diff options
author | Mark Brown <broonie@kernel.org> | 2020-03-12 17:38:42 +0000 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2020-03-12 17:38:42 +0000 |
commit | 7315608302f1ff76c873e6acbc4ac1b0ada02fe1 (patch) | |
tree | 0c3abde3715ee050c9a090a334b461714a0668cc /drivers/spi | |
parent | 5b16668e638c61a9cd4dffaa41d8b3b6f53f6b3a (diff) | |
parent | 9ea7db818d9dcbbde581925b82bbe259e1926e20 (diff) | |
download | linux-7315608302f1ff76c873e6acbc4ac1b0ada02fe1.tar.gz linux-7315608302f1ff76c873e6acbc4ac1b0ada02fe1.tar.bz2 linux-7315608302f1ff76c873e6acbc4ac1b0ada02fe1.zip |
Merge series "spi: meson-spicc: add support for AXG and G12A variants" from Neil Armstrong <narmstrong@baylibre.com>:
The SPICC controller in Amlogic AXG & G12A is capable of driving the
CLK/MOSI/SS signal lines through the idle state which avoid the signals
floating in unexpected state, is capable of using linear clock divider
to reach a much fine tuned range of clocks, while the old controller only
uses a power of two clock divider, result at a more coarse clock range and
finally is capable of running at 80M clock.
The SPICC controller in Amlogic G12A takes the source clock from a specific
clock instead of the bus clock and has a different FIFO size and doesn't
handle the RX Half interrupt the same way as GXL & AXG variants. Thus
the burst management is simplified and takes in account a variable FIFO
size.
Now the controller can support frequencies higher than 30MHz, we need
the setup the I/O line delays in regard of the SPI clock frequency.
Neil Armstrong (7):
spi: meson-spicc: remove unused variables
spi: meson-spicc: support max 80MHz clock
spi: meson-spicc: add min sclk for each compatible
spi: meson-spicc: setup IO line delay
spi: meson-spicc: adapt burst handling for G12A support
dt-bindings: spi: amlogic,meson-gx-spicc: add Amlogic G12A compatible
spi: meson-spicc: add support for Amlogic G12A
Sunny Luo (2):
spi: meson-spicc: enhance output enable feature
spi: meson-spicc: add a linear clock divider support
.../bindings/spi/amlogic,meson-gx-spicc.yaml | 22 +
drivers/spi/Kconfig | 1 +
drivers/spi/spi-meson-spicc.c | 496 +++++++++++++-----
3 files changed, 392 insertions(+), 127 deletions(-)
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/Kconfig | 1 | ||||
-rw-r--r-- | drivers/spi/spi-meson-spicc.c | 496 |
2 files changed, 370 insertions, 127 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index c33ca96b44de..efce98e9844e 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -428,6 +428,7 @@ config SPI_FSL_ESPI config SPI_MESON_SPICC tristate "Amlogic Meson SPICC controller" + depends on COMMON_CLK depends on ARCH_MESON || COMPILE_TEST help This enables master mode support for the SPICC (SPI communication diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index 7f5680fe2568..77f7d0e0e46a 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -9,11 +9,13 @@ #include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/device.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/types.h> @@ -33,7 +35,6 @@ * to have a CS go down over the full transfer */ -#define SPICC_MAX_FREQ 30000000 #define SPICC_MAX_BURST 128 /* Register Map */ @@ -105,7 +106,21 @@ #define SPICC_SWAP_RO BIT(14) /* RX FIFO Data Swap Read-Only */ #define SPICC_SWAP_W1 BIT(15) /* RX FIFO Data Swap Write-Only */ #define SPICC_DLYCTL_RO_MASK GENMASK(20, 15) /* Delay Control Read-Only */ -#define SPICC_DLYCTL_W1_MASK GENMASK(21, 16) /* Delay Control Write-Only */ +#define SPICC_MO_DELAY_MASK GENMASK(17, 16) /* Master Output Delay */ +#define SPICC_MO_NO_DELAY 0 +#define SPICC_MO_DELAY_1_CYCLE 1 +#define SPICC_MO_DELAY_2_CYCLE 2 +#define SPICC_MO_DELAY_3_CYCLE 3 +#define SPICC_MI_DELAY_MASK GENMASK(19, 18) /* Master Input Delay */ +#define SPICC_MI_NO_DELAY 0 +#define SPICC_MI_DELAY_1_CYCLE 1 +#define SPICC_MI_DELAY_2_CYCLE 2 +#define SPICC_MI_DELAY_3_CYCLE 3 +#define SPICC_MI_CAP_DELAY_MASK GENMASK(21, 20) /* Master Capture Delay */ +#define SPICC_CAP_AHEAD_2_CYCLE 0 +#define SPICC_CAP_AHEAD_1_CYCLE 1 +#define SPICC_CAP_NO_DELAY 2 +#define SPICC_CAP_DELAY_1_CYCLE 3 #define SPICC_FIFORST_RO_MASK GENMASK(22, 21) /* FIFO Softreset Read-Only */ #define SPICC_FIFORST_W1_MASK GENMASK(23, 22) /* FIFO Softreset Write-Only */ @@ -113,31 +128,59 @@ #define SPICC_DWADDR 0x24 /* Write Address of DMA */ +#define SPICC_ENH_CTL0 0x38 /* Enhanced Feature */ +#define SPICC_ENH_CLK_CS_DELAY_MASK GENMASK(15, 0) +#define SPICC_ENH_DATARATE_MASK GENMASK(23, 16) +#define SPICC_ENH_DATARATE_EN BIT(24) +#define SPICC_ENH_MOSI_OEN BIT(25) +#define SPICC_ENH_CLK_OEN BIT(26) +#define SPICC_ENH_CS_OEN BIT(27) +#define SPICC_ENH_CLK_CS_DELAY_EN BIT(28) +#define SPICC_ENH_MAIN_CLK_AO BIT(29) + #define writel_bits_relaxed(mask, val, addr) \ writel_relaxed((readl_relaxed(addr) & ~(mask)) | (val), addr) -#define SPICC_BURST_MAX 16 -#define SPICC_FIFO_HALF 10 +struct meson_spicc_data { + unsigned int max_speed_hz; + unsigned int min_speed_hz; + unsigned int fifo_size; + bool has_oen; + bool has_enhance_clk_div; + bool has_pclk; +}; struct meson_spicc_device { struct spi_master *master; struct platform_device *pdev; void __iomem *base; struct clk *core; + struct clk *pclk; + struct clk *clk; struct spi_message *message; struct spi_transfer *xfer; + const struct meson_spicc_data *data; u8 *tx_buf; u8 *rx_buf; unsigned int bytes_per_word; unsigned long tx_remain; - unsigned long txb_remain; unsigned long rx_remain; - unsigned long rxb_remain; unsigned long xfer_remain; - bool is_burst_end; - bool is_last_burst; }; +static void meson_spicc_oen_enable(struct meson_spicc_device *spicc) +{ + u32 conf; + + if (!spicc->data->has_oen) + return; + + conf = readl_relaxed(spicc->base + SPICC_ENH_CTL0) | + SPICC_ENH_MOSI_OEN | SPICC_ENH_CLK_OEN | SPICC_ENH_CS_OEN; + + writel_relaxed(conf, spicc->base + SPICC_ENH_CTL0); +} + static inline bool meson_spicc_txfull(struct meson_spicc_device *spicc) { return !!FIELD_GET(SPICC_TF, @@ -146,7 +189,7 @@ static inline bool meson_spicc_txfull(struct meson_spicc_device *spicc) static inline bool meson_spicc_rxready(struct meson_spicc_device *spicc) { - return FIELD_GET(SPICC_RH | SPICC_RR | SPICC_RF_EN, + return FIELD_GET(SPICC_RH | SPICC_RR | SPICC_RF, readl_relaxed(spicc->base + SPICC_STATREG)); } @@ -201,34 +244,22 @@ static inline void meson_spicc_tx(struct meson_spicc_device *spicc) spicc->base + SPICC_TXDATA); } -static inline u32 meson_spicc_setup_rx_irq(struct meson_spicc_device *spicc, - u32 irq_ctrl) +static inline void meson_spicc_setup_burst(struct meson_spicc_device *spicc) { - if (spicc->rx_remain > SPICC_FIFO_HALF) - irq_ctrl |= SPICC_RH_EN; - else - irq_ctrl |= SPICC_RR_EN; - - return irq_ctrl; -} -static inline void meson_spicc_setup_burst(struct meson_spicc_device *spicc, - unsigned int burst_len) -{ + unsigned int burst_len = min_t(unsigned int, + spicc->xfer_remain / + spicc->bytes_per_word, + spicc->data->fifo_size); /* Setup Xfer variables */ spicc->tx_remain = burst_len; spicc->rx_remain = burst_len; spicc->xfer_remain -= burst_len * spicc->bytes_per_word; - spicc->is_burst_end = false; - if (burst_len < SPICC_BURST_MAX || !spicc->xfer_remain) - spicc->is_last_burst = true; - else - spicc->is_last_burst = false; /* Setup burst length */ writel_bits_relaxed(SPICC_BURSTLENGTH_MASK, FIELD_PREP(SPICC_BURSTLENGTH_MASK, - burst_len), + burst_len - 1), spicc->base + SPICC_CONREG); /* Fill TX FIFO */ @@ -238,97 +269,71 @@ static inline void meson_spicc_setup_burst(struct meson_spicc_device *spicc, static irqreturn_t meson_spicc_irq(int irq, void *data) { struct meson_spicc_device *spicc = (void *) data; - u32 ctrl = readl_relaxed(spicc->base + SPICC_INTREG); - u32 stat = readl_relaxed(spicc->base + SPICC_STATREG) & ctrl; - ctrl &= ~(SPICC_RH_EN | SPICC_RR_EN); + writel_bits_relaxed(SPICC_TC, SPICC_TC, spicc->base + SPICC_STATREG); /* Empty RX FIFO */ meson_spicc_rx(spicc); - /* Enable TC interrupt since we transferred everything */ - if (!spicc->tx_remain && !spicc->rx_remain) { - spicc->is_burst_end = true; - - /* Enable TC interrupt */ - ctrl |= SPICC_TC_EN; + if (!spicc->xfer_remain) { + /* Disable all IRQs */ + writel(0, spicc->base + SPICC_INTREG); - /* Reload IRQ status */ - stat = readl_relaxed(spicc->base + SPICC_STATREG) & ctrl; - } - - /* Check transfer complete */ - if ((stat & SPICC_TC) && spicc->is_burst_end) { - unsigned int burst_len; - - /* Clear TC bit */ - writel_relaxed(SPICC_TC, spicc->base + SPICC_STATREG); - - /* Disable TC interrupt */ - ctrl &= ~SPICC_TC_EN; - - if (spicc->is_last_burst) { - /* Disable all IRQs */ - writel(0, spicc->base + SPICC_INTREG); - - spi_finalize_current_transfer(spicc->master); - - return IRQ_HANDLED; - } - - burst_len = min_t(unsigned int, - spicc->xfer_remain / spicc->bytes_per_word, - SPICC_BURST_MAX); + spi_finalize_current_transfer(spicc->master); - /* Setup burst */ - meson_spicc_setup_burst(spicc, burst_len); - - /* Restart burst */ - writel_bits_relaxed(SPICC_XCH, SPICC_XCH, - spicc->base + SPICC_CONREG); + return IRQ_HANDLED; } - /* Setup RX interrupt trigger */ - ctrl = meson_spicc_setup_rx_irq(spicc, ctrl); + /* Setup burst */ + meson_spicc_setup_burst(spicc); - /* Reconfigure interrupts */ - writel(ctrl, spicc->base + SPICC_INTREG); + /* Start burst */ + writel_bits_relaxed(SPICC_XCH, SPICC_XCH, spicc->base + SPICC_CONREG); return IRQ_HANDLED; } -static u32 meson_spicc_setup_speed(struct meson_spicc_device *spicc, u32 conf, - u32 speed) +static void meson_spicc_auto_io_delay(struct meson_spicc_device *spicc) { - unsigned long parent, value; - unsigned int i, div; - - parent = clk_get_rate(spicc->core); - - /* Find closest inferior/equal possible speed */ - for (i = 0 ; i < 7 ; ++i) { - /* 2^(data_rate+2) */ - value = parent >> (i + 2); - - if (value <= speed) - break; + u32 div, hz; + u32 mi_delay, cap_delay; + u32 conf; + + if (spicc->data->has_enhance_clk_div) { + div = FIELD_GET(SPICC_ENH_DATARATE_MASK, + readl_relaxed(spicc->base + SPICC_ENH_CTL0)); + div++; + div <<= 1; + } else { + div = FIELD_GET(SPICC_DATARATE_MASK, + readl_relaxed(spicc->base + SPICC_CONREG)); + div += 2; + div = 1 << div; } - /* If provided speed it lower than max divider, use max divider */ - if (i > 7) { - div = 7; - dev_warn_once(&spicc->pdev->dev, "unable to get close to speed %u\n", - speed); - } else - div = i; - - dev_dbg(&spicc->pdev->dev, "parent %lu, speed %u -> %lu (%u)\n", - parent, speed, value, div); - - conf &= ~SPICC_DATARATE_MASK; - conf |= FIELD_PREP(SPICC_DATARATE_MASK, div); - - return conf; + mi_delay = SPICC_MI_NO_DELAY; + cap_delay = SPICC_CAP_AHEAD_2_CYCLE; + hz = clk_get_rate(spicc->clk); + + if (hz >= 100000000) + cap_delay = SPICC_CAP_DELAY_1_CYCLE; + else if (hz >= 80000000) + cap_delay = SPICC_CAP_NO_DELAY; + else if (hz >= 40000000) + cap_delay = SPICC_CAP_AHEAD_1_CYCLE; + else if (div >= 16) + mi_delay = SPICC_MI_DELAY_3_CYCLE; + else if (div >= 8) + mi_delay = SPICC_MI_DELAY_2_CYCLE; + else if (div >= 6) + mi_delay = SPICC_MI_DELAY_1_CYCLE; + + conf = readl_relaxed(spicc->base + SPICC_TESTREG); + conf &= ~(SPICC_MO_DELAY_MASK | SPICC_MI_DELAY_MASK + | SPICC_MI_CAP_DELAY_MASK); + conf |= FIELD_PREP(SPICC_MI_DELAY_MASK, mi_delay); + conf |= FIELD_PREP(SPICC_MI_CAP_DELAY_MASK, cap_delay); + writel_relaxed(conf, spicc->base + SPICC_TESTREG); } static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc, @@ -339,9 +344,6 @@ static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc, /* Read original configuration */ conf = conf_orig = readl_relaxed(spicc->base + SPICC_CONREG); - /* Select closest divider */ - conf = meson_spicc_setup_speed(spicc, conf, xfer->speed_hz); - /* Setup word width */ conf &= ~SPICC_BITLENGTH_MASK; conf |= FIELD_PREP(SPICC_BITLENGTH_MASK, @@ -350,6 +352,32 @@ static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc, /* Ignore if unchanged */ if (conf != conf_orig) writel_relaxed(conf, spicc->base + SPICC_CONREG); + + clk_set_rate(spicc->clk, xfer->speed_hz); + + meson_spicc_auto_io_delay(spicc); + + writel_relaxed(0, spicc->base + SPICC_DMAREG); +} + +static void meson_spicc_reset_fifo(struct meson_spicc_device *spicc) +{ + u32 data; + + if (spicc->data->has_oen) + writel_bits_relaxed(SPICC_ENH_MAIN_CLK_AO, + SPICC_ENH_MAIN_CLK_AO, + spicc->base + SPICC_ENH_CTL0); + + writel_bits_relaxed(SPICC_FIFORST_W1_MASK, SPICC_FIFORST_W1_MASK, + spicc->base + SPICC_TESTREG); + + while (meson_spicc_rxready(spicc)) + data = readl_relaxed(spicc->base + SPICC_RXDATA); + + if (spicc->data->has_oen) + writel_bits_relaxed(SPICC_ENH_MAIN_CLK_AO, 0, + spicc->base + SPICC_ENH_CTL0); } static int meson_spicc_transfer_one(struct spi_master *master, @@ -357,8 +385,6 @@ static int meson_spicc_transfer_one(struct spi_master *master, struct spi_transfer *xfer) { struct meson_spicc_device *spicc = spi_master_get_devdata(master); - unsigned int burst_len; - u32 irq = 0; /* Store current transfer */ spicc->xfer = xfer; @@ -372,22 +398,22 @@ static int meson_spicc_transfer_one(struct spi_master *master, spicc->bytes_per_word = DIV_ROUND_UP(spicc->xfer->bits_per_word, 8); + if (xfer->len % spicc->bytes_per_word) + return -EINVAL; + /* Setup transfer parameters */ meson_spicc_setup_xfer(spicc, xfer); - burst_len = min_t(unsigned int, - spicc->xfer_remain / spicc->bytes_per_word, - SPICC_BURST_MAX); + meson_spicc_reset_fifo(spicc); - meson_spicc_setup_burst(spicc, burst_len); - - irq = meson_spicc_setup_rx_irq(spicc, irq); + /* Setup burst */ + meson_spicc_setup_burst(spicc); /* Start burst */ writel_bits_relaxed(SPICC_XCH, SPICC_XCH, spicc->base + SPICC_CONREG); /* Enable interrupts */ - writel_relaxed(irq, spicc->base + SPICC_INTREG); + writel_relaxed(SPICC_TC_EN, spicc->base + SPICC_INTREG); return 1; } @@ -444,7 +470,7 @@ static int meson_spicc_prepare_message(struct spi_master *master, /* Setup no wait cycles by default */ writel_relaxed(0, spicc->base + SPICC_PERIODREG); - writel_bits_relaxed(BIT(24), BIT(24), spicc->base + SPICC_TESTREG); + writel_bits_relaxed(SPICC_LBC_W1, 0, spicc->base + SPICC_TESTREG); return 0; } @@ -456,9 +482,6 @@ static int meson_spicc_unprepare_transfer(struct spi_master *master) /* Disable all IRQs */ writel(0, spicc->base + SPICC_INTREG); - /* Disable controller */ - writel_bits_relaxed(SPICC_ENABLE, 0, spicc->base + SPICC_CONREG); - device_reset_optional(&spicc->pdev->dev); return 0; @@ -477,11 +500,167 @@ static void meson_spicc_cleanup(struct spi_device *spi) spi->controller_state = NULL; } +/* + * The Clock Mux + * x-----------------x x------------x x------\ + * |---| pow2 fixed div |---| pow2 div |----| | + * | x-----------------x x------------x | | + * src ---| | mux |-- out + * | x-----------------x x------------x | | + * |---| enh fixed div |---| enh div |0---| | + * x-----------------x x------------x x------/ + * + * Clk path for GX series: + * src -> pow2 fixed div -> pow2 div -> out + * + * Clk path for AXG series: + * src -> pow2 fixed div -> pow2 div -> mux -> out + * src -> enh fixed div -> enh div -> mux -> out + * + * Clk path for G12A series: + * pclk -> pow2 fixed div -> pow2 div -> mux -> out + * pclk -> enh fixed div -> enh div -> mux -> out + */ + +static int meson_spicc_clk_init(struct meson_spicc_device *spicc) +{ + struct device *dev = &spicc->pdev->dev; + struct clk_fixed_factor *pow2_fixed_div, *enh_fixed_div; + struct clk_divider *pow2_div, *enh_div; + struct clk_mux *mux; + struct clk_init_data init; + struct clk *clk; + struct clk_parent_data parent_data[2]; + char name[64]; + + memset(&init, 0, sizeof(init)); + memset(&parent_data, 0, sizeof(parent_data)); + + init.parent_data = parent_data; + + /* algorithm for pow2 div: rate = freq / 4 / (2 ^ N) */ + + pow2_fixed_div = devm_kzalloc(dev, sizeof(*pow2_fixed_div), GFP_KERNEL); + if (!pow2_fixed_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#pow2_fixed_div", dev_name(dev)); + init.name = name; + init.ops = &clk_fixed_factor_ops; + init.flags = 0; + if (spicc->data->has_pclk) + parent_data[0].hw = __clk_get_hw(spicc->pclk); + else + parent_data[0].hw = __clk_get_hw(spicc->core); + init.num_parents = 1; + + pow2_fixed_div->mult = 1, + pow2_fixed_div->div = 4, + pow2_fixed_div->hw.init = &init; + + clk = devm_clk_register(dev, &pow2_fixed_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + pow2_div = devm_kzalloc(dev, sizeof(*pow2_div), GFP_KERNEL); + if (!pow2_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#pow2_div", dev_name(dev)); + init.name = name; + init.ops = &clk_divider_ops; + init.flags = CLK_SET_RATE_PARENT; + parent_data[0].hw = &pow2_fixed_div->hw; + init.num_parents = 1; + + pow2_div->shift = 16, + pow2_div->width = 3, + pow2_div->flags = CLK_DIVIDER_POWER_OF_TWO, + pow2_div->reg = spicc->base + SPICC_CONREG; + pow2_div->hw.init = &init; + + clk = devm_clk_register(dev, &pow2_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + if (!spicc->data->has_enhance_clk_div) { + spicc->clk = clk; + return 0; + } + + /* algorithm for enh div: rate = freq / 2 / (N + 1) */ + + enh_fixed_div = devm_kzalloc(dev, sizeof(*enh_fixed_div), GFP_KERNEL); + if (!enh_fixed_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#enh_fixed_div", dev_name(dev)); + init.name = name; + init.ops = &clk_fixed_factor_ops; + init.flags = 0; + if (spicc->data->has_pclk) + parent_data[0].hw = __clk_get_hw(spicc->pclk); + else + parent_data[0].hw = __clk_get_hw(spicc->core); + init.num_parents = 1; + + enh_fixed_div->mult = 1, + enh_fixed_div->div = 2, + enh_fixed_div->hw.init = &init; + + clk = devm_clk_register(dev, &enh_fixed_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + enh_div = devm_kzalloc(dev, sizeof(*enh_div), GFP_KERNEL); + if (!enh_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#enh_div", dev_name(dev)); + init.name = name; + init.ops = &clk_divider_ops; + init.flags = CLK_SET_RATE_PARENT; + parent_data[0].hw = &enh_fixed_div->hw; + init.num_parents = 1; + + enh_div->shift = 16, + enh_div->width = 8, + enh_div->reg = spicc->base + SPICC_ENH_CTL0; + enh_div->hw.init = &init; + + clk = devm_clk_register(dev, &enh_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#sel", dev_name(dev)); + init.name = name; + init.ops = &clk_mux_ops; + parent_data[0].hw = &pow2_div->hw; + parent_data[1].hw = &enh_div->hw; + init.num_parents = 2; + init.flags = CLK_SET_RATE_PARENT; + + mux->mask = 0x1, + mux->shift = 24, + mux->reg = spicc->base + SPICC_ENH_CTL0; + mux->hw.init = &init; + + spicc->clk = devm_clk_register(dev, &mux->hw); + if (WARN_ON(IS_ERR(spicc->clk))) + return PTR_ERR(spicc->clk); + + return 0; +} + static int meson_spicc_probe(struct platform_device *pdev) { struct spi_master *master; struct meson_spicc_device *spicc; - int ret, irq, rate; + int ret, irq; master = spi_alloc_master(&pdev->dev, sizeof(*spicc)); if (!master) { @@ -491,6 +670,13 @@ static int meson_spicc_probe(struct platform_device *pdev) spicc = spi_master_get_devdata(master); spicc->master = master; + spicc->data = of_device_get_match_data(&pdev->dev); + if (!spicc->data) { + dev_err(&pdev->dev, "failed to get match data\n"); + ret = -EINVAL; + goto out_master; + } + spicc->pdev = pdev; platform_set_drvdata(pdev, spicc); @@ -501,6 +687,10 @@ static int meson_spicc_probe(struct platform_device *pdev) goto out_master; } + /* Set master mode and enable controller */ + writel_relaxed(SPICC_ENABLE | SPICC_MODE_MASTER, + spicc->base + SPICC_CONREG); + /* Disable all IRQs */ writel_relaxed(0, spicc->base + SPICC_INTREG); @@ -519,12 +709,26 @@ static int meson_spicc_probe(struct platform_device *pdev) goto out_master; } + if (spicc->data->has_pclk) { + spicc->pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(spicc->pclk)) { + dev_err(&pdev->dev, "pclk clock request failed\n"); + ret = PTR_ERR(spicc->pclk); + goto out_master; + } + } + ret = clk_prepare_enable(spicc->core); if (ret) { dev_err(&pdev->dev, "core clock enable failed\n"); goto out_master; } - rate = clk_get_rate(spicc->core); + + ret = clk_prepare_enable(spicc->pclk); + if (ret) { + dev_err(&pdev->dev, "pclk clock enable failed\n"); + goto out_master; + } device_reset_optional(&pdev->dev); @@ -536,7 +740,8 @@ static int meson_spicc_probe(struct platform_device *pdev) SPI_BPW_MASK(16) | SPI_BPW_MASK(8); master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX); - master->min_speed_hz = rate >> 9; + master->min_speed_hz = spicc->data->min_speed_hz; + master->max_speed_hz = spicc->data->max_speed_hz; master->setup = meson_spicc_setup; master->cleanup = meson_spicc_cleanup; master->prepare_message = meson_spicc_prepare_message; @@ -544,11 +749,13 @@ static int meson_spicc_probe(struct platform_device *pdev) master->transfer_one = meson_spicc_transfer_one; master->use_gpio_descriptors = true; - /* Setup max rate according to the Meson GX datasheet */ - if ((rate >> 2) > SPICC_MAX_FREQ) - master->max_speed_hz = SPICC_MAX_FREQ; - else - master->max_speed_hz = rate >> 2; + meson_spicc_oen_enable(spicc); + + ret = meson_spicc_clk_init(spicc); + if (ret) { + dev_err(&pdev->dev, "clock registration failed\n"); + goto out_master; + } ret = devm_spi_register_master(&pdev->dev, master); if (ret) { @@ -560,6 +767,7 @@ static int meson_spicc_probe(struct platform_device *pdev) out_clk: clk_disable_unprepare(spicc->core); + clk_disable_unprepare(spicc->pclk); out_master: spi_master_put(master); @@ -575,13 +783,47 @@ static int meson_spicc_remove(struct platform_device *pdev) writel(0, spicc->base + SPICC_CONREG); clk_disable_unprepare(spicc->core); + clk_disable_unprepare(spicc->pclk); return 0; } +static const struct meson_spicc_data meson_spicc_gx_data = { + .max_speed_hz = 30000000, + .min_speed_hz = 325000, + .fifo_size = 16, +}; + +static const struct meson_spicc_data meson_spicc_axg_data = { + .max_speed_hz = 80000000, + .min_speed_hz = 325000, + .fifo_size = 16, + .has_oen = true, + .has_enhance_clk_div = true, +}; + +static const struct meson_spicc_data meson_spicc_g12a_data = { + .max_speed_hz = 166666666, + .min_speed_hz = 50000, + .fifo_size = 15, + .has_oen = true, + .has_enhance_clk_div = true, + .has_pclk = true, +}; + static const struct of_device_id meson_spicc_of_match[] = { - { .compatible = "amlogic,meson-gx-spicc", }, - { .compatible = "amlogic,meson-axg-spicc", }, + { + .compatible = "amlogic,meson-gx-spicc", + .data = &meson_spicc_gx_data, + }, + { + .compatible = "amlogic,meson-axg-spicc", + .data = &meson_spicc_axg_data, + }, + { + .compatible = "amlogic,meson-g12a-spicc", + .data = &meson_spicc_g12a_data, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, meson_spicc_of_match); |