Merge branch 'master' into upstream

Conflicts:
	drivers/hid/hid-ids.h

17 files changed, 323 insertions, 211 deletions

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 1e3d19397a59..8681f1345056 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -58,7 +58,7 @@ static const char serial21285_name[] = "Footbridge UART";
 static void serial21285_stop_tx(struct uart_port *port)
 {
 	if (tx_enabled(port)) {
-		disable_irq(IRQ_CONTX);
+		disable_irq_nosync(IRQ_CONTX);
 		tx_enabled(port) = 0;
 	}
 }
@@ -74,7 +74,7 @@ static void serial21285_start_tx(struct uart_port *port)
 static void serial21285_stop_rx(struct uart_port *port)
 {
 	if (rx_enabled(port)) {
-		disable_irq(IRQ_CONRX);
+		disable_irq_nosync(IRQ_CONRX);
 		rx_enabled(port) = 0;
 	}
 }
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 737b4c960971..c3e37c8e7e26 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1339,14 +1339,12 @@ static void serial8250_start_tx(struct uart_port *port)
 		serial_out(up, UART_IER, up->ier);
 
 		if (up->bugs & UART_BUG_TXEN) {
-			unsigned char lsr, iir;
+			unsigned char lsr;
 			lsr = serial_in(up, UART_LSR);
 			up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
-			iir = serial_in(up, UART_IIR) & 0x0f;
 			if ((up->port.type == PORT_RM9000) ?
-				(lsr & UART_LSR_THRE &&
-				(iir == UART_IIR_NO_INT || iir == UART_IIR_THRI)) :
-				(lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT))
+				(lsr & UART_LSR_THRE) :
+				(lsr & UART_LSR_TEMT))
 				transmit_chars(up);
 		}
 	}
@@ -2646,7 +2644,7 @@ static void __init serial8250_isa_init_ports(void)
 {
 	struct uart_8250_port *up;
 	static int first = 1;
-	int i;
+	int i, irqflag = 0;
 
 	if (!first)
 		return;
@@ -2670,6 +2668,9 @@ static void __init serial8250_isa_init_ports(void)
 		up->port.ops = &serial8250_pops;
 	}
 
+	if (share_irqs)
+		irqflag = IRQF_SHARED;
+
 	for (i = 0, up = serial8250_ports;
 	     i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
 	     i++, up++) {
@@ -2683,8 +2684,7 @@ static void __init serial8250_isa_init_ports(void)
 		up->port.iotype   = old_serial_port[i].io_type;
 		up->port.regshift = old_serial_port[i].iomem_reg_shift;
 		set_io_from_upio(&up->port);
-		if (share_irqs)
-			up->port.irqflags |= IRQF_SHARED;
+		up->port.irqflags |= irqflag;
 	}
 }
 
@@ -2940,10 +2940,13 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 {
 	struct plat_serial8250_port *p = dev->dev.platform_data;
 	struct uart_port port;
-	int ret, i;
+	int ret, i, irqflag = 0;
 
 	memset(&port, 0, sizeof(struct uart_port));
 
+	if (share_irqs)
+		irqflag = IRQF_SHARED;
+
 	for (i = 0; p && p->flags != 0; p++, i++) {
 		port.iobase		= p->iobase;
 		port.membase		= p->membase;
@@ -2960,8 +2963,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 		port.serial_in		= p->serial_in;
 		port.serial_out		= p->serial_out;
 		port.dev		= &dev->dev;
-		if (share_irqs)
-			port.irqflags |= IRQF_SHARED;
+		port.irqflags		|= irqflag;
 		ret = serial8250_register_port(&port);
 		if (ret < 0) {
 			dev_err(&dev->dev, "unable to register port at index %d "
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 36ede02ceacf..24485cc62ff8 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -328,15 +328,7 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	/* U.S. Robotics 56K Voice INT PnP*/
 	{	"USR9190",		0	},
 	/* Wacom tablets */
-	{	"WACF004",		0	},
-	{	"WACF005",		0	},
-	{       "WACF006",              0       },
-	{       "WACF007",              0       },
-	{       "WACF008",              0       },
-	{       "WACF009",              0       },
-	{       "WACF00A",              0       },
-	{       "WACF00B",              0       },
-	{       "WACF00C",              0       },
+	{	"WACFXXX",		0	},
 	/* Compaq touchscreen */
 	{       "FPI2002",              0 },
 	/* Fujitsu Stylistic touchscreens */
@@ -354,6 +346,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"FUJ02E5",		0	},
 	/* Fujitsu P-series tablet PC device */
 	{	"FUJ02E6",		0	},
+	/* Fujitsu Wacom 2FGT Tablet PC device */
+	{	"FUJ02E7",		0	},
 	/*
 	 * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
 	 * disguise)
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 18130f11238e..60d665a17a88 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1088,7 +1088,7 @@ imx_console_get_options(struct imx_port *sport, int *baud,
 			   int *parity, int *bits)
 {
 
-	if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) {
+	if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
 		/* ok, the port was enabled */
 		unsigned int ucr2, ubir,ubmr, uartclk;
 		unsigned int baud_raw;
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index d8983dd5c4b2..85dc0410ac1a 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -2162,7 +2162,7 @@ static struct ioc3_submodule ioc3uart_ops = {
 /**
  * ioc3_detect - module init called,
  */
-static int __devinit ioc3uart_init(void)
+static int __init ioc3uart_init(void)
 {
 	int ret;
 
@@ -2179,7 +2179,7 @@ static int __devinit ioc3uart_init(void)
 	return ret;
 }
 
-static void __devexit ioc3uart_exit(void)
+static void __exit ioc3uart_exit(void)
 {
 	ioc3_unregister_submodule(&ioc3uart_ops);
 	uart_unregister_driver(&ioc3_uart);
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 2e02c3026d24..836d9ab4f729 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -2904,7 +2904,7 @@ static struct ioc4_submodule ioc4_serial_submodule = {
 /**
  * ioc4_serial_init - module init
  */
-int ioc4_serial_init(void)
+static int __init ioc4_serial_init(void)
 {
 	int ret;
 
@@ -2913,20 +2913,30 @@ int ioc4_serial_init(void)
 		printk(KERN_WARNING
 			"%s: Couldn't register rs232 IOC4 serial driver\n",
 			__func__);
-		return ret;
+		goto out;
 	}
 	if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) {
 		printk(KERN_WARNING
 			"%s: Couldn't register rs422 IOC4 serial driver\n",
 			__func__);
-		return ret;
+		goto out_uart_rs232;
 	}
 
 	/* register with IOC4 main module */
-	return ioc4_register_submodule(&ioc4_serial_submodule);
+	ret = ioc4_register_submodule(&ioc4_serial_submodule);
+	if (ret)
+		goto out_uart_rs422;
+	return 0;
+
+out_uart_rs422:
+	uart_unregister_driver(&ioc4_uart_rs422);
+out_uart_rs232:
+	uart_unregister_driver(&ioc4_uart_rs232);
+out:
+	return ret;
 }
 
-static void __devexit ioc4_serial_exit(void)
+static void __exit ioc4_serial_exit(void)
 {
 	ioc4_unregister_submodule(&ioc4_serial_submodule);
 	uart_unregister_driver(&ioc4_uart_rs232);
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 4e5f3bde0461..38a509c684cd 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -138,7 +138,6 @@ struct jsm_board
 	u32		nasync;		/* Number of ports on card */
 
 	u32		irq;		/* Interrupt request number */
-	u64		intr_count;	/* Count of interrupts */
 
 	u64		membase;	/* Start of base memory of the card */
 	u64		membase_end;	/* End of base memory of the card */
@@ -206,8 +205,6 @@ struct jsm_channel {
 
 	u64		ch_close_delay;	/* How long we should drop RTS/DTR for */
 
-	u64		ch_cpstime;	/* Time for CPS calculations	*/
-
 	tcflag_t	ch_c_iflag;	/* channel iflags		*/
 	tcflag_t	ch_c_cflag;	/* channel cflags		*/
 	tcflag_t	ch_c_oflag;	/* channel oflags		*/
@@ -215,11 +212,6 @@ struct jsm_channel {
 	u8		ch_stopc;	/* Stop character		*/
 	u8		ch_startc;	/* Start character		*/
 
-	u32		ch_old_baud;	/* Cache of the current baud */
-	u32		ch_custom_speed;/* Custom baud, if set */
-
-	u32		ch_wopen;	/* Waiting for open process cnt */
-
 	u8		ch_mostat;	/* FEP output modem status	*/
 	u8		ch_mistat;	/* FEP input modem status	*/
 
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index b3604aa322a4..108c3e0471fd 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -48,6 +48,17 @@ struct uart_driver jsm_uart_driver = {
 	.nr		= NR_PORTS,
 };
 
+static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev,
+                                       pci_channel_state_t state);
+static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev);
+static void jsm_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers jsm_err_handler = {
+	.error_detected = jsm_io_error_detected,
+	.slot_reset = jsm_io_slot_reset,
+	.resume = jsm_io_resume,
+};
+
 int jsm_debug;
 module_param(jsm_debug, int, 0);
 MODULE_PARM_DESC(jsm_debug, "Driver debugging level");
@@ -123,7 +134,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
 	}
 
 	rc = request_irq(brd->irq, brd->bd_ops->intr,
-			IRQF_DISABLED|IRQF_SHARED, "JSM", brd);
+			IRQF_SHARED, "JSM", brd);
 	if (rc) {
 		printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq);
 		goto out_iounmap;
@@ -164,6 +175,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
 	}
 
 	pci_set_drvdata(pdev, brd);
+	pci_save_state(pdev);
 
 	return 0;
  out_free_irq:
@@ -222,8 +234,42 @@ static struct pci_driver jsm_driver = {
 	.id_table	= jsm_pci_tbl,
 	.probe		= jsm_probe_one,
 	.remove		= __devexit_p(jsm_remove_one),
+	.err_handler    = &jsm_err_handler,
 };
 
+static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev,
+					pci_channel_state_t state)
+{
+	struct jsm_board *brd = pci_get_drvdata(pdev);
+
+	jsm_remove_uart_port(brd);
+
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev)
+{
+	int rc;
+
+	rc = pci_enable_device(pdev);
+
+	if (rc)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	pci_set_master(pdev);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void jsm_io_resume(struct pci_dev *pdev)
+{
+	struct jsm_board *brd = pci_get_drvdata(pdev);
+
+	pci_restore_state(pdev);
+
+	jsm_uart_port_init(brd);
+}
+
 static int __init jsm_init_module(void)
 {
 	int rc;
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index b4b124e4828f..7960d9633c15 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -954,13 +954,8 @@ static void neo_param(struct jsm_channel *ch)
 		ch->ch_flags |= (CH_BAUD0);
 		ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR);
 		neo_assert_modem_signals(ch);
-		ch->ch_old_baud = 0;
 		return;
 
-	} else if (ch->ch_custom_speed) {
-			baud = ch->ch_custom_speed;
-			if (ch->ch_flags & CH_BAUD0)
-				ch->ch_flags &= ~(CH_BAUD0);
 	} else {
 		int i;
 		unsigned int cflag;
@@ -1045,7 +1040,6 @@ static void neo_param(struct jsm_channel *ch)
 	quot = ch->ch_bd->bd_dividend / baud;
 
 	if (quot != 0) {
-		ch->ch_old_baud = baud;
 		writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr);
 		writeb((quot & 0xff), &ch->ch_neo_uart->txrx);
 		writeb((quot >> 8), &ch->ch_neo_uart->ier);
@@ -1123,8 +1117,6 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 	unsigned long lock_flags2;
 	int outofloop_count = 0;
 
-	brd->intr_count++;
-
 	/* Lock out the slow poller from running on this board. */
 	spin_lock_irqsave(&brd->bd_intr_lock, lock_flags);
 
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 7439c0373620..cd95e215550d 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -296,8 +296,6 @@ static void jsm_tty_close(struct uart_port *port)
 		bd->bd_ops->assert_modem_signals(channel);
 	}
 
-	channel->ch_old_baud = 0;
-
 	/* Turn off UART interrupts for this port */
 	channel->ch_bd->bd_ops->uart_off(channel);
 
@@ -432,7 +430,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 	return 0;
 }
 
-int __devinit jsm_uart_port_init(struct jsm_board *brd)
+int jsm_uart_port_init(struct jsm_board *brd)
 {
 	int i;
 	unsigned int line;
@@ -472,7 +470,7 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd)
 		if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
 			printk(KERN_INFO "jsm: add device failed\n");
 		else
-			printk(KERN_INFO "Added device \n");
+			printk(KERN_INFO "jsm: Port %d added\n", i);
 	}
 
 	jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 0700cd10b97c..683e66f18e8c 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -411,6 +411,17 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
 		goto ack_tx_int;
 	}
 
+	/* Under some circumstances, we see interrupts reported for
+	 * a closed channel. The interrupt mask in R1 is clear, but
+	 * R3 still signals the interrupts and we see them when taking
+	 * an interrupt for the other channel (this could be a qemu
+	 * bug but since the ESCC doc doesn't specify precsiely whether
+	 * R3 interrup status bits are masked by R1 interrupt enable
+	 * bits, better safe than sorry). --BenH.
+	 */
+	if (!ZS_IS_OPEN(uap))
+		goto ack_tx_int;
+
 	if (uap->port.x_char) {
 		uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
 		write_zsdata(uap, uap->port.x_char);
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index b8629d74f6a2..56ee082157aa 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -438,6 +438,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned char cval, fcr = 0;
 	unsigned long flags;
 	unsigned int baud, quot;
+	unsigned int dll;
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
@@ -534,10 +535,18 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
 	else
 		up->mcr &= ~UART_MCR_AFE;
 
-	serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+	serial_out(up, UART_LCR, cval | UART_LCR_DLAB);	/* set DLAB */
 	serial_out(up, UART_DLL, quot & 0xff);		/* LS of divisor */
+
+	/*
+	 * work around Errata #75 according to Intel(R) PXA27x Processor Family
+	 * Specification Update (Nov 2005)
+	 */
+	dll = serial_in(up, UART_DLL);
+	WARN_ON(dll != (quot & 0xff));
+
 	serial_out(up, UART_DLM, quot >> 8);		/* MS of divisor */
-	serial_out(up, UART_LCR, cval);		/* reset DLAB */
+	serial_out(up, UART_LCR, cval);			/* reset DLAB */
 	up->lcr = cval;					/* Save LCR */
 	serial_pxa_set_mctrl(&up->port, up->port.mctrl);
 	serial_out(up, UART_FCR, fcr);
@@ -747,7 +756,7 @@ static int serial_pxa_resume(struct device *dev)
         return 0;
 }
 
-static struct dev_pm_ops serial_pxa_pm_ops = {
+static const struct dev_pm_ops serial_pxa_pm_ops = {
 	.suspend	= serial_pxa_suspend,
 	.resume		= serial_pxa_resume,
 };
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index dcc72444e8e7..7f2830709512 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -342,11 +342,11 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
 
 	if (flags == UPF_SPD_HI)
 		altbaud = 57600;
-	if (flags == UPF_SPD_VHI)
+	else if (flags == UPF_SPD_VHI)
 		altbaud = 115200;
-	if (flags == UPF_SPD_SHI)
+	else if (flags == UPF_SPD_SHI)
 		altbaud = 230400;
-	if (flags == UPF_SPD_WARP)
+	else if (flags == UPF_SPD_WARP)
 		altbaud = 460800;
 
 	for (try = 0; try < 2; try++) {
@@ -385,13 +385,20 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
 		}
 
 		/*
-		 * As a last resort, if the quotient is zero,
-		 * default to 9600 bps
+		 * As a last resort, if the range cannot be met then clip to
+		 * the nearest chip supported rate.
 		 */
-		if (!hung_up)
-			tty_termios_encode_baud_rate(termios, 9600, 9600);
+		if (!hung_up) {
+			if (baud <= min)
+				tty_termios_encode_baud_rate(termios,
+							min + 1, min + 1);
+			else
+				tty_termios_encode_baud_rate(termios,
+							max - 1, max - 1);
+		}
 	}
-
+	/* Should never happen */
+	WARN_ON(1);
 	return 0;
 }
 
@@ -1217,9 +1224,8 @@ static void uart_set_termios(struct tty_struct *tty,
 	/* Handle transition to B0 status */
 	if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
 		uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR);
-
 	/* Handle transition away from B0 status */
-	if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
+	else if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
 		unsigned int mask = TIOCM_DTR;
 		if (!(cflag & CRTSCTS) ||
 		    !test_bit(TTY_THROTTLED, &tty->flags))
@@ -1234,9 +1240,8 @@ static void uart_set_termios(struct tty_struct *tty,
 		__uart_start(tty);
 		spin_unlock_irqrestore(&state->uart_port->lock, flags);
 	}
-
 	/* Handle turning on CRTSCTS */
-	if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
+	else if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
 		spin_lock_irqsave(&state->uart_port->lock, flags);
 		if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) {
 			tty->hw_stopped = 1;
@@ -2008,12 +2013,6 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 
 	mutex_lock(&port->mutex);
 
-	if (!console_suspend_enabled && uart_console(uport)) {
-		/* we're going to avoid suspending serial console */
-		mutex_unlock(&port->mutex);
-		return 0;
-	}
-
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (device_may_wakeup(tty_dev)) {
 		enable_irq_wake(uport->irq);
@@ -2021,20 +2020,23 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 		mutex_unlock(&port->mutex);
 		return 0;
 	}
-	uport->suspended = 1;
+	if (console_suspend_enabled || !uart_console(uport))
+		uport->suspended = 1;
 
 	if (port->flags & ASYNC_INITIALIZED) {
 		const struct uart_ops *ops = uport->ops;
 		int tries;
 
-		set_bit(ASYNCB_SUSPENDED, &port->flags);
-		clear_bit(ASYNCB_INITIALIZED, &port->flags);
+		if (console_suspend_enabled || !uart_console(uport)) {
+			set_bit(ASYNCB_SUSPENDED, &port->flags);
+			clear_bit(ASYNCB_INITIALIZED, &port->flags);
 
-		spin_lock_irq(&uport->lock);
-		ops->stop_tx(uport);
-		ops->set_mctrl(uport, 0);
-		ops->stop_rx(uport);
-		spin_unlock_irq(&uport->lock);
+			spin_lock_irq(&uport->lock);
+			ops->stop_tx(uport);
+			ops->set_mctrl(uport, 0);
+			ops->stop_rx(uport);
+			spin_unlock_irq(&uport->lock);
+		}
 
 		/*
 		 * Wait for the transmitter to empty.
@@ -2049,16 +2051,18 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 			       drv->dev_name,
 			       drv->tty_driver->name_base + uport->line);
 
-		ops->shutdown(uport);
+		if (console_suspend_enabled || !uart_console(uport))
+			ops->shutdown(uport);
 	}
 
 	/*
 	 * Disable the console device before suspending.
 	 */
-	if (uart_console(uport))
+	if (console_suspend_enabled && uart_console(uport))
 		console_stop(uport->cons);
 
-	uart_change_pm(state, 3);
+	if (console_suspend_enabled || !uart_console(uport))
+		uart_change_pm(state, 3);
 
 	mutex_unlock(&port->mutex);
 
@@ -2075,29 +2079,6 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 
 	mutex_lock(&port->mutex);
 
-	if (!console_suspend_enabled && uart_console(uport)) {
-		/* no need to resume serial console, it wasn't suspended */
-		/*
-		 * First try to use the console cflag setting.
-		 */
-		memset(&termios, 0, sizeof(struct ktermios));
-		termios.c_cflag = uport->cons->cflag;
-		/*
-		 * If that's unset, use the tty termios setting.
-		 */
-		if (termios.c_cflag == 0)
-			termios = *state->port.tty->termios;
-		else {
-			termios.c_ispeed = termios.c_ospeed =
-				tty_termios_input_baud_rate(&termios);
-			termios.c_ispeed = termios.c_ospeed =
-				tty_termios_baud_rate(&termios);
-		}
-		uport->ops->set_termios(uport, &termios, NULL);
-		mutex_unlock(&port->mutex);
-		return 0;
-	}
-
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (!uport->suspended && device_may_wakeup(tty_dev)) {
 		disable_irq_wake(uport->irq);
@@ -2123,21 +2104,23 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 		spin_lock_irq(&uport->lock);
 		ops->set_mctrl(uport, 0);
 		spin_unlock_irq(&uport->lock);
-		ret = ops->startup(uport);
-		if (ret == 0) {
-			uart_change_speed(state, NULL);
-			spin_lock_irq(&uport->lock);
-			ops->set_mctrl(uport, uport->mctrl);
-			ops->start_tx(uport);
-			spin_unlock_irq(&uport->lock);
-			set_bit(ASYNCB_INITIALIZED, &port->flags);
-		} else {
-			/*
-			 * Failed to resume - maybe hardware went away?
-			 * Clear the "initialized" flag so we won't try
-			 * to call the low level drivers shutdown method.
-			 */
-			uart_shutdown(state);
+		if (console_suspend_enabled || !uart_console(uport)) {
+			ret = ops->startup(uport);
+			if (ret == 0) {
+				uart_change_speed(state, NULL);
+				spin_lock_irq(&uport->lock);
+				ops->set_mctrl(uport, uport->mctrl);
+				ops->start_tx(uport);
+				spin_unlock_irq(&uport->lock);
+				set_bit(ASYNCB_INITIALIZED, &port->flags);
+			} else {
+				/*
+				 * Failed to resume - maybe hardware went away?
+				 * Clear the "initialized" flag so we won't try
+				 * to call the low level drivers shutdown method.
+				 */
+				uart_shutdown(state);
+			}
 		}
 
 		clear_bit(ASYNCB_SUSPENDED, &port->flags);
@@ -2344,7 +2327,7 @@ static const struct tty_operations uart_ops = {
  */
 int uart_register_driver(struct uart_driver *drv)
 {
-	struct tty_driver *normal = NULL;
+	struct tty_driver *normal;
 	int i, retval;
 
 	BUG_ON(drv->state);
@@ -2354,13 +2337,12 @@ int uart_register_driver(struct uart_driver *drv)
 	 * we have a large number of ports to handle.
 	 */
 	drv->state = kzalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL);
-	retval = -ENOMEM;
 	if (!drv->state)
 		goto out;
 
-	normal  = alloc_tty_driver(drv->nr);
+	normal = alloc_tty_driver(drv->nr);
 	if (!normal)
-		goto out;
+		goto out_kfree;
 
 	drv->tty_driver = normal;
 
@@ -2393,12 +2375,14 @@ int uart_register_driver(struct uart_driver *drv)
 	}
 
 	retval = tty_register_driver(normal);
- out:
-	if (retval < 0) {
-		put_tty_driver(normal);
-		kfree(drv->state);
-	}
-	return retval;
+	if (retval >= 0)
+		return retval;
+
+	put_tty_driver(normal);
+out_kfree:
+	kfree(drv->state);
+out:
+	return -ENOMEM;
 }
 
 /**
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index fc413f0f8dd2..95421fa3b304 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -146,7 +146,8 @@ static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
 {
 	struct serial_info *info = link->priv;
 
-	outb(12, info->c950ctrl + 1);
+	if (info->c950ctrl)
+		outb(12, info->c950ctrl + 1);
 }
 
 /* request_region? oxsemi branch does no request_region too... */
@@ -757,6 +758,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
 	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
@@ -819,6 +821,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
+	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
 	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"),  /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
@@ -827,7 +830,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
-	PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"),
+	PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
 	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100  1.00.",0x19ca78af,0xf964f42b),
 	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
 	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232  1.00.",0x19ca78af,0x69fb7490),
@@ -861,6 +864,18 @@ static struct pcmcia_device_id serial_ids[] = {
 };
 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
 
+MODULE_FIRMWARE("cis/PCMLM28.cis");
+MODULE_FIRMWARE("cis/DP83903.cis");
+MODULE_FIRMWARE("cis/3CCFEM556.cis");
+MODULE_FIRMWARE("cis/3CXEM556.cis");
+MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
+MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
+MODULE_FIRMWARE("cis/SW_555_SER.cis");
+MODULE_FIRMWARE("cis/MT5634ZLX.cis");
+MODULE_FIRMWARE("cis/COMpad2.cis");
+MODULE_FIRMWARE("cis/COMpad4.cis");
+MODULE_FIRMWARE("cis/RS-COM-2P.cis");
+
 static struct pcmcia_driver serial_cs_driver = {
 	.owner		= THIS_MODULE,
 	.drv		= {
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index ff38dbdb5c6e..42f3333c4ad0 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -222,9 +222,9 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 		   Set SCP6MD1,0 = {01} (output)  */
 		__raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
 
-		data = ctrl_inb(SCPDR);
+		data = __raw_readb(SCPDR);
 		/* Set /RTS2 (bit6) = 0 */
-		ctrl_outb(data & 0xbf, SCPDR);
+		__raw_writeb(data & 0xbf, SCPDR);
 	}
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
@@ -897,11 +897,21 @@ static void sci_shutdown(struct uart_port *port)
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
-	unsigned int status, baud, smr_val;
+	unsigned int status, baud, smr_val, max_baud;
 	int t = -1;
 
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-	if (likely(baud))
+	/*
+	 * earlyprintk comes here early on with port->uartclk set to zero.
+	 * the clock framework is not up and running at this point so here
+	 * we assume that 115200 is the maximum baud rate. please note that
+	 * the baud rate is not programmed during earlyprintk - it is assumed
+	 * that the previous boot loader has enabled required clocks and
+	 * setup the baud rate generator hardware for us already.
+	 */
+	max_baud = port->uartclk ? port->uartclk / 16 : 115200;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
+	if (likely(baud && port->uartclk))
 		t = SCBRR_VALUE(baud, port->uartclk);
 
 	do {
@@ -1042,11 +1052,26 @@ static void __devinit sci_init_single(struct platform_device *dev,
 	sci_port->port.ops	= &sci_uart_ops;
 	sci_port->port.iotype	= UPIO_MEM;
 	sci_port->port.line	= index;
-	sci_port->port.fifosize	= 1;
-	sci_port->iclk		= p->clk ? clk_get(&dev->dev, p->clk) : NULL;
-	sci_port->dclk		= clk_get(&dev->dev, "peripheral_clk");
-	sci_port->enable	= sci_clk_enable;
-	sci_port->disable	= sci_clk_disable;
+
+	switch (p->type) {
+	case PORT_SCIFA:
+		sci_port->port.fifosize = 64;
+		break;
+	case PORT_SCIF:
+		sci_port->port.fifosize = 16;
+		break;
+	default:
+		sci_port->port.fifosize = 1;
+		break;
+	}
+
+	if (dev) {
+		sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
+		sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
+		sci_port->enable = sci_clk_enable;
+		sci_port->disable = sci_clk_disable;
+		sci_port->port.dev = &dev->dev;
+	}
 
 	sci_port->break_timer.data = (unsigned long)sci_port;
 	sci_port->break_timer.function = sci_break_timer;
@@ -1057,7 +1082,6 @@ static void __devinit sci_init_single(struct platform_device *dev,
 
 	sci_port->port.irq	= p->irqs[SCIx_TXI_IRQ];
 	sci_port->port.flags	= p->flags;
-	sci_port->port.dev	= &dev->dev;
 	sci_port->type		= sci_port->port.type = p->type;
 
 	memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
@@ -1101,7 +1125,7 @@ static void serial_console_write(struct console *co, const char *s,
 		sci_port->disable(port);
 }
 
-static int __init serial_console_setup(struct console *co, char *options)
+static int __devinit serial_console_setup(struct console *co, char *options)
 {
 	struct sci_port *sci_port;
 	struct uart_port *port;
@@ -1119,9 +1143,14 @@ static int __init serial_console_setup(struct console *co, char *options)
 	if (co->index >= SCI_NPORTS)
 		co->index = 0;
 
-	sci_port = &sci_ports[co->index];
-	port = &sci_port->port;
-	co->data = port;
+	if (co->data) {
+		port = co->data;
+		sci_port = to_sci_port(port);
+	} else {
+		sci_port = &sci_ports[co->index];
+		port = &sci_port->port;
+		co->data = port;
+	}
 
 	/*
 	 * Also need to check port->type, we don't actually have any
@@ -1165,6 +1194,15 @@ static int __init sci_console_init(void)
 	return 0;
 }
 console_initcall(sci_console_init);
+
+static struct sci_port early_serial_port;
+static struct console early_serial_console = {
+	.name           = "early_ttySC",
+	.write          = serial_console_write,
+	.flags          = CON_PRINTBUFFER,
+};
+static char early_serial_buf[32];
+
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
 #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
@@ -1250,6 +1288,21 @@ static int __devinit sci_probe(struct platform_device *dev)
 	struct sh_sci_priv *priv;
 	int i, ret = -EINVAL;
 
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+	if (is_early_platform_device(dev)) {
+		if (dev->id == -1)
+			return -ENOTSUPP;
+		early_serial_console.index = dev->id;
+		early_serial_console.data = &early_serial_port.port;
+		sci_init_single(NULL, &early_serial_port, dev->id, p);
+		serial_console_setup(&early_serial_console, early_serial_buf);
+		if (!strstr(early_serial_buf, "keep"))
+			early_serial_console.flags |= CON_BOOT;
+		register_console(&early_serial_console);
+		return 0;
+	}
+#endif
+
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -1312,7 +1365,7 @@ static int sci_resume(struct device *dev)
 	return 0;
 }
 
-static struct dev_pm_ops sci_dev_pm_ops = {
+static const struct dev_pm_ops sci_dev_pm_ops = {
 	.suspend	= sci_suspend,
 	.resume		= sci_resume,
 };
@@ -1349,6 +1402,10 @@ static void __exit sci_exit(void)
 	uart_unregister_driver(&sci_uart_driver);
 }
 
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+early_platform_init_buffer("earlyprintk", &sci_driver,
+			   early_serial_buf, ARRAY_SIZE(early_serial_buf));
+#endif
 module_init(sci_init);
 module_exit(sci_exit);
 
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index a32094eeb42b..0efcded59ae6 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -517,20 +517,20 @@ static const struct __attribute__((packed)) {
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xfffffe80)
-		return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */
+		return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */
 	if (port->mapbase == 0xa4000150)
-		return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
+		return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xa4000140)
-		return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
+		return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == SCIF0)
-		return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
+		return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
 	if (port->mapbase == SCIF2)
-		return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
+		return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
@@ -557,68 +557,68 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
+		return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
 	if (port->mapbase == 0xffe80000)
-		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe80000)
-		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7757)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xfe4b0000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0;
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0;
 	if (port->mapbase == 0xfe4c0000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0;
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0;
 	if (port->mapbase == 0xfe4d0000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0;
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xfe600000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfe610000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfe620000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7343)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe10000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe20000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe30000)
-		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7366)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
+		return __raw_readb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */
+		return __raw_readb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */
 	if (port->mapbase == 0xffe10000)
-		return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */
+		return __raw_readb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */
 	if (port->mapbase == 0xffe20000)
-		return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */
+		return __raw_readb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */
 
 	return 1;
 }
@@ -626,17 +626,17 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
         if (port->mapbase == 0xffe00000)
-                return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
+                return __raw_readb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
         if (port->mapbase == 0xffe10000)
-                return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
+                return __raw_readb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
         if (port->mapbase == 0xffe20000)
-                return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
+                return __raw_readb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
         if (port->mapbase == 0xa4e30000)
-                return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
+                return __raw_readb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
         if (port->mapbase == 0xa4e40000)
-                return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
+                return __raw_readb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
         if (port->mapbase == 0xa4e50000)
-                return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
+                return __raw_readb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
         return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7724)
@@ -645,9 +645,9 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->type == PORT_SCIF)
-		return ctrl_inw((port->mapbase + SCFSR))  & SCIF_BRK ? 1 : 0;
+		return __raw_readw((port->mapbase + SCFSR))  & SCIF_BRK ? 1 : 0;
 	if (port->type == PORT_SCIFA)
-		return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
+		return __raw_readw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
@@ -665,11 +665,11 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe08000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe10000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */
 
 	return 1;
 }
@@ -677,20 +677,20 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xff923000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xff924000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xff925000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffe10000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \
@@ -698,17 +698,17 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffea0000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffeb0000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffec0000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffed0000)
-		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffee0000)
-		return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffef0000)
-		return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
@@ -718,22 +718,22 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xfffe8000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffe8800)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffe9000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffe9800)
-		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
 #if defined(CONFIG_CPU_SUBTYPE_SH7201)
 	if (port->mapbase == 0xfffeA000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffeA800)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffeB000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xfffeB800)
-		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
 #endif
 	return 1;
 }
@@ -741,24 +741,24 @@ static inline int sci_rxd_in(struct uart_port *port)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xf8400000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xf8410000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xf8420000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SHX3)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffc30000)
-		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffc40000)
-		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffc50000)
-		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
 	if (port->mapbase == 0xffc60000)
-		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+		return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #endif
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 46de564aaea0..465f2fae1025 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -1179,16 +1179,18 @@ static void uart_firmware_cont(const struct firmware *fw, void *context)
 
 	if (firmware->header.length != fw->size) {
 		dev_err(dev, "invalid firmware\n");
-		return;
+		goto out;
 	}
 
 	ret = qe_upload_firmware(firmware);
 	if (ret) {
 		dev_err(dev, "could not load firmware\n");
-		return;
+		goto out;
 	}
 
 	firmware_loaded = 1;
+ out:
+	release_firmware(fw);
 }
 
 static int ucc_uart_probe(struct of_device *ofdev,
@@ -1247,7 +1249,7 @@ static int ucc_uart_probe(struct of_device *ofdev,
 			 */
 			ret = request_firmware_nowait(THIS_MODULE,
 				FW_ACTION_HOTPLUG, filename, &ofdev->dev,
-				&ofdev->dev, uart_firmware_cont);
+				GFP_KERNEL, &ofdev->dev, uart_firmware_cont);
 			if (ret) {
 				dev_err(&ofdev->dev,
 					"could not load firmware %s\n",