[SCSI] libsas: fix error handling

The libsas error handler has two fairly fatal bugs

1. scsi_sas_task_done calls scsi_eh_finish_cmd() too early.  This
   happens if the task completes after it has been aborted but before
   the error handler starts up.  Because scsi_eh_finish_cmd()
   decrements host_failed and adds the task to the done list, the
   error handler start check (host_failed == host_busy) never passes
   and the eh never starts.

2. The multiple task completion paths sas_scsi_clear_queue_... all
   simply delete the task from the error queue.  This causes it to
   disappear into the ether, since a command must be placed on the
   done queue to be finished off by the error handler.  This behaviour
   causes the HBA to hang on pending commands.

Fix 1. by moving the SAS_TASK_STATE_ABORTED check to an exit clause at
the top of the routine and calling ->scsi_done() unconditionally (it
is a nop if the timer has fired).  This keeps the task in the error
handling queue until the eh starts.

Fix 2. by making sure every task goes through task complete followed
by scsi_eh_finish_cmd().

Tested this by firing resets across a disk running a hammer test (now
it actually survives without hanging the system)

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 41 insertions, 24 deletions

diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index f869fba86807..9c96d1bd36e2 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -51,10 +51,14 @@ static void sas_scsi_task_done(struct sas_task *task)
 {
 	struct task_status_struct *ts = &task->task_status;
 	struct scsi_cmnd *sc = task->uldd_task;
-	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(sc->device->host);
-	unsigned ts_flags = task->task_state_flags;
 	int hs = 0, stat = 0;
 
+	if (unlikely(task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+		/* Aborted tasks will be completed by the error handler */
+		SAS_DPRINTK("task done but aborted\n");
+		return;
+	}
+
 	if (unlikely(!sc)) {
 		SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
 		list_del_init(&task->list);
@@ -120,11 +124,7 @@ static void sas_scsi_task_done(struct sas_task *task)
 	sc->result = (hs << 16) | stat;
 	list_del_init(&task->list);
 	sas_free_task(task);
-	/* This is very ugly but this is how SCSI Core works. */
-	if (ts_flags & SAS_TASK_STATE_ABORTED)
-		scsi_eh_finish_cmd(sc, &sas_ha->eh_done_q);
-	else
-		sc->scsi_done(sc);
+	sc->scsi_done(sc);
 }
 
 static enum task_attribute sas_scsi_get_task_attr(struct scsi_cmnd *cmd)
@@ -255,13 +255,33 @@ out:
 	return res;
 }
 
+static void sas_eh_finish_cmd(struct scsi_cmnd *cmd)
+{
+	struct sas_task *task = TO_SAS_TASK(cmd);
+	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(cmd->device->host);
+
+	/* remove the aborted task flag to allow the task to be
+	 * completed now. At this point, we only get called following
+	 * an actual abort of the task, so we should be guaranteed not
+	 * to be racing with any completions from the LLD (hence we
+	 * don't need the task state lock to clear the flag) */
+	task->task_state_flags &= ~SAS_TASK_STATE_ABORTED;
+	/* Now call task_done.  However, task will be free'd after
+	 * this */
+	task->task_done(task);
+	/* now finish the command and move it on to the error
+	 * handler done list, this also takes it off the
+	 * error handler pending list */
+	scsi_eh_finish_cmd(cmd, &sas_ha->eh_done_q);
+}
+
 static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd)
 {
 	struct scsi_cmnd *cmd, *n;
 
 	list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
 		if (cmd == my_cmd)
-			list_del_init(&cmd->eh_entry);
+			sas_eh_finish_cmd(cmd);
 	}
 }
 
@@ -274,7 +294,7 @@ static void sas_scsi_clear_queue_I_T(struct list_head *error_q,
 		struct domain_device *x = cmd_to_domain_dev(cmd);
 
 		if (x == dev)
-			list_del_init(&cmd->eh_entry);
+			sas_eh_finish_cmd(cmd);
 	}
 }
 
@@ -288,7 +308,7 @@ static void sas_scsi_clear_queue_port(struct list_head *error_q,
 		struct asd_sas_port *x = dev->port;
 
 		if (x == port)
-			list_del_init(&cmd->eh_entry);
+			sas_eh_finish_cmd(cmd);
 	}
 }
 
@@ -528,14 +548,14 @@ Again:
 		case TASK_IS_DONE:
 			SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
 				    task);
-			task->task_done(task);
+			sas_eh_finish_cmd(cmd);
 			if (need_reset)
 				try_to_reset_cmd_device(shost, cmd);
 			continue;
 		case TASK_IS_ABORTED:
 			SAS_DPRINTK("%s: task 0x%p is aborted\n",
 				    __FUNCTION__, task);
-			task->task_done(task);
+			sas_eh_finish_cmd(cmd);
 			if (need_reset)
 				try_to_reset_cmd_device(shost, cmd);
 			continue;
@@ -547,7 +567,7 @@ Again:
 					    "recovered\n",
 					    SAS_ADDR(task->dev),
 					    cmd->device->lun);
-				task->task_done(task);
+				sas_eh_finish_cmd(cmd);
 				if (need_reset)
 					try_to_reset_cmd_device(shost, cmd);
 				sas_scsi_clear_queue_lu(work_q, cmd);
@@ -562,7 +582,7 @@ Again:
 			if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
 				SAS_DPRINTK("I_T %016llx recovered\n",
 					    SAS_ADDR(task->dev->sas_addr));
-				task->task_done(task);
+				sas_eh_finish_cmd(cmd);
 				if (need_reset)
 					try_to_reset_cmd_device(shost, cmd);
 				sas_scsi_clear_queue_I_T(work_q, task->dev);
@@ -577,7 +597,7 @@ Again:
 				if (res == TMF_RESP_FUNC_COMPLETE) {
 					SAS_DPRINTK("clear nexus port:%d "
 						    "succeeded\n", port->id);
-					task->task_done(task);
+					sas_eh_finish_cmd(cmd);
 					if (need_reset)
 						try_to_reset_cmd_device(shost, cmd);
 					sas_scsi_clear_queue_port(work_q,
@@ -591,10 +611,10 @@ Again:
 				if (res == TMF_RESP_FUNC_COMPLETE) {
 					SAS_DPRINTK("clear nexus ha "
 						    "succeeded\n");
-					task->task_done(task);
+					sas_eh_finish_cmd(cmd);
 					if (need_reset)
 						try_to_reset_cmd_device(shost, cmd);
-					goto out;
+					goto clear_q;
 				}
 			}
 			/* If we are here -- this means that no amount
@@ -606,21 +626,18 @@ Again:
 				    SAS_ADDR(task->dev->sas_addr),
 				    cmd->device->lun);
 
-			task->task_done(task);
+			sas_eh_finish_cmd(cmd);
 			if (need_reset)
 				try_to_reset_cmd_device(shost, cmd);
 			goto clear_q;
 		}
 	}
-out:
 	return list_empty(work_q);
 clear_q:
 	SAS_DPRINTK("--- Exit %s -- clear_q\n", __FUNCTION__);
-	list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
-		struct sas_task *task = TO_SAS_TASK(cmd);
-		list_del_init(&cmd->eh_entry);
-		task->task_done(task);
-	}
+	list_for_each_entry_safe(cmd, n, work_q, eh_entry)
+		sas_eh_finish_cmd(cmd);
+
 	return list_empty(work_q);
 }