diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-02-04 07:03:40 +0000 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-02-04 07:03:40 +0000 |
commit | eadc4e40e68832fc61ae5e3ef2ef5cfcd9308b2c (patch) | |
tree | d6a3a2ec75d322fcbd1dc3cd2c828abab8213ca8 /drivers/rtc | |
parent | 322bf2d3446aabdaf5e8887775bd9ced80dbc0f0 (diff) | |
parent | f45719240700398b63a165f6b7f3fbab04f0b052 (diff) | |
download | linux-eadc4e40e68832fc61ae5e3ef2ef5cfcd9308b2c.tar.gz linux-eadc4e40e68832fc61ae5e3ef2ef5cfcd9308b2c.tar.bz2 linux-eadc4e40e68832fc61ae5e3ef2ef5cfcd9308b2c.zip |
Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The VL_READ and VL_CLR ioctls have been reworked to be more useful.
This will not break userspace as there are very few users and they are
using the integer value as a boolean.
Apart from that, two drivers were reworked and a few fixes here and
there for a net reduction of number of lines.
Summary:
Subsystem:
- the VL_READ and VL_CLR ioctls are now documented and their behavior
is unified across all the drivers.
- RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
REGMAP_I2C and REGMAP_SPI unecessarily.
Drivers:
- at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
sama5d2 compatibles.
- cmos: solve lost interrupts issue on MS Surface 3
- hym8563: return proper errno when time is invalid
- rv3029: many fixes, nvram support"
* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
dt-bindings: rtc: at91rm9200: document clocks property
rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
rtc: Kconfig: select REGMAP_I2C when necessary
rtc: Kconfig: properly indent sd3078 entry
rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
rtc: cmos: Use predefined value for RTC IRQ on legacy x86
rtc: cmos: Stop using shared IRQ
rtc: tps6586x: Use IRQ_NOAUTOEN flag
rtc: at91rm9200: use FIELD_PREP/FIELD_GET
rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
rtc: at91rm9200: move register definitions to C file
rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
dt-bindings: rtc: at91rm9200: convert bindings to json-schema
rtc: at91rm9200: remove procfs information
dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
rtc: pcf8563: Use BIT
rtc: moxart: Convert to SPDX identifier
rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
rtc: rx8025: Remove struct i2c_client from struct rx8025_data
rtc: hym8563: Read the valid flag directly instead of caching it
...
Diffstat (limited to 'drivers/rtc')
-rw-r--r-- | drivers/rtc/Kconfig | 24 | ||||
-rw-r--r-- | drivers/rtc/rtc-abx80x.c | 7 | ||||
-rw-r--r-- | drivers/rtc/rtc-asm9260.c | 3 | ||||
-rw-r--r-- | drivers/rtc/rtc-at91rm9200.c | 119 | ||||
-rw-r--r-- | drivers/rtc/rtc-at91rm9200.h | 71 | ||||
-rw-r--r-- | drivers/rtc/rtc-cmos.c | 12 | ||||
-rw-r--r-- | drivers/rtc/rtc-ds1343.c | 10 | ||||
-rw-r--r-- | drivers/rtc/rtc-hym8563.c | 19 | ||||
-rw-r--r-- | drivers/rtc/rtc-moxart.c | 5 | ||||
-rw-r--r-- | drivers/rtc/rtc-mt6397.c | 10 | ||||
-rw-r--r-- | drivers/rtc/rtc-omap.c | 2 | ||||
-rw-r--r-- | drivers/rtc/rtc-pcf2127.c | 6 | ||||
-rw-r--r-- | drivers/rtc/rtc-pcf85063.c | 16 | ||||
-rw-r--r-- | drivers/rtc/rtc-pcf8523.c | 6 | ||||
-rw-r--r-- | drivers/rtc/rtc-pcf8563.c | 40 | ||||
-rw-r--r-- | drivers/rtc/rtc-rv3028.c | 17 | ||||
-rw-r--r-- | drivers/rtc/rtc-rv3029c2.c | 442 | ||||
-rw-r--r-- | drivers/rtc/rtc-rv8803.c | 16 | ||||
-rw-r--r-- | drivers/rtc/rtc-rx8010.c | 25 | ||||
-rw-r--r-- | drivers/rtc/rtc-rx8025.c | 27 | ||||
-rw-r--r-- | drivers/rtc/rtc-stm32.c | 5 | ||||
-rw-r--r-- | drivers/rtc/rtc-tps6586x.c | 4 | ||||
-rw-r--r-- | drivers/rtc/rtc-zynqmp.c | 4 |
23 files changed, 350 insertions, 540 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index df7a3843069d..34c8b6c7e095 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -240,6 +240,7 @@ config RTC_DRV_AS3722 config RTC_DRV_DS1307 tristate "Dallas/Maxim DS1307/37/38/39/40/41, ST M41T00, EPSON RX-8025, ISL12057" + select REGMAP_I2C help If you say yes here you get support for various compatible RTC chips (often with battery backup) connected with I2C. This driver @@ -622,6 +623,7 @@ config RTC_DRV_RX8010 config RTC_DRV_RX8581 tristate "Epson RX-8571/RX-8581" + select REGMAP_I2C help If you say yes here you will get support for the Epson RX-8571/ RX-8581. @@ -649,6 +651,7 @@ config RTC_DRV_EM3027 config RTC_DRV_RV3028 tristate "Micro Crystal RV3028" + select REGMAP_I2C help If you say yes here you get support for the Micro Crystal RV3028. @@ -677,13 +680,14 @@ config RTC_DRV_S5M will be called rtc-s5m. config RTC_DRV_SD3078 - tristate "ZXW Shenzhen whwave SD3078" - help - If you say yes here you get support for the ZXW Shenzhen whwave - SD3078 RTC chips. + tristate "ZXW Shenzhen whwave SD3078" + select REGMAP_I2C + help + If you say yes here you get support for the ZXW Shenzhen whwave + SD3078 RTC chips. - This driver can also be built as a module. If so, the module - will be called rtc-sd3078 + This driver can also be built as a module. If so, the module + will be called rtc-sd3078 endif # I2C @@ -849,14 +853,14 @@ config RTC_I2C_AND_SPI default m if I2C=m default y if I2C=y default y if SPI_MASTER=y - select REGMAP_I2C if I2C - select REGMAP_SPI if SPI_MASTER comment "SPI and I2C RTC drivers" config RTC_DRV_DS3232 tristate "Dallas/Maxim DS3232/DS3234" depends on RTC_I2C_AND_SPI + select REGMAP_I2C if I2C + select REGMAP_SPI if SPI_MASTER help If you say yes here you get support for Dallas Semiconductor DS3232 and DS3234 real-time clock chips. If an interrupt is associated @@ -876,6 +880,8 @@ config RTC_DRV_DS3232_HWMON config RTC_DRV_PCF2127 tristate "NXP PCF2127" depends on RTC_I2C_AND_SPI + select REGMAP_I2C if I2C + select REGMAP_SPI if SPI_MASTER select WATCHDOG_CORE if WATCHDOG help If you say yes here you get support for the NXP PCF2127/29 RTC @@ -892,6 +898,8 @@ config RTC_DRV_PCF2127 config RTC_DRV_RV3029C2 tristate "Micro Crystal RV3029/3049" depends on RTC_I2C_AND_SPI + select REGMAP_I2C if I2C + select REGMAP_SPI if SPI_MASTER help If you say yes here you get support for the Micro Crystal RV3029 and RV3049 RTC chips. diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c index 73830670a41f..3521d8e8dc38 100644 --- a/drivers/rtc/rtc-abx80x.c +++ b/drivers/rtc/rtc-abx80x.c @@ -523,12 +523,9 @@ static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) if (status < 0) return status; - tmp = !!(status & ABX8XX_STATUS_BLF); + tmp = status & ABX8XX_STATUS_BLF ? RTC_VL_BACKUP_LOW : 0; - if (copy_to_user((void __user *)arg, &tmp, sizeof(int))) - return -EFAULT; - - return 0; + return put_user(tmp, (unsigned int __user *)arg); case RTC_VL_CLR: status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS); diff --git a/drivers/rtc/rtc-asm9260.c b/drivers/rtc/rtc-asm9260.c index 10064bdabdff..3ab81cdec00b 100644 --- a/drivers/rtc/rtc-asm9260.c +++ b/drivers/rtc/rtc-asm9260.c @@ -264,6 +264,9 @@ static int asm9260_rtc_probe(struct platform_device *pdev) return PTR_ERR(priv->iobase); priv->clk = devm_clk_get(dev, "ahb"); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + ret = clk_prepare_enable(priv->clk); if (ret) { dev_err(dev, "Failed to enable clk!\n"); diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 3b833e02a657..5e811e04cb21 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -14,6 +14,7 @@ */ #include <linux/bcd.h> +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/completion.h> #include <linux/interrupt.h> @@ -30,7 +31,51 @@ #include <linux/time.h> #include <linux/uaccess.h> -#include "rtc-at91rm9200.h" +#define AT91_RTC_CR 0x00 /* Control Register */ +#define AT91_RTC_UPDTIM BIT(0) /* Update Request Time Register */ +#define AT91_RTC_UPDCAL BIT(1) /* Update Request Calendar Register */ + +#define AT91_RTC_MR 0x04 /* Mode Register */ + +#define AT91_RTC_TIMR 0x08 /* Time Register */ +#define AT91_RTC_SEC GENMASK(6, 0) /* Current Second */ +#define AT91_RTC_MIN GENMASK(14, 8) /* Current Minute */ +#define AT91_RTC_HOUR GENMASK(21, 16) /* Current Hour */ +#define AT91_RTC_AMPM BIT(22) /* Ante Meridiem Post Meridiem Indicator */ + +#define AT91_RTC_CALR 0x0c /* Calendar Register */ +#define AT91_RTC_CENT GENMASK(6, 0) /* Current Century */ +#define AT91_RTC_YEAR GENMASK(15, 8) /* Current Year */ +#define AT91_RTC_MONTH GENMASK(20, 16) /* Current Month */ +#define AT91_RTC_DAY GENMASK(23, 21) /* Current Day */ +#define AT91_RTC_DATE GENMASK(29, 24) /* Current Date */ + +#define AT91_RTC_TIMALR 0x10 /* Time Alarm Register */ +#define AT91_RTC_SECEN BIT(7) /* Second Alarm Enable */ +#define AT91_RTC_MINEN BIT(15) /* Minute Alarm Enable */ +#define AT91_RTC_HOUREN BIT(23) /* Hour Alarm Enable */ + +#define AT91_RTC_CALALR 0x14 /* Calendar Alarm Register */ +#define AT91_RTC_MTHEN BIT(23) /* Month Alarm Enable */ +#define AT91_RTC_DATEEN BIT(31) /* Date Alarm Enable */ + +#define AT91_RTC_SR 0x18 /* Status Register */ +#define AT91_RTC_ACKUPD BIT(0) /* Acknowledge for Update */ +#define AT91_RTC_ALARM BIT(1) /* Alarm Flag */ +#define AT91_RTC_SECEV BIT(2) /* Second Event */ +#define AT91_RTC_TIMEV BIT(3) /* Time Event */ +#define AT91_RTC_CALEV BIT(4) /* Calendar Event */ + +#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */ +#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */ +#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ +#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ + +#define AT91_RTC_VER 0x2c /* Valid Entry Register */ +#define AT91_RTC_NVTIM BIT(0) /* Non valid Time */ +#define AT91_RTC_NVCAL BIT(1) /* Non valid Calendar */ +#define AT91_RTC_NVTIMALR BIT(2) /* Non valid Time Alarm */ +#define AT91_RTC_NVCALALR BIT(3) /* Non valid Calendar Alarm */ #define at91_rtc_read(field) \ readl_relaxed(at91_rtc_regs + field) @@ -117,20 +162,20 @@ static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg, } while ((time != at91_rtc_read(timereg)) || (date != at91_rtc_read(calreg))); - tm->tm_sec = bcd2bin((time & AT91_RTC_SEC) >> 0); - tm->tm_min = bcd2bin((time & AT91_RTC_MIN) >> 8); - tm->tm_hour = bcd2bin((time & AT91_RTC_HOUR) >> 16); + tm->tm_sec = bcd2bin(FIELD_GET(AT91_RTC_SEC, time)); + tm->tm_min = bcd2bin(FIELD_GET(AT91_RTC_MIN, time)); + tm->tm_hour = bcd2bin(FIELD_GET(AT91_RTC_HOUR, time)); /* * The Calendar Alarm register does not have a field for * the year - so these will return an invalid value. */ tm->tm_year = bcd2bin(date & AT91_RTC_CENT) * 100; /* century */ - tm->tm_year += bcd2bin((date & AT91_RTC_YEAR) >> 8); /* year */ + tm->tm_year += bcd2bin(FIELD_GET(AT91_RTC_YEAR, date)); /* year */ - tm->tm_wday = bcd2bin((date & AT91_RTC_DAY) >> 21) - 1; /* day of the week [0-6], Sunday=0 */ - tm->tm_mon = bcd2bin((date & AT91_RTC_MONTH) >> 16) - 1; - tm->tm_mday = bcd2bin((date & AT91_RTC_DATE) >> 24); + tm->tm_wday = bcd2bin(FIELD_GET(AT91_RTC_DAY, date)) - 1; /* day of the week [0-6], Sunday=0 */ + tm->tm_mon = bcd2bin(FIELD_GET(AT91_RTC_MONTH, date)) - 1; + tm->tm_mday = bcd2bin(FIELD_GET(AT91_RTC_DATE, date)); } /* @@ -167,16 +212,17 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) at91_rtc_write_idr(AT91_RTC_ACKUPD); at91_rtc_write(AT91_RTC_TIMR, - bin2bcd(tm->tm_sec) << 0 - | bin2bcd(tm->tm_min) << 8 - | bin2bcd(tm->tm_hour) << 16); + FIELD_PREP(AT91_RTC_SEC, bin2bcd(tm->tm_sec)) + | FIELD_PREP(AT91_RTC_MIN, bin2bcd(tm->tm_min)) + | FIELD_PREP(AT91_RTC_HOUR, bin2bcd(tm->tm_hour))); at91_rtc_write(AT91_RTC_CALR, - bin2bcd((tm->tm_year + 1900) / 100) /* century */ - | bin2bcd(tm->tm_year % 100) << 8 /* year */ - | bin2bcd(tm->tm_mon + 1) << 16 /* tm_mon starts at zero */ - | bin2bcd(tm->tm_wday + 1) << 21 /* day of the week [0-6], Sunday=0 */ - | bin2bcd(tm->tm_mday) << 24); + FIELD_PREP(AT91_RTC_CENT, + bin2bcd((tm->tm_year + 1900) / 100)) + | FIELD_PREP(AT91_RTC_YEAR, bin2bcd(tm->tm_year % 100)) + | FIELD_PREP(AT91_RTC_MONTH, bin2bcd(tm->tm_mon + 1)) + | FIELD_PREP(AT91_RTC_DAY, bin2bcd(tm->tm_wday + 1)) + | FIELD_PREP(AT91_RTC_DATE, bin2bcd(tm->tm_mday))); /* Restart Time/Calendar */ cr = at91_rtc_read(AT91_RTC_CR); @@ -211,25 +257,17 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) */ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) { - struct rtc_time tm; - - at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, &tm); - - tm.tm_mon = alrm->time.tm_mon; - tm.tm_mday = alrm->time.tm_mday; - tm.tm_hour = alrm->time.tm_hour; - tm.tm_min = alrm->time.tm_min; - tm.tm_sec = alrm->time.tm_sec; + struct rtc_time tm = alrm->time; at91_rtc_write_idr(AT91_RTC_ALARM); at91_rtc_write(AT91_RTC_TIMALR, - bin2bcd(tm.tm_sec) << 0 - | bin2bcd(tm.tm_min) << 8 - | bin2bcd(tm.tm_hour) << 16 + FIELD_PREP(AT91_RTC_SEC, bin2bcd(alrm->time.tm_sec)) + | FIELD_PREP(AT91_RTC_MIN, bin2bcd(alrm->time.tm_min)) + | FIELD_PREP(AT91_RTC_HOUR, bin2bcd(alrm->time.tm_hour)) | AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN); at91_rtc_write(AT91_RTC_CALALR, - bin2bcd(tm.tm_mon + 1) << 16 /* tm_mon starts at zero */ - | bin2bcd(tm.tm_mday) << 24 + FIELD_PREP(AT91_RTC_MONTH, bin2bcd(alrm->time.tm_mon + 1)) + | FIELD_PREP(AT91_RTC_DATE, bin2bcd(alrm->time.tm_mday)) | AT91_RTC_DATEEN | AT91_RTC_MTHEN); if (alrm->enabled) { @@ -254,20 +292,6 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) return 0; } -/* - * Provide additional RTC information in /proc/driver/rtc - */ -static int at91_rtc_proc(struct device *dev, struct seq_file *seq) -{ - unsigned long imr = at91_rtc_read_imr(); - - seq_printf(seq, "update_IRQ\t: %s\n", - (imr & AT91_RTC_ACKUPD) ? "yes" : "no"); - seq_printf(seq, "periodic_IRQ\t: %s\n", - (imr & AT91_RTC_SECEV) ? "yes" : "no"); - - return 0; -} /* * IRQ handler for the RTC @@ -327,6 +351,12 @@ static const struct of_device_id at91_rtc_dt_ids[] = { .compatible = "atmel,at91sam9x5-rtc", .data = &at91sam9x5_config, }, { + .compatible = "atmel,sama5d4-rtc", + .data = &at91rm9200_config, + }, { + .compatible = "atmel,sama5d2-rtc", + .data = &at91rm9200_config, + }, { /* sentinel */ } }; @@ -337,7 +367,6 @@ static const struct rtc_class_ops at91_rtc_ops = { .set_time = at91_rtc_settime, .read_alarm = at91_rtc_readalarm, .set_alarm = at91_rtc_setalarm, - .proc = at91_rtc_proc, .alarm_irq_enable = at91_rtc_alarm_irq_enable, }; diff --git a/drivers/rtc/rtc-at91rm9200.h b/drivers/rtc/rtc-at91rm9200.h deleted file mode 100644 index 8be5289da8e2..000000000000 --- a/drivers/rtc/rtc-at91rm9200.h +++ /dev/null @@ -1,71 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-at91/include/mach/at91_rtc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Real Time Clock (RTC) - System peripheral registers. - * Based on AT91RM9200 datasheet revision E. - */ - -#ifndef AT91_RTC_H -#define AT91_RTC_H - -#define AT91_RTC_CR 0x00 /* Control Register */ -#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */ -#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ -#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ -#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) -#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) -#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) -#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) -#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ -#define AT91_RTC_CALEVSEL_WEEK (0 << 16) -#define AT91_RTC_CALEVSEL_MONTH (1 << 16) -#define AT91_RTC_CALEVSEL_YEAR (2 << 16) - -#define AT91_RTC_MR 0x04 /* Mode Register */ -#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ - -#define AT91_RTC_TIMR 0x08 /* Time Register */ -#define AT91_RTC_SEC (0x7f << 0) /* Current Second */ -#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ -#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ -#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ - -#define AT91_RTC_CALR 0x0c /* Calendar Register */ -#define AT91_RTC_CENT (0x7f << 0) /* Current Century */ -#define AT91_RTC_YEAR (0xff << 8) /* Current Year */ -#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */ -#define AT91_RTC_DAY (7 << 21) /* Current Day */ -#define AT91_RTC_DATE (0x3f << 24) /* Current Date */ - -#define AT91_RTC_TIMALR 0x10 /* Time Alarm Register */ -#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */ -#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */ -#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */ - -#define AT91_RTC_CALALR 0x14 /* Calendar Alarm Register */ -#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */ -#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */ - -#define AT91_RTC_SR 0x18 /* Status Register */ -#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */ -#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */ -#define AT91_RTC_SECEV (1 << 2) /* Second Event */ -#define AT91_RTC_TIMEV (1 << 3) /* Time Event */ -#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */ - -#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */ -#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */ -#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ -#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ - -#define AT91_RTC_VER 0x2c /* Valid Entry Register */ -#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ -#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */ -#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */ -#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */ - -#endif diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 033303708c8b..b795fe4cbd2e 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -850,7 +850,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) rtc_cmos_int_handler = cmos_interrupt; retval = request_irq(rtc_irq, rtc_cmos_int_handler, - IRQF_SHARED, dev_name(&cmos_rtc.rtc->dev), + 0, dev_name(&cmos_rtc.rtc->dev), cmos_rtc.rtc); if (retval < 0) { dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq); @@ -1197,8 +1197,6 @@ static void rtc_wake_off(struct device *dev) /* Enable use_acpi_alarm mode for Intel platforms no earlier than 2015 */ static void use_acpi_alarm_quirks(void) { - int year; - if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) return; @@ -1208,8 +1206,10 @@ static void use_acpi_alarm_quirks(void) if (!is_hpet_enabled()) return; - if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year >= 2015) - use_acpi_alarm = true; + if (dmi_get_bios_year() < 2015) + return; + + use_acpi_alarm = true; } #else static inline void use_acpi_alarm_quirks(void) { } @@ -1305,7 +1305,7 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) * hardcode it on systems with a legacy PIC. */ if (nr_legacy_irqs()) - irq = 8; + irq = RTC_IRQ; #endif return cmos_do_probe(&pnp->dev, pnp_get_resource(pnp, IORESOURCE_IO, 0), irq); diff --git a/drivers/rtc/rtc-ds1343.c b/drivers/rtc/rtc-ds1343.c index d21004a68ee0..ba143423875b 100644 --- a/drivers/rtc/rtc-ds1343.c +++ b/drivers/rtc/rtc-ds1343.c @@ -75,7 +75,6 @@ static const struct spi_device_id ds1343_id[] = { MODULE_DEVICE_TABLE(spi, ds1343_id); struct ds1343_priv { - struct spi_device *spi; struct rtc_device *rtc; struct regmap *map; int irq; @@ -362,12 +361,13 @@ static int ds1343_probe(struct spi_device *spi) if (!priv) return -ENOMEM; - priv->spi = spi; - /* RTC DS1347 works in spi mode 3 and - * its chip select is active high + * its chip select is active high. Active high should be defined as + * "inverse polarity" as GPIO-based chip selects can be logically + * active high but inverted by the GPIO library. */ - spi->mode = SPI_MODE_3 | SPI_CS_HIGH; + spi->mode |= SPI_MODE_3; + spi->mode ^= SPI_CS_HIGH; spi->bits_per_word = 8; res = spi_setup(spi); if (res) diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c index 443f6d05ce29..0fb79c4afb46 100644 --- a/drivers/rtc/rtc-hym8563.c +++ b/drivers/rtc/rtc-hym8563.c @@ -78,7 +78,6 @@ struct hym8563 { struct i2c_client *client; struct rtc_device *rtc; - bool valid; #ifdef CONFIG_COMMON_CLK struct clk_hw clkout_hw; #endif @@ -91,19 +90,19 @@ struct hym8563 { static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm) { struct i2c_client *client = to_i2c_client(dev); - struct hym8563 *hym8563 = i2c_get_clientdata(client); u8 buf[7]; int ret; - if (!hym8563->valid) { - dev_warn(&client->dev, "no valid clock/calendar values available\n"); - return -EPERM; - } - ret = i2c_smbus_read_i2c_block_data(client, HYM8563_SEC, 7, buf); if (ret < 0) return ret; + if (buf[0] & HYM8563_SEC_VL) { + dev_warn(&client->dev, + "no valid clock/calendar values available\n"); + return -EINVAL; + } + tm->tm_sec = bcd2bin(buf[0] & HYM8563_SEC_MASK); tm->tm_min = bcd2bin(buf[1] & HYM8563_MIN_MASK); tm->tm_hour = bcd2bin(buf[2] & HYM8563_HOUR_MASK); @@ -118,7 +117,6 @@ static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm) static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm) { struct i2c_client *client = to_i2c_client(dev); - struct hym8563 *hym8563 = i2c_get_clientdata(client); u8 buf[7]; int ret; @@ -157,8 +155,6 @@ static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm) if (ret < 0) return ret; - hym8563->valid = true; - return 0; } @@ -556,9 +552,8 @@ static int hym8563_probe(struct i2c_client *client, if (ret < 0) return ret; - hym8563->valid = !(ret & HYM8563_SEC_VL); dev_dbg(&client->dev, "rtc information is %s\n", - hym8563->valid ? "valid" : "invalid"); + (ret & HYM8563_SEC_VL) ? "invalid" : "valid"); hym8563->rtc = devm_rtc_device_register(&client->dev, client->name, &hym8563_rtc_ops, THIS_MODULE); diff --git a/drivers/rtc/rtc-moxart.c b/drivers/rtc/rtc-moxart.c index 07b30a373a92..6b24ac9e1cfa 100644 --- a/drivers/rtc/rtc-moxart.c +++ b/drivers/rtc/rtc-moxart.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * MOXA ART RTC driver. * @@ -7,10 +8,6 @@ * * Based on code from * Moxa Technology Co., Ltd. <www.moxa.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ #include <linux/init.h> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c index 9135e2101752..cda238dfe69b 100644 --- a/drivers/rtc/rtc-mt6397.c +++ b/drivers/rtc/rtc-mt6397.c @@ -297,15 +297,7 @@ static int mtk_rtc_probe(struct platform_device *pdev) rtc->rtc_dev->ops = &mtk_rtc_ops; - ret = rtc_register_device(rtc->rtc_dev); - if (ret) - goto out_free_irq; - - return 0; - -out_free_irq: - free_irq(rtc->irq, rtc); - return ret; + return rtc_register_device(rtc->rtc_dev); } #ifdef CONFIG_PM_SLEEP diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 988a4dfcfaf8..d4ed20fb3194 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -616,7 +616,7 @@ static int rtc_pinconf_get(struct pinctrl_dev *pctldev, break; default: return -ENOTSUPP; - }; + } *config = pinconf_to_config_packed(param, arg); diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c index ba5baaca47be..4e50d6768f13 100644 --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -199,11 +199,9 @@ static int pcf2127_rtc_ioctl(struct device *dev, if (ret) return ret; - touser = touser & PCF2127_BIT_CTRL3_BLF ? 1 : 0; + touser = touser & PCF2127_BIT_CTRL3_BLF ? RTC_VL_BACKUP_LOW : 0; - if (copy_to_user((void __user *)arg, &touser, sizeof(int))) - return -EFAULT; - return 0; + return put_user(touser, (unsigned int __user *)arg); default: return -ENOIOCTLCMD; } diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c index 1afa6d9fa9fb..1db17ba1fc64 100644 --- a/drivers/rtc/rtc-pcf85063.c +++ b/drivers/rtc/rtc-pcf85063.c @@ -289,21 +289,9 @@ static int pcf85063_ioctl(struct device *dev, unsigned int cmd, if (ret < 0) return ret; - if (status & PCF85063_REG_SC_OS) - dev_warn(&pcf85063->rtc->dev, "Voltage low, data loss detected.\n"); + status = status & PCF85063_REG_SC_OS ? RTC_VL_DATA_INVALID : 0; - status &= PCF85063_REG_SC_OS; - - if (copy_to_user((void __user *)arg, &status, sizeof(int))) - return -EFAULT; - - return 0; - - case RTC_VL_CLR: - ret = regmap_update_bits(pcf85063->regmap, PCF85063_REG_SC, - PCF85063_REG_SC_OS, 0); - - return ret; + return put_user(status, (unsigned int __user *)arg); default: return -ENOIOCTLCMD; diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c index b24c908f5f06..47e0f411dd5c 100644 --- a/drivers/rtc/rtc-pcf8523.c +++ b/drivers/rtc/rtc-pcf8523.c @@ -282,11 +282,11 @@ static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd, ret = pcf8523_voltage_low(client); if (ret < 0) return ret; + if (ret) + ret = RTC_VL_BACKUP_LOW; - if (copy_to_user((void __user *)arg, &ret, sizeof(int))) - return -EFAULT; + return put_user(ret, (unsigned int __user *)arg); - return 0; default: return -ENOIOCTLCMD; } diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c index 3c322f3079b0..2dc30eafa639 100644 --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -22,8 +22,8 @@ #define PCF8563_REG_ST1 0x00 /* status */ #define PCF8563_REG_ST2 0x01 -#define PCF8563_BIT_AIE (1 << 1) -#define PCF8563_BIT_AF (1 << 3) +#define PCF8563_BIT_AIE BIT(1) +#define PCF8563_BIT_AF BIT(3) #define PCF8563_BITS_ST2_N (7 << 5) #define PCF8563_REG_SC 0x02 /* datetime */ @@ -76,7 +76,6 @@ struct pcf8563 { * 1970...2069. */ int c_polarity; /* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */ - int voltage_low; /* incicates if a low_voltage was detected */ struct i2c_client *client; #ifdef CONFIG_COMMON_CLK @@ -208,7 +207,6 @@ static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm) return err; if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) { - pcf8563->voltage_low = 1; dev_err(&client->dev, "low voltage detected, date/time is not reliable.\n"); return -EINVAL; @@ -276,43 +274,23 @@ static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm) 9 - PCF8563_REG_SC, buf + PCF8563_REG_SC); } -#ifdef CONFIG_RTC_INTF_DEV static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { - struct pcf8563 *pcf8563 = i2c_get_clientdata(to_i2c_client(dev)); - struct rtc_time tm; + struct i2c_client *client = to_i2c_client(dev); + int ret; switch (cmd) { case RTC_VL_READ: - if (pcf8563->voltage_low) - dev_info(dev, "low voltage detected, date/time is not reliable.\n"); - - if (copy_to_user((void __user *)arg, &pcf8563->voltage_low, - sizeof(int))) - return -EFAULT; - return 0; - case RTC_VL_CLR: - /* - * Clear the VL bit in the seconds register in case - * the time has not been set already (which would - * have cleared it). This does not really matter - * because of the cached voltage_low value but do it - * anyway for consistency. - */ - if (pcf8563_rtc_read_time(dev, &tm)) - pcf8563_rtc_set_time(dev, &tm); - - /* Clear the cached value. */ - pcf8563->voltage_low = 0; + ret = i2c_smbus_read_byte_data(client, PCF8563_REG_SC); + if (ret < 0) + return ret; - return 0; + return put_user(ret & PCF8563_SC_LV ? RTC_VL_DATA_INVALID : 0, + (unsigned int __user *)arg); default: return -ENOIOCTLCMD; } } -#else -#define pcf8563_rtc_ioctl NULL -#endif static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm) { diff --git a/drivers/rtc/rtc-rv3028.c b/drivers/rtc/rtc-rv3028.c index 6b7b3a69601a..a0ddc86c975a 100644 --- a/drivers/rtc/rtc-rv3028.c +++ b/drivers/rtc/rtc-rv3028.c @@ -428,21 +428,8 @@ static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) if (ret < 0) return ret; - if (status & RV3028_STATUS_PORF) - dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n"); - - status &= RV3028_STATUS_PORF; - - if (copy_to_user((void __user *)arg, &status, sizeof(int))) - return -EFAULT; - - return 0; - - case RTC_VL_CLR: - ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, - RV3028_STATUS_PORF, 0); - - return ret; + status = status & RV3028_STATUS_PORF ? RTC_VL_DATA_INVALID : 0; + return put_user(status, (unsigned int __user *)arg); default: return -ENOIOCTLCMD; diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c index 4cdf6588e1d9..62718231731b 100644 --- a/drivers/rtc/rtc-rv3029c2.c +++ b/drivers/rtc/rtc-rv3029c2.c @@ -109,10 +109,8 @@ #define RV3029_CONTROL_E2P_TOV_MASK 0x3F /* XTAL turnover temp mask */ /* user ram section */ -#define RV3029_USR1_RAM_PAGE 0x38 -#define RV3029_USR1_SECTION_LEN 0x04 -#define RV3029_USR2_RAM_PAGE 0x3C -#define RV3029_USR2_SECTION_LEN 0x04 +#define RV3029_RAM_PAGE 0x38 +#define RV3029_RAM_SECTION_LEN 8 struct rv3029_data { struct device *dev; @@ -121,77 +119,13 @@ struct rv3029_data { int irq; }; -static int rv3029_read_regs(struct device *dev, u8 reg, u8 *buf, - unsigned int len) -{ - struct rv3029_data *rv3029 = dev_get_drvdata(dev); - - if ((reg > RV3029_USR1_RAM_PAGE + 7) || - (reg + len > RV3029_USR1_RAM_PAGE + 8)) - return -EINVAL; - - return regmap_bulk_read(rv3029->regmap, reg, buf, len); -} - -static int rv3029_write_regs(struct device *dev, u8 reg, u8 const buf[], - unsigned int len) -{ - struct rv3029_data *rv3029 = dev_get_drvdata(dev); - - if ((reg > RV3029_USR1_RAM_PAGE + 7) || - (reg + len > RV3029_USR1_RAM_PAGE + 8)) - return -EINVAL; - - return regmap_bulk_write(rv3029->regmap, reg, buf, len); -} - -static int rv3029_update_bits(struct device *dev, u8 reg, u8 mask, u8 set) -{ - u8 buf; - int ret; - - ret = rv3029_read_regs(dev, reg, &buf, 1); - if (ret < 0) - return ret; - buf &= ~mask; - buf |= set & mask; - ret = rv3029_write_regs(dev, reg, &buf, 1); - if (ret < 0) - return ret; - - return 0; -} - -static int rv3029_get_sr(struct device *dev, u8 *buf) -{ - int ret = rv3029_read_regs(dev, RV3029_STATUS, buf, 1); - - if (ret < 0) - return -EIO; - dev_dbg(dev, "status = 0x%.2x (%d)\n", buf[0], buf[0]); - return 0; -} - -static int rv3029_set_sr(struct device *dev, u8 val) -{ - u8 buf[1]; - int sr; - - buf[0] = val; - sr = rv3029_write_regs(dev, RV3029_STATUS, buf, 1); - dev_dbg(dev, "status = 0x%.2x (%d)\n", buf[0], buf[0]); - if (sr < 0) - return -EIO; - return 0; -} - -static int rv3029_eeprom_busywait(struct device *dev) +static int rv3029_eeprom_busywait(struct rv3029_data *rv3029) { + unsigned int sr; int i, ret; - u8 sr; for (i = 100; i > 0; i--) { - ret = rv3029_get_sr(dev, &sr); + ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr); if (ret < 0) break; if (!(sr & RV3029_STATUS_EEBUSY)) @@ -199,126 +133,128 @@ static int rv3029_eeprom_busywait(struct device *dev) usleep_range(1000, 10000); } if (i <= 0) { - dev_err(dev, "EEPROM busy wait timeout.\n"); + dev_err(rv3029->dev, "EEPROM busy wait timeout.\n"); return -ETIMEDOUT; } return ret; } -static int rv3029_eeprom_exit(struct device *dev) +static int rv3029_eeprom_exit(struct rv3029_data *rv3029) { /* Re-enable eeprom refresh */ - return rv3029_update_bits(dev, RV3029_ONOFF_CTRL, + return regmap_update_bits(rv3029->regmap, RV3029_ONOFF_CTRL, RV3029_ONOFF_CTRL_EERE, RV3029_ONOFF_CTRL_EERE); } -static int rv3029_eeprom_enter(struct device *dev) +static int rv3029_eeprom_enter(struct rv3029_data *rv3029) { + unsigned int sr; int ret; - u8 sr; /* Check whether we are in the allowed voltage range. */ - ret = rv3029_get_sr(dev, &sr); + ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr); if (ret < 0) return ret; - if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) { + if (sr & RV3029_STATUS_VLOW2) + return -ENODEV; + if (sr & RV3029_STATUS_VLOW1) { /* We clear the bits and retry once just in case * we had a brown out in early startup. */ - sr &= ~RV3029_STATUS_VLOW1; - sr &= ~RV3029_STATUS_VLOW2; - ret = rv3029_set_sr(dev, sr); + ret = regmap_update_bits(rv3029->regmap, RV3029_STATUS, + RV3029_STATUS_VLOW1, 0); if (ret < 0) return ret; usleep_range(1000, 10000); - ret = rv3029_get_sr(dev, &sr); + ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr); if (ret < 0) return ret; - if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) { - dev_err(dev, + if (sr & RV3029_STATUS_VLOW1) { + dev_err(rv3029->dev, "Supply voltage is too low to safely access the EEPROM.\n"); return -ENODEV; } } /* Disable eeprom refresh. */ - ret = rv3029_update_bits(dev, RV3029_ONOFF_CTRL, RV3029_ONOFF_CTRL_EERE, - 0); + ret = regmap_update_bits(rv3029->regmap, RV3029_ONOFF_CTRL, + RV3029_ONOFF_CTRL_EERE, 0); if (ret < 0) return ret; /* Wait for any previous eeprom accesses to finish. */ - ret = rv3029_eeprom_busywait(dev); + ret = rv3029_eeprom_busywait(rv3029); if (ret < 0) - rv3029_eeprom_exit(dev); + rv3029_eeprom_exit(rv3029); return ret; } -static int rv3029_eeprom_read(struct device *dev, u8 reg, +static int rv3029_eeprom_read(struct rv3029_data *rv3029, u8 reg, u8 buf[], size_t len) { int ret, err; - err = rv3029_eeprom_enter(dev); + err = rv3029_eeprom_enter(rv3029); if (err < 0) return err; - ret = rv3029_read_regs(dev, reg, buf, len); + ret = regmap_bulk_read(rv3029->regmap, reg, buf, len); - err = rv3029_eeprom_exit(dev); + err = rv3029_eeprom_exit(rv3029); if (err < 0) return err; return ret; } -static int rv3029_eeprom_write(struct device *dev, u8 reg, +static int rv3029_eeprom_write(struct rv3029_data *rv3029, u8 reg, u8 const buf[], size_t len) { + unsigned int tmp; int ret, err; size_t i; - u8 tmp; - err = rv3029_eeprom_enter(dev); + err = rv3029_eeprom_enter(rv3029); if (err < 0) return err; for (i = 0; i < len; i++, reg++) { - ret = rv3029_read_regs(dev, reg, &tmp, 1); + ret = regmap_read(rv3029->regmap, reg, &tmp); if (ret < 0) break; if (tmp != buf[i]) { - ret = rv3029_write_regs(dev, reg, &buf[i], 1); + tmp = buf[i]; + ret = regmap_write(rv3029->regmap, reg, tmp); if (ret < 0) break; } - ret = rv3029_eeprom_busywait(dev); + ret = rv3029_eeprom_busywait(rv3029); if (ret < 0) break; } - err = rv3029_eeprom_exit(dev); + err = rv3029_eeprom_exit(rv3029); if (err < 0) return err; return ret; } -static int rv3029_eeprom_update_bits(struct device *dev, +static int rv3029_eeprom_update_bits(struct rv3029_data *rv3029, u8 reg, u8 mask, u8 set) { u8 buf; int ret; - ret = rv3029_eeprom_read(dev, reg, &buf, 1); + ret = rv3029_eeprom_read(rv3029, reg, &buf, 1); if (ret < 0) return ret; buf &= ~mask; buf |= set & mask; - ret = rv3029_eeprom_write(dev, reg, &buf, 1); + ret = rv3029_eeprom_write(rv3029, reg, &buf, 1); if (ret < 0) return ret; @@ -330,20 +266,20 @@ static irqreturn_t rv3029_handle_irq(int irq, void *dev_id) struct device *dev = dev_id; struct rv3029_data *rv3029 = dev_get_drvdata(dev); struct mutex *lock = &rv3029->rtc->ops_lock; + unsigned int flags, controls; unsigned long events = 0; - u8 flags, controls; int ret; mutex_lock(lock); - ret = rv3029_read_regs(dev, RV3029_IRQ_CTRL, &controls, 1); + ret = regmap_read(rv3029->regmap, RV3029_IRQ_CTRL, &controls); if (ret) { dev_warn(dev, "Read IRQ Control Register error %d\n", ret); mutex_unlock(lock); return IRQ_NONE; } - ret = rv3029_read_regs(dev, RV3029_IRQ_FLAGS, &flags, 1); + ret = regmap_read(rv3029->regmap, RV3029_IRQ_FLAGS, &flags); if (ret) { dev_warn(dev, "Read IRQ Flags Register error %d\n", ret); mutex_unlock(lock); @@ -358,8 +294,8 @@ static irqreturn_t rv3029_handle_irq(int irq, void *dev_id) if (events) { rtc_update_irq(rv3029->rtc, 1, events); - rv3029_write_regs(dev, RV3029_IRQ_FLAGS, &flags, 1); - rv3029_write_regs(dev, RV3029_IRQ_CTRL, &controls, 1); + regmap_write(rv3029->regmap, RV3029_IRQ_FLAGS, flags); + regmap_write(rv3029->regmap, RV3029_IRQ_CTRL, controls); } mutex_unlock(lock); @@ -368,22 +304,22 @@ static irqreturn_t rv3029_handle_irq(int irq, void *dev_id) static int rv3029_read_time(struct device *dev, struct rtc_time *tm) { - u8 buf[1]; + struct rv3029_data *rv3029 = dev_get_drvdata(dev); + unsigned int sr; int ret; u8 regs[RV3029_WATCH_SECTION_LEN] = { 0, }; - ret = rv3029_get_sr(dev, buf); - if (ret < 0) { - dev_err(dev, "%s: reading SR failed\n", __func__); - return -EIO; - } + ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr); + if (ret < 0) + return ret; + + if (sr & (RV3029_STATUS_VLOW2 | RV3029_STATUS_PON)) + return -EINVAL; - ret = rv3029_read_regs(dev, RV3029_W_SEC, regs, + ret = regmap_bulk_read(rv3029->regmap, RV3029_W_SEC, regs, RV3029_WATCH_SECTION_LEN); - if (ret < 0) { - dev_err(dev, "%s: reading RTC section failed\n", __func__); + if (ret < 0) return ret; - } tm->tm_sec = bcd2bin(regs[RV3029_W_SEC - RV3029_W_SEC]); tm->tm_min = bcd2bin(regs[RV3029_W_MINUTES - RV3029_W_SEC]); @@ -411,34 +347,24 @@ static int rv3029_read_time(struct device *dev, struct rtc_time *tm) static int rv3029_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) { + struct rv3029_data *rv3029 = dev_get_drvdata(dev); struct rtc_time *const tm = &alarm->time; + unsigned int controls, flags; int ret; - u8 regs[8], controls, flags; - - ret = rv3029_get_sr(dev, regs); - if (ret < 0) { - dev_err(dev, "%s: reading SR failed\n", __func__); - return -EIO; - } + u8 regs[8]; - ret = rv3029_read_regs(dev, RV3029_A_SC, regs, + ret = regmap_bulk_read(rv3029->regmap, RV3029_A_SC, regs, RV3029_ALARM_SECTION_LEN); - - if (ret < 0) { - dev_err(dev, "%s: reading alarm section failed\n", __func__); + if (ret < 0) return ret; - } - ret = rv3029_read_regs(dev, RV3029_IRQ_CTRL, &controls, 1); - if (ret) { - dev_err(dev, "Read IRQ Control Register error %d\n", ret); + ret = regmap_read(rv3029->regmap, RV3029_IRQ_CTRL, &controls); + if (ret) return ret; - } - ret = rv3029_read_regs(dev, RV3029_IRQ_FLAGS, &flags, 1); - if (ret < 0) { - dev_err(dev, "Read IRQ Flags Register error %d\n", ret); + + ret = regmap_read(rv3029->regmap, RV3029_IRQ_FLAGS, &flags); + if (ret < 0) return ret; - } tm->tm_sec = bcd2bin(regs[RV3029_A_SC - RV3029_A_SC] & 0x7f); tm->tm_min = bcd2bin(regs[RV3029_A_MN - RV3029_A_SC] & 0x7f); @@ -456,50 +382,20 @@ static int rv3029_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) static int rv3029_alarm_irq_enable(struct device *dev, unsigned int enable) { - int ret; - u8 controls; - - ret = rv3029_read_regs(dev, RV3029_IRQ_CTRL, &controls, 1); - if (ret < 0) { - dev_warn(dev, "Read IRQ Control Register error %d\n", ret); - return ret; - } - - /* enable/disable AIE irq */ - if (enable) - controls |= RV3029_IRQ_CTRL_AIE; - else - controls &= ~RV3029_IRQ_CTRL_AIE; - - ret = rv3029_write_regs(dev, RV3029_IRQ_CTRL, &controls, 1); - if (ret < 0) { - dev_err(dev, "can't update INT reg\n"); - return ret; - } + struct rv3029_data *rv3029 = dev_get_drvdata(dev); - return 0; + return regmap_update_bits(rv3029->regmap, RV3029_IRQ_CTRL, + RV3029_IRQ_CTRL_AIE, + enable ? RV3029_IRQ_CTRL_AIE : 0); } static int rv3029_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) { + struct rv3029_data *rv3029 = dev_get_drvdata(dev); struct rtc_time *const tm = &alarm->time; int ret; u8 regs[8]; - /* - * The clock has an 8 bit wide bcd-coded register (they never learn) - * for the year. tm_year is an offset from 1900 and we are interested - * in the 2000-2099 range, so any value less than 100 is invalid. - */ - if (tm->tm_year < 100) - return -EINVAL; - - ret = rv3029_get_sr(dev, regs); - if (ret < 0) { - dev_err(dev, "%s: reading SR failed\n", __func__); - return -EIO; - } - /* Activate all the alarms with AE_x bit */ regs[RV3029_A_SC - RV3029_A_SC] = bin2bcd(tm->tm_sec) | RV3029_A_AE_X; regs[RV3029_A_MN - RV3029_A_SC] = bin2bcd(tm->tm_min) | RV3029_A_AE_X; @@ -515,39 +411,20 @@ static int rv3029_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) | RV3029_A_AE_X; /* Write the alarm */ - ret = rv3029_write_regs(dev, RV3029_A_SC, regs, + ret = regmap_bulk_write(rv3029->regmap, RV3029_A_SC, regs, RV3029_ALARM_SECTION_LEN); if (ret < 0) return ret; - if (alarm->enabled) { - /* enable AIE irq */ - ret = rv3029_alarm_irq_enable(dev, 1); - if (ret) - return ret; - } else { - /* disable AIE irq */ - ret = rv3029_alarm_irq_enable(dev, 0); - if (ret) - return ret; - } - - return 0; + return rv3029_alarm_irq_enable(dev, alarm->enabled); } static int rv3029_set_time(struct device *dev, struct rtc_time *tm) { + struct rv3029_data *rv3029 = dev_get_drvdata(dev); u8 regs[8]; int ret; - /* - * The clock has an 8 bit wide bcd-coded register (they never learn) - * for the year. tm_year is an offset from 1900 and we are interested - * in the 2000-2099 range, so any value less than 100 is invalid. - */ - if (tm->tm_year < 100) - return -EINVAL; - regs[RV3029_W_SEC - RV3029_W_SEC] = bin2bcd(tm->tm_sec); regs[RV3029_W_MINUTES - RV3029_W_SEC] = bin2bcd(tm->tm_min); regs[RV3029_W_HOURS - RV3029_W_SEC] = bin2bcd(tm->tm_hour); @@ -556,24 +433,55 @@ static int rv3029_set_time(struct device *dev, struct rtc_time *tm) regs[RV3029_W_DAYS - RV3029_W_SEC] = bin2bcd(tm->tm_wday + 1) & 0x7; regs[RV3029_W_YEARS - RV3029_W_SEC] = bin2bcd(tm->tm_year - 100); - ret = rv3029_write_regs(dev, RV3029_W_SEC, regs, + ret = regmap_bulk_write(rv3029->regmap, RV3029_W_SEC, regs, RV3029_WATCH_SECTION_LEN); if (ret < 0) return ret; - ret = rv3029_get_sr(dev, regs); - if (ret < 0) { - dev_err(dev, "%s: reading SR failed\n", __func__); - return ret; - } - /* clear PON bit */ - ret = rv3029_set_sr(dev, (regs[0] & ~RV3029_STATUS_PON)); - if (ret < 0) { - dev_err(dev, "%s: reading SR failed\n", __func__); - return ret; + /* clear PON and VLOW2 bits */ + return regmap_update_bits(rv3029->regmap, RV3029_STATUS, + RV3029_STATUS_PON | RV3029_STATUS_VLOW2, 0); +} + +static int rv3029_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) +{ + struct rv3029_data *rv3029 = dev_get_drvdata(dev); + unsigned long vl = 0; + int sr, ret = 0; + + switch (cmd) { + case RTC_VL_READ: + ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr); + if (ret < 0) + return ret; + + if (sr & RV3029_STATUS_VLOW1) + vl = RTC_VL_ACCURACY_LOW; + + if (sr & (RV3029_STATUS_VLOW2 | RV3029_STATUS_PON)) + vl |= RTC_VL_DATA_INVALID; + + return put_user(vl, (unsigned int __user *)arg); + + case RTC_VL_CLR: + return regmap_update_bits(rv3029->regmap, RV3029_STATUS, + RV3029_STATUS_VLOW1, 0); + + default: + return -ENOIOCTLCMD; } +} - return 0; +static int rv3029_nvram_write(void *priv, unsigned int offset, void *val, + size_t bytes) +{ + return regmap_bulk_write(priv, RV3029_RAM_PAGE + offset, val, bytes); +} + +static int rv3029_nvram_read(void *priv, unsigned int offset, void *val, + size_t bytes) +{ + return regmap_bulk_read(priv, RV3029_RAM_PAGE + offset, val, bytes); } static const struct rv3029_trickle_tab_elem { @@ -635,6 +543,7 @@ static const struct rv3029_trickle_tab_elem { static void rv3029_trickle_config(struct device *dev) { + struct rv3029_data *rv3029 = dev_get_drvdata(dev); struct device_node *of_node = dev->of_node; const struct rv3029_trickle_tab_elem *elem; int i, err; @@ -661,7 +570,7 @@ static void rv3029_trickle_config(struct device *dev) "Trickle charger enabled at %d ohms resistance.\n", elem->r); } - err = rv3029_eeprom_update_bits(dev, RV3029_CONTROL_E2P_EECTRL, + err = rv3029_eeprom_update_bits(rv3029, RV3029_CONTROL_E2P_EECTRL, RV3029_TRICKLE_MASK, trickle_set_bits); if (err < 0) @@ -670,12 +579,12 @@ static void rv3029_trickle_config(struct device *dev) #ifdef CONFIG_RTC_DRV_RV3029_HWMON -static int rv3029_read_temp(struct device *dev, int *temp_mC) +static int rv3029_read_temp(struct rv3029_data *rv3029, int *temp_mC) { + unsigned int temp; int ret; - u8 temp; - ret = rv3029_read_regs(dev, RV3029_TEMP_PAGE, &temp, 1); + ret = regmap_read(rv3029->regmap, RV3029_TEMP_PAGE, &temp); if (ret < 0) return ret; @@ -688,9 +597,10 @@ static ssize_t rv3029_hwmon_show_temp(struct device *dev, struct device_attribute *attr, char *buf) { + struct rv3029_data *rv3029 = dev_get_drvdata(dev); int ret, temp_mC; - ret = rv3029_read_temp(dev, &temp_mC); + ret = rv3029_read_temp(rv3029, &temp_mC); if (ret < 0) return ret; @@ -702,9 +612,10 @@ static ssize_t rv3029_hwmon_set_update_interval(struct device *dev, const char *buf, size_t count) { + struct rv3029_data *rv3029 = dev_get_drvdata(dev); + unsigned int th_set_bits = 0; unsigned long interval_ms; int ret; - u8 th_set_bits = 0; ret = kstrtoul(buf, 10, &interval_ms); if (ret < 0) @@ -715,7 +626,7 @@ static ssize_t rv3029_hwmon_set_update_interval(struct device *dev, if (interval_ms >= 16000) th_set_bits |= RV3029_EECTRL_THP; } - ret = rv3029_eeprom_update_bits(dev, RV3029_CONTROL_E2P_EECTRL, + ret = rv3029_eeprom_update_bits(rv3029, RV3029_CONTROL_E2P_EECTRL, RV3029_EECTRL_THE | RV3029_EECTRL_THP, th_set_bits); if (ret < 0) @@ -728,10 +639,11 @@ static ssize_t rv3029_hwmon_show_update_interval(struct device *dev, struct device_attribute *attr, char *buf) { + struct rv3029_data *rv3029 = dev_get_drvdata(dev); int ret, interval_ms; u8 eectrl; - ret = rv3029_eeprom_read(dev, RV3029_CONTROL_E2P_EECTRL, + ret = rv3029_eeprom_read(rv3029, RV3029_CONTROL_E2P_EECTRL, &eectrl, 1); if (ret < 0) return ret; @@ -785,14 +697,23 @@ static void rv3029_hwmon_register(struct device *dev, const char *name) static struct rtc_class_ops rv3029_rtc_ops = { .read_time = rv3029_read_time, .set_time = rv3029_set_time, + .ioctl = rv3029_ioctl, }; static int rv3029_probe(struct device *dev, struct regmap *regmap, int irq, const char *name) { struct rv3029_data *rv3029; + struct nvmem_config nvmem_cfg = { + .name = "rv3029_nvram", + .word_size = 1, + .stride = 1, + .size = RV3029_RAM_SECTION_LEN, + .type = NVMEM_TYPE_BATTERY_BACKED, + .reg_read = rv3029_nvram_read, + .reg_write = rv3029_nvram_write, + }; int rc = 0; - u8 buf[1]; rv3029 = devm_kzalloc(dev, sizeof(*rv3029), GFP_KERNEL); if (!rv3029) @@ -803,21 +724,12 @@ static int rv3029_probe(struct device *dev, struct regmap *regmap, int irq, rv3029->dev = dev; dev_set_drvdata(dev, rv3029); - rc = rv3029_get_sr(dev, buf); - if (rc < 0) { - dev_err(dev, "reading status failed\n"); - return rc; - } - rv3029_trickle_config(dev); rv3029_hwmon_register(dev, name); - rv3029->rtc = devm_rtc_device_register(dev, name, &rv3029_rtc_ops, - THIS_MODULE); - if (IS_ERR(rv3029->rtc)) { - dev_err(dev, "unable to register the class device\n"); + rv3029->rtc = devm_rtc_allocate_device(dev); + if (IS_ERR(rv3029->rtc)) return PTR_ERR(rv3029->rtc); - } if (rv3029->irq > 0) { rc = devm_request_threaded_irq(dev, rv3029->irq, @@ -834,20 +746,48 @@ static int rv3029_probe(struct device *dev, struct regmap *regmap, int irq, } } + rv3029->rtc->ops = &rv3029_rtc_ops; + rv3029->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; + rv3029->rtc->range_max = RTC_TIMESTAMP_END_2079; + + rc = rtc_register_device(rv3029->rtc); + if (rc) + return rc; + + nvmem_cfg.priv = rv3029->regmap; + rtc_nvmem_register(rv3029->rtc, &nvmem_cfg); + return 0; } +static const struct regmap_range rv3029_holes_range[] = { + regmap_reg_range(0x05, 0x07), + regmap_reg_range(0x0f, 0x0f), + regmap_reg_range(0x17, 0x17), + regmap_reg_range(0x1a, 0x1f), + regmap_reg_range(0x21, 0x27), + regmap_reg_range(0x34, 0x37), +}; + +static const struct regmap_access_table rv3029_regs = { + .no_ranges = rv3029_holes_range, + .n_no_ranges = ARRAY_SIZE(rv3029_holes_range), +}; + +static const struct regmap_config config = { + .reg_bits = 8, + .val_bits = 8, + .rd_table = &rv3029_regs, + .wr_table = &rv3029_regs, + .max_register = 0x3f, +}; + #if IS_ENABLED(CONFIG_I2C) static int rv3029_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct regmap *regmap; - static const struct regmap_config config = { - .reg_bits = 8, - .val_bits = 8, - }; - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_BYTE)) { dev_err(&client->dev, "Adapter does not support SMBUS_I2C_BLOCK or SMBUS_I2C_BYTE\n"); @@ -855,11 +795,8 @@ static int rv3029_i2c_probe(struct i2c_client *client, } regmap = devm_regmap_init_i2c(client, &config); - if (IS_ERR(regmap)) { - dev_err(&client->dev, "%s: regmap allocation failed: %ld\n", - __func__, PTR_ERR(regmap)); + if (IS_ERR(regmap)) return PTR_ERR(regmap); - } return rv3029_probe(&client->dev, regmap, client->irq, client->name); } @@ -873,24 +810,20 @@ MODULE_DEVICE_TABLE(i2c, rv3029_id); static const struct of_device_id rv3029_of_match[] = { { .compatible = "microcrystal,rv3029" }, - /* Backward compatibility only, do not use compatibles below: */ - { .compatible = "rv3029" }, - { .compatible = "rv3029c2" }, - { .compatible = "mc,rv3029c2" }, { } }; MODULE_DEVICE_TABLE(of, rv3029_of_match); static struct i2c_driver rv3029_driver = { .driver = { - .name = "rtc-rv3029c2", + .name = "rv3029", .of_match_table = of_match_ptr(rv3029_of_match), }, .probe = rv3029_i2c_probe, .id_table = rv3029_id, }; -static int rv3029_register_driver(void) +static int __init rv3029_register_driver(void) { return i2c_add_driver(&rv3029_driver); } @@ -902,7 +835,7 @@ static void rv3029_unregister_driver(void) #else -static int rv3029_register_driver(void) +static int __init rv3029_register_driver(void) { return 0; } @@ -917,18 +850,11 @@ static void rv3029_unregister_driver(void) static int rv3049_probe(struct spi_device *spi) { - static const struct regmap_config config = { - .reg_bits = 8, - .val_bits = 8, - }; struct regmap *regmap; regmap = devm_regmap_init_spi(spi, &config); - if (IS_ERR(regmap)) { - dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n", - __func__, PTR_ERR(regmap)); + if (IS_ERR(regmap)) return PTR_ERR(regmap); - } return rv3029_probe(&spi->dev, regmap, spi->irq, "rv3049"); } @@ -940,24 +866,24 @@ static struct spi_driver rv3049_driver = { .probe = rv3049_probe, }; -static int rv3049_register_driver(void) +static int __init rv3049_register_driver(void) { return spi_register_driver(&rv3049_driver); } -static void rv3049_unregister_driver(void) +static void __exit rv3049_unregister_driver(void) { spi_unregister_driver(&rv3049_driver); } #else -static int rv3049_register_driver(void) +static int __init rv3049_register_driver(void) { return 0; } -static void rv3049_unregister_driver(void) +static void __exit rv3049_unregister_driver(void) { } @@ -968,16 +894,12 @@ static int __init rv30x9_init(void) int ret; ret = rv3029_register_driver(); - if (ret) { - pr_err("Failed to register rv3029 driver: %d\n", ret); + if (ret) return ret; - } ret = rv3049_register_driver(); - if (ret) { - pr_err("Failed to register rv3049 driver: %d\n", ret); + if (ret) rv3029_unregister_driver(); - } return ret; } diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c index 4960f0a2b249..93c3a6b627bd 100644 --- a/drivers/rtc/rtc-rv8803.c +++ b/drivers/rtc/rtc-rv8803.c @@ -411,6 +411,7 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { struct i2c_client *client = to_i2c_client(dev); struct rv8803_data *rv8803 = dev_get_drvdata(dev); + unsigned int vl = 0; int flags, ret = 0; switch (cmd) { @@ -419,18 +420,15 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) if (flags < 0) return flags; - if (flags & RV8803_FLAG_V1F) + if (flags & RV8803_FLAG_V1F) { dev_warn(&client->dev, "Voltage low, temperature compensation stopped.\n"); + vl = RTC_VL_ACCURACY_LOW; + } if (flags & RV8803_FLAG_V2F) - dev_warn(&client->dev, "Voltage low, data loss detected.\n"); - - flags &= RV8803_FLAG_V1F | RV8803_FLAG_V2F; + vl |= RTC_VL_DATA_INVALID; - if (copy_to_user((void __user *)arg, &flags, sizeof(int))) - return -EFAULT; - - return 0; + return put_user(vl, (unsigned int __user *)arg); case RTC_VL_CLR: mutex_lock(&rv8803->flags_lock); @@ -440,7 +438,7 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) return flags; } - flags &= ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F); + flags &= ~RV8803_FLAG_V1F; ret = rv8803_write_reg(client, RV8803_FLAG, flags); mutex_unlock(&rv8803->flags_lock); if (ret) diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c index 8102469e27c0..fe010151ec8f 100644 --- a/drivers/rtc/rtc-rx8010.c +++ b/drivers/rtc/rtc-rx8010.c @@ -389,9 +389,8 @@ static int rx8010_alarm_irq_enable(struct device *dev, static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { - struct i2c_client *client = to_i2c_client(dev); struct rx8010_data *rx8010 = dev_get_drvdata(dev); - int ret, tmp; + int tmp; int flagreg; switch (cmd) { @@ -400,24 +399,8 @@ static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) if (flagreg < 0) return flagreg; - tmp = !!(flagreg & RX8010_FLAG_VLF); - if (copy_to_user((void __user *)arg, &tmp, sizeof(int))) - return -EFAULT; - - return 0; - - case RTC_VL_CLR: - flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG); - if (flagreg < 0) { - return flagreg; - } - - flagreg &= ~RX8010_FLAG_VLF; - ret = i2c_smbus_write_byte_data(client, RX8010_FLAG, flagreg); - if (ret < 0) - return ret; - - return 0; + tmp = flagreg & RX8010_FLAG_VLF ? RTC_VL_DATA_INVALID : 0; + return put_user(tmp, (unsigned int __user *)arg); default: return -ENOIOCTLCMD; @@ -482,7 +465,7 @@ static int rx8010_probe(struct i2c_client *client, rx8010->rtc->max_user_freq = 1; - return err; + return 0; } static struct i2c_driver rx8010_driver = { diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c index b9bda10589e0..a24f85893f90 100644 --- a/drivers/rtc/rtc-rx8025.c +++ b/drivers/rtc/rtc-rx8025.c @@ -67,7 +67,6 @@ static const struct i2c_device_id rx8025_id[] = { MODULE_DEVICE_TABLE(i2c, rx8025_id); struct rx8025_data { - struct i2c_client *client; struct rtc_device *rtc; u8 ctrl1; }; @@ -103,10 +102,10 @@ static s32 rx8025_write_regs(const struct i2c_client *client, static int rx8025_check_validity(struct device *dev) { - struct rx8025_data *rx8025 = dev_get_drvdata(dev); + struct i2c_client *client = to_i2c_client(dev); int ctrl2; - ctrl2 = rx8025_read_reg(rx8025->client, RX8025_REG_CTRL2); + ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2); if (ctrl2 < 0) return ctrl2; @@ -178,6 +177,7 @@ out: static int rx8025_get_time(struct device *dev, struct rtc_time *dt) { + struct i2c_client *client = to_i2c_client(dev); struct rx8025_data *rx8025 = dev_get_drvdata(dev); u8 date[7]; int err; @@ -186,7 +186,7 @@ static int rx8025_get_time(struct device *dev, struct rtc_time *dt) if (err) return err; - err = rx8025_read_regs(rx8025->client, RX8025_REG_SEC, 7, date); + err = rx8025_read_regs(client, RX8025_REG_SEC, 7, date); if (err) return err; @@ -211,6 +211,7 @@ static int rx8025_get_time(struct device *dev, struct rtc_time *dt) static int rx8025_set_time(struct device *dev, struct rtc_time *dt) { + struct i2c_client *client = to_i2c_client(dev); struct rx8025_data *rx8025 = dev_get_drvdata(dev); u8 date[7]; int ret; @@ -237,11 +238,11 @@ static int rx8025_set_time(struct device *dev, struct rtc_time *dt) dev_dbg(dev, "%s: write %7ph\n", __func__, date); - ret = rx8025_write_regs(rx8025->client, RX8025_REG_SEC, 7, date); + ret = rx8025_write_regs(client, RX8025_REG_SEC, 7, date); if (ret < 0) return ret; - return rx8025_reset_validity(rx8025->client); + return rx8025_reset_validity(client); } static int rx8025_init_client(struct i2c_client *client) @@ -251,7 +252,7 @@ static int rx8025_init_client(struct i2c_client *client) int need_clear = 0; int err; - err = rx8025_read_regs(rx8025->client, RX8025_REG_CTRL1, 2, ctrl); + err = rx8025_read_regs(client, RX8025_REG_CTRL1, 2, ctrl); if (err) goto out; @@ -280,8 +281,8 @@ out: /* Alarm support */ static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t) { + struct i2c_client *client = to_i2c_client(dev); struct rx8025_data *rx8025 = dev_get_drvdata(dev); - struct i2c_client *client = rx8025->client; u8 ald[2]; int ctrl2, err; @@ -347,18 +348,18 @@ static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t) if (rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE) { rx8025->ctrl1 &= ~RX8025_BIT_CTRL1_DALE; - err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1, + err = rx8025_write_reg(client, RX8025_REG_CTRL1, rx8025->ctrl1); if (err) return err; } - err = rx8025_write_regs(rx8025->client, RX8025_REG_ALDMIN, 2, ald); + err = rx8025_write_regs(client, RX8025_REG_ALDMIN, 2, ald); if (err) return err; if (t->enabled) { rx8025->ctrl1 |= RX8025_BIT_CTRL1_DALE; - err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1, + err = rx8025_write_reg(client, RX8025_REG_CTRL1, rx8025->ctrl1); if (err) return err; @@ -369,6 +370,7 @@ static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t) static int rx8025_alarm_irq_enable(struct device *dev, unsigned int enabled) { + struct i2c_client *client = to_i2c_client(dev); struct rx8025_data *rx8025 = dev_get_drvdata(dev); u8 ctrl1; int err; @@ -381,7 +383,7 @@ static int rx8025_alarm_irq_enable(struct device *dev, unsigned int enabled) if (ctrl1 != rx8025->ctrl1) { rx8025->ctrl1 = ctrl1; - err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1, + err = rx8025_write_reg(client, RX8025_REG_CTRL1, rx8025->ctrl1); if (err) return err; @@ -516,7 +518,6 @@ static int rx8025_probe(struct i2c_client *client, if (!rx8025) return -ENOMEM; - rx8025->client = client; i2c_set_clientdata(client, rx8025); err = rx8025_init_client(client); diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c index 781cabb2afca..d774aa18f57a 100644 --- a/drivers/rtc/rtc-stm32.c +++ b/drivers/rtc/rtc-stm32.c @@ -897,8 +897,11 @@ static int stm32_rtc_resume(struct device *dev) } ret = stm32_rtc_wait_sync(rtc); - if (ret < 0) + if (ret < 0) { + if (rtc->data->has_pclk) + clk_disable_unprepare(rtc->pclk); return ret; + } if (device_may_wakeup(dev)) return disable_irq_wake(rtc->irq_alarm); diff --git a/drivers/rtc/rtc-tps6586x.c b/drivers/rtc/rtc-tps6586x.c index 859d901fa6cb..e39af2d67051 100644 --- a/drivers/rtc/rtc-tps6586x.c +++ b/drivers/rtc/rtc-tps6586x.c @@ -23,6 +23,7 @@ #include <linux/device.h> #include <linux/err.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/kernel.h> #include <linux/mfd/tps6586x.h> #include <linux/module.h> @@ -267,6 +268,8 @@ static int tps6586x_rtc_probe(struct platform_device *pdev) rtc->rtc->start_secs = mktime64(2009, 1, 1, 0, 0, 0); rtc->rtc->set_start_time = true; + irq_set_status_flags(rtc->irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL, tps6586x_rtc_irq, IRQF_ONESHOT, @@ -276,7 +279,6 @@ static int tps6586x_rtc_probe(struct platform_device *pdev) rtc->irq, ret); goto fail_rtc_register; } - disable_irq(rtc->irq); ret = rtc_register_device(rtc->rtc); if (ret) diff --git a/drivers/rtc/rtc-zynqmp.c b/drivers/rtc/rtc-zynqmp.c index 539690568298..5786866c09e9 100644 --- a/drivers/rtc/rtc-zynqmp.c +++ b/drivers/rtc/rtc-zynqmp.c @@ -94,7 +94,7 @@ static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm) * RTC has updated the CURRENT_TIME with the time written into * SET_TIME_WRITE register. */ - rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_CUR_TM), tm); + read_time = readl(xrtcdev->reg_base + RTC_CUR_TM); } else { /* * Time written in SET_TIME_WRITE has not yet updated into @@ -104,8 +104,8 @@ static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm) * reading. */ read_time = readl(xrtcdev->reg_base + RTC_SET_TM_RD) - 1; - rtc_time64_to_tm(read_time, tm); } + rtc_time64_to_tm(read_time, tm); return 0; } |