[SCSI] aacraid: add Voodoo Lite class of cards.

The cards being added are supported in a limited sense already through
family matching, but we needed to add some functionality to the driver
to expose selectively the physical drives. These Physical drives are
specifically marked to not be part of any array and thus are declared
JBODs (Just a Bunch Of Drives) for generic SCSI access.

We report that this is the second patch in a set of two, but merely
depends on the stand-alone functionality of the first patch which adds
in that case the ability to report a driver feature flag via sysfs. We
leverage that functionality by reporting that this driver now supports
this new JBOD feature for the controller so that the array management
applications may react accordingly and guide the user as they manage
the controller.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 11 insertions, 4 deletions

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 5ab733d4faf4..61be22774e99 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -404,6 +404,7 @@ static int aac_slave_configure(struct scsi_device *sdev)
 	struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
 	if ((sdev->type == TYPE_DISK) &&
 			(sdev_channel(sdev) != CONTAINER_CHANNEL) &&
+			(!aac->jbod || sdev->inq_periph_qual) &&
 			(!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))) {
 		if (expose_physicals == 0)
 			return -ENXIO;
@@ -411,7 +412,8 @@ static int aac_slave_configure(struct scsi_device *sdev)
 			sdev->no_uld_attach = 1;
 	}
 	if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
-			(sdev_channel(sdev) == CONTAINER_CHANNEL)) {
+			(!aac->raid_scsi_mode || (sdev_channel(sdev) != 2)) &&
+			!sdev->no_uld_attach) {
 		struct scsi_device * dev;
 		struct Scsi_Host *host = sdev->host;
 		unsigned num_lsu = 0;
@@ -430,8 +432,11 @@ static int aac_slave_configure(struct scsi_device *sdev)
 				++num_lsu;
 		__shost_for_each_device(dev, host) {
 			if (dev->tagged_supported && (dev->type == TYPE_DISK) &&
-				(sdev_channel(dev) == CONTAINER_CHANNEL)) {
-				if (!aac->fsa_dev[sdev_id(dev)].valid)
+					(!aac->raid_scsi_mode ||
+						(sdev_channel(sdev) != 2)) &&
+					!dev->no_uld_attach) {
+				if ((sdev_channel(dev) != CONTAINER_CHANNEL)
+				 || !aac->fsa_dev[sdev_id(dev)].valid)
 					++num_lsu;
 			} else
 				++num_one;
@@ -804,6 +809,8 @@ static ssize_t aac_show_flags(struct class_device *class_dev, char *buf)
 	if (dev->raw_io_interface && dev->raw_io_64)
 		len += snprintf(buf + len, PAGE_SIZE - len,
 				"SAI_READ_CAPACITY_16\n");
+	if (dev->jbod)
+		len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n");
 	return len;
 }
 
@@ -1157,7 +1164,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 	 * all containers are on the virtual channel 0 (CONTAINER_CHANNEL)
 	 * physical channels are address by their actual physical number+1
 	 */
-	if ((aac->nondasd_support == 1) || expose_physicals)
+	if (aac->nondasd_support || expose_physicals || aac->jbod)
 		shost->max_channel = aac->maximum_num_channels;
 	else
 		shost->max_channel = 0;