diff options
author | Jorge Ramirez <jorge.ramirez-ortiz@linaro.org> | 2019-06-17 11:38:27 -0700 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2019-06-18 19:28:23 +0100 |
commit | 0211f68e626fb02d33c1e4302d907a45366a2d93 (patch) | |
tree | 013eae110ccaebb876e9e112d29193aa329b22ee /drivers/regulator | |
parent | bbd7992e6a32a3a52f3c26c86eba81037651c5c6 (diff) | |
download | linux-0211f68e626fb02d33c1e4302d907a45366a2d93.tar.gz linux-0211f68e626fb02d33c1e4302d907a45366a2d93.tar.bz2 linux-0211f68e626fb02d33c1e4302d907a45366a2d93.zip |
regulator: qcom_spmi: add PMS405 SPMI regulator
The PMS405 has 5 HFSMPS and 13 LDO regulators,
This commit adds support for one of the 5 HFSMPS regulators (s3) to
the spmi regulator driver.
The PMIC HFSMPS 430 regulators have 8 mV step size and a voltage
control scheme consisting of two 8-bit registers defining a 16-bit
voltage set point in units of millivolts
S3 controls the cpu voltages (s3 is a buck regulator of type HFS430);
it is therefore required so we can enable voltage scaling for safely
running cpufreq.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/qcom_spmi-regulator.c | 43 |
1 files changed, 40 insertions, 3 deletions
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c index ee38b1b63a3b..13f83be50076 100644 --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -97,6 +97,7 @@ enum spmi_regulator_logical_type { SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS, SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO, SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426, + SPMI_REGULATOR_LOGICAL_TYPE_HFS430, }; enum spmi_regulator_type { @@ -149,6 +150,7 @@ enum spmi_regulator_subtype { SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL2 = 0x0e, SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3 = 0x0f, SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10, + SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a, }; enum spmi_common_regulator_registers { @@ -294,6 +296,8 @@ enum spmi_common_control_register_index { /* Clock rate in kHz of the FTSMPS426 regulator reference clock. */ #define SPMI_FTSMPS426_CLOCK_RATE 4800 +#define SPMI_HFS430_CLOCK_RATE 1600 + /* Minimum voltage stepper delay for each step. */ #define SPMI_FTSMPS426_STEP_DELAY 2 @@ -507,6 +511,10 @@ static struct spmi_voltage_range ult_pldo_ranges[] = { SPMI_VOLTAGE_RANGE(0, 1750000, 1750000, 3337500, 3337500, 12500), }; +static struct spmi_voltage_range hfs430_ranges[] = { + SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000), +}; + static DEFINE_SPMI_SET_POINTS(pldo); static DEFINE_SPMI_SET_POINTS(nldo1); static DEFINE_SPMI_SET_POINTS(nldo2); @@ -522,6 +530,7 @@ static DEFINE_SPMI_SET_POINTS(ult_lo_smps); static DEFINE_SPMI_SET_POINTS(ult_ho_smps); static DEFINE_SPMI_SET_POINTS(ult_nldo); static DEFINE_SPMI_SET_POINTS(ult_pldo); +static DEFINE_SPMI_SET_POINTS(hfs430); static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf, int len) @@ -1398,12 +1407,26 @@ static struct regulator_ops spmi_ftsmps426_ops = { .set_pull_down = spmi_regulator_common_set_pull_down, }; +static struct regulator_ops spmi_hfs430_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = spmi_regulator_ftsmps426_set_voltage, + .set_voltage_time_sel = spmi_regulator_set_voltage_time_sel, + .get_voltage_sel = spmi_regulator_ftsmps426_get_voltage, + .map_voltage = spmi_regulator_single_map_voltage, + .list_voltage = spmi_regulator_common_list_voltage, + .set_mode = spmi_regulator_ftsmps426_set_mode, + .get_mode = spmi_regulator_ftsmps426_get_mode, +}; + /* Maximum possible digital major revision value */ #define INF 0xFF static const struct spmi_regulator_mapping supported_regulators[] = { /* type subtype dig_min dig_max ltype ops setpoints hpm_min */ SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000), + SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000), SPMI_VREG(LDO, N300, 0, INF, LDO, ldo, nldo1, 10000), SPMI_VREG(LDO, N600, 0, 0, LDO, ldo, nldo2, 10000), SPMI_VREG(LDO, N1200, 0, 0, LDO, ldo, nldo2, 10000), @@ -1571,7 +1594,8 @@ static int spmi_regulator_init_slew_rate(struct spmi_regulator *vreg) return ret; } -static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg) +static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg, + int clock_rate) { int ret; u8 reg = 0; @@ -1588,7 +1612,7 @@ static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg) delay >>= SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT; /* slew_rate has units of uV/us */ - slew_rate = SPMI_FTSMPS426_CLOCK_RATE * range->step_uV; + slew_rate = clock_rate * range->step_uV; slew_rate /= 1000 * (SPMI_FTSMPS426_STEP_DELAY << delay); slew_rate *= SPMI_FTSMPS426_STEP_MARGIN_NUM; slew_rate /= SPMI_FTSMPS426_STEP_MARGIN_DEN; @@ -1740,7 +1764,14 @@ static int spmi_regulator_of_parse(struct device_node *node, return ret; break; case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426: - ret = spmi_regulator_init_slew_rate_ftsmps426(vreg); + ret = spmi_regulator_init_slew_rate_ftsmps426(vreg, + SPMI_FTSMPS426_CLOCK_RATE); + if (ret) + return ret; + break; + case SPMI_REGULATOR_LOGICAL_TYPE_HFS430: + ret = spmi_regulator_init_slew_rate_ftsmps426(vreg, + SPMI_HFS430_CLOCK_RATE); if (ret) return ret; break; @@ -1908,6 +1939,11 @@ static const struct spmi_regulator_data pm8005_regulators[] = { { } }; +static const struct spmi_regulator_data pms405_regulators[] = { + { "s3", 0x1a00, "vdd_s3"}, + { } +}; + static const struct of_device_id qcom_spmi_regulator_match[] = { { .compatible = "qcom,pm8005-regulators", .data = &pm8005_regulators }, { .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators }, @@ -1915,6 +1951,7 @@ static const struct of_device_id qcom_spmi_regulator_match[] = { { .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators }, { .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators }, { .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators }, + { .compatible = "qcom,pms405-regulators", .data = &pms405_regulators }, { } }; MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match); |