summaryrefslogtreecommitdiffstats
path: root/drivers/serial/Kconfig
diff options
context:
space:
mode:
authorAndrew Victor <andrew@sanpeople.com>2006-01-10 16:59:27 +0000
committerRussell King <rmk+kernel@arm.linux.org.uk>2006-01-10 16:59:27 +0000
commit1e6c9c2878c9c1f301449c78551e0b7c5f3e3ae5 (patch)
treeb53b95a16a4f5ee22b5ccb9a8fecbc771b9d566f /drivers/serial/Kconfig
parent977127174a7dff52d17faeeb4c4949a54221881f (diff)
downloadlinux-1e6c9c2878c9c1f301449c78551e0b7c5f3e3ae5.tar.gz
linux-1e6c9c2878c9c1f301449c78551e0b7c5f3e3ae5.tar.bz2
linux-1e6c9c2878c9c1f301449c78551e0b7c5f3e3ae5.zip
[ARM] 3242/2: AT91RM9200 support for 2.6 (Serial)
Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the Serial driver. This version uses the newly re-written GPL'ed hardware headers. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/serial/Kconfig')
-rw-r--r--drivers/serial/Kconfig34
1 files changed, 34 insertions, 0 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 1bae26a8a503..a256a020b15e 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -280,6 +280,40 @@ config SERIAL_AMBA_PL011_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
+config SERIAL_AT91
+ bool "AT91RM9200 serial port support"
+ depends on ARM && ARCH_AT91RM9200
+ select SERIAL_CORE
+ help
+ This enables the driver for the on-chip UARTs of the AT91RM9200
+ processor.
+
+config SERIAL_AT91_CONSOLE
+ bool "Support for console on AT91RM9200 serial port"
+ depends on SERIAL_AT91=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use a UART on the AT91RM9200 as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
+config SERIAL_AT91_TTYAT
+ bool "Install as device ttyAT0-4 instead of ttyS0-4"
+ depends on SERIAL_AT91=y
+ help
+ Say Y here if you wish to have the five internal AT91RM9200 UARTs
+ appear as /dev/ttyAT0-4 (major 240, minor 0-4) instead of the
+ normal /dev/ttyS0-4 (major 4, minor 64-68). This is necessary if
+ you also want other UARTs, such as external 8250/16C550 compatible
+ UARTs.
+ The ttySn nodes are legally reserved for the 8250 serial driver
+ but are often misused by other serial drivers.
+
+ To use this, you should create suitable ttyATn device nodes in
+ /dev/, and pass "console=ttyATn" to the kernel.
+
+ Say Y if you have an external 8250/16C550 UART. If unsure, say N.
+
config SERIAL_CLPS711X
tristate "CLPS711X serial port support"
depends on ARM && ARCH_CLPS711X