summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
authorTony Battersby <tonyb@cybernetics.com>2009-01-08 12:56:58 -0500
committerJames Bottomley <James.Bottomley@HansenPartnership.com>2009-03-12 12:58:16 -0500
commit783fa7311b2c639f39c6163f9fbb05253fb2d702 (patch)
treebdb1f754113aac781190d104e85de475b04d0c1c /drivers/scsi
parenta71d035de835caa7d14ef69928e0fde9fc241cc0 (diff)
downloadlinux-783fa7311b2c639f39c6163f9fbb05253fb2d702.tar.gz
linux-783fa7311b2c639f39c6163f9fbb05253fb2d702.tar.bz2
linux-783fa7311b2c639f39c6163f9fbb05253fb2d702.zip
[SCSI] sym53c8xx: handle pci_iomap() failures
sym_init_device() doesn't check if pci_iomap() fails. It also tries to map device RAM without first checking FE_RAM. 1) Move some initialization from sym_init_device() to the top of sym2_probe(). 2) Rename sym_init_device() to sym_iomap_device(). 3) Call sym_iomap_device() after sym_check_supported() instead of before so that device->chip.features will be set. 4) Check FE_RAM in sym_iomap_device() before mapping RAM. 5) If sym_iomap_device() cannot map registers, then abort. 6) If sym_iomap_device() cannot map RAM, then fall back to not using RAM and continue. 7) Remove the check for FE_RAM in sym_attach() since dev->ram_base is now always set correctly. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_glue.c62
1 files changed, 36 insertions, 26 deletions
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 8e69b5c35f58..a0d5aa6aad79 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1236,7 +1236,7 @@ static int sym53c8xx_proc_info(struct Scsi_Host *shost, char *buffer,
#endif /* SYM_LINUX_PROC_INFO_SUPPORT */
/*
- * Free resources claimed by sym_init_device(). Note that
+ * Free resources claimed by sym_iomap_device(). Note that
* sym_free_resources() should be used instead of this function after calling
* sym_attach().
*/
@@ -1336,12 +1336,9 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
np->maxburst = dev->chip.burst_max;
np->myaddr = dev->host_id;
np->mmio_ba = (u32)dev->mmio_base;
+ np->ram_ba = (u32)dev->ram_base;
np->s.ioaddr = dev->s.ioaddr;
np->s.ramaddr = dev->s.ramaddr;
- if (!(np->features & FE_RAM))
- dev->ram_base = 0;
- if (dev->ram_base)
- np->ram_ba = (u32)dev->ram_base;
/*
* Edit its name.
@@ -1559,30 +1556,28 @@ static int __devinit sym_set_workarounds(struct sym_device *device)
}
/*
- * Read and check the PCI configuration for any detected NCR
- * boards and save data for attaching after all boards have
- * been detected.
+ * Map HBA registers and on-chip SRAM (if present).
*/
-static void __devinit
-sym_init_device(struct pci_dev *pdev, struct sym_device *device)
+static int __devinit
+sym_iomap_device(struct sym_device *device)
{
- int i = 2;
+ struct pci_dev *pdev = device->pdev;
struct pci_bus_region bus_addr;
-
- device->host_id = SYM_SETUP_HOST_ID;
- device->pdev = pdev;
+ int i = 2;
pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[1]);
device->mmio_base = bus_addr.start;
- /*
- * If the BAR is 64-bit, resource 2 will be occupied by the
- * upper 32 bits
- */
- if (!pdev->resource[i].flags)
- i++;
- pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[i]);
- device->ram_base = bus_addr.start;
+ if (device->chip.features & FE_RAM) {
+ /*
+ * If the BAR is 64-bit, resource 2 will be occupied by the
+ * upper 32 bits
+ */
+ if (!pdev->resource[i].flags)
+ i++;
+ pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[i]);
+ device->ram_base = bus_addr.start;
+ }
#ifdef CONFIG_SCSI_SYM53C8XX_MMIO
if (device->mmio_base)
@@ -1592,9 +1587,21 @@ sym_init_device(struct pci_dev *pdev, struct sym_device *device)
if (!device->s.ioaddr)
device->s.ioaddr = pci_iomap(pdev, 0,
pci_resource_len(pdev, 0));
- if (device->ram_base)
+ if (!device->s.ioaddr) {
+ dev_err(&pdev->dev, "could not map registers; giving up.\n");
+ return -EIO;
+ }
+ if (device->ram_base) {
device->s.ramaddr = pci_iomap(pdev, i,
pci_resource_len(pdev, i));
+ if (!device->s.ramaddr) {
+ dev_warn(&pdev->dev,
+ "could not map SRAM; continuing anyway.\n");
+ device->ram_base = 0;
+ }
+ }
+
+ return 0;
}
/*
@@ -1711,6 +1718,8 @@ static int __devinit sym2_probe(struct pci_dev *pdev,
memset(&sym_dev, 0, sizeof(sym_dev));
memset(&nvram, 0, sizeof(nvram));
+ sym_dev.pdev = pdev;
+ sym_dev.host_id = SYM_SETUP_HOST_ID;
if (pci_enable_device(pdev))
goto leave;
@@ -1720,12 +1729,13 @@ static int __devinit sym2_probe(struct pci_dev *pdev,
if (pci_request_regions(pdev, NAME53C8XX))
goto disable;
- sym_init_device(pdev, &sym_dev);
- do_iounmap = 1;
-
if (sym_check_supported(&sym_dev))
goto free;
+ if (sym_iomap_device(&sym_dev))
+ goto free;
+ do_iounmap = 1;
+
if (sym_check_raid(&sym_dev)) {
do_disable_device = 0; /* Don't disable the device */
goto free;