Merge commit 'v3.4-rc4' into next

19 files changed, 1752 insertions, 394 deletions

diff --git a/drivers/scsi/lpfc/Makefile b/drivers/scsi/lpfc/Makefile
index 88928f00aa2d..fe5d396aca73 100644
--- a/drivers/scsi/lpfc/Makefile
+++ b/drivers/scsi/lpfc/Makefile
@@ -1,7 +1,7 @@
 #/*******************************************************************
 # * This file is part of the Emulex Linux Device Driver for         *
 # * Fibre Channel Host Bus Adapters.                                *
-# * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
+# * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
 # * EMULEX and SLI are trademarks of Emulex.                        *
 # * www.emulex.com                                                  *
 # *                                                                 *
@@ -22,6 +22,8 @@
 ccflags-$(GCOV) := -fprofile-arcs -ftest-coverage
 ccflags-$(GCOV) += -O0
 
+ccflags-y += -Werror
+
 obj-$(CONFIG_SCSI_LPFC) := lpfc.o
 
 lpfc-objs := lpfc_mem.o lpfc_sli.o lpfc_ct.o lpfc_els.o lpfc_hbadisc.o	\
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 825f9307417a..3a1ffdd6d831 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -534,6 +534,7 @@ struct lpfc_hba {
 	void (*lpfc_scsi_prep_cmnd)
 		(struct lpfc_vport *, struct lpfc_scsi_buf *,
 		 struct lpfc_nodelist *);
+
 	/* IOCB interface function jump table entries */
 	int (*__lpfc_sli_issue_iocb)
 		(struct lpfc_hba *, uint32_t,
@@ -541,8 +542,6 @@ struct lpfc_hba {
 	void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
 			 struct lpfc_iocbq *);
 	int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
-
-
 	IOCB_t * (*lpfc_get_iocb_from_iocbq)
 		(struct lpfc_iocbq *);
 	void (*lpfc_scsi_cmd_iocb_cmpl)
@@ -551,10 +550,12 @@ struct lpfc_hba {
 	/* MBOX interface function jump table entries */
 	int (*lpfc_sli_issue_mbox)
 		(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
+
 	/* Slow-path IOCB process function jump table entries */
 	void (*lpfc_sli_handle_slow_ring_event)
 		(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 		 uint32_t mask);
+
 	/* INIT device interface function jump table entries */
 	int (*lpfc_sli_hbq_to_firmware)
 		(struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
@@ -573,6 +574,10 @@ struct lpfc_hba {
 	int (*lpfc_selective_reset)
 		(struct lpfc_hba *);
 
+	int (*lpfc_bg_scsi_prep_dma_buf)
+		(struct lpfc_hba *, struct lpfc_scsi_buf *);
+	/* Add new entries here */
+
 	/* SLI4 specific HBA data structure */
 	struct lpfc_sli4_hba sli4_hba;
 
@@ -835,9 +840,12 @@ struct lpfc_hba {
 	struct dentry *debug_dumpData;   /* BlockGuard BPL */
 	struct dentry *debug_dumpDif;    /* BlockGuard BPL */
 	struct dentry *debug_InjErrLBA;  /* LBA to inject errors at */
+	struct dentry *debug_InjErrNPortID;  /* NPortID to inject errors at */
+	struct dentry *debug_InjErrWWPN;  /* WWPN to inject errors at */
 	struct dentry *debug_writeGuard; /* inject write guard_tag errors */
 	struct dentry *debug_writeApp;   /* inject write app_tag errors */
 	struct dentry *debug_writeRef;   /* inject write ref_tag errors */
+	struct dentry *debug_readGuard;  /* inject read guard_tag errors */
 	struct dentry *debug_readApp;    /* inject read app_tag errors */
 	struct dentry *debug_readRef;    /* inject read ref_tag errors */
 
@@ -845,10 +853,13 @@ struct lpfc_hba {
 	uint32_t lpfc_injerr_wgrd_cnt;
 	uint32_t lpfc_injerr_wapp_cnt;
 	uint32_t lpfc_injerr_wref_cnt;
+	uint32_t lpfc_injerr_rgrd_cnt;
 	uint32_t lpfc_injerr_rapp_cnt;
 	uint32_t lpfc_injerr_rref_cnt;
+	uint32_t lpfc_injerr_nportid;
+	struct lpfc_name lpfc_injerr_wwpn;
 	sector_t lpfc_injerr_lba;
-#define LPFC_INJERR_LBA_OFF	(sector_t)0xffffffffffffffff
+#define LPFC_INJERR_LBA_OFF	(sector_t)(-1)
 
 	struct dentry *debug_slow_ring_trc;
 	struct lpfc_debugfs_trc *slow_ring_trc;
@@ -901,6 +912,8 @@ struct lpfc_hba {
 	atomic_t fast_event_count;
 	uint32_t fcoe_eventtag;
 	uint32_t fcoe_eventtag_at_fcf_scan;
+	uint32_t fcoe_cvl_eventtag;
+	uint32_t fcoe_cvl_eventtag_attn;
 	struct lpfc_fcf fcf;
 	uint8_t fc_map[3];
 	uint8_t valid_vlan;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index f6697cb0e216..5eb2bc116183 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -353,7 +353,7 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr,
 	struct lpfc_hba   *phba = vport->phba;
 	uint32_t if_type;
 	uint8_t sli_family;
-	char fwrev[32];
+	char fwrev[FW_REV_STR_SIZE];
 	int len;
 
 	lpfc_decode_firmware_rev(phba, fwrev, 1);
@@ -922,11 +922,15 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
 	rc = lpfc_sli4_pdev_status_reg_wait(phba);
 
 	if (rc == -EPERM) {
-		/* no privilage for reset, restore if needed */
-		if (before_fc_flag & FC_OFFLINE_MODE)
-			goto out;
+		/* no privilage for reset */
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"3150 No privilage to perform the requested "
+				"access: x%x\n", reg_val);
 	} else if (rc == -EIO) {
 		/* reset failed, there is nothing more we can do */
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"3153 Fail to perform the requested "
+				"access: x%x\n", reg_val);
 		return rc;
 	}
 
@@ -2571,7 +2575,7 @@ LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff,
 # lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters
 # objects that have been registered with the nameserver after login.
 */
-LPFC_VPORT_ATTR_R(enable_da_id, 0, 0, 1,
+LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1,
 		  "Deregister nameserver objects before LOGO");
 
 /*
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 56a86baece5b..141e4b40bb55 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -589,7 +589,10 @@ lpfc_bsg_rport_els(struct fc_bsg_job *job)
 	}
 	cmdiocbq->iocb.un.elsreq64.bdl.bdeSize =
 		(request_nseg + reply_nseg) * sizeof(struct ulp_bde64);
-	cmdiocbq->iocb.ulpContext = rpi;
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		cmdiocbq->iocb.ulpContext = phba->sli4_hba.rpi_ids[rpi];
+	else
+		cmdiocbq->iocb.ulpContext = rpi;
 	cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC;
 	cmdiocbq->context1 = NULL;
 	cmdiocbq->context2 = NULL;
@@ -1768,7 +1771,7 @@ lpfc_sli4_bsg_set_internal_loopback(struct lpfc_hba *phba)
 	bf_set(lpfc_mbx_set_diag_state_link_type,
 	       &link_diag_loopback->u.req, phba->sli4_hba.lnk_info.lnk_tp);
 	bf_set(lpfc_mbx_set_diag_lpbk_type, &link_diag_loopback->u.req,
-	       LPFC_DIAG_LOOPBACK_TYPE_SERDES);
+	       LPFC_DIAG_LOOPBACK_TYPE_INTERNAL);
 
 	mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO);
 	if ((mbxstatus != MBX_SUCCESS) || (pmboxq->u.mb.mbxStatus)) {
@@ -3977,7 +3980,7 @@ lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 			case COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES:
 				lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
 						"3106 Handled SLI_CONFIG "
-						"subsys_fcoe, opcode:x%x\n",
+						"subsys_comn, opcode:x%x\n",
 						opcode);
 				rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job,
 							nemb_mse, dmabuf);
@@ -3985,7 +3988,7 @@ lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 			default:
 				lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
 						"3107 Reject SLI_CONFIG "
-						"subsys_fcoe, opcode:x%x\n",
+						"subsys_comn, opcode:x%x\n",
 						opcode);
 				rc = -EPERM;
 				break;
@@ -4556,7 +4559,12 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 							+ sizeof(MAILBOX_t));
 		}
 	} else if (phba->sli_rev == LPFC_SLI_REV4) {
-		if (pmb->mbxCommand == MBX_DUMP_MEMORY) {
+		/* Let type 4 (well known data) through because the data is
+		 * returned in varwords[4-8]
+		 * otherwise check the recieve length and fetch the buffer addr
+		 */
+		if ((pmb->mbxCommand == MBX_DUMP_MEMORY) &&
+			(pmb->un.varDmp.type != DMP_WELL_KNOWN)) {
 			/* rebuild the command for sli4 using our own buffers
 			* like we do for biu diags
 			*/
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 26924b7a6cde..330dd7192a7f 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -462,3 +462,4 @@ int lpfc_issue_unreg_vfi(struct lpfc_vport *);
 int lpfc_selective_reset(struct lpfc_hba *);
 int lpfc_sli4_read_config(struct lpfc_hba *phba);
 int lpfc_scsi_buf_update(struct lpfc_hba *phba);
+void lpfc_sli4_node_prep(struct lpfc_hba *phba);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 707081d0a226..93e96b3c9097 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1076,7 +1076,7 @@ int
 lpfc_vport_symbolic_node_name(struct lpfc_vport *vport, char *symbol,
 	size_t size)
 {
-	char fwrev[16];
+	char fwrev[FW_REV_STR_SIZE];
 	int n;
 
 	lpfc_decode_firmware_rev(vport->phba, fwrev, 0);
@@ -1834,7 +1834,7 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
 	uint8_t *fwname;
 
 	if (phba->sli_rev == LPFC_SLI_REV4)
-		sprintf(fwrevision, "%s", vp->rev.opFwName);
+		snprintf(fwrevision, FW_REV_STR_SIZE, "%s", vp->rev.opFwName);
 	else if (vp->rev.rBit) {
 		if (psli->sli_flag & LPFC_SLI_ACTIVE)
 			rev = vp->rev.sli2FwRev;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 3587a3fe8fcb..af04b0d6688d 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2007-2011 Emulex.  All rights reserved.           *
+ * Copyright (C) 2007-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -997,36 +997,41 @@ lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf,
 	return nbytes;
 }
 
-static int
-lpfc_debugfs_dif_err_open(struct inode *inode, struct file *file)
-{
-	file->private_data = inode->i_private;
-	return 0;
-}
-
 static ssize_t
 lpfc_debugfs_dif_err_read(struct file *file, char __user *buf,
 	size_t nbytes, loff_t *ppos)
 {
 	struct dentry *dent = file->f_dentry;
 	struct lpfc_hba *phba = file->private_data;
-	char cbuf[16];
+	char cbuf[32];
+	uint64_t tmp = 0;
 	int cnt = 0;
 
 	if (dent == phba->debug_writeGuard)
-		cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wgrd_cnt);
+		cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wgrd_cnt);
 	else if (dent == phba->debug_writeApp)
-		cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wapp_cnt);
+		cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wapp_cnt);
 	else if (dent == phba->debug_writeRef)
-		cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wref_cnt);
+		cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wref_cnt);
+	else if (dent == phba->debug_readGuard)
+		cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rgrd_cnt);
 	else if (dent == phba->debug_readApp)
-		cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rapp_cnt);
+		cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rapp_cnt);
 	else if (dent == phba->debug_readRef)
-		cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rref_cnt);
-	else if (dent == phba->debug_InjErrLBA)
-		cnt = snprintf(cbuf, 16, "0x%lx\n",
-				 (unsigned long) phba->lpfc_injerr_lba);
-	else
+		cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rref_cnt);
+	else if (dent == phba->debug_InjErrNPortID)
+		cnt = snprintf(cbuf, 32, "0x%06x\n", phba->lpfc_injerr_nportid);
+	else if (dent == phba->debug_InjErrWWPN) {
+		memcpy(&tmp, &phba->lpfc_injerr_wwpn, sizeof(struct lpfc_name));
+		tmp = cpu_to_be64(tmp);
+		cnt = snprintf(cbuf, 32, "0x%016llx\n", tmp);
+	} else if (dent == phba->debug_InjErrLBA) {
+		if (phba->lpfc_injerr_lba == (sector_t)(-1))
+			cnt = snprintf(cbuf, 32, "off\n");
+		else
+			cnt = snprintf(cbuf, 32, "0x%llx\n",
+				 (uint64_t) phba->lpfc_injerr_lba);
+	} else
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 			 "0547 Unknown debugfs error injection entry\n");
 
@@ -1040,7 +1045,7 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf,
 	struct dentry *dent = file->f_dentry;
 	struct lpfc_hba *phba = file->private_data;
 	char dstbuf[32];
-	unsigned long tmp;
+	uint64_t tmp = 0;
 	int size;
 
 	memset(dstbuf, 0, 32);
@@ -1048,7 +1053,12 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf,
 	if (copy_from_user(dstbuf, buf, size))
 		return 0;
 
-	if (strict_strtoul(dstbuf, 0, &tmp))
+	if (dent == phba->debug_InjErrLBA) {
+		if ((buf[0] == 'o') && (buf[1] == 'f') && (buf[2] == 'f'))
+			tmp = (uint64_t)(-1);
+	}
+
+	if ((tmp == 0) && (kstrtoull(dstbuf, 0, &tmp)))
 		return 0;
 
 	if (dent == phba->debug_writeGuard)
@@ -1057,13 +1067,20 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf,
 		phba->lpfc_injerr_wapp_cnt = (uint32_t)tmp;
 	else if (dent == phba->debug_writeRef)
 		phba->lpfc_injerr_wref_cnt = (uint32_t)tmp;
+	else if (dent == phba->debug_readGuard)
+		phba->lpfc_injerr_rgrd_cnt = (uint32_t)tmp;
 	else if (dent == phba->debug_readApp)
 		phba->lpfc_injerr_rapp_cnt = (uint32_t)tmp;
 	else if (dent == phba->debug_readRef)
 		phba->lpfc_injerr_rref_cnt = (uint32_t)tmp;
 	else if (dent == phba->debug_InjErrLBA)
 		phba->lpfc_injerr_lba = (sector_t)tmp;
-	else
+	else if (dent == phba->debug_InjErrNPortID)
+		phba->lpfc_injerr_nportid = (uint32_t)(tmp & Mask_DID);
+	else if (dent == phba->debug_InjErrWWPN) {
+		tmp = cpu_to_be64(tmp);
+		memcpy(&phba->lpfc_injerr_wwpn, &tmp, sizeof(struct lpfc_name));
+	} else
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 			 "0548 Unknown debugfs error injection entry\n");
 
@@ -3517,7 +3534,7 @@ static const struct file_operations lpfc_debugfs_op_dumpDif = {
 #undef lpfc_debugfs_op_dif_err
 static const struct file_operations lpfc_debugfs_op_dif_err = {
 	.owner =	THIS_MODULE,
-	.open =		lpfc_debugfs_dif_err_open,
+	.open =		simple_open,
 	.llseek =	lpfc_debugfs_lseek,
 	.read =		lpfc_debugfs_dif_err_read,
 	.write =	lpfc_debugfs_dif_err_write,
@@ -3945,6 +3962,28 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 		}
 		phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
 
+		snprintf(name, sizeof(name), "InjErrNPortID");
+		phba->debug_InjErrNPortID =
+			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+			phba->hba_debugfs_root,
+			phba, &lpfc_debugfs_op_dif_err);
+		if (!phba->debug_InjErrNPortID) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+				"0809 Cannot create debugfs InjErrNPortID\n");
+			goto debug_failed;
+		}
+
+		snprintf(name, sizeof(name), "InjErrWWPN");
+		phba->debug_InjErrWWPN =
+			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+			phba->hba_debugfs_root,
+			phba, &lpfc_debugfs_op_dif_err);
+		if (!phba->debug_InjErrWWPN) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+				"0810 Cannot create debugfs InjErrWWPN\n");
+			goto debug_failed;
+		}
+
 		snprintf(name, sizeof(name), "writeGuardInjErr");
 		phba->debug_writeGuard =
 			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
@@ -3978,6 +4017,17 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 			goto debug_failed;
 		}
 
+		snprintf(name, sizeof(name), "readGuardInjErr");
+		phba->debug_readGuard =
+			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+			phba->hba_debugfs_root,
+			phba, &lpfc_debugfs_op_dif_err);
+		if (!phba->debug_readGuard) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+				"0808 Cannot create debugfs readGuard\n");
+			goto debug_failed;
+		}
+
 		snprintf(name, sizeof(name), "readAppInjErr");
 		phba->debug_readApp =
 			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
@@ -4306,6 +4356,14 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport)
 			debugfs_remove(phba->debug_InjErrLBA); /* InjErrLBA */
 			phba->debug_InjErrLBA = NULL;
 		}
+		if (phba->debug_InjErrNPortID) {	 /* InjErrNPortID */
+			debugfs_remove(phba->debug_InjErrNPortID);
+			phba->debug_InjErrNPortID = NULL;
+		}
+		if (phba->debug_InjErrWWPN) {
+			debugfs_remove(phba->debug_InjErrWWPN); /* InjErrWWPN */
+			phba->debug_InjErrWWPN = NULL;
+		}
 		if (phba->debug_writeGuard) {
 			debugfs_remove(phba->debug_writeGuard); /* writeGuard */
 			phba->debug_writeGuard = NULL;
@@ -4318,6 +4376,10 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport)
 			debugfs_remove(phba->debug_writeRef); /* writeRef */
 			phba->debug_writeRef = NULL;
 		}
+		if (phba->debug_readGuard) {
+			debugfs_remove(phba->debug_readGuard); /* readGuard */
+			phba->debug_readGuard = NULL;
+		}
 		if (phba->debug_readApp) {
 			debugfs_remove(phba->debug_readApp); /* readApp */
 			phba->debug_readApp = NULL;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 7afc757338de..3407b39e0a3f 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -925,9 +925,17 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		 * due to new FCF discovery
 		 */
 		if ((phba->hba_flag & HBA_FIP_SUPPORT) &&
-		    (phba->fcf.fcf_flag & FCF_DISCOVERY) &&
-		    !((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
-		     (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED))) {
+		    (phba->fcf.fcf_flag & FCF_DISCOVERY)) {
+			if (phba->link_state < LPFC_LINK_UP)
+				goto stop_rr_fcf_flogi;
+			if ((phba->fcoe_cvl_eventtag_attn ==
+			     phba->fcoe_cvl_eventtag) &&
+			    (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+			    (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED))
+				goto stop_rr_fcf_flogi;
+			else
+				phba->fcoe_cvl_eventtag_attn =
+					phba->fcoe_cvl_eventtag;
 			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
 					"2611 FLOGI failed on FCF (x%x), "
 					"status:x%x/x%x, tmo:x%x, perform "
@@ -943,6 +951,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 				goto out;
 		}
 
+stop_rr_fcf_flogi:
 		/* FLOGI failure */
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
 				"2858 FLOGI failure Status:x%x/x%x TMO:x%x\n",
@@ -1526,7 +1535,6 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 			memcpy(&ndlp->active_rrqs.xri_bitmap,
 				&rrq.xri_bitmap,
 				sizeof(ndlp->active_rrqs.xri_bitmap));
-		lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
 		/* Since we are swapping the ndlp passed in with the new one
 		 * and the did has already been swapped, copy over the
 		 * state and names.
@@ -1536,6 +1544,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 		memcpy(&new_ndlp->nlp_nodename, &ndlp->nlp_nodename,
 			sizeof(struct lpfc_name));
 		new_ndlp->nlp_state = ndlp->nlp_state;
+		lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
 		/* Fix up the rport accordingly */
 		rport = ndlp->rport;
 		if (rport) {
@@ -7172,7 +7181,7 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			goto out;
 		/* FDISC failed */
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
-				 "0126 FDISC failed. (%d/%d)\n",
+				 "0126 FDISC failed. (x%x/x%x)\n",
 				 irsp->ulpStatus, irsp->un.ulpWord[4]);
 		goto fdisc_failed;
 	}
@@ -7283,6 +7292,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	int rc;
 
 	vport->port_state = LPFC_FDISC;
+	vport->fc_myDID = 0;
 	cmdsize = (sizeof(uint32_t) + sizeof(struct serv_parm));
 	elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp, did,
 				     ELS_CMD_FDISC);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 678a4b11059c..b507536dc5b5 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -2843,7 +2843,14 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	struct lpfc_vport *vport = mboxq->vport;
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 
-	if (mboxq->u.mb.mbxStatus) {
+	/*
+	 * VFI not supported for interface type 0, so ignore any mailbox
+	 * error (except VFI in use) and continue with the discovery.
+	 */
+	if (mboxq->u.mb.mbxStatus &&
+	    (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+			LPFC_SLI_INTF_IF_TYPE_0) &&
+	    mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
 			 "2018 REG_VFI mbxStatus error x%x "
 			 "HBA state x%x\n",
@@ -2977,9 +2984,9 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 				"topology\n");
 				/* Get Loop Map information */
 		if (bf_get(lpfc_mbx_read_top_il, la)) {
-			spin_lock_irq(shost->host_lock);
+			spin_lock(shost->host_lock);
 			vport->fc_flag |= FC_LBIT;
-			spin_unlock_irq(shost->host_lock);
+			spin_unlock(shost->host_lock);
 		}
 
 		vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la);
@@ -3029,9 +3036,9 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 				phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
 		}
 		vport->fc_myDID = phba->fc_pref_DID;
-		spin_lock_irq(shost->host_lock);
+		spin_lock(shost->host_lock);
 		vport->fc_flag |= FC_LBIT;
-		spin_unlock_irq(shost->host_lock);
+		spin_unlock(shost->host_lock);
 	}
 	spin_unlock_irq(&phba->hbalock);
 
@@ -5332,6 +5339,10 @@ lpfc_filter_by_rpi(struct lpfc_nodelist *ndlp, void *param)
 {
 	uint16_t *rpi = param;
 
+	/* check for active node */
+	if (!NLP_CHK_NODE_ACT(ndlp))
+		return 0;
+
 	return ndlp->nlp_rpi == *rpi;
 }
 
@@ -5669,14 +5680,13 @@ lpfc_fcf_inuse(struct lpfc_hba *phba)
 				ret = 1;
 				spin_unlock_irq(shost->host_lock);
 				goto out;
-			} else {
+			} else if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
+				ret = 1;
 				lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
-					"2624 RPI %x DID %x flg %x still "
-					"logged in\n",
-					ndlp->nlp_rpi, ndlp->nlp_DID,
-					ndlp->nlp_flag);
-				if (ndlp->nlp_flag & NLP_RPI_REGISTERED)
-					ret = 1;
+						"2624 RPI %x DID %x flag %x "
+						"still logged in\n",
+						ndlp->nlp_rpi, ndlp->nlp_DID,
+						ndlp->nlp_flag);
 			}
 		}
 		spin_unlock_irq(shost->host_lock);
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 7245bead3755..5f280b5ae3db 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2010 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -70,6 +70,7 @@
 /* vendor ID used in SCSI netlink calls */
 #define LPFC_NL_VENDOR_ID (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX)
 
+#define FW_REV_STR_SIZE	32
 /* Common Transport structures and definitions */
 
 union CtRevisionId {
@@ -2567,6 +2568,8 @@ typedef struct {
 
 #define  DMP_MEM_REG             0x1
 #define  DMP_NV_PARAMS           0x2
+#define  DMP_LMSD                0x3 /* Link Module Serial Data */
+#define  DMP_WELL_KNOWN          0x4
 
 #define  DMP_REGION_VPD          0xe
 #define  DMP_VPD_SIZE            0x400  /* maximum amount of VPD */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index e5bfa7f334e3..91f09761bd32 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2009 Emulex.  All rights reserved.                *
+ * Copyright (C) 2009-2012 Emulex.  All rights reserved.                *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -321,6 +321,10 @@ struct lpfc_cqe {
 #define CQE_STATUS_CMD_REJECT		0xb
 #define CQE_STATUS_FCP_TGT_LENCHECK	0xc
 #define CQE_STATUS_NEED_BUFF_ENTRY	0xf
+#define CQE_STATUS_DI_ERROR		0x16
+
+/* Used when mapping CQE status to IOCB */
+#define LPFC_IOCB_STATUS_MASK		0xf
 
 /* Status returned by hardware (valid only if status = CQE_STATUS_SUCCESS). */
 #define CQE_HW_STATUS_NO_ERR		0x0
@@ -334,6 +338,12 @@ struct lpfc_cqe {
 #define CQE_CODE_XRI_ABORTED		0x5
 #define CQE_CODE_RECEIVE_V1		0x9
 
+/*
+ * Define mask value for xri_aborted and wcqe completed CQE extended status.
+ * Currently, extended status is limited to 9 bits (0x0 -> 0x103) .
+ */
+#define WCQE_PARAM_MASK		0x1FF;
+
 /* completion queue entry for wqe completions */
 struct lpfc_wcqe_complete {
 	uint32_t word0;
@@ -348,6 +358,21 @@ struct lpfc_wcqe_complete {
 #define lpfc_wcqe_c_hw_status_WORD	word0
 	uint32_t total_data_placed;
 	uint32_t parameter;
+#define lpfc_wcqe_c_bg_edir_SHIFT	5
+#define lpfc_wcqe_c_bg_edir_MASK	0x00000001
+#define lpfc_wcqe_c_bg_edir_WORD	parameter
+#define lpfc_wcqe_c_bg_tdpv_SHIFT	3
+#define lpfc_wcqe_c_bg_tdpv_MASK	0x00000001
+#define lpfc_wcqe_c_bg_tdpv_WORD	parameter
+#define lpfc_wcqe_c_bg_re_SHIFT		2
+#define lpfc_wcqe_c_bg_re_MASK		0x00000001
+#define lpfc_wcqe_c_bg_re_WORD		parameter
+#define lpfc_wcqe_c_bg_ae_SHIFT		1
+#define lpfc_wcqe_c_bg_ae_MASK		0x00000001
+#define lpfc_wcqe_c_bg_ae_WORD		parameter
+#define lpfc_wcqe_c_bg_ge_SHIFT		0
+#define lpfc_wcqe_c_bg_ge_MASK		0x00000001
+#define lpfc_wcqe_c_bg_ge_WORD		parameter
 	uint32_t word3;
 #define lpfc_wcqe_c_valid_SHIFT		lpfc_cqe_valid_SHIFT
 #define lpfc_wcqe_c_valid_MASK		lpfc_cqe_valid_MASK
@@ -359,8 +384,8 @@ struct lpfc_wcqe_complete {
 #define lpfc_wcqe_c_pv_MASK		0x00000001
 #define lpfc_wcqe_c_pv_WORD		word3
 #define lpfc_wcqe_c_priority_SHIFT	24
-#define lpfc_wcqe_c_priority_MASK		0x00000007
-#define lpfc_wcqe_c_priority_WORD		word3
+#define lpfc_wcqe_c_priority_MASK	0x00000007
+#define lpfc_wcqe_c_priority_WORD	word3
 #define lpfc_wcqe_c_code_SHIFT		lpfc_cqe_code_SHIFT
 #define lpfc_wcqe_c_code_MASK		lpfc_cqe_code_MASK
 #define lpfc_wcqe_c_code_WORD		lpfc_cqe_code_WORD
@@ -715,12 +740,20 @@ struct lpfc_register {
 #define lpfc_eqcq_doorbell_eqci_SHIFT		9
 #define lpfc_eqcq_doorbell_eqci_MASK		0x0001
 #define lpfc_eqcq_doorbell_eqci_WORD		word0
-#define lpfc_eqcq_doorbell_cqid_SHIFT		0
-#define lpfc_eqcq_doorbell_cqid_MASK		0x03FF
-#define lpfc_eqcq_doorbell_cqid_WORD		word0
-#define lpfc_eqcq_doorbell_eqid_SHIFT		0
-#define lpfc_eqcq_doorbell_eqid_MASK		0x01FF
-#define lpfc_eqcq_doorbell_eqid_WORD		word0
+#define lpfc_eqcq_doorbell_cqid_lo_SHIFT	0
+#define lpfc_eqcq_doorbell_cqid_lo_MASK		0x03FF
+#define lpfc_eqcq_doorbell_cqid_lo_WORD		word0
+#define lpfc_eqcq_doorbell_cqid_hi_SHIFT	11
+#define lpfc_eqcq_doorbell_cqid_hi_MASK		0x001F
+#define lpfc_eqcq_doorbell_cqid_hi_WORD		word0
+#define lpfc_eqcq_doorbell_eqid_lo_SHIFT	0
+#define lpfc_eqcq_doorbell_eqid_lo_MASK		0x01FF
+#define lpfc_eqcq_doorbell_eqid_lo_WORD		word0
+#define lpfc_eqcq_doorbell_eqid_hi_SHIFT	11
+#define lpfc_eqcq_doorbell_eqid_hi_MASK		0x001F
+#define lpfc_eqcq_doorbell_eqid_hi_WORD		word0
+#define LPFC_CQID_HI_FIELD_SHIFT		10
+#define LPFC_EQID_HI_FIELD_SHIFT		9
 
 #define LPFC_BMBX			0x0160
 #define lpfc_bmbx_addr_SHIFT		2
@@ -3313,7 +3346,11 @@ struct xmit_bls_rsp64_wqe {
 	uint32_t rsrvd4;
 	struct wqe_did	wqe_dest;
 	struct wqe_common wqe_com; /* words 6-11 */
-	uint32_t rsvd_12_15[4];
+	uint32_t word12;
+#define xmit_bls_rsp64_temprpi_SHIFT  0
+#define xmit_bls_rsp64_temprpi_MASK   0x0000ffff
+#define xmit_bls_rsp64_temprpi_WORD   word12
+	uint32_t rsvd_13_15[3];
 };
 
 struct wqe_rctl_dfctl {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index dfea2dada02c..9598fdcb08ab 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -32,6 +32,7 @@
 #include <linux/aer.h>
 #include <linux/slab.h>
 #include <linux/firmware.h>
+#include <linux/miscdevice.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
@@ -1474,8 +1475,12 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 				phba->sli4_hba.u.if_type2.STATUSregaddr,
 				&portstat_reg.word0);
 		/* consider PCI bus read error as pci_channel_offline */
-		if (pci_rd_rc1 == -EIO)
+		if (pci_rd_rc1 == -EIO) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"3151 PCI bus read access failure: x%x\n",
+				readl(phba->sli4_hba.u.if_type2.STATUSregaddr));
 			return;
+		}
 		reg_err1 = readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
 		reg_err2 = readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
 		if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) {
@@ -1525,6 +1530,9 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 			}
 			/* fall through for not able to recover */
 		}
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"3152 Unrecoverable error, bring the port "
+				"offline\n");
 		lpfc_sli4_offline_eratt(phba);
 		break;
 	case LPFC_SLI_INTF_IF_TYPE_1:
@@ -2333,13 +2341,20 @@ lpfc_cleanup(struct lpfc_vport *vport)
 			continue;
 		}
 
+		/* take care of nodes in unused state before the state
+		 * machine taking action.
+		 */
+		if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) {
+			lpfc_nlp_put(ndlp);
+			continue;
+		}
+
 		if (ndlp->nlp_type & NLP_FABRIC)
 			lpfc_disc_state_machine(vport, ndlp, NULL,
 					NLP_EVT_DEVICE_RECOVERY);
 
 		lpfc_disc_state_machine(vport, ndlp, NULL,
 					     NLP_EVT_DEVICE_RM);
-
 	}
 
 	/* At this point, ALL ndlp's should be gone
@@ -2513,6 +2528,42 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba)
 }
 
 /**
+ * lpfc_sli4_node_prep - Assign RPIs for active nodes.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * Allocate RPIs for all active remote nodes. This is needed whenever
+ * an SLI4 adapter is reset and the driver is not unloading. Its purpose
+ * is to fixup the temporary rpi assignments.
+ **/
+void
+lpfc_sli4_node_prep(struct lpfc_hba *phba)
+{
+	struct lpfc_nodelist  *ndlp, *next_ndlp;
+	struct lpfc_vport **vports;
+	int i;
+
+	if (phba->sli_rev != LPFC_SLI_REV4)
+		return;
+
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+			if (vports[i]->load_flag & FC_UNLOADING)
+				continue;
+
+			list_for_each_entry_safe(ndlp, next_ndlp,
+						 &vports[i]->fc_nodes,
+						 nlp_listp) {
+				if (NLP_CHK_NODE_ACT(ndlp))
+					ndlp->nlp_rpi =
+						lpfc_sli4_alloc_rpi(phba);
+			}
+		}
+	}
+	lpfc_destroy_vport_work_array(phba, vports);
+}
+
+/**
  * lpfc_online - Initialize and bring a HBA online
  * @phba: pointer to lpfc hba data structure.
  *
@@ -2654,6 +2705,13 @@ lpfc_offline_prep(struct lpfc_hba * phba)
 				spin_lock_irq(shost->host_lock);
 				ndlp->nlp_flag &= ~NLP_NPR_ADISC;
 				spin_unlock_irq(shost->host_lock);
+				/*
+				 * Whenever an SLI4 port goes offline, free the
+				 * RPI. Get a new RPI when the adapter port
+				 * comes back online.
+				 */
+				if (phba->sli_rev == LPFC_SLI_REV4)
+					lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
 				lpfc_unreg_rpi(vports[i], ndlp);
 			}
 		}
@@ -2726,9 +2784,13 @@ lpfc_scsi_buf_update(struct lpfc_hba *phba)
 
 	spin_lock_irq(&phba->hbalock);
 	spin_lock(&phba->scsi_buf_list_lock);
-	list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list)
+	list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
 		sb->cur_iocbq.sli4_xritag =
 			phba->sli4_hba.xri_ids[sb->cur_iocbq.sli4_lxritag];
+		set_bit(sb->cur_iocbq.sli4_lxritag, phba->sli4_hba.xri_bmask);
+		phba->sli4_hba.max_cfg_param.xri_used++;
+		phba->sli4_hba.xri_count++;
+	}
 	spin_unlock(&phba->scsi_buf_list_lock);
 	spin_unlock_irq(&phba->hbalock);
 	return 0;
@@ -3663,6 +3725,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
 		break;
 
 	case LPFC_FIP_EVENT_TYPE_FCF_DEAD:
+		phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
 		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
 			"2549 FCF (x%x) disconnected from network, "
 			"tag:x%x\n", acqe_fip->index, acqe_fip->event_tag);
@@ -3724,6 +3787,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
 		}
 		break;
 	case LPFC_FIP_EVENT_TYPE_CVL:
+		phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
 		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
 			"2718 Clear Virtual Link Received for VPI 0x%x"
 			" tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag);
@@ -4327,6 +4391,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
 	struct lpfc_mqe *mqe;
 	int longs, sli_family;
+	int sges_per_segment;
 
 	/* Before proceed, wait for POST done and device ready */
 	rc = lpfc_sli4_post_status_check(phba);
@@ -4390,6 +4455,11 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
 	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
 
+	/* With BlockGuard we can have multiple SGEs per Data Segemnt */
+	sges_per_segment = 1;
+	if (phba->cfg_enable_bg)
+		sges_per_segment = 2;
+
 	/*
 	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
 	 * used to create the sg_dma_buf_pool must be dynamically calculated.
@@ -4398,7 +4468,8 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	 * sgl sizes of must be a power of 2.
 	 */
 	buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) +
-		    ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge)));
+		    (((phba->cfg_sg_seg_cnt * sges_per_segment) + 2) *
+		    sizeof(struct sli4_sge)));
 
 	sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf);
 	max_buf_size = LPFC_SLI4_MAX_BUF_SIZE;
@@ -4415,6 +4486,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	default:
 		break;
 	}
+
 	for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE;
 	     dma_buf_size < max_buf_size && buf_size > dma_buf_size;
 	     dma_buf_size = dma_buf_size << 1)
@@ -5158,8 +5230,7 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
 	 * rpi is normalized to a zero base because the physical rpi is
 	 * port based.
 	 */
-	curr_rpi_range = phba->sli4_hba.next_rpi -
-		phba->sli4_hba.max_cfg_param.rpi_base;
+	curr_rpi_range = phba->sli4_hba.next_rpi;
 	spin_unlock_irq(&phba->hbalock);
 
 	/*
@@ -5750,10 +5821,9 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
 					readl(phba->sli4_hba.u.if_type2.
 					      ERR2regaddr);
 				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"2888 Port Error Detected "
-					"during POST: "
-					"port status reg 0x%x, "
-					"port_smphr reg 0x%x, "
+					"2888 Unrecoverable port error "
+					"following POST: port status reg "
+					"0x%x, port_smphr reg 0x%x, "
 					"error 1=0x%x, error 2=0x%x\n",
 					reg_data.word0,
 					portsmphr_reg.word0,
@@ -6074,7 +6144,6 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
 		phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
 		phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
 		phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
-		phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
 		phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ?
 				(phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
 		phba->max_vports = phba->max_vpi;
@@ -7163,6 +7232,7 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 	uint32_t rdy_chk, num_resets = 0, reset_again = 0;
 	union lpfc_sli4_cfg_shdr *shdr;
 	struct lpfc_register reg_data;
+	uint16_t devid;
 
 	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
 	switch (if_type) {
@@ -7209,7 +7279,9 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 			       LPFC_SLIPORT_INIT_PORT);
 			writel(reg_data.word0, phba->sli4_hba.u.if_type2.
 			       CTRLregaddr);
-
+			/* flush */
+			pci_read_config_word(phba->pcidev,
+					     PCI_DEVICE_ID, &devid);
 			/*
 			 * Poll the Port Status Register and wait for RDY for
 			 * up to 10 seconds.  If the port doesn't respond, treat
@@ -7223,19 +7295,17 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 					rc = -ENODEV;
 					goto out;
 				}
-				if (bf_get(lpfc_sliport_status_rdy, &reg_data))
-					break;
-				if (bf_get(lpfc_sliport_status_rn, &reg_data)) {
+				if (bf_get(lpfc_sliport_status_rn, &reg_data))
 					reset_again++;
+				if (bf_get(lpfc_sliport_status_rdy, &reg_data))
 					break;
-				}
 			}
 
 			/*
 			 * If the port responds to the init request with
 			 * reset needed, delay for a bit and restart the loop.
 			 */
-			if (reset_again) {
+			if (reset_again && (rdy_chk < 1000)) {
 				msleep(10);
 				reset_again = 0;
 				continue;
@@ -7249,11 +7319,10 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 				phba->work_status[1] = readl(
 					phba->sli4_hba.u.if_type2.ERR2regaddr);
 				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"2890 Port Error Detected "
-					"during Port Reset: "
-					"port status reg 0x%x, "
+					"2890 Port error detected during port "
+					"reset(%d): port status reg 0x%x, "
 					"error 1=0x%x, error 2=0x%x\n",
-					reg_data.word0,
+					num_resets, reg_data.word0,
 					phba->work_status[0],
 					phba->work_status[1]);
 				rc = -ENODEV;
@@ -8112,6 +8181,9 @@ lpfc_unset_hba(struct lpfc_hba *phba)
 	vport->load_flag |= FC_UNLOADING;
 	spin_unlock_irq(shost->host_lock);
 
+	kfree(phba->vpi_bmask);
+	kfree(phba->vpi_ids);
+
 	lpfc_stop_hba_timers(phba);
 
 	phba->pport->work_port_events = 0;
@@ -8644,6 +8716,9 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
 	/* Final cleanup of txcmplq and reset the HBA */
 	lpfc_sli_brdrestart(phba);
 
+	kfree(phba->vpi_bmask);
+	kfree(phba->vpi_ids);
+
 	lpfc_stop_hba_timers(phba);
 	spin_lock_irq(&phba->hbalock);
 	list_del_init(&vport->listentry);
@@ -9058,7 +9133,7 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
 int
 lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
 {
-	char fwrev[32];
+	char fwrev[FW_REV_STR_SIZE];
 	struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data;
 	struct list_head dma_buffer_list;
 	int i, rc = 0;
@@ -10012,6 +10087,36 @@ lpfc_io_resume(struct pci_dev *pdev)
 	return;
 }
 
+/**
+ * lpfc_mgmt_open - method called when 'lpfcmgmt' is opened from userspace
+ * @inode: pointer to the inode representing the lpfcmgmt device
+ * @filep: pointer to the file representing the open lpfcmgmt device
+ *
+ * This routine puts a reference count on the lpfc module whenever the
+ * character device is opened
+ **/
+static int
+lpfc_mgmt_open(struct inode *inode, struct file *filep)
+{
+	try_module_get(THIS_MODULE);
+	return 0;
+}
+
+/**
+ * lpfc_mgmt_release - method called when 'lpfcmgmt' is closed in userspace
+ * @inode: pointer to the inode representing the lpfcmgmt device
+ * @filep: pointer to the file representing the open lpfcmgmt device
+ *
+ * This routine removes a reference count from the lpfc module when the
+ * character device is closed
+ **/
+static int
+lpfc_mgmt_release(struct inode *inode, struct file *filep)
+{
+	module_put(THIS_MODULE);
+	return 0;
+}
+
 static struct pci_device_id lpfc_id_table[] = {
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
 		PCI_ANY_ID, PCI_ANY_ID, },
@@ -10124,6 +10229,17 @@ static struct pci_driver lpfc_driver = {
 	.err_handler    = &lpfc_err_handler,
 };
 
+static const struct file_operations lpfc_mgmt_fop = {
+	.open = lpfc_mgmt_open,
+	.release = lpfc_mgmt_release,
+};
+
+static struct miscdevice lpfc_mgmt_dev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "lpfcmgmt",
+	.fops = &lpfc_mgmt_fop,
+};
+
 /**
  * lpfc_init - lpfc module initialization routine
  *
@@ -10144,6 +10260,11 @@ lpfc_init(void)
 	printk(LPFC_MODULE_DESC "\n");
 	printk(LPFC_COPYRIGHT "\n");
 
+	error = misc_register(&lpfc_mgmt_dev);
+	if (error)
+		printk(KERN_ERR "Could not register lpfcmgmt device, "
+			"misc_register returned with status %d", error);
+
 	if (lpfc_enable_npiv) {
 		lpfc_transport_functions.vport_create = lpfc_vport_create;
 		lpfc_transport_functions.vport_delete = lpfc_vport_delete;
@@ -10180,6 +10301,7 @@ lpfc_init(void)
 static void __exit
 lpfc_exit(void)
 {
+	misc_deregister(&lpfc_mgmt_dev);
 	pci_unregister_driver(&lpfc_driver);
 	fc_release_transport(lpfc_transport_template);
 	if (lpfc_enable_npiv)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index e8bb00559943..15ca2a9a0cdd 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1,7 +1,7 @@
  /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -48,6 +48,10 @@ static int
 lpfc_check_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		 struct lpfc_name *nn, struct lpfc_name *pn)
 {
+	/* First, we MUST have a RPI registered */
+	if (!(ndlp->nlp_flag & NLP_RPI_REGISTERED))
+		return 0;
+
 	/* Compare the ADISC rsp WWNN / WWPN matches our internal node
 	 * table entry for that node.
 	 */
@@ -385,6 +389,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (!mbox)
 		goto out;
 
+	/* Registering an existing RPI behaves differently for SLI3 vs SLI4 */
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		lpfc_unreg_rpi(vport, ndlp);
+
 	rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID,
 			    (uint8_t *) sp, mbox, ndlp->nlp_rpi);
 	if (rc) {
@@ -432,11 +440,15 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		spin_unlock_irq(shost->host_lock);
 		stat.un.b.lsRjtRsnCode = LSRJT_INVALID_CMD;
 		stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE;
-		lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
+		rc = lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
 			ndlp, mbox);
+		if (rc)
+			mempool_free(mbox, phba->mbox_mem_pool);
 		return 1;
 	}
-	lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox);
+	rc = lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox);
+	if (rc)
+		mempool_free(mbox, phba->mbox_mem_pool);
 	return 1;
 out:
 	stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
@@ -445,11 +457,43 @@ out:
 	return 0;
 }
 
+/**
+ * lpfc_mbx_cmpl_resume_rpi - Resume RPI completion routine
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox object
+ *
+ * This routine is invoked to issue a completion to a rcv'ed
+ * ADISC or PDISC after the paused RPI has been resumed.
+ **/
+static void
+lpfc_mbx_cmpl_resume_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport;
+	struct lpfc_iocbq *elsiocb;
+	struct lpfc_nodelist *ndlp;
+	uint32_t cmd;
+
+	elsiocb = (struct lpfc_iocbq *)mboxq->context1;
+	ndlp = (struct lpfc_nodelist *) mboxq->context2;
+	vport = mboxq->vport;
+	cmd = elsiocb->drvrTimeout;
+
+	if (cmd == ELS_CMD_ADISC) {
+		lpfc_els_rsp_adisc_acc(vport, elsiocb, ndlp);
+	} else {
+		lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, elsiocb,
+			ndlp, NULL);
+	}
+	kfree(elsiocb);
+	mempool_free(mboxq, phba->mbox_mem_pool);
+}
+
 static int
 lpfc_rcv_padisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		struct lpfc_iocbq *cmdiocb)
 {
 	struct Scsi_Host   *shost = lpfc_shost_from_vport(vport);
+	struct lpfc_iocbq  *elsiocb;
 	struct lpfc_dmabuf *pcmd;
 	struct serv_parm   *sp;
 	struct lpfc_name   *pnn, *ppn;
@@ -475,12 +519,43 @@ lpfc_rcv_padisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 
 	icmd = &cmdiocb->iocb;
 	if (icmd->ulpStatus == 0 && lpfc_check_adisc(vport, ndlp, pnn, ppn)) {
+
+		/*
+		 * As soon as  we send ACC, the remote NPort can
+		 * start sending us data. Thus, for SLI4 we must
+		 * resume the RPI before the ACC goes out.
+		 */
+		if (vport->phba->sli_rev == LPFC_SLI_REV4) {
+			elsiocb = kmalloc(sizeof(struct lpfc_iocbq),
+				GFP_KERNEL);
+			if (elsiocb) {
+
+				/* Save info from cmd IOCB used in rsp */
+				memcpy((uint8_t *)elsiocb, (uint8_t *)cmdiocb,
+					sizeof(struct lpfc_iocbq));
+
+				/* Save the ELS cmd */
+				elsiocb->drvrTimeout = cmd;
+
+				lpfc_sli4_resume_rpi(ndlp,
+					lpfc_mbx_cmpl_resume_rpi, elsiocb);
+				goto out;
+			}
+		}
+
 		if (cmd == ELS_CMD_ADISC) {
 			lpfc_els_rsp_adisc_acc(vport, cmdiocb, ndlp);
 		} else {
-			lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp,
-					 NULL);
+			lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb,
+				ndlp, NULL);
 		}
+out:
+		/* If we are authenticated, move to the proper state */
+		if (ndlp->nlp_type & NLP_FCP_TARGET)
+			lpfc_nlp_set_state(vport, ndlp, NLP_STE_MAPPED_NODE);
+		else
+			lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
+
 		return 1;
 	}
 	/* Reject this request because invalid parameters */
@@ -1229,7 +1304,7 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
 	}
 
 	if (phba->sli_rev == LPFC_SLI_REV4) {
-		rc = lpfc_sli4_resume_rpi(ndlp);
+		rc = lpfc_sli4_resume_rpi(ndlp, NULL, NULL);
 		if (rc) {
 			/* Stay in state and retry. */
 			ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c60f5d0b3869..88f3a83dbd2e 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -39,8 +39,8 @@
 #include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
-#include "lpfc_scsi.h"
 #include "lpfc.h"
+#include "lpfc_scsi.h"
 #include "lpfc_logmsg.h"
 #include "lpfc_crtn.h"
 #include "lpfc_vport.h"
@@ -51,13 +51,19 @@
 int _dump_buf_done;
 
 static char *dif_op_str[] = {
-	"SCSI_PROT_NORMAL",
-	"SCSI_PROT_READ_INSERT",
-	"SCSI_PROT_WRITE_STRIP",
-	"SCSI_PROT_READ_STRIP",
-	"SCSI_PROT_WRITE_INSERT",
-	"SCSI_PROT_READ_PASS",
-	"SCSI_PROT_WRITE_PASS",
+	"PROT_NORMAL",
+	"PROT_READ_INSERT",
+	"PROT_WRITE_STRIP",
+	"PROT_READ_STRIP",
+	"PROT_WRITE_INSERT",
+	"PROT_READ_PASS",
+	"PROT_WRITE_PASS",
+};
+
+static char *dif_grd_str[] = {
+	"NO_GUARD",
+	"DIF_CRC",
+	"DIX_IP",
 };
 
 struct scsi_dif_tuple {
@@ -1280,32 +1286,51 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
 }
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-/*
- * Given a scsi cmnd, determine the BlockGuard tags to be used with it
+
+/* Return if if error injection is detected by Initiator */
+#define BG_ERR_INIT	0x1
+/* Return if if error injection is detected by Target */
+#define BG_ERR_TGT	0x2
+/* Return if if swapping CSUM<-->CRC is required for error injection */
+#define BG_ERR_SWAP	0x10
+/* Return if disabling Guard/Ref/App checking is required for error injection */
+#define BG_ERR_CHECK	0x20
+
+/**
+ * lpfc_bg_err_inject - Determine if we should inject an error
+ * @phba: The Hba for which this call is being executed.
  * @sc: The SCSI command to examine
  * @reftag: (out) BlockGuard reference tag for transmitted data
  * @apptag: (out) BlockGuard application tag for transmitted data
  * @new_guard (in) Value to replace CRC with if needed
  *
- * Returns (1) if error injection was performed, (0) otherwise
- */
+ * Returns BG_ERR_* bit mask or 0 if request ignored
+ **/
 static int
 lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		uint32_t *reftag, uint16_t *apptag, uint32_t new_guard)
 {
 	struct scatterlist *sgpe; /* s/g prot entry */
 	struct scatterlist *sgde; /* s/g data entry */
-	struct scsi_dif_tuple *src;
+	struct lpfc_scsi_buf *lpfc_cmd = NULL;
+	struct scsi_dif_tuple *src = NULL;
+	struct lpfc_nodelist *ndlp;
+	struct lpfc_rport_data *rdata;
 	uint32_t op = scsi_get_prot_op(sc);
 	uint32_t blksize;
 	uint32_t numblks;
 	sector_t lba;
 	int rc = 0;
+	int blockoff = 0;
 
 	if (op == SCSI_PROT_NORMAL)
 		return 0;
 
+	sgpe = scsi_prot_sglist(sc);
+	sgde = scsi_sglist(sc);
 	lba = scsi_get_lba(sc);
+
+	/* First check if we need to match the LBA */
 	if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) {
 		blksize = lpfc_cmd_blksize(sc);
 		numblks = (scsi_bufflen(sc) + blksize - 1) / blksize;
@@ -1314,142 +1339,380 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		if ((phba->lpfc_injerr_lba < lba) ||
 			(phba->lpfc_injerr_lba >= (lba + numblks)))
 			return 0;
+		if (sgpe) {
+			blockoff = phba->lpfc_injerr_lba - lba;
+			numblks = sg_dma_len(sgpe) /
+				sizeof(struct scsi_dif_tuple);
+			if (numblks < blockoff)
+				blockoff = numblks;
+		}
 	}
 
-	sgpe = scsi_prot_sglist(sc);
-	sgde = scsi_sglist(sc);
+	/* Next check if we need to match the remote NPortID or WWPN */
+	rdata = sc->device->hostdata;
+	if (rdata && rdata->pnode) {
+		ndlp = rdata->pnode;
+
+		/* Make sure we have the right NPortID if one is specified */
+		if (phba->lpfc_injerr_nportid  &&
+			(phba->lpfc_injerr_nportid != ndlp->nlp_DID))
+			return 0;
 
-	/* Should we change the Reference Tag */
-	if (reftag) {
 		/*
-		 * If we are SCSI_PROT_WRITE_STRIP, the protection data is
-		 * being stripped from the wire, thus it doesn't matter.
+		 * Make sure we have the right WWPN if one is specified.
+		 * wwn[0] should be a non-zero NAA in a good WWPN.
 		 */
-		if ((op == SCSI_PROT_WRITE_PASS) ||
-			(op == SCSI_PROT_WRITE_INSERT)) {
-			if (phba->lpfc_injerr_wref_cnt) {
+		if (phba->lpfc_injerr_wwpn.u.wwn[0]  &&
+			(memcmp(&ndlp->nlp_portname, &phba->lpfc_injerr_wwpn,
+				sizeof(struct lpfc_name)) != 0))
+			return 0;
+	}
+
+	/* Setup a ptr to the protection data if the SCSI host provides it */
+	if (sgpe) {
+		src = (struct scsi_dif_tuple *)sg_virt(sgpe);
+		src += blockoff;
+		lpfc_cmd = (struct lpfc_scsi_buf *)sc->host_scribble;
+	}
+
+	/* Should we change the Reference Tag */
+	if (reftag) {
+		if (phba->lpfc_injerr_wref_cnt) {
+			switch (op) {
+			case SCSI_PROT_WRITE_PASS:
+				if (src) {
+					/*
+					 * For WRITE_PASS, force the error
+					 * to be sent on the wire. It should
+					 * be detected by the Target.
+					 * If blockoff != 0 error will be
+					 * inserted in middle of the IO.
+					 */
+
+					lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9076 BLKGRD: Injecting reftag error: "
+					"write lba x%lx + x%x oldrefTag x%x\n",
+					(unsigned long)lba, blockoff,
+					be32_to_cpu(src->ref_tag));
+
+					/*
+					 * Save the old ref_tag so we can
+					 * restore it on completion.
+					 */
+					if (lpfc_cmd) {
+						lpfc_cmd->prot_data_type =
+							LPFC_INJERR_REFTAG;
+						lpfc_cmd->prot_data_segment =
+							src;
+						lpfc_cmd->prot_data =
+							src->ref_tag;
+					}
+					src->ref_tag = cpu_to_be32(0xDEADBEEF);
+					phba->lpfc_injerr_wref_cnt--;
+					if (phba->lpfc_injerr_wref_cnt == 0) {
+						phba->lpfc_injerr_nportid = 0;
+						phba->lpfc_injerr_lba =
+							LPFC_INJERR_LBA_OFF;
+						memset(&phba->lpfc_injerr_wwpn,
+						  0, sizeof(struct lpfc_name));
+					}
+					rc = BG_ERR_TGT | BG_ERR_CHECK;
 
+					break;
+				}
+				/* Drop thru */
+			case SCSI_PROT_WRITE_INSERT:
+				/*
+				 * For WRITE_INSERT, force the error
+				 * to be sent on the wire. It should be
+				 * detected by the Target.
+				 */
 				/* DEADBEEF will be the reftag on the wire */
 				*reftag = 0xDEADBEEF;
 				phba->lpfc_injerr_wref_cnt--;
-				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-				rc = 1;
+				if (phba->lpfc_injerr_wref_cnt == 0) {
+					phba->lpfc_injerr_nportid = 0;
+					phba->lpfc_injerr_lba =
+					LPFC_INJERR_LBA_OFF;
+					memset(&phba->lpfc_injerr_wwpn,
+						0, sizeof(struct lpfc_name));
+				}
+				rc = BG_ERR_TGT | BG_ERR_CHECK;
+
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9078 BLKGRD: Injecting reftag error: "
+					"write lba x%lx\n", (unsigned long)lba);
+				break;
+			case SCSI_PROT_WRITE_STRIP:
+				/*
+				 * For WRITE_STRIP and WRITE_PASS,
+				 * force the error on data
+				 * being copied from SLI-Host to SLI-Port.
+				 */
+				*reftag = 0xDEADBEEF;
+				phba->lpfc_injerr_wref_cnt--;
+				if (phba->lpfc_injerr_wref_cnt == 0) {
+					phba->lpfc_injerr_nportid = 0;
+					phba->lpfc_injerr_lba =
+						LPFC_INJERR_LBA_OFF;
+					memset(&phba->lpfc_injerr_wwpn,
+						0, sizeof(struct lpfc_name));
+				}
+				rc = BG_ERR_INIT;
 
 				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-					"9081 BLKGRD: Injecting reftag error: "
+					"9077 BLKGRD: Injecting reftag error: "
 					"write lba x%lx\n", (unsigned long)lba);
+				break;
 			}
-		} else {
-			if (phba->lpfc_injerr_rref_cnt) {
+		}
+		if (phba->lpfc_injerr_rref_cnt) {
+			switch (op) {
+			case SCSI_PROT_READ_INSERT:
+			case SCSI_PROT_READ_STRIP:
+			case SCSI_PROT_READ_PASS:
+				/*
+				 * For READ_STRIP and READ_PASS, force the
+				 * error on data being read off the wire. It
+				 * should force an IO error to the driver.
+				 */
 				*reftag = 0xDEADBEEF;
 				phba->lpfc_injerr_rref_cnt--;
-				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-				rc = 1;
+				if (phba->lpfc_injerr_rref_cnt == 0) {
+					phba->lpfc_injerr_nportid = 0;
+					phba->lpfc_injerr_lba =
+						LPFC_INJERR_LBA_OFF;
+					memset(&phba->lpfc_injerr_wwpn,
+						0, sizeof(struct lpfc_name));
+				}
+				rc = BG_ERR_INIT;
 
 				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-					"9076 BLKGRD: Injecting reftag error: "
+					"9079 BLKGRD: Injecting reftag error: "
 					"read lba x%lx\n", (unsigned long)lba);
+				break;
 			}
 		}
 	}
 
 	/* Should we change the Application Tag */
 	if (apptag) {
-		/*
-		 * If we are SCSI_PROT_WRITE_STRIP, the protection data is
-		 * being stripped from the wire, thus it doesn't matter.
-		 */
-		if ((op == SCSI_PROT_WRITE_PASS) ||
-			(op == SCSI_PROT_WRITE_INSERT)) {
-			if (phba->lpfc_injerr_wapp_cnt) {
+		if (phba->lpfc_injerr_wapp_cnt) {
+			switch (op) {
+			case SCSI_PROT_WRITE_PASS:
+				if (src) {
+					/*
+					 * For WRITE_PASS, force the error
+					 * to be sent on the wire. It should
+					 * be detected by the Target.
+					 * If blockoff != 0 error will be
+					 * inserted in middle of the IO.
+					 */
 
+					lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9080 BLKGRD: Injecting apptag error: "
+					"write lba x%lx + x%x oldappTag x%x\n",
+					(unsigned long)lba, blockoff,
+					be16_to_cpu(src->app_tag));
+
+					/*
+					 * Save the old app_tag so we can
+					 * restore it on completion.
+					 */
+					if (lpfc_cmd) {
+						lpfc_cmd->prot_data_type =
+							LPFC_INJERR_APPTAG;
+						lpfc_cmd->prot_data_segment =
+							src;
+						lpfc_cmd->prot_data =
+							src->app_tag;
+					}
+					src->app_tag = cpu_to_be16(0xDEAD);
+					phba->lpfc_injerr_wapp_cnt--;
+					if (phba->lpfc_injerr_wapp_cnt == 0) {
+						phba->lpfc_injerr_nportid = 0;
+						phba->lpfc_injerr_lba =
+							LPFC_INJERR_LBA_OFF;
+						memset(&phba->lpfc_injerr_wwpn,
+						  0, sizeof(struct lpfc_name));
+					}
+					rc = BG_ERR_TGT | BG_ERR_CHECK;
+					break;
+				}
+				/* Drop thru */
+			case SCSI_PROT_WRITE_INSERT:
+				/*
+				 * For WRITE_INSERT, force the
+				 * error to be sent on the wire. It should be
+				 * detected by the Target.
+				 */
 				/* DEAD will be the apptag on the wire */
 				*apptag = 0xDEAD;
 				phba->lpfc_injerr_wapp_cnt--;
-				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-				rc = 1;
+				if (phba->lpfc_injerr_wapp_cnt == 0) {
+					phba->lpfc_injerr_nportid = 0;
+					phba->lpfc_injerr_lba =
+						LPFC_INJERR_LBA_OFF;
+					memset(&phba->lpfc_injerr_wwpn,
+						0, sizeof(struct lpfc_name));
+				}
+				rc = BG_ERR_TGT | BG_ERR_CHECK;
+
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"0813 BLKGRD: Injecting apptag error: "
+					"write lba x%lx\n", (unsigned long)lba);
+				break;
+			case SCSI_PROT_WRITE_STRIP:
+				/*
+				 * For WRITE_STRIP and WRITE_PASS,
+				 * force the error on data
+				 * being copied from SLI-Host to SLI-Port.
+				 */
+				*apptag = 0xDEAD;
+				phba->lpfc_injerr_wapp_cnt--;
+				if (phba->lpfc_injerr_wapp_cnt == 0) {
+					phba->lpfc_injerr_nportid = 0;
+					phba->lpfc_injerr_lba =
+						LPFC_INJERR_LBA_OFF;
+					memset(&phba->lpfc_injerr_wwpn,
+						0, sizeof(struct lpfc_name));
+				}
+				rc = BG_ERR_INIT;
 
 				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-					"9077 BLKGRD: Injecting apptag error: "
+					"0812 BLKGRD: Injecting apptag error: "
 					"write lba x%lx\n", (unsigned long)lba);
+				break;
 			}
-		} else {
-			if (phba->lpfc_injerr_rapp_cnt) {
+		}
+		if (phba->lpfc_injerr_rapp_cnt) {
+			switch (op) {
+			case SCSI_PROT_READ_INSERT:
+			case SCSI_PROT_READ_STRIP:
+			case SCSI_PROT_READ_PASS:
+				/*
+				 * For READ_STRIP and READ_PASS, force the
+				 * error on data being read off the wire. It
+				 * should force an IO error to the driver.
+				 */
 				*apptag = 0xDEAD;
 				phba->lpfc_injerr_rapp_cnt--;
-				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-				rc = 1;
+				if (phba->lpfc_injerr_rapp_cnt == 0) {
+					phba->lpfc_injerr_nportid = 0;
+					phba->lpfc_injerr_lba =
+						LPFC_INJERR_LBA_OFF;
+					memset(&phba->lpfc_injerr_wwpn,
+						0, sizeof(struct lpfc_name));
+				}
+				rc = BG_ERR_INIT;
 
 				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-					"9078 BLKGRD: Injecting apptag error: "
+					"0814 BLKGRD: Injecting apptag error: "
 					"read lba x%lx\n", (unsigned long)lba);
+				break;
 			}
 		}
 	}
 
+
 	/* Should we change the Guard Tag */
+	if (new_guard) {
+		if (phba->lpfc_injerr_wgrd_cnt) {
+			switch (op) {
+			case SCSI_PROT_WRITE_PASS:
+				rc = BG_ERR_CHECK;
+				/* Drop thru */
+
+			case SCSI_PROT_WRITE_INSERT:
+				/*
+				 * For WRITE_INSERT, force the
+				 * error to be sent on the wire. It should be
+				 * detected by the Target.
+				 */
+				phba->lpfc_injerr_wgrd_cnt--;
+				if (phba->lpfc_injerr_wgrd_cnt == 0) {
+					phba->lpfc_injerr_nportid = 0;
+					phba->lpfc_injerr_lba =
+						LPFC_INJERR_LBA_OFF;
+					memset(&phba->lpfc_injerr_wwpn,
+						0, sizeof(struct lpfc_name));
+				}
 
-	/*
-	 * If we are SCSI_PROT_WRITE_INSERT, the protection data is
-	 * being on the wire is being fully generated on the HBA.
-	 * The host cannot change it or force an error.
-	 */
-	if (((op == SCSI_PROT_WRITE_STRIP) ||
-		(op == SCSI_PROT_WRITE_PASS)) &&
-		phba->lpfc_injerr_wgrd_cnt) {
-		if (sgpe) {
-			src = (struct scsi_dif_tuple *)sg_virt(sgpe);
-			/*
-			 * Just inject an error in the first
-			 * prot block.
-			 */
-			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-				"9079 BLKGRD: Injecting guard error: "
-				"write lba x%lx oldGuard x%x refTag x%x\n",
-				(unsigned long)lba, src->guard_tag,
-				src->ref_tag);
+				rc |= BG_ERR_TGT | BG_ERR_SWAP;
+				/* Signals the caller to swap CRC->CSUM */
 
-			src->guard_tag = (uint16_t)new_guard;
-			phba->lpfc_injerr_wgrd_cnt--;
-			phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-			rc = 1;
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"0817 BLKGRD: Injecting guard error: "
+					"write lba x%lx\n", (unsigned long)lba);
+				break;
+			case SCSI_PROT_WRITE_STRIP:
+				/*
+				 * For WRITE_STRIP and WRITE_PASS,
+				 * force the error on data
+				 * being copied from SLI-Host to SLI-Port.
+				 */
+				phba->lpfc_injerr_wgrd_cnt--;
+				if (phba->lpfc_injerr_wgrd_cnt == 0) {
+					phba->lpfc_injerr_nportid = 0;
+					phba->lpfc_injerr_lba =
+						LPFC_INJERR_LBA_OFF;
+					memset(&phba->lpfc_injerr_wwpn,
+						0, sizeof(struct lpfc_name));
+				}
 
-		} else {
-			blksize = lpfc_cmd_blksize(sc);
-			/*
-			 * Jump past the first data block
-			 * and inject an error in the
-			 * prot data. The prot data is already
-			 * embedded after the regular data.
-			 */
-			src = (struct scsi_dif_tuple *)
-					(sg_virt(sgde) + blksize);
+				rc = BG_ERR_INIT | BG_ERR_SWAP;
+				/* Signals the caller to swap CRC->CSUM */
 
-			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-				"9080 BLKGRD: Injecting guard error: "
-				"write lba x%lx oldGuard x%x refTag x%x\n",
-				(unsigned long)lba, src->guard_tag,
-				src->ref_tag);
-
-			src->guard_tag = (uint16_t)new_guard;
-			phba->lpfc_injerr_wgrd_cnt--;
-			phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-			rc = 1;
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"0816 BLKGRD: Injecting guard error: "
+					"write lba x%lx\n", (unsigned long)lba);
+				break;
+			}
+		}
+		if (phba->lpfc_injerr_rgrd_cnt) {
+			switch (op) {
+			case SCSI_PROT_READ_INSERT:
+			case SCSI_PROT_READ_STRIP:
+			case SCSI_PROT_READ_PASS:
+				/*
+				 * For READ_STRIP and READ_PASS, force the
+				 * error on data being read off the wire. It
+				 * should force an IO error to the driver.
+				 */
+				phba->lpfc_injerr_rgrd_cnt--;
+				if (phba->lpfc_injerr_rgrd_cnt == 0) {
+					phba->lpfc_injerr_nportid = 0;
+					phba->lpfc_injerr_lba =
+						LPFC_INJERR_LBA_OFF;
+					memset(&phba->lpfc_injerr_wwpn,
+						0, sizeof(struct lpfc_name));
+				}
+
+				rc = BG_ERR_INIT | BG_ERR_SWAP;
+				/* Signals the caller to swap CRC->CSUM */
+
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"0818 BLKGRD: Injecting guard error: "
+					"read lba x%lx\n", (unsigned long)lba);
+			}
 		}
 	}
+
 	return rc;
 }
 #endif
 
-/*
- * Given a scsi cmnd, determine the BlockGuard opcodes to be used with it
+/**
+ * lpfc_sc_to_bg_opcodes - Determine the BlockGuard opcodes to be used with
+ * the specified SCSI command.
+ * @phba: The Hba for which this call is being executed.
  * @sc: The SCSI command to examine
  * @txopt: (out) BlockGuard operation for transmitted data
  * @rxopt: (out) BlockGuard operation for received data
  *
  * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
  *
- */
+ **/
 static int
 lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		uint8_t *txop, uint8_t *rxop)
@@ -1461,20 +1724,20 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		switch (scsi_get_prot_op(sc)) {
 		case SCSI_PROT_READ_INSERT:
 		case SCSI_PROT_WRITE_STRIP:
-			*txop = BG_OP_IN_CSUM_OUT_NODIF;
 			*rxop = BG_OP_IN_NODIF_OUT_CSUM;
+			*txop = BG_OP_IN_CSUM_OUT_NODIF;
 			break;
 
 		case SCSI_PROT_READ_STRIP:
 		case SCSI_PROT_WRITE_INSERT:
-			*txop = BG_OP_IN_NODIF_OUT_CRC;
 			*rxop = BG_OP_IN_CRC_OUT_NODIF;
+			*txop = BG_OP_IN_NODIF_OUT_CRC;
 			break;
 
 		case SCSI_PROT_READ_PASS:
 		case SCSI_PROT_WRITE_PASS:
-			*txop = BG_OP_IN_CSUM_OUT_CRC;
 			*rxop = BG_OP_IN_CRC_OUT_CSUM;
+			*txop = BG_OP_IN_CSUM_OUT_CRC;
 			break;
 
 		case SCSI_PROT_NORMAL:
@@ -1490,20 +1753,20 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		switch (scsi_get_prot_op(sc)) {
 		case SCSI_PROT_READ_STRIP:
 		case SCSI_PROT_WRITE_INSERT:
-			*txop = BG_OP_IN_NODIF_OUT_CRC;
 			*rxop = BG_OP_IN_CRC_OUT_NODIF;
+			*txop = BG_OP_IN_NODIF_OUT_CRC;
 			break;
 
 		case SCSI_PROT_READ_PASS:
 		case SCSI_PROT_WRITE_PASS:
-			*txop = BG_OP_IN_CRC_OUT_CRC;
 			*rxop = BG_OP_IN_CRC_OUT_CRC;
+			*txop = BG_OP_IN_CRC_OUT_CRC;
 			break;
 
 		case SCSI_PROT_READ_INSERT:
 		case SCSI_PROT_WRITE_STRIP:
-			*txop = BG_OP_IN_CRC_OUT_NODIF;
 			*rxop = BG_OP_IN_NODIF_OUT_CRC;
+			*txop = BG_OP_IN_CRC_OUT_NODIF;
 			break;
 
 		case SCSI_PROT_NORMAL:
@@ -1519,8 +1782,88 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	return ret;
 }
 
-/*
- * This function sets up buffer list for protection groups of
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+/**
+ * lpfc_bg_err_opcodes - reDetermine the BlockGuard opcodes to be used with
+ * the specified SCSI command in order to force a guard tag error.
+ * @phba: The Hba for which this call is being executed.
+ * @sc: The SCSI command to examine
+ * @txopt: (out) BlockGuard operation for transmitted data
+ * @rxopt: (out) BlockGuard operation for received data
+ *
+ * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
+ *
+ **/
+static int
+lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+		uint8_t *txop, uint8_t *rxop)
+{
+	uint8_t guard_type = scsi_host_get_guard(sc->device->host);
+	uint8_t ret = 0;
+
+	if (guard_type == SHOST_DIX_GUARD_IP) {
+		switch (scsi_get_prot_op(sc)) {
+		case SCSI_PROT_READ_INSERT:
+		case SCSI_PROT_WRITE_STRIP:
+			*rxop = BG_OP_IN_NODIF_OUT_CRC;
+			*txop = BG_OP_IN_CRC_OUT_NODIF;
+			break;
+
+		case SCSI_PROT_READ_STRIP:
+		case SCSI_PROT_WRITE_INSERT:
+			*rxop = BG_OP_IN_CSUM_OUT_NODIF;
+			*txop = BG_OP_IN_NODIF_OUT_CSUM;
+			break;
+
+		case SCSI_PROT_READ_PASS:
+		case SCSI_PROT_WRITE_PASS:
+			*rxop = BG_OP_IN_CSUM_OUT_CRC;
+			*txop = BG_OP_IN_CRC_OUT_CSUM;
+			break;
+
+		case SCSI_PROT_NORMAL:
+		default:
+			break;
+
+		}
+	} else {
+		switch (scsi_get_prot_op(sc)) {
+		case SCSI_PROT_READ_STRIP:
+		case SCSI_PROT_WRITE_INSERT:
+			*rxop = BG_OP_IN_CSUM_OUT_NODIF;
+			*txop = BG_OP_IN_NODIF_OUT_CSUM;
+			break;
+
+		case SCSI_PROT_READ_PASS:
+		case SCSI_PROT_WRITE_PASS:
+			*rxop = BG_OP_IN_CSUM_OUT_CSUM;
+			*txop = BG_OP_IN_CSUM_OUT_CSUM;
+			break;
+
+		case SCSI_PROT_READ_INSERT:
+		case SCSI_PROT_WRITE_STRIP:
+			*rxop = BG_OP_IN_NODIF_OUT_CSUM;
+			*txop = BG_OP_IN_CSUM_OUT_NODIF;
+			break;
+
+		case SCSI_PROT_NORMAL:
+		default:
+			break;
+		}
+	}
+
+	return ret;
+}
+#endif
+
+/**
+ * lpfc_bg_setup_bpl - Setup BlockGuard BPL with no protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @bpl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ *
+ * This function sets up BPL buffer list for protection groups of
  * type LPFC_PG_TYPE_NO_DIF
  *
  * This is usually used when the HBA is instructed to generate
@@ -1539,12 +1882,11 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  *                                |more Data BDE's ... (opt)|
  *                                +-------------------------+
  *
- * @sc: pointer to scsi command we're working on
- * @bpl: pointer to buffer list for protection groups
- * @datacnt: number of segments of data that have been dma mapped
  *
  * Note: Data s/g buffers have been dma mapped
- */
+ *
+ * Returns the number of BDEs added to the BPL.
+ **/
 static int
 lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		struct ulp_bde64 *bpl, int datasegcnt)
@@ -1555,6 +1897,8 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	dma_addr_t physaddr;
 	int i = 0, num_bde = 0, status;
 	int datadir = sc->sc_data_direction;
+	uint32_t rc;
+	uint32_t checking = 1;
 	uint32_t reftag;
 	unsigned blksize;
 	uint8_t txop, rxop;
@@ -1565,11 +1909,16 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	/* extract some info from the scsi command for pde*/
 	blksize = lpfc_cmd_blksize(sc);
-	reftag = scsi_get_lba(sc) & 0xffffffff;
+	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	/* reftag is the only error we can inject here */
-	lpfc_bg_err_inject(phba, sc, &reftag, 0, 0);
+	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
+	if (rc) {
+		if (rc & BG_ERR_SWAP)
+			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+		if (rc & BG_ERR_CHECK)
+			checking = 0;
+	}
 #endif
 
 	/* setup PDE5 with what we have */
@@ -1592,8 +1941,8 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	bf_set(pde6_optx, pde6, txop);
 	bf_set(pde6_oprx, pde6, rxop);
 	if (datadir == DMA_FROM_DEVICE) {
-		bf_set(pde6_ce, pde6, 1);
-		bf_set(pde6_re, pde6, 1);
+		bf_set(pde6_ce, pde6, checking);
+		bf_set(pde6_re, pde6, checking);
 	}
 	bf_set(pde6_ai, pde6, 1);
 	bf_set(pde6_ae, pde6, 0);
@@ -1627,9 +1976,16 @@ out:
 	return num_bde;
 }
 
-/*
- * This function sets up buffer list for protection groups of
- * type LPFC_PG_TYPE_DIF_BUF
+/**
+ * lpfc_bg_setup_bpl_prot - Setup BlockGuard BPL with protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @bpl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ * @protcnt: number of segment of protection data that have been dma mapped
+ *
+ * This function sets up BPL buffer list for protection groups of
+ * type LPFC_PG_TYPE_DIF
  *
  * This is usually used when DIFs are in their own buffers,
  * separate from the data. The HBA can then by instructed
@@ -1654,14 +2010,11 @@ out:
  *                                    |          ...            |
  *                                    +-------------------------+
  *
- * @sc: pointer to scsi command we're working on
- * @bpl: pointer to buffer list for protection groups
- * @datacnt: number of segments of data that have been dma mapped
- * @protcnt: number of segment of protection data that have been dma mapped
- *
  * Note: It is assumed that both data and protection s/g buffers have been
  *       mapped for DMA
- */
+ *
+ * Returns the number of BDEs added to the BPL.
+ **/
 static int
 lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		struct ulp_bde64 *bpl, int datacnt, int protcnt)
@@ -1681,6 +2034,8 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	int datadir = sc->sc_data_direction;
 	unsigned char pgdone = 0, alldone = 0;
 	unsigned blksize;
+	uint32_t rc;
+	uint32_t checking = 1;
 	uint32_t reftag;
 	uint8_t txop, rxop;
 	int num_bde = 0;
@@ -1701,11 +2056,16 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	/* extract some info from the scsi command */
 	blksize = lpfc_cmd_blksize(sc);
-	reftag = scsi_get_lba(sc) & 0xffffffff;
+	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	/* reftag / guard tag are the only errors we can inject here */
-	lpfc_bg_err_inject(phba, sc, &reftag, 0, 0xDEAD);
+	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
+	if (rc) {
+		if (rc & BG_ERR_SWAP)
+			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+		if (rc & BG_ERR_CHECK)
+			checking = 0;
+	}
 #endif
 
 	split_offset = 0;
@@ -1729,8 +2089,8 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
 		bf_set(pde6_optx, pde6, txop);
 		bf_set(pde6_oprx, pde6, rxop);
-		bf_set(pde6_ce, pde6, 1);
-		bf_set(pde6_re, pde6, 1);
+		bf_set(pde6_ce, pde6, checking);
+		bf_set(pde6_re, pde6, checking);
 		bf_set(pde6_ai, pde6, 1);
 		bf_set(pde6_ae, pde6, 0);
 		bf_set(pde6_apptagval, pde6, 0);
@@ -1852,13 +2212,358 @@ out:
 	return num_bde;
 }
 
-/*
+/**
+ * lpfc_bg_setup_sgl - Setup BlockGuard SGL with no protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @sgl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ *
+ * This function sets up SGL buffer list for protection groups of
+ * type LPFC_PG_TYPE_NO_DIF
+ *
+ * This is usually used when the HBA is instructed to generate
+ * DIFs and insert them into data stream (or strip DIF from
+ * incoming data stream)
+ *
+ * The buffer list consists of just one protection group described
+ * below:
+ *                                +-------------------------+
+ *   start of prot group  -->     |         DI_SEED         |
+ *                                +-------------------------+
+ *                                |         Data SGE        |
+ *                                +-------------------------+
+ *                                |more Data SGE's ... (opt)|
+ *                                +-------------------------+
+ *
+ *
+ * Note: Data s/g buffers have been dma mapped
+ *
+ * Returns the number of SGEs added to the SGL.
+ **/
+static int
+lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+		struct sli4_sge *sgl, int datasegcnt)
+{
+	struct scatterlist *sgde = NULL; /* s/g data entry */
+	struct sli4_sge_diseed *diseed = NULL;
+	dma_addr_t physaddr;
+	int i = 0, num_sge = 0, status;
+	int datadir = sc->sc_data_direction;
+	uint32_t reftag;
+	unsigned blksize;
+	uint8_t txop, rxop;
+	uint32_t rc;
+	uint32_t checking = 1;
+	uint32_t dma_len;
+	uint32_t dma_offset = 0;
+
+	status  = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
+	if (status)
+		goto out;
+
+	/* extract some info from the scsi command for pde*/
+	blksize = lpfc_cmd_blksize(sc);
+	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
+	if (rc) {
+		if (rc & BG_ERR_SWAP)
+			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+		if (rc & BG_ERR_CHECK)
+			checking = 0;
+	}
+#endif
+
+	/* setup DISEED with what we have */
+	diseed = (struct sli4_sge_diseed *) sgl;
+	memset(diseed, 0, sizeof(struct sli4_sge_diseed));
+	bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);
+
+	/* Endianness conversion if necessary */
+	diseed->ref_tag = cpu_to_le32(reftag);
+	diseed->ref_tag_tran = diseed->ref_tag;
+
+	/* setup DISEED with the rest of the info */
+	bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
+	bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
+	if (datadir == DMA_FROM_DEVICE) {
+		bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
+		bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+	}
+	bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
+	bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
+
+	/* Endianness conversion if necessary for DISEED */
+	diseed->word2 = cpu_to_le32(diseed->word2);
+	diseed->word3 = cpu_to_le32(diseed->word3);
+
+	/* advance bpl and increment sge count */
+	num_sge++;
+	sgl++;
+
+	/* assumption: caller has already run dma_map_sg on command data */
+	scsi_for_each_sg(sc, sgde, datasegcnt, i) {
+		physaddr = sg_dma_address(sgde);
+		dma_len = sg_dma_len(sgde);
+		sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+		sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+		if ((i + 1) == datasegcnt)
+			bf_set(lpfc_sli4_sge_last, sgl, 1);
+		else
+			bf_set(lpfc_sli4_sge_last, sgl, 0);
+		bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+		bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
+
+		sgl->sge_len = cpu_to_le32(dma_len);
+		dma_offset += dma_len;
+
+		sgl++;
+		num_sge++;
+	}
+
+out:
+	return num_sge;
+}
+
+/**
+ * lpfc_bg_setup_sgl_prot - Setup BlockGuard SGL with protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @sgl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ * @protcnt: number of segment of protection data that have been dma mapped
+ *
+ * This function sets up SGL buffer list for protection groups of
+ * type LPFC_PG_TYPE_DIF
+ *
+ * This is usually used when DIFs are in their own buffers,
+ * separate from the data. The HBA can then by instructed
+ * to place the DIFs in the outgoing stream.  For read operations,
+ * The HBA could extract the DIFs and place it in DIF buffers.
+ *
+ * The buffer list for this type consists of one or more of the
+ * protection groups described below:
+ *                                    +-------------------------+
+ *   start of first prot group  -->   |         DISEED          |
+ *                                    +-------------------------+
+ *                                    |      DIF (Prot SGE)     |
+ *                                    +-------------------------+
+ *                                    |        Data SGE         |
+ *                                    +-------------------------+
+ *                                    |more Data SGE's ... (opt)|
+ *                                    +-------------------------+
+ *   start of new  prot group  -->    |         DISEED          |
+ *                                    +-------------------------+
+ *                                    |          ...            |
+ *                                    +-------------------------+
+ *
+ * Note: It is assumed that both data and protection s/g buffers have been
+ *       mapped for DMA
+ *
+ * Returns the number of SGEs added to the SGL.
+ **/
+static int
+lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+		struct sli4_sge *sgl, int datacnt, int protcnt)
+{
+	struct scatterlist *sgde = NULL; /* s/g data entry */
+	struct scatterlist *sgpe = NULL; /* s/g prot entry */
+	struct sli4_sge_diseed *diseed = NULL;
+	dma_addr_t dataphysaddr, protphysaddr;
+	unsigned short curr_data = 0, curr_prot = 0;
+	unsigned int split_offset;
+	unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
+	unsigned int protgrp_blks, protgrp_bytes;
+	unsigned int remainder, subtotal;
+	int status;
+	unsigned char pgdone = 0, alldone = 0;
+	unsigned blksize;
+	uint32_t reftag;
+	uint8_t txop, rxop;
+	uint32_t dma_len;
+	uint32_t rc;
+	uint32_t checking = 1;
+	uint32_t dma_offset = 0;
+	int num_sge = 0;
+
+	sgpe = scsi_prot_sglist(sc);
+	sgde = scsi_sglist(sc);
+
+	if (!sgpe || !sgde) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+				"9082 Invalid s/g entry: data=0x%p prot=0x%p\n",
+				sgpe, sgde);
+		return 0;
+	}
+
+	status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
+	if (status)
+		goto out;
+
+	/* extract some info from the scsi command */
+	blksize = lpfc_cmd_blksize(sc);
+	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
+	if (rc) {
+		if (rc & BG_ERR_SWAP)
+			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+		if (rc & BG_ERR_CHECK)
+			checking = 0;
+	}
+#endif
+
+	split_offset = 0;
+	do {
+		/* setup DISEED with what we have */
+		diseed = (struct sli4_sge_diseed *) sgl;
+		memset(diseed, 0, sizeof(struct sli4_sge_diseed));
+		bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);
+
+		/* Endianness conversion if necessary */
+		diseed->ref_tag = cpu_to_le32(reftag);
+		diseed->ref_tag_tran = diseed->ref_tag;
+
+		/* setup DISEED with the rest of the info */
+		bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
+		bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
+		bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
+		bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+		bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
+		bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
+
+		/* Endianness conversion if necessary for DISEED */
+		diseed->word2 = cpu_to_le32(diseed->word2);
+		diseed->word3 = cpu_to_le32(diseed->word3);
+
+		/* advance sgl and increment bde count */
+		num_sge++;
+		sgl++;
+
+		/* setup the first BDE that points to protection buffer */
+		protphysaddr = sg_dma_address(sgpe) + protgroup_offset;
+		protgroup_len = sg_dma_len(sgpe) - protgroup_offset;
+
+		/* must be integer multiple of the DIF block length */
+		BUG_ON(protgroup_len % 8);
+
+		/* Now setup DIF SGE */
+		sgl->word2 = 0;
+		bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DIF);
+		sgl->addr_hi = le32_to_cpu(putPaddrHigh(protphysaddr));
+		sgl->addr_lo = le32_to_cpu(putPaddrLow(protphysaddr));
+		sgl->word2 = cpu_to_le32(sgl->word2);
+
+		protgrp_blks = protgroup_len / 8;
+		protgrp_bytes = protgrp_blks * blksize;
+
+		/* check if DIF SGE is crossing the 4K boundary; if so split */
+		if ((sgl->addr_lo & 0xfff) + protgroup_len > 0x1000) {
+			protgroup_remainder = 0x1000 - (sgl->addr_lo & 0xfff);
+			protgroup_offset += protgroup_remainder;
+			protgrp_blks = protgroup_remainder / 8;
+			protgrp_bytes = protgrp_blks * blksize;
+		} else {
+			protgroup_offset = 0;
+			curr_prot++;
+		}
+
+		num_sge++;
+
+		/* setup SGE's for data blocks associated with DIF data */
+		pgdone = 0;
+		subtotal = 0; /* total bytes processed for current prot grp */
+		while (!pgdone) {
+			if (!sgde) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9086 BLKGRD:%s Invalid data segment\n",
+						__func__);
+				return 0;
+			}
+			sgl++;
+			dataphysaddr = sg_dma_address(sgde) + split_offset;
+
+			remainder = sg_dma_len(sgde) - split_offset;
+
+			if ((subtotal + remainder) <= protgrp_bytes) {
+				/* we can use this whole buffer */
+				dma_len = remainder;
+				split_offset = 0;
+
+				if ((subtotal + remainder) == protgrp_bytes)
+					pgdone = 1;
+			} else {
+				/* must split this buffer with next prot grp */
+				dma_len = protgrp_bytes - subtotal;
+				split_offset += dma_len;
+			}
+
+			subtotal += dma_len;
+
+			sgl->addr_lo = cpu_to_le32(putPaddrLow(dataphysaddr));
+			sgl->addr_hi = cpu_to_le32(putPaddrHigh(dataphysaddr));
+			bf_set(lpfc_sli4_sge_last, sgl, 0);
+			bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+			bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
+
+			sgl->sge_len = cpu_to_le32(dma_len);
+			dma_offset += dma_len;
+
+			num_sge++;
+			curr_data++;
+
+			if (split_offset)
+				break;
+
+			/* Move to the next s/g segment if possible */
+			sgde = sg_next(sgde);
+		}
+
+		if (protgroup_offset) {
+			/* update the reference tag */
+			reftag += protgrp_blks;
+			sgl++;
+			continue;
+		}
+
+		/* are we done ? */
+		if (curr_prot == protcnt) {
+			bf_set(lpfc_sli4_sge_last, sgl, 1);
+			alldone = 1;
+		} else if (curr_prot < protcnt) {
+			/* advance to next prot buffer */
+			sgpe = sg_next(sgpe);
+			sgl++;
+
+			/* update the reference tag */
+			reftag += protgrp_blks;
+		} else {
+			/* if we're here, we have a bug */
+			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+				"9085 BLKGRD: bug in %s\n", __func__);
+		}
+
+	} while (!alldone);
+
+out:
+
+	return num_sge;
+}
+
+/**
+ * lpfc_prot_group_type - Get prtotection group type of SCSI command
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ *
  * Given a SCSI command that supports DIF, determine composition of protection
  * groups involved in setting up buffer lists
  *
- * Returns:
- *			      for DIF (for both read and write)
- * */
+ * Returns: Protection group type (with or without DIF)
+ *
+ **/
 static int
 lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
 {
@@ -1885,13 +2590,17 @@ lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
 	return ret;
 }
 
-/*
+/**
+ * lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be prep'ed.
+ *
  * This is the protection/DIF aware version of
  * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
  * two functions eventually, but for now, it's here
- */
+ **/
 static int
-lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
+lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
 		struct lpfc_scsi_buf *lpfc_cmd)
 {
 	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
@@ -2147,7 +2856,21 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
 		cmd->sense_buffer[8] = 0;     /* Information descriptor type */
 		cmd->sense_buffer[9] = 0xa;   /* Additional descriptor length */
 		cmd->sense_buffer[10] = 0x80; /* Validity bit */
-		bghm /= cmd->device->sector_size;
+
+		/* bghm is a "on the wire" FC frame based count */
+		switch (scsi_get_prot_op(cmd)) {
+		case SCSI_PROT_READ_INSERT:
+		case SCSI_PROT_WRITE_STRIP:
+			bghm /= cmd->device->sector_size;
+			break;
+		case SCSI_PROT_READ_STRIP:
+		case SCSI_PROT_WRITE_INSERT:
+		case SCSI_PROT_READ_PASS:
+		case SCSI_PROT_WRITE_PASS:
+			bghm /= (cmd->device->sector_size +
+				sizeof(struct scsi_dif_tuple));
+			break;
+		}
 
 		failing_sector = scsi_get_lba(cmd);
 		failing_sector += bghm;
@@ -2160,7 +2883,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
 		/* No error was reported - problem in FW? */
 		cmd->result = ScsiResult(DID_ERROR, 0);
 		lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-			"9057 BLKGRD: no errors reported!\n");
+			"9057 BLKGRD: Unknown error reported!\n");
 	}
 
 out:
@@ -2292,6 +3015,180 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 }
 
 /**
+ * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be adjusted.
+ *
+ * Adjust the data length to account for how much data
+ * is actually on the wire.
+ *
+ * returns the adjusted data length
+ **/
+static int
+lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
+		struct lpfc_scsi_buf *lpfc_cmd)
+{
+	struct scsi_cmnd *sc = lpfc_cmd->pCmd;
+	int diflen, fcpdl;
+	unsigned blksize;
+
+	fcpdl = scsi_bufflen(sc);
+
+	/* Check if there is protection data on the wire */
+	if (sc->sc_data_direction == DMA_FROM_DEVICE) {
+		/* Read */
+		if (scsi_get_prot_op(sc) ==  SCSI_PROT_READ_INSERT)
+			return fcpdl;
+
+	} else {
+		/* Write */
+		if (scsi_get_prot_op(sc) ==  SCSI_PROT_WRITE_STRIP)
+			return fcpdl;
+	}
+
+	/* If protection data on the wire, adjust the count accordingly */
+	blksize = lpfc_cmd_blksize(sc);
+	diflen = (fcpdl / blksize) * 8;
+	fcpdl += diflen;
+	return fcpdl;
+}
+
+/**
+ * lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This is the protection/DIF aware version of
+ * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
+ * two functions eventually, but for now, it's here
+ **/
+static int
+lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
+		struct lpfc_scsi_buf *lpfc_cmd)
+{
+	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+	struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl);
+	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+	uint32_t num_bde = 0;
+	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
+	int prot_group_type = 0;
+	int fcpdl;
+
+	/*
+	 * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
+	 *  fcp_rsp regions to the first data bde entry
+	 */
+	if (scsi_sg_count(scsi_cmnd)) {
+		/*
+		 * The driver stores the segment count returned from pci_map_sg
+		 * because this a count of dma-mappings used to map the use_sg
+		 * pages.  They are not guaranteed to be the same for those
+		 * architectures that implement an IOMMU.
+		 */
+		datasegcnt = dma_map_sg(&phba->pcidev->dev,
+					scsi_sglist(scsi_cmnd),
+					scsi_sg_count(scsi_cmnd), datadir);
+		if (unlikely(!datasegcnt))
+			return 1;
+
+		sgl += 1;
+		/* clear the last flag in the fcp_rsp map entry */
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 0);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+
+		sgl += 1;
+		lpfc_cmd->seg_cnt = datasegcnt;
+		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9087 BLKGRD: %s: Too many sg segments"
+					" from dma_map_sg.  Config %d, seg_cnt"
+					" %d\n",
+					__func__, phba->cfg_sg_seg_cnt,
+					lpfc_cmd->seg_cnt);
+			scsi_dma_unmap(scsi_cmnd);
+			return 1;
+		}
+
+		prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
+
+		switch (prot_group_type) {
+		case LPFC_PG_TYPE_NO_DIF:
+			num_bde = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl,
+					datasegcnt);
+			/* we should have 2 or more entries in buffer list */
+			if (num_bde < 2)
+				goto err;
+			break;
+		case LPFC_PG_TYPE_DIF_BUF:{
+			/*
+			 * This type indicates that protection buffers are
+			 * passed to the driver, so that needs to be prepared
+			 * for DMA
+			 */
+			protsegcnt = dma_map_sg(&phba->pcidev->dev,
+					scsi_prot_sglist(scsi_cmnd),
+					scsi_prot_sg_count(scsi_cmnd), datadir);
+			if (unlikely(!protsegcnt)) {
+				scsi_dma_unmap(scsi_cmnd);
+				return 1;
+			}
+
+			lpfc_cmd->prot_seg_cnt = protsegcnt;
+			if (lpfc_cmd->prot_seg_cnt
+			    > phba->cfg_prot_sg_seg_cnt) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9088 BLKGRD: %s: Too many prot sg "
+					"segments from dma_map_sg.  Config %d,"
+						"prot_seg_cnt %d\n", __func__,
+						phba->cfg_prot_sg_seg_cnt,
+						lpfc_cmd->prot_seg_cnt);
+				dma_unmap_sg(&phba->pcidev->dev,
+					     scsi_prot_sglist(scsi_cmnd),
+					     scsi_prot_sg_count(scsi_cmnd),
+					     datadir);
+				scsi_dma_unmap(scsi_cmnd);
+				return 1;
+			}
+
+			num_bde = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl,
+					datasegcnt, protsegcnt);
+			/* we should have 3 or more entries in buffer list */
+			if (num_bde < 3)
+				goto err;
+			break;
+		}
+		case LPFC_PG_TYPE_INVALID:
+		default:
+			lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+					"9083 Unexpected protection group %i\n",
+					prot_group_type);
+			return 1;
+		}
+	}
+
+	fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
+
+	fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
+
+	/*
+	 * Due to difference in data length between DIF/non-DIF paths,
+	 * we need to set word 4 of IOCB here
+	 */
+	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
+	lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF;
+
+	return 0;
+err:
+	lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+			"9084 Could not setup all needed BDE's"
+			"prot_group_type=%d, num_bde=%d\n",
+			prot_group_type, num_bde);
+	return 1;
+}
+
+/**
  * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
  * @phba: The Hba for which this call is being executed.
  * @lpfc_cmd: The scsi buffer which is going to be mapped.
@@ -2310,6 +3207,25 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 }
 
 /**
+ * lpfc_bg_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
+ * using BlockGuard.
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine wraps the actual DMA mapping function pointer from the
+ * lpfc_hba struct.
+ *
+ * Return codes:
+ *	1 - Error
+ *	0 - Success
+ **/
+static inline int
+lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+	return phba->lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
+}
+
+/**
  * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
  * @phba: Pointer to hba context object.
  * @vport: Pointer to vport object.
@@ -2639,6 +3555,37 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 	/* pick up SLI4 exhange busy status from HBA */
 	lpfc_cmd->exch_busy = pIocbOut->iocb_flag & LPFC_EXCHANGE_BUSY;
 
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	if (lpfc_cmd->prot_data_type) {
+		struct scsi_dif_tuple *src = NULL;
+
+		src =  (struct scsi_dif_tuple *)lpfc_cmd->prot_data_segment;
+		/*
+		 * Used to restore any changes to protection
+		 * data for error injection.
+		 */
+		switch (lpfc_cmd->prot_data_type) {
+		case LPFC_INJERR_REFTAG:
+			src->ref_tag =
+				lpfc_cmd->prot_data;
+			break;
+		case LPFC_INJERR_APPTAG:
+			src->app_tag =
+				(uint16_t)lpfc_cmd->prot_data;
+			break;
+		case LPFC_INJERR_GUARD:
+			src->guard_tag =
+				(uint16_t)lpfc_cmd->prot_data;
+			break;
+		default:
+			break;
+		}
+
+		lpfc_cmd->prot_data = 0;
+		lpfc_cmd->prot_data_type = 0;
+		lpfc_cmd->prot_data_segment = NULL;
+	}
+#endif
 	if (pnode && NLP_CHK_NODE_ACT(pnode))
 		atomic_dec(&pnode->cmd_pending);
 
@@ -3072,12 +4019,14 @@ lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 	case LPFC_PCI_DEV_LP:
 		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
 		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
+		phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s3;
 		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
 		phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s3;
 		break;
 	case LPFC_PCI_DEV_OC:
 		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
 		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
+		phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s4;
 		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
 		phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s4;
 		break;
@@ -3238,20 +4187,10 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 		cmnd->result = err;
 		goto out_fail_command;
 	}
-	/*
-	 * Do not let the mid-layer retry I/O too fast. If an I/O is retried
-	 * without waiting a bit then indicate that the device is busy.
-	 */
-	if (cmnd->retries &&
-	    time_before(jiffies, (cmnd->jiffies_at_alloc +
-				  msecs_to_jiffies(LPFC_RETRY_PAUSE *
-						   cmnd->retries))))
-		return SCSI_MLQUEUE_DEVICE_BUSY;
 	ndlp = rdata->pnode;
 
 	if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) &&
-		(!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) ||
-		(phba->sli_rev == LPFC_SLI_REV4))) {
+		(!(phba->sli3_options & LPFC_SLI3_BG_ENABLED))) {
 
 		lpfc_printf_log(phba, KERN_ERR, LOG_BG,
 				"9058 BLKGRD: ERROR: rcvd protected cmd:%02x"
@@ -3297,63 +4236,48 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
 		if (vport->phba->cfg_enable_bg) {
 			lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
-				"9033 BLKGRD: rcvd protected cmd:%02x op:%02x "
-				"str=%s\n",
-				cmnd->cmnd[0], scsi_get_prot_op(cmnd),
-				dif_op_str[scsi_get_prot_op(cmnd)]);
-			lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
-				"9034 BLKGRD: CDB: %02x %02x %02x %02x %02x "
-				"%02x %02x %02x %02x %02x\n",
-				cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2],
-				cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5],
-				cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
-				cmnd->cmnd[9]);
+				"9033 BLKGRD: rcvd protected cmd:%02x op=%s "
+				"guard=%s\n", cmnd->cmnd[0],
+				dif_op_str[scsi_get_prot_op(cmnd)],
+				dif_grd_str[scsi_host_get_guard(shost)]);
 			if (cmnd->cmnd[0] == READ_10)
 				lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
 					"9035 BLKGRD: READ @ sector %llu, "
-					"count %u\n",
+					"cnt %u, rpt %d\n",
 					(unsigned long long)scsi_get_lba(cmnd),
-					blk_rq_sectors(cmnd->request));
+					blk_rq_sectors(cmnd->request),
+					(cmnd->cmnd[1]>>5));
 			else if (cmnd->cmnd[0] == WRITE_10)
 				lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
 					"9036 BLKGRD: WRITE @ sector %llu, "
-					"count %u cmd=%p\n",
+					"cnt %u, wpt %d\n",
 					(unsigned long long)scsi_get_lba(cmnd),
 					blk_rq_sectors(cmnd->request),
-					cmnd);
+					(cmnd->cmnd[1]>>5));
 		}
 
 		err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
 	} else {
 		if (vport->phba->cfg_enable_bg) {
 			lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
-					"9038 BLKGRD: rcvd unprotected cmd:"
-					"%02x op:%02x str=%s\n",
-					cmnd->cmnd[0], scsi_get_prot_op(cmnd),
-					dif_op_str[scsi_get_prot_op(cmnd)]);
-				lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
-					"9039 BLKGRD: CDB: %02x %02x %02x "
-					"%02x %02x %02x %02x %02x %02x %02x\n",
-					cmnd->cmnd[0], cmnd->cmnd[1],
-					cmnd->cmnd[2], cmnd->cmnd[3],
-					cmnd->cmnd[4], cmnd->cmnd[5],
-					cmnd->cmnd[6], cmnd->cmnd[7],
-					cmnd->cmnd[8], cmnd->cmnd[9]);
+				"9038 BLKGRD: rcvd unprotected cmd:"
+				"%02x op=%s guard=%s\n", cmnd->cmnd[0],
+				dif_op_str[scsi_get_prot_op(cmnd)],
+				dif_grd_str[scsi_host_get_guard(shost)]);
 			if (cmnd->cmnd[0] == READ_10)
 				lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
 					"9040 dbg: READ @ sector %llu, "
-					"count %u\n",
+					"cnt %u, rpt %d\n",
 					(unsigned long long)scsi_get_lba(cmnd),
-					 blk_rq_sectors(cmnd->request));
+					 blk_rq_sectors(cmnd->request),
+					(cmnd->cmnd[1]>>5));
 			else if (cmnd->cmnd[0] == WRITE_10)
 				lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
-					 "9041 dbg: WRITE @ sector %llu, "
-					 "count %u cmd=%p\n",
-					 (unsigned long long)scsi_get_lba(cmnd),
-					 blk_rq_sectors(cmnd->request), cmnd);
-			else
-				lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
-					 "9042 dbg: parser not implemented\n");
+					"9041 dbg: WRITE @ sector %llu, "
+					"cnt %u, wpt %d\n",
+					(unsigned long long)scsi_get_lba(cmnd),
+					blk_rq_sectors(cmnd->request),
+					(cmnd->cmnd[1]>>5));
 		}
 		err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
 	}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index 9075a08cf781..21a2ffe67eac 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -150,9 +150,18 @@ struct lpfc_scsi_buf {
 	struct lpfc_iocbq cur_iocbq;
 	wait_queue_head_t *waitq;
 	unsigned long start_time;
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	/* Used to restore any changes to protection data for error injection */
+	void *prot_data_segment;
+	uint32_t prot_data;
+	uint32_t prot_data_type;
+#define	LPFC_INJERR_REFTAG	1
+#define	LPFC_INJERR_APPTAG	2
+#define	LPFC_INJERR_GUARD	3
+#endif
 };
 
 #define LPFC_SCSI_DMA_EXT_SIZE 264
 #define LPFC_BPL_SIZE          1024
-#define LPFC_RETRY_PAUSE       300
 #define MDAC_DIRECT_CMD                  0x22
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 23a27592388c..dbaf5b963bff 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -293,7 +293,9 @@ lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
 	}
 	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
 	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
-	bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
+	bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
+			(q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
+	bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
 	writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
 	/* PCI read to flush PCI pipeline on re-arming for INTx mode */
 	if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
@@ -372,7 +374,9 @@ lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
 		bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
 	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
 	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION);
-	bf_set(lpfc_eqcq_doorbell_cqid, &doorbell, q->queue_id);
+	bf_set(lpfc_eqcq_doorbell_cqid_hi, &doorbell,
+			(q->queue_id >> LPFC_CQID_HI_FIELD_SHIFT));
+	bf_set(lpfc_eqcq_doorbell_cqid_lo, &doorbell, q->queue_id);
 	writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
 	return released;
 }
@@ -554,81 +558,6 @@ __lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
 }
 
 /**
- * __lpfc_set_rrq_active - set RRQ active bit in the ndlp's xri_bitmap.
- * @phba: Pointer to HBA context object.
- * @ndlp: nodelist pointer for this target.
- * @xritag: xri used in this exchange.
- * @rxid: Remote Exchange ID.
- * @send_rrq: Flag used to determine if we should send rrq els cmd.
- *
- * This function is called with hbalock held.
- * The active bit is set in the ndlp's active rrq xri_bitmap. Allocates an
- * rrq struct and adds it to the active_rrq_list.
- *
- * returns  0 for rrq slot for this xri
- *         < 0  Were not able to get rrq mem or invalid parameter.
- **/
-static int
-__lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
-		uint16_t xritag, uint16_t rxid, uint16_t send_rrq)
-{
-	struct lpfc_node_rrq *rrq;
-	int empty;
-	uint32_t did = 0;
-
-
-	if (!ndlp)
-		return -EINVAL;
-
-	if (!phba->cfg_enable_rrq)
-		return -EINVAL;
-
-	if (phba->pport->load_flag & FC_UNLOADING) {
-		phba->hba_flag &= ~HBA_RRQ_ACTIVE;
-		goto out;
-	}
-	did = ndlp->nlp_DID;
-
-	/*
-	 * set the active bit even if there is no mem available.
-	 */
-	if (NLP_CHK_FREE_REQ(ndlp))
-		goto out;
-
-	if (ndlp->vport && (ndlp->vport->load_flag & FC_UNLOADING))
-		goto out;
-
-	if (test_and_set_bit(xritag, ndlp->active_rrqs.xri_bitmap))
-		goto out;
-
-	rrq = mempool_alloc(phba->rrq_pool, GFP_KERNEL);
-	if (rrq) {
-		rrq->send_rrq = send_rrq;
-		rrq->xritag = xritag;
-		rrq->rrq_stop_time = jiffies + HZ * (phba->fc_ratov + 1);
-		rrq->ndlp = ndlp;
-		rrq->nlp_DID = ndlp->nlp_DID;
-		rrq->vport = ndlp->vport;
-		rrq->rxid = rxid;
-		empty = list_empty(&phba->active_rrq_list);
-		rrq->send_rrq = send_rrq;
-		list_add_tail(&rrq->list, &phba->active_rrq_list);
-		if (!(phba->hba_flag & HBA_RRQ_ACTIVE)) {
-			phba->hba_flag |= HBA_RRQ_ACTIVE;
-			if (empty)
-				lpfc_worker_wake_up(phba);
-		}
-		return 0;
-	}
-out:
-	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
-			"2921 Can't set rrq active xri:0x%x rxid:0x%x"
-			" DID:0x%x Send:%d\n",
-			xritag, rxid, did, send_rrq);
-	return -EINVAL;
-}
-
-/**
  * lpfc_clr_rrq_active - Clears RRQ active bit in xri_bitmap.
  * @phba: Pointer to HBA context object.
  * @xritag: xri used in this exchange.
@@ -856,15 +785,68 @@ lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
  **/
 int
 lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
-			uint16_t xritag, uint16_t rxid, uint16_t send_rrq)
+		    uint16_t xritag, uint16_t rxid, uint16_t send_rrq)
 {
-	int ret;
 	unsigned long iflags;
+	struct lpfc_node_rrq *rrq;
+	int empty;
+
+	if (!ndlp)
+		return -EINVAL;
+
+	if (!phba->cfg_enable_rrq)
+		return -EINVAL;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	if (phba->pport->load_flag & FC_UNLOADING) {
+		phba->hba_flag &= ~HBA_RRQ_ACTIVE;
+		goto out;
+	}
 
+	/*
+	 * set the active bit even if there is no mem available.
+	 */
+	if (NLP_CHK_FREE_REQ(ndlp))
+		goto out;
+
+	if (ndlp->vport && (ndlp->vport->load_flag & FC_UNLOADING))
+		goto out;
+
+	if (test_and_set_bit(xritag, ndlp->active_rrqs.xri_bitmap))
+		goto out;
+
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	rrq = mempool_alloc(phba->rrq_pool, GFP_KERNEL);
+	if (!rrq) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"3155 Unable to allocate RRQ xri:0x%x rxid:0x%x"
+				" DID:0x%x Send:%d\n",
+				xritag, rxid, ndlp->nlp_DID, send_rrq);
+		return -EINVAL;
+	}
+	rrq->send_rrq = send_rrq;
+	rrq->xritag = xritag;
+	rrq->rrq_stop_time = jiffies + HZ * (phba->fc_ratov + 1);
+	rrq->ndlp = ndlp;
+	rrq->nlp_DID = ndlp->nlp_DID;
+	rrq->vport = ndlp->vport;
+	rrq->rxid = rxid;
+	rrq->send_rrq = send_rrq;
 	spin_lock_irqsave(&phba->hbalock, iflags);
-	ret = __lpfc_set_rrq_active(phba, ndlp, xritag, rxid, send_rrq);
+	empty = list_empty(&phba->active_rrq_list);
+	list_add_tail(&rrq->list, &phba->active_rrq_list);
+	phba->hba_flag |= HBA_RRQ_ACTIVE;
+	if (empty)
+		lpfc_worker_wake_up(phba);
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
-	return ret;
+	return 0;
+out:
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"2921 Can't set rrq active xri:0x%x rxid:0x%x"
+			" DID:0x%x Send:%d\n",
+			xritag, rxid, ndlp->nlp_DID, send_rrq);
+	return -EINVAL;
 }
 
 /**
@@ -5629,6 +5611,8 @@ lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba)
 			rc = -ENOMEM;
 			goto free_vpi_ids;
 		}
+		phba->sli4_hba.max_cfg_param.xri_used = 0;
+		phba->sli4_hba.xri_count = 0;
 		phba->sli4_hba.xri_ids = kzalloc(count *
 						 sizeof(uint16_t),
 						 GFP_KERNEL);
@@ -6163,6 +6147,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 		rc = -ENODEV;
 		goto out_free_mbox;
 	}
+	lpfc_sli4_node_prep(phba);
 
 	/* Create all the SLI4 queues */
 	rc = lpfc_sli4_queue_create(phba);
@@ -7267,11 +7252,13 @@ lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
 
 out_not_finished:
 	spin_lock_irqsave(&phba->hbalock, iflags);
-	mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
-	__lpfc_mbox_cmpl_put(phba, mboxq);
-	/* Release the token */
-	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
-	phba->sli.mbox_active = NULL;
+	if (phba->sli.mbox_active) {
+		mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+		__lpfc_mbox_cmpl_put(phba, mboxq);
+		/* Release the token */
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		phba->sli.mbox_active = NULL;
+	}
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 
 	return MBX_NOT_FINISHED;
@@ -7555,6 +7542,8 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
 
 	sgl  = (struct sli4_sge *)sglq->sgl;
 	icmd = &piocbq->iocb;
+	if (icmd->ulpCommand == CMD_XMIT_BLS_RSP64_CX)
+		return sglq->sli4_xritag;
 	if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
 		numBdes = icmd->un.genreq64.bdl.bdeSize /
 				sizeof(struct ulp_bde64);
@@ -7756,6 +7745,8 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
 			if (pcmd && (*pcmd == ELS_CMD_FLOGI ||
 				*pcmd == ELS_CMD_SCR ||
+				*pcmd == ELS_CMD_FDISC ||
+				*pcmd == ELS_CMD_LOGO ||
 				*pcmd == ELS_CMD_PLOGI)) {
 				bf_set(els_req64_sp, &wqe->els_req, 1);
 				bf_set(els_req64_sid, &wqe->els_req,
@@ -7763,7 +7754,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 				bf_set(wqe_ct, &wqe->els_req.wqe_com, 1);
 				bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
 					phba->vpi_ids[phba->pport->vpi]);
-			} else if (iocbq->context1) {
+			} else if (pcmd && iocbq->context1) {
 				bf_set(wqe_ct, &wqe->els_req.wqe_com, 0);
 				bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
 					phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
@@ -7830,12 +7821,16 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		bf_set(wqe_lnk, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpXS);
 		/* Always open the exchange */
 		bf_set(wqe_xc, &wqe->fcp_iwrite.wqe_com, 0);
-		bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1);
 		bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_IOD_WRITE);
 		bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com,
 		       LPFC_WQE_LENLOC_WORD4);
 		bf_set(wqe_ebde_cnt, &wqe->fcp_iwrite.wqe_com, 0);
 		bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpPU);
+		if (iocbq->iocb_flag & LPFC_IO_DIF) {
+			iocbq->iocb_flag &= ~LPFC_IO_DIF;
+			bf_set(wqe_dif, &wqe->generic.wqe_com, 1);
+		}
+		bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1);
 		break;
 	case CMD_FCP_IREAD64_CR:
 		/* word3 iocb=iotag wqe=payload_offset_len */
@@ -7849,12 +7844,16 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		bf_set(wqe_lnk, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpXS);
 		/* Always open the exchange */
 		bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
-		bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1);
 		bf_set(wqe_iod, &wqe->fcp_iread.wqe_com, LPFC_WQE_IOD_READ);
 		bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com,
 		       LPFC_WQE_LENLOC_WORD4);
 		bf_set(wqe_ebde_cnt, &wqe->fcp_iread.wqe_com, 0);
 		bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpPU);
+		if (iocbq->iocb_flag & LPFC_IO_DIF) {
+			iocbq->iocb_flag &= ~LPFC_IO_DIF;
+			bf_set(wqe_dif, &wqe->generic.wqe_com, 1);
+		}
+		bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1);
 		break;
 	case CMD_FCP_ICMND64_CR:
 		/* word3 iocb=IO_TAG wqe=reserved */
@@ -7982,6 +7981,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		xritag = 0;
 		break;
 	case CMD_XMIT_BLS_RSP64_CX:
+		ndlp = (struct lpfc_nodelist *)iocbq->context1;
 		/* As BLS ABTS RSP WQE is very different from other WQEs,
 		 * we re-construct this WQE here based on information in
 		 * iocbq from scratch.
@@ -8008,8 +8008,15 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		}
 		bf_set(xmit_bls_rsp64_seqcnthi, &wqe->xmit_bls_rsp, 0xffff);
 		bf_set(wqe_xmit_bls_pt, &wqe->xmit_bls_rsp.wqe_dest, 0x1);
+
+		/* Use CT=VPI */
+		bf_set(wqe_els_did, &wqe->xmit_bls_rsp.wqe_dest,
+			ndlp->nlp_DID);
+		bf_set(xmit_bls_rsp64_temprpi, &wqe->xmit_bls_rsp,
+			iocbq->iocb.ulpContext);
+		bf_set(wqe_ct, &wqe->xmit_bls_rsp.wqe_com, 1);
 		bf_set(wqe_ctxt_tag, &wqe->xmit_bls_rsp.wqe_com,
-		       iocbq->iocb.ulpContext);
+			phba->vpi_ids[phba->pport->vpi]);
 		bf_set(wqe_qosd, &wqe->xmit_bls_rsp.wqe_com, 1);
 		bf_set(wqe_lenloc, &wqe->xmit_bls_rsp.wqe_com,
 		       LPFC_WQE_LENLOC_NONE);
@@ -8073,8 +8080,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
 
 	if (piocb->sli4_xritag == NO_XRI) {
 		if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
-		    piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN ||
-		    piocb->iocb.ulpCommand == CMD_XMIT_BLS_RSP64_CX)
+		    piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
 			sglq = NULL;
 		else {
 			if (pring->txq_cnt) {
@@ -8383,20 +8389,32 @@ lpfc_sli4_abts_err_handler(struct lpfc_hba *phba,
 			   struct sli4_wcqe_xri_aborted *axri)
 {
 	struct lpfc_vport *vport;
+	uint32_t ext_status = 0;
 
-	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
+	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
 				"3115 Node Context not found, driver "
 				"ignoring abts err event\n");
+		return;
+	}
+
 	vport = ndlp->vport;
 	lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 			"3116 Port generated FCP XRI ABORT event on "
-			"vpi %d rpi %d xri x%x status 0x%x\n",
+			"vpi %d rpi %d xri x%x status 0x%x parameter x%x\n",
 			ndlp->vport->vpi, ndlp->nlp_rpi,
 			bf_get(lpfc_wcqe_xa_xri, axri),
-			bf_get(lpfc_wcqe_xa_status, axri));
+			bf_get(lpfc_wcqe_xa_status, axri),
+			axri->parameter);
 
-	if (bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT)
+	/*
+	 * Catch the ABTS protocol failure case.  Older OCe FW releases returned
+	 * LOCAL_REJECT and 0 for a failed ABTS exchange and later OCe and
+	 * LPe FW releases returned LOCAL_REJECT and SEQUENCE_TIMEOUT.
+	 */
+	ext_status = axri->parameter & WCQE_PARAM_MASK;
+	if ((bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT) &&
+	    ((ext_status == IOERR_SEQUENCE_TIMEOUT) || (ext_status == 0)))
 		lpfc_sli_abts_recover_port(vport, ndlp);
 }
 
@@ -9802,12 +9820,11 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
 	unsigned long timeout;
 
 	timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
+
 	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
-	spin_unlock_irq(&phba->hbalock);
 
 	if (psli->sli_flag & LPFC_SLI_ACTIVE) {
-		spin_lock_irq(&phba->hbalock);
 		/* Determine how long we might wait for the active mailbox
 		 * command to be gracefully completed by firmware.
 		 */
@@ -9826,7 +9843,9 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
 				 */
 				break;
 		}
-	}
+	} else
+		spin_unlock_irq(&phba->hbalock);
+
 	lpfc_sli_mbox_sys_flush(phba);
 }
 
@@ -10653,12 +10672,14 @@ lpfc_sli4_iocb_param_transfer(struct lpfc_hba *phba,
 			      struct lpfc_wcqe_complete *wcqe)
 {
 	unsigned long iflags;
+	uint32_t status;
 	size_t offset = offsetof(struct lpfc_iocbq, iocb);
 
 	memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
 	       sizeof(struct lpfc_iocbq) - offset);
 	/* Map WCQE parameters into irspiocb parameters */
-	pIocbIn->iocb.ulpStatus = bf_get(lpfc_wcqe_c_status, wcqe);
+	status = bf_get(lpfc_wcqe_c_status, wcqe);
+	pIocbIn->iocb.ulpStatus = (status & LPFC_IOCB_STATUS_MASK);
 	if (pIocbOut->iocb_flag & LPFC_IO_FCP)
 		if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
 			pIocbIn->iocb.un.fcpi.fcpi_parm =
@@ -10671,6 +10692,44 @@ lpfc_sli4_iocb_param_transfer(struct lpfc_hba *phba,
 		pIocbIn->iocb.un.genreq64.bdl.bdeSize = wcqe->total_data_placed;
 	}
 
+	/* Convert BG errors for completion status */
+	if (status == CQE_STATUS_DI_ERROR) {
+		pIocbIn->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
+
+		if (bf_get(lpfc_wcqe_c_bg_edir, wcqe))
+			pIocbIn->iocb.un.ulpWord[4] = IOERR_RX_DMA_FAILED;
+		else
+			pIocbIn->iocb.un.ulpWord[4] = IOERR_TX_DMA_FAILED;
+
+		pIocbIn->iocb.unsli3.sli3_bg.bgstat = 0;
+		if (bf_get(lpfc_wcqe_c_bg_ge, wcqe)) /* Guard Check failed */
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_GUARD_ERR_MASK;
+		if (bf_get(lpfc_wcqe_c_bg_ae, wcqe)) /* App Tag Check failed */
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_APPTAG_ERR_MASK;
+		if (bf_get(lpfc_wcqe_c_bg_re, wcqe)) /* Ref Tag Check failed */
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_REFTAG_ERR_MASK;
+
+		/* Check to see if there was any good data before the error */
+		if (bf_get(lpfc_wcqe_c_bg_tdpv, wcqe)) {
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_HI_WATER_MARK_PRESENT_MASK;
+			pIocbIn->iocb.unsli3.sli3_bg.bghm =
+				wcqe->total_data_placed;
+		}
+
+		/*
+		* Set ALL the error bits to indicate we don't know what
+		* type of error it is.
+		*/
+		if (!pIocbIn->iocb.unsli3.sli3_bg.bgstat)
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				(BGS_REFTAG_ERR_MASK | BGS_APPTAG_ERR_MASK |
+				BGS_GUARD_ERR_MASK);
+	}
+
 	/* Pick up HBA exchange busy condition */
 	if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
 		spin_lock_irqsave(&phba->hbalock, iflags);
@@ -13227,7 +13286,7 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba)
 	LPFC_MBOXQ_t *mbox;
 	uint32_t reqlen, alloclen, index;
 	uint32_t mbox_tmo;
-	uint16_t rsrc_start, rsrc_size, els_xri_cnt;
+	uint16_t rsrc_start, rsrc_size, els_xri_cnt, post_els_xri_cnt;
 	uint16_t xritag_start = 0, lxri = 0;
 	struct lpfc_rsrc_blks *rsrc_blk;
 	int cnt, ttl_cnt, rc = 0;
@@ -13249,6 +13308,7 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba)
 
 	cnt = 0;
 	ttl_cnt = 0;
+	post_els_xri_cnt = els_xri_cnt;
 	list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list,
 			    list) {
 		rsrc_start = rsrc_blk->rsrc_start;
@@ -13258,11 +13318,12 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba)
 				"3014 Working ELS Extent start %d, cnt %d\n",
 				rsrc_start, rsrc_size);
 
-		loop_cnt = min(els_xri_cnt, rsrc_size);
-		if (ttl_cnt + loop_cnt >= els_xri_cnt) {
-			loop_cnt = els_xri_cnt - ttl_cnt;
-			ttl_cnt = els_xri_cnt;
-		}
+		loop_cnt = min(post_els_xri_cnt, rsrc_size);
+		if (loop_cnt < post_els_xri_cnt) {
+			post_els_xri_cnt -= loop_cnt;
+			ttl_cnt += loop_cnt;
+		} else
+			ttl_cnt += post_els_xri_cnt;
 
 		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 		if (!mbox)
@@ -14042,6 +14103,13 @@ lpfc_sli4_seq_abort_rsp_cmpl(struct lpfc_hba *phba,
 {
 	if (cmd_iocbq)
 		lpfc_sli_release_iocbq(phba, cmd_iocbq);
+
+	/* Failure means BLS ABORT RSP did not get delivered to remote node*/
+	if (rsp_iocbq && rsp_iocbq->iocb.ulpStatus)
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"3154 BLS ABORT RSP failed, data:  x%x/x%x\n",
+			rsp_iocbq->iocb.ulpStatus,
+			rsp_iocbq->iocb.un.ulpWord[4]);
 }
 
 /**
@@ -14151,15 +14219,14 @@ lpfc_sli4_seq_abort_rsp(struct lpfc_hba *phba,
 		 * field and RX_ID from ABTS for RX_ID field.
 		 */
 		bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_RSP);
-		bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, rxid);
 	} else {
 		/* ABTS sent by initiator to CT exchange, construction
 		 * of BA_ACC will need to allocate a new XRI as for the
-		 * XRI_TAG and RX_ID fields.
+		 * XRI_TAG field.
 		 */
 		bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_INT);
-		bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, NO_XRI);
 	}
+	bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, rxid);
 	bf_set(lpfc_abts_oxid, &icmd->un.bls_rsp, oxid);
 
 	/* Xmit CT abts response on exchange <xid> */
@@ -14748,7 +14815,8 @@ lpfc_sli4_remove_rpis(struct lpfc_hba *phba)
  * provided rpi via a bitmask.
  **/
 int
-lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
+lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp,
+	void (*cmpl)(struct lpfc_hba *, LPFC_MBOXQ_t *), void *arg)
 {
 	LPFC_MBOXQ_t *mboxq;
 	struct lpfc_hba *phba = ndlp->phba;
@@ -14761,6 +14829,13 @@ lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
 
 	/* Post all rpi memory regions to the port. */
 	lpfc_resume_rpi(mboxq, ndlp);
+	if (cmpl) {
+		mboxq->mbox_cmpl = cmpl;
+		mboxq->context1 = arg;
+		mboxq->context2 = ndlp;
+	} else
+		mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	mboxq->vport = ndlp->vport;
 	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
 	if (rc == MBX_NOT_FINISHED) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
@@ -14982,6 +15057,7 @@ lpfc_sli4_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index)
 	LPFC_MBOXQ_t *mboxq;
 
 	phba->fcoe_eventtag_at_fcf_scan = phba->fcoe_eventtag;
+	phba->fcoe_cvl_eventtag_attn = phba->fcoe_cvl_eventtag;
 	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mboxq) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 29c13b63e323..3290b8e7ab65 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -69,6 +69,7 @@ struct lpfc_iocbq {
 #define LPFC_USE_FCPWQIDX	0x80    /* Submit to specified FCPWQ index */
 #define DSS_SECURITY_OP		0x100	/* security IO */
 #define LPFC_IO_ON_Q		0x200	/* The IO is still on the TXCMPLQ */
+#define LPFC_IO_DIF		0x400	/* T10 DIF IO */
 
 #define LPFC_FIP_ELS_ID_MASK	0xc000	/* ELS_ID range 0-3, non-shifted mask */
 #define LPFC_FIP_ELS_ID_SHIFT	14
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 3f266e2c54e0..c19d139618b7 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -633,7 +633,8 @@ void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
 void lpfc_sli4_remove_rpis(struct lpfc_hba *);
 void lpfc_sli4_async_event_proc(struct lpfc_hba *);
 void lpfc_sli4_fcf_redisc_event_proc(struct lpfc_hba *);
-int lpfc_sli4_resume_rpi(struct lpfc_nodelist *);
+int lpfc_sli4_resume_rpi(struct lpfc_nodelist *,
+			void (*)(struct lpfc_hba *, LPFC_MBOXQ_t *), void *);
 void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *);
 void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *);
 void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *,
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index dd044d01a07f..25cefc254b76 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.28"
+#define LPFC_DRIVER_VERSION "8.3.30"
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
 #define LPFC_FP_DRIVER_HANDLER_NAME	"lpfc:fp"