summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/mac_scsi.c
diff options
context:
space:
mode:
authorFinn Thain <fthain@telegraphics.com.au>2016-01-03 16:05:11 +1100
committerMartin K. Petersen <martin.petersen@oracle.com>2016-01-06 21:42:53 -0500
commit9c3f0e2b52ada30fe72beec27b83e91e12566609 (patch)
treeb8b44d2c48773e66374b5de37eefeea52f8b9d36 /drivers/scsi/mac_scsi.c
parent636b1ec8575a60fb305ad6e3ede5e79d287754b6 (diff)
downloadlinux-9c3f0e2b52ada30fe72beec27b83e91e12566609.tar.gz
linux-9c3f0e2b52ada30fe72beec27b83e91e12566609.tar.bz2
linux-9c3f0e2b52ada30fe72beec27b83e91e12566609.zip
atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT
The atari_NCR5380.c core driver now takes care of bus reset upon driver initialization if required (same as NCR5380.c). Move the Toshiba CD-ROM support into the core driver, enabled with a host flag, so that all NCR5380 drivers can make use of it. Drop the RESET_BOOT macros and the ATARI_SCSI_RESET_BOOT and ATARI_SCSI_TOSHIBA_DELAY Kconfig symbols, which are now redundant. Remove the atari_scsi_reset_boot(), mac_scsi_reset_boot() and sun3_scsi_reset_boot() routines. None of this duplicated code is needed now that all drivers can use NCR5380_maybe_reset_bus(). This brings atari_scsi, mac_scsi and sun3_scsi into line with all of the other NCR5380 drivers. The bus reset may raise an interrupt. That would be new behaviour for atari_scsi only when CONFIG_ATARI_SCSI_RESET_BOOT=n. The ST DMA interrupt is not assigned to atari_scsi at this stage, so CONFIG_ATARI_SCSI_RESET_BOOT=y may well be problematic already. Regardless, do_reset() now raises and clears the interrupt within local_irq_save/restore which should avoid problems. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ondrej Zary <linux@rainbow-software.org> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/mac_scsi.c')
-rw-r--r--drivers/scsi/mac_scsi.c65
1 files changed, 10 insertions, 55 deletions
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index e49a9b1d7c3d..4d26ef93e656 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -49,8 +49,6 @@
#include "NCR5380.h"
-#define RESET_BOOT
-
static int setup_can_queue = -1;
module_param(setup_can_queue, int, 0);
static int setup_cmd_per_lun = -1;
@@ -63,17 +61,8 @@ static int setup_use_tagged_queuing = -1;
module_param(setup_use_tagged_queuing, int, 0);
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
-
-/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
- * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
- * need ten times the standard value... */
-#define TOSHIBA_DELAY
-
-#ifdef TOSHIBA_DELAY
-#define AFTER_RESET_DELAY (5*HZ/2)
-#else
-#define AFTER_RESET_DELAY (HZ/2)
-#endif
+static int setup_toshiba_delay = -1;
+module_param(setup_toshiba_delay, int, 0);
/*
* NCR 5380 register access functions
@@ -92,12 +81,12 @@ static inline void macscsi_write(struct Scsi_Host *instance, int reg, int value)
#ifndef MODULE
static int __init mac_scsi_setup(char *str)
{
- int ints[7];
+ int ints[8];
(void)get_options(str, ARRAY_SIZE(ints), ints);
- if (ints[0] < 1 || ints[0] > 6) {
- pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>]]]]]\n");
+ if (ints[0] < 1) {
+ pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>[,<toshiba_delay>]]]]]]\n");
return 0;
}
if (ints[0] >= 1)
@@ -112,47 +101,14 @@ static int __init mac_scsi_setup(char *str)
setup_use_tagged_queuing = ints[5];
if (ints[0] >= 6)
setup_use_pdma = ints[6];
+ if (ints[0] >= 7)
+ setup_toshiba_delay = ints[7];
return 1;
}
__setup("mac5380=", mac_scsi_setup);
#endif /* !MODULE */
-#ifdef RESET_BOOT
-/*
- * Our 'bus reset on boot' function
- */
-
-static void mac_scsi_reset_boot(struct Scsi_Host *instance)
-{
- unsigned long end;
-
- /*
- * Do a SCSI reset to clean up the bus during initialization. No messing
- * with the queues, interrupts, or locks necessary here.
- */
-
- printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." );
-
- /* get in phase */
- NCR5380_write( TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
-
- /* assert RST */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
- /* The min. reset hold time is 25us, so 40us should be enough */
- udelay( 50 );
- /* reset RST and interrupt */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
- NCR5380_read( RESET_PARITY_INTERRUPT_REG );
-
- for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
- barrier();
-
- printk(KERN_INFO " done\n" );
-}
-#endif
-
#ifdef PSEUDO_DMA
/*
Pseudo-DMA: (Ove Edlund)
@@ -421,13 +377,10 @@ static int __init mac_scsi_probe(struct platform_device *pdev)
} else
host_flags |= FLAG_NO_PSEUDO_DMA;
-#ifdef RESET_BOOT
- mac_scsi_reset_boot(instance);
-#endif
-
#ifdef SUPPORT_TAGS
host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
#endif
+ host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
NCR5380_init(instance, host_flags);
@@ -438,6 +391,8 @@ static int __init mac_scsi_probe(struct platform_device *pdev)
goto fail_irq;
}
+ NCR5380_maybe_reset_bus(instance);
+
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;