thermal: qcom: add support for adc-tm5 PMIC thermal monitor

Add support for Thermal Monitoring part of PMIC5. This part is closely
coupled with ADC, using it's channels directly. ADC-TM support
generating interrupts on ADC value crossing low or high voltage bounds,
which is used to support thermal trip points.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210205000118.493610-3-dmitry.baryshkov@linaro.org

3 files changed, 635 insertions, 0 deletions

diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index aa9c1d80fae4..8d5ac2df26dc 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -10,6 +10,17 @@ config QCOM_TSENS
 	  Also able to set threshold temperature for both hot and cold and update
 	  when a threshold is reached.
 
+config QCOM_SPMI_ADC_TM5
+	tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5"
+	depends on OF && SPMI && IIO
+	select REGMAP_SPMI
+	select QCOM_VADC_COMMON
+	help
+	  This enables the thermal driver for the ADC thermal monitoring
+	  device. It shows up as a thermal zone with multiple trip points.
+	  Thermal client sets threshold temperature for both warm and cool and
+	  gets updated when a threshold is reached.
+
 config QCOM_SPMI_TEMP_ALARM
 	tristate "Qualcomm SPMI PMIC Temperature Alarm"
 	depends on OF && SPMI && IIO
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index ec86eef7f6a6..252ea7d9da0b 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -3,4 +3,5 @@ obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
 
 qcom_tsens-y			+= tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \
 				   tsens-8960.o
+obj-$(CONFIG_QCOM_SPMI_ADC_TM5)	+= qcom-spmi-adc-tm5.o
 obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
new file mode 100644
index 000000000000..a2014375587d
--- /dev/null
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Linaro Limited
+ *
+ * Based on original driver:
+ * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
+ */
+#include <linux/bitfield.h>
+#include <linux/iio/adc/qcom-vadc-common.h>
+#include <linux/iio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+/*
+ * Thermal monitoring block consists of 8 (ADC_TM5_NUM_CHANNELS) channels. Each
+ * channel is programmed to use one of ADC channels for voltage comparison.
+ * Voltages are programmed using ADC codes, so we have to convert temp to
+ * voltage and then to ADC code value.
+ *
+ * Configuration of TM channels must match configuration of corresponding ADC
+ * channels.
+ */
+
+#define ADC5_MAX_CHANNEL                        0xc0
+#define ADC_TM5_NUM_CHANNELS		8
+
+#define ADC_TM5_STATUS_LOW			0x0a
+
+#define ADC_TM5_STATUS_HIGH			0x0b
+
+#define ADC_TM5_NUM_BTM				0x0f
+
+#define ADC_TM5_ADC_DIG_PARAM			0x42
+
+#define ADC_TM5_FAST_AVG_CTL			(ADC_TM5_ADC_DIG_PARAM + 1)
+#define ADC_TM5_FAST_AVG_EN				BIT(7)
+
+#define ADC_TM5_MEAS_INTERVAL_CTL		(ADC_TM5_ADC_DIG_PARAM + 2)
+#define ADC_TM5_TIMER1					3 /* 3.9ms */
+
+#define ADC_TM5_MEAS_INTERVAL_CTL2		(ADC_TM5_ADC_DIG_PARAM + 3)
+#define ADC_TM5_MEAS_INTERVAL_CTL2_MASK			0xf0
+#define ADC_TM5_TIMER2					10 /* 1 second */
+#define ADC_TM5_MEAS_INTERVAL_CTL3_MASK			0xf
+#define ADC_TM5_TIMER3					4 /* 4 second */
+
+#define ADC_TM_EN_CTL1				0x46
+#define ADC_TM_EN					BIT(7)
+#define ADC_TM_CONV_REQ				0x47
+#define ADC_TM_CONV_REQ_EN				BIT(7)
+
+#define ADC_TM5_M_CHAN_BASE			0x60
+
+#define ADC_TM5_M_ADC_CH_SEL_CTL(n)		(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 0)
+#define ADC_TM5_M_LOW_THR0(n)			(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 1)
+#define ADC_TM5_M_LOW_THR1(n)			(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 2)
+#define ADC_TM5_M_HIGH_THR0(n)			(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 3)
+#define ADC_TM5_M_HIGH_THR1(n)			(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 4)
+#define ADC_TM5_M_MEAS_INTERVAL_CTL(n)		(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 5)
+#define ADC_TM5_M_CTL(n)			(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 6)
+#define ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK		0xf
+#define ADC_TM5_M_CTL_CAL_SEL_MASK			0x30
+#define ADC_TM5_M_CTL_CAL_VAL				0x40
+#define ADC_TM5_M_EN(n)				(ADC_TM5_M_CHAN_BASE + ((n) * 8) + 7)
+#define ADC_TM5_M_MEAS_EN				BIT(7)
+#define ADC_TM5_M_HIGH_THR_INT_EN			BIT(1)
+#define ADC_TM5_M_LOW_THR_INT_EN			BIT(0)
+
+enum adc5_timer_select {
+	ADC5_TIMER_SEL_1 = 0,
+	ADC5_TIMER_SEL_2,
+	ADC5_TIMER_SEL_3,
+	ADC5_TIMER_SEL_NONE,
+};
+
+struct adc_tm5_data {
+	const u32	full_scale_code_volt;
+	unsigned int	*decimation;
+	unsigned int	*hw_settle;
+};
+
+enum adc_tm5_cal_method {
+	ADC_TM5_NO_CAL = 0,
+	ADC_TM5_RATIOMETRIC_CAL,
+	ADC_TM5_ABSOLUTE_CAL
+};
+
+struct adc_tm5_chip;
+
+/**
+ * struct adc_tm5_channel - ADC Thermal Monitoring channel data.
+ * @channel: channel number.
+ * @adc_channel: corresponding ADC channel number.
+ * @cal_method: calibration method.
+ * @prescale: channel scaling performed on the input signal.
+ * @hw_settle_time: the time between AMUX being configured and the
+ *	start of conversion.
+ * @iio: IIO channel instance used by this channel.
+ * @chip: ADC TM chip instance.
+ * @tzd: thermal zone device used by this channel.
+ */
+struct adc_tm5_channel {
+	unsigned int		channel;
+	unsigned int		adc_channel;
+	enum adc_tm5_cal_method	cal_method;
+	unsigned int		prescale;
+	unsigned int		hw_settle_time;
+	struct iio_channel	*iio;
+	struct adc_tm5_chip	*chip;
+	struct thermal_zone_device *tzd;
+};
+
+/**
+ * struct adc_tm5_chip - ADC Thermal Monitoring properties
+ * @regmap: SPMI ADC5 Thermal Monitoring  peripheral register map field.
+ * @dev: SPMI ADC5 device.
+ * @data: software configuration data.
+ * @channels: array of ADC TM channel data.
+ * @nchannels: amount of channels defined/allocated
+ * @decimation: sampling rate supported for the channel.
+ * @avg_samples: ability to provide single result from the ADC
+ *	that is an average of multiple measurements.
+ * @base: base address of TM registers.
+ */
+struct adc_tm5_chip {
+	struct regmap		*regmap;
+	struct device		*dev;
+	const struct adc_tm5_data	*data;
+	struct adc_tm5_channel	*channels;
+	unsigned int		nchannels;
+	unsigned int		decimation;
+	unsigned int		avg_samples;
+	u16			base;
+};
+
+static const struct adc_tm5_data adc_tm5_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.decimation = (unsigned int []) { 250, 420, 840 },
+	.hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700,
+					 1000, 2000, 4000, 8000, 16000, 32000,
+					 64000, 128000 },
+};
+
+static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
+{
+	return regmap_bulk_read(adc_tm->regmap, adc_tm->base + offset, data, len);
+}
+
+static int adc_tm5_write(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
+{
+	return regmap_bulk_write(adc_tm->regmap, adc_tm->base + offset, data, len);
+}
+
+static int adc_tm5_reg_update(struct adc_tm5_chip *adc_tm, u16 offset, u8 mask, u8 val)
+{
+	return regmap_write_bits(adc_tm->regmap, adc_tm->base + offset, mask, val);
+}
+
+static irqreturn_t adc_tm5_isr(int irq, void *data)
+{
+	struct adc_tm5_chip *chip = data;
+	u8 status_low, status_high, ctl;
+	int ret, i;
+
+	ret = adc_tm5_read(chip, ADC_TM5_STATUS_LOW, &status_low, sizeof(status_low));
+	if (unlikely(ret)) {
+		dev_err(chip->dev, "read status low failed: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	ret = adc_tm5_read(chip, ADC_TM5_STATUS_HIGH, &status_high, sizeof(status_high));
+	if (unlikely(ret)) {
+		dev_err(chip->dev, "read status high failed: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	for (i = 0; i < chip->nchannels; i++) {
+		bool upper_set = false, lower_set = false;
+		unsigned int ch = chip->channels[i].channel;
+
+		/* No TZD, we warned at the boot time */
+		if (!chip->channels[i].tzd)
+			continue;
+
+		ret = adc_tm5_read(chip, ADC_TM5_M_EN(ch), &ctl, sizeof(ctl));
+		if (unlikely(ret)) {
+			dev_err(chip->dev, "ctl read failed: %d, channel %d\n", ret, i);
+			continue;
+		}
+
+		if (!(ctl & ADC_TM5_M_MEAS_EN))
+			continue;
+
+		lower_set = (status_low & BIT(ch)) &&
+			(ctl & ADC_TM5_M_LOW_THR_INT_EN);
+
+		upper_set = (status_high & BIT(ch)) &&
+			(ctl & ADC_TM5_M_HIGH_THR_INT_EN);
+
+		if (upper_set || lower_set)
+			thermal_zone_device_update(chip->channels[i].tzd,
+						   THERMAL_EVENT_UNSPECIFIED);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int adc_tm5_get_temp(void *data, int *temp)
+{
+	struct adc_tm5_channel *channel = data;
+	int ret;
+
+	if (!channel || !channel->iio)
+		return -EINVAL;
+
+	ret = iio_read_channel_processed(channel->iio, temp);
+	if (ret < 0)
+		return ret;
+
+	if (ret != IIO_VAL_INT)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int adc_tm5_disable_channel(struct adc_tm5_channel *channel)
+{
+	struct adc_tm5_chip *chip = channel->chip;
+	unsigned int reg = ADC_TM5_M_EN(channel->channel);
+
+	return adc_tm5_reg_update(chip, reg,
+				  ADC_TM5_M_MEAS_EN |
+				  ADC_TM5_M_HIGH_THR_INT_EN |
+				  ADC_TM5_M_LOW_THR_INT_EN,
+				  0);
+}
+
+static int adc_tm5_enable(struct adc_tm5_chip *chip)
+{
+	int ret;
+	u8 data;
+
+	data = ADC_TM_EN;
+	ret = adc_tm5_write(chip, ADC_TM_EN_CTL1, &data, sizeof(data));
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm enable failed\n");
+		return ret;
+	}
+
+	data = ADC_TM_CONV_REQ_EN;
+	ret = adc_tm5_write(chip, ADC_TM_CONV_REQ, &data, sizeof(data));
+	if (ret < 0) {
+		dev_err(chip->dev, "adc-tm request conversion failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int adc_tm5_configure(struct adc_tm5_channel *channel, int low, int high)
+{
+	struct adc_tm5_chip *chip = channel->chip;
+	u8 buf[8];
+	u16 reg = ADC_TM5_M_ADC_CH_SEL_CTL(channel->channel);
+	int ret;
+
+	ret = adc_tm5_read(chip, reg, buf, sizeof(buf));
+	if (ret) {
+		dev_err(chip->dev, "channel %d params read failed: %d\n", channel->channel, ret);
+		return ret;
+	}
+
+	buf[0] = channel->adc_channel;
+
+	/* High temperature corresponds to low voltage threshold */
+	if (high != INT_MAX) {
+		u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale,
+				chip->data->full_scale_code_volt, high);
+
+		buf[1] = adc_code & 0xff;
+		buf[2] = adc_code >> 8;
+		buf[7] |= ADC_TM5_M_LOW_THR_INT_EN;
+	} else {
+		buf[7] &= ~ADC_TM5_M_LOW_THR_INT_EN;
+	}
+
+	/* Low temperature corresponds to high voltage threshold */
+	if (low != -INT_MAX) {
+		u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale,
+				chip->data->full_scale_code_volt, low);
+
+		buf[3] = adc_code & 0xff;
+		buf[4] = adc_code >> 8;
+		buf[7] |= ADC_TM5_M_HIGH_THR_INT_EN;
+	} else {
+		buf[7] &= ~ADC_TM5_M_HIGH_THR_INT_EN;
+	}
+
+	buf[5] = ADC5_TIMER_SEL_2;
+
+	/* Set calibration select, hw_settle delay */
+	buf[6] &= ~ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK;
+	buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK, channel->hw_settle_time);
+	buf[6] &= ~ADC_TM5_M_CTL_CAL_SEL_MASK;
+	buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_CAL_SEL_MASK, channel->cal_method);
+
+	buf[7] |= ADC_TM5_M_MEAS_EN;
+
+	ret = adc_tm5_write(chip, reg, buf, sizeof(buf));
+	if (ret) {
+		dev_err(chip->dev, "channel %d params write failed: %d\n", channel->channel, ret);
+		return ret;
+	}
+
+	return adc_tm5_enable(chip);
+}
+
+static int adc_tm5_set_trips(void *data, int low, int high)
+{
+	struct adc_tm5_channel *channel = data;
+	struct adc_tm5_chip *chip;
+	int ret;
+
+	if (!channel)
+		return -EINVAL;
+
+	chip = channel->chip;
+	dev_dbg(chip->dev, "%d:low(mdegC):%d, high(mdegC):%d\n",
+		channel->channel, low, high);
+
+	if (high == INT_MAX && low <= -INT_MAX)
+		ret = adc_tm5_disable_channel(channel);
+	else
+		ret = adc_tm5_configure(channel, low, high);
+
+	return ret;
+}
+
+static struct thermal_zone_of_device_ops adc_tm5_ops = {
+	.get_temp = adc_tm5_get_temp,
+	.set_trips = adc_tm5_set_trips,
+};
+
+static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
+{
+	unsigned int i;
+	struct thermal_zone_device *tzd;
+
+	for (i = 0; i < adc_tm->nchannels; i++) {
+		adc_tm->channels[i].chip = adc_tm;
+
+		tzd = devm_thermal_zone_of_sensor_register(adc_tm->dev,
+							   adc_tm->channels[i].channel,
+							   &adc_tm->channels[i],
+							   &adc_tm5_ops);
+		if (IS_ERR(tzd)) {
+			dev_err(adc_tm->dev, "Error registering TZ zone for channel %d: %ld\n",
+				adc_tm->channels[i].channel, PTR_ERR(tzd));
+			return PTR_ERR(tzd);
+		}
+		adc_tm->channels[i].tzd = tzd;
+	}
+
+	return 0;
+}
+
+static int adc_tm5_init(struct adc_tm5_chip *chip)
+{
+	u8 buf[4], channels_available;
+	int ret;
+	unsigned int i;
+
+	for (i = 0; i < chip->nchannels; i++) {
+		if (chip->channels[i].channel >= channels_available) {
+			dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel);
+			return -EINVAL;
+		}
+	}
+
+	ret = adc_tm5_read(chip, ADC_TM5_NUM_BTM,
+			   &channels_available, sizeof(channels_available));
+	if (ret) {
+		dev_err(chip->dev, "read failed for BTM channels\n");
+		return ret;
+	}
+
+	buf[0] = chip->decimation;
+	buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN;
+	buf[2] = ADC_TM5_TIMER1;
+	buf[3] = FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL2_MASK, ADC_TM5_TIMER2) |
+		 FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL3_MASK, ADC_TM5_TIMER3);
+
+	ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf));
+	if (ret) {
+		dev_err(chip->dev, "block write failed: %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
+				       struct adc_tm5_channel *channel,
+				       struct device_node *node)
+{
+	const char *name = node->name;
+	u32 chan, value, varr[2];
+	int ret;
+	struct device *dev = adc_tm->dev;
+	struct of_phandle_args args;
+
+	ret = of_property_read_u32(node, "reg", &chan);
+	if (ret) {
+		dev_err(dev, "%s: invalid channel number %d\n", name, ret);
+		return ret;
+	}
+
+	if (chan >= ADC_TM5_NUM_CHANNELS) {
+		dev_err(dev, "%s: channel number too big: %d\n", name, chan);
+		return -EINVAL;
+	}
+
+	channel->channel = chan;
+
+	/*
+	 * We are tied to PMIC's ADC controller, which always use single
+	 * argument for channel number.  So don't bother parsing
+	 * #io-channel-cells, just enforce cell_count = 1.
+	 */
+	ret = of_parse_phandle_with_fixed_args(node, "io-channels", 1, 0, &args);
+	if (ret < 0) {
+		dev_err(dev, "%s: error parsing ADC channel number %d: %d\n", name, chan, ret);
+		return ret;
+	}
+	of_node_put(args.np);
+
+	if (args.args_count != 1 || args.args[0] >= ADC5_MAX_CHANNEL) {
+		dev_err(dev, "%s: invalid ADC channel number %d\n", name, chan);
+		return ret;
+	}
+	channel->adc_channel = args.args[0];
+
+	channel->iio = devm_of_iio_channel_get_by_name(adc_tm->dev, node, NULL);
+	if (IS_ERR(channel->iio)) {
+		ret = PTR_ERR(channel->iio);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "%s: error getting channel: %d\n", name, ret);
+		return ret;
+	}
+
+	ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
+	if (!ret) {
+		ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]);
+		if (ret < 0) {
+			dev_err(dev, "%s: invalid pre-scaling <%d %d>\n",
+				name, varr[0], varr[1]);
+			return ret;
+		}
+		channel->prescale = ret;
+	} else {
+		/* 1:1 prescale is index 0 */
+		channel->prescale = 0;
+	}
+
+	ret = of_property_read_u32(node, "qcom,hw-settle-time-us", &value);
+	if (!ret) {
+		ret = qcom_adc5_hw_settle_time_from_dt(value, adc_tm->data->hw_settle);
+		if (ret < 0) {
+			dev_err(dev, "%s invalid hw-settle-time-us %d us\n",
+				name, value);
+			return ret;
+		}
+		channel->hw_settle_time = ret;
+	} else {
+		channel->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
+	}
+
+	if (of_property_read_bool(node, "qcom,ratiometric"))
+		channel->cal_method = ADC_TM5_RATIOMETRIC_CAL;
+	else
+		channel->cal_method = ADC_TM5_ABSOLUTE_CAL;
+
+	return 0;
+}
+
+static int adc_tm5_get_dt_data(struct adc_tm5_chip *adc_tm, struct device_node *node)
+{
+	struct adc_tm5_channel *channels;
+	struct device_node *child;
+	u32 value;
+	int ret;
+	struct device *dev = adc_tm->dev;
+
+	adc_tm->nchannels = of_get_available_child_count(node);
+	if (!adc_tm->nchannels)
+		return -EINVAL;
+
+	adc_tm->channels = devm_kcalloc(dev, adc_tm->nchannels,
+					sizeof(*adc_tm->channels), GFP_KERNEL);
+	if (!adc_tm->channels)
+		return -ENOMEM;
+
+	channels = adc_tm->channels;
+
+	adc_tm->data = of_device_get_match_data(dev);
+	if (!adc_tm->data)
+		adc_tm->data = &adc_tm5_data_pmic;
+
+	ret = of_property_read_u32(node, "qcom,decimation", &value);
+	if (!ret) {
+		ret = qcom_adc5_decimation_from_dt(value, adc_tm->data->decimation);
+		if (ret < 0) {
+			dev_err(dev, "invalid decimation %d\n", value);
+			return ret;
+		}
+		adc_tm->decimation = ret;
+	} else {
+		adc_tm->decimation = ADC5_DECIMATION_DEFAULT;
+	}
+
+	ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+	if (!ret) {
+		ret = qcom_adc5_avg_samples_from_dt(value);
+		if (ret < 0) {
+			dev_err(dev, "invalid avg-samples %d\n", value);
+			return ret;
+		}
+		adc_tm->avg_samples = ret;
+	} else {
+		adc_tm->avg_samples = VADC_DEF_AVG_SAMPLES;
+	}
+
+	for_each_available_child_of_node(node, child) {
+		ret = adc_tm5_get_dt_channel_data(adc_tm, channels, child);
+		if (ret) {
+			of_node_put(child);
+			return ret;
+		}
+
+		channels++;
+	}
+
+	return 0;
+}
+
+static int adc_tm5_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct adc_tm5_chip *adc_tm;
+	struct regmap *regmap;
+	int ret, irq;
+	u32 reg;
+
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	ret = of_property_read_u32(node, "reg", &reg);
+	if (ret)
+		return ret;
+
+	adc_tm = devm_kzalloc(&pdev->dev, sizeof(*adc_tm), GFP_KERNEL);
+	if (!adc_tm)
+		return -ENOMEM;
+
+	adc_tm->regmap = regmap;
+	adc_tm->dev = dev;
+	adc_tm->base = reg;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "get_irq failed: %d\n", irq);
+		return irq;
+	}
+
+	ret = adc_tm5_get_dt_data(adc_tm, node);
+	if (ret) {
+		dev_err(dev, "get dt data failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = adc_tm5_init(adc_tm);
+	if (ret) {
+		dev_err(dev, "adc-tm init failed\n");
+		return ret;
+	}
+
+	ret = adc_tm5_register_tzd(adc_tm);
+	if (ret) {
+		dev_err(dev, "tzd register failed\n");
+		return ret;
+	}
+
+	return devm_request_threaded_irq(dev, irq, NULL, adc_tm5_isr,
+					 IRQF_ONESHOT, "pm-adc-tm5", adc_tm);
+}
+
+static const struct of_device_id adc_tm5_match_table[] = {
+	{
+		.compatible = "qcom,spmi-adc-tm5",
+		.data = &adc_tm5_data_pmic,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adc_tm5_match_table);
+
+static struct platform_driver adc_tm5_driver = {
+	.driver = {
+		.name = "qcom-spmi-adc-tm5",
+		.of_match_table = adc_tm5_match_table,
+	},
+	.probe = adc_tm5_probe,
+};
+module_platform_driver(adc_tm5_driver);
+
+MODULE_DESCRIPTION("SPMI PMIC Thermal Monitor ADC driver");
+MODULE_LICENSE("GPL v2");