thunderbolt: Add support for Internal Connection Manager (ICM)

Starting from Intel Falcon Ridge the internal connection manager running
on the Thunderbolt host controller has been supporting 4 security
levels. One reason for this is to prevent DMA attacks and only allow
connecting devices the user trusts.

The internal connection manager (ICM) is the preferred way of connecting
Thunderbolt devices over software only implementation typically used on
Macs. The driver communicates with ICM using special Thunderbolt ring 0
(control channel) messages. In order to handle these messages we add
support for the ICM messages to the control channel.

The security levels are as follows:

  none - No security, all tunnels are created automatically
  user - User needs to approve the device before tunnels are created
  secure - User need to approve the device before tunnels are created.
	   The device is sent a challenge on future connects to be able
	   to verify it is actually the approved device.
  dponly - Only Display Port and USB tunnels can be created and those
           are created automatically.

The security levels are typically configurable from the system BIOS and
by default it is set to "user" on many systems.

In this patch each Thunderbolt device will have either one or two new
sysfs attributes: authorized and key. The latter appears for devices
that support secure connect.

In order to identify the device the user can read identication
information, including UUID and name of the device from sysfs and based
on that make a decision to authorize the device. The device is
authorized by simply writing 1 to the "authorized" sysfs attribute. This
is following the USB bus device authorization mechanism. The secure
connect requires an additional challenge step (writing 2 to the
"authorized" attribute) in future connects when the key has already been
stored to the NVM of the device.

Non-ICM systems (before Alpine Ridge) continue to use the existing
functionality and the security level is set to none. For systems with
Alpine Ridge, even on Apple hardware, we will use ICM.

This code is based on the work done by Amir Levy and Michael Jamet.

Signed-off-by: Michael Jamet <michael.jamet@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 7 insertions, 0 deletions

diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index ea9de49b5e10..ad2304bad592 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -7,6 +7,7 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 
 #include "tb.h"
 #include "tb_regs.h"
@@ -71,6 +72,8 @@ static void tb_scan_port(struct tb_port *port)
 		return;
 	}
 
+	sw->authorized = true;
+
 	if (tb_switch_add(sw)) {
 		tb_switch_put(sw);
 		return;
@@ -443,10 +446,14 @@ struct tb *tb_probe(struct tb_nhi *nhi)
 	struct tb_cm *tcm;
 	struct tb *tb;
 
+	if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc."))
+		return NULL;
+
 	tb = tb_domain_alloc(nhi, sizeof(*tcm));
 	if (!tb)
 		return NULL;
 
+	tb->security_level = TB_SECURITY_NONE;
 	tb->cm_ops = &tb_cm_ops;
 
 	tcm = tb_priv(tb);