summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-orion.c
diff options
context:
space:
mode:
authorGreg Ungerer <gerg@uclinux.org>2014-09-28 23:24:04 +1000
committerMark Brown <broonie@kernel.org>2014-10-01 19:21:51 +0100
commitdf59fa7f4bca9658b75f0f5fee225b3a057475c5 (patch)
tree6c01e397e59715c8043f0de634299f2273bac18b /drivers/spi/spi-orion.c
parent7d1311b93e58ed55f3a31cc8f94c4b8fe988a2b9 (diff)
downloadlinux-df59fa7f4bca9658b75f0f5fee225b3a057475c5.tar.gz
linux-df59fa7f4bca9658b75f0f5fee225b3a057475c5.tar.bz2
linux-df59fa7f4bca9658b75f0f5fee225b3a057475c5.zip
spi: orion: support armada extended baud rates
The Armada SoC family implementation of this SPI hardware module has extended the configuration register to allow for a wider range of SPI clock rates. Specifically the Serial Baud Rate Pre-selection bits in the SPI Interface Configuration Register now also use bits 6 and 7 as well. Modify the baud rate calculation to handle these differences for the Armada case. Potentially a baud rate can be setup using a number of different pre-scalar and scalar combinations. This code tries all possible pre-scalar divisors (8 in total) to try and find the most accurate set. This change introduces (and documents) a new device tree compatible device name "armada-370-spi" to support this. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi/spi-orion.c')
-rw-r--r--drivers/spi/spi-orion.c116
1 files changed, 94 insertions, 22 deletions
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index c4675fa8b645..acf8e48db16c 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/clk.h>
#include <linux/sizes.h>
#include <asm/unaligned.h>
@@ -40,13 +41,27 @@
#define ORION_SPI_MODE_CPHA (1 << 12)
#define ORION_SPI_IF_8_16_BIT_MODE (1 << 5)
#define ORION_SPI_CLK_PRESCALE_MASK 0x1F
+#define ARMADA_SPI_CLK_PRESCALE_MASK 0xDF
#define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \
ORION_SPI_MODE_CPHA)
+enum orion_spi_type {
+ ORION_SPI,
+ ARMADA_SPI,
+};
+
+struct orion_spi_dev {
+ enum orion_spi_type typ;
+ unsigned int min_divisor;
+ unsigned int max_divisor;
+ u32 prescale_mask;
+};
+
struct orion_spi {
struct spi_master *master;
void __iomem *base;
struct clk *clk;
+ const struct orion_spi_dev *devdata;
};
static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg)
@@ -83,30 +98,66 @@ static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
u32 prescale;
u32 reg;
struct orion_spi *orion_spi;
+ const struct orion_spi_dev *devdata;
orion_spi = spi_master_get_devdata(spi->master);
+ devdata = orion_spi->devdata;
tclk_hz = clk_get_rate(orion_spi->clk);
- /*
- * the supported rates are: 4,6,8...30
- * round up as we look for equal or less speed
- */
- rate = DIV_ROUND_UP(tclk_hz, speed);
- rate = roundup(rate, 2);
+ if (devdata->typ == ARMADA_SPI) {
+ unsigned int clk, spr, sppr, sppr2, err;
+ unsigned int best_spr, best_sppr, best_err;
+
+ best_err = speed;
+ best_spr = 0;
+ best_sppr = 0;
+
+ /* Iterate over the valid range looking for best fit */
+ for (sppr = 0; sppr < 8; sppr++) {
+ sppr2 = 0x1 << sppr;
+
+ spr = tclk_hz / sppr2;
+ spr = DIV_ROUND_UP(spr, speed);
+ if ((spr == 0) || (spr > 15))
+ continue;
- /* check if requested speed is too small */
- if (rate > 30)
- return -EINVAL;
+ clk = tclk_hz / (spr * sppr2);
+ err = speed - clk;
- if (rate < 4)
- rate = 4;
+ if (err < best_err) {
+ best_spr = spr;
+ best_sppr = sppr;
+ best_err = err;
+ }
+ }
+
+ if ((best_sppr == 0) && (best_spr == 0))
+ return -EINVAL;
+
+ prescale = ((best_sppr & 0x6) << 5) |
+ ((best_sppr & 0x1) << 4) | best_spr;
+ } else {
+ /*
+ * the supported rates are: 4,6,8...30
+ * round up as we look for equal or less speed
+ */
+ rate = DIV_ROUND_UP(tclk_hz, speed);
+ rate = roundup(rate, 2);
+
+ /* check if requested speed is too small */
+ if (rate > 30)
+ return -EINVAL;
- /* Convert the rate to SPI clock divisor value. */
- prescale = 0x10 + rate/2;
+ if (rate < 4)
+ rate = 4;
+
+ /* Convert the rate to SPI clock divisor value. */
+ prescale = 0x10 + rate/2;
+ }
reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
- reg = ((reg & ~ORION_SPI_CLK_PRESCALE_MASK) | prescale);
+ reg = ((reg & ~devdata->prescale_mask) | prescale);
writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
return 0;
@@ -342,8 +393,31 @@ static int orion_spi_reset(struct orion_spi *orion_spi)
return 0;
}
+static const struct orion_spi_dev orion_spi_dev_data = {
+ .typ = ORION_SPI,
+ .min_divisor = 4,
+ .max_divisor = 30,
+ .prescale_mask = ORION_SPI_CLK_PRESCALE_MASK,
+};
+
+static const struct orion_spi_dev armada_spi_dev_data = {
+ .typ = ARMADA_SPI,
+ .min_divisor = 1,
+ .max_divisor = 1920,
+ .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
+};
+
+static const struct of_device_id orion_spi_of_match_table[] = {
+ { .compatible = "marvell,orion-spi", .data = &orion_spi_dev_data, },
+ { .compatible = "marvell,armada-370-spi", .data = &armada_spi_dev_data, },
+ {}
+};
+MODULE_DEVICE_TABLE(of, orion_spi_of_match_table);
+
static int orion_spi_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id;
+ const struct orion_spi_dev *devdata;
struct spi_master *master;
struct orion_spi *spi;
struct resource *r;
@@ -378,6 +452,10 @@ static int orion_spi_probe(struct platform_device *pdev)
spi = spi_master_get_devdata(master);
spi->master = master;
+ of_id = of_match_device(orion_spi_of_match_table, &pdev->dev);
+ devdata = of_id->data;
+ spi->devdata = devdata;
+
spi->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(spi->clk)) {
status = PTR_ERR(spi->clk);
@@ -389,8 +467,8 @@ static int orion_spi_probe(struct platform_device *pdev)
goto out;
tclk_hz = clk_get_rate(spi->clk);
- master->max_speed_hz = DIV_ROUND_UP(tclk_hz, 4);
- master->min_speed_hz = DIV_ROUND_UP(tclk_hz, 30);
+ master->max_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->min_divisor);
+ master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
spi->base = devm_ioremap_resource(&pdev->dev, r);
@@ -469,12 +547,6 @@ static const struct dev_pm_ops orion_spi_pm_ops = {
NULL)
};
-static const struct of_device_id orion_spi_of_match_table[] = {
- { .compatible = "marvell,orion-spi", },
- {}
-};
-MODULE_DEVICE_TABLE(of, orion_spi_of_match_table);
-
static struct platform_driver orion_spi_driver = {
.driver = {
.name = DRIVER_NAME,