diff options
| author | Doug Anderson <dianders@chromium.org> | 2014-09-03 13:44:26 -0700 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2014-09-04 23:54:11 +0100 |
| commit | 62946172c81578477fcbb26478aebaa31353488d (patch) | |
| tree | 9e274b45ca36ec40a60921ff1d96641b10ca1241 /drivers/spi/spi-rockchip.c | |
| parent | 64bc0110f1ec905b1676b5ef60c1cc5b1799e1b6 (diff) | |
| download | linux-62946172c81578477fcbb26478aebaa31353488d.tar.gz linux-62946172c81578477fcbb26478aebaa31353488d.tar.bz2 linux-62946172c81578477fcbb26478aebaa31353488d.zip | |
spi/rockchip: Don't warn if SPI is busy but disabled
The reference manual from Rockchip claims this about the BSF (SPI Busy
Flag):
* 0 - SPI is idle or disabled
* 1 - SPI is actively transferring data
The above doesn't quite appear to be true. Specifically I found the
busy bit set when SPI was disabled. Let's change the WARN_ON() so we
only check the busy bit if the controller was enabled.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi/spi-rockchip.c')
| -rw-r--r-- | drivers/spi/spi-rockchip.c | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 2a31bc2d3fd3..514f8e73b8e1 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -529,7 +529,8 @@ static int rockchip_spi_transfer_one( int ret = 0; struct rockchip_spi *rs = spi_master_get_devdata(master); - WARN_ON((readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY)); + WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) && + (readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY)); if (!xfer->tx_buf && !xfer->rx_buf) { dev_err(rs->dev, "No buffer for transfer\n"); |