tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 2199 deletions

diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
deleted file mode 100644
index ee43efc7bdcc..000000000000
--- a/drivers/serial/ioc3_serial.c
+++ /dev/null
@@ -1,2199 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 Silicon Graphics, Inc.  All Rights Reserved.
- */
-
-/*
- * This file contains a module version of the ioc3 serial driver. This
- * includes all the support functions needed (support functions, etc.)
- * and the serial driver itself.
- */
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/circ_buf.h>
-#include <linux/serial_reg.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/serial_core.h>
-#include <linux/ioc3.h>
-#include <linux/slab.h>
-
-/*
- * Interesting things about the ioc3
- */
-
-#define LOGICAL_PORTS		2	/* rs232(0) and rs422(1) */
-#define PORTS_PER_CARD		2
-#define LOGICAL_PORTS_PER_CARD (PORTS_PER_CARD * LOGICAL_PORTS)
-#define MAX_CARDS		8
-#define MAX_LOGICAL_PORTS	(LOGICAL_PORTS_PER_CARD * MAX_CARDS)
-
-/* determine given the sio_ir what port it applies to */
-#define GET_PORT_FROM_SIO_IR(_x)	(_x & SIO_IR_SA) ? 0 : 1
-
-
-/*
- * we have 2 logical ports (rs232, rs422) for each physical port
- * evens are rs232, odds are rs422
- */
-#define GET_PHYSICAL_PORT(_x)	((_x) >> 1)
-#define GET_LOGICAL_PORT(_x)	((_x) & 1)
-#define IS_PHYSICAL_PORT(_x)	!((_x) & 1)
-#define IS_RS232(_x)		!((_x) & 1)
-
-static unsigned int Num_of_ioc3_cards;
-static unsigned int Submodule_slot;
-
-/* defining this will get you LOTS of great debug info */
-//#define DEBUG_INTERRUPTS
-#define DPRINT_CONFIG(_x...)	;
-//#define DPRINT_CONFIG(_x...)  printk _x
-#define NOT_PROGRESS()	;
-//#define NOT_PROGRESS()	printk("%s : fails %d\n", __func__, __LINE__)
-
-/* number of characters we want to transmit to the lower level at a time */
-#define MAX_CHARS		256
-#define FIFO_SIZE		(MAX_CHARS-1)	/* it's a uchar */
-
-/* Device name we're using */
-#define DEVICE_NAME		"ttySIOC"
-#define DEVICE_MAJOR		204
-#define DEVICE_MINOR		116
-
-/* flags for next_char_state */
-#define NCS_BREAK		0x1
-#define NCS_PARITY		0x2
-#define NCS_FRAMING		0x4
-#define NCS_OVERRUN		0x8
-
-/* cause we need SOME parameters ... */
-#define MIN_BAUD_SUPPORTED	1200
-#define MAX_BAUD_SUPPORTED	115200
-
-/* protocol types supported */
-#define PROTO_RS232		0
-#define PROTO_RS422		1
-
-/* Notification types */
-#define N_DATA_READY		0x01
-#define N_OUTPUT_LOWAT		0x02
-#define N_BREAK			0x04
-#define N_PARITY_ERROR		0x08
-#define N_FRAMING_ERROR		0x10
-#define N_OVERRUN_ERROR		0x20
-#define N_DDCD			0x40
-#define N_DCTS			0x80
-
-#define N_ALL_INPUT		(N_DATA_READY | N_BREAK			   \
-					| N_PARITY_ERROR | N_FRAMING_ERROR \
-					| N_OVERRUN_ERROR | N_DDCD | N_DCTS)
-
-#define N_ALL_OUTPUT		N_OUTPUT_LOWAT
-
-#define N_ALL_ERRORS		(N_PARITY_ERROR | N_FRAMING_ERROR \
-						| N_OVERRUN_ERROR)
-
-#define N_ALL			(N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK    \
-					| N_PARITY_ERROR | N_FRAMING_ERROR  \
-					| N_OVERRUN_ERROR | N_DDCD | N_DCTS)
-
-#define SER_CLK_SPEED(prediv)	((22000000 << 1) / prediv)
-#define SER_DIVISOR(x, clk)	(((clk) + (x) * 8) / ((x) * 16))
-#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div))
-
-/* Some masks */
-#define LCR_MASK_BITS_CHAR	(UART_LCR_WLEN5 | UART_LCR_WLEN6 \
-					| UART_LCR_WLEN7 | UART_LCR_WLEN8)
-#define LCR_MASK_STOP_BITS	(UART_LCR_STOP)
-
-#define PENDING(_a, _p)		(readl(&(_p)->vma->sio_ir) & (_a)->ic_enable)
-
-#define RING_BUF_SIZE		4096
-#define BUF_SIZE_BIT		SBBR_L_SIZE
-#define PROD_CONS_MASK		PROD_CONS_PTR_4K
-
-#define TOTAL_RING_BUF_SIZE	(RING_BUF_SIZE * 4)
-
-/* driver specific - one per card */
-struct ioc3_card {
-	struct {
-		/* uart ports are allocated here */
-		struct uart_port icp_uart_port[LOGICAL_PORTS];
-		/* the ioc3_port used for this port */
-		struct ioc3_port *icp_port;
-	} ic_port[PORTS_PER_CARD];
-	/* currently enabled interrupts */
-	uint32_t ic_enable;
-};
-
-/* Local port info for each IOC3 serial port */
-struct ioc3_port {
-	/* handy reference material */
-	struct uart_port *ip_port;
-	struct ioc3_card *ip_card;
-	struct ioc3_driver_data *ip_idd;
-	struct ioc3_submodule *ip_is;
-
-	/* pci mem addresses for this port */
-	struct ioc3_serialregs __iomem *ip_serial_regs;
-	struct ioc3_uartregs __iomem *ip_uart_regs;
-
-	/* Ring buffer page for this port */
-	dma_addr_t ip_dma_ringbuf;
-	/* vaddr of ring buffer */
-	struct ring_buffer *ip_cpu_ringbuf;
-
-	/* Rings for this port */
-	struct ring *ip_inring;
-	struct ring *ip_outring;
-
-	/* Hook to port specific values */
-	struct port_hooks *ip_hooks;
-
-	spinlock_t ip_lock;
-
-	/* Various rx/tx parameters */
-	int ip_baud;
-	int ip_tx_lowat;
-	int ip_rx_timeout;
-
-	/* Copy of notification bits */
-	int ip_notify;
-
-	/* Shadow copies of various registers so we don't need to PIO
-	 * read them constantly
-	 */
-	uint32_t ip_sscr;
-	uint32_t ip_tx_prod;
-	uint32_t ip_rx_cons;
-	unsigned char ip_flags;
-};
-
-/* tx low water mark.  We need to notify the driver whenever tx is getting
- * close to empty so it can refill the tx buffer and keep things going.
- * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll
- * have no trouble getting in more chars in time (I certainly hope so).
- */
-#define TX_LOWAT_LATENCY      1000
-#define TX_LOWAT_HZ          (1000000 / TX_LOWAT_LATENCY)
-#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ)
-
-/* Flags per port */
-#define INPUT_HIGH		0x01
-	/* used to signify that we have turned off the rx_high
-	 * temporarily - we need to drain the fifo and don't
-	 * want to get blasted with interrupts.
-	 */
-#define DCD_ON			0x02
-	/* DCD state is on */
-#define LOWAT_WRITTEN		0x04
-#define READ_ABORTED		0x08
-	/* the read was aborted - used to avaoid infinate looping
-	 * in the interrupt handler
-	 */
-#define INPUT_ENABLE		0x10
-
-/* Since each port has different register offsets and bitmasks
- * for everything, we'll store those that we need in tables so we
- * don't have to be constantly checking the port we are dealing with.
- */
-struct port_hooks {
-	uint32_t intr_delta_dcd;
-	uint32_t intr_delta_cts;
-	uint32_t intr_tx_mt;
-	uint32_t intr_rx_timer;
-	uint32_t intr_rx_high;
-	uint32_t intr_tx_explicit;
-	uint32_t intr_clear;
-	uint32_t intr_all;
-	char rs422_select_pin;
-};
-
-static struct port_hooks hooks_array[PORTS_PER_CARD] = {
-	/* values for port A */
-	{
-	.intr_delta_dcd = SIO_IR_SA_DELTA_DCD,
-	.intr_delta_cts = SIO_IR_SA_DELTA_CTS,
-	.intr_tx_mt = SIO_IR_SA_TX_MT,
-	.intr_rx_timer = SIO_IR_SA_RX_TIMER,
-	.intr_rx_high = SIO_IR_SA_RX_HIGH,
-	.intr_tx_explicit = SIO_IR_SA_TX_EXPLICIT,
-	.intr_clear = (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL
-				| SIO_IR_SA_RX_HIGH
-				| SIO_IR_SA_RX_TIMER
-				| SIO_IR_SA_DELTA_DCD
-				| SIO_IR_SA_DELTA_CTS
-				| SIO_IR_SA_INT
-				| SIO_IR_SA_TX_EXPLICIT
-				| SIO_IR_SA_MEMERR),
-	.intr_all =  SIO_IR_SA,
-	.rs422_select_pin = GPPR_UARTA_MODESEL_PIN,
-	 },
-
-	/* values for port B */
-	{
-	.intr_delta_dcd = SIO_IR_SB_DELTA_DCD,
-	.intr_delta_cts = SIO_IR_SB_DELTA_CTS,
-	.intr_tx_mt = SIO_IR_SB_TX_MT,
-	.intr_rx_timer = SIO_IR_SB_RX_TIMER,
-	.intr_rx_high = SIO_IR_SB_RX_HIGH,
-	.intr_tx_explicit = SIO_IR_SB_TX_EXPLICIT,
-	.intr_clear = (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL
-				| SIO_IR_SB_RX_HIGH
-				| SIO_IR_SB_RX_TIMER
-				| SIO_IR_SB_DELTA_DCD
-				| SIO_IR_SB_DELTA_CTS
-				| SIO_IR_SB_INT
-				| SIO_IR_SB_TX_EXPLICIT
-				| SIO_IR_SB_MEMERR),
-	.intr_all = SIO_IR_SB,
-	.rs422_select_pin = GPPR_UARTB_MODESEL_PIN,
-	 }
-};
-
-struct ring_entry {
-	union {
-		struct {
-			uint32_t alldata;
-			uint32_t allsc;
-		} all;
-		struct {
-			char data[4];	/* data bytes */
-			char sc[4];	/* status/control */
-		} s;
-	} u;
-};
-
-/* Test the valid bits in any of the 4 sc chars using "allsc" member */
-#define RING_ANY_VALID \
-	((uint32_t)(RXSB_MODEM_VALID | RXSB_DATA_VALID) * 0x01010101)
-
-#define ring_sc		u.s.sc
-#define ring_data	u.s.data
-#define ring_allsc	u.all.allsc
-
-/* Number of entries per ring buffer. */
-#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry))
-
-/* An individual ring */
-struct ring {
-	struct ring_entry entries[ENTRIES_PER_RING];
-};
-
-/* The whole enchilada */
-struct ring_buffer {
-	struct ring TX_A;
-	struct ring RX_A;
-	struct ring TX_B;
-	struct ring RX_B;
-};
-
-/* Get a ring from a port struct */
-#define RING(_p, _wh)	&(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh)
-
-/* for Infinite loop detection  */
-#define MAXITER		10000000
-
-
-/**
- * set_baud - Baud rate setting code
- * @port: port to set
- * @baud: baud rate to use
- */
-static int set_baud(struct ioc3_port *port, int baud)
-{
-	int divisor;
-	int actual_baud;
-	int diff;
-	int lcr, prediv;
-	struct ioc3_uartregs __iomem *uart;
-
-	for (prediv = 6; prediv < 64; prediv++) {
-		divisor = SER_DIVISOR(baud, SER_CLK_SPEED(prediv));
-		if (!divisor)
-			continue;	/* invalid divisor */
-		actual_baud = DIVISOR_TO_BAUD(divisor, SER_CLK_SPEED(prediv));
-
-		diff = actual_baud - baud;
-		if (diff < 0)
-			diff = -diff;
-
-		/* if we're within 1% we've found a match */
-		if (diff * 100 <= actual_baud)
-			break;
-	}
-
-	/* if the above loop completed, we didn't match
-	 * the baud rate.  give up.
-	 */
-	if (prediv == 64) {
-		NOT_PROGRESS();
-		return 1;
-	}
-
-	uart = port->ip_uart_regs;
-	lcr = readb(&uart->iu_lcr);
-
-	writeb(lcr | UART_LCR_DLAB, &uart->iu_lcr);
-	writeb((unsigned char)divisor, &uart->iu_dll);
-	writeb((unsigned char)(divisor >> 8), &uart->iu_dlm);
-	writeb((unsigned char)prediv, &uart->iu_scr);
-	writeb((unsigned char)lcr, &uart->iu_lcr);
-
-	return 0;
-}
-
-/**
- * get_ioc3_port - given a uart port, return the control structure
- * @the_port: uart port to find
- */
-static struct ioc3_port *get_ioc3_port(struct uart_port *the_port)
-{
-	struct ioc3_driver_data *idd = dev_get_drvdata(the_port->dev);
-	struct ioc3_card *card_ptr = idd->data[Submodule_slot];
-	int ii, jj;
-
-	if (!card_ptr) {
-		NOT_PROGRESS();
-		return NULL;
-	}
-	for (ii = 0; ii < PORTS_PER_CARD; ii++) {
-		for (jj = 0; jj < LOGICAL_PORTS; jj++) {
-			if (the_port == &card_ptr->ic_port[ii].icp_uart_port[jj])
-				return card_ptr->ic_port[ii].icp_port;
-		}
-	}
-	NOT_PROGRESS();
-	return NULL;
-}
-
-/**
- * port_init - Initialize the sio and ioc3 hardware for a given port
- *			called per port from attach...
- * @port: port to initialize
- */
-static int inline port_init(struct ioc3_port *port)
-{
-	uint32_t sio_cr;
-	struct port_hooks *hooks = port->ip_hooks;
-	struct ioc3_uartregs __iomem *uart;
-	int reset_loop_counter = 0xfffff;
-	struct ioc3_driver_data *idd = port->ip_idd;
-
-	/* Idle the IOC3 serial interface */
-	writel(SSCR_RESET, &port->ip_serial_regs->sscr);
-
-	/* Wait until any pending bus activity for this port has ceased */
-	do {
-		sio_cr = readl(&idd->vma->sio_cr);
-		if (reset_loop_counter-- <= 0) {
-			printk(KERN_WARNING
-			       "IOC3 unable to come out of reset"
-				" scr 0x%x\n", sio_cr);
-			return -1;
-		}
-	} while (!(sio_cr & SIO_CR_ARB_DIAG_IDLE) &&
-	       (((sio_cr &= SIO_CR_ARB_DIAG) == SIO_CR_ARB_DIAG_TXA)
-		|| sio_cr == SIO_CR_ARB_DIAG_TXB
-		|| sio_cr == SIO_CR_ARB_DIAG_RXA
-		|| sio_cr == SIO_CR_ARB_DIAG_RXB));
-
-	/* Finish reset sequence */
-	writel(0, &port->ip_serial_regs->sscr);
-
-	/* Once RESET is done, reload cached tx_prod and rx_cons values
-	 * and set rings to empty by making prod == cons
-	 */
-	port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
-	writel(port->ip_tx_prod, &port->ip_serial_regs->stpir);
-	port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
-	writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir);
-
-	/* Disable interrupts for this 16550 */
-	uart = port->ip_uart_regs;
-	writeb(0, &uart->iu_lcr);
-	writeb(0, &uart->iu_ier);
-
-	/* Set the default baud */
-	set_baud(port, port->ip_baud);
-
-	/* Set line control to 8 bits no parity */
-	writeb(UART_LCR_WLEN8 | 0, &uart->iu_lcr);
-	/* UART_LCR_STOP == 1 stop */
-
-	/* Enable the FIFOs */
-	writeb(UART_FCR_ENABLE_FIFO, &uart->iu_fcr);
-	/* then reset 16550 FIFOs */
-	writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
-	       &uart->iu_fcr);
-
-	/* Clear modem control register */
-	writeb(0, &uart->iu_mcr);
-
-	/* Clear deltas in modem status register */
-	writel(0, &port->ip_serial_regs->shadow);
-
-	/* Only do this once per port pair */
-	if (port->ip_hooks == &hooks_array[0]) {
-		unsigned long ring_pci_addr;
-		uint32_t __iomem *sbbr_l, *sbbr_h;
-
-		sbbr_l = &idd->vma->sbbr_l;
-		sbbr_h = &idd->vma->sbbr_h;
-		ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf;
-		DPRINT_CONFIG(("%s: ring_pci_addr 0x%p\n",
-			       __func__, (void *)ring_pci_addr));
-
-		writel((unsigned int)((uint64_t) ring_pci_addr >> 32), sbbr_h);
-		writel((unsigned int)ring_pci_addr | BUF_SIZE_BIT, sbbr_l);
-	}
-
-	/* Set the receive timeout value to 10 msec */
-	writel(SRTR_HZ / 100, &port->ip_serial_regs->srtr);
-
-	/* Set rx threshold, enable DMA */
-	/* Set high water mark at 3/4 of full ring */
-	port->ip_sscr = (ENTRIES_PER_RING * 3 / 4);
-
-	/* uart experiences pauses at high baud rate reducing actual
-	 * throughput by 10% or so unless we enable high speed polling
-	 * XXX when this hardware bug is resolved we should revert to
-	 * normal polling speed
-	 */
-	port->ip_sscr |= SSCR_HIGH_SPD;
-
-	writel(port->ip_sscr, &port->ip_serial_regs->sscr);
-
-	/* Disable and clear all serial related interrupt bits */
-	port->ip_card->ic_enable &= ~hooks->intr_clear;
-	ioc3_disable(port->ip_is, idd, hooks->intr_clear);
-	ioc3_ack(port->ip_is, idd, hooks->intr_clear);
-	return 0;
-}
-
-/**
- * enable_intrs - enable interrupts
- * @port: port to enable
- * @mask: mask to use
- */
-static void enable_intrs(struct ioc3_port *port, uint32_t mask)
-{
-	if ((port->ip_card->ic_enable & mask) != mask) {
-		port->ip_card->ic_enable |= mask;
-		ioc3_enable(port->ip_is, port->ip_idd, mask);
-	}
-}
-
-/**
- * local_open - local open a port
- * @port: port to open
- */
-static inline int local_open(struct ioc3_port *port)
-{
-	int spiniter = 0;
-
-	port->ip_flags = INPUT_ENABLE;
-
-	/* Pause the DMA interface if necessary */
-	if (port->ip_sscr & SSCR_DMA_EN) {
-		writel(port->ip_sscr | SSCR_DMA_PAUSE,
-		       &port->ip_serial_regs->sscr);
-		while ((readl(&port->ip_serial_regs->sscr)
-			& SSCR_PAUSE_STATE) == 0) {
-			spiniter++;
-			if (spiniter > MAXITER) {
-				NOT_PROGRESS();
-				return -1;
-			}
-		}
-	}
-
-	/* Reset the input fifo.  If the uart received chars while the port
-	 * was closed and DMA is not enabled, the uart may have a bunch of
-	 * chars hanging around in its rx fifo which will not be discarded
-	 * by rclr in the upper layer. We must get rid of them here.
-	 */
-	writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR,
-	       &port->ip_uart_regs->iu_fcr);
-
-	writeb(UART_LCR_WLEN8, &port->ip_uart_regs->iu_lcr);
-	/* UART_LCR_STOP == 1 stop */
-
-	/* Re-enable DMA, set default threshold to intr whenever there is
-	 * data available.
-	 */
-	port->ip_sscr &= ~SSCR_RX_THRESHOLD;
-	port->ip_sscr |= 1;	/* default threshold */
-
-	/* Plug in the new sscr.  This implicitly clears the DMA_PAUSE
-	 * flag if it was set above
-	 */
-	writel(port->ip_sscr, &port->ip_serial_regs->sscr);
-	port->ip_tx_lowat = 1;
-	return 0;
-}
-
-/**
- * set_rx_timeout - Set rx timeout and threshold values.
- * @port: port to use
- * @timeout: timeout value in ticks
- */
-static inline int set_rx_timeout(struct ioc3_port *port, int timeout)
-{
-	int threshold;
-
-	port->ip_rx_timeout = timeout;
-
-	/* Timeout is in ticks.  Let's figure out how many chars we
-	 * can receive at the current baud rate in that interval
-	 * and set the rx threshold to that amount.  There are 4 chars
-	 * per ring entry, so we'll divide the number of chars that will
-	 * arrive in timeout by 4.
-	 * So .... timeout * baud / 10 / HZ / 4, with HZ = 100.
-	 */
-	threshold = timeout * port->ip_baud / 4000;
-	if (threshold == 0)
-		threshold = 1;	/* otherwise we'll intr all the time! */
-
-	if ((unsigned)threshold > (unsigned)SSCR_RX_THRESHOLD)
-		return 1;
-
-	port->ip_sscr &= ~SSCR_RX_THRESHOLD;
-	port->ip_sscr |= threshold;
-	writel(port->ip_sscr, &port->ip_serial_regs->sscr);
-
-	/* Now set the rx timeout to the given value
-	 * again timeout * SRTR_HZ / HZ
-	 */
-	timeout = timeout * SRTR_HZ / 100;
-	if (timeout > SRTR_CNT)
-		timeout = SRTR_CNT;
-	writel(timeout, &port->ip_serial_regs->srtr);
-	return 0;
-}
-
-/**
- * config_port - config the hardware
- * @port: port to config
- * @baud: baud rate for the port
- * @byte_size: data size
- * @stop_bits: number of stop bits
- * @parenb: parity enable ?
- * @parodd: odd parity ?
- */
-static inline int
-config_port(struct ioc3_port *port,
-	    int baud, int byte_size, int stop_bits, int parenb, int parodd)
-{
-	char lcr, sizebits;
-	int spiniter = 0;
-
-	DPRINT_CONFIG(("%s: line %d baud %d byte_size %d stop %d parenb %d "
-			"parodd %d\n",
-		       __func__, ((struct uart_port *)port->ip_port)->line,
-			baud, byte_size, stop_bits, parenb, parodd));
-
-	if (set_baud(port, baud))
-		return 1;
-
-	switch (byte_size) {
-	case 5:
-		sizebits = UART_LCR_WLEN5;
-		break;
-	case 6:
-		sizebits = UART_LCR_WLEN6;
-		break;
-	case 7:
-		sizebits = UART_LCR_WLEN7;
-		break;
-	case 8:
-		sizebits = UART_LCR_WLEN8;
-		break;
-	default:
-		return 1;
-	}
-
-	/* Pause the DMA interface if necessary */
-	if (port->ip_sscr & SSCR_DMA_EN) {
-		writel(port->ip_sscr | SSCR_DMA_PAUSE,
-		       &port->ip_serial_regs->sscr);
-		while ((readl(&port->ip_serial_regs->sscr)
-			& SSCR_PAUSE_STATE) == 0) {
-			spiniter++;
-			if (spiniter > MAXITER)
-				return -1;
-		}
-	}
-
-	/* Clear relevant fields in lcr */
-	lcr = readb(&port->ip_uart_regs->iu_lcr);
-	lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR |
-		 UART_LCR_PARITY | LCR_MASK_STOP_BITS);
-
-	/* Set byte size in lcr */
-	lcr |= sizebits;
-
-	/* Set parity */
-	if (parenb) {
-		lcr |= UART_LCR_PARITY;
-		if (!parodd)
-			lcr |= UART_LCR_EPAR;
-	}
-
-	/* Set stop bits */
-	if (stop_bits)
-		lcr |= UART_LCR_STOP /* 2 stop bits */ ;
-
-	writeb(lcr, &port->ip_uart_regs->iu_lcr);
-
-	/* Re-enable the DMA interface if necessary */
-	if (port->ip_sscr & SSCR_DMA_EN) {
-		writel(port->ip_sscr, &port->ip_serial_regs->sscr);
-	}
-	port->ip_baud = baud;
-
-	/* When we get within this number of ring entries of filling the
-	 * entire ring on tx, place an EXPLICIT intr to generate a lowat
-	 * notification when output has drained.
-	 */
-	port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4;
-	if (port->ip_tx_lowat == 0)
-		port->ip_tx_lowat = 1;
-
-	set_rx_timeout(port, 2);
-	return 0;
-}
-
-/**
- * do_write - Write bytes to the port.  Returns the number of bytes
- *			actually written. Called from transmit_chars
- * @port: port to use
- * @buf: the stuff to write
- * @len: how many bytes in 'buf'
- */
-static inline int do_write(struct ioc3_port *port, char *buf, int len)
-{
-	int prod_ptr, cons_ptr, total = 0;
-	struct ring *outring;
-	struct ring_entry *entry;
-	struct port_hooks *hooks = port->ip_hooks;
-
-	BUG_ON(!(len >= 0));
-
-	prod_ptr = port->ip_tx_prod;
-	cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
-	outring = port->ip_outring;
-
-	/* Maintain a 1-entry red-zone.  The ring buffer is full when
-	 * (cons - prod) % ring_size is 1.  Rather than do this subtraction
-	 * in the body of the loop, I'll do it now.
-	 */
-	cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK;
-
-	/* Stuff the bytes into the output */
-	while ((prod_ptr != cons_ptr) && (len > 0)) {
-		int xx;
-
-		/* Get 4 bytes (one ring entry) at a time */
-		entry = (struct ring_entry *)((caddr_t) outring + prod_ptr);
-
-		/* Invalidate all entries */
-		entry->ring_allsc = 0;
-
-		/* Copy in some bytes */
-		for (xx = 0; (xx < 4) && (len > 0); xx++) {
-			entry->ring_data[xx] = *buf++;
-			entry->ring_sc[xx] = TXCB_VALID;
-			len--;
-			total++;
-		}
-
-		/* If we are within some small threshold of filling up the
-		 * entire ring buffer, we must place an EXPLICIT intr here
-		 * to generate a lowat interrupt in case we subsequently
-		 * really do fill up the ring and the caller goes to sleep.
-		 * No need to place more than one though.
-		 */
-		if (!(port->ip_flags & LOWAT_WRITTEN) &&
-		    ((cons_ptr - prod_ptr) & PROD_CONS_MASK)
-		    <= port->ip_tx_lowat * (int)sizeof(struct ring_entry)) {
-			port->ip_flags |= LOWAT_WRITTEN;
-			entry->ring_sc[0] |= TXCB_INT_WHEN_DONE;
-		}
-
-		/* Go on to next entry */
-		prod_ptr += sizeof(struct ring_entry);
-		prod_ptr &= PROD_CONS_MASK;
-	}
-
-	/* If we sent something, start DMA if necessary */
-	if (total > 0 && !(port->ip_sscr & SSCR_DMA_EN)) {
-		port->ip_sscr |= SSCR_DMA_EN;
-		writel(port->ip_sscr, &port->ip_serial_regs->sscr);
-	}
-
-	/* Store the new producer pointer.  If tx is disabled, we stuff the
-	 * data into the ring buffer, but we don't actually start tx.
-	 */
-	if (!uart_tx_stopped(port->ip_port)) {
-		writel(prod_ptr, &port->ip_serial_regs->stpir);
-
-		/* If we are now transmitting, enable tx_mt interrupt so we
-		 * can disable DMA if necessary when the tx finishes.
-		 */
-		if (total > 0)
-			enable_intrs(port, hooks->intr_tx_mt);
-	}
-	port->ip_tx_prod = prod_ptr;
-
-	return total;
-}
-
-/**
- * disable_intrs - disable interrupts
- * @port: port to enable
- * @mask: mask to use
- */
-static inline void disable_intrs(struct ioc3_port *port, uint32_t mask)
-{
-	if (port->ip_card->ic_enable & mask) {
-		ioc3_disable(port->ip_is, port->ip_idd, mask);
-		port->ip_card->ic_enable &= ~mask;
-	}
-}
-
-/**
- * set_notification - Modify event notification
- * @port: port to use
- * @mask: events mask
- * @set_on: set ?
- */
-static int set_notification(struct ioc3_port *port, int mask, int set_on)
-{
-	struct port_hooks *hooks = port->ip_hooks;
-	uint32_t intrbits, sscrbits;
-
-	BUG_ON(!mask);
-
-	intrbits = sscrbits = 0;
-
-	if (mask & N_DATA_READY)
-		intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high);
-	if (mask & N_OUTPUT_LOWAT)
-		intrbits |= hooks->intr_tx_explicit;
-	if (mask & N_DDCD) {
-		intrbits |= hooks->intr_delta_dcd;
-		sscrbits |= SSCR_RX_RING_DCD;
-	}
-	if (mask & N_DCTS)
-		intrbits |= hooks->intr_delta_cts;
-
-	if (set_on) {
-		enable_intrs(port, intrbits);
-		port->ip_notify |= mask;
-		port->ip_sscr |= sscrbits;
-	} else {
-		disable_intrs(port, intrbits);
-		port->ip_notify &= ~mask;
-		port->ip_sscr &= ~sscrbits;
-	}
-
-	/* We require DMA if either DATA_READY or DDCD notification is
-	 * currently requested. If neither of these is requested and
-	 * there is currently no tx in progress, DMA may be disabled.
-	 */
-	if (port->ip_notify & (N_DATA_READY | N_DDCD))
-		port->ip_sscr |= SSCR_DMA_EN;
-	else if (!(port->ip_card->ic_enable & hooks->intr_tx_mt))
-		port->ip_sscr &= ~SSCR_DMA_EN;
-
-	writel(port->ip_sscr, &port->ip_serial_regs->sscr);
-	return 0;
-}
-
-/**
- * set_mcr - set the master control reg
- * @the_port: port to use
- * @mask1: mcr mask
- * @mask2: shadow mask
- */
-static inline int set_mcr(struct uart_port *the_port,
-			  int mask1, int mask2)
-{
-	struct ioc3_port *port = get_ioc3_port(the_port);
-	uint32_t shadow;
-	int spiniter = 0;
-	char mcr;
-
-	if (!port)
-		return -1;
-
-	/* Pause the DMA interface if necessary */
-	if (port->ip_sscr & SSCR_DMA_EN) {
-		writel(port->ip_sscr | SSCR_DMA_PAUSE,
-		       &port->ip_serial_regs->sscr);
-		while ((readl(&port->ip_serial_regs->sscr)
-			& SSCR_PAUSE_STATE) == 0) {
-			spiniter++;
-			if (spiniter > MAXITER)
-				return -1;
-		}
-	}
-	shadow = readl(&port->ip_serial_regs->shadow);
-	mcr = (shadow & 0xff000000) >> 24;
-
-	/* Set new value */
-	mcr |= mask1;
-	shadow |= mask2;
-	writeb(mcr, &port->ip_uart_regs->iu_mcr);
-	writel(shadow, &port->ip_serial_regs->shadow);
-
-	/* Re-enable the DMA interface if necessary */
-	if (port->ip_sscr & SSCR_DMA_EN) {
-		writel(port->ip_sscr, &port->ip_serial_regs->sscr);
-	}
-	return 0;
-}
-
-/**
- * ioc3_set_proto - set the protocol for the port
- * @port: port to use
- * @proto: protocol to use
- */
-static int ioc3_set_proto(struct ioc3_port *port, int proto)
-{
-	struct port_hooks *hooks = port->ip_hooks;
-
-	switch (proto) {
-	default:
-	case PROTO_RS232:
-		/* Clear the appropriate GIO pin */
-		DPRINT_CONFIG(("%s: rs232\n", __func__));
-		writel(0, (&port->ip_idd->vma->gppr[0]
-					+ hooks->rs422_select_pin));
-		break;
-
-	case PROTO_RS422:
-		/* Set the appropriate GIO pin */
-		DPRINT_CONFIG(("%s: rs422\n", __func__));
-		writel(1, (&port->ip_idd->vma->gppr[0]
-					+ hooks->rs422_select_pin));
-		break;
-	}
-	return 0;
-}
-
-/**
- * transmit_chars - upper level write, called with the_port->lock
- * @the_port: port to write
- */
-static void transmit_chars(struct uart_port *the_port)
-{
-	int xmit_count, tail, head;
-	int result;
-	char *start;
-	struct tty_struct *tty;
-	struct ioc3_port *port = get_ioc3_port(the_port);
-	struct uart_state *state;
-
-	if (!the_port)
-		return;
-	if (!port)
-		return;
-
-	state = the_port->state;
-	tty = state->port.tty;
-
-	if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) {
-		/* Nothing to do or hw stopped */
-		set_notification(port, N_ALL_OUTPUT, 0);
-		return;
-	}
-
-	head = state->xmit.head;
-	tail = state->xmit.tail;
-	start = (char *)&state->xmit.buf[tail];
-
-	/* write out all the data or until the end of the buffer */
-	xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
-	if (xmit_count > 0) {
-		result = do_write(port, start, xmit_count);
-		if (result > 0) {
-			/* booking */
-			xmit_count -= result;
-			the_port->icount.tx += result;
-			/* advance the pointers */
-			tail += result;
-			tail &= UART_XMIT_SIZE - 1;
-			state->xmit.tail = tail;
-			start = (char *)&state->xmit.buf[tail];
-		}
-	}
-	if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(the_port);
-
-	if (uart_circ_empty(&state->xmit)) {
-		set_notification(port, N_OUTPUT_LOWAT, 0);
-	} else {
-		set_notification(port, N_OUTPUT_LOWAT, 1);
-	}
-}
-
-/**
- * ioc3_change_speed - change the speed of the port
- * @the_port: port to change
- * @new_termios: new termios settings
- * @old_termios: old termios settings
- */
-static void
-ioc3_change_speed(struct uart_port *the_port,
-		  struct ktermios *new_termios, struct ktermios *old_termios)
-{
-	struct ioc3_port *port = get_ioc3_port(the_port);
-	unsigned int cflag, iflag;
-	int baud;
-	int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
-	struct uart_state *state = the_port->state;
-
-	cflag = new_termios->c_cflag;
-	iflag = new_termios->c_iflag;
-
-	switch (cflag & CSIZE) {
-	case CS5:
-		new_data = 5;
-		break;
-	case CS6:
-		new_data = 6;
-		break;
-	case CS7:
-		new_data = 7;
-		break;
-	case CS8:
-		new_data = 8;
-		break;
-	default:
-		/* cuz we always need a default ... */
-		new_data = 5;
-		break;
-	}
-	if (cflag & CSTOPB) {
-		new_stop = 1;
-	}
-	if (cflag & PARENB) {
-		new_parity_enable = 1;
-		if (cflag & PARODD)
-			new_parity = 1;
-	}
-	baud = uart_get_baud_rate(the_port, new_termios, old_termios,
-				  MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED);
-	DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __func__, baud,
-				the_port->line));
-
-	if (!the_port->fifosize)
-		the_port->fifosize = FIFO_SIZE;
-	uart_update_timeout(the_port, cflag, baud);
-
-	the_port->ignore_status_mask = N_ALL_INPUT;
-
-	state->port.tty->low_latency = 1;
-
-	if (iflag & IGNPAR)
-		the_port->ignore_status_mask &= ~(N_PARITY_ERROR
-						  | N_FRAMING_ERROR);
-	if (iflag & IGNBRK) {
-		the_port->ignore_status_mask &= ~N_BREAK;
-		if (iflag & IGNPAR)
-			the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
-	}
-	if (!(cflag & CREAD)) {
-		/* ignore everything */
-		the_port->ignore_status_mask &= ~N_DATA_READY;
-	}
-
-	if (cflag & CRTSCTS) {
-		/* enable hardware flow control */
-		port->ip_sscr |= SSCR_HFC_EN;
-	}
-	else {
-		/* disable hardware flow control */
-		port->ip_sscr &= ~SSCR_HFC_EN;
-	}
-	writel(port->ip_sscr, &port->ip_serial_regs->sscr);
-
-	/* Set the configuration and proper notification call */
-	DPRINT_CONFIG(("%s : port 0x%p line %d cflag 0%o "
-		       "config_port(baud %d data %d stop %d penable %d "
-			" parity %d), notification 0x%x\n",
-		       __func__, (void *)port, the_port->line, cflag, baud,
-		       new_data, new_stop, new_parity_enable, new_parity,
-		       the_port->ignore_status_mask));
-
-	if ((config_port(port, baud,	/* baud */
-			 new_data,	/* byte size */
-			 new_stop,	/* stop bits */
-			 new_parity_enable,	/* set parity */
-			 new_parity)) >= 0) {	/* parity 1==odd */
-		set_notification(port, the_port->ignore_status_mask, 1);
-	}
-}
-
-/**
- * ic3_startup_local - Start up the serial port - returns >= 0 if no errors
- * @the_port: Port to operate on
- */
-static inline int ic3_startup_local(struct uart_port *the_port)
-{
-	struct ioc3_port *port;
-
-	if (!the_port) {
-		NOT_PROGRESS();
-		return -1;
-	}
-
-	port = get_ioc3_port(the_port);
-	if (!port) {
-		NOT_PROGRESS();
-		return -1;
-	}
-
-	local_open(port);
-
-	/* set the protocol */
-	ioc3_set_proto(port, IS_RS232(the_port->line) ? PROTO_RS232 :
-							PROTO_RS422);
-	return 0;
-}
-
-/*
- * ioc3_cb_output_lowat - called when the output low water mark is hit
- * @port: port to output
- */
-static void ioc3_cb_output_lowat(struct ioc3_port *port)
-{
-	unsigned long pflags;
-
-	/* the_port->lock is set on the call here */
-	if (port->ip_port) {
-		spin_lock_irqsave(&port->ip_port->lock, pflags);
-		transmit_chars(port->ip_port);
-		spin_unlock_irqrestore(&port->ip_port->lock, pflags);
-	}
-}
-
-/*
- * ioc3_cb_post_ncs - called for some basic errors
- * @port: port to use
- * @ncs: event
- */
-static void ioc3_cb_post_ncs(struct uart_port *the_port, int ncs)
-{
-	struct uart_icount *icount;
-
-	icount = &the_port->icount;
-
-	if (ncs & NCS_BREAK)
-		icount->brk++;
-	if (ncs & NCS_FRAMING)
-		icount->frame++;
-	if (ncs & NCS_OVERRUN)
-		icount->overrun++;
-	if (ncs & NCS_PARITY)
-		icount->parity++;
-}
-
-/**
- * do_read - Read in bytes from the port.  Return the number of bytes
- *			actually read.
- * @the_port: port to use
- * @buf: place to put the stuff we read
- * @len: how big 'buf' is
- */
-
-static inline int do_read(struct uart_port *the_port, char *buf, int len)
-{
-	int prod_ptr, cons_ptr, total;
-	struct ioc3_port *port = get_ioc3_port(the_port);
-	struct ring *inring;
-	struct ring_entry *entry;
-	struct port_hooks *hooks = port->ip_hooks;
-	int byte_num;
-	char *sc;
-	int loop_counter;
-
-	BUG_ON(!(len >= 0));
-	BUG_ON(!port);
-
-	/* There is a nasty timing issue in the IOC3. When the rx_timer
-	 * expires or the rx_high condition arises, we take an interrupt.
-	 * At some point while servicing the interrupt, we read bytes from
-	 * the ring buffer and re-arm the rx_timer.  However the rx_timer is
-	 * not started until the first byte is received *after* it is armed,
-	 * and any bytes pending in the rx construction buffers are not drained
-	 * to memory until either there are 4 bytes available or the rx_timer
-	 * expires.  This leads to a potential situation where data is left
-	 * in the construction buffers forever - 1 to 3 bytes were received
-	 * after the interrupt was generated but before the rx_timer was
-	 * re-armed. At that point as long as no subsequent bytes are received
-	 * the timer will never be started and the bytes will remain in the
-	 * construction buffer forever.  The solution is to execute a DRAIN
-	 * command after rearming the timer.  This way any bytes received before
-	 * the DRAIN will be drained to memory, and any bytes received after
-	 * the DRAIN will start the TIMER and be drained when it expires.
-	 * Luckily, this only needs to be done when the DMA buffer is empty
-	 * since there is no requirement that this function return all
-	 * available data as long as it returns some.
-	 */
-	/* Re-arm the timer */
-
-	writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir);
-
-	prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
-	cons_ptr = port->ip_rx_cons;
-
-	if (prod_ptr == cons_ptr) {
-		int reset_dma = 0;
-
-		/* Input buffer appears empty, do a flush. */
-
-		/* DMA must be enabled for this to work. */
-		if (!(port->ip_sscr & SSCR_DMA_EN)) {
-			port->ip_sscr |= SSCR_DMA_EN;
-			reset_dma = 1;
-		}
-
-		/* Potential race condition: we must reload the srpir after
-		 * issuing the drain command, otherwise we could think the rx
-		 * buffer is empty, then take a very long interrupt, and when
-		 * we come back it's full and we wait forever for the drain to
-		 * complete.
-		 */
-		writel(port->ip_sscr | SSCR_RX_DRAIN,
-		       &port->ip_serial_regs->sscr);
-		prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
-
-		/* We must not wait for the DRAIN to complete unless there are
-		 * at least 8 bytes (2 ring entries) available to receive the
-		 * data otherwise the DRAIN will never complete and we'll
-		 * deadlock here.
-		 * In fact, to make things easier, I'll just ignore the flush if
-		 * there is any data at all now available.
-		 */
-		if (prod_ptr == cons_ptr) {
-			loop_counter = 0;
-			while (readl(&port->ip_serial_regs->sscr) &
-			       SSCR_RX_DRAIN) {
-				loop_counter++;
-				if (loop_counter > MAXITER)
-					return -1;
-			}
-
-			/* SIGH. We have to reload the prod_ptr *again* since
-			 * the drain may have caused it to change
-			 */
-			prod_ptr = readl(&port->ip_serial_regs->srpir)
-			    & PROD_CONS_MASK;
-		}
-		if (reset_dma) {
-			port->ip_sscr &= ~SSCR_DMA_EN;
-			writel(port->ip_sscr, &port->ip_serial_regs->sscr);
-		}
-	}
-	inring = port->ip_inring;
-	port->ip_flags &= ~READ_ABORTED;
-
-	total = 0;
-	loop_counter = 0xfffff;	/* to avoid hangs */
-
-	/* Grab bytes from the hardware */
-	while ((prod_ptr != cons_ptr) && (len > 0)) {
-		entry = (struct ring_entry *)((caddr_t) inring + cons_ptr);
-
-		if (loop_counter-- <= 0) {
-			printk(KERN_WARNING "IOC3 serial: "
-			       "possible hang condition/"
-			       "port stuck on read (line %d).\n",
-				the_port->line);
-			break;
-		}
-
-		/* According to the producer pointer, this ring entry
-		 * must contain some data.  But if the PIO happened faster
-		 * than the DMA, the data may not be available yet, so let's
-		 * wait until it arrives.
-		 */
-		if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
-			/* Indicate the read is aborted so we don't disable
-			 * the interrupt thinking that the consumer is
-			 * congested.
-			 */
-			port->ip_flags |= READ_ABORTED;
-			len = 0;
-			break;
-		}
-
-		/* Load the bytes/status out of the ring entry */
-		for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) {
-			sc = &(entry->ring_sc[byte_num]);
-
-			/* Check for change in modem state or overrun */
-			if ((*sc & RXSB_MODEM_VALID)
-			    && (port->ip_notify & N_DDCD)) {
-				/* Notify upper layer if DCD dropped */
-				if ((port->ip_flags & DCD_ON)
-				    && !(*sc & RXSB_DCD)) {
-					/* If we have already copied some data,
-					 * return it.  We'll pick up the carrier
-					 * drop on the next pass.  That way we
-					 * don't throw away the data that has
-					 * already been copied back to
-					 * the caller's buffer.
-					 */
-					if (total > 0) {
-						len = 0;
-						break;
-					}
-					port->ip_flags &= ~DCD_ON;
-
-					/* Turn off this notification so the
-					 * carrier drop protocol won't see it
-					 * again when it does a read.
-					 */
-					*sc &= ~RXSB_MODEM_VALID;
-
-					/* To keep things consistent, we need
-					 * to update the consumer pointer so
-					 * the next reader won't come in and
-					 * try to read the same ring entries
-					 * again. This must be done here before
-					 * the dcd change.
-					 */
-
-					if ((entry->ring_allsc & RING_ANY_VALID)
-					    == 0) {
-						cons_ptr += (int)sizeof
-						    (struct ring_entry);
-						cons_ptr &= PROD_CONS_MASK;
-					}
-					writel(cons_ptr,
-					       &port->ip_serial_regs->srcir);
-					port->ip_rx_cons = cons_ptr;
-
-					/* Notify upper layer of carrier drop */
-					if ((port->ip_notify & N_DDCD)
-					    && port->ip_port) {
-						uart_handle_dcd_change
-							(port->ip_port, 0);
-						wake_up_interruptible
-						    (&the_port->state->
-						     port.delta_msr_wait);
-					}
-
-					/* If we had any data to return, we
-					 * would have returned it above.
-					 */
-					return 0;
-				}
-			}
-			if (*sc & RXSB_MODEM_VALID) {
-				/* Notify that an input overrun occurred */
-				if ((*sc & RXSB_OVERRUN)
-				    && (port->ip_notify & N_OVERRUN_ERROR)) {
-					ioc3_cb_post_ncs(the_port, NCS_OVERRUN);
-				}
-				/* Don't look at this byte again */
-				*sc &= ~RXSB_MODEM_VALID;
-			}
-
-			/* Check for valid data or RX errors */
-			if ((*sc & RXSB_DATA_VALID) &&
-			    ((*sc & (RXSB_PAR_ERR
-				     | RXSB_FRAME_ERR | RXSB_BREAK))
-			     && (port->ip_notify & (N_PARITY_ERROR
-						    | N_FRAMING_ERROR
-						    | N_BREAK)))) {
-				/* There is an error condition on the next byte.
-				 * If we have already transferred some bytes,
-				 * we'll stop here. Otherwise if this is the
-				 * first byte to be read, we'll just transfer
-				 * it alone after notifying the
-				 * upper layer of its status.
-				 */
-				if (total > 0) {
-					len = 0;
-					break;
-				} else {
-					if ((*sc & RXSB_PAR_ERR) &&
-					    (port->
-					     ip_notify & N_PARITY_ERROR)) {
-						ioc3_cb_post_ncs(the_port,
-								 NCS_PARITY);
-					}
-					if ((*sc & RXSB_FRAME_ERR) &&
-					    (port->
-					     ip_notify & N_FRAMING_ERROR)) {
-						ioc3_cb_post_ncs(the_port,
-								 NCS_FRAMING);
-					}
-					if ((*sc & RXSB_BREAK)
-					    && (port->ip_notify & N_BREAK)) {
-						ioc3_cb_post_ncs
-						    (the_port, NCS_BREAK);
-					}
-					len = 1;
-				}
-			}
-			if (*sc & RXSB_DATA_VALID) {
-				*sc &= ~RXSB_DATA_VALID;
-				*buf = entry->ring_data[byte_num];
-				buf++;
-				len--;
-				total++;
-			}
-		}
-
-		/* If we used up this entry entirely, go on to the next one,
-		 * otherwise we must have run out of buffer space, so
-		 * leave the consumer pointer here for the next read in case
-		 * there are still unread bytes in this entry.
-		 */
-		if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
-			cons_ptr += (int)sizeof(struct ring_entry);
-			cons_ptr &= PROD_CONS_MASK;
-		}
-	}
-
-	/* Update consumer pointer and re-arm rx timer interrupt */
-	writel(cons_ptr, &port->ip_serial_regs->srcir);
-	port->ip_rx_cons = cons_ptr;
-
-	/* If we have now dipped below the rx high water mark and we have
-	 * rx_high interrupt turned off, we can now turn it back on again.
-	 */
-	if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr)
-					       & PROD_CONS_MASK) <
-					      ((port->
-						ip_sscr &
-						SSCR_RX_THRESHOLD)
-					       << PROD_CONS_PTR_OFF))) {
-		port->ip_flags &= ~INPUT_HIGH;
-		enable_intrs(port, hooks->intr_rx_high);
-	}
-	return total;
-}
-
-/**
- * receive_chars - upper level read.
- * @the_port: port to read from
- */
-static int receive_chars(struct uart_port *the_port)
-{
-	struct tty_struct *tty;
-	unsigned char ch[MAX_CHARS];
-	int read_count = 0, read_room, flip = 0;
-	struct uart_state *state = the_port->state;
-	struct ioc3_port *port = get_ioc3_port(the_port);
-	unsigned long pflags;
-
-	/* Make sure all the pointers are "good" ones */
-	if (!state)
-		return 0;
-	if (!state->port.tty)
-		return 0;
-
-	if (!(port->ip_flags & INPUT_ENABLE))
-		return 0;
-
-	spin_lock_irqsave(&the_port->lock, pflags);
-	tty = state->port.tty;
-
-	read_count = do_read(the_port, ch, MAX_CHARS);
-	if (read_count > 0) {
-		flip = 1;
-		read_room = tty_insert_flip_string(tty, ch, read_count);
-		the_port->icount.rx += read_count;
-	}
-	spin_unlock_irqrestore(&the_port->lock, pflags);
-
-	if (flip)
-		tty_flip_buffer_push(tty);
-
-	return read_count;
-}
-
-/**
- * ioc3uart_intr_one - lowest level (per port) interrupt handler.
- * @is : submodule
- * @idd: driver data
- * @pending: interrupts to handle
- */
-
-static int inline
-ioc3uart_intr_one(struct ioc3_submodule *is,
-			struct ioc3_driver_data *idd,
-			unsigned int pending)
-{
-	int port_num = GET_PORT_FROM_SIO_IR(pending);
-	struct port_hooks *hooks;
-	unsigned int rx_high_rd_aborted = 0;
-	unsigned long flags;
-	struct uart_port *the_port;
-	struct ioc3_port *port;
-	int loop_counter;
-	struct ioc3_card *card_ptr;
-	unsigned int sio_ir;
-
-	card_ptr = idd->data[is->id];
-	port = card_ptr->ic_port[port_num].icp_port;
-	hooks = port->ip_hooks;
-
-	/* Possible race condition here: The tx_mt interrupt bit may be
-	 * cleared without the intervention of the interrupt handler,
-	 * e.g. by a write.  If the top level interrupt handler reads a
-	 * tx_mt, then some other processor does a write, starting up
-	 * output, then we come in here, see the tx_mt and stop DMA, the
-	 * output started by the other processor will hang.  Thus we can
-	 * only rely on tx_mt being legitimate if it is read while the
-	 * port lock is held.  Therefore this bit must be ignored in the
-	 * passed in interrupt mask which was read by the top level
-	 * interrupt handler since the port lock was not held at the time
-	 * it was read.  We can only rely on this bit being accurate if it
-	 * is read while the port lock is held.  So we'll clear it for now,
-	 * and reload it later once we have the port lock.
-	 */
-
-	sio_ir = pending & ~(hooks->intr_tx_mt);
-	spin_lock_irqsave(&port->ip_lock, flags);
-
-	loop_counter = MAXITER;	/* to avoid hangs */
-
-	do {
-		uint32_t shadow;
-
-		if (loop_counter-- <= 0) {
-			printk(KERN_WARNING "IOC3 serial: "
-			       "possible hang condition/"
-			       "port stuck on interrupt (line %d).\n",
-				((struct uart_port *)port->ip_port)->line);
-			break;
-		}
-		/* Handle a DCD change */
-		if (sio_ir & hooks->intr_delta_dcd) {
-			ioc3_ack(is, idd, hooks->intr_delta_dcd);
-			shadow = readl(&port->ip_serial_regs->shadow);
-
-			if ((port->ip_notify & N_DDCD)
-			    && (shadow & SHADOW_DCD)
-			    && (port->ip_port)) {
-				the_port = port->ip_port;
-				uart_handle_dcd_change(the_port,
-						shadow & SHADOW_DCD);
-				wake_up_interruptible
-				    (&the_port->state->port.delta_msr_wait);
-			} else if ((port->ip_notify & N_DDCD)
-				   && !(shadow & SHADOW_DCD)) {
-				/* Flag delta DCD/no DCD */
-				uart_handle_dcd_change(port->ip_port,
-						shadow & SHADOW_DCD);
-				port->ip_flags |= DCD_ON;
-			}
-		}
-
-		/* Handle a CTS change */
-		if (sio_ir & hooks->intr_delta_cts) {
-			ioc3_ack(is, idd, hooks->intr_delta_cts);
-			shadow = readl(&port->ip_serial_regs->shadow);
-
-			if ((port->ip_notify & N_DCTS) && (port->ip_port)) {
-				the_port = port->ip_port;
-				uart_handle_cts_change(the_port, shadow
-						& SHADOW_CTS);
-				wake_up_interruptible
-				    (&the_port->state->port.delta_msr_wait);
-			}
-		}
-
-		/* rx timeout interrupt.  Must be some data available.  Put this
-		 * before the check for rx_high since servicing this condition
-		 * may cause that condition to clear.
-		 */
-		if (sio_ir & hooks->intr_rx_timer) {
-			ioc3_ack(is, idd, hooks->intr_rx_timer);
-			if ((port->ip_notify & N_DATA_READY)
-						&& (port->ip_port)) {
-				receive_chars(port->ip_port);
-			}
-		}
-
-		/* rx high interrupt. Must be after rx_timer.  */
-		else if (sio_ir & hooks->intr_rx_high) {
-			/* Data available, notify upper layer */
-			if ((port->ip_notify & N_DATA_READY) && port->ip_port) {
-				receive_chars(port->ip_port);
-			}
-
-			/* We can't ACK this interrupt.  If receive_chars didn't
-			 * cause the condition to clear, we'll have to disable
-			 * the interrupt until the data is drained.
-			 * If the read was aborted, don't disable the interrupt
-			 * as this may cause us to hang indefinitely.  An
-			 * aborted read generally means that this interrupt
-			 * hasn't been delivered to the cpu yet anyway, even
-			 * though we see it as asserted when we read the sio_ir.
-			 */
-			if ((sio_ir = PENDING(card_ptr, idd))
-					& hooks->intr_rx_high) {
-				if (port->ip_flags & READ_ABORTED) {
-					rx_high_rd_aborted++;
-				}
-				else {
-					card_ptr->ic_enable &= ~hooks->intr_rx_high;
-					port->ip_flags |= INPUT_HIGH;
-				}
-			}
-		}
-
-		/* We got a low water interrupt: notify upper layer to
-		 * send more data.  Must come before tx_mt since servicing
-		 * this condition may cause that condition to clear.
-		 */
-		if (sio_ir & hooks->intr_tx_explicit) {
-			port->ip_flags &= ~LOWAT_WRITTEN;
-			ioc3_ack(is, idd, hooks->intr_tx_explicit);
-			if (port->ip_notify & N_OUTPUT_LOWAT)
-				ioc3_cb_output_lowat(port);
-		}
-
-		/* Handle tx_mt.  Must come after tx_explicit.  */
-		else if (sio_ir & hooks->intr_tx_mt) {
-			/* If we are expecting a lowat notification
-			 * and we get to this point it probably means that for
-			 * some reason the tx_explicit didn't work as expected
-			 * (that can legitimately happen if the output buffer is
-			 * filled up in just the right way).
-			 * So send the notification now.
-			 */
-			if (port->ip_notify & N_OUTPUT_LOWAT) {
-				ioc3_cb_output_lowat(port);
-
-				/* We need to reload the sio_ir since the lowat
-				 * call may have caused another write to occur,
-				 * clearing the tx_mt condition.
-				 */
-				sio_ir = PENDING(card_ptr, idd);
-			}
-
-			/* If the tx_mt condition still persists even after the
-			 * lowat call, we've got some work to do.
-			 */
-			if (sio_ir & hooks->intr_tx_mt) {
-				/* If we are not currently expecting DMA input,
-				 * and the transmitter has just gone idle,
-				 * there is no longer any reason for DMA, so
-				 * disable it.
-				 */
-				if (!(port->ip_notify
-				      & (N_DATA_READY | N_DDCD))) {
-					BUG_ON(!(port->ip_sscr
-						 & SSCR_DMA_EN));
-					port->ip_sscr &= ~SSCR_DMA_EN;
-					writel(port->ip_sscr,
-					       &port->ip_serial_regs->sscr);
-				}
-				/* Prevent infinite tx_mt interrupt */
-				card_ptr->ic_enable &= ~hooks->intr_tx_mt;
-			}
-		}
-		sio_ir = PENDING(card_ptr, idd);
-
-		/* if the read was aborted and only hooks->intr_rx_high,
-		 * clear hooks->intr_rx_high, so we do not loop forever.
-		 */
-
-		if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) {
-			sio_ir &= ~hooks->intr_rx_high;
-		}
-	} while (sio_ir & hooks->intr_all);
-
-	spin_unlock_irqrestore(&port->ip_lock, flags);
-	ioc3_enable(is, idd, card_ptr->ic_enable);
-	return 0;
-}
-
-/**
- * ioc3uart_intr - field all serial interrupts
- * @is : submodule
- * @idd: driver data
- * @pending: interrupts to handle
- *
- */
-
-static int ioc3uart_intr(struct ioc3_submodule *is,
-			struct ioc3_driver_data *idd,
-			unsigned int pending)
-{
-	int ret = 0;
-
-	/*
-	 * The upper level interrupt handler sends interrupts for both ports
-	 * here. So we need to call for each port with its interrupts.
-	 */
-
-	if (pending & SIO_IR_SA)
-		ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SA);
-	if (pending & SIO_IR_SB)
-		ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SB);
-
-	return ret;
-}
-
-/**
- * ic3_type
- * @port: Port to operate with (we ignore since we only have one port)
- *
- */
-static const char *ic3_type(struct uart_port *the_port)
-{
-	if (IS_RS232(the_port->line))
-		return "SGI IOC3 Serial [rs232]";
-	else
-		return "SGI IOC3 Serial [rs422]";
-}
-
-/**
- * ic3_tx_empty - Is the transmitter empty?
- * @port: Port to operate on
- *
- */
-static unsigned int ic3_tx_empty(struct uart_port *the_port)
-{
-	unsigned int ret = 0;
-	struct ioc3_port *port = get_ioc3_port(the_port);
-
-	if (readl(&port->ip_serial_regs->shadow) & SHADOW_TEMT)
-		ret = TIOCSER_TEMT;
-	return ret;
-}
-
-/**
- * ic3_stop_tx - stop the transmitter
- * @port: Port to operate on
- *
- */
-static void ic3_stop_tx(struct uart_port *the_port)
-{
-	struct ioc3_port *port = get_ioc3_port(the_port);
-
-	if (port)
-		set_notification(port, N_OUTPUT_LOWAT, 0);
-}
-
-/**
- * ic3_stop_rx - stop the receiver
- * @port: Port to operate on
- *
- */
-static void ic3_stop_rx(struct uart_port *the_port)
-{
-	struct ioc3_port *port = get_ioc3_port(the_port);
-
-	if (port)
-		port->ip_flags &= ~INPUT_ENABLE;
-}
-
-/**
- * null_void_function
- * @port: Port to operate on
- *
- */
-static void null_void_function(struct uart_port *the_port)
-{
-}
-
-/**
- * ic3_shutdown - shut down the port - free irq and disable
- * @port: port to shut down
- *
- */
-static void ic3_shutdown(struct uart_port *the_port)
-{
-	unsigned long port_flags;
-	struct ioc3_port *port;
-	struct uart_state *state;
-
-	port = get_ioc3_port(the_port);
-	if (!port)
-		return;
-
-	state = the_port->state;
-	wake_up_interruptible(&state->port.delta_msr_wait);
-
-	spin_lock_irqsave(&the_port->lock, port_flags);
-	set_notification(port, N_ALL, 0);
-	spin_unlock_irqrestore(&the_port->lock, port_flags);
-}
-
-/**
- * ic3_set_mctrl - set control lines (dtr, rts, etc)
- * @port: Port to operate on
- * @mctrl: Lines to set/unset
- *
- */
-static void ic3_set_mctrl(struct uart_port *the_port, unsigned int mctrl)
-{
-	unsigned char mcr = 0;
-
-	if (mctrl & TIOCM_RTS)
-		mcr |= UART_MCR_RTS;
-	if (mctrl & TIOCM_DTR)
-		mcr |= UART_MCR_DTR;
-	if (mctrl & TIOCM_OUT1)
-		mcr |= UART_MCR_OUT1;
-	if (mctrl & TIOCM_OUT2)
-		mcr |= UART_MCR_OUT2;
-	if (mctrl & TIOCM_LOOP)
-		mcr |= UART_MCR_LOOP;
-
-	set_mcr(the_port, mcr, SHADOW_DTR);
-}
-
-/**
- * ic3_get_mctrl - get control line info
- * @port: port to operate on
- *
- */
-static unsigned int ic3_get_mctrl(struct uart_port *the_port)
-{
-	struct ioc3_port *port = get_ioc3_port(the_port);
-	uint32_t shadow;
-	unsigned int ret = 0;
-
-	if (!port)
-		return 0;
-
-	shadow = readl(&port->ip_serial_regs->shadow);
-	if (shadow & SHADOW_DCD)
-		ret |= TIOCM_CD;
-	if (shadow & SHADOW_DR)
-		ret |= TIOCM_DSR;
-	if (shadow & SHADOW_CTS)
-		ret |= TIOCM_CTS;
-	return ret;
-}
-
-/**
- * ic3_start_tx - Start transmitter. Called with the_port->lock
- * @port: Port to operate on
- *
- */
-static void ic3_start_tx(struct uart_port *the_port)
-{
-	struct ioc3_port *port = get_ioc3_port(the_port);
-
-	if (port) {
-		set_notification(port, N_OUTPUT_LOWAT, 1);
-		enable_intrs(port, port->ip_hooks->intr_tx_mt);
-	}
-}
-
-/**
- * ic3_break_ctl - handle breaks
- * @port: Port to operate on
- * @break_state: Break state
- *
- */
-static void ic3_break_ctl(struct uart_port *the_port, int break_state)
-{
-}
-
-/**
- * ic3_startup - Start up the serial port - always return 0 (We're always on)
- * @port: Port to operate on
- *
- */
-static int ic3_startup(struct uart_port *the_port)
-{
-	int retval;
-	struct ioc3_port *port;
-	struct ioc3_card *card_ptr;
-	unsigned long port_flags;
-
-	if (!the_port) {
-		NOT_PROGRESS();
-		return -ENODEV;
-	}
-	port = get_ioc3_port(the_port);
-	if (!port) {
-		NOT_PROGRESS();
-		return -ENODEV;
-	}
-	card_ptr = port->ip_card;
-	port->ip_port = the_port;
-
-	if (!card_ptr) {
-		NOT_PROGRESS();
-		return -ENODEV;
-	}
-
-	/* Start up the serial port */
-	spin_lock_irqsave(&the_port->lock, port_flags);
-	retval = ic3_startup_local(the_port);
-	spin_unlock_irqrestore(&the_port->lock, port_flags);
-	return retval;
-}
-
-/**
- * ic3_set_termios - set termios stuff
- * @port: port to operate on
- * @termios: New settings
- * @termios: Old
- *
- */
-static void
-ic3_set_termios(struct uart_port *the_port,
-		struct ktermios *termios, struct ktermios *old_termios)
-{
-	unsigned long port_flags;
-
-	spin_lock_irqsave(&the_port->lock, port_flags);
-	ioc3_change_speed(the_port, termios, old_termios);
-	spin_unlock_irqrestore(&the_port->lock, port_flags);
-}
-
-/**
- * ic3_request_port - allocate resources for port - no op....
- * @port: port to operate on
- *
- */
-static int ic3_request_port(struct uart_port *port)
-{
-	return 0;
-}
-
-/* Associate the uart functions above - given to serial core */
-static struct uart_ops ioc3_ops = {
-	.tx_empty = ic3_tx_empty,
-	.set_mctrl = ic3_set_mctrl,
-	.get_mctrl = ic3_get_mctrl,
-	.stop_tx = ic3_stop_tx,
-	.start_tx = ic3_start_tx,
-	.stop_rx = ic3_stop_rx,
-	.enable_ms = null_void_function,
-	.break_ctl = ic3_break_ctl,
-	.startup = ic3_startup,
-	.shutdown = ic3_shutdown,
-	.set_termios = ic3_set_termios,
-	.type = ic3_type,
-	.release_port = null_void_function,
-	.request_port = ic3_request_port,
-};
-
-/*
- * Boot-time initialization code
- */
-
-static struct uart_driver ioc3_uart = {
-	.owner = THIS_MODULE,
-	.driver_name = "ioc3_serial",
-	.dev_name = DEVICE_NAME,
-	.major = DEVICE_MAJOR,
-	.minor = DEVICE_MINOR,
-	.nr = MAX_LOGICAL_PORTS
-};
-
-/**
- * ioc3_serial_core_attach - register with serial core
- *		This is done during pci probing
- * @is: submodule struct for this
- * @idd: handle for this card
- */
-static inline int ioc3_serial_core_attach( struct ioc3_submodule *is,
-				struct ioc3_driver_data *idd)
-{
-	struct ioc3_port *port;
-	struct uart_port *the_port;
-	struct ioc3_card *card_ptr = idd->data[is->id];
-	int ii, phys_port;
-	struct pci_dev *pdev = idd->pdev;
-
-	DPRINT_CONFIG(("%s: attach pdev 0x%p - card_ptr 0x%p\n",
-		       __func__, pdev, (void *)card_ptr));
-
-	if (!card_ptr)
-		return -ENODEV;
-
-	/* once around for each logical port on this card */
-	for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) {
-		phys_port = GET_PHYSICAL_PORT(ii);
-		the_port = &card_ptr->ic_port[phys_port].
-				icp_uart_port[GET_LOGICAL_PORT(ii)];
-		port = card_ptr->ic_port[phys_port].icp_port;
-		port->ip_port = the_port;
-
-		DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p [%d/%d]\n",
-			__func__, (void *)the_port, (void *)port,
-				phys_port, ii));
-
-		/* membase, iobase and mapbase just need to be non-0 */
-		the_port->membase = (unsigned char __iomem *)1;
-		the_port->iobase = (pdev->bus->number << 16) |  ii;
-		the_port->line = (Num_of_ioc3_cards << 2) | ii;
-		the_port->mapbase = 1;
-		the_port->type = PORT_16550A;
-		the_port->fifosize = FIFO_SIZE;
-		the_port->ops = &ioc3_ops;
-		the_port->irq = idd->irq_io;
-		the_port->dev = &pdev->dev;
-
-		if (uart_add_one_port(&ioc3_uart, the_port) < 0) {
-			printk(KERN_WARNING
-		          "%s: unable to add port %d bus %d\n",
-			       __func__, the_port->line, pdev->bus->number);
-		} else {
-			DPRINT_CONFIG(("IOC3 serial port %d irq %d bus %d\n",
-		          the_port->line, the_port->irq, pdev->bus->number));
-		}
-
-		/* all ports are rs232 for now */
-		if (IS_PHYSICAL_PORT(ii))
-			ioc3_set_proto(port, PROTO_RS232);
-	}
-	return 0;
-}
-
-/**
- * ioc3uart_remove - register detach function
- * @is: submodule struct for this submodule
- * @idd: ioc3 driver data for this submodule
- */
-
-static int ioc3uart_remove(struct ioc3_submodule *is,
-			struct ioc3_driver_data *idd)
-{
-	struct ioc3_card *card_ptr = idd->data[is->id];
-	struct uart_port *the_port;
-	struct ioc3_port *port;
-	int ii;
-
-	if (card_ptr) {
-		for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) {
-			the_port = &card_ptr->ic_port[GET_PHYSICAL_PORT(ii)].
-					icp_uart_port[GET_LOGICAL_PORT(ii)];
-			if (the_port)
-				uart_remove_one_port(&ioc3_uart, the_port);
-			port = card_ptr->ic_port[GET_PHYSICAL_PORT(ii)].icp_port;
-			if (port && IS_PHYSICAL_PORT(ii)
-					&& (GET_PHYSICAL_PORT(ii) == 0)) {
-				pci_free_consistent(port->ip_idd->pdev,
-					TOTAL_RING_BUF_SIZE,
-					(void *)port->ip_cpu_ringbuf,
-					port->ip_dma_ringbuf);
-				kfree(port);
-				card_ptr->ic_port[GET_PHYSICAL_PORT(ii)].
-							icp_port = NULL;
-			}
-		}
-		kfree(card_ptr);
-		idd->data[is->id] = NULL;
-	}
-	return 0;
-}
-
-/**
- * ioc3uart_probe - card probe function called from shim driver
- * @is: submodule struct for this submodule
- * @idd: ioc3 driver data for this card
- */
-
-static int __devinit
-ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
-{
-	struct pci_dev *pdev = idd->pdev;
-	struct ioc3_card *card_ptr;
-	int ret = 0;
-	struct ioc3_port *port;
-	struct ioc3_port *ports[PORTS_PER_CARD];
-	int phys_port;
-	int cnt;
-
-	DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd));
-
-	card_ptr = kzalloc(sizeof(struct ioc3_card), GFP_KERNEL);
-	if (!card_ptr) {
-		printk(KERN_WARNING "ioc3_attach_one"
-		       ": unable to get memory for the IOC3\n");
-		return -ENOMEM;
-	}
-	idd->data[is->id] = card_ptr;
-	Submodule_slot = is->id;
-
-	writel(((UARTA_BASE >> 3) << SIO_CR_SER_A_BASE_SHIFT) |
-		((UARTB_BASE >> 3) << SIO_CR_SER_B_BASE_SHIFT) |
-		(0xf << SIO_CR_CMD_PULSE_SHIFT), &idd->vma->sio_cr);
-
-	pci_write_config_dword(pdev, PCI_LAT, 0xff00);
-
-	/* Enable serial port mode select generic PIO pins as outputs */
-	ioc3_gpcr_set(idd, GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL);
-
-	/* Create port structures for each port */
-	for (phys_port = 0; phys_port < PORTS_PER_CARD; phys_port++) {
-		port = kzalloc(sizeof(struct ioc3_port), GFP_KERNEL);
-		if (!port) {
-			printk(KERN_WARNING
-			       "IOC3 serial memory not available for port\n");
-			ret = -ENOMEM;
-			goto out4;
-		}
-		spin_lock_init(&port->ip_lock);
-
-		/* we need to remember the previous ones, to point back to
-		 * them farther down - setting up the ring buffers.
-		 */
-		ports[phys_port] = port;
-
-		/* init to something useful */
-		card_ptr->ic_port[phys_port].icp_port = port;
-		port->ip_is = is;
-		port->ip_idd = idd;
-		port->ip_baud = 9600;
-		port->ip_card = card_ptr;
-		port->ip_hooks = &hooks_array[phys_port];
-
-		/* Setup each port */
-		if (phys_port == 0) {
-			port->ip_serial_regs = &idd->vma->port_a;
-			port->ip_uart_regs = &idd->vma->sregs.uarta;
-
-			DPRINT_CONFIG(("%s : Port A ip_serial_regs 0x%p "
-				       "ip_uart_regs 0x%p\n",
-				       __func__,
-				       (void *)port->ip_serial_regs,
-				       (void *)port->ip_uart_regs));
-
-			/* setup ring buffers */
-			port->ip_cpu_ringbuf = pci_alloc_consistent(pdev,
-				TOTAL_RING_BUF_SIZE, &port->ip_dma_ringbuf);
-
-			BUG_ON(!((((int64_t) port->ip_dma_ringbuf) &
-				  (TOTAL_RING_BUF_SIZE - 1)) == 0));
-			port->ip_inring = RING(port, RX_A);
-			port->ip_outring = RING(port, TX_A);
-			DPRINT_CONFIG(("%s : Port A ip_cpu_ringbuf 0x%p "
-				       "ip_dma_ringbuf 0x%p, ip_inring 0x%p "
-					"ip_outring 0x%p\n",
-				       __func__,
-				       (void *)port->ip_cpu_ringbuf,
-				       (void *)port->ip_dma_ringbuf,
-				       (void *)port->ip_inring,
-				       (void *)port->ip_outring));
-		}
-		else {
-			port->ip_serial_regs = &idd->vma->port_b;
-			port->ip_uart_regs = &idd->vma->sregs.uartb;
-
-			DPRINT_CONFIG(("%s : Port B ip_serial_regs 0x%p "
-				       "ip_uart_regs 0x%p\n",
-				       __func__,
-				       (void *)port->ip_serial_regs,
-				       (void *)port->ip_uart_regs));
-
-			/* share the ring buffers */
-			port->ip_dma_ringbuf =
-			    ports[phys_port - 1]->ip_dma_ringbuf;
-			port->ip_cpu_ringbuf =
-			    ports[phys_port - 1]->ip_cpu_ringbuf;
-			port->ip_inring = RING(port, RX_B);
-			port->ip_outring = RING(port, TX_B);
-			DPRINT_CONFIG(("%s : Port B ip_cpu_ringbuf 0x%p "
-				       "ip_dma_ringbuf 0x%p, ip_inring 0x%p "
-					"ip_outring 0x%p\n",
-				       __func__,
-				       (void *)port->ip_cpu_ringbuf,
-				       (void *)port->ip_dma_ringbuf,
-				       (void *)port->ip_inring,
-				       (void *)port->ip_outring));
-		}
-
-		DPRINT_CONFIG(("%s : port %d [addr 0x%p] card_ptr 0x%p",
-			       __func__,
-			       phys_port, (void *)port, (void *)card_ptr));
-		DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n",
-			       (void *)port->ip_serial_regs,
-			       (void *)port->ip_uart_regs));
-
-		/* Initialize the hardware for IOC3 */
-		port_init(port);
-
-		DPRINT_CONFIG(("%s: phys_port %d port 0x%p inring 0x%p "
-			       "outring 0x%p\n",
-			       __func__,
-			       phys_port, (void *)port,
-			       (void *)port->ip_inring,
-			       (void *)port->ip_outring));
-
-	}
-
-	/* register port with the serial core */
-
-	if ((ret = ioc3_serial_core_attach(is, idd)))
-		goto out4;
-
-	Num_of_ioc3_cards++;
-
-	return ret;
-
-	/* error exits that give back resources */
-out4:
-	for (cnt = 0; cnt < phys_port; cnt++)
-		kfree(ports[cnt]);
-
-	kfree(card_ptr);
-	return ret;
-}
-
-static struct ioc3_submodule ioc3uart_ops = {
-	.name = "IOC3uart",
-	.probe = ioc3uart_probe,
-	.remove = ioc3uart_remove,
-	/* call .intr for both ports initially */
-	.irq_mask = SIO_IR_SA | SIO_IR_SB,
-	.intr = ioc3uart_intr,
-	.owner = THIS_MODULE,
-};
-
-/**
- * ioc3_detect - module init called,
- */
-static int __init ioc3uart_init(void)
-{
-	int ret;
-
-	/* register with serial core */
-	if ((ret = uart_register_driver(&ioc3_uart)) < 0) {
-		printk(KERN_WARNING
-		       "%s: Couldn't register IOC3 uart serial driver\n",
-		       __func__);
-		return ret;
-	}
-	ret = ioc3_register_submodule(&ioc3uart_ops);
-	if (ret)
-		uart_unregister_driver(&ioc3_uart);
-	return ret;
-}
-
-static void __exit ioc3uart_exit(void)
-{
-	ioc3_unregister_submodule(&ioc3uart_ops);
-	uart_unregister_driver(&ioc3_uart);
-}
-
-module_init(ioc3uart_init);
-module_exit(ioc3uart_exit);
-
-MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
-MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC3 card");
-MODULE_LICENSE("GPL");