diff options
author | Mark Brown <broonie@kernel.org> | 2019-07-04 17:34:32 +0100 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2019-07-04 17:34:32 +0100 |
commit | 65244e5b1f4fade54b490b47b871cefe1d7d07f0 (patch) | |
tree | 7474acf605cd0ddb2cb3ca62cc4b41494a049105 /drivers/regulator | |
parent | f0386617dca6deaca241a01efb9a579d0d727e7f (diff) | |
parent | 3c7577d442a76c2015dd765497395fb394b78051 (diff) | |
download | linux-65244e5b1f4fade54b490b47b871cefe1d7d07f0.tar.gz linux-65244e5b1f4fade54b490b47b871cefe1d7d07f0.tar.bz2 linux-65244e5b1f4fade54b490b47b871cefe1d7d07f0.zip |
Merge branch 'regulator-5.3' into regulator-next
Diffstat (limited to 'drivers/regulator')
25 files changed, 1969 insertions, 372 deletions
diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800-regulator.c index 69ae25886181..69ae25886181 100644 --- a/drivers/regulator/88pm800.c +++ b/drivers/regulator/88pm800-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8553bdf87c1d..1e590ecf1a9d 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -136,19 +136,20 @@ config REGULATOR_AB8500 signal AB8500 PMIC config REGULATOR_ARIZONA_LDO1 - tristate "Wolfson Arizona class devices LDO1" - depends on MFD_ARIZONA + tristate "Cirrus Madera and Wolfson Arizona class devices LDO1" + depends on MFD_ARIZONA || MFD_MADERA depends on SND_SOC help - Support for the LDO1 regulators found on Wolfson Arizona class - devices. + Support for the LDO1 regulators found on Cirrus Logic Madera codecs + and Wolfson Microelectronic Arizona codecs. config REGULATOR_ARIZONA_MICSUPP - tristate "Wolfson Arizona class devices MICSUPP" - depends on MFD_ARIZONA + tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP" + depends on MFD_ARIZONA || MFD_MADERA depends on SND_SOC help - Support for the MICSUPP regulators found on Wolfson Arizona class + Support for the MICSUPP regulators found on Cirrus Logic Madera codecs + and Wolfson Microelectronic Arizona codecs devices. config REGULATOR_AS3711 @@ -258,7 +259,7 @@ config REGULATOR_DA9062 config REGULATOR_DA9063 tristate "Dialog Semiconductor DA9063 regulators" - depends on MFD_DA9063 + depends on MFD_DA9063 && OF help Say y here to support the BUCKs and LDOs regulators found on DA9063 PMICs. @@ -829,6 +830,26 @@ config REGULATOR_SKY81452 This driver can also be built as a module. If so, the module will be called sky81452-regulator. +config REGULATOR_SLG51000 + tristate "Dialog Semiconductor SLG51000 regulators" + depends on I2C + select REGMAP_I2C + help + Say y here to support for the Dialog Semiconductor SLG51000. + The SLG51000 is seven compact and customizable low dropout + regulators. + +config REGULATOR_STM32_BOOSTER + tristate "STMicroelectronics STM32 BOOSTER" + depends on ARCH_STM32 || COMPILE_TEST + help + This driver supports internal booster (3V3) embedded in some + STMicroelectronics STM32 chips. It can be used to supply ADC analog + input switches when vdda supply is below 2.7V. + + This driver can also be built as a module. If so, the module + will be called stm32-booster. + config REGULATOR_STM32_VREFBUF tristate "STMicroelectronics STM32 VREFBUF" depends on ARCH_STM32 || COMPILE_TEST diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 93f53840e8f1..eef73b5a35a4 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_88PG86X) += 88pg86x.o -obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o +obj-$(CONFIG_REGULATOR_88PM800) += 88pm800-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o @@ -104,6 +104,8 @@ obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o +obj-$(CONFIG_REGULATOR_SLG51000) += slg51000-regulator.o +obj-$(CONFIG_REGULATOR_STM32_BOOSTER) += stm32-booster.o obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index e4bc7b1e5ccd..1a3d7b720f5e 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -25,6 +25,10 @@ #include <linux/mfd/arizona/pdata.h> #include <linux/mfd/arizona/registers.h> +#include <linux/mfd/madera/core.h> +#include <linux/mfd/madera/pdata.h> +#include <linux/mfd/madera/registers.h> + struct arizona_ldo1 { struct regulator_dev *regulator; struct regmap *regmap; @@ -158,6 +162,31 @@ static const struct regulator_init_data arizona_ldo1_wm5110 = { .num_consumer_supplies = 1, }; +static const struct regulator_desc madera_ldo1 = { + .name = "LDO1", + .supply_name = "LDOVDD", + .type = REGULATOR_VOLTAGE, + .ops = &arizona_ldo1_ops, + + .vsel_reg = MADERA_LDO1_CONTROL_1, + .vsel_mask = MADERA_LDO1_VSEL_MASK, + .min_uV = 900000, + .uV_step = 25000, + .n_voltages = 13, + .enable_time = 3000, + + .owner = THIS_MODULE, +}; + +static const struct regulator_init_data madera_ldo1_default = { + .constraints = { + .min_uV = 1200000, + .max_uV = 1200000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, +}; + static int arizona_ldo1_of_get_pdata(struct arizona_ldo1_pdata *pdata, struct regulator_config *config, const struct regulator_desc *desc, @@ -320,6 +349,32 @@ static int arizona_ldo1_remove(struct platform_device *pdev) return 0; } +static int madera_ldo1_probe(struct platform_device *pdev) +{ + struct madera *madera = dev_get_drvdata(pdev->dev.parent); + struct arizona_ldo1 *ldo1; + bool external_dcvdd; + int ret; + + ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL); + if (!ldo1) + return -ENOMEM; + + ldo1->regmap = madera->regmap; + + ldo1->init_data = madera_ldo1_default; + + ret = arizona_ldo1_common_init(pdev, ldo1, &madera_ldo1, + &madera->pdata.ldo1, + &external_dcvdd); + if (ret) + return ret; + + madera->internal_dcvdd = !external_dcvdd; + + return 0; +} + static struct platform_driver arizona_ldo1_driver = { .probe = arizona_ldo1_probe, .remove = arizona_ldo1_remove, @@ -328,10 +383,36 @@ static struct platform_driver arizona_ldo1_driver = { }, }; -module_platform_driver(arizona_ldo1_driver); +static struct platform_driver madera_ldo1_driver = { + .probe = madera_ldo1_probe, + .remove = arizona_ldo1_remove, + .driver = { + .name = "madera-ldo1", + }, +}; + +static struct platform_driver * const madera_ldo1_drivers[] = { + &arizona_ldo1_driver, + &madera_ldo1_driver, +}; + +static int __init arizona_ldo1_init(void) +{ + return platform_register_drivers(madera_ldo1_drivers, + ARRAY_SIZE(madera_ldo1_drivers)); +} +module_init(arizona_ldo1_init); + +static void __exit madera_ldo1_exit(void) +{ + platform_unregister_drivers(madera_ldo1_drivers, + ARRAY_SIZE(madera_ldo1_drivers)); +} +module_exit(madera_ldo1_exit); /* Module information */ MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); MODULE_DESCRIPTION("Arizona LDO1 driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:arizona-ldo1"); +MODULE_ALIAS("platform:madera-ldo1"); diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index be0d46da51a1..ae1a5de3e57d 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -16,7 +16,6 @@ #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> #include <linux/regulator/of_regulator.h> -#include <linux/gpio.h> #include <linux/slab.h> #include <linux/workqueue.h> #include <sound/soc.h> @@ -25,6 +24,10 @@ #include <linux/mfd/arizona/pdata.h> #include <linux/mfd/arizona/registers.h> +#include <linux/mfd/madera/core.h> +#include <linux/mfd/madera/pdata.h> +#include <linux/mfd/madera/registers.h> + #include <linux/regulator/arizona-micsupp.h> struct arizona_micsupp { @@ -200,6 +203,28 @@ static const struct regulator_init_data arizona_micsupp_ext_default = { .num_consumer_supplies = 1, }; +static const struct regulator_desc madera_micsupp = { + .name = "MICVDD", + .supply_name = "CPVDD1", + .type = REGULATOR_VOLTAGE, + .n_voltages = 40, + .ops = &arizona_micsupp_ops, + + .vsel_reg = MADERA_LDO2_CONTROL_1, + .vsel_mask = MADERA_LDO2_VSEL_MASK, + .enable_reg = MADERA_MIC_CHARGE_PUMP_1, + .enable_mask = MADERA_CPMIC_ENA, + .bypass_reg = MADERA_MIC_CHARGE_PUMP_1, + .bypass_mask = MADERA_CPMIC_BYPASS, + + .linear_ranges = arizona_micsupp_ext_ranges, + .n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges), + + .enable_time = 3000, + + .owner = THIS_MODULE, +}; + static int arizona_micsupp_of_get_pdata(struct arizona_micsupp_pdata *pdata, struct regulator_config *config, const struct regulator_desc *desc) @@ -316,6 +341,24 @@ static int arizona_micsupp_probe(struct platform_device *pdev) &arizona->pdata.micvdd); } +static int madera_micsupp_probe(struct platform_device *pdev) +{ + struct madera *madera = dev_get_drvdata(pdev->dev.parent); + struct arizona_micsupp *micsupp; + + micsupp = devm_kzalloc(&pdev->dev, sizeof(*micsupp), GFP_KERNEL); + if (!micsupp) + return -ENOMEM; + + micsupp->regmap = madera->regmap; + micsupp->dapm = &madera->dapm; + micsupp->dev = madera->dev; + micsupp->init_data = arizona_micsupp_ext_default; + + return arizona_micsupp_common_init(pdev, micsupp, &madera_micsupp, + &madera->pdata.micvdd); +} + static struct platform_driver arizona_micsupp_driver = { .probe = arizona_micsupp_probe, .driver = { @@ -323,10 +366,35 @@ static struct platform_driver arizona_micsupp_driver = { }, }; -module_platform_driver(arizona_micsupp_driver); +static struct platform_driver madera_micsupp_driver = { + .probe = madera_micsupp_probe, + .driver = { + .name = "madera-micsupp", + }, +}; + +static struct platform_driver * const arizona_micsupp_drivers[] = { + &arizona_micsupp_driver, + &madera_micsupp_driver, +}; + +static int __init arizona_micsupp_init(void) +{ + return platform_register_drivers(arizona_micsupp_drivers, + ARRAY_SIZE(arizona_micsupp_drivers)); +} +module_init(arizona_micsupp_init); + +static void __exit arizona_micsupp_exit(void) +{ + platform_unregister_drivers(arizona_micsupp_drivers, + ARRAY_SIZE(arizona_micsupp_drivers)); +} +module_exit(arizona_micsupp_exit); /* Module information */ MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); MODULE_DESCRIPTION("Arizona microphone supply driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:arizona-micsupp"); +MODULE_ALIAS("platform:madera-micsupp"); diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c index 30e3ed430a8a..0248a61f1006 100644 --- a/drivers/regulator/bd70528-regulator.c +++ b/drivers/regulator/bd70528-regulator.c @@ -4,7 +4,6 @@ #include <linux/delay.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/mfd/rohm-bd70528.h> diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c index fde4264da6ff..8c22cfb76173 100644 --- a/drivers/regulator/bd718x7-regulator.c +++ b/drivers/regulator/bd718x7-regulator.c @@ -4,7 +4,6 @@ #include <linux/delay.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/mfd/rohm-bd718x7.h> diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index c894cf0d8a28..df82e2a8442a 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1,12 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-or-later -/* - * core.c -- Voltage/Current Regulator framework. - * - * Copyright 2007, 2008 Wolfson Microelectronics PLC. - * Copyright 2008 SlimLogic Ltd. - * - * Author: Liam Girdwood <lrg@slimlogic.co.uk> - */ +// +// core.c -- Voltage/Current Regulator framework. +// +// Copyright 2007, 2008 Wolfson Microelectronics PLC. +// Copyright 2008 SlimLogic Ltd. +// +// Author: Liam Girdwood <lrg@slimlogic.co.uk> #include <linux/kernel.h> #include <linux/init.h> @@ -1645,9 +1644,9 @@ static int _regulator_get_enable_time(struct regulator_dev *rdev) { if (rdev->constraints && rdev->constraints->enable_time) return rdev->constraints->enable_time; - if (!rdev->desc->ops->enable_time) - return rdev->desc->enable_time; - return rdev->desc->ops->enable_time(rdev); + if (rdev->desc->ops->enable_time) + return rdev->desc->ops->enable_time(rdev); + return rdev->desc->enable_time; } static struct regulator_supply_alias *regulator_find_supply_alias( @@ -3107,6 +3106,66 @@ static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev, return ret; } +static int _regulator_set_voltage_sel_step(struct regulator_dev *rdev, + int uV, int new_selector) +{ + const struct regulator_ops *ops = rdev->desc->ops; + int diff, old_sel, curr_sel, ret; + + /* Stepping is only needed if the regulator is enabled. */ + if (!_regulator_is_enabled(rdev)) + goto final_set; + + if (!ops->get_voltage_sel) + return -EINVAL; + + old_sel = ops->get_voltage_sel(rdev); + if (old_sel < 0) + return old_sel; + + diff = new_selector - old_sel; + if (diff == 0) + return 0; /* No change needed. */ + + if (diff > 0) { + /* Stepping up. */ + for (curr_sel = old_sel + rdev->desc->vsel_step; + curr_sel < new_selector; + curr_sel += rdev->desc->vsel_step) { + /* + * Call the callback directly instead of using + * _regulator_call_set_voltage_sel() as we don't + * want to notify anyone yet. Same in the branch + * below. + */ + ret = ops->set_voltage_sel(rdev, curr_sel); + if (ret) + goto try_revert; + } + } else { + /* Stepping down. */ + for (curr_sel = old_sel - rdev->desc->vsel_step; + curr_sel > new_selector; + curr_sel -= rdev->desc->vsel_step) { + ret = ops->set_voltage_sel(rdev, curr_sel); + if (ret) + goto try_revert; + } + } + +final_set: + /* The final selector will trigger the notifiers. */ + return _regulator_call_set_voltage_sel(rdev, uV, new_selector); + +try_revert: + /* + * At least try to return to the previous voltage if setting a new + * one failed. + */ + (void)ops->set_voltage_sel(rdev, old_sel); + return ret; +} + static int _regulator_set_voltage_time(struct regulator_dev *rdev, int old_uV, int new_uV) { @@ -3180,6 +3239,9 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, selector = ret; if (old_selector == selector) ret = 0; + else if (rdev->desc->vsel_step) + ret = _regulator_set_voltage_sel_step( + rdev, best_val, selector); else ret = _regulator_call_set_voltage_sel( rdev, best_val, selector); diff --git a/drivers/regulator/cpcap-regulator.c b/drivers/regulator/cpcap-regulator.c index d3284361e594..f80781d58a28 100644 --- a/drivers/regulator/cpcap-regulator.c +++ b/drivers/regulator/cpcap-regulator.c @@ -90,7 +90,7 @@ #define CPCAP_REG_OFF_MODE_SEC BIT(15) /** - * SoC specific configuraion for CPCAP regulator. There are at least three + * SoC specific configuration for CPCAP regulator. There are at least three * different SoCs each with their own parameters: omap3, omap4 and tegra2. * * The assign_reg and assign_mask seem to allow toggling between primary diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c index a02e0488410f..2ffc64622451 100644 --- a/drivers/regulator/da9062-regulator.c +++ b/drivers/regulator/da9062-regulator.c @@ -493,12 +493,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO1_CONT, .desc.enable_mask = DA9062AA_LDO1_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO1_A, .desc.vsel_mask = DA9062AA_VLDO1_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO1_A, __builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -525,12 +526,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (600))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO2_CONT, .desc.enable_mask = DA9062AA_LDO2_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO2_A, .desc.vsel_mask = DA9062AA_VLDO2_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO2_A, __builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -557,12 +559,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO3_CONT, .desc.enable_mask = DA9062AA_LDO3_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO3_A, .desc.vsel_mask = DA9062AA_VLDO3_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO3_A, __builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -589,12 +592,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO4_CONT, .desc.enable_mask = DA9062AA_LDO4_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO4_A, .desc.vsel_mask = DA9062AA_VLDO4_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO4_A, __builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -769,12 +773,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO1_CONT, .desc.enable_mask = DA9062AA_LDO1_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO1_A, .desc.vsel_mask = DA9062AA_VLDO1_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO1_A, __builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -801,12 +806,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (600))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO2_CONT, .desc.enable_mask = DA9062AA_LDO2_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO2_A, .desc.vsel_mask = DA9062AA_VLDO2_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO2_A, __builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -833,12 +839,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO3_CONT, .desc.enable_mask = DA9062AA_LDO3_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO3_A, .desc.vsel_mask = DA9062AA_VLDO3_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO3_A, __builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - @@ -865,12 +872,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = { .desc.ops = &da9062_ldo_ops, .desc.min_uV = (900) * 1000, .desc.uV_step = (50) * 1000, - .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.n_voltages = ((3600) - (900))/(50) + 1 + + DA9062AA_VLDO_A_MIN_SEL, .desc.enable_reg = DA9062AA_LDO4_CONT, .desc.enable_mask = DA9062AA_LDO4_EN_MASK, .desc.vsel_reg = DA9062AA_VLDO4_A, .desc.vsel_mask = DA9062AA_VLDO4_A_MASK, - .desc.linear_min_sel = 0, + .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, .sleep = REG_FIELD(DA9062AA_VLDO4_A, __builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1, sizeof(unsigned int) * 8 - diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index 6f9ce1a6e44d..02f816318fba 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -19,7 +19,6 @@ #include <linux/regulator/machine.h> #include <linux/regulator/of_regulator.h> #include <linux/mfd/da9063/core.h> -#include <linux/mfd/da9063/pdata.h> #include <linux/mfd/da9063/registers.h> @@ -28,6 +27,49 @@ REG_FIELD(_reg, __builtin_ffs((int)_mask) - 1, \ sizeof(unsigned int) * 8 - __builtin_clz((_mask)) - 1) +/* DA9063 and DA9063L regulator IDs */ +enum { + /* BUCKs */ + DA9063_ID_BCORE1, + DA9063_ID_BCORE2, + DA9063_ID_BPRO, + DA9063_ID_BMEM, + DA9063_ID_BIO, + DA9063_ID_BPERI, + + /* BCORE1 and BCORE2 in merged mode */ + DA9063_ID_BCORES_MERGED, + /* BMEM and BIO in merged mode */ + DA9063_ID_BMEM_BIO_MERGED, + /* When two BUCKs are merged, they cannot be reused separately */ + + /* LDOs on both DA9063 and DA9063L */ + DA9063_ID_LDO3, + DA9063_ID_LDO7, + DA9063_ID_LDO8, + DA9063_ID_LDO9, + DA9063_ID_LDO11, + + /* DA9063-only LDOs */ + DA9063_ID_LDO1, + DA9063_ID_LDO2, + DA9063_ID_LDO4, + DA9063_ID_LDO5, + DA9063_ID_LDO6, + DA9063_ID_LDO10, +}; + +/* Old regulator platform data */ +struct da9063_regulator_data { + int id; + struct regulator_init_data *initdata; +}; + +struct da9063_regulators_pdata { + unsigned n_regulators; + struct da9063_regulator_data *regulator_data; +}; + /* Regulator capabilities and registers description */ struct da9063_regulator_info { struct regulator_desc desc; @@ -592,7 +634,6 @@ static const struct regulator_init_data *da9063_get_regulator_initdata( return NULL; } -#ifdef CONFIG_OF static struct of_regulator_match da9063_matches[] = { [DA9063_ID_BCORE1] = { .name = "bcore1" }, [DA9063_ID_BCORE2] = { .name = "bcore2" }, @@ -670,20 +711,10 @@ static struct da9063_regulators_pdata *da9063_parse_regulators_dt( *da9063_reg_matches = da9063_matches; return pdata; } -#else -static struct da9063_regulators_pdata *da9063_parse_regulators_dt( - struct platform_device *pdev, - struct of_regulator_match **da9063_reg_matches) -{ - *da9063_reg_matches = NULL; - return ERR_PTR(-ENODEV); -} -#endif static int da9063_regulator_probe(struct platform_device *pdev) { struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent); - struct da9063_pdata *da9063_pdata = dev_get_platdata(da9063->dev); struct of_regulator_match *da9063_reg_matches = NULL; struct da9063_regulators_pdata *regl_pdata; const struct da9063_dev_model *model; @@ -693,11 +724,7 @@ static int da9063_regulator_probe(struct platform_device *pdev) bool bcores_merged, bmem_bio_merged; int id, irq, n, n_regulators, ret, val; - regl_pdata = da9063_pdata ? da9063_pdata->regulators_pdata : NULL; - - if (!regl_pdata) - regl_pdata = da9063_parse_regulators_dt(pdev, - &da9063_reg_matches); + regl_pdata = da9063_parse_regulators_dt(pdev, &da9063_reg_matches); if (IS_ERR(regl_pdata) || regl_pdata->n_regulators == 0) { dev_err(&pdev->dev, diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c index da37b4ccd834..0309823d2c72 100644 --- a/drivers/regulator/da9211-regulator.c +++ b/drivers/regulator/da9211-regulator.c @@ -289,6 +289,8 @@ static struct da9211_pdata *da9211_parse_regulators_dt( 0, GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE, "da9211-enable"); + if (IS_ERR(pdata->gpiod_ren[n])) + pdata->gpiod_ren[n] = NULL; n++; } diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index b9ae45d2d199..4986cc5064a1 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -1,10 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-or-later -/* - * helpers.c -- Voltage/Current Regulator framework helper functions. - * - * Copyright 2007, 2008 Wolfson Microelectronics PLC. - * Copyright 2008 SlimLogic Ltd. - */ +// +// helpers.c -- Voltage/Current Regulator framework helper functions. +// +// Copyright 2007, 2008 Wolfson Microelectronics PLC. +// Copyright 2008 SlimLogic Ltd. #include <linux/kernel.h> #include <linux/err.h> diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c index 0db367b54ae7..8d9731e4052b 100644 --- a/drivers/regulator/max77620-regulator.c +++ b/drivers/regulator/max77620-regulator.c @@ -467,7 +467,7 @@ static int max77620_regulator_is_enabled(struct regulator_dev *rdev) { struct max77620_regulator *pmic = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); - int ret = 1; + int ret; if (pmic->active_fps_src[id] != MAX77620_FPS_SRC_NONE) return 1; @@ -758,6 +758,24 @@ static struct max77620_regulator_info max20024_regs_info[MAX77620_NUM_REGS] = { RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000), }; +static struct max77620_regulator_info max77663_regs_info[MAX77620_NUM_REGS] = { + RAIL_SD(SD0, sd0, "in-sd0", SD0, 600000, 3387500, 12500, 0xFF, NONE), + RAIL_SD(SD1, sd1, "in-sd1", SD1, 800000, 1587500, 12500, 0xFF, NONE), + RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE), + RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE), + RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE), + + RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000), + RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000), + RAIL_LDO(LDO2, ldo2, "in-ldo2", P, 800000, 3950000, 50000), + RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000), + RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500), + RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000), + RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000), + RAIL_LDO(LDO7, ldo7, "in-ldo7-8", N, 800000, 3950000, 50000), + RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000), +}; + static int max77620_regulator_probe(struct platform_device *pdev) { struct max77620_chip *max77620_chip = dev_get_drvdata(pdev->dev.parent); @@ -782,9 +800,14 @@ static int max77620_regulator_probe(struct platform_device *pdev) case MAX77620: rinfo = max77620_regs_info; break; - default: + case MAX20024: rinfo = max20024_regs_info; break; + case MAX77663: + rinfo = max77663_regs_info; + break; + default: + return -EINVAL; } config.regmap = pmic->rmap; @@ -878,6 +901,7 @@ static const struct dev_pm_ops max77620_regulator_pm_ops = { static const struct platform_device_id max77620_regulator_devtype[] = { { .name = "max77620-pmic", }, { .name = "max20024-pmic", }, + { .name = "max77663-pmic", }, {}, }; MODULE_DEVICE_TABLE(platform, max77620_regulator_devtype); diff --git a/drivers/regulator/max77650-regulator.c b/drivers/regulator/max77650-regulator.c index 5c4f86c98510..e57fc9197d62 100644 --- a/drivers/regulator/max77650-regulator.c +++ b/drivers/regulator/max77650-regulator.c @@ -20,6 +20,8 @@ #define MAX77650_REGULATOR_V_LDO_MASK GENMASK(6, 0) #define MAX77650_REGULATOR_V_SBB_MASK GENMASK(5, 0) +#define MAX77651_REGULATOR_V_SBB1_MASK GENMASK(5, 2) +#define MAX77651_REGULATOR_V_SBB1_RANGE_MASK GENMASK(1, 0) #define MAX77650_REGULATOR_AD_MASK BIT(3) #define MAX77650_REGULATOR_AD_DISABLED 0x00 @@ -41,43 +43,22 @@ struct max77650_regulator_desc { unsigned int regB; }; -static const unsigned int max77651_sbb1_regulator_volt_table[] = { - 2400000, 3200000, 4000000, 4800000, - 2450000, 3250000, 4050000, 4850000, - 2500000, 3300000, 4100000, 4900000, - 2550000, 3350000, 4150000, 4950000, - 2600000, 3400000, 4200000, 5000000, - 2650000, 3450000, 4250000, 5050000, - 2700000, 3500000, 4300000, 5100000, - 2750000, 3550000, 4350000, 5150000, - 2800000, 3600000, 4400000, 5200000, - 2850000, 3650000, 4450000, 5250000, - 2900000, 3700000, 4500000, 0, - 2950000, 3750000, 4550000, 0, - 3000000, 3800000, 4600000, 0, - 3050000, 3850000, 4650000, 0, - 3100000, 3900000, 4700000, 0, - 3150000, 3950000, 4750000, 0, +static struct max77650_regulator_desc max77651_SBB1_desc; + +static const unsigned int max77651_sbb1_volt_range_sel[] = { + 0x0, 0x1, 0x2, 0x3 }; -#define MAX77651_REGULATOR_SBB1_SEL_DEC(_val) \ - (((_val & 0x3c) >> 2) | ((_val & 0x03) << 4)) -#define MAX77651_REGULATOR_SBB1_SEL_ENC(_val) \ - (((_val & 0x30) >> 4) | ((_val & 0x0f) << 2)) - -#define MAX77650_REGULATOR_SBB1_SEL_DECR(_val) \ - do { \ - _val = MAX77651_REGULATOR_SBB1_SEL_DEC(_val); \ - _val--; \ - _val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \ - } while (0) - -#define MAX77650_REGULATOR_SBB1_SEL_INCR(_val) \ - do { \ - _val = MAX77651_REGULATOR_SBB1_SEL_DEC(_val); \ - _val++; \ - _val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \ - } while (0) +static const struct regulator_linear_range max77651_sbb1_volt_ranges[] = { + /* range index 0 */ + REGULATOR_LINEAR_RANGE(2400000, 0x00, 0x0f, 50000), + /* range index 1 */ + REGULATOR_LINEAR_RANGE(3200000, 0x00, 0x0f, 50000), + /* range index 2 */ + REGULATOR_LINEAR_RANGE(4000000, 0x00, 0x0f, 50000), + /* range index 3 */ + REGULATOR_LINEAR_RANGE(4800000, 0x00, 0x09, 50000), +}; static const unsigned int max77650_current_limit_table[] = { 1000000, 866000, 707000, 500000, @@ -127,96 +108,6 @@ static int max77650_regulator_disable(struct regulator_dev *rdev) MAX77650_REGULATOR_DISABLED); } -static int max77650_regulator_set_voltage_sel(struct regulator_dev *rdev, - unsigned int sel) -{ - int rv = 0, curr, diff; - bool ascending; - - /* - * If the regulator is disabled, we can program the desired - * voltage right away. - */ - if (!max77650_regulator_is_enabled(rdev)) - return regulator_set_voltage_sel_regmap(rdev, sel); - - /* - * Otherwise we need to manually ramp the output voltage up/down - * one step at a time. - */ - - curr = regulator_get_voltage_sel_regmap(rdev); - if (curr < 0) - return curr; - - diff = curr - sel; - if (diff == 0) - return 0; /* Already there. */ - else if (diff > 0) - ascending = false; - else - ascending = true; - - /* - * Make sure we'll get to the right voltage and break the loop even if - * the selector equals 0. - */ - for (ascending ? curr++ : curr--;; ascending ? curr++ : curr--) { - rv = regulator_set_voltage_sel_regmap(rdev, curr); - if (rv) - return rv; - - if (curr == sel) - break; - } - - return 0; -} - -/* - * Special case: non-linear voltage table for max77651 SBB1 - software - * must ensure the voltage is ramped in 50mV increments. - */ -static int max77651_regulator_sbb1_set_voltage_sel(struct regulator_dev *rdev, - unsigned int sel) -{ - int rv = 0, curr, vcurr, vdest, vdiff; - - /* - * If the regulator is disabled, we can program the desired - * voltage right away. - */ - if (!max77650_regulator_is_enabled(rdev)) - return regulator_set_voltage_sel_regmap(rdev, sel); - - curr = regulator_get_voltage_sel_regmap(rdev); - if (curr < 0) - return curr; - - if (curr == sel) - return 0; /* Already there. */ - - vcurr = max77651_sbb1_regulator_volt_table[curr]; - vdest = max77651_sbb1_regulator_volt_table[sel]; - vdiff = vcurr - vdest; - - for (;;) { - if (vdiff > 0) - MAX77650_REGULATOR_SBB1_SEL_DECR(curr); - else - MAX77650_REGULATOR_SBB1_SEL_INCR(curr); - - rv = regulator_set_voltage_sel_regmap(rdev, curr); - if (rv) - return rv; - - if (curr == sel) - break; - }; - - return 0; -} - static const struct regulator_ops max77650_regulator_LDO_ops = { .is_enabled = max77650_regulator_is_enabled, .enable = max77650_regulator_enable, @@ -224,7 +115,7 @@ static const struct regulator_ops max77650_regulator_LDO_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_sel = max77650_regulator_set_voltage_sel, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_active_discharge = regulator_set_active_discharge_regmap, }; @@ -235,20 +126,20 @@ static const struct regulator_ops max77650_regulator_SBB_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_sel = max77650_regulator_set_voltage_sel, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_current_limit = regulator_get_current_limit_regmap, .set_current_limit = regulator_set_current_limit_regmap, .set_active_discharge = regulator_set_active_discharge_regmap, }; -/* Special case for max77651 SBB1 - non-linear voltage mapping. */ +/* Special case for max77651 SBB1 - pickable linear-range voltage mapping. */ static const struct regulator_ops max77651_SBB1_regulator_ops = { .is_enabled = max77650_regulator_is_enabled, .enable = max77650_regulator_enable, .disable = max77650_regulator_disable, - .list_voltage = regulator_list_voltage_table, - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_sel = max77651_regulator_sbb1_set_voltage_sel, + .list_voltage = regulator_list_voltage_pickable_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap, + .set_voltage_sel = regulator_set_voltage_sel_pickable_regmap, .get_current_limit = regulator_get_current_limit_regmap, .set_current_limit = regulator_set_current_limit_regmap, .set_active_discharge = regulator_set_active_discharge_regmap, @@ -265,6 +156,7 @@ static struct max77650_regulator_desc max77650_LDO_desc = { .min_uV = 1350000, .uV_step = 12500, .n_voltages = 128, + .vsel_step = 1, .vsel_mask = MAX77650_REGULATOR_V_LDO_MASK, .vsel_reg = MAX77650_REG_CNFG_LDO_A, .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED, @@ -290,6 +182,7 @@ static struct max77650_regulator_desc max77650_SBB0_desc = { .min_uV = 800000, .uV_step = 25000, .n_voltages = 64, + .vsel_step = 1, .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK, .vsel_reg = MAX77650_REG_CNFG_SBB0_A, .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED, @@ -319,6 +212,7 @@ static struct max77650_regulator_desc max77650_SBB1_desc = { .min_uV = 800000, .uV_step = 12500, .n_voltages = 64, + .vsel_step = 1, .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK, .vsel_reg = MAX77650_REG_CNFG_SBB1_A, .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED, @@ -345,9 +239,14 @@ static struct max77650_regulator_desc max77651_SBB1_desc = { .supply_name = "in-sbb1", .id = MAX77650_REGULATOR_ID_SBB1, .ops = &max77651_SBB1_regulator_ops, - .volt_table = max77651_sbb1_regulator_volt_table, - .n_voltages = ARRAY_SIZE(max77651_sbb1_regulator_volt_table), - .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK, + .linear_range_selectors = max77651_sbb1_volt_range_sel, + .linear_ranges = max77651_sbb1_volt_ranges, + .n_linear_ranges = ARRAY_SIZE(max77651_sbb1_volt_ranges), + .n_voltages = 58, + .vsel_step = 1, + .vsel_range_mask = MAX77651_REGULATOR_V_SBB1_RANGE_MASK, + .vsel_range_reg = MAX77650_REG_CNFG_SBB1_A, + .vsel_mask = MAX77651_REGULATOR_V_SBB1_MASK, .vsel_reg = MAX77650_REG_CNFG_SBB1_A, .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED, .active_discharge_on = MAX77650_REGULATOR_AD_ENABLED, @@ -376,6 +275,7 @@ static struct max77650_regulator_desc max77650_SBB2_desc = { .min_uV = 800000, .uV_step = 50000, .n_voltages = 64, + .vsel_step = 1, .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK, .vsel_reg = MAX77650_REG_CNFG_SBB2_A, .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED, @@ -405,6 +305,7 @@ static struct max77650_regulator_desc max77651_SBB2_desc = { .min_uV = 2400000, .uV_step = 50000, .n_voltages = 64, + .vsel_step = 1, .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK, .vsel_reg = MAX77650_REG_CNFG_SBB2_A, .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED, @@ -496,3 +397,4 @@ module_platform_driver(max77650_regulator_driver); MODULE_DESCRIPTION("MAXIM 77650/77651 regulator driver"); MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:max77650-regulator"); diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c index ea7b50397300..7b8ec8c0bd15 100644 --- a/drivers/regulator/max77802-regulator.c +++ b/drivers/regulator/max77802-regulator.c @@ -14,9 +14,7 @@ #include <linux/kernel.h> #include <linux/bug.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/slab.h> -#include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index 2a123b87d9f2..ccd5da63cdf2 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -13,11 +13,9 @@ #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/max8952.h> -#include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/io.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/regulator/of_regulator.h> #include <linux/slab.h> @@ -37,7 +35,8 @@ enum { struct max8952_data { struct i2c_client *client; struct max8952_platform_data *pdata; - + struct gpio_desc *vid0_gpiod; + struct gpio_desc *vid1_gpiod; bool vid0; bool vid1; }; @@ -87,16 +86,15 @@ static int max8952_set_voltage_sel(struct regulator_dev *rdev, { struct max8952_data *max8952 = rdev_get_drvdata(rdev); - if (!gpio_is_valid(max8952->pdata->gpio_vid0) || - !gpio_is_valid(max8952->pdata->gpio_vid1)) { + if (!max8952->vid0_gpiod || !max8952->vid1_gpiod) { /* DVS not supported */ return -EPERM; } max8952->vid0 = selector & 0x1; max8952->vid1 = (selector >> 1) & 0x1; - gpio_set_value(max8952->pdata->gpio_vid0, max8952->vid0); - gpio_set_value(max8952->pdata->gpio_vid1, max8952->vid1); + gpiod_set_value(max8952->vid0_gpiod, max8952->vid0); + gpiod_set_value(max8952->vid1_gpiod, max8952->vid1); return 0; } @@ -134,9 +132,6 @@ static struct max8952_platform_data *max8952_parse_dt(struct device *dev) if (!pd) return NULL; - pd->gpio_vid0 = of_get_named_gpio(np, "max8952,vid-gpios", 0); - pd->gpio_vid1 = of_get_named_gpio(np, "max8952,vid-gpios", 1); - if (of_property_read_u32(np, "max8952,default-mode", &pd->default_mode)) dev_warn(dev, "Default mode not specified, assuming 0\n"); @@ -179,7 +174,7 @@ static struct max8952_platform_data *max8952_parse_dt(struct device *dev) static int max8952_pmic_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id) { - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct i2c_adapter *adapter = client->adapter; struct max8952_platform_data *pdata = dev_get_platdata(&client->dev); struct regulator_config config = { }; struct max8952_data *max8952; @@ -187,7 +182,7 @@ static int max8952_pmic_probe(struct i2c_client *client, struct gpio_desc *gpiod; enum gpiod_flags gflags; - int ret = 0, err = 0; + int ret = 0; if (client->dev.of_node) pdata = max8952_parse_dt(&client->dev); @@ -240,32 +235,31 @@ static int max8952_pmic_probe(struct i2c_client *client, max8952->vid0 = pdata->default_mode & 0x1; max8952->vid1 = (pdata->default_mode >> 1) & 0x1; - if (gpio_is_valid(pdata->gpio_vid0) && - gpio_is_valid(pdata->gpio_vid1)) { - unsigned long gpio_flags; - - gpio_flags = max8952->vid0 ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; - if (devm_gpio_request_one(&client->dev, pdata->gpio_vid0, - gpio_flags, "MAX8952 VID0")) - err = 1; - - gpio_flags = max8952->vid1 ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; - if (devm_gpio_request_one(&client->dev, pdata->gpio_vid1, - gpio_flags, "MAX8952 VID1")) - err = 2; - } else - err = 3; - - if (err) { + /* Fetch vid0 and vid1 GPIOs if available */ + gflags = max8952->vid0 ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + max8952->vid0_gpiod = devm_gpiod_get_index_optional(&client->dev, + "max8952,vid", + 0, gflags); + if (IS_ERR(max8952->vid0_gpiod)) + return PTR_ERR(max8952->vid0_gpiod); + gflags = max8952->vid1 ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + max8952->vid1_gpiod = devm_gpiod_get_index_optional(&client->dev, + "max8952,vid", + 1, gflags); + if (IS_ERR(max8952->vid1_gpiod)) + return PTR_ERR(max8952->vid1_gpiod); + + /* If either VID GPIO is missing just disable this */ + if (!max8952->vid0_gpiod || !max8952->vid1_gpiod) { dev_warn(&client->dev, "VID0/1 gpio invalid: " - "DVS not available.\n"); + "DVS not available.\n"); max8952->vid0 = 0; max8952->vid1 = 0; - /* Mark invalid */ - pdata->gpio_vid0 = -1; - pdata->gpio_vid1 = -1; + /* Make sure if we have any descriptors they get set to low */ + if (max8952->vid0_gpiod) + gpiod_set_value(max8952->vid0_gpiod, 0); + if (max8952->vid1_gpiod) + gpiod_set_value(max8952->vid1_gpiod, 0); /* Disable Pulldown of EN only */ max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x60); diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c index 6dfc9e176360..7f51c5fc8194 100644 --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -96,6 +96,8 @@ enum spmi_regulator_logical_type { SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS, SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS, SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO, + SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426, + SPMI_REGULATOR_LOGICAL_TYPE_HFS430, }; enum spmi_regulator_type { @@ -142,11 +144,13 @@ enum spmi_regulator_subtype { SPMI_REGULATOR_SUBTYPE_5V_BOOST = 0x01, SPMI_REGULATOR_SUBTYPE_FTS_CTL = 0x08, SPMI_REGULATOR_SUBTYPE_FTS2p5_CTL = 0x09, + SPMI_REGULATOR_SUBTYPE_FTS426_CTL = 0x0a, SPMI_REGULATOR_SUBTYPE_BB_2A = 0x01, SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL1 = 0x0d, SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL2 = 0x0e, SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3 = 0x0f, SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10, + SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a, }; enum spmi_common_regulator_registers { @@ -162,6 +166,18 @@ enum spmi_common_regulator_registers { SPMI_COMMON_REG_STEP_CTRL = 0x61, }; +/* + * Second common register layout used by newer devices starting with ftsmps426 + * Note that some of the registers from the first common layout remain + * unchanged and their definition is not duplicated. + */ +enum spmi_ftsmps426_regulator_registers { + SPMI_FTSMPS426_REG_VOLTAGE_LSB = 0x40, + SPMI_FTSMPS426_REG_VOLTAGE_MSB = 0x41, + SPMI_FTSMPS426_REG_VOLTAGE_ULS_LSB = 0x68, + SPMI_FTSMPS426_REG_VOLTAGE_ULS_MSB = 0x69, +}; + enum spmi_vs_registers { SPMI_VS_REG_OCP = 0x4a, SPMI_VS_REG_SOFT_START = 0x4c, @@ -221,6 +237,14 @@ enum spmi_common_control_register_index { #define SPMI_COMMON_MODE_FOLLOW_HW_EN0_MASK 0x01 #define SPMI_COMMON_MODE_FOLLOW_ALL_MASK 0x1f +#define SPMI_FTSMPS426_MODE_BYPASS_MASK 3 +#define SPMI_FTSMPS426_MODE_RETENTION_MASK 4 +#define SPMI_FTSMPS426_MODE_LPM_MASK 5 +#define SPMI_FTSMPS426_MODE_AUTO_MASK 6 +#define SPMI_FTSMPS426_MODE_HPM_MASK 7 + +#define SPMI_FTSMPS426_MODE_MASK 0x07 + /* Common regulator pull down control register layout */ #define SPMI_COMMON_PULL_DOWN_ENABLE_MASK 0x80 @@ -266,6 +290,25 @@ enum spmi_common_control_register_index { #define SPMI_FTSMPS_STEP_MARGIN_NUM 4 #define SPMI_FTSMPS_STEP_MARGIN_DEN 5 +#define SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK 0x03 +#define SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT 0 + +/* Clock rate in kHz of the FTSMPS426 regulator reference clock. */ +#define SPMI_FTSMPS426_CLOCK_RATE 4800 + +#define SPMI_HFS430_CLOCK_RATE 1600 + +/* Minimum voltage stepper delay for each step. */ +#define SPMI_FTSMPS426_STEP_DELAY 2 + +/* + * The ratio SPMI_FTSMPS426_STEP_MARGIN_NUM/SPMI_FTSMPS426_STEP_MARGIN_DEN is + * used to adjust the step rate in order to account for oscillator variance. + */ +#define SPMI_FTSMPS426_STEP_MARGIN_NUM 10 +#define SPMI_FTSMPS426_STEP_MARGIN_DEN 11 + + /* VSET value to decide the range of ULT SMPS */ #define ULT_SMPS_RANGE_SPLIT 0x60 @@ -439,6 +482,10 @@ static struct spmi_voltage_range ftsmps2p5_ranges[] = { SPMI_VOLTAGE_RANGE(1, 160000, 1360000, 2200000, 2200000, 10000), }; +static struct spmi_voltage_range ftsmps426_ranges[] = { + SPMI_VOLTAGE_RANGE(0, 0, 320000, 1352000, 1352000, 4000), +}; + static struct spmi_voltage_range boost_ranges[] = { SPMI_VOLTAGE_RANGE(0, 4000000, 4000000, 5550000, 5550000, 50000), }; @@ -464,6 +511,10 @@ static struct spmi_voltage_range ult_pldo_ranges[] = { SPMI_VOLTAGE_RANGE(0, 1750000, 1750000, 3337500, 3337500, 12500), }; +static struct spmi_voltage_range hfs430_ranges[] = { + SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000), +}; + static DEFINE_SPMI_SET_POINTS(pldo); static DEFINE_SPMI_SET_POINTS(nldo1); static DEFINE_SPMI_SET_POINTS(nldo2); @@ -472,12 +523,14 @@ static DEFINE_SPMI_SET_POINTS(ln_ldo); static DEFINE_SPMI_SET_POINTS(smps); static DEFINE_SPMI_SET_POINTS(ftsmps); static DEFINE_SPMI_SET_POINTS(ftsmps2p5); +static DEFINE_SPMI_SET_POINTS(ftsmps426); static DEFINE_SPMI_SET_POINTS(boost); static DEFINE_SPMI_SET_POINTS(boost_byp); static DEFINE_SPMI_SET_POINTS(ult_lo_smps); static DEFINE_SPMI_SET_POINTS(ult_ho_smps); static DEFINE_SPMI_SET_POINTS(ult_nldo); static DEFINE_SPMI_SET_POINTS(ult_pldo); +static DEFINE_SPMI_SET_POINTS(hfs430); static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf, int len) @@ -739,18 +792,31 @@ spmi_regulator_common_set_voltage(struct regulator_dev *rdev, unsigned selector) return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, buf, 2); } +static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev, + unsigned selector); + +static int spmi_regulator_ftsmps426_set_voltage(struct regulator_dev *rdev, + unsigned selector) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + u8 buf[2]; + int mV; + + mV = spmi_regulator_common_list_voltage(rdev, selector) / 1000; + + buf[0] = mV & 0xff; + buf[1] = mV >> 8; + return spmi_vreg_write(vreg, SPMI_FTSMPS426_REG_VOLTAGE_LSB, buf, 2); +} + static int spmi_regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int old_selector, unsigned int new_selector) { struct spmi_regulator *vreg = rdev_get_drvdata(rdev); - const struct spmi_voltage_range *range; int diff_uV; - range = spmi_regulator_find_range(vreg); - if (!range) - return -EINVAL; - - diff_uV = abs(new_selector - old_selector) * range->step_uV; + diff_uV = abs(spmi_regulator_common_list_voltage(rdev, new_selector) - + spmi_regulator_common_list_voltage(rdev, old_selector)); return DIV_ROUND_UP(diff_uV, vreg->slew_rate); } @@ -770,6 +836,21 @@ static int spmi_regulator_common_get_voltage(struct regulator_dev *rdev) return spmi_hw_selector_to_sw(vreg, voltage_sel, range); } +static int spmi_regulator_ftsmps426_get_voltage(struct regulator_dev *rdev) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + const struct spmi_voltage_range *range; + u8 buf[2]; + int uV; + + spmi_vreg_read(vreg, SPMI_FTSMPS426_REG_VOLTAGE_LSB, buf, 2); + + uV = (((unsigned int)buf[1] << 8) | (unsigned int)buf[0]) * 1000; + range = vreg->set_points->range; + + return (uV - range->set_point_min_uV) / range->step_uV; +} + static int spmi_regulator_single_map_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { @@ -903,13 +984,33 @@ static unsigned int spmi_regulator_common_get_mode(struct regulator_dev *rdev) spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, ®, 1); - if (reg & SPMI_COMMON_MODE_HPM_MASK) - return REGULATOR_MODE_NORMAL; + reg &= SPMI_COMMON_MODE_HPM_MASK | SPMI_COMMON_MODE_AUTO_MASK; - if (reg & SPMI_COMMON_MODE_AUTO_MASK) + switch (reg) { + case SPMI_COMMON_MODE_HPM_MASK: + return REGULATOR_MODE_NORMAL; + case SPMI_COMMON_MODE_AUTO_MASK: return REGULATOR_MODE_FAST; + default: + return REGULATOR_MODE_IDLE; + } +} - return REGULATOR_MODE_IDLE; +static unsigned int spmi_regulator_ftsmps426_get_mode(struct regulator_dev *rdev) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + u8 reg; + + spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, ®, 1); + + switch (reg) { + case SPMI_FTSMPS426_MODE_HPM_MASK: + return REGULATOR_MODE_NORMAL; + case SPMI_FTSMPS426_MODE_AUTO_MASK: + return REGULATOR_MODE_FAST; + default: + return REGULATOR_MODE_IDLE; + } } static int @@ -917,12 +1018,43 @@ spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode) { struct spmi_regulator *vreg = rdev_get_drvdata(rdev); u8 mask = SPMI_COMMON_MODE_HPM_MASK | SPMI_COMMON_MODE_AUTO_MASK; - u8 val = 0; + u8 val; - if (mode == REGULATOR_MODE_NORMAL) + switch (mode) { + case REGULATOR_MODE_NORMAL: val = SPMI_COMMON_MODE_HPM_MASK; - else if (mode == REGULATOR_MODE_FAST) + break; + case REGULATOR_MODE_FAST: val = SPMI_COMMON_MODE_AUTO_MASK; + break; + default: + val = 0; + break; + } + + return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask); +} + +static int +spmi_regulator_ftsmps426_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + u8 mask = SPMI_FTSMPS426_MODE_MASK; + u8 val; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + val = SPMI_FTSMPS426_MODE_HPM_MASK; + break; + case REGULATOR_MODE_FAST: + val = SPMI_FTSMPS426_MODE_AUTO_MASK; + break; + case REGULATOR_MODE_IDLE: + val = SPMI_FTSMPS426_MODE_LPM_MASK; + break; + default: + return -EINVAL; + } return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask); } @@ -1256,12 +1388,41 @@ static struct regulator_ops spmi_ult_ldo_ops = { .set_soft_start = spmi_regulator_common_set_soft_start, }; +static struct regulator_ops spmi_ftsmps426_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = spmi_regulator_ftsmps426_set_voltage, + .set_voltage_time_sel = spmi_regulator_set_voltage_time_sel, + .get_voltage_sel = spmi_regulator_ftsmps426_get_voltage, + .map_voltage = spmi_regulator_single_map_voltage, + .list_voltage = spmi_regulator_common_list_voltage, + .set_mode = spmi_regulator_ftsmps426_set_mode, + .get_mode = spmi_regulator_ftsmps426_get_mode, + .set_load = spmi_regulator_common_set_load, + .set_pull_down = spmi_regulator_common_set_pull_down, +}; + +static struct regulator_ops spmi_hfs430_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = spmi_regulator_ftsmps426_set_voltage, + .set_voltage_time_sel = spmi_regulator_set_voltage_time_sel, + .get_voltage_sel = spmi_regulator_ftsmps426_get_voltage, + .map_voltage = spmi_regulator_single_map_voltage, + .list_voltage = spmi_regulator_common_list_voltage, + .set_mode = spmi_regulator_ftsmps426_set_mode, + .get_mode = spmi_regulator_ftsmps426_get_mode, +}; + /* Maximum possible digital major revision value */ #define INF 0xFF static const struct spmi_regulator_mapping supported_regulators[] = { /* type subtype dig_min dig_max ltype ops setpoints hpm_min */ SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000), + SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000), SPMI_VREG(LDO, N300, 0, INF, LDO, ldo, nldo1, 10000), SPMI_VREG(LDO, N600, 0, 0, LDO, ldo, nldo2, 10000), SPMI_VREG(LDO, N1200, 0, 0, LDO, ldo, nldo2, 10000), @@ -1291,6 +1452,7 @@ static const struct spmi_regulator_mapping supported_regulators[] = { SPMI_VREG(BOOST, 5V_BOOST, 0, INF, BOOST, boost, boost, 0), SPMI_VREG(FTS, FTS_CTL, 0, INF, FTSMPS, ftsmps, ftsmps, 100000), SPMI_VREG(FTS, FTS2p5_CTL, 0, INF, FTSMPS, ftsmps, ftsmps2p5, 100000), + SPMI_VREG(FTS, FTS426_CTL, 0, INF, FTSMPS426, ftsmps426, ftsmps426, 100000), SPMI_VREG(BOOST_BYP, BB_2A, 0, INF, BOOST_BYP, boost, boost_byp, 0), SPMI_VREG(ULT_BUCK, ULT_HF_CTL1, 0, INF, ULT_LO_SMPS, ult_lo_smps, ult_lo_smps, 100000), @@ -1428,6 +1590,35 @@ static int spmi_regulator_init_slew_rate(struct spmi_regulator *vreg) return ret; } +static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg, + int clock_rate) +{ + int ret; + u8 reg = 0; + int delay, slew_rate; + const struct spmi_voltage_range *range = &vreg->set_points->range[0]; + + ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_STEP_CTRL, ®, 1); + if (ret) { + dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret); + return ret; + } + + delay = reg & SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK; + delay >>= SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT; + + /* slew_rate has units of uV/us */ + slew_rate = clock_rate * range->step_uV; + slew_rate /= 1000 * (SPMI_FTSMPS426_STEP_DELAY << delay); + slew_rate *= SPMI_FTSMPS426_STEP_MARGIN_NUM; + slew_rate /= SPMI_FTSMPS426_STEP_MARGIN_DEN; + + /* Ensure that the slew rate is greater than 0 */ + vreg->slew_rate = max(slew_rate, 1); + + return ret; +} + static int spmi_regulator_init_registers(struct spmi_regulator *vreg, const struct spmi_regulator_init_data *data) { @@ -1567,6 +1758,19 @@ static int spmi_regulator_of_parse(struct device_node *node, ret = spmi_regulator_init_slew_rate(vreg); if (ret) return ret; + break; + case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426: + ret = spmi_regulator_init_slew_rate_ftsmps426(vreg, + SPMI_FTSMPS426_CLOCK_RATE); + if (ret) + return ret; + break; + case SPMI_REGULATOR_LOGICAL_TYPE_HFS430: + ret = spmi_regulator_init_slew_rate_ftsmps426(vreg, + SPMI_HFS430_CLOCK_RATE); + if (ret) + return ret; + break; default: break; } @@ -1723,12 +1927,27 @@ static const struct spmi_regulator_data pmi8994_regulators[] = { { } }; +static const struct spmi_regulator_data pm8005_regulators[] = { + { "s1", 0x1400, "vdd_s1", }, + { "s2", 0x1700, "vdd_s2", }, + { "s3", 0x1a00, "vdd_s3", }, + { "s4", 0x1d00, "vdd_s4", }, + { } +}; + +static const struct spmi_regulator_data pms405_regulators[] = { + { "s3", 0x1a00, "vdd_s3"}, + { } +}; + static const struct of_device_id qcom_spmi_regulator_match[] = { + { .compatible = "qcom,pm8005-regulators", .data = &pm8005_regulators }, { .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators }, { .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators }, { .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators }, { .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators }, { .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators }, + { .compatible = "qcom,pms405-regulators", .data = &pms405_regulators }, { } }; MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match); @@ -1736,6 +1955,7 @@ MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match); static int qcom_spmi_regulator_probe(struct platform_device *pdev) { const struct spmi_regulator_data *reg; + const struct spmi_voltage_range *range; const struct of_device_id *match; struct regulator_config config = { }; struct regulator_dev *rdev; @@ -1825,6 +2045,12 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev) } } + if (vreg->set_points && vreg->set_points->count == 1) { + /* since there is only one range */ + range = vreg->set_points->range; + vreg->desc.uV_step = range->step_uV; + } + config.dev = dev; config.driver_data = vreg; config.regmap = regmap; diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 5b7ba7c6c4f6..054baaadfdfd 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -34,7 +34,7 @@ struct s2mps11_info { enum sec_device_type dev_type; /* - * One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether + * One bit for each S2MPS11/S2MPS13/S2MPS14/S2MPU02 regulator whether * the suspend mode was enabled. */ DECLARE_BITMAP(suspend_state, S2MPS_REGULATOR_MAX); @@ -70,10 +70,11 @@ static int s2mps11_regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int new_selector) { struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); + int rdev_id = rdev_get_id(rdev); unsigned int ramp_delay = 0; int old_volt, new_volt; - switch (rdev_get_id(rdev)) { + switch (rdev_id) { case S2MPS11_BUCK2: ramp_delay = s2mps11->ramp_delay2; break; @@ -111,9 +112,10 @@ static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); unsigned int ramp_val, ramp_shift, ramp_reg = S2MPS11_REG_RAMP_BUCK; unsigned int ramp_enable = 1, enable_shift = 0; + int rdev_id = rdev_get_id(rdev); int ret; - switch (rdev_get_id(rdev)) { + switch (rdev_id) { case S2MPS11_BUCK1: if (ramp_delay > s2mps11->ramp_delay16) s2mps11->ramp_delay16 = ramp_delay; @@ -203,9 +205,8 @@ static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) goto ramp_disable; /* Ramp delay can be enabled/disabled only for buck[2346] */ - if ((rdev_get_id(rdev) >= S2MPS11_BUCK2 && - rdev_get_id(rdev) <= S2MPS11_BUCK4) || - rdev_get_id(rdev) == S2MPS11_BUCK6) { + if ((rdev_id >= S2MPS11_BUCK2 && rdev_id <= S2MPS11_BUCK4) || + rdev_id == S2MPS11_BUCK6) { ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP, 1 << enable_shift, 1 << enable_shift); if (ret) { @@ -224,27 +225,133 @@ ramp_disable: 1 << enable_shift, 0); } +static int s2mps11_regulator_enable(struct regulator_dev *rdev) +{ + struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); + int rdev_id = rdev_get_id(rdev); + unsigned int val; + + switch (s2mps11->dev_type) { + case S2MPS11X: + if (test_bit(rdev_id, s2mps11->suspend_state)) + val = S2MPS14_ENABLE_SUSPEND; + else + val = rdev->desc->enable_mask; + break; + case S2MPS13X: + case S2MPS14X: + if (test_bit(rdev_id, s2mps11->suspend_state)) + val = S2MPS14_ENABLE_SUSPEND; + else if (s2mps11->ext_control_gpiod[rdev_id]) + val = S2MPS14_ENABLE_EXT_CONTROL; + else + val = rdev->desc->enable_mask; + break; + case S2MPU02: + if (test_bit(rdev_id, s2mps11->suspend_state)) + val = S2MPU02_ENABLE_SUSPEND; + else + val = rdev->desc->enable_mask; + break; + default: + return -EINVAL; + } + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, val); +} + +static int s2mps11_regulator_set_suspend_disable(struct regulator_dev *rdev) +{ + int ret; + unsigned int val, state; + struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); + int rdev_id = rdev_get_id(rdev); + + /* Below LDO should be always on or does not support suspend mode. */ + switch (s2mps11->dev_type) { + case S2MPS11X: + switch (rdev_id) { + case S2MPS11_LDO2: + case S2MPS11_LDO36: + case S2MPS11_LDO37: + case S2MPS11_LDO38: + return 0; + default: + state = S2MPS14_ENABLE_SUSPEND; + break; + } + break; + case S2MPS13X: + case S2MPS14X: + switch (rdev_id) { + case S2MPS14_LDO3: + return 0; + default: + state = S2MPS14_ENABLE_SUSPEND; + break; + } + break; + case S2MPU02: + switch (rdev_id) { + case S2MPU02_LDO13: + case S2MPU02_LDO14: + case S2MPU02_LDO15: + case S2MPU02_LDO17: + case S2MPU02_BUCK7: + state = S2MPU02_DISABLE_SUSPEND; + break; + default: + state = S2MPU02_ENABLE_SUSPEND; + break; + } + break; + default: + return -EINVAL; + } + + ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); + if (ret < 0) + return ret; + + set_bit(rdev_id, s2mps11->suspend_state); + /* + * Don't enable suspend mode if regulator is already disabled because + * this would effectively for a short time turn on the regulator after + * resuming. + * However we still want to toggle the suspend_state bit for regulator + * in case if it got enabled before suspending the system. + */ + if (!(val & rdev->desc->enable_mask)) + return 0; + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, state); +} + static const struct regulator_ops s2mps11_ldo_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .is_enabled = regulator_is_enabled_regmap, - .enable = regulator_enable_regmap, + .enable = s2mps11_regulator_enable, .disable = regulator_disable_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_suspend_disable = s2mps11_regulator_set_suspend_disable, }; static const struct regulator_ops s2mps11_buck_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .is_enabled = regulator_is_enabled_regmap, - .enable = regulator_enable_regmap, + .enable = s2mps11_regulator_enable, .disable = regulator_disable_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = s2mps11_regulator_set_voltage_time_sel, .set_ramp_delay = s2mps11_set_ramp_delay, + .set_suspend_disable = s2mps11_regulator_set_suspend_disable, }; #define regulator_desc_s2mps11_ldo(num, step) { \ @@ -507,101 +614,16 @@ static const struct regulator_desc s2mps13_regulators[] = { regulator_desc_s2mps13_buck8_10(10, MIN_500_MV, STEP_6_25_MV, 0x10), }; -static int s2mps14_regulator_enable(struct regulator_dev *rdev) -{ - struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); - unsigned int val; - - switch (s2mps11->dev_type) { - case S2MPS13X: - case S2MPS14X: - if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state)) - val = S2MPS14_ENABLE_SUSPEND; - else if (s2mps11->ext_control_gpiod[rdev_get_id(rdev)]) - val = S2MPS14_ENABLE_EXT_CONTROL; - else - val = rdev->desc->enable_mask; - break; - case S2MPU02: - if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state)) - val = S2MPU02_ENABLE_SUSPEND; - else - val = rdev->desc->enable_mask; - break; - default: - return -EINVAL; - } - - return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, - rdev->desc->enable_mask, val); -} - -static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev) -{ - int ret; - unsigned int val, state; - struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); - int rdev_id = rdev_get_id(rdev); - - /* Below LDO should be always on or does not support suspend mode. */ - switch (s2mps11->dev_type) { - case S2MPS13X: - case S2MPS14X: - switch (rdev_id) { - case S2MPS14_LDO3: - return 0; - default: - state = S2MPS14_ENABLE_SUSPEND; - break; - } - break; - case S2MPU02: - switch (rdev_id) { - case S2MPU02_LDO13: - case S2MPU02_LDO14: - case S2MPU02_LDO15: - case S2MPU02_LDO17: - case S2MPU02_BUCK7: - state = S2MPU02_DISABLE_SUSPEND; - break; - default: - state = S2MPU02_ENABLE_SUSPEND; - break; - } - break; - default: - return -EINVAL; - } - - ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); - if (ret < 0) - return ret; - - set_bit(rdev_get_id(rdev), s2mps11->suspend_state); - /* - * Don't enable suspend mode if regulator is already disabled because - * this would effectively for a short time turn on the regulator after - * resuming. - * However we still want to toggle the suspend_state bit for regulator - * in case if it got enabled before suspending the system. - */ - if (!(val & rdev->desc->enable_mask)) - return 0; - - return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, - rdev->desc->enable_mask, state); -} - static const struct regulator_ops s2mps14_reg_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .is_enabled = regulator_is_enabled_regmap, - .enable = s2mps14_regulator_enable, + .enable = s2mps11_regulator_enable, .disable = regulator_disable_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, - .set_suspend_disable = s2mps14_regulator_set_suspend_disable, + .set_suspend_disable = s2mps11_regulator_set_suspend_disable, }; #define regulator_desc_s2mps14_ldo(num, min, step) { \ @@ -828,7 +850,9 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev, 0, GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE, "s2mps11-regulator"); - if (IS_ERR(gpio[reg])) { + if (PTR_ERR(gpio[reg]) == -ENOENT) + gpio[reg] = NULL; + else if (IS_ERR(gpio[reg])) { dev_err(&pdev->dev, "Failed to get control GPIO for %d/%s\n", reg, rdata[reg].name); gpio[reg] = NULL; @@ -864,8 +888,9 @@ static int s2mps11_pmic_dt_parse(struct platform_device *pdev, static int s2mpu02_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { unsigned int ramp_val, ramp_shift, ramp_reg; + int rdev_id = rdev_get_id(rdev); - switch (rdev_get_id(rdev)) { + switch (rdev_id) { case S2MPU02_BUCK1: ramp_shift = S2MPU02_BUCK1_RAMP_SHIFT; break; @@ -893,24 +918,24 @@ static const struct regulator_ops s2mpu02_ldo_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .is_enabled = regulator_is_enabled_regmap, - .enable = s2mps14_regulator_enable, + .enable = s2mps11_regulator_enable, .disable = regulator_disable_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, - .set_suspend_disable = s2mps14_regulator_set_suspend_disable, + .set_suspend_disable = s2mps11_regulator_set_suspend_disable, }; static const struct regulator_ops s2mpu02_buck_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .is_enabled = regulator_is_enabled_regmap, - .enable = s2mps14_regulator_enable, + .enable = s2mps11_regulator_enable, .disable = regulator_disable_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, - .set_suspend_disable = s2mps14_regulator_set_suspend_disable, + .set_suspend_disable = s2mps11_regulator_set_suspend_disable, .set_ramp_delay = s2mpu02_set_ramp_delay, }; diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index bb9d1a083299..6ca27e9d5ef7 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -574,7 +574,9 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, 0, GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE, "s5m8767"); - if (IS_ERR(rdata->ext_control_gpiod)) + if (PTR_ERR(rdata->ext_control_gpiod) == -ENOENT) + rdata->ext_control_gpiod = NULL; + else if (IS_ERR(rdata->ext_control_gpiod)) return PTR_ERR(rdata->ext_control_gpiod); rdata->id = i; diff --git a/drivers/regulator/slg51000-regulator.c b/drivers/regulator/slg51000-regulator.c new file mode 100644 index 000000000000..04b732991d69 --- /dev/null +++ b/drivers/regulator/slg51000-regulator.c @@ -0,0 +1,523 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// SLG51000 High PSRR, Multi-Output Regulators +// Copyright (C) 2019 Dialog Semiconductor +// +// Author: Eric Jeong <eric.jeong.opensource@diasemi.com> + +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include "slg51000-regulator.h" + +#define SLG51000_SCTL_EVT 7 +#define SLG51000_MAX_EVT_REGISTER 8 +#define SLG51000_LDOHP_LV_MIN 1200000 +#define SLG51000_LDOHP_HV_MIN 2400000 + +enum slg51000_regulators { + SLG51000_REGULATOR_LDO1 = 0, + SLG51000_REGULATOR_LDO2, + SLG51000_REGULATOR_LDO3, + SLG51000_REGULATOR_LDO4, + SLG51000_REGULATOR_LDO5, + SLG51000_REGULATOR_LDO6, + SLG51000_REGULATOR_LDO7, + SLG51000_MAX_REGULATORS, +}; + +struct slg51000 { + struct device *dev; + struct regmap *regmap; + struct regulator_desc *rdesc[SLG51000_MAX_REGULATORS]; + struct regulator_dev *rdev[SLG51000_MAX_REGULATORS]; + struct gpio_desc *cs_gpiod; + int chip_irq; +}; + +struct slg51000_evt_sta { + unsigned int ereg; + unsigned int sreg; +}; + +static const struct slg51000_evt_sta es_reg[SLG51000_MAX_EVT_REGISTER] = { + {SLG51000_LDO1_EVENT, SLG51000_LDO1_STATUS}, + {SLG51000_LDO2_EVENT, SLG51000_LDO2_STATUS}, + {SLG51000_LDO3_EVENT, SLG51000_LDO3_STATUS}, + {SLG51000_LDO4_EVENT, SLG51000_LDO4_STATUS}, + {SLG51000_LDO5_EVENT, SLG51000_LDO5_STATUS}, + {SLG51000_LDO6_EVENT, SLG51000_LDO6_STATUS}, + {SLG51000_LDO7_EVENT, SLG51000_LDO7_STATUS}, + {SLG51000_SYSCTL_EVENT, SLG51000_SYSCTL_STATUS}, +}; + +static const struct regmap_range slg51000_writeable_ranges[] = { + regmap_reg_range(SLG51000_SYSCTL_MATRIX_CONF_A, + SLG51000_SYSCTL_MATRIX_CONF_A), + regmap_reg_range(SLG51000_LDO1_VSEL, SLG51000_LDO1_VSEL), + regmap_reg_range(SLG51000_LDO1_MINV, SLG51000_LDO1_MAXV), + regmap_reg_range(SLG51000_LDO1_IRQ_MASK, SLG51000_LDO1_IRQ_MASK), + regmap_reg_range(SLG51000_LDO2_VSEL, SLG51000_LDO2_VSEL), + regmap_reg_range(SLG51000_LDO2_MINV, SLG51000_LDO2_MAXV), + regmap_reg_range(SLG51000_LDO2_IRQ_MASK, SLG51000_LDO2_IRQ_MASK), + regmap_reg_range(SLG51000_LDO3_VSEL, SLG51000_LDO3_VSEL), + regmap_reg_range(SLG51000_LDO3_MINV, SLG51000_LDO3_MAXV), + regmap_reg_range(SLG51000_LDO3_IRQ_MASK, SLG51000_LDO3_IRQ_MASK), + regmap_reg_range(SLG51000_LDO4_VSEL, SLG51000_LDO4_VSEL), + regmap_reg_range(SLG51000_LDO4_MINV, SLG51000_LDO4_MAXV), + regmap_reg_range(SLG51000_LDO4_IRQ_MASK, SLG51000_LDO4_IRQ_MASK), + regmap_reg_range(SLG51000_LDO5_VSEL, SLG51000_LDO5_VSEL), + regmap_reg_range(SLG51000_LDO5_MINV, SLG51000_LDO5_MAXV), + regmap_reg_range(SLG51000_LDO5_IRQ_MASK, SLG51000_LDO5_IRQ_MASK), + regmap_reg_range(SLG51000_LDO6_VSEL, SLG51000_LDO6_VSEL), + regmap_reg_range(SLG51000_LDO6_MINV, SLG51000_LDO6_MAXV), + regmap_reg_range(SLG51000_LDO6_IRQ_MASK, SLG51000_LDO6_IRQ_MASK), + regmap_reg_range(SLG51000_LDO7_VSEL, SLG51000_LDO7_VSEL), + regmap_reg_range(SLG51000_LDO7_MINV, SLG51000_LDO7_MAXV), + regmap_reg_range(SLG51000_LDO7_IRQ_MASK, SLG51000_LDO7_IRQ_MASK), + regmap_reg_range(SLG51000_OTP_IRQ_MASK, SLG51000_OTP_IRQ_MASK), +}; + +static const struct regmap_range slg51000_readable_ranges[] = { + regmap_reg_range(SLG51000_SYSCTL_PATN_ID_B0, + SLG51000_SYSCTL_PATN_ID_B2), + regmap_reg_range(SLG51000_SYSCTL_SYS_CONF_A, + SLG51000_SYSCTL_SYS_CONF_A), + regmap_reg_range(SLG51000_SYSCTL_SYS_CONF_D, + SLG51000_SYSCTL_MATRIX_CONF_B), + regmap_reg_range(SLG51000_SYSCTL_REFGEN_CONF_C, + SLG51000_SYSCTL_UVLO_CONF_A), + regmap_reg_range(SLG51000_SYSCTL_FAULT_LOG1, SLG51000_SYSCTL_IRQ_MASK), + regmap_reg_range(SLG51000_IO_GPIO1_CONF, SLG51000_IO_GPIO_STATUS), + regmap_reg_range(SLG51000_LUTARRAY_LUT_VAL_0, + SLG51000_LUTARRAY_LUT_VAL_11), + regmap_reg_range(SLG51000_MUXARRAY_INPUT_SEL_0, + SLG51000_MUXARRAY_INPUT_SEL_63), + regmap_reg_range(SLG51000_PWRSEQ_RESOURCE_EN_0, + SLG51000_PWRSEQ_INPUT_SENSE_CONF_B), + regmap_reg_range(SLG51000_LDO1_VSEL, SLG51000_LDO1_VSEL), + regmap_reg_range(SLG51000_LDO1_MINV, SLG51000_LDO1_MAXV), + regmap_reg_range(SLG51000_LDO1_MISC1, SLG51000_LDO1_VSEL_ACTUAL), + regmap_reg_range(SLG51000_LDO1_EVENT, SLG51000_LDO1_IRQ_MASK), + regmap_reg_range(SLG51000_LDO2_VSEL, SLG51000_LDO2_VSEL), + regmap_reg_range(SLG51000_LDO2_MINV, SLG51000_LDO2_MAXV), + regmap_reg_range(SLG51000_LDO2_MISC1, SLG51000_LDO2_VSEL_ACTUAL), + regmap_reg_range(SLG51000_LDO2_EVENT, SLG51000_LDO2_IRQ_MASK), + regmap_reg_range(SLG51000_LDO3_VSEL, SLG51000_LDO3_VSEL), + regmap_reg_range(SLG51000_LDO3_MINV, SLG51000_LDO3_MAXV), + regmap_reg_range(SLG51000_LDO3_CONF1, SLG51000_LDO3_VSEL_ACTUAL), + regmap_reg_range(SLG51000_LDO3_EVENT, SLG51000_LDO3_IRQ_MASK), + regmap_reg_range(SLG51000_LDO4_VSEL, SLG51000_LDO4_VSEL), + regmap_reg_range(SLG51000_LDO4_MINV, SLG51000_LDO4_MAXV), + regmap_reg_range(SLG51000_LDO4_CONF1, SLG51000_LDO4_VSEL_ACTUAL), + regmap_reg_range(SLG51000_LDO4_EVENT, SLG51000_LDO4_IRQ_MASK), + regmap_reg_range(SLG51000_LDO5_VSEL, SLG51000_LDO5_VSEL), + regmap_reg_range(SLG51000_LDO5_MINV, SLG51000_LDO5_MAXV), + regmap_reg_range(SLG51000_LDO5_TRIM2, SLG51000_LDO5_TRIM2), + regmap_reg_range(SLG51000_LDO5_CONF1, SLG51000_LDO5_VSEL_ACTUAL), + regmap_reg_range(SLG51000_LDO5_EVENT, SLG51000_LDO5_IRQ_MASK), + regmap_reg_range(SLG51000_LDO6_VSEL, SLG51000_LDO6_VSEL), + regmap_reg_range(SLG51000_LDO6_MINV, SLG51000_LDO6_MAXV), + regmap_reg_range(SLG51000_LDO6_TRIM2, SLG51000_LDO6_TRIM2), + regmap_reg_range(SLG51000_LDO6_CONF1, SLG51000_LDO6_VSEL_ACTUAL), + regmap_reg_range(SLG51000_LDO6_EVENT, SLG51000_LDO6_IRQ_MASK), + regmap_reg_range(SLG51000_LDO7_VSEL, SLG51000_LDO7_VSEL), + regmap_reg_range(SLG51000_LDO7_MINV, SLG51000_LDO7_MAXV), + regmap_reg_range(SLG51000_LDO7_CONF1, SLG51000_LDO7_VSEL_ACTUAL), + regmap_reg_range(SLG51000_LDO7_EVENT, SLG51000_LDO7_IRQ_MASK), + regmap_reg_range(SLG51000_OTP_EVENT, SLG51000_OTP_EVENT), + regmap_reg_range(SLG51000_OTP_IRQ_MASK, SLG51000_OTP_IRQ_MASK), + regmap_reg_range(SLG51000_OTP_LOCK_OTP_PROG, SLG51000_OTP_LOCK_CTRL), + regmap_reg_range(SLG51000_LOCK_GLOBAL_LOCK_CTRL1, + SLG51000_LOCK_GLOBAL_LOCK_CTRL1), +}; + +static const struct regmap_range slg51000_volatile_ranges[] = { + regmap_reg_range(SLG51000_SYSCTL_FAULT_LOG1, SLG51000_SYSCTL_STATUS), + regmap_reg_range(SLG51000_IO_GPIO_STATUS, SLG51000_IO_GPIO_STATUS), + regmap_reg_range(SLG51000_LDO1_EVENT, SLG51000_LDO1_STATUS), + regmap_reg_range(SLG51000_LDO2_EVENT, SLG51000_LDO2_STATUS), + regmap_reg_range(SLG51000_LDO3_EVENT, SLG51000_LDO3_STATUS), + regmap_reg_range(SLG51000_LDO4_EVENT, SLG51000_LDO4_STATUS), + regmap_reg_range(SLG51000_LDO5_EVENT, SLG51000_LDO5_STATUS), + regmap_reg_range(SLG51000_LDO6_EVENT, SLG51000_LDO6_STATUS), + regmap_reg_range(SLG51000_LDO7_EVENT, SLG51000_LDO7_STATUS), + regmap_reg_range(SLG51000_OTP_EVENT, SLG51000_OTP_EVENT), +}; + +static const struct regmap_access_table slg51000_writeable_table = { + .yes_ranges = slg51000_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(slg51000_writeable_ranges), +}; + +static const struct regmap_access_table slg51000_readable_table = { + .yes_ranges = slg51000_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(slg51000_readable_ranges), +}; + +static const struct regmap_access_table slg51000_volatile_table = { + .yes_ranges = slg51000_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(slg51000_volatile_ranges), +}; + +static const struct regmap_config slg51000_regmap_config = { + .reg_bits = 16, + .val_bits = 8, + .max_register = 0x8000, + .wr_table = &slg51000_writeable_table, + .rd_table = &slg51000_readable_table, + .volatile_table = &slg51000_volatile_table, +}; + +static const struct regulator_ops slg51000_regl_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static const struct regulator_ops slg51000_switch_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static int slg51000_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + struct slg51000 *chip = config->driver_data; + struct gpio_desc *ena_gpiod; + enum gpiod_flags gflags = GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE; + + ena_gpiod = devm_gpiod_get_from_of_node(chip->dev, np, + "enable-gpios", 0, + gflags, "gpio-en-ldo"); + if (ena_gpiod) { + config->ena_gpiod = ena_gpiod; + devm_gpiod_unhinge(chip->dev, config->ena_gpiod); + } + + return 0; +} + +#define SLG51000_REGL_DESC(_id, _name, _s_name, _min, _step) \ + [SLG51000_REGULATOR_##_id] = { \ + .name = #_name, \ + .supply_name = _s_name, \ + .id = SLG51000_REGULATOR_##_id, \ + .of_match = of_match_ptr(#_name), \ + .of_parse_cb = slg51000_of_parse_cb, \ + .ops = &slg51000_regl_ops, \ + .regulators_node = of_match_ptr("regulators"), \ + .n_voltages = 256, \ + .min_uV = _min, \ + .uV_step = _step, \ + .linear_min_sel = 0, \ + .vsel_mask = SLG51000_VSEL_MASK, \ + .vsel_reg = SLG51000_##_id##_VSEL, \ + .enable_reg = SLG51000_SYSCTL_MATRIX_CONF_A, \ + .enable_mask = BIT(SLG51000_REGULATOR_##_id), \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + } + +static struct regulator_desc regls_desc[SLG51000_MAX_REGULATORS] = { + SLG51000_REGL_DESC(LDO1, ldo1, NULL, 2400000, 5000), + SLG51000_REGL_DESC(LDO2, ldo2, NULL, 2400000, 5000), + SLG51000_REGL_DESC(LDO3, ldo3, "vin3", 1200000, 10000), + SLG51000_REGL_DESC(LDO4, ldo4, "vin4", 1200000, 10000), + SLG51000_REGL_DESC(LDO5, ldo5, "vin5", 400000, 5000), + SLG51000_REGL_DESC(LDO6, ldo6, "vin6", 400000, 5000), + SLG51000_REGL_DESC(LDO7, ldo7, "vin7", 1200000, 10000), +}; + +static int slg51000_regulator_init(struct slg51000 *chip) +{ + struct regulator_config config = { }; + struct regulator_desc *rdesc; + unsigned int reg, val; + u8 vsel_range[2]; + int id, ret = 0; + const unsigned int min_regs[SLG51000_MAX_REGULATORS] = { + SLG51000_LDO1_MINV, SLG51000_LDO2_MINV, SLG51000_LDO3_MINV, + SLG51000_LDO4_MINV, SLG51000_LDO5_MINV, SLG51000_LDO6_MINV, + SLG51000_LDO7_MINV, + }; + + for (id = 0; id < SLG51000_MAX_REGULATORS; id++) { + chip->rdesc[id] = ®ls_desc[id]; + rdesc = chip->rdesc[id]; + config.regmap = chip->regmap; + config.dev = chip->dev; + config.driver_data = chip; + + ret = regmap_bulk_read(chip->regmap, min_regs[id], + vsel_range, 2); + if (ret < 0) { + dev_err(chip->dev, + "Failed to read the MIN register\n"); + return ret; + } + + switch (id) { + case SLG51000_REGULATOR_LDO1: + case SLG51000_REGULATOR_LDO2: + if (id == SLG51000_REGULATOR_LDO1) + reg = SLG51000_LDO1_MISC1; + else + reg = SLG51000_LDO2_MISC1; + + ret = regmap_read(chip->regmap, reg, &val); + if (ret < 0) { + dev_err(chip->dev, + "Failed to read voltage range of ldo%d\n", + id + 1); + return ret; + } + + rdesc->linear_min_sel = vsel_range[0]; + rdesc->n_voltages = vsel_range[1] + 1; + if (val & SLG51000_SEL_VRANGE_MASK) + rdesc->min_uV = SLG51000_LDOHP_HV_MIN + + (vsel_range[0] + * rdesc->uV_step); + else + rdesc->min_uV = SLG51000_LDOHP_LV_MIN + + (vsel_range[0] + * rdesc->uV_step); + break; + + case SLG51000_REGULATOR_LDO5: + case SLG51000_REGULATOR_LDO6: + if (id == SLG51000_REGULATOR_LDO5) + reg = SLG51000_LDO5_TRIM2; + else + reg = SLG51000_LDO6_TRIM2; + + ret = regmap_read(chip->regmap, reg, &val); + if (ret < 0) { + dev_err(chip->dev, + "Failed to read LDO mode register\n"); + return ret; + } + + if (val & SLG51000_SEL_BYP_MODE_MASK) { + rdesc->ops = &slg51000_switch_ops; + rdesc->n_voltages = 0; + rdesc->min_uV = 0; + rdesc->uV_step = 0; + rdesc->linear_min_sel = 0; + break; + } + /* Fall through - to the check below.*/ + + default: + rdesc->linear_min_sel = vsel_range[0]; + rdesc->n_voltages = vsel_range[1] + 1; + rdesc->min_uV = rdesc->min_uV + + (vsel_range[0] * rdesc->uV_step); + break; + } + + chip->rdev[id] = devm_regulator_register(chip->dev, rdesc, + &config); + if (IS_ERR(chip->rdev[id])) { + ret = PTR_ERR(chip->rdev[id]); + dev_err(chip->dev, + "Failed to register regulator(%s):%d\n", + chip->rdesc[id]->name, ret); + return ret; + } + } + + return 0; +} + +static irqreturn_t slg51000_irq_handler(int irq, void *data) +{ + struct slg51000 *chip = data; + struct regmap *regmap = chip->regmap; + enum { R0 = 0, R1, R2, REG_MAX }; + u8 evt[SLG51000_MAX_EVT_REGISTER][REG_MAX]; + int ret, i, handled = IRQ_NONE; + unsigned int evt_otp, mask_otp; + + /* Read event[R0], status[R1] and mask[R2] register */ + for (i = 0; i < SLG51000_MAX_EVT_REGISTER; i++) { + ret = regmap_bulk_read(regmap, es_reg[i].ereg, evt[i], REG_MAX); + if (ret < 0) { + dev_err(chip->dev, + "Failed to read event registers(%d)\n", ret); + return IRQ_NONE; + } + } + + ret = regmap_read(regmap, SLG51000_OTP_EVENT, &evt_otp); + if (ret < 0) { + dev_err(chip->dev, + "Failed to read otp event registers(%d)\n", ret); + return IRQ_NONE; + } + + ret = regmap_read(regmap, SLG51000_OTP_IRQ_MASK, &mask_otp); + if (ret < 0) { + dev_err(chip->dev, + "Failed to read otp mask register(%d)\n", ret); + return IRQ_NONE; + } + + if ((evt_otp & SLG51000_EVT_CRC_MASK) && + !(mask_otp & SLG51000_IRQ_CRC_MASK)) { + dev_info(chip->dev, + "OTP has been read or OTP crc is not zero\n"); + handled = IRQ_HANDLED; + } + + for (i = 0; i < SLG51000_MAX_REGULATORS; i++) { + if (!(evt[i][R2] & SLG51000_IRQ_ILIM_FLAG_MASK) && + (evt[i][R0] & SLG51000_EVT_ILIM_FLAG_MASK)) { + regulator_lock(chip->rdev[i]); + regulator_notifier_call_chain(chip->rdev[i], + REGULATOR_EVENT_OVER_CURRENT, NULL); + regulator_unlock(chip->rdev[i]); + + if (evt[i][R1] & SLG51000_STA_ILIM_FLAG_MASK) + dev_warn(chip->dev, + "Over-current limit(ldo%d)\n", i + 1); + handled = IRQ_HANDLED; + } + } + + if (!(evt[SLG51000_SCTL_EVT][R2] & SLG51000_IRQ_HIGH_TEMP_WARN_MASK) && + (evt[SLG51000_SCTL_EVT][R0] & SLG51000_EVT_HIGH_TEMP_WARN_MASK)) { + for (i = 0; i < SLG51000_MAX_REGULATORS; i++) { + if (!(evt[i][R1] & SLG51000_STA_ILIM_FLAG_MASK) && + (evt[i][R1] & SLG51000_STA_VOUT_OK_FLAG_MASK)) { + regulator_lock(chip->rdev[i]); + regulator_notifier_call_chain(chip->rdev[i], + REGULATOR_EVENT_OVER_TEMP, NULL); + regulator_unlock(chip->rdev[i]); + } + } + handled = IRQ_HANDLED; + if (evt[SLG51000_SCTL_EVT][R1] & + SLG51000_STA_HIGH_TEMP_WARN_MASK) + dev_warn(chip->dev, "High temperature warning!\n"); + } + + return handled; +} + +static void slg51000_clear_fault_log(struct slg51000 *chip) +{ + unsigned int val = 0; + int ret = 0; + + ret = regmap_read(chip->regmap, SLG51000_SYSCTL_FAULT_LOG1, &val); + if (ret < 0) { + dev_err(chip->dev, "Failed to read Fault log register\n"); + return; + } + + if (val & SLG51000_FLT_OVER_TEMP_MASK) + dev_dbg(chip->dev, "Fault log: FLT_OVER_TEMP\n"); + if (val & SLG51000_FLT_POWER_SEQ_CRASH_REQ_MASK) + dev_dbg(chip->dev, "Fault log: FLT_POWER_SEQ_CRASH_REQ\n"); + if (val & SLG51000_FLT_RST_MASK) + dev_dbg(chip->dev, "Fault log: FLT_RST\n"); + if (val & SLG51000_FLT_POR_MASK) + dev_dbg(chip->dev, "Fault log: FLT_POR\n"); +} + +static int slg51000_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct slg51000 *chip; + struct gpio_desc *cs_gpiod = NULL; + int error, ret; + + chip = devm_kzalloc(dev, sizeof(struct slg51000), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + cs_gpiod = devm_gpiod_get_from_of_node(dev, dev->of_node, + "dlg,cs-gpios", 0, + GPIOD_OUT_HIGH + | GPIOD_FLAGS_BIT_NONEXCLUSIVE, + "slg51000-cs"); + if (cs_gpiod) { + dev_info(dev, "Found chip selector property\n"); + chip->cs_gpiod = cs_gpiod; + } + + i2c_set_clientdata(client, chip); + chip->chip_irq = client->irq; + chip->dev = dev; + chip->regmap = devm_regmap_init_i2c(client, &slg51000_regmap_config); + if (IS_ERR(chip->regmap)) { + error = PTR_ERR(chip->regmap); + dev_err(dev, "Failed to allocate register map: %d\n", + error); + return error; + } + + ret = slg51000_regulator_init(chip); + if (ret < 0) { + dev_err(chip->dev, "Failed to init regulator(%d)\n", ret); + return ret; + } + + slg51000_clear_fault_log(chip); + + if (chip->chip_irq) { + ret = devm_request_threaded_irq(dev, chip->chip_irq, NULL, + slg51000_irq_handler, + (IRQF_TRIGGER_HIGH | + IRQF_ONESHOT), + "slg51000-irq", chip); + if (ret != 0) { + dev_err(dev, "Failed to request IRQ: %d\n", + chip->chip_irq); + return ret; + } + } else { + dev_info(dev, "No IRQ configured\n"); + } + + return ret; +} + +static const struct i2c_device_id slg51000_i2c_id[] = { + {"slg51000", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, slg51000_i2c_id); + +static struct i2c_driver slg51000_regulator_driver = { + .driver = { + .name = "slg51000-regulator", + }, + .probe = slg51000_i2c_probe, + .id_table = slg51000_i2c_id, +}; + +module_i2c_driver(slg51000_regulator_driver); + +MODULE_AUTHOR("Eric Jeong <eric.jeong.opensource@diasemi.com>"); +MODULE_DESCRIPTION("SLG51000 regulator driver"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/regulator/slg51000-regulator.h b/drivers/regulator/slg51000-regulator.h new file mode 100644 index 000000000000..20feb7f91942 --- /dev/null +++ b/drivers/regulator/slg51000-regulator.h @@ -0,0 +1,505 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * SLG51000 High PSRR, Multi-Output Regulators + * Copyright (C) 2019 Dialog Semiconductor + * + * Author: Eric Jeong <eric.jeong.opensource@diasemi.com> + */ + +#ifndef __SLG51000_REGISTERS_H__ +#define __SLG51000_REGISTERS_H__ + +/* Registers */ + +#define SLG51000_SYSCTL_PATN_ID_B0 0x1105 +#define SLG51000_SYSCTL_PATN_ID_B1 0x1106 +#define SLG51000_SYSCTL_PATN_ID_B2 0x1107 +#define SLG51000_SYSCTL_SYS_CONF_A 0x1109 +#define SLG51000_SYSCTL_SYS_CONF_D 0x110c +#define SLG51000_SYSCTL_MATRIX_CONF_A 0x110d +#define SLG51000_SYSCTL_MATRIX_CONF_B 0x110e +#define SLG51000_SYSCTL_REFGEN_CONF_C 0x1111 +#define SLG51000_SYSCTL_UVLO_CONF_A 0x1112 +#define SLG51000_SYSCTL_FAULT_LOG1 0x1115 +#define SLG51000_SYSCTL_EVENT 0x1116 +#define SLG51000_SYSCTL_STATUS 0x1117 +#define SLG51000_SYSCTL_IRQ_MASK 0x1118 +#define SLG51000_IO_GPIO1_CONF 0x1500 +#define SLG51000_IO_GPIO2_CONF 0x1501 +#define SLG51000_IO_GPIO3_CONF 0x1502 +#define SLG51000_IO_GPIO4_CONF 0x1503 +#define SLG51000_IO_GPIO5_CONF 0x1504 +#define SLG51000_IO_GPIO6_CONF 0x1505 +#define SLG51000_IO_GPIO_STATUS 0x1506 +#define SLG51000_LUTARRAY_LUT_VAL_0 0x1600 +#define SLG51000_LUTARRAY_LUT_VAL_1 0x1601 +#define SLG51000_LUTARRAY_LUT_VAL_2 0x1602 +#define SLG51000_LUTARRAY_LUT_VAL_3 0x1603 +#define SLG51000_LUTARRAY_LUT_VAL_4 0x1604 +#define SLG51000_LUTARRAY_LUT_VAL_5 0x1605 +#define SLG51000_LUTARRAY_LUT_VAL_6 0x1606 +#define SLG51000_LUTARRAY_LUT_VAL_7 0x1607 +#define SLG51000_LUTARRAY_LUT_VAL_8 0x1608 +#define SLG51000_LUTARRAY_LUT_VAL_9 0x1609 +#define SLG51000_LUTARRAY_LUT_VAL_10 0x160a +#define SLG51000_LUTARRAY_LUT_VAL_11 0x160b +#define SLG51000_MUXARRAY_INPUT_SEL_0 0x1700 +#define SLG51000_MUXARRAY_INPUT_SEL_1 0x1701 +#define SLG51000_MUXARRAY_INPUT_SEL_2 0x1702 +#define SLG51000_MUXARRAY_INPUT_SEL_3 0x1703 +#define SLG51000_MUXARRAY_INPUT_SEL_4 0x1704 +#define SLG51000_MUXARRAY_INPUT_SEL_5 0x1705 +#define SLG51000_MUXARRAY_INPUT_SEL_6 0x1706 +#define SLG51000_MUXARRAY_INPUT_SEL_7 0x1707 +#define SLG51000_MUXARRAY_INPUT_SEL_8 0x1708 +#define SLG51000_MUXARRAY_INPUT_SEL_9 0x1709 +#define SLG51000_MUXARRAY_INPUT_SEL_10 0x170a +#define SLG51000_MUXARRAY_INPUT_SEL_11 0x170b +#define SLG51000_MUXARRAY_INPUT_SEL_12 0x170c +#define SLG51000_MUXARRAY_INPUT_SEL_13 0x170d +#define SLG51000_MUXARRAY_INPUT_SEL_14 0x170e +#define SLG51000_MUXARRAY_INPUT_SEL_15 0x170f +#define SLG51000_MUXARRAY_INPUT_SEL_16 0x1710 +#define SLG51000_MUXARRAY_INPUT_SEL_17 0x1711 +#define SLG51000_MUXARRAY_INPUT_SEL_18 0x1712 +#define SLG51000_MUXARRAY_INPUT_SEL_19 0x1713 +#define SLG51000_MUXARRAY_INPUT_SEL_20 0x1714 +#define SLG51000_MUXARRAY_INPUT_SEL_21 0x1715 +#define SLG51000_MUXARRAY_INPUT_SEL_22 0x1716 +#define SLG51000_MUXARRAY_INPUT_SEL_23 0x1717 +#define SLG51000_MUXARRAY_INPUT_SEL_24 0x1718 +#define SLG51000_MUXARRAY_INPUT_SEL_25 0x1719 +#define SLG51000_MUXARRAY_INPUT_SEL_26 0x171a +#define SLG51000_MUXARRAY_INPUT_SEL_27 0x171b +#define SLG51000_MUXARRAY_INPUT_SEL_28 0x171c +#define SLG51000_MUXARRAY_INPUT_SEL_29 0x171d +#define SLG51000_MUXARRAY_INPUT_SEL_30 0x171e +#define SLG51000_MUXARRAY_INPUT_SEL_31 0x171f +#define SLG51000_MUXARRAY_INPUT_SEL_32 0x1720 +#define SLG51000_MUXARRAY_INPUT_SEL_33 0x1721 +#define SLG51000_MUXARRAY_INPUT_SEL_34 0x1722 +#define SLG51000_MUXARRAY_INPUT_SEL_35 0x1723 +#define SLG51000_MUXARRAY_INPUT_SEL_36 0x1724 +#define SLG51000_MUXARRAY_INPUT_SEL_37 0x1725 +#define SLG51000_MUXARRAY_INPUT_SEL_38 0x1726 +#define SLG51000_MUXARRAY_INPUT_SEL_39 0x1727 +#define SLG51000_MUXARRAY_INPUT_SEL_40 0x1728 +#define SLG51000_MUXARRAY_INPUT_SEL_41 0x1729 +#define SLG51000_MUXARRAY_INPUT_SEL_42 0x172a +#define SLG51000_MUXARRAY_INPUT_SEL_43 0x172b +#define SLG51000_MUXARRAY_INPUT_SEL_44 0x172c +#define SLG51000_MUXARRAY_INPUT_SEL_45 0x172d +#define SLG51000_MUXARRAY_INPUT_SEL_46 0x172e +#define SLG51000_MUXARRAY_INPUT_SEL_47 0x172f +#define SLG51000_MUXARRAY_INPUT_SEL_48 0x1730 +#define SLG51000_MUXARRAY_INPUT_SEL_49 0x1731 +#define SLG51000_MUXARRAY_INPUT_SEL_50 0x1732 +#define SLG51000_MUXARRAY_INPUT_SEL_51 0x1733 +#define SLG51000_MUXARRAY_INPUT_SEL_52 0x1734 +#define SLG51000_MUXARRAY_INPUT_SEL_53 0x1735 +#define SLG51000_MUXARRAY_INPUT_SEL_54 0x1736 +#define SLG51000_MUXARRAY_INPUT_SEL_55 0x1737 +#define SLG51000_MUXARRAY_INPUT_SEL_56 0x1738 +#define SLG51000_MUXARRAY_INPUT_SEL_57 0x1739 +#define SLG51000_MUXARRAY_INPUT_SEL_58 0x173a +#define SLG51000_MUXARRAY_INPUT_SEL_59 0x173b +#define SLG51000_MUXARRAY_INPUT_SEL_60 0x173c +#define SLG51000_MUXARRAY_INPUT_SEL_61 0x173d +#define SLG51000_MUXARRAY_INPUT_SEL_62 0x173e +#define SLG51000_MUXARRAY_INPUT_SEL_63 0x173f +#define SLG51000_PWRSEQ_RESOURCE_EN_0 0x1900 +#define SLG51000_PWRSEQ_RESOURCE_EN_1 0x1901 +#define SLG51000_PWRSEQ_RESOURCE_EN_2 0x1902 +#define SLG51000_PWRSEQ_RESOURCE_EN_3 0x1903 +#define SLG51000_PWRSEQ_RESOURCE_EN_4 0x1904 +#define SLG51000_PWRSEQ_RESOURCE_EN_5 0x1905 +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_UP0 0x1906 +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_DOWN0 0x1907 +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_UP1 0x1908 +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_DOWN1 0x1909 +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_UP2 0x190a +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_DOWN2 0x190b +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_UP3 0x190c +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_DOWN3 0x190d +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_UP4 0x190e +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_DOWN4 0x190f +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_UP5 0x1910 +#define SLG51000_PWRSEQ_SLOT_TIME_MIN_DOWN5 0x1911 +#define SLG51000_PWRSEQ_SLOT_TIME_MAX_CONF_A 0x1912 +#define SLG51000_PWRSEQ_SLOT_TIME_MAX_CONF_B 0x1913 +#define SLG51000_PWRSEQ_SLOT_TIME_MAX_CONF_C 0x1914 +#define SLG51000_PWRSEQ_INPUT_SENSE_CONF_A 0x1915 +#define SLG51000_PWRSEQ_INPUT_SENSE_CONF_B 0x1916 +#define SLG51000_LDO1_VSEL 0x2000 +#define SLG51000_LDO1_MINV 0x2060 +#define SLG51000_LDO1_MAXV 0x2061 +#define SLG51000_LDO1_MISC1 0x2064 +#define SLG51000_LDO1_VSEL_ACTUAL 0x2065 +#define SLG51000_LDO1_EVENT 0x20c0 +#define SLG51000_LDO1_STATUS 0x20c1 +#define SLG51000_LDO1_IRQ_MASK 0x20c2 +#define SLG51000_LDO2_VSEL 0x2200 +#define SLG51000_LDO2_MINV 0x2260 +#define SLG51000_LDO2_MAXV 0x2261 +#define SLG51000_LDO2_MISC1 0x2264 +#define SLG51000_LDO2_VSEL_ACTUAL 0x2265 +#define SLG51000_LDO2_EVENT 0x22c0 +#define SLG51000_LDO2_STATUS 0x22c1 +#define SLG51000_LDO2_IRQ_MASK 0x22c2 +#define SLG51000_LDO3_VSEL 0x2300 +#define SLG51000_LDO3_MINV 0x2360 +#define SLG51000_LDO3_MAXV 0x2361 +#define SLG51000_LDO3_CONF1 0x2364 +#define SLG51000_LDO3_CONF2 0x2365 +#define SLG51000_LDO3_VSEL_ACTUAL 0x2366 +#define SLG51000_LDO3_EVENT 0x23c0 +#define SLG51000_LDO3_STATUS 0x23c1 +#define SLG51000_LDO3_IRQ_MASK 0x23c2 +#define SLG51000_LDO4_VSEL 0x2500 +#define SLG51000_LDO4_MINV 0x2560 +#define SLG51000_LDO4_MAXV 0x2561 +#define SLG51000_LDO4_CONF1 0x2564 +#define SLG51000_LDO4_CONF2 0x2565 +#define SLG51000_LDO4_VSEL_ACTUAL 0x2566 +#define SLG51000_LDO4_EVENT 0x25c0 +#define SLG51000_LDO4_STATUS 0x25c1 +#define SLG51000_LDO4_IRQ_MASK 0x25c2 +#define SLG51000_LDO5_VSEL 0x2700 +#define SLG51000_LDO5_MINV 0x2760 +#define SLG51000_LDO5_MAXV 0x2761 +#define SLG51000_LDO5_TRIM2 0x2763 +#define SLG51000_LDO5_CONF1 0x2765 +#define SLG51000_LDO5_CONF2 0x2766 +#define SLG51000_LDO5_VSEL_ACTUAL 0x2767 +#define SLG51000_LDO5_EVENT 0x27c0 +#define SLG51000_LDO5_STATUS 0x27c1 +#define SLG51000_LDO5_IRQ_MASK 0x27c2 +#define SLG51000_LDO6_VSEL 0x2900 +#define SLG51000_LDO6_MINV 0x2960 +#define SLG51000_LDO6_MAXV 0x2961 +#define SLG51000_LDO6_TRIM2 0x2963 +#define SLG51000_LDO6_CONF1 0x2965 +#define SLG51000_LDO6_CONF2 0x2966 +#define SLG51000_LDO6_VSEL_ACTUAL 0x2967 +#define SLG51000_LDO6_EVENT 0x29c0 +#define SLG51000_LDO6_STATUS 0x29c1 +#define SLG51000_LDO6_IRQ_MASK 0x29c2 +#define SLG51000_LDO7_VSEL 0x3100 +#define SLG51000_LDO7_MINV 0x3160 +#define SLG51000_LDO7_MAXV 0x3161 +#define SLG51000_LDO7_CONF1 0x3164 +#define SLG51000_LDO7_CONF2 0x3165 +#define SLG51000_LDO7_VSEL_ACTUAL 0x3166 +#define SLG51000_LDO7_EVENT 0x31c0 +#define SLG51000_LDO7_STATUS 0x31c1 +#define SLG51000_LDO7_IRQ_MASK 0x31c2 +#define SLG51000_OTP_EVENT 0x782b +#define SLG51000_OTP_IRQ_MASK 0x782d +#define SLG51000_OTP_LOCK_OTP_PROG 0x78fe +#define SLG51000_OTP_LOCK_CTRL 0x78ff +#define SLG51000_LOCK_GLOBAL_LOCK_CTRL1 0x8000 + +/* Register Bit Fields */ + +/* SLG51000_SYSCTL_PATTERN_ID_BYTE0 = 0x1105 */ +#define SLG51000_PATTERN_ID_BYTE0_SHIFT 0 +#define SLG51000_PATTERN_ID_BYTE0_MASK (0xff << 0) + +/* SLG51000_SYSCTL_PATTERN_ID_BYTE1 = 0x1106 */ +#define SLG51000_PATTERN_ID_BYTE1_SHIFT 0 +#define SLG51000_PATTERN_ID_BYTE1_MASK (0xff << 0) + +/* SLG51000_SYSCTL_PATTERN_ID_BYTE2 = 0x1107 */ +#define SLG51000_PATTERN_ID_BYTE2_SHIFT 0 +#define SLG51000_PATTERN_ID_BYTE2_MASK (0xff << 0) + +/* SLG51000_SYSCTL_SYS_CONF_A = 0x1109 */ +#define SLG51000_I2C_ADDRESS_SHIFT 0 +#define SLG51000_I2C_ADDRESS_MASK (0x7f << 0) +#define SLG51000_I2C_DISABLE_SHIFT 7 +#define SLG51000_I2C_DISABLE_MASK (0x01 << 7) + +/* SLG51000_SYSCTL_SYS_CONF_D = 0x110c */ +#define SLG51000_CS_T_DEB_SHIFT 6 +#define SLG51000_CS_T_DEB_MASK (0x03 << 6) +#define SLG51000_I2C_CLR_MODE_SHIFT 5 +#define SLG51000_I2C_CLR_MODE_MASK (0x01 << 5) + +/* SLG51000_SYSCTL_MATRIX_CTRL_CONF_A = 0x110d */ +#define SLG51000_RESOURCE_CTRL_SHIFT 0 +#define SLG51000_RESOURCE_CTRL_MASK (0xff << 0) + +/* SLG51000_SYSCTL_MATRIX_CTRL_CONF_B = 0x110e */ +#define SLG51000_MATRIX_EVENT_SENSE_SHIFT 0 +#define SLG51000_MATRIX_EVENT_SENSE_MASK (0x07 << 0) + +/* SLG51000_SYSCTL_REFGEN_CONF_C = 0x1111 */ +#define SLG51000_REFGEN_SEL_TEMP_WARN_DEBOUNCE_SHIFT 2 +#define SLG51000_REFGEN_SEL_TEMP_WARN_DEBOUNCE_MASK (0x03 << 2) +#define SLG51000_REFGEN_SEL_TEMP_WARN_THR_SHIFT 0 +#define SLG51000_REFGEN_SEL_TEMP_WARN_THR_MASK (0x03 << 0) + +/* SLG51000_SYSCTL_UVLO_CONF_A = 0x1112 */ +#define SLG51000_VMON_UVLO_SEL_THR_SHIFT 0 +#define SLG51000_VMON_UVLO_SEL_THR_MASK (0x1f << 0) + +/* SLG51000_SYSCTL_FAULT_LOG1 = 0x1115 */ +#define SLG51000_FLT_POR_SHIFT 5 +#define SLG51000_FLT_POR_MASK (0x01 << 5) +#define SLG51000_FLT_RST_SHIFT 4 +#define SLG51000_FLT_RST_MASK (0x01 << 4) +#define SLG51000_FLT_POWER_SEQ_CRASH_REQ_SHIFT 2 +#define SLG51000_FLT_POWER_SEQ_CRASH_REQ_MASK (0x01 << 2) +#define SLG51000_FLT_OVER_TEMP_SHIFT 1 +#define SLG51000_FLT_OVER_TEMP_MASK (0x01 << 1) + +/* SLG51000_SYSCTL_EVENT = 0x1116 */ +#define SLG51000_EVT_MATRIX_SHIFT 1 +#define SLG51000_EVT_MATRIX_MASK (0x01 << 1) +#define SLG51000_EVT_HIGH_TEMP_WARN_SHIFT 0 +#define SLG51000_EVT_HIGH_TEMP_WARN_MASK (0x01 << 0) + +/* SLG51000_SYSCTL_STATUS = 0x1117 */ +#define SLG51000_STA_MATRIX_SHIFT 1 +#define SLG51000_STA_MATRIX_MASK (0x01 << 1) +#define SLG51000_STA_HIGH_TEMP_WARN_SHIFT 0 +#define SLG51000_STA_HIGH_TEMP_WARN_MASK (0x01 << 0) + +/* SLG51000_SYSCTL_IRQ_MASK = 0x1118 */ +#define SLG51000_IRQ_MATRIX_SHIFT 1 +#define SLG51000_IRQ_MATRIX_MASK (0x01 << 1) +#define SLG51000_IRQ_HIGH_TEMP_WARN_SHIFT 0 +#define SLG51000_IRQ_HIGH_TEMP_WARN_MASK (0x01 << 0) + +/* SLG51000_IO_GPIO1_CONF ~ SLG51000_IO_GPIO5_CONF = + * 0x1500, 0x1501, 0x1502, 0x1503, 0x1504 + */ +#define SLG51000_GPIO_DIR_SHIFT 7 +#define SLG51000_GPIO_DIR_MASK (0x01 << 7) +#define SLG51000_GPIO_SENS_SHIFT 5 +#define SLG51000_GPIO_SENS_MASK (0x03 << 5) +#define SLG51000_GPIO_INVERT_SHIFT 4 +#define SLG51000_GPIO_INVERT_MASK (0x01 << 4) +#define SLG51000_GPIO_BYP_SHIFT 3 +#define SLG51000_GPIO_BYP_MASK (0x01 << 3) +#define SLG51000_GPIO_T_DEB_SHIFT 1 +#define SLG51000_GPIO_T_DEB_MASK (0x03 << 1) +#define SLG51000_GPIO_LEVEL_SHIFT 0 +#define SLG51000_GPIO_LEVEL_MASK (0x01 << 0) + +/* SLG51000_IO_GPIO6_CONF = 0x1505 */ +#define SLG51000_GPIO6_SENS_SHIFT 5 +#define SLG51000_GPIO6_SENS_MASK (0x03 << 5) +#define SLG51000_GPIO6_INVERT_SHIFT 4 +#define SLG51000_GPIO6_INVERT_MASK (0x01 << 4) +#define SLG51000_GPIO6_T_DEB_SHIFT 1 +#define SLG51000_GPIO6_T_DEB_MASK (0x03 << 1) +#define SLG51000_GPIO6_LEVEL_SHIFT 0 +#define SLG51000_GPIO6_LEVEL_MASK (0x01 << 0) + +/* SLG51000_IO_GPIO_STATUS = 0x1506 */ +#define SLG51000_GPIO6_STATUS_SHIFT 5 +#define SLG51000_GPIO6_STATUS_MASK (0x01 << 5) +#define SLG51000_GPIO5_STATUS_SHIFT 4 +#define SLG51000_GPIO5_STATUS_MASK (0x01 << 4) +#define SLG51000_GPIO4_STATUS_SHIFT 3 +#define SLG51000_GPIO4_STATUS_MASK (0x01 << 3) +#define SLG51000_GPIO3_STATUS_SHIFT 2 +#define SLG51000_GPIO3_STATUS_MASK (0x01 << 2) +#define SLG51000_GPIO2_STATUS_SHIFT 1 +#define SLG51000_GPIO2_STATUS_MASK (0x01 << 1) +#define SLG51000_GPIO1_STATUS_SHIFT 0 +#define SLG51000_GPIO1_STATUS_MASK (0x01 << 0) + +/* SLG51000_LUTARRAY_LUT_VAL_0 ~ SLG51000_LUTARRAY_LUT_VAL_11 + * 0x1600, 0x1601, 0x1602, 0x1603, 0x1604, 0x1605, + * 0x1606, 0x1607, 0x1608, 0x1609, 0x160a, 0x160b + */ +#define SLG51000_LUT_VAL_SHIFT 0 +#define SLG51000_LUT_VAL_MASK (0xff << 0) + +/* SLG51000_MUXARRAY_INPUT_SEL_0 ~ SLG51000_MUXARRAY_INPUT_SEL_63 + * 0x1700, 0x1701, 0x1702, 0x1703, 0x1704, 0x1705, + * 0x1706, 0x1707, 0x1708, 0x1709, 0x170a, 0x170b, + * 0x170c, 0x170d, 0x170e, 0x170f, 0x1710, 0x1711, + * 0x1712, 0x1713, 0x1714, 0x1715, 0x1716, 0x1717, + * 0x1718, 0x1719, 0x171a, 0x171b, 0x171c, 0x171d, + * 0x171e, 0x171f, 0x1720, 0x1721, 0x1722, 0x1723, + * 0x1724, 0x1725, 0x1726, 0x1727, 0x1728, 0x1729, + * 0x173a, 0x173b, 0x173c, 0x173d, 0x173e, 0x173f, + */ +#define SLG51000_INPUT_SEL_SHIFT 0 +#define SLG51000_INPUT_SEL_MASK (0x3f << 0) + +/* SLG51000_PWRSEQ_RESOURCE_EN_0 ~ SLG51000_PWRSEQ_RESOURCE_EN_5 + * 0x1900, 0x1901, 0x1902, 0x1903, 0x1904, 0x1905 + */ +#define SLG51000_RESOURCE_EN_DOWN0_SHIFT 4 +#define SLG51000_RESOURCE_EN_DOWN0_MASK (0x07 << 4) +#define SLG51000_RESOURCE_EN_UP0_SHIFT 0 +#define SLG51000_RESOURCE_EN_UP0_MASK (0x07 << 0) + +/* SLG51000_PWRSEQ_SLOT_TIME_MIN_UP0 ~ SLG51000_PWRSEQ_SLOT_TIME_MIN_UP5 + * 0x1906, 0x1908, 0x190a, 0x190c, 0x190e, 0x1910 + */ +#define SLG51000_SLOT_TIME_MIN_UP_SHIFT 0 +#define SLG51000_SLOT_TIME_MIN_UP_MASK (0xff << 0) + +/* SLG51000_PWRSEQ_SLOT_TIME_MIN_DOWN0 ~ SLG51000_PWRSEQ_SLOT_TIME_MIN_DOWN5 + * 0x1907, 0x1909, 0x190b, 0x190d, 0x190f, 0x1911 + */ +#define SLG51000_SLOT_TIME_MIN_DOWN_SHIFT 0 +#define SLG51000_SLOT_TIME_MIN_DOWN_MASK (0xff << 0) + +/* SLG51000_PWRSEQ_SLOT_TIME_MAX_CONF_A ~ SLG51000_PWRSEQ_SLOT_TIME_MAX_CONF_C + * 0x1912, 0x1913, 0x1914 + */ +#define SLG51000_SLOT_TIME_MAX_DOWN1_SHIFT 6 +#define SLG51000_SLOT_TIME_MAX_DOWN1_MASK (0x03 << 6) +#define SLG51000_SLOT_TIME_MAX_UP1_SHIFT 4 +#define SLG51000_SLOT_TIME_MAX_UP1_MASK (0x03 << 4) +#define SLG51000_SLOT_TIME_MAX_DOWN0_SHIFT 2 +#define SLG51000_SLOT_TIME_MAX_DOWN0_MASK (0x03 << 2) +#define SLG51000_SLOT_TIME_MAX_UP0_SHIFT 0 +#define SLG51000_SLOT_TIME_MAX_UP0_MASK (0x03 << 0) + +/* SLG51000_PWRSEQ_INPUT_SENSE_CONF_A = 0x1915 */ +#define SLG51000_TRIG_UP_SENSE_SHIFT 6 +#define SLG51000_TRIG_UP_SENSE_MASK (0x01 << 6) +#define SLG51000_UP_EN_SENSE5_SHIFT 5 +#define SLG51000_UP_EN_SENSE5_MASK (0x01 << 5) +#define SLG51000_UP_EN_SENSE4_SHIFT 4 +#define SLG51000_UP_EN_SENSE4_MASK (0x01 << 4) +#define SLG51000_UP_EN_SENSE3_SHIFT 3 +#define SLG51000_UP_EN_SENSE3_MASK (0x01 << 3) +#define SLG51000_UP_EN_SENSE2_SHIFT 2 +#define SLG51000_UP_EN_SENSE2_MASK (0x01 << 2) +#define SLG51000_UP_EN_SENSE1_SHIFT 1 +#define SLG51000_UP_EN_SENSE1_MASK (0x01 << 1) +#define SLG51000_UP_EN_SENSE0_SHIFT 0 +#define SLG51000_UP_EN_SENSE0_MASK (0x01 << 0) + +/* SLG51000_PWRSEQ_INPUT_SENSE_CONF_B = 0x1916 */ +#define SLG51000_CRASH_DETECT_SENSE_SHIFT 7 +#define SLG51000_CRASH_DETECT_SENSE_MASK (0x01 << 7) +#define SLG51000_TRIG_DOWN_SENSE_SHIFT 6 +#define SLG51000_TRIG_DOWN_SENSE_MASK (0x01 << 6) +#define SLG51000_DOWN_EN_SENSE5_SHIFT 5 +#define SLG51000_DOWN_EN_SENSE5_MASK (0x01 << 5) +#define SLG51000_DOWN_EN_SENSE4_SHIFT 4 +#define SLG51000_DOWN_EN_SENSE4_MASK (0x01 << 4) +#define SLG51000_DOWN_EN_SENSE3_SHIFT 3 +#define SLG51000_DOWN_EN_SENSE3_MASK (0x01 << 3) +#define SLG51000_DOWN_EN_SENSE2_SHIFT 2 +#define SLG51000_DOWN_EN_SENSE2_MASK (0x01 << 2) +#define SLG51000_DOWN_EN_SENSE1_SHIFT 1 +#define SLG51000_DOWN_EN_SENSE1_MASK (0x01 << 1) +#define SLG51000_DOWN_EN_SENSE0_SHIFT 0 +#define SLG51000_DOWN_EN_SENSE0_MASK (0x01 << 0) + +/* SLG51000_LDO1_VSEL ~ SLG51000_LDO7_VSEL = + * 0x2000, 0x2200, 0x2300, 0x2500, 0x2700, 0x2900, 0x3100 + */ +#define SLG51000_VSEL_SHIFT 0 +#define SLG51000_VSEL_MASK (0xff << 0) + +/* SLG51000_LDO1_MINV ~ SLG51000_LDO7_MINV = + * 0x2060, 0x2260, 0x2360, 0x2560, 0x2760, 0x2960, 0x3160 + */ +#define SLG51000_MINV_SHIFT 0 +#define SLG51000_MINV_MASK (0xff << 0) + +/* SLG51000_LDO1_MAXV ~ SLG51000_LDO7_MAXV = + * 0x2061, 0x2261, 0x2361, 0x2561, 0x2761, 0x2961, 0x3161 + */ +#define SLG51000_MAXV_SHIFT 0 +#define SLG51000_MAXV_MASK (0xff << 0) + +/* SLG51000_LDO1_MISC1 = 0x2064, SLG51000_LDO2_MISC1 = 0x2264 */ +#define SLG51000_SEL_VRANGE_SHIFT 0 +#define SLG51000_SEL_VRANGE_MASK (0x01 << 0) + +/* SLG51000_LDO1_VSEL_ACTUAL ~ SLG51000_LDO7_VSEL_ACTUAL = + * 0x2065, 0x2265, 0x2366, 0x2566, 0x2767, 0x2967, 0x3166 + */ +#define SLG51000_VSEL_ACTUAL_SHIFT 0 +#define SLG51000_VSEL_ACTUAL_MASK (0xff << 0) + +/* SLG51000_LDO1_EVENT ~ SLG51000_LDO7_EVENT = + * 0x20c0, 0x22c0, 0x23c0, 0x25c0, 0x27c0, 0x29c0, 0x31c0 + */ +#define SLG51000_EVT_ILIM_FLAG_SHIFT 0 +#define SLG51000_EVT_ILIM_FLAG_MASK (0x01 << 0) +#define SLG51000_EVT_VOUT_OK_FLAG_SHIFT 1 +#define SLG51000_EVT_VOUT_OK_FLAG_MASK (0x01 << 1) + +/* SLG51000_LDO1_STATUS ~ SLG51000_LDO7_STATUS = + * 0x20c1, 0x22c1, 0x23c1, 0x25c1, 0x27c1, 0x29c1, 0x31c1 + */ +#define SLG51000_STA_ILIM_FLAG_SHIFT 0 +#define SLG51000_STA_ILIM_FLAG_MASK (0x01 << 0) +#define SLG51000_STA_VOUT_OK_FLAG_SHIFT 1 +#define SLG51000_STA_VOUT_OK_FLAG_MASK (0x01 << 1) + +/* SLG51000_LDO1_IRQ_MASK ~ SLG51000_LDO7_IRQ_MASK = + * 0x20c2, 0x22c2, 0x23c2, 0x25c2, 0x27c2, 0x29c2, 0x31c2 + */ +#define SLG51000_IRQ_ILIM_FLAG_SHIFT 0 +#define SLG51000_IRQ_ILIM_FLAG_MASK (0x01 << 0) + +/* SLG51000_LDO3_CONF1 ~ SLG51000_LDO7_CONF1 = + * 0x2364, 0x2564, 0x2765, 0x2965, 0x3164 + */ +#define SLG51000_SEL_START_ILIM_SHIFT 0 +#define SLG51000_SEL_START_ILIM_MASK (0x7f << 0) + +/* SLG51000_LDO3_CONF2 ~ SLG51000_LDO7_CONF2 = + * 0x2365, 0x2565, 0x2766, 0x2966, 0x3165 + */ +#define SLG51000_SEL_FUNC_ILIM_SHIFT 0 +#define SLG51000_SEL_FUNC_ILIM_MASK (0x7f << 0) + +/* SLG51000_LDO5_TRIM2 = 0x2763, SLG51000_LDO6_TRIM2 = 0x2963 */ +#define SLG51000_SEL_BYP_SLEW_RATE_SHIFT 2 +#define SLG51000_SEL_BYP_SLEW_RATE_MASK (0x03 << 2) +#define SLG51000_SEL_BYP_VGATE_SHIFT 1 +#define SLG51000_SEL_BYP_VGATE_MASK (0x01 << 1) +#define SLG51000_SEL_BYP_MODE_SHIFT 0 +#define SLG51000_SEL_BYP_MODE_MASK (0x01 << 0) + +/* SLG51000_OTP_EVENT = 0x782b */ +#define SLG51000_EVT_CRC_SHIFT 0 +#define SLG51000_EVT_CRC_MASK (0x01 << 0) + +/* SLG51000_OTP_IRQ_MASK = 0x782d */ +#define SLG51000_IRQ_CRC_SHIFT 0 +#define SLG51000_IRQ_CRC_MASK (0x01 << 0) + +/* SLG51000_OTP_LOCK_OTP_PROG = 0x78fe */ +#define SLG51000_LOCK_OTP_PROG_SHIFT 0 +#define SLG51000_LOCK_OTP_PROG_MASK (0x01 << 0) + +/* SLG51000_OTP_LOCK_CTRL = 0x78ff */ +#define SLG51000_LOCK_DFT_SHIFT 1 +#define SLG51000_LOCK_DFT_MASK (0x01 << 1) +#define SLG51000_LOCK_RWT_SHIFT 0 +#define SLG51000_LOCK_RWT_MASK (0x01 << 0) + +/* SLG51000_LOCK_GLOBAL_LOCK_CTRL1 = 0x8000 */ +#define SLG51000_LDO7_LOCK_SHIFT 7 +#define SLG51000_LDO7_LOCK_MASK (0x01 << 7) +#define SLG51000_LDO6_LOCK_SHIFT 6 +#define SLG51000_LDO6_LOCK_MASK (0x01 << 6) +#define SLG51000_LDO5_LOCK_SHIFT 5 +#define SLG51000_LDO5_LOCK_MASK (0x01 << 5) +#define SLG51000_LDO4_LOCK_SHIFT 4 +#define SLG51000_LDO4_LOCK_MASK (0x01 << 4) +#define SLG51000_LDO3_LOCK_SHIFT 3 +#define SLG51000_LDO3_LOCK_MASK (0x01 << 3) +#define SLG51000_LDO2_LOCK_SHIFT 2 +#define SLG51000_LDO2_LOCK_MASK (0x01 << 2) +#define SLG51000_LDO1_LOCK_SHIFT 1 +#define SLG51000_LDO1_LOCK_MASK (0x01 << 1) + +#endif /* __SLG51000_REGISTERS_H__ */ + diff --git a/drivers/regulator/stm32-booster.c b/drivers/regulator/stm32-booster.c new file mode 100644 index 000000000000..2a897666c650 --- /dev/null +++ b/drivers/regulator/stm32-booster.c @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2019 +// Author(s): Fabrice Gasnier <fabrice.gasnier@st.com>. + +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +/* STM32H7 SYSCFG register */ +#define STM32H7_SYSCFG_PMCR 0x04 +#define STM32H7_SYSCFG_BOOSTE_MASK BIT(8) + +/* STM32MP1 SYSCFG has set and clear registers */ +#define STM32MP1_SYSCFG_PMCSETR 0x04 +#define STM32MP1_SYSCFG_PMCCLRR 0x44 +#define STM32MP1_SYSCFG_EN_BOOSTER_MASK BIT(8) + +static const struct regulator_ops stm32h7_booster_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_desc stm32h7_booster_desc = { + .name = "booster", + .supply_name = "vdda", + .n_voltages = 1, + .type = REGULATOR_VOLTAGE, + .min_uV = 3300000, + .fixed_uV = 3300000, + .ramp_delay = 66000, /* up to 50us to stabilize */ + .ops = &stm32h7_booster_ops, + .enable_reg = STM32H7_SYSCFG_PMCR, + .enable_mask = STM32H7_SYSCFG_BOOSTE_MASK, + .owner = THIS_MODULE, +}; + +static int stm32mp1_booster_enable(struct regulator_dev *rdev) +{ + return regmap_write(rdev->regmap, STM32MP1_SYSCFG_PMCSETR, + STM32MP1_SYSCFG_EN_BOOSTER_MASK); +} + +static int stm32mp1_booster_disable(struct regulator_dev *rdev) +{ + return regmap_write(rdev->regmap, STM32MP1_SYSCFG_PMCCLRR, + STM32MP1_SYSCFG_EN_BOOSTER_MASK); +} + +static const struct regulator_ops stm32mp1_booster_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = stm32mp1_booster_enable, + .disable = stm32mp1_booster_disable, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_desc stm32mp1_booster_desc = { + .name = "booster", + .supply_name = "vdda", + .n_voltages = 1, + .type = REGULATOR_VOLTAGE, + .min_uV = 3300000, + .fixed_uV = 3300000, + .ramp_delay = 66000, + .ops = &stm32mp1_booster_ops, + .enable_reg = STM32MP1_SYSCFG_PMCSETR, + .enable_mask = STM32MP1_SYSCFG_EN_BOOSTER_MASK, + .owner = THIS_MODULE, +}; + +static int stm32_booster_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = pdev->dev.of_node; + struct regulator_config config = { }; + const struct regulator_desc *desc; + struct regulator_dev *rdev; + struct regmap *regmap; + int ret; + + regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + desc = (const struct regulator_desc *) + of_match_device(dev->driver->of_match_table, dev)->data; + + config.regmap = regmap; + config.dev = dev; + config.of_node = np; + config.init_data = of_get_regulator_init_data(dev, np, desc); + + rdev = devm_regulator_register(dev, desc, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(dev, "register failed with error %d\n", ret); + return ret; + } + + return 0; +} + +static const struct of_device_id stm32_booster_of_match[] = { + { + .compatible = "st,stm32h7-booster", + .data = (void *)&stm32h7_booster_desc + }, { + .compatible = "st,stm32mp1-booster", + .data = (void *)&stm32mp1_booster_desc + }, { + }, +}; +MODULE_DEVICE_TABLE(of, stm32_booster_of_match); + +static struct platform_driver stm32_booster_driver = { + .probe = stm32_booster_probe, + .driver = { + .name = "stm32-booster", + .of_match_table = of_match_ptr(stm32_booster_of_match), + }, +}; +module_platform_driver(stm32_booster_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics STM32 booster regulator driver"); +MODULE_ALIAS("platform:stm32-booster"); diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c index ca39b3d55123..10ea4b5a0f55 100644 --- a/drivers/regulator/tps65090-regulator.c +++ b/drivers/regulator/tps65090-regulator.c @@ -371,11 +371,12 @@ static struct tps65090_platform_data *tps65090_parse_dt_reg_data( "dcdc-ext-control-gpios", 0, gflags, "tps65090"); - if (IS_ERR(rpdata->gpiod)) - return ERR_CAST(rpdata->gpiod); - if (!rpdata->gpiod) + if (PTR_ERR(rpdata->gpiod) == -ENOENT) { dev_err(&pdev->dev, "could not find DCDC external control GPIO\n"); + rpdata->gpiod = NULL; + } else if (IS_ERR(rpdata->gpiod)) + return ERR_CAST(rpdata->gpiod); } if (of_property_read_u32(tps65090_matches[idx].of_node, diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index b422eef97b77..018dbbd96771 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -15,7 +15,7 @@ #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/slab.h> #include <linux/mfd/wm831x/core.h> @@ -50,7 +50,7 @@ struct wm831x_dcdc { int base; struct wm831x *wm831x; struct regulator_dev *regulator; - int dvs_gpio; + struct gpio_desc *dvs_gpiod; int dvs_gpio_state; int on_vsel; int dvs_vsel; @@ -217,7 +217,7 @@ static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state) return 0; dcdc->dvs_gpio_state = state; - gpio_set_value(dcdc->dvs_gpio, state); + gpiod_set_value(dcdc->dvs_gpiod, state); /* Should wait for DVS state change to be asserted if we have * a GPIO for it, for now assume the device is configured @@ -237,10 +237,10 @@ static int wm831x_buckv_set_voltage_sel(struct regulator_dev *rdev, int ret; /* If this value is already set then do a GPIO update if we can */ - if (dcdc->dvs_gpio && dcdc->on_vsel == vsel) + if (dcdc->dvs_gpiod && dcdc->on_vsel == vsel) return wm831x_buckv_set_dvs(rdev, 0); - if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel) + if (dcdc->dvs_gpiod && dcdc->dvs_vsel == vsel) return wm831x_buckv_set_dvs(rdev, 1); /* Always set the ON status to the minimum voltage */ @@ -249,7 +249,7 @@ static int wm831x_buckv_set_voltage_sel(struct regulator_dev *rdev, return ret; dcdc->on_vsel = vsel; - if (!dcdc->dvs_gpio) + if (!dcdc->dvs_gpiod) return ret; /* Kick the voltage transition now */ @@ -296,7 +296,7 @@ static int wm831x_buckv_get_voltage_sel(struct regulator_dev *rdev) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - if (dcdc->dvs_gpio && dcdc->dvs_gpio_state) + if (dcdc->dvs_gpiod && dcdc->dvs_gpio_state) return dcdc->dvs_vsel; else return dcdc->on_vsel; @@ -337,7 +337,7 @@ static void wm831x_buckv_dvs_init(struct platform_device *pdev, int ret; u16 ctrl; - if (!pdata || !pdata->dvs_gpio) + if (!pdata) return; /* gpiolib won't let us read the GPIO status so pick the higher @@ -345,17 +345,14 @@ static void wm831x_buckv_dvs_init(struct platform_device *pdev, */ dcdc->dvs_gpio_state = pdata->dvs_init_state; - ret = devm_gpio_request_one(&pdev->dev, pdata->dvs_gpio, - dcdc->dvs_gpio_state ? GPIOF_INIT_HIGH : 0, - "DCDC DVS"); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n", - dcdc->name, ret); + dcdc->dvs_gpiod = devm_gpiod_get(&pdev->dev, "dvs", + dcdc->dvs_gpio_state ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW); + if (IS_ERR(dcdc->dvs_gpiod)) { + dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %ld\n", + dcdc->name, PTR_ERR(dcdc->dvs_gpiod)); return; } - dcdc->dvs_gpio = pdata->dvs_gpio; - switch (pdata->dvs_control_src) { case 1: ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT; |