           0x1e, 0x00),
+	/*
+	 * Vamic1_dzout             = high-Z when Vamic1 is disabled
+	 * Vamic2_dzout             = high-Z when Vamic2 is disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC,         0x03, 0x00),
+	/*
+	 * VPll                     = Hw controlled (NOTE! PRCMU bits)
+	 * VanaRegu                 = force off
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU,           0x0f, 0x02),
+	/*
+	 * VrefDDREna               = disabled
+	 * VrefDDRSleepMode         = inactive (no pulldown)
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_VREFDDR,                0x03, 0x00),
+	/*
+	 * VextSupply1Regu          = force LP
+	 * VextSupply2Regu          = force OFF
+	 * VextSupply3Regu          = force HP (-> STBB2=LP and TPS=LP)
+	 * ExtSupply2Bypass         = ExtSupply12LPn ball is 0 when Ena is 0
+	 * ExtSupply3Bypass         = ExtSupply3LPn ball is 0 when Ena is 0
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU,          0xff, 0x13),
+	/*
+	 * Vaux1Regu                = force HP
+	 * Vaux2Regu                = force off
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU,             0x0f, 0x01),
+	/*
+	 * Vaux3Regu                = force off
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU,          0x03, 0x00),
+	/*
+	 * Vaux1Sel                 = 2.8 V
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL,               0x0f, 0x0C),
+	/*
+	 * Vaux2Sel                 = 2.9 V
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL,               0x0f, 0x0d),
+	/*
+	 * Vaux3Sel                 = 2.91 V
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL,           0x07, 0x07),
+	/*
+	 * VextSupply12LP           = disabled (no LP)
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE,         0x01, 0x00),
+	/*
+	 * Vaux1Disch               = short discharge time
+	 * Vaux2Disch               = short discharge time
+	 * Vaux3Disch               = short discharge time
+	 * Vintcore12Disch          = short discharge time
+	 * VTVoutDisch              = short discharge time
+	 * VaudioDisch              = short discharge time
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH,          0xfc, 0x00),
+	/*
+	 * VanaDisch                = short discharge time
+	 * VdmicPullDownEna         = pulldown disabled when Vdmic is disabled
+	 * VdmicDisch               = short discharge time
+	 */
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2,         0x16, 0x00),
+};
+
+/* AB8500 regulators */
+static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
+	/* supplies to the display/camera */
+	[AB8500_LDO_AUX1] = {
+		.supply_regulator = "ab8500-ext-supply3",
+		.constraints = {
+			.name = "V-DISPLAY",
+			.min_uV = 2800000,
+			.max_uV = 3300000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS,
+			.boot_on = 1, /* display is on at boot */
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
+		.consumer_supplies = ab8500_vaux1_consumers,
+	},
+	/* supplies to the on-board eMMC */
+	[AB8500_LDO_AUX2] = {
+		.supply_regulator = "ab8500-ext-supply3",
+		.constraints = {
+			.name = "V-eMMC1",
+			.min_uV = 1100000,
+			.max_uV = 3300000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
+		.consumer_supplies = ab8500_vaux2_consumers,
+	},
+	/* supply for VAUX3, supplies to SDcard slots */
+	[AB8500_LDO_AUX3] = {
+		.supply_regulator = "ab8500-ext-supply3",
+		.constraints = {
+			.name = "V-MMC-SD",
+			.min_uV = 1100000,
+			.max_uV = 3300000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
+		.consumer_supplies = ab8500_vaux3_consumers,
+	},
+	/* supply for tvout, gpadc, TVOUT LDO */
+	[AB8500_LDO_TVOUT] = {
+		.constraints = {
+			.name = "V-TVOUT",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
+		.consumer_supplies = ab8500_vtvout_consumers,
+	},
+	/* supply for ab8500-vaudio, VAUDIO LDO */
+	[AB8500_LDO_AUDIO] = {
+		.constraints = {
+			.name = "V-AUD",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
+		.consumer_supplies = ab8500_vaud_consumers,
+	},
+	/* supply for v-anamic1 VAMic1-LDO */
+	[AB8500_LDO_ANAMIC1] = {
+		.constraints = {
+			.name = "V-AMIC1",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
+		.consumer_supplies = ab8500_vamic1_consumers,
+	},
+	/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
+	[AB8500_LDO_ANAMIC2] = {
+		.constraints = {
+			.name = "V-AMIC2",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
+		.consumer_supplies = ab8500_vamic2_consumers,
+	},
+	/* supply for v-dmic, VDMIC LDO */
+	[AB8500_LDO_DMIC] = {
+		.constraints = {
+			.name = "V-DMIC",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
+		.consumer_supplies = ab8500_vdmic_consumers,
+	},
+	/* supply for v-intcore12, VINTCORE12 LDO */
+	[AB8500_LDO_INTCORE] = {
+		.constraints = {
+			.name = "V-INTCORE",
+			.min_uV = 1250000,
+			.max_uV = 1350000,
+			.input_uV = 1800000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE |
+					  REGULATOR_CHANGE_DRMS,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
+		.consumer_supplies = ab8500_vintcore_consumers,
+	},
+	/* supply for U8500 CSI-DSI, VANA LDO */
+	[AB8500_LDO_ANA] = {
+		.constraints = {
+			.name = "V-CSI-DSI",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
+		.consumer_supplies = ab8500_vana_consumers,
+	},
+};
+
+/* supply for VextSupply3 */
+static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
+	/* SIM supply for 3 V SIM cards */
+	REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
+};
+
+/*
+ * AB8500 external regulators
+ */
+static struct regulator_init_data ab8500_ext_regulators[] = {
+	/* fixed Vbat supplies VSMPS1_EXT_1V8 */
+	[AB8500_EXT_SUPPLY1] = {
+		.constraints = {
+			.name = "ab8500-ext-supply1",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+			.initial_mode = REGULATOR_MODE_IDLE,
+			.boot_on = 1,
+			.always_on = 1,
+		},
+	},
+	/* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */
+	[AB8500_EXT_SUPPLY2] = {
+		.constraints = {
+			.name = "ab8500-ext-supply2",
+			.min_uV = 1360000,
+			.max_uV = 1360000,
+		},
+	},
+	/* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */
+	[AB8500_EXT_SUPPLY3] = {
+		.constraints = {
+			.name = "ab8500-ext-supply3",
+			.min_uV = 3400000,
+			.max_uV = 3400000,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.boot_on = 1,
+		},
+		.num_consumer_supplies =
+			ARRAY_SIZE(ab8500_ext_supply3_consumers),
+		.consumer_supplies = ab8500_ext_supply3_consumers,
+	},
+};
+
+static struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
+	.reg_init               = ab8500_reg_init,
+	.num_reg_init           = ARRAY_SIZE(ab8500_reg_init),
+	.regulator              = ab8500_regulators,
+	.num_regulator          = ARRAY_SIZE(ab8500_regulators),
+	.ext_regulator          = ab8500_ext_regulators,
+	.num_ext_regulator      = ARRAY_SIZE(ab8500_ext_regulators),
+};
+
 /**
  * struct ab8500_ext_regulator_info - ab8500 regulator information
  * @dev: device pointer
@@ -344,8 +794,7 @@ static struct of_regulator_match ab8500_ext_regulator_match[] = {
 static int ab8500_ext_regulator_probe(struct platform_device *pdev)
 {
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
-	struct ab8500_platform_data *ppdata;
-	struct ab8500_regulator_platform_data *pdata;
+	struct ab8500_regulator_platform_data *pdata = &ab8500_regulator_plat_data;
 	struct device_node *np = pdev->dev.of_node;
 	struct regulator_config config = { };
 	int i, err;
@@ -366,18 +815,6 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	ppdata = dev_get_platdata(ab8500->dev);
-	if (!ppdata) {
-		dev_err(&pdev->dev, "null parent pdata\n");
-		return -EINVAL;
-	}
-
-	pdata = ppdata->regulator;
-	if (!pdata) {
-		dev_err(&pdev->dev, "null pdata\n");
-		return -EINVAL;
-	}
-
 	/* make sure the platform data has the correct size */
 	if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) {
 		dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index a1cd0d4f8257..7652477e6a9d 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -395,12 +395,6 @@ static int act8865_pdata_from_dt(struct device *dev,
 	struct act8865_regulator_data *regulator;
 	struct of_regulator_match *matches;
 
-	np = of_get_child_by_name(dev->of_node, "regulators");
-	if (!np) {
-		dev_err(dev, "missing 'regulators' subnode in DT\n");
-		return -EINVAL;
-	}
-
 	switch (type) {
 	case ACT8600:
 		matches = act8600_matches;
@@ -419,6 +413,12 @@ static int act8865_pdata_from_dt(struct device *dev,
 		return -EINVAL;
 	}
 
+	np = of_get_child_by_name(dev->of_node, "regulators");
+	if (!np) {
+		dev_err(dev, "missing 'regulators' subnode in DT\n");
+		return -EINVAL;
+	}
+
 	matched = of_regulator_match(dev, np, matches, num_matches);
 	of_node_put(np);
 	if (matched <= 0)
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 63cd5e68c864..3a6d0290c54c 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 		if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
 			sreg->sel = 22;
 
-		if (!sreg->sel) {
+		if (!sreg->bypass && !sreg->sel) {
 			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 			return -EINVAL;
 		}
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 514a5e8fdbab..54382ef902c6 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -36,6 +36,8 @@
 
 #define AXP20X_FREQ_DCDC_MASK		0x0f
 
+#define AXP22X_MISC_N_VBUSEN_FUNC	BIT(4)
+
 #define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg,	\
 		    _vmask, _ereg, _emask, _enable_val, _disable_val)		\
 	[_family##_##_id] = {							\
@@ -230,9 +232,125 @@ static const struct regulator_desc axp22x_regulators[] = {
 	AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
 };
 
+static const struct regulator_desc axp22x_drivevbus_regulator = {
+	.name		= "drivevbus",
+	.supply_name	= "drivevbus",
+	.of_match	= of_match_ptr("drivevbus"),
+	.regulators_node = of_match_ptr("regulators"),
+	.type		= REGULATOR_VOLTAGE,
+	.owner		= THIS_MODULE,
+	.enable_reg	= AXP20X_VBUS_IPSOUT_MGMT,
+	.enable_mask	= BIT(2),
+	.ops		= &axp20x_ops_sw,
+};
+
+static const struct regulator_linear_range axp806_dcdca_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
+	REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
+};
+
+static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2d, 20000),
+	REGULATOR_LINEAR_RANGE(1600000, 0x2e, 0x3f, 100000),
+};
+
+static const struct regulator_linear_range axp806_cldo2_ranges[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
+	REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
+};
+
+static const struct regulator_desc axp806_regulators[] = {
+	AXP_DESC_RANGES(AXP806, DCDCA, "dcdca", "vina", axp806_dcdca_ranges,
+			72, AXP806_DCDCA_V_CTRL, 0x7f, AXP806_PWR_OUT_CTRL1,
+			BIT(0)),
+	AXP_DESC(AXP806, DCDCB, "dcdcb", "vinb", 1000, 2550, 50,
+		 AXP806_DCDCB_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(1)),
+	AXP_DESC_RANGES(AXP806, DCDCC, "dcdcc", "vinc", axp806_dcdca_ranges,
+			72, AXP806_DCDCC_V_CTRL, 0x7f, AXP806_PWR_OUT_CTRL1,
+			BIT(2)),
+	AXP_DESC_RANGES(AXP806, DCDCD, "dcdcd", "vind", axp806_dcdcd_ranges,
+			64, AXP806_DCDCD_V_CTRL, 0x3f, AXP806_PWR_OUT_CTRL1,
+			BIT(3)),
+	AXP_DESC(AXP806, DCDCE, "dcdce", "vine", 1100, 3400, 100,
+		 AXP806_DCDCB_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(4)),
+	AXP_DESC(AXP806, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+		 AXP806_ALDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(5)),
+	AXP_DESC(AXP806, ALDO2, "aldo2", "aldoin", 700, 3400, 100,
+		 AXP806_ALDO2_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(6)),
+	AXP_DESC(AXP806, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+		 AXP806_ALDO3_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(7)),
+	AXP_DESC(AXP806, BLDO1, "bldo1", "bldoin", 700, 1900, 100,
+		 AXP806_BLDO1_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(0)),
+	AXP_DESC(AXP806, BLDO2, "bldo2", "bldoin", 700, 1900, 100,
+		 AXP806_BLDO2_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(1)),
+	AXP_DESC(AXP806, BLDO3, "bldo3", "bldoin", 700, 1900, 100,
+		 AXP806_BLDO3_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(2)),
+	AXP_DESC(AXP806, BLDO4, "bldo4", "bldoin", 700, 1900, 100,
+		 AXP806_BLDO4_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(3)),
+	AXP_DESC(AXP806, CLDO1, "cldo1", "cldoin", 700, 3300, 100,
+		 AXP806_CLDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2, BIT(4)),
+	AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin", axp806_cldo2_ranges,
+			32, AXP806_CLDO2_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2,
+			BIT(5)),
+	AXP_DESC(AXP806, CLDO3, "cldo3", "cldoin", 700, 3300, 100,
+		 AXP806_CLDO3_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2, BIT(6)),
+	AXP_DESC_SW(AXP806, SW, "sw", "swin", AXP806_PWR_OUT_CTRL2, BIT(7)),
+};
+
+static const struct regulator_linear_range axp809_dcdc4_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2f, 20000),
+	REGULATOR_LINEAR_RANGE(1800000, 0x30, 0x38, 100000),
+};
+
+static const struct regulator_desc axp809_regulators[] = {
+	AXP_DESC(AXP809, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+		 AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)),
+	AXP_DESC(AXP809, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
+		 AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)),
+	AXP_DESC(AXP809, DCDC3, "dcdc3", "vin3", 600, 1860, 20,
+		 AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)),
+	AXP_DESC_RANGES(AXP809, DCDC4, "dcdc4", "vin4", axp809_dcdc4_ranges,
+			57, AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1,
+			BIT(4)),
+	AXP_DESC(AXP809, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
+		 AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
+	/* secondary switchable output of DCDC1 */
+	AXP_DESC_SW(AXP809, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
+		    BIT(7)),
+	/* LDO regulator internally chained to DCDC5 */
+	AXP_DESC(AXP809, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
+		 AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+	AXP_DESC(AXP809, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)),
+	AXP_DESC(AXP809, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
+	AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
+	AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp806_cldo2_ranges,
+			32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
+			BIT(3)),
+	AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)),
+	AXP_DESC(AXP809, ELDO1, "eldo1", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+	AXP_DESC(AXP809, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+	AXP_DESC(AXP809, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+	AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
+		    AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
+		    AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_FIXED(AXP809, RTC_LDO, "rtc_ldo", "ips", 1800),
+	AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
+};
+
 static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 {
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	unsigned int reg = AXP20X_DCDC_FREQ;
 	u32 min, max, def, step;
 
 	switch (axp20x->variant) {
@@ -243,8 +361,17 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 		def = 1500;
 		step = 75;
 		break;
+	case AXP806_ID:
+		/*
+		 * AXP806 DCDC work frequency setting has the same range and
+		 * step as AXP22X, but at a different register.
+		 * Fall through to the check below.
+		 * (See include/linux/mfd/axp20x.h)
+		 */
+		reg = AXP806_DCDC_FREQ_CTRL;
 	case AXP221_ID:
 	case AXP223_ID:
+	case AXP809_ID:
 		min = 1800;
 		max = 4050;
 		def = 3000;
@@ -273,7 +400,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 
 	dcdcfreq = (dcdcfreq - min) / step;
 
-	return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ,
+	return regmap_update_bits(axp20x->regmap, reg,
 				  AXP20X_FREQ_DCDC_MASK, dcdcfreq);
 }
 
@@ -307,6 +434,7 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
 static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
 {
 	struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
+	unsigned int reg = AXP20X_DCDC_MODE;
 	unsigned int mask;
 
 	switch (axp20x->variant) {
@@ -322,8 +450,16 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
 		workmode <<= ffs(mask) - 1;
 		break;
 
+	case AXP806_ID:
+		reg = AXP806_DCDC_MODE_CTRL2;
+		/*
+		 * AXP806 DCDC regulator IDs have the same range as AXP22X.
+		 * Fall through to the check below.
+		 * (See include/linux/mfd/axp20x.h)
+		 */
 	case AXP221_ID:
 	case AXP223_ID:
+	case AXP809_ID:
 		if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5)
 			return -EINVAL;
 
@@ -337,7 +473,34 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
 		return -EINVAL;
 	}
 
-	return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode);
+	return regmap_update_bits(rdev->regmap, reg, mask, workmode);
+}
+
+/*
+ * This function checks whether a regulator is part of a poly-phase
+ * output setup based on the registers settings. Returns true if it is.
+ */
+static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
+{
+	u32 reg = 0;
+
+	/* Only AXP806 has poly-phase outputs */
+	if (axp20x->variant != AXP806_ID)
+		return false;
+
+	regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, &reg);
+
+	switch (id) {
+	case AXP806_DCDCB:
+		return (((reg & GENMASK(7, 6)) == BIT(6)) ||
+			((reg & GENMASK(7, 6)) == BIT(7)));
+	case AXP806_DCDCC:
+		return ((reg & GENMASK(7, 6)) == BIT(7));
+	case AXP806_DCDCE:
+		return !!(reg & BIT(5));
+	}
+
+	return false;
 }
 
 static int axp20x_regulator_probe(struct platform_device *pdev)
@@ -352,8 +515,9 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 	};
 	int ret, i, nregulators;
 	u32 workmode;
-	const char *axp22x_dc1_name = axp22x_regulators[AXP22X_DCDC1].name;
-	const char *axp22x_dc5_name = axp22x_regulators[AXP22X_DCDC5].name;
+	const char *dcdc1_name = axp22x_regulators[AXP22X_DCDC1].name;
+	const char *dcdc5_name = axp22x_regulators[AXP22X_DCDC5].name;
+	bool drivevbus = false;
 
 	switch (axp20x->variant) {
 	case AXP202_ID:
@@ -365,6 +529,16 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 	case AXP223_ID:
 		regulators = axp22x_regulators;
 		nregulators = AXP22X_REG_ID_MAX;
+		drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
+						  "x-powers,drive-vbus-en");
+		break;
+	case AXP806_ID:
+		regulators = axp806_regulators;
+		nregulators = AXP806_REG_ID_MAX;
+		break;
+	case AXP809_ID:
+		regulators = axp809_regulators;
+		nregulators = AXP809_REG_ID_MAX;
 		break;
 	default:
 		dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
@@ -380,6 +554,14 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		struct regulator_desc *new_desc;
 
 		/*
+		 * If this regulator is a slave in a poly-phase setup,
+		 * skip it, as its controls are bound to the master
+		 * regulator and won't work.
+		 */
+		if (axp20x_is_polyphase_slave(axp20x, i))
+			continue;
+
+		/*
 		 * Regulators DC1SW and DC5LDO are connected internally,
 		 * so we have to handle their supply names separately.
 		 *
@@ -388,22 +570,22 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		 * part of this loop to see where we save the DT defined
 		 * name.
 		 */
-		if (regulators == axp22x_regulators) {
-			if (i == AXP22X_DC1SW) {
-				new_desc = devm_kzalloc(&pdev->dev,
-							sizeof(*desc),
-							GFP_KERNEL);
-				*new_desc = regulators[i];
-				new_desc->supply_name = axp22x_dc1_name;
-				desc = new_desc;
-			} else if (i == AXP22X_DC5LDO) {
-				new_desc = devm_kzalloc(&pdev->dev,
-							sizeof(*desc),
-							GFP_KERNEL);
-				*new_desc = regulators[i];
-				new_desc->supply_name = axp22x_dc5_name;
-				desc = new_desc;
-			}
+		if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
+		    (regulators == axp809_regulators && i == AXP809_DC1SW)) {
+			new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
+						GFP_KERNEL);
+			*new_desc = regulators[i];
+			new_desc->supply_name = dcdc1_name;
+			desc = new_desc;
+		}
+
+		if ((regulators == axp22x_regulators && i == AXP22X_DC5LDO) ||
+		    (regulators == axp809_regulators && i == AXP809_DC5LDO)) {
+			new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
+						GFP_KERNEL);
+			*new_desc = regulators[i];
+			new_desc->supply_name = dcdc5_name;
+			desc = new_desc;
 		}
 
 		rdev = devm_regulator_register(&pdev->dev, desc, &config);
@@ -426,16 +608,29 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		/*
 		 * Save AXP22X DCDC1 / DCDC5 regulator names for later.
 		 */
-		if (regulators == axp22x_regulators) {
-			/* Can we use rdev->constraints->name instead? */
-			if (i == AXP22X_DCDC1)
-				of_property_read_string(rdev->dev.of_node,
-							"regulator-name",
-							&axp22x_dc1_name);
-			else if (i == AXP22X_DCDC5)
-				of_property_read_string(rdev->dev.of_node,
-							"regulator-name",
-							&axp22x_dc5_name);
+		if ((regulators == axp22x_regulators && i == AXP22X_DCDC1) ||
+		    (regulators == axp809_regulators && i == AXP809_DCDC1))
+			of_property_read_string(rdev->dev.of_node,
+						"regulator-name",
+						&dcdc1_name);
+
+		if ((regulators == axp22x_regulators && i == AXP22X_DCDC5) ||
+		    (regulators == axp809_regulators && i == AXP809_DCDC5))
+			of_property_read_string(rdev->dev.of_node,
+						"regulator-name",
+						&dcdc5_name);
+	}
+
+	if (drivevbus) {
+		/* Change N_VBUSEN sense pin to DRIVEVBUS output pin */
+		regmap_update_bits(axp20x->regmap, AXP20X_OVER_TMP,
+				   AXP22X_MISC_N_VBUSEN_FUNC, 0);
+		rdev = devm_regulator_register(&pdev->dev,
+					       &axp22x_drivevbus_regulator,
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "Failed to register drivevbus\n");
+			return PTR_ERR(rdev);
 		}
 	}
 
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index ec8184d53f13..08260c215895 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -679,24 +679,6 @@ static int drms_uA_update(struct regulator_dev *rdev)
 	    !rdev->desc->ops->set_load)
 		return -EINVAL;
 
-	/* get output voltage */
-	output_uV = _regulator_get_voltage(rdev);
-	if (output_uV <= 0) {
-		rdev_err(rdev, "invalid output voltage found\n");
-		return -EINVAL;
-	}
-
-	/* get input voltage */
-	input_uV = 0;
-	if (rdev->supply)
-		input_uV = regulator_get_voltage(rdev->supply);
-	if (input_uV <= 0)
-		input_uV = rdev->constraints->input_uV;
-	if (input_uV <= 0) {
-		rdev_err(rdev, "invalid input voltage found\n");
-		return -EINVAL;
-	}
-
 	/* calc total requested load */
 	list_for_each_entry(sibling, &rdev->consumer_list, list)
 		current_uA += sibling->uA_load;
@@ -709,6 +691,24 @@ static int drms_uA_update(struct regulator_dev *rdev)
 		if (err < 0)
 			rdev_err(rdev, "failed to set load %d\n", current_uA);
 	} else {
+		/* get output voltage */
+		output_uV = _regulator_get_voltage(rdev);
+		if (output_uV <= 0) {
+			rdev_err(rdev, "invalid output voltage found\n");
+			return -EINVAL;
+		}
+
+		/* get input voltage */
+		input_uV = 0;
+		if (rdev->supply)
+			input_uV = regulator_get_voltage(rdev->supply);
+		if (input_uV <= 0)
+			input_uV = rdev->constraints->input_uV;
+		if (input_uV <= 0) {
+			rdev_err(rdev, "invalid input voltage found\n");
+			return -EINVAL;
+		}
+
 		/* now get the optimum mode for our new total regulator load */
 		mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
 							 output_uV, current_uA);
@@ -2509,33 +2509,6 @@ int regulator_is_enabled(struct regulator *regulator)
 EXPORT_SYMBOL_GPL(regulator_is_enabled);
 
 /**
- * regulator_can_change_voltage - check if regulator can change voltage
- * @regulator: regulator source
- *
- * Returns positive if the regulator driver backing the source/client
- * can change its voltage, false otherwise. Useful for detecting fixed
- * or dummy regulators and disabling voltage change logic in the client
- * driver.
- */
-int regulator_can_change_voltage(struct regulator *regulator)
-{
-	struct regulator_dev	*rdev = regulator->rdev;
-
-	if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
-		if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1)
-			return 1;
-
-		if (rdev->desc->continuous_voltage_range &&
-		    rdev->constraints->min_uV && rdev->constraints->max_uV &&
-		    rdev->constraints->min_uV != rdev->constraints->max_uV)
-			return 1;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(regulator_can_change_voltage);
-
-/**
  * regulator_count_voltages - count regulator_list_voltage() selectors
  * @regulator: regulator source
  *
@@ -2770,6 +2743,24 @@ static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev,
 	return ret;
 }
 
+static int _regulator_set_voltage_time(struct regulator_dev *rdev,
+				       int old_uV, int new_uV)
+{
+	unsigned int ramp_delay = 0;
+
+	if (rdev->constraints->ramp_delay)
+		ramp_delay = rdev->constraints->ramp_delay;
+	else if (rdev->desc->ramp_delay)
+		ramp_delay = rdev->desc->ramp_delay;
+
+	if (ramp_delay == 0) {
+		rdev_warn(rdev, "ramp_delay not set\n");
+		return 0;
+	}
+
+	return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_delay);
+}
+
 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 				     int min_uV, int max_uV)
 {
@@ -2778,6 +2769,8 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	int best_val = 0;
 	unsigned int selector;
 	int old_selector = -1;
+	const struct regulator_ops *ops = rdev->desc->ops;
+	int old_uV = _regulator_get_voltage(rdev);
 
 	trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV);
 
@@ -2789,29 +2782,28 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	 * info to call set_voltage_time_sel().
 	 */
 	if (_regulator_is_enabled(rdev) &&
-	    rdev->desc->ops->set_voltage_time_sel &&
-	    rdev->desc->ops->get_voltage_sel) {
-		old_selector = rdev->desc->ops->get_voltage_sel(rdev);
+	    ops->set_voltage_time_sel && ops->get_voltage_sel) {
+		old_selector = ops->get_voltage_sel(rdev);
 		if (old_selector < 0)
 			return old_selector;
 	}
 
-	if (rdev->desc->ops->set_voltage) {
+	if (ops->set_voltage) {
 		ret = _regulator_call_set_voltage(rdev, min_uV, max_uV,
 						  &selector);
 
 		if (ret >= 0) {
-			if (rdev->desc->ops->list_voltage)
-				best_val = rdev->desc->ops->list_voltage(rdev,
-									 selector);
+			if (ops->list_voltage)
+				best_val = ops->list_voltage(rdev,
+							     selector);
 			else
 				best_val = _regulator_get_voltage(rdev);
 		}
 
-	} else if (rdev->desc->ops->set_voltage_sel) {
+	} else if (ops->set_voltage_sel) {
 		ret = regulator_map_voltage(rdev, min_uV, max_uV);
 		if (ret >= 0) {
-			best_val = rdev->desc->ops->list_voltage(rdev, ret);
+			best_val = ops->list_voltage(rdev, ret);
 			if (min_uV <= best_val && max_uV >= best_val) {
 				selector = ret;
 				if (old_selector == selector)
@@ -2827,34 +2819,50 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 		ret = -EINVAL;
 	}
 
-	/* Call set_voltage_time_sel if successfully obtained old_selector */
-	if (ret == 0 && !rdev->constraints->ramp_disable && old_selector >= 0
-		&& old_selector != selector) {
+	if (ret)
+		goto out;
 
-		delay = rdev->desc->ops->set_voltage_time_sel(rdev,
-						old_selector, selector);
-		if (delay < 0) {
-			rdev_warn(rdev, "set_voltage_time_sel() failed: %d\n",
-				  delay);
-			delay = 0;
+	if (ops->set_voltage_time_sel) {
+		/*
+		 * Call set_voltage_time_sel if successfully obtained
+		 * old_selector
+		 */
+		if (old_selector >= 0 && old_selector != selector)
+			delay = ops->set_voltage_time_sel(rdev, old_selector,
+							  selector);
+	} else {
+		if (old_uV != best_val) {
+			if (ops->set_voltage_time)
+				delay = ops->set_voltage_time(rdev, old_uV,
+							      best_val);
+			else
+				delay = _regulator_set_voltage_time(rdev,
+								    old_uV,
+								    best_val);
 		}
+	}
 
-		/* Insert any necessary delays */
-		if (delay >= 1000) {
-			mdelay(delay / 1000);
-			udelay(delay % 1000);
-		} else if (delay) {
-			udelay(delay);
-		}
+	if (delay < 0) {
+		rdev_warn(rdev, "failed to get delay: %d\n", delay);
+		delay = 0;
+	}
+
+	/* Insert any necessary delays */
+	if (delay >= 1000) {
+		mdelay(delay / 1000);
+		udelay(delay % 1000);
+	} else if (delay) {
+		udelay(delay);
 	}
 
-	if (ret == 0 && best_val >= 0) {
+	if (best_val >= 0) {
 		unsigned long data = best_val;
 
 		_notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE,
 				     (void *)data);
 	}
 
+out:
 	trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val);
 
 	return ret;
@@ -3025,9 +3033,13 @@ int regulator_set_voltage_time(struct regulator *regulator,
 	int voltage;
 	int i;
 
+	if (ops->set_voltage_time)
+		return ops->set_voltage_time(rdev, old_uV, new_uV);
+	else if (!ops->set_voltage_time_sel)
+		return _regulator_set_voltage_time(rdev, old_uV, new_uV);
+
 	/* Currently requires operations to do this */
-	if (!ops->list_voltage || !ops->set_voltage_time_sel
-	    || !rdev->desc->n_voltages)
+	if (!ops->list_voltage || !rdev->desc->n_voltages)
 		return -EINVAL;
 
 	for (i = 0; i < rdev->desc->n_voltages; i++) {
@@ -3066,19 +3078,8 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 				   unsigned int old_selector,
 				   unsigned int new_selector)
 {
-	unsigned int ramp_delay = 0;
 	int old_volt, new_volt;
 
-	if (rdev->constraints->ramp_delay)
-		ramp_delay = rdev->constraints->ramp_delay;
-	else if (rdev->desc->ramp_delay)
-		ramp_delay = rdev->desc->ramp_delay;
-
-	if (ramp_delay == 0) {
-		rdev_warn(rdev, "ramp_delay not set\n");
-		return 0;
-	}
-
 	/* sanity check */
 	if (!rdev->desc->ops->list_voltage)
 		return -EINVAL;
@@ -3086,7 +3087,11 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 	old_volt = rdev->desc->ops->list_voltage(rdev, old_selector);
 	new_volt = rdev->desc->ops->list_voltage(rdev, new_selector);
 
-	return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
+	if (rdev->desc->ops->set_voltage_time)
+		return rdev->desc->ops->set_voltage_time(rdev, old_volt,
+							 new_volt);
+	else
+		return _regulator_set_voltage_time(rdev, old_volt, new_volt);
 }
 EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);
 
@@ -3354,6 +3359,39 @@ unsigned int regulator_get_mode(struct regulator *regulator)
 }
 EXPORT_SYMBOL_GPL(regulator_get_mode);
 
+static int _regulator_get_error_flags(struct regulator_dev *rdev,
+					unsigned int *flags)
+{
+	int ret;
+
+	mutex_lock(&rdev->mutex);
+
+	/* sanity check */
+	if (!rdev->desc->ops->get_error_flags) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = rdev->desc->ops->get_error_flags(rdev, flags);
+out:
+	mutex_unlock(&rdev->mutex);
+	return ret;
+}
+
+/**
+ * regulator_get_error_flags - get regulator error information
+ * @regulator: regulator source
+ * @flags: pointer to store error flags
+ *
+ * Get the current regulator error information.
+ */
+int regulator_get_error_flags(struct regulator *regulator,
+				unsigned int *flags)
+{
+	return _regulator_get_error_flags(regulator->rdev, flags);
+}
+EXPORT_SYMBOL_GPL(regulator_get_error_flags);
+
 /**
  * regulator_set_load - set regulator load
  * @regulator: regulator source
@@ -3510,10 +3548,8 @@ int regulator_bulk_get(struct device *dev, int num_consumers,
 		consumers[i].consumer = NULL;
 
 	for (i = 0; i < num_consumers; i++) {
-		consumers[i].consumer = _regulator_get(dev,
-						       consumers[i].supply,
-						       false,
-						       !consumers[i].optional);
+		consumers[i].consumer = regulator_get(dev,
+						      consumers[i].supply);
 		if (IS_ERR(consumers[i].consumer)) {
 			ret = PTR_ERR(consumers[i].consumer);
 			dev_err(dev, "Failed to get supply '%s': %d\n",
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 1050cb77561a..9ececfef42d6 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -333,7 +333,7 @@ static const struct regulator_ops da9052_ldo_ops = {
 static struct da9052_regulator_info da9052_regulator_info[] = {
 	DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
 	DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
-	DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO),
+	DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
 	DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0),
 	DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
 	DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
@@ -350,8 +350,8 @@ static struct da9052_regulator_info da9052_regulator_info[] = {
 static struct da9052_regulator_info da9053_regulator_info[] = {
 	DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
 	DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
-	DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO),
-	DA9052_DCDC(BUCK4, 25, 925, 2500, 6, 6, 0),
+	DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
+	DA9052_DCDC(BUCK4, 25, 950, 2525, 6, 6, 0),
 	DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
 	DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
 	DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c
index 01c0e3709b66..d0496d6b0934 100644
--- a/drivers/regulator/da9210-regulator.c
+++ b/drivers/regulator/da9210-regulator.c
@@ -21,12 +21,11 @@
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/slab.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/of_device.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regmap.h>
 
@@ -179,6 +178,13 @@ error_i2c:
 /*
  * I2C driver interface functions
  */
+
+static const struct of_device_id da9210_dt_ids[] = {
+	{ .compatible = "dlg,da9210", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da9210_dt_ids);
+
 static int da9210_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
@@ -188,6 +194,16 @@ static int da9210_i2c_probe(struct i2c_client *i2c,
 	struct regulator_dev *rdev = NULL;
 	struct regulator_config config = { };
 	int error;
+	const struct of_device_id *match;
+
+	if (i2c->dev.of_node && !pdata) {
+		match = of_match_device(of_match_ptr(da9210_dt_ids),
+						&i2c->dev);
+		if (!match) {
+			dev_err(&i2c->dev, "Error: No device match found\n");
+			return -ENODEV;
+		}
+	}
 
 	chip = devm_kzalloc(&i2c->dev, sizeof(struct da9210), GFP_KERNEL);
 	if (!chip)
@@ -264,6 +280,7 @@ MODULE_DEVICE_TABLE(i2c, da9210_i2c_id);
 static struct i2c_driver da9210_regulator_driver = {
 	.driver = {
 		.name = "da9210",
+		.of_match_table = of_match_ptr(da9210_dt_ids),
 	},
 	.probe = da9210_i2c_probe,
 	.id_table = da9210_i2c_id,
diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index 236abf473db5..aa47280efd32 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -1,5 +1,6 @@
 /*
- * da9211-regulator.c - Regulator device driver for DA9211/DA9213/DA9215
+ * da9211-regulator.c - Regulator device driver for DA9211/DA9212
+ * /DA9213/DA9214/DA9215
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This library is free software; you can redistribute it and/or
@@ -493,7 +494,9 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
 
 static const struct i2c_device_id da9211_i2c_id[] = {
 	{"da9211", DA9211},
+	{"da9212", DA9212},
 	{"da9213", DA9213},
+	{"da9214", DA9214},
 	{"da9215", DA9215},
 	{},
 };
@@ -502,8 +505,10 @@ MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
 #ifdef CONFIG_OF
 static const struct of_device_id da9211_dt_ids[] = {
 	{ .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
-	{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[1] },
-	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[2] },
+	{ .compatible = "dlg,da9212", .data = &da9211_i2c_id[1] },
+	{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[2] },
+	{ .compatible = "dlg,da9214", .data = &da9211_i2c_id[3] },
+	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[4] },
 	{},
 };
 MODULE_DEVICE_TABLE(of, da9211_dt_ids);
@@ -521,5 +526,5 @@ static struct i2c_driver da9211_regulator_driver = {
 module_i2c_driver(da9211_regulator_driver);
 
 MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
-MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213/DA9215");
+MODULE_DESCRIPTION("DA9211/DA9212/DA9213/DA9214/DA9215 regulator driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/da9211-regulator.h b/drivers/regulator/da9211-regulator.h
index d6ad96fc64d3..b841bbf330cc 100644
--- a/drivers/regulator/da9211-regulator.h
+++ b/drivers/regulator/da9211-regulator.h
@@ -1,5 +1,6 @@
 /*
- * da9211-regulator.h - Regulator definitions for DA9211/DA9213/DA9215
+ * da9211-regulator.h - Regulator definitions for DA9211/DA9212
+ * /DA9213/DA9214/DA9215
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c
index 3963dfad766c..8976141c1438 100644
--- a/drivers/regulator/dbx500-prcmu.c
+++ b/drivers/regulator/dbx500-prcmu.c
@@ -75,24 +75,6 @@ static struct ux500_regulator_debug {
 	u8 *state_after_suspend;
 } rdebug;
 
-void ux500_regulator_suspend_debug(void)
-{
-	int i;
-
-	for (i = 0; i < rdebug.num_regulators; i++)
-		rdebug.state_before_suspend[i] =
-			rdebug.regulator_array[i].is_enabled;
-}
-
-void ux500_regulator_resume_debug(void)
-{
-	int i;
-
-	for (i = 0; i < rdebug.num_regulators; i++)
-		rdebug.state_after_suspend[i] =
-			rdebug.regulator_array[i].is_enabled;
-}
-
 static int ux500_regulator_power_state_cnt_print(struct seq_file *s, void *p)
 {
 	/* print power state count */
diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c
index 6ad8ab4c578d..6ec1d400adae 100644
--- a/drivers/regulator/devres.c
+++ b/drivers/regulator/devres.c
@@ -164,11 +164,8 @@ int devm_regulator_bulk_get(struct device *dev, int num_consumers,
 		consumers[i].consumer = NULL;
 
 	for (i = 0; i < num_consumers; i++) {
-		consumers[i].consumer = _devm_regulator_get(dev,
-							    consumers[i].supply,
-							    consumers[i].optional ?
-								OPTIONAL_GET :
-								NORMAL_GET);
+		consumers[i].consumer = devm_regulator_get(dev,
+							   consumers[i].supply);
 		if (IS_ERR(consumers[i].consumer)) {
 			ret = PTR_ERR(consumers[i].consumer);
 			dev_err(dev, "Failed to get supply '%s': %d\n",
diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c
index 42dc5fb8c899..62c5f5445d44 100644
--- a/drivers/regulator/hi6421-regulator.c
+++ b/drivers/regulator/hi6421-regulator.c
@@ -477,7 +477,8 @@ static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
 	return 0;
 }
 
-unsigned int hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
+static unsigned int
+hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
 			int input_uV, int output_uV, int load_uA)
 {
 	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c
index b4ffd113ba21..e504b9148226 100644
--- a/drivers/regulator/lp873x-regulator.c
+++ b/drivers/regulator/lp873x-regulator.c
@@ -20,7 +20,7 @@
 #include <linux/mfd/lp873x.h>
 
 #define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
-			 _delay, _lr, _nlr, _cr)			\
+			 _delay, _lr, _cr)				\
 	[_id] = {							\
 		.desc = {						\
 			.name			= _name,		\
@@ -37,7 +37,7 @@
 			.enable_mask		= _em,			\
 			.ramp_delay		= _delay,		\
 			.linear_ranges		= _lr,			\
-			.n_linear_ranges	= _nlr,			\
+			.n_linear_ranges	= ARRAY_SIZE(_lr),	\
 		},							\
 		.ctrl2_reg = _cr,					\
 	}
@@ -175,22 +175,20 @@ static const struct lp873x_regulator regulators[] = {
 			 256, LP873X_REG_BUCK0_VOUT,
 			 LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1,
 			 LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000,
-			 buck0_buck1_ranges, 4, LP873X_REG_BUCK0_CTRL_2),
+			 buck0_buck1_ranges, LP873X_REG_BUCK0_CTRL_2),
 	LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops,
 			 256, LP873X_REG_BUCK1_VOUT,
 			 LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1,
 			 LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000,
-			 buck0_buck1_ranges, 4, LP873X_REG_BUCK1_CTRL_2),
+			 buck0_buck1_ranges, LP873X_REG_BUCK1_CTRL_2),
 	LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26,
 			 LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET,
 			 LP873X_REG_LDO0_CTRL,
-			 LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 1,
-			 0xFF),
+			 LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 0xFF),
 	LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26,
 			 LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET,
 			 LP873X_REG_LDO1_CTRL,
-			 LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 1,
-			 0xFF),
+			 LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 0xFF),
 };
 
 static int lp873x_regulator_probe(struct platform_device *pdev)
diff --git a/drivers/regulator/ltc3676.c b/drivers/regulator/ltc3676.c
new file mode 100644
index 000000000000..e2b476ca2b4d
--- /dev/null
+++ b/drivers/regulator/ltc3676.c
@@ -0,0 +1,420 @@
+/*
+ * Copyright (C) 2016 Gateworks Corporation, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#define DRIVER_NAME		"ltc3676"
+
+/* LTC3676 Registers */
+#define LTC3676_BUCK1     0x01
+#define LTC3676_BUCK2     0x02
+#define LTC3676_BUCK3     0x03
+#define LTC3676_BUCK4     0x04
+#define LTC3676_LDOA      0x05
+#define LTC3676_LDOB      0x06
+#define LTC3676_SQD1      0x07
+#define LTC3676_SQD2      0x08
+#define LTC3676_CNTRL     0x09
+#define LTC3676_DVB1A     0x0A
+#define LTC3676_DVB1B     0x0B
+#define LTC3676_DVB2A     0x0C
+#define LTC3676_DVB2B     0x0D
+#define LTC3676_DVB3A     0x0E
+#define LTC3676_DVB3B     0x0F
+#define LTC3676_DVB4A     0x10
+#define LTC3676_DVB4B     0x11
+#define LTC3676_MSKIRQ    0x12
+#define LTC3676_MSKPG     0x13
+#define LTC3676_USER      0x14
+#define LTC3676_IRQSTAT   0x15
+#define LTC3676_PGSTATL   0x16
+#define LTC3676_PGSTATRT  0x17
+#define LTC3676_HRST      0x1E
+#define LTC3676_CLIRQ     0x1F
+
+#define LTC3676_DVBxA_REF_SELECT	BIT(5)
+
+#define LTC3676_IRQSTAT_PGOOD_TIMEOUT	BIT(3)
+#define LTC3676_IRQSTAT_UNDERVOLT_WARN	BIT(4)
+#define LTC3676_IRQSTAT_UNDERVOLT_FAULT	BIT(5)
+#define LTC3676_IRQSTAT_THERMAL_WARN	BIT(6)
+#define LTC3676_IRQSTAT_THERMAL_FAULT	BIT(7)
+
+enum ltc3676_reg {
+	LTC3676_SW1,
+	LTC3676_SW2,
+	LTC3676_SW3,
+	LTC3676_SW4,
+	LTC3676_LDO1,
+	LTC3676_LDO2,
+	LTC3676_LDO3,
+	LTC3676_LDO4,
+	LTC3676_NUM_REGULATORS,
+};
+
+struct ltc3676 {
+	struct regmap *regmap;
+	struct device *dev;
+	struct regulator_desc regulator_descs[LTC3676_NUM_REGULATORS];
+	struct regulator_dev *regulators[LTC3676_NUM_REGULATORS];
+};
+
+static int ltc3676_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+	struct ltc3676 *ltc3676 = rdev_get_drvdata(rdev);
+	struct device *dev = ltc3676->dev;
+	int dcdc = rdev_get_id(rdev);
+	int sel;
+
+	dev_dbg(dev, "%s id=%d uV=%d\n", __func__, dcdc, uV);
+	sel = regulator_map_voltage_linear(rdev, uV, uV);
+	if (sel < 0)
+		return sel;
+
+	/* DVBB register follows right after the corresponding DVBA register */
+	return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg + 1,
+				  rdev->desc->vsel_mask, sel);
+}
+
+static int ltc3676_set_suspend_mode(struct regulator_dev *rdev,
+				    unsigned int mode)
+{
+	struct ltc3676 *ltc3676= rdev_get_drvdata(rdev);
+	struct device *dev = ltc3676->dev;
+	int mask, val;
+	int dcdc = rdev_get_id(rdev);
+
+	dev_dbg(dev, "%s id=%d mode=%d\n", __func__, dcdc, mode);
+
+	mask = LTC3676_DVBxA_REF_SELECT;
+	switch (mode) {
+	case REGULATOR_MODE_STANDBY:
+		val = 0; /* select DVBxA */
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = LTC3676_DVBxA_REF_SELECT; /* select DVBxB */
+		break;
+	default:
+		dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
+			 rdev->desc->name, mode);
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg,
+				  mask, val);
+}
+
+static inline unsigned int ltc3676_scale(unsigned int uV, u32 r1, u32 r2)
+{
+	uint64_t tmp;
+	if (uV == 0)
+		return 0;
+	tmp = (uint64_t)uV * r1;
+	do_div(tmp, r2);
+	return uV + (unsigned int)tmp;
+}
+
+static int ltc3676_of_parse_cb(struct device_node *np,
+			       const struct regulator_desc *desc,
+			       struct regulator_config *config)
+{
+	struct ltc3676 *ltc3676 = config->driver_data;
+	struct regulator_desc *rdesc = &ltc3676->regulator_descs[desc->id];
+	u32 r[2];
+	int ret;
+
+	/* LDO3 has a fixed output */
+	if (desc->id == LTC3676_LDO3)
+		return 0;
+
+	ret = of_property_read_u32_array(np, "lltc,fb-voltage-divider", r, 2);
+	if (ret) {
+		dev_err(ltc3676->dev, "Failed to parse voltage divider: %d\n",
+			ret);
+		return ret;
+	}
+
+	rdesc->min_uV = ltc3676_scale(desc->min_uV, r[0], r[1]);
+	rdesc->uV_step = ltc3676_scale(desc->uV_step, r[0], r[1]);
+	rdesc->fixed_uV = ltc3676_scale(desc->fixed_uV, r[0], r[1]);
+
+	return 0;
+}
+
+/* SW1, SW2, SW3, SW4 linear 0.8V-3.3V with scalar via R1/R2 feeback res */
+static struct regulator_ops ltc3676_linear_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_suspend_voltage = ltc3676_set_suspend_voltage,
+	.set_suspend_mode = ltc3676_set_suspend_mode,
+};
+
+/* LDO1 always on fixed 0.8V-3.3V via scalar via R1/R2 feeback res */
+static struct regulator_ops ltc3676_fixed_standby_regulator_ops = {
+};
+
+/* LDO2, LDO3 fixed (LDO2 has external scalar via R1/R2 feedback res) */
+static struct regulator_ops ltc3676_fixed_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+#define LTC3676_REG(_id, _name, _ops, en_reg, en_bit, dvba_reg, dvb_mask)   \
+	[LTC3676_ ## _id] = {                                        \
+		.name = #_name,                                \
+		.of_match = of_match_ptr(#_name),              \
+		.regulators_node = of_match_ptr("regulators"), \
+		.of_parse_cb = ltc3676_of_parse_cb,            \
+		.n_voltages = (dvb_mask) + 1,                  \
+		.min_uV = (dvba_reg) ? 412500 : 0,             \
+		.uV_step = (dvba_reg) ? 12500 : 0,             \
+		.ramp_delay = (dvba_reg) ? 800 : 0,            \
+		.fixed_uV = (dvb_mask) ? 0 : 725000,           \
+		.ops = &ltc3676_ ## _ops ## _regulator_ops,    \
+		.type = REGULATOR_VOLTAGE,                     \
+		.id = LTC3676_ ## _id,                         \
+		.owner = THIS_MODULE,                          \
+		.vsel_reg = (dvba_reg),                        \
+		.vsel_mask = (dvb_mask),                       \
+		.enable_reg = (en_reg),                        \
+		.enable_mask = (1 << en_bit),                  \
+	}
+
+#define LTC3676_LINEAR_REG(_id, _name, _en, _dvba)                     \
+	LTC3676_REG(_id, _name, linear,                                \
+		    LTC3676_ ## _en, 7,                                \
+		    LTC3676_ ## _dvba, 0x1f)
+
+#define LTC3676_FIXED_REG(_id, _name, _en_reg, _en_bit)                \
+	LTC3676_REG(_id, _name, fixed, LTC3676_ ## _en_reg, _en_bit, 0, 0)
+
+static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = {
+	LTC3676_LINEAR_REG(SW1, sw1, BUCK1, DVB1A),
+	LTC3676_LINEAR_REG(SW2, sw2, BUCK2, DVB2A),
+	LTC3676_LINEAR_REG(SW3, sw3, BUCK3, DVB3A),
+	LTC3676_LINEAR_REG(SW4, sw4, BUCK4, DVB4A),
+	LTC3676_REG(LDO1, ldo1, fixed_standby, 0, 0, 0, 0),
+	LTC3676_FIXED_REG(LDO2, ldo2, LDOA, 2),
+	LTC3676_FIXED_REG(LDO3, ldo3, LDOA, 5),
+	LTC3676_FIXED_REG(LDO4, ldo4, LDOB, 2),
+};
+
+static bool ltc3676_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LTC3676_IRQSTAT:
+	case LTC3676_BUCK1:
+	case LTC3676_BUCK2:
+	case LTC3676_BUCK3:
+	case LTC3676_BUCK4:
+	case LTC3676_LDOA:
+	case LTC3676_LDOB:
+	case LTC3676_SQD1:
+	case LTC3676_SQD2:
+	case LTC3676_CNTRL:
+	case LTC3676_DVB1A:
+	case LTC3676_DVB1B:
+	case LTC3676_DVB2A:
+	case LTC3676_DVB2B:
+	case LTC3676_DVB3A:
+	case LTC3676_DVB3B:
+	case LTC3676_DVB4A:
+	case LTC3676_DVB4B:
+	case LTC3676_MSKIRQ:
+	case LTC3676_MSKPG:
+	case LTC3676_USER:
+	case LTC3676_HRST:
+	case LTC3676_CLIRQ:
+		return true;
+	}
+	return false;
+}
+
+static bool ltc3676_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LTC3676_IRQSTAT:
+	case LTC3676_BUCK1:
+	case LTC3676_BUCK2:
+	case LTC3676_BUCK3:
+	case LTC3676_BUCK4:
+	case LTC3676_LDOA:
+	case LTC3676_LDOB:
+	case LTC3676_SQD1:
+	case LTC3676_SQD2:
+	case LTC3676_CNTRL:
+	case LTC3676_DVB1A:
+	case LTC3676_DVB1B:
+	case LTC3676_DVB2A:
+	case LTC3676_DVB2B:
+	case LTC3676_DVB3A:
+	case LTC3676_DVB3B:
+	case LTC3676_DVB4A:
+	case LTC3676_DVB4B:
+	case LTC3676_MSKIRQ:
+	case LTC3676_MSKPG:
+	case LTC3676_USER:
+	case LTC3676_HRST:
+	case LTC3676_CLIRQ:
+		return true;
+	}
+	return false;
+}
+
+static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LTC3676_IRQSTAT:
+	case LTC3676_PGSTATL:
+	case LTC3676_PGSTATRT:
+		return true;
+	}
+	return false;
+}
+
+static const struct regmap_config ltc3676_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.writeable_reg = ltc3676_writeable_reg,
+	.readable_reg = ltc3676_readable_reg,
+	.volatile_reg = ltc3676_volatile_reg,
+	.max_register = LTC3676_CLIRQ,
+	.use_single_rw = true,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static irqreturn_t ltc3676_isr(int irq, void *dev_id)
+{
+	struct ltc3676 *ltc3676 = dev_id;
+	struct device *dev = ltc3676->dev;
+	unsigned int i, irqstat, event;
+
+	regmap_read(ltc3676->regmap, LTC3676_IRQSTAT, &irqstat);
+
+	dev_dbg(dev, "irq%d irqstat=0x%02x\n", irq, irqstat);
+	if (irqstat & LTC3676_IRQSTAT_THERMAL_WARN) {
+		dev_warn(dev, "Over-temperature Warning\n");
+		event = REGULATOR_EVENT_OVER_TEMP;
+		for (i = 0; i < LTC3676_NUM_REGULATORS; i++)
+			regulator_notifier_call_chain(ltc3676->regulators[i],
+						      event, NULL);
+	}
+
+	if (irqstat & LTC3676_IRQSTAT_UNDERVOLT_WARN) {
+		dev_info(dev, "Undervoltage Warning\n");
+		event = REGULATOR_EVENT_UNDER_VOLTAGE;
+		for (i = 0; i < LTC3676_NUM_REGULATORS; i++)
+			regulator_notifier_call_chain(ltc3676->regulators[i],
+						      event, NULL);
+	}
+
+	/* Clear warning condition */
+	regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int ltc3676_regulator_probe(struct i2c_client *client,
+				    const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct regulator_init_data *init_data = dev_get_platdata(dev);
+	struct regulator_desc *descs;
+	struct ltc3676 *ltc3676;
+	int i, ret;
+
+	ltc3676 = devm_kzalloc(dev, sizeof(*ltc3676), GFP_KERNEL);
+	if (!ltc3676)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, ltc3676);
+	ltc3676->dev = dev;
+
+	descs = ltc3676->regulator_descs;
+	memcpy(descs, ltc3676_regulators, sizeof(ltc3676_regulators));
+	descs[LTC3676_LDO3].fixed_uV = 1800000; /* LDO3 is fixed 1.8V */
+
+	ltc3676->regmap = devm_regmap_init_i2c(client, &ltc3676_regmap_config);
+	if (IS_ERR(ltc3676->regmap)) {
+		ret = PTR_ERR(ltc3676->regmap);
+		dev_err(dev, "failed to initialize regmap: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < LTC3676_NUM_REGULATORS; i++) {
+		struct regulator_desc *desc = &ltc3676->regulator_descs[i];
+		struct regulator_config config = { };
+
+		if (init_data)
+			config.init_data = &init_data[i];
+
+		config.dev = dev;
+		config.driver_data = ltc3676;
+
+		ltc3676->regulators[i] = devm_regulator_register(dev, desc,
+								 &config);
+		if (IS_ERR(ltc3676->regulators[i])) {
+			ret = PTR_ERR(ltc3676->regulators[i]);
+			dev_err(dev, "failed to register regulator %s: %d\n",
+				desc->name, ret);
+			return ret;
+		}
+	}
+
+	regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
+	if (client->irq) {
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						ltc3676_isr,
+						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						client->name, ltc3676);
+		if (ret) {
+			dev_err(dev, "Failed to request IRQ: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id ltc3676_i2c_id[] = {
+	{ "ltc3676" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ltc3676_i2c_id);
+
+static struct i2c_driver ltc3676_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+	},
+	.probe = ltc3676_regulator_probe,
+	.id_table = ltc3676_i2c_id,
+};
+module_i2c_driver(ltc3676_driver);
+
+MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
+MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC1376");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/max14577-regulator.c b/drivers/regulator/max14577-regulator.c
index b2daa6641417..c9ff26199711 100644
--- a/drivers/regulator/max14577-regulator.c
+++ b/drivers/regulator/max14577-regulator.c
@@ -2,7 +2,7 @@
  * max14577.c - Regulator driver for the Maxim 14577/77836
  *
  * Copyright (C) 2013,2014 Samsung Electronics
- * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ * Krzysztof Kozlowski <krzk@kernel.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -331,7 +331,7 @@ static void __exit max14577_regulator_exit(void)
 }
 module_exit(max14577_regulator_exit);
 
-MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
 MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:max14577-regulator");
diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
index 321e804aeab0..a1b49a6d538f 100644
--- a/drivers/regulator/max77620-regulator.c
+++ b/drivers/regulator/max77620-regulator.c
@@ -123,6 +123,9 @@ static int max77620_regulator_set_fps_src(struct max77620_regulator *pmic,
 	unsigned int val;
 	int ret;
 
+	if (!rinfo)
+		return 0;
+
 	switch (fps_src) {
 	case MAX77620_FPS_SRC_0:
 	case MAX77620_FPS_SRC_1:
@@ -171,6 +174,9 @@ static int max77620_regulator_set_fps_slots(struct max77620_regulator *pmic,
 	int pd = rpdata->active_fps_pd_slot;
 	int ret = 0;
 
+	if (!rinfo)
+		return 0;
+
 	if (is_suspend) {
 		pu = rpdata->suspend_fps_pu_slot;
 		pd = rpdata->suspend_fps_pd_slot;
@@ -680,7 +686,6 @@ static struct max77620_regulator_info max77620_regs_info[MAX77620_NUM_REGS] = {
 	RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 1550000, 12500, 0x22, SD1),
 	RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE),
 	RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE),
-	RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE),
 
 	RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000),
 	RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000),
diff --git a/drivers/regulator/max77693-regulator.c b/drivers/regulator/max77693-regulator.c
index de730fd3f8a5..cfbb9512e486 100644
--- a/drivers/regulator/max77693-regulator.c
+++ b/drivers/regulator/max77693-regulator.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2013-2015 Samsung Electronics
  * Jonghwa Lee <jonghwa3.lee@samsung.com>
- * Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
+ * Krzysztof Kozlowski <krzk@kernel.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -314,5 +314,5 @@ module_exit(max77693_pmic_cleanup);
 
 MODULE_DESCRIPTION("MAXIM 77693/77843 regulator driver");
 MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
-MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski.k@gmail.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index 08d2f13eca00..e0c747aa9f85 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -271,22 +271,18 @@ static int max8973_set_ramp_delay(struct regulator_dev *rdev,
 	struct max8973_chip *max = rdev_get_drvdata(rdev);
 	unsigned int control;
 	int ret;
-	int ret_val;
 
 	/* Set ramp delay */
-	if (ramp_delay < 25000) {
+	if (ramp_delay <= 12000)
 		control = MAX8973_RAMP_12mV_PER_US;
-		ret_val = 12000;
-	} else if (ramp_delay < 50000) {
+	else if (ramp_delay <= 25000)
 		control = MAX8973_RAMP_25mV_PER_US;
-		ret_val = 25000;
-	} else if (ramp_delay < 200000) {
+	else if (ramp_delay <= 50000)
 		control = MAX8973_RAMP_50mV_PER_US;
-		ret_val = 50000;
-	} else {
+	else if (ramp_delay <= 200000)
 		control = MAX8973_RAMP_200mV_PER_US;
-		ret_val = 200000;
-	}
+	else
+		return -EINVAL;
 
 	ret = regmap_update_bits(max->regmap, MAX8973_CONTROL1,
 			MAX8973_RAMP_MASK, control);
@@ -499,7 +495,8 @@ static irqreturn_t max8973_thermal_irq(int irq, void *data)
 {
 	struct max8973_chip *mchip = data;
 
-	thermal_zone_device_update(mchip->tz_device);
+	thermal_zone_device_update(mchip->tz_device,
+				   THERMAL_EVENT_UNSPECIFIED);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c
new file mode 100644
index 000000000000..b7b9670f0979
--- /dev/null
+++ b/drivers/regulator/mt6323-regulator.c
@@ -0,0 +1,425 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6323-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6323_LDO_MODE_NORMAL	0
+#define MT6323_LDO_MODE_LP	1
+
+/*
+ * MT6323 regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ */
+struct mt6323_regulator_info {
+	struct regulator_desc desc;
+	u32 qi;
+	u32 vselon_reg;
+	u32 vselctrl_reg;
+	u32 vselctrl_mask;
+	u32 modeset_reg;
+	u32 modeset_mask;
+};
+
+#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
+		vosel, vosel_mask, voselon, vosel_ctrl)			\
+[MT6323_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6323_volt_range_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6323_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = (max - min)/step + 1,			\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(0),					\
+	},								\
+	.qi = BIT(13),							\
+	.vselon_reg = voselon,						\
+	.vselctrl_reg = vosel_ctrl,					\
+	.vselctrl_mask = BIT(1),					\
+}
+
+#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
+		vosel_mask, _modeset_reg, _modeset_mask)		\
+[MT6323_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6323_volt_table_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6323_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt,		\
+		_modeset_reg, _modeset_mask)				\
+[MT6323_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6323_volt_fixed_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6323_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = 1,					\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+		.min_uV = volt,						\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+static const struct regulator_linear_range buck_volt_range1[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range2[] = {
+	REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500),
+};
+
+static const struct regulator_linear_range buck_volt_range3[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
+};
+
+static const u32 ldo_volt_table1[] = {
+	3300000, 3400000, 3500000, 3600000,
+};
+
+static const u32 ldo_volt_table2[] = {
+	1500000, 1800000, 2500000, 2800000,
+};
+
+static const u32 ldo_volt_table3[] = {
+	1800000, 3300000,
+};
+
+static const u32 ldo_volt_table4[] = {
+	3000000, 3300000,
+};
+
+static const u32 ldo_volt_table5[] = {
+	1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000,
+};
+
+static const u32 ldo_volt_table6[] = {
+	1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000,
+};
+
+static const u32 ldo_volt_table7[] = {
+	1200000, 1300000, 1500000, 1800000,
+};
+
+static const u32 ldo_volt_table8[] = {
+	1800000, 3000000,
+};
+
+static const u32 ldo_volt_table9[] = {
+	1200000, 1350000, 1500000, 1800000,
+};
+
+static const u32 ldo_volt_table10[] = {
+	1200000, 1300000, 1500000, 1800000,
+};
+
+static int mt6323_get_status(struct regulator_dev *rdev)
+{
+	int ret;
+	u32 regval;
+	struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+	ret = regmap_read(rdev->regmap, info->desc.enable_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	int ret, val = 0;
+	struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	switch (mode) {
+	case REGULATOR_MODE_STANDBY:
+		val = MT6323_LDO_MODE_LP;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6323_LDO_MODE_NORMAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val <<= ffs(info->modeset_mask) - 1;
+
+	ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+				  info->modeset_mask, val);
+
+	return ret;
+}
+
+static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	unsigned int mode;
+	int ret;
+	struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= info->modeset_mask;
+	val >>= ffs(info->modeset_mask) - 1;
+
+	if (val & 0x1)
+		mode = REGULATOR_MODE_STANDBY;
+	else
+		mode = REGULATOR_MODE_NORMAL;
+
+	return mode;
+}
+
+static const struct regulator_ops mt6323_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6323_get_status,
+};
+
+static const struct regulator_ops mt6323_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6323_get_status,
+	.set_mode = mt6323_ldo_set_mode,
+	.get_mode = mt6323_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6323_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6323_get_status,
+	.set_mode = mt6323_ldo_set_mode,
+	.get_mode = mt6323_ldo_get_mode,
+};
+
+/* The array is indexed by id(MT6323_ID_XXX) */
+static struct mt6323_regulator_info mt6323_regulators[] = {
+	MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250,
+		buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f,
+		MT6323_VPROC_CON10, MT6323_VPROC_CON5),
+	MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500,
+		buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f,
+		MT6323_VSYS_CON10, MT6323_VSYS_CON5),
+	MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
+		buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9,
+		0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5),
+	MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000,
+		MT6323_ANALDO_CON1, 0x2),
+	MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000,
+		MT6323_ANALDO_CON20, 0x2),
+	MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1,
+		MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC,
+		MT6323_ANALDO_CON21, 0x2),
+	MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1,
+		MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC,
+		MT6323_ANALDO_CON21, 0x2),
+	MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000,
+		MT6323_ANALDO_CON2, 0x2),
+	MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2,
+		MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0),
+	MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000,
+		MT6323_DIGLDO_CON0, 0x2),
+	MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000,
+		MT6323_DIGLDO_CON2, 0x2),
+	MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3,
+		MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10,
+		MT6323_DIGLDO_CON3, 0x2),
+	MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4,
+		MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80,
+		MT6323_DIGLDO_CON5, 0x2),
+	MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4,
+		MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80,
+		MT6323_DIGLDO_CON6, 0x2),
+	MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5,
+		MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0,
+		MT6323_DIGLDO_CON7, 0x2),
+	MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6,
+		MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0,
+		MT6323_DIGLDO_CON8, 0x2),
+	MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7,
+		MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60,
+		MT6323_DIGLDO_CON9, 0x2),
+	MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000,
+		MT6323_DIGLDO_CON11, 0x2),
+	MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8,
+		MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20,
+		MT6323_DIGLDO_CON13, 0x2),
+	MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8,
+		MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20,
+		MT6323_DIGLDO_CON14, 0x2),
+	MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000,
+		-1, 0),
+	MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5,
+		MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0,
+		MT6323_DIGLDO_CON31, 0x2),
+	MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5,
+		MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0,
+		MT6323_DIGLDO_CON39, 0x2),
+	MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000,
+		MT6323_DIGLDO_CON45, 0x2),
+	MT6323_LDO("ldo_vm", VM, ldo_volt_table9,
+		MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30,
+		MT6323_DIGLDO_CON47, 0x2),
+	MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000,
+		MT6323_DIGLDO_CON49, 0x2),
+	MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10,
+		MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60,
+		MT6323_DIGLDO_CON51, 0x2),
+	MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000,
+		MT6323_DIGLDO_CON53, 0x2),
+};
+
+static int mt6323_set_buck_vosel_reg(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent);
+	int i;
+	u32 regval;
+
+	for (i = 0; i < MT6323_MAX_REGULATOR; i++) {
+		if (mt6323_regulators[i].vselctrl_reg) {
+			if (regmap_read(mt6323->regmap,
+				mt6323_regulators[i].vselctrl_reg,
+				&regval) < 0) {
+				dev_err(&pdev->dev,
+					"Failed to read buck ctrl\n");
+				return -EIO;
+			}
+
+			if (regval & mt6323_regulators[i].vselctrl_mask) {
+				mt6323_regulators[i].desc.vsel_reg =
+				mt6323_regulators[i].vselon_reg;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int mt6323_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+	u32 reg_value;
+
+	/* Query buck controller to select activated voltage register part */
+	if (mt6323_set_buck_vosel_reg(pdev))
+		return -EIO;
+
+	/* Read PMIC chip revision to update constraints and voltage table */
+	if (regmap_read(mt6323->regmap, MT6323_CID, &reg_value) < 0) {
+		dev_err(&pdev->dev, "Failed to read Chip ID\n");
+		return -EIO;
+	}
+	dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value);
+
+	for (i = 0; i < MT6323_MAX_REGULATOR; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6323_regulators[i];
+		config.regmap = mt6323->regmap;
+		rdev = devm_regulator_register(&pdev->dev,
+				&mt6323_regulators[i].desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6323_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static const struct platform_device_id mt6323_platform_ids[] = {
+	{"mt6323-regulator", 0},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6323_platform_ids);
+
+static struct platform_driver mt6323_regulator_driver = {
+	.driver = {
+		.name = "mt6323-regulator",
+	},
+	.probe = mt6323_regulator_probe,
+	.id_table = mt6323_platform_ids,
+};
+
+module_platform_driver(mt6323_regulator_driver);
+
+MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6323 PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c
index 17a5b6c2d6a9..c6c6aa85e4e8 100644
--- a/drivers/regulator/mt6397-regulator.c
+++ b/drivers/regulator/mt6397-regulator.c
@@ -23,6 +23,9 @@
 #include <linux/regulator/mt6397-regulator.h>
 #include <linux/regulator/of_regulator.h>
 
+#define MT6397_BUCK_MODE_AUTO	0
+#define MT6397_BUCK_MODE_FORCE_PWM	1
+
 /*
  * MT6397 regulators' information
  *
@@ -38,10 +41,14 @@ struct mt6397_regulator_info {
 	u32 vselon_reg;
 	u32 vselctrl_reg;
 	u32 vselctrl_mask;
+	u32 modeset_reg;
+	u32 modeset_mask;
+	u32 modeset_shift;
 };
 
 #define MT6397_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
-		vosel, vosel_mask, voselon, vosel_ctrl)			\
+		vosel, vosel_mask, voselon, vosel_ctrl, _modeset_reg,	\
+		_modeset_shift)					\
 [MT6397_ID_##vreg] = {							\
 	.desc = {							\
 		.name = #vreg,						\
@@ -62,6 +69,9 @@ struct mt6397_regulator_info {
 	.vselon_reg = voselon,						\
 	.vselctrl_reg = vosel_ctrl,					\
 	.vselctrl_mask = BIT(1),					\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = BIT(_modeset_shift),				\
+	.modeset_shift = _modeset_shift					\
 }
 
 #define MT6397_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
@@ -145,6 +155,63 @@ static const u32 ldo_volt_table7[] = {
 	1300000, 1500000, 1800000, 2000000, 2500000, 2800000, 3000000, 3300000,
 };
 
+static int mt6397_regulator_set_mode(struct regulator_dev *rdev,
+				     unsigned int mode)
+{
+	struct mt6397_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret, val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = MT6397_BUCK_MODE_FORCE_PWM;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6397_BUCK_MODE_AUTO;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err_mode;
+	}
+
+	dev_dbg(&rdev->dev, "mt6397 buck set_mode %#x, %#x, %#x, %#x\n",
+		info->modeset_reg, info->modeset_mask,
+		info->modeset_shift, val);
+
+	val <<= info->modeset_shift;
+	ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+				 info->modeset_mask, val);
+err_mode:
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to set mt6397 buck mode: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static unsigned int mt6397_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct mt6397_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret, regval;
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to get mt6397 buck mode: %d\n", ret);
+		return ret;
+	}
+
+	switch ((regval & info->modeset_mask) >> info->modeset_shift) {
+	case MT6397_BUCK_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	case MT6397_BUCK_MODE_FORCE_PWM:
+		return REGULATOR_MODE_FAST;
+	default:
+		return -EINVAL;
+	}
+}
+
 static int mt6397_get_status(struct regulator_dev *rdev)
 {
 	int ret;
@@ -160,7 +227,7 @@ static int mt6397_get_status(struct regulator_dev *rdev)
 	return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
 }
 
-static struct regulator_ops mt6397_volt_range_ops = {
+static const struct regulator_ops mt6397_volt_range_ops = {
 	.list_voltage = regulator_list_voltage_linear_range,
 	.map_voltage = regulator_map_voltage_linear_range,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -170,9 +237,11 @@ static struct regulator_ops mt6397_volt_range_ops = {
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.get_status = mt6397_get_status,
+	.set_mode = mt6397_regulator_set_mode,
+	.get_mode = mt6397_regulator_get_mode,
 };
 
-static struct regulator_ops mt6397_volt_table_ops = {
+static const struct regulator_ops mt6397_volt_table_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_iterate,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -184,7 +253,7 @@ static struct regulator_ops mt6397_volt_table_ops = {
 	.get_status = mt6397_get_status,
 };
 
-static struct regulator_ops mt6397_volt_fixed_ops = {
+static const struct regulator_ops mt6397_volt_fixed_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -196,28 +265,30 @@ static struct regulator_ops mt6397_volt_fixed_ops = {
 static struct mt6397_regulator_info mt6397_regulators[] = {
 	MT6397_BUCK("buck_vpca15", VPCA15, 700000, 1493750, 6250,
 		buck_volt_range1, MT6397_VCA15_CON7, MT6397_VCA15_CON9, 0x7f,
-		MT6397_VCA15_CON10, MT6397_VCA15_CON5),
+		MT6397_VCA15_CON10, MT6397_VCA15_CON5, MT6397_VCA15_CON2, 11),
 	MT6397_BUCK("buck_vpca7", VPCA7, 700000, 1493750, 6250,
 		buck_volt_range1, MT6397_VPCA7_CON7, MT6397_VPCA7_CON9, 0x7f,
-		MT6397_VPCA7_CON10, MT6397_VPCA7_CON5),
+		MT6397_VPCA7_CON10, MT6397_VPCA7_CON5, MT6397_VPCA7_CON2, 8),
 	MT6397_BUCK("buck_vsramca15", VSRAMCA15, 700000, 1493750, 6250,
 		buck_volt_range1, MT6397_VSRMCA15_CON7, MT6397_VSRMCA15_CON9,
-		0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5),
+		0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5,
+		MT6397_VSRMCA15_CON2, 8),
 	MT6397_BUCK("buck_vsramca7", VSRAMCA7, 700000, 1493750, 6250,
 		buck_volt_range1, MT6397_VSRMCA7_CON7, MT6397_VSRMCA7_CON9,
-		0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5),
+		0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5,
+		MT6397_VSRMCA7_CON2, 8),
 	MT6397_BUCK("buck_vcore", VCORE, 700000, 1493750, 6250,
 		buck_volt_range1, MT6397_VCORE_CON7, MT6397_VCORE_CON9, 0x7f,
-		MT6397_VCORE_CON10, MT6397_VCORE_CON5),
+		MT6397_VCORE_CON10, MT6397_VCORE_CON5, MT6397_VCORE_CON2, 8),
 	MT6397_BUCK("buck_vgpu", VGPU, 700000, 1493750, 6250, buck_volt_range1,
 		MT6397_VGPU_CON7, MT6397_VGPU_CON9, 0x7f,
-		MT6397_VGPU_CON10, MT6397_VGPU_CON5),
+		MT6397_VGPU_CON10, MT6397_VGPU_CON5, MT6397_VGPU_CON2, 8),
 	MT6397_BUCK("buck_vdrm", VDRM, 800000, 1593750, 6250, buck_volt_range2,
 		MT6397_VDRM_CON7, MT6397_VDRM_CON9, 0x7f,
-		MT6397_VDRM_CON10, MT6397_VDRM_CON5),
+		MT6397_VDRM_CON10, MT6397_VDRM_CON5, MT6397_VDRM_CON2, 8),
 	MT6397_BUCK("buck_vio18", VIO18, 1500000, 2120000, 20000,
 		buck_volt_range3, MT6397_VIO18_CON7, MT6397_VIO18_CON9, 0x1f,
-		MT6397_VIO18_CON10, MT6397_VIO18_CON5),
+		MT6397_VIO18_CON10, MT6397_VIO18_CON5, MT6397_VIO18_CON2, 8),
 	MT6397_REG_FIXED("ldo_vtcxo", VTCXO, MT6397_ANALDO_CON0, 10, 2800000),
 	MT6397_REG_FIXED("ldo_va28", VA28, MT6397_ANALDO_CON1, 14, 2800000),
 	MT6397_LDO("ldo_vcama", VCAMA, ldo_volt_table1,
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index cd828dbf9d52..4f613ec99500 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -163,6 +163,9 @@ static void of_get_regulation_constraints(struct device_node *np,
 					"regulator-suspend-microvolt", &pval))
 			suspend_state->uV = pval;
 
+		if (i == PM_SUSPEND_MEM)
+			constraints->initial_state = PM_SUSPEND_MEM;
+
 		of_node_put(suspend_np);
 		suspend_state = NULL;
 		suspend_np = NULL;
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 2a44e5dd9c2a..cb18b5c4f2db 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -70,6 +70,7 @@ struct pfuze_chip {
 	struct device *dev;
 	struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
 	struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR];
+	struct pfuze_regulator *pfuze_regulators;
 };
 
 static const int pfuze100_swbst[] = {
@@ -334,8 +335,6 @@ static struct pfuze_regulator pfuze3000_regulators[] = {
 	PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
 };
 
-static struct pfuze_regulator *pfuze_regulators;
-
 #ifdef CONFIG_OF
 /* PFUZE100 */
 static struct of_regulator_match pfuze100_matches[] = {
@@ -563,21 +562,21 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 	/* use the right regulators after identify the right device */
 	switch (pfuze_chip->chip_id) {
 	case PFUZE3000:
-		pfuze_regulators = pfuze3000_regulators;
+		pfuze_chip->pfuze_regulators = pfuze3000_regulators;
 		regulator_num = ARRAY_SIZE(pfuze3000_regulators);
 		sw_check_start = PFUZE3000_SW2;
 		sw_check_end = PFUZE3000_SW2;
 		sw_hi = 1 << 3;
 		break;
 	case PFUZE200:
-		pfuze_regulators = pfuze200_regulators;
+		pfuze_chip->pfuze_regulators = pfuze200_regulators;
 		regulator_num = ARRAY_SIZE(pfuze200_regulators);
 		sw_check_start = PFUZE200_SW2;
 		sw_check_end = PFUZE200_SW3B;
 		break;
 	case PFUZE100:
 	default:
-		pfuze_regulators = pfuze100_regulators;
+		pfuze_chip->pfuze_regulators = pfuze100_regulators;
 		regulator_num = ARRAY_SIZE(pfuze100_regulators);
 		sw_check_start = PFUZE100_SW2;
 		sw_check_end = PFUZE100_SW4;
@@ -587,7 +586,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		(pfuze_chip->chip_id == PFUZE100) ? "100" :
 		((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000"));
 
-	memcpy(pfuze_chip->regulator_descs, pfuze_regulators,
+	memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators,
 		sizeof(pfuze_chip->regulator_descs));
 
 	ret = pfuze_parse_regulators_dt(pfuze_chip);
@@ -631,7 +630,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 			devm_regulator_register(&client->dev, desc, &config);
 		if (IS_ERR(pfuze_chip->regulators[i])) {
 			dev_err(&client->dev, "register regulator%s failed\n",
-				pfuze_regulators[i].desc.name);
+				pfuze_chip->pfuze_regulators[i].desc.name);
 			return PTR_ERR(pfuze_chip->regulators[i]);
 		}
 	}
@@ -650,5 +649,5 @@ static struct i2c_driver pfuze_driver = {
 module_i2c_driver(pfuze_driver);
 
 MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
-MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/PFUZE200 PMIC");
+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000 PMIC");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/pv88060-regulator.c b/drivers/regulator/pv88060-regulator.c
index c448b727f5f8..6c4afc73ecac 100644
--- a/drivers/regulator/pv88060-regulator.c
+++ b/drivers/regulator/pv88060-regulator.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -25,8 +24,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/regulator/of_regulator.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
 #include "pv88060-regulator.h"
 
 #define PV88060_MAX_REGULATORS	14
diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c
index d7107566c429..954a20eeb26f 100644
--- a/drivers/regulator/pv88080-regulator.c
+++ b/drivers/regulator/pv88080-regulator.c
@@ -14,9 +14,9 @@
  */
 
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/regulator/driver.h>
@@ -25,11 +25,9 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/regulator/of_regulator.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
 #include "pv88080-regulator.h"
 
-#define PV88080_MAX_REGULATORS	3
+#define PV88080_MAX_REGULATORS	4
 
 /* PV88080 REGULATOR IDs */
 enum {
@@ -37,6 +35,12 @@ enum {
 	PV88080_ID_BUCK1,
 	PV88080_ID_BUCK2,
 	PV88080_ID_BUCK3,
+	PV88080_ID_HVBUCK,
+};
+
+enum pv88080_types {
+	TYPE_PV88080_AA,
+	TYPE_PV88080_BA,
 };
 
 struct pv88080_regulator {
@@ -45,7 +49,8 @@ struct pv88080_regulator {
 	unsigned int n_current_limits;
 	const int *current_limits;
 	unsigned int limit_mask;
-	unsigned int conf;
+	unsigned int mode_reg;
+	unsigned int limit_reg;
 	unsigned int conf2;
 	unsigned int conf5;
 };
@@ -54,6 +59,8 @@ struct pv88080 {
 	struct device *dev;
 	struct regmap *regmap;
 	struct regulator_dev *rdev[PV88080_MAX_REGULATORS];
+	unsigned long type;
+	const struct pv88080_compatible_regmap *regmap_config;
 };
 
 struct pv88080_buck_voltage {
@@ -62,6 +69,30 @@ struct pv88080_buck_voltage {
 	int uV_step;
 };
 
+struct pv88080_buck_regmap {
+	/* REGS */
+	int buck_enable_reg;
+	int buck_vsel_reg;
+	int buck_mode_reg;
+	int buck_limit_reg;
+	int buck_vdac_range_reg;
+	int buck_vrange_gain_reg;
+	/* MASKS */
+	int buck_enable_mask;
+	int buck_vsel_mask;
+	int buck_limit_mask;
+};
+
+struct pv88080_compatible_regmap {
+	/* BUCK1, 2, 3 */
+	struct pv88080_buck_regmap buck_regmap[PV88080_MAX_REGULATORS-1];
+	/* HVBUCK */
+	int hvbuck_enable_reg;
+	int hvbuck_vsel_reg;
+	int hvbuck_enable_mask;
+	int hvbuck_vsel_mask;
+};
+
 static const struct regmap_config pv88080_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -92,13 +123,111 @@ static const struct pv88080_buck_voltage pv88080_buck_vol[2] = {
 	},
 };
 
+static const struct pv88080_compatible_regmap pv88080_aa_regs = {
+	/* BUCK1 */
+	.buck_regmap[0] = {
+		.buck_enable_reg      = PV88080AA_REG_BUCK1_CONF0,
+		.buck_vsel_reg        = PV88080AA_REG_BUCK1_CONF0,
+		.buck_mode_reg        = PV88080AA_REG_BUCK1_CONF1,
+		.buck_limit_reg       = PV88080AA_REG_BUCK1_CONF1,
+		.buck_vdac_range_reg  = PV88080AA_REG_BUCK1_CONF2,
+		.buck_vrange_gain_reg = PV88080AA_REG_BUCK1_CONF5,
+		.buck_enable_mask     = PV88080_BUCK1_EN,
+		.buck_vsel_mask       = PV88080_VBUCK1_MASK,
+		.buck_limit_mask      = PV88080_BUCK1_ILIM_MASK,
+	},
+	/* BUCK2 */
+	.buck_regmap[1] = {
+		.buck_enable_reg      = PV88080AA_REG_BUCK2_CONF0,
+		.buck_vsel_reg        = PV88080AA_REG_BUCK2_CONF0,
+		.buck_mode_reg        = PV88080AA_REG_BUCK2_CONF1,
+		.buck_limit_reg	      = PV88080AA_REG_BUCK2_CONF1,
+		.buck_vdac_range_reg  = PV88080AA_REG_BUCK2_CONF2,
+		.buck_vrange_gain_reg = PV88080AA_REG_BUCK2_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK2_EN,
+		.buck_vsel_mask       = PV88080_VBUCK2_MASK,
+		.buck_limit_mask      = PV88080_BUCK2_ILIM_MASK,
+	},
+	/* BUCK3 */
+	.buck_regmap[2] = {
+		.buck_enable_reg	  = PV88080AA_REG_BUCK3_CONF0,
+		.buck_vsel_reg        = PV88080AA_REG_BUCK3_CONF0,
+		.buck_mode_reg        = PV88080AA_REG_BUCK3_CONF1,
+		.buck_limit_reg	      = PV88080AA_REG_BUCK3_CONF1,
+		.buck_vdac_range_reg  = PV88080AA_REG_BUCK3_CONF2,
+		.buck_vrange_gain_reg = PV88080AA_REG_BUCK3_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK3_EN,
+		.buck_vsel_mask       = PV88080_VBUCK3_MASK,
+		.buck_limit_mask      = PV88080_BUCK3_ILIM_MASK,
+	},
+	/* HVBUCK */
+	.hvbuck_enable_reg	      = PV88080AA_REG_HVBUCK_CONF2,
+	.hvbuck_vsel_reg          = PV88080AA_REG_HVBUCK_CONF1,
+	.hvbuck_enable_mask       = PV88080_HVBUCK_EN,
+	.hvbuck_vsel_mask         = PV88080_VHVBUCK_MASK,
+};
+
+static const struct pv88080_compatible_regmap pv88080_ba_regs = {
+	/* BUCK1 */
+	.buck_regmap[0] = {
+		.buck_enable_reg	  = PV88080BA_REG_BUCK1_CONF0,
+		.buck_vsel_reg        = PV88080BA_REG_BUCK1_CONF0,
+		.buck_mode_reg        = PV88080BA_REG_BUCK1_CONF1,
+		.buck_limit_reg       = PV88080BA_REG_BUCK1_CONF1,
+		.buck_vdac_range_reg  = PV88080BA_REG_BUCK1_CONF2,
+		.buck_vrange_gain_reg = PV88080BA_REG_BUCK1_CONF5,
+		.buck_enable_mask     = PV88080_BUCK1_EN,
+		.buck_vsel_mask       = PV88080_VBUCK1_MASK,
+		.buck_limit_mask	  = PV88080_BUCK1_ILIM_MASK,
+	},
+	/* BUCK2 */
+	.buck_regmap[1] = {
+		.buck_enable_reg	  = PV88080BA_REG_BUCK2_CONF0,
+		.buck_vsel_reg        = PV88080BA_REG_BUCK2_CONF0,
+		.buck_mode_reg        = PV88080BA_REG_BUCK2_CONF1,
+		.buck_limit_reg	      = PV88080BA_REG_BUCK2_CONF1,
+		.buck_vdac_range_reg  = PV88080BA_REG_BUCK2_CONF2,
+		.buck_vrange_gain_reg = PV88080BA_REG_BUCK2_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK2_EN,
+		.buck_vsel_mask       = PV88080_VBUCK2_MASK,
+		.buck_limit_mask	  = PV88080_BUCK2_ILIM_MASK,
+	},
+	/* BUCK3 */
+	.buck_regmap[2] = {
+		.buck_enable_reg	  = PV88080BA_REG_BUCK3_CONF0,
+		.buck_vsel_reg        = PV88080BA_REG_BUCK3_CONF0,
+		.buck_mode_reg        = PV88080BA_REG_BUCK3_CONF1,
+		.buck_limit_reg	      = PV88080BA_REG_BUCK3_CONF1,
+		.buck_vdac_range_reg  = PV88080BA_REG_BUCK3_CONF2,
+		.buck_vrange_gain_reg = PV88080BA_REG_BUCK3_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK3_EN,
+		.buck_vsel_mask       = PV88080_VBUCK3_MASK,
+		.buck_limit_mask	  = PV88080_BUCK3_ILIM_MASK,
+	},
+	/* HVBUCK */
+	.hvbuck_enable_reg	      = PV88080BA_REG_HVBUCK_CONF2,
+	.hvbuck_vsel_reg          = PV88080BA_REG_HVBUCK_CONF1,
+	.hvbuck_enable_mask       = PV88080_HVBUCK_EN,
+	.hvbuck_vsel_mask		  = PV88080_VHVBUCK_MASK,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id pv88080_dt_ids[] = {
+	{ .compatible = "pvs,pv88080",    .data = (void *)TYPE_PV88080_AA },
+	{ .compatible = "pvs,pv88080-aa", .data = (void *)TYPE_PV88080_AA },
+	{ .compatible = "pvs,pv88080-ba", .data = (void *)TYPE_PV88080_BA },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pv88080_dt_ids);
+#endif
+
 static unsigned int pv88080_buck_get_mode(struct regulator_dev *rdev)
 {
 	struct pv88080_regulator *info = rdev_get_drvdata(rdev);
 	unsigned int data;
 	int ret, mode = 0;
 
-	ret = regmap_read(rdev->regmap, info->conf, &data);
+	ret = regmap_read(rdev->regmap, info->mode_reg, &data);
 	if (ret < 0)
 		return ret;
 
@@ -139,7 +268,7 @@ static int pv88080_buck_set_mode(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	return regmap_update_bits(rdev->regmap, info->conf,
+	return regmap_update_bits(rdev->regmap, info->mode_reg,
 					PV88080_BUCK1_MODE_MASK, val);
 }
 
@@ -154,7 +283,7 @@ static int pv88080_set_current_limit(struct regulator_dev *rdev, int min,
 		if (min <= info->current_limits[i]
 			&& max >= info->current_limits[i]) {
 				return regmap_update_bits(rdev->regmap,
-					info->conf,
+					info->limit_reg,
 					info->limit_mask,
 					i << PV88080_BUCK1_ILIM_SHIFT);
 		}
@@ -169,7 +298,7 @@ static int pv88080_get_current_limit(struct regulator_dev *rdev)
 	unsigned int data;
 	int ret;
 
-	ret = regmap_read(rdev->regmap, info->conf, &data);
+	ret = regmap_read(rdev->regmap, info->limit_reg, &data);
 	if (ret < 0)
 		return ret;
 
@@ -190,6 +319,15 @@ static struct regulator_ops pv88080_buck_ops = {
 	.get_current_limit = pv88080_get_current_limit,
 };
 
+static struct regulator_ops pv88080_hvbuck_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+};
+
 #define PV88080_BUCK(chip, regl_name, min, step, max, limits_array) \
 {\
 	.desc	=	{\
@@ -203,17 +341,25 @@ static struct regulator_ops pv88080_buck_ops = {
 		.min_uV = min, \
 		.uV_step = step, \
 		.n_voltages = ((max) - (min))/(step) + 1, \
-		.enable_reg = PV88080_REG_##regl_name##_CONF0, \
-		.enable_mask = PV88080_##regl_name##_EN, \
-		.vsel_reg = PV88080_REG_##regl_name##_CONF0, \
-		.vsel_mask = PV88080_V##regl_name##_MASK, \
 	},\
 	.current_limits = limits_array, \
 	.n_current_limits = ARRAY_SIZE(limits_array), \
-	.limit_mask = PV88080_##regl_name##_ILIM_MASK, \
-	.conf = PV88080_REG_##regl_name##_CONF1, \
-	.conf2 = PV88080_REG_##regl_name##_CONF2, \
-	.conf5 = PV88080_REG_##regl_name##_CONF5, \
+}
+
+#define PV88080_HVBUCK(chip, regl_name, min, step, max) \
+{\
+	.desc	=	{\
+		.id = chip##_ID_##regl_name,\
+		.name = __stringify(chip##_##regl_name),\
+		.of_match = of_match_ptr(#regl_name),\
+		.regulators_node = of_match_ptr("regulators"),\
+		.type = REGULATOR_VOLTAGE,\
+		.owner = THIS_MODULE,\
+		.ops = &pv88080_hvbuck_ops,\
+		.min_uV = min, \
+		.uV_step = step, \
+		.n_voltages = ((max) - (min))/(step) + 1, \
+	},\
 }
 
 static struct pv88080_regulator pv88080_regulator_info[] = {
@@ -223,6 +369,7 @@ static struct pv88080_regulator pv88080_regulator_info[] = {
 		pv88080_buck23_limits),
 	PV88080_BUCK(PV88080, BUCK3, 600000, 6250, 1393750,
 		pv88080_buck23_limits),
+	PV88080_HVBUCK(PV88080, HVBUCK, 0, 5000, 1275000),
 };
 
 static irqreturn_t pv88080_irq_handler(int irq, void *data)
@@ -283,6 +430,8 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
 {
 	struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
 	struct pv88080 *chip;
+	const struct pv88080_compatible_regmap *regmap_config;
+	const struct of_device_id *match;
 	struct regulator_config config = { };
 	int i, error, ret;
 	unsigned int conf2, conf5;
@@ -300,6 +449,17 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
 		return error;
 	}
 
+	if (i2c->dev.of_node) {
+		match = of_match_node(pv88080_dt_ids, i2c->dev.of_node);
+		if (!match) {
+			dev_err(chip->dev, "Failed to get of_match_node\n");
+			return -EINVAL;
+		}
+		chip->type = (unsigned long)match->data;
+	} else {
+		chip->type = id->driver_data;
+	}
+
 	i2c_set_clientdata(i2c, chip);
 
 	if (i2c->irq != 0) {
@@ -339,31 +499,58 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
 				"Failed to update mask reg: %d\n", ret);
 			return ret;
 		}
-
 	} else {
 		dev_warn(chip->dev, "No IRQ configured\n");
 	}
 
+	switch (chip->type) {
+	case TYPE_PV88080_AA:
+		chip->regmap_config = &pv88080_aa_regs;
+		break;
+	case TYPE_PV88080_BA:
+		chip->regmap_config = &pv88080_ba_regs;
+		break;
+	}
+
+	regmap_config = chip->regmap_config;
 	config.dev = chip->dev;
 	config.regmap = chip->regmap;
 
-	for (i = 0; i < PV88080_MAX_REGULATORS; i++) {
+	/* Registeration for BUCK1, 2, 3 */
+	for (i = 0; i < PV88080_MAX_REGULATORS-1; i++) {
 		if (init_data)
 			config.init_data = &init_data[i];
 
+		pv88080_regulator_info[i].limit_reg
+			= regmap_config->buck_regmap[i].buck_limit_reg;
+		pv88080_regulator_info[i].limit_mask
+			= regmap_config->buck_regmap[i].buck_limit_mask;
+		pv88080_regulator_info[i].mode_reg
+			= regmap_config->buck_regmap[i].buck_mode_reg;
+		pv88080_regulator_info[i].conf2
+			= regmap_config->buck_regmap[i].buck_vdac_range_reg;
+		pv88080_regulator_info[i].conf5
+			= regmap_config->buck_regmap[i].buck_vrange_gain_reg;
+		pv88080_regulator_info[i].desc.enable_reg
+			= regmap_config->buck_regmap[i].buck_enable_reg;
+		pv88080_regulator_info[i].desc.enable_mask
+			= regmap_config->buck_regmap[i].buck_enable_mask;
+		pv88080_regulator_info[i].desc.vsel_reg
+			= regmap_config->buck_regmap[i].buck_vsel_reg;
+		pv88080_regulator_info[i].desc.vsel_mask
+			= regmap_config->buck_regmap[i].buck_vsel_mask;
+
 		ret = regmap_read(chip->regmap,
-			pv88080_regulator_info[i].conf2, &conf2);
+				pv88080_regulator_info[i].conf2, &conf2);
 		if (ret < 0)
 			return ret;
-
 		conf2 = ((conf2 >> PV88080_BUCK_VDAC_RANGE_SHIFT) &
 			PV88080_BUCK_VDAC_RANGE_MASK);
 
 		ret = regmap_read(chip->regmap,
-			pv88080_regulator_info[i].conf5, &conf5);
+				pv88080_regulator_info[i].conf5, &conf5);
 		if (ret < 0)
 			return ret;
-
 		conf5 = ((conf5 >> PV88080_BUCK_VRANGE_GAIN_SHIFT) &
 			PV88080_BUCK_VRANGE_GAIN_MASK);
 
@@ -386,23 +573,38 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
 		}
 	}
 
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_reg
+		= regmap_config->hvbuck_enable_reg;
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_mask
+		= regmap_config->hvbuck_enable_mask;
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_reg
+		= regmap_config->hvbuck_vsel_reg;
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_mask
+		= regmap_config->hvbuck_vsel_mask;
+
+	/* Registeration for HVBUCK */
+	if (init_data)
+		config.init_data = &init_data[PV88080_ID_HVBUCK];
+
+	config.driver_data = (void *)&pv88080_regulator_info[PV88080_ID_HVBUCK];
+	chip->rdev[PV88080_ID_HVBUCK] = devm_regulator_register(chip->dev,
+		&pv88080_regulator_info[PV88080_ID_HVBUCK].desc, &config);
+	if (IS_ERR(chip->rdev[PV88080_ID_HVBUCK])) {
+		dev_err(chip->dev, "Failed to register PV88080 regulator\n");
+		return PTR_ERR(chip->rdev[PV88080_ID_HVBUCK]);
+	}
+
 	return 0;
 }
 
 static const struct i2c_device_id pv88080_i2c_id[] = {
-	{"pv88080", 0},
+	{ "pv88080",    TYPE_PV88080_AA },
+	{ "pv88080-aa", TYPE_PV88080_AA },
+	{ "pv88080-ba", TYPE_PV88080_BA },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, pv88080_i2c_id);
 
-#ifdef CONFIG_OF
-static const struct of_device_id pv88080_dt_ids[] = {
-	{ .compatible = "pvs,pv88080", .data = &pv88080_i2c_id[0] },
-	{},
-};
-MODULE_DEVICE_TABLE(of, pv88080_dt_ids);
-#endif
-
 static struct i2c_driver pv88080_regulator_driver = {
 	.driver = {
 		.name = "pv88080",
diff --git a/drivers/regulator/pv88080-regulator.h b/drivers/regulator/pv88080-regulator.h
index 5e9afde606f4..ae25ff360e3d 100644
--- a/drivers/regulator/pv88080-regulator.h
+++ b/drivers/regulator/pv88080-regulator.h
@@ -17,55 +17,75 @@
 #define __PV88080_REGISTERS_H__
 
 /* System Control and Event Registers */
-#define	PV88080_REG_EVENT_A			0x04
-#define	PV88080_REG_MASK_A			0x09
-#define	PV88080_REG_MASK_B			0x0a
-#define	PV88080_REG_MASK_C			0x0b
-
-/* Regulator Registers */
-#define	PV88080_REG_BUCK1_CONF0			0x27
-#define	PV88080_REG_BUCK1_CONF1			0x28
-#define	PV88080_REG_BUCK1_CONF2			0x59
-#define	PV88080_REG_BUCK1_CONF5			0x5c
-#define	PV88080_REG_BUCK2_CONF0			0x29
-#define	PV88080_REG_BUCK2_CONF1			0x2a
-#define	PV88080_REG_BUCK2_CONF2			0x61
-#define	PV88080_REG_BUCK2_CONF5			0x64
-#define	PV88080_REG_BUCK3_CONF0			0x2b
-#define	PV88080_REG_BUCK3_CONF1			0x2c
-#define	PV88080_REG_BUCK3_CONF2			0x69
-#define	PV88080_REG_BUCK3_CONF5			0x6c
+#define	PV88080_REG_EVENT_A				0x04
+#define	PV88080_REG_MASK_A				0x09
+#define	PV88080_REG_MASK_B				0x0A
+#define	PV88080_REG_MASK_C				0x0B
+
+/* Regulator Registers - rev. AA */
+#define PV88080AA_REG_HVBUCK_CONF1		0x2D
+#define PV88080AA_REG_HVBUCK_CONF2		0x2E
+#define	PV88080AA_REG_BUCK1_CONF0		0x27
+#define	PV88080AA_REG_BUCK1_CONF1		0x28
+#define	PV88080AA_REG_BUCK1_CONF2		0x59
+#define	PV88080AA_REG_BUCK1_CONF5		0x5C
+#define	PV88080AA_REG_BUCK2_CONF0		0x29
+#define	PV88080AA_REG_BUCK2_CONF1		0x2A
+#define	PV88080AA_REG_BUCK2_CONF2		0x61
+#define	PV88080AA_REG_BUCK2_CONF5		0x64
+#define	PV88080AA_REG_BUCK3_CONF0		0x2B
+#define	PV88080AA_REG_BUCK3_CONF1		0x2C
+#define	PV88080AA_REG_BUCK3_CONF2		0x69
+#define	PV88080AA_REG_BUCK3_CONF5		0x6C
+
+/* Regulator Registers - rev. BA */
+#define	PV88080BA_REG_HVBUCK_CONF1		0x33
+#define	PV88080BA_REG_HVBUCK_CONF2		0x34
+#define	PV88080BA_REG_BUCK1_CONF0		0x2A
+#define	PV88080BA_REG_BUCK1_CONF1		0x2C
+#define	PV88080BA_REG_BUCK1_CONF2		0x5A
+#define	PV88080BA_REG_BUCK1_CONF5		0x5D
+#define	PV88080BA_REG_BUCK2_CONF0		0x2D
+#define	PV88080BA_REG_BUCK2_CONF1		0x2F
+#define	PV88080BA_REG_BUCK2_CONF2		0x63
+#define	PV88080BA_REG_BUCK2_CONF5		0x66
+#define	PV88080BA_REG_BUCK3_CONF0		0x30
+#define	PV88080BA_REG_BUCK3_CONF1		0x32
+#define	PV88080BA_REG_BUCK3_CONF2		0x6C
+#define	PV88080BA_REG_BUCK3_CONF5		0x6F
 
 /* PV88080_REG_EVENT_A (addr=0x04) */
 #define	PV88080_E_VDD_FLT				0x01
-#define	PV88080_E_OVER_TEMP			0x02
+#define	PV88080_E_OVER_TEMP				0x02
 
 /* PV88080_REG_MASK_A (addr=0x09) */
 #define	PV88080_M_VDD_FLT				0x01
-#define	PV88080_M_OVER_TEMP			0x02
+#define	PV88080_M_OVER_TEMP				0x02
 
-/* PV88080_REG_BUCK1_CONF0 (addr=0x27) */
+/* PV88080_REG_BUCK1_CONF0 (addr=0x27|0x2A) */
 #define	PV88080_BUCK1_EN				0x80
-#define PV88080_VBUCK1_MASK			0x7F
-/* PV88080_REG_BUCK2_CONF0 (addr=0x29) */
+#define PV88080_VBUCK1_MASK				0x7F
+
+/* PV88080_REG_BUCK2_CONF0 (addr=0x29|0x2D) */
 #define	PV88080_BUCK2_EN				0x80
-#define PV88080_VBUCK2_MASK			0x7F
-/* PV88080_REG_BUCK3_CONF0 (addr=0x2b) */
+#define PV88080_VBUCK2_MASK				0x7F
+
+/* PV88080_REG_BUCK3_CONF0 (addr=0x2B|0x30) */
 #define	PV88080_BUCK3_EN				0x80
-#define PV88080_VBUCK3_MASK			0x7F
+#define PV88080_VBUCK3_MASK				0x7F
 
-/* PV88080_REG_BUCK1_CONF1 (addr=0x28) */
-#define PV88080_BUCK1_ILIM_SHIFT			2
+/* PV88080_REG_BUCK1_CONF1 (addr=0x28|0x2C) */
+#define PV88080_BUCK1_ILIM_SHIFT		2
 #define PV88080_BUCK1_ILIM_MASK			0x0C
 #define PV88080_BUCK1_MODE_MASK			0x03
 
-/* PV88080_REG_BUCK2_CONF1 (addr=0x2a) */
-#define PV88080_BUCK2_ILIM_SHIFT			2
+/* PV88080_REG_BUCK2_CONF1 (addr=0x2A|0x2F) */
+#define PV88080_BUCK2_ILIM_SHIFT		2
 #define PV88080_BUCK2_ILIM_MASK			0x0C
 #define PV88080_BUCK2_MODE_MASK			0x03
 
-/* PV88080_REG_BUCK3_CONF1 (addr=0x2c) */
-#define PV88080_BUCK3_ILIM_SHIFT			2
+/* PV88080_REG_BUCK3_CONF1 (addr=0x2C|0x32) */
+#define PV88080_BUCK3_ILIM_SHIFT		2
 #define PV88080_BUCK3_ILIM_MASK			0x0C
 #define PV88080_BUCK3_MODE_MASK			0x03
 
@@ -73,20 +93,26 @@
 #define	PV88080_BUCK_MODE_AUTO			0x01
 #define	PV88080_BUCK_MODE_SYNC			0x02
 
-/* PV88080_REG_BUCK2_CONF2 (addr=0x61) */
-/* PV88080_REG_BUCK3_CONF2 (addr=0x69) */
-#define PV88080_BUCK_VDAC_RANGE_SHIFT			7
-#define PV88080_BUCK_VDAC_RANGE_MASK			0x01
+/* PV88080_REG_HVBUCK_CONF1 (addr=0x2D|0x33) */
+#define PV88080_VHVBUCK_MASK			0xFF
+
+/* PV88080_REG_HVBUCK_CONF1 (addr=0x2E|0x34) */
+#define PV88080_HVBUCK_EN				0x01
+
+/* PV88080_REG_BUCK2_CONF2 (addr=0x61|0x63) */
+/* PV88080_REG_BUCK3_CONF2 (addr=0x69|0x6C) */
+#define PV88080_BUCK_VDAC_RANGE_SHIFT	7
+#define PV88080_BUCK_VDAC_RANGE_MASK	0x01
 
-#define PV88080_BUCK_VDAC_RANGE_1			0x00
-#define PV88080_BUCK_VDAC_RANGE_2			0x01
+#define PV88080_BUCK_VDAC_RANGE_1		0x00
+#define PV88080_BUCK_VDAC_RANGE_2		0x01
 
-/* PV88080_REG_BUCK2_CONF5 (addr=0x64) */
-/* PV88080_REG_BUCK3_CONF5 (addr=0x6c) */
-#define PV88080_BUCK_VRANGE_GAIN_SHIFT			0
-#define PV88080_BUCK_VRANGE_GAIN_MASK			0x01
+/* PV88080_REG_BUCK2_CONF5 (addr=0x64|0x66) */
+/* PV88080_REG_BUCK3_CONF5 (addr=0x6C|0x6F) */
+#define PV88080_BUCK_VRANGE_GAIN_SHIFT	0
+#define PV88080_BUCK_VRANGE_GAIN_MASK	0x01
 
-#define PV88080_BUCK_VRANGE_GAIN_1			0x00
-#define PV88080_BUCK_VRANGE_GAIN_2			0x01
+#define PV88080_BUCK_VRANGE_GAIN_1		0x00
+#define PV88080_BUCK_VRANGE_GAIN_2		0x01
 
 #endif	/* __PV88080_REGISTERS_H__ */
diff --git a/drivers/regulator/pv88090-regulator.c b/drivers/regulator/pv88090-regulator.c
index 0057c6740d6f..421641175352 100644
--- a/drivers/regulator/pv88090-regulator.c
+++ b/drivers/regulator/pv88090-regulator.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -25,8 +24,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/regulator/of_regulator.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
 #include "pv88090-regulator.h"
 
 #define PV88090_MAX_REGULATORS	5
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index fafa3488e960..1b88e0e15a70 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -10,7 +10,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
@@ -20,6 +19,13 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/pwm.h>
+#include <linux/gpio/consumer.h>
+
+struct pwm_continuous_reg_data {
+	unsigned int min_uV_dutycycle;
+	unsigned int max_uV_dutycycle;
+	unsigned int dutycycle_unit;
+};
 
 struct pwm_regulator_data {
 	/*  Shared */
@@ -28,6 +34,9 @@ struct pwm_regulator_data {
 	/* Voltage table */
 	struct pwm_voltages *duty_cycle_table;
 
+	/* Continuous mode info */
+	struct pwm_continuous_reg_data continuous;
+
 	/* regulator descriptor */
 	struct regulator_desc desc;
 
@@ -36,8 +45,8 @@ struct pwm_regulator_data {
 
 	int state;
 
-	/* Continuous voltage */
-	int volt_uV;
+	/* Enable GPIO */
+	struct gpio_desc *enb_gpio;
 };
 
 struct pwm_voltages {
@@ -48,10 +57,31 @@ struct pwm_voltages {
 /**
  * Voltage table call-backs
  */
+static void pwm_regulator_init_state(struct regulator_dev *rdev)
+{
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+	struct pwm_state pwm_state;
+	unsigned int dutycycle;
+	int i;
+
+	pwm_get_state(drvdata->pwm, &pwm_state);
+	dutycycle = pwm_get_relative_duty_cycle(&pwm_state, 100);
+
+	for (i = 0; i < rdev->desc->n_voltages; i++) {
+		if (dutycycle == drvdata->duty_cycle_table[i].dutycycle) {
+			drvdata->state = i;
+			return;
+		}
+	}
+}
+
 static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 
+	if (drvdata->state < 0)
+		pwm_regulator_init_state(rdev);
+
 	return drvdata->state;
 }
 
@@ -59,16 +89,14 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
 					 unsigned selector)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
-	struct pwm_args pargs;
-	int dutycycle;
+	struct pwm_state pstate;
 	int ret;
 
-	pwm_get_args(drvdata->pwm, &pargs);
-
-	dutycycle = (pargs.period *
-		    drvdata->duty_cycle_table[selector].dutycycle) / 100;
+	pwm_init_state(drvdata->pwm, &pstate);
+	pwm_set_relative_duty_cycle(&pstate,
+			drvdata->duty_cycle_table[selector].dutycycle, 100);
 
-	ret = pwm_config(drvdata->pwm, dutycycle, pargs.period);
+	ret = pwm_apply_state(drvdata->pwm, &pstate);
 	if (ret) {
 		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
 		return ret;
@@ -94,6 +122,9 @@ static int pwm_regulator_enable(struct regulator_dev *dev)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
 
+	if (drvdata->enb_gpio)
+		gpiod_set_value_cansleep(drvdata->enb_gpio, 1);
+
 	return pwm_enable(drvdata->pwm);
 }
 
@@ -103,6 +134,9 @@ static int pwm_regulator_disable(struct regulator_dev *dev)
 
 	pwm_disable(drvdata->pwm);
 
+	if (drvdata->enb_gpio)
+		gpiod_set_value_cansleep(drvdata->enb_gpio, 0);
+
 	return 0;
 }
 
@@ -110,64 +144,91 @@ static int pwm_regulator_is_enabled(struct regulator_dev *dev)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
 
+	if (drvdata->enb_gpio && !gpiod_get_value_cansleep(drvdata->enb_gpio))
+		return false;
+
 	return pwm_is_enabled(drvdata->pwm);
 }
 
 static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
+	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
+	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
+	int min_uV = rdev->constraints->min_uV;
+	int max_uV = rdev->constraints->max_uV;
+	int diff_uV = max_uV - min_uV;
+	struct pwm_state pstate;
+	unsigned int diff_duty;
+	unsigned int voltage;
+
+	pwm_get_state(drvdata->pwm, &pstate);
 
-	return drvdata->volt_uV;
+	voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
+
+	/*
+	 * The dutycycle for min_uV might be greater than the one for max_uV.
+	 * This is happening when the user needs an inversed polarity, but the
+	 * PWM device does not support inversing it in hardware.
+	 */
+	if (max_uV_duty < min_uV_duty) {
+		voltage = min_uV_duty - voltage;
+		diff_duty = min_uV_duty - max_uV_duty;
+	} else {
+		voltage = voltage - min_uV_duty;
+		diff_duty = max_uV_duty - min_uV_duty;
+	}
+
+	voltage = DIV_ROUND_CLOSEST_ULL((u64)voltage * diff_uV, diff_duty);
+
+	return voltage + min_uV;
 }
 
 static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
-					int min_uV, int max_uV,
-					unsigned *selector)
+				     int req_min_uV, int req_max_uV,
+				     unsigned int *selector)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
-	unsigned int ramp_delay = rdev->constraints->ramp_delay;
-	struct pwm_args pargs;
-	unsigned int req_diff = min_uV - rdev->constraints->min_uV;
-	unsigned int diff;
-	unsigned int duty_pulse;
-	u64 req_period;
-	u32 rem;
+	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
+	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
+	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
+	int min_uV = rdev->constraints->min_uV;
+	int max_uV = rdev->constraints->max_uV;
+	int diff_uV = max_uV - min_uV;
+	struct pwm_state pstate;
+	unsigned int diff_duty;
+	unsigned int dutycycle;
 	int ret;
 
-	pwm_get_args(drvdata->pwm, &pargs);
-	diff = rdev->constraints->max_uV - rdev->constraints->min_uV;
+	pwm_init_state(drvdata->pwm, &pstate);
 
-	/* First try to find out if we get the iduty cycle time which is
-	 * factor of PWM period time. If (request_diff_to_min * pwm_period)
-	 * is perfect divided by voltage_range_diff then it is possible to
-	 * get duty cycle time which is factor of PWM period. This will help
-	 * to get output voltage nearer to requested value as there is no
-	 * calculation loss.
+	/*
+	 * The dutycycle for min_uV might be greater than the one for max_uV.
+	 * This is happening when the user needs an inversed polarity, but the
+	 * PWM device does not support inversing it in hardware.
 	 */
-	req_period = req_diff * pargs.period;
-	div_u64_rem(req_period, diff, &rem);
-	if (!rem) {
-		do_div(req_period, diff);
-		duty_pulse = (unsigned int)req_period;
-	} else {
-		duty_pulse = (pargs.period / 100) * ((req_diff * 100) / diff);
-	}
+	if (max_uV_duty < min_uV_duty)
+		diff_duty = min_uV_duty - max_uV_duty;
+	else
+		diff_duty = max_uV_duty - min_uV_duty;
 
-	ret = pwm_config(drvdata->pwm, duty_pulse, pargs.period);
-	if (ret) {
-		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
-		return ret;
-	}
+	dutycycle = DIV_ROUND_CLOSEST_ULL((u64)(req_min_uV - min_uV) *
+					  diff_duty,
+					  diff_uV);
 
-	ret = pwm_enable(drvdata->pwm);
+	if (max_uV_duty < min_uV_duty)
+		dutycycle = min_uV_duty - dutycycle;
+	else
+		dutycycle = min_uV_duty + dutycycle;
+
+	pwm_set_relative_duty_cycle(&pstate, dutycycle, duty_unit);
+
+	ret = pwm_apply_state(drvdata->pwm, &pstate);
 	if (ret) {
-		dev_err(&rdev->dev, "Failed to enable PWM: %d\n", ret);
+		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
 		return ret;
 	}
-	drvdata->volt_uV = min_uV;
-
-	/* Delay required by PWM regulator to settle to the new voltage */
-	usleep_range(ramp_delay, ramp_delay + 1000);
 
 	return 0;
 }
@@ -226,6 +287,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
 		return ret;
 	}
 
+	drvdata->state			= -EINVAL;
 	drvdata->duty_cycle_table	= duty_cycle_table;
 	memcpy(&drvdata->ops, &pwm_regulator_voltage_table_ops,
 	       sizeof(drvdata->ops));
@@ -238,11 +300,28 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
 static int pwm_regulator_init_continuous(struct platform_device *pdev,
 					 struct pwm_regulator_data *drvdata)
 {
+	u32 dutycycle_range[2] = { 0, 100 };
+	u32 dutycycle_unit = 100;
+
 	memcpy(&drvdata->ops, &pwm_regulator_voltage_continuous_ops,
 	       sizeof(drvdata->ops));
 	drvdata->desc.ops = &drvdata->ops;
 	drvdata->desc.continuous_voltage_range = true;
 
+	of_property_read_u32_array(pdev->dev.of_node,
+				   "pwm-dutycycle-range",
+				   dutycycle_range, 2);
+	of_property_read_u32(pdev->dev.of_node, "pwm-dutycycle-unit",
+			     &dutycycle_unit);
+
+	if (dutycycle_range[0] > dutycycle_unit ||
+	    dutycycle_range[1] > dutycycle_unit)
+		return -EINVAL;
+
+	drvdata->continuous.dutycycle_unit = dutycycle_unit;
+	drvdata->continuous.min_uV_dutycycle = dutycycle_range[0];
+	drvdata->continuous.max_uV_dutycycle = dutycycle_range[1];
+
 	return 0;
 }
 
@@ -253,6 +332,7 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	struct regulator_dev *regulator;
 	struct regulator_config config = { };
 	struct device_node *np = pdev->dev.of_node;
+	enum gpiod_flags gpio_flags;
 	int ret;
 
 	if (!np) {
@@ -290,11 +370,21 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/*
-	 * FIXME: pwm_apply_args() should be removed when switching to the
-	 * atomic PWM API.
-	 */
-	pwm_apply_args(drvdata->pwm);
+	if (init_data->constraints.boot_on || init_data->constraints.always_on)
+		gpio_flags = GPIOD_OUT_HIGH;
+	else
+		gpio_flags = GPIOD_OUT_LOW;
+	drvdata->enb_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
+						    gpio_flags);
+	if (IS_ERR(drvdata->enb_gpio)) {
+		ret = PTR_ERR(drvdata->enb_gpio);
+		dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", ret);
+		return ret;
+	}
+
+	ret = pwm_adjust_config(drvdata->pwm);
+	if (ret)
+		return ret;
 
 	regulator = devm_regulator_register(&pdev->dev,
 					    &drvdata->desc, &config);
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index e254272585b2..1b2acc43fea1 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -448,6 +448,44 @@ static struct regulator_ops switch_ops = {
 };
 
 /*
+ * PM8018 regulators
+ */
+static const struct qcom_rpm_reg pm8018_pldo = {
+	.desc.linear_ranges = pldo_ranges,
+	.desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+	.desc.n_voltages = 161,
+	.desc.ops = &uV_ops,
+	.parts = &rpm8960_ldo_parts,
+	.supports_force_mode_auto = false,
+	.supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_nldo = {
+	.desc.linear_ranges = nldo_ranges,
+	.desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+	.desc.n_voltages = 64,
+	.desc.ops = &uV_ops,
+	.parts = &rpm8960_ldo_parts,
+	.supports_force_mode_auto = false,
+	.supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_smps = {
+	.desc.linear_ranges = smps_ranges,
+	.desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+	.desc.n_voltages = 154,
+	.desc.ops = &uV_ops,
+	.parts = &rpm8960_smps_parts,
+	.supports_force_mode_auto = false,
+	.supports_force_mode_bypass = false,
+};
+
+static const struct qcom_rpm_reg pm8018_switch = {
+	.desc.ops = &switch_ops,
+	.parts = &rpm8960_switch_parts,
+};
+
+/*
  * PM8058 regulators
  */
 static const struct qcom_rpm_reg pm8058_pldo = {
@@ -755,6 +793,32 @@ struct rpm_regulator_data {
 	const char *supply;
 };
 
+static const struct rpm_regulator_data rpm_pm8018_regulators[] = {
+	{ "s1",  QCOM_RPM_PM8018_SMPS1, &pm8018_smps, "vdd_s1" },
+	{ "s2",  QCOM_RPM_PM8018_SMPS2, &pm8018_smps, "vdd_s2" },
+	{ "s3",  QCOM_RPM_PM8018_SMPS3, &pm8018_smps, "vdd_s3" },
+	{ "s4",  QCOM_RPM_PM8018_SMPS4, &pm8018_smps, "vdd_s4" },
+	{ "s5",  QCOM_RPM_PM8018_SMPS5, &pm8018_smps, "vdd_s5" },
+
+	{ "l2",  QCOM_RPM_PM8018_LDO2,  &pm8018_pldo, "vdd_l2" },
+	{ "l3",  QCOM_RPM_PM8018_LDO3,  &pm8018_pldo, "vdd_l3" },
+	{ "l4",  QCOM_RPM_PM8018_LDO4,  &pm8018_pldo, "vdd_l4" },
+	{ "l5",  QCOM_RPM_PM8018_LDO5,  &pm8018_pldo, "vdd_l5" },
+	{ "l6",  QCOM_RPM_PM8018_LDO6,  &pm8018_pldo, "vdd_l7" },
+	{ "l7",  QCOM_RPM_PM8018_LDO7,  &pm8018_pldo, "vdd_l7" },
+	{ "l8",  QCOM_RPM_PM8018_LDO8,  &pm8018_nldo, "vdd_l8" },
+	{ "l9",  QCOM_RPM_PM8018_LDO9,  &pm8921_nldo1200,
+						      "vdd_l9_l10_l11_l12" },
+	{ "l10", QCOM_RPM_PM8018_LDO10, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+	{ "l11", QCOM_RPM_PM8018_LDO11, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+	{ "l12", QCOM_RPM_PM8018_LDO12, &pm8018_nldo, "vdd_l9_l10_l11_l12" },
+	{ "l14", QCOM_RPM_PM8018_LDO14, &pm8018_pldo, "vdd_l14" },
+
+	{ "lvs1", QCOM_RPM_PM8018_LVS1, &pm8018_switch, "lvs1_in" },
+
+	{ }
+};
+
 static const struct rpm_regulator_data rpm_pm8058_regulators[] = {
 	{ "l0",   QCOM_RPM_PM8058_LDO0,   &pm8058_nldo, "vdd_l0_l1_lvs"	},
 	{ "l1",   QCOM_RPM_PM8058_LDO1,   &pm8058_nldo, "vdd_l0_l1_lvs" },
@@ -870,6 +934,8 @@ static const struct rpm_regulator_data rpm_pm8921_regulators[] = {
 };
 
 static const struct of_device_id rpm_of_match[] = {
+	{ .compatible = "qcom,rpm-pm8018-regulators",
+		.data = &rpm_pm8018_regulators },
 	{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
 	{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
 	{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 56a17ec5b5ef..8ed46a9a55c8 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -140,6 +140,18 @@ static const struct regulator_ops rpm_smps_ldo_ops = {
 	.enable = rpm_reg_enable,
 	.disable = rpm_reg_disable,
 	.is_enabled = rpm_reg_is_enabled,
+	.list_voltage = regulator_list_voltage_linear_range,
+
+	.get_voltage = rpm_reg_get_voltage,
+	.set_voltage = rpm_reg_set_voltage,
+
+	.set_load = rpm_reg_set_load,
+};
+
+static const struct regulator_ops rpm_smps_ldo_ops_fixed = {
+	.enable = rpm_reg_enable,
+	.disable = rpm_reg_disable,
+	.is_enabled = rpm_reg_is_enabled,
 
 	.get_voltage = rpm_reg_get_voltage,
 	.set_voltage = rpm_reg_set_voltage,
@@ -166,20 +178,21 @@ static const struct regulator_desc pma8084_hfsmps = {
 static const struct regulator_desc pma8084_ftsmps = {
 	.linear_ranges = (struct regulator_linear_range[]) {
 		REGULATOR_LINEAR_RANGE(350000,  0, 184, 5000),
-		REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000),
+		REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000),
 	},
 	.n_linear_ranges = 2,
-	.n_voltages = 340,
+	.n_voltages = 262,
 	.ops = &rpm_smps_ldo_ops,
 };
 
 static const struct regulator_desc pma8084_pldo = {
 	.linear_ranges = (struct regulator_linear_range[]) {
-		REGULATOR_LINEAR_RANGE(750000,  0,  30, 25000),
-		REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000),
+		REGULATOR_LINEAR_RANGE( 750000,  0,  63, 12500),
+		REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000),
+		REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
 	},
-	.n_linear_ranges = 2,
-	.n_voltages = 100,
+	.n_linear_ranges = 3,
+	.n_voltages = 164,
 	.ops = &rpm_smps_ldo_ops,
 };
 
@@ -199,7 +212,7 @@ static const struct regulator_desc pma8084_switch = {
 static const struct regulator_desc pm8x41_hfsmps = {
 	.linear_ranges = (struct regulator_linear_range[]) {
 		REGULATOR_LINEAR_RANGE( 375000,  0,  95, 12500),
-		REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000),
+		REGULATOR_LINEAR_RANGE(1575000, 96, 158, 25000),
 	},
 	.n_linear_ranges = 2,
 	.n_voltages = 159,
@@ -209,29 +222,30 @@ static const struct regulator_desc pm8x41_hfsmps = {
 static const struct regulator_desc pm8841_ftsmps = {
 	.linear_ranges = (struct regulator_linear_range[]) {
 		REGULATOR_LINEAR_RANGE(350000,  0, 184, 5000),
-		REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000),
+		REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000),
 	},
 	.n_linear_ranges = 2,
-	.n_voltages = 340,
+	.n_voltages = 262,
 	.ops = &rpm_smps_ldo_ops,
 };
 
 static const struct regulator_desc pm8941_boost = {
 	.linear_ranges = (struct regulator_linear_range[]) {
-		REGULATOR_LINEAR_RANGE(4000000, 0, 15, 100000),
+		REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000),
 	},
 	.n_linear_ranges = 1,
-	.n_voltages = 16,
+	.n_voltages = 31,
 	.ops = &rpm_smps_ldo_ops,
 };
 
 static const struct regulator_desc pm8941_pldo = {
 	.linear_ranges = (struct regulator_linear_range[]) {
-		REGULATOR_LINEAR_RANGE( 750000,  0,  30, 25000),
-		REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000),
+		REGULATOR_LINEAR_RANGE( 750000,  0,  63, 12500),
+		REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000),
+		REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
 	},
-	.n_linear_ranges = 2,
-	.n_voltages = 100,
+	.n_linear_ranges = 3,
+	.n_voltages = 164,
 	.ops = &rpm_smps_ldo_ops,
 };
 
@@ -247,7 +261,7 @@ static const struct regulator_desc pm8941_nldo = {
 static const struct regulator_desc pm8941_lnldo = {
 	.fixed_uV = 1740000,
 	.n_voltages = 1,
-	.ops = &rpm_smps_ldo_ops,
+	.ops = &rpm_smps_ldo_ops_fixed,
 };
 
 static const struct regulator_desc pm8941_switch = {
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 84cce21e98cd..16c5f84e06a7 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -1085,6 +1085,8 @@ static struct regulator_ops spmi_vs_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 	.set_soft_start		= spmi_regulator_common_set_soft_start,
 	.set_over_current_protection = spmi_regulator_vs_ocp,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
 };
 
 static struct regulator_ops spmi_boost_ops = {
@@ -1496,6 +1498,7 @@ static const struct spmi_regulator_data pm8941_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1", },
 	{ "s2", 0x1700, "vdd_s2", },
 	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0xa000, },
 	{ "l1", 0x4000, "vdd_l1_l3", },
 	{ "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
 	{ "l3", 0x4200, "vdd_l1_l3", },
@@ -1523,8 +1526,8 @@ static const struct spmi_regulator_data pm8941_regulators[] = {
 	{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
 	{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
 	{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
-	{ "mvs1", 0x8300, "vin_5vs", },
-	{ "mvs2", 0x8400, "vin_5vs", },
+	{ "5vs1", 0x8300, "vin_5vs", "ocp-5vs1", },
+	{ "5vs2", 0x8400, "vin_5vs", "ocp-5vs2", },
 	{ }
 };
 
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 40d07ba036e7..3314bf299a51 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -1,11 +1,15 @@
 /*
- * Regulator driver for Rockchip RK808
+ * Regulator driver for Rockchip RK808/RK818
  *
  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
  *
  * Author: Chris Zhong <zyw@rock-chips.com>
  * Author: Zhang Qing <zhangqing@rock-chips.com>
  *
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
@@ -32,6 +36,12 @@
 #define RK808_BUCK4_VSEL_MASK	0xf
 #define RK808_LDO_VSEL_MASK	0x1f
 
+#define RK818_BUCK_VSEL_MASK		0x3f
+#define RK818_BUCK4_VSEL_MASK		0x1f
+#define RK818_LDO_VSEL_MASK		0x1f
+#define RK818_LDO3_ON_VSEL_MASK		0xf
+#define RK818_BOOST_ON_VSEL_MASK	0xe0
+
 /* Ramp rate definitions for buck1 / buck2 only */
 #define RK808_RAMP_RATE_OFFSET		3
 #define RK808_RAMP_RATE_MASK		(3 << RK808_RAMP_RATE_OFFSET)
@@ -454,6 +464,108 @@ static const struct regulator_desc rk808_reg[] = {
 		RK808_DCDC_EN_REG, BIT(6)),
 };
 
+static const struct regulator_desc rk818_reg[] = {
+	{
+		.name = "DCDC_REG1",
+		.supply_name = "vcc1",
+		.of_match = of_match_ptr("DCDC_REG1"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK818_ID_DCDC1,
+		.ops = &rk808_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 712500,
+		.uV_step = 12500,
+		.n_voltages = 64,
+		.vsel_reg = RK818_BUCK1_ON_VSEL_REG,
+		.vsel_mask = RK818_BUCK_VSEL_MASK,
+		.enable_reg = RK818_DCDC_EN_REG,
+		.enable_mask = BIT(0),
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG2",
+		.supply_name = "vcc2",
+		.of_match = of_match_ptr("DCDC_REG2"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK818_ID_DCDC2,
+		.ops = &rk808_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 712500,
+		.uV_step = 12500,
+		.n_voltages = 64,
+		.vsel_reg = RK818_BUCK2_ON_VSEL_REG,
+		.vsel_mask = RK818_BUCK_VSEL_MASK,
+		.enable_reg = RK818_DCDC_EN_REG,
+		.enable_mask = BIT(1),
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG3",
+		.supply_name = "vcc3",
+		.of_match = of_match_ptr("DCDC_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK818_ID_DCDC3,
+		.ops = &rk808_switch_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 1,
+		.enable_reg = RK818_DCDC_EN_REG,
+		.enable_mask = BIT(2),
+		.owner = THIS_MODULE,
+	},
+	RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
+		RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
+		RK818_DCDC_EN_REG, BIT(3), 0),
+	RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
+		RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
+		RK818_DCDC_EN_REG, BIT(4), 0),
+	RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+		RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(0), 400),
+	RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+		RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(1), 400),
+	{
+		.name = "LDO_REG3",
+		.supply_name = "vcc7",
+		.of_match = of_match_ptr("LDO_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK818_ID_LDO3,
+		.ops = &rk808_reg_ops_ranges,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 16,
+		.linear_ranges = rk808_ldo3_voltage_ranges,
+		.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
+		.vsel_reg = RK818_LDO3_ON_VSEL_REG,
+		.vsel_mask = RK818_LDO3_ON_VSEL_MASK,
+		.enable_reg = RK818_LDO_EN_REG,
+		.enable_mask = BIT(2),
+		.enable_time = 400,
+		.owner = THIS_MODULE,
+	},
+	RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
+		RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(3), 400),
+	RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
+		RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(4), 400),
+	RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
+		RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(5), 400),
+	RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+		RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(6), 400),
+	RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
+		RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+		BIT(7), 400),
+	RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
+		RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+		RK818_DCDC_EN_REG, BIT(5), 400),
+	RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
+		RK818_DCDC_EN_REG, BIT(6)),
+	RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
+		RK818_H5V_EN_REG, BIT(0)),
+	RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
+		RK818_DCDC_EN_REG, BIT(7)),
+};
+
 static int rk808_regulator_dt_parse_pdata(struct device *dev,
 				   struct device *client_dev,
 				   struct regmap *map,
@@ -499,7 +611,8 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 	struct regulator_config config = {};
 	struct regulator_dev *rk808_rdev;
 	struct rk808_regulator_data *pdata;
-	int ret, i;
+	const struct regulator_desc *regulators;
+	int ret, i, nregulators;
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
@@ -512,14 +625,29 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, pdata);
 
+	switch (rk808->variant) {
+	case RK808_ID:
+		regulators = rk808_reg;
+		nregulators = RK808_NUM_REGULATORS;
+		break;
+	case RK818_ID:
+		regulators = rk818_reg;
+		nregulators = RK818_NUM_REGULATORS;
+		break;
+	default:
+		dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
+			rk808->variant);
+		return -EINVAL;
+	}
+
 	config.dev = &client->dev;
 	config.driver_data = pdata;
 	config.regmap = rk808->regmap;
 
 	/* Instantiate the regulators */
-	for (i = 0; i < RK808_NUM_REGULATORS; i++) {
+	for (i = 0; i < nregulators; i++) {
 		rk808_rdev = devm_regulator_register(&pdev->dev,
-						     &rk808_reg[i], &config);
+						     &regulators[i], &config);
 		if (IS_ERR(rk808_rdev)) {
 			dev_err(&client->dev,
 				"failed to register %d regulator\n", i);
@@ -533,15 +661,15 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 static struct platform_driver rk808_regulator_driver = {
 	.probe = rk808_regulator_probe,
 	.driver = {
-		.name = "rk808-regulator",
-		.owner = THIS_MODULE,
+		.name = "rk808-regulator"
 	},
 };
 
 module_platform_driver(rk808_regulator_driver);
 
-MODULE_DESCRIPTION("regulator driver for the rk808 series PMICs");
-MODULE_AUTHOR("Chris Zhong<zyw@rock-chips.com>");
-MODULE_AUTHOR("Zhang Qing<zhangqing@rock-chips.com>");
+MODULE_DESCRIPTION("regulator driver for the RK808/RK818 series PMICs");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:rk808-regulator");
diff --git a/drivers/regulator/rn5t618-regulator.c b/drivers/regulator/rn5t618-regulator.c
index b85ceb8ff911..9c930eb68cda 100644
--- a/drivers/regulator/rn5t618-regulator.c
+++ b/drivers/regulator/rn5t618-regulator.c
@@ -46,6 +46,23 @@ static struct regulator_ops rn5t618_reg_ops = {
 		.vsel_mask	= (vmask),				\
 	}
 
+static struct regulator_desc rn5t567_regulators[] = {
+	/* DCDC */
+	REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500),
+	REG(DCDC2, DC2CTL, BIT(0), DC2DAC, 0xff, 600000, 3500000, 12500),
+	REG(DCDC3, DC3CTL, BIT(0), DC3DAC, 0xff, 600000, 3500000, 12500),
+	REG(DCDC4, DC4CTL, BIT(0), DC4DAC, 0xff, 600000, 3500000, 12500),
+	/* LDO */
+	REG(LDO1, LDOEN1, BIT(0), LDO1DAC, 0x7f, 900000, 3500000, 25000),
+	REG(LDO2, LDOEN1, BIT(1), LDO2DAC, 0x7f, 900000, 3500000, 25000),
+	REG(LDO3, LDOEN1, BIT(2), LDO3DAC, 0x7f, 600000, 3500000, 25000),
+	REG(LDO4, LDOEN1, BIT(3), LDO4DAC, 0x7f, 900000, 3500000, 25000),
+	REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 900000, 3500000, 25000),
+	/* LDO RTC */
+	REG(LDORTC1, LDOEN2, BIT(4), LDORTCDAC, 0x7f, 1200000, 3500000, 25000),
+	REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000),
+};
+
 static struct regulator_desc rn5t618_regulators[] = {
 	/* DCDC */
 	REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500),
@@ -67,18 +84,33 @@ static int rn5t618_regulator_probe(struct platform_device *pdev)
 	struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
+	struct regulator_desc *regulators;
 	int i;
 
+	switch (rn5t618->variant) {
+	case RN5T567:
+		regulators = rn5t567_regulators;
+		break;
+	case RN5T618:
+		regulators = rn5t618_regulators;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	config.dev = pdev->dev.parent;
+	config.regmap = rn5t618->regmap;
+
 	for (i = 0; i < RN5T618_REG_NUM; i++) {
-		config.dev = pdev->dev.parent;
-		config.regmap = rn5t618->regmap;
+		if (!regulators[i].name)
+			continue;
 
 		rdev = devm_regulator_register(&pdev->dev,
-					       &rn5t618_regulators[i],
+					       &regulators[i],
 					       &config);
 		if (IS_ERR(rdev)) {
 			dev_err(&pdev->dev, "failed to register %s regulator\n",
-				rn5t618_regulators[i].name);
+				regulators[i].name);
 			return PTR_ERR(rdev);
 		}
 	}
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 02fb6b4ea820..d838e77dd947 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -750,7 +750,7 @@ static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
 
 /* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
 static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
-	REGULATOR_LINEAR_RANGE(700000, 0xc, 0x18, 25000),
+	REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000),
 };
 
 /* voltage range for s2mps15 LDO 1 */
@@ -760,12 +760,12 @@ static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
 
 /* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
 static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
-	REGULATOR_LINEAR_RANGE(500000, 0x20, 0xb0, 6250),
+	REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250),
 };
 
 /* voltage range for s2mps15 BUCK 8, 9 and 10 */
 static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
-	REGULATOR_LINEAR_RANGE(1000000, 0x20, 0xc0, 12500),
+	REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500),
 };
 
 static const struct regulator_desc s2mps15_regulators[] = {
diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c
index 572816e30095..c139890c1514 100644
--- a/drivers/regulator/tps51632-regulator.c
+++ b/drivers/regulator/tps51632-regulator.c
@@ -94,11 +94,14 @@ static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev,
 		int ramp_delay)
 {
 	struct tps51632_chip *tps = rdev_get_drvdata(rdev);
-	int bit = ramp_delay/6000;
+	int bit;
 	int ret;
 
-	if (bit)
-		bit--;
+	if (ramp_delay == 0)
+		bit = 0;
+	else
+		bit = DIV_ROUND_UP(ramp_delay, 6000) - 1;
+
 	ret = regmap_write(tps->regmap, TPS51632_SLEW_REGS, BIT(bit));
 	if (ret < 0)
 		dev_err(tps->dev, "SLEW reg write failed, err %d\n", ret);
diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c
index adbe4fc5cf07..2d12b9af3540 100644
--- a/drivers/regulator/tps65217-regulator.c
+++ b/drivers/regulator/tps65217-regulator.c
@@ -28,7 +28,7 @@
 #include <linux/mfd/tps65217.h>
 
 #define TPS65217_REGULATOR(_name, _id, _of_match, _ops, _n, _vr, _vm, _em, \
-                           _t, _lr, _nlr) \
+			   _t, _lr, _nlr,  _sr, _sm)	\
 	{						\
 		.name		= _name,		\
 		.id		= _id,			\
@@ -45,6 +45,8 @@
 		.volt_table	= _t,			\
 		.linear_ranges	= _lr,			\
 		.n_linear_ranges = _nlr,		\
+		.bypass_reg	= _sr,			\
+		.bypass_mask	= _sm,			\
 	}						\
 
 static const unsigned int LDO1_VSEL_table[] = {
@@ -118,6 +120,35 @@ static int tps65217_pmic_set_voltage_sel(struct regulator_dev *dev,
 	return ret;
 }
 
+static int tps65217_pmic_set_suspend_enable(struct regulator_dev *dev)
+{
+	struct tps65217 *tps = rdev_get_drvdata(dev);
+	unsigned int rid = rdev_get_id(dev);
+
+	if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
+		return -EINVAL;
+
+	return tps65217_clear_bits(tps, dev->desc->bypass_reg,
+				   dev->desc->bypass_mask,
+				   TPS65217_PROTECT_L1);
+}
+
+static int tps65217_pmic_set_suspend_disable(struct regulator_dev *dev)
+{
+	struct tps65217 *tps = rdev_get_drvdata(dev);
+	unsigned int rid = rdev_get_id(dev);
+
+	if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
+		return -EINVAL;
+
+	if (!tps->strobes[rid])
+		return -EINVAL;
+
+	return tps65217_set_bits(tps, dev->desc->bypass_reg,
+				 dev->desc->bypass_mask,
+				 tps->strobes[rid], TPS65217_PROTECT_L1);
+}
+
 /* Operations permitted on DCDCx, LDO2, LDO3 and LDO4 */
 static struct regulator_ops tps65217_pmic_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -127,6 +158,8 @@ static struct regulator_ops tps65217_pmic_ops = {
 	.set_voltage_sel	= tps65217_pmic_set_voltage_sel,
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
+	.set_suspend_enable	= tps65217_pmic_set_suspend_enable,
+	.set_suspend_disable	= tps65217_pmic_set_suspend_disable,
 };
 
 /* Operations permitted on LDO1 */
@@ -138,41 +171,50 @@ static struct regulator_ops tps65217_pmic_ldo1_ops = {
 	.set_voltage_sel	= tps65217_pmic_set_voltage_sel,
 	.list_voltage		= regulator_list_voltage_table,
 	.map_voltage		= regulator_map_voltage_ascend,
+	.set_suspend_enable	= tps65217_pmic_set_suspend_enable,
+	.set_suspend_disable	= tps65217_pmic_set_suspend_disable,
 };
 
 static const struct regulator_desc regulators[] = {
 	TPS65217_REGULATOR("DCDC1", TPS65217_DCDC_1, "dcdc1",
 			   tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC1,
 			   TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC1_EN,
-			   NULL, tps65217_uv1_ranges, 2),
+			   NULL, tps65217_uv1_ranges, 2, TPS65217_REG_SEQ1,
+			   TPS65217_SEQ1_DC1_SEQ_MASK),
 	TPS65217_REGULATOR("DCDC2", TPS65217_DCDC_2, "dcdc2",
 			   tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC2,
 			   TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC2_EN,
 			   NULL, tps65217_uv1_ranges,
-			   ARRAY_SIZE(tps65217_uv1_ranges)),
+			   ARRAY_SIZE(tps65217_uv1_ranges), TPS65217_REG_SEQ1,
+			   TPS65217_SEQ1_DC2_SEQ_MASK),
 	TPS65217_REGULATOR("DCDC3", TPS65217_DCDC_3, "dcdc3",
 			   tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC3,
 			   TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC3_EN,
-			   NULL, tps65217_uv1_ranges, 1),
+			   NULL, tps65217_uv1_ranges, 1, TPS65217_REG_SEQ2,
+			   TPS65217_SEQ2_DC3_SEQ_MASK),
 	TPS65217_REGULATOR("LDO1", TPS65217_LDO_1, "ldo1",
 			   tps65217_pmic_ldo1_ops, 16, TPS65217_REG_DEFLDO1,
 			   TPS65217_DEFLDO1_LDO1_MASK, TPS65217_ENABLE_LDO1_EN,
-			   LDO1_VSEL_table, NULL, 0),
+			   LDO1_VSEL_table, NULL, 0, TPS65217_REG_SEQ2,
+			   TPS65217_SEQ2_LDO1_SEQ_MASK),
 	TPS65217_REGULATOR("LDO2", TPS65217_LDO_2, "ldo2", tps65217_pmic_ops,
 			   64, TPS65217_REG_DEFLDO2,
 			   TPS65217_DEFLDO2_LDO2_MASK, TPS65217_ENABLE_LDO2_EN,
 			   NULL, tps65217_uv1_ranges,
-			   ARRAY_SIZE(tps65217_uv1_ranges)),
+			   ARRAY_SIZE(tps65217_uv1_ranges), TPS65217_REG_SEQ3,
+			   TPS65217_SEQ3_LDO2_SEQ_MASK),
 	TPS65217_REGULATOR("LDO3", TPS65217_LDO_3, "ldo3", tps65217_pmic_ops,
 			   32, TPS65217_REG_DEFLS1, TPS65217_DEFLDO3_LDO3_MASK,
 			   TPS65217_ENABLE_LS1_EN | TPS65217_DEFLDO3_LDO3_EN,
 			   NULL, tps65217_uv2_ranges,
-			   ARRAY_SIZE(tps65217_uv2_ranges)),
+			   ARRAY_SIZE(tps65217_uv2_ranges), TPS65217_REG_SEQ3,
+			   TPS65217_SEQ3_LDO3_SEQ_MASK),
 	TPS65217_REGULATOR("LDO4", TPS65217_LDO_4, "ldo4", tps65217_pmic_ops,
 			   32, TPS65217_REG_DEFLS2, TPS65217_DEFLDO4_LDO4_MASK,
 			   TPS65217_ENABLE_LS2_EN | TPS65217_DEFLDO4_LDO4_EN,
 			   NULL, tps65217_uv2_ranges,
-			   ARRAY_SIZE(tps65217_uv2_ranges)),
+			   ARRAY_SIZE(tps65217_uv2_ranges), TPS65217_REG_SEQ4,
+			   TPS65217_SEQ4_LDO4_SEQ_MASK),
 };
 
 static int tps65217_regulator_probe(struct platform_device *pdev)
@@ -181,13 +223,18 @@ static int tps65217_regulator_probe(struct platform_device *pdev)
 	struct tps65217_board *pdata = dev_get_platdata(tps->dev);
 	struct regulator_dev *rdev;
 	struct regulator_config config = { };
-	int i;
+	int i, ret;
+	unsigned int val;
 
 	if (tps65217_chip_id(tps) != TPS65217) {
 		dev_err(&pdev->dev, "Invalid tps chip version\n");
 		return -ENODEV;
 	}
 
+	/* Allocate memory for strobes */
+	tps->strobes = devm_kzalloc(&pdev->dev, sizeof(u8) *
+				    TPS65217_NUM_REGULATOR, GFP_KERNEL);
+
 	platform_set_drvdata(pdev, tps);
 
 	for (i = 0; i < TPS65217_NUM_REGULATOR; i++) {
@@ -205,6 +252,10 @@ static int tps65217_regulator_probe(struct platform_device *pdev)
 				pdev->name);
 			return PTR_ERR(rdev);
 		}
+
+		/* Store default strobe info */
+		ret = tps65217_reg_read(tps, regulators[i].bypass_reg, &val);
+		tps->strobes[i] = val & regulators[i].bypass_mask;
 	}
 
 	return 0;
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index a5e5634eeb9e..eb0f5b13841a 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -31,7 +31,7 @@ enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4,
 			   DCDC5, DCDC6, LDO1, LS3 };
 
 #define TPS65218_REGULATOR(_name, _id, _type, _ops, _n, _vr, _vm, _er, _em, \
-			    _cr, _cm, _lr, _nlr, _delay, _fuv)		\
+			   _cr, _cm, _lr, _nlr, _delay, _fuv, _sr, _sm)	\
 	{							\
 		.name			= _name,		\
 		.id			= _id,			\
@@ -49,7 +49,9 @@ enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4,
 		.linear_ranges		= _lr,			\
 		.n_linear_ranges	= _nlr,			\
 		.ramp_delay		= _delay,		\
-		.fixed_uV		= _fuv			\
+		.fixed_uV		= _fuv,			\
+		.bypass_reg	= _sr,				\
+		.bypass_mask	= _sm,				\
 	}							\
 
 #define TPS65218_INFO(_id, _nm, _min, _max)	\
@@ -157,6 +159,48 @@ static int tps65218_pmic_disable(struct regulator_dev *dev)
 				   dev->desc->enable_mask, TPS65218_PROTECT_L1);
 }
 
+static int tps65218_pmic_set_suspend_enable(struct regulator_dev *dev)
+{
+	struct tps65218 *tps = rdev_get_drvdata(dev);
+	unsigned int rid = rdev_get_id(dev);
+
+	if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
+		return -EINVAL;
+
+	return tps65218_clear_bits(tps, dev->desc->bypass_reg,
+				   dev->desc->bypass_mask,
+				   TPS65218_PROTECT_L1);
+}
+
+static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev)
+{
+	struct tps65218 *tps = rdev_get_drvdata(dev);
+	unsigned int rid = rdev_get_id(dev);
+
+	if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
+		return -EINVAL;
+
+	/*
+	 * Certain revisions of TPS65218 will need to have DCDC3 regulator
+	 * enabled always, otherwise an immediate system reboot will occur
+	 * during poweroff.
+	 */
+	if (rid == TPS65218_DCDC_3 && tps->rev == TPS65218_REV_2_1)
+		return 0;
+
+	if (!tps->info[rid]->strobe) {
+		if (rid == TPS65218_DCDC_3)
+			tps->info[rid]->strobe = 3;
+		else
+			return -EINVAL;
+	}
+
+	return tps65218_set_bits(tps, dev->desc->bypass_reg,
+				 dev->desc->bypass_mask,
+				 tps->info[rid]->strobe,
+				 TPS65218_PROTECT_L1);
+}
+
 /* Operations permitted on DCDC1, DCDC2 */
 static struct regulator_ops tps65218_dcdc12_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -167,6 +211,8 @@ static struct regulator_ops tps65218_dcdc12_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_suspend_enable	= tps65218_pmic_set_suspend_enable,
+	.set_suspend_disable	= tps65218_pmic_set_suspend_disable,
 };
 
 /* Operations permitted on DCDC3, DCDC4 and LDO1 */
@@ -178,6 +224,8 @@ static struct regulator_ops tps65218_ldo1_dcdc34_ops = {
 	.set_voltage_sel	= tps65218_pmic_set_voltage_sel,
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
+	.set_suspend_enable	= tps65218_pmic_set_suspend_enable,
+	.set_suspend_disable	= tps65218_pmic_set_suspend_disable,
 };
 
 static const int ls3_currents[] = { 100, 200, 500, 1000 };
@@ -247,6 +295,8 @@ static struct regulator_ops tps65218_dcdc56_pmic_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= tps65218_pmic_enable,
 	.disable		= tps65218_pmic_disable,
+	.set_suspend_enable	= tps65218_pmic_set_suspend_enable,
+	.set_suspend_disable	= tps65218_pmic_set_suspend_disable,
 };
 
 static const struct regulator_desc regulators[] = {
@@ -254,42 +304,47 @@ static const struct regulator_desc regulators[] = {
 			   tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC1,
 			   TPS65218_CONTROL_DCDC1_MASK, TPS65218_REG_ENABLE1,
 			   TPS65218_ENABLE1_DC1_EN, 0, 0, dcdc1_dcdc2_ranges,
-			   2, 4000, 0),
+			   2, 4000, 0, TPS65218_REG_SEQ3,
+			   TPS65218_SEQ3_DC1_SEQ_MASK),
 	TPS65218_REGULATOR("DCDC2", TPS65218_DCDC_2, REGULATOR_VOLTAGE,
 			   tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC2,
 			   TPS65218_CONTROL_DCDC2_MASK, TPS65218_REG_ENABLE1,
 			   TPS65218_ENABLE1_DC2_EN, 0, 0, dcdc1_dcdc2_ranges,
-			   2, 4000, 0),
+			   2, 4000, 0, TPS65218_REG_SEQ3,
+			   TPS65218_SEQ3_DC2_SEQ_MASK),
 	TPS65218_REGULATOR("DCDC3", TPS65218_DCDC_3, REGULATOR_VOLTAGE,
 			   tps65218_ldo1_dcdc34_ops, 64,
 			   TPS65218_REG_CONTROL_DCDC3,
 			   TPS65218_CONTROL_DCDC3_MASK, TPS65218_REG_ENABLE1,
 			   TPS65218_ENABLE1_DC3_EN, 0, 0, ldo1_dcdc3_ranges, 2,
-			   0, 0),
+			   0, 0, TPS65218_REG_SEQ4, TPS65218_SEQ4_DC3_SEQ_MASK),
 	TPS65218_REGULATOR("DCDC4", TPS65218_DCDC_4, REGULATOR_VOLTAGE,
 			   tps65218_ldo1_dcdc34_ops, 53,
 			   TPS65218_REG_CONTROL_DCDC4,
 			   TPS65218_CONTROL_DCDC4_MASK, TPS65218_REG_ENABLE1,
 			   TPS65218_ENABLE1_DC4_EN, 0, 0, dcdc4_ranges, 2,
-			   0, 0),
+			   0, 0, TPS65218_REG_SEQ4, TPS65218_SEQ4_DC4_SEQ_MASK),
 	TPS65218_REGULATOR("DCDC5", TPS65218_DCDC_5, REGULATOR_VOLTAGE,
 			   tps65218_dcdc56_pmic_ops, 1, -1, -1,
 			   TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC5_EN, 0, 0,
-			   NULL, 0, 0, 1000000),
+			   NULL, 0, 0, 1000000, TPS65218_REG_SEQ5,
+			   TPS65218_SEQ5_DC5_SEQ_MASK),
 	TPS65218_REGULATOR("DCDC6", TPS65218_DCDC_6, REGULATOR_VOLTAGE,
 			   tps65218_dcdc56_pmic_ops, 1, -1, -1,
 			   TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC6_EN, 0, 0,
-			   NULL, 0, 0, 1800000),
+			   NULL, 0, 0, 1800000, TPS65218_REG_SEQ5,
+			   TPS65218_SEQ5_DC6_SEQ_MASK),
 	TPS65218_REGULATOR("LDO1", TPS65218_LDO_1, REGULATOR_VOLTAGE,
 			   tps65218_ldo1_dcdc34_ops, 64,
 			   TPS65218_REG_CONTROL_LDO1,
 			   TPS65218_CONTROL_LDO1_MASK, TPS65218_REG_ENABLE2,
 			   TPS65218_ENABLE2_LDO1_EN, 0, 0, ldo1_dcdc3_ranges,
-			   2, 0, 0),
+			   2, 0, 0, TPS65218_REG_SEQ6,
+			   TPS65218_SEQ6_LDO1_SEQ_MASK),
 	TPS65218_REGULATOR("LS3", TPS65218_LS_3, REGULATOR_CURRENT,
 			   tps65218_ls3_ops, 0, 0, 0, TPS65218_REG_ENABLE2,
 			   TPS65218_ENABLE2_LS3_EN, TPS65218_REG_CONFIG2,
-			   TPS65218_CONFIG2_LS3ILIM_MASK, NULL, 0, 0, 0),
+			   TPS65218_CONFIG2_LS3ILIM_MASK, NULL, 0, 0, 0, 0, 0),
 };
 
 static int tps65218_regulator_probe(struct platform_device *pdev)
@@ -300,7 +355,8 @@ static int tps65218_regulator_probe(struct platform_device *pdev)
 	struct regulator_dev *rdev;
 	const struct of_device_id	*match;
 	struct regulator_config config = { };
-	int id;
+	int id, ret;
+	unsigned int val;
 
 	match = of_match_device(tps65218_of_match, &pdev->dev);
 	if (!match)
@@ -327,6 +383,12 @@ static int tps65218_regulator_probe(struct platform_device *pdev)
 		return PTR_ERR(rdev);
 	}
 
+	ret = tps65218_reg_read(tps, regulators[id].bypass_reg, &val);
+	if (ret)
+		return ret;
+
+	tps->info[id]->strobe = val & regulators[id].bypass_mask;
+
 	return 0;
 }
 
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index fb991ec76423..696116ebdf50 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -1111,6 +1111,12 @@ static int tps65910_probe(struct platform_device *pdev)
 		pmic->num_regulators = ARRAY_SIZE(tps65910_regs);
 		pmic->ext_sleep_control = tps65910_ext_sleep_control;
 		info = tps65910_regs;
+		/* Work around silicon erratum SWCZ010: output programmed
+		 * voltage level can go higher than expected or crash
+		 * Workaround: use no synchronization of DCDC clocks
+		 */
+		tps65910_reg_clear_bits(pmic->mfd, TPS65910_DCDCCTRL,
+					DCDCCTRL_DCDCCKSYNC_MASK);
 		break;
 	case TPS65911:
 		pmic->get_ctrl_reg = &tps65911_get_ctrl_register;
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index faeb5ee92c9e..210681d6b743 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -905,7 +905,7 @@ static struct regulator_ops twlsmps_ops = {
 			twl4030reg_map_mode)
 #define TWL6030_FIXED_LDO(label, offset, mVolts, turnon_delay) \
 		TWL_FIXED_LDO(label, offset, mVolts, 0x0, turnon_delay, \
-			0x0, TWL6030, twl6030fixed_ops, 0x0)
+			0x0, TWL6030, twl6030fixed_ops, NULL)
 
 #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
 static const struct twlreg_info TWL4030_INFO_##label = { \