Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits)
  [SCSI] gdth: fix CONFIG_ISA build failure
  [SCSI] esp_scsi: remove __dev{init,exit}
  [SCSI] gdth: !use_sg cleanup and use of scsi accessors
  [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
  [SCSI] gdth: Setup proper per-command private data
  [SCSI] gdth: Remove gdth_ctr_tab[]
  [SCSI] gdth: switch to modern scsi host registration
  [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
  [SCSI] gdth: clean up host private data
  [SCSI] gdth: Remove virt hosts
  [SCSI] gdth: Reorder scsi_host_template intitializers
  [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers
  [SCSI] gdth: Remove 2.4.x support, in-kernel changelog
  [SCSI] gdth: split out pci probing
  [SCSI] gdth: split out eisa probing
  [SCSI] gdth: split out isa probing
  gdth: Make one abuse of scsi_cmnd less obvious
  [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
  [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution
  [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
  ...

10 files changed, 364 insertions, 262 deletions

diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 90aa53fc4f3e..7507067351bd 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -891,7 +891,7 @@ zfcp_unit_dequeue(struct zfcp_unit *unit)
 /*
  * Allocates a combined QTCB/fsf_req buffer for erp actions and fcp/SCSI
  * commands.
- * It also genrates fcp-nameserver request/response buffer and unsolicited 
+ * It also genrates fcp-nameserver request/response buffer and unsolicited
  * status read fsf_req buffers.
  *
  * locks:       must only be called with zfcp_data.config_sema taken
@@ -982,7 +982,7 @@ zfcp_adapter_enqueue(struct ccw_device *ccw_device)
 	struct zfcp_adapter *adapter;
 
 	/*
-	 * Note: It is safe to release the list_lock, as any list changes 
+	 * Note: It is safe to release the list_lock, as any list changes
 	 * are protected by the config_sema, which must be held to get here
 	 */
 
@@ -1038,6 +1038,10 @@ zfcp_adapter_enqueue(struct ccw_device *ccw_device)
 	spin_lock_init(&adapter->san_dbf_lock);
 	spin_lock_init(&adapter->scsi_dbf_lock);
 
+	retval = zfcp_adapter_debug_register(adapter);
+	if (retval)
+		goto debug_register_failed;
+
 	/* initialize error recovery stuff */
 
 	rwlock_init(&adapter->erp_lock);
@@ -1058,7 +1062,6 @@ zfcp_adapter_enqueue(struct ccw_device *ccw_device)
 	/* mark adapter unusable as long as sysfs registration is not complete */
 	atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
 
-	adapter->ccw_device = ccw_device;
 	dev_set_drvdata(&ccw_device->dev, adapter);
 
 	if (zfcp_sysfs_adapter_create_files(&ccw_device->dev))
@@ -1085,6 +1088,8 @@ zfcp_adapter_enqueue(struct ccw_device *ccw_device)
  generic_services_failed:
 	zfcp_sysfs_adapter_remove_files(&adapter->ccw_device->dev);
  sysfs_failed:
+	zfcp_adapter_debug_unregister(adapter);
+ debug_register_failed:
 	dev_set_drvdata(&ccw_device->dev, NULL);
 	zfcp_reqlist_free(adapter);
  failed_low_mem_buffers:
@@ -1130,6 +1135,8 @@ zfcp_adapter_dequeue(struct zfcp_adapter *adapter)
 		goto out;
 	}
 
+	zfcp_adapter_debug_unregister(adapter);
+
 	/* remove specified adapter data structure from list */
 	write_lock_irq(&zfcp_data.config_lock);
 	list_del(&adapter->list);
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index c0d1c0eb3209..e01cbf152a81 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -148,15 +148,12 @@ zfcp_ccw_set_online(struct ccw_device *ccw_device)
 	down(&zfcp_data.config_sema);
 	adapter = dev_get_drvdata(&ccw_device->dev);
 
-	retval = zfcp_adapter_debug_register(adapter);
-	if (retval)
-		goto out;
 	retval = zfcp_erp_thread_setup(adapter);
 	if (retval) {
 		ZFCP_LOG_INFO("error: start of error recovery thread for "
 			      "adapter %s failed\n",
 			      zfcp_get_busid_by_adapter(adapter));
-		goto out_erp_thread;
+		goto out;
 	}
 
 	retval = zfcp_adapter_scsi_register(adapter);
@@ -175,8 +172,6 @@ zfcp_ccw_set_online(struct ccw_device *ccw_device)
 
  out_scsi_register:
 	zfcp_erp_thread_kill(adapter);
- out_erp_thread:
-	zfcp_adapter_debug_unregister(adapter);
  out:
 	up(&zfcp_data.config_sema);
 	return retval;
@@ -199,7 +194,6 @@ zfcp_ccw_set_offline(struct ccw_device *ccw_device)
 	zfcp_erp_adapter_shutdown(adapter, 0);
 	zfcp_erp_wait(adapter);
 	zfcp_erp_thread_kill(adapter);
-	zfcp_adapter_debug_unregister(adapter);
 	up(&zfcp_data.config_sema);
 	return 0;
 }
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index b36dfc40d9fa..16e5563e0c65 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -1,23 +1,23 @@
-/* 
+/*
  * This file is part of the zfcp device driver for
  * FCP adapters for IBM System z9 and zSeries.
  *
  * (C) Copyright IBM Corp. 2002, 2006
- * 
- * This program is free software; you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation; either version 2, or (at your option) 
- * any later version. 
- * 
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- * 
- * You should have received a copy of the GNU General Public License 
- * along with this program; if not, write to the Free Software 
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 
- */ 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
 
 #ifndef ZFCP_DEF_H
 #define ZFCP_DEF_H
@@ -90,7 +90,7 @@ zfcp_address_to_sg(void *address, struct scatterlist *list)
 #define ZFCP_DEVICE_TYPE        0x1732
 #define ZFCP_DEVICE_MODEL       0x03
 #define ZFCP_DEVICE_MODEL_PRIV	0x04
- 
+
 /* allow as many chained SBALs as are supported by hardware */
 #define ZFCP_MAX_SBALS_PER_REQ		FSF_MAX_SBALS_PER_REQ
 #define ZFCP_MAX_SBALS_PER_CT_REQ	FSF_MAX_SBALS_PER_REQ
@@ -508,7 +508,7 @@ struct zfcp_rc_entry {
 
 /*
  * this allows removal of logging code by the preprocessor
- * (the most detailed log level still to be compiled in is specified, 
+ * (the most detailed log level still to be compiled in is specified,
  * higher log levels are removed)
  */
 #define ZFCP_LOG_LEVEL_LIMIT	ZFCP_LOG_LEVEL_TRACE
@@ -546,7 +546,7 @@ do { \
 	if (ZFCP_LOG_CHECK(level)) \
 		_ZFCP_LOG(fmt, ##args); \
 } while (0)
-	
+
 #if ZFCP_LOG_LEVEL_LIMIT < ZFCP_LOG_LEVEL_NORMAL
 # define ZFCP_LOG_NORMAL(fmt, args...)	do { } while (0)
 #else
@@ -583,8 +583,8 @@ do { \
 
 /*************** ADAPTER/PORT/UNIT AND FSF_REQ STATUS FLAGS ******************/
 
-/* 
- * Note, the leftmost status byte is common among adapter, port 
+/*
+ * Note, the leftmost status byte is common among adapter, port
  * and unit
  */
 #define ZFCP_COMMON_FLAGS			0xfff00000
@@ -1007,8 +1007,8 @@ struct zfcp_fsf_req {
 	u32		       fsf_command;    /* FSF Command copy */
 	struct fsf_qtcb	       *qtcb;	       /* address of associated QTCB */
 	u32		       seq_no;         /* Sequence number of request */
-        unsigned long          data;           /* private data of request */ 
-	struct timer_list      timer;	       /* used for erp or scsi er */
+	unsigned long	       data;           /* private data of request */
+	struct timer_list     timer;	       /* used for erp or scsi er */
 	struct zfcp_erp_action *erp_action;    /* used if this request is
 						  issued on behalf of erp */
 	mempool_t	       *pool;	       /* used if request was alloacted
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 16b4418ab257..a6475a2bb8a7 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -1,22 +1,22 @@
-/* 
+/*
  * This file is part of the zfcp device driver for
  * FCP adapters for IBM System z9 and zSeries.
  *
  * (C) Copyright IBM Corp. 2002, 2006
- * 
- * This program is free software; you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation; either version 2, or (at your option) 
- * any later version. 
- * 
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- * 
- * You should have received a copy of the GNU General Public License 
- * along with this program; if not, write to the Free Software 
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #define ZFCP_LOG_AREA			ZFCP_LOG_AREA_ERP
@@ -191,7 +191,7 @@ void zfcp_fsf_start_timer(struct zfcp_fsf_req *fsf_req, unsigned long timeout)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	called if an adapter failed,
  *		initiates adapter recovery which is done
@@ -228,7 +228,7 @@ zfcp_erp_adapter_reopen_internal(struct zfcp_adapter *adapter, int clear_mask)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	Wrappper for zfcp_erp_adapter_reopen_internal
  *              used to ensure the correct locking
@@ -476,7 +476,7 @@ zfcp_test_link(struct zfcp_port *port)
 
 
 /*
- * function:	
+ * function:
  *
  * purpose:	called if a port failed to be opened normally
  *		initiates Forced Reopen recovery which is done
@@ -517,7 +517,7 @@ zfcp_erp_port_forced_reopen_internal(struct zfcp_port *port, int clear_mask)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	Wrappper for zfcp_erp_port_forced_reopen_internal
  *              used to ensure the correct locking
@@ -543,7 +543,7 @@ zfcp_erp_port_forced_reopen(struct zfcp_port *port, int clear_mask)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	called if a port is to be opened
  *		initiates Reopen recovery which is done
@@ -612,7 +612,7 @@ zfcp_erp_port_reopen(struct zfcp_port *port, int clear_mask)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	called if a unit is to be opened
  *		initiates Reopen recovery which is done
@@ -704,7 +704,7 @@ static void zfcp_erp_adapter_unblock(struct zfcp_adapter *adapter)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	disable I/O,
  *		return any open requests and clean them up,
@@ -725,7 +725,7 @@ zfcp_erp_port_block(struct zfcp_port *port, int clear_mask)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	enable I/O
  *
@@ -742,7 +742,7 @@ zfcp_erp_port_unblock(struct zfcp_port *port)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	disable I/O,
  *		return any open requests and clean them up,
@@ -763,7 +763,7 @@ zfcp_erp_unit_block(struct zfcp_unit *unit, int clear_mask)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	enable I/O
  *
@@ -792,7 +792,7 @@ zfcp_erp_action_ready(struct zfcp_erp_action *erp_action)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:
  *
@@ -967,7 +967,7 @@ static void zfcp_erp_timeout_handler(unsigned long data)
  * zfcp_erp_action_dismiss - dismiss an erp_action
  *
  * adapter->erp_lock must be held
- * 
+ *
  * Dismissal of an erp_action is usually required if an erp_action of
  * higher priority is generated.
  */
@@ -1005,9 +1005,9 @@ zfcp_erp_thread_setup(struct zfcp_adapter *adapter)
 }
 
 /*
- * function:	
+ * function:
  *
- * purpose:	
+ * purpose:
  *
  * returns:
  *
@@ -1094,7 +1094,7 @@ zfcp_erp_thread(void *data)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	drives single error recovery action and schedules higher and
  *		subordinate actions, if necessary
@@ -1206,7 +1206,7 @@ zfcp_erp_strategy(struct zfcp_erp_action *erp_action)
 
 	/*
 	 * put this target through the erp mill again if someone has
-	 * requested to change the status of a target being online 
+	 * requested to change the status of a target being online
 	 * to offline or the other way around
 	 * (old retval is preserved if nothing has to be done here)
 	 */
@@ -1228,7 +1228,7 @@ zfcp_erp_strategy(struct zfcp_erp_action *erp_action)
  unlock:
 	write_unlock(&adapter->erp_lock);
 	read_unlock_irqrestore(&zfcp_data.config_lock, flags);
-	
+
 	if (retval != ZFCP_ERP_CONTINUES)
 		zfcp_erp_action_cleanup(action, adapter, port, unit, retval);
 
@@ -1250,9 +1250,9 @@ zfcp_erp_strategy(struct zfcp_erp_action *erp_action)
 }
 
 /*
- * function:	
+ * function:
  *
- * purpose:	
+ * purpose:
  *
  * returns:	ZFCP_ERP_DISMISSED	- if action has been dismissed
  *		retval			- otherwise
@@ -1322,7 +1322,7 @@ zfcp_erp_strategy_do_action(struct zfcp_erp_action *erp_action)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	triggers retry of this action after a certain amount of time
  *		by means of timer provided by erp_action
@@ -1346,7 +1346,7 @@ zfcp_erp_strategy_memwait(struct zfcp_erp_action *erp_action)
 	return retval;
 }
 
-/* 
+/*
  * function:    zfcp_erp_adapter_failed
  *
  * purpose:     sets the adapter and all underlying devices to ERP_FAILED
@@ -1362,7 +1362,7 @@ zfcp_erp_adapter_failed(struct zfcp_adapter *adapter)
 	debug_text_event(adapter->erp_dbf, 2, "a_afail");
 }
 
-/* 
+/*
  * function:    zfcp_erp_port_failed
  *
  * purpose:     sets the port and all underlying devices to ERP_FAILED
@@ -1386,7 +1386,7 @@ zfcp_erp_port_failed(struct zfcp_port *port)
 	debug_event(port->adapter->erp_dbf, 2, &port->wwpn, sizeof (wwn_t));
 }
 
-/* 
+/*
  * function:    zfcp_erp_unit_failed
  *
  * purpose:     sets the unit to ERP_FAILED
@@ -1417,7 +1417,7 @@ zfcp_erp_unit_failed(struct zfcp_unit *unit)
  *              successfully is reset.
  *
  * returns:	ZFCP_ERP_CONTINUES	- action continues (not considered)
- *		ZFCP_ERP_SUCCEEDED	- action finished successfully 
+ *		ZFCP_ERP_SUCCEEDED	- action finished successfully
  *		ZFCP_ERP_EXIT		- action failed and will not continue
  */
 static int
@@ -1646,7 +1646,7 @@ zfcp_erp_schedule_work(struct zfcp_unit *unit)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	remaining things in good cases,
  *		escalation in bad cases
@@ -1687,8 +1687,8 @@ zfcp_erp_strategy_followup_actions(int action,
 		break;
 
 	case ZFCP_ERP_ACTION_REOPEN_UNIT:
-		if (status == ZFCP_ERP_SUCCEEDED) ;	/* no further action */
-		else
+		/* Nothing to do if status == ZFCP_ERP_SUCCEEDED */
+		if (status != ZFCP_ERP_SUCCEEDED)
 			zfcp_erp_port_reopen_internal(unit->port, 0);
 		break;
 	}
@@ -1815,7 +1815,7 @@ zfcp_erp_modify_unit_status(struct zfcp_unit *unit, u32 mask, int set_or_clear)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	Wrappper for zfcp_erp_port_reopen_all_internal
  *              used to ensure the correct locking
@@ -1852,9 +1852,9 @@ zfcp_erp_port_reopen_all_internal(struct zfcp_adapter *adapter, int clear_mask)
 }
 
 /*
- * function:	
+ * function:
  *
- * purpose:	
+ * purpose:
  *
  * returns:	FIXME
  */
@@ -1871,7 +1871,7 @@ zfcp_erp_unit_reopen_all_internal(struct zfcp_port *port, int clear_mask)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	this routine executes the 'Reopen Adapter' action
  *		(the entire action is processed synchronously, since
@@ -1908,9 +1908,9 @@ zfcp_erp_adapter_strategy(struct zfcp_erp_action *erp_action)
 }
 
 /*
- * function:	
+ * function:
  *
- * purpose:	
+ * purpose:
  *
  * returns:	ZFCP_ERP_SUCCEEDED      - action finished successfully
  *              ZFCP_ERP_FAILED         - action finished unsuccessfully
@@ -1930,9 +1930,9 @@ zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *erp_action)
 }
 
 /*
- * function:	
+ * function:
  *
- * purpose:	
+ * purpose:
  *
  * returns:	ZFCP_ERP_SUCCEEDED      - action finished successfully
  *              ZFCP_ERP_FAILED         - action finished unsuccessfully
@@ -1957,7 +1957,7 @@ zfcp_erp_adapter_strategy_open(struct zfcp_erp_action *erp_action)
  * purpose:	allocate the irq associated with this devno and register
  *		the FSF adapter with the SCSI stack
  *
- * returns:	
+ * returns:
  */
 static int
 zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *erp_action, int close)
@@ -2197,7 +2197,7 @@ zfcp_erp_adapter_strategy_open_fsf_xport(struct zfcp_erp_action *erp_action)
 	zfcp_erp_action_to_running(erp_action);
 	write_unlock_irq(&adapter->erp_lock);
 
-	ret = zfcp_fsf_exchange_port_data(erp_action, adapter, NULL);
+	ret = zfcp_fsf_exchange_port_data(erp_action);
 	if (ret == -EOPNOTSUPP) {
 		debug_text_event(adapter->erp_dbf, 3, "a_xport_notsupp");
 		return ZFCP_ERP_SUCCEEDED;
@@ -2249,7 +2249,7 @@ zfcp_erp_adapter_strategy_open_fsf_statusread(struct zfcp_erp_action
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	this routine executes the 'Reopen Physical Port' action
  *
@@ -2308,7 +2308,7 @@ zfcp_erp_port_forced_strategy(struct zfcp_erp_action *erp_action)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	this routine executes the 'Reopen Port' action
  *
@@ -2530,7 +2530,7 @@ zfcp_erp_port_strategy_open_nameserver(struct zfcp_erp_action *erp_action)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	makes the erp thread continue with reopen (physical) port
  *		actions which have been paused until the name server port
@@ -2570,9 +2570,9 @@ zfcp_erp_port_strategy_open_nameserver_wakeup(struct zfcp_erp_action
 }
 
 /*
- * function:	
+ * function:
  *
- * purpose:	
+ * purpose:
  *
  * returns:	ZFCP_ERP_CONTINUES	- action continues (asynchronously)
  *		ZFCP_ERP_FAILED		- action finished unsuccessfully
@@ -2626,9 +2626,9 @@ zfcp_erp_port_strategy_clearstati(struct zfcp_port *port)
 }
 
 /*
- * function:	
+ * function:
  *
- * purpose:	
+ * purpose:
  *
  * returns:	ZFCP_ERP_CONTINUES	- action continues (asynchronously)
  *		ZFCP_ERP_FAILED		- action finished unsuccessfully
@@ -2663,9 +2663,9 @@ zfcp_erp_port_strategy_close(struct zfcp_erp_action *erp_action)
 }
 
 /*
- * function:	
+ * function:
  *
- * purpose:	
+ * purpose:
  *
  * returns:	ZFCP_ERP_CONTINUES	- action continues (asynchronously)
  *		ZFCP_ERP_FAILED		- action finished unsuccessfully
@@ -2700,9 +2700,9 @@ zfcp_erp_port_strategy_open_port(struct zfcp_erp_action *erp_action)
 }
 
 /*
- * function:	
+ * function:
  *
- * purpose:	
+ * purpose:
  *
  * returns:	ZFCP_ERP_CONTINUES	- action continues (asynchronously)
  *		ZFCP_ERP_FAILED		- action finished unsuccessfully
@@ -2737,7 +2737,7 @@ zfcp_erp_port_strategy_open_common_lookup(struct zfcp_erp_action *erp_action)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	this routine executes the 'Reopen Unit' action
  *		currently no retries
@@ -2825,9 +2825,9 @@ zfcp_erp_unit_strategy_clearstati(struct zfcp_unit *unit)
 }
 
 /*
- * function:	
+ * function:
  *
- * purpose:	
+ * purpose:
  *
  * returns:	ZFCP_ERP_CONTINUES	- action continues (asynchronously)
  *		ZFCP_ERP_FAILED		- action finished unsuccessfully
@@ -2865,9 +2865,9 @@ zfcp_erp_unit_strategy_close(struct zfcp_erp_action *erp_action)
 }
 
 /*
- * function:	
+ * function:
  *
- * purpose:	
+ * purpose:
  *
  * returns:	ZFCP_ERP_CONTINUES	- action continues (asynchronously)
  *		ZFCP_ERP_FAILED		- action finished unsuccessfully
@@ -2913,7 +2913,7 @@ void zfcp_erp_start_timer(struct zfcp_fsf_req *fsf_req)
 }
 
 /*
- * function:	
+ * function:
  *
  * purpose:	enqueue the specified error recovery action, if needed
  *
@@ -2992,7 +2992,7 @@ zfcp_erp_action_enqueue(int action,
 					      port->erp_action.action);
 				debug_text_event(adapter->erp_dbf, 4,
 						 "pf_actenq_drp");
-			} else 
+			} else
 				debug_text_event(adapter->erp_dbf, 4,
 						 "pf_actenq_drpcp");
 			debug_event(adapter->erp_dbf, 4, &port->wwpn,
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 991d45667a44..8534cf09546c 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -1,22 +1,22 @@
-/* 
+/*
  * This file is part of the zfcp device driver for
  * FCP adapters for IBM System z9 and zSeries.
  *
  * (C) Copyright IBM Corp. 2002, 2006
- * 
- * This program is free software; you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation; either version 2, or (at your option) 
- * any later version. 
- * 
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- * 
- * You should have received a copy of the GNU General Public License 
- * along with this program; if not, write to the Free Software 
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef ZFCP_EXT_H
@@ -82,9 +82,11 @@ extern int  zfcp_fsf_open_unit(struct zfcp_erp_action *);
 extern int  zfcp_fsf_close_unit(struct zfcp_erp_action *);
 
 extern int  zfcp_fsf_exchange_config_data(struct zfcp_erp_action *);
-extern int  zfcp_fsf_exchange_port_data(struct zfcp_erp_action *,
-					struct zfcp_adapter *,
-					struct fsf_qtcb_bottom_port *);
+extern int  zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *,
+                                              struct fsf_qtcb_bottom_config *);
+extern int  zfcp_fsf_exchange_port_data(struct zfcp_erp_action *);
+extern int  zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *,
+                                             struct fsf_qtcb_bottom_port *);
 extern int  zfcp_fsf_control_file(struct zfcp_adapter *, struct zfcp_fsf_req **,
 				  u32, u32, struct zfcp_sg_list *);
 extern void zfcp_fsf_start_timer(struct zfcp_fsf_req *, unsigned long);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 99299976e891..ff866ebd44ac 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -80,10 +80,10 @@ static const char zfcp_act_subtable_type[5][8] = {
 /*
  * function:	zfcp_fsf_req_alloc
  *
- * purpose:     Obtains an fsf_req and potentially a qtcb (for all but 
+ * purpose:     Obtains an fsf_req and potentially a qtcb (for all but
  *              unsolicited requests) via helper functions
  *              Does some initial fsf request set-up.
- *              
+ *
  * returns:	pointer to allocated fsf_req if successfull
  *              NULL otherwise
  *
@@ -192,7 +192,7 @@ void zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter)
  * returns:	0 - success
  *		!0 - failure
  *
- * context:	
+ * context:
  */
 int
 zfcp_fsf_req_complete(struct zfcp_fsf_req *fsf_req)
@@ -214,8 +214,8 @@ zfcp_fsf_req_complete(struct zfcp_fsf_req *fsf_req)
 	}
 
 	/*
-	 * fsf_req may be deleted due to waking up functions, so 
-	 * cleanup is saved here and used later 
+	 * fsf_req may be deleted due to waking up functions, so
+	 * cleanup is saved here and used later
 	 */
 	if (likely(fsf_req->status & ZFCP_STATUS_FSFREQ_CLEANUP))
 		cleanup = 1;
@@ -259,9 +259,9 @@ zfcp_fsf_req_complete(struct zfcp_fsf_req *fsf_req)
  *		and initiates appropriate actions
  *		(usually calling FSF command specific handlers)
  *
- * returns:	
+ * returns:
  *
- * context:	
+ * context:
  *
  * locks:
  */
@@ -638,7 +638,7 @@ zfcp_fsf_link_down_info_eval(struct zfcp_adapter *adapter,
  *
  * purpose:	calls the appropriate command specific handler
  *
- * returns:	
+ * returns:
  */
 static int
 zfcp_fsf_req_dispatch(struct zfcp_fsf_req *fsf_req)
@@ -854,7 +854,7 @@ zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *fsf_req)
  *
  * purpose:	is called for finished Open Port command
  *
- * returns:	
+ * returns:
  */
 static int
 zfcp_fsf_status_read_handler(struct zfcp_fsf_req *fsf_req)
@@ -1088,7 +1088,7 @@ zfcp_fsf_status_read_handler(struct zfcp_fsf_req *fsf_req)
  * returns:	address of initiated FSF request
  *		NULL - request could not be initiated
  *
- * FIXME(design): should be watched by a timeout !!! 
+ * FIXME(design): should be watched by a timeout !!!
  * FIXME(design) shouldn't this be modified to return an int
  *               also...don't know how though
  */
@@ -1157,7 +1157,7 @@ zfcp_fsf_abort_fcp_command(unsigned long old_req_id,
  *
  * purpose:	is called for finished Abort FCP Command request
  *
- * returns:	
+ * returns:
  */
 static int
 zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *new_fsf_req)
@@ -1941,25 +1941,28 @@ zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
 {
 	volatile struct qdio_buffer_element *sbale;
 	struct zfcp_fsf_req *fsf_req;
+	struct zfcp_adapter *adapter = erp_action->adapter;
 	unsigned long lock_flags;
-	int retval = 0;
+	int retval;
 
 	/* setup new FSF request */
-	retval = zfcp_fsf_req_create(erp_action->adapter,
+	retval = zfcp_fsf_req_create(adapter,
 				     FSF_QTCB_EXCHANGE_CONFIG_DATA,
 				     ZFCP_REQ_AUTO_CLEANUP,
-				     erp_action->adapter->pool.fsf_req_erp,
+				     adapter->pool.fsf_req_erp,
 				     &lock_flags, &fsf_req);
-	if (retval < 0) {
+	if (retval) {
 		ZFCP_LOG_INFO("error: Could not create exchange configuration "
 			      "data request for adapter %s.\n",
-			      zfcp_get_busid_by_adapter(erp_action->adapter));
-		goto out;
+			      zfcp_get_busid_by_adapter(adapter));
+		write_unlock_irqrestore(&adapter->request_queue.queue_lock,
+					lock_flags);
+		return retval;
 	}
 
 	sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
-        sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
-        sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
+	sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
+	sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
 
 	fsf_req->qtcb->bottom.config.feature_selection =
 			FSF_FEATURE_CFDC |
@@ -1971,23 +1974,71 @@ zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
 
 	zfcp_erp_start_timer(fsf_req);
 	retval = zfcp_fsf_req_send(fsf_req);
+	write_unlock_irqrestore(&adapter->request_queue.queue_lock,
+				lock_flags);
 	if (retval) {
-		ZFCP_LOG_INFO
-		    ("error: Could not send exchange configuration data "
-		     "command on the adapter %s\n",
-		     zfcp_get_busid_by_adapter(erp_action->adapter));
+		ZFCP_LOG_INFO("error: Could not send exchange configuration "
+			      "data command on the adapter %s\n",
+			      zfcp_get_busid_by_adapter(adapter));
 		zfcp_fsf_req_free(fsf_req);
 		erp_action->fsf_req = NULL;
-		goto out;
 	}
+	else
+		ZFCP_LOG_DEBUG("exchange configuration data request initiated "
+			       "(adapter %s)\n",
+			       zfcp_get_busid_by_adapter(adapter));
 
-	ZFCP_LOG_DEBUG("exchange configuration data request initiated "
-		       "(adapter %s)\n",
-		       zfcp_get_busid_by_adapter(erp_action->adapter));
+	return retval;
+}
 
- out:
-	write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock,
+int
+zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
+				struct fsf_qtcb_bottom_config *data)
+{
+	volatile struct qdio_buffer_element *sbale;
+	struct zfcp_fsf_req *fsf_req;
+	unsigned long lock_flags;
+	int retval;
+
+	/* setup new FSF request */
+	retval = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
+				     0, NULL, &lock_flags, &fsf_req);
+	if (retval) {
+		ZFCP_LOG_INFO("error: Could not create exchange configuration "
+			      "data request for adapter %s.\n",
+			      zfcp_get_busid_by_adapter(adapter));
+		write_unlock_irqrestore(&adapter->request_queue.queue_lock,
+					lock_flags);
+		return retval;
+	}
+
+	sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
+	sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
+	sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
+
+	fsf_req->qtcb->bottom.config.feature_selection =
+			FSF_FEATURE_CFDC |
+			FSF_FEATURE_LUN_SHARING |
+			FSF_FEATURE_NOTIFICATION_LOST |
+			FSF_FEATURE_UPDATE_ALERT;
+
+	if (data)
+		fsf_req->data = (unsigned long) data;
+
+	zfcp_fsf_start_timer(fsf_req, ZFCP_FSF_REQUEST_TIMEOUT);
+	retval = zfcp_fsf_req_send(fsf_req);
+	write_unlock_irqrestore(&adapter->request_queue.queue_lock,
 				lock_flags);
+	if (retval)
+		ZFCP_LOG_INFO("error: Could not send exchange configuration "
+			      "data command on the adapter %s\n",
+			      zfcp_get_busid_by_adapter(adapter));
+	else
+		wait_event(fsf_req->completion_wq,
+			   fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
+
+	zfcp_fsf_req_free(fsf_req);
+
 	return retval;
 }
 
@@ -2016,11 +2067,17 @@ zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok)
 	adapter->peer_d_id = 0;
 
 	if (xchg_ok) {
+
+		if (fsf_req->data)
+			memcpy((struct fsf_qtcb_bottom_config *) fsf_req->data,
+				bottom, sizeof (struct fsf_qtcb_bottom_config));
+
 		fc_host_node_name(shost) = bottom->nport_serv_param.wwnn;
 		fc_host_port_name(shost) = bottom->nport_serv_param.wwpn;
 		fc_host_port_id(shost) = bottom->s_id & ZFCP_DID_MASK;
 		fc_host_speed(shost) = bottom->fc_link_speed;
-		fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3;
+		fc_host_supported_classes(shost) =
+				FC_COS_CLASS2 | FC_COS_CLASS3;
 		adapter->hydra_version = bottom->adapter_type;
 		if (fc_host_permanent_port_name(shost) == -1)
 			fc_host_permanent_port_name(shost) =
@@ -2053,7 +2110,8 @@ zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok)
 		       min(FC_SERIAL_NUMBER_SIZE, 17));
 	}
 
-	ZFCP_LOG_NORMAL("The adapter %s reported the following characteristics:\n"
+	ZFCP_LOG_NORMAL("The adapter %s reported the following "
+			"characteristics:\n"
 			"WWNN 0x%016Lx, "
 			"WWPN 0x%016Lx, "
 			"S_ID 0x%06x,\n"
@@ -2090,7 +2148,7 @@ zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok)
 	return 0;
 }
 
-/*
+/**
  * function:    zfcp_fsf_exchange_config_data_handler
  *
  * purpose:     is called for finished Exchange Configuration Data command
@@ -2125,7 +2183,7 @@ zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req)
 					adapter->peer_wwpn,
 					adapter->peer_d_id);
 			debug_text_event(fsf_req->adapter->erp_dbf, 0,
-					 "top-p-to-p");
+					"top-p-to-p");
 			break;
 		case FC_PORTTYPE_NLPORT:
 			ZFCP_LOG_NORMAL("error: Arbitrated loop fibrechannel "
@@ -2138,8 +2196,8 @@ zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req)
 			return -EIO;
 		case FC_PORTTYPE_NPORT:
 			ZFCP_LOG_NORMAL("Switched fabric fibrechannel "
-				      "network detected at adapter %s.\n",
-				      zfcp_get_busid_by_adapter(adapter));
+					"network detected at adapter %s.\n",
+					zfcp_get_busid_by_adapter(adapter));
 			break;
 		default:
 			ZFCP_LOG_NORMAL("bug: The fibrechannel topology "
@@ -2179,7 +2237,8 @@ zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req)
 		if (zfcp_fsf_exchange_config_evaluate(fsf_req, 0))
 			return -EIO;
 
-		atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK, &adapter->status);
+		atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK,
+				&adapter->status);
 
 		zfcp_fsf_link_down_info_eval(adapter,
 			&qtcb->header.fsf_status_qual.link_down_info);
@@ -2187,7 +2246,7 @@ zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req)
 	default:
 		debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf-stat-ng");
 		debug_event(fsf_req->adapter->erp_dbf, 0,
-			    &fsf_req->qtcb->header.fsf_status, sizeof (u32));
+			    &fsf_req->qtcb->header.fsf_status, sizeof(u32));
 		zfcp_erp_adapter_shutdown(adapter, 0);
 		return -EIO;
 	}
@@ -2197,74 +2256,118 @@ zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req)
 /**
  * zfcp_fsf_exchange_port_data - request information about local port
  * @erp_action: ERP action for the adapter for which port data is requested
- * @adapter: for which port data is requested
- * @data: response to exchange port data request
  */
 int
-zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action,
-			    struct zfcp_adapter *adapter,
-			    struct fsf_qtcb_bottom_port *data)
+zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action)
 {
 	volatile struct qdio_buffer_element *sbale;
-        struct zfcp_fsf_req *fsf_req;
+	struct zfcp_fsf_req *fsf_req;
+	struct zfcp_adapter *adapter = erp_action->adapter;
 	unsigned long lock_flags;
-	int retval = 0;
+	int retval;
 
 	if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT)) {
 		ZFCP_LOG_INFO("error: exchange port data "
-                              "command not supported by adapter %s\n",
+			      "command not supported by adapter %s\n",
 			      zfcp_get_busid_by_adapter(adapter));
-                return -EOPNOTSUPP;
-        }
+		return -EOPNOTSUPP;
+	}
 
 	/* setup new FSF request */
 	retval = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
-				     erp_action ? ZFCP_REQ_AUTO_CLEANUP : 0,
-				     NULL, &lock_flags, &fsf_req);
-	if (retval < 0) {
+				     ZFCP_REQ_AUTO_CLEANUP,
+				     adapter->pool.fsf_req_erp,
+				     &lock_flags, &fsf_req);
+	if (retval) {
 		ZFCP_LOG_INFO("error: Out of resources. Could not create an "
-                              "exchange port data request for"
-                              "the adapter %s.\n",
+			      "exchange port data request for"
+			      "the adapter %s.\n",
 			      zfcp_get_busid_by_adapter(adapter));
 		write_unlock_irqrestore(&adapter->request_queue.queue_lock,
 					lock_flags);
 		return retval;
 	}
 
-	if (data)
-		fsf_req->data = (unsigned long) data;
-
 	sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
-        sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
-        sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
+	sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
+	sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
 
-	if (erp_action) {
-		erp_action->fsf_req = fsf_req;
-		fsf_req->erp_action = erp_action;
-		zfcp_erp_start_timer(fsf_req);
-	} else
-		zfcp_fsf_start_timer(fsf_req, ZFCP_FSF_REQUEST_TIMEOUT);
+	erp_action->fsf_req = fsf_req;
+	fsf_req->erp_action = erp_action;
+	zfcp_erp_start_timer(fsf_req);
 
 	retval = zfcp_fsf_req_send(fsf_req);
+	write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags);
+
 	if (retval) {
 		ZFCP_LOG_INFO("error: Could not send an exchange port data "
-                              "command on the adapter %s\n",
+			      "command on the adapter %s\n",
 			      zfcp_get_busid_by_adapter(adapter));
 		zfcp_fsf_req_free(fsf_req);
-		if (erp_action)
-			erp_action->fsf_req = NULL;
+		erp_action->fsf_req = NULL;
+	}
+	else
+		ZFCP_LOG_DEBUG("exchange port data request initiated "
+			       "(adapter %s)\n",
+			       zfcp_get_busid_by_adapter(adapter));
+	return retval;
+}
+
+
+/**
+ * zfcp_fsf_exchange_port_data_sync - request information about local port
+ * and wait until information is ready
+ */
+int
+zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
+				struct fsf_qtcb_bottom_port *data)
+{
+	volatile struct qdio_buffer_element *sbale;
+	struct zfcp_fsf_req *fsf_req;
+	unsigned long lock_flags;
+	int retval;
+
+	if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT)) {
+		ZFCP_LOG_INFO("error: exchange port data "
+			      "command not supported by adapter %s\n",
+			      zfcp_get_busid_by_adapter(adapter));
+		return -EOPNOTSUPP;
+	}
+
+	/* setup new FSF request */
+	retval = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
+				0, NULL, &lock_flags, &fsf_req);
+	if (retval) {
+		ZFCP_LOG_INFO("error: Out of resources. Could not create an "
+			      "exchange port data request for"
+			      "the adapter %s.\n",
+			      zfcp_get_busid_by_adapter(adapter));
 		write_unlock_irqrestore(&adapter->request_queue.queue_lock,
 					lock_flags);
 		return retval;
 	}
 
+	if (data)
+		fsf_req->data = (unsigned long) data;
+
+	sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
+	sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
+	sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
+
+	zfcp_fsf_start_timer(fsf_req, ZFCP_FSF_REQUEST_TIMEOUT);
+	retval = zfcp_fsf_req_send(fsf_req);
 	write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags);
 
-	if (!erp_action) {
+	if (retval)
+		ZFCP_LOG_INFO("error: Could not send an exchange port data "
+			      "command on the adapter %s\n",
+			      zfcp_get_busid_by_adapter(adapter));
+	else
 		wait_event(fsf_req->completion_wq,
 			   fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
-		zfcp_fsf_req_free(fsf_req);
-	}
+
+	zfcp_fsf_req_free(fsf_req);
+
 	return retval;
 }
 
@@ -2277,18 +2380,16 @@ static void
 zfcp_fsf_exchange_port_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok)
 {
 	struct zfcp_adapter *adapter;
-	struct fsf_qtcb *qtcb;
-	struct fsf_qtcb_bottom_port *bottom, *data;
+	struct fsf_qtcb_bottom_port *bottom;
 	struct Scsi_Host *shost;
 
 	adapter = fsf_req->adapter;
-	qtcb = fsf_req->qtcb;
-	bottom = &qtcb->bottom.port;
+	bottom = &fsf_req->qtcb->bottom.port;
 	shost = adapter->scsi_host;
 
-	data = (struct fsf_qtcb_bottom_port*) fsf_req->data;
-	if (data)
-		memcpy(data, bottom, sizeof(struct fsf_qtcb_bottom_port));
+	if (fsf_req->data)
+		memcpy((struct fsf_qtcb_bottom_port*) fsf_req->data, bottom,
+			sizeof(struct fsf_qtcb_bottom_port));
 
 	if (adapter->connection_features & FSF_FEATURE_NPIV_MODE)
 		fc_host_permanent_port_name(shost) = bottom->wwpn;
@@ -2336,10 +2437,10 @@ zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *fsf_req)
 /*
  * function:    zfcp_fsf_open_port
  *
- * purpose:	
+ * purpose:
  *
  * returns:	address of initiated FSF request
- *		NULL - request could not be initiated 
+ *		NULL - request could not be initiated
  */
 int
 zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
@@ -2400,7 +2501,7 @@ zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
  *
  * purpose:	is called for finished Open Port command
  *
- * returns:	
+ * returns:
  */
 static int
 zfcp_fsf_open_port_handler(struct zfcp_fsf_req *fsf_req)
@@ -3002,7 +3103,7 @@ zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action)
  *
  * purpose:	is called for finished Open LUN command
  *
- * returns:	
+ * returns:
  */
 static int
 zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *fsf_req)
@@ -3265,7 +3366,7 @@ zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *fsf_req)
  * purpose:
  *
  * returns:	address of fsf_req - request successfully initiated
- *		NULL - 
+ *		NULL -
  *
  * assumptions: This routine does not check whether the associated
  *              remote port/lun has already been opened. This should be
@@ -3586,17 +3687,17 @@ zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter,
 			ZFCP_LOG_DEBUG(
 				"Data did not fit into available buffer(s), "
 			       "waiting for more...\n");
-		retval = -EIO;
-	} else {
-		ZFCP_LOG_NORMAL("error: No truncation implemented but "
-				"required. Shutting down unit "
-				"(adapter %s, port 0x%016Lx, "
-				"unit 0x%016Lx)\n",
-				zfcp_get_busid_by_unit(unit),
-				unit->port->wwpn,
-				unit->fcp_lun);
-		zfcp_erp_unit_shutdown(unit, 0);
-		retval = -EINVAL;
+			retval = -EIO;
+		} else {
+			ZFCP_LOG_NORMAL("error: No truncation implemented but "
+					"required. Shutting down unit "
+					"(adapter %s, port 0x%016Lx, "
+					"unit 0x%016Lx)\n",
+					zfcp_get_busid_by_unit(unit),
+					unit->port->wwpn,
+					unit->fcp_lun);
+			zfcp_erp_unit_shutdown(unit, 0);
+			retval = -EINVAL;
 		}
 		goto no_fit;
 	}
@@ -3727,7 +3828,7 @@ zfcp_fsf_send_fcp_command_task_management(struct zfcp_adapter *adapter,
  *
  * purpose:	is called for finished Send FCP Command
  *
- * returns:	
+ * returns:
  */
 static int
 zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *fsf_req)
@@ -3964,7 +4065,7 @@ zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *fsf_req)
  *
  * purpose:	evaluates FCP_RSP IU
  *
- * returns:	
+ * returns:
  */
 static int
 zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req)
@@ -4192,7 +4293,7 @@ zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req)
  *
  * purpose:	evaluates FCP_RSP IU
  *
- * returns:	
+ * returns:
  */
 static int
 zfcp_fsf_send_fcp_command_task_management_handler(struct zfcp_fsf_req *fsf_req)
@@ -4635,7 +4736,7 @@ zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags,
 	INIT_LIST_HEAD(&fsf_req->list);
 	init_timer(&fsf_req->timer);
 
-	/* initialize waitqueue which may be used to wait on 
+	/* initialize waitqueue which may be used to wait on
 	   this request completion */
 	init_waitqueue_head(&fsf_req->completion_wq);
 
diff --git a/drivers/s390/scsi/zfcp_fsf.h b/drivers/s390/scsi/zfcp_fsf.h
index 71186618947c..8cce5cc11d50 100644
--- a/drivers/s390/scsi/zfcp_fsf.h
+++ b/drivers/s390/scsi/zfcp_fsf.h
@@ -1,22 +1,22 @@
-/* 
+/*
  * This file is part of the zfcp device driver for
  * FCP adapters for IBM System z9 and zSeries.
  *
  * (C) Copyright IBM Corp. 2002, 2006
- * 
- * This program is free software; you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation; either version 2, or (at your option) 
- * any later version. 
- * 
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- * 
- * You should have received a copy of the GNU General Public License 
- * along with this program; if not, write to the Free Software 
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef FSF_H
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index c6899efdc8f6..3f105fdcf239 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -174,10 +174,9 @@ zfcp_qdio_handler_error_check(struct zfcp_adapter *adapter, unsigned int status,
                 * That is why we need to clear the link-down flag
                 * which is set again in case we have missed by a mile.
                 */
-               zfcp_erp_adapter_reopen(
-                       adapter, 
-                       ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED |
-                       ZFCP_STATUS_COMMON_ERP_FAILED);
+		zfcp_erp_adapter_reopen(adapter,
+				       ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED |
+				       ZFCP_STATUS_COMMON_ERP_FAILED);
 	}
 	return retval;
 }
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index ad7eb4a9261c..abae2027f7e5 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -1,22 +1,22 @@
-/* 
+/*
  * This file is part of the zfcp device driver for
  * FCP adapters for IBM System z9 and zSeries.
  *
  * (C) Copyright IBM Corp. 2002, 2006
- * 
- * This program is free software; you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation; either version 2, or (at your option) 
- * any later version. 
- * 
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- * 
- * You should have received a copy of the GNU General Public License 
- * along with this program; if not, write to the Free Software 
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #define ZFCP_LOG_AREA			ZFCP_LOG_AREA_SCSI
@@ -101,7 +101,7 @@ zfcp_get_fcp_dl_ptr(struct fcp_cmnd_iu * fcp_cmd)
 		((unsigned char *) fcp_cmd +
 		 sizeof (struct fcp_cmnd_iu) + additional_length);
 	/*
-	 * fcp_dl_addr = start address of fcp_cmnd structure + 
+	 * fcp_dl_addr = start address of fcp_cmnd structure +
 	 * size of fixed part + size of dynamically sized add_dcp_cdb field
 	 * SEE FCP-2 documentation
 	 */
@@ -189,13 +189,12 @@ static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt)
 		unit->device = NULL;
 		zfcp_erp_unit_failed(unit);
 		zfcp_unit_put(unit);
-	} else {
+	} else
 		ZFCP_LOG_NORMAL("bug: no unit associated with SCSI device at "
 				"address %p\n", sdpnt);
-	}
 }
 
-/* 
+/*
  * called from scsi midlayer to allow finetuning of a device.
  */
 static int
@@ -361,12 +360,11 @@ zfcp_unit_lookup(struct zfcp_adapter *adapter, int channel, unsigned int id,
 	list_for_each_entry(port, &adapter->port_list_head, list) {
 		if (!port->rport || (id != port->rport->scsi_target_id))
 			continue;
-		list_for_each_entry(unit, &port->unit_list_head, list) {
+		list_for_each_entry(unit, &port->unit_list_head, list)
 			if (lun == unit->scsi_lun) {
 				retval = unit;
 				goto out;
 			}
-		}
 	}
  out:
 	return retval;
@@ -374,7 +372,7 @@ zfcp_unit_lookup(struct zfcp_adapter *adapter, int channel, unsigned int id,
 
 /**
  * zfcp_scsi_eh_abort_handler - abort the specified SCSI command
- * @scpnt: pointer to scsi_cmnd to be aborted 
+ * @scpnt: pointer to scsi_cmnd to be aborted
  * Return: SUCCESS - command has been aborted and cleaned up in internal
  *          bookkeeping, SCSI stack won't be called for aborted command
  *         FAILED - otherwise
@@ -733,7 +731,7 @@ zfcp_get_fc_host_stats(struct Scsi_Host *shost)
 	if (!data)
 		return NULL;
 
-	ret = zfcp_fsf_exchange_port_data(NULL, adapter, data);
+	ret = zfcp_fsf_exchange_port_data_sync(adapter, data);
 	if (ret) {
 		kfree(data);
 		return NULL; /* XXX return zeroed fc_stats? */
@@ -763,7 +761,7 @@ zfcp_reset_fc_host_stats(struct Scsi_Host *shost)
 	if (!data)
 		return;
 
-	ret = zfcp_fsf_exchange_port_data(NULL, adapter, data);
+	ret = zfcp_fsf_exchange_port_data_sync(adapter, data);
 	if (ret) {
 		kfree(data);
 	} else {
@@ -802,6 +800,7 @@ struct fc_function_template zfcp_transport_functions = {
 	.show_host_port_type = 1,
 	.show_host_speed = 1,
 	.show_host_port_id = 1,
+	.disable_target_scan = 1,
 };
 
 /**
diff --git a/drivers/s390/scsi/zfcp_sysfs_unit.c b/drivers/s390/scsi/zfcp_sysfs_unit.c
index 81a484175863..63f75ee95c33 100644
--- a/drivers/s390/scsi/zfcp_sysfs_unit.c
+++ b/drivers/s390/scsi/zfcp_sysfs_unit.c
@@ -139,7 +139,7 @@ static struct attribute_group zfcp_unit_attr_group = {
 	.attrs = zfcp_unit_attrs,
 };
 
-/** 
+/**
  * zfcp_sysfs_create_unit_files - create sysfs unit files
  * @dev: pointer to belonging device
  *
@@ -151,7 +151,7 @@ zfcp_sysfs_unit_create_files(struct device *dev)
 	return sysfs_create_group(&dev->kobj, &zfcp_unit_attr_group);
 }
 
-/** 
+/**
  * zfcp_sysfs_remove_unit_files - remove sysfs unit files
  * @dev: pointer to belonging device
  *