summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-01-10 17:06:08 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2011-01-10 17:06:08 -0800
commit0be8c8bd1de21d75ef14eb6af35b664f70a35746 (patch)
treefac1d514dcdb4146d4504f965a7f394c998c6b82 /drivers/serial
parente54be894eae10eca9892e965cc9532f5d5a11767 (diff)
parenta780c6e86851c6479851186c5d5b9fb2b201bec7 (diff)
downloadlinux-0be8c8bd1de21d75ef14eb6af35b664f70a35746.tar.gz
linux-0be8c8bd1de21d75ef14eb6af35b664f70a35746.tar.bz2
linux-0be8c8bd1de21d75ef14eb6af35b664f70a35746.zip
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (52 commits) Blackfin: encode cpu-rev into uImage name Blackfin: bf54x: don't ack GPIO ints when unmasking them Blackfin: sram_free_with_lsl: do not ignore return value of sram_free Blackfin: boards: add missing "static" to peripheral lists Blackfin: DNP5370: new board port Blackfin: bf518f-ezbrd: fix dsa resources Blackfin: move "-m elf32bfin" to general LDFLAGS Blackfin: kgdb_test: make sure to initialize num2 Blackfin: kgdb: disable preempt schedule when running single step in kgdb Blackfin: kgdb: disable interrupt when single stepping in ADEOS Blackfin: SMP: kgdb: apply anomaly 257 work around Blackfin: fix building IPIPE code when XIP is enabled Blackfin: SMP: kgdb: flush core internal write buffer before flushinv Blackfin: sport_uart resources: remove unused secondary RX/TX pins Blackfin: tll6527m: fix spelling in unused code (struct name) Blackfin: bf527-ezkit: add adau1373 chip address Blackfin: no-mpu: fix masking of small uncached dma region Blackfin: pm: drop irq save/restore in standby and suspend to mem callback MAINTAINERS: update Analog Devices support info Blackfin: dpmc.h: pull in new pll.h ...
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig70
-rw-r--r--drivers/serial/bfin_5xx.c638
2 files changed, 388 insertions, 320 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 188aff6d263f..c1df7676a73d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -776,24 +776,7 @@ config BFIN_UART0_CTSRTS
bool "Enable UART0 hardware flow control"
depends on SERIAL_BFIN_UART0
help
- Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
- signal.
-
-config UART0_CTS_PIN
- int "UART0 CTS pin"
- depends on BFIN_UART0_CTSRTS && !BF548
- default 23
- help
- The default pin is GPIO_GP7.
- Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
-
-config UART0_RTS_PIN
- int "UART0 RTS pin"
- depends on BFIN_UART0_CTSRTS && !BF548
- default 22
- help
- The default pin is GPIO_GP6.
- Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
+ Enable hardware flow control in the driver.
config SERIAL_BFIN_UART1
bool "Enable UART1"
@@ -805,22 +788,7 @@ config BFIN_UART1_CTSRTS
bool "Enable UART1 hardware flow control"
depends on SERIAL_BFIN_UART1
help
- Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
- signal.
-
-config UART1_CTS_PIN
- int "UART1 CTS pin"
- depends on BFIN_UART1_CTSRTS && !BF548
- default -1
- help
- Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
-
-config UART1_RTS_PIN
- int "UART1 RTS pin"
- depends on BFIN_UART1_CTSRTS && !BF548
- default -1
- help
- Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
+ Enable hardware flow control in the driver.
config SERIAL_BFIN_UART2
bool "Enable UART2"
@@ -832,22 +800,7 @@ config BFIN_UART2_CTSRTS
bool "Enable UART2 hardware flow control"
depends on SERIAL_BFIN_UART2
help
- Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
- signal.
-
-config UART2_CTS_PIN
- int "UART2 CTS pin"
- depends on BFIN_UART2_CTSRTS && !BF548
- default -1
- help
- Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
-
-config UART2_RTS_PIN
- int "UART2 RTS pin"
- depends on BFIN_UART2_CTSRTS && !BF548
- default -1
- help
- Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
+ Enable hardware flow control in the driver.
config SERIAL_BFIN_UART3
bool "Enable UART3"
@@ -859,22 +812,7 @@ config BFIN_UART3_CTSRTS
bool "Enable UART3 hardware flow control"
depends on SERIAL_BFIN_UART3
help
- Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
- signal.
-
-config UART3_CTS_PIN
- int "UART3 CTS pin"
- depends on BFIN_UART3_CTSRTS && !BF548
- default -1
- help
- Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
-
-config UART3_RTS_PIN
- int "UART3 RTS pin"
- depends on BFIN_UART3_CTSRTS && !BF548
- default -1
- help
- Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
+ Enable hardware flow control in the driver.
config SERIAL_IMX
bool "IMX serial port support"
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 19cac9f610fd..e381b895b04d 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1,7 +1,7 @@
/*
* Blackfin On-Chip Serial Driver
*
- * Copyright 2006-2008 Analog Devices Inc.
+ * Copyright 2006-2010 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
@@ -12,6 +12,9 @@
#define SUPPORT_SYSRQ
#endif
+#define DRIVER_NAME "bfin-uart"
+#define pr_fmt(fmt) DRIVER_NAME ": " fmt
+
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/gfp.h>
@@ -23,21 +26,20 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
-#include <linux/dma-mapping.h>
-
-#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
- defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+#include <linux/gpio.h>
+#include <linux/irq.h>
#include <linux/kgdb.h>
-#include <asm/irq_regs.h>
-#endif
-
-#include <asm/gpio.h>
-#include <mach/bfin_serial_5xx.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <asm/portmux.h>
#include <asm/cacheflush.h>
+#include <asm/dma.h>
+
+#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase)
+#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr)
+#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v))
+#include <asm/bfin_serial.h>
#ifdef CONFIG_SERIAL_BFIN_MODULE
# undef CONFIG_EARLY_PRINTK
@@ -48,12 +50,11 @@
#endif
/* UART name and device definitions */
-#define BFIN_SERIAL_NAME "ttyBF"
+#define BFIN_SERIAL_DEV_NAME "ttyBF"
#define BFIN_SERIAL_MAJOR 204
#define BFIN_SERIAL_MINOR 64
-static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
-static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource);
+static struct bfin_serial_port *bfin_serial_ports[BFIN_UART_NR_PORTS];
#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
@@ -743,14 +744,14 @@ static int bfin_serial_startup(struct uart_port *port)
}
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_output(uart->rts_pin, 0);
}
#endif
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (request_irq(uart->status_irq,
+ if (uart->cts_pin >= 0 && request_irq(uart->status_irq,
bfin_serial_mctrl_cts_int,
IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
+ uart->cts_pin = -1;
pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
}
@@ -796,11 +797,9 @@ static void bfin_serial_shutdown(struct uart_port *port)
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0)
free_irq(gpio_to_irq(uart->cts_pin), uart);
- if (uart->rts_pin >= 0)
- gpio_free(uart->rts_pin);
#endif
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (UART_GET_IER(uart) & EDSSI)
+ if (uart->cts_pin >= 0)
free_irq(uart->status_irq, uart);
#endif
}
@@ -962,33 +961,33 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
*/
static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
{
- int line = port->line;
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
unsigned short val;
switch (ld) {
case N_IRDA:
- val = UART_GET_GCTL(&bfin_serial_ports[line]);
+ val = UART_GET_GCTL(uart);
val |= (IREN | RPOLC);
- UART_PUT_GCTL(&bfin_serial_ports[line], val);
+ UART_PUT_GCTL(uart, val);
break;
default:
- val = UART_GET_GCTL(&bfin_serial_ports[line]);
+ val = UART_GET_GCTL(uart);
val &= ~(IREN | RPOLC);
- UART_PUT_GCTL(&bfin_serial_ports[line], val);
+ UART_PUT_GCTL(uart, val);
}
}
static void bfin_serial_reset_irda(struct uart_port *port)
{
- int line = port->line;
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
unsigned short val;
- val = UART_GET_GCTL(&bfin_serial_ports[line]);
+ val = UART_GET_GCTL(uart);
val &= ~(IREN | RPOLC);
- UART_PUT_GCTL(&bfin_serial_ports[line], val);
+ UART_PUT_GCTL(uart, val);
SSYNC();
val |= (IREN | RPOLC);
- UART_PUT_GCTL(&bfin_serial_ports[line], val);
+ UART_PUT_GCTL(uart, val);
SSYNC();
}
@@ -1070,85 +1069,6 @@ static struct uart_ops bfin_serial_pops = {
#endif
};
-static void __init bfin_serial_hw_init(void)
-{
-#ifdef CONFIG_SERIAL_BFIN_UART0
- peripheral_request(P_UART0_TX, DRIVER_NAME);
- peripheral_request(P_UART0_RX, DRIVER_NAME);
-#endif
-
-#ifdef CONFIG_SERIAL_BFIN_UART1
- peripheral_request(P_UART1_TX, DRIVER_NAME);
- peripheral_request(P_UART1_RX, DRIVER_NAME);
-
-# if defined(CONFIG_BFIN_UART1_CTSRTS) && defined(CONFIG_BF54x)
- peripheral_request(P_UART1_RTS, DRIVER_NAME);
- peripheral_request(P_UART1_CTS, DRIVER_NAME);
-# endif
-#endif
-
-#ifdef CONFIG_SERIAL_BFIN_UART2
- peripheral_request(P_UART2_TX, DRIVER_NAME);
- peripheral_request(P_UART2_RX, DRIVER_NAME);
-#endif
-
-#ifdef CONFIG_SERIAL_BFIN_UART3
- peripheral_request(P_UART3_TX, DRIVER_NAME);
- peripheral_request(P_UART3_RX, DRIVER_NAME);
-
-# if defined(CONFIG_BFIN_UART3_CTSRTS) && defined(CONFIG_BF54x)
- peripheral_request(P_UART3_RTS, DRIVER_NAME);
- peripheral_request(P_UART3_CTS, DRIVER_NAME);
-# endif
-#endif
-}
-
-static void __init bfin_serial_init_ports(void)
-{
- static int first = 1;
- int i;
-
- if (!first)
- return;
- first = 0;
-
- bfin_serial_hw_init();
-
- for (i = 0; i < nr_active_ports; i++) {
- spin_lock_init(&bfin_serial_ports[i].port.lock);
- bfin_serial_ports[i].port.uartclk = get_sclk();
- bfin_serial_ports[i].port.fifosize = BFIN_UART_TX_FIFO_SIZE;
- bfin_serial_ports[i].port.ops = &bfin_serial_pops;
- bfin_serial_ports[i].port.line = i;
- bfin_serial_ports[i].port.iotype = UPIO_MEM;
- bfin_serial_ports[i].port.membase =
- (void __iomem *)bfin_serial_resource[i].uart_base_addr;
- bfin_serial_ports[i].port.mapbase =
- bfin_serial_resource[i].uart_base_addr;
- bfin_serial_ports[i].port.irq =
- bfin_serial_resource[i].uart_irq;
- bfin_serial_ports[i].status_irq =
- bfin_serial_resource[i].uart_status_irq;
- bfin_serial_ports[i].port.flags = UPF_BOOT_AUTOCONF;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- bfin_serial_ports[i].tx_done = 1;
- bfin_serial_ports[i].tx_count = 0;
- bfin_serial_ports[i].tx_dma_channel =
- bfin_serial_resource[i].uart_tx_dma_channel;
- bfin_serial_ports[i].rx_dma_channel =
- bfin_serial_resource[i].uart_rx_dma_channel;
- init_timer(&(bfin_serial_ports[i].rx_dma_timer));
-#endif
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
- defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
- bfin_serial_ports[i].cts_pin =
- bfin_serial_resource[i].uart_cts_pin;
- bfin_serial_ports[i].rts_pin =
- bfin_serial_resource[i].uart_rts_pin;
-#endif
- }
-}
-
#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
/*
* If the port was already initialised (eg, by a boot loader),
@@ -1196,6 +1116,34 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
static struct uart_driver bfin_serial_reg;
+static void bfin_serial_console_putchar(struct uart_port *port, int ch)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ while (!(UART_GET_LSR(uart) & THRE))
+ barrier();
+ UART_PUT_CHAR(uart, ch);
+}
+
+#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) ||
+ defined (CONFIG_EARLY_PRINTK) */
+
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+#define CLASS_BFIN_CONSOLE "bfin-console"
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct bfin_serial_port *uart = bfin_serial_ports[co->index];
+ unsigned long flags;
+
+ spin_lock_irqsave(&uart->port.lock, flags);
+ uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+
+}
+
static int __init
bfin_serial_console_setup(struct console *co, char *options)
{
@@ -1215,9 +1163,12 @@ bfin_serial_console_setup(struct console *co, char *options)
* if so, search for the first available port that does have
* console support.
*/
- if (co->index == -1 || co->index >= nr_active_ports)
- co->index = 0;
- uart = &bfin_serial_ports[co->index];
+ if (co->index < 0 || co->index >= BFIN_UART_NR_PORTS)
+ return -ENODEV;
+
+ uart = bfin_serial_ports[co->index];
+ if (!uart)
+ return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1226,36 +1177,9 @@ bfin_serial_console_setup(struct console *co, char *options)
return uart_set_options(&uart->port, co, baud, parity, bits, flow);
}
-#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) ||
- defined (CONFIG_EARLY_PRINTK) */
-
-#ifdef CONFIG_SERIAL_BFIN_CONSOLE
-static void bfin_serial_console_putchar(struct uart_port *port, int ch)
-{
- struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- while (!(UART_GET_LSR(uart) & THRE))
- barrier();
- UART_PUT_CHAR(uart, ch);
- SSYNC();
-}
-
-/*
- * Interrupts are disabled on entering
- */
-static void
-bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
-{
- struct bfin_serial_port *uart = &bfin_serial_ports[co->index];
- unsigned long flags;
-
- spin_lock_irqsave(&uart->port.lock, flags);
- uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
- spin_unlock_irqrestore(&uart->port.lock, flags);
-
-}
static struct console bfin_serial_console = {
- .name = BFIN_SERIAL_NAME,
+ .name = BFIN_SERIAL_DEV_NAME,
.write = bfin_serial_console_write,
.device = uart_console_device,
.setup = bfin_serial_console_setup,
@@ -1263,44 +1187,30 @@ static struct console bfin_serial_console = {
.index = -1,
.data = &bfin_serial_reg,
};
-
-static int __init bfin_serial_rs_console_init(void)
-{
- bfin_serial_init_ports();
- register_console(&bfin_serial_console);
-
- return 0;
-}
-console_initcall(bfin_serial_rs_console_init);
-
#define BFIN_SERIAL_CONSOLE &bfin_serial_console
#else
#define BFIN_SERIAL_CONSOLE NULL
#endif /* CONFIG_SERIAL_BFIN_CONSOLE */
+#ifdef CONFIG_EARLY_PRINTK
+static struct bfin_serial_port bfin_earlyprintk_port;
+#define CLASS_BFIN_EARLYPRINTK "bfin-earlyprintk"
-#ifdef CONFIG_EARLY_PRINTK
-static __init void early_serial_putc(struct uart_port *port, int ch)
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int count)
{
- unsigned timeout = 0xffff;
- struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-
- while ((!(UART_GET_LSR(uart) & THRE)) && --timeout)
- cpu_relax();
- UART_PUT_CHAR(uart, ch);
-}
+ unsigned long flags;
-static __init void early_serial_write(struct console *con, const char *s,
- unsigned int n)
-{
- struct bfin_serial_port *uart = &bfin_serial_ports[con->index];
- unsigned int i;
+ if (bfin_earlyprintk_port.port.line != co->index)
+ return;
- for (i = 0; i < n; i++, s++) {
- if (*s == '\n')
- early_serial_putc(&uart->port, '\r');
- early_serial_putc(&uart->port, *s);
- }
+ spin_lock_irqsave(&bfin_earlyprintk_port.port.lock, flags);
+ uart_console_write(&bfin_earlyprintk_port.port, s, count,
+ bfin_serial_console_putchar);
+ spin_unlock_irqrestore(&bfin_earlyprintk_port.port.lock, flags);
}
/*
@@ -1311,113 +1221,204 @@ static __init void early_serial_write(struct console *con, const char *s,
*/
static struct __initdata console bfin_early_serial_console = {
.name = "early_BFuart",
- .write = early_serial_write,
+ .write = bfin_earlyprintk_console_write,
.device = uart_console_device,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &bfin_serial_reg,
};
-
-struct console __init *bfin_earlyserial_init(unsigned int port,
- unsigned int cflag)
-{
- struct bfin_serial_port *uart;
- struct ktermios t;
-
-#ifdef CONFIG_SERIAL_BFIN_CONSOLE
- /*
- * If we are using early serial, don't let the normal console rewind
- * log buffer, since that causes things to be printed multiple times
- */
- bfin_serial_console.flags &= ~CON_PRINTBUFFER;
#endif
- if (port == -1 || port >= nr_active_ports)
- port = 0;
- bfin_serial_init_ports();
- bfin_early_serial_console.index = port;
- uart = &bfin_serial_ports[port];
- t.c_cflag = cflag;
- t.c_iflag = 0;
- t.c_oflag = 0;
- t.c_lflag = ICANON;
- t.c_line = port;
- bfin_serial_set_termios(&uart->port, &t, &t);
- return &bfin_early_serial_console;
-}
-
-#endif /* CONFIG_EARLY_PRINTK */
-
static struct uart_driver bfin_serial_reg = {
.owner = THIS_MODULE,
- .driver_name = "bfin-uart",
- .dev_name = BFIN_SERIAL_NAME,
+ .driver_name = DRIVER_NAME,
+ .dev_name = BFIN_SERIAL_DEV_NAME,
.major = BFIN_SERIAL_MAJOR,
.minor = BFIN_SERIAL_MINOR,
.nr = BFIN_UART_NR_PORTS,
.cons = BFIN_SERIAL_CONSOLE,
};
-static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
+static int bfin_serial_suspend(struct platform_device *pdev, pm_message_t state)
{
- int i;
+ struct bfin_serial_port *uart = platform_get_drvdata(pdev);
- for (i = 0; i < nr_active_ports; i++) {
- if (bfin_serial_ports[i].port.dev != &dev->dev)
- continue;
- uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
- }
+ return uart_suspend_port(&bfin_serial_reg, &uart->port);
+}
- return 0;
+static int bfin_serial_resume(struct platform_device *pdev)
+{
+ struct bfin_serial_port *uart = platform_get_drvdata(pdev);
+
+ return uart_resume_port(&bfin_serial_reg, &uart->port);
}
-static int bfin_serial_resume(struct platform_device *dev)
+static int bfin_serial_probe(struct platform_device *pdev)
{
- int i;
+ struct resource *res;
+ struct bfin_serial_port *uart = NULL;
+ int ret = 0;
- for (i = 0; i < nr_active_ports; i++) {
- if (bfin_serial_ports[i].port.dev != &dev->dev)
- continue;
- uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) {
+ dev_err(&pdev->dev, "Wrong bfin uart platform device id.\n");
+ return -ENOENT;
}
- return 0;
-}
+ if (bfin_serial_ports[pdev->id] == NULL) {
-static int bfin_serial_probe(struct platform_device *dev)
-{
- struct resource *res = dev->resource;
- int i;
+ uart = kzalloc(sizeof(*uart), GFP_KERNEL);
+ if (!uart) {
+ dev_err(&pdev->dev,
+ "fail to malloc bfin_serial_port\n");
+ return -ENOMEM;
+ }
+ bfin_serial_ports[pdev->id] = uart;
- for (i = 0; i < dev->num_resources; i++, res++)
- if (res->flags & IORESOURCE_MEM)
- break;
+#ifdef CONFIG_EARLY_PRINTK
+ if (!(bfin_earlyprintk_port.port.membase
+ && bfin_earlyprintk_port.port.line == pdev->id)) {
+ /*
+ * If the peripheral PINs of current port is allocated
+ * in earlyprintk probe stage, don't do it again.
+ */
+#endif
+ ret = peripheral_request_list(
+ (unsigned short *)pdev->dev.platform_data, DRIVER_NAME);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "fail to request bfin serial peripherals\n");
+ goto out_error_free_mem;
+ }
+#ifdef CONFIG_EARLY_PRINTK
+ }
+#endif
+
+ spin_lock_init(&uart->port.lock);
+ uart->port.uartclk = get_sclk();
+ uart->port.fifosize = BFIN_UART_TX_FIFO_SIZE;
+ uart->port.ops = &bfin_serial_pops;
+ uart->port.line = pdev->id;
+ uart->port.iotype = UPIO_MEM;
+ uart->port.flags = UPF_BOOT_AUTOCONF;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
+ ret = -ENOENT;
+ goto out_error_free_peripherals;
+ }
+
+ uart->port.membase = ioremap(res->start,
+ res->end - res->start);
+ if (!uart->port.membase) {
+ dev_err(&pdev->dev, "Cannot map uart IO\n");
+ ret = -ENXIO;
+ goto out_error_free_peripherals;
+ }
+ uart->port.mapbase = res->start;
- if (i < dev->num_resources) {
- for (i = 0; i < nr_active_ports; i++, res++) {
- if (bfin_serial_ports[i].port.mapbase != res->start)
- continue;
- bfin_serial_ports[i].port.dev = &dev->dev;
- uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ uart->port.irq = platform_get_irq(pdev, 0);
+ if (uart->port.irq < 0) {
+ dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n");
+ ret = -ENOENT;
+ goto out_error_unmap;
}
+
+ uart->status_irq = platform_get_irq(pdev, 1);
+ if (uart->status_irq < 0) {
+ dev_err(&pdev->dev, "No uart status IRQ specified\n");
+ ret = -ENOENT;
+ goto out_error_unmap;
+ }
+
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ uart->tx_done = 1;
+ uart->tx_count = 0;
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No uart TX DMA channel specified\n");
+ ret = -ENOENT;
+ goto out_error_unmap;
+ }
+ uart->tx_dma_channel = res->start;
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No uart RX DMA channel specified\n");
+ ret = -ENOENT;
+ goto out_error_unmap;
+ }
+ uart->rx_dma_channel = res->start;
+
+ init_timer(&(uart->rx_dma_timer));
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
+ defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL)
+ uart->cts_pin = -1;
+ else
+ uart->cts_pin = res->start;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 1);
+ if (res == NULL)
+ uart->rts_pin = -1;
+ else
+ uart->rts_pin = res->start;
+# if defined(CONFIG_SERIAL_BFIN_CTSRTS)
+ if (uart->rts_pin >= 0)
+ gpio_request(uart->rts_pin, DRIVER_NAME);
+# endif
+#endif
}
- return 0;
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+ if (!is_early_platform_device(pdev)) {
+#endif
+ uart = bfin_serial_ports[pdev->id];
+ uart->port.dev = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, uart);
+ ret = uart_add_one_port(&bfin_serial_reg, &uart->port);
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+ }
+#endif
+
+ if (!ret)
+ return 0;
+
+ if (uart) {
+out_error_unmap:
+ iounmap(uart->port.membase);
+out_error_free_peripherals:
+ peripheral_free_list(
+ (unsigned short *)pdev->dev.platform_data);
+out_error_free_mem:
+ kfree(uart);
+ bfin_serial_ports[pdev->id] = NULL;
+ }
+
+ return ret;
}
-static int bfin_serial_remove(struct platform_device *dev)
+static int __devexit bfin_serial_remove(struct platform_device *pdev)
{
- int i;
-
- for (i = 0; i < nr_active_ports; i++) {
- if (bfin_serial_ports[i].port.dev != &dev->dev)
- continue;
- uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
- bfin_serial_ports[i].port.dev = NULL;
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS)
- gpio_free(bfin_serial_ports[i].cts_pin);
- gpio_free(bfin_serial_ports[i].rts_pin);
+ struct bfin_serial_port *uart = platform_get_drvdata(pdev);
+
+ dev_set_drvdata(&pdev->dev, NULL);
+
+ if (uart) {
+ uart_remove_one_port(&bfin_serial_reg, &uart->port);
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ if (uart->rts_pin >= 0)
+ gpio_free(uart->rts_pin);
#endif
+ iounmap(uart->port.membase);
+ peripheral_free_list(
+ (unsigned short *)pdev->dev.platform_data);
+ kfree(uart);
+ bfin_serial_ports[pdev->id] = NULL;
}
return 0;
@@ -1425,31 +1426,160 @@ static int bfin_serial_remove(struct platform_device *dev)
static struct platform_driver bfin_serial_driver = {
.probe = bfin_serial_probe,
- .remove = bfin_serial_remove,
+ .remove = __devexit_p(bfin_serial_remove),
.suspend = bfin_serial_suspend,
.resume = bfin_serial_resume,
.driver = {
- .name = "bfin-uart",
+ .name = DRIVER_NAME,
.owner = THIS_MODULE,
},
};
-static int __init bfin_serial_init(void)
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE)
+static __initdata struct early_platform_driver early_bfin_serial_driver = {
+ .class_str = CLASS_BFIN_CONSOLE,
+ .pdrv = &bfin_serial_driver,
+ .requested_id = EARLY_PLATFORM_ID_UNSET,
+};
+
+static int __init bfin_serial_rs_console_init(void)
+{
+ early_platform_driver_register(&early_bfin_serial_driver, DRIVER_NAME);
+
+ early_platform_driver_probe(CLASS_BFIN_CONSOLE, BFIN_UART_NR_PORTS, 0);
+
+ register_console(&bfin_serial_console);
+
+ return 0;
+}
+console_initcall(bfin_serial_rs_console_init);
+#endif
+
+#ifdef CONFIG_EARLY_PRINTK
+/*
+ * Memory can't be allocated dynamically during earlyprink init stage.
+ * So, do individual probe for earlyprink with a static uart port variable.
+ */
+static int bfin_earlyprintk_probe(struct platform_device *pdev)
{
+ struct resource *res;
int ret;
- pr_info("Serial: Blackfin serial driver\n");
+ if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) {
+ dev_err(&pdev->dev, "Wrong earlyprintk platform device id.\n");
+ return -ENOENT;
+ }
+
+ ret = peripheral_request_list(
+ (unsigned short *)pdev->dev.platform_data, DRIVER_NAME);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "fail to request bfin serial peripherals\n");
+ return ret;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
+ ret = -ENOENT;
+ goto out_error_free_peripherals;
+ }
+
+ bfin_earlyprintk_port.port.membase = ioremap(res->start,
+ res->end - res->start);
+ if (!bfin_earlyprintk_port.port.membase) {
+ dev_err(&pdev->dev, "Cannot map uart IO\n");
+ ret = -ENXIO;
+ goto out_error_free_peripherals;
+ }
+ bfin_earlyprintk_port.port.mapbase = res->start;
+ bfin_earlyprintk_port.port.line = pdev->id;
+ bfin_earlyprintk_port.port.uartclk = get_sclk();
+ bfin_earlyprintk_port.port.fifosize = BFIN_UART_TX_FIFO_SIZE;
+ spin_lock_init(&bfin_earlyprintk_port.port.lock);
+
+ return 0;
+
+out_error_free_peripherals:
+ peripheral_free_list(
+ (unsigned short *)pdev->dev.platform_data);
+
+ return ret;
+}
+
+static struct platform_driver bfin_earlyprintk_driver = {
+ .probe = bfin_earlyprintk_probe,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static __initdata struct early_platform_driver early_bfin_earlyprintk_driver = {
+ .class_str = CLASS_BFIN_EARLYPRINTK,
+ .pdrv = &bfin_earlyprintk_driver,
+ .requested_id = EARLY_PLATFORM_ID_UNSET,
+};
+
+struct console __init *bfin_earlyserial_init(unsigned int port,
+ unsigned int cflag)
+{
+ struct ktermios t;
+ char port_name[20];
- bfin_serial_init_ports();
+ if (port < 0 || port >= BFIN_UART_NR_PORTS)
+ return NULL;
+
+ /*
+ * Only probe resource of the given port in earlyprintk boot arg.
+ * The expected port id should be indicated in port name string.
+ */
+ snprintf(port_name, 20, DRIVER_NAME ".%d", port);
+ early_platform_driver_register(&early_bfin_earlyprintk_driver,
+ port_name);
+ early_platform_driver_probe(CLASS_BFIN_EARLYPRINTK, 1, 0);
+
+ if (!bfin_earlyprintk_port.port.membase)
+ return NULL;
+
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+ /*
+ * If we are using early serial, don't let the normal console rewind
+ * log buffer, since that causes things to be printed multiple times
+ */
+ bfin_serial_console.flags &= ~CON_PRINTBUFFER;
+#endif
+
+ bfin_early_serial_console.index = port;
+ t.c_cflag = cflag;
+ t.c_iflag = 0;
+ t.c_oflag = 0;
+ t.c_lflag = ICANON;
+ t.c_line = port;
+ bfin_serial_set_termios(&bfin_earlyprintk_port.port, &t, &t);
+
+ return &bfin_early_serial_console;
+}
+#endif /* CONFIG_EARLY_PRINTK */
+
+static int __init bfin_serial_init(void)
+{
+ int ret;
+
+ pr_info("Blackfin serial driver\n");
ret = uart_register_driver(&bfin_serial_reg);
- if (ret == 0) {
- ret = platform_driver_register(&bfin_serial_driver);
- if (ret) {
- pr_debug("uart register failed\n");
- uart_unregister_driver(&bfin_serial_reg);
- }
+ if (ret) {
+ pr_err("failed to register %s:%d\n",
+ bfin_serial_reg.driver_name, ret);
+ }
+
+ ret = platform_driver_register(&bfin_serial_driver);
+ if (ret) {
+ pr_err("fail to register bfin uart\n");
+ uart_unregister_driver(&bfin_serial_reg);
}
+
return ret;
}
@@ -1463,7 +1593,7 @@ static void __exit bfin_serial_exit(void)
module_init(bfin_serial_init);
module_exit(bfin_serial_exit);
-MODULE_AUTHOR("Aubrey.Li <aubrey.li@analog.com>");
+MODULE_AUTHOR("Sonic Zhang, Aubrey Li");
MODULE_DESCRIPTION("Blackfin generic serial port driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR);