Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-latest

80 files changed, 46240 insertions, 1299 deletions

diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
new file mode 100644
index 000000000000..3fd7199301b6
--- /dev/null
+++ b/drivers/tty/Kconfig
@@ -0,0 +1,321 @@
+config VT
+	bool "Virtual terminal" if EXPERT
+	depends on !S390
+	select INPUT
+	default y
+	---help---
+	  If you say Y here, you will get support for terminal devices with
+	  display and keyboard devices. These are called "virtual" because you
+	  can run several virtual terminals (also called virtual consoles) on
+	  one physical terminal. This is rather useful, for example one
+	  virtual terminal can collect system messages and warnings, another
+	  one can be used for a text-mode user session, and a third could run
+	  an X session, all in parallel. Switching between virtual terminals
+	  is done with certain key combinations, usually Alt-<function key>.
+
+	  The setterm command ("man setterm") can be used to change the
+	  properties (such as colors or beeping) of a virtual terminal. The
+	  man page console_codes(4) ("man console_codes") contains the special
+	  character sequences that can be used to change those properties
+	  directly. The fonts used on virtual terminals can be changed with
+	  the setfont ("man setfont") command and the key bindings are defined
+	  with the loadkeys ("man loadkeys") command.
+
+	  You need at least one virtual terminal device in order to make use
+	  of your keyboard and monitor. Therefore, only people configuring an
+	  embedded system would want to say N here in order to save some
+	  memory; the only way to log into such a system is then via a serial
+	  or network connection.
+
+	  If unsure, say Y, or else you won't be able to do much with your new
+	  shiny Linux system :-)
+
+config CONSOLE_TRANSLATIONS
+	depends on VT
+	default y
+	bool "Enable character translations in console" if EXPERT
+	---help---
+	  This enables support for font mapping and Unicode translation
+	  on virtual consoles.
+
+config VT_CONSOLE
+	bool "Support for console on virtual terminal" if EXPERT
+	depends on VT
+	default y
+	---help---
+	  The system console is the device which receives all kernel messages
+	  and warnings and which allows logins in single user mode. If you
+	  answer Y here, a virtual terminal (the device used to interact with
+	  a physical terminal) can be used as system console. This is the most
+	  common mode of operations, so you should say Y here unless you want
+	  the kernel messages be output only to a serial port (in which case
+	  you should say Y to "Console on serial port", below).
+
+	  If you do say Y here, by default the currently visible virtual
+	  terminal (/dev/tty0) will be used as system console. You can change
+	  that with a kernel command line option such as "console=tty3" which
+	  would use the third virtual terminal as system console. (Try "man
+	  bootparam" or see the documentation of your boot loader (lilo or
+	  loadlin) about how to pass options to the kernel at boot time.)
+
+	  If unsure, say Y.
+
+config HW_CONSOLE
+	bool
+	depends on VT && !S390 && !UML
+	default y
+
+config VT_HW_CONSOLE_BINDING
+       bool "Support for binding and unbinding console drivers"
+       depends on HW_CONSOLE
+       default n
+       ---help---
+         The virtual terminal is the device that interacts with the physical
+         terminal through console drivers. On these systems, at least one
+         console driver is loaded. In other configurations, additional console
+         drivers may be enabled, such as the framebuffer console. If more than
+         1 console driver is enabled, setting this to 'y' will allow you to
+         select the console driver that will serve as the backend for the
+         virtual terminals.
+
+	 See <file:Documentation/console/console.txt> for more
+	 information. For framebuffer console users, please refer to
+	 <file:Documentation/fb/fbcon.txt>.
+
+config UNIX98_PTYS
+	bool "Unix98 PTY support" if EXPERT
+	default y
+	---help---
+	  A pseudo terminal (PTY) is a software device consisting of two
+	  halves: a master and a slave. The slave device behaves identical to
+	  a physical terminal; the master device is used by a process to
+	  read data from and write data to the slave, thereby emulating a
+	  terminal. Typical programs for the master side are telnet servers
+	  and xterms.
+
+	  Linux has traditionally used the BSD-like names /dev/ptyxx for
+	  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+	  has a number of problems. The GNU C library glibc 2.1 and later,
+	  however, supports the Unix98 naming standard: in order to acquire a
+	  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+	  terminal is then made available to the process and the pseudo
+	  terminal slave can be accessed as /dev/pts/<number>. What was
+	  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+	  All modern Linux systems use the Unix98 ptys.  Say Y unless
+	  you're on an embedded system and want to conserve memory.
+
+config DEVPTS_MULTIPLE_INSTANCES
+	bool "Support multiple instances of devpts"
+	depends on UNIX98_PTYS
+	default n
+	---help---
+	  Enable support for multiple instances of devpts filesystem.
+	  If you want to have isolated PTY namespaces (eg: in containers),
+	  say Y here.  Otherwise, say N. If enabled, each mount of devpts
+	  filesystem with the '-o newinstance' option will create an
+	  independent PTY namespace.
+
+config LEGACY_PTYS
+	bool "Legacy (BSD) PTY support"
+	default y
+	---help---
+	  A pseudo terminal (PTY) is a software device consisting of two
+	  halves: a master and a slave. The slave device behaves identical to
+	  a physical terminal; the master device is used by a process to
+	  read data from and write data to the slave, thereby emulating a
+	  terminal. Typical programs for the master side are telnet servers
+	  and xterms.
+
+	  Linux has traditionally used the BSD-like names /dev/ptyxx
+	  for masters and /dev/ttyxx for slaves of pseudo
+	  terminals. This scheme has a number of problems, including
+	  security.  This option enables these legacy devices; on most
+	  systems, it is safe to say N.
+
+
+config LEGACY_PTY_COUNT
+	int "Maximum number of legacy PTY in use"
+	depends on LEGACY_PTYS
+	range 0 256
+	default "256"
+	---help---
+	  The maximum number of legacy PTYs that can be used at any one time.
+	  The default is 256, and should be more than enough.  Embedded
+	  systems may want to reduce this to save memory.
+
+	  When not in use, each legacy PTY occupies 12 bytes on 32-bit
+	  architectures and 24 bytes on 64-bit architectures.
+
+config BFIN_JTAG_COMM
+	tristate "Blackfin JTAG Communication"
+	depends on BLACKFIN
+	help
+	  Add support for emulating a TTY device over the Blackfin JTAG.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin_jtag_comm.
+
+config BFIN_JTAG_COMM_CONSOLE
+	bool "Console on Blackfin JTAG"
+	depends on BFIN_JTAG_COMM=y
+
+config SERIAL_NONSTANDARD
+	bool "Non-standard serial port support"
+	depends on HAS_IOMEM
+	---help---
+	  Say Y here if you have any non-standard serial boards -- boards
+	  which aren't supported using the standard "dumb" serial driver.
+	  This includes intelligent serial boards such as Cyclades,
+	  Digiboards, etc. These are usually used for systems that need many
+	  serial ports because they serve many terminals or dial-in
+	  connections.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about non-standard serial boards.
+
+	  Most people can say N here.
+
+config ROCKETPORT
+	tristate "Comtrol RocketPort support"
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	help
+	  This driver supports Comtrol RocketPort and RocketModem PCI boards.   
+          These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
+          modems.  For information about the RocketPort/RocketModem  boards
+          and this driver read <file:Documentation/serial/rocket.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rocket.
+
+	  If you want to compile this driver into the kernel, say Y here.  If
+          you don't have a Comtrol RocketPort/RocketModem card installed, say N.
+
+config CYCLADES
+	tristate "Cyclades async mux support"
+	depends on SERIAL_NONSTANDARD && (PCI || ISA)
+	select FW_LOADER
+	---help---
+	  This driver supports Cyclades Z and Y multiserial boards.
+	  You would need something like this to connect more than two modems to
+	  your Linux box, for instance in order to become a dial-in server.
+
+	  For information about the Cyclades-Z card, read
+	  <file:Documentation/serial/README.cycladesZ>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyclades.
+
+	  If you haven't heard about it, it's safe to say N.
+
+config CYZ_INTR
+	bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && CYCLADES
+	help
+	  The Cyclades-Z family of multiport cards allows 2 (two) driver op
+	  modes: polling and interrupt. In polling mode, the driver will check
+	  the status of the Cyclades-Z ports every certain amount of time
+	  (which is called polling cycle and is configurable). In interrupt
+	  mode, it will use an interrupt line (IRQ) in order to check the
+	  status of the Cyclades-Z ports. The default op mode is polling. If
+	  unsure, say N.
+
+config MOXA_INTELLIO
+	tristate "Moxa Intellio support"
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	select FW_LOADER
+	help
+	  Say Y here if you have a Moxa Intellio multiport serial card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called moxa.
+
+config MOXA_SMARTIO
+	tristate "Moxa SmartIO support v. 2.0"
+	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+	help
+	  Say Y here if you have a Moxa SmartIO multiport serial card and/or
+	  want to help develop a new version of this driver.
+
+	  This is upgraded (1.9.1) driver from original Moxa drivers with
+	  changes finally resulting in PCI probing.
+
+	  This driver can also be built as a module. The module will be called
+	  mxser. If you want to do that, say M here.
+
+config SYNCLINK
+	tristate "Microgate SyncLink card support"
+	depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+	help
+	  Provides support for the SyncLink ISA and PCI multiprotocol serial
+	  adapters. These adapters support asynchronous and HDLC bit
+	  synchronous communication up to 10Mbps (PCI adapter).
+
+	  This driver can only be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called synclink.  If you want to do that, say M
+	  here.
+
+config SYNCLINKMP
+	tristate "SyncLink Multiport support"
+	depends on SERIAL_NONSTANDARD && PCI
+	help
+	  Enable support for the SyncLink Multiport (2 or 4 ports)
+	  serial adapter, running asynchronous and HDLC communications up
+	  to 2.048Mbps. Each ports is independently selectable for
+	  RS-232, V.35, RS-449, RS-530, and X.21
+
+	  This driver may be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called synclinkmp.  If you want to do that, say M
+	  here.
+
+config SYNCLINK_GT
+	tristate "SyncLink GT/AC support"
+	depends on SERIAL_NONSTANDARD && PCI
+	help
+	  Support for SyncLink GT and SyncLink AC families of
+	  synchronous and asynchronous serial adapters
+	  manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
+config NOZOMI
+	tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
+	depends on PCI && EXPERIMENTAL
+	help
+	  If you have a HSDPA driver Broadband Wireless Data Card -
+	  Globe Trotter PCMCIA card, say Y here.
+
+	  To compile this driver as a module, choose M here, the module
+	  will be called nozomi.
+
+config ISI
+	tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
+	depends on SERIAL_NONSTANDARD && PCI
+	select FW_LOADER
+	help
+	  This is a driver for the Multi-Tech cards which provide several
+	  serial ports.  The driver is experimental and can currently only be
+	  built as a module. The module will be called isicom.
+	  If you want to do that, choose M here.
+
+config N_HDLC
+	tristate "HDLC line discipline support"
+	depends on SERIAL_NONSTANDARD
+	help
+	  Allows synchronous HDLC communications with tty device drivers that
+	  support synchronous HDLC such as the Microgate SyncLink adapter.
+
+	  This driver can be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called n_hdlc. If you want to do that, say M
+	  here.
+
+config N_GSM
+	tristate "GSM MUX line discipline support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on NET
+	help
+	  This line discipline provides support for the GSM MUX protocol and
+	  presents the mux as a set of 61 individual tty devices.
+
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 396277216e4f..690522fcb338 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -11,3 +11,18 @@ obj-$(CONFIG_R3964)		+= n_r3964.o
 obj-y				+= vt/
 obj-$(CONFIG_HVC_DRIVER)	+= hvc/
 obj-y				+= serial/
+
+# tty drivers
+obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
+obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o
+obj-$(CONFIG_CYCLADES)		+= cyclades.o
+obj-$(CONFIG_ISI)		+= isicom.o
+obj-$(CONFIG_MOXA_INTELLIO)	+= moxa.o
+obj-$(CONFIG_MOXA_SMARTIO)	+= mxser.o
+obj-$(CONFIG_NOZOMI)		+= nozomi.o
+obj-$(CONFIG_ROCKETPORT)	+= rocket.o
+obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o
+obj-$(CONFIG_SYNCLINKMP)	+= synclinkmp.o
+obj-$(CONFIG_SYNCLINK)		+= synclink.o
+
+obj-y += ipwireless/
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
new file mode 100644
index 000000000000..f214e5022472
--- /dev/null
+++ b/drivers/tty/amiserial.c
@@ -0,0 +1,2178 @@
+/*
+ *  linux/drivers/char/amiserial.c
+ *
+ * Serial driver for the amiga builtin port.
+ *
+ * This code was created by taking serial.c version 4.30 from kernel
+ * release 2.3.22, replacing all hardware related stuff with the
+ * corresponding amiga hardware actions, and removing all irrelevant
+ * code. As a consequence, it uses many of the constants and names
+ * associated with the registers and bits of 16550 compatible UARTS -
+ * but only to keep track of status, etc in the state variables. It
+ * was done this was to make it easier to keep the code in line with
+ * (non hardware specific) changes to serial.c.
+ *
+ * The port is registered with the tty driver as minor device 64, and
+ * therefore other ports should should only use 65 upwards.
+ *
+ * Richard Lucock 28/12/99
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 
+ * 		1998, 1999  Theodore Ts'o
+ *
+ */
+
+/*
+ * Serial driver configuration section.  Here are the various options:
+ *
+ * SERIAL_PARANOIA_CHECK
+ * 		Check the magic number for the async_structure where
+ * 		ever possible.
+ */
+
+#include <linux/delay.h>
+
+#undef SERIAL_PARANOIA_CHECK
+#define SERIAL_DO_RESTART
+
+/* Set of debugging defines */
+
+#undef SERIAL_DEBUG_INTR
+#undef SERIAL_DEBUG_OPEN
+#undef SERIAL_DEBUG_FLOW
+#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+
+/* Sanity checks */
+
+#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
+#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
+ tty->name, (info->flags), serial_driver->refcount,info->count,tty->count,s)
+#else
+#define DBG_CNT(s)
+#endif
+
+/*
+ * End of serial driver configuration section.
+ */
+
+#include <linux/module.h>
+
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/serial_reg.h>
+static char *serial_version = "4.30";
+
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/console.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+
+#include <asm/setup.h>
+
+#include <asm/system.h>
+
+#include <asm/irq.h>
+
+#include <asm/amigahw.h>
+#include <asm/amigaints.h>
+
+#define custom amiga_custom
+static char *serial_name = "Amiga-builtin serial driver";
+
+static struct tty_driver *serial_driver;
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+static struct async_struct *IRQ_ports;
+
+static unsigned char current_ctl_bits;
+
+static void change_speed(struct async_struct *info, struct ktermios *old);
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
+
+
+static struct serial_state rs_table[1];
+
+#define NR_PORTS ARRAY_SIZE(rs_table)
+
+#include <asm/uaccess.h>
+
+#define serial_isroot()	(capable(CAP_SYS_ADMIN))
+
+
+static inline int serial_paranoia_check(struct async_struct *info,
+					char *name, const char *routine)
+{
+#ifdef SERIAL_PARANOIA_CHECK
+	static const char *badmagic =
+		"Warning: bad magic number for serial struct (%s) in %s\n";
+	static const char *badinfo =
+		"Warning: null async_struct for (%s) in %s\n";
+
+	if (!info) {
+		printk(badinfo, name, routine);
+		return 1;
+	}
+	if (info->magic != SERIAL_MAGIC) {
+		printk(badmagic, name, routine);
+		return 1;
+	}
+#endif
+	return 0;
+}
+
+/* some serial hardware definitions */
+#define SDR_OVRUN   (1<<15)
+#define SDR_RBF     (1<<14)
+#define SDR_TBE     (1<<13)
+#define SDR_TSRE    (1<<12)
+
+#define SERPER_PARENB    (1<<15)
+
+#define AC_SETCLR   (1<<15)
+#define AC_UARTBRK  (1<<11)
+
+#define SER_DTR     (1<<7)
+#define SER_RTS     (1<<6)
+#define SER_DCD     (1<<5)
+#define SER_CTS     (1<<4)
+#define SER_DSR     (1<<3)
+
+static __inline__ void rtsdtr_ctrl(int bits)
+{
+    ciab.pra = ((bits & (SER_RTS | SER_DTR)) ^ (SER_RTS | SER_DTR)) | (ciab.pra & ~(SER_RTS | SER_DTR));
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop() and rs_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ * ------------------------------------------------------------
+ */
+static void rs_stop(struct tty_struct *tty)
+{
+	struct async_struct *info = tty->driver_data;
+	unsigned long flags;
+
+	if (serial_paranoia_check(info, tty->name, "rs_stop"))
+		return;
+
+	local_irq_save(flags);
+	if (info->IER & UART_IER_THRI) {
+		info->IER &= ~UART_IER_THRI;
+		/* disable Tx interrupt and remove any pending interrupts */
+		custom.intena = IF_TBE;
+		mb();
+		custom.intreq = IF_TBE;
+		mb();
+	}
+	local_irq_restore(flags);
+}
+
+static void rs_start(struct tty_struct *tty)
+{
+	struct async_struct *info = tty->driver_data;
+	unsigned long flags;
+
+	if (serial_paranoia_check(info, tty->name, "rs_start"))
+		return;
+
+	local_irq_save(flags);
+	if (info->xmit.head != info->xmit.tail
+	    && info->xmit.buf
+	    && !(info->IER & UART_IER_THRI)) {
+		info->IER |= UART_IER_THRI;
+		custom.intena = IF_SETCLR | IF_TBE;
+		mb();
+		/* set a pending Tx Interrupt, transmitter should restart now */
+		custom.intreq = IF_SETCLR | IF_TBE;
+		mb();
+	}
+	local_irq_restore(flags);
+}
+
+/*
+ * ----------------------------------------------------------------------
+ *
+ * Here starts the interrupt handling routines.  All of the following
+ * subroutines are declared as inline and are folded into
+ * rs_interrupt().  They were separated out for readability's sake.
+ *
+ * Note: rs_interrupt() is a "fast" interrupt, which means that it
+ * runs with interrupts turned off.  People who may want to modify
+ * rs_interrupt() should try to keep the interrupt handler as fast as
+ * possible.  After you are done making modifications, it is not a bad
+ * idea to do:
+ * 
+ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
+ *
+ * and look at the resulting assemble code in serial.s.
+ *
+ * 				- Ted Ts'o (tytso@mit.edu), 7-Mar-93
+ * -----------------------------------------------------------------------
+ */
+
+/*
+ * This routine is used by the interrupt handler to schedule
+ * processing in the software interrupt portion of the driver.
+ */
+static void rs_sched_event(struct async_struct *info,
+			   int event)
+{
+	info->event |= 1 << event;
+	tasklet_schedule(&info->tlet);
+}
+
+static void receive_chars(struct async_struct *info)
+{
+        int status;
+	int serdatr;
+	struct tty_struct *tty = info->tty;
+	unsigned char ch, flag;
+	struct	async_icount *icount;
+	int oe = 0;
+
+	icount = &info->state->icount;
+
+	status = UART_LSR_DR; /* We obviously have a character! */
+	serdatr = custom.serdatr;
+	mb();
+	custom.intreq = IF_RBF;
+	mb();
+
+	if((serdatr & 0x1ff) == 0)
+	    status |= UART_LSR_BI;
+	if(serdatr & SDR_OVRUN)
+	    status |= UART_LSR_OE;
+
+	ch = serdatr & 0xff;
+	icount->rx++;
+
+#ifdef SERIAL_DEBUG_INTR
+	printk("DR%02x:%02x...", ch, status);
+#endif
+	flag = TTY_NORMAL;
+
+	/*
+	 * We don't handle parity or frame errors - but I have left
+	 * the code in, since I'm not sure that the errors can't be
+	 * detected.
+	 */
+
+	if (status & (UART_LSR_BI | UART_LSR_PE |
+		      UART_LSR_FE | UART_LSR_OE)) {
+	  /*
+	   * For statistics only
+	   */
+	  if (status & UART_LSR_BI) {
+	    status &= ~(UART_LSR_FE | UART_LSR_PE);
+	    icount->brk++;
+	  } else if (status & UART_LSR_PE)
+	    icount->parity++;
+	  else if (status & UART_LSR_FE)
+	    icount->frame++;
+	  if (status & UART_LSR_OE)
+	    icount->overrun++;
+
+	  /*
+	   * Now check to see if character should be
+	   * ignored, and mask off conditions which
+	   * should be ignored.
+	   */
+	  if (status & info->ignore_status_mask)
+	    goto out;
+
+	  status &= info->read_status_mask;
+
+	  if (status & (UART_LSR_BI)) {
+#ifdef SERIAL_DEBUG_INTR
+	    printk("handling break....");
+#endif
+	    flag = TTY_BREAK;
+	    if (info->flags & ASYNC_SAK)
+	      do_SAK(tty);
+	  } else if (status & UART_LSR_PE)
+	    flag = TTY_PARITY;
+	  else if (status & UART_LSR_FE)
+	    flag = TTY_FRAME;
+	  if (status & UART_LSR_OE) {
+	    /*
+	     * Overrun is special, since it's
+	     * reported immediately, and doesn't
+	     * affect the current character
+	     */
+	     oe = 1;
+	  }
+	}
+	tty_insert_flip_char(tty, ch, flag);
+	if (oe == 1)
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+	tty_flip_buffer_push(tty);
+out:
+	return;
+}
+
+static void transmit_chars(struct async_struct *info)
+{
+	custom.intreq = IF_TBE;
+	mb();
+	if (info->x_char) {
+	        custom.serdat = info->x_char | 0x100;
+		mb();
+		info->state->icount.tx++;
+		info->x_char = 0;
+		return;
+	}
+	if (info->xmit.head == info->xmit.tail
+	    || info->tty->stopped
+	    || info->tty->hw_stopped) {
+		info->IER &= ~UART_IER_THRI;
+	        custom.intena = IF_TBE;
+		mb();
+		return;
+	}
+
+	custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100;
+	mb();
+	info->xmit.tail = info->xmit.tail & (SERIAL_XMIT_SIZE-1);
+	info->state->icount.tx++;
+
+	if (CIRC_CNT(info->xmit.head,
+		     info->xmit.tail,
+		     SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
+		rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
+
+#ifdef SERIAL_DEBUG_INTR
+	printk("THRE...");
+#endif
+	if (info->xmit.head == info->xmit.tail) {
+	        custom.intena = IF_TBE;
+		mb();
+		info->IER &= ~UART_IER_THRI;
+	}
+}
+
+static void check_modem_status(struct async_struct *info)
+{
+	unsigned char status = ciab.pra & (SER_DCD | SER_CTS | SER_DSR);
+	unsigned char dstatus;
+	struct	async_icount *icount;
+
+	/* Determine bits that have changed */
+	dstatus = status ^ current_ctl_bits;
+	current_ctl_bits = status;
+
+	if (dstatus) {
+		icount = &info->state->icount;
+		/* update input line counters */
+		if (dstatus & SER_DSR)
+			icount->dsr++;
+		if (dstatus & SER_DCD) {
+			icount->dcd++;
+#ifdef CONFIG_HARD_PPS
+			if ((info->flags & ASYNC_HARDPPS_CD) &&
+			    !(status & SER_DCD))
+				hardpps();
+#endif
+		}
+		if (dstatus & SER_CTS)
+			icount->cts++;
+		wake_up_interruptible(&info->delta_msr_wait);
+	}
+
+	if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) {
+#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
+		printk("ttyS%d CD now %s...", info->line,
+		       (!(status & SER_DCD)) ? "on" : "off");
+#endif
+		if (!(status & SER_DCD))
+			wake_up_interruptible(&info->open_wait);
+		else {
+#ifdef SERIAL_DEBUG_OPEN
+			printk("doing serial hangup...");
+#endif
+			if (info->tty)
+				tty_hangup(info->tty);
+		}
+	}
+	if (info->flags & ASYNC_CTS_FLOW) {
+		if (info->tty->hw_stopped) {
+			if (!(status & SER_CTS)) {
+#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
+				printk("CTS tx start...");
+#endif
+				info->tty->hw_stopped = 0;
+				info->IER |= UART_IER_THRI;
+				custom.intena = IF_SETCLR | IF_TBE;
+				mb();
+				/* set a pending Tx Interrupt, transmitter should restart now */
+				custom.intreq = IF_SETCLR | IF_TBE;
+				mb();
+				rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
+				return;
+			}
+		} else {
+			if ((status & SER_CTS)) {
+#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
+				printk("CTS tx stop...");
+#endif
+				info->tty->hw_stopped = 1;
+				info->IER &= ~UART_IER_THRI;
+				/* disable Tx interrupt and remove any pending interrupts */
+				custom.intena = IF_TBE;
+				mb();
+				custom.intreq = IF_TBE;
+				mb();
+			}
+		}
+	}
+}
+
+static irqreturn_t ser_vbl_int( int irq, void *data)
+{
+        /* vbl is just a periodic interrupt we tie into to update modem status */
+	struct async_struct * info = IRQ_ports;
+	/*
+	 * TBD - is it better to unregister from this interrupt or to
+	 * ignore it if MSI is clear ?
+	 */
+	if(info->IER & UART_IER_MSI)
+	  check_modem_status(info);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ser_rx_int(int irq, void *dev_id)
+{
+	struct async_struct * info;
+
+#ifdef SERIAL_DEBUG_INTR
+	printk("ser_rx_int...");
+#endif
+
+	info = IRQ_ports;
+	if (!info || !info->tty)
+		return IRQ_NONE;
+
+	receive_chars(info);
+	info->last_active = jiffies;
+#ifdef SERIAL_DEBUG_INTR
+	printk("end.\n");
+#endif
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ser_tx_int(int irq, void *dev_id)
+{
+	struct async_struct * info;
+
+	if (custom.serdatr & SDR_TBE) {
+#ifdef SERIAL_DEBUG_INTR
+	  printk("ser_tx_int...");
+#endif
+
+	  info = IRQ_ports;
+	  if (!info || !info->tty)
+		return IRQ_NONE;
+
+	  transmit_chars(info);
+	  info->last_active = jiffies;
+#ifdef SERIAL_DEBUG_INTR
+	  printk("end.\n");
+#endif
+	}
+	return IRQ_HANDLED;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * Here ends the serial interrupt routines.
+ * -------------------------------------------------------------------
+ */
+
+/*
+ * This routine is used to handle the "bottom half" processing for the
+ * serial driver, known also the "software interrupt" processing.
+ * This processing is done at the kernel interrupt level, after the
+ * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON.  This
+ * is where time-consuming activities which can not be done in the
+ * interrupt driver proper are done; the interrupt driver schedules
+ * them using rs_sched_event(), and they get done here.
+ */
+
+static void do_softint(unsigned long private_)
+{
+	struct async_struct	*info = (struct async_struct *) private_;
+	struct tty_struct	*tty;
+
+	tty = info->tty;
+	if (!tty)
+		return;
+
+	if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
+		tty_wakeup(tty);
+}
+
+/*
+ * ---------------------------------------------------------------
+ * Low level utility subroutines for the serial driver:  routines to
+ * figure out the appropriate timeout for an interrupt chain, routines
+ * to initialize and startup a serial port, and routines to shutdown a
+ * serial port.  Useful stuff like that.
+ * ---------------------------------------------------------------
+ */
+
+static int startup(struct async_struct * info)
+{
+	unsigned long flags;
+	int	retval=0;
+	unsigned long page;
+
+	page = get_zeroed_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+
+	local_irq_save(flags);
+
+	if (info->flags & ASYNC_INITIALIZED) {
+		free_page(page);
+		goto errout;
+	}
+
+	if (info->xmit.buf)
+		free_page(page);
+	else
+		info->xmit.buf = (unsigned char *) page;
+
+#ifdef SERIAL_DEBUG_OPEN
+	printk("starting up ttys%d ...", info->line);
+#endif
+
+	/* Clear anything in the input buffer */
+
+	custom.intreq = IF_RBF;
+	mb();
+
+	retval = request_irq(IRQ_AMIGA_VERTB, ser_vbl_int, 0, "serial status", info);
+	if (retval) {
+	  if (serial_isroot()) {
+	    if (info->tty)
+	      set_bit(TTY_IO_ERROR,
+		      &info->tty->flags);
+	    retval = 0;
+	  }
+	  goto errout;
+	}
+
+	/* enable both Rx and Tx interrupts */
+	custom.intena = IF_SETCLR | IF_RBF | IF_TBE;
+	mb();
+	info->IER = UART_IER_MSI;
+
+	/* remember current state of the DCD and CTS bits */
+	current_ctl_bits = ciab.pra & (SER_DCD | SER_CTS | SER_DSR);
+
+	IRQ_ports = info;
+
+	info->MCR = 0;
+	if (info->tty->termios->c_cflag & CBAUD)
+	  info->MCR = SER_DTR | SER_RTS;
+	rtsdtr_ctrl(info->MCR);
+
+	if (info->tty)
+		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+	info->xmit.head = info->xmit.tail = 0;
+
+	/*
+	 * Set up the tty->alt_speed kludge
+	 */
+	if (info->tty) {
+		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+			info->tty->alt_speed = 57600;
+		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+			info->tty->alt_speed = 115200;
+		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+			info->tty->alt_speed = 230400;
+		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+			info->tty->alt_speed = 460800;
+	}
+
+	/*
+	 * and set the speed of the serial port
+	 */
+	change_speed(info, NULL);
+
+	info->flags |= ASYNC_INITIALIZED;
+	local_irq_restore(flags);
+	return 0;
+
+errout:
+	local_irq_restore(flags);
+	return retval;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void shutdown(struct async_struct * info)
+{
+	unsigned long	flags;
+	struct serial_state *state;
+
+	if (!(info->flags & ASYNC_INITIALIZED))
+		return;
+
+	state = info->state;
+
+#ifdef SERIAL_DEBUG_OPEN
+	printk("Shutting down serial port %d ....\n", info->line);
+#endif
+
+	local_irq_save(flags); /* Disable interrupts */
+
+	/*
+	 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
+	 * here so the queue might never be waken up
+	 */
+	wake_up_interruptible(&info->delta_msr_wait);
+
+	IRQ_ports = NULL;
+
+	/*
+	 * Free the IRQ, if necessary
+	 */
+	free_irq(IRQ_AMIGA_VERTB, info);
+
+	if (info->xmit.buf) {
+		free_page((unsigned long) info->xmit.buf);
+		info->xmit.buf = NULL;
+	}
+
+	info->IER = 0;
+	custom.intena = IF_RBF | IF_TBE;
+	mb();
+
+	/* disable break condition */
+	custom.adkcon = AC_UARTBRK;
+	mb();
+
+	if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+		info->MCR &= ~(SER_DTR|SER_RTS);
+	rtsdtr_ctrl(info->MCR);
+
+	if (info->tty)
+		set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+	info->flags &= ~ASYNC_INITIALIZED;
+	local_irq_restore(flags);
+}
+
+
+/*
+ * This routine is called to set the UART divisor registers to match
+ * the specified baud rate for a serial port.
+ */
+static void change_speed(struct async_struct *info,
+			 struct ktermios *old_termios)
+{
+	int	quot = 0, baud_base, baud;
+	unsigned cflag, cval = 0;
+	int	bits;
+	unsigned long	flags;
+
+	if (!info->tty || !info->tty->termios)
+		return;
+	cflag = info->tty->termios->c_cflag;
+
+	/* Byte size is always 8 bits plus parity bit if requested */
+
+	cval = 3; bits = 10;
+	if (cflag & CSTOPB) {
+		cval |= 0x04;
+		bits++;
+	}
+	if (cflag & PARENB) {
+		cval |= UART_LCR_PARITY;
+		bits++;
+	}
+	if (!(cflag & PARODD))
+		cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+	if (cflag & CMSPAR)
+		cval |= UART_LCR_SPAR;
+#endif
+
+	/* Determine divisor based on baud rate */
+	baud = tty_get_baud_rate(info->tty);
+	if (!baud)
+		baud = 9600;	/* B0 transition handled in rs_set_termios */
+	baud_base = info->state->baud_base;
+	if (baud == 38400 &&
+	    ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+		quot = info->state->custom_divisor;
+	else {
+		if (baud == 134)
+			/* Special case since 134 is really 134.5 */
+			quot = (2*baud_base / 269);
+		else if (baud)
+			quot = baud_base / baud;
+	}
+	/* If the quotient is zero refuse the change */
+	if (!quot && old_termios) {
+		/* FIXME: Will need updating for new tty in the end */
+		info->tty->termios->c_cflag &= ~CBAUD;
+		info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
+		baud = tty_get_baud_rate(info->tty);
+		if (!baud)
+			baud = 9600;
+		if (baud == 38400 &&
+		    ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+			quot = info->state->custom_divisor;
+		else {
+			if (baud == 134)
+				/* Special case since 134 is really 134.5 */
+				quot = (2*baud_base / 269);
+			else if (baud)
+				quot = baud_base / baud;
+		}
+	}
+	/* As a last resort, if the quotient is zero, default to 9600 bps */
+	if (!quot)
+		quot = baud_base / 9600;
+	info->quot = quot;
+	info->timeout = ((info->xmit_fifo_size*HZ*bits*quot) / baud_base);
+	info->timeout += HZ/50;		/* Add .02 seconds of slop */
+
+	/* CTS flow control flag and modem status interrupts */
+	info->IER &= ~UART_IER_MSI;
+	if (info->flags & ASYNC_HARDPPS_CD)
+		info->IER |= UART_IER_MSI;
+	if (cflag & CRTSCTS) {
+		info->flags |= ASYNC_CTS_FLOW;
+		info->IER |= UART_IER_MSI;
+	} else
+		info->flags &= ~ASYNC_CTS_FLOW;
+	if (cflag & CLOCAL)
+		info->flags &= ~ASYNC_CHECK_CD;
+	else {
+		info->flags |= ASYNC_CHECK_CD;
+		info->IER |= UART_IER_MSI;
+	}
+	/* TBD:
+	 * Does clearing IER_MSI imply that we should disable the VBL interrupt ?
+	 */
+
+	/*
+	 * Set up parity check flag
+	 */
+
+	info->read_status_mask = UART_LSR_OE | UART_LSR_DR;
+	if (I_INPCK(info->tty))
+		info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+	if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+		info->read_status_mask |= UART_LSR_BI;
+
+	/*
+	 * Characters to ignore
+	 */
+	info->ignore_status_mask = 0;
+	if (I_IGNPAR(info->tty))
+		info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+	if (I_IGNBRK(info->tty)) {
+		info->ignore_status_mask |= UART_LSR_BI;
+		/*
+		 * If we're ignore parity and break indicators, ignore 
+		 * overruns too.  (For real raw support).
+		 */
+		if (I_IGNPAR(info->tty))
+			info->ignore_status_mask |= UART_LSR_OE;
+	}
+	/*
+	 * !!! ignore all characters if CREAD is not set
+	 */
+	if ((cflag & CREAD) == 0)
+		info->ignore_status_mask |= UART_LSR_DR;
+	local_irq_save(flags);
+
+	{
+	  short serper;
+
+	/* Set up the baud rate */
+	  serper = quot - 1;
+
+	/* Enable or disable parity bit */
+
+	if(cval & UART_LCR_PARITY)
+	  serper |= (SERPER_PARENB);
+
+	custom.serper = serper;
+	mb();
+	}
+
+	info->LCR = cval;				/* Save LCR */
+	local_irq_restore(flags);
+}
+
+static int rs_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct async_struct *info;
+	unsigned long flags;
+
+	info = tty->driver_data;
+
+	if (serial_paranoia_check(info, tty->name, "rs_put_char"))
+		return 0;
+
+	if (!info->xmit.buf)
+		return 0;
+
+	local_irq_save(flags);
+	if (CIRC_SPACE(info->xmit.head,
+		       info->xmit.tail,
+		       SERIAL_XMIT_SIZE) == 0) {
+		local_irq_restore(flags);
+		return 0;
+	}
+
+	info->xmit.buf[info->xmit.head++] = ch;
+	info->xmit.head &= SERIAL_XMIT_SIZE-1;
+	local_irq_restore(flags);
+	return 1;
+}
+
+static void rs_flush_chars(struct tty_struct *tty)
+{
+	struct async_struct *info = tty->driver_data;
+	unsigned long flags;
+
+	if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
+		return;
+
+	if (info->xmit.head == info->xmit.tail
+	    || tty->stopped
+	    || tty->hw_stopped
+	    || !info->xmit.buf)
+		return;
+
+	local_irq_save(flags);
+	info->IER |= UART_IER_THRI;
+	custom.intena = IF_SETCLR | IF_TBE;
+	mb();
+	/* set a pending Tx Interrupt, transmitter should restart now */
+	custom.intreq = IF_SETCLR | IF_TBE;
+	mb();
+	local_irq_restore(flags);
+}
+
+static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count)
+{
+	int	c, ret = 0;
+	struct async_struct *info;
+	unsigned long flags;
+
+	info = tty->driver_data;
+
+	if (serial_paranoia_check(info, tty->name, "rs_write"))
+		return 0;
+
+	if (!info->xmit.buf)
+		return 0;
+
+	local_irq_save(flags);
+	while (1) {
+		c = CIRC_SPACE_TO_END(info->xmit.head,
+				      info->xmit.tail,
+				      SERIAL_XMIT_SIZE);
+		if (count < c)
+			c = count;
+		if (c <= 0) {
+			break;
+		}
+		memcpy(info->xmit.buf + info->xmit.head, buf, c);
+		info->xmit.head = ((info->xmit.head + c) &
+				   (SERIAL_XMIT_SIZE-1));
+		buf += c;
+		count -= c;
+		ret += c;
+	}
+	local_irq_restore(flags);
+
+	if (info->xmit.head != info->xmit.tail
+	    && !tty->stopped
+	    && !tty->hw_stopped
+	    && !(info->IER & UART_IER_THRI)) {
+		info->IER |= UART_IER_THRI;
+		local_irq_disable();
+		custom.intena = IF_SETCLR | IF_TBE;
+		mb();
+		/* set a pending Tx Interrupt, transmitter should restart now */
+		custom.intreq = IF_SETCLR | IF_TBE;
+		mb();
+		local_irq_restore(flags);
+	}
+	return ret;
+}
+
+static int rs_write_room(struct tty_struct *tty)
+{
+	struct async_struct *info = tty->driver_data;
+
+	if (serial_paranoia_check(info, tty->name, "rs_write_room"))
+		return 0;
+	return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+static int rs_chars_in_buffer(struct tty_struct *tty)
+{
+	struct async_struct *info = tty->driver_data;
+
+	if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
+		return 0;
+	return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+static void rs_flush_buffer(struct tty_struct *tty)
+{
+	struct async_struct *info = tty->driver_data;
+	unsigned long flags;
+
+	if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
+		return;
+	local_irq_save(flags);
+	info->xmit.head = info->xmit.tail = 0;
+	local_irq_restore(flags);
+	tty_wakeup(tty);
+}
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ */
+static void rs_send_xchar(struct tty_struct *tty, char ch)
+{
+	struct async_struct *info = tty->driver_data;
+        unsigned long flags;
+
+	if (serial_paranoia_check(info, tty->name, "rs_send_char"))
+		return;
+
+	info->x_char = ch;
+	if (ch) {
+		/* Make sure transmit interrupts are on */
+
+	        /* Check this ! */
+	        local_irq_save(flags);
+		if(!(custom.intenar & IF_TBE)) {
+		    custom.intena = IF_SETCLR | IF_TBE;
+		    mb();
+		    /* set a pending Tx Interrupt, transmitter should restart now */
+		    custom.intreq = IF_SETCLR | IF_TBE;
+		    mb();
+		}
+		local_irq_restore(flags);
+
+		info->IER |= UART_IER_THRI;
+	}
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_throttle()
+ * 
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ */
+static void rs_throttle(struct tty_struct * tty)
+{
+	struct async_struct *info = tty->driver_data;
+	unsigned long flags;
+#ifdef SERIAL_DEBUG_THROTTLE
+	char	buf[64];
+
+	printk("throttle %s: %d....\n", tty_name(tty, buf),
+	       tty->ldisc.chars_in_buffer(tty));
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "rs_throttle"))
+		return;
+
+	if (I_IXOFF(tty))
+		rs_send_xchar(tty, STOP_CHAR(tty));
+
+	if (tty->termios->c_cflag & CRTSCTS)
+		info->MCR &= ~SER_RTS;
+
+	local_irq_save(flags);
+	rtsdtr_ctrl(info->MCR);
+	local_irq_restore(flags);
+}
+
+static void rs_unthrottle(struct tty_struct * tty)
+{
+	struct async_struct *info = tty->driver_data;
+	unsigned long flags;
+#ifdef SERIAL_DEBUG_THROTTLE
+	char	buf[64];
+
+	printk("unthrottle %s: %d....\n", tty_name(tty, buf),
+	       tty->ldisc.chars_in_buffer(tty));
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
+		return;
+
+	if (I_IXOFF(tty)) {
+		if (info->x_char)
+			info->x_char = 0;
+		else
+			rs_send_xchar(tty, START_CHAR(tty));
+	}
+	if (tty->termios->c_cflag & CRTSCTS)
+		info->MCR |= SER_RTS;
+	local_irq_save(flags);
+	rtsdtr_ctrl(info->MCR);
+	local_irq_restore(flags);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_ioctl() and friends
+ * ------------------------------------------------------------
+ */
+
+static int get_serial_info(struct async_struct * info,
+			   struct serial_struct __user * retinfo)
+{
+	struct serial_struct tmp;
+	struct serial_state *state = info->state;
+   
+	if (!retinfo)
+		return -EFAULT;
+	memset(&tmp, 0, sizeof(tmp));
+	tty_lock();
+	tmp.type = state->type;
+	tmp.line = state->line;
+	tmp.port = state->port;
+	tmp.irq = state->irq;
+	tmp.flags = state->flags;
+	tmp.xmit_fifo_size = state->xmit_fifo_size;
+	tmp.baud_base = state->baud_base;
+	tmp.close_delay = state->close_delay;
+	tmp.closing_wait = state->closing_wait;
+	tmp.custom_divisor = state->custom_divisor;
+	tty_unlock();
+	if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+static int set_serial_info(struct async_struct * info,
+			   struct serial_struct __user * new_info)
+{
+	struct serial_struct new_serial;
+ 	struct serial_state old_state, *state;
+	unsigned int		change_irq,change_port;
+	int 			retval = 0;
+
+	if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
+		return -EFAULT;
+
+	tty_lock();
+	state = info->state;
+	old_state = *state;
+  
+	change_irq = new_serial.irq != state->irq;
+	change_port = (new_serial.port != state->port);
+	if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size)) {
+	  tty_unlock();
+	  return -EINVAL;
+	}
+  
+	if (!serial_isroot()) {
+		if ((new_serial.baud_base != state->baud_base) ||
+		    (new_serial.close_delay != state->close_delay) ||
+		    (new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
+		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
+		     (state->flags & ~ASYNC_USR_MASK)))
+			return -EPERM;
+		state->flags = ((state->flags & ~ASYNC_USR_MASK) |
+			       (new_serial.flags & ASYNC_USR_MASK));
+		info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+			       (new_serial.flags & ASYNC_USR_MASK));
+		state->custom_divisor = new_serial.custom_divisor;
+		goto check_and_exit;
+	}
+
+	if (new_serial.baud_base < 9600) {
+		tty_unlock();
+		return -EINVAL;
+	}
+
+	/*
+	 * OK, past this point, all the error checking has been done.
+	 * At this point, we start making changes.....
+	 */
+
+	state->baud_base = new_serial.baud_base;
+	state->flags = ((state->flags & ~ASYNC_FLAGS) |
+			(new_serial.flags & ASYNC_FLAGS));
+	info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
+		       (info->flags & ASYNC_INTERNAL_FLAGS));
+	state->custom_divisor = new_serial.custom_divisor;
+	state->close_delay = new_serial.close_delay * HZ/100;
+	state->closing_wait = new_serial.closing_wait * HZ/100;
+	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+check_and_exit:
+	if (info->flags & ASYNC_INITIALIZED) {
+		if (((old_state.flags & ASYNC_SPD_MASK) !=
+		     (state->flags & ASYNC_SPD_MASK)) ||
+		    (old_state.custom_divisor != state->custom_divisor)) {
+			if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+				info->tty->alt_speed = 57600;
+			if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+				info->tty->alt_speed = 115200;
+			if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+				info->tty->alt_speed = 230400;
+			if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+				info->tty->alt_speed = 460800;
+			change_speed(info, NULL);
+		}
+	} else
+		retval = startup(info);
+	tty_unlock();
+	return retval;
+}
+
+
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * 	    is emptied.  On bus types like RS485, the transmitter must
+ * 	    release the bus after transmitting. This must be done when
+ * 	    the transmit shift register is empty, not be done when the
+ * 	    transmit holding register is empty.  This functionality
+ * 	    allows an RS485 driver to be written in user space. 
+ */
+static int get_lsr_info(struct async_struct * info, unsigned int __user *value)
+{
+	unsigned char status;
+	unsigned int result;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	status = custom.serdatr;
+	mb();
+	local_irq_restore(flags);
+	result = ((status & SDR_TSRE) ? TIOCSER_TEMT : 0);
+	if (copy_to_user(value, &result, sizeof(int)))
+		return -EFAULT;
+	return 0;
+}
+
+
+static int rs_tiocmget(struct tty_struct *tty)
+{
+	struct async_struct * info = tty->driver_data;
+	unsigned char control, status;
+	unsigned long flags;
+
+	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
+		return -ENODEV;
+	if (tty->flags & (1 << TTY_IO_ERROR))
+		return -EIO;
+
+	control = info->MCR;
+	local_irq_save(flags);
+	status = ciab.pra;
+	local_irq_restore(flags);
+	return    ((control & SER_RTS) ? TIOCM_RTS : 0)
+		| ((control & SER_DTR) ? TIOCM_DTR : 0)
+		| (!(status  & SER_DCD) ? TIOCM_CAR : 0)
+		| (!(status  & SER_DSR) ? TIOCM_DSR : 0)
+		| (!(status  & SER_CTS) ? TIOCM_CTS : 0);
+}
+
+static int rs_tiocmset(struct tty_struct *tty, unsigned int set,
+						unsigned int clear)
+{
+	struct async_struct * info = tty->driver_data;
+	unsigned long flags;
+
+	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
+		return -ENODEV;
+	if (tty->flags & (1 << TTY_IO_ERROR))
+		return -EIO;
+
+	local_irq_save(flags);
+	if (set & TIOCM_RTS)
+		info->MCR |= SER_RTS;
+	if (set & TIOCM_DTR)
+		info->MCR |= SER_DTR;
+	if (clear & TIOCM_RTS)
+		info->MCR &= ~SER_RTS;
+	if (clear & TIOCM_DTR)
+		info->MCR &= ~SER_DTR;
+	rtsdtr_ctrl(info->MCR);
+	local_irq_restore(flags);
+	return 0;
+}
+
+/*
+ * rs_break() --- routine which turns the break handling on or off
+ */
+static int rs_break(struct tty_struct *tty, int break_state)
+{
+	struct async_struct * info = tty->driver_data;
+	unsigned long flags;
+
+	if (serial_paranoia_check(info, tty->name, "rs_break"))
+		return -EINVAL;
+
+	local_irq_save(flags);
+	if (break_state == -1)
+	  custom.adkcon = AC_SETCLR | AC_UARTBRK;
+	else
+	  custom.adkcon = AC_UARTBRK;
+	mb();
+	local_irq_restore(flags);
+	return 0;
+}
+
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int rs_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct async_struct *info = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cnow = info->state->icount;
+	local_irq_restore(flags);
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
+static int rs_ioctl(struct tty_struct *tty,
+		    unsigned int cmd, unsigned long arg)
+{
+	struct async_struct * info = tty->driver_data;
+	struct async_icount cprev, cnow;	/* kernel counter temps */
+	void __user *argp = (void __user *)arg;
+	unsigned long flags;
+
+	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
+		return -ENODEV;
+
+	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
+	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+		if (tty->flags & (1 << TTY_IO_ERROR))
+		    return -EIO;
+	}
+
+	switch (cmd) {
+		case TIOCGSERIAL:
+			return get_serial_info(info, argp);
+		case TIOCSSERIAL:
+			return set_serial_info(info, argp);
+		case TIOCSERCONFIG:
+			return 0;
+
+		case TIOCSERGETLSR: /* Get line status register */
+			return get_lsr_info(info, argp);
+
+		case TIOCSERGSTRUCT:
+			if (copy_to_user(argp,
+					 info, sizeof(struct async_struct)))
+				return -EFAULT;
+			return 0;
+
+		/*
+		 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+		 * - mask passed in arg for lines of interest
+ 		 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+		 * Caller should use TIOCGICOUNT to see which one it was
+		 */
+		case TIOCMIWAIT:
+			local_irq_save(flags);
+			/* note the counters on entry */
+			cprev = info->state->icount;
+			local_irq_restore(flags);
+			while (1) {
+				interruptible_sleep_on(&info->delta_msr_wait);
+				/* see if a signal did it */
+				if (signal_pending(current))
+					return -ERESTARTSYS;
+				local_irq_save(flags);
+				cnow = info->state->icount; /* atomic copy */
+				local_irq_restore(flags);
+				if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && 
+				    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+					return -EIO; /* no change => error */
+				if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+				     ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+				     ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
+				     ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
+					return 0;
+				}
+				cprev = cnow;
+			}
+			/* NOTREACHED */
+
+		case TIOCSERGWILD:
+		case TIOCSERSWILD:
+			/* "setserial -W" is called in Debian boot */
+			printk ("TIOCSER?WILD ioctl obsolete, ignored.\n");
+			return 0;
+
+		default:
+			return -ENOIOCTLCMD;
+		}
+	return 0;
+}
+
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+	struct async_struct *info = tty->driver_data;
+	unsigned long flags;
+	unsigned int cflag = tty->termios->c_cflag;
+
+	change_speed(info, old_termios);
+
+	/* Handle transition to B0 status */
+	if ((old_termios->c_cflag & CBAUD) &&
+	    !(cflag & CBAUD)) {
+		info->MCR &= ~(SER_DTR|SER_RTS);
+		local_irq_save(flags);
+		rtsdtr_ctrl(info->MCR);
+		local_irq_restore(flags);
+	}
+
+	/* Handle transition away from B0 status */
+	if (!(old_termios->c_cflag & CBAUD) &&
+	    (cflag & CBAUD)) {
+		info->MCR |= SER_DTR;
+		if (!(tty->termios->c_cflag & CRTSCTS) || 
+		    !test_bit(TTY_THROTTLED, &tty->flags)) {
+			info->MCR |= SER_RTS;
+		}
+		local_irq_save(flags);
+		rtsdtr_ctrl(info->MCR);
+		local_irq_restore(flags);
+	}
+
+	/* Handle turning off CRTSCTS */
+	if ((old_termios->c_cflag & CRTSCTS) &&
+	    !(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		rs_start(tty);
+	}
+
+#if 0
+	/*
+	 * No need to wake up processes in open wait, since they
+	 * sample the CLOCAL flag once, and don't recheck it.
+	 * XXX  It's not clear whether the current behavior is correct
+	 * or not.  Hence, this may change.....
+	 */
+	if (!(old_termios->c_cflag & CLOCAL) &&
+	    (tty->termios->c_cflag & CLOCAL))
+		wake_up_interruptible(&info->open_wait);
+#endif
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_close()
+ * 
+ * This routine is called when the serial port gets closed.  First, we
+ * wait for the last remaining data to be sent.  Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void rs_close(struct tty_struct *tty, struct file * filp)
+{
+	struct async_struct * info = tty->driver_data;
+	struct serial_state *state;
+	unsigned long flags;
+
+	if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
+		return;
+
+	state = info->state;
+
+	local_irq_save(flags);
+
+	if (tty_hung_up_p(filp)) {
+		DBG_CNT("before DEC-hung");
+		local_irq_restore(flags);
+		return;
+	}
+
+#ifdef SERIAL_DEBUG_OPEN
+	printk("rs_close ttys%d, count = %d\n", info->line, state->count);
+#endif
+	if ((tty->count == 1) && (state->count != 1)) {
+		/*
+		 * Uh, oh.  tty->count is 1, which means that the tty
+		 * structure will be freed.  state->count should always
+		 * be one in these conditions.  If it's greater than
+		 * one, we've got real problems, since it means the
+		 * serial port won't be shutdown.
+		 */
+		printk("rs_close: bad serial port count; tty->count is 1, "
+		       "state->count is %d\n", state->count);
+		state->count = 1;
+	}
+	if (--state->count < 0) {
+		printk("rs_close: bad serial port count for ttys%d: %d\n",
+		       info->line, state->count);
+		state->count = 0;
+	}
+	if (state->count) {
+		DBG_CNT("before DEC-2");
+		local_irq_restore(flags);
+		return;
+	}
+	info->flags |= ASYNC_CLOSING;
+	/*
+	 * Now we wait for the transmit buffer to clear; and we notify 
+	 * the line discipline to only process XON/XOFF characters.
+	 */
+	tty->closing = 1;
+	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, info->closing_wait);
+	/*
+	 * At this point we stop accepting input.  To do this, we
+	 * disable the receive line status interrupts, and tell the
+	 * interrupt driver to stop checking the data ready bit in the
+	 * line status register.
+	 */
+	info->read_status_mask &= ~UART_LSR_DR;
+	if (info->flags & ASYNC_INITIALIZED) {
+	        /* disable receive interrupts */
+	        custom.intena = IF_RBF;
+		mb();
+		/* clear any pending receive interrupt */
+		custom.intreq = IF_RBF;
+		mb();
+
+		/*
+		 * Before we drop DTR, make sure the UART transmitter
+		 * has completely drained; this is especially
+		 * important if there is a transmit FIFO!
+		 */
+		rs_wait_until_sent(tty, info->timeout);
+	}
+	shutdown(info);
+	rs_flush_buffer(tty);
+		
+	tty_ldisc_flush(tty);
+	tty->closing = 0;
+	info->event = 0;
+	info->tty = NULL;
+	if (info->blocked_open) {
+		if (info->close_delay) {
+			msleep_interruptible(jiffies_to_msecs(info->close_delay));
+		}
+		wake_up_interruptible(&info->open_wait);
+	}
+	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+	wake_up_interruptible(&info->close_wait);
+	local_irq_restore(flags);
+}
+
+/*
+ * rs_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct async_struct * info = tty->driver_data;
+	unsigned long orig_jiffies, char_time;
+	int tty_was_locked = tty_locked();
+	int lsr;
+
+	if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
+		return;
+
+	if (info->xmit_fifo_size == 0)
+		return; /* Just in case.... */
+
+	orig_jiffies = jiffies;
+
+	/*
+	 * tty_wait_until_sent is called from lots of places,
+	 * with or without the BTM.
+	 */
+	if (!tty_was_locked)
+		tty_lock();
+	/*
+	 * Set the check interval to be 1/5 of the estimated time to
+	 * send a single character, and make it at least 1.  The check
+	 * interval should also be less than the timeout.
+	 * 
+	 * Note: we have to use pretty tight timings here to satisfy
+	 * the NIST-PCTS.
+	 */
+	char_time = (info->timeout - HZ/50) / info->xmit_fifo_size;
+	char_time = char_time / 5;
+	if (char_time == 0)
+		char_time = 1;
+	if (timeout)
+	  char_time = min_t(unsigned long, char_time, timeout);
+	/*
+	 * If the transmitter hasn't cleared in twice the approximate
+	 * amount of time to send the entire FIFO, it probably won't
+	 * ever clear.  This assumes the UART isn't doing flow
+	 * control, which is currently the case.  Hence, if it ever
+	 * takes longer than info->timeout, this is probably due to a
+	 * UART bug of some kind.  So, we clamp the timeout parameter at
+	 * 2*info->timeout.
+	 */
+	if (!timeout || timeout > 2*info->timeout)
+		timeout = 2*info->timeout;
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+	printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
+	printk("jiff=%lu...", jiffies);
+#endif
+	while(!((lsr = custom.serdatr) & SDR_TSRE)) {
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+		printk("serdatr = %d (jiff=%lu)...", lsr, jiffies);
+#endif
+		msleep_interruptible(jiffies_to_msecs(char_time));
+		if (signal_pending(current))
+			break;
+		if (timeout && time_after(jiffies, orig_jiffies + timeout))
+			break;
+	}
+	__set_current_state(TASK_RUNNING);
+	if (!tty_was_locked)
+		tty_unlock();
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+	printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
+#endif
+}
+
+/*
+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+static void rs_hangup(struct tty_struct *tty)
+{
+	struct async_struct * info = tty->driver_data;
+	struct serial_state *state = info->state;
+
+	if (serial_paranoia_check(info, tty->name, "rs_hangup"))
+		return;
+
+	state = info->state;
+
+	rs_flush_buffer(tty);
+	shutdown(info);
+	info->event = 0;
+	state->count = 0;
+	info->flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->tty = NULL;
+	wake_up_interruptible(&info->open_wait);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_open() and friends
+ * ------------------------------------------------------------
+ */
+static int block_til_ready(struct tty_struct *tty, struct file * filp,
+			   struct async_struct *info)
+{
+#ifdef DECLARE_WAITQUEUE
+	DECLARE_WAITQUEUE(wait, current);
+#else
+	struct wait_queue wait = { current, NULL };
+#endif
+	struct serial_state *state = info->state;
+	int		retval;
+	int		do_clocal = 0, extra_count = 0;
+	unsigned long	flags;
+
+	/*
+	 * If the device is in the middle of being closed, then block
+	 * until it's done, and then try again.
+	 */
+	if (tty_hung_up_p(filp) ||
+	    (info->flags & ASYNC_CLOSING)) {
+		if (info->flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+		return ((info->flags & ASYNC_HUP_NOTIFY) ?
+			-EAGAIN : -ERESTARTSYS);
+#else
+		return -EAGAIN;
+#endif
+	}
+
+	/*
+	 * If non-blocking mode is set, or the port is not enabled,
+	 * then make the check up front and then exit.
+	 */
+	if ((filp->f_flags & O_NONBLOCK) ||
+	    (tty->flags & (1 << TTY_IO_ERROR))) {
+		info->flags |= ASYNC_NORMAL_ACTIVE;
+		return 0;
+	}
+
+	if (tty->termios->c_cflag & CLOCAL)
+		do_clocal = 1;
+
+	/*
+	 * Block waiting for the carrier detect and the line to become
+	 * free (i.e., not in use by the callout).  While we are in
+	 * this loop, state->count is dropped by one, so that
+	 * rs_close() knows when to free things.  We restore it upon
+	 * exit, either normal or abnormal.
+	 */
+	retval = 0;
+	add_wait_queue(&info->open_wait, &wait);
+#ifdef SERIAL_DEBUG_OPEN
+	printk("block_til_ready before block: ttys%d, count = %d\n",
+	       state->line, state->count);
+#endif
+	local_irq_save(flags);
+	if (!tty_hung_up_p(filp)) {
+		extra_count = 1;
+		state->count--;
+	}
+	local_irq_restore(flags);
+	info->blocked_open++;
+	while (1) {
+		local_irq_save(flags);
+		if (tty->termios->c_cflag & CBAUD)
+		        rtsdtr_ctrl(SER_DTR|SER_RTS);
+		local_irq_restore(flags);
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (tty_hung_up_p(filp) ||
+		    !(info->flags & ASYNC_INITIALIZED)) {
+#ifdef SERIAL_DO_RESTART
+			if (info->flags & ASYNC_HUP_NOTIFY)
+				retval = -EAGAIN;
+			else
+				retval = -ERESTARTSYS;
+#else
+			retval = -EAGAIN;
+#endif
+			break;
+		}
+		if (!(info->flags & ASYNC_CLOSING) &&
+		    (do_clocal || (!(ciab.pra & SER_DCD)) ))
+			break;
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			break;
+		}
+#ifdef SERIAL_DEBUG_OPEN
+		printk("block_til_ready blocking: ttys%d, count = %d\n",
+		       info->line, state->count);
+#endif
+		tty_unlock();
+		schedule();
+		tty_lock();
+	}
+	__set_current_state(TASK_RUNNING);
+	remove_wait_queue(&info->open_wait, &wait);
+	if (extra_count)
+		state->count++;
+	info->blocked_open--;
+#ifdef SERIAL_DEBUG_OPEN
+	printk("block_til_ready after blocking: ttys%d, count = %d\n",
+	       info->line, state->count);
+#endif
+	if (retval)
+		return retval;
+	info->flags |= ASYNC_NORMAL_ACTIVE;
+	return 0;
+}
+
+static int get_async_struct(int line, struct async_struct **ret_info)
+{
+	struct async_struct *info;
+	struct serial_state *sstate;
+
+	sstate = rs_table + line;
+	sstate->count++;
+	if (sstate->info) {
+		*ret_info = sstate->info;
+		return 0;
+	}
+	info = kzalloc(sizeof(struct async_struct), GFP_KERNEL);
+	if (!info) {
+		sstate->count--;
+		return -ENOMEM;
+	}
+#ifdef DECLARE_WAITQUEUE
+	init_waitqueue_head(&info->open_wait);
+	init_waitqueue_head(&info->close_wait);
+	init_waitqueue_head(&info->delta_msr_wait);
+#endif
+	info->magic = SERIAL_MAGIC;
+	info->port = sstate->port;
+	info->flags = sstate->flags;
+	info->xmit_fifo_size = sstate->xmit_fifo_size;
+	info->line = line;
+	tasklet_init(&info->tlet, do_softint, (unsigned long)info);
+	info->state = sstate;
+	if (sstate->info) {
+		kfree(info);
+		*ret_info = sstate->info;
+		return 0;
+	}
+	*ret_info = sstate->info = info;
+	return 0;
+}
+
+/*
+ * This routine is called whenever a serial port is opened.  It
+ * enables interrupts for a serial port, linking in its async structure into
+ * the IRQ chain.   It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+static int rs_open(struct tty_struct *tty, struct file * filp)
+{
+	struct async_struct	*info;
+	int 			retval, line;
+
+	line = tty->index;
+	if ((line < 0) || (line >= NR_PORTS)) {
+		return -ENODEV;
+	}
+	retval = get_async_struct(line, &info);
+	if (retval) {
+		return retval;
+	}
+	tty->driver_data = info;
+	info->tty = tty;
+	if (serial_paranoia_check(info, tty->name, "rs_open"))
+		return -ENODEV;
+
+#ifdef SERIAL_DEBUG_OPEN
+	printk("rs_open %s, count = %d\n", tty->name, info->state->count);
+#endif
+	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+	/*
+	 * If the port is the middle of closing, bail out now
+	 */
+	if (tty_hung_up_p(filp) ||
+	    (info->flags & ASYNC_CLOSING)) {
+		if (info->flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+		return ((info->flags & ASYNC_HUP_NOTIFY) ?
+			-EAGAIN : -ERESTARTSYS);
+#else
+		return -EAGAIN;
+#endif
+	}
+
+	/*
+	 * Start up serial port
+	 */
+	retval = startup(info);
+	if (retval) {
+		return retval;
+	}
+
+	retval = block_til_ready(tty, filp, info);
+	if (retval) {
+#ifdef SERIAL_DEBUG_OPEN
+		printk("rs_open returning after block_til_ready with %d\n",
+		       retval);
+#endif
+		return retval;
+	}
+
+#ifdef SERIAL_DEBUG_OPEN
+	printk("rs_open %s successful...", tty->name);
+#endif
+	return 0;
+}
+
+/*
+ * /proc fs routines....
+ */
+
+static inline void line_info(struct seq_file *m, struct serial_state *state)
+{
+	struct async_struct *info = state->info, scr_info;
+	char	stat_buf[30], control, status;
+	unsigned long flags;
+
+	seq_printf(m, "%d: uart:amiga_builtin",state->line);
+
+	/*
+	 * Figure out the current RS-232 lines
+	 */
+	if (!info) {
+		info = &scr_info;	/* This is just for serial_{in,out} */
+
+		info->magic = SERIAL_MAGIC;
+		info->flags = state->flags;
+		info->quot = 0;
+		info->tty = NULL;
+	}
+	local_irq_save(flags);
+	status = ciab.pra;
+	control = info ? info->MCR : status;
+	local_irq_restore(flags);
+
+	stat_buf[0] = 0;
+	stat_buf[1] = 0;
+	if(!(control & SER_RTS))
+		strcat(stat_buf, "|RTS");
+	if(!(status & SER_CTS))
+		strcat(stat_buf, "|CTS");
+	if(!(control & SER_DTR))
+		strcat(stat_buf, "|DTR");
+	if(!(status & SER_DSR))
+		strcat(stat_buf, "|DSR");
+	if(!(status & SER_DCD))
+		strcat(stat_buf, "|CD");
+
+	if (info->quot) {
+		seq_printf(m, " baud:%d", state->baud_base / info->quot);
+	}
+
+	seq_printf(m, " tx:%d rx:%d", state->icount.tx, state->icount.rx);
+
+	if (state->icount.frame)
+		seq_printf(m, " fe:%d", state->icount.frame);
+
+	if (state->icount.parity)
+		seq_printf(m, " pe:%d", state->icount.parity);
+
+	if (state->icount.brk)
+		seq_printf(m, " brk:%d", state->icount.brk);
+
+	if (state->icount.overrun)
+		seq_printf(m, " oe:%d", state->icount.overrun);
+
+	/*
+	 * Last thing is the RS-232 status lines
+	 */
+	seq_printf(m, " %s\n", stat_buf+1);
+}
+
+static int rs_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+	line_info(m, &rs_table[0]);
+	return 0;
+}
+
+static int rs_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, rs_proc_show, NULL);
+}
+
+static const struct file_operations rs_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= rs_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/*
+ * ---------------------------------------------------------------------
+ * rs_init() and friends
+ *
+ * rs_init() is called at boot-time to initialize the serial driver.
+ * ---------------------------------------------------------------------
+ */
+
+/*
+ * This routine prints out the appropriate serial driver version
+ * number, and identifies which options were configured into this
+ * driver.
+ */
+static void show_serial_version(void)
+{
+ 	printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
+}
+
+
+static const struct tty_operations serial_ops = {
+	.open = rs_open,
+	.close = rs_close,
+	.write = rs_write,
+	.put_char = rs_put_char,
+	.flush_chars = rs_flush_chars,
+	.write_room = rs_write_room,
+	.chars_in_buffer = rs_chars_in_buffer,
+	.flush_buffer = rs_flush_buffer,
+	.ioctl = rs_ioctl,
+	.throttle = rs_throttle,
+	.unthrottle = rs_unthrottle,
+	.set_termios = rs_set_termios,
+	.stop = rs_stop,
+	.start = rs_start,
+	.hangup = rs_hangup,
+	.break_ctl = rs_break,
+	.send_xchar = rs_send_xchar,
+	.wait_until_sent = rs_wait_until_sent,
+	.tiocmget = rs_tiocmget,
+	.tiocmset = rs_tiocmset,
+	.get_icount = rs_get_icount,
+	.proc_fops = &rs_proc_fops,
+};
+
+/*
+ * The serial driver boot-time initialization code!
+ */
+static int __init amiga_serial_probe(struct platform_device *pdev)
+{
+	unsigned long flags;
+	struct serial_state * state;
+	int error;
+
+	serial_driver = alloc_tty_driver(1);
+	if (!serial_driver)
+		return -ENOMEM;
+
+	IRQ_ports = NULL;
+
+	show_serial_version();
+
+	/* Initialize the tty_driver structure */
+
+	serial_driver->owner = THIS_MODULE;
+	serial_driver->driver_name = "amiserial";
+	serial_driver->name = "ttyS";
+	serial_driver->major = TTY_MAJOR;
+	serial_driver->minor_start = 64;
+	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	serial_driver->subtype = SERIAL_TYPE_NORMAL;
+	serial_driver->init_termios = tty_std_termios;
+	serial_driver->init_termios.c_cflag =
+		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	serial_driver->flags = TTY_DRIVER_REAL_RAW;
+	tty_set_operations(serial_driver, &serial_ops);
+
+	error = tty_register_driver(serial_driver);
+	if (error)
+		goto fail_put_tty_driver;
+
+	state = rs_table;
+	state->magic = SSTATE_MAGIC;
+	state->port = (int)&custom.serdatr; /* Just to give it a value */
+	state->line = 0;
+	state->custom_divisor = 0;
+	state->close_delay = 5*HZ/10;
+	state->closing_wait = 30*HZ;
+	state->icount.cts = state->icount.dsr = 
+	  state->icount.rng = state->icount.dcd = 0;
+	state->icount.rx = state->icount.tx = 0;
+	state->icount.frame = state->icount.parity = 0;
+	state->icount.overrun = state->icount.brk = 0;
+
+	printk(KERN_INFO "ttyS%d is the amiga builtin serial port\n",
+		       state->line);
+
+	/* Hardware set up */
+
+	state->baud_base = amiga_colorclock;
+	state->xmit_fifo_size = 1;
+
+	/* set ISRs, and then disable the rx interrupts */
+	error = request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
+	if (error)
+		goto fail_unregister;
+
+	error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED,
+			    "serial RX", state);
+	if (error)
+		goto fail_free_irq;
+
+	local_irq_save(flags);
+
+	/* turn off Rx and Tx interrupts */
+	custom.intena = IF_RBF | IF_TBE;
+	mb();
+
+	/* clear any pending interrupt */
+	custom.intreq = IF_RBF | IF_TBE;
+	mb();
+
+	local_irq_restore(flags);
+
+	/*
+	 * set the appropriate directions for the modem control flags,
+	 * and clear RTS and DTR
+	 */
+	ciab.ddra |= (SER_DTR | SER_RTS);   /* outputs */
+	ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR);  /* inputs */
+
+	platform_set_drvdata(pdev, state);
+
+	return 0;
+
+fail_free_irq:
+	free_irq(IRQ_AMIGA_TBE, state);
+fail_unregister:
+	tty_unregister_driver(serial_driver);
+fail_put_tty_driver:
+	put_tty_driver(serial_driver);
+	return error;
+}
+
+static int __exit amiga_serial_remove(struct platform_device *pdev)
+{
+	int error;
+	struct serial_state *state = platform_get_drvdata(pdev);
+	struct async_struct *info = state->info;
+
+	/* printk("Unloading %s: version %s\n", serial_name, serial_version); */
+	tasklet_kill(&info->tlet);
+	if ((error = tty_unregister_driver(serial_driver)))
+		printk("SERIAL: failed to unregister serial driver (%d)\n",
+		       error);
+	put_tty_driver(serial_driver);
+
+	rs_table[0].info = NULL;
+	kfree(info);
+
+	free_irq(IRQ_AMIGA_TBE, rs_table);
+	free_irq(IRQ_AMIGA_RBF, rs_table);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return error;
+}
+
+static struct platform_driver amiga_serial_driver = {
+	.remove = __exit_p(amiga_serial_remove),
+	.driver   = {
+		.name	= "amiga-serial",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init amiga_serial_init(void)
+{
+	return platform_driver_probe(&amiga_serial_driver, amiga_serial_probe);
+}
+
+module_init(amiga_serial_init);
+
+static void __exit amiga_serial_exit(void)
+{
+	platform_driver_unregister(&amiga_serial_driver);
+}
+
+module_exit(amiga_serial_exit);
+
+
+#if defined(CONFIG_SERIAL_CONSOLE) && !defined(MODULE)
+
+/*
+ * ------------------------------------------------------------
+ * Serial console driver
+ * ------------------------------------------------------------
+ */
+
+static void amiga_serial_putc(char c)
+{
+	custom.serdat = (unsigned char)c | 0x100;
+	while (!(custom.serdatr & 0x2000))
+		barrier();
+}
+
+/*
+ *	Print a string to the serial port trying not to disturb
+ *	any possible real use of the port...
+ *
+ *	The console must be locked when we get here.
+ */
+static void serial_console_write(struct console *co, const char *s,
+				unsigned count)
+{
+	unsigned short intena = custom.intenar;
+
+	custom.intena = IF_TBE;
+
+	while (count--) {
+		if (*s == '\n')
+			amiga_serial_putc('\r');
+		amiga_serial_putc(*s++);
+	}
+
+	custom.intena = IF_SETCLR | (intena & IF_TBE);
+}
+
+static struct tty_driver *serial_console_device(struct console *c, int *index)
+{
+	*index = 0;
+	return serial_driver;
+}
+
+static struct console sercons = {
+	.name =		"ttyS",
+	.write =	serial_console_write,
+	.device =	serial_console_device,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+
+/*
+ *	Register console.
+ */
+static int __init amiserial_console_init(void)
+{
+	register_console(&sercons);
+	return 0;
+}
+console_initcall(amiserial_console_init);
+
+#endif /* CONFIG_SERIAL_CONSOLE && !MODULE */
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-serial");
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
new file mode 100644
index 000000000000..16402445f2b2
--- /dev/null
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -0,0 +1,366 @@
+/*
+ * TTY over Blackfin JTAG Communication
+ *
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#define DRV_NAME "bfin-jtag-comm"
+#define DEV_NAME "ttyBFJC"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/circ_buf.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <asm/atomic.h>
+
+#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
+/* See the Debug/Emulation chapter in the HRM */
+#define EMUDOF   0x00000001	/* EMUDAT_OUT full & valid */
+#define EMUDIF   0x00000002	/* EMUDAT_IN full & valid */
+#define EMUDOOVF 0x00000004	/* EMUDAT_OUT overflow */
+#define EMUDIOVF 0x00000008	/* EMUDAT_IN overflow */
+
+static inline uint32_t bfin_write_emudat(uint32_t emudat)
+{
+	__asm__ __volatile__("emudat = %0;" : : "d"(emudat));
+	return emudat;
+}
+
+static inline uint32_t bfin_read_emudat(void)
+{
+	uint32_t emudat;
+	__asm__ __volatile__("%0 = emudat;" : "=d"(emudat));
+	return emudat;
+}
+
+static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d)
+{
+	return bfin_write_emudat((a << 0) | (b << 8) | (c << 16) | (d << 24));
+}
+
+#define CIRC_SIZE 2048	/* see comment in tty_io.c:do_tty_write() */
+#define CIRC_MASK (CIRC_SIZE - 1)
+#define circ_empty(circ)     ((circ)->head == (circ)->tail)
+#define circ_free(circ)      CIRC_SPACE((circ)->head, (circ)->tail, CIRC_SIZE)
+#define circ_cnt(circ)       CIRC_CNT((circ)->head, (circ)->tail, CIRC_SIZE)
+#define circ_byte(circ, idx) ((circ)->buf[(idx) & CIRC_MASK])
+
+static struct tty_driver *bfin_jc_driver;
+static struct task_struct *bfin_jc_kthread;
+static struct tty_struct * volatile bfin_jc_tty;
+static unsigned long bfin_jc_count;
+static DEFINE_MUTEX(bfin_jc_tty_mutex);
+static volatile struct circ_buf bfin_jc_write_buf;
+
+static int
+bfin_jc_emudat_manager(void *arg)
+{
+	uint32_t inbound_len = 0, outbound_len = 0;
+
+	while (!kthread_should_stop()) {
+		/* no one left to give data to, so sleep */
+		if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) {
+			pr_debug("waiting for readers\n");
+			__set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule();
+			__set_current_state(TASK_RUNNING);
+		}
+
+		/* no data available, so just chill */
+		if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) {
+			pr_debug("waiting for data (in_len = %i) (circ: %i %i)\n",
+				inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head);
+			if (inbound_len)
+				schedule();
+			else
+				schedule_timeout_interruptible(HZ);
+			continue;
+		}
+
+		/* if incoming data is ready, eat it */
+		if (bfin_read_DBGSTAT() & EMUDIF) {
+			struct tty_struct *tty;
+			mutex_lock(&bfin_jc_tty_mutex);
+			tty = (struct tty_struct *)bfin_jc_tty;
+			if (tty != NULL) {
+				uint32_t emudat = bfin_read_emudat();
+				if (inbound_len == 0) {
+					pr_debug("incoming length: 0x%08x\n", emudat);
+					inbound_len = emudat;
+				} else {
+					size_t num_chars = (4 <= inbound_len ? 4 : inbound_len);
+					pr_debug("  incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars);
+					inbound_len -= num_chars;
+					tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars);
+					tty_flip_buffer_push(tty);
+				}
+			}
+			mutex_unlock(&bfin_jc_tty_mutex);
+		}
+
+		/* if outgoing data is ready, post it */
+		if (!(bfin_read_DBGSTAT() & EMUDOF) && !circ_empty(&bfin_jc_write_buf)) {
+			if (outbound_len == 0) {
+				outbound_len = circ_cnt(&bfin_jc_write_buf);
+				bfin_write_emudat(outbound_len);
+				pr_debug("outgoing length: 0x%08x\n", outbound_len);
+			} else {
+				struct tty_struct *tty;
+				int tail = bfin_jc_write_buf.tail;
+				size_t ate = (4 <= outbound_len ? 4 : outbound_len);
+				uint32_t emudat =
+				bfin_write_emudat_chars(
+					circ_byte(&bfin_jc_write_buf, tail + 0),
+					circ_byte(&bfin_jc_write_buf, tail + 1),
+					circ_byte(&bfin_jc_write_buf, tail + 2),
+					circ_byte(&bfin_jc_write_buf, tail + 3)
+				);
+				bfin_jc_write_buf.tail += ate;
+				outbound_len -= ate;
+				mutex_lock(&bfin_jc_tty_mutex);
+				tty = (struct tty_struct *)bfin_jc_tty;
+				if (tty)
+					tty_wakeup(tty);
+				mutex_unlock(&bfin_jc_tty_mutex);
+				pr_debug("  outgoing data: 0x%08x (pushing %zu)\n", emudat, ate);
+			}
+		}
+	}
+
+	__set_current_state(TASK_RUNNING);
+	return 0;
+}
+
+static int
+bfin_jc_open(struct tty_struct *tty, struct file *filp)
+{
+	mutex_lock(&bfin_jc_tty_mutex);
+	pr_debug("open %lu\n", bfin_jc_count);
+	++bfin_jc_count;
+	bfin_jc_tty = tty;
+	wake_up_process(bfin_jc_kthread);
+	mutex_unlock(&bfin_jc_tty_mutex);
+	return 0;
+}
+
+static void
+bfin_jc_close(struct tty_struct *tty, struct file *filp)
+{
+	mutex_lock(&bfin_jc_tty_mutex);
+	pr_debug("close %lu\n", bfin_jc_count);
+	if (--bfin_jc_count == 0)
+		bfin_jc_tty = NULL;
+	wake_up_process(bfin_jc_kthread);
+	mutex_unlock(&bfin_jc_tty_mutex);
+}
+
+/* XXX: we dont handle the put_char() case where we must handle count = 1 */
+static int
+bfin_jc_circ_write(const unsigned char *buf, int count)
+{
+	int i;
+	count = min(count, circ_free(&bfin_jc_write_buf));
+	pr_debug("going to write chunk of %i bytes\n", count);
+	for (i = 0; i < count; ++i)
+		circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i];
+	bfin_jc_write_buf.head += i;
+	return i;
+}
+
+#ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE
+# define console_lock()
+# define console_unlock()
+#endif
+static int
+bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+	int i;
+	console_lock();
+	i = bfin_jc_circ_write(buf, count);
+	console_unlock();
+	wake_up_process(bfin_jc_kthread);
+	return i;
+}
+
+static void
+bfin_jc_flush_chars(struct tty_struct *tty)
+{
+	wake_up_process(bfin_jc_kthread);
+}
+
+static int
+bfin_jc_write_room(struct tty_struct *tty)
+{
+	return circ_free(&bfin_jc_write_buf);
+}
+
+static int
+bfin_jc_chars_in_buffer(struct tty_struct *tty)
+{
+	return circ_cnt(&bfin_jc_write_buf);
+}
+
+static void
+bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	unsigned long expire = jiffies + timeout;
+	while (!circ_empty(&bfin_jc_write_buf)) {
+		if (signal_pending(current))
+			break;
+		if (time_after(jiffies, expire))
+			break;
+	}
+}
+
+static const struct tty_operations bfin_jc_ops = {
+	.open            = bfin_jc_open,
+	.close           = bfin_jc_close,
+	.write           = bfin_jc_write,
+	/*.put_char        = bfin_jc_put_char,*/
+	.flush_chars     = bfin_jc_flush_chars,
+	.write_room      = bfin_jc_write_room,
+	.chars_in_buffer = bfin_jc_chars_in_buffer,
+	.wait_until_sent = bfin_jc_wait_until_sent,
+};
+
+static int __init bfin_jc_init(void)
+{
+	int ret;
+
+	bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME);
+	if (IS_ERR(bfin_jc_kthread))
+		return PTR_ERR(bfin_jc_kthread);
+
+	ret = -ENOMEM;
+
+	bfin_jc_write_buf.head = bfin_jc_write_buf.tail = 0;
+	bfin_jc_write_buf.buf = kmalloc(CIRC_SIZE, GFP_KERNEL);
+	if (!bfin_jc_write_buf.buf)
+		goto err;
+
+	bfin_jc_driver = alloc_tty_driver(1);
+	if (!bfin_jc_driver)
+		goto err;
+
+	bfin_jc_driver->owner        = THIS_MODULE;
+	bfin_jc_driver->driver_name  = DRV_NAME;
+	bfin_jc_driver->name         = DEV_NAME;
+	bfin_jc_driver->type         = TTY_DRIVER_TYPE_SERIAL;
+	bfin_jc_driver->subtype      = SERIAL_TYPE_NORMAL;
+	bfin_jc_driver->init_termios = tty_std_termios;
+	tty_set_operations(bfin_jc_driver, &bfin_jc_ops);
+
+	ret = tty_register_driver(bfin_jc_driver);
+	if (ret)
+		goto err;
+
+	pr_init(KERN_INFO DRV_NAME ": initialized\n");
+
+	return 0;
+
+ err:
+	put_tty_driver(bfin_jc_driver);
+	kfree(bfin_jc_write_buf.buf);
+	kthread_stop(bfin_jc_kthread);
+	return ret;
+}
+module_init(bfin_jc_init);
+
+static void __exit bfin_jc_exit(void)
+{
+	kthread_stop(bfin_jc_kthread);
+	kfree(bfin_jc_write_buf.buf);
+	tty_unregister_driver(bfin_jc_driver);
+	put_tty_driver(bfin_jc_driver);
+}
+module_exit(bfin_jc_exit);
+
+#if defined(CONFIG_BFIN_JTAG_COMM_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+static void
+bfin_jc_straight_buffer_write(const char *buf, unsigned count)
+{
+	unsigned ate = 0;
+	while (bfin_read_DBGSTAT() & EMUDOF)
+		continue;
+	bfin_write_emudat(count);
+	while (ate < count) {
+		while (bfin_read_DBGSTAT() & EMUDOF)
+			continue;
+		bfin_write_emudat_chars(buf[ate], buf[ate+1], buf[ate+2], buf[ate+3]);
+		ate += 4;
+	}
+}
+#endif
+
+#ifdef CONFIG_BFIN_JTAG_COMM_CONSOLE
+static void
+bfin_jc_console_write(struct console *co, const char *buf, unsigned count)
+{
+	if (bfin_jc_kthread == NULL)
+		bfin_jc_straight_buffer_write(buf, count);
+	else
+		bfin_jc_circ_write(buf, count);
+}
+
+static struct tty_driver *
+bfin_jc_console_device(struct console *co, int *index)
+{
+	*index = co->index;
+	return bfin_jc_driver;
+}
+
+static struct console bfin_jc_console = {
+	.name    = DEV_NAME,
+	.write   = bfin_jc_console_write,
+	.device  = bfin_jc_console_device,
+	.flags   = CON_ANYTIME | CON_PRINTBUFFER,
+	.index   = -1,
+};
+
+static int __init bfin_jc_console_init(void)
+{
+	register_console(&bfin_jc_console);
+	return 0;
+}
+console_initcall(bfin_jc_console_init);
+#endif
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init
+bfin_jc_early_write(struct console *co, const char *buf, unsigned int count)
+{
+	bfin_jc_straight_buffer_write(buf, count);
+}
+
+static struct __initdata console bfin_jc_early_console = {
+	.name   = "early_BFJC",
+	.write   = bfin_jc_early_write,
+	.flags   = CON_ANYTIME | CON_PRINTBUFFER,
+	.index   = -1,
+};
+
+struct console * __init
+bfin_jc_early_init(unsigned int port, unsigned int cflag)
+{
+	return &bfin_jc_early_console;
+}
+#endif
+
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_DESCRIPTION("TTY over Blackfin JTAG Communication");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
new file mode 100644
index 000000000000..c99728f0cd9f
--- /dev/null
+++ b/drivers/tty/cyclades.c
@@ -0,0 +1,4200 @@
+#undef	BLOCKMOVE
+#define	Z_WAKE
+#undef	Z_EXT_CHARS_IN_BUFFER
+
+/*
+ *  linux/drivers/char/cyclades.c
+ *
+ * This file contains the driver for the Cyclades async multiport
+ * serial boards.
+ *
+ * Initially written by Randolph Bentson <bentson@grieg.seaslug.org>.
+ * Modified and maintained by Marcio Saito <marcio@cyclades.com>.
+ *
+ * Copyright (C) 2007-2009 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Much of the design and some of the code came from serial.c
+ * which was copyright (C) 1991, 1992  Linus Torvalds.  It was
+ * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92,
+ * and then fixed as suggested by Michael K. Johnson 12/12/92.
+ * Converted to pci probing and cleaned up by Jiri Slaby.
+ *
+ */
+
+#define CY_VERSION	"2.6"
+
+/* If you need to install more boards than NR_CARDS, change the constant
+   in the definition below. No other change is necessary to support up to
+   eight boards. Beyond that you'll have to extend cy_isa_addresses. */
+
+#define NR_CARDS	4
+
+/*
+   If the total number of ports is larger than NR_PORTS, change this
+   constant in the definition below. No other change is necessary to
+   support more boards/ports. */
+
+#define NR_PORTS	256
+
+#define ZO_V1	0
+#define ZO_V2	1
+#define ZE_V1	2
+
+#define	SERIAL_PARANOIA_CHECK
+#undef	CY_DEBUG_OPEN
+#undef	CY_DEBUG_THROTTLE
+#undef	CY_DEBUG_OTHER
+#undef	CY_DEBUG_IO
+#undef	CY_DEBUG_COUNT
+#undef	CY_DEBUG_DTR
+#undef	CY_DEBUG_WAIT_UNTIL_SENT
+#undef	CY_DEBUG_INTERRUPTS
+#undef	CY_16Y_HACK
+#undef	CY_ENABLE_MONITORING
+#undef	CY_PCI_DEBUG
+
+/*
+ * Include section
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/cyclades.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <linux/firmware.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+#include <linux/stat.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+static void cy_send_xchar(struct tty_struct *tty, char ch);
+
+#ifndef SERIAL_XMIT_SIZE
+#define	SERIAL_XMIT_SIZE	(min(PAGE_SIZE, 4096))
+#endif
+
+#define STD_COM_FLAGS (0)
+
+/* firmware stuff */
+#define ZL_MAX_BLOCKS	16
+#define DRIVER_VERSION	0x02010203
+#define RAM_SIZE 0x80000
+
+enum zblock_type {
+	ZBLOCK_PRG = 0,
+	ZBLOCK_FPGA = 1
+};
+
+struct zfile_header {
+	char name[64];
+	char date[32];
+	char aux[32];
+	u32 n_config;
+	u32 config_offset;
+	u32 n_blocks;
+	u32 block_offset;
+	u32 reserved[9];
+} __attribute__ ((packed));
+
+struct zfile_config {
+	char name[64];
+	u32 mailbox;
+	u32 function;
+	u32 n_blocks;
+	u32 block_list[ZL_MAX_BLOCKS];
+} __attribute__ ((packed));
+
+struct zfile_block {
+	u32 type;
+	u32 file_offset;
+	u32 ram_offset;
+	u32 size;
+} __attribute__ ((packed));
+
+static struct tty_driver *cy_serial_driver;
+
+#ifdef CONFIG_ISA
+/* This is the address lookup table. The driver will probe for
+   Cyclom-Y/ISA boards at all addresses in here. If you want the
+   driver to probe addresses at a different address, add it to
+   this table.  If the driver is probing some other board and
+   causing problems, remove the offending address from this table.
+*/
+
+static unsigned int cy_isa_addresses[] = {
+	0xD0000,
+	0xD2000,
+	0xD4000,
+	0xD6000,
+	0xD8000,
+	0xDA000,
+	0xDC000,
+	0xDE000,
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+#define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses)
+
+static long maddr[NR_CARDS];
+static int irq[NR_CARDS];
+
+module_param_array(maddr, long, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+
+#endif				/* CONFIG_ISA */
+
+/* This is the per-card data structure containing address, irq, number of
+   channels, etc. This driver supports a maximum of NR_CARDS cards.
+*/
+static struct cyclades_card cy_card[NR_CARDS];
+
+static int cy_next_channel;	/* next minor available */
+
+/*
+ * This is used to look up the divisor speeds and the timeouts
+ * We're normally limited to 15 distinct baud rates.  The extra
+ * are accessed via settings in info->port.flags.
+ *      0,     1,     2,     3,     4,     5,     6,     7,     8,     9,
+ *     10,    11,    12,    13,    14,    15,    16,    17,    18,    19,
+ *                                               HI            VHI
+ *     20
+ */
+static const int baud_table[] = {
+	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
+	1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
+	230400, 0
+};
+
+static const char baud_co_25[] = {	/* 25 MHz clock option table */
+	/* value =>    00    01   02    03    04 */
+	/* divide by    8    32   128   512  2048 */
+	0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
+	0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static const char baud_bpr_25[] = {	/* 25 MHz baud rate period table */
+	0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
+	0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
+};
+
+static const char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
+	/* value =>    00    01   02    03    04 */
+	/* divide by    8    32   128   512  2048 */
+	0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
+	0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00
+};
+
+static const char baud_bpr_60[] = {	/* 60 MHz baud rate period table (CD1400 J) */
+	0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
+	0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
+	0x21
+};
+
+static const char baud_cor3[] = {	/* receive threshold */
+	0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+	0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
+	0x07
+};
+
+/*
+ * The Cyclades driver implements HW flow control as any serial driver.
+ * The cyclades_port structure member rflow and the vector rflow_thr
+ * allows us to take advantage of a special feature in the CD1400 to avoid
+ * data loss even when the system interrupt latency is too high. These flags
+ * are to be used only with very special applications. Setting these flags
+ * requires the use of a special cable (DTR and RTS reversed). In the new
+ * CD1400-based boards (rev. 6.00 or later), there is no need for special
+ * cables.
+ */
+
+static const char rflow_thr[] = {	/* rflow threshold */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+	0x0a
+};
+
+/*  The Cyclom-Ye has placed the sequential chips in non-sequential
+ *  address order.  This look-up table overcomes that problem.
+ */
+static const unsigned int cy_chip_offset[] = { 0x0000,
+	0x0400,
+	0x0800,
+	0x0C00,
+	0x0200,
+	0x0600,
+	0x0A00,
+	0x0E00
+};
+
+/* PCI related definitions */
+
+#ifdef CONFIG_PCI
+static const struct pci_device_id cy_pci_dev_id[] = {
+	/* PCI < 1Mb */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) },
+	/* PCI > 1Mb */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) },
+	/* 4Y PCI < 1Mb */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) },
+	/* 4Y PCI > 1Mb */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) },
+	/* 8Y PCI < 1Mb */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) },
+	/* 8Y PCI > 1Mb */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) },
+	/* Z PCI < 1Mb */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) },
+	/* Z PCI > 1Mb */
+	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) },
+	{ }			/* end of table */
+};
+MODULE_DEVICE_TABLE(pci, cy_pci_dev_id);
+#endif
+
+static void cy_start(struct tty_struct *);
+static void cy_set_line_char(struct cyclades_port *, struct tty_struct *);
+static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32);
+#ifdef CONFIG_ISA
+static unsigned detect_isa_irq(void __iomem *);
+#endif				/* CONFIG_ISA */
+
+#ifndef CONFIG_CYZ_INTR
+static void cyz_poll(unsigned long);
+
+/* The Cyclades-Z polling cycle is defined by this variable */
+static long cyz_polling_cycle = CZ_DEF_POLL;
+
+static DEFINE_TIMER(cyz_timerlist, cyz_poll, 0, 0);
+
+#else				/* CONFIG_CYZ_INTR */
+static void cyz_rx_restart(unsigned long);
+static struct timer_list cyz_rx_full_timer[NR_PORTS];
+#endif				/* CONFIG_CYZ_INTR */
+
+static inline void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val)
+{
+	struct cyclades_card *card = port->card;
+
+	cy_writeb(port->u.cyy.base_addr + (reg << card->bus_index), val);
+}
+
+static inline u8 cyy_readb(struct cyclades_port *port, u32 reg)
+{
+	struct cyclades_card *card = port->card;
+
+	return readb(port->u.cyy.base_addr + (reg << card->bus_index));
+}
+
+static inline bool cy_is_Z(struct cyclades_card *card)
+{
+	return card->num_chips == (unsigned int)-1;
+}
+
+static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr)
+{
+	return readl(&ctl_addr->init_ctrl) & (1 << 17);
+}
+
+static inline bool cyz_fpga_loaded(struct cyclades_card *card)
+{
+	return __cyz_fpga_loaded(card->ctl_addr.p9060);
+}
+
+static inline bool cyz_is_loaded(struct cyclades_card *card)
+{
+	struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS;
+
+	return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) &&
+			readl(&fw_id->signature) == ZFIRM_ID;
+}
+
+static inline int serial_paranoia_check(struct cyclades_port *info,
+		const char *name, const char *routine)
+{
+#ifdef SERIAL_PARANOIA_CHECK
+	if (!info) {
+		printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) "
+				"in %s\n", name, routine);
+		return 1;
+	}
+
+	if (info->magic != CYCLADES_MAGIC) {
+		printk(KERN_WARNING "cyc Warning: bad magic number for serial "
+				"struct (%s) in %s\n", name, routine);
+		return 1;
+	}
+#endif
+	return 0;
+}
+
+/***********************************************************/
+/********* Start of block of Cyclom-Y specific code ********/
+
+/* This routine waits up to 1000 micro-seconds for the previous
+   command to the Cirrus chip to complete and then issues the
+   new command.  An error is returned if the previous command
+   didn't finish within the time limit.
+
+   This function is only called from inside spinlock-protected code.
+ */
+static int __cyy_issue_cmd(void __iomem *base_addr, u8 cmd, int index)
+{
+	void __iomem *ccr = base_addr + (CyCCR << index);
+	unsigned int i;
+
+	/* Check to see that the previous command has completed */
+	for (i = 0; i < 100; i++) {
+		if (readb(ccr) == 0)
+			break;
+		udelay(10L);
+	}
+	/* if the CCR never cleared, the previous command
+	   didn't finish within the "reasonable time" */
+	if (i == 100)
+		return -1;
+
+	/* Issue the new command */
+	cy_writeb(ccr, cmd);
+
+	return 0;
+}
+
+static inline int cyy_issue_cmd(struct cyclades_port *port, u8 cmd)
+{
+	return __cyy_issue_cmd(port->u.cyy.base_addr, cmd,
+			port->card->bus_index);
+}
+
+#ifdef CONFIG_ISA
+/* ISA interrupt detection code */
+static unsigned detect_isa_irq(void __iomem *address)
+{
+	int irq;
+	unsigned long irqs, flags;
+	int save_xir, save_car;
+	int index = 0;		/* IRQ probing is only for ISA */
+
+	/* forget possible initially masked and pending IRQ */
+	irq = probe_irq_off(probe_irq_on());
+
+	/* Clear interrupts on the board first */
+	cy_writeb(address + (Cy_ClrIntr << index), 0);
+	/* Cy_ClrIntr is 0x1800 */
+
+	irqs = probe_irq_on();
+	/* Wait ... */
+	msleep(5);
+
+	/* Enable the Tx interrupts on the CD1400 */
+	local_irq_save(flags);
+	cy_writeb(address + (CyCAR << index), 0);
+	__cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
+
+	cy_writeb(address + (CyCAR << index), 0);
+	cy_writeb(address + (CySRER << index),
+		  readb(address + (CySRER << index)) | CyTxRdy);
+	local_irq_restore(flags);
+
+	/* Wait ... */
+	msleep(5);
+
+	/* Check which interrupt is in use */
+	irq = probe_irq_off(irqs);
+
+	/* Clean up */
+	save_xir = (u_char) readb(address + (CyTIR << index));
+	save_car = readb(address + (CyCAR << index));
+	cy_writeb(address + (CyCAR << index), (save_xir & 0x3));
+	cy_writeb(address + (CySRER << index),
+		  readb(address + (CySRER << index)) & ~CyTxRdy);
+	cy_writeb(address + (CyTIR << index), (save_xir & 0x3f));
+	cy_writeb(address + (CyCAR << index), (save_car));
+	cy_writeb(address + (Cy_ClrIntr << index), 0);
+	/* Cy_ClrIntr is 0x1800 */
+
+	return (irq > 0) ? irq : 0;
+}
+#endif				/* CONFIG_ISA */
+
+static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
+		void __iomem *base_addr)
+{
+	struct cyclades_port *info;
+	struct tty_struct *tty;
+	int len, index = cinfo->bus_index;
+	u8 ivr, save_xir, channel, save_car, data, char_count;
+
+#ifdef CY_DEBUG_INTERRUPTS
+	printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip);
+#endif
+	/* determine the channel & change to that context */
+	save_xir = readb(base_addr + (CyRIR << index));
+	channel = save_xir & CyIRChannel;
+	info = &cinfo->ports[channel + chip * 4];
+	save_car = cyy_readb(info, CyCAR);
+	cyy_writeb(info, CyCAR, save_xir);
+	ivr = cyy_readb(info, CyRIVR) & CyIVRMask;
+
+	tty = tty_port_tty_get(&info->port);
+	/* if there is nowhere to put the data, discard it */
+	if (tty == NULL) {
+		if (ivr == CyIVRRxEx) {	/* exception */
+			data = cyy_readb(info, CyRDSR);
+		} else {	/* normal character reception */
+			char_count = cyy_readb(info, CyRDCR);
+			while (char_count--)
+				data = cyy_readb(info, CyRDSR);
+		}
+		goto end;
+	}
+	/* there is an open port for this data */
+	if (ivr == CyIVRRxEx) {	/* exception */
+		data = cyy_readb(info, CyRDSR);
+
+		/* For statistics only */
+		if (data & CyBREAK)
+			info->icount.brk++;
+		else if (data & CyFRAME)
+			info->icount.frame++;
+		else if (data & CyPARITY)
+			info->icount.parity++;
+		else if (data & CyOVERRUN)
+			info->icount.overrun++;
+
+		if (data & info->ignore_status_mask) {
+			info->icount.rx++;
+			tty_kref_put(tty);
+			return;
+		}
+		if (tty_buffer_request_room(tty, 1)) {
+			if (data & info->read_status_mask) {
+				if (data & CyBREAK) {
+					tty_insert_flip_char(tty,
+						cyy_readb(info, CyRDSR),
+						TTY_BREAK);
+					info->icount.rx++;
+					if (info->port.flags & ASYNC_SAK)
+						do_SAK(tty);
+				} else if (data & CyFRAME) {
+					tty_insert_flip_char(tty,
+						cyy_readb(info, CyRDSR),
+						TTY_FRAME);
+					info->icount.rx++;
+					info->idle_stats.frame_errs++;
+				} else if (data & CyPARITY) {
+					/* Pieces of seven... */
+					tty_insert_flip_char(tty,
+						cyy_readb(info, CyRDSR),
+						TTY_PARITY);
+					info->icount.rx++;
+					info->idle_stats.parity_errs++;
+				} else if (data & CyOVERRUN) {
+					tty_insert_flip_char(tty, 0,
+							TTY_OVERRUN);
+					info->icount.rx++;
+					/* If the flip buffer itself is
+					   overflowing, we still lose
+					   the next incoming character.
+					 */
+					tty_insert_flip_char(tty,
+						cyy_readb(info, CyRDSR),
+						TTY_FRAME);
+					info->icount.rx++;
+					info->idle_stats.overruns++;
+				/* These two conditions may imply */
+				/* a normal read should be done. */
+				/* } else if(data & CyTIMEOUT) { */
+				/* } else if(data & CySPECHAR) { */
+				} else {
+					tty_insert_flip_char(tty, 0,
+							TTY_NORMAL);
+					info->icount.rx++;
+				}
+			} else {
+				tty_insert_flip_char(tty, 0, TTY_NORMAL);
+				info->icount.rx++;
+			}
+		} else {
+			/* there was a software buffer overrun and nothing
+			 * could be done about it!!! */
+			info->icount.buf_overrun++;
+			info->idle_stats.overruns++;
+		}
+	} else {	/* normal character reception */
+		/* load # chars available from the chip */
+		char_count = cyy_readb(info, CyRDCR);
+
+#ifdef CY_ENABLE_MONITORING
+		++info->mon.int_count;
+		info->mon.char_count += char_count;
+		if (char_count > info->mon.char_max)
+			info->mon.char_max = char_count;
+		info->mon.char_last = char_count;
+#endif
+		len = tty_buffer_request_room(tty, char_count);
+		while (len--) {
+			data = cyy_readb(info, CyRDSR);
+			tty_insert_flip_char(tty, data, TTY_NORMAL);
+			info->idle_stats.recv_bytes++;
+			info->icount.rx++;
+#ifdef CY_16Y_HACK
+			udelay(10L);
+#endif
+		}
+		info->idle_stats.recv_idle = jiffies;
+	}
+	tty_schedule_flip(tty);
+	tty_kref_put(tty);
+end:
+	/* end of service */
+	cyy_writeb(info, CyRIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
+}
+
+static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
+		void __iomem *base_addr)
+{
+	struct cyclades_port *info;
+	struct tty_struct *tty;
+	int char_count, index = cinfo->bus_index;
+	u8 save_xir, channel, save_car, outch;
+
+	/* Since we only get here when the transmit buffer
+	   is empty, we know we can always stuff a dozen
+	   characters. */
+#ifdef CY_DEBUG_INTERRUPTS
+	printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip);
+#endif
+
+	/* determine the channel & change to that context */
+	save_xir = readb(base_addr + (CyTIR << index));
+	channel = save_xir & CyIRChannel;
+	save_car = readb(base_addr + (CyCAR << index));
+	cy_writeb(base_addr + (CyCAR << index), save_xir);
+
+	info = &cinfo->ports[channel + chip * 4];
+	tty = tty_port_tty_get(&info->port);
+	if (tty == NULL) {
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
+		goto end;
+	}
+
+	/* load the on-chip space for outbound data */
+	char_count = info->xmit_fifo_size;
+
+	if (info->x_char) {	/* send special char */
+		outch = info->x_char;
+		cyy_writeb(info, CyTDR, outch);
+		char_count--;
+		info->icount.tx++;
+		info->x_char = 0;
+	}
+
+	if (info->breakon || info->breakoff) {
+		if (info->breakon) {
+			cyy_writeb(info, CyTDR, 0);
+			cyy_writeb(info, CyTDR, 0x81);
+			info->breakon = 0;
+			char_count -= 2;
+		}
+		if (info->breakoff) {
+			cyy_writeb(info, CyTDR, 0);
+			cyy_writeb(info, CyTDR, 0x83);
+			info->breakoff = 0;
+			char_count -= 2;
+		}
+	}
+
+	while (char_count-- > 0) {
+		if (!info->xmit_cnt) {
+			if (cyy_readb(info, CySRER) & CyTxMpty) {
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) & ~CyTxMpty);
+			} else {
+				cyy_writeb(info, CySRER, CyTxMpty |
+					(cyy_readb(info, CySRER) & ~CyTxRdy));
+			}
+			goto done;
+		}
+		if (info->port.xmit_buf == NULL) {
+			cyy_writeb(info, CySRER,
+				cyy_readb(info, CySRER) & ~CyTxRdy);
+			goto done;
+		}
+		if (tty->stopped || tty->hw_stopped) {
+			cyy_writeb(info, CySRER,
+				cyy_readb(info, CySRER) & ~CyTxRdy);
+			goto done;
+		}
+		/* Because the Embedded Transmit Commands have been enabled,
+		 * we must check to see if the escape character, NULL, is being
+		 * sent. If it is, we must ensure that there is room for it to
+		 * be doubled in the output stream.  Therefore we no longer
+		 * advance the pointer when the character is fetched, but
+		 * rather wait until after the check for a NULL output
+		 * character. This is necessary because there may not be room
+		 * for the two chars needed to send a NULL.)
+		 */
+		outch = info->port.xmit_buf[info->xmit_tail];
+		if (outch) {
+			info->xmit_cnt--;
+			info->xmit_tail = (info->xmit_tail + 1) &
+					(SERIAL_XMIT_SIZE - 1);
+			cyy_writeb(info, CyTDR, outch);
+			info->icount.tx++;
+		} else {
+			if (char_count > 1) {
+				info->xmit_cnt--;
+				info->xmit_tail = (info->xmit_tail + 1) &
+					(SERIAL_XMIT_SIZE - 1);
+				cyy_writeb(info, CyTDR, outch);
+				cyy_writeb(info, CyTDR, 0);
+				info->icount.tx++;
+				char_count--;
+			}
+		}
+	}
+
+done:
+	tty_wakeup(tty);
+	tty_kref_put(tty);
+end:
+	/* end of service */
+	cyy_writeb(info, CyTIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
+}
+
+static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
+		void __iomem *base_addr)
+{
+	struct cyclades_port *info;
+	struct tty_struct *tty;
+	int index = cinfo->bus_index;
+	u8 save_xir, channel, save_car, mdm_change, mdm_status;
+
+	/* determine the channel & change to that context */
+	save_xir = readb(base_addr + (CyMIR << index));
+	channel = save_xir & CyIRChannel;
+	info = &cinfo->ports[channel + chip * 4];
+	save_car = cyy_readb(info, CyCAR);
+	cyy_writeb(info, CyCAR, save_xir);
+
+	mdm_change = cyy_readb(info, CyMISR);
+	mdm_status = cyy_readb(info, CyMSVR1);
+
+	tty = tty_port_tty_get(&info->port);
+	if (!tty)
+		goto end;
+
+	if (mdm_change & CyANY_DELTA) {
+		/* For statistics only */
+		if (mdm_change & CyDCD)
+			info->icount.dcd++;
+		if (mdm_change & CyCTS)
+			info->icount.cts++;
+		if (mdm_change & CyDSR)
+			info->icount.dsr++;
+		if (mdm_change & CyRI)
+			info->icount.rng++;
+
+		wake_up_interruptible(&info->port.delta_msr_wait);
+	}
+
+	if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) {
+		if (mdm_status & CyDCD)
+			wake_up_interruptible(&info->port.open_wait);
+		else
+			tty_hangup(tty);
+	}
+	if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
+		if (tty->hw_stopped) {
+			if (mdm_status & CyCTS) {
+				/* cy_start isn't used
+				   because... !!! */
+				tty->hw_stopped = 0;
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) | CyTxRdy);
+				tty_wakeup(tty);
+			}
+		} else {
+			if (!(mdm_status & CyCTS)) {
+				/* cy_stop isn't used
+				   because ... !!! */
+				tty->hw_stopped = 1;
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) & ~CyTxRdy);
+			}
+		}
+	}
+/*	if (mdm_change & CyDSR) {
+	}
+	if (mdm_change & CyRI) {
+	}*/
+	tty_kref_put(tty);
+end:
+	/* end of service */
+	cyy_writeb(info, CyMIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
+}
+
+/* The real interrupt service routine is called
+   whenever the card wants its hand held--chars
+   received, out buffer empty, modem change, etc.
+ */
+static irqreturn_t cyy_interrupt(int irq, void *dev_id)
+{
+	int status;
+	struct cyclades_card *cinfo = dev_id;
+	void __iomem *base_addr, *card_base_addr;
+	unsigned int chip, too_many, had_work;
+	int index;
+
+	if (unlikely(cinfo == NULL)) {
+#ifdef CY_DEBUG_INTERRUPTS
+		printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n",
+				irq);
+#endif
+		return IRQ_NONE;	/* spurious interrupt */
+	}
+
+	card_base_addr = cinfo->base_addr;
+	index = cinfo->bus_index;
+
+	/* card was not initialized yet (e.g. DEBUG_SHIRQ) */
+	if (unlikely(card_base_addr == NULL))
+		return IRQ_HANDLED;
+
+	/* This loop checks all chips in the card.  Make a note whenever
+	   _any_ chip had some work to do, as this is considered an
+	   indication that there will be more to do.  Only when no chip
+	   has any work does this outermost loop exit.
+	 */
+	do {
+		had_work = 0;
+		for (chip = 0; chip < cinfo->num_chips; chip++) {
+			base_addr = cinfo->base_addr +
+					(cy_chip_offset[chip] << index);
+			too_many = 0;
+			while ((status = readb(base_addr +
+						(CySVRR << index))) != 0x00) {
+				had_work++;
+			/* The purpose of the following test is to ensure that
+			   no chip can monopolize the driver.  This forces the
+			   chips to be checked in a round-robin fashion (after
+			   draining each of a bunch (1000) of characters).
+			 */
+				if (1000 < too_many++)
+					break;
+				spin_lock(&cinfo->card_lock);
+				if (status & CySRReceive) /* rx intr */
+					cyy_chip_rx(cinfo, chip, base_addr);
+				if (status & CySRTransmit) /* tx intr */
+					cyy_chip_tx(cinfo, chip, base_addr);
+				if (status & CySRModem) /* modem intr */
+					cyy_chip_modem(cinfo, chip, base_addr);
+				spin_unlock(&cinfo->card_lock);
+			}
+		}
+	} while (had_work);
+
+	/* clear interrupts */
+	spin_lock(&cinfo->card_lock);
+	cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0);
+	/* Cy_ClrIntr is 0x1800 */
+	spin_unlock(&cinfo->card_lock);
+	return IRQ_HANDLED;
+}				/* cyy_interrupt */
+
+static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
+		unsigned int clear)
+{
+	struct cyclades_card *card = info->card;
+	int channel = info->line - card->first_line;
+	u32 rts, dtr, msvrr, msvrd;
+
+	channel &= 0x03;
+
+	if (info->rtsdtr_inv) {
+		msvrr = CyMSVR2;
+		msvrd = CyMSVR1;
+		rts = CyDTR;
+		dtr = CyRTS;
+	} else {
+		msvrr = CyMSVR1;
+		msvrd = CyMSVR2;
+		rts = CyRTS;
+		dtr = CyDTR;
+	}
+	if (set & TIOCM_RTS) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrr, rts);
+	}
+	if (clear & TIOCM_RTS) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrr, ~rts);
+	}
+	if (set & TIOCM_DTR) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrd, dtr);
+#ifdef CY_DEBUG_DTR
+		printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
+		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
+			cyy_readb(info, CyMSVR1),
+			cyy_readb(info, CyMSVR2));
+#endif
+	}
+	if (clear & TIOCM_DTR) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrd, ~dtr);
+#ifdef CY_DEBUG_DTR
+		printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
+		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
+			cyy_readb(info, CyMSVR1),
+			cyy_readb(info, CyMSVR2));
+#endif
+	}
+}
+
+/***********************************************************/
+/********* End of block of Cyclom-Y specific code **********/
+/******** Start of block of Cyclades-Z specific code *******/
+/***********************************************************/
+
+static int
+cyz_fetch_msg(struct cyclades_card *cinfo,
+		__u32 *channel, __u8 *cmd, __u32 *param)
+{
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
+	unsigned long loc_doorbell;
+
+	loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell);
+	if (loc_doorbell) {
+		*cmd = (char)(0xff & loc_doorbell);
+		*channel = readl(&board_ctrl->fwcmd_channel);
+		*param = (__u32) readl(&board_ctrl->fwcmd_param);
+		cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff);
+		return 1;
+	}
+	return 0;
+}				/* cyz_fetch_msg */
+
+static int
+cyz_issue_cmd(struct cyclades_card *cinfo,
+		__u32 channel, __u8 cmd, __u32 param)
+{
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
+	__u32 __iomem *pci_doorbell;
+	unsigned int index;
+
+	if (!cyz_is_loaded(cinfo))
+		return -1;
+
+	index = 0;
+	pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell;
+	while ((readl(pci_doorbell) & 0xff) != 0) {
+		if (index++ == 1000)
+			return (int)(readl(pci_doorbell) & 0xff);
+		udelay(50L);
+	}
+	cy_writel(&board_ctrl->hcmd_channel, channel);
+	cy_writel(&board_ctrl->hcmd_param, param);
+	cy_writel(pci_doorbell, (long)cmd);
+
+	return 0;
+}				/* cyz_issue_cmd */
+
+static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty)
+{
+	struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
+	struct cyclades_card *cinfo = info->card;
+	unsigned int char_count;
+	int len;
+#ifdef BLOCKMOVE
+	unsigned char *buf;
+#else
+	char data;
+#endif
+	__u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr;
+
+	rx_get = new_rx_get = readl(&buf_ctrl->rx_get);
+	rx_put = readl(&buf_ctrl->rx_put);
+	rx_bufsize = readl(&buf_ctrl->rx_bufsize);
+	rx_bufaddr = readl(&buf_ctrl->rx_bufaddr);
+	if (rx_put >= rx_get)
+		char_count = rx_put - rx_get;
+	else
+		char_count = rx_put - rx_get + rx_bufsize;
+
+	if (char_count) {
+#ifdef CY_ENABLE_MONITORING
+		info->mon.int_count++;
+		info->mon.char_count += char_count;
+		if (char_count > info->mon.char_max)
+			info->mon.char_max = char_count;
+		info->mon.char_last = char_count;
+#endif
+		if (tty == NULL) {
+			/* flush received characters */
+			new_rx_get = (new_rx_get + char_count) &
+					(rx_bufsize - 1);
+			info->rflush_count++;
+		} else {
+#ifdef BLOCKMOVE
+		/* we'd like to use memcpy(t, f, n) and memset(s, c, count)
+		   for performance, but because of buffer boundaries, there
+		   may be several steps to the operation */
+			while (1) {
+				len = tty_prepare_flip_string(tty, &buf,
+						char_count);
+				if (!len)
+					break;
+
+				len = min_t(unsigned int, min(len, char_count),
+						rx_bufsize - new_rx_get);
+
+				memcpy_fromio(buf, cinfo->base_addr +
+						rx_bufaddr + new_rx_get, len);
+
+				new_rx_get = (new_rx_get + len) &
+						(rx_bufsize - 1);
+				char_count -= len;
+				info->icount.rx += len;
+				info->idle_stats.recv_bytes += len;
+			}
+#else
+			len = tty_buffer_request_room(tty, char_count);
+			while (len--) {
+				data = readb(cinfo->base_addr + rx_bufaddr +
+						new_rx_get);
+				new_rx_get = (new_rx_get + 1) &
+							(rx_bufsize - 1);
+				tty_insert_flip_char(tty, data, TTY_NORMAL);
+				info->idle_stats.recv_bytes++;
+				info->icount.rx++;
+			}
+#endif
+#ifdef CONFIG_CYZ_INTR
+		/* Recalculate the number of chars in the RX buffer and issue
+		   a cmd in case it's higher than the RX high water mark */
+			rx_put = readl(&buf_ctrl->rx_put);
+			if (rx_put >= rx_get)
+				char_count = rx_put - rx_get;
+			else
+				char_count = rx_put - rx_get + rx_bufsize;
+			if (char_count >= readl(&buf_ctrl->rx_threshold) &&
+					!timer_pending(&cyz_rx_full_timer[
+							info->line]))
+				mod_timer(&cyz_rx_full_timer[info->line],
+						jiffies + 1);
+#endif
+			info->idle_stats.recv_idle = jiffies;
+			tty_schedule_flip(tty);
+		}
+		/* Update rx_get */
+		cy_writel(&buf_ctrl->rx_get, new_rx_get);
+	}
+}
+
+static void cyz_handle_tx(struct cyclades_port *info, struct tty_struct *tty)
+{
+	struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
+	struct cyclades_card *cinfo = info->card;
+	u8 data;
+	unsigned int char_count;
+#ifdef BLOCKMOVE
+	int small_count;
+#endif
+	__u32 tx_put, tx_get, tx_bufsize, tx_bufaddr;
+
+	if (info->xmit_cnt <= 0)	/* Nothing to transmit */
+		return;
+
+	tx_get = readl(&buf_ctrl->tx_get);
+	tx_put = readl(&buf_ctrl->tx_put);
+	tx_bufsize = readl(&buf_ctrl->tx_bufsize);
+	tx_bufaddr = readl(&buf_ctrl->tx_bufaddr);
+	if (tx_put >= tx_get)
+		char_count = tx_get - tx_put - 1 + tx_bufsize;
+	else
+		char_count = tx_get - tx_put - 1;
+
+	if (char_count) {
+
+		if (tty == NULL)
+			goto ztxdone;
+
+		if (info->x_char) {	/* send special char */
+			data = info->x_char;
+
+			cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data);
+			tx_put = (tx_put + 1) & (tx_bufsize - 1);
+			info->x_char = 0;
+			char_count--;
+			info->icount.tx++;
+		}
+#ifdef BLOCKMOVE
+		while (0 < (small_count = min_t(unsigned int,
+				tx_bufsize - tx_put, min_t(unsigned int,
+					(SERIAL_XMIT_SIZE - info->xmit_tail),
+					min_t(unsigned int, info->xmit_cnt,
+						char_count))))) {
+
+			memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr +
+					tx_put),
+					&info->port.xmit_buf[info->xmit_tail],
+					small_count);
+
+			tx_put = (tx_put + small_count) & (tx_bufsize - 1);
+			char_count -= small_count;
+			info->icount.tx += small_count;
+			info->xmit_cnt -= small_count;
+			info->xmit_tail = (info->xmit_tail + small_count) &
+					(SERIAL_XMIT_SIZE - 1);
+		}
+#else
+		while (info->xmit_cnt && char_count) {
+			data = info->port.xmit_buf[info->xmit_tail];
+			info->xmit_cnt--;
+			info->xmit_tail = (info->xmit_tail + 1) &
+					(SERIAL_XMIT_SIZE - 1);
+
+			cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data);
+			tx_put = (tx_put + 1) & (tx_bufsize - 1);
+			char_count--;
+			info->icount.tx++;
+		}
+#endif
+		tty_wakeup(tty);
+ztxdone:
+		/* Update tx_put */
+		cy_writel(&buf_ctrl->tx_put, tx_put);
+	}
+}
+
+static void cyz_handle_cmd(struct cyclades_card *cinfo)
+{
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
+	struct tty_struct *tty;
+	struct cyclades_port *info;
+	__u32 channel, param, fw_ver;
+	__u8 cmd;
+	int special_count;
+	int delta_count;
+
+	fw_ver = readl(&board_ctrl->fw_version);
+
+	while (cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
+		special_count = 0;
+		delta_count = 0;
+		info = &cinfo->ports[channel];
+		tty = tty_port_tty_get(&info->port);
+		if (tty == NULL)
+			continue;
+
+		switch (cmd) {
+		case C_CM_PR_ERROR:
+			tty_insert_flip_char(tty, 0, TTY_PARITY);
+			info->icount.rx++;
+			special_count++;
+			break;
+		case C_CM_FR_ERROR:
+			tty_insert_flip_char(tty, 0, TTY_FRAME);
+			info->icount.rx++;
+			special_count++;
+			break;
+		case C_CM_RXBRK:
+			tty_insert_flip_char(tty, 0, TTY_BREAK);
+			info->icount.rx++;
+			special_count++;
+			break;
+		case C_CM_MDCD:
+			info->icount.dcd++;
+			delta_count++;
+			if (info->port.flags & ASYNC_CHECK_CD) {
+				u32 dcd = fw_ver > 241 ? param :
+					readl(&info->u.cyz.ch_ctrl->rs_status);
+				if (dcd & C_RS_DCD)
+					wake_up_interruptible(&info->port.open_wait);
+				else
+					tty_hangup(tty);
+			}
+			break;
+		case C_CM_MCTS:
+			info->icount.cts++;
+			delta_count++;
+			break;
+		case C_CM_MRI:
+			info->icount.rng++;
+			delta_count++;
+			break;
+		case C_CM_MDSR:
+			info->icount.dsr++;
+			delta_count++;
+			break;
+#ifdef Z_WAKE
+		case C_CM_IOCTLW:
+			complete(&info->shutdown_wait);
+			break;
+#endif
+#ifdef CONFIG_CYZ_INTR
+		case C_CM_RXHIWM:
+		case C_CM_RXNNDT:
+		case C_CM_INTBACK2:
+			/* Reception Interrupt */
+#ifdef CY_DEBUG_INTERRUPTS
+			printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
+					"port %ld\n", info->card, channel);
+#endif
+			cyz_handle_rx(info, tty);
+			break;
+		case C_CM_TXBEMPTY:
+		case C_CM_TXLOWWM:
+		case C_CM_INTBACK:
+			/* Transmission Interrupt */
+#ifdef CY_DEBUG_INTERRUPTS
+			printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
+					"port %ld\n", info->card, channel);
+#endif
+			cyz_handle_tx(info, tty);
+			break;
+#endif				/* CONFIG_CYZ_INTR */
+		case C_CM_FATAL:
+			/* should do something with this !!! */
+			break;
+		default:
+			break;
+		}
+		if (delta_count)
+			wake_up_interruptible(&info->port.delta_msr_wait);
+		if (special_count)
+			tty_schedule_flip(tty);
+		tty_kref_put(tty);
+	}
+}
+
+#ifdef CONFIG_CYZ_INTR
+static irqreturn_t cyz_interrupt(int irq, void *dev_id)
+{
+	struct cyclades_card *cinfo = dev_id;
+
+	if (unlikely(!cyz_is_loaded(cinfo))) {
+#ifdef CY_DEBUG_INTERRUPTS
+		printk(KERN_DEBUG "cyz_interrupt: board not yet loaded "
+				"(IRQ%d).\n", irq);
+#endif
+		return IRQ_NONE;
+	}
+
+	/* Handle the interrupts */
+	cyz_handle_cmd(cinfo);
+
+	return IRQ_HANDLED;
+}				/* cyz_interrupt */
+
+static void cyz_rx_restart(unsigned long arg)
+{
+	struct cyclades_port *info = (struct cyclades_port *)arg;
+	struct cyclades_card *card = info->card;
+	int retval;
+	__u32 channel = info->line - card->first_line;
+	unsigned long flags;
+
+	spin_lock_irqsave(&card->card_lock, flags);
+	retval = cyz_issue_cmd(card, channel, C_CM_INTBACK2, 0L);
+	if (retval != 0) {
+		printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n",
+			info->line, retval);
+	}
+	spin_unlock_irqrestore(&card->card_lock, flags);
+}
+
+#else				/* CONFIG_CYZ_INTR */
+
+static void cyz_poll(unsigned long arg)
+{
+	struct cyclades_card *cinfo;
+	struct cyclades_port *info;
+	unsigned long expires = jiffies + HZ;
+	unsigned int port, card;
+
+	for (card = 0; card < NR_CARDS; card++) {
+		cinfo = &cy_card[card];
+
+		if (!cy_is_Z(cinfo))
+			continue;
+		if (!cyz_is_loaded(cinfo))
+			continue;
+
+	/* Skip first polling cycle to avoid racing conditions with the FW */
+		if (!cinfo->intr_enabled) {
+			cinfo->intr_enabled = 1;
+			continue;
+		}
+
+		cyz_handle_cmd(cinfo);
+
+		for (port = 0; port < cinfo->nports; port++) {
+			struct tty_struct *tty;
+
+			info = &cinfo->ports[port];
+			tty = tty_port_tty_get(&info->port);
+			/* OK to pass NULL to the handle functions below.
+			   They need to drop the data in that case. */
+
+			if (!info->throttle)
+				cyz_handle_rx(info, tty);
+			cyz_handle_tx(info, tty);
+			tty_kref_put(tty);
+		}
+		/* poll every 'cyz_polling_cycle' period */
+		expires = jiffies + cyz_polling_cycle;
+	}
+	mod_timer(&cyz_timerlist, expires);
+}				/* cyz_poll */
+
+#endif				/* CONFIG_CYZ_INTR */
+
+/********** End of block of Cyclades-Z specific code *********/
+/***********************************************************/
+
+/* This is called whenever a port becomes active;
+   interrupts are enabled and DTR & RTS are turned on.
+ */
+static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
+{
+	struct cyclades_card *card;
+	unsigned long flags;
+	int retval = 0;
+	int channel;
+	unsigned long page;
+
+	card = info->card;
+	channel = info->line - card->first_line;
+
+	page = get_zeroed_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&card->card_lock, flags);
+
+	if (info->port.flags & ASYNC_INITIALIZED)
+		goto errout;
+
+	if (!info->type) {
+		set_bit(TTY_IO_ERROR, &tty->flags);
+		goto errout;
+	}
+
+	if (info->port.xmit_buf)
+		free_page(page);
+	else
+		info->port.xmit_buf = (unsigned char *)page;
+
+	spin_unlock_irqrestore(&card->card_lock, flags);
+
+	cy_set_line_char(info, tty);
+
+	if (!cy_is_Z(card)) {
+		channel &= 0x03;
+
+		spin_lock_irqsave(&card->card_lock, flags);
+
+		cyy_writeb(info, CyCAR, channel);
+
+		cyy_writeb(info, CyRTPR,
+			(info->default_timeout ? info->default_timeout : 0x02));
+		/* 10ms rx timeout */
+
+		cyy_issue_cmd(info, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR);
+
+		cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0);
+
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyRxData);
+	} else {
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+
+		if (!cyz_is_loaded(card))
+			return -ENODEV;
+
+#ifdef CY_DEBUG_OPEN
+		printk(KERN_DEBUG "cyc startup Z card %d, channel %d, "
+			"base_addr %p\n", card, channel, card->base_addr);
+#endif
+		spin_lock_irqsave(&card->card_lock, flags);
+
+		cy_writel(&ch_ctrl->op_mode, C_CH_ENABLE);
+#ifdef Z_WAKE
+#ifdef CONFIG_CYZ_INTR
+		cy_writel(&ch_ctrl->intr_enable,
+			  C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
+			  C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD);
+#else
+		cy_writel(&ch_ctrl->intr_enable,
+			  C_IN_IOCTLW | C_IN_MDCD);
+#endif				/* CONFIG_CYZ_INTR */
+#else
+#ifdef CONFIG_CYZ_INTR
+		cy_writel(&ch_ctrl->intr_enable,
+			  C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
+			  C_IN_RXNNDT | C_IN_MDCD);
+#else
+		cy_writel(&ch_ctrl->intr_enable, C_IN_MDCD);
+#endif				/* CONFIG_CYZ_INTR */
+#endif				/* Z_WAKE */
+
+		retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L);
+		if (retval != 0) {
+			printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was "
+				"%x\n", info->line, retval);
+		}
+
+		/* Flush RX buffers before raising DTR and RTS */
+		retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_RX, 0L);
+		if (retval != 0) {
+			printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was "
+				"%x\n", info->line, retval);
+		}
+
+		/* set timeout !!! */
+		/* set RTS and DTR !!! */
+		tty_port_raise_dtr_rts(&info->port);
+
+		/* enable send, recv, modem !!! */
+	}
+
+	info->port.flags |= ASYNC_INITIALIZED;
+
+	clear_bit(TTY_IO_ERROR, &tty->flags);
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+	info->breakon = info->breakoff = 0;
+	memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
+	info->idle_stats.in_use =
+	info->idle_stats.recv_idle =
+	info->idle_stats.xmit_idle = jiffies;
+
+	spin_unlock_irqrestore(&card->card_lock, flags);
+
+#ifdef CY_DEBUG_OPEN
+	printk(KERN_DEBUG "cyc startup done\n");
+#endif
+	return 0;
+
+errout:
+	spin_unlock_irqrestore(&card->card_lock, flags);
+	free_page(page);
+	return retval;
+}				/* startup */
+
+static void start_xmit(struct cyclades_port *info)
+{
+	struct cyclades_card *card = info->card;
+	unsigned long flags;
+	int channel = info->line - card->first_line;
+
+	if (!cy_is_Z(card)) {
+		spin_lock_irqsave(&card->card_lock, flags);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
+		spin_unlock_irqrestore(&card->card_lock, flags);
+	} else {
+#ifdef CONFIG_CYZ_INTR
+		int retval;
+
+		spin_lock_irqsave(&card->card_lock, flags);
+		retval = cyz_issue_cmd(card, channel, C_CM_INTBACK, 0L);
+		if (retval != 0) {
+			printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was "
+				"%x\n", info->line, retval);
+		}
+		spin_unlock_irqrestore(&card->card_lock, flags);
+#else				/* CONFIG_CYZ_INTR */
+		/* Don't have to do anything at this time */
+#endif				/* CONFIG_CYZ_INTR */
+	}
+}				/* start_xmit */
+
+/*
+ * This routine shuts down a serial port; interrupts are disabled,
+ * and DTR is dropped if the hangup on close termio flag is on.
+ */
+static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
+{
+	struct cyclades_card *card;
+	unsigned long flags;
+	int channel;
+
+	if (!(info->port.flags & ASYNC_INITIALIZED))
+		return;
+
+	card = info->card;
+	channel = info->line - card->first_line;
+	if (!cy_is_Z(card)) {
+		spin_lock_irqsave(&card->card_lock, flags);
+
+		/* Clear delta_msr_wait queue to avoid mem leaks. */
+		wake_up_interruptible(&info->port.delta_msr_wait);
+
+		if (info->port.xmit_buf) {
+			unsigned char *temp;
+			temp = info->port.xmit_buf;
+			info->port.xmit_buf = NULL;
+			free_page((unsigned long)temp);
+		}
+		if (tty->termios->c_cflag & HUPCL)
+			cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
+
+		cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
+		/* it may be appropriate to clear _XMIT at
+		   some later date (after testing)!!! */
+
+		set_bit(TTY_IO_ERROR, &tty->flags);
+		info->port.flags &= ~ASYNC_INITIALIZED;
+		spin_unlock_irqrestore(&card->card_lock, flags);
+	} else {
+#ifdef CY_DEBUG_OPEN
+		printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, "
+			"base_addr %p\n", card, channel, card->base_addr);
+#endif
+
+		if (!cyz_is_loaded(card))
+			return;
+
+		spin_lock_irqsave(&card->card_lock, flags);
+
+		if (info->port.xmit_buf) {
+			unsigned char *temp;
+			temp = info->port.xmit_buf;
+			info->port.xmit_buf = NULL;
+			free_page((unsigned long)temp);
+		}
+
+		if (tty->termios->c_cflag & HUPCL)
+			tty_port_lower_dtr_rts(&info->port);
+
+		set_bit(TTY_IO_ERROR, &tty->flags);
+		info->port.flags &= ~ASYNC_INITIALIZED;
+
+		spin_unlock_irqrestore(&card->card_lock, flags);
+	}
+
+#ifdef CY_DEBUG_OPEN
+	printk(KERN_DEBUG "cyc shutdown done\n");
+#endif
+}				/* shutdown */
+
+/*
+ * ------------------------------------------------------------
+ * cy_open() and friends
+ * ------------------------------------------------------------
+ */
+
+/*
+ * This routine is called whenever a serial port is opened.  It
+ * performs the serial-specific initialization for the tty structure.
+ */
+static int cy_open(struct tty_struct *tty, struct file *filp)
+{
+	struct cyclades_port *info;
+	unsigned int i, line;
+	int retval;
+
+	line = tty->index;
+	if (tty->index < 0 || NR_PORTS <= line)
+		return -ENODEV;
+
+	for (i = 0; i < NR_CARDS; i++)
+		if (line < cy_card[i].first_line + cy_card[i].nports &&
+				line >= cy_card[i].first_line)
+			break;
+	if (i >= NR_CARDS)
+		return -ENODEV;
+	info = &cy_card[i].ports[line - cy_card[i].first_line];
+	if (info->line < 0)
+		return -ENODEV;
+
+	/* If the card's firmware hasn't been loaded,
+	   treat it as absent from the system.  This
+	   will make the user pay attention.
+	 */
+	if (cy_is_Z(info->card)) {
+		struct cyclades_card *cinfo = info->card;
+		struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS;
+
+		if (!cyz_is_loaded(cinfo)) {
+			if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) &&
+					readl(&firm_id->signature) ==
+					ZFIRM_HLT) {
+				printk(KERN_ERR "cyc:Cyclades-Z Error: you "
+					"need an external power supply for "
+					"this number of ports.\nFirmware "
+					"halted.\n");
+			} else {
+				printk(KERN_ERR "cyc:Cyclades-Z firmware not "
+					"yet loaded\n");
+			}
+			return -ENODEV;
+		}
+#ifdef CONFIG_CYZ_INTR
+		else {
+		/* In case this Z board is operating in interrupt mode, its
+		   interrupts should be enabled as soon as the first open
+		   happens to one of its ports. */
+			if (!cinfo->intr_enabled) {
+				u16 intr;
+
+				/* Enable interrupts on the PLX chip */
+				intr = readw(&cinfo->ctl_addr.p9060->
+						intr_ctrl_stat) | 0x0900;
+				cy_writew(&cinfo->ctl_addr.p9060->
+						intr_ctrl_stat, intr);
+				/* Enable interrupts on the FW */
+				retval = cyz_issue_cmd(cinfo, 0,
+						C_CM_IRQ_ENBL, 0L);
+				if (retval != 0) {
+					printk(KERN_ERR "cyc:IRQ enable retval "
+						"was %x\n", retval);
+				}
+				cinfo->intr_enabled = 1;
+			}
+		}
+#endif				/* CONFIG_CYZ_INTR */
+		/* Make sure this Z port really exists in hardware */
+		if (info->line > (cinfo->first_line + cinfo->nports - 1))
+			return -ENODEV;
+	}
+#ifdef CY_DEBUG_OTHER
+	printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
+#endif
+	tty->driver_data = info;
+	if (serial_paranoia_check(info, tty->name, "cy_open"))
+		return -ENODEV;
+
+#ifdef CY_DEBUG_OPEN
+	printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line,
+			info->port.count);
+#endif
+	info->port.count++;
+#ifdef CY_DEBUG_COUNT
+	printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n",
+		current->pid, info->port.count);
+#endif
+
+	/*
+	 * If the port is the middle of closing, bail out now
+	 */
+	if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
+		wait_event_interruptible_tty(info->port.close_wait,
+				!(info->port.flags & ASYNC_CLOSING));
+		return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
+	}
+
+	/*
+	 * Start up serial port
+	 */
+	retval = cy_startup(info, tty);
+	if (retval)
+		return retval;
+
+	retval = tty_port_block_til_ready(&info->port, tty, filp);
+	if (retval) {
+#ifdef CY_DEBUG_OPEN
+		printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready "
+			"with %d\n", retval);
+#endif
+		return retval;
+	}
+
+	info->throttle = 0;
+	tty_port_tty_set(&info->port, tty);
+
+#ifdef CY_DEBUG_OPEN
+	printk(KERN_DEBUG "cyc:cy_open done\n");
+#endif
+	return 0;
+}				/* cy_open */
+
+/*
+ * cy_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct cyclades_card *card;
+	struct cyclades_port *info = tty->driver_data;
+	unsigned long orig_jiffies;
+	int char_time;
+
+	if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent"))
+		return;
+
+	if (info->xmit_fifo_size == 0)
+		return;		/* Just in case.... */
+
+	orig_jiffies = jiffies;
+	/*
+	 * Set the check interval to be 1/5 of the estimated time to
+	 * send a single character, and make it at least 1.  The check
+	 * interval should also be less than the timeout.
+	 *
+	 * Note: we have to use pretty tight timings here to satisfy
+	 * the NIST-PCTS.
+	 */
+	char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
+	char_time = char_time / 5;
+	if (char_time <= 0)
+		char_time = 1;
+	if (timeout < 0)
+		timeout = 0;
+	if (timeout)
+		char_time = min(char_time, timeout);
+	/*
+	 * If the transmitter hasn't cleared in twice the approximate
+	 * amount of time to send the entire FIFO, it probably won't
+	 * ever clear.  This assumes the UART isn't doing flow
+	 * control, which is currently the case.  Hence, if it ever
+	 * takes longer than info->timeout, this is probably due to a
+	 * UART bug of some kind.  So, we clamp the timeout parameter at
+	 * 2*info->timeout.
+	 */
+	if (!timeout || timeout > 2 * info->timeout)
+		timeout = 2 * info->timeout;
+#ifdef CY_DEBUG_WAIT_UNTIL_SENT
+	printk(KERN_DEBUG "In cy_wait_until_sent(%d) check=%d, jiff=%lu...",
+		timeout, char_time, jiffies);
+#endif
+	card = info->card;
+	if (!cy_is_Z(card)) {
+		while (cyy_readb(info, CySRER) & CyTxRdy) {
+#ifdef CY_DEBUG_WAIT_UNTIL_SENT
+			printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies);
+#endif
+			if (msleep_interruptible(jiffies_to_msecs(char_time)))
+				break;
+			if (timeout && time_after(jiffies, orig_jiffies +
+					timeout))
+				break;
+		}
+	}
+	/* Run one more char cycle */
+	msleep_interruptible(jiffies_to_msecs(char_time * 5));
+#ifdef CY_DEBUG_WAIT_UNTIL_SENT
+	printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies);
+#endif
+}
+
+static void cy_flush_buffer(struct tty_struct *tty)
+{
+	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_card *card;
+	int channel, retval;
+	unsigned long flags;
+
+#ifdef CY_DEBUG_IO
+	printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line);
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
+		return;
+
+	card = info->card;
+	channel = info->line - card->first_line;
+
+	spin_lock_irqsave(&card->card_lock, flags);
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+	spin_unlock_irqrestore(&card->card_lock, flags);
+
+	if (cy_is_Z(card)) {	/* If it is a Z card, flush the on-board
+					   buffers as well */
+		spin_lock_irqsave(&card->card_lock, flags);
+		retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L);
+		if (retval != 0) {
+			printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d "
+				"was %x\n", info->line, retval);
+		}
+		spin_unlock_irqrestore(&card->card_lock, flags);
+	}
+	tty_wakeup(tty);
+}				/* cy_flush_buffer */
+
+
+static void cy_do_close(struct tty_port *port)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+								port);
+	struct cyclades_card *card;
+	unsigned long flags;
+	int channel;
+
+	card = info->card;
+	channel = info->line - card->first_line;
+	spin_lock_irqsave(&card->card_lock, flags);
+
+	if (!cy_is_Z(card)) {
+		/* Stop accepting input */
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyRxData);
+		if (info->port.flags & ASYNC_INITIALIZED) {
+			/* Waiting for on-board buffers to be empty before
+			   closing the port */
+			spin_unlock_irqrestore(&card->card_lock, flags);
+			cy_wait_until_sent(port->tty, info->timeout);
+			spin_lock_irqsave(&card->card_lock, flags);
+		}
+	} else {
+#ifdef Z_WAKE
+		/* Waiting for on-board buffers to be empty before closing
+		   the port */
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+		int retval;
+
+		if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) {
+			retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L);
+			if (retval != 0) {
+				printk(KERN_DEBUG "cyc:cy_close retval on "
+					"ttyC%d was %x\n", info->line, retval);
+			}
+			spin_unlock_irqrestore(&card->card_lock, flags);
+			wait_for_completion_interruptible(&info->shutdown_wait);
+			spin_lock_irqsave(&card->card_lock, flags);
+		}
+#endif
+	}
+	spin_unlock_irqrestore(&card->card_lock, flags);
+	cy_shutdown(info, port->tty);
+}
+
+/*
+ * This routine is called when a particular tty device is closed.
+ */
+static void cy_close(struct tty_struct *tty, struct file *filp)
+{
+	struct cyclades_port *info = tty->driver_data;
+	if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
+		return;
+	tty_port_close(&info->port, tty, filp);
+}				/* cy_close */
+
+/* This routine gets called when tty_write has put something into
+ * the write_queue.  The characters may come from user space or
+ * kernel space.
+ *
+ * This routine will return the number of characters actually
+ * accepted for writing.
+ *
+ * If the port is not already transmitting stuff, start it off by
+ * enabling interrupts.  The interrupt service routine will then
+ * ensure that the characters are sent.
+ * If the port is already active, there is no need to kick it.
+ *
+ */
+static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+	struct cyclades_port *info = tty->driver_data;
+	unsigned long flags;
+	int c, ret = 0;
+
+#ifdef CY_DEBUG_IO
+	printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line);
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "cy_write"))
+		return 0;
+
+	if (!info->port.xmit_buf)
+		return 0;
+
+	spin_lock_irqsave(&info->card->card_lock, flags);
+	while (1) {
+		c = min(count, (int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1));
+		c = min(c, (int)(SERIAL_XMIT_SIZE - info->xmit_head));
+
+		if (c <= 0)
+			break;
+
+		memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
+		info->xmit_head = (info->xmit_head + c) &
+			(SERIAL_XMIT_SIZE - 1);
+		info->xmit_cnt += c;
+		buf += c;
+		count -= c;
+		ret += c;
+	}
+	spin_unlock_irqrestore(&info->card->card_lock, flags);
+
+	info->idle_stats.xmit_bytes += ret;
+	info->idle_stats.xmit_idle = jiffies;
+
+	if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped)
+		start_xmit(info);
+
+	return ret;
+}				/* cy_write */
+
+/*
+ * This routine is called by the kernel to write a single
+ * character to the tty device.  If the kernel uses this routine,
+ * it must call the flush_chars() routine (if defined) when it is
+ * done stuffing characters into the driver.  If there is no room
+ * in the queue, the character is ignored.
+ */
+static int cy_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct cyclades_port *info = tty->driver_data;
+	unsigned long flags;
+
+#ifdef CY_DEBUG_IO
+	printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line);
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "cy_put_char"))
+		return 0;
+
+	if (!info->port.xmit_buf)
+		return 0;
+
+	spin_lock_irqsave(&info->card->card_lock, flags);
+	if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) {
+		spin_unlock_irqrestore(&info->card->card_lock, flags);
+		return 0;
+	}
+
+	info->port.xmit_buf[info->xmit_head++] = ch;
+	info->xmit_head &= SERIAL_XMIT_SIZE - 1;
+	info->xmit_cnt++;
+	info->idle_stats.xmit_bytes++;
+	info->idle_stats.xmit_idle = jiffies;
+	spin_unlock_irqrestore(&info->card->card_lock, flags);
+	return 1;
+}				/* cy_put_char */
+
+/*
+ * This routine is called by the kernel after it has written a
+ * series of characters to the tty device using put_char().
+ */
+static void cy_flush_chars(struct tty_struct *tty)
+{
+	struct cyclades_port *info = tty->driver_data;
+
+#ifdef CY_DEBUG_IO
+	printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line);
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "cy_flush_chars"))
+		return;
+
+	if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
+			!info->port.xmit_buf)
+		return;
+
+	start_xmit(info);
+}				/* cy_flush_chars */
+
+/*
+ * This routine returns the numbers of characters the tty driver
+ * will accept for queuing to be written.  This number is subject
+ * to change as output buffers get emptied, or if the output flow
+ * control is activated.
+ */
+static int cy_write_room(struct tty_struct *tty)
+{
+	struct cyclades_port *info = tty->driver_data;
+	int ret;
+
+#ifdef CY_DEBUG_IO
+	printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line);
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "cy_write_room"))
+		return 0;
+	ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
+	if (ret < 0)
+		ret = 0;
+	return ret;
+}				/* cy_write_room */
+
+static int cy_chars_in_buffer(struct tty_struct *tty)
+{
+	struct cyclades_port *info = tty->driver_data;
+
+	if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
+		return 0;
+
+#ifdef Z_EXT_CHARS_IN_BUFFER
+	if (!cy_is_Z(info->card)) {
+#endif				/* Z_EXT_CHARS_IN_BUFFER */
+#ifdef CY_DEBUG_IO
+		printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
+			info->line, info->xmit_cnt);
+#endif
+		return info->xmit_cnt;
+#ifdef Z_EXT_CHARS_IN_BUFFER
+	} else {
+		struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
+		int char_count;
+		__u32 tx_put, tx_get, tx_bufsize;
+
+		tx_get = readl(&buf_ctrl->tx_get);
+		tx_put = readl(&buf_ctrl->tx_put);
+		tx_bufsize = readl(&buf_ctrl->tx_bufsize);
+		if (tx_put >= tx_get)
+			char_count = tx_put - tx_get;
+		else
+			char_count = tx_put - tx_get + tx_bufsize;
+#ifdef CY_DEBUG_IO
+		printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
+			info->line, info->xmit_cnt + char_count);
+#endif
+		return info->xmit_cnt + char_count;
+	}
+#endif				/* Z_EXT_CHARS_IN_BUFFER */
+}				/* cy_chars_in_buffer */
+
+/*
+ * ------------------------------------------------------------
+ * cy_ioctl() and friends
+ * ------------------------------------------------------------
+ */
+
+static void cyy_baud_calc(struct cyclades_port *info, __u32 baud)
+{
+	int co, co_val, bpr;
+	__u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 :
+			25000000);
+
+	if (baud == 0) {
+		info->tbpr = info->tco = info->rbpr = info->rco = 0;
+		return;
+	}
+
+	/* determine which prescaler to use */
+	for (co = 4, co_val = 2048; co; co--, co_val >>= 2) {
+		if (cy_clock / co_val / baud > 63)
+			break;
+	}
+
+	bpr = (cy_clock / co_val * 2 / baud + 1) / 2;
+	if (bpr > 255)
+		bpr = 255;
+
+	info->tbpr = info->rbpr = bpr;
+	info->tco = info->rco = co;
+}
+
+/*
+ * This routine finds or computes the various line characteristics.
+ * It used to be called config_setup
+ */
+static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
+{
+	struct cyclades_card *card;
+	unsigned long flags;
+	int channel;
+	unsigned cflag, iflag;
+	int baud, baud_rate = 0;
+	int i;
+
+	if (!tty->termios) /* XXX can this happen at all? */
+		return;
+
+	if (info->line == -1)
+		return;
+
+	cflag = tty->termios->c_cflag;
+	iflag = tty->termios->c_iflag;
+
+	/*
+	 * Set up the tty->alt_speed kludge
+	 */
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+		tty->alt_speed = 57600;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+		tty->alt_speed = 115200;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+		tty->alt_speed = 230400;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+		tty->alt_speed = 460800;
+
+	card = info->card;
+	channel = info->line - card->first_line;
+
+	if (!cy_is_Z(card)) {
+		u32 cflags;
+
+		/* baud rate */
+		baud = tty_get_baud_rate(tty);
+		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
+				ASYNC_SPD_CUST) {
+			if (info->custom_divisor)
+				baud_rate = info->baud / info->custom_divisor;
+			else
+				baud_rate = info->baud;
+		} else if (baud > CD1400_MAX_SPEED) {
+			baud = CD1400_MAX_SPEED;
+		}
+		/* find the baud index */
+		for (i = 0; i < 20; i++) {
+			if (baud == baud_table[i])
+				break;
+		}
+		if (i == 20)
+			i = 19;	/* CD1400_MAX_SPEED */
+
+		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
+				ASYNC_SPD_CUST) {
+			cyy_baud_calc(info, baud_rate);
+		} else {
+			if (info->chip_rev >= CD1400_REV_J) {
+				/* It is a CD1400 rev. J or later */
+				info->tbpr = baud_bpr_60[i];	/* Tx BPR */
+				info->tco = baud_co_60[i];	/* Tx CO */
+				info->rbpr = baud_bpr_60[i];	/* Rx BPR */
+				info->rco = baud_co_60[i];	/* Rx CO */
+			} else {
+				info->tbpr = baud_bpr_25[i];	/* Tx BPR */
+				info->tco = baud_co_25[i];	/* Tx CO */
+				info->rbpr = baud_bpr_25[i];	/* Rx BPR */
+				info->rco = baud_co_25[i];	/* Rx CO */
+			}
+		}
+		if (baud_table[i] == 134) {
+			/* get it right for 134.5 baud */
+			info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
+					2;
+		} else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
+				ASYNC_SPD_CUST) {
+			info->timeout = (info->xmit_fifo_size * HZ * 15 /
+					baud_rate) + 2;
+		} else if (baud_table[i]) {
+			info->timeout = (info->xmit_fifo_size * HZ * 15 /
+					baud_table[i]) + 2;
+			/* this needs to be propagated into the card info */
+		} else {
+			info->timeout = 0;
+		}
+		/* By tradition (is it a standard?) a baud rate of zero
+		   implies the line should be/has been closed.  A bit
+		   later in this routine such a test is performed. */
+
+		/* byte size and parity */
+		info->cor5 = 0;
+		info->cor4 = 0;
+		/* receive threshold */
+		info->cor3 = (info->default_threshold ?
+				info->default_threshold : baud_cor3[i]);
+		info->cor2 = CyETC;
+		switch (cflag & CSIZE) {
+		case CS5:
+			info->cor1 = Cy_5_BITS;
+			break;
+		case CS6:
+			info->cor1 = Cy_6_BITS;
+			break;
+		case CS7:
+			info->cor1 = Cy_7_BITS;
+			break;
+		case CS8:
+			info->cor1 = Cy_8_BITS;
+			break;
+		}
+		if (cflag & CSTOPB)
+			info->cor1 |= Cy_2_STOP;
+
+		if (cflag & PARENB) {
+			if (cflag & PARODD)
+				info->cor1 |= CyPARITY_O;
+			else
+				info->cor1 |= CyPARITY_E;
+		} else
+			info->cor1 |= CyPARITY_NONE;
+
+		/* CTS flow control flag */
+		if (cflag & CRTSCTS) {
+			info->port.flags |= ASYNC_CTS_FLOW;
+			info->cor2 |= CyCtsAE;
+		} else {
+			info->port.flags &= ~ASYNC_CTS_FLOW;
+			info->cor2 &= ~CyCtsAE;
+		}
+		if (cflag & CLOCAL)
+			info->port.flags &= ~ASYNC_CHECK_CD;
+		else
+			info->port.flags |= ASYNC_CHECK_CD;
+
+	 /***********************************************
+	    The hardware option, CyRtsAO, presents RTS when
+	    the chip has characters to send.  Since most modems
+	    use RTS as reverse (inbound) flow control, this
+	    option is not used.  If inbound flow control is
+	    necessary, DTR can be programmed to provide the
+	    appropriate signals for use with a non-standard
+	    cable.  Contact Marcio Saito for details.
+	 ***********************************************/
+
+		channel &= 0x03;
+
+		spin_lock_irqsave(&card->card_lock, flags);
+		cyy_writeb(info, CyCAR, channel);
+
+		/* tx and rx baud rate */
+
+		cyy_writeb(info, CyTCOR, info->tco);
+		cyy_writeb(info, CyTBPR, info->tbpr);
+		cyy_writeb(info, CyRCOR, info->rco);
+		cyy_writeb(info, CyRBPR, info->rbpr);
+
+		/* set line characteristics  according configuration */
+
+		cyy_writeb(info, CySCHR1, START_CHAR(tty));
+		cyy_writeb(info, CySCHR2, STOP_CHAR(tty));
+		cyy_writeb(info, CyCOR1, info->cor1);
+		cyy_writeb(info, CyCOR2, info->cor2);
+		cyy_writeb(info, CyCOR3, info->cor3);
+		cyy_writeb(info, CyCOR4, info->cor4);
+		cyy_writeb(info, CyCOR5, info->cor5);
+
+		cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
+				CyCOR3ch);
+
+		/* !!! Is this needed? */
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, CyRTPR,
+			(info->default_timeout ? info->default_timeout : 0x02));
+		/* 10ms rx timeout */
+
+		cflags = CyCTS;
+		if (!C_CLOCAL(tty))
+			cflags |= CyDSR | CyRI | CyDCD;
+		/* without modem intr */
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyMdmCh);
+		/* act on 1->0 modem transitions */
+		if ((cflag & CRTSCTS) && info->rflow)
+			cyy_writeb(info, CyMCOR1, cflags | rflow_thr[i]);
+		else
+			cyy_writeb(info, CyMCOR1, cflags);
+		/* act on 0->1 modem transitions */
+		cyy_writeb(info, CyMCOR2, cflags);
+
+		if (i == 0)	/* baud rate is zero, turn off line */
+			cyy_change_rts_dtr(info, 0, TIOCM_DTR);
+		else
+			cyy_change_rts_dtr(info, TIOCM_DTR, 0);
+
+		clear_bit(TTY_IO_ERROR, &tty->flags);
+		spin_unlock_irqrestore(&card->card_lock, flags);
+
+	} else {
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+		__u32 sw_flow;
+		int retval;
+
+		if (!cyz_is_loaded(card))
+			return;
+
+		/* baud rate */
+		baud = tty_get_baud_rate(tty);
+		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
+				ASYNC_SPD_CUST) {
+			if (info->custom_divisor)
+				baud_rate = info->baud / info->custom_divisor;
+			else
+				baud_rate = info->baud;
+		} else if (baud > CYZ_MAX_SPEED) {
+			baud = CYZ_MAX_SPEED;
+		}
+		cy_writel(&ch_ctrl->comm_baud, baud);
+
+		if (baud == 134) {
+			/* get it right for 134.5 baud */
+			info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
+					2;
+		} else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
+				ASYNC_SPD_CUST) {
+			info->timeout = (info->xmit_fifo_size * HZ * 15 /
+					baud_rate) + 2;
+		} else if (baud) {
+			info->timeout = (info->xmit_fifo_size * HZ * 15 /
+					baud) + 2;
+			/* this needs to be propagated into the card info */
+		} else {
+			info->timeout = 0;
+		}
+
+		/* byte size and parity */
+		switch (cflag & CSIZE) {
+		case CS5:
+			cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5);
+			break;
+		case CS6:
+			cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6);
+			break;
+		case CS7:
+			cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7);
+			break;
+		case CS8:
+			cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8);
+			break;
+		}
+		if (cflag & CSTOPB) {
+			cy_writel(&ch_ctrl->comm_data_l,
+				  readl(&ch_ctrl->comm_data_l) | C_DL_2STOP);
+		} else {
+			cy_writel(&ch_ctrl->comm_data_l,
+				  readl(&ch_ctrl->comm_data_l) | C_DL_1STOP);
+		}
+		if (cflag & PARENB) {
+			if (cflag & PARODD)
+				cy_writel(&ch_ctrl->comm_parity, C_PR_ODD);
+			else
+				cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN);
+		} else
+			cy_writel(&ch_ctrl->comm_parity, C_PR_NONE);
+
+		/* CTS flow control flag */
+		if (cflag & CRTSCTS) {
+			cy_writel(&ch_ctrl->hw_flow,
+				readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS);
+		} else {
+			cy_writel(&ch_ctrl->hw_flow, readl(&ch_ctrl->hw_flow) &
+					~(C_RS_CTS | C_RS_RTS));
+		}
+		/* As the HW flow control is done in firmware, the driver
+		   doesn't need to care about it */
+		info->port.flags &= ~ASYNC_CTS_FLOW;
+
+		/* XON/XOFF/XANY flow control flags */
+		sw_flow = 0;
+		if (iflag & IXON) {
+			sw_flow |= C_FL_OXX;
+			if (iflag & IXANY)
+				sw_flow |= C_FL_OIXANY;
+		}
+		cy_writel(&ch_ctrl->sw_flow, sw_flow);
+
+		retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L);
+		if (retval != 0) {
+			printk(KERN_ERR "cyc:set_line_char retval on ttyC%d "
+				"was %x\n", info->line, retval);
+		}
+
+		/* CD sensitivity */
+		if (cflag & CLOCAL)
+			info->port.flags &= ~ASYNC_CHECK_CD;
+		else
+			info->port.flags |= ASYNC_CHECK_CD;
+
+		if (baud == 0) {	/* baud rate is zero, turn off line */
+			cy_writel(&ch_ctrl->rs_control,
+				  readl(&ch_ctrl->rs_control) & ~C_RS_DTR);
+#ifdef CY_DEBUG_DTR
+			printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n");
+#endif
+		} else {
+			cy_writel(&ch_ctrl->rs_control,
+				  readl(&ch_ctrl->rs_control) | C_RS_DTR);
+#ifdef CY_DEBUG_DTR
+			printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n");
+#endif
+		}
+
+		retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
+		if (retval != 0) {
+			printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d "
+				"was %x\n", info->line, retval);
+		}
+
+		clear_bit(TTY_IO_ERROR, &tty->flags);
+	}
+}				/* set_line_char */
+
+static int cy_get_serial_info(struct cyclades_port *info,
+		struct serial_struct __user *retinfo)
+{
+	struct cyclades_card *cinfo = info->card;
+	struct serial_struct tmp = {
+		.type = info->type,
+		.line = info->line,
+		.port = (info->card - cy_card) * 0x100 + info->line -
+			cinfo->first_line,
+		.irq = cinfo->irq,
+		.flags = info->port.flags,
+		.close_delay = info->port.close_delay,
+		.closing_wait = info->port.closing_wait,
+		.baud_base = info->baud,
+		.custom_divisor = info->custom_divisor,
+		.hub6 = 0,		/*!!! */
+	};
+	return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
+}
+
+static int
+cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
+		struct serial_struct __user *new_info)
+{
+	struct serial_struct new_serial;
+	int ret;
+
+	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+		return -EFAULT;
+
+	mutex_lock(&info->port.mutex);
+	if (!capable(CAP_SYS_ADMIN)) {
+		if (new_serial.close_delay != info->port.close_delay ||
+				new_serial.baud_base != info->baud ||
+				(new_serial.flags & ASYNC_FLAGS &
+					~ASYNC_USR_MASK) !=
+				(info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
+		{
+			mutex_unlock(&info->port.mutex);
+			return -EPERM;
+		}
+		info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) |
+				(new_serial.flags & ASYNC_USR_MASK);
+		info->baud = new_serial.baud_base;
+		info->custom_divisor = new_serial.custom_divisor;
+		goto check_and_exit;
+	}
+
+	/*
+	 * OK, past this point, all the error checking has been done.
+	 * At this point, we start making changes.....
+	 */
+
+	info->baud = new_serial.baud_base;
+	info->custom_divisor = new_serial.custom_divisor;
+	info->port.flags = (info->port.flags & ~ASYNC_FLAGS) |
+			(new_serial.flags & ASYNC_FLAGS);
+	info->port.close_delay = new_serial.close_delay * HZ / 100;
+	info->port.closing_wait = new_serial.closing_wait * HZ / 100;
+
+check_and_exit:
+	if (info->port.flags & ASYNC_INITIALIZED) {
+		cy_set_line_char(info, tty);
+		ret = 0;
+	} else {
+		ret = cy_startup(info, tty);
+	}
+	mutex_unlock(&info->port.mutex);
+	return ret;
+}				/* set_serial_info */
+
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ *	    is emptied.  On bus types like RS485, the transmitter must
+ *	    release the bus after transmitting. This must be done when
+ *	    the transmit shift register is empty, not be done when the
+ *	    transmit holding register is empty.  This functionality
+ *	    allows an RS485 driver to be written in user space.
+ */
+static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
+{
+	struct cyclades_card *card = info->card;
+	unsigned int result;
+	unsigned long flags;
+	u8 status;
+
+	if (!cy_is_Z(card)) {
+		spin_lock_irqsave(&card->card_lock, flags);
+		status = cyy_readb(info, CySRER) & (CyTxRdy | CyTxMpty);
+		spin_unlock_irqrestore(&card->card_lock, flags);
+		result = (status ? 0 : TIOCSER_TEMT);
+	} else {
+		/* Not supported yet */
+		return -EINVAL;
+	}
+	return put_user(result, (unsigned long __user *)value);
+}
+
+static int cy_tiocmget(struct tty_struct *tty)
+{
+	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_card *card;
+	int result;
+
+	if (serial_paranoia_check(info, tty->name, __func__))
+		return -ENODEV;
+
+	card = info->card;
+
+	if (!cy_is_Z(card)) {
+		unsigned long flags;
+		int channel = info->line - card->first_line;
+		u8 status;
+
+		spin_lock_irqsave(&card->card_lock, flags);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		status = cyy_readb(info, CyMSVR1);
+		status |= cyy_readb(info, CyMSVR2);
+		spin_unlock_irqrestore(&card->card_lock, flags);
+
+		if (info->rtsdtr_inv) {
+			result = ((status & CyRTS) ? TIOCM_DTR : 0) |
+				((status & CyDTR) ? TIOCM_RTS : 0);
+		} else {
+			result = ((status & CyRTS) ? TIOCM_RTS : 0) |
+				((status & CyDTR) ? TIOCM_DTR : 0);
+		}
+		result |= ((status & CyDCD) ? TIOCM_CAR : 0) |
+			((status & CyRI) ? TIOCM_RNG : 0) |
+			((status & CyDSR) ? TIOCM_DSR : 0) |
+			((status & CyCTS) ? TIOCM_CTS : 0);
+	} else {
+		u32 lstatus;
+
+		if (!cyz_is_loaded(card)) {
+			result = -ENODEV;
+			goto end;
+		}
+
+		lstatus = readl(&info->u.cyz.ch_ctrl->rs_status);
+		result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
+			((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
+			((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
+			((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
+			((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
+			((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
+	}
+end:
+	return result;
+}				/* cy_tiomget */
+
+static int
+cy_tiocmset(struct tty_struct *tty,
+		unsigned int set, unsigned int clear)
+{
+	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_card *card;
+	unsigned long flags;
+
+	if (serial_paranoia_check(info, tty->name, __func__))
+		return -ENODEV;
+
+	card = info->card;
+	if (!cy_is_Z(card)) {
+		spin_lock_irqsave(&card->card_lock, flags);
+		cyy_change_rts_dtr(info, set, clear);
+		spin_unlock_irqrestore(&card->card_lock, flags);
+	} else {
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+		int retval, channel = info->line - card->first_line;
+		u32 rs;
+
+		if (!cyz_is_loaded(card))
+			return -ENODEV;
+
+		spin_lock_irqsave(&card->card_lock, flags);
+		rs = readl(&ch_ctrl->rs_control);
+		if (set & TIOCM_RTS)
+			rs |= C_RS_RTS;
+		if (clear & TIOCM_RTS)
+			rs &= ~C_RS_RTS;
+		if (set & TIOCM_DTR) {
+			rs |= C_RS_DTR;
+#ifdef CY_DEBUG_DTR
+			printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n");
+#endif
+		}
+		if (clear & TIOCM_DTR) {
+			rs &= ~C_RS_DTR;
+#ifdef CY_DEBUG_DTR
+			printk(KERN_DEBUG "cyc:set_modem_info clearing "
+				"Z DTR\n");
+#endif
+		}
+		cy_writel(&ch_ctrl->rs_control, rs);
+		retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
+		spin_unlock_irqrestore(&card->card_lock, flags);
+		if (retval != 0) {
+			printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d "
+				"was %x\n", info->line, retval);
+		}
+	}
+	return 0;
+}
+
+/*
+ * cy_break() --- routine which turns the break handling on or off
+ */
+static int cy_break(struct tty_struct *tty, int break_state)
+{
+	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_card *card;
+	unsigned long flags;
+	int retval = 0;
+
+	if (serial_paranoia_check(info, tty->name, "cy_break"))
+		return -EINVAL;
+
+	card = info->card;
+
+	spin_lock_irqsave(&card->card_lock, flags);
+	if (!cy_is_Z(card)) {
+		/* Let the transmit ISR take care of this (since it
+		   requires stuffing characters into the output stream).
+		 */
+		if (break_state == -1) {
+			if (!info->breakon) {
+				info->breakon = 1;
+				if (!info->xmit_cnt) {
+					spin_unlock_irqrestore(&card->card_lock, flags);
+					start_xmit(info);
+					spin_lock_irqsave(&card->card_lock, flags);
+				}
+			}
+		} else {
+			if (!info->breakoff) {
+				info->breakoff = 1;
+				if (!info->xmit_cnt) {
+					spin_unlock_irqrestore(&card->card_lock, flags);
+					start_xmit(info);
+					spin_lock_irqsave(&card->card_lock, flags);
+				}
+			}
+		}
+	} else {
+		if (break_state == -1) {
+			retval = cyz_issue_cmd(card,
+				info->line - card->first_line,
+				C_CM_SET_BREAK, 0L);
+			if (retval != 0) {
+				printk(KERN_ERR "cyc:cy_break (set) retval on "
+					"ttyC%d was %x\n", info->line, retval);
+			}
+		} else {
+			retval = cyz_issue_cmd(card,
+				info->line - card->first_line,
+				C_CM_CLR_BREAK, 0L);
+			if (retval != 0) {
+				printk(KERN_DEBUG "cyc:cy_break (clr) retval "
+					"on ttyC%d was %x\n", info->line,
+					retval);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&card->card_lock, flags);
+	return retval;
+}				/* cy_break */
+
+static int set_threshold(struct cyclades_port *info, unsigned long value)
+{
+	struct cyclades_card *card = info->card;
+	unsigned long flags;
+
+	if (!cy_is_Z(card)) {
+		info->cor3 &= ~CyREC_FIFO;
+		info->cor3 |= value & CyREC_FIFO;
+
+		spin_lock_irqsave(&card->card_lock, flags);
+		cyy_writeb(info, CyCOR3, info->cor3);
+		cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR3ch);
+		spin_unlock_irqrestore(&card->card_lock, flags);
+	}
+	return 0;
+}				/* set_threshold */
+
+static int get_threshold(struct cyclades_port *info,
+						unsigned long __user *value)
+{
+	struct cyclades_card *card = info->card;
+
+	if (!cy_is_Z(card)) {
+		u8 tmp = cyy_readb(info, CyCOR3) & CyREC_FIFO;
+		return put_user(tmp, value);
+	}
+	return 0;
+}				/* get_threshold */
+
+static int set_timeout(struct cyclades_port *info, unsigned long value)
+{
+	struct cyclades_card *card = info->card;
+	unsigned long flags;
+
+	if (!cy_is_Z(card)) {
+		spin_lock_irqsave(&card->card_lock, flags);
+		cyy_writeb(info, CyRTPR, value & 0xff);
+		spin_unlock_irqrestore(&card->card_lock, flags);
+	}
+	return 0;
+}				/* set_timeout */
+
+static int get_timeout(struct cyclades_port *info,
+						unsigned long __user *value)
+{
+	struct cyclades_card *card = info->card;
+
+	if (!cy_is_Z(card)) {
+		u8 tmp = cyy_readb(info, CyRTPR);
+		return put_user(tmp, value);
+	}
+	return 0;
+}				/* get_timeout */
+
+static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg,
+		struct cyclades_icount *cprev)
+{
+	struct cyclades_icount cnow;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&info->card->card_lock, flags);
+	cnow = info->icount;	/* atomic copy */
+	spin_unlock_irqrestore(&info->card->card_lock, flags);
+
+	ret =	((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
+		((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
+		((arg & TIOCM_CD)  && (cnow.dcd != cprev->dcd)) ||
+		((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
+
+	*cprev = cnow;
+
+	return ret;
+}
+
+/*
+ * This routine allows the tty driver to implement device-
+ * specific ioctl's.  If the ioctl number passed in cmd is
+ * not recognized by the driver, it should return ENOIOCTLCMD.
+ */
+static int
+cy_ioctl(struct tty_struct *tty,
+	 unsigned int cmd, unsigned long arg)
+{
+	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_icount cnow;	/* kernel counter temps */
+	int ret_val = 0;
+	unsigned long flags;
+	void __user *argp = (void __user *)arg;
+
+	if (serial_paranoia_check(info, tty->name, "cy_ioctl"))
+		return -ENODEV;
+
+#ifdef CY_DEBUG_OTHER
+	printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
+		info->line, cmd, arg);
+#endif
+
+	switch (cmd) {
+	case CYGETMON:
+		if (copy_to_user(argp, &info->mon, sizeof(info->mon))) {
+			ret_val = -EFAULT;
+			break;
+		}
+		memset(&info->mon, 0, sizeof(info->mon));
+		break;
+	case CYGETTHRESH:
+		ret_val = get_threshold(info, argp);
+		break;
+	case CYSETTHRESH:
+		ret_val = set_threshold(info, arg);
+		break;
+	case CYGETDEFTHRESH:
+		ret_val = put_user(info->default_threshold,
+				(unsigned long __user *)argp);
+		break;
+	case CYSETDEFTHRESH:
+		info->default_threshold = arg & 0x0f;
+		break;
+	case CYGETTIMEOUT:
+		ret_val = get_timeout(info, argp);
+		break;
+	case CYSETTIMEOUT:
+		ret_val = set_timeout(info, arg);
+		break;
+	case CYGETDEFTIMEOUT:
+		ret_val = put_user(info->default_timeout,
+				(unsigned long __user *)argp);
+		break;
+	case CYSETDEFTIMEOUT:
+		info->default_timeout = arg & 0xff;
+		break;
+	case CYSETRFLOW:
+		info->rflow = (int)arg;
+		break;
+	case CYGETRFLOW:
+		ret_val = info->rflow;
+		break;
+	case CYSETRTSDTR_INV:
+		info->rtsdtr_inv = (int)arg;
+		break;
+	case CYGETRTSDTR_INV:
+		ret_val = info->rtsdtr_inv;
+		break;
+	case CYGETCD1400VER:
+		ret_val = info->chip_rev;
+		break;
+#ifndef CONFIG_CYZ_INTR
+	case CYZSETPOLLCYCLE:
+		cyz_polling_cycle = (arg * HZ) / 1000;
+		break;
+	case CYZGETPOLLCYCLE:
+		ret_val = (cyz_polling_cycle * 1000) / HZ;
+		break;
+#endif				/* CONFIG_CYZ_INTR */
+	case CYSETWAIT:
+		info->port.closing_wait = (unsigned short)arg * HZ / 100;
+		break;
+	case CYGETWAIT:
+		ret_val = info->port.closing_wait / (HZ / 100);
+		break;
+	case TIOCGSERIAL:
+		ret_val = cy_get_serial_info(info, argp);
+		break;
+	case TIOCSSERIAL:
+		ret_val = cy_set_serial_info(info, tty, argp);
+		break;
+	case TIOCSERGETLSR:	/* Get line status register */
+		ret_val = get_lsr_info(info, argp);
+		break;
+		/*
+		 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+		 * - mask passed in arg for lines of interest
+		 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+		 * Caller should use TIOCGICOUNT to see which one it was
+		 */
+	case TIOCMIWAIT:
+		spin_lock_irqsave(&info->card->card_lock, flags);
+		/* note the counters on entry */
+		cnow = info->icount;
+		spin_unlock_irqrestore(&info->card->card_lock, flags);
+		ret_val = wait_event_interruptible(info->port.delta_msr_wait,
+				cy_cflags_changed(info, arg, &cnow));
+		break;
+
+		/*
+		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+		 * Return: write counters to the user passed counter struct
+		 * NB: both 1->0 and 0->1 transitions are counted except for
+		 *     RI where only 0->1 is counted.
+		 */
+	default:
+		ret_val = -ENOIOCTLCMD;
+	}
+
+#ifdef CY_DEBUG_OTHER
+	printk(KERN_DEBUG "cyc:cy_ioctl done\n");
+#endif
+	return ret_val;
+}				/* cy_ioctl */
+
+static int cy_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *sic)
+{
+	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_icount cnow;	/* Used to snapshot */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->card->card_lock, flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->card->card_lock, flags);
+
+	sic->cts = cnow.cts;
+	sic->dsr = cnow.dsr;
+	sic->rng = cnow.rng;
+	sic->dcd = cnow.dcd;
+	sic->rx = cnow.rx;
+	sic->tx = cnow.tx;
+	sic->frame = cnow.frame;
+	sic->overrun = cnow.overrun;
+	sic->parity = cnow.parity;
+	sic->brk = cnow.brk;
+	sic->buf_overrun = cnow.buf_overrun;
+	return 0;
+}
+
+/*
+ * This routine allows the tty driver to be notified when
+ * device's termios settings have changed.  Note that a
+ * well-designed tty driver should be prepared to accept the case
+ * where old == NULL, and try to do something rational.
+ */
+static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+	struct cyclades_port *info = tty->driver_data;
+
+#ifdef CY_DEBUG_OTHER
+	printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line);
+#endif
+
+	cy_set_line_char(info, tty);
+
+	if ((old_termios->c_cflag & CRTSCTS) &&
+			!(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		cy_start(tty);
+	}
+#if 0
+	/*
+	 * No need to wake up processes in open wait, since they
+	 * sample the CLOCAL flag once, and don't recheck it.
+	 * XXX  It's not clear whether the current behavior is correct
+	 * or not.  Hence, this may change.....
+	 */
+	if (!(old_termios->c_cflag & CLOCAL) &&
+	    (tty->termios->c_cflag & CLOCAL))
+		wake_up_interruptible(&info->port.open_wait);
+#endif
+}				/* cy_set_termios */
+
+/* This function is used to send a high-priority XON/XOFF character to
+   the device.
+*/
+static void cy_send_xchar(struct tty_struct *tty, char ch)
+{
+	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_card *card;
+	int channel;
+
+	if (serial_paranoia_check(info, tty->name, "cy_send_xchar"))
+		return;
+
+	info->x_char = ch;
+
+	if (ch)
+		cy_start(tty);
+
+	card = info->card;
+	channel = info->line - card->first_line;
+
+	if (cy_is_Z(card)) {
+		if (ch == STOP_CHAR(tty))
+			cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L);
+		else if (ch == START_CHAR(tty))
+			cyz_issue_cmd(card, channel, C_CM_SENDXON, 0L);
+	}
+}
+
+/* This routine is called by the upper-layer tty layer to signal
+   that incoming characters should be throttled because the input
+   buffers are close to full.
+ */
+static void cy_throttle(struct tty_struct *tty)
+{
+	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_card *card;
+	unsigned long flags;
+
+#ifdef CY_DEBUG_THROTTLE
+	char buf[64];
+
+	printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf),
+			tty->ldisc.chars_in_buffer(tty), info->line);
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "cy_throttle"))
+		return;
+
+	card = info->card;
+
+	if (I_IXOFF(tty)) {
+		if (!cy_is_Z(card))
+			cy_send_xchar(tty, STOP_CHAR(tty));
+		else
+			info->throttle = 1;
+	}
+
+	if (tty->termios->c_cflag & CRTSCTS) {
+		if (!cy_is_Z(card)) {
+			spin_lock_irqsave(&card->card_lock, flags);
+			cyy_change_rts_dtr(info, 0, TIOCM_RTS);
+			spin_unlock_irqrestore(&card->card_lock, flags);
+		} else {
+			info->throttle = 1;
+		}
+	}
+}				/* cy_throttle */
+
+/*
+ * This routine notifies the tty driver that it should signal
+ * that characters can now be sent to the tty without fear of
+ * overrunning the input buffers of the line disciplines.
+ */
+static void cy_unthrottle(struct tty_struct *tty)
+{
+	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_card *card;
+	unsigned long flags;
+
+#ifdef CY_DEBUG_THROTTLE
+	char buf[64];
+
+	printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n",
+		tty_name(tty, buf), tty_chars_in_buffer(tty), info->line);
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "cy_unthrottle"))
+		return;
+
+	if (I_IXOFF(tty)) {
+		if (info->x_char)
+			info->x_char = 0;
+		else
+			cy_send_xchar(tty, START_CHAR(tty));
+	}
+
+	if (tty->termios->c_cflag & CRTSCTS) {
+		card = info->card;
+		if (!cy_is_Z(card)) {
+			spin_lock_irqsave(&card->card_lock, flags);
+			cyy_change_rts_dtr(info, TIOCM_RTS, 0);
+			spin_unlock_irqrestore(&card->card_lock, flags);
+		} else {
+			info->throttle = 0;
+		}
+	}
+}				/* cy_unthrottle */
+
+/* cy_start and cy_stop provide software output flow control as a
+   function of XON/XOFF, software CTS, and other such stuff.
+*/
+static void cy_stop(struct tty_struct *tty)
+{
+	struct cyclades_card *cinfo;
+	struct cyclades_port *info = tty->driver_data;
+	int channel;
+	unsigned long flags;
+
+#ifdef CY_DEBUG_OTHER
+	printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line);
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "cy_stop"))
+		return;
+
+	cinfo = info->card;
+	channel = info->line - cinfo->first_line;
+	if (!cy_is_Z(cinfo)) {
+		spin_lock_irqsave(&cinfo->card_lock, flags);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
+		spin_unlock_irqrestore(&cinfo->card_lock, flags);
+	}
+}				/* cy_stop */
+
+static void cy_start(struct tty_struct *tty)
+{
+	struct cyclades_card *cinfo;
+	struct cyclades_port *info = tty->driver_data;
+	int channel;
+	unsigned long flags;
+
+#ifdef CY_DEBUG_OTHER
+	printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line);
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "cy_start"))
+		return;
+
+	cinfo = info->card;
+	channel = info->line - cinfo->first_line;
+	if (!cy_is_Z(cinfo)) {
+		spin_lock_irqsave(&cinfo->card_lock, flags);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
+		spin_unlock_irqrestore(&cinfo->card_lock, flags);
+	}
+}				/* cy_start */
+
+/*
+ * cy_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+static void cy_hangup(struct tty_struct *tty)
+{
+	struct cyclades_port *info = tty->driver_data;
+
+#ifdef CY_DEBUG_OTHER
+	printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line);
+#endif
+
+	if (serial_paranoia_check(info, tty->name, "cy_hangup"))
+		return;
+
+	cy_flush_buffer(tty);
+	cy_shutdown(info, tty);
+	tty_port_hangup(&info->port);
+}				/* cy_hangup */
+
+static int cyy_carrier_raised(struct tty_port *port)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	unsigned long flags;
+	int channel = info->line - cinfo->first_line;
+	u32 cd;
+
+	spin_lock_irqsave(&cinfo->card_lock, flags);
+	cyy_writeb(info, CyCAR, channel & 0x03);
+	cd = cyy_readb(info, CyMSVR1) & CyDCD;
+	spin_unlock_irqrestore(&cinfo->card_lock, flags);
+
+	return cd;
+}
+
+static void cyy_dtr_rts(struct tty_port *port, int raise)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cinfo->card_lock, flags);
+	cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0,
+			raise ? 0 : TIOCM_RTS | TIOCM_DTR);
+	spin_unlock_irqrestore(&cinfo->card_lock, flags);
+}
+
+static int cyz_carrier_raised(struct tty_port *port)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+
+	return readl(&info->u.cyz.ch_ctrl->rs_status) & C_RS_DCD;
+}
+
+static void cyz_dtr_rts(struct tty_port *port, int raise)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+	int ret, channel = info->line - cinfo->first_line;
+	u32 rs;
+
+	rs = readl(&ch_ctrl->rs_control);
+	if (raise)
+		rs |= C_RS_RTS | C_RS_DTR;
+	else
+		rs &= ~(C_RS_RTS | C_RS_DTR);
+	cy_writel(&ch_ctrl->rs_control, rs);
+	ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L);
+	if (ret != 0)
+		printk(KERN_ERR "%s: retval on ttyC%d was %x\n",
+				__func__, info->line, ret);
+#ifdef CY_DEBUG_DTR
+	printk(KERN_DEBUG "%s: raising Z DTR\n", __func__);
+#endif
+}
+
+static const struct tty_port_operations cyy_port_ops = {
+	.carrier_raised = cyy_carrier_raised,
+	.dtr_rts = cyy_dtr_rts,
+	.shutdown = cy_do_close,
+};
+
+static const struct tty_port_operations cyz_port_ops = {
+	.carrier_raised = cyz_carrier_raised,
+	.dtr_rts = cyz_dtr_rts,
+	.shutdown = cy_do_close,
+};
+
+/*
+ * ---------------------------------------------------------------------
+ * cy_init() and friends
+ *
+ * cy_init() is called at boot-time to initialize the serial driver.
+ * ---------------------------------------------------------------------
+ */
+
+static int __devinit cy_init_card(struct cyclades_card *cinfo)
+{
+	struct cyclades_port *info;
+	unsigned int channel, port;
+
+	spin_lock_init(&cinfo->card_lock);
+	cinfo->intr_enabled = 0;
+
+	cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports),
+			GFP_KERNEL);
+	if (cinfo->ports == NULL) {
+		printk(KERN_ERR "Cyclades: cannot allocate ports\n");
+		return -ENOMEM;
+	}
+
+	for (channel = 0, port = cinfo->first_line; channel < cinfo->nports;
+			channel++, port++) {
+		info = &cinfo->ports[channel];
+		tty_port_init(&info->port);
+		info->magic = CYCLADES_MAGIC;
+		info->card = cinfo;
+		info->line = port;
+
+		info->port.closing_wait = CLOSING_WAIT_DELAY;
+		info->port.close_delay = 5 * HZ / 10;
+		info->port.flags = STD_COM_FLAGS;
+		init_completion(&info->shutdown_wait);
+
+		if (cy_is_Z(cinfo)) {
+			struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS;
+			struct ZFW_CTRL *zfw_ctrl;
+
+			info->port.ops = &cyz_port_ops;
+			info->type = PORT_STARTECH;
+
+			zfw_ctrl = cinfo->base_addr +
+				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
+			info->u.cyz.ch_ctrl = &zfw_ctrl->ch_ctrl[channel];
+			info->u.cyz.buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
+
+			if (cinfo->hw_ver == ZO_V1)
+				info->xmit_fifo_size = CYZ_FIFO_SIZE;
+			else
+				info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE;
+#ifdef CONFIG_CYZ_INTR
+			setup_timer(&cyz_rx_full_timer[port],
+				cyz_rx_restart, (unsigned long)info);
+#endif
+		} else {
+			unsigned short chip_number;
+			int index = cinfo->bus_index;
+
+			info->port.ops = &cyy_port_ops;
+			info->type = PORT_CIRRUS;
+			info->xmit_fifo_size = CyMAX_CHAR_FIFO;
+			info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
+			info->cor2 = CyETC;
+			info->cor3 = 0x08;	/* _very_ small rcv threshold */
+
+			chip_number = channel / CyPORTS_PER_CHIP;
+			info->u.cyy.base_addr = cinfo->base_addr +
+				(cy_chip_offset[chip_number] << index);
+			info->chip_rev = cyy_readb(info, CyGFRCR);
+
+			if (info->chip_rev >= CD1400_REV_J) {
+				/* It is a CD1400 rev. J or later */
+				info->tbpr = baud_bpr_60[13];	/* Tx BPR */
+				info->tco = baud_co_60[13];	/* Tx CO */
+				info->rbpr = baud_bpr_60[13];	/* Rx BPR */
+				info->rco = baud_co_60[13];	/* Rx CO */
+				info->rtsdtr_inv = 1;
+			} else {
+				info->tbpr = baud_bpr_25[13];	/* Tx BPR */
+				info->tco = baud_co_25[13];	/* Tx CO */
+				info->rbpr = baud_bpr_25[13];	/* Rx BPR */
+				info->rco = baud_co_25[13];	/* Rx CO */
+				info->rtsdtr_inv = 0;
+			}
+			info->read_status_mask = CyTIMEOUT | CySPECHAR |
+				CyBREAK | CyPARITY | CyFRAME | CyOVERRUN;
+		}
+
+	}
+
+#ifndef CONFIG_CYZ_INTR
+	if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) {
+		mod_timer(&cyz_timerlist, jiffies + 1);
+#ifdef CY_PCI_DEBUG
+		printk(KERN_DEBUG "Cyclades-Z polling initialized\n");
+#endif
+	}
+#endif
+	return 0;
+}
+
+/* initialize chips on Cyclom-Y card -- return number of valid
+   chips (which is number of ports/4) */
+static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr,
+		int index)
+{
+	unsigned int chip_number;
+	void __iomem *base_addr;
+
+	cy_writeb(true_base_addr + (Cy_HwReset << index), 0);
+	/* Cy_HwReset is 0x1400 */
+	cy_writeb(true_base_addr + (Cy_ClrIntr << index), 0);
+	/* Cy_ClrIntr is 0x1800 */
+	udelay(500L);
+
+	for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD;
+							chip_number++) {
+		base_addr =
+		    true_base_addr + (cy_chip_offset[chip_number] << index);
+		mdelay(1);
+		if (readb(base_addr + (CyCCR << index)) != 0x00) {
+			/*************
+			printk(" chip #%d at %#6lx is never idle (CCR != 0)\n",
+			chip_number, (unsigned long)base_addr);
+			*************/
+			return chip_number;
+		}
+
+		cy_writeb(base_addr + (CyGFRCR << index), 0);
+		udelay(10L);
+
+		/* The Cyclom-16Y does not decode address bit 9 and therefore
+		   cannot distinguish between references to chip 0 and a non-
+		   existent chip 4.  If the preceding clearing of the supposed
+		   chip 4 GFRCR register appears at chip 0, there is no chip 4
+		   and this must be a Cyclom-16Y, not a Cyclom-32Ye.
+		 */
+		if (chip_number == 4 && readb(true_base_addr +
+				(cy_chip_offset[0] << index) +
+				(CyGFRCR << index)) == 0) {
+			return chip_number;
+		}
+
+		cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET);
+		mdelay(1);
+
+		if (readb(base_addr + (CyGFRCR << index)) == 0x00) {
+			/*
+			   printk(" chip #%d at %#6lx is not responding ",
+			   chip_number, (unsigned long)base_addr);
+			   printk("(GFRCR stayed 0)\n",
+			 */
+			return chip_number;
+		}
+		if ((0xf0 & (readb(base_addr + (CyGFRCR << index)))) !=
+				0x40) {
+			/*
+			printk(" chip #%d at %#6lx is not valid (GFRCR == "
+					"%#2x)\n",
+					chip_number, (unsigned long)base_addr,
+					base_addr[CyGFRCR<<index]);
+			 */
+			return chip_number;
+		}
+		cy_writeb(base_addr + (CyGCR << index), CyCH0_SERIAL);
+		if (readb(base_addr + (CyGFRCR << index)) >= CD1400_REV_J) {
+			/* It is a CD1400 rev. J or later */
+			/* Impossible to reach 5ms with this chip.
+			   Changed to 2ms instead (f = 500 Hz). */
+			cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS);
+		} else {
+			/* f = 200 Hz */
+			cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS);
+		}
+
+		/*
+		   printk(" chip #%d at %#6lx is rev 0x%2x\n",
+		   chip_number, (unsigned long)base_addr,
+		   readb(base_addr+(CyGFRCR<<index)));
+		 */
+	}
+	return chip_number;
+}				/* cyy_init_card */
+
+/*
+ * ---------------------------------------------------------------------
+ * cy_detect_isa() - Probe for Cyclom-Y/ISA boards.
+ * sets global variables and return the number of ISA boards found.
+ * ---------------------------------------------------------------------
+ */
+static int __init cy_detect_isa(void)
+{
+#ifdef CONFIG_ISA
+	unsigned short cy_isa_irq, nboard;
+	void __iomem *cy_isa_address;
+	unsigned short i, j, cy_isa_nchan;
+	int isparam = 0;
+
+	nboard = 0;
+
+	/* Check for module parameters */
+	for (i = 0; i < NR_CARDS; i++) {
+		if (maddr[i] || i) {
+			isparam = 1;
+			cy_isa_addresses[i] = maddr[i];
+		}
+		if (!maddr[i])
+			break;
+	}
+
+	/* scan the address table probing for Cyclom-Y/ISA boards */
+	for (i = 0; i < NR_ISA_ADDRS; i++) {
+		unsigned int isa_address = cy_isa_addresses[i];
+		if (isa_address == 0x0000)
+			return nboard;
+
+		/* probe for CD1400... */
+		cy_isa_address = ioremap_nocache(isa_address, CyISA_Ywin);
+		if (cy_isa_address == NULL) {
+			printk(KERN_ERR "Cyclom-Y/ISA: can't remap base "
+					"address\n");
+			continue;
+		}
+		cy_isa_nchan = CyPORTS_PER_CHIP *
+			cyy_init_card(cy_isa_address, 0);
+		if (cy_isa_nchan == 0) {
+			iounmap(cy_isa_address);
+			continue;
+		}
+
+		if (isparam && i < NR_CARDS && irq[i])
+			cy_isa_irq = irq[i];
+		else
+			/* find out the board's irq by probing */
+			cy_isa_irq = detect_isa_irq(cy_isa_address);
+		if (cy_isa_irq == 0) {
+			printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but the "
+				"IRQ could not be detected.\n",
+				(unsigned long)cy_isa_address);
+			iounmap(cy_isa_address);
+			continue;
+		}
+
+		if ((cy_next_channel + cy_isa_nchan) > NR_PORTS) {
+			printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no "
+				"more channels are available. Change NR_PORTS "
+				"in cyclades.c and recompile kernel.\n",
+				(unsigned long)cy_isa_address);
+			iounmap(cy_isa_address);
+			return nboard;
+		}
+		/* fill the next cy_card structure available */
+		for (j = 0; j < NR_CARDS; j++) {
+			if (cy_card[j].base_addr == NULL)
+				break;
+		}
+		if (j == NR_CARDS) {	/* no more cy_cards available */
+			printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no "
+				"more cards can be used. Change NR_CARDS in "
+				"cyclades.c and recompile kernel.\n",
+				(unsigned long)cy_isa_address);
+			iounmap(cy_isa_address);
+			return nboard;
+		}
+
+		/* allocate IRQ */
+		if (request_irq(cy_isa_irq, cyy_interrupt,
+				IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) {
+			printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but "
+				"could not allocate IRQ#%d.\n",
+				(unsigned long)cy_isa_address, cy_isa_irq);
+			iounmap(cy_isa_address);
+			return nboard;
+		}
+
+		/* set cy_card */
+		cy_card[j].base_addr = cy_isa_address;
+		cy_card[j].ctl_addr.p9050 = NULL;
+		cy_card[j].irq = (int)cy_isa_irq;
+		cy_card[j].bus_index = 0;
+		cy_card[j].first_line = cy_next_channel;
+		cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
+		cy_card[j].nports = cy_isa_nchan;
+		if (cy_init_card(&cy_card[j])) {
+			cy_card[j].base_addr = NULL;
+			free_irq(cy_isa_irq, &cy_card[j]);
+			iounmap(cy_isa_address);
+			continue;
+		}
+		nboard++;
+
+		printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: "
+			"%d channels starting from port %d\n",
+			j + 1, (unsigned long)cy_isa_address,
+			(unsigned long)(cy_isa_address + (CyISA_Ywin - 1)),
+			cy_isa_irq, cy_isa_nchan, cy_next_channel);
+
+		for (j = cy_next_channel;
+				j < cy_next_channel + cy_isa_nchan; j++)
+			tty_register_device(cy_serial_driver, j, NULL);
+		cy_next_channel += cy_isa_nchan;
+	}
+	return nboard;
+#else
+	return 0;
+#endif				/* CONFIG_ISA */
+}				/* cy_detect_isa */
+
+#ifdef CONFIG_PCI
+static inline int __devinit cyc_isfwstr(const char *str, unsigned int size)
+{
+	unsigned int a;
+
+	for (a = 0; a < size && *str; a++, str++)
+		if (*str & 0x80)
+			return -EINVAL;
+
+	for (; a < size; a++, str++)
+		if (*str)
+			return -EINVAL;
+
+	return 0;
+}
+
+static inline void __devinit cyz_fpga_copy(void __iomem *fpga, const u8 *data,
+		unsigned int size)
+{
+	for (; size > 0; size--) {
+		cy_writel(fpga, *data++);
+		udelay(10);
+	}
+}
+
+static void __devinit plx_init(struct pci_dev *pdev, int irq,
+		struct RUNTIME_9060 __iomem *addr)
+{
+	/* Reset PLX */
+	cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x40000000);
+	udelay(100L);
+	cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x40000000);
+
+	/* Reload Config. Registers from EEPROM */
+	cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x20000000);
+	udelay(100L);
+	cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x20000000);
+
+	/* For some yet unknown reason, once the PLX9060 reloads the EEPROM,
+	 * the IRQ is lost and, thus, we have to re-write it to the PCI config.
+	 * registers. This will remain here until we find a permanent fix.
+	 */
+	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq);
+}
+
+static int __devinit __cyz_load_fw(const struct firmware *fw,
+		const char *name, const u32 mailbox, void __iomem *base,
+		void __iomem *fpga)
+{
+	const void *ptr = fw->data;
+	const struct zfile_header *h = ptr;
+	const struct zfile_config *c, *cs;
+	const struct zfile_block *b, *bs;
+	unsigned int a, tmp, len = fw->size;
+#define BAD_FW KERN_ERR "Bad firmware: "
+	if (len < sizeof(*h)) {
+		printk(BAD_FW "too short: %u<%zu\n", len, sizeof(*h));
+		return -EINVAL;
+	}
+
+	cs = ptr + h->config_offset;
+	bs = ptr + h->block_offset;
+
+	if ((void *)(cs + h->n_config) > ptr + len ||
+			(void *)(bs + h->n_blocks) > ptr + len) {
+		printk(BAD_FW "too short");
+		return  -EINVAL;
+	}
+
+	if (cyc_isfwstr(h->name, sizeof(h->name)) ||
+			cyc_isfwstr(h->date, sizeof(h->date))) {
+		printk(BAD_FW "bad formatted header string\n");
+		return -EINVAL;
+	}
+
+	if (strncmp(name, h->name, sizeof(h->name))) {
+		printk(BAD_FW "bad name '%s' (expected '%s')\n", h->name, name);
+		return -EINVAL;
+	}
+
+	tmp = 0;
+	for (c = cs; c < cs + h->n_config; c++) {
+		for (a = 0; a < c->n_blocks; a++)
+			if (c->block_list[a] > h->n_blocks) {
+				printk(BAD_FW "bad block ref number in cfgs\n");
+				return -EINVAL;
+			}
+		if (c->mailbox == mailbox && c->function == 0) /* 0 is normal */
+			tmp++;
+	}
+	if (!tmp) {
+		printk(BAD_FW "nothing appropriate\n");
+		return -EINVAL;
+	}
+
+	for (b = bs; b < bs + h->n_blocks; b++)
+		if (b->file_offset + b->size > len) {
+			printk(BAD_FW "bad block data offset\n");
+			return -EINVAL;
+		}
+
+	/* everything is OK, let's seek'n'load it */
+	for (c = cs; c < cs + h->n_config; c++)
+		if (c->mailbox == mailbox && c->function == 0)
+			break;
+
+	for (a = 0; a < c->n_blocks; a++) {
+		b = &bs[c->block_list[a]];
+		if (b->type == ZBLOCK_FPGA) {
+			if (fpga != NULL)
+				cyz_fpga_copy(fpga, ptr + b->file_offset,
+						b->size);
+		} else {
+			if (base != NULL)
+				memcpy_toio(base + b->ram_offset,
+					       ptr + b->file_offset, b->size);
+		}
+	}
+#undef BAD_FW
+	return 0;
+}
+
+static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
+		struct RUNTIME_9060 __iomem *ctl_addr, int irq)
+{
+	const struct firmware *fw;
+	struct FIRM_ID __iomem *fid = base_addr + ID_ADDRESS;
+	struct CUSTOM_REG __iomem *cust = base_addr;
+	struct ZFW_CTRL __iomem *pt_zfwctrl;
+	void __iomem *tmp;
+	u32 mailbox, status, nchan;
+	unsigned int i;
+	int retval;
+
+	retval = request_firmware(&fw, "cyzfirm.bin", &pdev->dev);
+	if (retval) {
+		dev_err(&pdev->dev, "can't get firmware\n");
+		goto err;
+	}
+
+	/* Check whether the firmware is already loaded and running. If
+	   positive, skip this board */
+	if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) {
+		u32 cntval = readl(base_addr + 0x190);
+
+		udelay(100);
+		if (cntval != readl(base_addr + 0x190)) {
+			/* FW counter is working, FW is running */
+			dev_dbg(&pdev->dev, "Cyclades-Z FW already loaded. "
+					"Skipping board.\n");
+			retval = 0;
+			goto err_rel;
+		}
+	}
+
+	/* start boot */
+	cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) &
+			~0x00030800UL);
+
+	mailbox = readl(&ctl_addr->mail_box_0);
+
+	if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) {
+		/* stops CPU and set window to beginning of RAM */
+		cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
+		cy_writel(&cust->cpu_stop, 0);
+		cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
+		udelay(100);
+	}
+
+	plx_init(pdev, irq, ctl_addr);
+
+	if (mailbox != 0) {
+		/* load FPGA */
+		retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, NULL,
+				base_addr);
+		if (retval)
+			goto err_rel;
+		if (!__cyz_fpga_loaded(ctl_addr)) {
+			dev_err(&pdev->dev, "fw upload successful, but fw is "
+					"not loaded\n");
+			goto err_rel;
+		}
+	}
+
+	/* stops CPU and set window to beginning of RAM */
+	cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
+	cy_writel(&cust->cpu_stop, 0);
+	cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
+	udelay(100);
+
+	/* clear memory */
+	for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++)
+		cy_writeb(tmp, 255);
+	if (mailbox != 0) {
+		/* set window to last 512K of RAM */
+		cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE);
+		for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++)
+			cy_writeb(tmp, 255);
+		/* set window to beginning of RAM */
+		cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
+	}
+
+	retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL);
+	release_firmware(fw);
+	if (retval)
+		goto err;
+
+	/* finish boot and start boards */
+	cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
+	cy_writel(&cust->cpu_start, 0);
+	cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
+	i = 0;
+	while ((status = readl(&fid->signature)) != ZFIRM_ID && i++ < 40)
+		msleep(100);
+	if (status != ZFIRM_ID) {
+		if (status == ZFIRM_HLT) {
+			dev_err(&pdev->dev, "you need an external power supply "
+				"for this number of ports. Firmware halted and "
+				"board reset.\n");
+			retval = -EIO;
+			goto err;
+		}
+		dev_warn(&pdev->dev, "fid->signature = 0x%x... Waiting "
+				"some more time\n", status);
+		while ((status = readl(&fid->signature)) != ZFIRM_ID &&
+				i++ < 200)
+			msleep(100);
+		if (status != ZFIRM_ID) {
+			dev_err(&pdev->dev, "Board not started in 20 seconds! "
+					"Giving up. (fid->signature = 0x%x)\n",
+					status);
+			dev_info(&pdev->dev, "*** Warning ***: if you are "
+				"upgrading the FW, please power cycle the "
+				"system before loading the new FW to the "
+				"Cyclades-Z.\n");
+
+			if (__cyz_fpga_loaded(ctl_addr))
+				plx_init(pdev, irq, ctl_addr);
+
+			retval = -EIO;
+			goto err;
+		}
+		dev_dbg(&pdev->dev, "Firmware started after %d seconds.\n",
+				i / 10);
+	}
+	pt_zfwctrl = base_addr + readl(&fid->zfwctrl_addr);
+
+	dev_dbg(&pdev->dev, "fid=> %p, zfwctrl_addr=> %x, npt_zfwctrl=> %p\n",
+			base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr),
+			base_addr + readl(&fid->zfwctrl_addr));
+
+	nchan = readl(&pt_zfwctrl->board_ctrl.n_channel);
+	dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n",
+		readl(&pt_zfwctrl->board_ctrl.fw_version), nchan);
+
+	if (nchan == 0) {
+		dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please "
+			"check the connection between the Z host card and the "
+			"serial expanders.\n");
+
+		if (__cyz_fpga_loaded(ctl_addr))
+			plx_init(pdev, irq, ctl_addr);
+
+		dev_info(&pdev->dev, "Null number of ports detected. Board "
+				"reset.\n");
+		retval = 0;
+		goto err;
+	}
+
+	cy_writel(&pt_zfwctrl->board_ctrl.op_system, C_OS_LINUX);
+	cy_writel(&pt_zfwctrl->board_ctrl.dr_version, DRIVER_VERSION);
+
+	/*
+	   Early firmware failed to start looking for commands.
+	   This enables firmware interrupts for those commands.
+	 */
+	cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
+			(1 << 17));
+	cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
+			0x00030800UL);
+
+	return nchan;
+err_rel:
+	release_firmware(fw);
+err:
+	return retval;
+}
+
+static int __devinit cy_pci_probe(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+	void __iomem *addr0 = NULL, *addr2 = NULL;
+	char *card_name = NULL;
+	u32 uninitialized_var(mailbox);
+	unsigned int device_id, nchan = 0, card_no, i;
+	unsigned char plx_ver;
+	int retval, irq;
+
+	retval = pci_enable_device(pdev);
+	if (retval) {
+		dev_err(&pdev->dev, "cannot enable device\n");
+		goto err;
+	}
+
+	/* read PCI configuration area */
+	irq = pdev->irq;
+	device_id = pdev->device & ~PCI_DEVICE_ID_MASK;
+
+#if defined(__alpha__)
+	if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) {	/* below 1M? */
+		dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low "
+			"addresses on Alpha systems.\n");
+		retval = -EIO;
+		goto err_dis;
+	}
+#endif
+	if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) {
+		dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low "
+			"addresses\n");
+		retval = -EIO;
+		goto err_dis;
+	}
+
+	if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
+		dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring "
+				"it...\n");
+		pdev->resource[2].flags &= ~IORESOURCE_IO;
+	}
+
+	retval = pci_request_regions(pdev, "cyclades");
+	if (retval) {
+		dev_err(&pdev->dev, "failed to reserve resources\n");
+		goto err_dis;
+	}
+
+	retval = -EIO;
+	if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
+			device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
+		card_name = "Cyclom-Y";
+
+		addr0 = ioremap_nocache(pci_resource_start(pdev, 0),
+				CyPCI_Yctl);
+		if (addr0 == NULL) {
+			dev_err(&pdev->dev, "can't remap ctl region\n");
+			goto err_reg;
+		}
+		addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
+				CyPCI_Ywin);
+		if (addr2 == NULL) {
+			dev_err(&pdev->dev, "can't remap base region\n");
+			goto err_unmap;
+		}
+
+		nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1);
+		if (nchan == 0) {
+			dev_err(&pdev->dev, "Cyclom-Y PCI host card with no "
+					"Serial-Modules\n");
+			goto err_unmap;
+		}
+	} else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) {
+		struct RUNTIME_9060 __iomem *ctl_addr;
+
+		ctl_addr = addr0 = ioremap_nocache(pci_resource_start(pdev, 0),
+				CyPCI_Zctl);
+		if (addr0 == NULL) {
+			dev_err(&pdev->dev, "can't remap ctl region\n");
+			goto err_reg;
+		}
+
+		/* Disable interrupts on the PLX before resetting it */
+		cy_writew(&ctl_addr->intr_ctrl_stat,
+				readw(&ctl_addr->intr_ctrl_stat) & ~0x0900);
+
+		plx_init(pdev, irq, addr0);
+
+		mailbox = readl(&ctl_addr->mail_box_0);
+
+		addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
+				mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin);
+		if (addr2 == NULL) {
+			dev_err(&pdev->dev, "can't remap base region\n");
+			goto err_unmap;
+		}
+
+		if (mailbox == ZE_V1) {
+			card_name = "Cyclades-Ze";
+		} else {
+			card_name = "Cyclades-8Zo";
+#ifdef CY_PCI_DEBUG
+			if (mailbox == ZO_V1) {
+				cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
+				dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA "
+					"id %lx, ver %lx\n", (ulong)(0xff &
+					readl(&((struct CUSTOM_REG *)addr2)->
+						fpga_id)), (ulong)(0xff &
+					readl(&((struct CUSTOM_REG *)addr2)->
+						fpga_version)));
+				cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
+			} else {
+				dev_info(&pdev->dev, "Cyclades-Z/PCI: New "
+					"Cyclades-Z board.  FPGA not loaded\n");
+			}
+#endif
+			/* The following clears the firmware id word.  This
+			   ensures that the driver will not attempt to talk to
+			   the board until it has been properly initialized.
+			 */
+			if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
+				cy_writel(addr2 + ID_ADDRESS, 0L);
+		}
+
+		retval = cyz_load_fw(pdev, addr2, addr0, irq);
+		if (retval <= 0)
+			goto err_unmap;
+		nchan = retval;
+	}
+
+	if ((cy_next_channel + nchan) > NR_PORTS) {
+		dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no "
+			"channels are available. Change NR_PORTS in "
+			"cyclades.c and recompile kernel.\n");
+		goto err_unmap;
+	}
+	/* fill the next cy_card structure available */
+	for (card_no = 0; card_no < NR_CARDS; card_no++) {
+		if (cy_card[card_no].base_addr == NULL)
+			break;
+	}
+	if (card_no == NR_CARDS) {	/* no more cy_cards available */
+		dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no "
+			"more cards can be used. Change NR_CARDS in "
+			"cyclades.c and recompile kernel.\n");
+		goto err_unmap;
+	}
+
+	if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
+			device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
+		/* allocate IRQ */
+		retval = request_irq(irq, cyy_interrupt,
+				IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]);
+		if (retval) {
+			dev_err(&pdev->dev, "could not allocate IRQ\n");
+			goto err_unmap;
+		}
+		cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
+	} else {
+		struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS;
+		struct ZFW_CTRL __iomem *zfw_ctrl;
+
+		zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
+
+		cy_card[card_no].hw_ver = mailbox;
+		cy_card[card_no].num_chips = (unsigned int)-1;
+		cy_card[card_no].board_ctrl = &zfw_ctrl->board_ctrl;
+#ifdef CONFIG_CYZ_INTR
+		/* allocate IRQ only if board has an IRQ */
+		if (irq != 0 && irq != 255) {
+			retval = request_irq(irq, cyz_interrupt,
+					IRQF_SHARED, "Cyclades-Z",
+					&cy_card[card_no]);
+			if (retval) {
+				dev_err(&pdev->dev, "could not allocate IRQ\n");
+				goto err_unmap;
+			}
+		}
+#endif				/* CONFIG_CYZ_INTR */
+	}
+
+	/* set cy_card */
+	cy_card[card_no].base_addr = addr2;
+	cy_card[card_no].ctl_addr.p9050 = addr0;
+	cy_card[card_no].irq = irq;
+	cy_card[card_no].bus_index = 1;
+	cy_card[card_no].first_line = cy_next_channel;
+	cy_card[card_no].nports = nchan;
+	retval = cy_init_card(&cy_card[card_no]);
+	if (retval)
+		goto err_null;
+
+	pci_set_drvdata(pdev, &cy_card[card_no]);
+
+	if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
+			device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
+		/* enable interrupts in the PCI interface */
+		plx_ver = readb(addr2 + CyPLX_VER) & 0x0f;
+		switch (plx_ver) {
+		case PLX_9050:
+			cy_writeb(addr0 + 0x4c, 0x43);
+			break;
+
+		case PLX_9060:
+		case PLX_9080:
+		default:	/* Old boards, use PLX_9060 */
+		{
+			struct RUNTIME_9060 __iomem *ctl_addr = addr0;
+			plx_init(pdev, irq, ctl_addr);
+			cy_writew(&ctl_addr->intr_ctrl_stat,
+				readw(&ctl_addr->intr_ctrl_stat) | 0x0900);
+			break;
+		}
+		}
+	}
+
+	dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from "
+		"port %d.\n", card_name, card_no + 1, nchan, cy_next_channel);
+	for (i = cy_next_channel; i < cy_next_channel + nchan; i++)
+		tty_register_device(cy_serial_driver, i, &pdev->dev);
+	cy_next_channel += nchan;
+
+	return 0;
+err_null:
+	cy_card[card_no].base_addr = NULL;
+	free_irq(irq, &cy_card[card_no]);
+err_unmap:
+	iounmap(addr0);
+	if (addr2)
+		iounmap(addr2);
+err_reg:
+	pci_release_regions(pdev);
+err_dis:
+	pci_disable_device(pdev);
+err:
+	return retval;
+}
+
+static void __devexit cy_pci_remove(struct pci_dev *pdev)
+{
+	struct cyclades_card *cinfo = pci_get_drvdata(pdev);
+	unsigned int i;
+
+	/* non-Z with old PLX */
+	if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
+			PLX_9050)
+		cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0);
+	else
+#ifndef CONFIG_CYZ_INTR
+		if (!cy_is_Z(cinfo))
+#endif
+		cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat,
+			readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) &
+			~0x0900);
+
+	iounmap(cinfo->base_addr);
+	if (cinfo->ctl_addr.p9050)
+		iounmap(cinfo->ctl_addr.p9050);
+	if (cinfo->irq
+#ifndef CONFIG_CYZ_INTR
+		&& !cy_is_Z(cinfo)
+#endif /* CONFIG_CYZ_INTR */
+		)
+		free_irq(cinfo->irq, cinfo);
+	pci_release_regions(pdev);
+
+	cinfo->base_addr = NULL;
+	for (i = cinfo->first_line; i < cinfo->first_line +
+			cinfo->nports; i++)
+		tty_unregister_device(cy_serial_driver, i);
+	cinfo->nports = 0;
+	kfree(cinfo->ports);
+}
+
+static struct pci_driver cy_pci_driver = {
+	.name = "cyclades",
+	.id_table = cy_pci_dev_id,
+	.probe = cy_pci_probe,
+	.remove = __devexit_p(cy_pci_remove)
+};
+#endif
+
+static int cyclades_proc_show(struct seq_file *m, void *v)
+{
+	struct cyclades_port *info;
+	unsigned int i, j;
+	__u32 cur_jifs = jiffies;
+
+	seq_puts(m, "Dev TimeOpen   BytesOut  IdleOut    BytesIn   "
+			"IdleIn  Overruns  Ldisc\n");
+
+	/* Output one line for each known port */
+	for (i = 0; i < NR_CARDS; i++)
+		for (j = 0; j < cy_card[i].nports; j++) {
+			info = &cy_card[i].ports[j];
+
+			if (info->port.count) {
+				/* XXX is the ldisc num worth this? */
+				struct tty_struct *tty;
+				struct tty_ldisc *ld;
+				int num = 0;
+				tty = tty_port_tty_get(&info->port);
+				if (tty) {
+					ld = tty_ldisc_ref(tty);
+					if (ld) {
+						num = ld->ops->num;
+						tty_ldisc_deref(ld);
+					}
+					tty_kref_put(tty);
+				}
+				seq_printf(m, "%3d %8lu %10lu %8lu "
+					"%10lu %8lu %9lu %6d\n", info->line,
+					(cur_jifs - info->idle_stats.in_use) /
+					HZ, info->idle_stats.xmit_bytes,
+					(cur_jifs - info->idle_stats.xmit_idle)/
+					HZ, info->idle_stats.recv_bytes,
+					(cur_jifs - info->idle_stats.recv_idle)/
+					HZ, info->idle_stats.overruns,
+					num);
+			} else
+				seq_printf(m, "%3d %8lu %10lu %8lu "
+					"%10lu %8lu %9lu %6ld\n",
+					info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
+		}
+	return 0;
+}
+
+static int cyclades_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cyclades_proc_show, NULL);
+}
+
+static const struct file_operations cyclades_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cyclades_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/* The serial driver boot-time initialization code!
+    Hardware I/O ports are mapped to character special devices on a
+    first found, first allocated manner.  That is, this code searches
+    for Cyclom cards in the system.  As each is found, it is probed
+    to discover how many chips (and thus how many ports) are present.
+    These ports are mapped to the tty ports 32 and upward in monotonic
+    fashion.  If an 8-port card is replaced with a 16-port card, the
+    port mapping on a following card will shift.
+
+    This approach is different from what is used in the other serial
+    device driver because the Cyclom is more properly a multiplexer,
+    not just an aggregation of serial ports on one card.
+
+    If there are more cards with more ports than have been
+    statically allocated above, a warning is printed and the
+    extra ports are ignored.
+ */
+
+static const struct tty_operations cy_ops = {
+	.open = cy_open,
+	.close = cy_close,
+	.write = cy_write,
+	.put_char = cy_put_char,
+	.flush_chars = cy_flush_chars,
+	.write_room = cy_write_room,
+	.chars_in_buffer = cy_chars_in_buffer,
+	.flush_buffer = cy_flush_buffer,
+	.ioctl = cy_ioctl,
+	.throttle = cy_throttle,
+	.unthrottle = cy_unthrottle,
+	.set_termios = cy_set_termios,
+	.stop = cy_stop,
+	.start = cy_start,
+	.hangup = cy_hangup,
+	.break_ctl = cy_break,
+	.wait_until_sent = cy_wait_until_sent,
+	.tiocmget = cy_tiocmget,
+	.tiocmset = cy_tiocmset,
+	.get_icount = cy_get_icount,
+	.proc_fops = &cyclades_proc_fops,
+};
+
+static int __init cy_init(void)
+{
+	unsigned int nboards;
+	int retval = -ENOMEM;
+
+	cy_serial_driver = alloc_tty_driver(NR_PORTS);
+	if (!cy_serial_driver)
+		goto err;
+
+	printk(KERN_INFO "Cyclades driver " CY_VERSION " (built %s %s)\n",
+			__DATE__, __TIME__);
+
+	/* Initialize the tty_driver structure */
+
+	cy_serial_driver->owner = THIS_MODULE;
+	cy_serial_driver->driver_name = "cyclades";
+	cy_serial_driver->name = "ttyC";
+	cy_serial_driver->major = CYCLADES_MAJOR;
+	cy_serial_driver->minor_start = 0;
+	cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	cy_serial_driver->subtype = SERIAL_TYPE_NORMAL;
+	cy_serial_driver->init_termios = tty_std_termios;
+	cy_serial_driver->init_termios.c_cflag =
+	    B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	cy_serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	tty_set_operations(cy_serial_driver, &cy_ops);
+
+	retval = tty_register_driver(cy_serial_driver);
+	if (retval) {
+		printk(KERN_ERR "Couldn't register Cyclades serial driver\n");
+		goto err_frtty;
+	}
+
+	/* the code below is responsible to find the boards. Each different
+	   type of board has its own detection routine. If a board is found,
+	   the next cy_card structure available is set by the detection
+	   routine. These functions are responsible for checking the
+	   availability of cy_card and cy_port data structures and updating
+	   the cy_next_channel. */
+
+	/* look for isa boards */
+	nboards = cy_detect_isa();
+
+#ifdef CONFIG_PCI
+	/* look for pci boards */
+	retval = pci_register_driver(&cy_pci_driver);
+	if (retval && !nboards) {
+		tty_unregister_driver(cy_serial_driver);
+		goto err_frtty;
+	}
+#endif
+
+	return 0;
+err_frtty:
+	put_tty_driver(cy_serial_driver);
+err:
+	return retval;
+}				/* cy_init */
+
+static void __exit cy_cleanup_module(void)
+{
+	struct cyclades_card *card;
+	unsigned int i, e1;
+
+#ifndef CONFIG_CYZ_INTR
+	del_timer_sync(&cyz_timerlist);
+#endif /* CONFIG_CYZ_INTR */
+
+	e1 = tty_unregister_driver(cy_serial_driver);
+	if (e1)
+		printk(KERN_ERR "failed to unregister Cyclades serial "
+				"driver(%d)\n", e1);
+
+#ifdef CONFIG_PCI
+	pci_unregister_driver(&cy_pci_driver);
+#endif
+
+	for (i = 0; i < NR_CARDS; i++) {
+		card = &cy_card[i];
+		if (card->base_addr) {
+			/* clear interrupt */
+			cy_writeb(card->base_addr + Cy_ClrIntr, 0);
+			iounmap(card->base_addr);
+			if (card->ctl_addr.p9050)
+				iounmap(card->ctl_addr.p9050);
+			if (card->irq
+#ifndef CONFIG_CYZ_INTR
+				&& !cy_is_Z(card)
+#endif /* CONFIG_CYZ_INTR */
+				)
+				free_irq(card->irq, card);
+			for (e1 = card->first_line; e1 < card->first_line +
+					card->nports; e1++)
+				tty_unregister_device(cy_serial_driver, e1);
+			kfree(card->ports);
+		}
+	}
+
+	put_tty_driver(cy_serial_driver);
+} /* cy_cleanup_module */
+
+module_init(cy_init);
+module_exit(cy_cleanup_module);
+
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CY_VERSION);
+MODULE_ALIAS_CHARDEV_MAJOR(CYCLADES_MAJOR);
+MODULE_FIRMWARE("cyzfirm.bin");
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
new file mode 100644
index 000000000000..6f2c9809f1fb
--- /dev/null
+++ b/drivers/tty/hvc/Kconfig
@@ -0,0 +1,105 @@
+config HVC_DRIVER
+	bool
+	help
+	  Generic "hypervisor virtual console" infrastructure for various
+	  hypervisors (pSeries, iSeries, Xen, lguest).
+	  It will automatically be selected if one of the back-end console drivers
+	  is selected.
+
+config HVC_IRQ
+	bool
+
+config HVC_CONSOLE
+	bool "pSeries Hypervisor Virtual Console support"
+	depends on PPC_PSERIES
+	select HVC_DRIVER
+	select HVC_IRQ
+	help
+	  pSeries machines when partitioned support a hypervisor virtual
+	  console. This driver allows each pSeries partition to have a console
+	  which is accessed via the HMC.
+
+config HVC_ISERIES
+	bool "iSeries Hypervisor Virtual Console support"
+	depends on PPC_ISERIES
+	default y
+	select HVC_DRIVER
+	select HVC_IRQ
+	select VIOPATH
+	help
+	  iSeries machines support a hypervisor virtual console.
+
+config HVC_RTAS
+	bool "IBM RTAS Console support"
+	depends on PPC_RTAS
+	select HVC_DRIVER
+	help
+	  IBM Console device driver which makes use of RTAS
+
+config HVC_BEAT
+	bool "Toshiba's Beat Hypervisor Console support"
+	depends on PPC_CELLEB
+	select HVC_DRIVER
+	help
+	  Toshiba's Cell Reference Set Beat Console device driver
+
+config HVC_IUCV
+	bool "z/VM IUCV Hypervisor console support (VM only)"
+	depends on S390
+	select HVC_DRIVER
+	select IUCV
+	default y
+	help
+	  This driver provides a Hypervisor console (HVC) back-end to access
+	  a Linux (console) terminal via a z/VM IUCV communication path.
+
+config HVC_XEN
+	bool "Xen Hypervisor Console support"
+	depends on XEN
+	select HVC_DRIVER
+	select HVC_IRQ
+	default y
+	help
+	  Xen virtual console device driver
+
+config HVC_UDBG
+       bool "udbg based fake hypervisor console"
+       depends on PPC && EXPERIMENTAL
+       select HVC_DRIVER
+       default n
+
+config HVC_DCC
+       bool "ARM JTAG DCC console"
+       depends on ARM
+       select HVC_DRIVER
+       help
+         This console uses the JTAG DCC on ARM to create a console under the HVC
+	 driver. This console is used through a JTAG only on ARM. If you don't have
+	 a JTAG then you probably don't want this option.
+
+config HVC_BFIN_JTAG
+	bool "Blackfin JTAG console"
+	depends on BLACKFIN
+	select HVC_DRIVER
+	help
+	 This console uses the Blackfin JTAG to create a console under the
+	 the HVC driver.  If you don't have JTAG, then you probably don't
+	 want this option.
+
+config HVCS
+	tristate "IBM Hypervisor Virtual Console Server support"
+	depends on PPC_PSERIES && HVC_CONSOLE
+	help
+	  Partitionable IBM Power5 ppc64 machines allow hosting of
+	  firmware virtual consoles from one Linux partition by
+	  another Linux partition.  This driver allows console data
+	  from Linux partitions to be accessed through TTY device
+	  interfaces in the device tree of a Linux partition running
+	  this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hvcs.  Additionally, this module
+	  will depend on arch specific APIs exported from hvcserver.ko
+	  which will also be compiled when this driver is built as a
+	  module.
+
diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile
index d79e7e9bf9d2..40a25d93fe52 100644
--- a/drivers/tty/hvc/Makefile
+++ b/drivers/tty/hvc/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
 obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
 obj-$(CONFIG_HVC_IUCV)		+= hvc_iucv.o
 obj-$(CONFIG_HVC_UDBG)		+= hvc_udbg.o
+obj-$(CONFIG_HVC_BFIN_JTAG)	+= hvc_bfin_jtag.o
 obj-$(CONFIG_HVCS)		+= hvcs.o
diff --git a/drivers/tty/hvc/hvc_bfin_jtag.c b/drivers/tty/hvc/hvc_bfin_jtag.c
new file mode 100644
index 000000000000..31d6cc6a77af
--- /dev/null
+++ b/drivers/tty/hvc/hvc_bfin_jtag.c
@@ -0,0 +1,105 @@
+/*
+ * Console via Blackfin JTAG Communication
+ *
+ * Copyright 2008-2011 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include "hvc_console.h"
+
+/* See the Debug/Emulation chapter in the HRM */
+#define EMUDOF   0x00000001	/* EMUDAT_OUT full & valid */
+#define EMUDIF   0x00000002	/* EMUDAT_IN full & valid */
+#define EMUDOOVF 0x00000004	/* EMUDAT_OUT overflow */
+#define EMUDIOVF 0x00000008	/* EMUDAT_IN overflow */
+
+/* Helper functions to glue the register API to simple C operations */
+static inline uint32_t bfin_write_emudat(uint32_t emudat)
+{
+	__asm__ __volatile__("emudat = %0;" : : "d"(emudat));
+	return emudat;
+}
+
+static inline uint32_t bfin_read_emudat(void)
+{
+	uint32_t emudat;
+	__asm__ __volatile__("%0 = emudat;" : "=d"(emudat));
+	return emudat;
+}
+
+/* Send data to the host */
+static int hvc_bfin_put_chars(uint32_t vt, const char *buf, int count)
+{
+	static uint32_t outbound_len;
+	uint32_t emudat;
+	int ret;
+
+	if (bfin_read_DBGSTAT() & EMUDOF)
+		return 0;
+
+	if (!outbound_len) {
+		outbound_len = count;
+		bfin_write_emudat(outbound_len);
+		return 0;
+	}
+
+	ret = min(outbound_len, (uint32_t)4);
+	memcpy(&emudat, buf, ret);
+	bfin_write_emudat(emudat);
+	outbound_len -= ret;
+
+	return ret;
+}
+
+/* Receive data from the host */
+static int hvc_bfin_get_chars(uint32_t vt, char *buf, int count)
+{
+	static uint32_t inbound_len;
+	uint32_t emudat;
+	int ret;
+
+	if (!(bfin_read_DBGSTAT() & EMUDIF))
+		return 0;
+	emudat = bfin_read_emudat();
+
+	if (!inbound_len) {
+		inbound_len = emudat;
+		return 0;
+	}
+
+	ret = min(inbound_len, (uint32_t)4);
+	memcpy(buf, &emudat, ret);
+	inbound_len -= ret;
+
+	return ret;
+}
+
+/* Glue the HVC layers to the Blackfin layers */
+static const struct hv_ops hvc_bfin_get_put_ops = {
+	.get_chars = hvc_bfin_get_chars,
+	.put_chars = hvc_bfin_put_chars,
+};
+
+static int __init hvc_bfin_console_init(void)
+{
+	hvc_instantiate(0, 0, &hvc_bfin_get_put_ops);
+	return 0;
+}
+console_initcall(hvc_bfin_console_init);
+
+static int __init hvc_bfin_init(void)
+{
+	hvc_alloc(0, 0, &hvc_bfin_get_put_ops, 128);
+	return 0;
+}
+device_initcall(hvc_bfin_init);
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 6470f63deb4b..435f6facbc23 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -33,54 +33,29 @@
 static inline u32 __dcc_getstatus(void)
 {
 	u32 __ret;
-
-	asm("mrc p14, 0, %0, c0, c1, 0	@ read comms ctrl reg"
+	asm volatile("mrc p14, 0, %0, c0, c1, 0	@ read comms ctrl reg"
 		: "=r" (__ret) : : "cc");
 
 	return __ret;
 }
 
 
-#if defined(CONFIG_CPU_V7)
 static inline char __dcc_getchar(void)
 {
 	char __c;
 
-	asm("get_wait:	mrc p14, 0, pc, c0, c1, 0                          \n\
-			bne get_wait                                       \n\
-			mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
-		: "=r" (__c) : : "cc");
-
-	return __c;
-}
-#else
-static inline char __dcc_getchar(void)
-{
-	char __c;
-
-	asm("mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
+	asm volatile("mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
 		: "=r" (__c));
 
 	return __c;
 }
-#endif
 
-#if defined(CONFIG_CPU_V7)
-static inline void __dcc_putchar(char c)
-{
-	asm("put_wait:	mrc p14, 0, pc, c0, c1, 0                 \n\
-			bcs put_wait                              \n\
-			mcr p14, 0, %0, c0, c5, 0                   "
-	: : "r" (c) : "cc");
-}
-#else
 static inline void __dcc_putchar(char c)
 {
-	asm("mcr p14, 0, %0, c0, c5, 0	@ write a char"
+	asm volatile("mcr p14, 0, %0, c0, c5, 0	@ write a char"
 		: /* no output register */
 		: "r" (c));
 }
-#endif
 
 static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
 {
@@ -90,7 +65,7 @@ static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
 		while (__dcc_getstatus() & DCC_STATUS_TX)
 			cpu_relax();
 
-		__dcc_putchar((char)(buf[i] & 0xFF));
+		__dcc_putchar(buf[i]);
 	}
 
 	return count;
@@ -100,15 +75,11 @@ static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count)
 {
 	int i;
 
-	for (i = 0; i < count; ++i) {
-		int c = -1;
-
+	for (i = 0; i < count; ++i)
 		if (__dcc_getstatus() & DCC_STATUS_RX)
-			c = __dcc_getchar();
-		if (c < 0)
+			buf[i] = __dcc_getchar();
+		else
 			break;
-		buf[i] = c;
-	}
 
 	return i;
 }
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 67a75a502c01..8a8d6373f164 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1095,7 +1095,7 @@ static void hvsi_unthrottle(struct tty_struct *tty)
 	h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
 }
 
-static int hvsi_tiocmget(struct tty_struct *tty, struct file *file)
+static int hvsi_tiocmget(struct tty_struct *tty)
 {
 	struct hvsi_struct *hp = tty->driver_data;
 
@@ -1103,8 +1103,8 @@ static int hvsi_tiocmget(struct tty_struct *tty, struct file *file)
 	return hp->mctrl;
 }
 
-static int hvsi_tiocmset(struct tty_struct *tty, struct file *file,
-		unsigned int set, unsigned int clear)
+static int hvsi_tiocmset(struct tty_struct *tty,
+				unsigned int set, unsigned int clear)
 {
 	struct hvsi_struct *hp = tty->driver_data;
 	unsigned long flags;
diff --git a/drivers/tty/ipwireless/Makefile b/drivers/tty/ipwireless/Makefile
new file mode 100644
index 000000000000..db80873d7f20
--- /dev/null
+++ b/drivers/tty/ipwireless/Makefile
@@ -0,0 +1,10 @@
+#
+# drivers/char/pcmcia/ipwireless/Makefile
+#
+# Makefile for the IPWireless driver
+#
+
+obj-$(CONFIG_IPWIRELESS) += ipwireless.o
+
+ipwireless-y := hardware.o main.o network.o tty.o
+
diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c
new file mode 100644
index 000000000000..0aeb5a38d296
--- /dev/null
+++ b/drivers/tty/ipwireless/hardware.c
@@ -0,0 +1,1764 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ *   by Stephen Blackheath <stephen@blacksapphire.com>,
+ *      Ben Martel <benm@symmetric.co.nz>
+ *
+ * Copyrighted as follows:
+ *   Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ *   Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ *   Copyright (C) 2007 David Sterba
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+
+#include "hardware.h"
+#include "setup_protocol.h"
+#include "network.h"
+#include "main.h"
+
+static void ipw_send_setup_packet(struct ipw_hardware *hw);
+static void handle_received_SETUP_packet(struct ipw_hardware *ipw,
+					 unsigned int address,
+					 const unsigned char *data, int len,
+					 int is_last);
+static void ipwireless_setup_timer(unsigned long data);
+static void handle_received_CTRL_packet(struct ipw_hardware *hw,
+		unsigned int channel_idx, const unsigned char *data, int len);
+
+/*#define TIMING_DIAGNOSTICS*/
+
+#ifdef TIMING_DIAGNOSTICS
+
+static struct timing_stats {
+	unsigned long last_report_time;
+	unsigned long read_time;
+	unsigned long write_time;
+	unsigned long read_bytes;
+	unsigned long write_bytes;
+	unsigned long start_time;
+};
+
+static void start_timing(void)
+{
+	timing_stats.start_time = jiffies;
+}
+
+static void end_read_timing(unsigned length)
+{
+	timing_stats.read_time += (jiffies - start_time);
+	timing_stats.read_bytes += length + 2;
+	report_timing();
+}
+
+static void end_write_timing(unsigned length)
+{
+	timing_stats.write_time += (jiffies - start_time);
+	timing_stats.write_bytes += length + 2;
+	report_timing();
+}
+
+static void report_timing(void)
+{
+	unsigned long since = jiffies - timing_stats.last_report_time;
+
+	/* If it's been more than one second... */
+	if (since >= HZ) {
+		int first = (timing_stats.last_report_time == 0);
+
+		timing_stats.last_report_time = jiffies;
+		if (!first)
+			printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+			       ": %u us elapsed - read %lu bytes in %u us, wrote %lu bytes in %u us\n",
+			       jiffies_to_usecs(since),
+			       timing_stats.read_bytes,
+			       jiffies_to_usecs(timing_stats.read_time),
+			       timing_stats.write_bytes,
+			       jiffies_to_usecs(timing_stats.write_time));
+
+		timing_stats.read_time = 0;
+		timing_stats.write_time = 0;
+		timing_stats.read_bytes = 0;
+		timing_stats.write_bytes = 0;
+	}
+}
+#else
+static void start_timing(void) { }
+static void end_read_timing(unsigned length) { }
+static void end_write_timing(unsigned length) { }
+#endif
+
+/* Imported IPW definitions */
+
+#define LL_MTU_V1 318
+#define LL_MTU_V2 250
+#define LL_MTU_MAX (LL_MTU_V1 > LL_MTU_V2 ? LL_MTU_V1 : LL_MTU_V2)
+
+#define PRIO_DATA  2
+#define PRIO_CTRL  1
+#define PRIO_SETUP 0
+
+/* Addresses */
+#define ADDR_SETUP_PROT 0
+
+/* Protocol ids */
+enum {
+	/* Identifier for the Com Data protocol */
+	TL_PROTOCOLID_COM_DATA = 0,
+
+	/* Identifier for the Com Control protocol */
+	TL_PROTOCOLID_COM_CTRL = 1,
+
+	/* Identifier for the Setup protocol */
+	TL_PROTOCOLID_SETUP = 2
+};
+
+/* Number of bytes in NL packet header (cannot do
+ * sizeof(nl_packet_header) since it's a bitfield) */
+#define NL_FIRST_PACKET_HEADER_SIZE        3
+
+/* Number of bytes in NL packet header (cannot do
+ * sizeof(nl_packet_header) since it's a bitfield) */
+#define NL_FOLLOWING_PACKET_HEADER_SIZE    1
+
+struct nl_first_packet_header {
+	unsigned char protocol:3;
+	unsigned char address:3;
+	unsigned char packet_rank:2;
+	unsigned char length_lsb;
+	unsigned char length_msb;
+};
+
+struct nl_packet_header {
+	unsigned char protocol:3;
+	unsigned char address:3;
+	unsigned char packet_rank:2;
+};
+
+/* Value of 'packet_rank' above */
+#define NL_INTERMEDIATE_PACKET    0x0
+#define NL_LAST_PACKET            0x1
+#define NL_FIRST_PACKET           0x2
+
+union nl_packet {
+	/* Network packet header of the first packet (a special case) */
+	struct nl_first_packet_header hdr_first;
+	/* Network packet header of the following packets (if any) */
+	struct nl_packet_header hdr;
+	/* Complete network packet (header + data) */
+	unsigned char rawpkt[LL_MTU_MAX];
+} __attribute__ ((__packed__));
+
+#define HW_VERSION_UNKNOWN -1
+#define HW_VERSION_1 1
+#define HW_VERSION_2 2
+
+/* IPW I/O ports */
+#define IOIER 0x00		/* Interrupt Enable Register */
+#define IOIR  0x02		/* Interrupt Source/ACK register */
+#define IODCR 0x04		/* Data Control Register */
+#define IODRR 0x06		/* Data Read Register */
+#define IODWR 0x08		/* Data Write Register */
+#define IOESR 0x0A		/* Embedded Driver Status Register */
+#define IORXR 0x0C		/* Rx Fifo Register (Host to Embedded) */
+#define IOTXR 0x0E		/* Tx Fifo Register (Embedded to Host) */
+
+/* I/O ports and bit definitions for version 1 of the hardware */
+
+/* IER bits*/
+#define IER_RXENABLED   0x1
+#define IER_TXENABLED   0x2
+
+/* ISR bits */
+#define IR_RXINTR       0x1
+#define IR_TXINTR       0x2
+
+/* DCR bits */
+#define DCR_RXDONE      0x1
+#define DCR_TXDONE      0x2
+#define DCR_RXRESET     0x4
+#define DCR_TXRESET     0x8
+
+/* I/O ports and bit definitions for version 2 of the hardware */
+
+struct MEMCCR {
+	unsigned short reg_config_option;	/* PCCOR: Configuration Option Register */
+	unsigned short reg_config_and_status;	/* PCCSR: Configuration and Status Register */
+	unsigned short reg_pin_replacement;	/* PCPRR: Pin Replacemant Register */
+	unsigned short reg_socket_and_copy;	/* PCSCR: Socket and Copy Register */
+	unsigned short reg_ext_status;		/* PCESR: Extendend Status Register */
+	unsigned short reg_io_base;		/* PCIOB: I/O Base Register */
+};
+
+struct MEMINFREG {
+	unsigned short memreg_tx_old;	/* TX Register (R/W) */
+	unsigned short pad1;
+	unsigned short memreg_rx_done;	/* RXDone Register (R/W) */
+	unsigned short pad2;
+	unsigned short memreg_rx;	/* RX Register (R/W) */
+	unsigned short pad3;
+	unsigned short memreg_pc_interrupt_ack;	/* PC intr Ack Register (W) */
+	unsigned short pad4;
+	unsigned long memreg_card_present;/* Mask for Host to check (R) for
+					   * CARD_PRESENT_VALUE */
+	unsigned short memreg_tx_new;	/* TX2 (new) Register (R/W) */
+};
+
+#define CARD_PRESENT_VALUE (0xBEEFCAFEUL)
+
+#define MEMTX_TX                       0x0001
+#define MEMRX_RX                       0x0001
+#define MEMRX_RX_DONE                  0x0001
+#define MEMRX_PCINTACKK                0x0001
+
+#define NL_NUM_OF_PRIORITIES       3
+#define NL_NUM_OF_PROTOCOLS        3
+#define NL_NUM_OF_ADDRESSES        NO_OF_IPW_CHANNELS
+
+struct ipw_hardware {
+	unsigned int base_port;
+	short hw_version;
+	unsigned short ll_mtu;
+	spinlock_t lock;
+
+	int initializing;
+	int init_loops;
+	struct timer_list setup_timer;
+
+	/* Flag if hw is ready to send next packet */
+	int tx_ready;
+	/* Count of pending packets to be sent */
+	int tx_queued;
+	struct list_head tx_queue[NL_NUM_OF_PRIORITIES];
+
+	int rx_bytes_queued;
+	struct list_head rx_queue;
+	/* Pool of rx_packet structures that are not currently used. */
+	struct list_head rx_pool;
+	int rx_pool_size;
+	/* True if reception of data is blocked while userspace processes it. */
+	int blocking_rx;
+	/* True if there is RX data ready on the hardware. */
+	int rx_ready;
+	unsigned short last_memtx_serial;
+	/*
+	 * Newer versions of the V2 card firmware send serial numbers in the
+	 * MemTX register. 'serial_number_detected' is set true when we detect
+	 * a non-zero serial number (indicating the new firmware).  Thereafter,
+	 * the driver can safely ignore the Timer Recovery re-sends to avoid
+	 * out-of-sync problems.
+	 */
+	int serial_number_detected;
+	struct work_struct work_rx;
+
+	/* True if we are to send the set-up data to the hardware. */
+	int to_setup;
+
+	/* Card has been removed */
+	int removed;
+	/* Saved irq value when we disable the interrupt. */
+	int irq;
+	/* True if this driver is shutting down. */
+	int shutting_down;
+	/* Modem control lines */
+	unsigned int control_lines[NL_NUM_OF_ADDRESSES];
+	struct ipw_rx_packet *packet_assembler[NL_NUM_OF_ADDRESSES];
+
+	struct tasklet_struct tasklet;
+
+	/* The handle for the network layer, for the sending of events to it. */
+	struct ipw_network *network;
+	struct MEMINFREG __iomem *memory_info_regs;
+	struct MEMCCR __iomem *memregs_CCR;
+	void (*reboot_callback) (void *data);
+	void *reboot_callback_data;
+
+	unsigned short __iomem *memreg_tx;
+};
+
+/*
+ * Packet info structure for tx packets.
+ * Note: not all the fields defined here are required for all protocols
+ */
+struct ipw_tx_packet {
+	struct list_head queue;
+	/* channel idx + 1 */
+	unsigned char dest_addr;
+	/* SETUP, CTRL or DATA */
+	unsigned char protocol;
+	/* Length of data block, which starts at the end of this structure */
+	unsigned short length;
+	/* Sending state */
+	/* Offset of where we've sent up to so far */
+	unsigned long offset;
+	/* Count of packet fragments, starting at 0 */
+	int fragment_count;
+
+	/* Called after packet is sent and before is freed */
+	void (*packet_callback) (void *cb_data, unsigned int packet_length);
+	void *callback_data;
+};
+
+/* Signals from DTE */
+#define COMCTRL_RTS	0
+#define COMCTRL_DTR	1
+
+/* Signals from DCE */
+#define COMCTRL_CTS	2
+#define COMCTRL_DCD	3
+#define COMCTRL_DSR	4
+#define COMCTRL_RI	5
+
+struct ipw_control_packet_body {
+	/* DTE signal or DCE signal */
+	unsigned char sig_no;
+	/* 0: set signal, 1: clear signal */
+	unsigned char value;
+} __attribute__ ((__packed__));
+
+struct ipw_control_packet {
+	struct ipw_tx_packet header;
+	struct ipw_control_packet_body body;
+};
+
+struct ipw_rx_packet {
+	struct list_head queue;
+	unsigned int capacity;
+	unsigned int length;
+	unsigned int protocol;
+	unsigned int channel_idx;
+};
+
+static char *data_type(const unsigned char *buf, unsigned length)
+{
+	struct nl_packet_header *hdr = (struct nl_packet_header *) buf;
+
+	if (length == 0)
+		return "     ";
+
+	if (hdr->packet_rank & NL_FIRST_PACKET) {
+		switch (hdr->protocol) {
+		case TL_PROTOCOLID_COM_DATA:	return "DATA ";
+		case TL_PROTOCOLID_COM_CTRL:	return "CTRL ";
+		case TL_PROTOCOLID_SETUP:	return "SETUP";
+		default: return "???? ";
+		}
+	} else
+		return "     ";
+}
+
+#define DUMP_MAX_BYTES 64
+
+static void dump_data_bytes(const char *type, const unsigned char *data,
+			    unsigned length)
+{
+	char prefix[56];
+
+	sprintf(prefix, IPWIRELESS_PCCARD_NAME ": %s %s ",
+			type, data_type(data, length));
+	print_hex_dump_bytes(prefix, 0, (void *)data,
+			length < DUMP_MAX_BYTES ? length : DUMP_MAX_BYTES);
+}
+
+static void swap_packet_bitfield_to_le(unsigned char *data)
+{
+#ifdef __BIG_ENDIAN_BITFIELD
+	unsigned char tmp = *data, ret = 0;
+
+	/*
+	 * transform bits from aa.bbb.ccc to ccc.bbb.aa
+	 */
+	ret |= tmp & 0xc0 >> 6;
+	ret |= tmp & 0x38 >> 1;
+	ret |= tmp & 0x07 << 5;
+	*data = ret & 0xff;
+#endif
+}
+
+static void swap_packet_bitfield_from_le(unsigned char *data)
+{
+#ifdef __BIG_ENDIAN_BITFIELD
+	unsigned char tmp = *data, ret = 0;
+
+	/*
+	 * transform bits from ccc.bbb.aa to aa.bbb.ccc
+	 */
+	ret |= tmp & 0xe0 >> 5;
+	ret |= tmp & 0x1c << 1;
+	ret |= tmp & 0x03 << 6;
+	*data = ret & 0xff;
+#endif
+}
+
+static void do_send_fragment(struct ipw_hardware *hw, unsigned char *data,
+			    unsigned length)
+{
+	unsigned i;
+	unsigned long flags;
+
+	start_timing();
+	BUG_ON(length > hw->ll_mtu);
+
+	if (ipwireless_debug)
+		dump_data_bytes("send", data, length);
+
+	spin_lock_irqsave(&hw->lock, flags);
+
+	hw->tx_ready = 0;
+	swap_packet_bitfield_to_le(data);
+
+	if (hw->hw_version == HW_VERSION_1) {
+		outw((unsigned short) length, hw->base_port + IODWR);
+
+		for (i = 0; i < length; i += 2) {
+			unsigned short d = data[i];
+			__le16 raw_data;
+
+			if (i + 1 < length)
+				d |= data[i + 1] << 8;
+			raw_data = cpu_to_le16(d);
+			outw(raw_data, hw->base_port + IODWR);
+		}
+
+		outw(DCR_TXDONE, hw->base_port + IODCR);
+	} else if (hw->hw_version == HW_VERSION_2) {
+		outw((unsigned short) length, hw->base_port);
+
+		for (i = 0; i < length; i += 2) {
+			unsigned short d = data[i];
+			__le16 raw_data;
+
+			if (i + 1 < length)
+				d |= data[i + 1] << 8;
+			raw_data = cpu_to_le16(d);
+			outw(raw_data, hw->base_port);
+		}
+		while ((i & 3) != 2) {
+			outw((unsigned short) 0xDEAD, hw->base_port);
+			i += 2;
+		}
+		writew(MEMRX_RX, &hw->memory_info_regs->memreg_rx);
+	}
+
+	spin_unlock_irqrestore(&hw->lock, flags);
+
+	end_write_timing(length);
+}
+
+static void do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet)
+{
+	unsigned short fragment_data_len;
+	unsigned short data_left = packet->length - packet->offset;
+	unsigned short header_size;
+	union nl_packet pkt;
+
+	header_size =
+	    (packet->fragment_count == 0)
+	    ? NL_FIRST_PACKET_HEADER_SIZE
+	    : NL_FOLLOWING_PACKET_HEADER_SIZE;
+	fragment_data_len = hw->ll_mtu - header_size;
+	if (data_left < fragment_data_len)
+		fragment_data_len = data_left;
+
+	/*
+	 * hdr_first is now in machine bitfield order, which will be swapped
+	 * to le just before it goes to hw
+	 */
+	pkt.hdr_first.protocol = packet->protocol;
+	pkt.hdr_first.address = packet->dest_addr;
+	pkt.hdr_first.packet_rank = 0;
+
+	/* First packet? */
+	if (packet->fragment_count == 0) {
+		pkt.hdr_first.packet_rank |= NL_FIRST_PACKET;
+		pkt.hdr_first.length_lsb = (unsigned char) packet->length;
+		pkt.hdr_first.length_msb =
+			(unsigned char) (packet->length >> 8);
+	}
+
+	memcpy(pkt.rawpkt + header_size,
+	       ((unsigned char *) packet) + sizeof(struct ipw_tx_packet) +
+	       packet->offset, fragment_data_len);
+	packet->offset += fragment_data_len;
+	packet->fragment_count++;
+
+	/* Last packet? (May also be first packet.) */
+	if (packet->offset == packet->length)
+		pkt.hdr_first.packet_rank |= NL_LAST_PACKET;
+	do_send_fragment(hw, pkt.rawpkt, header_size + fragment_data_len);
+
+	/* If this packet has unsent data, then re-queue it. */
+	if (packet->offset < packet->length) {
+		/*
+		 * Re-queue it at the head of the highest priority queue so
+		 * it goes before all other packets
+		 */
+		unsigned long flags;
+
+		spin_lock_irqsave(&hw->lock, flags);
+		list_add(&packet->queue, &hw->tx_queue[0]);
+		hw->tx_queued++;
+		spin_unlock_irqrestore(&hw->lock, flags);
+	} else {
+		if (packet->packet_callback)
+			packet->packet_callback(packet->callback_data,
+					packet->length);
+		kfree(packet);
+	}
+}
+
+static void ipw_setup_hardware(struct ipw_hardware *hw)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	if (hw->hw_version == HW_VERSION_1) {
+		/* Reset RX FIFO */
+		outw(DCR_RXRESET, hw->base_port + IODCR);
+		/* SB: Reset TX FIFO */
+		outw(DCR_TXRESET, hw->base_port + IODCR);
+
+		/* Enable TX and RX interrupts. */
+		outw(IER_TXENABLED | IER_RXENABLED, hw->base_port + IOIER);
+	} else {
+		/*
+		 * Set INTRACK bit (bit 0), which means we must explicitly
+		 * acknowledge interrupts by clearing bit 2 of reg_config_and_status.
+		 */
+		unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status);
+
+		csr |= 1;
+		writew(csr, &hw->memregs_CCR->reg_config_and_status);
+	}
+	spin_unlock_irqrestore(&hw->lock, flags);
+}
+
+/*
+ * If 'packet' is NULL, then this function allocates a new packet, setting its
+ * length to 0 and ensuring it has the specified minimum amount of free space.
+ *
+ * If 'packet' is not NULL, then this function enlarges it if it doesn't
+ * have the specified minimum amount of free space.
+ *
+ */
+static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw,
+					   struct ipw_rx_packet *packet,
+					   int minimum_free_space)
+{
+
+	if (!packet) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&hw->lock, flags);
+		if (!list_empty(&hw->rx_pool)) {
+			packet = list_first_entry(&hw->rx_pool,
+					struct ipw_rx_packet, queue);
+			hw->rx_pool_size--;
+			spin_unlock_irqrestore(&hw->lock, flags);
+			list_del(&packet->queue);
+		} else {
+			const int min_capacity =
+				ipwireless_ppp_mru(hw->network) + 2;
+			int new_capacity;
+
+			spin_unlock_irqrestore(&hw->lock, flags);
+			new_capacity =
+				(minimum_free_space > min_capacity
+				 ? minimum_free_space
+				 : min_capacity);
+			packet = kmalloc(sizeof(struct ipw_rx_packet)
+					+ new_capacity, GFP_ATOMIC);
+			if (!packet)
+				return NULL;
+			packet->capacity = new_capacity;
+		}
+		packet->length = 0;
+	}
+
+	if (packet->length + minimum_free_space > packet->capacity) {
+		struct ipw_rx_packet *old_packet = packet;
+
+		packet = kmalloc(sizeof(struct ipw_rx_packet) +
+				old_packet->length + minimum_free_space,
+				GFP_ATOMIC);
+		if (!packet) {
+			kfree(old_packet);
+			return NULL;
+		}
+		memcpy(packet, old_packet,
+				sizeof(struct ipw_rx_packet)
+					+ old_packet->length);
+		packet->capacity = old_packet->length + minimum_free_space;
+		kfree(old_packet);
+	}
+
+	return packet;
+}
+
+static void pool_free(struct ipw_hardware *hw, struct ipw_rx_packet *packet)
+{
+	if (hw->rx_pool_size > 6)
+		kfree(packet);
+	else {
+		hw->rx_pool_size++;
+		list_add(&packet->queue, &hw->rx_pool);
+	}
+}
+
+static void queue_received_packet(struct ipw_hardware *hw,
+				  unsigned int protocol,
+				  unsigned int address,
+				  const unsigned char *data, int length,
+				  int is_last)
+{
+	unsigned int channel_idx = address - 1;
+	struct ipw_rx_packet *packet = NULL;
+	unsigned long flags;
+
+	/* Discard packet if channel index is out of range. */
+	if (channel_idx >= NL_NUM_OF_ADDRESSES) {
+		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+		       ": data packet has bad address %u\n", address);
+		return;
+	}
+
+	/*
+	 * ->packet_assembler is safe to touch unlocked, this is the only place
+	 */
+	if (protocol == TL_PROTOCOLID_COM_DATA) {
+		struct ipw_rx_packet **assem =
+			&hw->packet_assembler[channel_idx];
+
+		/*
+		 * Create a new packet, or assembler already contains one
+		 * enlarge it by 'length' bytes.
+		 */
+		(*assem) = pool_allocate(hw, *assem, length);
+		if (!(*assem)) {
+			printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+				": no memory for incomming data packet, dropped!\n");
+			return;
+		}
+		(*assem)->protocol = protocol;
+		(*assem)->channel_idx = channel_idx;
+
+		/* Append this packet data onto existing data. */
+		memcpy((unsigned char *)(*assem) +
+			       sizeof(struct ipw_rx_packet)
+				+ (*assem)->length, data, length);
+		(*assem)->length += length;
+		if (is_last) {
+			packet = *assem;
+			*assem = NULL;
+			/* Count queued DATA bytes only */
+			spin_lock_irqsave(&hw->lock, flags);
+			hw->rx_bytes_queued += packet->length;
+			spin_unlock_irqrestore(&hw->lock, flags);
+		}
+	} else {
+		/* If it's a CTRL packet, don't assemble, just queue it. */
+		packet = pool_allocate(hw, NULL, length);
+		if (!packet) {
+			printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+				": no memory for incomming ctrl packet, dropped!\n");
+			return;
+		}
+		packet->protocol = protocol;
+		packet->channel_idx = channel_idx;
+		memcpy((unsigned char *)packet + sizeof(struct ipw_rx_packet),
+				data, length);
+		packet->length = length;
+	}
+
+	/*
+	 * If this is the last packet, then send the assembled packet on to the
+	 * network layer.
+	 */
+	if (packet) {
+		spin_lock_irqsave(&hw->lock, flags);
+		list_add_tail(&packet->queue, &hw->rx_queue);
+		/* Block reception of incoming packets if queue is full. */
+		hw->blocking_rx =
+			(hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE);
+
+		spin_unlock_irqrestore(&hw->lock, flags);
+		schedule_work(&hw->work_rx);
+	}
+}
+
+/*
+ * Workqueue callback
+ */
+static void ipw_receive_data_work(struct work_struct *work_rx)
+{
+	struct ipw_hardware *hw =
+	    container_of(work_rx, struct ipw_hardware, work_rx);
+	unsigned long flags;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	while (!list_empty(&hw->rx_queue)) {
+		struct ipw_rx_packet *packet =
+			list_first_entry(&hw->rx_queue,
+					struct ipw_rx_packet, queue);
+
+		if (hw->shutting_down)
+			break;
+		list_del(&packet->queue);
+
+		/*
+		 * Note: ipwireless_network_packet_received must be called in a
+		 * process context (i.e. via schedule_work) because the tty
+		 * output code can sleep in the tty_flip_buffer_push call.
+		 */
+		if (packet->protocol == TL_PROTOCOLID_COM_DATA) {
+			if (hw->network != NULL) {
+				/* If the network hasn't been disconnected. */
+				spin_unlock_irqrestore(&hw->lock, flags);
+				/*
+				 * This must run unlocked due to tty processing
+				 * and mutex locking
+				 */
+				ipwireless_network_packet_received(
+						hw->network,
+						packet->channel_idx,
+						(unsigned char *)packet
+						+ sizeof(struct ipw_rx_packet),
+						packet->length);
+				spin_lock_irqsave(&hw->lock, flags);
+			}
+			/* Count queued DATA bytes only */
+			hw->rx_bytes_queued -= packet->length;
+		} else {
+			/*
+			 * This is safe to be called locked, callchain does
+			 * not block
+			 */
+			handle_received_CTRL_packet(hw, packet->channel_idx,
+					(unsigned char *)packet
+					+ sizeof(struct ipw_rx_packet),
+					packet->length);
+		}
+		pool_free(hw, packet);
+		/*
+		 * Unblock reception of incoming packets if queue is no longer
+		 * full.
+		 */
+		hw->blocking_rx =
+			hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE;
+		if (hw->shutting_down)
+			break;
+	}
+	spin_unlock_irqrestore(&hw->lock, flags);
+}
+
+static void handle_received_CTRL_packet(struct ipw_hardware *hw,
+					unsigned int channel_idx,
+					const unsigned char *data, int len)
+{
+	const struct ipw_control_packet_body *body =
+		(const struct ipw_control_packet_body *) data;
+	unsigned int changed_mask;
+
+	if (len != sizeof(struct ipw_control_packet_body)) {
+		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+		       ": control packet was %d bytes - wrong size!\n",
+		       len);
+		return;
+	}
+
+	switch (body->sig_no) {
+	case COMCTRL_CTS:
+		changed_mask = IPW_CONTROL_LINE_CTS;
+		break;
+	case COMCTRL_DCD:
+		changed_mask = IPW_CONTROL_LINE_DCD;
+		break;
+	case COMCTRL_DSR:
+		changed_mask = IPW_CONTROL_LINE_DSR;
+		break;
+	case COMCTRL_RI:
+		changed_mask = IPW_CONTROL_LINE_RI;
+		break;
+	default:
+		changed_mask = 0;
+	}
+
+	if (changed_mask != 0) {
+		if (body->value)
+			hw->control_lines[channel_idx] |= changed_mask;
+		else
+			hw->control_lines[channel_idx] &= ~changed_mask;
+		if (hw->network)
+			ipwireless_network_notify_control_line_change(
+					hw->network,
+					channel_idx,
+					hw->control_lines[channel_idx],
+					changed_mask);
+	}
+}
+
+static void handle_received_packet(struct ipw_hardware *hw,
+				   const union nl_packet *packet,
+				   unsigned short len)
+{
+	unsigned int protocol = packet->hdr.protocol;
+	unsigned int address = packet->hdr.address;
+	unsigned int header_length;
+	const unsigned char *data;
+	unsigned int data_len;
+	int is_last = packet->hdr.packet_rank & NL_LAST_PACKET;
+
+	if (packet->hdr.packet_rank & NL_FIRST_PACKET)
+		header_length = NL_FIRST_PACKET_HEADER_SIZE;
+	else
+		header_length = NL_FOLLOWING_PACKET_HEADER_SIZE;
+
+	data = packet->rawpkt + header_length;
+	data_len = len - header_length;
+	switch (protocol) {
+	case TL_PROTOCOLID_COM_DATA:
+	case TL_PROTOCOLID_COM_CTRL:
+		queue_received_packet(hw, protocol, address, data, data_len,
+				is_last);
+		break;
+	case TL_PROTOCOLID_SETUP:
+		handle_received_SETUP_packet(hw, address, data, data_len,
+				is_last);
+		break;
+	}
+}
+
+static void acknowledge_data_read(struct ipw_hardware *hw)
+{
+	if (hw->hw_version == HW_VERSION_1)
+		outw(DCR_RXDONE, hw->base_port + IODCR);
+	else
+		writew(MEMRX_PCINTACKK,
+				&hw->memory_info_regs->memreg_pc_interrupt_ack);
+}
+
+/*
+ * Retrieve a packet from the IPW hardware.
+ */
+static void do_receive_packet(struct ipw_hardware *hw)
+{
+	unsigned len;
+	unsigned i;
+	unsigned char pkt[LL_MTU_MAX];
+
+	start_timing();
+
+	if (hw->hw_version == HW_VERSION_1) {
+		len = inw(hw->base_port + IODRR);
+		if (len > hw->ll_mtu) {
+			printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+			       ": received a packet of %u bytes - longer than the MTU!\n", len);
+			outw(DCR_RXDONE | DCR_RXRESET, hw->base_port + IODCR);
+			return;
+		}
+
+		for (i = 0; i < len; i += 2) {
+			__le16 raw_data = inw(hw->base_port + IODRR);
+			unsigned short data = le16_to_cpu(raw_data);
+
+			pkt[i] = (unsigned char) data;
+			pkt[i + 1] = (unsigned char) (data >> 8);
+		}
+	} else {
+		len = inw(hw->base_port);
+		if (len > hw->ll_mtu) {
+			printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+			       ": received a packet of %u bytes - longer than the MTU!\n", len);
+			writew(MEMRX_PCINTACKK,
+				&hw->memory_info_regs->memreg_pc_interrupt_ack);
+			return;
+		}
+
+		for (i = 0; i < len; i += 2) {
+			__le16 raw_data = inw(hw->base_port);
+			unsigned short data = le16_to_cpu(raw_data);
+
+			pkt[i] = (unsigned char) data;
+			pkt[i + 1] = (unsigned char) (data >> 8);
+		}
+
+		while ((i & 3) != 2) {
+			inw(hw->base_port);
+			i += 2;
+		}
+	}
+
+	acknowledge_data_read(hw);
+
+	swap_packet_bitfield_from_le(pkt);
+
+	if (ipwireless_debug)
+		dump_data_bytes("recv", pkt, len);
+
+	handle_received_packet(hw, (union nl_packet *) pkt, len);
+
+	end_read_timing(len);
+}
+
+static int get_current_packet_priority(struct ipw_hardware *hw)
+{
+	/*
+	 * If we're initializing, don't send anything of higher priority than
+	 * PRIO_SETUP.  The network layer therefore need not care about
+	 * hardware initialization - any of its stuff will simply be queued
+	 * until setup is complete.
+	 */
+	return (hw->to_setup || hw->initializing
+			? PRIO_SETUP + 1 : NL_NUM_OF_PRIORITIES);
+}
+
+/*
+ * return 1 if something has been received from hw
+ */
+static int get_packets_from_hw(struct ipw_hardware *hw)
+{
+	int received = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	while (hw->rx_ready && !hw->blocking_rx) {
+		received = 1;
+		hw->rx_ready--;
+		spin_unlock_irqrestore(&hw->lock, flags);
+
+		do_receive_packet(hw);
+
+		spin_lock_irqsave(&hw->lock, flags);
+	}
+	spin_unlock_irqrestore(&hw->lock, flags);
+
+	return received;
+}
+
+/*
+ * Send pending packet up to given priority, prioritize SETUP data until
+ * hardware is fully setup.
+ *
+ * return 1 if more packets can be sent
+ */
+static int send_pending_packet(struct ipw_hardware *hw, int priority_limit)
+{
+	int more_to_send = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	if (hw->tx_queued && hw->tx_ready) {
+		int priority;
+		struct ipw_tx_packet *packet = NULL;
+
+		/* Pick a packet */
+		for (priority = 0; priority < priority_limit; priority++) {
+			if (!list_empty(&hw->tx_queue[priority])) {
+				packet = list_first_entry(
+						&hw->tx_queue[priority],
+						struct ipw_tx_packet,
+						queue);
+
+				hw->tx_queued--;
+				list_del(&packet->queue);
+
+				break;
+			}
+		}
+		if (!packet) {
+			hw->tx_queued = 0;
+			spin_unlock_irqrestore(&hw->lock, flags);
+			return 0;
+		}
+
+		spin_unlock_irqrestore(&hw->lock, flags);
+
+		/* Send */
+		do_send_packet(hw, packet);
+
+		/* Check if more to send */
+		spin_lock_irqsave(&hw->lock, flags);
+		for (priority = 0; priority < priority_limit; priority++)
+			if (!list_empty(&hw->tx_queue[priority])) {
+				more_to_send = 1;
+				break;
+			}
+
+		if (!more_to_send)
+			hw->tx_queued = 0;
+	}
+	spin_unlock_irqrestore(&hw->lock, flags);
+
+	return more_to_send;
+}
+
+/*
+ * Send and receive all queued packets.
+ */
+static void ipwireless_do_tasklet(unsigned long hw_)
+{
+	struct ipw_hardware *hw = (struct ipw_hardware *) hw_;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	if (hw->shutting_down) {
+		spin_unlock_irqrestore(&hw->lock, flags);
+		return;
+	}
+
+	if (hw->to_setup == 1) {
+		/*
+		 * Initial setup data sent to hardware
+		 */
+		hw->to_setup = 2;
+		spin_unlock_irqrestore(&hw->lock, flags);
+
+		ipw_setup_hardware(hw);
+		ipw_send_setup_packet(hw);
+
+		send_pending_packet(hw, PRIO_SETUP + 1);
+		get_packets_from_hw(hw);
+	} else {
+		int priority_limit = get_current_packet_priority(hw);
+		int again;
+
+		spin_unlock_irqrestore(&hw->lock, flags);
+
+		do {
+			again = send_pending_packet(hw, priority_limit);
+			again |= get_packets_from_hw(hw);
+		} while (again);
+	}
+}
+
+/*
+ * return true if the card is physically present.
+ */
+static int is_card_present(struct ipw_hardware *hw)
+{
+	if (hw->hw_version == HW_VERSION_1)
+		return inw(hw->base_port + IOIR) != 0xFFFF;
+	else
+		return readl(&hw->memory_info_regs->memreg_card_present) ==
+		    CARD_PRESENT_VALUE;
+}
+
+static irqreturn_t ipwireless_handle_v1_interrupt(int irq,
+						  struct ipw_hardware *hw)
+{
+	unsigned short irqn;
+
+	irqn = inw(hw->base_port + IOIR);
+
+	/* Check if card is present */
+	if (irqn == 0xFFFF)
+		return IRQ_NONE;
+	else if (irqn != 0) {
+		unsigned short ack = 0;
+		unsigned long flags;
+
+		/* Transmit complete. */
+		if (irqn & IR_TXINTR) {
+			ack |= IR_TXINTR;
+			spin_lock_irqsave(&hw->lock, flags);
+			hw->tx_ready = 1;
+			spin_unlock_irqrestore(&hw->lock, flags);
+		}
+		/* Received data */
+		if (irqn & IR_RXINTR) {
+			ack |= IR_RXINTR;
+			spin_lock_irqsave(&hw->lock, flags);
+			hw->rx_ready++;
+			spin_unlock_irqrestore(&hw->lock, flags);
+		}
+		if (ack != 0) {
+			outw(ack, hw->base_port + IOIR);
+			tasklet_schedule(&hw->tasklet);
+		}
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static void acknowledge_pcmcia_interrupt(struct ipw_hardware *hw)
+{
+	unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status);
+
+	csr &= 0xfffd;
+	writew(csr, &hw->memregs_CCR->reg_config_and_status);
+}
+
+static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
+						     struct ipw_hardware *hw)
+{
+	int tx = 0;
+	int rx = 0;
+	int rx_repeat = 0;
+	int try_mem_tx_old;
+	unsigned long flags;
+
+	do {
+
+	unsigned short memtx = readw(hw->memreg_tx);
+	unsigned short memtx_serial;
+	unsigned short memrxdone =
+		readw(&hw->memory_info_regs->memreg_rx_done);
+
+	try_mem_tx_old = 0;
+
+	/* check whether the interrupt was generated by ipwireless card */
+	if (!(memtx & MEMTX_TX) && !(memrxdone & MEMRX_RX_DONE)) {
+
+		/* check if the card uses memreg_tx_old register */
+		if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) {
+			memtx = readw(&hw->memory_info_regs->memreg_tx_old);
+			if (memtx & MEMTX_TX) {
+				printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+					": Using memreg_tx_old\n");
+				hw->memreg_tx =
+					&hw->memory_info_regs->memreg_tx_old;
+			} else {
+				return IRQ_NONE;
+			}
+		} else
+			return IRQ_NONE;
+	}
+
+	/*
+	 * See if the card is physically present. Note that while it is
+	 * powering up, it appears not to be present.
+	 */
+	if (!is_card_present(hw)) {
+		acknowledge_pcmcia_interrupt(hw);
+		return IRQ_HANDLED;
+	}
+
+	memtx_serial = memtx & (unsigned short) 0xff00;
+	if (memtx & MEMTX_TX) {
+		writew(memtx_serial, hw->memreg_tx);
+
+		if (hw->serial_number_detected) {
+			if (memtx_serial != hw->last_memtx_serial) {
+				hw->last_memtx_serial = memtx_serial;
+				spin_lock_irqsave(&hw->lock, flags);
+				hw->rx_ready++;
+				spin_unlock_irqrestore(&hw->lock, flags);
+				rx = 1;
+			} else
+				/* Ignore 'Timer Recovery' duplicates. */
+				rx_repeat = 1;
+		} else {
+			/*
+			 * If a non-zero serial number is seen, then enable
+			 * serial number checking.
+			 */
+			if (memtx_serial != 0) {
+				hw->serial_number_detected = 1;
+				printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
+					": memreg_tx serial num detected\n");
+
+				spin_lock_irqsave(&hw->lock, flags);
+				hw->rx_ready++;
+				spin_unlock_irqrestore(&hw->lock, flags);
+			}
+			rx = 1;
+		}
+	}
+	if (memrxdone & MEMRX_RX_DONE) {
+		writew(0, &hw->memory_info_regs->memreg_rx_done);
+		spin_lock_irqsave(&hw->lock, flags);
+		hw->tx_ready = 1;
+		spin_unlock_irqrestore(&hw->lock, flags);
+		tx = 1;
+	}
+	if (tx)
+		writew(MEMRX_PCINTACKK,
+				&hw->memory_info_regs->memreg_pc_interrupt_ack);
+
+	acknowledge_pcmcia_interrupt(hw);
+
+	if (tx || rx)
+		tasklet_schedule(&hw->tasklet);
+	else if (!rx_repeat) {
+		if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) {
+			if (hw->serial_number_detected)
+				printk(KERN_WARNING IPWIRELESS_PCCARD_NAME
+					": spurious interrupt - new_tx mode\n");
+			else {
+				printk(KERN_WARNING IPWIRELESS_PCCARD_NAME
+					": no valid memreg_tx value - switching to the old memreg_tx\n");
+				hw->memreg_tx =
+					&hw->memory_info_regs->memreg_tx_old;
+				try_mem_tx_old = 1;
+			}
+		} else
+			printk(KERN_WARNING IPWIRELESS_PCCARD_NAME
+					": spurious interrupt - old_tx mode\n");
+	}
+
+	} while (try_mem_tx_old == 1);
+
+	return IRQ_HANDLED;
+}
+
+irqreturn_t ipwireless_interrupt(int irq, void *dev_id)
+{
+	struct ipw_dev *ipw = dev_id;
+
+	if (ipw->hardware->hw_version == HW_VERSION_1)
+		return ipwireless_handle_v1_interrupt(irq, ipw->hardware);
+	else
+		return ipwireless_handle_v2_v3_interrupt(irq, ipw->hardware);
+}
+
+static void flush_packets_to_hw(struct ipw_hardware *hw)
+{
+	int priority_limit;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	priority_limit = get_current_packet_priority(hw);
+	spin_unlock_irqrestore(&hw->lock, flags);
+
+	while (send_pending_packet(hw, priority_limit));
+}
+
+static void send_packet(struct ipw_hardware *hw, int priority,
+			struct ipw_tx_packet *packet)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	list_add_tail(&packet->queue, &hw->tx_queue[priority]);
+	hw->tx_queued++;
+	spin_unlock_irqrestore(&hw->lock, flags);
+
+	flush_packets_to_hw(hw);
+}
+
+/* Create data packet, non-atomic allocation */
+static void *alloc_data_packet(int data_size,
+				unsigned char dest_addr,
+				unsigned char protocol)
+{
+	struct ipw_tx_packet *packet = kzalloc(
+			sizeof(struct ipw_tx_packet) + data_size,
+			GFP_ATOMIC);
+
+	if (!packet)
+		return NULL;
+
+	INIT_LIST_HEAD(&packet->queue);
+	packet->dest_addr = dest_addr;
+	packet->protocol = protocol;
+	packet->length = data_size;
+
+	return packet;
+}
+
+static void *alloc_ctrl_packet(int header_size,
+			       unsigned char dest_addr,
+			       unsigned char protocol,
+			       unsigned char sig_no)
+{
+	/*
+	 * sig_no is located right after ipw_tx_packet struct in every
+	 * CTRL or SETUP packets, we can use ipw_control_packet as a
+	 * common struct
+	 */
+	struct ipw_control_packet *packet = kzalloc(header_size, GFP_ATOMIC);
+
+	if (!packet)
+		return NULL;
+
+	INIT_LIST_HEAD(&packet->header.queue);
+	packet->header.dest_addr = dest_addr;
+	packet->header.protocol = protocol;
+	packet->header.length = header_size - sizeof(struct ipw_tx_packet);
+	packet->body.sig_no = sig_no;
+
+	return packet;
+}
+
+int ipwireless_send_packet(struct ipw_hardware *hw, unsigned int channel_idx,
+			    const unsigned char *data, unsigned int length,
+			    void (*callback) (void *cb, unsigned int length),
+			    void *callback_data)
+{
+	struct ipw_tx_packet *packet;
+
+	packet = alloc_data_packet(length, (channel_idx + 1),
+			TL_PROTOCOLID_COM_DATA);
+	if (!packet)
+		return -ENOMEM;
+	packet->packet_callback = callback;
+	packet->callback_data = callback_data;
+	memcpy((unsigned char *) packet + sizeof(struct ipw_tx_packet), data,
+			length);
+
+	send_packet(hw, PRIO_DATA, packet);
+	return 0;
+}
+
+static int set_control_line(struct ipw_hardware *hw, int prio,
+			   unsigned int channel_idx, int line, int state)
+{
+	struct ipw_control_packet *packet;
+	int protocolid = TL_PROTOCOLID_COM_CTRL;
+
+	if (prio == PRIO_SETUP)
+		protocolid = TL_PROTOCOLID_SETUP;
+
+	packet = alloc_ctrl_packet(sizeof(struct ipw_control_packet),
+			(channel_idx + 1), protocolid, line);
+	if (!packet)
+		return -ENOMEM;
+	packet->header.length = sizeof(struct ipw_control_packet_body);
+	packet->body.value = (state == 0 ? 0 : 1);
+	send_packet(hw, prio, &packet->header);
+	return 0;
+}
+
+
+static int set_DTR(struct ipw_hardware *hw, int priority,
+		   unsigned int channel_idx, int state)
+{
+	if (state != 0)
+		hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_DTR;
+	else
+		hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_DTR;
+
+	return set_control_line(hw, priority, channel_idx, COMCTRL_DTR, state);
+}
+
+static int set_RTS(struct ipw_hardware *hw, int priority,
+		   unsigned int channel_idx, int state)
+{
+	if (state != 0)
+		hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_RTS;
+	else
+		hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_RTS;
+
+	return set_control_line(hw, priority, channel_idx, COMCTRL_RTS, state);
+}
+
+int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx,
+		       int state)
+{
+	return set_DTR(hw, PRIO_CTRL, channel_idx, state);
+}
+
+int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx,
+		       int state)
+{
+	return set_RTS(hw, PRIO_CTRL, channel_idx, state);
+}
+
+struct ipw_setup_get_version_query_packet {
+	struct ipw_tx_packet header;
+	struct tl_setup_get_version_qry body;
+};
+
+struct ipw_setup_config_packet {
+	struct ipw_tx_packet header;
+	struct tl_setup_config_msg body;
+};
+
+struct ipw_setup_config_done_packet {
+	struct ipw_tx_packet header;
+	struct tl_setup_config_done_msg body;
+};
+
+struct ipw_setup_open_packet {
+	struct ipw_tx_packet header;
+	struct tl_setup_open_msg body;
+};
+
+struct ipw_setup_info_packet {
+	struct ipw_tx_packet header;
+	struct tl_setup_info_msg body;
+};
+
+struct ipw_setup_reboot_msg_ack {
+	struct ipw_tx_packet header;
+	struct TlSetupRebootMsgAck body;
+};
+
+/* This handles the actual initialization of the card */
+static void __handle_setup_get_version_rsp(struct ipw_hardware *hw)
+{
+	struct ipw_setup_config_packet *config_packet;
+	struct ipw_setup_config_done_packet *config_done_packet;
+	struct ipw_setup_open_packet *open_packet;
+	struct ipw_setup_info_packet *info_packet;
+	int port;
+	unsigned int channel_idx;
+
+	/* generate config packet */
+	for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) {
+		config_packet = alloc_ctrl_packet(
+				sizeof(struct ipw_setup_config_packet),
+				ADDR_SETUP_PROT,
+				TL_PROTOCOLID_SETUP,
+				TL_SETUP_SIGNO_CONFIG_MSG);
+		if (!config_packet)
+			goto exit_nomem;
+		config_packet->header.length = sizeof(struct tl_setup_config_msg);
+		config_packet->body.port_no = port;
+		config_packet->body.prio_data = PRIO_DATA;
+		config_packet->body.prio_ctrl = PRIO_CTRL;
+		send_packet(hw, PRIO_SETUP, &config_packet->header);
+	}
+	config_done_packet = alloc_ctrl_packet(
+			sizeof(struct ipw_setup_config_done_packet),
+			ADDR_SETUP_PROT,
+			TL_PROTOCOLID_SETUP,
+			TL_SETUP_SIGNO_CONFIG_DONE_MSG);
+	if (!config_done_packet)
+		goto exit_nomem;
+	config_done_packet->header.length = sizeof(struct tl_setup_config_done_msg);
+	send_packet(hw, PRIO_SETUP, &config_done_packet->header);
+
+	/* generate open packet */
+	for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) {
+		open_packet = alloc_ctrl_packet(
+				sizeof(struct ipw_setup_open_packet),
+				ADDR_SETUP_PROT,
+				TL_PROTOCOLID_SETUP,
+				TL_SETUP_SIGNO_OPEN_MSG);
+		if (!open_packet)
+			goto exit_nomem;
+		open_packet->header.length = sizeof(struct tl_setup_open_msg);
+		open_packet->body.port_no = port;
+		send_packet(hw, PRIO_SETUP, &open_packet->header);
+	}
+	for (channel_idx = 0;
+			channel_idx < NL_NUM_OF_ADDRESSES; channel_idx++) {
+		int ret;
+
+		ret = set_DTR(hw, PRIO_SETUP, channel_idx,
+			(hw->control_lines[channel_idx] &
+			 IPW_CONTROL_LINE_DTR) != 0);
+		if (ret) {
+			printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+					": error setting DTR (%d)\n", ret);
+			return;
+		}
+
+		set_RTS(hw, PRIO_SETUP, channel_idx,
+			(hw->control_lines [channel_idx] &
+			 IPW_CONTROL_LINE_RTS) != 0);
+		if (ret) {
+			printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+					": error setting RTS (%d)\n", ret);
+			return;
+		}
+	}
+	/*
+	 * For NDIS we assume that we are using sync PPP frames, for COM async.
+	 * This driver uses NDIS mode too. We don't bother with translation
+	 * from async -> sync PPP.
+	 */
+	info_packet = alloc_ctrl_packet(sizeof(struct ipw_setup_info_packet),
+			ADDR_SETUP_PROT,
+			TL_PROTOCOLID_SETUP,
+			TL_SETUP_SIGNO_INFO_MSG);
+	if (!info_packet)
+		goto exit_nomem;
+	info_packet->header.length = sizeof(struct tl_setup_info_msg);
+	info_packet->body.driver_type = NDISWAN_DRIVER;
+	info_packet->body.major_version = NDISWAN_DRIVER_MAJOR_VERSION;
+	info_packet->body.minor_version = NDISWAN_DRIVER_MINOR_VERSION;
+	send_packet(hw, PRIO_SETUP, &info_packet->header);
+
+	/* Initialization is now complete, so we clear the 'to_setup' flag */
+	hw->to_setup = 0;
+
+	return;
+
+exit_nomem:
+	printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+			": not enough memory to alloc control packet\n");
+	hw->to_setup = -1;
+}
+
+static void handle_setup_get_version_rsp(struct ipw_hardware *hw,
+		unsigned char vers_no)
+{
+	del_timer(&hw->setup_timer);
+	hw->initializing = 0;
+	printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": card is ready.\n");
+
+	if (vers_no == TL_SETUP_VERSION)
+		__handle_setup_get_version_rsp(hw);
+	else
+		printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+				": invalid hardware version no %u\n",
+				(unsigned int) vers_no);
+}
+
+static void ipw_send_setup_packet(struct ipw_hardware *hw)
+{
+	struct ipw_setup_get_version_query_packet *ver_packet;
+
+	ver_packet = alloc_ctrl_packet(
+			sizeof(struct ipw_setup_get_version_query_packet),
+			ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP,
+			TL_SETUP_SIGNO_GET_VERSION_QRY);
+	ver_packet->header.length = sizeof(struct tl_setup_get_version_qry);
+
+	/*
+	 * Response is handled in handle_received_SETUP_packet
+	 */
+	send_packet(hw, PRIO_SETUP, &ver_packet->header);
+}
+
+static void handle_received_SETUP_packet(struct ipw_hardware *hw,
+					 unsigned int address,
+					 const unsigned char *data, int len,
+					 int is_last)
+{
+	const union ipw_setup_rx_msg *rx_msg = (const union ipw_setup_rx_msg *) data;
+
+	if (address != ADDR_SETUP_PROT) {
+		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+		       ": setup packet has bad address %d\n", address);
+		return;
+	}
+
+	switch (rx_msg->sig_no) {
+	case TL_SETUP_SIGNO_GET_VERSION_RSP:
+		if (hw->to_setup)
+			handle_setup_get_version_rsp(hw,
+					rx_msg->version_rsp_msg.version);
+		break;
+
+	case TL_SETUP_SIGNO_OPEN_MSG:
+		if (ipwireless_debug) {
+			unsigned int channel_idx = rx_msg->open_msg.port_no - 1;
+
+			printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+			       ": OPEN_MSG [channel %u] reply received\n",
+			       channel_idx);
+		}
+		break;
+
+	case TL_SETUP_SIGNO_INFO_MSG_ACK:
+		if (ipwireless_debug)
+			printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
+			       ": card successfully configured as NDISWAN\n");
+		break;
+
+	case TL_SETUP_SIGNO_REBOOT_MSG:
+		if (hw->to_setup)
+			printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
+			       ": Setup not completed - ignoring reboot msg\n");
+		else {
+			struct ipw_setup_reboot_msg_ack *packet;
+
+			printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
+			       ": Acknowledging REBOOT message\n");
+			packet = alloc_ctrl_packet(
+					sizeof(struct ipw_setup_reboot_msg_ack),
+					ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP,
+					TL_SETUP_SIGNO_REBOOT_MSG_ACK);
+			packet->header.length =
+				sizeof(struct TlSetupRebootMsgAck);
+			send_packet(hw, PRIO_SETUP, &packet->header);
+			if (hw->reboot_callback)
+				hw->reboot_callback(hw->reboot_callback_data);
+		}
+		break;
+
+	default:
+		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+		       ": unknown setup message %u received\n",
+		       (unsigned int) rx_msg->sig_no);
+	}
+}
+
+static void do_close_hardware(struct ipw_hardware *hw)
+{
+	unsigned int irqn;
+
+	if (hw->hw_version == HW_VERSION_1) {
+		/* Disable TX and RX interrupts. */
+		outw(0, hw->base_port + IOIER);
+
+		/* Acknowledge any outstanding interrupt requests */
+		irqn = inw(hw->base_port + IOIR);
+		if (irqn & IR_TXINTR)
+			outw(IR_TXINTR, hw->base_port + IOIR);
+		if (irqn & IR_RXINTR)
+			outw(IR_RXINTR, hw->base_port + IOIR);
+
+		synchronize_irq(hw->irq);
+	}
+}
+
+struct ipw_hardware *ipwireless_hardware_create(void)
+{
+	int i;
+	struct ipw_hardware *hw =
+		kzalloc(sizeof(struct ipw_hardware), GFP_KERNEL);
+
+	if (!hw)
+		return NULL;
+
+	hw->irq = -1;
+	hw->initializing = 1;
+	hw->tx_ready = 1;
+	hw->rx_bytes_queued = 0;
+	hw->rx_pool_size = 0;
+	hw->last_memtx_serial = (unsigned short) 0xffff;
+	for (i = 0; i < NL_NUM_OF_PRIORITIES; i++)
+		INIT_LIST_HEAD(&hw->tx_queue[i]);
+
+	INIT_LIST_HEAD(&hw->rx_queue);
+	INIT_LIST_HEAD(&hw->rx_pool);
+	spin_lock_init(&hw->lock);
+	tasklet_init(&hw->tasklet, ipwireless_do_tasklet, (unsigned long) hw);
+	INIT_WORK(&hw->work_rx, ipw_receive_data_work);
+	setup_timer(&hw->setup_timer, ipwireless_setup_timer,
+			(unsigned long) hw);
+
+	return hw;
+}
+
+void ipwireless_init_hardware_v1(struct ipw_hardware *hw,
+		unsigned int base_port,
+		void __iomem *attr_memory,
+		void __iomem *common_memory,
+		int is_v2_card,
+		void (*reboot_callback) (void *data),
+		void *reboot_callback_data)
+{
+	if (hw->removed) {
+		hw->removed = 0;
+		enable_irq(hw->irq);
+	}
+	hw->base_port = base_port;
+	hw->hw_version = (is_v2_card ? HW_VERSION_2 : HW_VERSION_1);
+	hw->ll_mtu = (hw->hw_version == HW_VERSION_1 ? LL_MTU_V1 : LL_MTU_V2);
+	hw->memregs_CCR = (struct MEMCCR __iomem *)
+			((unsigned short __iomem *) attr_memory + 0x200);
+	hw->memory_info_regs = (struct MEMINFREG __iomem *) common_memory;
+	hw->memreg_tx = &hw->memory_info_regs->memreg_tx_new;
+	hw->reboot_callback = reboot_callback;
+	hw->reboot_callback_data = reboot_callback_data;
+}
+
+void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw)
+{
+	hw->initializing = 1;
+	hw->init_loops = 0;
+	printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+	       ": waiting for card to start up...\n");
+	ipwireless_setup_timer((unsigned long) hw);
+}
+
+static void ipwireless_setup_timer(unsigned long data)
+{
+	struct ipw_hardware *hw = (struct ipw_hardware *) data;
+
+	hw->init_loops++;
+
+	if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY &&
+			hw->hw_version == HW_VERSION_2 &&
+			hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) {
+		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+				": failed to startup using TX2, trying TX\n");
+
+		hw->memreg_tx = &hw->memory_info_regs->memreg_tx_old;
+		hw->init_loops = 0;
+	}
+	/* Give up after a certain number of retries */
+	if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY) {
+		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+		       ": card failed to start up!\n");
+		hw->initializing = 0;
+	} else {
+		/* Do not attempt to write to the board if it is not present. */
+		if (is_card_present(hw)) {
+			unsigned long flags;
+
+			spin_lock_irqsave(&hw->lock, flags);
+			hw->to_setup = 1;
+			hw->tx_ready = 1;
+			spin_unlock_irqrestore(&hw->lock, flags);
+			tasklet_schedule(&hw->tasklet);
+		}
+
+		mod_timer(&hw->setup_timer,
+			jiffies + msecs_to_jiffies(TL_SETUP_VERSION_QRY_TMO));
+	}
+}
+
+/*
+ * Stop any interrupts from executing so that, once this function returns,
+ * other layers of the driver can be sure they won't get any more callbacks.
+ * Thus must be called on a proper process context.
+ */
+void ipwireless_stop_interrupts(struct ipw_hardware *hw)
+{
+	if (!hw->shutting_down) {
+		/* Tell everyone we are going down. */
+		hw->shutting_down = 1;
+		del_timer(&hw->setup_timer);
+
+		/* Prevent the hardware from sending any more interrupts */
+		do_close_hardware(hw);
+	}
+}
+
+void ipwireless_hardware_free(struct ipw_hardware *hw)
+{
+	int i;
+	struct ipw_rx_packet *rp, *rq;
+	struct ipw_tx_packet *tp, *tq;
+
+	ipwireless_stop_interrupts(hw);
+
+	flush_work_sync(&hw->work_rx);
+
+	for (i = 0; i < NL_NUM_OF_ADDRESSES; i++)
+		if (hw->packet_assembler[i] != NULL)
+			kfree(hw->packet_assembler[i]);
+
+	for (i = 0; i < NL_NUM_OF_PRIORITIES; i++)
+		list_for_each_entry_safe(tp, tq, &hw->tx_queue[i], queue) {
+			list_del(&tp->queue);
+			kfree(tp);
+		}
+
+	list_for_each_entry_safe(rp, rq, &hw->rx_queue, queue) {
+		list_del(&rp->queue);
+		kfree(rp);
+	}
+
+	list_for_each_entry_safe(rp, rq, &hw->rx_pool, queue) {
+		list_del(&rp->queue);
+		kfree(rp);
+	}
+	kfree(hw);
+}
+
+/*
+ * Associate the specified network with this hardware, so it will receive events
+ * from it.
+ */
+void ipwireless_associate_network(struct ipw_hardware *hw,
+				  struct ipw_network *network)
+{
+	hw->network = network;
+}
diff --git a/drivers/tty/ipwireless/hardware.h b/drivers/tty/ipwireless/hardware.h
new file mode 100644
index 000000000000..90a8590e43b0
--- /dev/null
+++ b/drivers/tty/ipwireless/hardware.h
@@ -0,0 +1,62 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ *   by Stephen Blackheath <stephen@blacksapphire.com>,
+ *      Ben Martel <benm@symmetric.co.nz>
+ *
+ * Copyrighted as follows:
+ *   Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ *   Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ *   Copyright (C) 2007 David Sterba
+ */
+
+#ifndef _IPWIRELESS_CS_HARDWARE_H_
+#define _IPWIRELESS_CS_HARDWARE_H_
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#define IPW_CONTROL_LINE_CTS 0x0001
+#define IPW_CONTROL_LINE_DCD 0x0002
+#define IPW_CONTROL_LINE_DSR 0x0004
+#define IPW_CONTROL_LINE_RI  0x0008
+#define IPW_CONTROL_LINE_DTR 0x0010
+#define IPW_CONTROL_LINE_RTS 0x0020
+
+struct ipw_hardware;
+struct ipw_network;
+
+struct ipw_hardware *ipwireless_hardware_create(void);
+void ipwireless_hardware_free(struct ipw_hardware *hw);
+irqreturn_t ipwireless_interrupt(int irq, void *dev_id);
+int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx,
+		int state);
+int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx,
+		int state);
+int ipwireless_send_packet(struct ipw_hardware *hw,
+			    unsigned int channel_idx,
+			    const unsigned char *data,
+			    unsigned int length,
+			    void (*packet_sent_callback) (void *cb,
+							  unsigned int length),
+			    void *sent_cb_data);
+void ipwireless_associate_network(struct ipw_hardware *hw,
+		struct ipw_network *net);
+void ipwireless_stop_interrupts(struct ipw_hardware *hw);
+void ipwireless_init_hardware_v1(struct ipw_hardware *hw,
+				 unsigned int base_port,
+				 void __iomem *attr_memory,
+				 void __iomem *common_memory,
+				 int is_v2_card,
+				 void (*reboot_cb) (void *data),
+				 void *reboot_cb_data);
+void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw);
+void ipwireless_sleep(unsigned int tenths);
+
+#endif
diff --git a/drivers/tty/ipwireless/main.c b/drivers/tty/ipwireless/main.c
new file mode 100644
index 000000000000..444155a305ae
--- /dev/null
+++ b/drivers/tty/ipwireless/main.c
@@ -0,0 +1,347 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ *   by Stephen Blackheath <stephen@blacksapphire.com>,
+ *      Ben Martel <benm@symmetric.co.nz>
+ *
+ * Copyrighted as follows:
+ *   Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ *   Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ *   Copyright (C) 2007 David Sterba
+ */
+
+#include "hardware.h"
+#include "network.h"
+#include "main.h"
+#include "tty.h"
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <pcmcia/cisreg.h>
+#include <pcmcia/device_id.h>
+#include <pcmcia/ss.h>
+#include <pcmcia/ds.h>
+
+static struct pcmcia_device_id ipw_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100),
+	PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0200),
+	PCMCIA_DEVICE_NULL
+};
+MODULE_DEVICE_TABLE(pcmcia, ipw_ids);
+
+static void ipwireless_detach(struct pcmcia_device *link);
+
+/*
+ * Module params
+ */
+/* Debug mode: more verbose, print sent/recv bytes */
+int ipwireless_debug;
+int ipwireless_loopback;
+int ipwireless_out_queue = 10;
+
+module_param_named(debug, ipwireless_debug, int, 0);
+module_param_named(loopback, ipwireless_loopback, int, 0);
+module_param_named(out_queue, ipwireless_out_queue, int, 0);
+MODULE_PARM_DESC(debug, "switch on debug messages [0]");
+MODULE_PARM_DESC(loopback,
+		"debug: enable ras_raw channel [0]");
+MODULE_PARM_DESC(out_queue, "debug: set size of outgoing PPP queue [10]");
+
+/* Executes in process context. */
+static void signalled_reboot_work(struct work_struct *work_reboot)
+{
+	struct ipw_dev *ipw = container_of(work_reboot, struct ipw_dev,
+			work_reboot);
+	struct pcmcia_device *link = ipw->link;
+	pcmcia_reset_card(link->socket);
+}
+
+static void signalled_reboot_callback(void *callback_data)
+{
+	struct ipw_dev *ipw = (struct ipw_dev *) callback_data;
+
+	/* Delegate to process context. */
+	schedule_work(&ipw->work_reboot);
+}
+
+static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data)
+{
+	struct ipw_dev *ipw = priv_data;
+	int ret;
+
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+
+	/* 0x40 causes it to generate level mode interrupts. */
+	/* 0x04 enables IREQ pin. */
+	p_dev->config_index |= 0x44;
+	p_dev->io_lines = 16;
+	ret = pcmcia_request_io(p_dev);
+	if (ret)
+		return ret;
+
+	if (!request_region(p_dev->resource[0]->start,
+			    resource_size(p_dev->resource[0]),
+			    IPWIRELESS_PCCARD_NAME)) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	p_dev->resource[2]->flags |=
+		WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE;
+
+	ret = pcmcia_request_window(p_dev, p_dev->resource[2], 0);
+	if (ret != 0)
+		goto exit1;
+
+	ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr);
+	if (ret != 0)
+		goto exit1;
+
+	ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100;
+
+	ipw->common_memory = ioremap(p_dev->resource[2]->start,
+				resource_size(p_dev->resource[2]));
+	if (!request_mem_region(p_dev->resource[2]->start,
+				resource_size(p_dev->resource[2]),
+				IPWIRELESS_PCCARD_NAME)) {
+		ret = -EBUSY;
+		goto exit2;
+	}
+
+	p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM |
+					WIN_ENABLE;
+	p_dev->resource[3]->end = 0; /* this used to be 0x1000 */
+	ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0);
+	if (ret != 0)
+		goto exit3;
+
+	ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0);
+	if (ret != 0)
+		goto exit3;
+
+	ipw->attr_memory = ioremap(p_dev->resource[3]->start,
+				resource_size(p_dev->resource[3]));
+	if (!request_mem_region(p_dev->resource[3]->start,
+				resource_size(p_dev->resource[3]),
+				IPWIRELESS_PCCARD_NAME)) {
+		ret = -EBUSY;
+		goto exit4;
+	}
+
+	return 0;
+
+exit4:
+	iounmap(ipw->attr_memory);
+exit3:
+	release_mem_region(p_dev->resource[2]->start,
+			resource_size(p_dev->resource[2]));
+exit2:
+	iounmap(ipw->common_memory);
+exit1:
+	release_region(p_dev->resource[0]->start,
+		       resource_size(p_dev->resource[0]));
+exit:
+	pcmcia_disable_device(p_dev);
+	return ret;
+}
+
+static int config_ipwireless(struct ipw_dev *ipw)
+{
+	struct pcmcia_device *link = ipw->link;
+	int ret = 0;
+
+	ipw->is_v2_card = 0;
+	link->config_flags |= CONF_AUTO_SET_IO | CONF_AUTO_SET_IOMEM |
+		CONF_ENABLE_IRQ;
+
+	ret = pcmcia_loop_config(link, ipwireless_probe, ipw);
+	if (ret != 0)
+		return ret;
+
+	INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
+
+	ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start,
+				    ipw->attr_memory, ipw->common_memory,
+				    ipw->is_v2_card, signalled_reboot_callback,
+				    ipw);
+
+	ret = pcmcia_request_irq(link, ipwireless_interrupt);
+	if (ret != 0)
+		goto exit;
+
+	printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n",
+			ipw->is_v2_card ? "V2/V3" : "V1");
+	printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+		": I/O ports %pR, irq %d\n", link->resource[0],
+			(unsigned int) link->irq);
+	if (ipw->attr_memory && ipw->common_memory)
+		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+			": attr memory %pR, common memory %pR\n",
+			link->resource[3],
+			link->resource[2]);
+
+	ipw->network = ipwireless_network_create(ipw->hardware);
+	if (!ipw->network)
+		goto exit;
+
+	ipw->tty = ipwireless_tty_create(ipw->hardware, ipw->network);
+	if (!ipw->tty)
+		goto exit;
+
+	ipwireless_init_hardware_v2_v3(ipw->hardware);
+
+	/*
+	 * Do the RequestConfiguration last, because it enables interrupts.
+	 * Then we don't get any interrupts before we're ready for them.
+	 */
+	ret = pcmcia_enable_device(link);
+	if (ret != 0)
+		goto exit;
+
+	return 0;
+
+exit:
+	if (ipw->common_memory) {
+		release_mem_region(link->resource[2]->start,
+				resource_size(link->resource[2]));
+		iounmap(ipw->common_memory);
+	}
+	if (ipw->attr_memory) {
+		release_mem_region(link->resource[3]->start,
+				resource_size(link->resource[3]));
+		iounmap(ipw->attr_memory);
+	}
+	pcmcia_disable_device(link);
+	return -1;
+}
+
+static void release_ipwireless(struct ipw_dev *ipw)
+{
+	release_region(ipw->link->resource[0]->start,
+		       resource_size(ipw->link->resource[0]));
+	if (ipw->common_memory) {
+		release_mem_region(ipw->link->resource[2]->start,
+				resource_size(ipw->link->resource[2]));
+		iounmap(ipw->common_memory);
+	}
+	if (ipw->attr_memory) {
+		release_mem_region(ipw->link->resource[3]->start,
+				resource_size(ipw->link->resource[3]));
+		iounmap(ipw->attr_memory);
+	}
+	pcmcia_disable_device(ipw->link);
+}
+
+/*
+ * ipwireless_attach() creates an "instance" of the driver, allocating
+ * local data structures for one device (one interface).  The device
+ * is registered with Card Services.
+ *
+ * The pcmcia_device structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a
+ * card insertion event.
+ */
+static int ipwireless_attach(struct pcmcia_device *link)
+{
+	struct ipw_dev *ipw;
+	int ret;
+
+	ipw = kzalloc(sizeof(struct ipw_dev), GFP_KERNEL);
+	if (!ipw)
+		return -ENOMEM;
+
+	ipw->link = link;
+	link->priv = ipw;
+
+	ipw->hardware = ipwireless_hardware_create();
+	if (!ipw->hardware) {
+		kfree(ipw);
+		return -ENOMEM;
+	}
+	/* RegisterClient will call config_ipwireless */
+
+	ret = config_ipwireless(ipw);
+
+	if (ret != 0) {
+		ipwireless_detach(link);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * This deletes a driver "instance".  The device is de-registered with
+ * Card Services.  If it has been released, all local data structures
+ * are freed.  Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void ipwireless_detach(struct pcmcia_device *link)
+{
+	struct ipw_dev *ipw = link->priv;
+
+	release_ipwireless(ipw);
+
+	if (ipw->tty != NULL)
+		ipwireless_tty_free(ipw->tty);
+	if (ipw->network != NULL)
+		ipwireless_network_free(ipw->network);
+	if (ipw->hardware != NULL)
+		ipwireless_hardware_free(ipw->hardware);
+	kfree(ipw);
+}
+
+static struct pcmcia_driver me = {
+	.owner		= THIS_MODULE,
+	.probe          = ipwireless_attach,
+	.remove         = ipwireless_detach,
+	.name		= IPWIRELESS_PCCARD_NAME,
+	.id_table       = ipw_ids
+};
+
+/*
+ * Module insertion : initialisation of the module.
+ * Register the card with cardmgr...
+ */
+static int __init init_ipwireless(void)
+{
+	int ret;
+
+	ret = ipwireless_tty_init();
+	if (ret != 0)
+		return ret;
+
+	ret = pcmcia_register_driver(&me);
+	if (ret != 0)
+		ipwireless_tty_release();
+
+	return ret;
+}
+
+/*
+ * Module removal
+ */
+static void __exit exit_ipwireless(void)
+{
+	pcmcia_unregister_driver(&me);
+	ipwireless_tty_release();
+}
+
+module_init(init_ipwireless);
+module_exit(exit_ipwireless);
+
+MODULE_AUTHOR(IPWIRELESS_PCMCIA_AUTHOR);
+MODULE_DESCRIPTION(IPWIRELESS_PCCARD_NAME " " IPWIRELESS_PCMCIA_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/ipwireless/main.h b/drivers/tty/ipwireless/main.h
new file mode 100644
index 000000000000..f2cbb116bccb
--- /dev/null
+++ b/drivers/tty/ipwireless/main.h
@@ -0,0 +1,68 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ *   by Stephen Blackheath <stephen@blacksapphire.com>,
+ *      Ben Martel <benm@symmetric.co.nz>
+ *
+ * Copyrighted as follows:
+ *   Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ *   Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ *   Copyright (C) 2007 David Sterba
+ */
+
+#ifndef _IPWIRELESS_CS_H_
+#define _IPWIRELESS_CS_H_
+
+#include <linux/sched.h>
+#include <linux/types.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+#include "hardware.h"
+
+#define IPWIRELESS_PCCARD_NAME		"ipwireless"
+#define IPWIRELESS_PCMCIA_VERSION	"1.1"
+#define IPWIRELESS_PCMCIA_AUTHOR        \
+	"Stephen Blackheath, Ben Martel, Jiri Kosina and David Sterba"
+
+#define IPWIRELESS_TX_QUEUE_SIZE  262144
+#define IPWIRELESS_RX_QUEUE_SIZE  262144
+
+#define IPWIRELESS_STATE_DEBUG
+
+struct ipw_hardware;
+struct ipw_network;
+struct ipw_tty;
+
+struct ipw_dev {
+	struct pcmcia_device *link;
+	int is_v2_card;
+
+	void __iomem *attr_memory;
+
+	void __iomem *common_memory;
+
+	/* Reference to attribute memory, containing CIS data */
+	void *attribute_memory;
+
+	/* Hardware context */
+	struct ipw_hardware *hardware;
+	/* Network layer context */
+	struct ipw_network *network;
+	/* TTY device context */
+	struct ipw_tty *tty;
+	struct work_struct work_reboot;
+};
+
+/* Module parametres */
+extern int ipwireless_debug;
+extern int ipwireless_loopback;
+extern int ipwireless_out_queue;
+
+#endif
diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c
new file mode 100644
index 000000000000..f7daeea598e4
--- /dev/null
+++ b/drivers/tty/ipwireless/network.c
@@ -0,0 +1,508 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ *   by Stephen Blackheath <stephen@blacksapphire.com>,
+ *      Ben Martel <benm@symmetric.co.nz>
+ *
+ * Copyrighted as follows:
+ *   Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ *   Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ *   Copyright (C) 2007 David Sterba
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/ppp_channel.h>
+#include <linux/ppp_defs.h>
+#include <linux/slab.h>
+#include <linux/if_ppp.h>
+#include <linux/skbuff.h>
+
+#include "network.h"
+#include "hardware.h"
+#include "main.h"
+#include "tty.h"
+
+#define MAX_ASSOCIATED_TTYS 2
+
+#define SC_RCV_BITS     (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
+
+struct ipw_network {
+	/* Hardware context, used for calls to hardware layer. */
+	struct ipw_hardware *hardware;
+	/* Context for kernel 'generic_ppp' functionality */
+	struct ppp_channel *ppp_channel;
+	/* tty context connected with IPW console */
+	struct ipw_tty *associated_ttys[NO_OF_IPW_CHANNELS][MAX_ASSOCIATED_TTYS];
+	/* True if ppp needs waking up once we're ready to xmit */
+	int ppp_blocked;
+	/* Number of packets queued up in hardware module. */
+	int outgoing_packets_queued;
+	/* Spinlock to avoid interrupts during shutdown */
+	spinlock_t lock;
+	struct mutex close_lock;
+
+	/* PPP ioctl data, not actually used anywere */
+	unsigned int flags;
+	unsigned int rbits;
+	u32 xaccm[8];
+	u32 raccm;
+	int mru;
+
+	int shutting_down;
+	unsigned int ras_control_lines;
+
+	struct work_struct work_go_online;
+	struct work_struct work_go_offline;
+};
+
+static void notify_packet_sent(void *callback_data, unsigned int packet_length)
+{
+	struct ipw_network *network = callback_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&network->lock, flags);
+	network->outgoing_packets_queued--;
+	if (network->ppp_channel != NULL) {
+		if (network->ppp_blocked) {
+			network->ppp_blocked = 0;
+			spin_unlock_irqrestore(&network->lock, flags);
+			ppp_output_wakeup(network->ppp_channel);
+			if (ipwireless_debug)
+				printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
+				       ": ppp unblocked\n");
+		} else
+			spin_unlock_irqrestore(&network->lock, flags);
+	} else
+		spin_unlock_irqrestore(&network->lock, flags);
+}
+
+/*
+ * Called by the ppp system when it has a packet to send to the hardware.
+ */
+static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
+				     struct sk_buff *skb)
+{
+	struct ipw_network *network = ppp_channel->private;
+	unsigned long flags;
+
+	spin_lock_irqsave(&network->lock, flags);
+	if (network->outgoing_packets_queued < ipwireless_out_queue) {
+		unsigned char *buf;
+		static unsigned char header[] = {
+			PPP_ALLSTATIONS, /* 0xff */
+			PPP_UI,		 /* 0x03 */
+		};
+		int ret;
+
+		network->outgoing_packets_queued++;
+		spin_unlock_irqrestore(&network->lock, flags);
+
+		/*
+		 * If we have the requested amount of headroom in the skb we
+		 * were handed, then we can add the header efficiently.
+		 */
+		if (skb_headroom(skb) >= 2) {
+			memcpy(skb_push(skb, 2), header, 2);
+			ret = ipwireless_send_packet(network->hardware,
+					       IPW_CHANNEL_RAS, skb->data,
+					       skb->len,
+					       notify_packet_sent,
+					       network);
+			if (ret == -1) {
+				skb_pull(skb, 2);
+				return 0;
+			}
+		} else {
+			/* Otherwise (rarely) we do it inefficiently. */
+			buf = kmalloc(skb->len + 2, GFP_ATOMIC);
+			if (!buf)
+				return 0;
+			memcpy(buf + 2, skb->data, skb->len);
+			memcpy(buf, header, 2);
+			ret = ipwireless_send_packet(network->hardware,
+					       IPW_CHANNEL_RAS, buf,
+					       skb->len + 2,
+					       notify_packet_sent,
+					       network);
+			kfree(buf);
+			if (ret == -1)
+				return 0;
+		}
+		kfree_skb(skb);
+		return 1;
+	} else {
+		/*
+		 * Otherwise reject the packet, and flag that the ppp system
+		 * needs to be unblocked once we are ready to send.
+		 */
+		network->ppp_blocked = 1;
+		spin_unlock_irqrestore(&network->lock, flags);
+		if (ipwireless_debug)
+			printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": ppp blocked\n");
+		return 0;
+	}
+}
+
+/* Handle an ioctl call that has come in via ppp. (copy of ppp_async_ioctl() */
+static int ipwireless_ppp_ioctl(struct ppp_channel *ppp_channel,
+				unsigned int cmd, unsigned long arg)
+{
+	struct ipw_network *network = ppp_channel->private;
+	int err, val;
+	u32 accm[8];
+	int __user *user_arg = (int __user *) arg;
+
+	err = -EFAULT;
+	switch (cmd) {
+	case PPPIOCGFLAGS:
+		val = network->flags | network->rbits;
+		if (put_user(val, user_arg))
+			break;
+		err = 0;
+		break;
+
+	case PPPIOCSFLAGS:
+		if (get_user(val, user_arg))
+			break;
+		network->flags = val & ~SC_RCV_BITS;
+		network->rbits = val & SC_RCV_BITS;
+		err = 0;
+		break;
+
+	case PPPIOCGASYNCMAP:
+		if (put_user(network->xaccm[0], user_arg))
+			break;
+		err = 0;
+		break;
+
+	case PPPIOCSASYNCMAP:
+		if (get_user(network->xaccm[0], user_arg))
+			break;
+		err = 0;
+		break;
+
+	case PPPIOCGRASYNCMAP:
+		if (put_user(network->raccm, user_arg))
+			break;
+		err = 0;
+		break;
+
+	case PPPIOCSRASYNCMAP:
+		if (get_user(network->raccm, user_arg))
+			break;
+		err = 0;
+		break;
+
+	case PPPIOCGXASYNCMAP:
+		if (copy_to_user((void __user *) arg, network->xaccm,
+					sizeof(network->xaccm)))
+			break;
+		err = 0;
+		break;
+
+	case PPPIOCSXASYNCMAP:
+		if (copy_from_user(accm, (void __user *) arg, sizeof(accm)))
+			break;
+		accm[2] &= ~0x40000000U;	/* can't escape 0x5e */
+		accm[3] |= 0x60000000U;	/* must escape 0x7d, 0x7e */
+		memcpy(network->xaccm, accm, sizeof(network->xaccm));
+		err = 0;
+		break;
+
+	case PPPIOCGMRU:
+		if (put_user(network->mru, user_arg))
+			break;
+		err = 0;
+		break;
+
+	case PPPIOCSMRU:
+		if (get_user(val, user_arg))
+			break;
+		if (val < PPP_MRU)
+			val = PPP_MRU;
+		network->mru = val;
+		err = 0;
+		break;
+
+	default:
+		err = -ENOTTY;
+	}
+
+	return err;
+}
+
+static const struct ppp_channel_ops ipwireless_ppp_channel_ops = {
+	.start_xmit = ipwireless_ppp_start_xmit,
+	.ioctl      = ipwireless_ppp_ioctl
+};
+
+static void do_go_online(struct work_struct *work_go_online)
+{
+	struct ipw_network *network =
+		container_of(work_go_online, struct ipw_network,
+				work_go_online);
+	unsigned long flags;
+
+	spin_lock_irqsave(&network->lock, flags);
+	if (!network->ppp_channel) {
+		struct ppp_channel *channel;
+
+		spin_unlock_irqrestore(&network->lock, flags);
+		channel = kzalloc(sizeof(struct ppp_channel), GFP_KERNEL);
+		if (!channel) {
+			printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+					": unable to allocate PPP channel\n");
+			return;
+		}
+		channel->private = network;
+		channel->mtu = 16384;	/* Wild guess */
+		channel->hdrlen = 2;
+		channel->ops = &ipwireless_ppp_channel_ops;
+
+		network->flags = 0;
+		network->rbits = 0;
+		network->mru = PPP_MRU;
+		memset(network->xaccm, 0, sizeof(network->xaccm));
+		network->xaccm[0] = ~0U;
+		network->xaccm[3] = 0x60000000U;
+		network->raccm = ~0U;
+		ppp_register_channel(channel);
+		spin_lock_irqsave(&network->lock, flags);
+		network->ppp_channel = channel;
+	}
+	spin_unlock_irqrestore(&network->lock, flags);
+}
+
+static void do_go_offline(struct work_struct *work_go_offline)
+{
+	struct ipw_network *network =
+		container_of(work_go_offline, struct ipw_network,
+				work_go_offline);
+	unsigned long flags;
+
+	mutex_lock(&network->close_lock);
+	spin_lock_irqsave(&network->lock, flags);
+	if (network->ppp_channel != NULL) {
+		struct ppp_channel *channel = network->ppp_channel;
+
+		network->ppp_channel = NULL;
+		spin_unlock_irqrestore(&network->lock, flags);
+		mutex_unlock(&network->close_lock);
+		ppp_unregister_channel(channel);
+	} else {
+		spin_unlock_irqrestore(&network->lock, flags);
+		mutex_unlock(&network->close_lock);
+	}
+}
+
+void ipwireless_network_notify_control_line_change(struct ipw_network *network,
+						   unsigned int channel_idx,
+						   unsigned int control_lines,
+						   unsigned int changed_mask)
+{
+	int i;
+
+	if (channel_idx == IPW_CHANNEL_RAS)
+		network->ras_control_lines = control_lines;
+
+	for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) {
+		struct ipw_tty *tty =
+			network->associated_ttys[channel_idx][i];
+
+		/*
+		 * If it's associated with a tty (other than the RAS channel
+		 * when we're online), then send the data to that tty.  The RAS
+		 * channel's data is handled above - it always goes through
+		 * ppp_generic.
+		 */
+		if (tty)
+			ipwireless_tty_notify_control_line_change(tty,
+								  channel_idx,
+								  control_lines,
+								  changed_mask);
+	}
+}
+
+/*
+ * Some versions of firmware stuff packets with 0xff 0x03 (PPP: ALLSTATIONS, UI)
+ * bytes, which are required on sent packet, but not always present on received
+ * packets
+ */
+static struct sk_buff *ipw_packet_received_skb(unsigned char *data,
+					       unsigned int length)
+{
+	struct sk_buff *skb;
+
+	if (length > 2 && data[0] == PPP_ALLSTATIONS && data[1] == PPP_UI) {
+		length -= 2;
+		data += 2;
+	}
+
+	skb = dev_alloc_skb(length + 4);
+	skb_reserve(skb, 2);
+	memcpy(skb_put(skb, length), data, length);
+
+	return skb;
+}
+
+void ipwireless_network_packet_received(struct ipw_network *network,
+					unsigned int channel_idx,
+					unsigned char *data,
+					unsigned int length)
+{
+	int i;
+	unsigned long flags;
+
+	for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) {
+		struct ipw_tty *tty = network->associated_ttys[channel_idx][i];
+
+		if (!tty)
+			continue;
+
+		/*
+		 * If it's associated with a tty (other than the RAS channel
+		 * when we're online), then send the data to that tty.  The RAS
+		 * channel's data is handled above - it always goes through
+		 * ppp_generic.
+		 */
+		if (channel_idx == IPW_CHANNEL_RAS
+				&& (network->ras_control_lines &
+					IPW_CONTROL_LINE_DCD) != 0
+				&& ipwireless_tty_is_modem(tty)) {
+			/*
+			 * If data came in on the RAS channel and this tty is
+			 * the modem tty, and we are online, then we send it to
+			 * the PPP layer.
+			 */
+			mutex_lock(&network->close_lock);
+			spin_lock_irqsave(&network->lock, flags);
+			if (network->ppp_channel != NULL) {
+				struct sk_buff *skb;
+
+				spin_unlock_irqrestore(&network->lock,
+						flags);
+
+				/* Send the data to the ppp_generic module. */
+				skb = ipw_packet_received_skb(data, length);
+				ppp_input(network->ppp_channel, skb);
+			} else
+				spin_unlock_irqrestore(&network->lock,
+						flags);
+			mutex_unlock(&network->close_lock);
+		}
+		/* Otherwise we send it out the tty. */
+		else
+			ipwireless_tty_received(tty, data, length);
+	}
+}
+
+struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw)
+{
+	struct ipw_network *network =
+		kzalloc(sizeof(struct ipw_network), GFP_ATOMIC);
+
+	if (!network)
+		return NULL;
+
+	spin_lock_init(&network->lock);
+	mutex_init(&network->close_lock);
+
+	network->hardware = hw;
+
+	INIT_WORK(&network->work_go_online, do_go_online);
+	INIT_WORK(&network->work_go_offline, do_go_offline);
+
+	ipwireless_associate_network(hw, network);
+
+	return network;
+}
+
+void ipwireless_network_free(struct ipw_network *network)
+{
+	network->shutting_down = 1;
+
+	ipwireless_ppp_close(network);
+	flush_work_sync(&network->work_go_online);
+	flush_work_sync(&network->work_go_offline);
+
+	ipwireless_stop_interrupts(network->hardware);
+	ipwireless_associate_network(network->hardware, NULL);
+
+	kfree(network);
+}
+
+void ipwireless_associate_network_tty(struct ipw_network *network,
+				      unsigned int channel_idx,
+				      struct ipw_tty *tty)
+{
+	int i;
+
+	for (i = 0; i < MAX_ASSOCIATED_TTYS; i++)
+		if (network->associated_ttys[channel_idx][i] == NULL) {
+			network->associated_ttys[channel_idx][i] = tty;
+			break;
+		}
+}
+
+void ipwireless_disassociate_network_ttys(struct ipw_network *network,
+					  unsigned int channel_idx)
+{
+	int i;
+
+	for (i = 0; i < MAX_ASSOCIATED_TTYS; i++)
+		network->associated_ttys[channel_idx][i] = NULL;
+}
+
+void ipwireless_ppp_open(struct ipw_network *network)
+{
+	if (ipwireless_debug)
+		printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": online\n");
+	schedule_work(&network->work_go_online);
+}
+
+void ipwireless_ppp_close(struct ipw_network *network)
+{
+	/* Disconnect from the wireless network. */
+	if (ipwireless_debug)
+		printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": offline\n");
+	schedule_work(&network->work_go_offline);
+}
+
+int ipwireless_ppp_channel_index(struct ipw_network *network)
+{
+	int ret = -1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&network->lock, flags);
+	if (network->ppp_channel != NULL)
+		ret = ppp_channel_index(network->ppp_channel);
+	spin_unlock_irqrestore(&network->lock, flags);
+
+	return ret;
+}
+
+int ipwireless_ppp_unit_number(struct ipw_network *network)
+{
+	int ret = -1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&network->lock, flags);
+	if (network->ppp_channel != NULL)
+		ret = ppp_unit_number(network->ppp_channel);
+	spin_unlock_irqrestore(&network->lock, flags);
+
+	return ret;
+}
+
+int ipwireless_ppp_mru(const struct ipw_network *network)
+{
+	return network->mru;
+}
diff --git a/drivers/tty/ipwireless/network.h b/drivers/tty/ipwireless/network.h
new file mode 100644
index 000000000000..561f765b3334
--- /dev/null
+++ b/drivers/tty/ipwireless/network.h
@@ -0,0 +1,53 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ *   by Stephen Blackheath <stephen@blacksapphire.com>,
+ *      Ben Martel <benm@symmetric.co.nz>
+ *
+ * Copyrighted as follows:
+ *   Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ *   Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ *   Copyright (C) 2007 David Sterba
+ */
+
+#ifndef _IPWIRELESS_CS_NETWORK_H_
+#define _IPWIRELESS_CS_NETWORK_H_
+
+#include <linux/types.h>
+
+struct ipw_network;
+struct ipw_tty;
+struct ipw_hardware;
+
+/* Definitions of the different channels on the PCMCIA UE */
+#define IPW_CHANNEL_RAS      0
+#define IPW_CHANNEL_DIALLER  1
+#define IPW_CHANNEL_CONSOLE  2
+#define NO_OF_IPW_CHANNELS   5
+
+void ipwireless_network_notify_control_line_change(struct ipw_network *net,
+		unsigned int channel_idx, unsigned int control_lines,
+		unsigned int control_mask);
+void ipwireless_network_packet_received(struct ipw_network *net,
+		unsigned int channel_idx, unsigned char *data,
+		unsigned int length);
+struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw);
+void ipwireless_network_free(struct ipw_network *net);
+void ipwireless_associate_network_tty(struct ipw_network *net,
+		unsigned int channel_idx, struct ipw_tty *tty);
+void ipwireless_disassociate_network_ttys(struct ipw_network *net,
+		unsigned int channel_idx);
+
+void ipwireless_ppp_open(struct ipw_network *net);
+
+void ipwireless_ppp_close(struct ipw_network *net);
+int ipwireless_ppp_channel_index(struct ipw_network *net);
+int ipwireless_ppp_unit_number(struct ipw_network *net);
+int ipwireless_ppp_mru(const struct ipw_network *net);
+
+#endif
diff --git a/drivers/tty/ipwireless/setup_protocol.h b/drivers/tty/ipwireless/setup_protocol.h
new file mode 100644
index 000000000000..9d6bcc77c73c
--- /dev/null
+++ b/drivers/tty/ipwireless/setup_protocol.h
@@ -0,0 +1,108 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ *   by Stephen Blackheath <stephen@blacksapphire.com>,
+ *      Ben Martel <benm@symmetric.co.nz>
+ *
+ * Copyrighted as follows:
+ *   Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ *   Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ *   Copyright (C) 2007 David Sterba
+ */
+
+#ifndef _IPWIRELESS_CS_SETUP_PROTOCOL_H_
+#define _IPWIRELESS_CS_SETUP_PROTOCOL_H_
+
+/* Version of the setup protocol and transport protocols */
+#define TL_SETUP_VERSION		1
+
+#define TL_SETUP_VERSION_QRY_TMO	1000
+#define TL_SETUP_MAX_VERSION_QRY	30
+
+/* Message numbers 0-9 are obsoleted and must not be reused! */
+#define TL_SETUP_SIGNO_GET_VERSION_QRY	10
+#define TL_SETUP_SIGNO_GET_VERSION_RSP	11
+#define TL_SETUP_SIGNO_CONFIG_MSG	12
+#define TL_SETUP_SIGNO_CONFIG_DONE_MSG	13
+#define TL_SETUP_SIGNO_OPEN_MSG		14
+#define TL_SETUP_SIGNO_CLOSE_MSG	15
+
+#define TL_SETUP_SIGNO_INFO_MSG     20
+#define TL_SETUP_SIGNO_INFO_MSG_ACK 21
+
+#define TL_SETUP_SIGNO_REBOOT_MSG      22
+#define TL_SETUP_SIGNO_REBOOT_MSG_ACK  23
+
+/* Synchronous start-messages */
+struct tl_setup_get_version_qry {
+	unsigned char sig_no;		/* TL_SETUP_SIGNO_GET_VERSION_QRY */
+} __attribute__ ((__packed__));
+
+struct tl_setup_get_version_rsp {
+	unsigned char sig_no;		/* TL_SETUP_SIGNO_GET_VERSION_RSP */
+	unsigned char version;		/* TL_SETUP_VERSION */
+} __attribute__ ((__packed__));
+
+struct tl_setup_config_msg {
+	unsigned char sig_no;		/* TL_SETUP_SIGNO_CONFIG_MSG */
+	unsigned char port_no;
+	unsigned char prio_data;
+	unsigned char prio_ctrl;
+} __attribute__ ((__packed__));
+
+struct tl_setup_config_done_msg {
+	unsigned char sig_no;		/* TL_SETUP_SIGNO_CONFIG_DONE_MSG */
+} __attribute__ ((__packed__));
+
+/* Asyncronous messages */
+struct tl_setup_open_msg {
+	unsigned char sig_no;		/* TL_SETUP_SIGNO_OPEN_MSG */
+	unsigned char port_no;
+} __attribute__ ((__packed__));
+
+struct tl_setup_close_msg {
+	unsigned char sig_no;		/* TL_SETUP_SIGNO_CLOSE_MSG */
+	unsigned char port_no;
+} __attribute__ ((__packed__));
+
+/* Driver type  - for use in tl_setup_info_msg.driver_type */
+#define COMM_DRIVER     0
+#define NDISWAN_DRIVER  1
+#define NDISWAN_DRIVER_MAJOR_VERSION  2
+#define NDISWAN_DRIVER_MINOR_VERSION  0
+
+/*
+ * It should not matter when this message comes over as we just store the
+ * results and send the ACK.
+ */
+struct tl_setup_info_msg {
+	unsigned char sig_no;		/* TL_SETUP_SIGNO_INFO_MSG */
+	unsigned char driver_type;
+	unsigned char major_version;
+	unsigned char minor_version;
+} __attribute__ ((__packed__));
+
+struct tl_setup_info_msgAck {
+	unsigned char sig_no;		/* TL_SETUP_SIGNO_INFO_MSG_ACK */
+} __attribute__ ((__packed__));
+
+struct TlSetupRebootMsgAck {
+	unsigned char sig_no;		/* TL_SETUP_SIGNO_REBOOT_MSG_ACK */
+} __attribute__ ((__packed__));
+
+/* Define a union of all the msgs that the driver can receive from the card.*/
+union ipw_setup_rx_msg {
+	unsigned char sig_no;
+	struct tl_setup_get_version_rsp version_rsp_msg;
+	struct tl_setup_open_msg open_msg;
+	struct tl_setup_close_msg close_msg;
+	struct tl_setup_info_msg InfoMsg;
+	struct tl_setup_info_msgAck info_msg_ack;
+} __attribute__ ((__packed__));
+
+#endif				/* _IPWIRELESS_CS_SETUP_PROTOCOL_H_ */
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
new file mode 100644
index 000000000000..ef92869502a7
--- /dev/null
+++ b/drivers/tty/ipwireless/tty.c
@@ -0,0 +1,679 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ *   by Stephen Blackheath <stephen@blacksapphire.com>,
+ *      Ben Martel <benm@symmetric.co.nz>
+ *
+ * Copyrighted as follows:
+ *   Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ *   Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ *   Copyright (C) 2007 David Sterba
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/ppp_defs.h>
+#include <linux/if.h>
+#include <linux/if_ppp.h>
+#include <linux/sched.h>
+#include <linux/serial.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/uaccess.h>
+
+#include "tty.h"
+#include "network.h"
+#include "hardware.h"
+#include "main.h"
+
+#define IPWIRELESS_PCMCIA_START 	(0)
+#define IPWIRELESS_PCMCIA_MINORS	(24)
+#define IPWIRELESS_PCMCIA_MINOR_RANGE	(8)
+
+#define TTYTYPE_MODEM    (0)
+#define TTYTYPE_MONITOR  (1)
+#define TTYTYPE_RAS_RAW  (2)
+
+struct ipw_tty {
+	int index;
+	struct ipw_hardware *hardware;
+	unsigned int channel_idx;
+	unsigned int secondary_channel_idx;
+	int tty_type;
+	struct ipw_network *network;
+	struct tty_struct *linux_tty;
+	int open_count;
+	unsigned int control_lines;
+	struct mutex ipw_tty_mutex;
+	int tx_bytes_queued;
+	int closing;
+};
+
+static struct ipw_tty *ttys[IPWIRELESS_PCMCIA_MINORS];
+
+static struct tty_driver *ipw_tty_driver;
+
+static char *tty_type_name(int tty_type)
+{
+	static char *channel_names[] = {
+		"modem",
+		"monitor",
+		"RAS-raw"
+	};
+
+	return channel_names[tty_type];
+}
+
+static void report_registering(struct ipw_tty *tty)
+{
+	char *iftype = tty_type_name(tty->tty_type);
+
+	printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+	       ": registering %s device ttyIPWp%d\n", iftype, tty->index);
+}
+
+static void report_deregistering(struct ipw_tty *tty)
+{
+	char *iftype = tty_type_name(tty->tty_type);
+
+	printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+	       ": deregistering %s device ttyIPWp%d\n", iftype,
+	       tty->index);
+}
+
+static struct ipw_tty *get_tty(int minor)
+{
+	if (minor < ipw_tty_driver->minor_start
+			|| minor >= ipw_tty_driver->minor_start +
+			IPWIRELESS_PCMCIA_MINORS)
+		return NULL;
+	else {
+		int minor_offset = minor - ipw_tty_driver->minor_start;
+
+		/*
+		 * The 'ras_raw' channel is only available when 'loopback' mode
+		 * is enabled.
+		 * Number of minor starts with 16 (_RANGE * _RAS_RAW).
+		 */
+		if (!ipwireless_loopback &&
+				minor_offset >=
+				 IPWIRELESS_PCMCIA_MINOR_RANGE * TTYTYPE_RAS_RAW)
+			return NULL;
+
+		return ttys[minor_offset];
+	}
+}
+
+static int ipw_open(struct tty_struct *linux_tty, struct file *filp)
+{
+	int minor = linux_tty->index;
+	struct ipw_tty *tty = get_tty(minor);
+
+	if (!tty)
+		return -ENODEV;
+
+	mutex_lock(&tty->ipw_tty_mutex);
+
+	if (tty->closing) {
+		mutex_unlock(&tty->ipw_tty_mutex);
+		return -ENODEV;
+	}
+	if (tty->open_count == 0)
+		tty->tx_bytes_queued = 0;
+
+	tty->open_count++;
+
+	tty->linux_tty = linux_tty;
+	linux_tty->driver_data = tty;
+	linux_tty->low_latency = 1;
+
+	if (tty->tty_type == TTYTYPE_MODEM)
+		ipwireless_ppp_open(tty->network);
+
+	mutex_unlock(&tty->ipw_tty_mutex);
+
+	return 0;
+}
+
+static void do_ipw_close(struct ipw_tty *tty)
+{
+	tty->open_count--;
+
+	if (tty->open_count == 0) {
+		struct tty_struct *linux_tty = tty->linux_tty;
+
+		if (linux_tty != NULL) {
+			tty->linux_tty = NULL;
+			linux_tty->driver_data = NULL;
+
+			if (tty->tty_type == TTYTYPE_MODEM)
+				ipwireless_ppp_close(tty->network);
+		}
+	}
+}
+
+static void ipw_hangup(struct tty_struct *linux_tty)
+{
+	struct ipw_tty *tty = linux_tty->driver_data;
+
+	if (!tty)
+		return;
+
+	mutex_lock(&tty->ipw_tty_mutex);
+	if (tty->open_count == 0) {
+		mutex_unlock(&tty->ipw_tty_mutex);
+		return;
+	}
+
+	do_ipw_close(tty);
+
+	mutex_unlock(&tty->ipw_tty_mutex);
+}
+
+static void ipw_close(struct tty_struct *linux_tty, struct file *filp)
+{
+	ipw_hangup(linux_tty);
+}
+
+/* Take data received from hardware, and send it out the tty */
+void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
+			unsigned int length)
+{
+	struct tty_struct *linux_tty;
+	int work = 0;
+
+	mutex_lock(&tty->ipw_tty_mutex);
+	linux_tty = tty->linux_tty;
+	if (linux_tty == NULL) {
+		mutex_unlock(&tty->ipw_tty_mutex);
+		return;
+	}
+
+	if (!tty->open_count) {
+		mutex_unlock(&tty->ipw_tty_mutex);
+		return;
+	}
+	mutex_unlock(&tty->ipw_tty_mutex);
+
+	work = tty_insert_flip_string(linux_tty, data, length);
+
+	if (work != length)
+		printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
+				": %d chars not inserted to flip buffer!\n",
+				length - work);
+
+	/*
+	 * This may sleep if ->low_latency is set
+	 */
+	if (work)
+		tty_flip_buffer_push(linux_tty);
+}
+
+static void ipw_write_packet_sent_callback(void *callback_data,
+					   unsigned int packet_length)
+{
+	struct ipw_tty *tty = callback_data;
+
+	/*
+	 * Packet has been sent, so we subtract the number of bytes from our
+	 * tally of outstanding TX bytes.
+	 */
+	tty->tx_bytes_queued -= packet_length;
+}
+
+static int ipw_write(struct tty_struct *linux_tty,
+		     const unsigned char *buf, int count)
+{
+	struct ipw_tty *tty = linux_tty->driver_data;
+	int room, ret;
+
+	if (!tty)
+		return -ENODEV;
+
+	mutex_lock(&tty->ipw_tty_mutex);
+	if (!tty->open_count) {
+		mutex_unlock(&tty->ipw_tty_mutex);
+		return -EINVAL;
+	}
+
+	room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued;
+	if (room < 0)
+		room = 0;
+	/* Don't allow caller to write any more than we have room for */
+	if (count > room)
+		count = room;
+
+	if (count == 0) {
+		mutex_unlock(&tty->ipw_tty_mutex);
+		return 0;
+	}
+
+	ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS,
+			       buf, count,
+			       ipw_write_packet_sent_callback, tty);
+	if (ret == -1) {
+		mutex_unlock(&tty->ipw_tty_mutex);
+		return 0;
+	}
+
+	tty->tx_bytes_queued += count;
+	mutex_unlock(&tty->ipw_tty_mutex);
+
+	return count;
+}
+
+static int ipw_write_room(struct tty_struct *linux_tty)
+{
+	struct ipw_tty *tty = linux_tty->driver_data;
+	int room;
+
+	/* FIXME: Exactly how is the tty object locked here .. */
+	if (!tty)
+		return -ENODEV;
+
+	if (!tty->open_count)
+		return -EINVAL;
+
+	room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued;
+	if (room < 0)
+		room = 0;
+
+	return room;
+}
+
+static int ipwireless_get_serial_info(struct ipw_tty *tty,
+				      struct serial_struct __user *retinfo)
+{
+	struct serial_struct tmp;
+
+	if (!retinfo)
+		return (-EFAULT);
+
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.type = PORT_UNKNOWN;
+	tmp.line = tty->index;
+	tmp.port = 0;
+	tmp.irq = 0;
+	tmp.flags = 0;
+	tmp.baud_base = 115200;
+	tmp.close_delay = 0;
+	tmp.closing_wait = 0;
+	tmp.custom_divisor = 0;
+	tmp.hub6 = 0;
+	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int ipw_chars_in_buffer(struct tty_struct *linux_tty)
+{
+	struct ipw_tty *tty = linux_tty->driver_data;
+
+	if (!tty)
+		return 0;
+
+	if (!tty->open_count)
+		return 0;
+
+	return tty->tx_bytes_queued;
+}
+
+static int get_control_lines(struct ipw_tty *tty)
+{
+	unsigned int my = tty->control_lines;
+	unsigned int out = 0;
+
+	if (my & IPW_CONTROL_LINE_RTS)
+		out |= TIOCM_RTS;
+	if (my & IPW_CONTROL_LINE_DTR)
+		out |= TIOCM_DTR;
+	if (my & IPW_CONTROL_LINE_CTS)
+		out |= TIOCM_CTS;
+	if (my & IPW_CONTROL_LINE_DSR)
+		out |= TIOCM_DSR;
+	if (my & IPW_CONTROL_LINE_DCD)
+		out |= TIOCM_CD;
+
+	return out;
+}
+
+static int set_control_lines(struct ipw_tty *tty, unsigned int set,
+			     unsigned int clear)
+{
+	int ret;
+
+	if (set & TIOCM_RTS) {
+		ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 1);
+		if (ret)
+			return ret;
+		if (tty->secondary_channel_idx != -1) {
+			ret = ipwireless_set_RTS(tty->hardware,
+					  tty->secondary_channel_idx, 1);
+			if (ret)
+				return ret;
+		}
+	}
+	if (set & TIOCM_DTR) {
+		ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 1);
+		if (ret)
+			return ret;
+		if (tty->secondary_channel_idx != -1) {
+			ret = ipwireless_set_DTR(tty->hardware,
+					  tty->secondary_channel_idx, 1);
+			if (ret)
+				return ret;
+		}
+	}
+	if (clear & TIOCM_RTS) {
+		ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 0);
+		if (tty->secondary_channel_idx != -1) {
+			ret = ipwireless_set_RTS(tty->hardware,
+					  tty->secondary_channel_idx, 0);
+			if (ret)
+				return ret;
+		}
+	}
+	if (clear & TIOCM_DTR) {
+		ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 0);
+		if (tty->secondary_channel_idx != -1) {
+			ret = ipwireless_set_DTR(tty->hardware,
+					  tty->secondary_channel_idx, 0);
+			if (ret)
+				return ret;
+		}
+	}
+	return 0;
+}
+
+static int ipw_tiocmget(struct tty_struct *linux_tty)
+{
+	struct ipw_tty *tty = linux_tty->driver_data;
+	/* FIXME: Exactly how is the tty object locked here .. */
+
+	if (!tty)
+		return -ENODEV;
+
+	if (!tty->open_count)
+		return -EINVAL;
+
+	return get_control_lines(tty);
+}
+
+static int
+ipw_tiocmset(struct tty_struct *linux_tty,
+	     unsigned int set, unsigned int clear)
+{
+	struct ipw_tty *tty = linux_tty->driver_data;
+	/* FIXME: Exactly how is the tty object locked here .. */
+
+	if (!tty)
+		return -ENODEV;
+
+	if (!tty->open_count)
+		return -EINVAL;
+
+	return set_control_lines(tty, set, clear);
+}
+
+static int ipw_ioctl(struct tty_struct *linux_tty,
+		     unsigned int cmd, unsigned long arg)
+{
+	struct ipw_tty *tty = linux_tty->driver_data;
+
+	if (!tty)
+		return -ENODEV;
+
+	if (!tty->open_count)
+		return -EINVAL;
+
+	/* FIXME: Exactly how is the tty object locked here .. */
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		return ipwireless_get_serial_info(tty, (void __user *) arg);
+
+	case TIOCSSERIAL:
+		return 0;	/* Keeps the PCMCIA scripts happy. */
+	}
+
+	if (tty->tty_type == TTYTYPE_MODEM) {
+		switch (cmd) {
+		case PPPIOCGCHAN:
+			{
+				int chan = ipwireless_ppp_channel_index(
+							tty->network);
+
+				if (chan < 0)
+					return -ENODEV;
+				if (put_user(chan, (int __user *) arg))
+					return -EFAULT;
+			}
+			return 0;
+
+		case PPPIOCGUNIT:
+			{
+				int unit = ipwireless_ppp_unit_number(
+						tty->network);
+
+				if (unit < 0)
+					return -ENODEV;
+				if (put_user(unit, (int __user *) arg))
+					return -EFAULT;
+			}
+			return 0;
+
+		case FIONREAD:
+			{
+				int val = 0;
+
+				if (put_user(val, (int __user *) arg))
+					return -EFAULT;
+			}
+			return 0;
+		case TCFLSH:
+			return tty_perform_flush(linux_tty, arg);
+		}
+	}
+	return -ENOIOCTLCMD;
+}
+
+static int add_tty(int j,
+		    struct ipw_hardware *hardware,
+		    struct ipw_network *network, int channel_idx,
+		    int secondary_channel_idx, int tty_type)
+{
+	ttys[j] = kzalloc(sizeof(struct ipw_tty), GFP_KERNEL);
+	if (!ttys[j])
+		return -ENOMEM;
+	ttys[j]->index = j;
+	ttys[j]->hardware = hardware;
+	ttys[j]->channel_idx = channel_idx;
+	ttys[j]->secondary_channel_idx = secondary_channel_idx;
+	ttys[j]->network = network;
+	ttys[j]->tty_type = tty_type;
+	mutex_init(&ttys[j]->ipw_tty_mutex);
+
+	tty_register_device(ipw_tty_driver, j, NULL);
+	ipwireless_associate_network_tty(network, channel_idx, ttys[j]);
+
+	if (secondary_channel_idx != -1)
+		ipwireless_associate_network_tty(network,
+						 secondary_channel_idx,
+						 ttys[j]);
+	if (get_tty(j + ipw_tty_driver->minor_start) == ttys[j])
+		report_registering(ttys[j]);
+	return 0;
+}
+
+struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hardware,
+				      struct ipw_network *network)
+{
+	int i, j;
+
+	for (i = 0; i < IPWIRELESS_PCMCIA_MINOR_RANGE; i++) {
+		int allfree = 1;
+
+		for (j = i; j < IPWIRELESS_PCMCIA_MINORS;
+				j += IPWIRELESS_PCMCIA_MINOR_RANGE)
+			if (ttys[j] != NULL) {
+				allfree = 0;
+				break;
+			}
+
+		if (allfree) {
+			j = i;
+
+			if (add_tty(j, hardware, network,
+					IPW_CHANNEL_DIALLER, IPW_CHANNEL_RAS,
+					TTYTYPE_MODEM))
+				return NULL;
+
+			j += IPWIRELESS_PCMCIA_MINOR_RANGE;
+			if (add_tty(j, hardware, network,
+					IPW_CHANNEL_DIALLER, -1,
+					TTYTYPE_MONITOR))
+				return NULL;
+
+			j += IPWIRELESS_PCMCIA_MINOR_RANGE;
+			if (add_tty(j, hardware, network,
+					IPW_CHANNEL_RAS, -1,
+					TTYTYPE_RAS_RAW))
+				return NULL;
+
+			return ttys[i];
+		}
+	}
+	return NULL;
+}
+
+/*
+ * Must be called before ipwireless_network_free().
+ */
+void ipwireless_tty_free(struct ipw_tty *tty)
+{
+	int j;
+	struct ipw_network *network = ttys[tty->index]->network;
+
+	for (j = tty->index; j < IPWIRELESS_PCMCIA_MINORS;
+			j += IPWIRELESS_PCMCIA_MINOR_RANGE) {
+		struct ipw_tty *ttyj = ttys[j];
+
+		if (ttyj) {
+			mutex_lock(&ttyj->ipw_tty_mutex);
+			if (get_tty(j + ipw_tty_driver->minor_start) == ttyj)
+				report_deregistering(ttyj);
+			ttyj->closing = 1;
+			if (ttyj->linux_tty != NULL) {
+				mutex_unlock(&ttyj->ipw_tty_mutex);
+				tty_hangup(ttyj->linux_tty);
+				/* Wait till the tty_hangup has completed */
+				flush_work_sync(&ttyj->linux_tty->hangup_work);
+				/* FIXME: Exactly how is the tty object locked here
+				   against a parallel ioctl etc */
+				mutex_lock(&ttyj->ipw_tty_mutex);
+			}
+			while (ttyj->open_count)
+				do_ipw_close(ttyj);
+			ipwireless_disassociate_network_ttys(network,
+							     ttyj->channel_idx);
+			tty_unregister_device(ipw_tty_driver, j);
+			ttys[j] = NULL;
+			mutex_unlock(&ttyj->ipw_tty_mutex);
+			kfree(ttyj);
+		}
+	}
+}
+
+static const struct tty_operations tty_ops = {
+	.open = ipw_open,
+	.close = ipw_close,
+	.hangup = ipw_hangup,
+	.write = ipw_write,
+	.write_room = ipw_write_room,
+	.ioctl = ipw_ioctl,
+	.chars_in_buffer = ipw_chars_in_buffer,
+	.tiocmget = ipw_tiocmget,
+	.tiocmset = ipw_tiocmset,
+};
+
+int ipwireless_tty_init(void)
+{
+	int result;
+
+	ipw_tty_driver = alloc_tty_driver(IPWIRELESS_PCMCIA_MINORS);
+	if (!ipw_tty_driver)
+		return -ENOMEM;
+
+	ipw_tty_driver->owner = THIS_MODULE;
+	ipw_tty_driver->driver_name = IPWIRELESS_PCCARD_NAME;
+	ipw_tty_driver->name = "ttyIPWp";
+	ipw_tty_driver->major = 0;
+	ipw_tty_driver->minor_start = IPWIRELESS_PCMCIA_START;
+	ipw_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	ipw_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+	ipw_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	ipw_tty_driver->init_termios = tty_std_termios;
+	ipw_tty_driver->init_termios.c_cflag =
+	    B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	ipw_tty_driver->init_termios.c_ispeed = 9600;
+	ipw_tty_driver->init_termios.c_ospeed = 9600;
+	tty_set_operations(ipw_tty_driver, &tty_ops);
+	result = tty_register_driver(ipw_tty_driver);
+	if (result) {
+		printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+		       ": failed to register tty driver\n");
+		put_tty_driver(ipw_tty_driver);
+		return result;
+	}
+
+	return 0;
+}
+
+void ipwireless_tty_release(void)
+{
+	int ret;
+
+	ret = tty_unregister_driver(ipw_tty_driver);
+	put_tty_driver(ipw_tty_driver);
+	if (ret != 0)
+		printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+			": tty_unregister_driver failed with code %d\n", ret);
+}
+
+int ipwireless_tty_is_modem(struct ipw_tty *tty)
+{
+	return tty->tty_type == TTYTYPE_MODEM;
+}
+
+void
+ipwireless_tty_notify_control_line_change(struct ipw_tty *tty,
+					  unsigned int channel_idx,
+					  unsigned int control_lines,
+					  unsigned int changed_mask)
+{
+	unsigned int old_control_lines = tty->control_lines;
+
+	tty->control_lines = (tty->control_lines & ~changed_mask)
+		| (control_lines & changed_mask);
+
+	/*
+	 * If DCD is de-asserted, we close the tty so pppd can tell that we
+	 * have gone offline.
+	 */
+	if ((old_control_lines & IPW_CONTROL_LINE_DCD)
+			&& !(tty->control_lines & IPW_CONTROL_LINE_DCD)
+			&& tty->linux_tty) {
+		tty_hangup(tty->linux_tty);
+	}
+}
+
diff --git a/drivers/tty/ipwireless/tty.h b/drivers/tty/ipwireless/tty.h
new file mode 100644
index 000000000000..747b2d637860
--- /dev/null
+++ b/drivers/tty/ipwireless/tty.h
@@ -0,0 +1,45 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ *   by Stephen Blackheath <stephen@blacksapphire.com>,
+ *      Ben Martel <benm@symmetric.co.nz>
+ *
+ * Copyrighted as follows:
+ *   Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ *   Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ *   Copyright (C) 2007 David Sterba
+ */
+
+#ifndef _IPWIRELESS_CS_TTY_H_
+#define _IPWIRELESS_CS_TTY_H_
+
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+struct ipw_tty;
+struct ipw_network;
+struct ipw_hardware;
+
+int ipwireless_tty_init(void);
+void ipwireless_tty_release(void);
+
+struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hw,
+				      struct ipw_network *net);
+void ipwireless_tty_free(struct ipw_tty *tty);
+void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
+			     unsigned int length);
+int ipwireless_tty_is_modem(struct ipw_tty *tty);
+void ipwireless_tty_notify_control_line_change(struct ipw_tty *tty,
+					       unsigned int channel_idx,
+					       unsigned int control_lines,
+					       unsigned int changed_mask);
+
+#endif
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
new file mode 100644
index 000000000000..db1cf9c328d8
--- /dev/null
+++ b/drivers/tty/isicom.c
@@ -0,0 +1,1736 @@
+/*
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Original driver code supplied by Multi-Tech
+ *
+ *	Changes
+ *	1/9/98	alan@lxorguk.ukuu.org.uk
+ *					Merge to 2.0.x kernel tree
+ *					Obtain and use official major/minors
+ *					Loader switched to a misc device
+ *					(fixed range check bug as a side effect)
+ *					Printk clean up
+ *	9/12/98	alan@lxorguk.ukuu.org.uk
+ *					Rough port to 2.1.x
+ *
+ *	10/6/99 sameer			Merged the ISA and PCI drivers to
+ *					a new unified driver.
+ *
+ *	3/9/99	sameer			Added support for ISI4616 cards.
+ *
+ *	16/9/99	sameer			We do not force RTS low anymore.
+ *					This is to prevent the firmware
+ *					from getting confused.
+ *
+ *	26/10/99 sameer			Cosmetic changes:The driver now
+ *					dumps the Port Count information
+ *					along with I/O address and IRQ.
+ *
+ *	13/12/99 sameer			Fixed the problem with IRQ sharing.
+ *
+ *	10/5/00  sameer			Fixed isicom_shutdown_board()
+ *					to not lower DTR on all the ports
+ *					when the last port on the card is
+ *					closed.
+ *
+ *	10/5/00  sameer			Signal mask setup command added
+ *					to  isicom_setup_port and
+ *					isicom_shutdown_port.
+ *
+ *	24/5/00  sameer			The driver is now SMP aware.
+ *
+ *
+ *	27/11/00 Vinayak P Risbud	Fixed the Driver Crash Problem
+ *
+ *
+ *	03/01/01  anil .s		Added support for resetting the
+ *					internal modems on ISI cards.
+ *
+ *	08/02/01  anil .s		Upgraded the driver for kernel
+ *					2.4.x
+ *
+ *	11/04/01  Kevin			Fixed firmware load problem with
+ *					ISIHP-4X card
+ *
+ *	30/04/01  anil .s		Fixed the remote login through
+ *					ISI port problem. Now the link
+ *					does not go down before password
+ *					prompt.
+ *
+ *	03/05/01  anil .s		Fixed the problem with IRQ sharing
+ *					among ISI-PCI cards.
+ *
+ *	03/05/01  anil .s		Added support to display the version
+ *					info during insmod as well as module
+ *					listing by lsmod.
+ *
+ *	10/05/01  anil .s		Done the modifications to the source
+ *					file and Install script so that the
+ *					same installation can be used for
+ *					2.2.x and 2.4.x kernel.
+ *
+ *	06/06/01  anil .s		Now we drop both dtr and rts during
+ *					shutdown_port as well as raise them
+ *					during isicom_config_port.
+ *
+ *	09/06/01 acme@conectiva.com.br	use capable, not suser, do
+ *					restore_flags on failure in
+ *					isicom_send_break, verify put_user
+ *					result
+ *
+ *	11/02/03  ranjeeth		Added support for 230 Kbps and 460 Kbps
+ *					Baud index extended to 21
+ *
+ *	20/03/03  ranjeeth		Made to work for Linux Advanced server.
+ *					Taken care of license warning.
+ *
+ *	10/12/03  Ravindra		Made to work for Fedora Core 1 of
+ *					Red Hat Distribution
+ *
+ *	06/01/05  Alan Cox 		Merged the ISI and base kernel strands
+ *					into a single 2.6 driver
+ *
+ *	***********************************************************
+ *
+ *	To use this driver you also need the support package. You
+ *	can find this in RPM format on
+ *		ftp://ftp.linux.org.uk/pub/linux/alan
+ *
+ *	You can find the original tools for this direct from Multitech
+ *		ftp://ftp.multitech.com/ISI-Cards/
+ *
+ *	Having installed the cards the module options (/etc/modprobe.conf)
+ *
+ *	options isicom   io=card1,card2,card3,card4 irq=card1,card2,card3,card4
+ *
+ *	Omit those entries for boards you don't have installed.
+ *
+ *	TODO
+ *		Merge testing
+ *		64-bit verification
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/termios.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/serial.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <asm/system.h>
+
+#include <linux/pci.h>
+
+#include <linux/isicom.h>
+
+#define InterruptTheCard(base) outw(0, (base) + 0xc)
+#define ClearInterrupt(base) inw((base) + 0x0a)
+
+#ifdef DEBUG
+#define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c))
+#else
+#define isicom_paranoia_check(a, b, c) 0
+#endif
+
+static int isicom_probe(struct pci_dev *, const struct pci_device_id *);
+static void __devexit isicom_remove(struct pci_dev *);
+
+static struct pci_device_id isicom_pci_tbl[] = {
+	{ PCI_DEVICE(VENDOR_ID, 0x2028) },
+	{ PCI_DEVICE(VENDOR_ID, 0x2051) },
+	{ PCI_DEVICE(VENDOR_ID, 0x2052) },
+	{ PCI_DEVICE(VENDOR_ID, 0x2053) },
+	{ PCI_DEVICE(VENDOR_ID, 0x2054) },
+	{ PCI_DEVICE(VENDOR_ID, 0x2055) },
+	{ PCI_DEVICE(VENDOR_ID, 0x2056) },
+	{ PCI_DEVICE(VENDOR_ID, 0x2057) },
+	{ PCI_DEVICE(VENDOR_ID, 0x2058) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, isicom_pci_tbl);
+
+static struct pci_driver isicom_driver = {
+	.name		= "isicom",
+	.id_table	= isicom_pci_tbl,
+	.probe		= isicom_probe,
+	.remove		= __devexit_p(isicom_remove)
+};
+
+static int prev_card = 3;	/*	start servicing isi_card[0]	*/
+static struct tty_driver *isicom_normal;
+
+static void isicom_tx(unsigned long _data);
+static void isicom_start(struct tty_struct *tty);
+
+static DEFINE_TIMER(tx, isicom_tx, 0, 0);
+
+/*   baud index mappings from linux defns to isi */
+
+static signed char linuxb_to_isib[] = {
+	-1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19, 20, 21
+};
+
+struct	isi_board {
+	unsigned long		base;
+	int			irq;
+	unsigned char		port_count;
+	unsigned short		status;
+	unsigned short		port_status; /* each bit for each port */
+	unsigned short		shift_count;
+	struct isi_port		*ports;
+	signed char		count;
+	spinlock_t		card_lock; /* Card wide lock 11/5/00 -sameer */
+	unsigned long		flags;
+	unsigned int		index;
+};
+
+struct	isi_port {
+	unsigned short		magic;
+	struct tty_port		port;
+	u16			channel;
+	u16			status;
+	struct isi_board	*card;
+	unsigned char		*xmit_buf;
+	int			xmit_head;
+	int			xmit_tail;
+	int			xmit_cnt;
+};
+
+static struct isi_board isi_card[BOARD_COUNT];
+static struct isi_port  isi_ports[PORT_COUNT];
+
+/*
+ *	Locking functions for card level locking. We need to own both
+ *	the kernel lock for the card and have the card in a position that
+ *	it wants to talk.
+ */
+
+static inline int WaitTillCardIsFree(unsigned long base)
+{
+	unsigned int count = 0;
+	unsigned int a = in_atomic(); /* do we run under spinlock? */
+
+	while (!(inw(base + 0xe) & 0x1) && count++ < 100)
+		if (a)
+			mdelay(1);
+		else
+			msleep(1);
+
+	return !(inw(base + 0xe) & 0x1);
+}
+
+static int lock_card(struct isi_board *card)
+{
+	unsigned long base = card->base;
+	unsigned int retries, a;
+
+	for (retries = 0; retries < 10; retries++) {
+		spin_lock_irqsave(&card->card_lock, card->flags);
+		for (a = 0; a < 10; a++) {
+			if (inw(base + 0xe) & 0x1)
+				return 1;
+			udelay(10);
+		}
+		spin_unlock_irqrestore(&card->card_lock, card->flags);
+		msleep(10);
+	}
+	pr_warning("Failed to lock Card (0x%lx)\n", card->base);
+
+	return 0;	/* Failed to acquire the card! */
+}
+
+static void unlock_card(struct isi_board *card)
+{
+	spin_unlock_irqrestore(&card->card_lock, card->flags);
+}
+
+/*
+ *  ISI Card specific ops ...
+ */
+
+/* card->lock HAS to be held */
+static void raise_dtr(struct isi_port *port)
+{
+	struct isi_board *card = port->card;
+	unsigned long base = card->base;
+	u16 channel = port->channel;
+
+	if (WaitTillCardIsFree(base))
+		return;
+
+	outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+	outw(0x0504, base);
+	InterruptTheCard(base);
+	port->status |= ISI_DTR;
+}
+
+/* card->lock HAS to be held */
+static inline void drop_dtr(struct isi_port *port)
+{
+	struct isi_board *card = port->card;
+	unsigned long base = card->base;
+	u16 channel = port->channel;
+
+	if (WaitTillCardIsFree(base))
+		return;
+
+	outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+	outw(0x0404, base);
+	InterruptTheCard(base);
+	port->status &= ~ISI_DTR;
+}
+
+/* card->lock HAS to be held */
+static inline void raise_rts(struct isi_port *port)
+{
+	struct isi_board *card = port->card;
+	unsigned long base = card->base;
+	u16 channel = port->channel;
+
+	if (WaitTillCardIsFree(base))
+		return;
+
+	outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+	outw(0x0a04, base);
+	InterruptTheCard(base);
+	port->status |= ISI_RTS;
+}
+
+/* card->lock HAS to be held */
+static inline void drop_rts(struct isi_port *port)
+{
+	struct isi_board *card = port->card;
+	unsigned long base = card->base;
+	u16 channel = port->channel;
+
+	if (WaitTillCardIsFree(base))
+		return;
+
+	outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+	outw(0x0804, base);
+	InterruptTheCard(base);
+	port->status &= ~ISI_RTS;
+}
+
+/* card->lock MUST NOT be held */
+
+static void isicom_dtr_rts(struct tty_port *port, int on)
+{
+	struct isi_port *ip = container_of(port, struct isi_port, port);
+	struct isi_board *card = ip->card;
+	unsigned long base = card->base;
+	u16 channel = ip->channel;
+
+	if (!lock_card(card))
+		return;
+
+	if (on) {
+		outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+		outw(0x0f04, base);
+		InterruptTheCard(base);
+		ip->status |= (ISI_DTR | ISI_RTS);
+	} else {
+		outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+		outw(0x0C04, base);
+		InterruptTheCard(base);
+		ip->status &= ~(ISI_DTR | ISI_RTS);
+	}
+	unlock_card(card);
+}
+
+/* card->lock HAS to be held */
+static void drop_dtr_rts(struct isi_port *port)
+{
+	struct isi_board *card = port->card;
+	unsigned long base = card->base;
+	u16 channel = port->channel;
+
+	if (WaitTillCardIsFree(base))
+		return;
+
+	outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+	outw(0x0c04, base);
+	InterruptTheCard(base);
+	port->status &= ~(ISI_RTS | ISI_DTR);
+}
+
+/*
+ *	ISICOM Driver specific routines ...
+ *
+ */
+
+static inline int __isicom_paranoia_check(struct isi_port const *port,
+	char *name, const char *routine)
+{
+	if (!port) {
+		pr_warning("Warning: bad isicom magic for dev %s in %s.\n",
+			   name, routine);
+		return 1;
+	}
+	if (port->magic != ISICOM_MAGIC) {
+		pr_warning("Warning: NULL isicom port for dev %s in %s.\n",
+			   name, routine);
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ *	Transmitter.
+ *
+ *	We shovel data into the card buffers on a regular basis. The card
+ *	will do the rest of the work for us.
+ */
+
+static void isicom_tx(unsigned long _data)
+{
+	unsigned long flags, base;
+	unsigned int retries;
+	short count = (BOARD_COUNT-1), card;
+	short txcount, wrd, residue, word_count, cnt;
+	struct isi_port *port;
+	struct tty_struct *tty;
+
+	/*	find next active board	*/
+	card = (prev_card + 1) & 0x0003;
+	while (count-- > 0) {
+		if (isi_card[card].status & BOARD_ACTIVE)
+			break;
+		card = (card + 1) & 0x0003;
+	}
+	if (!(isi_card[card].status & BOARD_ACTIVE))
+		goto sched_again;
+
+	prev_card = card;
+
+	count = isi_card[card].port_count;
+	port = isi_card[card].ports;
+	base = isi_card[card].base;
+
+	spin_lock_irqsave(&isi_card[card].card_lock, flags);
+	for (retries = 0; retries < 100; retries++) {
+		if (inw(base + 0xe) & 0x1)
+			break;
+		udelay(2);
+	}
+	if (retries >= 100)
+		goto unlock;
+
+	tty = tty_port_tty_get(&port->port);
+	if (tty == NULL)
+		goto put_unlock;
+
+	for (; count > 0; count--, port++) {
+		/* port not active or tx disabled to force flow control */
+		if (!(port->port.flags & ASYNC_INITIALIZED) ||
+				!(port->status & ISI_TXOK))
+			continue;
+
+		txcount = min_t(short, TX_SIZE, port->xmit_cnt);
+		if (txcount <= 0 || tty->stopped || tty->hw_stopped)
+			continue;
+
+		if (!(inw(base + 0x02) & (1 << port->channel)))
+			continue;
+
+		pr_debug("txing %d bytes, port%d.\n",
+			 txcount, port->channel + 1);
+		outw((port->channel << isi_card[card].shift_count) | txcount,
+			base);
+		residue = NO;
+		wrd = 0;
+		while (1) {
+			cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE
+					- port->xmit_tail));
+			if (residue == YES) {
+				residue = NO;
+				if (cnt > 0) {
+					wrd |= (port->port.xmit_buf[port->xmit_tail]
+									<< 8);
+					port->xmit_tail = (port->xmit_tail + 1)
+						& (SERIAL_XMIT_SIZE - 1);
+					port->xmit_cnt--;
+					txcount--;
+					cnt--;
+					outw(wrd, base);
+				} else {
+					outw(wrd, base);
+					break;
+				}
+			}
+			if (cnt <= 0)
+				break;
+			word_count = cnt >> 1;
+			outsw(base, port->port.xmit_buf+port->xmit_tail, word_count);
+			port->xmit_tail = (port->xmit_tail
+				+ (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
+			txcount -= (word_count << 1);
+			port->xmit_cnt -= (word_count << 1);
+			if (cnt & 0x0001) {
+				residue = YES;
+				wrd = port->port.xmit_buf[port->xmit_tail];
+				port->xmit_tail = (port->xmit_tail + 1)
+					& (SERIAL_XMIT_SIZE - 1);
+				port->xmit_cnt--;
+				txcount--;
+			}
+		}
+
+		InterruptTheCard(base);
+		if (port->xmit_cnt <= 0)
+			port->status &= ~ISI_TXOK;
+		if (port->xmit_cnt <= WAKEUP_CHARS)
+			tty_wakeup(tty);
+	}
+
+put_unlock:
+	tty_kref_put(tty);
+unlock:
+	spin_unlock_irqrestore(&isi_card[card].card_lock, flags);
+	/*	schedule another tx for hopefully in about 10ms	*/
+sched_again:
+	mod_timer(&tx, jiffies + msecs_to_jiffies(10));
+}
+
+/*
+ *	Main interrupt handler routine
+ */
+
+static irqreturn_t isicom_interrupt(int irq, void *dev_id)
+{
+	struct isi_board *card = dev_id;
+	struct isi_port *port;
+	struct tty_struct *tty;
+	unsigned long base;
+	u16 header, word_count, count, channel;
+	short byte_count;
+	unsigned char *rp;
+
+	if (!card || !(card->status & FIRMWARE_LOADED))
+		return IRQ_NONE;
+
+	base = card->base;
+
+	/* did the card interrupt us? */
+	if (!(inw(base + 0x0e) & 0x02))
+		return IRQ_NONE;
+
+	spin_lock(&card->card_lock);
+
+	/*
+	 * disable any interrupts from the PCI card and lower the
+	 * interrupt line
+	 */
+	outw(0x8000, base+0x04);
+	ClearInterrupt(base);
+
+	inw(base);		/* get the dummy word out */
+	header = inw(base);
+	channel = (header & 0x7800) >> card->shift_count;
+	byte_count = header & 0xff;
+
+	if (channel + 1 > card->port_count) {
+		pr_warning("%s(0x%lx): %d(channel) > port_count.\n",
+			   __func__, base, channel+1);
+		outw(0x0000, base+0x04); /* enable interrupts */
+		spin_unlock(&card->card_lock);
+		return IRQ_HANDLED;
+	}
+	port = card->ports + channel;
+	if (!(port->port.flags & ASYNC_INITIALIZED)) {
+		outw(0x0000, base+0x04); /* enable interrupts */
+		spin_unlock(&card->card_lock);
+		return IRQ_HANDLED;
+	}
+
+	tty = tty_port_tty_get(&port->port);
+	if (tty == NULL) {
+		word_count = byte_count >> 1;
+		while (byte_count > 1) {
+			inw(base);
+			byte_count -= 2;
+		}
+		if (byte_count & 0x01)
+			inw(base);
+		outw(0x0000, base+0x04); /* enable interrupts */
+		spin_unlock(&card->card_lock);
+		return IRQ_HANDLED;
+	}
+
+	if (header & 0x8000) {		/* Status Packet */
+		header = inw(base);
+		switch (header & 0xff) {
+		case 0:	/* Change in EIA signals */
+			if (port->port.flags & ASYNC_CHECK_CD) {
+				if (port->status & ISI_DCD) {
+					if (!(header & ISI_DCD)) {
+					/* Carrier has been lost  */
+						pr_debug("%s: DCD->low.\n",
+							 __func__);
+						port->status &= ~ISI_DCD;
+						tty_hangup(tty);
+					}
+				} else if (header & ISI_DCD) {
+				/* Carrier has been detected */
+					pr_debug("%s: DCD->high.\n",
+						__func__);
+					port->status |= ISI_DCD;
+					wake_up_interruptible(&port->port.open_wait);
+				}
+			} else {
+				if (header & ISI_DCD)
+					port->status |= ISI_DCD;
+				else
+					port->status &= ~ISI_DCD;
+			}
+
+			if (port->port.flags & ASYNC_CTS_FLOW) {
+				if (tty->hw_stopped) {
+					if (header & ISI_CTS) {
+						port->port.tty->hw_stopped = 0;
+						/* start tx ing */
+						port->status |= (ISI_TXOK
+							| ISI_CTS);
+						tty_wakeup(tty);
+					}
+				} else if (!(header & ISI_CTS)) {
+					tty->hw_stopped = 1;
+					/* stop tx ing */
+					port->status &= ~(ISI_TXOK | ISI_CTS);
+				}
+			} else {
+				if (header & ISI_CTS)
+					port->status |= ISI_CTS;
+				else
+					port->status &= ~ISI_CTS;
+			}
+
+			if (header & ISI_DSR)
+				port->status |= ISI_DSR;
+			else
+				port->status &= ~ISI_DSR;
+
+			if (header & ISI_RI)
+				port->status |= ISI_RI;
+			else
+				port->status &= ~ISI_RI;
+
+			break;
+
+		case 1:	/* Received Break !!! */
+			tty_insert_flip_char(tty, 0, TTY_BREAK);
+			if (port->port.flags & ASYNC_SAK)
+				do_SAK(tty);
+			tty_flip_buffer_push(tty);
+			break;
+
+		case 2:	/* Statistics		 */
+			pr_debug("%s: stats!!!\n", __func__);
+			break;
+
+		default:
+			pr_debug("%s: Unknown code in status packet.\n",
+				 __func__);
+			break;
+		}
+	} else {				/* Data   Packet */
+
+		count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
+		pr_debug("%s: Can rx %d of %d bytes.\n",
+			 __func__, count, byte_count);
+		word_count = count >> 1;
+		insw(base, rp, word_count);
+		byte_count -= (word_count << 1);
+		if (count & 0x0001) {
+			tty_insert_flip_char(tty,  inw(base) & 0xff,
+				TTY_NORMAL);
+			byte_count -= 2;
+		}
+		if (byte_count > 0) {
+			pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n",
+				 __func__, base, channel + 1);
+		/* drain out unread xtra data */
+		while (byte_count > 0) {
+				inw(base);
+				byte_count -= 2;
+			}
+		}
+		tty_flip_buffer_push(tty);
+	}
+	outw(0x0000, base+0x04); /* enable interrupts */
+	spin_unlock(&card->card_lock);
+	tty_kref_put(tty);
+
+	return IRQ_HANDLED;
+}
+
+static void isicom_config_port(struct tty_struct *tty)
+{
+	struct isi_port *port = tty->driver_data;
+	struct isi_board *card = port->card;
+	unsigned long baud;
+	unsigned long base = card->base;
+	u16 channel_setup, channel = port->channel,
+		shift_count = card->shift_count;
+	unsigned char flow_ctrl;
+
+	/* FIXME: Switch to new tty baud API */
+	baud = C_BAUD(tty);
+	if (baud & CBAUDEX) {
+		baud &= ~CBAUDEX;
+
+		/*  if CBAUDEX bit is on and the baud is set to either 50 or 75
+		 *  then the card is programmed for 57.6Kbps or 115Kbps
+		 *  respectively.
+		 */
+
+		/* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
+		if (baud < 1 || baud > 4)
+			tty->termios->c_cflag &= ~CBAUDEX;
+		else
+			baud += 15;
+	}
+	if (baud == 15) {
+
+		/*  the ASYNC_SPD_HI and ASYNC_SPD_VHI options are set
+		 *  by the set_serial_info ioctl ... this is done by
+		 *  the 'setserial' utility.
+		 */
+
+		if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+			baud++; /*  57.6 Kbps */
+		if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+			baud += 2; /*  115  Kbps */
+		if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+			baud += 3; /* 230 kbps*/
+		if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+			baud += 4; /* 460 kbps*/
+	}
+	if (linuxb_to_isib[baud] == -1) {
+		/* hang up */
+		drop_dtr(port);
+		return;
+	} else
+		raise_dtr(port);
+
+	if (WaitTillCardIsFree(base) == 0) {
+		outw(0x8000 | (channel << shift_count) | 0x03, base);
+		outw(linuxb_to_isib[baud] << 8 | 0x03, base);
+		channel_setup = 0;
+		switch (C_CSIZE(tty)) {
+		case CS5:
+			channel_setup |= ISICOM_CS5;
+			break;
+		case CS6:
+			channel_setup |= ISICOM_CS6;
+			break;
+		case CS7:
+			channel_setup |= ISICOM_CS7;
+			break;
+		case CS8:
+			channel_setup |= ISICOM_CS8;
+			break;
+		}
+
+		if (C_CSTOPB(tty))
+			channel_setup |= ISICOM_2SB;
+		if (C_PARENB(tty)) {
+			channel_setup |= ISICOM_EVPAR;
+			if (C_PARODD(tty))
+				channel_setup |= ISICOM_ODPAR;
+		}
+		outw(channel_setup, base);
+		InterruptTheCard(base);
+	}
+	if (C_CLOCAL(tty))
+		port->port.flags &= ~ASYNC_CHECK_CD;
+	else
+		port->port.flags |= ASYNC_CHECK_CD;
+
+	/* flow control settings ...*/
+	flow_ctrl = 0;
+	port->port.flags &= ~ASYNC_CTS_FLOW;
+	if (C_CRTSCTS(tty)) {
+		port->port.flags |= ASYNC_CTS_FLOW;
+		flow_ctrl |= ISICOM_CTSRTS;
+	}
+	if (I_IXON(tty))
+		flow_ctrl |= ISICOM_RESPOND_XONXOFF;
+	if (I_IXOFF(tty))
+		flow_ctrl |= ISICOM_INITIATE_XONXOFF;
+
+	if (WaitTillCardIsFree(base) == 0) {
+		outw(0x8000 | (channel << shift_count) | 0x04, base);
+		outw(flow_ctrl << 8 | 0x05, base);
+		outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base);
+		InterruptTheCard(base);
+	}
+
+	/*	rx enabled -> enable port for rx on the card	*/
+	if (C_CREAD(tty)) {
+		card->port_status |= (1 << channel);
+		outw(card->port_status, base + 0x02);
+	}
+}
+
+/* open et all */
+
+static inline void isicom_setup_board(struct isi_board *bp)
+{
+	int channel;
+	struct isi_port *port;
+
+	bp->count++;
+	if (!(bp->status & BOARD_INIT)) {
+		port = bp->ports;
+		for (channel = 0; channel < bp->port_count; channel++, port++)
+			drop_dtr_rts(port);
+	}
+	bp->status |= BOARD_ACTIVE | BOARD_INIT;
+}
+
+/* Activate and thus setup board are protected from races against shutdown
+   by the tty_port mutex */
+
+static int isicom_activate(struct tty_port *tport, struct tty_struct *tty)
+{
+	struct isi_port *port = container_of(tport, struct isi_port, port);
+	struct isi_board *card = port->card;
+	unsigned long flags;
+
+	if (tty_port_alloc_xmit_buf(tport) < 0)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&card->card_lock, flags);
+	isicom_setup_board(card);
+
+	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
+
+	/*	discard any residual data	*/
+	if (WaitTillCardIsFree(card->base) == 0) {
+		outw(0x8000 | (port->channel << card->shift_count) | 0x02,
+				card->base);
+		outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base);
+		InterruptTheCard(card->base);
+	}
+	isicom_config_port(tty);
+	spin_unlock_irqrestore(&card->card_lock, flags);
+
+	return 0;
+}
+
+static int isicom_carrier_raised(struct tty_port *port)
+{
+	struct isi_port *ip = container_of(port, struct isi_port, port);
+	return (ip->status & ISI_DCD)?1 : 0;
+}
+
+static struct tty_port *isicom_find_port(struct tty_struct *tty)
+{
+	struct isi_port *port;
+	struct isi_board *card;
+	unsigned int board;
+	int line = tty->index;
+
+	if (line < 0 || line > PORT_COUNT-1)
+		return NULL;
+	board = BOARD(line);
+	card = &isi_card[board];
+
+	if (!(card->status & FIRMWARE_LOADED))
+		return NULL;
+
+	/*  open on a port greater than the port count for the card !!! */
+	if (line > ((board * 16) + card->port_count - 1))
+		return NULL;
+
+	port = &isi_ports[line];
+	if (isicom_paranoia_check(port, tty->name, "isicom_open"))
+		return NULL;
+
+	return &port->port;
+}
+
+static int isicom_open(struct tty_struct *tty, struct file *filp)
+{
+	struct isi_port *port;
+	struct tty_port *tport;
+
+	tport = isicom_find_port(tty);
+	if (tport == NULL)
+		return -ENODEV;
+	port = container_of(tport, struct isi_port, port);
+
+	tty->driver_data = port;
+	return tty_port_open(tport, tty, filp);
+}
+
+/* close et all */
+
+/* card->lock HAS to be held */
+static void isicom_shutdown_port(struct isi_port *port)
+{
+	struct isi_board *card = port->card;
+
+	if (--card->count < 0) {
+		pr_debug("%s: bad board(0x%lx) count %d.\n",
+			 __func__, card->base, card->count);
+		card->count = 0;
+	}
+	/* last port was closed, shutdown that board too */
+	if (!card->count)
+		card->status &= BOARD_ACTIVE;
+}
+
+static void isicom_flush_buffer(struct tty_struct *tty)
+{
+	struct isi_port *port = tty->driver_data;
+	struct isi_board *card = port->card;
+	unsigned long flags;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer"))
+		return;
+
+	spin_lock_irqsave(&card->card_lock, flags);
+	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
+	spin_unlock_irqrestore(&card->card_lock, flags);
+
+	tty_wakeup(tty);
+}
+
+static void isicom_shutdown(struct tty_port *port)
+{
+	struct isi_port *ip = container_of(port, struct isi_port, port);
+	struct isi_board *card = ip->card;
+	unsigned long flags;
+
+	/* indicate to the card that no more data can be received
+	   on this port */
+	spin_lock_irqsave(&card->card_lock, flags);
+	card->port_status &= ~(1 << ip->channel);
+	outw(card->port_status, card->base + 0x02);
+	isicom_shutdown_port(ip);
+	spin_unlock_irqrestore(&card->card_lock, flags);
+	tty_port_free_xmit_buf(port);
+}
+
+static void isicom_close(struct tty_struct *tty, struct file *filp)
+{
+	struct isi_port *ip = tty->driver_data;
+	struct tty_port *port;
+
+	if (ip == NULL)
+		return;
+
+	port = &ip->port;
+	if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
+		return;
+	tty_port_close(port, tty, filp);
+}
+
+/* write et all */
+static int isicom_write(struct tty_struct *tty,	const unsigned char *buf,
+	int count)
+{
+	struct isi_port *port = tty->driver_data;
+	struct isi_board *card = port->card;
+	unsigned long flags;
+	int cnt, total = 0;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_write"))
+		return 0;
+
+	spin_lock_irqsave(&card->card_lock, flags);
+
+	while (1) {
+		cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt
+				- 1, SERIAL_XMIT_SIZE - port->xmit_head));
+		if (cnt <= 0)
+			break;
+
+		memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt);
+		port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE
+			- 1);
+		port->xmit_cnt += cnt;
+		buf += cnt;
+		count -= cnt;
+		total += cnt;
+	}
+	if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped)
+		port->status |= ISI_TXOK;
+	spin_unlock_irqrestore(&card->card_lock, flags);
+	return total;
+}
+
+/* put_char et all */
+static int isicom_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct isi_port *port = tty->driver_data;
+	struct isi_board *card = port->card;
+	unsigned long flags;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
+		return 0;
+
+	spin_lock_irqsave(&card->card_lock, flags);
+	if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
+		spin_unlock_irqrestore(&card->card_lock, flags);
+		return 0;
+	}
+
+	port->port.xmit_buf[port->xmit_head++] = ch;
+	port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
+	port->xmit_cnt++;
+	spin_unlock_irqrestore(&card->card_lock, flags);
+	return 1;
+}
+
+/* flush_chars et all */
+static void isicom_flush_chars(struct tty_struct *tty)
+{
+	struct isi_port *port = tty->driver_data;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars"))
+		return;
+
+	if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
+			!port->port.xmit_buf)
+		return;
+
+	/* this tells the transmitter to consider this port for
+	   data output to the card ... that's the best we can do. */
+	port->status |= ISI_TXOK;
+}
+
+/* write_room et all */
+static int isicom_write_room(struct tty_struct *tty)
+{
+	struct isi_port *port = tty->driver_data;
+	int free;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_write_room"))
+		return 0;
+
+	free = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
+	if (free < 0)
+		free = 0;
+	return free;
+}
+
+/* chars_in_buffer et all */
+static int isicom_chars_in_buffer(struct tty_struct *tty)
+{
+	struct isi_port *port = tty->driver_data;
+	if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer"))
+		return 0;
+	return port->xmit_cnt;
+}
+
+/* ioctl et all */
+static int isicom_send_break(struct tty_struct *tty, int length)
+{
+	struct isi_port *port = tty->driver_data;
+	struct isi_board *card = port->card;
+	unsigned long base = card->base;
+
+	if (length == -1)
+		return -EOPNOTSUPP;
+
+	if (!lock_card(card))
+		return -EINVAL;
+
+	outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base);
+	outw((length & 0xff) << 8 | 0x00, base);
+	outw((length & 0xff00), base);
+	InterruptTheCard(base);
+
+	unlock_card(card);
+	return 0;
+}
+
+static int isicom_tiocmget(struct tty_struct *tty)
+{
+	struct isi_port *port = tty->driver_data;
+	/* just send the port status */
+	u16 status = port->status;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
+		return -ENODEV;
+
+	return  ((status & ISI_RTS) ? TIOCM_RTS : 0) |
+		((status & ISI_DTR) ? TIOCM_DTR : 0) |
+		((status & ISI_DCD) ? TIOCM_CAR : 0) |
+		((status & ISI_DSR) ? TIOCM_DSR : 0) |
+		((status & ISI_CTS) ? TIOCM_CTS : 0) |
+		((status & ISI_RI ) ? TIOCM_RI  : 0);
+}
+
+static int isicom_tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear)
+{
+	struct isi_port *port = tty->driver_data;
+	unsigned long flags;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
+		return -ENODEV;
+
+	spin_lock_irqsave(&port->card->card_lock, flags);
+	if (set & TIOCM_RTS)
+		raise_rts(port);
+	if (set & TIOCM_DTR)
+		raise_dtr(port);
+
+	if (clear & TIOCM_RTS)
+		drop_rts(port);
+	if (clear & TIOCM_DTR)
+		drop_dtr(port);
+	spin_unlock_irqrestore(&port->card->card_lock, flags);
+
+	return 0;
+}
+
+static int isicom_set_serial_info(struct tty_struct *tty,
+					struct serial_struct __user *info)
+{
+	struct isi_port *port = tty->driver_data;
+	struct serial_struct newinfo;
+	int reconfig_port;
+
+	if (copy_from_user(&newinfo, info, sizeof(newinfo)))
+		return -EFAULT;
+
+	mutex_lock(&port->port.mutex);
+	reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) !=
+		(newinfo.flags & ASYNC_SPD_MASK));
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((newinfo.close_delay != port->port.close_delay) ||
+				(newinfo.closing_wait != port->port.closing_wait) ||
+				((newinfo.flags & ~ASYNC_USR_MASK) !=
+				(port->port.flags & ~ASYNC_USR_MASK))) {
+			mutex_unlock(&port->port.mutex);
+			return -EPERM;
+		}
+		port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
+				(newinfo.flags & ASYNC_USR_MASK));
+	} else {
+		port->port.close_delay = newinfo.close_delay;
+		port->port.closing_wait = newinfo.closing_wait;
+		port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
+				(newinfo.flags & ASYNC_FLAGS));
+	}
+	if (reconfig_port) {
+		unsigned long flags;
+		spin_lock_irqsave(&port->card->card_lock, flags);
+		isicom_config_port(tty);
+		spin_unlock_irqrestore(&port->card->card_lock, flags);
+	}
+	mutex_unlock(&port->port.mutex);
+	return 0;
+}
+
+static int isicom_get_serial_info(struct isi_port *port,
+	struct serial_struct __user *info)
+{
+	struct serial_struct out_info;
+
+	mutex_lock(&port->port.mutex);
+	memset(&out_info, 0, sizeof(out_info));
+/*	out_info.type = ? */
+	out_info.line = port - isi_ports;
+	out_info.port = port->card->base;
+	out_info.irq = port->card->irq;
+	out_info.flags = port->port.flags;
+/*	out_info.baud_base = ? */
+	out_info.close_delay = port->port.close_delay;
+	out_info.closing_wait = port->port.closing_wait;
+	mutex_unlock(&port->port.mutex);
+	if (copy_to_user(info, &out_info, sizeof(out_info)))
+		return -EFAULT;
+	return 0;
+}
+
+static int isicom_ioctl(struct tty_struct *tty,
+	unsigned int cmd, unsigned long arg)
+{
+	struct isi_port *port = tty->driver_data;
+	void __user *argp = (void __user *)arg;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
+		return -ENODEV;
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		return isicom_get_serial_info(port, argp);
+
+	case TIOCSSERIAL:
+		return isicom_set_serial_info(tty, argp);
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+/* set_termios et all */
+static void isicom_set_termios(struct tty_struct *tty,
+	struct ktermios *old_termios)
+{
+	struct isi_port *port = tty->driver_data;
+	unsigned long flags;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
+		return;
+
+	if (tty->termios->c_cflag == old_termios->c_cflag &&
+			tty->termios->c_iflag == old_termios->c_iflag)
+		return;
+
+	spin_lock_irqsave(&port->card->card_lock, flags);
+	isicom_config_port(tty);
+	spin_unlock_irqrestore(&port->card->card_lock, flags);
+
+	if ((old_termios->c_cflag & CRTSCTS) &&
+			!(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		isicom_start(tty);
+	}
+}
+
+/* throttle et all */
+static void isicom_throttle(struct tty_struct *tty)
+{
+	struct isi_port *port = tty->driver_data;
+	struct isi_board *card = port->card;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_throttle"))
+		return;
+
+	/* tell the card that this port cannot handle any more data for now */
+	card->port_status &= ~(1 << port->channel);
+	outw(card->port_status, card->base + 0x02);
+}
+
+/* unthrottle et all */
+static void isicom_unthrottle(struct tty_struct *tty)
+{
+	struct isi_port *port = tty->driver_data;
+	struct isi_board *card = port->card;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle"))
+		return;
+
+	/* tell the card that this port is ready to accept more data */
+	card->port_status |= (1 << port->channel);
+	outw(card->port_status, card->base + 0x02);
+}
+
+/* stop et all */
+static void isicom_stop(struct tty_struct *tty)
+{
+	struct isi_port *port = tty->driver_data;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_stop"))
+		return;
+
+	/* this tells the transmitter not to consider this port for
+	   data output to the card. */
+	port->status &= ~ISI_TXOK;
+}
+
+/* start et all */
+static void isicom_start(struct tty_struct *tty)
+{
+	struct isi_port *port = tty->driver_data;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_start"))
+		return;
+
+	/* this tells the transmitter to consider this port for
+	   data output to the card. */
+	port->status |= ISI_TXOK;
+}
+
+static void isicom_hangup(struct tty_struct *tty)
+{
+	struct isi_port *port = tty->driver_data;
+
+	if (isicom_paranoia_check(port, tty->name, "isicom_hangup"))
+		return;
+	tty_port_hangup(&port->port);
+}
+
+
+/*
+ * Driver init and deinit functions
+ */
+
+static const struct tty_operations isicom_ops = {
+	.open			= isicom_open,
+	.close			= isicom_close,
+	.write			= isicom_write,
+	.put_char		= isicom_put_char,
+	.flush_chars		= isicom_flush_chars,
+	.write_room		= isicom_write_room,
+	.chars_in_buffer	= isicom_chars_in_buffer,
+	.ioctl			= isicom_ioctl,
+	.set_termios		= isicom_set_termios,
+	.throttle		= isicom_throttle,
+	.unthrottle		= isicom_unthrottle,
+	.stop			= isicom_stop,
+	.start			= isicom_start,
+	.hangup			= isicom_hangup,
+	.flush_buffer		= isicom_flush_buffer,
+	.tiocmget		= isicom_tiocmget,
+	.tiocmset		= isicom_tiocmset,
+	.break_ctl		= isicom_send_break,
+};
+
+static const struct tty_port_operations isicom_port_ops = {
+	.carrier_raised		= isicom_carrier_raised,
+	.dtr_rts		= isicom_dtr_rts,
+	.activate		= isicom_activate,
+	.shutdown		= isicom_shutdown,
+};
+
+static int __devinit reset_card(struct pci_dev *pdev,
+	const unsigned int card, unsigned int *signature)
+{
+	struct isi_board *board = pci_get_drvdata(pdev);
+	unsigned long base = board->base;
+	unsigned int sig, portcount = 0;
+	int retval = 0;
+
+	dev_dbg(&pdev->dev, "ISILoad:Resetting Card%d at 0x%lx\n", card + 1,
+		base);
+
+	inw(base + 0x8);
+
+	msleep(10);
+
+	outw(0, base + 0x8); /* Reset */
+
+	msleep(1000);
+
+	sig = inw(base + 0x4) & 0xff;
+
+	if (sig != 0xa5 && sig != 0xbb && sig != 0xcc && sig != 0xdd &&
+			sig != 0xee) {
+		dev_warn(&pdev->dev, "ISILoad:Card%u reset failure (Possible "
+			"bad I/O Port Address 0x%lx).\n", card + 1, base);
+		dev_dbg(&pdev->dev, "Sig=0x%x\n", sig);
+		retval = -EIO;
+		goto end;
+	}
+
+	msleep(10);
+
+	portcount = inw(base + 0x2);
+	if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 &&
+				portcount != 8 && portcount != 16)) {
+		dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n",
+			card + 1);
+		retval = -EIO;
+		goto end;
+	}
+
+	switch (sig) {
+	case 0xa5:
+	case 0xbb:
+	case 0xdd:
+		board->port_count = (portcount == 4) ? 4 : 8;
+		board->shift_count = 12;
+		break;
+	case 0xcc:
+	case 0xee:
+		board->port_count = 16;
+		board->shift_count = 11;
+		break;
+	}
+	dev_info(&pdev->dev, "-Done\n");
+	*signature = sig;
+
+end:
+	return retval;
+}
+
+static int __devinit load_firmware(struct pci_dev *pdev,
+	const unsigned int index, const unsigned int signature)
+{
+	struct isi_board *board = pci_get_drvdata(pdev);
+	const struct firmware *fw;
+	unsigned long base = board->base;
+	unsigned int a;
+	u16 word_count, status;
+	int retval = -EIO;
+	char *name;
+	u8 *data;
+
+	struct stframe {
+		u16	addr;
+		u16	count;
+		u8	data[0];
+	} *frame;
+
+	switch (signature) {
+	case 0xa5:
+		name = "isi608.bin";
+		break;
+	case 0xbb:
+		name = "isi608em.bin";
+		break;
+	case 0xcc:
+		name = "isi616em.bin";
+		break;
+	case 0xdd:
+		name = "isi4608.bin";
+		break;
+	case 0xee:
+		name = "isi4616.bin";
+		break;
+	default:
+		dev_err(&pdev->dev, "Unknown signature.\n");
+		goto end;
+	}
+
+	retval = request_firmware(&fw, name, &pdev->dev);
+	if (retval)
+		goto end;
+
+	retval = -EIO;
+
+	for (frame = (struct stframe *)fw->data;
+			frame < (struct stframe *)(fw->data + fw->size);
+			frame = (struct stframe *)((u8 *)(frame + 1) +
+				frame->count)) {
+		if (WaitTillCardIsFree(base))
+			goto errrelfw;
+
+		outw(0xf0, base);	/* start upload sequence */
+		outw(0x00, base);
+		outw(frame->addr, base); /* lsb of address */
+
+		word_count = frame->count / 2 + frame->count % 2;
+		outw(word_count, base);
+		InterruptTheCard(base);
+
+		udelay(100); /* 0x2f */
+
+		if (WaitTillCardIsFree(base))
+			goto errrelfw;
+
+		status = inw(base + 0x4);
+		if (status != 0) {
+			dev_warn(&pdev->dev, "Card%d rejected load header:\n"
+				 "Address:0x%x\n"
+				 "Count:0x%x\n"
+				 "Status:0x%x\n",
+				 index + 1, frame->addr, frame->count, status);
+			goto errrelfw;
+		}
+		outsw(base, frame->data, word_count);
+
+		InterruptTheCard(base);
+
+		udelay(50); /* 0x0f */
+
+		if (WaitTillCardIsFree(base))
+			goto errrelfw;
+
+		status = inw(base + 0x4);
+		if (status != 0) {
+			dev_err(&pdev->dev, "Card%d got out of sync.Card "
+				"Status:0x%x\n", index + 1, status);
+			goto errrelfw;
+		}
+	}
+
+/* XXX: should we test it by reading it back and comparing with original like
+ * in load firmware package? */
+	for (frame = (struct stframe *)fw->data;
+			frame < (struct stframe *)(fw->data + fw->size);
+			frame = (struct stframe *)((u8 *)(frame + 1) +
+				frame->count)) {
+		if (WaitTillCardIsFree(base))
+			goto errrelfw;
+
+		outw(0xf1, base); /* start download sequence */
+		outw(0x00, base);
+		outw(frame->addr, base); /* lsb of address */
+
+		word_count = (frame->count >> 1) + frame->count % 2;
+		outw(word_count + 1, base);
+		InterruptTheCard(base);
+
+		udelay(50); /* 0xf */
+
+		if (WaitTillCardIsFree(base))
+			goto errrelfw;
+
+		status = inw(base + 0x4);
+		if (status != 0) {
+			dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
+				 "Address:0x%x\n"
+				 "Count:0x%x\n"
+				 "Status: 0x%x\n",
+				 index + 1, frame->addr, frame->count, status);
+			goto errrelfw;
+		}
+
+		data = kmalloc(word_count * 2, GFP_KERNEL);
+		if (data == NULL) {
+			dev_err(&pdev->dev, "Card%d, firmware upload "
+				"failed, not enough memory\n", index + 1);
+			goto errrelfw;
+		}
+		inw(base);
+		insw(base, data, word_count);
+		InterruptTheCard(base);
+
+		for (a = 0; a < frame->count; a++)
+			if (data[a] != frame->data[a]) {
+				kfree(data);
+				dev_err(&pdev->dev, "Card%d, firmware upload "
+					"failed\n", index + 1);
+				goto errrelfw;
+			}
+		kfree(data);
+
+		udelay(50); /* 0xf */
+
+		if (WaitTillCardIsFree(base))
+			goto errrelfw;
+
+		status = inw(base + 0x4);
+		if (status != 0) {
+			dev_err(&pdev->dev, "Card%d verify got out of sync. "
+				"Card Status:0x%x\n", index + 1, status);
+			goto errrelfw;
+		}
+	}
+
+	/* xfer ctrl */
+	if (WaitTillCardIsFree(base))
+		goto errrelfw;
+
+	outw(0xf2, base);
+	outw(0x800, base);
+	outw(0x0, base);
+	outw(0x0, base);
+	InterruptTheCard(base);
+	outw(0x0, base + 0x4); /* for ISI4608 cards */
+
+	board->status |= FIRMWARE_LOADED;
+	retval = 0;
+
+errrelfw:
+	release_firmware(fw);
+end:
+	return retval;
+}
+
+/*
+ *	Insmod can set static symbols so keep these static
+ */
+static unsigned int card_count;
+
+static int __devinit isicom_probe(struct pci_dev *pdev,
+	const struct pci_device_id *ent)
+{
+	unsigned int uninitialized_var(signature), index;
+	int retval = -EPERM;
+	struct isi_board *board = NULL;
+
+	if (card_count >= BOARD_COUNT)
+		goto err;
+
+	retval = pci_enable_device(pdev);
+	if (retval) {
+		dev_err(&pdev->dev, "failed to enable\n");
+		goto err;
+	}
+
+	dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device);
+
+	/* allot the first empty slot in the array */
+	for (index = 0; index < BOARD_COUNT; index++) {
+		if (isi_card[index].base == 0) {
+			board = &isi_card[index];
+			break;
+		}
+	}
+	if (index == BOARD_COUNT) {
+		retval = -ENODEV;
+		goto err_disable;
+	}
+
+	board->index = index;
+	board->base = pci_resource_start(pdev, 3);
+	board->irq = pdev->irq;
+	card_count++;
+
+	pci_set_drvdata(pdev, board);
+
+	retval = pci_request_region(pdev, 3, ISICOM_NAME);
+	if (retval) {
+		dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
+			"will be disabled.\n", board->base, board->base + 15,
+			index + 1);
+		retval = -EBUSY;
+		goto errdec;
+	}
+
+	retval = request_irq(board->irq, isicom_interrupt,
+			IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board);
+	if (retval < 0) {
+		dev_err(&pdev->dev, "Could not install handler at Irq %d. "
+			"Card%d will be disabled.\n", board->irq, index + 1);
+		goto errunrr;
+	}
+
+	retval = reset_card(pdev, index, &signature);
+	if (retval < 0)
+		goto errunri;
+
+	retval = load_firmware(pdev, index, signature);
+	if (retval < 0)
+		goto errunri;
+
+	for (index = 0; index < board->port_count; index++)
+		tty_register_device(isicom_normal, board->index * 16 + index,
+				&pdev->dev);
+
+	return 0;
+
+errunri:
+	free_irq(board->irq, board);
+errunrr:
+	pci_release_region(pdev, 3);
+errdec:
+	board->base = 0;
+	card_count--;
+err_disable:
+	pci_disable_device(pdev);
+err:
+	return retval;
+}
+
+static void __devexit isicom_remove(struct pci_dev *pdev)
+{
+	struct isi_board *board = pci_get_drvdata(pdev);
+	unsigned int i;
+
+	for (i = 0; i < board->port_count; i++)
+		tty_unregister_device(isicom_normal, board->index * 16 + i);
+
+	free_irq(board->irq, board);
+	pci_release_region(pdev, 3);
+	board->base = 0;
+	card_count--;
+	pci_disable_device(pdev);
+}
+
+static int __init isicom_init(void)
+{
+	int retval, idx, channel;
+	struct isi_port *port;
+
+	for (idx = 0; idx < BOARD_COUNT; idx++) {
+		port = &isi_ports[idx * 16];
+		isi_card[idx].ports = port;
+		spin_lock_init(&isi_card[idx].card_lock);
+		for (channel = 0; channel < 16; channel++, port++) {
+			tty_port_init(&port->port);
+			port->port.ops = &isicom_port_ops;
+			port->magic = ISICOM_MAGIC;
+			port->card = &isi_card[idx];
+			port->channel = channel;
+			port->port.close_delay = 50 * HZ/100;
+			port->port.closing_wait = 3000 * HZ/100;
+			port->status = 0;
+			/*  . . .  */
+		}
+		isi_card[idx].base = 0;
+		isi_card[idx].irq = 0;
+	}
+
+	/* tty driver structure initialization */
+	isicom_normal = alloc_tty_driver(PORT_COUNT);
+	if (!isicom_normal) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	isicom_normal->owner			= THIS_MODULE;
+	isicom_normal->name 			= "ttyM";
+	isicom_normal->major			= ISICOM_NMAJOR;
+	isicom_normal->minor_start		= 0;
+	isicom_normal->type			= TTY_DRIVER_TYPE_SERIAL;
+	isicom_normal->subtype			= SERIAL_TYPE_NORMAL;
+	isicom_normal->init_termios		= tty_std_termios;
+	isicom_normal->init_termios.c_cflag	= B9600 | CS8 | CREAD | HUPCL |
+		CLOCAL;
+	isicom_normal->flags			= TTY_DRIVER_REAL_RAW |
+		TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK;
+	tty_set_operations(isicom_normal, &isicom_ops);
+
+	retval = tty_register_driver(isicom_normal);
+	if (retval) {
+		pr_debug("Couldn't register the dialin driver\n");
+		goto err_puttty;
+	}
+
+	retval = pci_register_driver(&isicom_driver);
+	if (retval < 0) {
+		pr_err("Unable to register pci driver.\n");
+		goto err_unrtty;
+	}
+
+	mod_timer(&tx, jiffies + 1);
+
+	return 0;
+err_unrtty:
+	tty_unregister_driver(isicom_normal);
+err_puttty:
+	put_tty_driver(isicom_normal);
+error:
+	return retval;
+}
+
+static void __exit isicom_exit(void)
+{
+	del_timer_sync(&tx);
+
+	pci_unregister_driver(&isicom_driver);
+	tty_unregister_driver(isicom_normal);
+	put_tty_driver(isicom_normal);
+}
+
+module_init(isicom_init);
+module_exit(isicom_exit);
+
+MODULE_AUTHOR("MultiTech");
+MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("isi608.bin");
+MODULE_FIRMWARE("isi608em.bin");
+MODULE_FIRMWARE("isi616em.bin");
+MODULE_FIRMWARE("isi4608.bin");
+MODULE_FIRMWARE("isi4616.bin");
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
new file mode 100644
index 000000000000..35b0c38590e6
--- /dev/null
+++ b/drivers/tty/moxa.c
@@ -0,0 +1,2092 @@
+/*****************************************************************************/
+/*
+ *           moxa.c  -- MOXA Intellio family multiport serial driver.
+ *
+ *      Copyright (C) 1999-2000  Moxa Technologies (support@moxa.com).
+ *      Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ *
+ *      This code is loosely based on the Linux serial driver, written by
+ *      Linus Torvalds, Theodore T'so and others.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ */
+
+/*
+ *    MOXA Intellio Series Driver
+ *      for             : LINUX
+ *      date            : 1999/1/7
+ *      version         : 5.1
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/firmware.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/serial.h>
+#include <linux/tty_driver.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include "moxa.h"
+
+#define MOXA_VERSION		"6.0k"
+
+#define MOXA_FW_HDRLEN		32
+
+#define MOXAMAJOR		172
+
+#define MAX_BOARDS		4	/* Don't change this value */
+#define MAX_PORTS_PER_BOARD	32	/* Don't change this value */
+#define MAX_PORTS		(MAX_BOARDS * MAX_PORTS_PER_BOARD)
+
+#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \
+		(brd)->boardType == MOXA_BOARD_C320_PCI)
+
+/*
+ *    Define the Moxa PCI vendor and device IDs.
+ */
+#define MOXA_BUS_TYPE_ISA	0
+#define MOXA_BUS_TYPE_PCI	1
+
+enum {
+	MOXA_BOARD_C218_PCI = 1,
+	MOXA_BOARD_C218_ISA,
+	MOXA_BOARD_C320_PCI,
+	MOXA_BOARD_C320_ISA,
+	MOXA_BOARD_CP204J,
+};
+
+static char *moxa_brdname[] =
+{
+	"C218 Turbo PCI series",
+	"C218 Turbo ISA series",
+	"C320 Turbo PCI series",
+	"C320 Turbo ISA series",
+	"CP-204J series",
+};
+
+#ifdef CONFIG_PCI
+static struct pci_device_id moxa_pcibrds[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
+		.driver_data = MOXA_BOARD_C218_PCI },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
+		.driver_data = MOXA_BOARD_C320_PCI },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J),
+		.driver_data = MOXA_BOARD_CP204J },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
+#endif /* CONFIG_PCI */
+
+struct moxa_port;
+
+static struct moxa_board_conf {
+	int boardType;
+	int numPorts;
+	int busType;
+
+	unsigned int ready;
+
+	struct moxa_port *ports;
+
+	void __iomem *basemem;
+	void __iomem *intNdx;
+	void __iomem *intPend;
+	void __iomem *intTable;
+} moxa_boards[MAX_BOARDS];
+
+struct mxser_mstatus {
+	tcflag_t cflag;
+	int cts;
+	int dsr;
+	int ri;
+	int dcd;
+};
+
+struct moxaq_str {
+	int inq;
+	int outq;
+};
+
+struct moxa_port {
+	struct tty_port port;
+	struct moxa_board_conf *board;
+	void __iomem *tableAddr;
+
+	int type;
+	int cflag;
+	unsigned long statusflags;
+
+	u8 DCDState;		/* Protected by the port lock */
+	u8 lineCtrl;
+	u8 lowChkFlag;
+};
+
+struct mon_str {
+	int tick;
+	int rxcnt[MAX_PORTS];
+	int txcnt[MAX_PORTS];
+};
+
+/* statusflags */
+#define TXSTOPPED	1
+#define LOWWAIT 	2
+#define EMPTYWAIT	3
+
+#define SERIAL_DO_RESTART
+
+#define WAKEUP_CHARS		256
+
+static int ttymajor = MOXAMAJOR;
+static struct mon_str moxaLog;
+static unsigned int moxaFuncTout = HZ / 2;
+static unsigned int moxaLowWaterChk;
+static DEFINE_MUTEX(moxa_openlock);
+static DEFINE_SPINLOCK(moxa_lock);
+
+static unsigned long baseaddr[MAX_BOARDS];
+static unsigned int type[MAX_BOARDS];
+static unsigned int numports[MAX_BOARDS];
+
+MODULE_AUTHOR("William Chen");
+MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("c218tunx.cod");
+MODULE_FIRMWARE("cp204unx.cod");
+MODULE_FIRMWARE("c320tunx.cod");
+
+module_param_array(type, uint, NULL, 0);
+MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
+module_param_array(baseaddr, ulong, NULL, 0);
+MODULE_PARM_DESC(baseaddr, "base address");
+module_param_array(numports, uint, NULL, 0);
+MODULE_PARM_DESC(numports, "numports (ignored for C218)");
+
+module_param(ttymajor, int, 0);
+
+/*
+ * static functions:
+ */
+static int moxa_open(struct tty_struct *, struct file *);
+static void moxa_close(struct tty_struct *, struct file *);
+static int moxa_write(struct tty_struct *, const unsigned char *, int);
+static int moxa_write_room(struct tty_struct *);
+static void moxa_flush_buffer(struct tty_struct *);
+static int moxa_chars_in_buffer(struct tty_struct *);
+static void moxa_set_termios(struct tty_struct *, struct ktermios *);
+static void moxa_stop(struct tty_struct *);
+static void moxa_start(struct tty_struct *);
+static void moxa_hangup(struct tty_struct *);
+static int moxa_tiocmget(struct tty_struct *tty);
+static int moxa_tiocmset(struct tty_struct *tty,
+			 unsigned int set, unsigned int clear);
+static void moxa_poll(unsigned long);
+static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
+static void moxa_shutdown(struct tty_port *);
+static int moxa_carrier_raised(struct tty_port *);
+static void moxa_dtr_rts(struct tty_port *, int);
+/*
+ * moxa board interface functions:
+ */
+static void MoxaPortEnable(struct moxa_port *);
+static void MoxaPortDisable(struct moxa_port *);
+static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
+static int MoxaPortGetLineOut(struct moxa_port *, int *, int *);
+static void MoxaPortLineCtrl(struct moxa_port *, int, int);
+static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
+static int MoxaPortLineStatus(struct moxa_port *);
+static void MoxaPortFlushData(struct moxa_port *, int);
+static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
+static int MoxaPortReadData(struct moxa_port *);
+static int MoxaPortTxQueue(struct moxa_port *);
+static int MoxaPortRxQueue(struct moxa_port *);
+static int MoxaPortTxFree(struct moxa_port *);
+static void MoxaPortTxDisable(struct moxa_port *);
+static void MoxaPortTxEnable(struct moxa_port *);
+static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *);
+static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *);
+static void MoxaSetFifo(struct moxa_port *port, int enable);
+
+/*
+ * I/O functions
+ */
+
+static DEFINE_SPINLOCK(moxafunc_lock);
+
+static void moxa_wait_finish(void __iomem *ofsAddr)
+{
+	unsigned long end = jiffies + moxaFuncTout;
+
+	while (readw(ofsAddr + FuncCode) != 0)
+		if (time_after(jiffies, end))
+			return;
+	if (readw(ofsAddr + FuncCode) != 0 && printk_ratelimit())
+		printk(KERN_WARNING "moxa function expired\n");
+}
+
+static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&moxafunc_lock, flags);
+	writew(arg, ofsAddr + FuncArg);
+	writew(cmd, ofsAddr + FuncCode);
+	moxa_wait_finish(ofsAddr);
+	spin_unlock_irqrestore(&moxafunc_lock, flags);
+}
+
+static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg)
+{
+        unsigned long flags;
+        u16 ret;
+        spin_lock_irqsave(&moxafunc_lock, flags);
+	writew(arg, ofsAddr + FuncArg);
+	writew(cmd, ofsAddr + FuncCode);
+	moxa_wait_finish(ofsAddr);
+	ret = readw(ofsAddr + FuncArg);
+	spin_unlock_irqrestore(&moxafunc_lock, flags);
+	return ret;
+}
+
+static void moxa_low_water_check(void __iomem *ofsAddr)
+{
+	u16 rptr, wptr, mask, len;
+
+	if (readb(ofsAddr + FlagStat) & Xoff_state) {
+		rptr = readw(ofsAddr + RXrptr);
+		wptr = readw(ofsAddr + RXwptr);
+		mask = readw(ofsAddr + RX_mask);
+		len = (wptr - rptr) & mask;
+		if (len <= Low_water)
+			moxafunc(ofsAddr, FC_SendXon, 0);
+	}
+}
+
+/*
+ * TTY operations
+ */
+
+static int moxa_ioctl(struct tty_struct *tty,
+		      unsigned int cmd, unsigned long arg)
+{
+	struct moxa_port *ch = tty->driver_data;
+	void __user *argp = (void __user *)arg;
+	int status, ret = 0;
+
+	if (tty->index == MAX_PORTS) {
+		if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE &&
+				cmd != MOXA_GETMSTATUS)
+			return -EINVAL;
+	} else if (!ch)
+		return -ENODEV;
+
+	switch (cmd) {
+	case MOXA_GETDATACOUNT:
+		moxaLog.tick = jiffies;
+		if (copy_to_user(argp, &moxaLog, sizeof(moxaLog)))
+			ret = -EFAULT;
+		break;
+	case MOXA_FLUSH_QUEUE:
+		MoxaPortFlushData(ch, arg);
+		break;
+	case MOXA_GET_IOQUEUE: {
+		struct moxaq_str __user *argm = argp;
+		struct moxaq_str tmp;
+		struct moxa_port *p;
+		unsigned int i, j;
+
+		for (i = 0; i < MAX_BOARDS; i++) {
+			p = moxa_boards[i].ports;
+			for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
+				memset(&tmp, 0, sizeof(tmp));
+				spin_lock_bh(&moxa_lock);
+				if (moxa_boards[i].ready) {
+					tmp.inq = MoxaPortRxQueue(p);
+					tmp.outq = MoxaPortTxQueue(p);
+				}
+				spin_unlock_bh(&moxa_lock);
+				if (copy_to_user(argm, &tmp, sizeof(tmp)))
+					return -EFAULT;
+			}
+		}
+		break;
+	} case MOXA_GET_OQUEUE:
+		status = MoxaPortTxQueue(ch);
+		ret = put_user(status, (unsigned long __user *)argp);
+		break;
+	case MOXA_GET_IQUEUE:
+		status = MoxaPortRxQueue(ch);
+		ret = put_user(status, (unsigned long __user *)argp);
+		break;
+	case MOXA_GETMSTATUS: {
+		struct mxser_mstatus __user *argm = argp;
+		struct mxser_mstatus tmp;
+		struct moxa_port *p;
+		unsigned int i, j;
+
+		for (i = 0; i < MAX_BOARDS; i++) {
+			p = moxa_boards[i].ports;
+			for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
+				struct tty_struct *ttyp;
+				memset(&tmp, 0, sizeof(tmp));
+				spin_lock_bh(&moxa_lock);
+				if (!moxa_boards[i].ready) {
+				        spin_unlock_bh(&moxa_lock);
+					goto copy;
+                                }
+
+				status = MoxaPortLineStatus(p);
+				spin_unlock_bh(&moxa_lock);
+
+				if (status & 1)
+					tmp.cts = 1;
+				if (status & 2)
+					tmp.dsr = 1;
+				if (status & 4)
+					tmp.dcd = 1;
+
+				ttyp = tty_port_tty_get(&p->port);
+				if (!ttyp || !ttyp->termios)
+					tmp.cflag = p->cflag;
+				else
+					tmp.cflag = ttyp->termios->c_cflag;
+				tty_kref_put(tty);
+copy:
+				if (copy_to_user(argm, &tmp, sizeof(tmp)))
+					return -EFAULT;
+			}
+		}
+		break;
+	}
+	case TIOCGSERIAL:
+	        mutex_lock(&ch->port.mutex);
+		ret = moxa_get_serial_info(ch, argp);
+		mutex_unlock(&ch->port.mutex);
+		break;
+	case TIOCSSERIAL:
+	        mutex_lock(&ch->port.mutex);
+		ret = moxa_set_serial_info(ch, argp);
+		mutex_unlock(&ch->port.mutex);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+	}
+	return ret;
+}
+
+static int moxa_break_ctl(struct tty_struct *tty, int state)
+{
+	struct moxa_port *port = tty->driver_data;
+
+	moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
+			Magic_code);
+	return 0;
+}
+
+static const struct tty_operations moxa_ops = {
+	.open = moxa_open,
+	.close = moxa_close,
+	.write = moxa_write,
+	.write_room = moxa_write_room,
+	.flush_buffer = moxa_flush_buffer,
+	.chars_in_buffer = moxa_chars_in_buffer,
+	.ioctl = moxa_ioctl,
+	.set_termios = moxa_set_termios,
+	.stop = moxa_stop,
+	.start = moxa_start,
+	.hangup = moxa_hangup,
+	.break_ctl = moxa_break_ctl,
+	.tiocmget = moxa_tiocmget,
+	.tiocmset = moxa_tiocmset,
+};
+
+static const struct tty_port_operations moxa_port_ops = {
+	.carrier_raised = moxa_carrier_raised,
+	.dtr_rts = moxa_dtr_rts,
+	.shutdown = moxa_shutdown,
+};
+
+static struct tty_driver *moxaDriver;
+static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);
+
+/*
+ * HW init
+ */
+
+static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model)
+{
+	switch (brd->boardType) {
+	case MOXA_BOARD_C218_ISA:
+	case MOXA_BOARD_C218_PCI:
+		if (model != 1)
+			goto err;
+		break;
+	case MOXA_BOARD_CP204J:
+		if (model != 3)
+			goto err;
+		break;
+	default:
+		if (model != 2)
+			goto err;
+		break;
+	}
+	return 0;
+err:
+	return -EINVAL;
+}
+
+static int moxa_check_fw(const void *ptr)
+{
+	const __le16 *lptr = ptr;
+
+	if (*lptr != cpu_to_le16(0x7980))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
+		size_t len)
+{
+	void __iomem *baseAddr = brd->basemem;
+	u16 tmp;
+
+	writeb(HW_reset, baseAddr + Control_reg);	/* reset */
+	msleep(10);
+	memset_io(baseAddr, 0, 4096);
+	memcpy_toio(baseAddr, buf, len);	/* download BIOS */
+	writeb(0, baseAddr + Control_reg);	/* restart */
+
+	msleep(2000);
+
+	switch (brd->boardType) {
+	case MOXA_BOARD_C218_ISA:
+	case MOXA_BOARD_C218_PCI:
+		tmp = readw(baseAddr + C218_key);
+		if (tmp != C218_KeyCode)
+			goto err;
+		break;
+	case MOXA_BOARD_CP204J:
+		tmp = readw(baseAddr + C218_key);
+		if (tmp != CP204J_KeyCode)
+			goto err;
+		break;
+	default:
+		tmp = readw(baseAddr + C320_key);
+		if (tmp != C320_KeyCode)
+			goto err;
+		tmp = readw(baseAddr + C320_status);
+		if (tmp != STS_init) {
+			printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
+					"module not found\n");
+			return -EIO;
+		}
+		break;
+	}
+
+	return 0;
+err:
+	printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
+	return -EIO;
+}
+
+static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
+		size_t len)
+{
+	void __iomem *baseAddr = brd->basemem;
+
+	if (len < 7168) {
+		printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
+		return -EINVAL;
+	}
+
+	writew(len - 7168 - 2, baseAddr + C320bapi_len);
+	writeb(1, baseAddr + Control_reg);	/* Select Page 1 */
+	memcpy_toio(baseAddr + DynPage_addr, ptr, 7168);
+	writeb(2, baseAddr + Control_reg);	/* Select Page 2 */
+	memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168);
+
+	return 0;
+}
+
+static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr,
+		size_t len)
+{
+	void __iomem *baseAddr = brd->basemem;
+	const __le16 *uptr = ptr;
+	size_t wlen, len2, j;
+	unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
+	unsigned int i, retry;
+	u16 usum, keycode;
+
+	keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode :
+				C218_KeyCode;
+
+	switch (brd->boardType) {
+	case MOXA_BOARD_CP204J:
+	case MOXA_BOARD_C218_ISA:
+	case MOXA_BOARD_C218_PCI:
+		key = C218_key;
+		loadbuf = C218_LoadBuf;
+		loadlen = C218DLoad_len;
+		checksum = C218check_sum;
+		checksum_ok = C218chksum_ok;
+		break;
+	default:
+		key = C320_key;
+		keycode = C320_KeyCode;
+		loadbuf = C320_LoadBuf;
+		loadlen = C320DLoad_len;
+		checksum = C320check_sum;
+		checksum_ok = C320chksum_ok;
+		break;
+	}
+
+	usum = 0;
+	wlen = len >> 1;
+	for (i = 0; i < wlen; i++)
+		usum += le16_to_cpu(uptr[i]);
+	retry = 0;
+	do {
+		wlen = len >> 1;
+		j = 0;
+		while (wlen) {
+			len2 = (wlen > 2048) ? 2048 : wlen;
+			wlen -= len2;
+			memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1);
+			j += len2 << 1;
+
+			writew(len2, baseAddr + loadlen);
+			writew(0, baseAddr + key);
+			for (i = 0; i < 100; i++) {
+				if (readw(baseAddr + key) == keycode)
+					break;
+				msleep(10);
+			}
+			if (readw(baseAddr + key) != keycode)
+				return -EIO;
+		}
+		writew(0, baseAddr + loadlen);
+		writew(usum, baseAddr + checksum);
+		writew(0, baseAddr + key);
+		for (i = 0; i < 100; i++) {
+			if (readw(baseAddr + key) == keycode)
+				break;
+			msleep(10);
+		}
+		retry++;
+	} while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3));
+	if (readb(baseAddr + checksum_ok) != 1)
+		return -EIO;
+
+	writew(0, baseAddr + key);
+	for (i = 0; i < 600; i++) {
+		if (readw(baseAddr + Magic_no) == Magic_code)
+			break;
+		msleep(10);
+	}
+	if (readw(baseAddr + Magic_no) != Magic_code)
+		return -EIO;
+
+	if (MOXA_IS_320(brd)) {
+		if (brd->busType == MOXA_BUS_TYPE_PCI) {	/* ASIC board */
+			writew(0x3800, baseAddr + TMS320_PORT1);
+			writew(0x3900, baseAddr + TMS320_PORT2);
+			writew(28499, baseAddr + TMS320_CLOCK);
+		} else {
+			writew(0x3200, baseAddr + TMS320_PORT1);
+			writew(0x3400, baseAddr + TMS320_PORT2);
+			writew(19999, baseAddr + TMS320_CLOCK);
+		}
+	}
+	writew(1, baseAddr + Disable_IRQ);
+	writew(0, baseAddr + Magic_no);
+	for (i = 0; i < 500; i++) {
+		if (readw(baseAddr + Magic_no) == Magic_code)
+			break;
+		msleep(10);
+	}
+	if (readw(baseAddr + Magic_no) != Magic_code)
+		return -EIO;
+
+	if (MOXA_IS_320(brd)) {
+		j = readw(baseAddr + Module_cnt);
+		if (j <= 0)
+			return -EIO;
+		brd->numPorts = j * 8;
+		writew(j, baseAddr + Module_no);
+		writew(0, baseAddr + Magic_no);
+		for (i = 0; i < 600; i++) {
+			if (readw(baseAddr + Magic_no) == Magic_code)
+				break;
+			msleep(10);
+		}
+		if (readw(baseAddr + Magic_no) != Magic_code)
+			return -EIO;
+	}
+	brd->intNdx = baseAddr + IRQindex;
+	brd->intPend = baseAddr + IRQpending;
+	brd->intTable = baseAddr + IRQtable;
+
+	return 0;
+}
+
+static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
+		size_t len)
+{
+	void __iomem *ofsAddr, *baseAddr = brd->basemem;
+	struct moxa_port *port;
+	int retval, i;
+
+	if (len % 2) {
+		printk(KERN_ERR "MOXA: bios length is not even\n");
+		return -EINVAL;
+	}
+
+	retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */
+	if (retval)
+		return retval;
+
+	switch (brd->boardType) {
+	case MOXA_BOARD_C218_ISA:
+	case MOXA_BOARD_C218_PCI:
+	case MOXA_BOARD_CP204J:
+		port = brd->ports;
+		for (i = 0; i < brd->numPorts; i++, port++) {
+			port->board = brd;
+			port->DCDState = 0;
+			port->tableAddr = baseAddr + Extern_table +
+					Extern_size * i;
+			ofsAddr = port->tableAddr;
+			writew(C218rx_mask, ofsAddr + RX_mask);
+			writew(C218tx_mask, ofsAddr + TX_mask);
+			writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
+			writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
+
+			writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
+			writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
+
+		}
+		break;
+	default:
+		port = brd->ports;
+		for (i = 0; i < brd->numPorts; i++, port++) {
+			port->board = brd;
+			port->DCDState = 0;
+			port->tableAddr = baseAddr + Extern_table +
+					Extern_size * i;
+			ofsAddr = port->tableAddr;
+			switch (brd->numPorts) {
+			case 8:
+				writew(C320p8rx_mask, ofsAddr + RX_mask);
+				writew(C320p8tx_mask, ofsAddr + TX_mask);
+				writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
+				writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
+				writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
+				writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
+
+				break;
+			case 16:
+				writew(C320p16rx_mask, ofsAddr + RX_mask);
+				writew(C320p16tx_mask, ofsAddr + TX_mask);
+				writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
+				writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
+				writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
+				writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
+				break;
+
+			case 24:
+				writew(C320p24rx_mask, ofsAddr + RX_mask);
+				writew(C320p24tx_mask, ofsAddr + TX_mask);
+				writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
+				writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
+				writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
+				writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
+				break;
+			case 32:
+				writew(C320p32rx_mask, ofsAddr + RX_mask);
+				writew(C320p32tx_mask, ofsAddr + TX_mask);
+				writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
+				writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
+				writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
+				writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
+				writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
+				break;
+			}
+		}
+		break;
+	}
+	return 0;
+}
+
+static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
+{
+	const void *ptr = fw->data;
+	char rsn[64];
+	u16 lens[5];
+	size_t len;
+	unsigned int a, lenp, lencnt;
+	int ret = -EINVAL;
+	struct {
+		__le32 magic;	/* 0x34303430 */
+		u8 reserved1[2];
+		u8 type;	/* UNIX = 3 */
+		u8 model;	/* C218T=1, C320T=2, CP204=3 */
+		u8 reserved2[8];
+		__le16 len[5];
+	} const *hdr = ptr;
+
+	BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens));
+
+	if (fw->size < MOXA_FW_HDRLEN) {
+		strcpy(rsn, "too short (even header won't fit)");
+		goto err;
+	}
+	if (hdr->magic != cpu_to_le32(0x30343034)) {
+		sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic));
+		goto err;
+	}
+	if (hdr->type != 3) {
+		sprintf(rsn, "not for linux, type is %u", hdr->type);
+		goto err;
+	}
+	if (moxa_check_fw_model(brd, hdr->model)) {
+		sprintf(rsn, "not for this card, model is %u", hdr->model);
+		goto err;
+	}
+
+	len = MOXA_FW_HDRLEN;
+	lencnt = hdr->model == 2 ? 5 : 3;
+	for (a = 0; a < ARRAY_SIZE(lens); a++) {
+		lens[a] = le16_to_cpu(hdr->len[a]);
+		if (lens[a] && len + lens[a] <= fw->size &&
+				moxa_check_fw(&fw->data[len]))
+			printk(KERN_WARNING "MOXA firmware: unexpected input "
+				"at offset %u, but going on\n", (u32)len);
+		if (!lens[a] && a < lencnt) {
+			sprintf(rsn, "too few entries in fw file");
+			goto err;
+		}
+		len += lens[a];
+	}
+
+	if (len != fw->size) {
+		sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size,
+				(u32)len);
+		goto err;
+	}
+
+	ptr += MOXA_FW_HDRLEN;
+	lenp = 0; /* bios */
+
+	strcpy(rsn, "read above");
+
+	ret = moxa_load_bios(brd, ptr, lens[lenp]);
+	if (ret)
+		goto err;
+
+	/* we skip the tty section (lens[1]), since we don't need it */
+	ptr += lens[lenp] + lens[lenp + 1];
+	lenp += 2; /* comm */
+
+	if (hdr->model == 2) {
+		ret = moxa_load_320b(brd, ptr, lens[lenp]);
+		if (ret)
+			goto err;
+		/* skip another tty */
+		ptr += lens[lenp] + lens[lenp + 1];
+		lenp += 2;
+	}
+
+	ret = moxa_load_code(brd, ptr, lens[lenp]);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
+	return ret;
+}
+
+static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
+{
+	const struct firmware *fw;
+	const char *file;
+	struct moxa_port *p;
+	unsigned int i;
+	int ret;
+
+	brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
+			GFP_KERNEL);
+	if (brd->ports == NULL) {
+		printk(KERN_ERR "cannot allocate memory for ports\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
+		tty_port_init(&p->port);
+		p->port.ops = &moxa_port_ops;
+		p->type = PORT_16550A;
+		p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
+	}
+
+	switch (brd->boardType) {
+	case MOXA_BOARD_C218_ISA:
+	case MOXA_BOARD_C218_PCI:
+		file = "c218tunx.cod";
+		break;
+	case MOXA_BOARD_CP204J:
+		file = "cp204unx.cod";
+		break;
+	default:
+		file = "c320tunx.cod";
+		break;
+	}
+
+	ret = request_firmware(&fw, file, dev);
+	if (ret) {
+		printk(KERN_ERR "MOXA: request_firmware failed. Make sure "
+				"you've placed '%s' file into your firmware "
+				"loader directory (e.g. /lib/firmware)\n",
+				file);
+		goto err_free;
+	}
+
+	ret = moxa_load_fw(brd, fw);
+
+	release_firmware(fw);
+
+	if (ret)
+		goto err_free;
+
+	spin_lock_bh(&moxa_lock);
+	brd->ready = 1;
+	if (!timer_pending(&moxaTimer))
+		mod_timer(&moxaTimer, jiffies + HZ / 50);
+	spin_unlock_bh(&moxa_lock);
+
+	return 0;
+err_free:
+	kfree(brd->ports);
+err:
+	return ret;
+}
+
+static void moxa_board_deinit(struct moxa_board_conf *brd)
+{
+	unsigned int a, opened;
+
+	mutex_lock(&moxa_openlock);
+	spin_lock_bh(&moxa_lock);
+	brd->ready = 0;
+	spin_unlock_bh(&moxa_lock);
+
+	/* pci hot-un-plug support */
+	for (a = 0; a < brd->numPorts; a++)
+		if (brd->ports[a].port.flags & ASYNC_INITIALIZED) {
+			struct tty_struct *tty = tty_port_tty_get(
+						&brd->ports[a].port);
+			if (tty) {
+				tty_hangup(tty);
+				tty_kref_put(tty);
+			}
+		}
+	while (1) {
+		opened = 0;
+		for (a = 0; a < brd->numPorts; a++)
+			if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
+				opened++;
+		mutex_unlock(&moxa_openlock);
+		if (!opened)
+			break;
+		msleep(50);
+		mutex_lock(&moxa_openlock);
+	}
+
+	iounmap(brd->basemem);
+	brd->basemem = NULL;
+	kfree(brd->ports);
+}
+
+#ifdef CONFIG_PCI
+static int __devinit moxa_pci_probe(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+	struct moxa_board_conf *board;
+	unsigned int i;
+	int board_type = ent->driver_data;
+	int retval;
+
+	retval = pci_enable_device(pdev);
+	if (retval) {
+		dev_err(&pdev->dev, "can't enable pci device\n");
+		goto err;
+	}
+
+	for (i = 0; i < MAX_BOARDS; i++)
+		if (moxa_boards[i].basemem == NULL)
+			break;
+
+	retval = -ENODEV;
+	if (i >= MAX_BOARDS) {
+		dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards "
+				"found. Board is ignored.\n", MAX_BOARDS);
+		goto err;
+	}
+
+	board = &moxa_boards[i];
+
+	retval = pci_request_region(pdev, 2, "moxa-base");
+	if (retval) {
+		dev_err(&pdev->dev, "can't request pci region 2\n");
+		goto err;
+	}
+
+	board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000);
+	if (board->basemem == NULL) {
+		dev_err(&pdev->dev, "can't remap io space 2\n");
+		goto err_reg;
+	}
+
+	board->boardType = board_type;
+	switch (board_type) {
+	case MOXA_BOARD_C218_ISA:
+	case MOXA_BOARD_C218_PCI:
+		board->numPorts = 8;
+		break;
+
+	case MOXA_BOARD_CP204J:
+		board->numPorts = 4;
+		break;
+	default:
+		board->numPorts = 0;
+		break;
+	}
+	board->busType = MOXA_BUS_TYPE_PCI;
+
+	retval = moxa_init_board(board, &pdev->dev);
+	if (retval)
+		goto err_base;
+
+	pci_set_drvdata(pdev, board);
+
+	dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n",
+			moxa_brdname[board_type - 1], board->numPorts);
+
+	return 0;
+err_base:
+	iounmap(board->basemem);
+	board->basemem = NULL;
+err_reg:
+	pci_release_region(pdev, 2);
+err:
+	return retval;
+}
+
+static void __devexit moxa_pci_remove(struct pci_dev *pdev)
+{
+	struct moxa_board_conf *brd = pci_get_drvdata(pdev);
+
+	moxa_board_deinit(brd);
+
+	pci_release_region(pdev, 2);
+}
+
+static struct pci_driver moxa_pci_driver = {
+	.name = "moxa",
+	.id_table = moxa_pcibrds,
+	.probe = moxa_pci_probe,
+	.remove = __devexit_p(moxa_pci_remove)
+};
+#endif /* CONFIG_PCI */
+
+static int __init moxa_init(void)
+{
+	unsigned int isabrds = 0;
+	int retval = 0;
+	struct moxa_board_conf *brd = moxa_boards;
+	unsigned int i;
+
+	printk(KERN_INFO "MOXA Intellio family driver version %s\n",
+			MOXA_VERSION);
+	moxaDriver = alloc_tty_driver(MAX_PORTS + 1);
+	if (!moxaDriver)
+		return -ENOMEM;
+
+	moxaDriver->owner = THIS_MODULE;
+	moxaDriver->name = "ttyMX";
+	moxaDriver->major = ttymajor;
+	moxaDriver->minor_start = 0;
+	moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
+	moxaDriver->subtype = SERIAL_TYPE_NORMAL;
+	moxaDriver->init_termios = tty_std_termios;
+	moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
+	moxaDriver->init_termios.c_ispeed = 9600;
+	moxaDriver->init_termios.c_ospeed = 9600;
+	moxaDriver->flags = TTY_DRIVER_REAL_RAW;
+	tty_set_operations(moxaDriver, &moxa_ops);
+
+	if (tty_register_driver(moxaDriver)) {
+		printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
+		put_tty_driver(moxaDriver);
+		return -1;
+	}
+
+	/* Find the boards defined from module args. */
+
+	for (i = 0; i < MAX_BOARDS; i++) {
+		if (!baseaddr[i])
+			break;
+		if (type[i] == MOXA_BOARD_C218_ISA ||
+				type[i] == MOXA_BOARD_C320_ISA) {
+			pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
+					isabrds + 1, moxa_brdname[type[i] - 1],
+					baseaddr[i]);
+			brd->boardType = type[i];
+			brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
+					numports[i];
+			brd->busType = MOXA_BUS_TYPE_ISA;
+			brd->basemem = ioremap_nocache(baseaddr[i], 0x4000);
+			if (!brd->basemem) {
+				printk(KERN_ERR "MOXA: can't remap %lx\n",
+						baseaddr[i]);
+				continue;
+			}
+			if (moxa_init_board(brd, NULL)) {
+				iounmap(brd->basemem);
+				brd->basemem = NULL;
+				continue;
+			}
+
+			printk(KERN_INFO "MOXA isa board found at 0x%.8lu and "
+					"ready (%u ports, firmware loaded)\n",
+					baseaddr[i], brd->numPorts);
+
+			brd++;
+			isabrds++;
+		}
+	}
+
+#ifdef CONFIG_PCI
+	retval = pci_register_driver(&moxa_pci_driver);
+	if (retval) {
+		printk(KERN_ERR "Can't register MOXA pci driver!\n");
+		if (isabrds)
+			retval = 0;
+	}
+#endif
+
+	return retval;
+}
+
+static void __exit moxa_exit(void)
+{
+	unsigned int i;
+
+#ifdef CONFIG_PCI
+	pci_unregister_driver(&moxa_pci_driver);
+#endif
+
+	for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */
+		if (moxa_boards[i].ready)
+			moxa_board_deinit(&moxa_boards[i]);
+
+	del_timer_sync(&moxaTimer);
+
+	if (tty_unregister_driver(moxaDriver))
+		printk(KERN_ERR "Couldn't unregister MOXA Intellio family "
+				"serial driver\n");
+	put_tty_driver(moxaDriver);
+}
+
+module_init(moxa_init);
+module_exit(moxa_exit);
+
+static void moxa_shutdown(struct tty_port *port)
+{
+	struct moxa_port *ch = container_of(port, struct moxa_port, port);
+        MoxaPortDisable(ch);
+	MoxaPortFlushData(ch, 2);
+	clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+}
+
+static int moxa_carrier_raised(struct tty_port *port)
+{
+	struct moxa_port *ch = container_of(port, struct moxa_port, port);
+	int dcd;
+
+	spin_lock_irq(&port->lock);
+	dcd = ch->DCDState;
+	spin_unlock_irq(&port->lock);
+	return dcd;
+}
+
+static void moxa_dtr_rts(struct tty_port *port, int onoff)
+{
+	struct moxa_port *ch = container_of(port, struct moxa_port, port);
+	MoxaPortLineCtrl(ch, onoff, onoff);
+}
+
+
+static int moxa_open(struct tty_struct *tty, struct file *filp)
+{
+	struct moxa_board_conf *brd;
+	struct moxa_port *ch;
+	int port;
+	int retval;
+
+	port = tty->index;
+	if (port == MAX_PORTS) {
+		return capable(CAP_SYS_ADMIN) ? 0 : -EPERM;
+	}
+	if (mutex_lock_interruptible(&moxa_openlock))
+		return -ERESTARTSYS;
+	brd = &moxa_boards[port / MAX_PORTS_PER_BOARD];
+	if (!brd->ready) {
+		mutex_unlock(&moxa_openlock);
+		return -ENODEV;
+	}
+
+	if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
+		mutex_unlock(&moxa_openlock);
+		return -ENODEV;
+	}
+
+	ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
+	ch->port.count++;
+	tty->driver_data = ch;
+	tty_port_tty_set(&ch->port, tty);
+	mutex_lock(&ch->port.mutex);
+	if (!(ch->port.flags & ASYNC_INITIALIZED)) {
+		ch->statusflags = 0;
+		moxa_set_tty_param(tty, tty->termios);
+		MoxaPortLineCtrl(ch, 1, 1);
+		MoxaPortEnable(ch);
+		MoxaSetFifo(ch, ch->type == PORT_16550A);
+		ch->port.flags |= ASYNC_INITIALIZED;
+	}
+	mutex_unlock(&ch->port.mutex);
+	mutex_unlock(&moxa_openlock);
+
+	retval = tty_port_block_til_ready(&ch->port, tty, filp);
+	if (retval == 0)
+	        set_bit(ASYNCB_NORMAL_ACTIVE, &ch->port.flags);
+	return retval;
+}
+
+static void moxa_close(struct tty_struct *tty, struct file *filp)
+{
+	struct moxa_port *ch = tty->driver_data;
+	ch->cflag = tty->termios->c_cflag;
+	tty_port_close(&ch->port, tty, filp);
+}
+
+static int moxa_write(struct tty_struct *tty,
+		      const unsigned char *buf, int count)
+{
+	struct moxa_port *ch = tty->driver_data;
+	int len;
+
+	if (ch == NULL)
+		return 0;
+
+	spin_lock_bh(&moxa_lock);
+	len = MoxaPortWriteData(tty, buf, count);
+	spin_unlock_bh(&moxa_lock);
+
+	set_bit(LOWWAIT, &ch->statusflags);
+	return len;
+}
+
+static int moxa_write_room(struct tty_struct *tty)
+{
+	struct moxa_port *ch;
+
+	if (tty->stopped)
+		return 0;
+	ch = tty->driver_data;
+	if (ch == NULL)
+		return 0;
+	return MoxaPortTxFree(ch);
+}
+
+static void moxa_flush_buffer(struct tty_struct *tty)
+{
+	struct moxa_port *ch = tty->driver_data;
+
+	if (ch == NULL)
+		return;
+	MoxaPortFlushData(ch, 1);
+	tty_wakeup(tty);
+}
+
+static int moxa_chars_in_buffer(struct tty_struct *tty)
+{
+	struct moxa_port *ch = tty->driver_data;
+	int chars;
+
+	chars = MoxaPortTxQueue(ch);
+	if (chars)
+		/*
+		 * Make it possible to wakeup anything waiting for output
+		 * in tty_ioctl.c, etc.
+		 */
+        	set_bit(EMPTYWAIT, &ch->statusflags);
+	return chars;
+}
+
+static int moxa_tiocmget(struct tty_struct *tty)
+{
+	struct moxa_port *ch = tty->driver_data;
+	int flag = 0, dtr, rts;
+
+	MoxaPortGetLineOut(ch, &dtr, &rts);
+	if (dtr)
+		flag |= TIOCM_DTR;
+	if (rts)
+		flag |= TIOCM_RTS;
+	dtr = MoxaPortLineStatus(ch);
+	if (dtr & 1)
+		flag |= TIOCM_CTS;
+	if (dtr & 2)
+		flag |= TIOCM_DSR;
+	if (dtr & 4)
+		flag |= TIOCM_CD;
+	return flag;
+}
+
+static int moxa_tiocmset(struct tty_struct *tty,
+			 unsigned int set, unsigned int clear)
+{
+	struct moxa_port *ch;
+	int port;
+	int dtr, rts;
+
+	port = tty->index;
+	mutex_lock(&moxa_openlock);
+	ch = tty->driver_data;
+	if (!ch) {
+		mutex_unlock(&moxa_openlock);
+		return -EINVAL;
+	}
+
+	MoxaPortGetLineOut(ch, &dtr, &rts);
+	if (set & TIOCM_RTS)
+		rts = 1;
+	if (set & TIOCM_DTR)
+		dtr = 1;
+	if (clear & TIOCM_RTS)
+		rts = 0;
+	if (clear & TIOCM_DTR)
+		dtr = 0;
+	MoxaPortLineCtrl(ch, dtr, rts);
+	mutex_unlock(&moxa_openlock);
+	return 0;
+}
+
+static void moxa_set_termios(struct tty_struct *tty,
+		struct ktermios *old_termios)
+{
+	struct moxa_port *ch = tty->driver_data;
+
+	if (ch == NULL)
+		return;
+	moxa_set_tty_param(tty, old_termios);
+	if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
+		wake_up_interruptible(&ch->port.open_wait);
+}
+
+static void moxa_stop(struct tty_struct *tty)
+{
+	struct moxa_port *ch = tty->driver_data;
+
+	if (ch == NULL)
+		return;
+	MoxaPortTxDisable(ch);
+	set_bit(TXSTOPPED, &ch->statusflags);
+}
+
+
+static void moxa_start(struct tty_struct *tty)
+{
+	struct moxa_port *ch = tty->driver_data;
+
+	if (ch == NULL)
+		return;
+
+	if (!(ch->statusflags & TXSTOPPED))
+		return;
+
+	MoxaPortTxEnable(ch);
+	clear_bit(TXSTOPPED, &ch->statusflags);
+}
+
+static void moxa_hangup(struct tty_struct *tty)
+{
+	struct moxa_port *ch = tty->driver_data;
+	tty_port_hangup(&ch->port);
+}
+
+static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
+{
+	struct tty_struct *tty;
+	unsigned long flags;
+	dcd = !!dcd;
+
+	spin_lock_irqsave(&p->port.lock, flags);
+	if (dcd != p->DCDState) {
+        	p->DCDState = dcd;
+        	spin_unlock_irqrestore(&p->port.lock, flags);
+		tty = tty_port_tty_get(&p->port);
+		if (tty && C_CLOCAL(tty) && !dcd)
+			tty_hangup(tty);
+		tty_kref_put(tty);
+	}
+	else
+		spin_unlock_irqrestore(&p->port.lock, flags);
+}
+
+static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
+		u16 __iomem *ip)
+{
+	struct tty_struct *tty = tty_port_tty_get(&p->port);
+	void __iomem *ofsAddr;
+	unsigned int inited = p->port.flags & ASYNC_INITIALIZED;
+	u16 intr;
+
+	if (tty) {
+		if (test_bit(EMPTYWAIT, &p->statusflags) &&
+				MoxaPortTxQueue(p) == 0) {
+			clear_bit(EMPTYWAIT, &p->statusflags);
+			tty_wakeup(tty);
+		}
+		if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped &&
+				MoxaPortTxQueue(p) <= WAKEUP_CHARS) {
+			clear_bit(LOWWAIT, &p->statusflags);
+			tty_wakeup(tty);
+		}
+
+		if (inited && !test_bit(TTY_THROTTLED, &tty->flags) &&
+				MoxaPortRxQueue(p) > 0) { /* RX */
+			MoxaPortReadData(p);
+			tty_schedule_flip(tty);
+		}
+	} else {
+		clear_bit(EMPTYWAIT, &p->statusflags);
+		MoxaPortFlushData(p, 0); /* flush RX */
+	}
+
+	if (!handle) /* nothing else to do */
+		goto put;
+
+	intr = readw(ip); /* port irq status */
+	if (intr == 0)
+		goto put;
+
+	writew(0, ip); /* ACK port */
+	ofsAddr = p->tableAddr;
+	if (intr & IntrTx) /* disable tx intr */
+		writew(readw(ofsAddr + HostStat) & ~WakeupTx,
+				ofsAddr + HostStat);
+
+	if (!inited)
+		goto put;
+
+	if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */
+		tty_insert_flip_char(tty, 0, TTY_BREAK);
+		tty_schedule_flip(tty);
+	}
+
+	if (intr & IntrLine)
+		moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
+put:
+	tty_kref_put(tty);
+
+	return 0;
+}
+
+static void moxa_poll(unsigned long ignored)
+{
+	struct moxa_board_conf *brd;
+	u16 __iomem *ip;
+	unsigned int card, port, served = 0;
+
+	spin_lock(&moxa_lock);
+	for (card = 0; card < MAX_BOARDS; card++) {
+		brd = &moxa_boards[card];
+		if (!brd->ready)
+			continue;
+
+		served++;
+
+		ip = NULL;
+		if (readb(brd->intPend) == 0xff)
+			ip = brd->intTable + readb(brd->intNdx);
+
+		for (port = 0; port < brd->numPorts; port++)
+			moxa_poll_port(&brd->ports[port], !!ip, ip + port);
+
+		if (ip)
+			writeb(0, brd->intPend); /* ACK */
+
+		if (moxaLowWaterChk) {
+			struct moxa_port *p = brd->ports;
+			for (port = 0; port < brd->numPorts; port++, p++)
+				if (p->lowChkFlag) {
+					p->lowChkFlag = 0;
+					moxa_low_water_check(p->tableAddr);
+				}
+		}
+	}
+	moxaLowWaterChk = 0;
+
+	if (served)
+		mod_timer(&moxaTimer, jiffies + HZ / 50);
+	spin_unlock(&moxa_lock);
+}
+
+/******************************************************************************/
+
+static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
+{
+	register struct ktermios *ts = tty->termios;
+	struct moxa_port *ch = tty->driver_data;
+	int rts, cts, txflow, rxflow, xany, baud;
+
+	rts = cts = txflow = rxflow = xany = 0;
+	if (ts->c_cflag & CRTSCTS)
+		rts = cts = 1;
+	if (ts->c_iflag & IXON)
+		txflow = 1;
+	if (ts->c_iflag & IXOFF)
+		rxflow = 1;
+	if (ts->c_iflag & IXANY)
+		xany = 1;
+
+	/* Clear the features we don't support */
+	ts->c_cflag &= ~CMSPAR;
+	MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
+	baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
+	if (baud == -1)
+		baud = tty_termios_baud_rate(old_termios);
+	/* Not put the baud rate into the termios data */
+	tty_encode_baud_rate(tty, baud, baud);
+}
+
+/*****************************************************************************
+ *	Driver level functions: 					     *
+ *****************************************************************************/
+
+static void MoxaPortFlushData(struct moxa_port *port, int mode)
+{
+	void __iomem *ofsAddr;
+	if (mode < 0 || mode > 2)
+		return;
+	ofsAddr = port->tableAddr;
+	moxafunc(ofsAddr, FC_FlushQueue, mode);
+	if (mode != 1) {
+		port->lowChkFlag = 0;
+		moxa_low_water_check(ofsAddr);
+	}
+}
+
+/*
+ *    Moxa Port Number Description:
+ *
+ *      MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
+ *      the port number using in MOXA driver functions will be 0 to 31 for
+ *      first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
+ *      to 127 for fourth. For example, if you setup three MOXA boards,
+ *      first board is C218, second board is C320-16 and third board is
+ *      C320-32. The port number of first board (C218 - 8 ports) is from
+ *      0 to 7. The port number of second board (C320 - 16 ports) is form
+ *      32 to 47. The port number of third board (C320 - 32 ports) is from
+ *      64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
+ *      127 will be invalid.
+ *
+ *
+ *      Moxa Functions Description:
+ *
+ *      Function 1:     Driver initialization routine, this routine must be
+ *                      called when initialized driver.
+ *      Syntax:
+ *      void MoxaDriverInit();
+ *
+ *
+ *      Function 2:     Moxa driver private IOCTL command processing.
+ *      Syntax:
+ *      int  MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
+ *
+ *           unsigned int cmd   : IOCTL command
+ *           unsigned long arg  : IOCTL argument
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    0  (OK)
+ *                      -EINVAL
+ *                      -ENOIOCTLCMD
+ *
+ *
+ *      Function 6:     Enable this port to start Tx/Rx data.
+ *      Syntax:
+ *      void MoxaPortEnable(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *
+ *      Function 7:     Disable this port
+ *      Syntax:
+ *      void MoxaPortDisable(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *
+ *      Function 10:    Setting baud rate of this port.
+ *      Syntax:
+ *      speed_t MoxaPortSetBaud(int port, speed_t baud);
+ *           int port           : port number (0 - 127)
+ *           long baud          : baud rate (50 - 115200)
+ *
+ *           return:    0       : this port is invalid or baud < 50
+ *                      50 - 115200 : the real baud rate set to the port, if
+ *                                    the argument baud is large than maximun
+ *                                    available baud rate, the real setting
+ *                                    baud rate will be the maximun baud rate.
+ *
+ *
+ *      Function 12:    Configure the port.
+ *      Syntax:
+ *      int  MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
+ *           int port           : port number (0 - 127)
+ *           struct ktermios * termio : termio structure pointer
+ *	     speed_t baud	: baud rate
+ *
+ *           return:    -1      : this port is invalid or termio == NULL
+ *                      0       : setting O.K.
+ *
+ *
+ *      Function 13:    Get the DTR/RTS state of this port.
+ *      Syntax:
+ *      int  MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
+ *           int port           : port number (0 - 127)
+ *           int * dtrState     : pointer to INT to receive the current DTR
+ *                                state. (if NULL, this function will not
+ *                                write to this address)
+ *           int * rtsState     : pointer to INT to receive the current RTS
+ *                                state. (if NULL, this function will not
+ *                                write to this address)
+ *
+ *           return:    -1      : this port is invalid
+ *                      0       : O.K.
+ *
+ *
+ *      Function 14:    Setting the DTR/RTS output state of this port.
+ *      Syntax:
+ *      void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
+ *           int port           : port number (0 - 127)
+ *           int dtrState       : DTR output state (0: off, 1: on)
+ *           int rtsState       : RTS output state (0: off, 1: on)
+ *
+ *
+ *      Function 15:    Setting the flow control of this port.
+ *      Syntax:
+ *      void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
+ *                            int txFlow,int xany);
+ *           int port           : port number (0 - 127)
+ *           int rtsFlow        : H/W RTS flow control (0: no, 1: yes)
+ *           int ctsFlow        : H/W CTS flow control (0: no, 1: yes)
+ *           int rxFlow         : S/W Rx XON/XOFF flow control (0: no, 1: yes)
+ *           int txFlow         : S/W Tx XON/XOFF flow control (0: no, 1: yes)
+ *           int xany           : S/W XANY flow control (0: no, 1: yes)
+ *
+ *
+ *      Function 16:    Get ths line status of this port
+ *      Syntax:
+ *      int  MoxaPortLineStatus(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    Bit 0 - CTS state (0: off, 1: on)
+ *                      Bit 1 - DSR state (0: off, 1: on)
+ *                      Bit 2 - DCD state (0: off, 1: on)
+ *
+ *
+ *      Function 19:    Flush the Rx/Tx buffer data of this port.
+ *      Syntax:
+ *      void MoxaPortFlushData(int port, int mode);
+ *           int port           : port number (0 - 127)
+ *           int mode    
+ *                      0       : flush the Rx buffer 
+ *                      1       : flush the Tx buffer 
+ *                      2       : flush the Rx and Tx buffer 
+ *
+ *
+ *      Function 20:    Write data.
+ *      Syntax:
+ *      int  MoxaPortWriteData(int port, unsigned char * buffer, int length);
+ *           int port           : port number (0 - 127)
+ *           unsigned char * buffer     : pointer to write data buffer.
+ *           int length         : write data length
+ *
+ *           return:    0 - length      : real write data length
+ *
+ *
+ *      Function 21:    Read data.
+ *      Syntax:
+ *      int  MoxaPortReadData(int port, struct tty_struct *tty);
+ *           int port           : port number (0 - 127)
+ *	     struct tty_struct *tty : tty for data
+ *
+ *           return:    0 - length      : real read data length
+ *
+ *
+ *      Function 24:    Get the Tx buffer current queued data bytes
+ *      Syntax:
+ *      int  MoxaPortTxQueue(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    ..      : Tx buffer current queued data bytes
+ *
+ *
+ *      Function 25:    Get the Tx buffer current free space
+ *      Syntax:
+ *      int  MoxaPortTxFree(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    ..      : Tx buffer current free space
+ *
+ *
+ *      Function 26:    Get the Rx buffer current queued data bytes
+ *      Syntax:
+ *      int  MoxaPortRxQueue(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    ..      : Rx buffer current queued data bytes
+ *
+ *
+ *      Function 28:    Disable port data transmission.
+ *      Syntax:
+ *      void MoxaPortTxDisable(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *
+ *      Function 29:    Enable port data transmission.
+ *      Syntax:
+ *      void MoxaPortTxEnable(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *
+ *      Function 31:    Get the received BREAK signal count and reset it.
+ *      Syntax:
+ *      int  MoxaPortResetBrkCnt(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    0 - ..  : BREAK signal count
+ *
+ *
+ */
+
+static void MoxaPortEnable(struct moxa_port *port)
+{
+	void __iomem *ofsAddr;
+	u16 lowwater = 512;
+
+	ofsAddr = port->tableAddr;
+	writew(lowwater, ofsAddr + Low_water);
+	if (MOXA_IS_320(port->board))
+		moxafunc(ofsAddr, FC_SetBreakIrq, 0);
+	else
+		writew(readw(ofsAddr + HostStat) | WakeupBreak,
+				ofsAddr + HostStat);
+
+	moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
+	moxafunc(ofsAddr, FC_FlushQueue, 2);
+
+	moxafunc(ofsAddr, FC_EnableCH, Magic_code);
+	MoxaPortLineStatus(port);
+}
+
+static void MoxaPortDisable(struct moxa_port *port)
+{
+	void __iomem *ofsAddr = port->tableAddr;
+
+	moxafunc(ofsAddr, FC_SetFlowCtl, 0);	/* disable flow control */
+	moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
+	writew(0, ofsAddr + HostStat);
+	moxafunc(ofsAddr, FC_DisableCH, Magic_code);
+}
+
+static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud)
+{
+	void __iomem *ofsAddr = port->tableAddr;
+	unsigned int clock, val;
+	speed_t max;
+
+	max = MOXA_IS_320(port->board) ? 460800 : 921600;
+	if (baud < 50)
+		return 0;
+	if (baud > max)
+		baud = max;
+	clock = 921600;
+	val = clock / baud;
+	moxafunc(ofsAddr, FC_SetBaud, val);
+	baud = clock / val;
+	return baud;
+}
+
+static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
+		speed_t baud)
+{
+	void __iomem *ofsAddr;
+	tcflag_t cflag;
+	tcflag_t mode = 0;
+
+	ofsAddr = port->tableAddr;
+	cflag = termio->c_cflag;	/* termio->c_cflag */
+
+	mode = termio->c_cflag & CSIZE;
+	if (mode == CS5)
+		mode = MX_CS5;
+	else if (mode == CS6)
+		mode = MX_CS6;
+	else if (mode == CS7)
+		mode = MX_CS7;
+	else if (mode == CS8)
+		mode = MX_CS8;
+
+	if (termio->c_cflag & CSTOPB) {
+		if (mode == MX_CS5)
+			mode |= MX_STOP15;
+		else
+			mode |= MX_STOP2;
+	} else
+		mode |= MX_STOP1;
+
+	if (termio->c_cflag & PARENB) {
+		if (termio->c_cflag & PARODD)
+			mode |= MX_PARODD;
+		else
+			mode |= MX_PAREVEN;
+	} else
+		mode |= MX_PARNONE;
+
+	moxafunc(ofsAddr, FC_SetDataMode, (u16)mode);
+
+	if (MOXA_IS_320(port->board) && baud >= 921600)
+		return -1;
+
+	baud = MoxaPortSetBaud(port, baud);
+
+	if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
+	        spin_lock_irq(&moxafunc_lock);
+		writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
+		writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
+		writeb(FC_SetXonXoff, ofsAddr + FuncCode);
+		moxa_wait_finish(ofsAddr);
+		spin_unlock_irq(&moxafunc_lock);
+
+	}
+	return baud;
+}
+
+static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState,
+		int *rtsState)
+{
+	if (dtrState)
+		*dtrState = !!(port->lineCtrl & DTR_ON);
+	if (rtsState)
+		*rtsState = !!(port->lineCtrl & RTS_ON);
+
+	return 0;
+}
+
+static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts)
+{
+	u8 mode = 0;
+
+	if (dtr)
+		mode |= DTR_ON;
+	if (rts)
+		mode |= RTS_ON;
+	port->lineCtrl = mode;
+	moxafunc(port->tableAddr, FC_LineControl, mode);
+}
+
+static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts,
+		int txflow, int rxflow, int txany)
+{
+	int mode = 0;
+
+	if (rts)
+		mode |= RTS_FlowCtl;
+	if (cts)
+		mode |= CTS_FlowCtl;
+	if (txflow)
+		mode |= Tx_FlowCtl;
+	if (rxflow)
+		mode |= Rx_FlowCtl;
+	if (txany)
+		mode |= IXM_IXANY;
+	moxafunc(port->tableAddr, FC_SetFlowCtl, mode);
+}
+
+static int MoxaPortLineStatus(struct moxa_port *port)
+{
+	void __iomem *ofsAddr;
+	int val;
+
+	ofsAddr = port->tableAddr;
+	if (MOXA_IS_320(port->board))
+		val = moxafuncret(ofsAddr, FC_LineStatus, 0);
+	else
+		val = readw(ofsAddr + FlagStat) >> 4;
+	val &= 0x0B;
+	if (val & 8)
+		val |= 4;
+	moxa_new_dcdstate(port, val & 8);
+	val &= 7;
+	return val;
+}
+
+static int MoxaPortWriteData(struct tty_struct *tty,
+		const unsigned char *buffer, int len)
+{
+	struct moxa_port *port = tty->driver_data;
+	void __iomem *baseAddr, *ofsAddr, *ofs;
+	unsigned int c, total;
+	u16 head, tail, tx_mask, spage, epage;
+	u16 pageno, pageofs, bufhead;
+
+	ofsAddr = port->tableAddr;
+	baseAddr = port->board->basemem;
+	tx_mask = readw(ofsAddr + TX_mask);
+	spage = readw(ofsAddr + Page_txb);
+	epage = readw(ofsAddr + EndPage_txb);
+	tail = readw(ofsAddr + TXwptr);
+	head = readw(ofsAddr + TXrptr);
+	c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
+	if (c > len)
+		c = len;
+	moxaLog.txcnt[port->port.tty->index] += c;
+	total = c;
+	if (spage == epage) {
+		bufhead = readw(ofsAddr + Ofs_txb);
+		writew(spage, baseAddr + Control_reg);
+		while (c > 0) {
+			if (head > tail)
+				len = head - tail - 1;
+			else
+				len = tx_mask + 1 - tail;
+			len = (c > len) ? len : c;
+			ofs = baseAddr + DynPage_addr + bufhead + tail;
+			memcpy_toio(ofs, buffer, len);
+			buffer += len;
+			tail = (tail + len) & tx_mask;
+			c -= len;
+		}
+	} else {
+		pageno = spage + (tail >> 13);
+		pageofs = tail & Page_mask;
+		while (c > 0) {
+			len = Page_size - pageofs;
+			if (len > c)
+				len = c;
+			writeb(pageno, baseAddr + Control_reg);
+			ofs = baseAddr + DynPage_addr + pageofs;
+			memcpy_toio(ofs, buffer, len);
+			buffer += len;
+			if (++pageno == epage)
+				pageno = spage;
+			pageofs = 0;
+			c -= len;
+		}
+		tail = (tail + total) & tx_mask;
+	}
+	writew(tail, ofsAddr + TXwptr);
+	writeb(1, ofsAddr + CD180TXirq);	/* start to send */
+	return total;
+}
+
+static int MoxaPortReadData(struct moxa_port *port)
+{
+	struct tty_struct *tty = port->port.tty;
+	unsigned char *dst;
+	void __iomem *baseAddr, *ofsAddr, *ofs;
+	unsigned int count, len, total;
+	u16 tail, rx_mask, spage, epage;
+	u16 pageno, pageofs, bufhead, head;
+
+	ofsAddr = port->tableAddr;
+	baseAddr = port->board->basemem;
+	head = readw(ofsAddr + RXrptr);
+	tail = readw(ofsAddr + RXwptr);
+	rx_mask = readw(ofsAddr + RX_mask);
+	spage = readw(ofsAddr + Page_rxb);
+	epage = readw(ofsAddr + EndPage_rxb);
+	count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1);
+	if (count == 0)
+		return 0;
+
+	total = count;
+	moxaLog.rxcnt[tty->index] += total;
+	if (spage == epage) {
+		bufhead = readw(ofsAddr + Ofs_rxb);
+		writew(spage, baseAddr + Control_reg);
+		while (count > 0) {
+			ofs = baseAddr + DynPage_addr + bufhead + head;
+			len = (tail >= head) ? (tail - head) :
+					(rx_mask + 1 - head);
+			len = tty_prepare_flip_string(tty, &dst,
+					min(len, count));
+			memcpy_fromio(dst, ofs, len);
+			head = (head + len) & rx_mask;
+			count -= len;
+		}
+	} else {
+		pageno = spage + (head >> 13);
+		pageofs = head & Page_mask;
+		while (count > 0) {
+			writew(pageno, baseAddr + Control_reg);
+			ofs = baseAddr + DynPage_addr + pageofs;
+			len = tty_prepare_flip_string(tty, &dst,
+					min(Page_size - pageofs, count));
+			memcpy_fromio(dst, ofs, len);
+
+			count -= len;
+			pageofs = (pageofs + len) & Page_mask;
+			if (pageofs == 0 && ++pageno == epage)
+				pageno = spage;
+		}
+		head = (head + total) & rx_mask;
+	}
+	writew(head, ofsAddr + RXrptr);
+	if (readb(ofsAddr + FlagStat) & Xoff_state) {
+		moxaLowWaterChk = 1;
+		port->lowChkFlag = 1;
+	}
+	return total;
+}
+
+
+static int MoxaPortTxQueue(struct moxa_port *port)
+{
+	void __iomem *ofsAddr = port->tableAddr;
+	u16 rptr, wptr, mask;
+
+	rptr = readw(ofsAddr + TXrptr);
+	wptr = readw(ofsAddr + TXwptr);
+	mask = readw(ofsAddr + TX_mask);
+	return (wptr - rptr) & mask;
+}
+
+static int MoxaPortTxFree(struct moxa_port *port)
+{
+	void __iomem *ofsAddr = port->tableAddr;
+	u16 rptr, wptr, mask;
+
+	rptr = readw(ofsAddr + TXrptr);
+	wptr = readw(ofsAddr + TXwptr);
+	mask = readw(ofsAddr + TX_mask);
+	return mask - ((wptr - rptr) & mask);
+}
+
+static int MoxaPortRxQueue(struct moxa_port *port)
+{
+	void __iomem *ofsAddr = port->tableAddr;
+	u16 rptr, wptr, mask;
+
+	rptr = readw(ofsAddr + RXrptr);
+	wptr = readw(ofsAddr + RXwptr);
+	mask = readw(ofsAddr + RX_mask);
+	return (wptr - rptr) & mask;
+}
+
+static void MoxaPortTxDisable(struct moxa_port *port)
+{
+	moxafunc(port->tableAddr, FC_SetXoffState, Magic_code);
+}
+
+static void MoxaPortTxEnable(struct moxa_port *port)
+{
+	moxafunc(port->tableAddr, FC_SetXonState, Magic_code);
+}
+
+static int moxa_get_serial_info(struct moxa_port *info,
+		struct serial_struct __user *retinfo)
+{
+	struct serial_struct tmp = {
+		.type = info->type,
+		.line = info->port.tty->index,
+		.flags = info->port.flags,
+		.baud_base = 921600,
+		.close_delay = info->port.close_delay
+	};
+	return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
+}
+
+
+static int moxa_set_serial_info(struct moxa_port *info,
+		struct serial_struct __user *new_info)
+{
+	struct serial_struct new_serial;
+
+	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+		return -EFAULT;
+
+	if (new_serial.irq != 0 || new_serial.port != 0 ||
+			new_serial.custom_divisor != 0 ||
+			new_serial.baud_base != 921600)
+		return -EPERM;
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if (((new_serial.flags & ~ASYNC_USR_MASK) !=
+		     (info->port.flags & ~ASYNC_USR_MASK)))
+			return -EPERM;
+	} else
+		info->port.close_delay = new_serial.close_delay * HZ / 100;
+
+	new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
+	new_serial.flags |= (info->port.flags & ASYNC_FLAGS);
+
+	MoxaSetFifo(info, new_serial.type == PORT_16550A);
+
+	info->type = new_serial.type;
+	return 0;
+}
+
+
+
+/*****************************************************************************
+ *	Static local functions: 					     *
+ *****************************************************************************/
+
+static void MoxaSetFifo(struct moxa_port *port, int enable)
+{
+	void __iomem *ofsAddr = port->tableAddr;
+
+	if (!enable) {
+		moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
+		moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
+	} else {
+		moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
+		moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
+	}
+}
diff --git a/drivers/tty/moxa.h b/drivers/tty/moxa.h
new file mode 100644
index 000000000000..87d16ce57be7
--- /dev/null
+++ b/drivers/tty/moxa.h
@@ -0,0 +1,304 @@
+#ifndef MOXA_H_FILE
+#define MOXA_H_FILE
+
+#define	MOXA		0x400
+#define MOXA_GET_IQUEUE 	(MOXA + 1)	/* get input buffered count */
+#define MOXA_GET_OQUEUE 	(MOXA + 2)	/* get output buffered count */
+#define MOXA_GETDATACOUNT       (MOXA + 23)
+#define MOXA_GET_IOQUEUE	(MOXA + 27)
+#define MOXA_FLUSH_QUEUE	(MOXA + 28)
+#define MOXA_GETMSTATUS         (MOXA + 65)
+
+/*
+ *    System Configuration
+ */
+
+#define Magic_code	0x404
+
+/*
+ *    for C218 BIOS initialization
+ */
+#define C218_ConfBase	0x800
+#define C218_status	(C218_ConfBase + 0)	/* BIOS running status    */
+#define C218_diag	(C218_ConfBase + 2)	/* diagnostic status      */
+#define C218_key	(C218_ConfBase + 4)	/* WORD (0x218 for C218) */
+#define C218DLoad_len	(C218_ConfBase + 6)	/* WORD           */
+#define C218check_sum	(C218_ConfBase + 8)	/* BYTE           */
+#define C218chksum_ok	(C218_ConfBase + 0x0a)	/* BYTE (1:ok)            */
+#define C218_TestRx	(C218_ConfBase + 0x10)	/* 8 bytes for 8 ports    */
+#define C218_TestTx	(C218_ConfBase + 0x18)	/* 8 bytes for 8 ports    */
+#define C218_RXerr	(C218_ConfBase + 0x20)	/* 8 bytes for 8 ports    */
+#define C218_ErrFlag	(C218_ConfBase + 0x28)	/* 8 bytes for 8 ports    */
+
+#define C218_LoadBuf	0x0F00
+#define C218_KeyCode	0x218
+#define CP204J_KeyCode	0x204
+
+/*
+ *    for C320 BIOS initialization
+ */
+#define C320_ConfBase	0x800
+#define C320_LoadBuf	0x0f00
+#define STS_init	0x05	/* for C320_status        */
+
+#define C320_status	C320_ConfBase + 0	/* BIOS running status    */
+#define C320_diag	C320_ConfBase + 2	/* diagnostic status      */
+#define C320_key	C320_ConfBase + 4	/* WORD (0320H for C320) */
+#define C320DLoad_len	C320_ConfBase + 6	/* WORD           */
+#define C320check_sum	C320_ConfBase + 8	/* WORD           */
+#define C320chksum_ok	C320_ConfBase + 0x0a	/* WORD (1:ok)            */
+#define C320bapi_len	C320_ConfBase + 0x0c	/* WORD           */
+#define C320UART_no	C320_ConfBase + 0x0e	/* WORD           */
+
+#define C320_KeyCode	0x320
+
+#define FixPage_addr	0x0000	/* starting addr of static page  */
+#define DynPage_addr	0x2000	/* starting addr of dynamic page */
+#define C218_start	0x3000	/* starting addr of C218 BIOS prg */
+#define Control_reg	0x1ff0	/* select page and reset control */
+#define HW_reset	0x80
+
+/*
+ *    Function Codes
+ */
+#define FC_CardReset	0x80
+#define FC_ChannelReset 1	/* C320 firmware not supported */
+#define FC_EnableCH	2
+#define FC_DisableCH	3
+#define FC_SetParam	4
+#define FC_SetMode	5
+#define FC_SetRate	6
+#define FC_LineControl	7
+#define FC_LineStatus	8
+#define FC_XmitControl	9
+#define FC_FlushQueue	10
+#define FC_SendBreak	11
+#define FC_StopBreak	12
+#define FC_LoopbackON	13
+#define FC_LoopbackOFF	14
+#define FC_ClrIrqTable	15
+#define FC_SendXon	16
+#define FC_SetTermIrq	17	/* C320 firmware not supported */
+#define FC_SetCntIrq	18	/* C320 firmware not supported */
+#define FC_SetBreakIrq	19
+#define FC_SetLineIrq	20
+#define FC_SetFlowCtl	21
+#define FC_GenIrq	22
+#define FC_InCD180	23
+#define FC_OutCD180	24
+#define FC_InUARTreg	23
+#define FC_OutUARTreg	24
+#define FC_SetXonXoff	25
+#define FC_OutCD180CCR	26
+#define FC_ExtIQueue	27
+#define FC_ExtOQueue	28
+#define FC_ClrLineIrq	29
+#define FC_HWFlowCtl	30
+#define FC_GetClockRate 35
+#define FC_SetBaud	36
+#define FC_SetDataMode  41
+#define FC_GetCCSR      43
+#define FC_GetDataError 45
+#define FC_RxControl	50
+#define FC_ImmSend	51
+#define FC_SetXonState	52
+#define FC_SetXoffState	53
+#define FC_SetRxFIFOTrig 54
+#define FC_SetTxFIFOCnt 55
+#define FC_UnixRate	56
+#define FC_UnixResetTimer 57
+
+#define	RxFIFOTrig1	0
+#define	RxFIFOTrig4	1
+#define	RxFIFOTrig8	2
+#define	RxFIFOTrig14	3
+
+/*
+ *    Dual-Ported RAM
+ */
+#define DRAM_global	0
+#define INT_data	(DRAM_global + 0)
+#define Config_base	(DRAM_global + 0x108)
+
+#define IRQindex	(INT_data + 0)
+#define IRQpending	(INT_data + 4)
+#define IRQtable	(INT_data + 8)
+
+/*
+ *    Interrupt Status
+ */
+#define IntrRx		0x01	/* receiver data O.K.             */
+#define IntrTx		0x02	/* transmit buffer empty  */
+#define IntrFunc	0x04	/* function complete              */
+#define IntrBreak	0x08	/* received break         */
+#define IntrLine	0x10	/* line status change
+				   for transmitter                */
+#define IntrIntr	0x20	/* received INTR code             */
+#define IntrQuit	0x40	/* received QUIT code             */
+#define IntrEOF 	0x80	/* received EOF code              */
+
+#define IntrRxTrigger 	0x100	/* rx data count reach tigger value */
+#define IntrTxTrigger 	0x200	/* tx data count below trigger value */
+
+#define Magic_no	(Config_base + 0)
+#define Card_model_no	(Config_base + 2)
+#define Total_ports	(Config_base + 4)
+#define Module_cnt	(Config_base + 8)
+#define Module_no	(Config_base + 10)
+#define Timer_10ms	(Config_base + 14)
+#define Disable_IRQ	(Config_base + 20)
+#define TMS320_PORT1	(Config_base + 22)
+#define TMS320_PORT2	(Config_base + 24)
+#define TMS320_CLOCK	(Config_base + 26)
+
+/*
+ *    DATA BUFFER in DRAM
+ */
+#define Extern_table	0x400	/* Base address of the external table
+				   (24 words *    64) total 3K bytes
+				   (24 words * 128) total 6K bytes */
+#define Extern_size	0x60	/* 96 bytes                       */
+#define RXrptr		0x00	/* read pointer for RX buffer     */
+#define RXwptr		0x02	/* write pointer for RX buffer    */
+#define TXrptr		0x04	/* read pointer for TX buffer     */
+#define TXwptr		0x06	/* write pointer for TX buffer    */
+#define HostStat	0x08	/* IRQ flag and general flag      */
+#define FlagStat	0x0A
+#define FlowControl	0x0C	/* B7 B6 B5 B4 B3 B2 B1 B0              */
+				/*  x  x  x  x  |  |  |  |            */
+				/*              |  |  |  + CTS flow   */
+				/*              |  |  +--- RTS flow   */
+				/*              |  +------ TX Xon/Xoff */
+				/*              +--------- RX Xon/Xoff */
+#define Break_cnt	0x0E	/* received break count   */
+#define CD180TXirq	0x10	/* if non-0: enable TX irq        */
+#define RX_mask 	0x12
+#define TX_mask 	0x14
+#define Ofs_rxb 	0x16
+#define Ofs_txb 	0x18
+#define Page_rxb	0x1A
+#define Page_txb	0x1C
+#define EndPage_rxb	0x1E
+#define EndPage_txb	0x20
+#define Data_error	0x22
+#define RxTrigger	0x28
+#define TxTrigger	0x2a
+
+#define rRXwptr 	0x34
+#define Low_water	0x36
+
+#define FuncCode	0x40
+#define FuncArg 	0x42
+#define FuncArg1	0x44
+
+#define C218rx_size	0x2000	/* 8K bytes */
+#define C218tx_size	0x8000	/* 32K bytes */
+
+#define C218rx_mask	(C218rx_size - 1)
+#define C218tx_mask	(C218tx_size - 1)
+
+#define C320p8rx_size	0x2000
+#define C320p8tx_size	0x8000
+#define C320p8rx_mask	(C320p8rx_size - 1)
+#define C320p8tx_mask	(C320p8tx_size - 1)
+
+#define C320p16rx_size	0x2000
+#define C320p16tx_size	0x4000
+#define C320p16rx_mask	(C320p16rx_size - 1)
+#define C320p16tx_mask	(C320p16tx_size - 1)
+
+#define C320p24rx_size	0x2000
+#define C320p24tx_size	0x2000
+#define C320p24rx_mask	(C320p24rx_size - 1)
+#define C320p24tx_mask	(C320p24tx_size - 1)
+
+#define C320p32rx_size	0x1000
+#define C320p32tx_size	0x1000
+#define C320p32rx_mask	(C320p32rx_size - 1)
+#define C320p32tx_mask	(C320p32tx_size - 1)
+
+#define Page_size	0x2000U
+#define Page_mask	(Page_size - 1)
+#define C218rx_spage	3
+#define C218tx_spage	4
+#define C218rx_pageno	1
+#define C218tx_pageno	4
+#define C218buf_pageno	5
+
+#define C320p8rx_spage	3
+#define C320p8tx_spage	4
+#define C320p8rx_pgno	1
+#define C320p8tx_pgno	4
+#define C320p8buf_pgno	5
+
+#define C320p16rx_spage 3
+#define C320p16tx_spage 4
+#define C320p16rx_pgno	1
+#define C320p16tx_pgno	2
+#define C320p16buf_pgno 3
+
+#define C320p24rx_spage 3
+#define C320p24tx_spage 4
+#define C320p24rx_pgno	1
+#define C320p24tx_pgno	1
+#define C320p24buf_pgno 2
+
+#define C320p32rx_spage 3
+#define C320p32tx_ofs	C320p32rx_size
+#define C320p32tx_spage 3
+#define C320p32buf_pgno 1
+
+/*
+ *    Host Status
+ */
+#define WakeupRx	0x01
+#define WakeupTx	0x02
+#define WakeupBreak	0x08
+#define WakeupLine	0x10
+#define WakeupIntr	0x20
+#define WakeupQuit	0x40
+#define WakeupEOF	0x80	/* used in VTIME control */
+#define WakeupRxTrigger	0x100
+#define WakeupTxTrigger	0x200
+/*
+ *    Flag status
+ */
+#define Rx_over		0x01
+#define Xoff_state	0x02
+#define Tx_flowOff	0x04
+#define Tx_enable	0x08
+#define CTS_state	0x10
+#define DSR_state	0x20
+#define DCD_state	0x80
+/*
+ *    FlowControl
+ */
+#define CTS_FlowCtl	1
+#define RTS_FlowCtl	2
+#define Tx_FlowCtl	4
+#define Rx_FlowCtl	8
+#define IXM_IXANY	0x10
+
+#define LowWater	128
+
+#define DTR_ON		1
+#define RTS_ON		2
+#define CTS_ON		1
+#define DSR_ON		2
+#define DCD_ON		8
+
+/* mode definition */
+#define	MX_CS8		0x03
+#define	MX_CS7		0x02
+#define	MX_CS6		0x01
+#define	MX_CS5		0x00
+
+#define	MX_STOP1	0x00
+#define	MX_STOP15	0x04
+#define	MX_STOP2	0x08
+
+#define	MX_PARNONE	0x00
+#define	MX_PAREVEN	0x40
+#define	MX_PARODD	0xC0
+
+#endif
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
new file mode 100644
index 000000000000..d188f378684d
--- /dev/null
+++ b/drivers/tty/mxser.c
@@ -0,0 +1,2757 @@
+/*
+ *          mxser.c  -- MOXA Smartio/Industio family multiport serial driver.
+ *
+ *      Copyright (C) 1999-2006  Moxa Technologies (support@moxa.com).
+ *	Copyright (C) 2006-2008  Jiri Slaby <jirislaby@gmail.com>
+ *
+ *      This code is loosely based on the 1.8 moxa driver which is based on
+ *	Linux serial driver, written by Linus Torvalds, Theodore T'so and
+ *	others.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *	Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
+ *	<alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on
+ *	www.moxa.com.
+ *	- Fixed x86_64 cleanness
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "mxser.h"
+
+#define	MXSER_VERSION	"2.0.5"		/* 1.14 */
+#define	MXSERMAJOR	 174
+
+#define MXSER_BOARDS		4	/* Max. boards */
+#define MXSER_PORTS_PER_BOARD	8	/* Max. ports per board */
+#define MXSER_PORTS		(MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
+#define MXSER_ISR_PASS_LIMIT	100
+
+/*CheckIsMoxaMust return value*/
+#define MOXA_OTHER_UART		0x00
+#define MOXA_MUST_MU150_HWID	0x01
+#define MOXA_MUST_MU860_HWID	0x02
+
+#define WAKEUP_CHARS		256
+
+#define UART_MCR_AFE		0x20
+#define UART_LSR_SPECIAL	0x1E
+
+#define PCI_DEVICE_ID_POS104UL	0x1044
+#define PCI_DEVICE_ID_CB108	0x1080
+#define PCI_DEVICE_ID_CP102UF	0x1023
+#define PCI_DEVICE_ID_CP112UL	0x1120
+#define PCI_DEVICE_ID_CB114	0x1142
+#define PCI_DEVICE_ID_CP114UL	0x1143
+#define PCI_DEVICE_ID_CB134I	0x1341
+#define PCI_DEVICE_ID_CP138U	0x1380
+
+
+#define C168_ASIC_ID    1
+#define C104_ASIC_ID    2
+#define C102_ASIC_ID	0xB
+#define CI132_ASIC_ID	4
+#define CI134_ASIC_ID	3
+#define CI104J_ASIC_ID  5
+
+#define MXSER_HIGHBAUD	1
+#define MXSER_HAS2	2
+
+/* This is only for PCI */
+static const struct {
+	int type;
+	int tx_fifo;
+	int rx_fifo;
+	int xmit_fifo_size;
+	int rx_high_water;
+	int rx_trigger;
+	int rx_low_water;
+	long max_baud;
+} Gpci_uart_info[] = {
+	{MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L},
+	{MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L},
+	{MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L}
+};
+#define UART_INFO_NUM	ARRAY_SIZE(Gpci_uart_info)
+
+struct mxser_cardinfo {
+	char *name;
+	unsigned int nports;
+	unsigned int flags;
+};
+
+static const struct mxser_cardinfo mxser_cards[] = {
+/* 0*/	{ "C168 series",	8, },
+	{ "C104 series",	4, },
+	{ "CI-104J series",	4, },
+	{ "C168H/PCI series",	8, },
+	{ "C104H/PCI series",	4, },
+/* 5*/	{ "C102 series",	4, MXSER_HAS2 },	/* C102-ISA */
+	{ "CI-132 series",	4, MXSER_HAS2 },
+	{ "CI-134 series",	4, },
+	{ "CP-132 series",	2, },
+	{ "CP-114 series",	4, },
+/*10*/	{ "CT-114 series",	4, },
+	{ "CP-102 series",	2, MXSER_HIGHBAUD },
+	{ "CP-104U series",	4, },
+	{ "CP-168U series",	8, },
+	{ "CP-132U series",	2, },
+/*15*/	{ "CP-134U series",	4, },
+	{ "CP-104JU series",	4, },
+	{ "Moxa UC7000 Serial",	8, },		/* RC7000 */
+	{ "CP-118U series",	8, },
+	{ "CP-102UL series",	2, },
+/*20*/	{ "CP-102U series",	2, },
+	{ "CP-118EL series",	8, },
+	{ "CP-168EL series",	8, },
+	{ "CP-104EL series",	4, },
+	{ "CB-108 series",	8, },
+/*25*/	{ "CB-114 series",	4, },
+	{ "CB-134I series",	4, },
+	{ "CP-138U series",	8, },
+	{ "POS-104UL series",	4, },
+	{ "CP-114UL series",	4, },
+/*30*/	{ "CP-102UF series",	2, },
+	{ "CP-112UL series",	2, },
+};
+
+/* driver_data correspond to the lines in the structure above
+   see also ISA probe function before you change something */
+static struct pci_device_id mxser_pcibrds[] = {
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168),	.driver_data = 3 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104),	.driver_data = 4 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132),	.driver_data = 8 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114),	.driver_data = 9 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114),	.driver_data = 10 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102),	.driver_data = 11 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U),	.driver_data = 12 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U),	.driver_data = 13 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U),	.driver_data = 14 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U),	.driver_data = 15 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000),	.driver_data = 17 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U),	.driver_data = 18 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U),	.driver_data = 20 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108),	.driver_data = 24 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114),	.driver_data = 25 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I),	.driver_data = 26 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U),	.driver_data = 27 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL),	.driver_data = 28 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL),	.driver_data = 29 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF),	.driver_data = 30 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL),	.driver_data = 31 },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
+
+static unsigned long ioaddr[MXSER_BOARDS];
+static int ttymajor = MXSERMAJOR;
+
+/* Variables for insmod */
+
+MODULE_AUTHOR("Casper Yang");
+MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
+module_param_array(ioaddr, ulong, NULL, 0);
+MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board");
+module_param(ttymajor, int, 0);
+MODULE_LICENSE("GPL");
+
+struct mxser_log {
+	int tick;
+	unsigned long rxcnt[MXSER_PORTS];
+	unsigned long txcnt[MXSER_PORTS];
+};
+
+struct mxser_mon {
+	unsigned long rxcnt;
+	unsigned long txcnt;
+	unsigned long up_rxcnt;
+	unsigned long up_txcnt;
+	int modem_status;
+	unsigned char hold_reason;
+};
+
+struct mxser_mon_ext {
+	unsigned long rx_cnt[32];
+	unsigned long tx_cnt[32];
+	unsigned long up_rxcnt[32];
+	unsigned long up_txcnt[32];
+	int modem_status[32];
+
+	long baudrate[32];
+	int databits[32];
+	int stopbits[32];
+	int parity[32];
+	int flowctrl[32];
+	int fifo[32];
+	int iftype[32];
+};
+
+struct mxser_board;
+
+struct mxser_port {
+	struct tty_port port;
+	struct mxser_board *board;
+
+	unsigned long ioaddr;
+	unsigned long opmode_ioaddr;
+	int max_baud;
+
+	int rx_high_water;
+	int rx_trigger;		/* Rx fifo trigger level */
+	int rx_low_water;
+	int baud_base;		/* max. speed */
+	int type;		/* UART type */
+
+	int x_char;		/* xon/xoff character */
+	int IER;		/* Interrupt Enable Register */
+	int MCR;		/* Modem control register */
+
+	unsigned char stop_rx;
+	unsigned char ldisc_stop_rx;
+
+	int custom_divisor;
+	unsigned char err_shadow;
+
+	struct async_icount icount; /* kernel counters for 4 input interrupts */
+	int timeout;
+
+	int read_status_mask;
+	int ignore_status_mask;
+	int xmit_fifo_size;
+	int xmit_head;
+	int xmit_tail;
+	int xmit_cnt;
+
+	struct ktermios normal_termios;
+
+	struct mxser_mon mon_data;
+
+	spinlock_t slock;
+};
+
+struct mxser_board {
+	unsigned int idx;
+	int irq;
+	const struct mxser_cardinfo *info;
+	unsigned long vector;
+	unsigned long vector_mask;
+
+	int chip_flag;
+	int uart_type;
+
+	struct mxser_port ports[MXSER_PORTS_PER_BOARD];
+};
+
+struct mxser_mstatus {
+	tcflag_t cflag;
+	int cts;
+	int dsr;
+	int ri;
+	int dcd;
+};
+
+static struct mxser_board mxser_boards[MXSER_BOARDS];
+static struct tty_driver *mxvar_sdriver;
+static struct mxser_log mxvar_log;
+static int mxser_set_baud_method[MXSER_PORTS + 1];
+
+static void mxser_enable_must_enchance_mode(unsigned long baseio)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(baseio + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+	efr |= MOXA_MUST_EFR_EFRB_ENABLE;
+
+	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+	outb(oldlcr, baseio + UART_LCR);
+}
+
+#ifdef	CONFIG_PCI
+static void mxser_disable_must_enchance_mode(unsigned long baseio)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(baseio + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+	efr &= ~MOXA_MUST_EFR_EFRB_ENABLE;
+
+	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+	outb(oldlcr, baseio + UART_LCR);
+}
+#endif
+
+static void mxser_set_must_xon1_value(unsigned long baseio, u8 value)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(baseio + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+	efr &= ~MOXA_MUST_EFR_BANK_MASK;
+	efr |= MOXA_MUST_EFR_BANK0;
+
+	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+	outb(value, baseio + MOXA_MUST_XON1_REGISTER);
+	outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(baseio + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+	efr &= ~MOXA_MUST_EFR_BANK_MASK;
+	efr |= MOXA_MUST_EFR_BANK0;
+
+	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+	outb(value, baseio + MOXA_MUST_XOFF1_REGISTER);
+	outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_set_must_fifo_value(struct mxser_port *info)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(info->ioaddr + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR);
+
+	efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER);
+	efr &= ~MOXA_MUST_EFR_BANK_MASK;
+	efr |= MOXA_MUST_EFR_BANK1;
+
+	outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER);
+	outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER);
+	outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER);
+	outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER);
+	outb(oldlcr, info->ioaddr + UART_LCR);
+}
+
+static void mxser_set_must_enum_value(unsigned long baseio, u8 value)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(baseio + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+	efr &= ~MOXA_MUST_EFR_BANK_MASK;
+	efr |= MOXA_MUST_EFR_BANK2;
+
+	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+	outb(value, baseio + MOXA_MUST_ENUM_REGISTER);
+	outb(oldlcr, baseio + UART_LCR);
+}
+
+#ifdef CONFIG_PCI
+static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(baseio + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+	efr &= ~MOXA_MUST_EFR_BANK_MASK;
+	efr |= MOXA_MUST_EFR_BANK2;
+
+	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+	*pId = inb(baseio + MOXA_MUST_HWID_REGISTER);
+	outb(oldlcr, baseio + UART_LCR);
+}
+#endif
+
+static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(baseio + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+	efr &= ~MOXA_MUST_EFR_SF_MASK;
+
+	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+	outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_enable_must_tx_software_flow_control(unsigned long baseio)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(baseio + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+	efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
+	efr |= MOXA_MUST_EFR_SF_TX1;
+
+	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+	outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_disable_must_tx_software_flow_control(unsigned long baseio)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(baseio + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+	efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
+
+	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+	outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_enable_must_rx_software_flow_control(unsigned long baseio)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(baseio + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+	efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
+	efr |= MOXA_MUST_EFR_SF_RX1;
+
+	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+	outb(oldlcr, baseio + UART_LCR);
+}
+
+static void mxser_disable_must_rx_software_flow_control(unsigned long baseio)
+{
+	u8 oldlcr;
+	u8 efr;
+
+	oldlcr = inb(baseio + UART_LCR);
+	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
+
+	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
+	efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
+
+	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
+	outb(oldlcr, baseio + UART_LCR);
+}
+
+#ifdef CONFIG_PCI
+static int __devinit CheckIsMoxaMust(unsigned long io)
+{
+	u8 oldmcr, hwid;
+	int i;
+
+	outb(0, io + UART_LCR);
+	mxser_disable_must_enchance_mode(io);
+	oldmcr = inb(io + UART_MCR);
+	outb(0, io + UART_MCR);
+	mxser_set_must_xon1_value(io, 0x11);
+	if ((hwid = inb(io + UART_MCR)) != 0) {
+		outb(oldmcr, io + UART_MCR);
+		return MOXA_OTHER_UART;
+	}
+
+	mxser_get_must_hardware_id(io, &hwid);
+	for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */
+		if (hwid == Gpci_uart_info[i].type)
+			return (int)hwid;
+	}
+	return MOXA_OTHER_UART;
+}
+#endif
+
+static void process_txrx_fifo(struct mxser_port *info)
+{
+	int i;
+
+	if ((info->type == PORT_16450) || (info->type == PORT_8250)) {
+		info->rx_trigger = 1;
+		info->rx_high_water = 1;
+		info->rx_low_water = 1;
+		info->xmit_fifo_size = 1;
+	} else
+		for (i = 0; i < UART_INFO_NUM; i++)
+			if (info->board->chip_flag == Gpci_uart_info[i].type) {
+				info->rx_trigger = Gpci_uart_info[i].rx_trigger;
+				info->rx_low_water = Gpci_uart_info[i].rx_low_water;
+				info->rx_high_water = Gpci_uart_info[i].rx_high_water;
+				info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size;
+				break;
+			}
+}
+
+static unsigned char mxser_get_msr(int baseaddr, int mode, int port)
+{
+	static unsigned char mxser_msr[MXSER_PORTS + 1];
+	unsigned char status = 0;
+
+	status = inb(baseaddr + UART_MSR);
+
+	mxser_msr[port] &= 0x0F;
+	mxser_msr[port] |= status;
+	status = mxser_msr[port];
+	if (mode)
+		mxser_msr[port] = 0;
+
+	return status;
+}
+
+static int mxser_carrier_raised(struct tty_port *port)
+{
+	struct mxser_port *mp = container_of(port, struct mxser_port, port);
+	return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0;
+}
+
+static void mxser_dtr_rts(struct tty_port *port, int on)
+{
+	struct mxser_port *mp = container_of(port, struct mxser_port, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mp->slock, flags);
+	if (on)
+		outb(inb(mp->ioaddr + UART_MCR) |
+			UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
+	else
+		outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS),
+			mp->ioaddr + UART_MCR);
+	spin_unlock_irqrestore(&mp->slock, flags);
+}
+
+static int mxser_set_baud(struct tty_struct *tty, long newspd)
+{
+	struct mxser_port *info = tty->driver_data;
+	int quot = 0, baud;
+	unsigned char cval;
+
+	if (!info->ioaddr)
+		return -1;
+
+	if (newspd > info->max_baud)
+		return -1;
+
+	if (newspd == 134) {
+		quot = 2 * info->baud_base / 269;
+		tty_encode_baud_rate(tty, 134, 134);
+	} else if (newspd) {
+		quot = info->baud_base / newspd;
+		if (quot == 0)
+			quot = 1;
+		baud = info->baud_base/quot;
+		tty_encode_baud_rate(tty, baud, baud);
+	} else {
+		quot = 0;
+	}
+
+	info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
+	info->timeout += HZ / 50;	/* Add .02 seconds of slop */
+
+	if (quot) {
+		info->MCR |= UART_MCR_DTR;
+		outb(info->MCR, info->ioaddr + UART_MCR);
+	} else {
+		info->MCR &= ~UART_MCR_DTR;
+		outb(info->MCR, info->ioaddr + UART_MCR);
+		return 0;
+	}
+
+	cval = inb(info->ioaddr + UART_LCR);
+
+	outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR);	/* set DLAB */
+
+	outb(quot & 0xff, info->ioaddr + UART_DLL);	/* LS of divisor */
+	outb(quot >> 8, info->ioaddr + UART_DLM);	/* MS of divisor */
+	outb(cval, info->ioaddr + UART_LCR);	/* reset DLAB */
+
+#ifdef BOTHER
+	if (C_BAUD(tty) == BOTHER) {
+		quot = info->baud_base % newspd;
+		quot *= 8;
+		if (quot % newspd > newspd / 2) {
+			quot /= newspd;
+			quot++;
+		} else
+			quot /= newspd;
+
+		mxser_set_must_enum_value(info->ioaddr, quot);
+	} else
+#endif
+		mxser_set_must_enum_value(info->ioaddr, 0);
+
+	return 0;
+}
+
+/*
+ * This routine is called to set the UART divisor registers to match
+ * the specified baud rate for a serial port.
+ */
+static int mxser_change_speed(struct tty_struct *tty,
+					struct ktermios *old_termios)
+{
+	struct mxser_port *info = tty->driver_data;
+	unsigned cflag, cval, fcr;
+	int ret = 0;
+	unsigned char status;
+
+	cflag = tty->termios->c_cflag;
+	if (!info->ioaddr)
+		return ret;
+
+	if (mxser_set_baud_method[tty->index] == 0)
+		mxser_set_baud(tty, tty_get_baud_rate(tty));
+
+	/* byte size and parity */
+	switch (cflag & CSIZE) {
+	case CS5:
+		cval = 0x00;
+		break;
+	case CS6:
+		cval = 0x01;
+		break;
+	case CS7:
+		cval = 0x02;
+		break;
+	case CS8:
+		cval = 0x03;
+		break;
+	default:
+		cval = 0x00;
+		break;		/* too keep GCC shut... */
+	}
+	if (cflag & CSTOPB)
+		cval |= 0x04;
+	if (cflag & PARENB)
+		cval |= UART_LCR_PARITY;
+	if (!(cflag & PARODD))
+		cval |= UART_LCR_EPAR;
+	if (cflag & CMSPAR)
+		cval |= UART_LCR_SPAR;
+
+	if ((info->type == PORT_8250) || (info->type == PORT_16450)) {
+		if (info->board->chip_flag) {
+			fcr = UART_FCR_ENABLE_FIFO;
+			fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
+			mxser_set_must_fifo_value(info);
+		} else
+			fcr = 0;
+	} else {
+		fcr = UART_FCR_ENABLE_FIFO;
+		if (info->board->chip_flag) {
+			fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
+			mxser_set_must_fifo_value(info);
+		} else {
+			switch (info->rx_trigger) {
+			case 1:
+				fcr |= UART_FCR_TRIGGER_1;
+				break;
+			case 4:
+				fcr |= UART_FCR_TRIGGER_4;
+				break;
+			case 8:
+				fcr |= UART_FCR_TRIGGER_8;
+				break;
+			default:
+				fcr |= UART_FCR_TRIGGER_14;
+				break;
+			}
+		}
+	}
+
+	/* CTS flow control flag and modem status interrupts */
+	info->IER &= ~UART_IER_MSI;
+	info->MCR &= ~UART_MCR_AFE;
+	if (cflag & CRTSCTS) {
+		info->port.flags |= ASYNC_CTS_FLOW;
+		info->IER |= UART_IER_MSI;
+		if ((info->type == PORT_16550A) || (info->board->chip_flag)) {
+			info->MCR |= UART_MCR_AFE;
+		} else {
+			status = inb(info->ioaddr + UART_MSR);
+			if (tty->hw_stopped) {
+				if (status & UART_MSR_CTS) {
+					tty->hw_stopped = 0;
+					if (info->type != PORT_16550A &&
+							!info->board->chip_flag) {
+						outb(info->IER & ~UART_IER_THRI,
+							info->ioaddr +
+							UART_IER);
+						info->IER |= UART_IER_THRI;
+						outb(info->IER, info->ioaddr +
+								UART_IER);
+					}
+					tty_wakeup(tty);
+				}
+			} else {
+				if (!(status & UART_MSR_CTS)) {
+					tty->hw_stopped = 1;
+					if ((info->type != PORT_16550A) &&
+							(!info->board->chip_flag)) {
+						info->IER &= ~UART_IER_THRI;
+						outb(info->IER, info->ioaddr +
+								UART_IER);
+					}
+				}
+			}
+		}
+	} else {
+		info->port.flags &= ~ASYNC_CTS_FLOW;
+	}
+	outb(info->MCR, info->ioaddr + UART_MCR);
+	if (cflag & CLOCAL) {
+		info->port.flags &= ~ASYNC_CHECK_CD;
+	} else {
+		info->port.flags |= ASYNC_CHECK_CD;
+		info->IER |= UART_IER_MSI;
+	}
+	outb(info->IER, info->ioaddr + UART_IER);
+
+	/*
+	 * Set up parity check flag
+	 */
+	info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+	if (I_INPCK(tty))
+		info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+	if (I_BRKINT(tty) || I_PARMRK(tty))
+		info->read_status_mask |= UART_LSR_BI;
+
+	info->ignore_status_mask = 0;
+
+	if (I_IGNBRK(tty)) {
+		info->ignore_status_mask |= UART_LSR_BI;
+		info->read_status_mask |= UART_LSR_BI;
+		/*
+		 * If we're ignore parity and break indicators, ignore
+		 * overruns too.  (For real raw support).
+		 */
+		if (I_IGNPAR(tty)) {
+			info->ignore_status_mask |=
+						UART_LSR_OE |
+						UART_LSR_PE |
+						UART_LSR_FE;
+			info->read_status_mask |=
+						UART_LSR_OE |
+						UART_LSR_PE |
+						UART_LSR_FE;
+		}
+	}
+	if (info->board->chip_flag) {
+		mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty));
+		mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty));
+		if (I_IXON(tty)) {
+			mxser_enable_must_rx_software_flow_control(
+					info->ioaddr);
+		} else {
+			mxser_disable_must_rx_software_flow_control(
+					info->ioaddr);
+		}
+		if (I_IXOFF(tty)) {
+			mxser_enable_must_tx_software_flow_control(
+					info->ioaddr);
+		} else {
+			mxser_disable_must_tx_software_flow_control(
+					info->ioaddr);
+		}
+	}
+
+
+	outb(fcr, info->ioaddr + UART_FCR);	/* set fcr */
+	outb(cval, info->ioaddr + UART_LCR);
+
+	return ret;
+}
+
+static void mxser_check_modem_status(struct tty_struct *tty,
+				struct mxser_port *port, int status)
+{
+	/* update input line counters */
+	if (status & UART_MSR_TERI)
+		port->icount.rng++;
+	if (status & UART_MSR_DDSR)
+		port->icount.dsr++;
+	if (status & UART_MSR_DDCD)
+		port->icount.dcd++;
+	if (status & UART_MSR_DCTS)
+		port->icount.cts++;
+	port->mon_data.modem_status = status;
+	wake_up_interruptible(&port->port.delta_msr_wait);
+
+	if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
+		if (status & UART_MSR_DCD)
+			wake_up_interruptible(&port->port.open_wait);
+	}
+
+	if (port->port.flags & ASYNC_CTS_FLOW) {
+		if (tty->hw_stopped) {
+			if (status & UART_MSR_CTS) {
+				tty->hw_stopped = 0;
+
+				if ((port->type != PORT_16550A) &&
+						(!port->board->chip_flag)) {
+					outb(port->IER & ~UART_IER_THRI,
+						port->ioaddr + UART_IER);
+					port->IER |= UART_IER_THRI;
+					outb(port->IER, port->ioaddr +
+							UART_IER);
+				}
+				tty_wakeup(tty);
+			}
+		} else {
+			if (!(status & UART_MSR_CTS)) {
+				tty->hw_stopped = 1;
+				if (port->type != PORT_16550A &&
+						!port->board->chip_flag) {
+					port->IER &= ~UART_IER_THRI;
+					outb(port->IER, port->ioaddr +
+							UART_IER);
+				}
+			}
+		}
+	}
+}
+
+static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
+{
+	struct mxser_port *info = container_of(port, struct mxser_port, port);
+	unsigned long page;
+	unsigned long flags;
+
+	page = __get_free_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&info->slock, flags);
+
+	if (!info->ioaddr || !info->type) {
+		set_bit(TTY_IO_ERROR, &tty->flags);
+		free_page(page);
+		spin_unlock_irqrestore(&info->slock, flags);
+		return 0;
+	}
+	info->port.xmit_buf = (unsigned char *) page;
+
+	/*
+	 * Clear the FIFO buffers and disable them
+	 * (they will be reenabled in mxser_change_speed())
+	 */
+	if (info->board->chip_flag)
+		outb((UART_FCR_CLEAR_RCVR |
+			UART_FCR_CLEAR_XMIT |
+			MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR);
+	else
+		outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
+			info->ioaddr + UART_FCR);
+
+	/*
+	 * At this point there's no way the LSR could still be 0xFF;
+	 * if it is, then bail out, because there's likely no UART
+	 * here.
+	 */
+	if (inb(info->ioaddr + UART_LSR) == 0xff) {
+		spin_unlock_irqrestore(&info->slock, flags);
+		if (capable(CAP_SYS_ADMIN)) {
+			set_bit(TTY_IO_ERROR, &tty->flags);
+			return 0;
+		} else
+			return -ENODEV;
+	}
+
+	/*
+	 * Clear the interrupt registers.
+	 */
+	(void) inb(info->ioaddr + UART_LSR);
+	(void) inb(info->ioaddr + UART_RX);
+	(void) inb(info->ioaddr + UART_IIR);
+	(void) inb(info->ioaddr + UART_MSR);
+
+	/*
+	 * Now, initialize the UART
+	 */
+	outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR);	/* reset DLAB */
+	info->MCR = UART_MCR_DTR | UART_MCR_RTS;
+	outb(info->MCR, info->ioaddr + UART_MCR);
+
+	/*
+	 * Finally, enable interrupts
+	 */
+	info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
+
+	if (info->board->chip_flag)
+		info->IER |= MOXA_MUST_IER_EGDAI;
+	outb(info->IER, info->ioaddr + UART_IER);	/* enable interrupts */
+
+	/*
+	 * And clear the interrupt registers again for luck.
+	 */
+	(void) inb(info->ioaddr + UART_LSR);
+	(void) inb(info->ioaddr + UART_RX);
+	(void) inb(info->ioaddr + UART_IIR);
+	(void) inb(info->ioaddr + UART_MSR);
+
+	clear_bit(TTY_IO_ERROR, &tty->flags);
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+	/*
+	 * and set the speed of the serial port
+	 */
+	mxser_change_speed(tty, NULL);
+	spin_unlock_irqrestore(&info->slock, flags);
+
+	return 0;
+}
+
+/*
+ * This routine will shutdown a serial port
+ */
+static void mxser_shutdown_port(struct tty_port *port)
+{
+	struct mxser_port *info = container_of(port, struct mxser_port, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->slock, flags);
+
+	/*
+	 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
+	 * here so the queue might never be waken up
+	 */
+	wake_up_interruptible(&info->port.delta_msr_wait);
+
+	/*
+	 * Free the xmit buffer, if necessary
+	 */
+	if (info->port.xmit_buf) {
+		free_page((unsigned long) info->port.xmit_buf);
+		info->port.xmit_buf = NULL;
+	}
+
+	info->IER = 0;
+	outb(0x00, info->ioaddr + UART_IER);
+
+	/* clear Rx/Tx FIFO's */
+	if (info->board->chip_flag)
+		outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
+				MOXA_MUST_FCR_GDA_MODE_ENABLE,
+				info->ioaddr + UART_FCR);
+	else
+		outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+			info->ioaddr + UART_FCR);
+
+	/* read data port to reset things */
+	(void) inb(info->ioaddr + UART_RX);
+
+
+	if (info->board->chip_flag)
+		SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+
+	spin_unlock_irqrestore(&info->slock, flags);
+}
+
+/*
+ * This routine is called whenever a serial port is opened.  It
+ * enables interrupts for a serial port, linking in its async structure into
+ * the IRQ chain.   It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+static int mxser_open(struct tty_struct *tty, struct file *filp)
+{
+	struct mxser_port *info;
+	int line;
+
+	line = tty->index;
+	if (line == MXSER_PORTS)
+		return 0;
+	if (line < 0 || line > MXSER_PORTS)
+		return -ENODEV;
+	info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD];
+	if (!info->ioaddr)
+		return -ENODEV;
+
+	tty->driver_data = info;
+	return tty_port_open(&info->port, tty, filp);
+}
+
+static void mxser_flush_buffer(struct tty_struct *tty)
+{
+	struct mxser_port *info = tty->driver_data;
+	char fcr;
+	unsigned long flags;
+
+
+	spin_lock_irqsave(&info->slock, flags);
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+	fcr = inb(info->ioaddr + UART_FCR);
+	outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
+		info->ioaddr + UART_FCR);
+	outb(fcr, info->ioaddr + UART_FCR);
+
+	spin_unlock_irqrestore(&info->slock, flags);
+
+	tty_wakeup(tty);
+}
+
+
+static void mxser_close_port(struct tty_port *port)
+{
+	struct mxser_port *info = container_of(port, struct mxser_port, port);
+	unsigned long timeout;
+	/*
+	 * At this point we stop accepting input.  To do this, we
+	 * disable the receive line status interrupts, and tell the
+	 * interrupt driver to stop checking the data ready bit in the
+	 * line status register.
+	 */
+	info->IER &= ~UART_IER_RLSI;
+	if (info->board->chip_flag)
+		info->IER &= ~MOXA_MUST_RECV_ISR;
+
+	outb(info->IER, info->ioaddr + UART_IER);
+	/*
+	 * Before we drop DTR, make sure the UART transmitter
+	 * has completely drained; this is especially
+	 * important if there is a transmit FIFO!
+	 */
+	timeout = jiffies + HZ;
+	while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) {
+		schedule_timeout_interruptible(5);
+		if (time_after(jiffies, timeout))
+			break;
+	}
+}
+
+/*
+ * This routine is called when the serial port gets closed.  First, we
+ * wait for the last remaining data to be sent.  Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ */
+static void mxser_close(struct tty_struct *tty, struct file *filp)
+{
+	struct mxser_port *info = tty->driver_data;
+	struct tty_port *port = &info->port;
+
+	if (tty->index == MXSER_PORTS || info == NULL)
+		return;
+	if (tty_port_close_start(port, tty, filp) == 0)
+		return;
+	mutex_lock(&port->mutex);
+	mxser_close_port(port);
+	mxser_flush_buffer(tty);
+	mxser_shutdown_port(port);
+	clear_bit(ASYNCB_INITIALIZED, &port->flags);
+	mutex_unlock(&port->mutex);
+	/* Right now the tty_port set is done outside of the close_end helper
+	   as we don't yet have everyone using refcounts */	
+	tty_port_close_end(port, tty);
+	tty_port_tty_set(port, NULL);
+}
+
+static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+	int c, total = 0;
+	struct mxser_port *info = tty->driver_data;
+	unsigned long flags;
+
+	if (!info->port.xmit_buf)
+		return 0;
+
+	while (1) {
+		c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+					  SERIAL_XMIT_SIZE - info->xmit_head));
+		if (c <= 0)
+			break;
+
+		memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
+		spin_lock_irqsave(&info->slock, flags);
+		info->xmit_head = (info->xmit_head + c) &
+				  (SERIAL_XMIT_SIZE - 1);
+		info->xmit_cnt += c;
+		spin_unlock_irqrestore(&info->slock, flags);
+
+		buf += c;
+		count -= c;
+		total += c;
+	}
+
+	if (info->xmit_cnt && !tty->stopped) {
+		if (!tty->hw_stopped ||
+				(info->type == PORT_16550A) ||
+				(info->board->chip_flag)) {
+			spin_lock_irqsave(&info->slock, flags);
+			outb(info->IER & ~UART_IER_THRI, info->ioaddr +
+					UART_IER);
+			info->IER |= UART_IER_THRI;
+			outb(info->IER, info->ioaddr + UART_IER);
+			spin_unlock_irqrestore(&info->slock, flags);
+		}
+	}
+	return total;
+}
+
+static int mxser_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct mxser_port *info = tty->driver_data;
+	unsigned long flags;
+
+	if (!info->port.xmit_buf)
+		return 0;
+
+	if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
+		return 0;
+
+	spin_lock_irqsave(&info->slock, flags);
+	info->port.xmit_buf[info->xmit_head++] = ch;
+	info->xmit_head &= SERIAL_XMIT_SIZE - 1;
+	info->xmit_cnt++;
+	spin_unlock_irqrestore(&info->slock, flags);
+	if (!tty->stopped) {
+		if (!tty->hw_stopped ||
+				(info->type == PORT_16550A) ||
+				info->board->chip_flag) {
+			spin_lock_irqsave(&info->slock, flags);
+			outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
+			info->IER |= UART_IER_THRI;
+			outb(info->IER, info->ioaddr + UART_IER);
+			spin_unlock_irqrestore(&info->slock, flags);
+		}
+	}
+	return 1;
+}
+
+
+static void mxser_flush_chars(struct tty_struct *tty)
+{
+	struct mxser_port *info = tty->driver_data;
+	unsigned long flags;
+
+	if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf ||
+			(tty->hw_stopped && info->type != PORT_16550A &&
+			 !info->board->chip_flag))
+		return;
+
+	spin_lock_irqsave(&info->slock, flags);
+
+	outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
+	info->IER |= UART_IER_THRI;
+	outb(info->IER, info->ioaddr + UART_IER);
+
+	spin_unlock_irqrestore(&info->slock, flags);
+}
+
+static int mxser_write_room(struct tty_struct *tty)
+{
+	struct mxser_port *info = tty->driver_data;
+	int ret;
+
+	ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
+	return ret < 0 ? 0 : ret;
+}
+
+static int mxser_chars_in_buffer(struct tty_struct *tty)
+{
+	struct mxser_port *info = tty->driver_data;
+	return info->xmit_cnt;
+}
+
+/*
+ * ------------------------------------------------------------
+ * friends of mxser_ioctl()
+ * ------------------------------------------------------------
+ */
+static int mxser_get_serial_info(struct tty_struct *tty,
+		struct serial_struct __user *retinfo)
+{
+	struct mxser_port *info = tty->driver_data;
+	struct serial_struct tmp = {
+		.type = info->type,
+		.line = tty->index,
+		.port = info->ioaddr,
+		.irq = info->board->irq,
+		.flags = info->port.flags,
+		.baud_base = info->baud_base,
+		.close_delay = info->port.close_delay,
+		.closing_wait = info->port.closing_wait,
+		.custom_divisor = info->custom_divisor,
+		.hub6 = 0
+	};
+	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+static int mxser_set_serial_info(struct tty_struct *tty,
+		struct serial_struct __user *new_info)
+{
+	struct mxser_port *info = tty->driver_data;
+	struct tty_port *port = &info->port;
+	struct serial_struct new_serial;
+	speed_t baud;
+	unsigned long sl_flags;
+	unsigned int flags;
+	int retval = 0;
+
+	if (!new_info || !info->ioaddr)
+		return -ENODEV;
+	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+		return -EFAULT;
+
+	if (new_serial.irq != info->board->irq ||
+			new_serial.port != info->ioaddr)
+		return -EINVAL;
+
+	flags = port->flags & ASYNC_SPD_MASK;
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((new_serial.baud_base != info->baud_base) ||
+				(new_serial.close_delay != info->port.close_delay) ||
+				((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK)))
+			return -EPERM;
+		info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
+				(new_serial.flags & ASYNC_USR_MASK));
+	} else {
+		/*
+		 * OK, past this point, all the error checking has been done.
+		 * At this point, we start making changes.....
+		 */
+		port->flags = ((port->flags & ~ASYNC_FLAGS) |
+				(new_serial.flags & ASYNC_FLAGS));
+		port->close_delay = new_serial.close_delay * HZ / 100;
+		port->closing_wait = new_serial.closing_wait * HZ / 100;
+		tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+		if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
+				(new_serial.baud_base != info->baud_base ||
+				new_serial.custom_divisor !=
+				info->custom_divisor)) {
+			if (new_serial.custom_divisor == 0)
+				return -EINVAL;
+			baud = new_serial.baud_base / new_serial.custom_divisor;
+			tty_encode_baud_rate(tty, baud, baud);
+		}
+	}
+
+	info->type = new_serial.type;
+
+	process_txrx_fifo(info);
+
+	if (test_bit(ASYNCB_INITIALIZED, &port->flags)) {
+		if (flags != (port->flags & ASYNC_SPD_MASK)) {
+			spin_lock_irqsave(&info->slock, sl_flags);
+			mxser_change_speed(tty, NULL);
+			spin_unlock_irqrestore(&info->slock, sl_flags);
+		}
+	} else {
+		retval = mxser_activate(port, tty);
+		if (retval == 0)
+			set_bit(ASYNCB_INITIALIZED, &port->flags);
+	}
+	return retval;
+}
+
+/*
+ * mxser_get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ *	    is emptied.  On bus types like RS485, the transmitter must
+ *	    release the bus after transmitting. This must be done when
+ *	    the transmit shift register is empty, not be done when the
+ *	    transmit holding register is empty.  This functionality
+ *	    allows an RS485 driver to be written in user space.
+ */
+static int mxser_get_lsr_info(struct mxser_port *info,
+		unsigned int __user *value)
+{
+	unsigned char status;
+	unsigned int result;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->slock, flags);
+	status = inb(info->ioaddr + UART_LSR);
+	spin_unlock_irqrestore(&info->slock, flags);
+	result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
+	return put_user(result, value);
+}
+
+static int mxser_tiocmget(struct tty_struct *tty)
+{
+	struct mxser_port *info = tty->driver_data;
+	unsigned char control, status;
+	unsigned long flags;
+
+
+	if (tty->index == MXSER_PORTS)
+		return -ENOIOCTLCMD;
+	if (test_bit(TTY_IO_ERROR, &tty->flags))
+		return -EIO;
+
+	control = info->MCR;
+
+	spin_lock_irqsave(&info->slock, flags);
+	status = inb(info->ioaddr + UART_MSR);
+	if (status & UART_MSR_ANY_DELTA)
+		mxser_check_modem_status(tty, info, status);
+	spin_unlock_irqrestore(&info->slock, flags);
+	return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
+		    ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) |
+		    ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) |
+		    ((status & UART_MSR_RI) ? TIOCM_RNG : 0) |
+		    ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) |
+		    ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
+}
+
+static int mxser_tiocmset(struct tty_struct *tty,
+		unsigned int set, unsigned int clear)
+{
+	struct mxser_port *info = tty->driver_data;
+	unsigned long flags;
+
+
+	if (tty->index == MXSER_PORTS)
+		return -ENOIOCTLCMD;
+	if (test_bit(TTY_IO_ERROR, &tty->flags))
+		return -EIO;
+
+	spin_lock_irqsave(&info->slock, flags);
+
+	if (set & TIOCM_RTS)
+		info->MCR |= UART_MCR_RTS;
+	if (set & TIOCM_DTR)
+		info->MCR |= UART_MCR_DTR;
+
+	if (clear & TIOCM_RTS)
+		info->MCR &= ~UART_MCR_RTS;
+	if (clear & TIOCM_DTR)
+		info->MCR &= ~UART_MCR_DTR;
+
+	outb(info->MCR, info->ioaddr + UART_MCR);
+	spin_unlock_irqrestore(&info->slock, flags);
+	return 0;
+}
+
+static int __init mxser_program_mode(int port)
+{
+	int id, i, j, n;
+
+	outb(0, port);
+	outb(0, port);
+	outb(0, port);
+	(void)inb(port);
+	(void)inb(port);
+	outb(0, port);
+	(void)inb(port);
+
+	id = inb(port + 1) & 0x1F;
+	if ((id != C168_ASIC_ID) &&
+			(id != C104_ASIC_ID) &&
+			(id != C102_ASIC_ID) &&
+			(id != CI132_ASIC_ID) &&
+			(id != CI134_ASIC_ID) &&
+			(id != CI104J_ASIC_ID))
+		return -1;
+	for (i = 0, j = 0; i < 4; i++) {
+		n = inb(port + 2);
+		if (n == 'M') {
+			j = 1;
+		} else if ((j == 1) && (n == 1)) {
+			j = 2;
+			break;
+		} else
+			j = 0;
+	}
+	if (j != 2)
+		id = -2;
+	return id;
+}
+
+static void __init mxser_normal_mode(int port)
+{
+	int i, n;
+
+	outb(0xA5, port + 1);
+	outb(0x80, port + 3);
+	outb(12, port + 0);	/* 9600 bps */
+	outb(0, port + 1);
+	outb(0x03, port + 3);	/* 8 data bits */
+	outb(0x13, port + 4);	/* loop back mode */
+	for (i = 0; i < 16; i++) {
+		n = inb(port + 5);
+		if ((n & 0x61) == 0x60)
+			break;
+		if ((n & 1) == 1)
+			(void)inb(port);
+	}
+	outb(0x00, port + 4);
+}
+
+#define CHIP_SK 	0x01	/* Serial Data Clock  in Eprom */
+#define CHIP_DO 	0x02	/* Serial Data Output in Eprom */
+#define CHIP_CS 	0x04	/* Serial Chip Select in Eprom */
+#define CHIP_DI 	0x08	/* Serial Data Input  in Eprom */
+#define EN_CCMD 	0x000	/* Chip's command register     */
+#define EN0_RSARLO	0x008	/* Remote start address reg 0  */
+#define EN0_RSARHI	0x009	/* Remote start address reg 1  */
+#define EN0_RCNTLO	0x00A	/* Remote byte count reg WR    */
+#define EN0_RCNTHI	0x00B	/* Remote byte count reg WR    */
+#define EN0_DCFG	0x00E	/* Data configuration reg WR   */
+#define EN0_PORT	0x010	/* Rcv missed frame error counter RD */
+#define ENC_PAGE0	0x000	/* Select page 0 of chip registers   */
+#define ENC_PAGE3	0x0C0	/* Select page 3 of chip registers   */
+static int __init mxser_read_register(int port, unsigned short *regs)
+{
+	int i, k, value, id;
+	unsigned int j;
+
+	id = mxser_program_mode(port);
+	if (id < 0)
+		return id;
+	for (i = 0; i < 14; i++) {
+		k = (i & 0x3F) | 0x180;
+		for (j = 0x100; j > 0; j >>= 1) {
+			outb(CHIP_CS, port);
+			if (k & j) {
+				outb(CHIP_CS | CHIP_DO, port);
+				outb(CHIP_CS | CHIP_DO | CHIP_SK, port);	/* A? bit of read */
+			} else {
+				outb(CHIP_CS, port);
+				outb(CHIP_CS | CHIP_SK, port);	/* A? bit of read */
+			}
+		}
+		(void)inb(port);
+		value = 0;
+		for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) {
+			outb(CHIP_CS, port);
+			outb(CHIP_CS | CHIP_SK, port);
+			if (inb(port) & CHIP_DI)
+				value |= j;
+		}
+		regs[i] = value;
+		outb(0, port);
+	}
+	mxser_normal_mode(port);
+	return id;
+}
+
+static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
+{
+	struct mxser_port *ip;
+	struct tty_port *port;
+	struct tty_struct *tty;
+	int result, status;
+	unsigned int i, j;
+	int ret = 0;
+
+	switch (cmd) {
+	case MOXA_GET_MAJOR:
+		if (printk_ratelimit())
+			printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
+					"%x (GET_MAJOR), fix your userspace\n",
+					current->comm, cmd);
+		return put_user(ttymajor, (int __user *)argp);
+
+	case MOXA_CHKPORTENABLE:
+		result = 0;
+		for (i = 0; i < MXSER_BOARDS; i++)
+			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++)
+				if (mxser_boards[i].ports[j].ioaddr)
+					result |= (1 << i);
+		return put_user(result, (unsigned long __user *)argp);
+	case MOXA_GETDATACOUNT:
+		/* The receive side is locked by port->slock but it isn't
+		   clear that an exact snapshot is worth copying here */
+		if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
+			ret = -EFAULT;
+		return ret;
+	case MOXA_GETMSTATUS: {
+		struct mxser_mstatus ms, __user *msu = argp;
+		for (i = 0; i < MXSER_BOARDS; i++)
+			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
+				ip = &mxser_boards[i].ports[j];
+				port = &ip->port;
+				memset(&ms, 0, sizeof(ms));
+
+				mutex_lock(&port->mutex);
+				if (!ip->ioaddr)
+					goto copy;
+				
+				tty = tty_port_tty_get(port);
+
+				if (!tty || !tty->termios)
+					ms.cflag = ip->normal_termios.c_cflag;
+				else
+					ms.cflag = tty->termios->c_cflag;
+				tty_kref_put(tty);
+				spin_lock_irq(&ip->slock);
+				status = inb(ip->ioaddr + UART_MSR);
+				spin_unlock_irq(&ip->slock);
+				if (status & UART_MSR_DCD)
+					ms.dcd = 1;
+				if (status & UART_MSR_DSR)
+					ms.dsr = 1;
+				if (status & UART_MSR_CTS)
+					ms.cts = 1;
+			copy:
+				mutex_unlock(&port->mutex);
+				if (copy_to_user(msu, &ms, sizeof(ms)))
+					return -EFAULT;
+				msu++;
+			}
+		return 0;
+	}
+	case MOXA_ASPP_MON_EXT: {
+		struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */
+		unsigned int cflag, iflag, p;
+		u8 opmode;
+
+		me = kzalloc(sizeof(*me), GFP_KERNEL);
+		if (!me)
+			return -ENOMEM;
+
+		for (i = 0, p = 0; i < MXSER_BOARDS; i++) {
+			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) {
+				if (p >= ARRAY_SIZE(me->rx_cnt)) {
+					i = MXSER_BOARDS;
+					break;
+				}
+				ip = &mxser_boards[i].ports[j];
+				port = &ip->port;
+
+				mutex_lock(&port->mutex);
+				if (!ip->ioaddr) {
+					mutex_unlock(&port->mutex);
+					continue;
+				}
+
+				spin_lock_irq(&ip->slock);
+				status = mxser_get_msr(ip->ioaddr, 0, p);
+
+				if (status & UART_MSR_TERI)
+					ip->icount.rng++;
+				if (status & UART_MSR_DDSR)
+					ip->icount.dsr++;
+				if (status & UART_MSR_DDCD)
+					ip->icount.dcd++;
+				if (status & UART_MSR_DCTS)
+					ip->icount.cts++;
+
+				ip->mon_data.modem_status = status;
+				me->rx_cnt[p] = ip->mon_data.rxcnt;
+				me->tx_cnt[p] = ip->mon_data.txcnt;
+				me->up_rxcnt[p] = ip->mon_data.up_rxcnt;
+				me->up_txcnt[p] = ip->mon_data.up_txcnt;
+				me->modem_status[p] =
+					ip->mon_data.modem_status;
+				spin_unlock_irq(&ip->slock);
+
+				tty = tty_port_tty_get(&ip->port);
+
+				if (!tty || !tty->termios) {
+					cflag = ip->normal_termios.c_cflag;
+					iflag = ip->normal_termios.c_iflag;
+					me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios);
+				} else {
+					cflag = tty->termios->c_cflag;
+					iflag = tty->termios->c_iflag;
+					me->baudrate[p] = tty_get_baud_rate(tty);
+				}
+				tty_kref_put(tty);
+
+				me->databits[p] = cflag & CSIZE;
+				me->stopbits[p] = cflag & CSTOPB;
+				me->parity[p] = cflag & (PARENB | PARODD |
+						CMSPAR);
+
+				if (cflag & CRTSCTS)
+					me->flowctrl[p] |= 0x03;
+
+				if (iflag & (IXON | IXOFF))
+					me->flowctrl[p] |= 0x0C;
+
+				if (ip->type == PORT_16550A)
+					me->fifo[p] = 1;
+
+				opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
+				opmode &= OP_MODE_MASK;
+				me->iftype[p] = opmode;
+				mutex_unlock(&port->mutex);
+			}
+		}
+		if (copy_to_user(argp, me, sizeof(*me)))
+			ret = -EFAULT;
+		kfree(me);
+		return ret;
+	}
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg,
+		struct async_icount *cprev)
+{
+	struct async_icount cnow;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&info->slock, flags);
+	cnow = info->icount;	/* atomic copy */
+	spin_unlock_irqrestore(&info->slock, flags);
+
+	ret =	((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
+		((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
+		((arg & TIOCM_CD)  && (cnow.dcd != cprev->dcd)) ||
+		((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
+
+	*cprev = cnow;
+
+	return ret;
+}
+
+static int mxser_ioctl(struct tty_struct *tty,
+		unsigned int cmd, unsigned long arg)
+{
+	struct mxser_port *info = tty->driver_data;
+	struct tty_port *port = &info->port;
+	struct async_icount cnow;
+	unsigned long flags;
+	void __user *argp = (void __user *)arg;
+	int retval;
+
+	if (tty->index == MXSER_PORTS)
+		return mxser_ioctl_special(cmd, argp);
+
+	if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) {
+		int p;
+		unsigned long opmode;
+		static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f };
+		int shiftbit;
+		unsigned char val, mask;
+
+		p = tty->index % 4;
+		if (cmd == MOXA_SET_OP_MODE) {
+			if (get_user(opmode, (int __user *) argp))
+				return -EFAULT;
+			if (opmode != RS232_MODE &&
+					opmode != RS485_2WIRE_MODE &&
+					opmode != RS422_MODE &&
+					opmode != RS485_4WIRE_MODE)
+				return -EFAULT;
+			mask = ModeMask[p];
+			shiftbit = p * 2;
+			spin_lock_irq(&info->slock);
+			val = inb(info->opmode_ioaddr);
+			val &= mask;
+			val |= (opmode << shiftbit);
+			outb(val, info->opmode_ioaddr);
+			spin_unlock_irq(&info->slock);
+		} else {
+			shiftbit = p * 2;
+			spin_lock_irq(&info->slock);
+			opmode = inb(info->opmode_ioaddr) >> shiftbit;
+			spin_unlock_irq(&info->slock);
+			opmode &= OP_MODE_MASK;
+			if (put_user(opmode, (int __user *)argp))
+				return -EFAULT;
+		}
+		return 0;
+	}
+
+	if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT &&
+			test_bit(TTY_IO_ERROR, &tty->flags))
+		return -EIO;
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		mutex_lock(&port->mutex);
+		retval = mxser_get_serial_info(tty, argp);
+		mutex_unlock(&port->mutex);
+		return retval;
+	case TIOCSSERIAL:
+		mutex_lock(&port->mutex);
+		retval = mxser_set_serial_info(tty, argp);
+		mutex_unlock(&port->mutex);
+		return retval;
+	case TIOCSERGETLSR:	/* Get line status register */
+		return  mxser_get_lsr_info(info, argp);
+		/*
+		 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+		 * - mask passed in arg for lines of interest
+		 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+		 * Caller should use TIOCGICOUNT to see which one it was
+		 */
+	case TIOCMIWAIT:
+		spin_lock_irqsave(&info->slock, flags);
+		cnow = info->icount;	/* note the counters on entry */
+		spin_unlock_irqrestore(&info->slock, flags);
+
+		return wait_event_interruptible(info->port.delta_msr_wait,
+				mxser_cflags_changed(info, arg, &cnow));
+	case MOXA_HighSpeedOn:
+		return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
+	case MOXA_SDS_RSTICOUNTER:
+		spin_lock_irq(&info->slock);
+		info->mon_data.rxcnt = 0;
+		info->mon_data.txcnt = 0;
+		spin_unlock_irq(&info->slock);
+		return 0;
+
+	case MOXA_ASPP_OQUEUE:{
+		int len, lsr;
+
+		len = mxser_chars_in_buffer(tty);
+		spin_lock_irq(&info->slock);
+		lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE;
+		spin_unlock_irq(&info->slock);
+		len += (lsr ? 0 : 1);
+
+		return put_user(len, (int __user *)argp);
+	}
+	case MOXA_ASPP_MON: {
+		int mcr, status;
+
+		spin_lock_irq(&info->slock);
+		status = mxser_get_msr(info->ioaddr, 1, tty->index);
+		mxser_check_modem_status(tty, info, status);
+
+		mcr = inb(info->ioaddr + UART_MCR);
+		spin_unlock_irq(&info->slock);
+
+		if (mcr & MOXA_MUST_MCR_XON_FLAG)
+			info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
+		else
+			info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD;
+
+		if (mcr & MOXA_MUST_MCR_TX_XON)
+			info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT;
+		else
+			info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
+
+		if (tty->hw_stopped)
+			info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
+		else
+			info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
+
+		if (copy_to_user(argp, &info->mon_data,
+				sizeof(struct mxser_mon)))
+			return -EFAULT;
+
+		return 0;
+	}
+	case MOXA_ASPP_LSTATUS: {
+		if (put_user(info->err_shadow, (unsigned char __user *)argp))
+			return -EFAULT;
+
+		info->err_shadow = 0;
+		return 0;
+	}
+	case MOXA_SET_BAUD_METHOD: {
+		int method;
+
+		if (get_user(method, (int __user *)argp))
+			return -EFAULT;
+		mxser_set_baud_method[tty->index] = method;
+		return put_user(method, (int __user *)argp);
+	}
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+	/*
+	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+	 * Return: write counters to the user passed counter struct
+	 * NB: both 1->0 and 0->1 transitions are counted except for
+	 *     RI where only 0->1 is counted.
+	 */
+
+static int mxser_get_icount(struct tty_struct *tty,
+		struct serial_icounter_struct *icount)
+
+{
+	struct mxser_port *info = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->slock, flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->slock, flags);
+
+	icount->frame = cnow.frame;
+	icount->brk = cnow.brk;
+	icount->overrun = cnow.overrun;
+	icount->buf_overrun = cnow.buf_overrun;
+	icount->parity = cnow.parity;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	return 0;
+}
+
+static void mxser_stoprx(struct tty_struct *tty)
+{
+	struct mxser_port *info = tty->driver_data;
+
+	info->ldisc_stop_rx = 1;
+	if (I_IXOFF(tty)) {
+		if (info->board->chip_flag) {
+			info->IER &= ~MOXA_MUST_RECV_ISR;
+			outb(info->IER, info->ioaddr + UART_IER);
+		} else {
+			info->x_char = STOP_CHAR(tty);
+			outb(0, info->ioaddr + UART_IER);
+			info->IER |= UART_IER_THRI;
+			outb(info->IER, info->ioaddr + UART_IER);
+		}
+	}
+
+	if (tty->termios->c_cflag & CRTSCTS) {
+		info->MCR &= ~UART_MCR_RTS;
+		outb(info->MCR, info->ioaddr + UART_MCR);
+	}
+}
+
+/*
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ */
+static void mxser_throttle(struct tty_struct *tty)
+{
+	mxser_stoprx(tty);
+}
+
+static void mxser_unthrottle(struct tty_struct *tty)
+{
+	struct mxser_port *info = tty->driver_data;
+
+	/* startrx */
+	info->ldisc_stop_rx = 0;
+	if (I_IXOFF(tty)) {
+		if (info->x_char)
+			info->x_char = 0;
+		else {
+			if (info->board->chip_flag) {
+				info->IER |= MOXA_MUST_RECV_ISR;
+				outb(info->IER, info->ioaddr + UART_IER);
+			} else {
+				info->x_char = START_CHAR(tty);
+				outb(0, info->ioaddr + UART_IER);
+				info->IER |= UART_IER_THRI;
+				outb(info->IER, info->ioaddr + UART_IER);
+			}
+		}
+	}
+
+	if (tty->termios->c_cflag & CRTSCTS) {
+		info->MCR |= UART_MCR_RTS;
+		outb(info->MCR, info->ioaddr + UART_MCR);
+	}
+}
+
+/*
+ * mxser_stop() and mxser_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ */
+static void mxser_stop(struct tty_struct *tty)
+{
+	struct mxser_port *info = tty->driver_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->slock, flags);
+	if (info->IER & UART_IER_THRI) {
+		info->IER &= ~UART_IER_THRI;
+		outb(info->IER, info->ioaddr + UART_IER);
+	}
+	spin_unlock_irqrestore(&info->slock, flags);
+}
+
+static void mxser_start(struct tty_struct *tty)
+{
+	struct mxser_port *info = tty->driver_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->slock, flags);
+	if (info->xmit_cnt && info->port.xmit_buf) {
+		outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
+		info->IER |= UART_IER_THRI;
+		outb(info->IER, info->ioaddr + UART_IER);
+	}
+	spin_unlock_irqrestore(&info->slock, flags);
+}
+
+static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+	struct mxser_port *info = tty->driver_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->slock, flags);
+	mxser_change_speed(tty, old_termios);
+	spin_unlock_irqrestore(&info->slock, flags);
+
+	if ((old_termios->c_cflag & CRTSCTS) &&
+			!(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		mxser_start(tty);
+	}
+
+	/* Handle sw stopped */
+	if ((old_termios->c_iflag & IXON) &&
+			!(tty->termios->c_iflag & IXON)) {
+		tty->stopped = 0;
+
+		if (info->board->chip_flag) {
+			spin_lock_irqsave(&info->slock, flags);
+			mxser_disable_must_rx_software_flow_control(
+					info->ioaddr);
+			spin_unlock_irqrestore(&info->slock, flags);
+		}
+
+		mxser_start(tty);
+	}
+}
+
+/*
+ * mxser_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct mxser_port *info = tty->driver_data;
+	unsigned long orig_jiffies, char_time;
+	unsigned long flags;
+	int lsr;
+
+	if (info->type == PORT_UNKNOWN)
+		return;
+
+	if (info->xmit_fifo_size == 0)
+		return;		/* Just in case.... */
+
+	orig_jiffies = jiffies;
+	/*
+	 * Set the check interval to be 1/5 of the estimated time to
+	 * send a single character, and make it at least 1.  The check
+	 * interval should also be less than the timeout.
+	 *
+	 * Note: we have to use pretty tight timings here to satisfy
+	 * the NIST-PCTS.
+	 */
+	char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
+	char_time = char_time / 5;
+	if (char_time == 0)
+		char_time = 1;
+	if (timeout && timeout < char_time)
+		char_time = timeout;
+	/*
+	 * If the transmitter hasn't cleared in twice the approximate
+	 * amount of time to send the entire FIFO, it probably won't
+	 * ever clear.  This assumes the UART isn't doing flow
+	 * control, which is currently the case.  Hence, if it ever
+	 * takes longer than info->timeout, this is probably due to a
+	 * UART bug of some kind.  So, we clamp the timeout parameter at
+	 * 2*info->timeout.
+	 */
+	if (!timeout || timeout > 2 * info->timeout)
+		timeout = 2 * info->timeout;
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+	printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...",
+		timeout, char_time);
+	printk("jiff=%lu...", jiffies);
+#endif
+	spin_lock_irqsave(&info->slock, flags);
+	while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) {
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+		printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
+#endif
+		spin_unlock_irqrestore(&info->slock, flags);
+		schedule_timeout_interruptible(char_time);
+		spin_lock_irqsave(&info->slock, flags);
+		if (signal_pending(current))
+			break;
+		if (timeout && time_after(jiffies, orig_jiffies + timeout))
+			break;
+	}
+	spin_unlock_irqrestore(&info->slock, flags);
+	set_current_state(TASK_RUNNING);
+
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+	printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
+#endif
+}
+
+/*
+ * This routine is called by tty_hangup() when a hangup is signaled.
+ */
+static void mxser_hangup(struct tty_struct *tty)
+{
+	struct mxser_port *info = tty->driver_data;
+
+	mxser_flush_buffer(tty);
+	tty_port_hangup(&info->port);
+}
+
+/*
+ * mxser_rs_break() --- routine which turns the break handling on or off
+ */
+static int mxser_rs_break(struct tty_struct *tty, int break_state)
+{
+	struct mxser_port *info = tty->driver_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->slock, flags);
+	if (break_state == -1)
+		outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
+			info->ioaddr + UART_LCR);
+	else
+		outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
+			info->ioaddr + UART_LCR);
+	spin_unlock_irqrestore(&info->slock, flags);
+	return 0;
+}
+
+static void mxser_receive_chars(struct tty_struct *tty,
+				struct mxser_port *port, int *status)
+{
+	unsigned char ch, gdl;
+	int ignored = 0;
+	int cnt = 0;
+	int recv_room;
+	int max = 256;
+
+	recv_room = tty->receive_room;
+	if (recv_room == 0 && !port->ldisc_stop_rx)
+		mxser_stoprx(tty);
+	if (port->board->chip_flag != MOXA_OTHER_UART) {
+
+		if (*status & UART_LSR_SPECIAL)
+			goto intr_old;
+		if (port->board->chip_flag == MOXA_MUST_MU860_HWID &&
+				(*status & MOXA_MUST_LSR_RERR))
+			goto intr_old;
+		if (*status & MOXA_MUST_LSR_RERR)
+			goto intr_old;
+
+		gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER);
+
+		if (port->board->chip_flag == MOXA_MUST_MU150_HWID)
+			gdl &= MOXA_MUST_GDL_MASK;
+		if (gdl >= recv_room) {
+			if (!port->ldisc_stop_rx)
+				mxser_stoprx(tty);
+		}
+		while (gdl--) {
+			ch = inb(port->ioaddr + UART_RX);
+			tty_insert_flip_char(tty, ch, 0);
+			cnt++;
+		}
+		goto end_intr;
+	}
+intr_old:
+
+	do {
+		if (max-- < 0)
+			break;
+
+		ch = inb(port->ioaddr + UART_RX);
+		if (port->board->chip_flag && (*status & UART_LSR_OE))
+			outb(0x23, port->ioaddr + UART_FCR);
+		*status &= port->read_status_mask;
+		if (*status & port->ignore_status_mask) {
+			if (++ignored > 100)
+				break;
+		} else {
+			char flag = 0;
+			if (*status & UART_LSR_SPECIAL) {
+				if (*status & UART_LSR_BI) {
+					flag = TTY_BREAK;
+					port->icount.brk++;
+
+					if (port->port.flags & ASYNC_SAK)
+						do_SAK(tty);
+				} else if (*status & UART_LSR_PE) {
+					flag = TTY_PARITY;
+					port->icount.parity++;
+				} else if (*status & UART_LSR_FE) {
+					flag = TTY_FRAME;
+					port->icount.frame++;
+				} else if (*status & UART_LSR_OE) {
+					flag = TTY_OVERRUN;
+					port->icount.overrun++;
+				} else
+					flag = TTY_BREAK;
+			}
+			tty_insert_flip_char(tty, ch, flag);
+			cnt++;
+			if (cnt >= recv_room) {
+				if (!port->ldisc_stop_rx)
+					mxser_stoprx(tty);
+				break;
+			}
+
+		}
+
+		if (port->board->chip_flag)
+			break;
+
+		*status = inb(port->ioaddr + UART_LSR);
+	} while (*status & UART_LSR_DR);
+
+end_intr:
+	mxvar_log.rxcnt[tty->index] += cnt;
+	port->mon_data.rxcnt += cnt;
+	port->mon_data.up_rxcnt += cnt;
+
+	/*
+	 * We are called from an interrupt context with &port->slock
+	 * being held. Drop it temporarily in order to prevent
+	 * recursive locking.
+	 */
+	spin_unlock(&port->slock);
+	tty_flip_buffer_push(tty);
+	spin_lock(&port->slock);
+}
+
+static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port)
+{
+	int count, cnt;
+
+	if (port->x_char) {
+		outb(port->x_char, port->ioaddr + UART_TX);
+		port->x_char = 0;
+		mxvar_log.txcnt[tty->index]++;
+		port->mon_data.txcnt++;
+		port->mon_data.up_txcnt++;
+		port->icount.tx++;
+		return;
+	}
+
+	if (port->port.xmit_buf == NULL)
+		return;
+
+	if (port->xmit_cnt <= 0 || tty->stopped ||
+			(tty->hw_stopped &&
+			(port->type != PORT_16550A) &&
+			(!port->board->chip_flag))) {
+		port->IER &= ~UART_IER_THRI;
+		outb(port->IER, port->ioaddr + UART_IER);
+		return;
+	}
+
+	cnt = port->xmit_cnt;
+	count = port->xmit_fifo_size;
+	do {
+		outb(port->port.xmit_buf[port->xmit_tail++],
+			port->ioaddr + UART_TX);
+		port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1);
+		if (--port->xmit_cnt <= 0)
+			break;
+	} while (--count > 0);
+	mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt);
+
+	port->mon_data.txcnt += (cnt - port->xmit_cnt);
+	port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
+	port->icount.tx += (cnt - port->xmit_cnt);
+
+	if (port->xmit_cnt < WAKEUP_CHARS)
+		tty_wakeup(tty);
+
+	if (port->xmit_cnt <= 0) {
+		port->IER &= ~UART_IER_THRI;
+		outb(port->IER, port->ioaddr + UART_IER);
+	}
+}
+
+/*
+ * This is the serial driver's generic interrupt routine
+ */
+static irqreturn_t mxser_interrupt(int irq, void *dev_id)
+{
+	int status, iir, i;
+	struct mxser_board *brd = NULL;
+	struct mxser_port *port;
+	int max, irqbits, bits, msr;
+	unsigned int int_cnt, pass_counter = 0;
+	int handled = IRQ_NONE;
+	struct tty_struct *tty;
+
+	for (i = 0; i < MXSER_BOARDS; i++)
+		if (dev_id == &mxser_boards[i]) {
+			brd = dev_id;
+			break;
+		}
+
+	if (i == MXSER_BOARDS)
+		goto irq_stop;
+	if (brd == NULL)
+		goto irq_stop;
+	max = brd->info->nports;
+	while (pass_counter++ < MXSER_ISR_PASS_LIMIT) {
+		irqbits = inb(brd->vector) & brd->vector_mask;
+		if (irqbits == brd->vector_mask)
+			break;
+
+		handled = IRQ_HANDLED;
+		for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
+			if (irqbits == brd->vector_mask)
+				break;
+			if (bits & irqbits)
+				continue;
+			port = &brd->ports[i];
+
+			int_cnt = 0;
+			spin_lock(&port->slock);
+			do {
+				iir = inb(port->ioaddr + UART_IIR);
+				if (iir & UART_IIR_NO_INT)
+					break;
+				iir &= MOXA_MUST_IIR_MASK;
+				tty = tty_port_tty_get(&port->port);
+				if (!tty ||
+						(port->port.flags & ASYNC_CLOSING) ||
+						!(port->port.flags &
+							ASYNC_INITIALIZED)) {
+					status = inb(port->ioaddr + UART_LSR);
+					outb(0x27, port->ioaddr + UART_FCR);
+					inb(port->ioaddr + UART_MSR);
+					tty_kref_put(tty);
+					break;
+				}
+
+				status = inb(port->ioaddr + UART_LSR);
+
+				if (status & UART_LSR_PE)
+					port->err_shadow |= NPPI_NOTIFY_PARITY;
+				if (status & UART_LSR_FE)
+					port->err_shadow |= NPPI_NOTIFY_FRAMING;
+				if (status & UART_LSR_OE)
+					port->err_shadow |=
+						NPPI_NOTIFY_HW_OVERRUN;
+				if (status & UART_LSR_BI)
+					port->err_shadow |= NPPI_NOTIFY_BREAK;
+
+				if (port->board->chip_flag) {
+					if (iir == MOXA_MUST_IIR_GDA ||
+					    iir == MOXA_MUST_IIR_RDA ||
+					    iir == MOXA_MUST_IIR_RTO ||
+					    iir == MOXA_MUST_IIR_LSR)
+						mxser_receive_chars(tty, port,
+								&status);
+
+				} else {
+					status &= port->read_status_mask;
+					if (status & UART_LSR_DR)
+						mxser_receive_chars(tty, port,
+								&status);
+				}
+				msr = inb(port->ioaddr + UART_MSR);
+				if (msr & UART_MSR_ANY_DELTA)
+					mxser_check_modem_status(tty, port, msr);
+
+				if (port->board->chip_flag) {
+					if (iir == 0x02 && (status &
+								UART_LSR_THRE))
+						mxser_transmit_chars(tty, port);
+				} else {
+					if (status & UART_LSR_THRE)
+						mxser_transmit_chars(tty, port);
+				}
+				tty_kref_put(tty);
+			} while (int_cnt++ < MXSER_ISR_PASS_LIMIT);
+			spin_unlock(&port->slock);
+		}
+	}
+
+irq_stop:
+	return handled;
+}
+
+static const struct tty_operations mxser_ops = {
+	.open = mxser_open,
+	.close = mxser_close,
+	.write = mxser_write,
+	.put_char = mxser_put_char,
+	.flush_chars = mxser_flush_chars,
+	.write_room = mxser_write_room,
+	.chars_in_buffer = mxser_chars_in_buffer,
+	.flush_buffer = mxser_flush_buffer,
+	.ioctl = mxser_ioctl,
+	.throttle = mxser_throttle,
+	.unthrottle = mxser_unthrottle,
+	.set_termios = mxser_set_termios,
+	.stop = mxser_stop,
+	.start = mxser_start,
+	.hangup = mxser_hangup,
+	.break_ctl = mxser_rs_break,
+	.wait_until_sent = mxser_wait_until_sent,
+	.tiocmget = mxser_tiocmget,
+	.tiocmset = mxser_tiocmset,
+	.get_icount = mxser_get_icount,
+};
+
+struct tty_port_operations mxser_port_ops = {
+	.carrier_raised = mxser_carrier_raised,
+	.dtr_rts = mxser_dtr_rts,
+	.activate = mxser_activate,
+	.shutdown = mxser_shutdown_port,
+};
+
+/*
+ * The MOXA Smartio/Industio serial driver boot-time initialization code!
+ */
+
+static void mxser_release_ISA_res(struct mxser_board *brd)
+{
+	free_irq(brd->irq, brd);
+	release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
+	release_region(brd->vector, 1);
+}
+
+static int __devinit mxser_initbrd(struct mxser_board *brd,
+		struct pci_dev *pdev)
+{
+	struct mxser_port *info;
+	unsigned int i;
+	int retval;
+
+	printk(KERN_INFO "mxser: max. baud rate = %d bps\n",
+			brd->ports[0].max_baud);
+
+	for (i = 0; i < brd->info->nports; i++) {
+		info = &brd->ports[i];
+		tty_port_init(&info->port);
+		info->port.ops = &mxser_port_ops;
+		info->board = brd;
+		info->stop_rx = 0;
+		info->ldisc_stop_rx = 0;
+
+		/* Enhance mode enabled here */
+		if (brd->chip_flag != MOXA_OTHER_UART)
+			mxser_enable_must_enchance_mode(info->ioaddr);
+
+		info->port.flags = ASYNC_SHARE_IRQ;
+		info->type = brd->uart_type;
+
+		process_txrx_fifo(info);
+
+		info->custom_divisor = info->baud_base * 16;
+		info->port.close_delay = 5 * HZ / 10;
+		info->port.closing_wait = 30 * HZ;
+		info->normal_termios = mxvar_sdriver->init_termios;
+		memset(&info->mon_data, 0, sizeof(struct mxser_mon));
+		info->err_shadow = 0;
+		spin_lock_init(&info->slock);
+
+		/* before set INT ISR, disable all int */
+		outb(inb(info->ioaddr + UART_IER) & 0xf0,
+			info->ioaddr + UART_IER);
+	}
+
+	retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
+			brd);
+	if (retval)
+		printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
+			"conflict with another device.\n",
+			brd->info->name, brd->irq);
+
+	return retval;
+}
+
+static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
+{
+	int id, i, bits;
+	unsigned short regs[16], irq;
+	unsigned char scratch, scratch2;
+
+	brd->chip_flag = MOXA_OTHER_UART;
+
+	id = mxser_read_register(cap, regs);
+	switch (id) {
+	case C168_ASIC_ID:
+		brd->info = &mxser_cards[0];
+		break;
+	case C104_ASIC_ID:
+		brd->info = &mxser_cards[1];
+		break;
+	case CI104J_ASIC_ID:
+		brd->info = &mxser_cards[2];
+		break;
+	case C102_ASIC_ID:
+		brd->info = &mxser_cards[5];
+		break;
+	case CI132_ASIC_ID:
+		brd->info = &mxser_cards[6];
+		break;
+	case CI134_ASIC_ID:
+		brd->info = &mxser_cards[7];
+		break;
+	default:
+		return 0;
+	}
+
+	irq = 0;
+	/* some ISA cards have 2 ports, but we want to see them as 4-port (why?)
+	   Flag-hack checks if configuration should be read as 2-port here. */
+	if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) {
+		irq = regs[9] & 0xF000;
+		irq = irq | (irq >> 4);
+		if (irq != (regs[9] & 0xFF00))
+			goto err_irqconflict;
+	} else if (brd->info->nports == 4) {
+		irq = regs[9] & 0xF000;
+		irq = irq | (irq >> 4);
+		irq = irq | (irq >> 8);
+		if (irq != regs[9])
+			goto err_irqconflict;
+	} else if (brd->info->nports == 8) {
+		irq = regs[9] & 0xF000;
+		irq = irq | (irq >> 4);
+		irq = irq | (irq >> 8);
+		if ((irq != regs[9]) || (irq != regs[10]))
+			goto err_irqconflict;
+	}
+
+	if (!irq) {
+		printk(KERN_ERR "mxser: interrupt number unset\n");
+		return -EIO;
+	}
+	brd->irq = ((int)(irq & 0xF000) >> 12);
+	for (i = 0; i < 8; i++)
+		brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
+	if ((regs[12] & 0x80) == 0) {
+		printk(KERN_ERR "mxser: invalid interrupt vector\n");
+		return -EIO;
+	}
+	brd->vector = (int)regs[11];	/* interrupt vector */
+	if (id == 1)
+		brd->vector_mask = 0x00FF;
+	else
+		brd->vector_mask = 0x000F;
+	for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
+		if (regs[12] & bits) {
+			brd->ports[i].baud_base = 921600;
+			brd->ports[i].max_baud = 921600;
+		} else {
+			brd->ports[i].baud_base = 115200;
+			brd->ports[i].max_baud = 115200;
+		}
+	}
+	scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);
+	outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR);
+	outb(0, cap + UART_EFR);	/* EFR is the same as FCR */
+	outb(scratch2, cap + UART_LCR);
+	outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR);
+	scratch = inb(cap + UART_IIR);
+
+	if (scratch & 0xC0)
+		brd->uart_type = PORT_16550A;
+	else
+		brd->uart_type = PORT_16450;
+	if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
+			"mxser(IO)")) {
+		printk(KERN_ERR "mxser: can't request ports I/O region: "
+				"0x%.8lx-0x%.8lx\n",
+				brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+				8 * brd->info->nports - 1);
+		return -EIO;
+	}
+	if (!request_region(brd->vector, 1, "mxser(vector)")) {
+		release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
+		printk(KERN_ERR "mxser: can't request interrupt vector region: "
+				"0x%.8lx-0x%.8lx\n",
+				brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+				8 * brd->info->nports - 1);
+		return -EIO;
+	}
+	return brd->info->nports;
+
+err_irqconflict:
+	printk(KERN_ERR "mxser: invalid interrupt number\n");
+	return -EIO;
+}
+
+static int __devinit mxser_probe(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+#ifdef CONFIG_PCI
+	struct mxser_board *brd;
+	unsigned int i, j;
+	unsigned long ioaddress;
+	int retval = -EINVAL;
+
+	for (i = 0; i < MXSER_BOARDS; i++)
+		if (mxser_boards[i].info == NULL)
+			break;
+
+	if (i >= MXSER_BOARDS) {
+		dev_err(&pdev->dev, "too many boards found (maximum %d), board "
+				"not configured\n", MXSER_BOARDS);
+		goto err;
+	}
+
+	brd = &mxser_boards[i];
+	brd->idx = i * MXSER_PORTS_PER_BOARD;
+	dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
+		mxser_cards[ent->driver_data].name,
+		pdev->bus->number, PCI_SLOT(pdev->devfn));
+
+	retval = pci_enable_device(pdev);
+	if (retval) {
+		dev_err(&pdev->dev, "PCI enable failed\n");
+		goto err;
+	}
+
+	/* io address */
+	ioaddress = pci_resource_start(pdev, 2);
+	retval = pci_request_region(pdev, 2, "mxser(IO)");
+	if (retval)
+		goto err_dis;
+
+	brd->info = &mxser_cards[ent->driver_data];
+	for (i = 0; i < brd->info->nports; i++)
+		brd->ports[i].ioaddr = ioaddress + 8 * i;
+
+	/* vector */
+	ioaddress = pci_resource_start(pdev, 3);
+	retval = pci_request_region(pdev, 3, "mxser(vector)");
+	if (retval)
+		goto err_zero;
+	brd->vector = ioaddress;
+
+	/* irq */
+	brd->irq = pdev->irq;
+
+	brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr);
+	brd->uart_type = PORT_16550A;
+	brd->vector_mask = 0;
+
+	for (i = 0; i < brd->info->nports; i++) {
+		for (j = 0; j < UART_INFO_NUM; j++) {
+			if (Gpci_uart_info[j].type == brd->chip_flag) {
+				brd->ports[i].max_baud =
+					Gpci_uart_info[j].max_baud;
+
+				/* exception....CP-102 */
+				if (brd->info->flags & MXSER_HIGHBAUD)
+					brd->ports[i].max_baud = 921600;
+				break;
+			}
+		}
+	}
+
+	if (brd->chip_flag == MOXA_MUST_MU860_HWID) {
+		for (i = 0; i < brd->info->nports; i++) {
+			if (i < 4)
+				brd->ports[i].opmode_ioaddr = ioaddress + 4;
+			else
+				brd->ports[i].opmode_ioaddr = ioaddress + 0x0c;
+		}
+		outb(0, ioaddress + 4);	/* default set to RS232 mode */
+		outb(0, ioaddress + 0x0c);	/* default set to RS232 mode */
+	}
+
+	for (i = 0; i < brd->info->nports; i++) {
+		brd->vector_mask |= (1 << i);
+		brd->ports[i].baud_base = 921600;
+	}
+
+	/* mxser_initbrd will hook ISR. */
+	retval = mxser_initbrd(brd, pdev);
+	if (retval)
+		goto err_rel3;
+
+	for (i = 0; i < brd->info->nports; i++)
+		tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
+
+	pci_set_drvdata(pdev, brd);
+
+	return 0;
+err_rel3:
+	pci_release_region(pdev, 3);
+err_zero:
+	brd->info = NULL;
+	pci_release_region(pdev, 2);
+err_dis:
+	pci_disable_device(pdev);
+err:
+	return retval;
+#else
+	return -ENODEV;
+#endif
+}
+
+static void __devexit mxser_remove(struct pci_dev *pdev)
+{
+#ifdef CONFIG_PCI
+	struct mxser_board *brd = pci_get_drvdata(pdev);
+	unsigned int i;
+
+	for (i = 0; i < brd->info->nports; i++)
+		tty_unregister_device(mxvar_sdriver, brd->idx + i);
+
+	free_irq(pdev->irq, brd);
+	pci_release_region(pdev, 2);
+	pci_release_region(pdev, 3);
+	pci_disable_device(pdev);
+	brd->info = NULL;
+#endif
+}
+
+static struct pci_driver mxser_driver = {
+	.name = "mxser",
+	.id_table = mxser_pcibrds,
+	.probe = mxser_probe,
+	.remove = __devexit_p(mxser_remove)
+};
+
+static int __init mxser_module_init(void)
+{
+	struct mxser_board *brd;
+	unsigned int b, i, m;
+	int retval;
+
+	mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
+	if (!mxvar_sdriver)
+		return -ENOMEM;
+
+	printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n",
+		MXSER_VERSION);
+
+	/* Initialize the tty_driver structure */
+	mxvar_sdriver->owner = THIS_MODULE;
+	mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
+	mxvar_sdriver->name = "ttyMI";
+	mxvar_sdriver->major = ttymajor;
+	mxvar_sdriver->minor_start = 0;
+	mxvar_sdriver->num = MXSER_PORTS + 1;
+	mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL;
+	mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
+	mxvar_sdriver->init_termios = tty_std_termios;
+	mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
+	mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV;
+	tty_set_operations(mxvar_sdriver, &mxser_ops);
+
+	retval = tty_register_driver(mxvar_sdriver);
+	if (retval) {
+		printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family "
+				"tty driver !\n");
+		goto err_put;
+	}
+
+	/* Start finding ISA boards here */
+	for (m = 0, b = 0; b < MXSER_BOARDS; b++) {
+		if (!ioaddr[b])
+			continue;
+
+		brd = &mxser_boards[m];
+		retval = mxser_get_ISA_conf(ioaddr[b], brd);
+		if (retval <= 0) {
+			brd->info = NULL;
+			continue;
+		}
+
+		printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n",
+				brd->info->name, ioaddr[b]);
+
+		/* mxser_initbrd will hook ISR. */
+		if (mxser_initbrd(brd, NULL) < 0) {
+			brd->info = NULL;
+			continue;
+		}
+
+		brd->idx = m * MXSER_PORTS_PER_BOARD;
+		for (i = 0; i < brd->info->nports; i++)
+			tty_register_device(mxvar_sdriver, brd->idx + i, NULL);
+
+		m++;
+	}
+
+	retval = pci_register_driver(&mxser_driver);
+	if (retval) {
+		printk(KERN_ERR "mxser: can't register pci driver\n");
+		if (!m) {
+			retval = -ENODEV;
+			goto err_unr;
+		} /* else: we have some ISA cards under control */
+	}
+
+	return 0;
+err_unr:
+	tty_unregister_driver(mxvar_sdriver);
+err_put:
+	put_tty_driver(mxvar_sdriver);
+	return retval;
+}
+
+static void __exit mxser_module_exit(void)
+{
+	unsigned int i, j;
+
+	pci_unregister_driver(&mxser_driver);
+
+	for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
+		if (mxser_boards[i].info != NULL)
+			for (j = 0; j < mxser_boards[i].info->nports; j++)
+				tty_unregister_device(mxvar_sdriver,
+						mxser_boards[i].idx + j);
+	tty_unregister_driver(mxvar_sdriver);
+	put_tty_driver(mxvar_sdriver);
+
+	for (i = 0; i < MXSER_BOARDS; i++)
+		if (mxser_boards[i].info != NULL)
+			mxser_release_ISA_res(&mxser_boards[i]);
+}
+
+module_init(mxser_module_init);
+module_exit(mxser_module_exit);
diff --git a/drivers/tty/mxser.h b/drivers/tty/mxser.h
new file mode 100644
index 000000000000..41878a69203d
--- /dev/null
+++ b/drivers/tty/mxser.h
@@ -0,0 +1,150 @@
+#ifndef _MXSER_H
+#define _MXSER_H
+
+/*
+ *	Semi-public control interfaces
+ */
+
+/*
+ *	MOXA ioctls
+ */
+
+#define MOXA			0x400
+#define MOXA_GETDATACOUNT	(MOXA + 23)
+#define MOXA_DIAGNOSE		(MOXA + 50)
+#define MOXA_CHKPORTENABLE	(MOXA + 60)
+#define MOXA_HighSpeedOn	(MOXA + 61)
+#define MOXA_GET_MAJOR		(MOXA + 63)
+#define MOXA_GETMSTATUS		(MOXA + 65)
+#define MOXA_SET_OP_MODE	(MOXA + 66)
+#define MOXA_GET_OP_MODE	(MOXA + 67)
+
+#define RS232_MODE		0
+#define RS485_2WIRE_MODE	1
+#define RS422_MODE		2
+#define RS485_4WIRE_MODE	3
+#define OP_MODE_MASK		3
+
+#define MOXA_SDS_RSTICOUNTER	(MOXA + 69)
+#define MOXA_ASPP_OQUEUE  	(MOXA + 70)
+#define MOXA_ASPP_MON     	(MOXA + 73)
+#define MOXA_ASPP_LSTATUS 	(MOXA + 74)
+#define MOXA_ASPP_MON_EXT 	(MOXA + 75)
+#define MOXA_SET_BAUD_METHOD	(MOXA + 76)
+
+/* --------------------------------------------------- */
+
+#define NPPI_NOTIFY_PARITY	0x01
+#define NPPI_NOTIFY_FRAMING	0x02
+#define NPPI_NOTIFY_HW_OVERRUN	0x04
+#define NPPI_NOTIFY_SW_OVERRUN	0x08
+#define NPPI_NOTIFY_BREAK	0x10
+
+#define NPPI_NOTIFY_CTSHOLD         0x01	/* Tx hold by CTS low */
+#define NPPI_NOTIFY_DSRHOLD         0x02	/* Tx hold by DSR low */
+#define NPPI_NOTIFY_XOFFHOLD        0x08	/* Tx hold by Xoff received */
+#define NPPI_NOTIFY_XOFFXENT        0x10	/* Xoff Sent */
+
+/* follow just for Moxa Must chip define. */
+/* */
+/* when LCR register (offset 0x03) write following value, */
+/* the Must chip will enter enchance mode. And write value */
+/* on EFR (offset 0x02) bit 6,7 to change bank. */
+#define MOXA_MUST_ENTER_ENCHANCE	0xBF
+
+/* when enhance mode enable, access on general bank register */
+#define MOXA_MUST_GDL_REGISTER		0x07
+#define MOXA_MUST_GDL_MASK		0x7F
+#define MOXA_MUST_GDL_HAS_BAD_DATA	0x80
+
+#define MOXA_MUST_LSR_RERR		0x80	/* error in receive FIFO */
+/* enchance register bank select and enchance mode setting register */
+/* when LCR register equal to 0xBF */
+#define MOXA_MUST_EFR_REGISTER		0x02
+/* enchance mode enable */
+#define MOXA_MUST_EFR_EFRB_ENABLE	0x10
+/* enchance reister bank set 0, 1, 2 */
+#define MOXA_MUST_EFR_BANK0		0x00
+#define MOXA_MUST_EFR_BANK1		0x40
+#define MOXA_MUST_EFR_BANK2		0x80
+#define MOXA_MUST_EFR_BANK3		0xC0
+#define MOXA_MUST_EFR_BANK_MASK		0xC0
+
+/* set XON1 value register, when LCR=0xBF and change to bank0 */
+#define MOXA_MUST_XON1_REGISTER		0x04
+
+/* set XON2 value register, when LCR=0xBF and change to bank0 */
+#define MOXA_MUST_XON2_REGISTER		0x05
+
+/* set XOFF1 value register, when LCR=0xBF and change to bank0 */
+#define MOXA_MUST_XOFF1_REGISTER	0x06
+
+/* set XOFF2 value register, when LCR=0xBF and change to bank0 */
+#define MOXA_MUST_XOFF2_REGISTER	0x07
+
+#define MOXA_MUST_RBRTL_REGISTER	0x04
+#define MOXA_MUST_RBRTH_REGISTER	0x05
+#define MOXA_MUST_RBRTI_REGISTER	0x06
+#define MOXA_MUST_THRTL_REGISTER	0x07
+#define MOXA_MUST_ENUM_REGISTER		0x04
+#define MOXA_MUST_HWID_REGISTER		0x05
+#define MOXA_MUST_ECR_REGISTER		0x06
+#define MOXA_MUST_CSR_REGISTER		0x07
+
+/* good data mode enable */
+#define MOXA_MUST_FCR_GDA_MODE_ENABLE	0x20
+/* only good data put into RxFIFO */
+#define MOXA_MUST_FCR_GDA_ONLY_ENABLE	0x10
+
+/* enable CTS interrupt */
+#define MOXA_MUST_IER_ECTSI		0x80
+/* enable RTS interrupt */
+#define MOXA_MUST_IER_ERTSI		0x40
+/* enable Xon/Xoff interrupt */
+#define MOXA_MUST_IER_XINT		0x20
+/* enable GDA interrupt */
+#define MOXA_MUST_IER_EGDAI		0x10
+
+#define MOXA_MUST_RECV_ISR		(UART_IER_RDI | MOXA_MUST_IER_EGDAI)
+
+/* GDA interrupt pending */
+#define MOXA_MUST_IIR_GDA		0x1C
+#define MOXA_MUST_IIR_RDA		0x04
+#define MOXA_MUST_IIR_RTO		0x0C
+#define MOXA_MUST_IIR_LSR		0x06
+
+/* recieved Xon/Xoff or specical interrupt pending */
+#define MOXA_MUST_IIR_XSC		0x10
+
+/* RTS/CTS change state interrupt pending */
+#define MOXA_MUST_IIR_RTSCTS		0x20
+#define MOXA_MUST_IIR_MASK		0x3E
+
+#define MOXA_MUST_MCR_XON_FLAG		0x40
+#define MOXA_MUST_MCR_XON_ANY		0x80
+#define MOXA_MUST_MCR_TX_XON		0x08
+
+/* software flow control on chip mask value */
+#define MOXA_MUST_EFR_SF_MASK		0x0F
+/* send Xon1/Xoff1 */
+#define MOXA_MUST_EFR_SF_TX1		0x08
+/* send Xon2/Xoff2 */
+#define MOXA_MUST_EFR_SF_TX2		0x04
+/* send Xon1,Xon2/Xoff1,Xoff2 */
+#define MOXA_MUST_EFR_SF_TX12		0x0C
+/* don't send Xon/Xoff */
+#define MOXA_MUST_EFR_SF_TX_NO		0x00
+/* Tx software flow control mask */
+#define MOXA_MUST_EFR_SF_TX_MASK	0x0C
+/* don't receive Xon/Xoff */
+#define MOXA_MUST_EFR_SF_RX_NO		0x00
+/* receive Xon1/Xoff1 */
+#define MOXA_MUST_EFR_SF_RX1		0x02
+/* receive Xon2/Xoff2 */
+#define MOXA_MUST_EFR_SF_RX2		0x01
+/* receive Xon1,Xon2/Xoff1,Xoff2 */
+#define MOXA_MUST_EFR_SF_RX12		0x03
+/* Rx software flow control mask */
+#define MOXA_MUST_EFR_SF_RX_MASK	0x03
+
+#endif
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index aa2e5d3eb01a..176f63256b37 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1250,8 +1250,7 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
 
 static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
 {
-	struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1,
-							gsm->ftype|PF);
+	struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype);
 	if (msg == NULL)
 		return;
 	msg->data[0] = (ctrl->cmd << 1) | 2 | EA;	/* command */
@@ -2649,13 +2648,13 @@ static void gsmtty_wait_until_sent(struct tty_struct *tty, int timeout)
 	   to do here */
 }
 
-static int gsmtty_tiocmget(struct tty_struct *tty, struct file *filp)
+static int gsmtty_tiocmget(struct tty_struct *tty)
 {
 	struct gsm_dlci *dlci = tty->driver_data;
 	return dlci->modem_rx;
 }
 
-static int gsmtty_tiocmset(struct tty_struct *tty, struct file *filp,
+static int gsmtty_tiocmset(struct tty_struct *tty,
 	unsigned int set, unsigned int clear)
 {
 	struct gsm_dlci *dlci = tty->driver_data;
@@ -2672,7 +2671,7 @@ static int gsmtty_tiocmset(struct tty_struct *tty, struct file *filp,
 }
 
 
-static int gsmtty_ioctl(struct tty_struct *tty, struct file *filp,
+static int gsmtty_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
 	return -ENOIOCTLCMD;
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 52fc0c9a6364..cea56033b34c 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -97,7 +97,6 @@
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/errno.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>	/* used in new tty drivers */
 #include <linux/signal.h>	/* used in new tty drivers */
 #include <linux/if.h>
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index 88dda0c45ee0..5c6c31459a2f 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -57,7 +57,6 @@
 #include <linux/ioport.h>
 #include <linux/in.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/errno.h>
 #include <linux/string.h>	/* used in new tty drivers */
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
new file mode 100644
index 000000000000..f4f11164efe5
--- /dev/null
+++ b/drivers/tty/nozomi.c
@@ -0,0 +1,1991 @@
+/*
+ * nozomi.c  -- HSDPA driver Broadband Wireless Data Card - Globe Trotter
+ *
+ * Written by: Ulf Jakobsson,
+ *             Jan Åkerfeldt,
+ *             Stefan Thomasson,
+ *
+ * Maintained by: Paul Hardwick (p.hardwick@option.com)
+ *
+ * Patches:
+ *          Locking code changes for Vodafone by Sphere Systems Ltd,
+ *                              Andrew Bird (ajb@spheresystems.co.uk )
+ *                              & Phil Sanderson
+ *
+ * Source has been ported from an implementation made by Filip Aben @ Option
+ *
+ * --------------------------------------------------------------------------
+ *
+ * Copyright (c) 2005,2006 Option Wireless Sweden AB
+ * Copyright (c) 2006 Sphere Systems Ltd
+ * Copyright (c) 2006 Option Wireless n/v
+ * All rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * --------------------------------------------------------------------------
+ */
+
+/* Enable this to have a lot of debug printouts */
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/sched.h>
+#include <linux/serial.h>
+#include <linux/interrupt.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/kfifo.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <asm/byteorder.h>
+
+#include <linux/delay.h>
+
+
+#define VERSION_STRING DRIVER_DESC " 2.1d (build date: " \
+					__DATE__ " " __TIME__ ")"
+
+/*    Macros definitions */
+
+/* Default debug printout level */
+#define NOZOMI_DEBUG_LEVEL 0x00
+
+#define P_BUF_SIZE 128
+#define NFO(_err_flag_, args...)				\
+do {								\
+	char tmp[P_BUF_SIZE];					\
+	snprintf(tmp, sizeof(tmp), ##args);			\
+	printk(_err_flag_ "[%d] %s(): %s\n", __LINE__,		\
+		__func__, tmp);				\
+} while (0)
+
+#define DBG1(args...) D_(0x01, ##args)
+#define DBG2(args...) D_(0x02, ##args)
+#define DBG3(args...) D_(0x04, ##args)
+#define DBG4(args...) D_(0x08, ##args)
+#define DBG5(args...) D_(0x10, ##args)
+#define DBG6(args...) D_(0x20, ##args)
+#define DBG7(args...) D_(0x40, ##args)
+#define DBG8(args...) D_(0x80, ##args)
+
+#ifdef DEBUG
+/* Do we need this settable at runtime? */
+static int debug = NOZOMI_DEBUG_LEVEL;
+
+#define D(lvl, args...)  do \
+			{if (lvl & debug) NFO(KERN_DEBUG, ##args); } \
+			while (0)
+#define D_(lvl, args...) D(lvl, ##args)
+
+/* These printouts are always printed */
+
+#else
+static int debug;
+#define D_(lvl, args...)
+#endif
+
+/* TODO: rewrite to optimize macros... */
+
+#define TMP_BUF_MAX 256
+
+#define DUMP(buf__,len__) \
+  do {  \
+    char tbuf[TMP_BUF_MAX] = {0};\
+    if (len__ > 1) {\
+	snprintf(tbuf, len__ > TMP_BUF_MAX ? TMP_BUF_MAX : len__, "%s", buf__);\
+	if (tbuf[len__-2] == '\r') {\
+		tbuf[len__-2] = 'r';\
+	} \
+	DBG1("SENDING: '%s' (%d+n)", tbuf, len__);\
+    } else {\
+	DBG1("SENDING: '%s' (%d)", tbuf, len__);\
+    } \
+} while (0)
+
+/*    Defines */
+#define NOZOMI_NAME		"nozomi"
+#define NOZOMI_NAME_TTY		"nozomi_tty"
+#define DRIVER_DESC		"Nozomi driver"
+
+#define NTTY_TTY_MAXMINORS	256
+#define NTTY_FIFO_BUFFER_SIZE	8192
+
+/* Must be power of 2 */
+#define FIFO_BUFFER_SIZE_UL	8192
+
+/* Size of tmp send buffer to card */
+#define SEND_BUF_MAX		1024
+#define RECEIVE_BUF_MAX		4
+
+
+#define R_IIR		0x0000	/* Interrupt Identity Register */
+#define R_FCR		0x0000	/* Flow Control Register */
+#define R_IER		0x0004	/* Interrupt Enable Register */
+
+#define CONFIG_MAGIC	0xEFEFFEFE
+#define TOGGLE_VALID	0x0000
+
+/* Definition of interrupt tokens */
+#define MDM_DL1		0x0001
+#define MDM_UL1		0x0002
+#define MDM_DL2		0x0004
+#define MDM_UL2		0x0008
+#define DIAG_DL1	0x0010
+#define DIAG_DL2	0x0020
+#define DIAG_UL		0x0040
+#define APP1_DL		0x0080
+#define APP1_UL		0x0100
+#define APP2_DL		0x0200
+#define APP2_UL		0x0400
+#define CTRL_DL		0x0800
+#define CTRL_UL		0x1000
+#define RESET		0x8000
+
+#define MDM_DL		(MDM_DL1  | MDM_DL2)
+#define MDM_UL		(MDM_UL1  | MDM_UL2)
+#define DIAG_DL		(DIAG_DL1 | DIAG_DL2)
+
+/* modem signal definition */
+#define CTRL_DSR	0x0001
+#define CTRL_DCD	0x0002
+#define CTRL_RI		0x0004
+#define CTRL_CTS	0x0008
+
+#define CTRL_DTR	0x0001
+#define CTRL_RTS	0x0002
+
+#define MAX_PORT		4
+#define NOZOMI_MAX_PORTS	5
+#define NOZOMI_MAX_CARDS	(NTTY_TTY_MAXMINORS / MAX_PORT)
+
+/*    Type definitions */
+
+/*
+ * There are two types of nozomi cards,
+ * one with 2048 memory and with 8192 memory
+ */
+enum card_type {
+	F32_2 = 2048,	/* 512 bytes downlink + uplink * 2 -> 2048 */
+	F32_8 = 8192,	/* 3072 bytes downl. + 1024 bytes uplink * 2 -> 8192 */
+};
+
+/* Initialization states a card can be in */
+enum card_state {
+	NOZOMI_STATE_UKNOWN	= 0,
+	NOZOMI_STATE_ENABLED	= 1,	/* pci device enabled */
+	NOZOMI_STATE_ALLOCATED	= 2,	/* config setup done */
+	NOZOMI_STATE_READY	= 3,	/* flowcontrols received */
+};
+
+/* Two different toggle channels exist */
+enum channel_type {
+	CH_A = 0,
+	CH_B = 1,
+};
+
+/* Port definition for the card regarding flow control */
+enum ctrl_port_type {
+	CTRL_CMD	= 0,
+	CTRL_MDM	= 1,
+	CTRL_DIAG	= 2,
+	CTRL_APP1	= 3,
+	CTRL_APP2	= 4,
+	CTRL_ERROR	= -1,
+};
+
+/* Ports that the nozomi has */
+enum port_type {
+	PORT_MDM	= 0,
+	PORT_DIAG	= 1,
+	PORT_APP1	= 2,
+	PORT_APP2	= 3,
+	PORT_CTRL	= 4,
+	PORT_ERROR	= -1,
+};
+
+#ifdef __BIG_ENDIAN
+/* Big endian */
+
+struct toggles {
+	unsigned int enabled:5;	/*
+				 * Toggle fields are valid if enabled is 0,
+				 * else A-channels must always be used.
+				 */
+	unsigned int diag_dl:1;
+	unsigned int mdm_dl:1;
+	unsigned int mdm_ul:1;
+} __attribute__ ((packed));
+
+/* Configuration table to read at startup of card */
+/* Is for now only needed during initialization phase */
+struct config_table {
+	u32 signature;
+	u16 product_information;
+	u16 version;
+	u8 pad3[3];
+	struct toggles toggle;
+	u8 pad1[4];
+	u16 dl_mdm_len1;	/*
+				 * If this is 64, it can hold
+				 * 60 bytes + 4 that is length field
+				 */
+	u16 dl_start;
+
+	u16 dl_diag_len1;
+	u16 dl_mdm_len2;	/*
+				 * If this is 64, it can hold
+				 * 60 bytes + 4 that is length field
+				 */
+	u16 dl_app1_len;
+
+	u16 dl_diag_len2;
+	u16 dl_ctrl_len;
+	u16 dl_app2_len;
+	u8 pad2[16];
+	u16 ul_mdm_len1;
+	u16 ul_start;
+	u16 ul_diag_len;
+	u16 ul_mdm_len2;
+	u16 ul_app1_len;
+	u16 ul_app2_len;
+	u16 ul_ctrl_len;
+} __attribute__ ((packed));
+
+/* This stores all control downlink flags */
+struct ctrl_dl {
+	u8 port;
+	unsigned int reserved:4;
+	unsigned int CTS:1;
+	unsigned int RI:1;
+	unsigned int DCD:1;
+	unsigned int DSR:1;
+} __attribute__ ((packed));
+
+/* This stores all control uplink flags */
+struct ctrl_ul {
+	u8 port;
+	unsigned int reserved:6;
+	unsigned int RTS:1;
+	unsigned int DTR:1;
+} __attribute__ ((packed));
+
+#else
+/* Little endian */
+
+/* This represents the toggle information */
+struct toggles {
+	unsigned int mdm_ul:1;
+	unsigned int mdm_dl:1;
+	unsigned int diag_dl:1;
+	unsigned int enabled:5;	/*
+				 * Toggle fields are valid if enabled is 0,
+				 * else A-channels must always be used.
+				 */
+} __attribute__ ((packed));
+
+/* Configuration table to read at startup of card */
+struct config_table {
+	u32 signature;
+	u16 version;
+	u16 product_information;
+	struct toggles toggle;
+	u8 pad1[7];
+	u16 dl_start;
+	u16 dl_mdm_len1;	/*
+				 * If this is 64, it can hold
+				 * 60 bytes + 4 that is length field
+				 */
+	u16 dl_mdm_len2;
+	u16 dl_diag_len1;
+	u16 dl_diag_len2;
+	u16 dl_app1_len;
+	u16 dl_app2_len;
+	u16 dl_ctrl_len;
+	u8 pad2[16];
+	u16 ul_start;
+	u16 ul_mdm_len2;
+	u16 ul_mdm_len1;
+	u16 ul_diag_len;
+	u16 ul_app1_len;
+	u16 ul_app2_len;
+	u16 ul_ctrl_len;
+} __attribute__ ((packed));
+
+/* This stores all control downlink flags */
+struct ctrl_dl {
+	unsigned int DSR:1;
+	unsigned int DCD:1;
+	unsigned int RI:1;
+	unsigned int CTS:1;
+	unsigned int reserverd:4;
+	u8 port;
+} __attribute__ ((packed));
+
+/* This stores all control uplink flags */
+struct ctrl_ul {
+	unsigned int DTR:1;
+	unsigned int RTS:1;
+	unsigned int reserved:6;
+	u8 port;
+} __attribute__ ((packed));
+#endif
+
+/* This holds all information that is needed regarding a port */
+struct port {
+	struct tty_port port;
+	u8 update_flow_control;
+	struct ctrl_ul ctrl_ul;
+	struct ctrl_dl ctrl_dl;
+	struct kfifo fifo_ul;
+	void __iomem *dl_addr[2];
+	u32 dl_size[2];
+	u8 toggle_dl;
+	void __iomem *ul_addr[2];
+	u32 ul_size[2];
+	u8 toggle_ul;
+	u16 token_dl;
+
+	/* mutex to ensure one access patch to this port */
+	struct mutex tty_sem;
+	wait_queue_head_t tty_wait;
+	struct async_icount tty_icount;
+
+	struct nozomi *dc;
+};
+
+/* Private data one for each card in the system */
+struct nozomi {
+	void __iomem *base_addr;
+	unsigned long flip;
+
+	/* Pointers to registers */
+	void __iomem *reg_iir;
+	void __iomem *reg_fcr;
+	void __iomem *reg_ier;
+
+	u16 last_ier;
+	enum card_type card_type;
+	struct config_table config_table;	/* Configuration table */
+	struct pci_dev *pdev;
+	struct port port[NOZOMI_MAX_PORTS];
+	u8 *send_buf;
+
+	spinlock_t spin_mutex;	/* secures access to registers and tty */
+
+	unsigned int index_start;
+	enum card_state state;
+	u32 open_ttys;
+};
+
+/* This is a data packet that is read or written to/from card */
+struct buffer {
+	u32 size;		/* size is the length of the data buffer */
+	u8 *data;
+} __attribute__ ((packed));
+
+/*    Global variables */
+static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = {
+	{PCI_DEVICE(0x1931, 0x000c)},	/* Nozomi HSDPA */
+	{},
+};
+
+MODULE_DEVICE_TABLE(pci, nozomi_pci_tbl);
+
+static struct nozomi *ndevs[NOZOMI_MAX_CARDS];
+static struct tty_driver *ntty_driver;
+
+static const struct tty_port_operations noz_tty_port_ops;
+
+/*
+ * find card by tty_index
+ */
+static inline struct nozomi *get_dc_by_tty(const struct tty_struct *tty)
+{
+	return tty ? ndevs[tty->index / MAX_PORT] : NULL;
+}
+
+static inline struct port *get_port_by_tty(const struct tty_struct *tty)
+{
+	struct nozomi *ndev = get_dc_by_tty(tty);
+	return ndev ? &ndev->port[tty->index % MAX_PORT] : NULL;
+}
+
+/*
+ * TODO:
+ * -Optimize
+ * -Rewrite cleaner
+ */
+
+static void read_mem32(u32 *buf, const void __iomem *mem_addr_start,
+			u32 size_bytes)
+{
+	u32 i = 0;
+	const u32 __iomem *ptr = mem_addr_start;
+	u16 *buf16;
+
+	if (unlikely(!ptr || !buf))
+		goto out;
+
+	/* shortcut for extremely often used cases */
+	switch (size_bytes) {
+	case 2:	/* 2 bytes */
+		buf16 = (u16 *) buf;
+		*buf16 = __le16_to_cpu(readw(ptr));
+		goto out;
+		break;
+	case 4:	/* 4 bytes */
+		*(buf) = __le32_to_cpu(readl(ptr));
+		goto out;
+		break;
+	}
+
+	while (i < size_bytes) {
+		if (size_bytes - i == 2) {
+			/* Handle 2 bytes in the end */
+			buf16 = (u16 *) buf;
+			*(buf16) = __le16_to_cpu(readw(ptr));
+			i += 2;
+		} else {
+			/* Read 4 bytes */
+			*(buf) = __le32_to_cpu(readl(ptr));
+			i += 4;
+		}
+		buf++;
+		ptr++;
+	}
+out:
+	return;
+}
+
+/*
+ * TODO:
+ * -Optimize
+ * -Rewrite cleaner
+ */
+static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf,
+			u32 size_bytes)
+{
+	u32 i = 0;
+	u32 __iomem *ptr = mem_addr_start;
+	const u16 *buf16;
+
+	if (unlikely(!ptr || !buf))
+		return 0;
+
+	/* shortcut for extremely often used cases */
+	switch (size_bytes) {
+	case 2:	/* 2 bytes */
+		buf16 = (const u16 *)buf;
+		writew(__cpu_to_le16(*buf16), ptr);
+		return 2;
+		break;
+	case 1: /*
+		 * also needs to write 4 bytes in this case
+		 * so falling through..
+		 */
+	case 4: /* 4 bytes */
+		writel(__cpu_to_le32(*buf), ptr);
+		return 4;
+		break;
+	}
+
+	while (i < size_bytes) {
+		if (size_bytes - i == 2) {
+			/* 2 bytes */
+			buf16 = (const u16 *)buf;
+			writew(__cpu_to_le16(*buf16), ptr);
+			i += 2;
+		} else {
+			/* 4 bytes */
+			writel(__cpu_to_le32(*buf), ptr);
+			i += 4;
+		}
+		buf++;
+		ptr++;
+	}
+	return i;
+}
+
+/* Setup pointers to different channels and also setup buffer sizes. */
+static void setup_memory(struct nozomi *dc)
+{
+	void __iomem *offset = dc->base_addr + dc->config_table.dl_start;
+	/* The length reported is including the length field of 4 bytes,
+	 * hence subtract with 4.
+	 */
+	const u16 buff_offset = 4;
+
+	/* Modem port dl configuration */
+	dc->port[PORT_MDM].dl_addr[CH_A] = offset;
+	dc->port[PORT_MDM].dl_addr[CH_B] =
+				(offset += dc->config_table.dl_mdm_len1);
+	dc->port[PORT_MDM].dl_size[CH_A] =
+				dc->config_table.dl_mdm_len1 - buff_offset;
+	dc->port[PORT_MDM].dl_size[CH_B] =
+				dc->config_table.dl_mdm_len2 - buff_offset;
+
+	/* Diag port dl configuration */
+	dc->port[PORT_DIAG].dl_addr[CH_A] =
+				(offset += dc->config_table.dl_mdm_len2);
+	dc->port[PORT_DIAG].dl_size[CH_A] =
+				dc->config_table.dl_diag_len1 - buff_offset;
+	dc->port[PORT_DIAG].dl_addr[CH_B] =
+				(offset += dc->config_table.dl_diag_len1);
+	dc->port[PORT_DIAG].dl_size[CH_B] =
+				dc->config_table.dl_diag_len2 - buff_offset;
+
+	/* App1 port dl configuration */
+	dc->port[PORT_APP1].dl_addr[CH_A] =
+				(offset += dc->config_table.dl_diag_len2);
+	dc->port[PORT_APP1].dl_size[CH_A] =
+				dc->config_table.dl_app1_len - buff_offset;
+
+	/* App2 port dl configuration */
+	dc->port[PORT_APP2].dl_addr[CH_A] =
+				(offset += dc->config_table.dl_app1_len);
+	dc->port[PORT_APP2].dl_size[CH_A] =
+				dc->config_table.dl_app2_len - buff_offset;
+
+	/* Ctrl dl configuration */
+	dc->port[PORT_CTRL].dl_addr[CH_A] =
+				(offset += dc->config_table.dl_app2_len);
+	dc->port[PORT_CTRL].dl_size[CH_A] =
+				dc->config_table.dl_ctrl_len - buff_offset;
+
+	offset = dc->base_addr + dc->config_table.ul_start;
+
+	/* Modem Port ul configuration */
+	dc->port[PORT_MDM].ul_addr[CH_A] = offset;
+	dc->port[PORT_MDM].ul_size[CH_A] =
+				dc->config_table.ul_mdm_len1 - buff_offset;
+	dc->port[PORT_MDM].ul_addr[CH_B] =
+				(offset += dc->config_table.ul_mdm_len1);
+	dc->port[PORT_MDM].ul_size[CH_B] =
+				dc->config_table.ul_mdm_len2 - buff_offset;
+
+	/* Diag port ul configuration */
+	dc->port[PORT_DIAG].ul_addr[CH_A] =
+				(offset += dc->config_table.ul_mdm_len2);
+	dc->port[PORT_DIAG].ul_size[CH_A] =
+				dc->config_table.ul_diag_len - buff_offset;
+
+	/* App1 port ul configuration */
+	dc->port[PORT_APP1].ul_addr[CH_A] =
+				(offset += dc->config_table.ul_diag_len);
+	dc->port[PORT_APP1].ul_size[CH_A] =
+				dc->config_table.ul_app1_len - buff_offset;
+
+	/* App2 port ul configuration */
+	dc->port[PORT_APP2].ul_addr[CH_A] =
+				(offset += dc->config_table.ul_app1_len);
+	dc->port[PORT_APP2].ul_size[CH_A] =
+				dc->config_table.ul_app2_len - buff_offset;
+
+	/* Ctrl ul configuration */
+	dc->port[PORT_CTRL].ul_addr[CH_A] =
+				(offset += dc->config_table.ul_app2_len);
+	dc->port[PORT_CTRL].ul_size[CH_A] =
+				dc->config_table.ul_ctrl_len - buff_offset;
+}
+
+/* Dump config table under initalization phase */
+#ifdef DEBUG
+static void dump_table(const struct nozomi *dc)
+{
+	DBG3("signature: 0x%08X", dc->config_table.signature);
+	DBG3("version: 0x%04X", dc->config_table.version);
+	DBG3("product_information: 0x%04X", \
+				dc->config_table.product_information);
+	DBG3("toggle enabled: %d", dc->config_table.toggle.enabled);
+	DBG3("toggle up_mdm: %d", dc->config_table.toggle.mdm_ul);
+	DBG3("toggle dl_mdm: %d", dc->config_table.toggle.mdm_dl);
+	DBG3("toggle dl_dbg: %d", dc->config_table.toggle.diag_dl);
+
+	DBG3("dl_start: 0x%04X", dc->config_table.dl_start);
+	DBG3("dl_mdm_len0: 0x%04X, %d", dc->config_table.dl_mdm_len1,
+	   dc->config_table.dl_mdm_len1);
+	DBG3("dl_mdm_len1: 0x%04X, %d", dc->config_table.dl_mdm_len2,
+	   dc->config_table.dl_mdm_len2);
+	DBG3("dl_diag_len0: 0x%04X, %d", dc->config_table.dl_diag_len1,
+	   dc->config_table.dl_diag_len1);
+	DBG3("dl_diag_len1: 0x%04X, %d", dc->config_table.dl_diag_len2,
+	   dc->config_table.dl_diag_len2);
+	DBG3("dl_app1_len: 0x%04X, %d", dc->config_table.dl_app1_len,
+	   dc->config_table.dl_app1_len);
+	DBG3("dl_app2_len: 0x%04X, %d", dc->config_table.dl_app2_len,
+	   dc->config_table.dl_app2_len);
+	DBG3("dl_ctrl_len: 0x%04X, %d", dc->config_table.dl_ctrl_len,
+	   dc->config_table.dl_ctrl_len);
+	DBG3("ul_start: 0x%04X, %d", dc->config_table.ul_start,
+	   dc->config_table.ul_start);
+	DBG3("ul_mdm_len[0]: 0x%04X, %d", dc->config_table.ul_mdm_len1,
+	   dc->config_table.ul_mdm_len1);
+	DBG3("ul_mdm_len[1]: 0x%04X, %d", dc->config_table.ul_mdm_len2,
+	   dc->config_table.ul_mdm_len2);
+	DBG3("ul_diag_len: 0x%04X, %d", dc->config_table.ul_diag_len,
+	   dc->config_table.ul_diag_len);
+	DBG3("ul_app1_len: 0x%04X, %d", dc->config_table.ul_app1_len,
+	   dc->config_table.ul_app1_len);
+	DBG3("ul_app2_len: 0x%04X, %d", dc->config_table.ul_app2_len,
+	   dc->config_table.ul_app2_len);
+	DBG3("ul_ctrl_len: 0x%04X, %d", dc->config_table.ul_ctrl_len,
+	   dc->config_table.ul_ctrl_len);
+}
+#else
+static inline void dump_table(const struct nozomi *dc) { }
+#endif
+
+/*
+ * Read configuration table from card under intalization phase
+ * Returns 1 if ok, else 0
+ */
+static int nozomi_read_config_table(struct nozomi *dc)
+{
+	read_mem32((u32 *) &dc->config_table, dc->base_addr + 0,
+						sizeof(struct config_table));
+
+	if (dc->config_table.signature != CONFIG_MAGIC) {
+		dev_err(&dc->pdev->dev, "ConfigTable Bad! 0x%08X != 0x%08X\n",
+			dc->config_table.signature, CONFIG_MAGIC);
+		return 0;
+	}
+
+	if ((dc->config_table.version == 0)
+	    || (dc->config_table.toggle.enabled == TOGGLE_VALID)) {
+		int i;
+		DBG1("Second phase, configuring card");
+
+		setup_memory(dc);
+
+		dc->port[PORT_MDM].toggle_ul = dc->config_table.toggle.mdm_ul;
+		dc->port[PORT_MDM].toggle_dl = dc->config_table.toggle.mdm_dl;
+		dc->port[PORT_DIAG].toggle_dl = dc->config_table.toggle.diag_dl;
+		DBG1("toggle ports: MDM UL:%d MDM DL:%d, DIAG DL:%d",
+		   dc->port[PORT_MDM].toggle_ul,
+		   dc->port[PORT_MDM].toggle_dl, dc->port[PORT_DIAG].toggle_dl);
+
+		dump_table(dc);
+
+		for (i = PORT_MDM; i < MAX_PORT; i++) {
+			memset(&dc->port[i].ctrl_dl, 0, sizeof(struct ctrl_dl));
+			memset(&dc->port[i].ctrl_ul, 0, sizeof(struct ctrl_ul));
+		}
+
+		/* Enable control channel */
+		dc->last_ier = dc->last_ier | CTRL_DL;
+		writew(dc->last_ier, dc->reg_ier);
+
+		dc->state = NOZOMI_STATE_ALLOCATED;
+		dev_info(&dc->pdev->dev, "Initialization OK!\n");
+		return 1;
+	}
+
+	if ((dc->config_table.version > 0)
+	    && (dc->config_table.toggle.enabled != TOGGLE_VALID)) {
+		u32 offset = 0;
+		DBG1("First phase: pushing upload buffers, clearing download");
+
+		dev_info(&dc->pdev->dev, "Version of card: %d\n",
+			 dc->config_table.version);
+
+		/* Here we should disable all I/O over F32. */
+		setup_memory(dc);
+
+		/*
+		 * We should send ALL channel pair tokens back along
+		 * with reset token
+		 */
+
+		/* push upload modem buffers */
+		write_mem32(dc->port[PORT_MDM].ul_addr[CH_A],
+			(u32 *) &offset, 4);
+		write_mem32(dc->port[PORT_MDM].ul_addr[CH_B],
+			(u32 *) &offset, 4);
+
+		writew(MDM_UL | DIAG_DL | MDM_DL, dc->reg_fcr);
+
+		DBG1("First phase done");
+	}
+
+	return 1;
+}
+
+/* Enable uplink interrupts  */
+static void enable_transmit_ul(enum port_type port, struct nozomi *dc)
+{
+	static const u16 mask[] = {MDM_UL, DIAG_UL, APP1_UL, APP2_UL, CTRL_UL};
+
+	if (port < NOZOMI_MAX_PORTS) {
+		dc->last_ier |= mask[port];
+		writew(dc->last_ier, dc->reg_ier);
+	} else {
+		dev_err(&dc->pdev->dev, "Called with wrong port?\n");
+	}
+}
+
+/* Disable uplink interrupts  */
+static void disable_transmit_ul(enum port_type port, struct nozomi *dc)
+{
+	static const u16 mask[] =
+		{~MDM_UL, ~DIAG_UL, ~APP1_UL, ~APP2_UL, ~CTRL_UL};
+
+	if (port < NOZOMI_MAX_PORTS) {
+		dc->last_ier &= mask[port];
+		writew(dc->last_ier, dc->reg_ier);
+	} else {
+		dev_err(&dc->pdev->dev, "Called with wrong port?\n");
+	}
+}
+
+/* Enable downlink interrupts */
+static void enable_transmit_dl(enum port_type port, struct nozomi *dc)
+{
+	static const u16 mask[] = {MDM_DL, DIAG_DL, APP1_DL, APP2_DL, CTRL_DL};
+
+	if (port < NOZOMI_MAX_PORTS) {
+		dc->last_ier |= mask[port];
+		writew(dc->last_ier, dc->reg_ier);
+	} else {
+		dev_err(&dc->pdev->dev, "Called with wrong port?\n");
+	}
+}
+
+/* Disable downlink interrupts */
+static void disable_transmit_dl(enum port_type port, struct nozomi *dc)
+{
+	static const u16 mask[] =
+		{~MDM_DL, ~DIAG_DL, ~APP1_DL, ~APP2_DL, ~CTRL_DL};
+
+	if (port < NOZOMI_MAX_PORTS) {
+		dc->last_ier &= mask[port];
+		writew(dc->last_ier, dc->reg_ier);
+	} else {
+		dev_err(&dc->pdev->dev, "Called with wrong port?\n");
+	}
+}
+
+/*
+ * Return 1 - send buffer to card and ack.
+ * Return 0 - don't ack, don't send buffer to card.
+ */
+static int send_data(enum port_type index, struct nozomi *dc)
+{
+	u32 size = 0;
+	struct port *port = &dc->port[index];
+	const u8 toggle = port->toggle_ul;
+	void __iomem *addr = port->ul_addr[toggle];
+	const u32 ul_size = port->ul_size[toggle];
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
+
+	/* Get data from tty and place in buf for now */
+	size = kfifo_out(&port->fifo_ul, dc->send_buf,
+			   ul_size < SEND_BUF_MAX ? ul_size : SEND_BUF_MAX);
+
+	if (size == 0) {
+		DBG4("No more data to send, disable link:");
+		tty_kref_put(tty);
+		return 0;
+	}
+
+	/* DUMP(buf, size); */
+
+	/* Write length + data */
+	write_mem32(addr, (u32 *) &size, 4);
+	write_mem32(addr + 4, (u32 *) dc->send_buf, size);
+
+	if (tty)
+		tty_wakeup(tty);
+
+	tty_kref_put(tty);
+	return 1;
+}
+
+/* If all data has been read, return 1, else 0 */
+static int receive_data(enum port_type index, struct nozomi *dc)
+{
+	u8 buf[RECEIVE_BUF_MAX] = { 0 };
+	int size;
+	u32 offset = 4;
+	struct port *port = &dc->port[index];
+	void __iomem *addr = port->dl_addr[port->toggle_dl];
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
+	int i, ret;
+
+	if (unlikely(!tty)) {
+		DBG1("tty not open for port: %d?", index);
+		return 1;
+	}
+
+	read_mem32((u32 *) &size, addr, 4);
+	/*  DBG1( "%d bytes port: %d", size, index); */
+
+	if (test_bit(TTY_THROTTLED, &tty->flags)) {
+		DBG1("No room in tty, don't read data, don't ack interrupt, "
+			"disable interrupt");
+
+		/* disable interrupt in downlink... */
+		disable_transmit_dl(index, dc);
+		ret = 0;
+		goto put;
+	}
+
+	if (unlikely(size == 0)) {
+		dev_err(&dc->pdev->dev, "size == 0?\n");
+		ret = 1;
+		goto put;
+	}
+
+	while (size > 0) {
+		read_mem32((u32 *) buf, addr + offset, RECEIVE_BUF_MAX);
+
+		if (size == 1) {
+			tty_insert_flip_char(tty, buf[0], TTY_NORMAL);
+			size = 0;
+		} else if (size < RECEIVE_BUF_MAX) {
+			size -= tty_insert_flip_string(tty, (char *) buf, size);
+		} else {
+			i = tty_insert_flip_string(tty, \
+						(char *) buf, RECEIVE_BUF_MAX);
+			size -= i;
+			offset += i;
+		}
+	}
+
+	set_bit(index, &dc->flip);
+	ret = 1;
+put:
+	tty_kref_put(tty);
+	return ret;
+}
+
+/* Debug for interrupts */
+#ifdef DEBUG
+static char *interrupt2str(u16 interrupt)
+{
+	static char buf[TMP_BUF_MAX];
+	char *p = buf;
+
+	interrupt & MDM_DL1 ? p += snprintf(p, TMP_BUF_MAX, "MDM_DL1 ") : NULL;
+	interrupt & MDM_DL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"MDM_DL2 ") : NULL;
+
+	interrupt & MDM_UL1 ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"MDM_UL1 ") : NULL;
+	interrupt & MDM_UL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"MDM_UL2 ") : NULL;
+
+	interrupt & DIAG_DL1 ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"DIAG_DL1 ") : NULL;
+	interrupt & DIAG_DL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"DIAG_DL2 ") : NULL;
+
+	interrupt & DIAG_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"DIAG_UL ") : NULL;
+
+	interrupt & APP1_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"APP1_DL ") : NULL;
+	interrupt & APP2_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"APP2_DL ") : NULL;
+
+	interrupt & APP1_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"APP1_UL ") : NULL;
+	interrupt & APP2_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"APP2_UL ") : NULL;
+
+	interrupt & CTRL_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"CTRL_DL ") : NULL;
+	interrupt & CTRL_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"CTRL_UL ") : NULL;
+
+	interrupt & RESET ? p += snprintf(p, TMP_BUF_MAX - (p - buf),
+					"RESET ") : NULL;
+
+	return buf;
+}
+#endif
+
+/*
+ * Receive flow control
+ * Return 1 - If ok, else 0
+ */
+static int receive_flow_control(struct nozomi *dc)
+{
+	enum port_type port = PORT_MDM;
+	struct ctrl_dl ctrl_dl;
+	struct ctrl_dl old_ctrl;
+	u16 enable_ier = 0;
+
+	read_mem32((u32 *) &ctrl_dl, dc->port[PORT_CTRL].dl_addr[CH_A], 2);
+
+	switch (ctrl_dl.port) {
+	case CTRL_CMD:
+		DBG1("The Base Band sends this value as a response to a "
+			"request for IMSI detach sent over the control "
+			"channel uplink (see section 7.6.1).");
+		break;
+	case CTRL_MDM:
+		port = PORT_MDM;
+		enable_ier = MDM_DL;
+		break;
+	case CTRL_DIAG:
+		port = PORT_DIAG;
+		enable_ier = DIAG_DL;
+		break;
+	case CTRL_APP1:
+		port = PORT_APP1;
+		enable_ier = APP1_DL;
+		break;
+	case CTRL_APP2:
+		port = PORT_APP2;
+		enable_ier = APP2_DL;
+		if (dc->state == NOZOMI_STATE_ALLOCATED) {
+			/*
+			 * After card initialization the flow control
+			 * received for APP2 is always the last
+			 */
+			dc->state = NOZOMI_STATE_READY;
+			dev_info(&dc->pdev->dev, "Device READY!\n");
+		}
+		break;
+	default:
+		dev_err(&dc->pdev->dev,
+			"ERROR: flow control received for non-existing port\n");
+		return 0;
+	};
+
+	DBG1("0x%04X->0x%04X", *((u16 *)&dc->port[port].ctrl_dl),
+	   *((u16 *)&ctrl_dl));
+
+	old_ctrl = dc->port[port].ctrl_dl;
+	dc->port[port].ctrl_dl = ctrl_dl;
+
+	if (old_ctrl.CTS == 1 && ctrl_dl.CTS == 0) {
+		DBG1("Disable interrupt (0x%04X) on port: %d",
+			enable_ier, port);
+		disable_transmit_ul(port, dc);
+
+	} else if (old_ctrl.CTS == 0 && ctrl_dl.CTS == 1) {
+
+		if (kfifo_len(&dc->port[port].fifo_ul)) {
+			DBG1("Enable interrupt (0x%04X) on port: %d",
+				enable_ier, port);
+			DBG1("Data in buffer [%d], enable transmit! ",
+				kfifo_len(&dc->port[port].fifo_ul));
+			enable_transmit_ul(port, dc);
+		} else {
+			DBG1("No data in buffer...");
+		}
+	}
+
+	if (*(u16 *)&old_ctrl == *(u16 *)&ctrl_dl) {
+		DBG1(" No change in mctrl");
+		return 1;
+	}
+	/* Update statistics */
+	if (old_ctrl.CTS != ctrl_dl.CTS)
+		dc->port[port].tty_icount.cts++;
+	if (old_ctrl.DSR != ctrl_dl.DSR)
+		dc->port[port].tty_icount.dsr++;
+	if (old_ctrl.RI != ctrl_dl.RI)
+		dc->port[port].tty_icount.rng++;
+	if (old_ctrl.DCD != ctrl_dl.DCD)
+		dc->port[port].tty_icount.dcd++;
+
+	wake_up_interruptible(&dc->port[port].tty_wait);
+
+	DBG1("port: %d DCD(%d), CTS(%d), RI(%d), DSR(%d)",
+	   port,
+	   dc->port[port].tty_icount.dcd, dc->port[port].tty_icount.cts,
+	   dc->port[port].tty_icount.rng, dc->port[port].tty_icount.dsr);
+
+	return 1;
+}
+
+static enum ctrl_port_type port2ctrl(enum port_type port,
+					const struct nozomi *dc)
+{
+	switch (port) {
+	case PORT_MDM:
+		return CTRL_MDM;
+	case PORT_DIAG:
+		return CTRL_DIAG;
+	case PORT_APP1:
+		return CTRL_APP1;
+	case PORT_APP2:
+		return CTRL_APP2;
+	default:
+		dev_err(&dc->pdev->dev,
+			"ERROR: send flow control " \
+			"received for non-existing port\n");
+	};
+	return CTRL_ERROR;
+}
+
+/*
+ * Send flow control, can only update one channel at a time
+ * Return 0 - If we have updated all flow control
+ * Return 1 - If we need to update more flow control, ack current enable more
+ */
+static int send_flow_control(struct nozomi *dc)
+{
+	u32 i, more_flow_control_to_be_updated = 0;
+	u16 *ctrl;
+
+	for (i = PORT_MDM; i < MAX_PORT; i++) {
+		if (dc->port[i].update_flow_control) {
+			if (more_flow_control_to_be_updated) {
+				/* We have more flow control to be updated */
+				return 1;
+			}
+			dc->port[i].ctrl_ul.port = port2ctrl(i, dc);
+			ctrl = (u16 *)&dc->port[i].ctrl_ul;
+			write_mem32(dc->port[PORT_CTRL].ul_addr[0], \
+				(u32 *) ctrl, 2);
+			dc->port[i].update_flow_control = 0;
+			more_flow_control_to_be_updated = 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * Handle downlink data, ports that are handled are modem and diagnostics
+ * Return 1 - ok
+ * Return 0 - toggle fields are out of sync
+ */
+static int handle_data_dl(struct nozomi *dc, enum port_type port, u8 *toggle,
+			u16 read_iir, u16 mask1, u16 mask2)
+{
+	if (*toggle == 0 && read_iir & mask1) {
+		if (receive_data(port, dc)) {
+			writew(mask1, dc->reg_fcr);
+			*toggle = !(*toggle);
+		}
+
+		if (read_iir & mask2) {
+			if (receive_data(port, dc)) {
+				writew(mask2, dc->reg_fcr);
+				*toggle = !(*toggle);
+			}
+		}
+	} else if (*toggle == 1 && read_iir & mask2) {
+		if (receive_data(port, dc)) {
+			writew(mask2, dc->reg_fcr);
+			*toggle = !(*toggle);
+		}
+
+		if (read_iir & mask1) {
+			if (receive_data(port, dc)) {
+				writew(mask1, dc->reg_fcr);
+				*toggle = !(*toggle);
+			}
+		}
+	} else {
+		dev_err(&dc->pdev->dev, "port out of sync!, toggle:%d\n",
+			*toggle);
+		return 0;
+	}
+	return 1;
+}
+
+/*
+ * Handle uplink data, this is currently for the modem port
+ * Return 1 - ok
+ * Return 0 - toggle field are out of sync
+ */
+static int handle_data_ul(struct nozomi *dc, enum port_type port, u16 read_iir)
+{
+	u8 *toggle = &(dc->port[port].toggle_ul);
+
+	if (*toggle == 0 && read_iir & MDM_UL1) {
+		dc->last_ier &= ~MDM_UL;
+		writew(dc->last_ier, dc->reg_ier);
+		if (send_data(port, dc)) {
+			writew(MDM_UL1, dc->reg_fcr);
+			dc->last_ier = dc->last_ier | MDM_UL;
+			writew(dc->last_ier, dc->reg_ier);
+			*toggle = !*toggle;
+		}
+
+		if (read_iir & MDM_UL2) {
+			dc->last_ier &= ~MDM_UL;
+			writew(dc->last_ier, dc->reg_ier);
+			if (send_data(port, dc)) {
+				writew(MDM_UL2, dc->reg_fcr);
+				dc->last_ier = dc->last_ier | MDM_UL;
+				writew(dc->last_ier, dc->reg_ier);
+				*toggle = !*toggle;
+			}
+		}
+
+	} else if (*toggle == 1 && read_iir & MDM_UL2) {
+		dc->last_ier &= ~MDM_UL;
+		writew(dc->last_ier, dc->reg_ier);
+		if (send_data(port, dc)) {
+			writew(MDM_UL2, dc->reg_fcr);
+			dc->last_ier = dc->last_ier | MDM_UL;
+			writew(dc->last_ier, dc->reg_ier);
+			*toggle = !*toggle;
+		}
+
+		if (read_iir & MDM_UL1) {
+			dc->last_ier &= ~MDM_UL;
+			writew(dc->last_ier, dc->reg_ier);
+			if (send_data(port, dc)) {
+				writew(MDM_UL1, dc->reg_fcr);
+				dc->last_ier = dc->last_ier | MDM_UL;
+				writew(dc->last_ier, dc->reg_ier);
+				*toggle = !*toggle;
+			}
+		}
+	} else {
+		writew(read_iir & MDM_UL, dc->reg_fcr);
+		dev_err(&dc->pdev->dev, "port out of sync!\n");
+		return 0;
+	}
+	return 1;
+}
+
+static irqreturn_t interrupt_handler(int irq, void *dev_id)
+{
+	struct nozomi *dc = dev_id;
+	unsigned int a;
+	u16 read_iir;
+
+	if (!dc)
+		return IRQ_NONE;
+
+	spin_lock(&dc->spin_mutex);
+	read_iir = readw(dc->reg_iir);
+
+	/* Card removed */
+	if (read_iir == (u16)-1)
+		goto none;
+	/*
+	 * Just handle interrupt enabled in IER
+	 * (by masking with dc->last_ier)
+	 */
+	read_iir &= dc->last_ier;
+
+	if (read_iir == 0)
+		goto none;
+
+
+	DBG4("%s irq:0x%04X, prev:0x%04X", interrupt2str(read_iir), read_iir,
+		dc->last_ier);
+
+	if (read_iir & RESET) {
+		if (unlikely(!nozomi_read_config_table(dc))) {
+			dc->last_ier = 0x0;
+			writew(dc->last_ier, dc->reg_ier);
+			dev_err(&dc->pdev->dev, "Could not read status from "
+				"card, we should disable interface\n");
+		} else {
+			writew(RESET, dc->reg_fcr);
+		}
+		/* No more useful info if this was the reset interrupt. */
+		goto exit_handler;
+	}
+	if (read_iir & CTRL_UL) {
+		DBG1("CTRL_UL");
+		dc->last_ier &= ~CTRL_UL;
+		writew(dc->last_ier, dc->reg_ier);
+		if (send_flow_control(dc)) {
+			writew(CTRL_UL, dc->reg_fcr);
+			dc->last_ier = dc->last_ier | CTRL_UL;
+			writew(dc->last_ier, dc->reg_ier);
+		}
+	}
+	if (read_iir & CTRL_DL) {
+		receive_flow_control(dc);
+		writew(CTRL_DL, dc->reg_fcr);
+	}
+	if (read_iir & MDM_DL) {
+		if (!handle_data_dl(dc, PORT_MDM,
+				&(dc->port[PORT_MDM].toggle_dl), read_iir,
+				MDM_DL1, MDM_DL2)) {
+			dev_err(&dc->pdev->dev, "MDM_DL out of sync!\n");
+			goto exit_handler;
+		}
+	}
+	if (read_iir & MDM_UL) {
+		if (!handle_data_ul(dc, PORT_MDM, read_iir)) {
+			dev_err(&dc->pdev->dev, "MDM_UL out of sync!\n");
+			goto exit_handler;
+		}
+	}
+	if (read_iir & DIAG_DL) {
+		if (!handle_data_dl(dc, PORT_DIAG,
+				&(dc->port[PORT_DIAG].toggle_dl), read_iir,
+				DIAG_DL1, DIAG_DL2)) {
+			dev_err(&dc->pdev->dev, "DIAG_DL out of sync!\n");
+			goto exit_handler;
+		}
+	}
+	if (read_iir & DIAG_UL) {
+		dc->last_ier &= ~DIAG_UL;
+		writew(dc->last_ier, dc->reg_ier);
+		if (send_data(PORT_DIAG, dc)) {
+			writew(DIAG_UL, dc->reg_fcr);
+			dc->last_ier = dc->last_ier | DIAG_UL;
+			writew(dc->last_ier, dc->reg_ier);
+		}
+	}
+	if (read_iir & APP1_DL) {
+		if (receive_data(PORT_APP1, dc))
+			writew(APP1_DL, dc->reg_fcr);
+	}
+	if (read_iir & APP1_UL) {
+		dc->last_ier &= ~APP1_UL;
+		writew(dc->last_ier, dc->reg_ier);
+		if (send_data(PORT_APP1, dc)) {
+			writew(APP1_UL, dc->reg_fcr);
+			dc->last_ier = dc->last_ier | APP1_UL;
+			writew(dc->last_ier, dc->reg_ier);
+		}
+	}
+	if (read_iir & APP2_DL) {
+		if (receive_data(PORT_APP2, dc))
+			writew(APP2_DL, dc->reg_fcr);
+	}
+	if (read_iir & APP2_UL) {
+		dc->last_ier &= ~APP2_UL;
+		writew(dc->last_ier, dc->reg_ier);
+		if (send_data(PORT_APP2, dc)) {
+			writew(APP2_UL, dc->reg_fcr);
+			dc->last_ier = dc->last_ier | APP2_UL;
+			writew(dc->last_ier, dc->reg_ier);
+		}
+	}
+
+exit_handler:
+	spin_unlock(&dc->spin_mutex);
+	for (a = 0; a < NOZOMI_MAX_PORTS; a++) {
+		struct tty_struct *tty;
+		if (test_and_clear_bit(a, &dc->flip)) {
+			tty = tty_port_tty_get(&dc->port[a].port);
+			if (tty)
+				tty_flip_buffer_push(tty);
+			tty_kref_put(tty);
+		}
+	}
+	return IRQ_HANDLED;
+none:
+	spin_unlock(&dc->spin_mutex);
+	return IRQ_NONE;
+}
+
+static void nozomi_get_card_type(struct nozomi *dc)
+{
+	int i;
+	u32 size = 0;
+
+	for (i = 0; i < 6; i++)
+		size += pci_resource_len(dc->pdev, i);
+
+	/* Assume card type F32_8 if no match */
+	dc->card_type = size == 2048 ? F32_2 : F32_8;
+
+	dev_info(&dc->pdev->dev, "Card type is: %d\n", dc->card_type);
+}
+
+static void nozomi_setup_private_data(struct nozomi *dc)
+{
+	void __iomem *offset = dc->base_addr + dc->card_type / 2;
+	unsigned int i;
+
+	dc->reg_fcr = (void __iomem *)(offset + R_FCR);
+	dc->reg_iir = (void __iomem *)(offset + R_IIR);
+	dc->reg_ier = (void __iomem *)(offset + R_IER);
+	dc->last_ier = 0;
+	dc->flip = 0;
+
+	dc->port[PORT_MDM].token_dl = MDM_DL;
+	dc->port[PORT_DIAG].token_dl = DIAG_DL;
+	dc->port[PORT_APP1].token_dl = APP1_DL;
+	dc->port[PORT_APP2].token_dl = APP2_DL;
+
+	for (i = 0; i < MAX_PORT; i++)
+		init_waitqueue_head(&dc->port[i].tty_wait);
+}
+
+static ssize_t card_type_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
+
+	return sprintf(buf, "%d\n", dc->card_type);
+}
+static DEVICE_ATTR(card_type, S_IRUGO, card_type_show, NULL);
+
+static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
+
+	return sprintf(buf, "%u\n", dc->open_ttys);
+}
+static DEVICE_ATTR(open_ttys, S_IRUGO, open_ttys_show, NULL);
+
+static void make_sysfs_files(struct nozomi *dc)
+{
+	if (device_create_file(&dc->pdev->dev, &dev_attr_card_type))
+		dev_err(&dc->pdev->dev,
+			"Could not create sysfs file for card_type\n");
+	if (device_create_file(&dc->pdev->dev, &dev_attr_open_ttys))
+		dev_err(&dc->pdev->dev,
+			"Could not create sysfs file for open_ttys\n");
+}
+
+static void remove_sysfs_files(struct nozomi *dc)
+{
+	device_remove_file(&dc->pdev->dev, &dev_attr_card_type);
+	device_remove_file(&dc->pdev->dev, &dev_attr_open_ttys);
+}
+
+/* Allocate memory for one device */
+static int __devinit nozomi_card_init(struct pci_dev *pdev,
+				      const struct pci_device_id *ent)
+{
+	resource_size_t start;
+	int ret;
+	struct nozomi *dc = NULL;
+	int ndev_idx;
+	int i;
+
+	dev_dbg(&pdev->dev, "Init, new card found\n");
+
+	for (ndev_idx = 0; ndev_idx < ARRAY_SIZE(ndevs); ndev_idx++)
+		if (!ndevs[ndev_idx])
+			break;
+
+	if (ndev_idx >= ARRAY_SIZE(ndevs)) {
+		dev_err(&pdev->dev, "no free tty range for this card left\n");
+		ret = -EIO;
+		goto err;
+	}
+
+	dc = kzalloc(sizeof(struct nozomi), GFP_KERNEL);
+	if (unlikely(!dc)) {
+		dev_err(&pdev->dev, "Could not allocate memory\n");
+		ret = -ENOMEM;
+		goto err_free;
+	}
+
+	dc->pdev = pdev;
+
+	ret = pci_enable_device(dc->pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to enable PCI Device\n");
+		goto err_free;
+	}
+
+	ret = pci_request_regions(dc->pdev, NOZOMI_NAME);
+	if (ret) {
+		dev_err(&pdev->dev, "I/O address 0x%04x already in use\n",
+			(int) /* nozomi_private.io_addr */ 0);
+		goto err_disable_device;
+	}
+
+	start = pci_resource_start(dc->pdev, 0);
+	if (start == 0) {
+		dev_err(&pdev->dev, "No I/O address for card detected\n");
+		ret = -ENODEV;
+		goto err_rel_regs;
+	}
+
+	/* Find out what card type it is */
+	nozomi_get_card_type(dc);
+
+	dc->base_addr = ioremap_nocache(start, dc->card_type);
+	if (!dc->base_addr) {
+		dev_err(&pdev->dev, "Unable to map card MMIO\n");
+		ret = -ENODEV;
+		goto err_rel_regs;
+	}
+
+	dc->send_buf = kmalloc(SEND_BUF_MAX, GFP_KERNEL);
+	if (!dc->send_buf) {
+		dev_err(&pdev->dev, "Could not allocate send buffer?\n");
+		ret = -ENOMEM;
+		goto err_free_sbuf;
+	}
+
+	for (i = PORT_MDM; i < MAX_PORT; i++) {
+		if (kfifo_alloc(&dc->port[i].fifo_ul,
+		      FIFO_BUFFER_SIZE_UL, GFP_ATOMIC)) {
+			dev_err(&pdev->dev,
+					"Could not allocate kfifo buffer\n");
+			ret = -ENOMEM;
+			goto err_free_kfifo;
+		}
+	}
+
+	spin_lock_init(&dc->spin_mutex);
+
+	nozomi_setup_private_data(dc);
+
+	/* Disable all interrupts */
+	dc->last_ier = 0;
+	writew(dc->last_ier, dc->reg_ier);
+
+	ret = request_irq(pdev->irq, &interrupt_handler, IRQF_SHARED,
+			NOZOMI_NAME, dc);
+	if (unlikely(ret)) {
+		dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq);
+		goto err_free_kfifo;
+	}
+
+	DBG1("base_addr: %p", dc->base_addr);
+
+	make_sysfs_files(dc);
+
+	dc->index_start = ndev_idx * MAX_PORT;
+	ndevs[ndev_idx] = dc;
+
+	pci_set_drvdata(pdev, dc);
+
+	/* Enable RESET interrupt */
+	dc->last_ier = RESET;
+	iowrite16(dc->last_ier, dc->reg_ier);
+
+	dc->state = NOZOMI_STATE_ENABLED;
+
+	for (i = 0; i < MAX_PORT; i++) {
+		struct device *tty_dev;
+		struct port *port = &dc->port[i];
+		port->dc = dc;
+		mutex_init(&port->tty_sem);
+		tty_port_init(&port->port);
+		port->port.ops = &noz_tty_port_ops;
+		tty_dev = tty_register_device(ntty_driver, dc->index_start + i,
+							&pdev->dev);
+
+		if (IS_ERR(tty_dev)) {
+			ret = PTR_ERR(tty_dev);
+			dev_err(&pdev->dev, "Could not allocate tty?\n");
+			goto err_free_tty;
+		}
+	}
+
+	return 0;
+
+err_free_tty:
+	for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i)
+		tty_unregister_device(ntty_driver, i);
+err_free_kfifo:
+	for (i = 0; i < MAX_PORT; i++)
+		kfifo_free(&dc->port[i].fifo_ul);
+err_free_sbuf:
+	kfree(dc->send_buf);
+	iounmap(dc->base_addr);
+err_rel_regs:
+	pci_release_regions(pdev);
+err_disable_device:
+	pci_disable_device(pdev);
+err_free:
+	kfree(dc);
+err:
+	return ret;
+}
+
+static void __devexit tty_exit(struct nozomi *dc)
+{
+	unsigned int i;
+
+	DBG1(" ");
+
+	for (i = 0; i < MAX_PORT; ++i) {
+		struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port);
+		if (tty && list_empty(&tty->hangup_work.entry))
+			tty_hangup(tty);
+		tty_kref_put(tty);
+	}
+	/* Racy below - surely should wait for scheduled work to be done or
+	   complete off a hangup method ? */
+	while (dc->open_ttys)
+		msleep(1);
+	for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i)
+		tty_unregister_device(ntty_driver, i);
+}
+
+/* Deallocate memory for one device */
+static void __devexit nozomi_card_exit(struct pci_dev *pdev)
+{
+	int i;
+	struct ctrl_ul ctrl;
+	struct nozomi *dc = pci_get_drvdata(pdev);
+
+	/* Disable all interrupts */
+	dc->last_ier = 0;
+	writew(dc->last_ier, dc->reg_ier);
+
+	tty_exit(dc);
+
+	/* Send 0x0001, command card to resend the reset token.  */
+	/* This is to get the reset when the module is reloaded. */
+	ctrl.port = 0x00;
+	ctrl.reserved = 0;
+	ctrl.RTS = 0;
+	ctrl.DTR = 1;
+	DBG1("sending flow control 0x%04X", *((u16 *)&ctrl));
+
+	/* Setup dc->reg addresses to we can use defines here */
+	write_mem32(dc->port[PORT_CTRL].ul_addr[0], (u32 *)&ctrl, 2);
+	writew(CTRL_UL, dc->reg_fcr);	/* push the token to the card. */
+
+	remove_sysfs_files(dc);
+
+	free_irq(pdev->irq, dc);
+
+	for (i = 0; i < MAX_PORT; i++)
+		kfifo_free(&dc->port[i].fifo_ul);
+
+	kfree(dc->send_buf);
+
+	iounmap(dc->base_addr);
+
+	pci_release_regions(pdev);
+
+	pci_disable_device(pdev);
+
+	ndevs[dc->index_start / MAX_PORT] = NULL;
+
+	kfree(dc);
+}
+
+static void set_rts(const struct tty_struct *tty, int rts)
+{
+	struct port *port = get_port_by_tty(tty);
+
+	port->ctrl_ul.RTS = rts;
+	port->update_flow_control = 1;
+	enable_transmit_ul(PORT_CTRL, get_dc_by_tty(tty));
+}
+
+static void set_dtr(const struct tty_struct *tty, int dtr)
+{
+	struct port *port = get_port_by_tty(tty);
+
+	DBG1("SETTING DTR index: %d, dtr: %d", tty->index, dtr);
+
+	port->ctrl_ul.DTR = dtr;
+	port->update_flow_control = 1;
+	enable_transmit_ul(PORT_CTRL, get_dc_by_tty(tty));
+}
+
+/*
+ * ----------------------------------------------------------------------------
+ * TTY code
+ * ----------------------------------------------------------------------------
+ */
+
+static int ntty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+	struct port *port = get_port_by_tty(tty);
+	struct nozomi *dc = get_dc_by_tty(tty);
+	int ret;
+	if (!port || !dc || dc->state != NOZOMI_STATE_READY)
+		return -ENODEV;
+	ret = tty_init_termios(tty);
+	if (ret == 0) {
+		tty_driver_kref_get(driver);
+		tty->count++;
+		tty->driver_data = port;
+		driver->ttys[tty->index] = tty;
+	}
+	return ret;
+}
+
+static void ntty_cleanup(struct tty_struct *tty)
+{
+	tty->driver_data = NULL;
+}
+
+static int ntty_activate(struct tty_port *tport, struct tty_struct *tty)
+{
+	struct port *port = container_of(tport, struct port, port);
+	struct nozomi *dc = port->dc;
+	unsigned long flags;
+
+	DBG1("open: %d", port->token_dl);
+	spin_lock_irqsave(&dc->spin_mutex, flags);
+	dc->last_ier = dc->last_ier | port->token_dl;
+	writew(dc->last_ier, dc->reg_ier);
+	dc->open_ttys++;
+	spin_unlock_irqrestore(&dc->spin_mutex, flags);
+	printk("noz: activated %d: %p\n", tty->index, tport);
+	return 0;
+}
+
+static int ntty_open(struct tty_struct *tty, struct file *filp)
+{
+	struct port *port = tty->driver_data;
+	return tty_port_open(&port->port, tty, filp);
+}
+
+static void ntty_shutdown(struct tty_port *tport)
+{
+	struct port *port = container_of(tport, struct port, port);
+	struct nozomi *dc = port->dc;
+	unsigned long flags;
+
+	DBG1("close: %d", port->token_dl);
+	spin_lock_irqsave(&dc->spin_mutex, flags);
+	dc->last_ier &= ~(port->token_dl);
+	writew(dc->last_ier, dc->reg_ier);
+	dc->open_ttys--;
+	spin_unlock_irqrestore(&dc->spin_mutex, flags);
+	printk("noz: shutdown %p\n", tport);
+}
+
+static void ntty_close(struct tty_struct *tty, struct file *filp)
+{
+	struct port *port = tty->driver_data;
+	if (port)
+		tty_port_close(&port->port, tty, filp);
+}
+
+static void ntty_hangup(struct tty_struct *tty)
+{
+	struct port *port = tty->driver_data;
+	tty_port_hangup(&port->port);
+}
+
+/*
+ * called when the userspace process writes to the tty (/dev/noz*).
+ * Data is inserted into a fifo, which is then read and transfered to the modem.
+ */
+static int ntty_write(struct tty_struct *tty, const unsigned char *buffer,
+		      int count)
+{
+	int rval = -EINVAL;
+	struct nozomi *dc = get_dc_by_tty(tty);
+	struct port *port = tty->driver_data;
+	unsigned long flags;
+
+	/* DBG1( "WRITEx: %d, index = %d", count, index); */
+
+	if (!dc || !port)
+		return -ENODEV;
+
+	mutex_lock(&port->tty_sem);
+
+	if (unlikely(!port->port.count)) {
+		DBG1(" ");
+		goto exit;
+	}
+
+	rval = kfifo_in(&port->fifo_ul, (unsigned char *)buffer, count);
+
+	/* notify card */
+	if (unlikely(dc == NULL)) {
+		DBG1("No device context?");
+		goto exit;
+	}
+
+	spin_lock_irqsave(&dc->spin_mutex, flags);
+	/* CTS is only valid on the modem channel */
+	if (port == &(dc->port[PORT_MDM])) {
+		if (port->ctrl_dl.CTS) {
+			DBG4("Enable interrupt");
+			enable_transmit_ul(tty->index % MAX_PORT, dc);
+		} else {
+			dev_err(&dc->pdev->dev,
+				"CTS not active on modem port?\n");
+		}
+	} else {
+		enable_transmit_ul(tty->index % MAX_PORT, dc);
+	}
+	spin_unlock_irqrestore(&dc->spin_mutex, flags);
+
+exit:
+	mutex_unlock(&port->tty_sem);
+	return rval;
+}
+
+/*
+ * Calculate how much is left in device
+ * This method is called by the upper tty layer.
+ *   #according to sources N_TTY.c it expects a value >= 0 and
+ *    does not check for negative values.
+ *
+ * If the port is unplugged report lots of room and let the bits
+ * dribble away so we don't block anything.
+ */
+static int ntty_write_room(struct tty_struct *tty)
+{
+	struct port *port = tty->driver_data;
+	int room = 4096;
+	const struct nozomi *dc = get_dc_by_tty(tty);
+
+	if (dc) {
+		mutex_lock(&port->tty_sem);
+		if (port->port.count)
+			room = kfifo_avail(&port->fifo_ul);
+		mutex_unlock(&port->tty_sem);
+	}
+	return room;
+}
+
+/* Gets io control parameters */
+static int ntty_tiocmget(struct tty_struct *tty)
+{
+	const struct port *port = tty->driver_data;
+	const struct ctrl_dl *ctrl_dl = &port->ctrl_dl;
+	const struct ctrl_ul *ctrl_ul = &port->ctrl_ul;
+
+	/* Note: these could change under us but it is not clear this
+	   matters if so */
+	return	(ctrl_ul->RTS ? TIOCM_RTS : 0) |
+		(ctrl_ul->DTR ? TIOCM_DTR : 0) |
+		(ctrl_dl->DCD ? TIOCM_CAR : 0) |
+		(ctrl_dl->RI  ? TIOCM_RNG : 0) |
+		(ctrl_dl->DSR ? TIOCM_DSR : 0) |
+		(ctrl_dl->CTS ? TIOCM_CTS : 0);
+}
+
+/* Sets io controls parameters */
+static int ntty_tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear)
+{
+	struct nozomi *dc = get_dc_by_tty(tty);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dc->spin_mutex, flags);
+	if (set & TIOCM_RTS)
+		set_rts(tty, 1);
+	else if (clear & TIOCM_RTS)
+		set_rts(tty, 0);
+
+	if (set & TIOCM_DTR)
+		set_dtr(tty, 1);
+	else if (clear & TIOCM_DTR)
+		set_dtr(tty, 0);
+	spin_unlock_irqrestore(&dc->spin_mutex, flags);
+
+	return 0;
+}
+
+static int ntty_cflags_changed(struct port *port, unsigned long flags,
+		struct async_icount *cprev)
+{
+	const struct async_icount cnow = port->tty_icount;
+	int ret;
+
+	ret =	((flags & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
+		((flags & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
+		((flags & TIOCM_CD)  && (cnow.dcd != cprev->dcd)) ||
+		((flags & TIOCM_CTS) && (cnow.cts != cprev->cts));
+
+	*cprev = cnow;
+
+	return ret;
+}
+
+static int ntty_tiocgicount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct port *port = tty->driver_data;
+	const struct async_icount cnow = port->tty_icount;
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+	return 0;
+}
+
+static int ntty_ioctl(struct tty_struct *tty,
+		      unsigned int cmd, unsigned long arg)
+{
+	struct port *port = tty->driver_data;
+	int rval = -ENOIOCTLCMD;
+
+	DBG1("******** IOCTL, cmd: %d", cmd);
+
+	switch (cmd) {
+	case TIOCMIWAIT: {
+		struct async_icount cprev = port->tty_icount;
+
+		rval = wait_event_interruptible(port->tty_wait,
+				ntty_cflags_changed(port, arg, &cprev));
+		break;
+	}
+	default:
+		DBG1("ERR: 0x%08X, %d", cmd, cmd);
+		break;
+	};
+
+	return rval;
+}
+
+/*
+ * Called by the upper tty layer when tty buffers are ready
+ * to receive data again after a call to throttle.
+ */
+static void ntty_unthrottle(struct tty_struct *tty)
+{
+	struct nozomi *dc = get_dc_by_tty(tty);
+	unsigned long flags;
+
+	DBG1("UNTHROTTLE");
+	spin_lock_irqsave(&dc->spin_mutex, flags);
+	enable_transmit_dl(tty->index % MAX_PORT, dc);
+	set_rts(tty, 1);
+
+	spin_unlock_irqrestore(&dc->spin_mutex, flags);
+}
+
+/*
+ * Called by the upper tty layer when the tty buffers are almost full.
+ * The driver should stop send more data.
+ */
+static void ntty_throttle(struct tty_struct *tty)
+{
+	struct nozomi *dc = get_dc_by_tty(tty);
+	unsigned long flags;
+
+	DBG1("THROTTLE");
+	spin_lock_irqsave(&dc->spin_mutex, flags);
+	set_rts(tty, 0);
+	spin_unlock_irqrestore(&dc->spin_mutex, flags);
+}
+
+/* Returns number of chars in buffer, called by tty layer */
+static s32 ntty_chars_in_buffer(struct tty_struct *tty)
+{
+	struct port *port = tty->driver_data;
+	struct nozomi *dc = get_dc_by_tty(tty);
+	s32 rval = 0;
+
+	if (unlikely(!dc || !port)) {
+		goto exit_in_buffer;
+	}
+
+	if (unlikely(!port->port.count)) {
+		dev_err(&dc->pdev->dev, "No tty open?\n");
+		goto exit_in_buffer;
+	}
+
+	rval = kfifo_len(&port->fifo_ul);
+
+exit_in_buffer:
+	return rval;
+}
+
+static const struct tty_port_operations noz_tty_port_ops = {
+	.activate = ntty_activate,
+	.shutdown = ntty_shutdown,
+};
+
+static const struct tty_operations tty_ops = {
+	.ioctl = ntty_ioctl,
+	.open = ntty_open,
+	.close = ntty_close,
+	.hangup = ntty_hangup,
+	.write = ntty_write,
+	.write_room = ntty_write_room,
+	.unthrottle = ntty_unthrottle,
+	.throttle = ntty_throttle,
+	.chars_in_buffer = ntty_chars_in_buffer,
+	.tiocmget = ntty_tiocmget,
+	.tiocmset = ntty_tiocmset,
+	.get_icount = ntty_tiocgicount,
+	.install = ntty_install,
+	.cleanup = ntty_cleanup,
+};
+
+/* Module initialization */
+static struct pci_driver nozomi_driver = {
+	.name = NOZOMI_NAME,
+	.id_table = nozomi_pci_tbl,
+	.probe = nozomi_card_init,
+	.remove = __devexit_p(nozomi_card_exit),
+};
+
+static __init int nozomi_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "Initializing %s\n", VERSION_STRING);
+
+	ntty_driver = alloc_tty_driver(NTTY_TTY_MAXMINORS);
+	if (!ntty_driver)
+		return -ENOMEM;
+
+	ntty_driver->owner = THIS_MODULE;
+	ntty_driver->driver_name = NOZOMI_NAME_TTY;
+	ntty_driver->name = "noz";
+	ntty_driver->major = 0;
+	ntty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	ntty_driver->subtype = SERIAL_TYPE_NORMAL;
+	ntty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	ntty_driver->init_termios = tty_std_termios;
+	ntty_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | \
+						HUPCL | CLOCAL;
+	ntty_driver->init_termios.c_ispeed = 115200;
+	ntty_driver->init_termios.c_ospeed = 115200;
+	tty_set_operations(ntty_driver, &tty_ops);
+
+	ret = tty_register_driver(ntty_driver);
+	if (ret) {
+		printk(KERN_ERR "Nozomi: failed to register ntty driver\n");
+		goto free_tty;
+	}
+
+	ret = pci_register_driver(&nozomi_driver);
+	if (ret) {
+		printk(KERN_ERR "Nozomi: can't register pci driver\n");
+		goto unr_tty;
+	}
+
+	return 0;
+unr_tty:
+	tty_unregister_driver(ntty_driver);
+free_tty:
+	put_tty_driver(ntty_driver);
+	return ret;
+}
+
+static __exit void nozomi_exit(void)
+{
+	printk(KERN_INFO "Unloading %s\n", DRIVER_DESC);
+	pci_unregister_driver(&nozomi_driver);
+	tty_unregister_driver(ntty_driver);
+	put_tty_driver(ntty_driver);
+}
+
+module_init(nozomi_init);
+module_exit(nozomi_exit);
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 923a48585501..210774726add 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -23,7 +23,6 @@
 #include <linux/major.h>
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/sysctl.h>
 #include <linux/device.h>
 #include <linux/uaccess.h>
@@ -334,7 +333,7 @@ free_mem_out:
 	return -ENOMEM;
 }
 
-static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
+static int pty_bsd_ioctl(struct tty_struct *tty,
 			 unsigned int cmd, unsigned long arg)
 {
 	switch (cmd) {
@@ -489,7 +488,7 @@ static struct ctl_table pty_root_table[] = {
 };
 
 
-static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file,
+static int pty_unix98_ioctl(struct tty_struct *tty,
 			    unsigned int cmd, unsigned long arg)
 {
 	switch (cmd) {
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
new file mode 100644
index 000000000000..3780da8ad12d
--- /dev/null
+++ b/drivers/tty/rocket.c
@@ -0,0 +1,3199 @@
+/*
+ * RocketPort device driver for Linux
+ *
+ * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000.
+ * 
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc.
+ * 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Kernel Synchronization:
+ *
+ * This driver has 2 kernel control paths - exception handlers (calls into the driver
+ * from user mode) and the timer bottom half (tasklet).  This is a polled driver, interrupts
+ * are not used.
+ *
+ * Critical data: 
+ * -  rp_table[], accessed through passed "info" pointers, is a global (static) array of 
+ *    serial port state information and the xmit_buf circular buffer.  Protected by 
+ *    a per port spinlock.
+ * -  xmit_flags[], an array of ints indexed by line (port) number, indicating that there
+ *    is data to be transmitted.  Protected by atomic bit operations.
+ * -  rp_num_ports, int indicating number of open ports, protected by atomic operations.
+ * 
+ * rp_write() and rp_write_char() functions use a per port semaphore to protect against
+ * simultaneous access to the same port by more than one process.
+ */
+
+/****** Defines ******/
+#define ROCKET_PARANOIA_CHECK
+#define ROCKET_DISABLE_SIMUSAGE
+
+#undef ROCKET_SOFT_FLOW
+#undef ROCKET_DEBUG_OPEN
+#undef ROCKET_DEBUG_INTR
+#undef ROCKET_DEBUG_WRITE
+#undef ROCKET_DEBUG_FLOW
+#undef ROCKET_DEBUG_THROTTLE
+#undef ROCKET_DEBUG_WAIT_UNTIL_SENT
+#undef ROCKET_DEBUG_RECEIVE
+#undef ROCKET_DEBUG_HANGUP
+#undef REV_PCI_ORDER
+#undef ROCKET_DEBUG_IO
+
+#define POLL_PERIOD HZ/100	/*  Polling period .01 seconds (10ms) */
+
+/****** Kernel includes ******/
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/major.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/mutex.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/wait.h>
+#include <linux/pci.h>
+#include <linux/uaccess.h>
+#include <asm/atomic.h>
+#include <asm/unaligned.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+
+/****** RocketPort includes ******/
+
+#include "rocket_int.h"
+#include "rocket.h"
+
+#define ROCKET_VERSION "2.09"
+#define ROCKET_DATE "12-June-2003"
+
+/****** RocketPort Local Variables ******/
+
+static void rp_do_poll(unsigned long dummy);
+
+static struct tty_driver *rocket_driver;
+
+static struct rocket_version driver_version = {	
+	ROCKET_VERSION, ROCKET_DATE
+};
+
+static struct r_port *rp_table[MAX_RP_PORTS];	       /*  The main repository of serial port state information. */
+static unsigned int xmit_flags[NUM_BOARDS];	       /*  Bit significant, indicates port had data to transmit. */
+						       /*  eg.  Bit 0 indicates port 0 has xmit data, ...        */
+static atomic_t rp_num_ports_open;	               /*  Number of serial ports open                           */
+static DEFINE_TIMER(rocket_timer, rp_do_poll, 0, 0);
+
+static unsigned long board1;	                       /* ISA addresses, retrieved from rocketport.conf          */
+static unsigned long board2;
+static unsigned long board3;
+static unsigned long board4;
+static unsigned long controller;
+static int support_low_speed;
+static unsigned long modem1;
+static unsigned long modem2;
+static unsigned long modem3;
+static unsigned long modem4;
+static unsigned long pc104_1[8];
+static unsigned long pc104_2[8];
+static unsigned long pc104_3[8];
+static unsigned long pc104_4[8];
+static unsigned long *pc104[4] = { pc104_1, pc104_2, pc104_3, pc104_4 };
+
+static int rp_baud_base[NUM_BOARDS];	               /*  Board config info (Someday make a per-board structure)  */
+static unsigned long rcktpt_io_addr[NUM_BOARDS];
+static int rcktpt_type[NUM_BOARDS];
+static int is_PCI[NUM_BOARDS];
+static rocketModel_t rocketModel[NUM_BOARDS];
+static int max_board;
+static const struct tty_port_operations rocket_port_ops;
+
+/*
+ * The following arrays define the interrupt bits corresponding to each AIOP.
+ * These bits are different between the ISA and regular PCI boards and the
+ * Universal PCI boards.
+ */
+
+static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = {
+	AIOP_INTR_BIT_0,
+	AIOP_INTR_BIT_1,
+	AIOP_INTR_BIT_2,
+	AIOP_INTR_BIT_3
+};
+
+static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = {
+	UPCI_AIOP_INTR_BIT_0,
+	UPCI_AIOP_INTR_BIT_1,
+	UPCI_AIOP_INTR_BIT_2,
+	UPCI_AIOP_INTR_BIT_3
+};
+
+static Byte_t RData[RDATASIZE] = {
+	0x00, 0x09, 0xf6, 0x82,
+	0x02, 0x09, 0x86, 0xfb,
+	0x04, 0x09, 0x00, 0x0a,
+	0x06, 0x09, 0x01, 0x0a,
+	0x08, 0x09, 0x8a, 0x13,
+	0x0a, 0x09, 0xc5, 0x11,
+	0x0c, 0x09, 0x86, 0x85,
+	0x0e, 0x09, 0x20, 0x0a,
+	0x10, 0x09, 0x21, 0x0a,
+	0x12, 0x09, 0x41, 0xff,
+	0x14, 0x09, 0x82, 0x00,
+	0x16, 0x09, 0x82, 0x7b,
+	0x18, 0x09, 0x8a, 0x7d,
+	0x1a, 0x09, 0x88, 0x81,
+	0x1c, 0x09, 0x86, 0x7a,
+	0x1e, 0x09, 0x84, 0x81,
+	0x20, 0x09, 0x82, 0x7c,
+	0x22, 0x09, 0x0a, 0x0a
+};
+
+static Byte_t RRegData[RREGDATASIZE] = {
+	0x00, 0x09, 0xf6, 0x82,	/* 00: Stop Rx processor */
+	0x08, 0x09, 0x8a, 0x13,	/* 04: Tx software flow control */
+	0x0a, 0x09, 0xc5, 0x11,	/* 08: XON char */
+	0x0c, 0x09, 0x86, 0x85,	/* 0c: XANY */
+	0x12, 0x09, 0x41, 0xff,	/* 10: Rx mask char */
+	0x14, 0x09, 0x82, 0x00,	/* 14: Compare/Ignore #0 */
+	0x16, 0x09, 0x82, 0x7b,	/* 18: Compare #1 */
+	0x18, 0x09, 0x8a, 0x7d,	/* 1c: Compare #2 */
+	0x1a, 0x09, 0x88, 0x81,	/* 20: Interrupt #1 */
+	0x1c, 0x09, 0x86, 0x7a,	/* 24: Ignore/Replace #1 */
+	0x1e, 0x09, 0x84, 0x81,	/* 28: Interrupt #2 */
+	0x20, 0x09, 0x82, 0x7c,	/* 2c: Ignore/Replace #2 */
+	0x22, 0x09, 0x0a, 0x0a	/* 30: Rx FIFO Enable */
+};
+
+static CONTROLLER_T sController[CTL_SIZE] = {
+	{-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
+	 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
+	{-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
+	 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
+	{-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
+	 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
+	{-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
+	 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}
+};
+
+static Byte_t sBitMapClrTbl[8] = {
+	0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f
+};
+
+static Byte_t sBitMapSetTbl[8] = {
+	0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80
+};
+
+static int sClockPrescale = 0x14;
+
+/*
+ *  Line number is the ttySIx number (x), the Minor number.  We 
+ *  assign them sequentially, starting at zero.  The following 
+ *  array keeps track of the line number assigned to a given board/aiop/channel.
+ */
+static unsigned char lineNumbers[MAX_RP_PORTS];
+static unsigned long nextLineNumber;
+
+/*****  RocketPort Static Prototypes   *********/
+static int __init init_ISA(int i);
+static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
+static void rp_flush_buffer(struct tty_struct *tty);
+static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model);
+static unsigned char GetLineNumber(int ctrl, int aiop, int ch);
+static unsigned char SetLineNumber(int ctrl, int aiop, int ch);
+static void rp_start(struct tty_struct *tty);
+static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
+		     int ChanNum);
+static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode);
+static void sFlushRxFIFO(CHANNEL_T * ChP);
+static void sFlushTxFIFO(CHANNEL_T * ChP);
+static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags);
+static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags);
+static void sModemReset(CONTROLLER_T * CtlP, int chan, int on);
+static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on);
+static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data);
+static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
+			      ByteIO_t * AiopIOList, int AiopIOListSize,
+			      WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
+			      int PeriodicOnly, int altChanRingIndicator,
+			      int UPCIRingInd);
+static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
+			   ByteIO_t * AiopIOList, int AiopIOListSize,
+			   int IRQNum, Byte_t Frequency, int PeriodicOnly);
+static int sReadAiopID(ByteIO_t io);
+static int sReadAiopNumChan(WordIO_t io);
+
+MODULE_AUTHOR("Theodore Ts'o");
+MODULE_DESCRIPTION("Comtrol RocketPort driver");
+module_param(board1, ulong, 0);
+MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1");
+module_param(board2, ulong, 0);
+MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2");
+module_param(board3, ulong, 0);
+MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3");
+module_param(board4, ulong, 0);
+MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4");
+module_param(controller, ulong, 0);
+MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller");
+module_param(support_low_speed, bool, 0);
+MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud");
+module_param(modem1, ulong, 0);
+MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem");
+module_param(modem2, ulong, 0);
+MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem");
+module_param(modem3, ulong, 0);
+MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem");
+module_param(modem4, ulong, 0);
+MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem");
+module_param_array(pc104_1, ulong, NULL, 0);
+MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,...");
+module_param_array(pc104_2, ulong, NULL, 0);
+MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,...");
+module_param_array(pc104_3, ulong, NULL, 0);
+MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,...");
+module_param_array(pc104_4, ulong, NULL, 0);
+MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,...");
+
+static int rp_init(void);
+static void rp_cleanup_module(void);
+
+module_init(rp_init);
+module_exit(rp_cleanup_module);
+
+
+MODULE_LICENSE("Dual BSD/GPL");
+
+/*************************************************************************/
+/*                     Module code starts here                           */
+
+static inline int rocket_paranoia_check(struct r_port *info,
+					const char *routine)
+{
+#ifdef ROCKET_PARANOIA_CHECK
+	if (!info)
+		return 1;
+	if (info->magic != RPORT_MAGIC) {
+		printk(KERN_WARNING "Warning: bad magic number for rocketport "
+				"struct in %s\n", routine);
+		return 1;
+	}
+#endif
+	return 0;
+}
+
+
+/*  Serial port receive data function.  Called (from timer poll) when an AIOPIC signals 
+ *  that receive data is present on a serial port.  Pulls data from FIFO, moves it into the 
+ *  tty layer.  
+ */
+static void rp_do_receive(struct r_port *info,
+			  struct tty_struct *tty,
+			  CHANNEL_t * cp, unsigned int ChanStatus)
+{
+	unsigned int CharNStat;
+	int ToRecv, wRecv, space;
+	unsigned char *cbuf;
+
+	ToRecv = sGetRxCnt(cp);
+#ifdef ROCKET_DEBUG_INTR
+	printk(KERN_INFO "rp_do_receive(%d)...\n", ToRecv);
+#endif
+	if (ToRecv == 0)
+		return;
+
+	/*
+	 * if status indicates there are errored characters in the
+	 * FIFO, then enter status mode (a word in FIFO holds
+	 * character and status).
+	 */
+	if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) {
+		if (!(ChanStatus & STATMODE)) {
+#ifdef ROCKET_DEBUG_RECEIVE
+			printk(KERN_INFO "Entering STATMODE...\n");
+#endif
+			ChanStatus |= STATMODE;
+			sEnRxStatusMode(cp);
+		}
+	}
+
+	/* 
+	 * if we previously entered status mode, then read down the
+	 * FIFO one word at a time, pulling apart the character and
+	 * the status.  Update error counters depending on status
+	 */
+	if (ChanStatus & STATMODE) {
+#ifdef ROCKET_DEBUG_RECEIVE
+		printk(KERN_INFO "Ignore %x, read %x...\n",
+			info->ignore_status_mask, info->read_status_mask);
+#endif
+		while (ToRecv) {
+			char flag;
+
+			CharNStat = sInW(sGetTxRxDataIO(cp));
+#ifdef ROCKET_DEBUG_RECEIVE
+			printk(KERN_INFO "%x...\n", CharNStat);
+#endif
+			if (CharNStat & STMBREAKH)
+				CharNStat &= ~(STMFRAMEH | STMPARITYH);
+			if (CharNStat & info->ignore_status_mask) {
+				ToRecv--;
+				continue;
+			}
+			CharNStat &= info->read_status_mask;
+			if (CharNStat & STMBREAKH)
+				flag = TTY_BREAK;
+			else if (CharNStat & STMPARITYH)
+				flag = TTY_PARITY;
+			else if (CharNStat & STMFRAMEH)
+				flag = TTY_FRAME;
+			else if (CharNStat & STMRCVROVRH)
+				flag = TTY_OVERRUN;
+			else
+				flag = TTY_NORMAL;
+			tty_insert_flip_char(tty, CharNStat & 0xff, flag);
+			ToRecv--;
+		}
+
+		/*
+		 * after we've emptied the FIFO in status mode, turn
+		 * status mode back off
+		 */
+		if (sGetRxCnt(cp) == 0) {
+#ifdef ROCKET_DEBUG_RECEIVE
+			printk(KERN_INFO "Status mode off.\n");
+#endif
+			sDisRxStatusMode(cp);
+		}
+	} else {
+		/*
+		 * we aren't in status mode, so read down the FIFO two
+		 * characters at time by doing repeated word IO
+		 * transfer.
+		 */
+		space = tty_prepare_flip_string(tty, &cbuf, ToRecv);
+		if (space < ToRecv) {
+#ifdef ROCKET_DEBUG_RECEIVE
+			printk(KERN_INFO "rp_do_receive:insufficient space ToRecv=%d space=%d\n", ToRecv, space);
+#endif
+			if (space <= 0)
+				return;
+			ToRecv = space;
+		}
+		wRecv = ToRecv >> 1;
+		if (wRecv)
+			sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv);
+		if (ToRecv & 1)
+			cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp));
+	}
+	/*  Push the data up to the tty layer */
+	tty_flip_buffer_push(tty);
+}
+
+/*
+ *  Serial port transmit data function.  Called from the timer polling loop as a 
+ *  result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready
+ *  to be sent out the serial port.  Data is buffered in rp_table[line].xmit_buf, it is 
+ *  moved to the port's xmit FIFO.  *info is critical data, protected by spinlocks.
+ */
+static void rp_do_transmit(struct r_port *info)
+{
+	int c;
+	CHANNEL_t *cp = &info->channel;
+	struct tty_struct *tty;
+	unsigned long flags;
+
+#ifdef ROCKET_DEBUG_INTR
+	printk(KERN_DEBUG "%s\n", __func__);
+#endif
+	if (!info)
+		return;
+	tty = tty_port_tty_get(&info->port);
+
+	if (tty == NULL) {
+		printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__);
+		clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+		return;
+	}
+
+	spin_lock_irqsave(&info->slock, flags);
+	info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
+
+	/*  Loop sending data to FIFO until done or FIFO full */
+	while (1) {
+		if (tty->stopped || tty->hw_stopped)
+			break;
+		c = min(info->xmit_fifo_room, info->xmit_cnt);
+		c = min(c, XMIT_BUF_SIZE - info->xmit_tail);
+		if (c <= 0 || info->xmit_fifo_room <= 0)
+			break;
+		sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2);
+		if (c & 1)
+			sOutB(sGetTxRxDataIO(cp), info->xmit_buf[info->xmit_tail + c - 1]);
+		info->xmit_tail += c;
+		info->xmit_tail &= XMIT_BUF_SIZE - 1;
+		info->xmit_cnt -= c;
+		info->xmit_fifo_room -= c;
+#ifdef ROCKET_DEBUG_INTR
+		printk(KERN_INFO "tx %d chars...\n", c);
+#endif
+	}
+
+	if (info->xmit_cnt == 0)
+		clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+
+	if (info->xmit_cnt < WAKEUP_CHARS) {
+		tty_wakeup(tty);
+#ifdef ROCKETPORT_HAVE_POLL_WAIT
+		wake_up_interruptible(&tty->poll_wait);
+#endif
+	}
+
+	spin_unlock_irqrestore(&info->slock, flags);
+	tty_kref_put(tty);
+
+#ifdef ROCKET_DEBUG_INTR
+	printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head,
+	       info->xmit_tail, info->xmit_fifo_room);
+#endif
+}
+
+/*
+ *  Called when a serial port signals it has read data in it's RX FIFO.
+ *  It checks what interrupts are pending and services them, including
+ *  receiving serial data.  
+ */
+static void rp_handle_port(struct r_port *info)
+{
+	CHANNEL_t *cp;
+	struct tty_struct *tty;
+	unsigned int IntMask, ChanStatus;
+
+	if (!info)
+		return;
+
+	if ((info->port.flags & ASYNC_INITIALIZED) == 0) {
+		printk(KERN_WARNING "rp: WARNING: rp_handle_port called with "
+				"info->flags & NOT_INIT\n");
+		return;
+	}
+	tty = tty_port_tty_get(&info->port);
+	if (!tty) {
+		printk(KERN_WARNING "rp: WARNING: rp_handle_port called with "
+				"tty==NULL\n");
+		return;
+	}
+	cp = &info->channel;
+
+	IntMask = sGetChanIntID(cp) & info->intmask;
+#ifdef ROCKET_DEBUG_INTR
+	printk(KERN_INFO "rp_interrupt %02x...\n", IntMask);
+#endif
+	ChanStatus = sGetChanStatus(cp);
+	if (IntMask & RXF_TRIG) {	/* Rx FIFO trigger level */
+		rp_do_receive(info, tty, cp, ChanStatus);
+	}
+	if (IntMask & DELTA_CD) {	/* CD change  */
+#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP))
+		printk(KERN_INFO "ttyR%d CD now %s...\n", info->line,
+		       (ChanStatus & CD_ACT) ? "on" : "off");
+#endif
+		if (!(ChanStatus & CD_ACT) && info->cd_status) {
+#ifdef ROCKET_DEBUG_HANGUP
+			printk(KERN_INFO "CD drop, calling hangup.\n");
+#endif
+			tty_hangup(tty);
+		}
+		info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0;
+		wake_up_interruptible(&info->port.open_wait);
+	}
+#ifdef ROCKET_DEBUG_INTR
+	if (IntMask & DELTA_CTS) {	/* CTS change */
+		printk(KERN_INFO "CTS change...\n");
+	}
+	if (IntMask & DELTA_DSR) {	/* DSR change */
+		printk(KERN_INFO "DSR change...\n");
+	}
+#endif
+	tty_kref_put(tty);
+}
+
+/*
+ *  The top level polling routine.  Repeats every 1/100 HZ (10ms).
+ */
+static void rp_do_poll(unsigned long dummy)
+{
+	CONTROLLER_t *ctlp;
+	int ctrl, aiop, ch, line;
+	unsigned int xmitmask, i;
+	unsigned int CtlMask;
+	unsigned char AiopMask;
+	Word_t bit;
+
+	/*  Walk through all the boards (ctrl's) */
+	for (ctrl = 0; ctrl < max_board; ctrl++) {
+		if (rcktpt_io_addr[ctrl] <= 0)
+			continue;
+
+		/*  Get a ptr to the board's control struct */
+		ctlp = sCtlNumToCtlPtr(ctrl);
+
+		/*  Get the interrupt status from the board */
+#ifdef CONFIG_PCI
+		if (ctlp->BusType == isPCI)
+			CtlMask = sPCIGetControllerIntStatus(ctlp);
+		else
+#endif
+			CtlMask = sGetControllerIntStatus(ctlp);
+
+		/*  Check if any AIOP read bits are set */
+		for (aiop = 0; CtlMask; aiop++) {
+			bit = ctlp->AiopIntrBits[aiop];
+			if (CtlMask & bit) {
+				CtlMask &= ~bit;
+				AiopMask = sGetAiopIntStatus(ctlp, aiop);
+
+				/*  Check if any port read bits are set */
+				for (ch = 0; AiopMask;  AiopMask >>= 1, ch++) {
+					if (AiopMask & 1) {
+
+						/*  Get the line number (/dev/ttyRx number). */
+						/*  Read the data from the port. */
+						line = GetLineNumber(ctrl, aiop, ch);
+						rp_handle_port(rp_table[line]);
+					}
+				}
+			}
+		}
+
+		xmitmask = xmit_flags[ctrl];
+
+		/*
+		 *  xmit_flags contains bit-significant flags, indicating there is data
+		 *  to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port 
+		 *  1, ... (32 total possible).  The variable i has the aiop and ch 
+		 *  numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc).
+		 */
+		if (xmitmask) {
+			for (i = 0; i < rocketModel[ctrl].numPorts; i++) {
+				if (xmitmask & (1 << i)) {
+					aiop = (i & 0x18) >> 3;
+					ch = i & 0x07;
+					line = GetLineNumber(ctrl, aiop, ch);
+					rp_do_transmit(rp_table[line]);
+				}
+			}
+		}
+	}
+
+	/*
+	 * Reset the timer so we get called at the next clock tick (10ms).
+	 */
+	if (atomic_read(&rp_num_ports_open))
+		mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
+}
+
+/*
+ *  Initializes the r_port structure for a port, as well as enabling the port on 
+ *  the board.  
+ *  Inputs:  board, aiop, chan numbers
+ */
+static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
+{
+	unsigned rocketMode;
+	struct r_port *info;
+	int line;
+	CONTROLLER_T *ctlp;
+
+	/*  Get the next available line number */
+	line = SetLineNumber(board, aiop, chan);
+
+	ctlp = sCtlNumToCtlPtr(board);
+
+	/*  Get a r_port struct for the port, fill it in and save it globally, indexed by line number */
+	info = kzalloc(sizeof (struct r_port), GFP_KERNEL);
+	if (!info) {
+		printk(KERN_ERR "Couldn't allocate info struct for line #%d\n",
+				line);
+		return;
+	}
+
+	info->magic = RPORT_MAGIC;
+	info->line = line;
+	info->ctlp = ctlp;
+	info->board = board;
+	info->aiop = aiop;
+	info->chan = chan;
+	tty_port_init(&info->port);
+	info->port.ops = &rocket_port_ops;
+	init_completion(&info->close_wait);
+	info->flags &= ~ROCKET_MODE_MASK;
+	switch (pc104[board][line]) {
+	case 422:
+		info->flags |= ROCKET_MODE_RS422;
+		break;
+	case 485:
+		info->flags |= ROCKET_MODE_RS485;
+		break;
+	case 232:
+	default:
+		info->flags |= ROCKET_MODE_RS232;
+		break;
+	}
+
+	info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR;
+	if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
+		printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n",
+				board, aiop, chan);
+		kfree(info);
+		return;
+	}
+
+	rocketMode = info->flags & ROCKET_MODE_MASK;
+
+	if ((info->flags & ROCKET_RTS_TOGGLE) || (rocketMode == ROCKET_MODE_RS485))
+		sEnRTSToggle(&info->channel);
+	else
+		sDisRTSToggle(&info->channel);
+
+	if (ctlp->boardType == ROCKET_TYPE_PC104) {
+		switch (rocketMode) {
+		case ROCKET_MODE_RS485:
+			sSetInterfaceMode(&info->channel, InterfaceModeRS485);
+			break;
+		case ROCKET_MODE_RS422:
+			sSetInterfaceMode(&info->channel, InterfaceModeRS422);
+			break;
+		case ROCKET_MODE_RS232:
+		default:
+			if (info->flags & ROCKET_RTS_TOGGLE)
+				sSetInterfaceMode(&info->channel, InterfaceModeRS232T);
+			else
+				sSetInterfaceMode(&info->channel, InterfaceModeRS232);
+			break;
+		}
+	}
+	spin_lock_init(&info->slock);
+	mutex_init(&info->write_mtx);
+	rp_table[line] = info;
+	tty_register_device(rocket_driver, line, pci_dev ? &pci_dev->dev :
+			NULL);
+}
+
+/*
+ *  Configures a rocketport port according to its termio settings.  Called from 
+ *  user mode into the driver (exception handler).  *info CD manipulation is spinlock protected.
+ */
+static void configure_r_port(struct tty_struct *tty, struct r_port *info,
+			     struct ktermios *old_termios)
+{
+	unsigned cflag;
+	unsigned long flags;
+	unsigned rocketMode;
+	int bits, baud, divisor;
+	CHANNEL_t *cp;
+	struct ktermios *t = tty->termios;
+
+	cp = &info->channel;
+	cflag = t->c_cflag;
+
+	/* Byte size and parity */
+	if ((cflag & CSIZE) == CS8) {
+		sSetData8(cp);
+		bits = 10;
+	} else {
+		sSetData7(cp);
+		bits = 9;
+	}
+	if (cflag & CSTOPB) {
+		sSetStop2(cp);
+		bits++;
+	} else {
+		sSetStop1(cp);
+	}
+
+	if (cflag & PARENB) {
+		sEnParity(cp);
+		bits++;
+		if (cflag & PARODD) {
+			sSetOddParity(cp);
+		} else {
+			sSetEvenParity(cp);
+		}
+	} else {
+		sDisParity(cp);
+	}
+
+	/* baud rate */
+	baud = tty_get_baud_rate(tty);
+	if (!baud)
+		baud = 9600;
+	divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1;
+	if ((divisor >= 8192 || divisor < 0) && old_termios) {
+		baud = tty_termios_baud_rate(old_termios);
+		if (!baud)
+			baud = 9600;
+		divisor = (rp_baud_base[info->board] / baud) - 1;
+	}
+	if (divisor >= 8192 || divisor < 0) {
+		baud = 9600;
+		divisor = (rp_baud_base[info->board] / baud) - 1;
+	}
+	info->cps = baud / bits;
+	sSetBaud(cp, divisor);
+
+	/* FIXME: Should really back compute a baud rate from the divisor */
+	tty_encode_baud_rate(tty, baud, baud);
+
+	if (cflag & CRTSCTS) {
+		info->intmask |= DELTA_CTS;
+		sEnCTSFlowCtl(cp);
+	} else {
+		info->intmask &= ~DELTA_CTS;
+		sDisCTSFlowCtl(cp);
+	}
+	if (cflag & CLOCAL) {
+		info->intmask &= ~DELTA_CD;
+	} else {
+		spin_lock_irqsave(&info->slock, flags);
+		if (sGetChanStatus(cp) & CD_ACT)
+			info->cd_status = 1;
+		else
+			info->cd_status = 0;
+		info->intmask |= DELTA_CD;
+		spin_unlock_irqrestore(&info->slock, flags);
+	}
+
+	/*
+	 * Handle software flow control in the board
+	 */
+#ifdef ROCKET_SOFT_FLOW
+	if (I_IXON(tty)) {
+		sEnTxSoftFlowCtl(cp);
+		if (I_IXANY(tty)) {
+			sEnIXANY(cp);
+		} else {
+			sDisIXANY(cp);
+		}
+		sSetTxXONChar(cp, START_CHAR(tty));
+		sSetTxXOFFChar(cp, STOP_CHAR(tty));
+	} else {
+		sDisTxSoftFlowCtl(cp);
+		sDisIXANY(cp);
+		sClrTxXOFF(cp);
+	}
+#endif
+
+	/*
+	 * Set up ignore/read mask words
+	 */
+	info->read_status_mask = STMRCVROVRH | 0xFF;
+	if (I_INPCK(tty))
+		info->read_status_mask |= STMFRAMEH | STMPARITYH;
+	if (I_BRKINT(tty) || I_PARMRK(tty))
+		info->read_status_mask |= STMBREAKH;
+
+	/*
+	 * Characters to ignore
+	 */
+	info->ignore_status_mask = 0;
+	if (I_IGNPAR(tty))
+		info->ignore_status_mask |= STMFRAMEH | STMPARITYH;
+	if (I_IGNBRK(tty)) {
+		info->ignore_status_mask |= STMBREAKH;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too.  (For real raw support).
+		 */
+		if (I_IGNPAR(tty))
+			info->ignore_status_mask |= STMRCVROVRH;
+	}
+
+	rocketMode = info->flags & ROCKET_MODE_MASK;
+
+	if ((info->flags & ROCKET_RTS_TOGGLE)
+	    || (rocketMode == ROCKET_MODE_RS485))
+		sEnRTSToggle(cp);
+	else
+		sDisRTSToggle(cp);
+
+	sSetRTS(&info->channel);
+
+	if (cp->CtlP->boardType == ROCKET_TYPE_PC104) {
+		switch (rocketMode) {
+		case ROCKET_MODE_RS485:
+			sSetInterfaceMode(cp, InterfaceModeRS485);
+			break;
+		case ROCKET_MODE_RS422:
+			sSetInterfaceMode(cp, InterfaceModeRS422);
+			break;
+		case ROCKET_MODE_RS232:
+		default:
+			if (info->flags & ROCKET_RTS_TOGGLE)
+				sSetInterfaceMode(cp, InterfaceModeRS232T);
+			else
+				sSetInterfaceMode(cp, InterfaceModeRS232);
+			break;
+		}
+	}
+}
+
+static int carrier_raised(struct tty_port *port)
+{
+	struct r_port *info = container_of(port, struct r_port, port);
+	return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0;
+}
+
+static void dtr_rts(struct tty_port *port, int on)
+{
+	struct r_port *info = container_of(port, struct r_port, port);
+	if (on) {
+		sSetDTR(&info->channel);
+		sSetRTS(&info->channel);
+	} else {
+		sClrDTR(&info->channel);
+		sClrRTS(&info->channel);
+	}
+}
+
+/*
+ *  Exception handler that opens a serial port.  Creates xmit_buf storage, fills in 
+ *  port's r_port struct.  Initializes the port hardware.  
+ */
+static int rp_open(struct tty_struct *tty, struct file *filp)
+{
+	struct r_port *info;
+	struct tty_port *port;
+	int line = 0, retval;
+	CHANNEL_t *cp;
+	unsigned long page;
+
+	line = tty->index;
+	if (line < 0 || line >= MAX_RP_PORTS || ((info = rp_table[line]) == NULL))
+		return -ENXIO;
+	port = &info->port;
+	
+	page = __get_free_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+
+	if (port->flags & ASYNC_CLOSING) {
+		retval = wait_for_completion_interruptible(&info->close_wait);
+		free_page(page);
+		if (retval)
+			return retval;
+		return ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
+	}
+
+	/*
+	 * We must not sleep from here until the port is marked fully in use.
+	 */
+	if (info->xmit_buf)
+		free_page(page);
+	else
+		info->xmit_buf = (unsigned char *) page;
+
+	tty->driver_data = info;
+	tty_port_tty_set(port, tty);
+
+	if (port->count++ == 0) {
+		atomic_inc(&rp_num_ports_open);
+
+#ifdef ROCKET_DEBUG_OPEN
+		printk(KERN_INFO "rocket mod++ = %d...\n",
+				atomic_read(&rp_num_ports_open));
+#endif
+	}
+#ifdef ROCKET_DEBUG_OPEN
+	printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->port.count);
+#endif
+
+	/*
+	 * Info->count is now 1; so it's safe to sleep now.
+	 */
+	if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) {
+		cp = &info->channel;
+		sSetRxTrigger(cp, TRIG_1);
+		if (sGetChanStatus(cp) & CD_ACT)
+			info->cd_status = 1;
+		else
+			info->cd_status = 0;
+		sDisRxStatusMode(cp);
+		sFlushRxFIFO(cp);
+		sFlushTxFIFO(cp);
+
+		sEnInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
+		sSetRxTrigger(cp, TRIG_1);
+
+		sGetChanStatus(cp);
+		sDisRxStatusMode(cp);
+		sClrTxXOFF(cp);
+
+		sDisCTSFlowCtl(cp);
+		sDisTxSoftFlowCtl(cp);
+
+		sEnRxFIFO(cp);
+		sEnTransmit(cp);
+
+		set_bit(ASYNCB_INITIALIZED, &info->port.flags);
+
+		/*
+		 * Set up the tty->alt_speed kludge
+		 */
+		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
+			tty->alt_speed = 57600;
+		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
+			tty->alt_speed = 115200;
+		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
+			tty->alt_speed = 230400;
+		if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
+			tty->alt_speed = 460800;
+
+		configure_r_port(tty, info, NULL);
+		if (tty->termios->c_cflag & CBAUD) {
+			sSetDTR(cp);
+			sSetRTS(cp);
+		}
+	}
+	/*  Starts (or resets) the maint polling loop */
+	mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
+
+	retval = tty_port_block_til_ready(port, tty, filp);
+	if (retval) {
+#ifdef ROCKET_DEBUG_OPEN
+		printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval);
+#endif
+		return retval;
+	}
+	return 0;
+}
+
+/*
+ *  Exception handler that closes a serial port. info->port.count is considered critical.
+ */
+static void rp_close(struct tty_struct *tty, struct file *filp)
+{
+	struct r_port *info = tty->driver_data;
+	struct tty_port *port = &info->port;
+	int timeout;
+	CHANNEL_t *cp;
+	
+	if (rocket_paranoia_check(info, "rp_close"))
+		return;
+
+#ifdef ROCKET_DEBUG_OPEN
+	printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count);
+#endif
+
+	if (tty_port_close_start(port, tty, filp) == 0)
+		return;
+
+	mutex_lock(&port->mutex);
+	cp = &info->channel;
+	/*
+	 * Before we drop DTR, make sure the UART transmitter
+	 * has completely drained; this is especially
+	 * important if there is a transmit FIFO!
+	 */
+	timeout = (sGetTxCnt(cp) + 1) * HZ / info->cps;
+	if (timeout == 0)
+		timeout = 1;
+	rp_wait_until_sent(tty, timeout);
+	clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+
+	sDisTransmit(cp);
+	sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
+	sDisCTSFlowCtl(cp);
+	sDisTxSoftFlowCtl(cp);
+	sClrTxXOFF(cp);
+	sFlushRxFIFO(cp);
+	sFlushTxFIFO(cp);
+	sClrRTS(cp);
+	if (C_HUPCL(tty))
+		sClrDTR(cp);
+
+	rp_flush_buffer(tty);
+		
+	tty_ldisc_flush(tty);
+
+	clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+
+	/* We can't yet use tty_port_close_end as the buffer handling in this
+	   driver is a bit different to the usual */
+
+	if (port->blocked_open) {
+		if (port->close_delay) {
+			msleep_interruptible(jiffies_to_msecs(port->close_delay));
+		}
+		wake_up_interruptible(&port->open_wait);
+	} else {
+		if (info->xmit_buf) {
+			free_page((unsigned long) info->xmit_buf);
+			info->xmit_buf = NULL;
+		}
+	}
+	spin_lock_irq(&port->lock);
+	info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE);
+	tty->closing = 0;
+	spin_unlock_irq(&port->lock);
+	mutex_unlock(&port->mutex);
+	tty_port_tty_set(port, NULL);
+
+	wake_up_interruptible(&port->close_wait);
+	complete_all(&info->close_wait);
+	atomic_dec(&rp_num_ports_open);
+
+#ifdef ROCKET_DEBUG_OPEN
+	printk(KERN_INFO "rocket mod-- = %d...\n",
+			atomic_read(&rp_num_ports_open));
+	printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line);
+#endif
+
+}
+
+static void rp_set_termios(struct tty_struct *tty,
+			   struct ktermios *old_termios)
+{
+	struct r_port *info = tty->driver_data;
+	CHANNEL_t *cp;
+	unsigned cflag;
+
+	if (rocket_paranoia_check(info, "rp_set_termios"))
+		return;
+
+	cflag = tty->termios->c_cflag;
+
+	/*
+	 * This driver doesn't support CS5 or CS6
+	 */
+	if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6))
+		tty->termios->c_cflag =
+		    ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE));
+	/* Or CMSPAR */
+	tty->termios->c_cflag &= ~CMSPAR;
+
+	configure_r_port(tty, info, old_termios);
+
+	cp = &info->channel;
+
+	/* Handle transition to B0 status */
+	if ((old_termios->c_cflag & CBAUD) && !(tty->termios->c_cflag & CBAUD)) {
+		sClrDTR(cp);
+		sClrRTS(cp);
+	}
+
+	/* Handle transition away from B0 status */
+	if (!(old_termios->c_cflag & CBAUD) && (tty->termios->c_cflag & CBAUD)) {
+		if (!tty->hw_stopped || !(tty->termios->c_cflag & CRTSCTS))
+			sSetRTS(cp);
+		sSetDTR(cp);
+	}
+
+	if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		rp_start(tty);
+	}
+}
+
+static int rp_break(struct tty_struct *tty, int break_state)
+{
+	struct r_port *info = tty->driver_data;
+	unsigned long flags;
+
+	if (rocket_paranoia_check(info, "rp_break"))
+		return -EINVAL;
+
+	spin_lock_irqsave(&info->slock, flags);
+	if (break_state == -1)
+		sSendBreak(&info->channel);
+	else
+		sClrBreak(&info->channel);
+	spin_unlock_irqrestore(&info->slock, flags);
+	return 0;
+}
+
+/*
+ * sGetChanRI used to be a macro in rocket_int.h. When the functionality for
+ * the UPCI boards was added, it was decided to make this a function because
+ * the macro was getting too complicated. All cases except the first one
+ * (UPCIRingInd) are taken directly from the original macro.
+ */
+static int sGetChanRI(CHANNEL_T * ChP)
+{
+	CONTROLLER_t *CtlP = ChP->CtlP;
+	int ChanNum = ChP->ChanNum;
+	int RingInd = 0;
+
+	if (CtlP->UPCIRingInd)
+		RingInd = !(sInB(CtlP->UPCIRingInd) & sBitMapSetTbl[ChanNum]);
+	else if (CtlP->AltChanRingIndicator)
+		RingInd = sInB((ByteIO_t) (ChP->ChanStat + 8)) & DSR_ACT;
+	else if (CtlP->boardType == ROCKET_TYPE_PC104)
+		RingInd = !(sInB(CtlP->AiopIO[3]) & sBitMapSetTbl[ChanNum]);
+
+	return RingInd;
+}
+
+/********************************************************************************************/
+/*  Here are the routines used by rp_ioctl.  These are all called from exception handlers.  */
+
+/*
+ *  Returns the state of the serial modem control lines.  These next 2 functions 
+ *  are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
+ */
+static int rp_tiocmget(struct tty_struct *tty)
+{
+	struct r_port *info = tty->driver_data;
+	unsigned int control, result, ChanStatus;
+
+	ChanStatus = sGetChanStatusLo(&info->channel);
+	control = info->channel.TxControl[3];
+	result = ((control & SET_RTS) ? TIOCM_RTS : 0) | 
+		((control & SET_DTR) ?  TIOCM_DTR : 0) |
+		((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) |
+		(sGetChanRI(&info->channel) ? TIOCM_RNG : 0) |
+		((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0) |
+		((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0);
+
+	return result;
+}
+
+/* 
+ *  Sets the modem control lines
+ */
+static int rp_tiocmset(struct tty_struct *tty,
+				unsigned int set, unsigned int clear)
+{
+	struct r_port *info = tty->driver_data;
+
+	if (set & TIOCM_RTS)
+		info->channel.TxControl[3] |= SET_RTS;
+	if (set & TIOCM_DTR)
+		info->channel.TxControl[3] |= SET_DTR;
+	if (clear & TIOCM_RTS)
+		info->channel.TxControl[3] &= ~SET_RTS;
+	if (clear & TIOCM_DTR)
+		info->channel.TxControl[3] &= ~SET_DTR;
+
+	out32(info->channel.IndexAddr, info->channel.TxControl);
+	return 0;
+}
+
+static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
+{
+	struct rocket_config tmp;
+
+	if (!retinfo)
+		return -EFAULT;
+	memset(&tmp, 0, sizeof (tmp));
+	mutex_lock(&info->port.mutex);
+	tmp.line = info->line;
+	tmp.flags = info->flags;
+	tmp.close_delay = info->port.close_delay;
+	tmp.closing_wait = info->port.closing_wait;
+	tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
+	mutex_unlock(&info->port.mutex);
+
+	if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+static int set_config(struct tty_struct *tty, struct r_port *info,
+					struct rocket_config __user *new_info)
+{
+	struct rocket_config new_serial;
+
+	if (copy_from_user(&new_serial, new_info, sizeof (new_serial)))
+		return -EFAULT;
+
+	mutex_lock(&info->port.mutex);
+	if (!capable(CAP_SYS_ADMIN))
+	{
+		if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) {
+			mutex_unlock(&info->port.mutex);
+			return -EPERM;
+		}
+		info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
+		configure_r_port(tty, info, NULL);
+		mutex_unlock(&info->port.mutex);
+		return 0;
+	}
+
+	info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS));
+	info->port.close_delay = new_serial.close_delay;
+	info->port.closing_wait = new_serial.closing_wait;
+
+	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
+		tty->alt_speed = 57600;
+	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
+		tty->alt_speed = 115200;
+	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
+		tty->alt_speed = 230400;
+	if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
+		tty->alt_speed = 460800;
+	mutex_unlock(&info->port.mutex);
+
+	configure_r_port(tty, info, NULL);
+	return 0;
+}
+
+/*
+ *  This function fills in a rocket_ports struct with information
+ *  about what boards/ports are in the system.  This info is passed
+ *  to user space.  See setrocket.c where the info is used to create
+ *  the /dev/ttyRx ports.
+ */
+static int get_ports(struct r_port *info, struct rocket_ports __user *retports)
+{
+	struct rocket_ports tmp;
+	int board;
+
+	if (!retports)
+		return -EFAULT;
+	memset(&tmp, 0, sizeof (tmp));
+	tmp.tty_major = rocket_driver->major;
+
+	for (board = 0; board < 4; board++) {
+		tmp.rocketModel[board].model = rocketModel[board].model;
+		strcpy(tmp.rocketModel[board].modelString, rocketModel[board].modelString);
+		tmp.rocketModel[board].numPorts = rocketModel[board].numPorts;
+		tmp.rocketModel[board].loadrm2 = rocketModel[board].loadrm2;
+		tmp.rocketModel[board].startingPortNumber = rocketModel[board].startingPortNumber;
+	}
+	if (copy_to_user(retports, &tmp, sizeof (*retports)))
+		return -EFAULT;
+	return 0;
+}
+
+static int reset_rm2(struct r_port *info, void __user *arg)
+{
+	int reset;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	if (copy_from_user(&reset, arg, sizeof (int)))
+		return -EFAULT;
+	if (reset)
+		reset = 1;
+
+	if (rcktpt_type[info->board] != ROCKET_TYPE_MODEMII &&
+            rcktpt_type[info->board] != ROCKET_TYPE_MODEMIII)
+		return -EINVAL;
+
+	if (info->ctlp->BusType == isISA)
+		sModemReset(info->ctlp, info->chan, reset);
+	else
+		sPCIModemReset(info->ctlp, info->chan, reset);
+
+	return 0;
+}
+
+static int get_version(struct r_port *info, struct rocket_version __user *retvers)
+{
+	if (copy_to_user(retvers, &driver_version, sizeof (*retvers)))
+		return -EFAULT;
+	return 0;
+}
+
+/*  IOCTL call handler into the driver */
+static int rp_ioctl(struct tty_struct *tty,
+		    unsigned int cmd, unsigned long arg)
+{
+	struct r_port *info = tty->driver_data;
+	void __user *argp = (void __user *)arg;
+	int ret = 0;
+
+	if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
+		return -ENXIO;
+
+	switch (cmd) {
+	case RCKP_GET_STRUCT:
+		if (copy_to_user(argp, info, sizeof (struct r_port)))
+			ret = -EFAULT;
+		break;
+	case RCKP_GET_CONFIG:
+		ret = get_config(info, argp);
+		break;
+	case RCKP_SET_CONFIG:
+		ret = set_config(tty, info, argp);
+		break;
+	case RCKP_GET_PORTS:
+		ret = get_ports(info, argp);
+		break;
+	case RCKP_RESET_RM2:
+		ret = reset_rm2(info, argp);
+		break;
+	case RCKP_GET_VERSION:
+		ret = get_version(info, argp);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+	}
+	return ret;
+}
+
+static void rp_send_xchar(struct tty_struct *tty, char ch)
+{
+	struct r_port *info = tty->driver_data;
+	CHANNEL_t *cp;
+
+	if (rocket_paranoia_check(info, "rp_send_xchar"))
+		return;
+
+	cp = &info->channel;
+	if (sGetTxCnt(cp))
+		sWriteTxPrioByte(cp, ch);
+	else
+		sWriteTxByte(sGetTxRxDataIO(cp), ch);
+}
+
+static void rp_throttle(struct tty_struct *tty)
+{
+	struct r_port *info = tty->driver_data;
+	CHANNEL_t *cp;
+
+#ifdef ROCKET_DEBUG_THROTTLE
+	printk(KERN_INFO "throttle %s: %d....\n", tty->name,
+	       tty->ldisc.chars_in_buffer(tty));
+#endif
+
+	if (rocket_paranoia_check(info, "rp_throttle"))
+		return;
+
+	cp = &info->channel;
+	if (I_IXOFF(tty))
+		rp_send_xchar(tty, STOP_CHAR(tty));
+
+	sClrRTS(&info->channel);
+}
+
+static void rp_unthrottle(struct tty_struct *tty)
+{
+	struct r_port *info = tty->driver_data;
+	CHANNEL_t *cp;
+#ifdef ROCKET_DEBUG_THROTTLE
+	printk(KERN_INFO "unthrottle %s: %d....\n", tty->name,
+	       tty->ldisc.chars_in_buffer(tty));
+#endif
+
+	if (rocket_paranoia_check(info, "rp_throttle"))
+		return;
+
+	cp = &info->channel;
+	if (I_IXOFF(tty))
+		rp_send_xchar(tty, START_CHAR(tty));
+
+	sSetRTS(&info->channel);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rp_stop() and rp_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ * ------------------------------------------------------------
+ */
+static void rp_stop(struct tty_struct *tty)
+{
+	struct r_port *info = tty->driver_data;
+
+#ifdef ROCKET_DEBUG_FLOW
+	printk(KERN_INFO "stop %s: %d %d....\n", tty->name,
+	       info->xmit_cnt, info->xmit_fifo_room);
+#endif
+
+	if (rocket_paranoia_check(info, "rp_stop"))
+		return;
+
+	if (sGetTxCnt(&info->channel))
+		sDisTransmit(&info->channel);
+}
+
+static void rp_start(struct tty_struct *tty)
+{
+	struct r_port *info = tty->driver_data;
+
+#ifdef ROCKET_DEBUG_FLOW
+	printk(KERN_INFO "start %s: %d %d....\n", tty->name,
+	       info->xmit_cnt, info->xmit_fifo_room);
+#endif
+
+	if (rocket_paranoia_check(info, "rp_stop"))
+		return;
+
+	sEnTransmit(&info->channel);
+	set_bit((info->aiop * 8) + info->chan,
+		(void *) &xmit_flags[info->board]);
+}
+
+/*
+ * rp_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct r_port *info = tty->driver_data;
+	CHANNEL_t *cp;
+	unsigned long orig_jiffies;
+	int check_time, exit_time;
+	int txcnt;
+
+	if (rocket_paranoia_check(info, "rp_wait_until_sent"))
+		return;
+
+	cp = &info->channel;
+
+	orig_jiffies = jiffies;
+#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
+	printk(KERN_INFO "In RP_wait_until_sent(%d) (jiff=%lu)...\n", timeout,
+	       jiffies);
+	printk(KERN_INFO "cps=%d...\n", info->cps);
+#endif
+	while (1) {
+		txcnt = sGetTxCnt(cp);
+		if (!txcnt) {
+			if (sGetChanStatusLo(cp) & TXSHRMT)
+				break;
+			check_time = (HZ / info->cps) / 5;
+		} else {
+			check_time = HZ * txcnt / info->cps;
+		}
+		if (timeout) {
+			exit_time = orig_jiffies + timeout - jiffies;
+			if (exit_time <= 0)
+				break;
+			if (exit_time < check_time)
+				check_time = exit_time;
+		}
+		if (check_time == 0)
+			check_time = 1;
+#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
+		printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...\n", txcnt,
+				jiffies, check_time);
+#endif
+		msleep_interruptible(jiffies_to_msecs(check_time));
+		if (signal_pending(current))
+			break;
+	}
+	__set_current_state(TASK_RUNNING);
+#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
+	printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
+#endif
+}
+
+/*
+ * rp_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+static void rp_hangup(struct tty_struct *tty)
+{
+	CHANNEL_t *cp;
+	struct r_port *info = tty->driver_data;
+	unsigned long flags;
+
+	if (rocket_paranoia_check(info, "rp_hangup"))
+		return;
+
+#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP))
+	printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line);
+#endif
+	rp_flush_buffer(tty);
+	spin_lock_irqsave(&info->port.lock, flags);
+	if (info->port.flags & ASYNC_CLOSING) {
+		spin_unlock_irqrestore(&info->port.lock, flags);
+		return;
+	}
+	if (info->port.count)
+		atomic_dec(&rp_num_ports_open);
+	clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+	spin_unlock_irqrestore(&info->port.lock, flags);
+
+	tty_port_hangup(&info->port);
+
+	cp = &info->channel;
+	sDisRxFIFO(cp);
+	sDisTransmit(cp);
+	sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
+	sDisCTSFlowCtl(cp);
+	sDisTxSoftFlowCtl(cp);
+	sClrTxXOFF(cp);
+	clear_bit(ASYNCB_INITIALIZED, &info->port.flags);
+
+	wake_up_interruptible(&info->port.open_wait);
+}
+
+/*
+ *  Exception handler - write char routine.  The RocketPort driver uses a
+ *  double-buffering strategy, with the twist that if the in-memory CPU
+ *  buffer is empty, and there's space in the transmit FIFO, the
+ *  writing routines will write directly to transmit FIFO.
+ *  Write buffer and counters protected by spinlocks
+ */
+static int rp_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct r_port *info = tty->driver_data;
+	CHANNEL_t *cp;
+	unsigned long flags;
+
+	if (rocket_paranoia_check(info, "rp_put_char"))
+		return 0;
+
+	/*
+	 * Grab the port write mutex, locking out other processes that try to
+	 * write to this port
+	 */
+	mutex_lock(&info->write_mtx);
+
+#ifdef ROCKET_DEBUG_WRITE
+	printk(KERN_INFO "rp_put_char %c...\n", ch);
+#endif
+
+	spin_lock_irqsave(&info->slock, flags);
+	cp = &info->channel;
+
+	if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room == 0)
+		info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
+
+	if (tty->stopped || tty->hw_stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) {
+		info->xmit_buf[info->xmit_head++] = ch;
+		info->xmit_head &= XMIT_BUF_SIZE - 1;
+		info->xmit_cnt++;
+		set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+	} else {
+		sOutB(sGetTxRxDataIO(cp), ch);
+		info->xmit_fifo_room--;
+	}
+	spin_unlock_irqrestore(&info->slock, flags);
+	mutex_unlock(&info->write_mtx);
+	return 1;
+}
+
+/*
+ *  Exception handler - write routine, called when user app writes to the device.
+ *  A per port write mutex is used to protect from another process writing to
+ *  this port at the same time.  This other process could be running on the other CPU
+ *  or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out). 
+ *  Spinlocks protect the info xmit members.
+ */
+static int rp_write(struct tty_struct *tty,
+		    const unsigned char *buf, int count)
+{
+	struct r_port *info = tty->driver_data;
+	CHANNEL_t *cp;
+	const unsigned char *b;
+	int c, retval = 0;
+	unsigned long flags;
+
+	if (count <= 0 || rocket_paranoia_check(info, "rp_write"))
+		return 0;
+
+	if (mutex_lock_interruptible(&info->write_mtx))
+		return -ERESTARTSYS;
+
+#ifdef ROCKET_DEBUG_WRITE
+	printk(KERN_INFO "rp_write %d chars...\n", count);
+#endif
+	cp = &info->channel;
+
+	if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room < count)
+		info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
+
+        /*
+	 *  If the write queue for the port is empty, and there is FIFO space, stuff bytes 
+	 *  into FIFO.  Use the write queue for temp storage.
+         */
+	if (!tty->stopped && !tty->hw_stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
+		c = min(count, info->xmit_fifo_room);
+		b = buf;
+
+		/*  Push data into FIFO, 2 bytes at a time */
+		sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2);
+
+		/*  If there is a byte remaining, write it */
+		if (c & 1)
+			sOutB(sGetTxRxDataIO(cp), b[c - 1]);
+
+		retval += c;
+		buf += c;
+		count -= c;
+
+		spin_lock_irqsave(&info->slock, flags);
+		info->xmit_fifo_room -= c;
+		spin_unlock_irqrestore(&info->slock, flags);
+	}
+
+	/* If count is zero, we wrote it all and are done */
+	if (!count)
+		goto end;
+
+	/*  Write remaining data into the port's xmit_buf */
+	while (1) {
+		/* Hung up ? */
+		if (!test_bit(ASYNCB_NORMAL_ACTIVE, &info->port.flags))
+			goto end;
+		c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1);
+		c = min(c, XMIT_BUF_SIZE - info->xmit_head);
+		if (c <= 0)
+			break;
+
+		b = buf;
+		memcpy(info->xmit_buf + info->xmit_head, b, c);
+
+		spin_lock_irqsave(&info->slock, flags);
+		info->xmit_head =
+		    (info->xmit_head + c) & (XMIT_BUF_SIZE - 1);
+		info->xmit_cnt += c;
+		spin_unlock_irqrestore(&info->slock, flags);
+
+		buf += c;
+		count -= c;
+		retval += c;
+	}
+
+	if ((retval > 0) && !tty->stopped && !tty->hw_stopped)
+		set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+	
+end:
+ 	if (info->xmit_cnt < WAKEUP_CHARS) {
+ 		tty_wakeup(tty);
+#ifdef ROCKETPORT_HAVE_POLL_WAIT
+		wake_up_interruptible(&tty->poll_wait);
+#endif
+	}
+	mutex_unlock(&info->write_mtx);
+	return retval;
+}
+
+/*
+ * Return the number of characters that can be sent.  We estimate
+ * only using the in-memory transmit buffer only, and ignore the
+ * potential space in the transmit FIFO.
+ */
+static int rp_write_room(struct tty_struct *tty)
+{
+	struct r_port *info = tty->driver_data;
+	int ret;
+
+	if (rocket_paranoia_check(info, "rp_write_room"))
+		return 0;
+
+	ret = XMIT_BUF_SIZE - info->xmit_cnt - 1;
+	if (ret < 0)
+		ret = 0;
+#ifdef ROCKET_DEBUG_WRITE
+	printk(KERN_INFO "rp_write_room returns %d...\n", ret);
+#endif
+	return ret;
+}
+
+/*
+ * Return the number of characters in the buffer.  Again, this only
+ * counts those characters in the in-memory transmit buffer.
+ */
+static int rp_chars_in_buffer(struct tty_struct *tty)
+{
+	struct r_port *info = tty->driver_data;
+	CHANNEL_t *cp;
+
+	if (rocket_paranoia_check(info, "rp_chars_in_buffer"))
+		return 0;
+
+	cp = &info->channel;
+
+#ifdef ROCKET_DEBUG_WRITE
+	printk(KERN_INFO "rp_chars_in_buffer returns %d...\n", info->xmit_cnt);
+#endif
+	return info->xmit_cnt;
+}
+
+/*
+ *  Flushes the TX fifo for a port, deletes data in the xmit_buf stored in the
+ *  r_port struct for the port.  Note that spinlock are used to protect info members,
+ *  do not call this function if the spinlock is already held.
+ */
+static void rp_flush_buffer(struct tty_struct *tty)
+{
+	struct r_port *info = tty->driver_data;
+	CHANNEL_t *cp;
+	unsigned long flags;
+
+	if (rocket_paranoia_check(info, "rp_flush_buffer"))
+		return;
+
+	spin_lock_irqsave(&info->slock, flags);
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+	spin_unlock_irqrestore(&info->slock, flags);
+
+#ifdef ROCKETPORT_HAVE_POLL_WAIT
+	wake_up_interruptible(&tty->poll_wait);
+#endif
+	tty_wakeup(tty);
+
+	cp = &info->channel;
+	sFlushTxFIFO(cp);
+}
+
+#ifdef CONFIG_PCI
+
+static struct pci_device_id __devinitdata __used rocket_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, rocket_pci_ids);
+
+/*
+ *  Called when a PCI card is found.  Retrieves and stores model information,
+ *  init's aiopic and serial port hardware.
+ *  Inputs:  i is the board number (0-n)
+ */
+static __init int register_PCI(int i, struct pci_dev *dev)
+{
+	int num_aiops, aiop, max_num_aiops, num_chan, chan;
+	unsigned int aiopio[MAX_AIOPS_PER_BOARD];
+	char *str, *board_type;
+	CONTROLLER_t *ctlp;
+
+	int fast_clock = 0;
+	int altChanRingIndicator = 0;
+	int ports_per_aiop = 8;
+	WordIO_t ConfigIO = 0;
+	ByteIO_t UPCIRingInd = 0;
+
+	if (!dev || pci_enable_device(dev))
+		return 0;
+
+	rcktpt_io_addr[i] = pci_resource_start(dev, 0);
+
+	rcktpt_type[i] = ROCKET_TYPE_NORMAL;
+	rocketModel[i].loadrm2 = 0;
+	rocketModel[i].startingPortNumber = nextLineNumber;
+
+	/*  Depending on the model, set up some config variables */
+	switch (dev->device) {
+	case PCI_DEVICE_ID_RP4QUAD:
+		str = "Quadcable";
+		max_num_aiops = 1;
+		ports_per_aiop = 4;
+		rocketModel[i].model = MODEL_RP4QUAD;
+		strcpy(rocketModel[i].modelString, "RocketPort 4 port w/quad cable");
+		rocketModel[i].numPorts = 4;
+		break;
+	case PCI_DEVICE_ID_RP8OCTA:
+		str = "Octacable";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_RP8OCTA;
+		strcpy(rocketModel[i].modelString, "RocketPort 8 port w/octa cable");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_URP8OCTA:
+		str = "Octacable";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_UPCI_RP8OCTA;
+		strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/octa cable");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_RP8INTF:
+		str = "8";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_RP8INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort 8 port w/external I/F");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_URP8INTF:
+		str = "8";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_UPCI_RP8INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/external I/F");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_RP8J:
+		str = "8J";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_RP8J;
+		strcpy(rocketModel[i].modelString, "RocketPort 8 port w/RJ11 connectors");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_RP4J:
+		str = "4J";
+		max_num_aiops = 1;
+		ports_per_aiop = 4;
+		rocketModel[i].model = MODEL_RP4J;
+		strcpy(rocketModel[i].modelString, "RocketPort 4 port w/RJ45 connectors");
+		rocketModel[i].numPorts = 4;
+		break;
+	case PCI_DEVICE_ID_RP8SNI:
+		str = "8 (DB78 Custom)";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_RP8SNI;
+		strcpy(rocketModel[i].modelString, "RocketPort 8 port w/ custom DB78");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_RP16SNI:
+		str = "16 (DB78 Custom)";
+		max_num_aiops = 2;
+		rocketModel[i].model = MODEL_RP16SNI;
+		strcpy(rocketModel[i].modelString, "RocketPort 16 port w/ custom DB78");
+		rocketModel[i].numPorts = 16;
+		break;
+	case PCI_DEVICE_ID_RP16INTF:
+		str = "16";
+		max_num_aiops = 2;
+		rocketModel[i].model = MODEL_RP16INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort 16 port w/external I/F");
+		rocketModel[i].numPorts = 16;
+		break;
+	case PCI_DEVICE_ID_URP16INTF:
+		str = "16";
+		max_num_aiops = 2;
+		rocketModel[i].model = MODEL_UPCI_RP16INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort UPCI 16 port w/external I/F");
+		rocketModel[i].numPorts = 16;
+		break;
+	case PCI_DEVICE_ID_CRP16INTF:
+		str = "16";
+		max_num_aiops = 2;
+		rocketModel[i].model = MODEL_CPCI_RP16INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort Compact PCI 16 port w/external I/F");
+		rocketModel[i].numPorts = 16;
+		break;
+	case PCI_DEVICE_ID_RP32INTF:
+		str = "32";
+		max_num_aiops = 4;
+		rocketModel[i].model = MODEL_RP32INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort 32 port w/external I/F");
+		rocketModel[i].numPorts = 32;
+		break;
+	case PCI_DEVICE_ID_URP32INTF:
+		str = "32";
+		max_num_aiops = 4;
+		rocketModel[i].model = MODEL_UPCI_RP32INTF;
+		strcpy(rocketModel[i].modelString, "RocketPort UPCI 32 port w/external I/F");
+		rocketModel[i].numPorts = 32;
+		break;
+	case PCI_DEVICE_ID_RPP4:
+		str = "Plus Quadcable";
+		max_num_aiops = 1;
+		ports_per_aiop = 4;
+		altChanRingIndicator++;
+		fast_clock++;
+		rocketModel[i].model = MODEL_RPP4;
+		strcpy(rocketModel[i].modelString, "RocketPort Plus 4 port");
+		rocketModel[i].numPorts = 4;
+		break;
+	case PCI_DEVICE_ID_RPP8:
+		str = "Plus Octacable";
+		max_num_aiops = 2;
+		ports_per_aiop = 4;
+		altChanRingIndicator++;
+		fast_clock++;
+		rocketModel[i].model = MODEL_RPP8;
+		strcpy(rocketModel[i].modelString, "RocketPort Plus 8 port");
+		rocketModel[i].numPorts = 8;
+		break;
+	case PCI_DEVICE_ID_RP2_232:
+		str = "Plus 2 (RS-232)";
+		max_num_aiops = 1;
+		ports_per_aiop = 2;
+		altChanRingIndicator++;
+		fast_clock++;
+		rocketModel[i].model = MODEL_RP2_232;
+		strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS232");
+		rocketModel[i].numPorts = 2;
+		break;
+	case PCI_DEVICE_ID_RP2_422:
+		str = "Plus 2 (RS-422)";
+		max_num_aiops = 1;
+		ports_per_aiop = 2;
+		altChanRingIndicator++;
+		fast_clock++;
+		rocketModel[i].model = MODEL_RP2_422;
+		strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS422");
+		rocketModel[i].numPorts = 2;
+		break;
+	case PCI_DEVICE_ID_RP6M:
+
+		max_num_aiops = 1;
+		ports_per_aiop = 6;
+		str = "6-port";
+
+		/*  If revision is 1, the rocketmodem flash must be loaded.
+		 *  If it is 2 it is a "socketed" version. */
+		if (dev->revision == 1) {
+			rcktpt_type[i] = ROCKET_TYPE_MODEMII;
+			rocketModel[i].loadrm2 = 1;
+		} else {
+			rcktpt_type[i] = ROCKET_TYPE_MODEM;
+		}
+
+		rocketModel[i].model = MODEL_RP6M;
+		strcpy(rocketModel[i].modelString, "RocketModem 6 port");
+		rocketModel[i].numPorts = 6;
+		break;
+	case PCI_DEVICE_ID_RP4M:
+		max_num_aiops = 1;
+		ports_per_aiop = 4;
+		str = "4-port";
+		if (dev->revision == 1) {
+			rcktpt_type[i] = ROCKET_TYPE_MODEMII;
+			rocketModel[i].loadrm2 = 1;
+		} else {
+			rcktpt_type[i] = ROCKET_TYPE_MODEM;
+		}
+
+		rocketModel[i].model = MODEL_RP4M;
+		strcpy(rocketModel[i].modelString, "RocketModem 4 port");
+		rocketModel[i].numPorts = 4;
+		break;
+	default:
+		str = "(unknown/unsupported)";
+		max_num_aiops = 0;
+		break;
+	}
+
+	/*
+	 * Check for UPCI boards.
+	 */
+
+	switch (dev->device) {
+	case PCI_DEVICE_ID_URP32INTF:
+	case PCI_DEVICE_ID_URP8INTF:
+	case PCI_DEVICE_ID_URP16INTF:
+	case PCI_DEVICE_ID_CRP16INTF:
+	case PCI_DEVICE_ID_URP8OCTA:
+		rcktpt_io_addr[i] = pci_resource_start(dev, 2);
+		ConfigIO = pci_resource_start(dev, 1);
+		if (dev->device == PCI_DEVICE_ID_URP8OCTA) {
+			UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
+
+			/*
+			 * Check for octa or quad cable.
+			 */
+			if (!
+			    (sInW(ConfigIO + _PCI_9030_GPIO_CTRL) &
+			     PCI_GPIO_CTRL_8PORT)) {
+				str = "Quadcable";
+				ports_per_aiop = 4;
+				rocketModel[i].numPorts = 4;
+			}
+		}
+		break;
+	case PCI_DEVICE_ID_UPCI_RM3_8PORT:
+		str = "8 ports";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_UPCI_RM3_8PORT;
+		strcpy(rocketModel[i].modelString, "RocketModem III 8 port");
+		rocketModel[i].numPorts = 8;
+		rcktpt_io_addr[i] = pci_resource_start(dev, 2);
+		UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
+		ConfigIO = pci_resource_start(dev, 1);
+		rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
+		break;
+	case PCI_DEVICE_ID_UPCI_RM3_4PORT:
+		str = "4 ports";
+		max_num_aiops = 1;
+		rocketModel[i].model = MODEL_UPCI_RM3_4PORT;
+		strcpy(rocketModel[i].modelString, "RocketModem III 4 port");
+		rocketModel[i].numPorts = 4;
+		rcktpt_io_addr[i] = pci_resource_start(dev, 2);
+		UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
+		ConfigIO = pci_resource_start(dev, 1);
+		rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
+		break;
+	default:
+		break;
+	}
+
+	switch (rcktpt_type[i]) {
+	case ROCKET_TYPE_MODEM:
+		board_type = "RocketModem";
+		break;
+	case ROCKET_TYPE_MODEMII:
+		board_type = "RocketModem II";
+		break;
+	case ROCKET_TYPE_MODEMIII:
+		board_type = "RocketModem III";
+		break;
+	default:
+		board_type = "RocketPort";
+		break;
+	}
+
+	if (fast_clock) {
+		sClockPrescale = 0x12;	/* mod 2 (divide by 3) */
+		rp_baud_base[i] = 921600;
+	} else {
+		/*
+		 * If support_low_speed is set, use the slow clock
+		 * prescale, which supports 50 bps
+		 */
+		if (support_low_speed) {
+			/* mod 9 (divide by 10) prescale */
+			sClockPrescale = 0x19;
+			rp_baud_base[i] = 230400;
+		} else {
+			/* mod 4 (devide by 5) prescale */
+			sClockPrescale = 0x14;
+			rp_baud_base[i] = 460800;
+		}
+	}
+
+	for (aiop = 0; aiop < max_num_aiops; aiop++)
+		aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x40);
+	ctlp = sCtlNumToCtlPtr(i);
+	num_aiops = sPCIInitController(ctlp, i, aiopio, max_num_aiops, ConfigIO, 0, FREQ_DIS, 0, altChanRingIndicator, UPCIRingInd);
+	for (aiop = 0; aiop < max_num_aiops; aiop++)
+		ctlp->AiopNumChan[aiop] = ports_per_aiop;
+
+	dev_info(&dev->dev, "comtrol PCI controller #%d found at "
+		"address %04lx, %d AIOP(s) (%s), creating ttyR%d - %ld\n",
+		i, rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString,
+		rocketModel[i].startingPortNumber,
+		rocketModel[i].startingPortNumber + rocketModel[i].numPorts-1);
+
+	if (num_aiops <= 0) {
+		rcktpt_io_addr[i] = 0;
+		return (0);
+	}
+	is_PCI[i] = 1;
+
+	/*  Reset the AIOPIC, init the serial ports */
+	for (aiop = 0; aiop < num_aiops; aiop++) {
+		sResetAiopByNum(ctlp, aiop);
+		num_chan = ports_per_aiop;
+		for (chan = 0; chan < num_chan; chan++)
+			init_r_port(i, aiop, chan, dev);
+	}
+
+	/*  Rocket modems must be reset */
+	if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) ||
+	    (rcktpt_type[i] == ROCKET_TYPE_MODEMII) ||
+	    (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) {
+		num_chan = ports_per_aiop;
+		for (chan = 0; chan < num_chan; chan++)
+			sPCIModemReset(ctlp, chan, 1);
+		msleep(500);
+		for (chan = 0; chan < num_chan; chan++)
+			sPCIModemReset(ctlp, chan, 0);
+		msleep(500);
+		rmSpeakerReset(ctlp, rocketModel[i].model);
+	}
+	return (1);
+}
+
+/*
+ *  Probes for PCI cards, inits them if found
+ *  Input:   board_found = number of ISA boards already found, or the
+ *           starting board number
+ *  Returns: Number of PCI boards found
+ */
+static int __init init_PCI(int boards_found)
+{
+	struct pci_dev *dev = NULL;
+	int count = 0;
+
+	/*  Work through the PCI device list, pulling out ours */
+	while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
+		if (register_PCI(count + boards_found, dev))
+			count++;
+	}
+	return (count);
+}
+
+#endif				/* CONFIG_PCI */
+
+/*
+ *  Probes for ISA cards
+ *  Input:   i = the board number to look for
+ *  Returns: 1 if board found, 0 else
+ */
+static int __init init_ISA(int i)
+{
+	int num_aiops, num_chan = 0, total_num_chan = 0;
+	int aiop, chan;
+	unsigned int aiopio[MAX_AIOPS_PER_BOARD];
+	CONTROLLER_t *ctlp;
+	char *type_string;
+
+	/*  If io_addr is zero, no board configured */
+	if (rcktpt_io_addr[i] == 0)
+		return (0);
+
+	/*  Reserve the IO region */
+	if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) {
+		printk(KERN_ERR "Unable to reserve IO region for configured "
+				"ISA RocketPort at address 0x%lx, board not "
+				"installed...\n", rcktpt_io_addr[i]);
+		rcktpt_io_addr[i] = 0;
+		return (0);
+	}
+
+	ctlp = sCtlNumToCtlPtr(i);
+
+	ctlp->boardType = rcktpt_type[i];
+
+	switch (rcktpt_type[i]) {
+	case ROCKET_TYPE_PC104:
+		type_string = "(PC104)";
+		break;
+	case ROCKET_TYPE_MODEM:
+		type_string = "(RocketModem)";
+		break;
+	case ROCKET_TYPE_MODEMII:
+		type_string = "(RocketModem II)";
+		break;
+	default:
+		type_string = "";
+		break;
+	}
+
+	/*
+	 * If support_low_speed is set, use the slow clock prescale,
+	 * which supports 50 bps
+	 */
+	if (support_low_speed) {
+		sClockPrescale = 0x19;	/* mod 9 (divide by 10) prescale */
+		rp_baud_base[i] = 230400;
+	} else {
+		sClockPrescale = 0x14;	/* mod 4 (devide by 5) prescale */
+		rp_baud_base[i] = 460800;
+	}
+
+	for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++)
+		aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400);
+
+	num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio,  MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0);
+
+	if (ctlp->boardType == ROCKET_TYPE_PC104) {
+		sEnAiop(ctlp, 2);	/* only one AIOPIC, but these */
+		sEnAiop(ctlp, 3);	/* CSels used for other stuff */
+	}
+
+	/*  If something went wrong initing the AIOP's release the ISA IO memory */
+	if (num_aiops <= 0) {
+		release_region(rcktpt_io_addr[i], 64);
+		rcktpt_io_addr[i] = 0;
+		return (0);
+	}
+  
+	rocketModel[i].startingPortNumber = nextLineNumber;
+
+	for (aiop = 0; aiop < num_aiops; aiop++) {
+		sResetAiopByNum(ctlp, aiop);
+		sEnAiop(ctlp, aiop);
+		num_chan = sGetAiopNumChan(ctlp, aiop);
+		total_num_chan += num_chan;
+		for (chan = 0; chan < num_chan; chan++)
+			init_r_port(i, aiop, chan, NULL);
+	}
+	is_PCI[i] = 0;
+	if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || (rcktpt_type[i] == ROCKET_TYPE_MODEMII)) {
+		num_chan = sGetAiopNumChan(ctlp, 0);
+		total_num_chan = num_chan;
+		for (chan = 0; chan < num_chan; chan++)
+			sModemReset(ctlp, chan, 1);
+		msleep(500);
+		for (chan = 0; chan < num_chan; chan++)
+			sModemReset(ctlp, chan, 0);
+		msleep(500);
+		strcpy(rocketModel[i].modelString, "RocketModem ISA");
+	} else {
+		strcpy(rocketModel[i].modelString, "RocketPort ISA");
+	}
+	rocketModel[i].numPorts = total_num_chan;
+	rocketModel[i].model = MODEL_ISA;
+
+	printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n", 
+	       i, rcktpt_io_addr[i], num_aiops, type_string);
+
+	printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
+	       rocketModel[i].modelString,
+	       rocketModel[i].startingPortNumber,
+	       rocketModel[i].startingPortNumber +
+	       rocketModel[i].numPorts - 1);
+
+	return (1);
+}
+
+static const struct tty_operations rocket_ops = {
+	.open = rp_open,
+	.close = rp_close,
+	.write = rp_write,
+	.put_char = rp_put_char,
+	.write_room = rp_write_room,
+	.chars_in_buffer = rp_chars_in_buffer,
+	.flush_buffer = rp_flush_buffer,
+	.ioctl = rp_ioctl,
+	.throttle = rp_throttle,
+	.unthrottle = rp_unthrottle,
+	.set_termios = rp_set_termios,
+	.stop = rp_stop,
+	.start = rp_start,
+	.hangup = rp_hangup,
+	.break_ctl = rp_break,
+	.send_xchar = rp_send_xchar,
+	.wait_until_sent = rp_wait_until_sent,
+	.tiocmget = rp_tiocmget,
+	.tiocmset = rp_tiocmset,
+};
+
+static const struct tty_port_operations rocket_port_ops = {
+	.carrier_raised = carrier_raised,
+	.dtr_rts = dtr_rts,
+};
+
+/*
+ * The module "startup" routine; it's run when the module is loaded.
+ */
+static int __init rp_init(void)
+{
+	int ret = -ENOMEM, pci_boards_found, isa_boards_found, i;
+
+	printk(KERN_INFO "RocketPort device driver module, version %s, %s\n",
+	       ROCKET_VERSION, ROCKET_DATE);
+
+	rocket_driver = alloc_tty_driver(MAX_RP_PORTS);
+	if (!rocket_driver)
+		goto err;
+
+	/*
+	 *  If board 1 is non-zero, there is at least one ISA configured.  If controller is 
+	 *  zero, use the default controller IO address of board1 + 0x40.
+	 */
+	if (board1) {
+		if (controller == 0)
+			controller = board1 + 0x40;
+	} else {
+		controller = 0;  /*  Used as a flag, meaning no ISA boards */
+	}
+
+	/*  If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */
+	if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) {
+		printk(KERN_ERR "Unable to reserve IO region for first "
+			"configured ISA RocketPort controller 0x%lx.  "
+			"Driver exiting\n", controller);
+		ret = -EBUSY;
+		goto err_tty;
+	}
+
+	/*  Store ISA variable retrieved from command line or .conf file. */
+	rcktpt_io_addr[0] = board1;
+	rcktpt_io_addr[1] = board2;
+	rcktpt_io_addr[2] = board3;
+	rcktpt_io_addr[3] = board4;
+
+	rcktpt_type[0] = modem1 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
+	rcktpt_type[0] = pc104_1[0] ? ROCKET_TYPE_PC104 : rcktpt_type[0];
+	rcktpt_type[1] = modem2 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
+	rcktpt_type[1] = pc104_2[0] ? ROCKET_TYPE_PC104 : rcktpt_type[1];
+	rcktpt_type[2] = modem3 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
+	rcktpt_type[2] = pc104_3[0] ? ROCKET_TYPE_PC104 : rcktpt_type[2];
+	rcktpt_type[3] = modem4 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
+	rcktpt_type[3] = pc104_4[0] ? ROCKET_TYPE_PC104 : rcktpt_type[3];
+
+	/*
+	 * Set up the tty driver structure and then register this
+	 * driver with the tty layer.
+	 */
+
+	rocket_driver->owner = THIS_MODULE;
+	rocket_driver->flags = TTY_DRIVER_DYNAMIC_DEV;
+	rocket_driver->name = "ttyR";
+	rocket_driver->driver_name = "Comtrol RocketPort";
+	rocket_driver->major = TTY_ROCKET_MAJOR;
+	rocket_driver->minor_start = 0;
+	rocket_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	rocket_driver->subtype = SERIAL_TYPE_NORMAL;
+	rocket_driver->init_termios = tty_std_termios;
+	rocket_driver->init_termios.c_cflag =
+	    B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	rocket_driver->init_termios.c_ispeed = 9600;
+	rocket_driver->init_termios.c_ospeed = 9600;
+#ifdef ROCKET_SOFT_FLOW
+	rocket_driver->flags |= TTY_DRIVER_REAL_RAW;
+#endif
+	tty_set_operations(rocket_driver, &rocket_ops);
+
+	ret = tty_register_driver(rocket_driver);
+	if (ret < 0) {
+		printk(KERN_ERR "Couldn't install tty RocketPort driver\n");
+		goto err_controller;
+	}
+
+#ifdef ROCKET_DEBUG_OPEN
+	printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major);
+#endif
+
+	/*
+	 *  OK, let's probe each of the controllers looking for boards.  Any boards found
+         *  will be initialized here.
+	 */
+	isa_boards_found = 0;
+	pci_boards_found = 0;
+
+	for (i = 0; i < NUM_BOARDS; i++) {
+		if (init_ISA(i))
+			isa_boards_found++;
+	}
+
+#ifdef CONFIG_PCI
+	if (isa_boards_found < NUM_BOARDS)
+		pci_boards_found = init_PCI(isa_boards_found);
+#endif
+
+	max_board = pci_boards_found + isa_boards_found;
+
+	if (max_board == 0) {
+		printk(KERN_ERR "No rocketport ports found; unloading driver\n");
+		ret = -ENXIO;
+		goto err_ttyu;
+	}
+
+	return 0;
+err_ttyu:
+	tty_unregister_driver(rocket_driver);
+err_controller:
+	if (controller)
+		release_region(controller, 4);
+err_tty:
+	put_tty_driver(rocket_driver);
+err:
+	return ret;
+}
+
+
+static void rp_cleanup_module(void)
+{
+	int retval;
+	int i;
+
+	del_timer_sync(&rocket_timer);
+
+	retval = tty_unregister_driver(rocket_driver);
+	if (retval)
+		printk(KERN_ERR "Error %d while trying to unregister "
+		       "rocketport driver\n", -retval);
+
+	for (i = 0; i < MAX_RP_PORTS; i++)
+		if (rp_table[i]) {
+			tty_unregister_device(rocket_driver, i);
+			kfree(rp_table[i]);
+		}
+
+	put_tty_driver(rocket_driver);
+
+	for (i = 0; i < NUM_BOARDS; i++) {
+		if (rcktpt_io_addr[i] <= 0 || is_PCI[i])
+			continue;
+		release_region(rcktpt_io_addr[i], 64);
+	}
+	if (controller)
+		release_region(controller, 4);
+}
+
+/***************************************************************************
+Function: sInitController
+Purpose:  Initialization of controller global registers and controller
+          structure.
+Call:     sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize,
+                          IRQNum,Frequency,PeriodicOnly)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          int CtlNum; Controller number
+          ByteIO_t MudbacIO; Mudbac base I/O address.
+          ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
+             This list must be in the order the AIOPs will be found on the
+             controller.  Once an AIOP in the list is not found, it is
+             assumed that there are no more AIOPs on the controller.
+          int AiopIOListSize; Number of addresses in AiopIOList
+          int IRQNum; Interrupt Request number.  Can be any of the following:
+                         0: Disable global interrupts
+                         3: IRQ 3
+                         4: IRQ 4
+                         5: IRQ 5
+                         9: IRQ 9
+                         10: IRQ 10
+                         11: IRQ 11
+                         12: IRQ 12
+                         15: IRQ 15
+          Byte_t Frequency: A flag identifying the frequency
+                   of the periodic interrupt, can be any one of the following:
+                      FREQ_DIS - periodic interrupt disabled
+                      FREQ_137HZ - 137 Hertz
+                      FREQ_69HZ - 69 Hertz
+                      FREQ_34HZ - 34 Hertz
+                      FREQ_17HZ - 17 Hertz
+                      FREQ_9HZ - 9 Hertz
+                      FREQ_4HZ - 4 Hertz
+                   If IRQNum is set to 0 the Frequency parameter is
+                   overidden, it is forced to a value of FREQ_DIS.
+          int PeriodicOnly: 1 if all interrupts except the periodic
+                               interrupt are to be blocked.
+                            0 is both the periodic interrupt and
+                               other channel interrupts are allowed.
+                            If IRQNum is set to 0 the PeriodicOnly parameter is
+                               overidden, it is forced to a value of 0.
+Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
+               initialization failed.
+
+Comments:
+          If periodic interrupts are to be disabled but AIOP interrupts
+          are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
+
+          If interrupts are to be completely disabled set IRQNum to 0.
+
+          Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
+          invalid combination.
+
+          This function performs initialization of global interrupt modes,
+          but it does not actually enable global interrupts.  To enable
+          and disable global interrupts use functions sEnGlobalInt() and
+          sDisGlobalInt().  Enabling of global interrupts is normally not
+          done until all other initializations are complete.
+
+          Even if interrupts are globally enabled, they must also be
+          individually enabled for each channel that is to generate
+          interrupts.
+
+Warnings: No range checking on any of the parameters is done.
+
+          No context switches are allowed while executing this function.
+
+          After this function all AIOPs on the controller are disabled,
+          they can be enabled with sEnAiop().
+*/
+static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
+			   ByteIO_t * AiopIOList, int AiopIOListSize,
+			   int IRQNum, Byte_t Frequency, int PeriodicOnly)
+{
+	int i;
+	ByteIO_t io;
+	int done;
+
+	CtlP->AiopIntrBits = aiop_intr_bits;
+	CtlP->AltChanRingIndicator = 0;
+	CtlP->CtlNum = CtlNum;
+	CtlP->CtlID = CTLID_0001;	/* controller release 1 */
+	CtlP->BusType = isISA;
+	CtlP->MBaseIO = MudbacIO;
+	CtlP->MReg1IO = MudbacIO + 1;
+	CtlP->MReg2IO = MudbacIO + 2;
+	CtlP->MReg3IO = MudbacIO + 3;
+#if 1
+	CtlP->MReg2 = 0;	/* interrupt disable */
+	CtlP->MReg3 = 0;	/* no periodic interrupts */
+#else
+	if (sIRQMap[IRQNum] == 0) {	/* interrupts globally disabled */
+		CtlP->MReg2 = 0;	/* interrupt disable */
+		CtlP->MReg3 = 0;	/* no periodic interrupts */
+	} else {
+		CtlP->MReg2 = sIRQMap[IRQNum];	/* set IRQ number */
+		CtlP->MReg3 = Frequency;	/* set frequency */
+		if (PeriodicOnly) {	/* periodic interrupt only */
+			CtlP->MReg3 |= PERIODIC_ONLY;
+		}
+	}
+#endif
+	sOutB(CtlP->MReg2IO, CtlP->MReg2);
+	sOutB(CtlP->MReg3IO, CtlP->MReg3);
+	sControllerEOI(CtlP);	/* clear EOI if warm init */
+	/* Init AIOPs */
+	CtlP->NumAiop = 0;
+	for (i = done = 0; i < AiopIOListSize; i++) {
+		io = AiopIOList[i];
+		CtlP->AiopIO[i] = (WordIO_t) io;
+		CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
+		sOutB(CtlP->MReg2IO, CtlP->MReg2 | (i & 0x03));	/* AIOP index */
+		sOutB(MudbacIO, (Byte_t) (io >> 6));	/* set up AIOP I/O in MUDBAC */
+		if (done)
+			continue;
+		sEnAiop(CtlP, i);	/* enable the AIOP */
+		CtlP->AiopID[i] = sReadAiopID(io);	/* read AIOP ID */
+		if (CtlP->AiopID[i] == AIOPID_NULL)	/* if AIOP does not exist */
+			done = 1;	/* done looking for AIOPs */
+		else {
+			CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io);	/* num channels in AIOP */
+			sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);	/* clock prescaler */
+			sOutB(io + _INDX_DATA, sClockPrescale);
+			CtlP->NumAiop++;	/* bump count of AIOPs */
+		}
+		sDisAiop(CtlP, i);	/* disable AIOP */
+	}
+
+	if (CtlP->NumAiop == 0)
+		return (-1);
+	else
+		return (CtlP->NumAiop);
+}
+
+/***************************************************************************
+Function: sPCIInitController
+Purpose:  Initialization of controller global registers and controller
+          structure.
+Call:     sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
+                          IRQNum,Frequency,PeriodicOnly)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          int CtlNum; Controller number
+          ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
+             This list must be in the order the AIOPs will be found on the
+             controller.  Once an AIOP in the list is not found, it is
+             assumed that there are no more AIOPs on the controller.
+          int AiopIOListSize; Number of addresses in AiopIOList
+          int IRQNum; Interrupt Request number.  Can be any of the following:
+                         0: Disable global interrupts
+                         3: IRQ 3
+                         4: IRQ 4
+                         5: IRQ 5
+                         9: IRQ 9
+                         10: IRQ 10
+                         11: IRQ 11
+                         12: IRQ 12
+                         15: IRQ 15
+          Byte_t Frequency: A flag identifying the frequency
+                   of the periodic interrupt, can be any one of the following:
+                      FREQ_DIS - periodic interrupt disabled
+                      FREQ_137HZ - 137 Hertz
+                      FREQ_69HZ - 69 Hertz
+                      FREQ_34HZ - 34 Hertz
+                      FREQ_17HZ - 17 Hertz
+                      FREQ_9HZ - 9 Hertz
+                      FREQ_4HZ - 4 Hertz
+                   If IRQNum is set to 0 the Frequency parameter is
+                   overidden, it is forced to a value of FREQ_DIS.
+          int PeriodicOnly: 1 if all interrupts except the periodic
+                               interrupt are to be blocked.
+                            0 is both the periodic interrupt and
+                               other channel interrupts are allowed.
+                            If IRQNum is set to 0 the PeriodicOnly parameter is
+                               overidden, it is forced to a value of 0.
+Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
+               initialization failed.
+
+Comments:
+          If periodic interrupts are to be disabled but AIOP interrupts
+          are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
+
+          If interrupts are to be completely disabled set IRQNum to 0.
+
+          Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
+          invalid combination.
+
+          This function performs initialization of global interrupt modes,
+          but it does not actually enable global interrupts.  To enable
+          and disable global interrupts use functions sEnGlobalInt() and
+          sDisGlobalInt().  Enabling of global interrupts is normally not
+          done until all other initializations are complete.
+
+          Even if interrupts are globally enabled, they must also be
+          individually enabled for each channel that is to generate
+          interrupts.
+
+Warnings: No range checking on any of the parameters is done.
+
+          No context switches are allowed while executing this function.
+
+          After this function all AIOPs on the controller are disabled,
+          they can be enabled with sEnAiop().
+*/
+static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
+			      ByteIO_t * AiopIOList, int AiopIOListSize,
+			      WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
+			      int PeriodicOnly, int altChanRingIndicator,
+			      int UPCIRingInd)
+{
+	int i;
+	ByteIO_t io;
+
+	CtlP->AltChanRingIndicator = altChanRingIndicator;
+	CtlP->UPCIRingInd = UPCIRingInd;
+	CtlP->CtlNum = CtlNum;
+	CtlP->CtlID = CTLID_0001;	/* controller release 1 */
+	CtlP->BusType = isPCI;	/* controller release 1 */
+
+	if (ConfigIO) {
+		CtlP->isUPCI = 1;
+		CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
+		CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
+		CtlP->AiopIntrBits = upci_aiop_intr_bits;
+	} else {
+		CtlP->isUPCI = 0;
+		CtlP->PCIIO =
+		    (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
+		CtlP->AiopIntrBits = aiop_intr_bits;
+	}
+
+	sPCIControllerEOI(CtlP);	/* clear EOI if warm init */
+	/* Init AIOPs */
+	CtlP->NumAiop = 0;
+	for (i = 0; i < AiopIOListSize; i++) {
+		io = AiopIOList[i];
+		CtlP->AiopIO[i] = (WordIO_t) io;
+		CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
+
+		CtlP->AiopID[i] = sReadAiopID(io);	/* read AIOP ID */
+		if (CtlP->AiopID[i] == AIOPID_NULL)	/* if AIOP does not exist */
+			break;	/* done looking for AIOPs */
+
+		CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io);	/* num channels in AIOP */
+		sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);	/* clock prescaler */
+		sOutB(io + _INDX_DATA, sClockPrescale);
+		CtlP->NumAiop++;	/* bump count of AIOPs */
+	}
+
+	if (CtlP->NumAiop == 0)
+		return (-1);
+	else
+		return (CtlP->NumAiop);
+}
+
+/***************************************************************************
+Function: sReadAiopID
+Purpose:  Read the AIOP idenfication number directly from an AIOP.
+Call:     sReadAiopID(io)
+          ByteIO_t io: AIOP base I/O address
+Return:   int: Flag AIOPID_XXXX if a valid AIOP is found, where X
+                 is replace by an identifying number.
+          Flag AIOPID_NULL if no valid AIOP is found
+Warnings: No context switches are allowed while executing this function.
+
+*/
+static int sReadAiopID(ByteIO_t io)
+{
+	Byte_t AiopID;		/* ID byte from AIOP */
+
+	sOutB(io + _CMD_REG, RESET_ALL);	/* reset AIOP */
+	sOutB(io + _CMD_REG, 0x0);
+	AiopID = sInW(io + _CHN_STAT0) & 0x07;
+	if (AiopID == 0x06)
+		return (1);
+	else			/* AIOP does not exist */
+		return (-1);
+}
+
+/***************************************************************************
+Function: sReadAiopNumChan
+Purpose:  Read the number of channels available in an AIOP directly from
+          an AIOP.
+Call:     sReadAiopNumChan(io)
+          WordIO_t io: AIOP base I/O address
+Return:   int: The number of channels available
+Comments: The number of channels is determined by write/reads from identical
+          offsets within the SRAM address spaces for channels 0 and 4.
+          If the channel 4 space is mirrored to channel 0 it is a 4 channel
+          AIOP, otherwise it is an 8 channel.
+Warnings: No context switches are allowed while executing this function.
+*/
+static int sReadAiopNumChan(WordIO_t io)
+{
+	Word_t x;
+	static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 };
+
+	/* write to chan 0 SRAM */
+	out32((DWordIO_t) io + _INDX_ADDR, R);
+	sOutW(io + _INDX_ADDR, 0);	/* read from SRAM, chan 0 */
+	x = sInW(io + _INDX_DATA);
+	sOutW(io + _INDX_ADDR, 0x4000);	/* read from SRAM, chan 4 */
+	if (x != sInW(io + _INDX_DATA))	/* if different must be 8 chan */
+		return (8);
+	else
+		return (4);
+}
+
+/***************************************************************************
+Function: sInitChan
+Purpose:  Initialization of a channel and channel structure
+Call:     sInitChan(CtlP,ChP,AiopNum,ChanNum)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          CHANNEL_T *ChP; Ptr to channel structure
+          int AiopNum; AIOP number within controller
+          int ChanNum; Channel number within AIOP
+Return:   int: 1 if initialization succeeded, 0 if it fails because channel
+               number exceeds number of channels available in AIOP.
+Comments: This function must be called before a channel can be used.
+Warnings: No range checking on any of the parameters is done.
+
+          No context switches are allowed while executing this function.
+*/
+static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
+		     int ChanNum)
+{
+	int i;
+	WordIO_t AiopIO;
+	WordIO_t ChIOOff;
+	Byte_t *ChR;
+	Word_t ChOff;
+	static Byte_t R[4];
+	int brd9600;
+
+	if (ChanNum >= CtlP->AiopNumChan[AiopNum])
+		return 0;	/* exceeds num chans in AIOP */
+
+	/* Channel, AIOP, and controller identifiers */
+	ChP->CtlP = CtlP;
+	ChP->ChanID = CtlP->AiopID[AiopNum];
+	ChP->AiopNum = AiopNum;
+	ChP->ChanNum = ChanNum;
+
+	/* Global direct addresses */
+	AiopIO = CtlP->AiopIO[AiopNum];
+	ChP->Cmd = (ByteIO_t) AiopIO + _CMD_REG;
+	ChP->IntChan = (ByteIO_t) AiopIO + _INT_CHAN;
+	ChP->IntMask = (ByteIO_t) AiopIO + _INT_MASK;
+	ChP->IndexAddr = (DWordIO_t) AiopIO + _INDX_ADDR;
+	ChP->IndexData = AiopIO + _INDX_DATA;
+
+	/* Channel direct addresses */
+	ChIOOff = AiopIO + ChP->ChanNum * 2;
+	ChP->TxRxData = ChIOOff + _TD0;
+	ChP->ChanStat = ChIOOff + _CHN_STAT0;
+	ChP->TxRxCount = ChIOOff + _FIFO_CNT0;
+	ChP->IntID = (ByteIO_t) AiopIO + ChP->ChanNum + _INT_ID0;
+
+	/* Initialize the channel from the RData array */
+	for (i = 0; i < RDATASIZE; i += 4) {
+		R[0] = RData[i];
+		R[1] = RData[i + 1] + 0x10 * ChanNum;
+		R[2] = RData[i + 2];
+		R[3] = RData[i + 3];
+		out32(ChP->IndexAddr, R);
+	}
+
+	ChR = ChP->R;
+	for (i = 0; i < RREGDATASIZE; i += 4) {
+		ChR[i] = RRegData[i];
+		ChR[i + 1] = RRegData[i + 1] + 0x10 * ChanNum;
+		ChR[i + 2] = RRegData[i + 2];
+		ChR[i + 3] = RRegData[i + 3];
+	}
+
+	/* Indexed registers */
+	ChOff = (Word_t) ChanNum *0x1000;
+
+	if (sClockPrescale == 0x14)
+		brd9600 = 47;
+	else
+		brd9600 = 23;
+
+	ChP->BaudDiv[0] = (Byte_t) (ChOff + _BAUD);
+	ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8);
+	ChP->BaudDiv[2] = (Byte_t) brd9600;
+	ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8);
+	out32(ChP->IndexAddr, ChP->BaudDiv);
+
+	ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL);
+	ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8);
+	ChP->TxControl[2] = 0;
+	ChP->TxControl[3] = 0;
+	out32(ChP->IndexAddr, ChP->TxControl);
+
+	ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL);
+	ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8);
+	ChP->RxControl[2] = 0;
+	ChP->RxControl[3] = 0;
+	out32(ChP->IndexAddr, ChP->RxControl);
+
+	ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS);
+	ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8);
+	ChP->TxEnables[2] = 0;
+	ChP->TxEnables[3] = 0;
+	out32(ChP->IndexAddr, ChP->TxEnables);
+
+	ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1);
+	ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8);
+	ChP->TxCompare[2] = 0;
+	ChP->TxCompare[3] = 0;
+	out32(ChP->IndexAddr, ChP->TxCompare);
+
+	ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1);
+	ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8);
+	ChP->TxReplace1[2] = 0;
+	ChP->TxReplace1[3] = 0;
+	out32(ChP->IndexAddr, ChP->TxReplace1);
+
+	ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2);
+	ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8);
+	ChP->TxReplace2[2] = 0;
+	ChP->TxReplace2[3] = 0;
+	out32(ChP->IndexAddr, ChP->TxReplace2);
+
+	ChP->TxFIFOPtrs = ChOff + _TXF_OUTP;
+	ChP->TxFIFO = ChOff + _TX_FIFO;
+
+	sOutB(ChP->Cmd, (Byte_t) ChanNum | RESTXFCNT);	/* apply reset Tx FIFO count */
+	sOutB(ChP->Cmd, (Byte_t) ChanNum);	/* remove reset Tx FIFO count */
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs);	/* clear Tx in/out ptrs */
+	sOutW(ChP->IndexData, 0);
+	ChP->RxFIFOPtrs = ChOff + _RXF_OUTP;
+	ChP->RxFIFO = ChOff + _RX_FIFO;
+
+	sOutB(ChP->Cmd, (Byte_t) ChanNum | RESRXFCNT);	/* apply reset Rx FIFO count */
+	sOutB(ChP->Cmd, (Byte_t) ChanNum);	/* remove reset Rx FIFO count */
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs);	/* clear Rx out ptr */
+	sOutW(ChP->IndexData, 0);
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2);	/* clear Rx in ptr */
+	sOutW(ChP->IndexData, 0);
+	ChP->TxPrioCnt = ChOff + _TXP_CNT;
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioCnt);
+	sOutB(ChP->IndexData, 0);
+	ChP->TxPrioPtr = ChOff + _TXP_PNTR;
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioPtr);
+	sOutB(ChP->IndexData, 0);
+	ChP->TxPrioBuf = ChOff + _TXP_BUF;
+	sEnRxProcessor(ChP);	/* start the Rx processor */
+
+	return 1;
+}
+
+/***************************************************************************
+Function: sStopRxProcessor
+Purpose:  Stop the receive processor from processing a channel.
+Call:     sStopRxProcessor(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+
+Comments: The receive processor can be started again with sStartRxProcessor().
+          This function causes the receive processor to skip over the
+          stopped channel.  It does not stop it from processing other channels.
+
+Warnings: No context switches are allowed while executing this function.
+
+          Do not leave the receive processor stopped for more than one
+          character time.
+
+          After calling this function a delay of 4 uS is required to ensure
+          that the receive processor is no longer processing this channel.
+*/
+static void sStopRxProcessor(CHANNEL_T * ChP)
+{
+	Byte_t R[4];
+
+	R[0] = ChP->R[0];
+	R[1] = ChP->R[1];
+	R[2] = 0x0a;
+	R[3] = ChP->R[3];
+	out32(ChP->IndexAddr, R);
+}
+
+/***************************************************************************
+Function: sFlushRxFIFO
+Purpose:  Flush the Rx FIFO
+Call:     sFlushRxFIFO(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Return:   void
+Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
+          while it is being flushed the receive processor is stopped
+          and the transmitter is disabled.  After these operations a
+          4 uS delay is done before clearing the pointers to allow
+          the receive processor to stop.  These items are handled inside
+          this function.
+Warnings: No context switches are allowed while executing this function.
+*/
+static void sFlushRxFIFO(CHANNEL_T * ChP)
+{
+	int i;
+	Byte_t Ch;		/* channel number within AIOP */
+	int RxFIFOEnabled;	/* 1 if Rx FIFO enabled */
+
+	if (sGetRxCnt(ChP) == 0)	/* Rx FIFO empty */
+		return;		/* don't need to flush */
+
+	RxFIFOEnabled = 0;
+	if (ChP->R[0x32] == 0x08) {	/* Rx FIFO is enabled */
+		RxFIFOEnabled = 1;
+		sDisRxFIFO(ChP);	/* disable it */
+		for (i = 0; i < 2000 / 200; i++)	/* delay 2 uS to allow proc to disable FIFO */
+			sInB(ChP->IntChan);	/* depends on bus i/o timing */
+	}
+	sGetChanStatus(ChP);	/* clear any pending Rx errors in chan stat */
+	Ch = (Byte_t) sGetChanNum(ChP);
+	sOutB(ChP->Cmd, Ch | RESRXFCNT);	/* apply reset Rx FIFO count */
+	sOutB(ChP->Cmd, Ch);	/* remove reset Rx FIFO count */
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs);	/* clear Rx out ptr */
+	sOutW(ChP->IndexData, 0);
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2);	/* clear Rx in ptr */
+	sOutW(ChP->IndexData, 0);
+	if (RxFIFOEnabled)
+		sEnRxFIFO(ChP);	/* enable Rx FIFO */
+}
+
+/***************************************************************************
+Function: sFlushTxFIFO
+Purpose:  Flush the Tx FIFO
+Call:     sFlushTxFIFO(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Return:   void
+Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
+          while it is being flushed the receive processor is stopped
+          and the transmitter is disabled.  After these operations a
+          4 uS delay is done before clearing the pointers to allow
+          the receive processor to stop.  These items are handled inside
+          this function.
+Warnings: No context switches are allowed while executing this function.
+*/
+static void sFlushTxFIFO(CHANNEL_T * ChP)
+{
+	int i;
+	Byte_t Ch;		/* channel number within AIOP */
+	int TxEnabled;		/* 1 if transmitter enabled */
+
+	if (sGetTxCnt(ChP) == 0)	/* Tx FIFO empty */
+		return;		/* don't need to flush */
+
+	TxEnabled = 0;
+	if (ChP->TxControl[3] & TX_ENABLE) {
+		TxEnabled = 1;
+		sDisTransmit(ChP);	/* disable transmitter */
+	}
+	sStopRxProcessor(ChP);	/* stop Rx processor */
+	for (i = 0; i < 4000 / 200; i++)	/* delay 4 uS to allow proc to stop */
+		sInB(ChP->IntChan);	/* depends on bus i/o timing */
+	Ch = (Byte_t) sGetChanNum(ChP);
+	sOutB(ChP->Cmd, Ch | RESTXFCNT);	/* apply reset Tx FIFO count */
+	sOutB(ChP->Cmd, Ch);	/* remove reset Tx FIFO count */
+	sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs);	/* clear Tx in/out ptrs */
+	sOutW(ChP->IndexData, 0);
+	if (TxEnabled)
+		sEnTransmit(ChP);	/* enable transmitter */
+	sStartRxProcessor(ChP);	/* restart Rx processor */
+}
+
+/***************************************************************************
+Function: sWriteTxPrioByte
+Purpose:  Write a byte of priority transmit data to a channel
+Call:     sWriteTxPrioByte(ChP,Data)
+          CHANNEL_T *ChP; Ptr to channel structure
+          Byte_t Data; The transmit data byte
+
+Return:   int: 1 if the bytes is successfully written, otherwise 0.
+
+Comments: The priority byte is transmitted before any data in the Tx FIFO.
+
+Warnings: No context switches are allowed while executing this function.
+*/
+static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data)
+{
+	Byte_t DWBuf[4];	/* buffer for double word writes */
+	Word_t *WordPtr;	/* must be far because Win SS != DS */
+	register DWordIO_t IndexAddr;
+
+	if (sGetTxCnt(ChP) > 1) {	/* write it to Tx priority buffer */
+		IndexAddr = ChP->IndexAddr;
+		sOutW((WordIO_t) IndexAddr, ChP->TxPrioCnt);	/* get priority buffer status */
+		if (sInB((ByteIO_t) ChP->IndexData) & PRI_PEND)	/* priority buffer busy */
+			return (0);	/* nothing sent */
+
+		WordPtr = (Word_t *) (&DWBuf[0]);
+		*WordPtr = ChP->TxPrioBuf;	/* data byte address */
+
+		DWBuf[2] = Data;	/* data byte value */
+		out32(IndexAddr, DWBuf);	/* write it out */
+
+		*WordPtr = ChP->TxPrioCnt;	/* Tx priority count address */
+
+		DWBuf[2] = PRI_PEND + 1;	/* indicate 1 byte pending */
+		DWBuf[3] = 0;	/* priority buffer pointer */
+		out32(IndexAddr, DWBuf);	/* write it out */
+	} else {		/* write it to Tx FIFO */
+
+		sWriteTxByte(sGetTxRxDataIO(ChP), Data);
+	}
+	return (1);		/* 1 byte sent */
+}
+
+/***************************************************************************
+Function: sEnInterrupts
+Purpose:  Enable one or more interrupts for a channel
+Call:     sEnInterrupts(ChP,Flags)
+          CHANNEL_T *ChP; Ptr to channel structure
+          Word_t Flags: Interrupt enable flags, can be any combination
+             of the following flags:
+                TXINT_EN:   Interrupt on Tx FIFO empty
+                RXINT_EN:   Interrupt on Rx FIFO at trigger level (see
+                            sSetRxTrigger())
+                SRCINT_EN:  Interrupt on SRC (Special Rx Condition)
+                MCINT_EN:   Interrupt on modem input change
+                CHANINT_EN: Allow channel interrupt signal to the AIOP's
+                            Interrupt Channel Register.
+Return:   void
+Comments: If an interrupt enable flag is set in Flags, that interrupt will be
+          enabled.  If an interrupt enable flag is not set in Flags, that
+          interrupt will not be changed.  Interrupts can be disabled with
+          function sDisInterrupts().
+
+          This function sets the appropriate bit for the channel in the AIOP's
+          Interrupt Mask Register if the CHANINT_EN flag is set.  This allows
+          this channel's bit to be set in the AIOP's Interrupt Channel Register.
+
+          Interrupts must also be globally enabled before channel interrupts
+          will be passed on to the host.  This is done with function
+          sEnGlobalInt().
+
+          In some cases it may be desirable to disable interrupts globally but
+          enable channel interrupts.  This would allow the global interrupt
+          status register to be used to determine which AIOPs need service.
+*/
+static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags)
+{
+	Byte_t Mask;		/* Interrupt Mask Register */
+
+	ChP->RxControl[2] |=
+	    ((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
+
+	out32(ChP->IndexAddr, ChP->RxControl);
+
+	ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN);
+
+	out32(ChP->IndexAddr, ChP->TxControl);
+
+	if (Flags & CHANINT_EN) {
+		Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum];
+		sOutB(ChP->IntMask, Mask);
+	}
+}
+
+/***************************************************************************
+Function: sDisInterrupts
+Purpose:  Disable one or more interrupts for a channel
+Call:     sDisInterrupts(ChP,Flags)
+          CHANNEL_T *ChP; Ptr to channel structure
+          Word_t Flags: Interrupt flags, can be any combination
+             of the following flags:
+                TXINT_EN:   Interrupt on Tx FIFO empty
+                RXINT_EN:   Interrupt on Rx FIFO at trigger level (see
+                            sSetRxTrigger())
+                SRCINT_EN:  Interrupt on SRC (Special Rx Condition)
+                MCINT_EN:   Interrupt on modem input change
+                CHANINT_EN: Disable channel interrupt signal to the
+                            AIOP's Interrupt Channel Register.
+Return:   void
+Comments: If an interrupt flag is set in Flags, that interrupt will be
+          disabled.  If an interrupt flag is not set in Flags, that
+          interrupt will not be changed.  Interrupts can be enabled with
+          function sEnInterrupts().
+
+          This function clears the appropriate bit for the channel in the AIOP's
+          Interrupt Mask Register if the CHANINT_EN flag is set.  This blocks
+          this channel's bit from being set in the AIOP's Interrupt Channel
+          Register.
+*/
+static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags)
+{
+	Byte_t Mask;		/* Interrupt Mask Register */
+
+	ChP->RxControl[2] &=
+	    ~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
+	out32(ChP->IndexAddr, ChP->RxControl);
+	ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN);
+	out32(ChP->IndexAddr, ChP->TxControl);
+
+	if (Flags & CHANINT_EN) {
+		Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum];
+		sOutB(ChP->IntMask, Mask);
+	}
+}
+
+static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode)
+{
+	sOutB(ChP->CtlP->AiopIO[2], (mode & 0x18) | ChP->ChanNum);
+}
+
+/*
+ *  Not an official SSCI function, but how to reset RocketModems.
+ *  ISA bus version
+ */
+static void sModemReset(CONTROLLER_T * CtlP, int chan, int on)
+{
+	ByteIO_t addr;
+	Byte_t val;
+
+	addr = CtlP->AiopIO[0] + 0x400;
+	val = sInB(CtlP->MReg3IO);
+	/* if AIOP[1] is not enabled, enable it */
+	if ((val & 2) == 0) {
+		val = sInB(CtlP->MReg2IO);
+		sOutB(CtlP->MReg2IO, (val & 0xfc) | (1 & 0x03));
+		sOutB(CtlP->MBaseIO, (unsigned char) (addr >> 6));
+	}
+
+	sEnAiop(CtlP, 1);
+	if (!on)
+		addr += 8;
+	sOutB(addr + chan, 0);	/* apply or remove reset */
+	sDisAiop(CtlP, 1);
+}
+
+/*
+ *  Not an official SSCI function, but how to reset RocketModems.
+ *  PCI bus version
+ */
+static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on)
+{
+	ByteIO_t addr;
+
+	addr = CtlP->AiopIO[0] + 0x40;	/* 2nd AIOP */
+	if (!on)
+		addr += 8;
+	sOutB(addr + chan, 0);	/* apply or remove reset */
+}
+
+/*  Resets the speaker controller on RocketModem II and III devices */
+static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
+{
+	ByteIO_t addr;
+
+	/* RocketModem II speaker control is at the 8th port location of offset 0x40 */
+	if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
+		addr = CtlP->AiopIO[0] + 0x4F;
+		sOutB(addr, 0);
+	}
+
+	/* RocketModem III speaker control is at the 1st port location of offset 0x80 */
+	if ((model == MODEL_UPCI_RM3_8PORT)
+	    || (model == MODEL_UPCI_RM3_4PORT)) {
+		addr = CtlP->AiopIO[0] + 0x88;
+		sOutB(addr, 0);
+	}
+}
+
+/*  Returns the line number given the controller (board), aiop and channel number */
+static unsigned char GetLineNumber(int ctrl, int aiop, int ch)
+{
+	return lineNumbers[(ctrl << 5) | (aiop << 3) | ch];
+}
+
+/*
+ *  Stores the line number associated with a given controller (board), aiop
+ *  and channel number.  
+ *  Returns:  The line number assigned 
+ */
+static unsigned char SetLineNumber(int ctrl, int aiop, int ch)
+{
+	lineNumbers[(ctrl << 5) | (aiop << 3) | ch] = nextLineNumber++;
+	return (nextLineNumber - 1);
+}
diff --git a/drivers/tty/rocket.h b/drivers/tty/rocket.h
new file mode 100644
index 000000000000..ec863f35f1a9
--- /dev/null
+++ b/drivers/tty/rocket.h
@@ -0,0 +1,111 @@
+/*
+ * rocket.h --- the exported interface of the rocket driver to its configuration program.
+ *
+ * Written by Theodore Ts'o, Copyright 1997.
+ * Copyright 1997 Comtrol Corporation. 
+ *
+ */
+
+/*  Model Information Struct */
+typedef struct {
+	unsigned long model;
+	char modelString[80];
+	unsigned long numPorts;
+	int loadrm2;
+	int startingPortNumber;
+} rocketModel_t;
+
+struct rocket_config {
+	int line;
+	int flags;
+	int closing_wait;
+	int close_delay;
+	int port;
+	int reserved[32];
+};
+
+struct rocket_ports {
+	int tty_major;
+	int callout_major;
+	rocketModel_t rocketModel[8];
+};
+
+struct rocket_version {
+	char rocket_version[32];
+	char rocket_date[32];
+	char reserved[64];
+};
+
+/*
+ * Rocketport flags
+ */
+/*#define ROCKET_CALLOUT_NOHUP    0x00000001 */
+#define ROCKET_FORCE_CD		0x00000002
+#define ROCKET_HUP_NOTIFY	0x00000004
+#define ROCKET_SPLIT_TERMIOS	0x00000008
+#define ROCKET_SPD_MASK		0x00000070
+#define ROCKET_SPD_HI		0x00000010	/* Use 56000 instead of 38400 bps */
+#define ROCKET_SPD_VHI		0x00000020	/* Use 115200 instead of 38400 bps */
+#define ROCKET_SPD_SHI		0x00000030	/* Use 230400 instead of 38400 bps */
+#define ROCKET_SPD_WARP	        0x00000040	/* Use 460800 instead of 38400 bps */
+#define ROCKET_SAK		0x00000080
+#define ROCKET_SESSION_LOCKOUT	0x00000100
+#define ROCKET_PGRP_LOCKOUT	0x00000200
+#define ROCKET_RTS_TOGGLE	0x00000400
+#define ROCKET_MODE_MASK        0x00003000
+#define ROCKET_MODE_RS232       0x00000000
+#define ROCKET_MODE_RS485       0x00001000
+#define ROCKET_MODE_RS422       0x00002000
+#define ROCKET_FLAGS		0x00003FFF
+
+#define ROCKET_USR_MASK 0x0071	/* Legal flags that non-privileged
+				 * users can set or reset */
+
+/*
+ * For closing_wait and closing_wait2
+ */
+#define ROCKET_CLOSING_WAIT_NONE	ASYNC_CLOSING_WAIT_NONE
+#define ROCKET_CLOSING_WAIT_INF		ASYNC_CLOSING_WAIT_INF
+
+/*
+ * Rocketport ioctls -- "RP"
+ */
+#define RCKP_GET_STRUCT		0x00525001
+#define RCKP_GET_CONFIG		0x00525002
+#define RCKP_SET_CONFIG		0x00525003
+#define RCKP_GET_PORTS		0x00525004
+#define RCKP_RESET_RM2		0x00525005
+#define RCKP_GET_VERSION	0x00525006
+
+/*  Rocketport Models */
+#define MODEL_RP32INTF        0x0001	/* RP 32 port w/external I/F   */
+#define MODEL_RP8INTF         0x0002	/* RP 8 port w/external I/F    */
+#define MODEL_RP16INTF        0x0003	/* RP 16 port w/external I/F   */
+#define MODEL_RP8OCTA         0x0005	/* RP 8 port w/octa cable      */
+#define MODEL_RP4QUAD         0x0004	/* RP 4 port w/quad cable      */
+#define MODEL_RP8J            0x0006	/* RP 8 port w/RJ11 connectors */
+#define MODEL_RP4J            0x0007	/* RP 4 port w/RJ45 connectors */
+#define MODEL_RP8SNI          0x0008	/* RP 8 port w/ DB78 SNI connector */
+#define MODEL_RP16SNI         0x0009	/* RP 16 port w/ DB78 SNI connector */
+#define MODEL_RPP4            0x000A	/* RP Plus 4 port              */
+#define MODEL_RPP8            0x000B	/* RP Plus 8 port              */
+#define MODEL_RP2_232         0x000E	/* RP Plus 2 port RS232        */
+#define MODEL_RP2_422         0x000F	/* RP Plus 2 port RS232        */
+
+/*  Rocketmodem II Models */
+#define MODEL_RP6M            0x000C	/* RM 6 port                   */
+#define MODEL_RP4M            0x000D	/* RM 4 port                   */
+
+/* Universal PCI boards */
+#define MODEL_UPCI_RP32INTF   0x0801	/* RP UPCI 32 port w/external I/F     */
+#define MODEL_UPCI_RP8INTF    0x0802	/* RP UPCI 8 port w/external I/F      */
+#define MODEL_UPCI_RP16INTF   0x0803	/* RP UPCI 16 port w/external I/F     */
+#define MODEL_UPCI_RP8OCTA    0x0805	/* RP UPCI 8 port w/octa cable        */ 
+#define MODEL_UPCI_RM3_8PORT  0x080C	/* RP UPCI Rocketmodem III 8 port     */
+#define MODEL_UPCI_RM3_4PORT  0x080C	/* RP UPCI Rocketmodem III 4 port     */
+
+/*  Compact PCI 16 port  */
+#define MODEL_CPCI_RP16INTF   0x0903	/* RP Compact PCI 16 port w/external I/F */
+
+/* All ISA boards */
+#define MODEL_ISA             0x1000
diff --git a/drivers/tty/rocket_int.h b/drivers/tty/rocket_int.h
new file mode 100644
index 000000000000..67e0f1e778a2
--- /dev/null
+++ b/drivers/tty/rocket_int.h
@@ -0,0 +1,1214 @@
+/*
+ * rocket_int.h --- internal header file for rocket.c
+ *
+ * Written by Theodore Ts'o, Copyright 1997.
+ * Copyright 1997 Comtrol Corporation.  
+ * 
+ */
+
+/*
+ * Definition of the types in rcktpt_type
+ */
+#define ROCKET_TYPE_NORMAL	0
+#define ROCKET_TYPE_MODEM	1
+#define ROCKET_TYPE_MODEMII	2
+#define ROCKET_TYPE_MODEMIII	3
+#define ROCKET_TYPE_PC104       4
+
+#include <linux/mutex.h>
+
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+typedef unsigned char Byte_t;
+typedef unsigned int ByteIO_t;
+
+typedef unsigned int Word_t;
+typedef unsigned int WordIO_t;
+
+typedef unsigned int DWordIO_t;
+
+/*
+ * Note!  Normally the Linux I/O macros already take care of
+ * byte-swapping the I/O instructions.  However, all accesses using
+ * sOutDW aren't really 32-bit accesses, but should be handled in byte
+ * order.  Hence the use of the cpu_to_le32() macro to byte-swap
+ * things to no-op the byte swapping done by the big-endian outl()
+ * instruction.
+ */
+
+static inline void sOutB(unsigned short port, unsigned char value)
+{
+#ifdef ROCKET_DEBUG_IO
+	printk(KERN_DEBUG "sOutB(%x, %x)...\n", port, value);
+#endif
+	outb_p(value, port);
+}
+
+static inline void sOutW(unsigned short port, unsigned short value)
+{
+#ifdef ROCKET_DEBUG_IO
+	printk(KERN_DEBUG "sOutW(%x, %x)...\n", port, value);
+#endif
+	outw_p(value, port);
+}
+
+static inline void out32(unsigned short port, Byte_t *p)
+{
+	u32 value = get_unaligned_le32(p);
+#ifdef ROCKET_DEBUG_IO
+	printk(KERN_DEBUG "out32(%x, %lx)...\n", port, value);
+#endif
+	outl_p(value, port);
+}
+
+static inline unsigned char sInB(unsigned short port)
+{
+	return inb_p(port);
+}
+
+static inline unsigned short sInW(unsigned short port)
+{
+	return inw_p(port);
+}
+
+/* This is used to move arrays of bytes so byte swapping isn't appropriate. */
+#define sOutStrW(port, addr, count) if (count) outsw(port, addr, count)
+#define sInStrW(port, addr, count) if (count) insw(port, addr, count)
+
+#define CTL_SIZE 8
+#define AIOP_CTL_SIZE 4
+#define CHAN_AIOP_SIZE 8
+#define MAX_PORTS_PER_AIOP 8
+#define MAX_AIOPS_PER_BOARD 4
+#define MAX_PORTS_PER_BOARD 32
+
+/* Bus type ID */
+#define	isISA	0
+#define	isPCI	1
+#define	isMC	2
+
+/* Controller ID numbers */
+#define CTLID_NULL  -1		/* no controller exists */
+#define CTLID_0001  0x0001	/* controller release 1 */
+
+/* AIOP ID numbers, identifies AIOP type implementing channel */
+#define AIOPID_NULL -1		/* no AIOP or channel exists */
+#define AIOPID_0001 0x0001	/* AIOP release 1 */
+
+/************************************************************************
+ Global Register Offsets - Direct Access - Fixed values
+************************************************************************/
+
+#define _CMD_REG   0x38		/* Command Register            8    Write */
+#define _INT_CHAN  0x39		/* Interrupt Channel Register  8    Read */
+#define _INT_MASK  0x3A		/* Interrupt Mask Register     8    Read / Write */
+#define _UNUSED    0x3B		/* Unused                      8 */
+#define _INDX_ADDR 0x3C		/* Index Register Address      16   Write */
+#define _INDX_DATA 0x3E		/* Index Register Data         8/16 Read / Write */
+
+/************************************************************************
+ Channel Register Offsets for 1st channel in AIOP - Direct Access
+************************************************************************/
+#define _TD0       0x00		/* Transmit Data               16   Write */
+#define _RD0       0x00		/* Receive Data                16   Read */
+#define _CHN_STAT0 0x20		/* Channel Status              8/16 Read / Write */
+#define _FIFO_CNT0 0x10		/* Transmit/Receive FIFO Count 16   Read */
+#define _INT_ID0   0x30		/* Interrupt Identification    8    Read */
+
+/************************************************************************
+ Tx Control Register Offsets - Indexed - External - Fixed
+************************************************************************/
+#define _TX_ENBLS  0x980	/* Tx Processor Enables Register 8 Read / Write */
+#define _TXCMP1    0x988	/* Transmit Compare Value #1     8 Read / Write */
+#define _TXCMP2    0x989	/* Transmit Compare Value #2     8 Read / Write */
+#define _TXREP1B1  0x98A	/* Tx Replace Value #1 - Byte 1  8 Read / Write */
+#define _TXREP1B2  0x98B	/* Tx Replace Value #1 - Byte 2  8 Read / Write */
+#define _TXREP2    0x98C	/* Transmit Replace Value #2     8 Read / Write */
+
+/************************************************************************
+Memory Controller Register Offsets - Indexed - External - Fixed
+************************************************************************/
+#define _RX_FIFO    0x000	/* Rx FIFO */
+#define _TX_FIFO    0x800	/* Tx FIFO */
+#define _RXF_OUTP   0x990	/* Rx FIFO OUT pointer        16 Read / Write */
+#define _RXF_INP    0x992	/* Rx FIFO IN pointer         16 Read / Write */
+#define _TXF_OUTP   0x994	/* Tx FIFO OUT pointer        8  Read / Write */
+#define _TXF_INP    0x995	/* Tx FIFO IN pointer         8  Read / Write */
+#define _TXP_CNT    0x996	/* Tx Priority Count          8  Read / Write */
+#define _TXP_PNTR   0x997	/* Tx Priority Pointer        8  Read / Write */
+
+#define PRI_PEND    0x80	/* Priority data pending (bit7, Tx pri cnt) */
+#define TXFIFO_SIZE 255		/* size of Tx FIFO */
+#define RXFIFO_SIZE 1023	/* size of Rx FIFO */
+
+/************************************************************************
+Tx Priority Buffer - Indexed - External - Fixed
+************************************************************************/
+#define _TXP_BUF    0x9C0	/* Tx Priority Buffer  32  Bytes   Read / Write */
+#define TXP_SIZE    0x20	/* 32 bytes */
+
+/************************************************************************
+Channel Register Offsets - Indexed - Internal - Fixed
+************************************************************************/
+
+#define _TX_CTRL    0xFF0	/* Transmit Control               16  Write */
+#define _RX_CTRL    0xFF2	/* Receive Control                 8  Write */
+#define _BAUD       0xFF4	/* Baud Rate                      16  Write */
+#define _CLK_PRE    0xFF6	/* Clock Prescaler                 8  Write */
+
+#define STMBREAK   0x08		/* BREAK */
+#define STMFRAME   0x04		/* framing error */
+#define STMRCVROVR 0x02		/* receiver over run error */
+#define STMPARITY  0x01		/* parity error */
+#define STMERROR   (STMBREAK | STMFRAME | STMPARITY)
+#define STMBREAKH   0x800	/* BREAK */
+#define STMFRAMEH   0x400	/* framing error */
+#define STMRCVROVRH 0x200	/* receiver over run error */
+#define STMPARITYH  0x100	/* parity error */
+#define STMERRORH   (STMBREAKH | STMFRAMEH | STMPARITYH)
+
+#define CTS_ACT   0x20		/* CTS input asserted */
+#define DSR_ACT   0x10		/* DSR input asserted */
+#define CD_ACT    0x08		/* CD input asserted */
+#define TXFIFOMT  0x04		/* Tx FIFO is empty */
+#define TXSHRMT   0x02		/* Tx shift register is empty */
+#define RDA       0x01		/* Rx data available */
+#define DRAINED (TXFIFOMT | TXSHRMT)	/* indicates Tx is drained */
+
+#define STATMODE  0x8000	/* status mode enable bit */
+#define RXFOVERFL 0x2000	/* receive FIFO overflow */
+#define RX2MATCH  0x1000	/* receive compare byte 2 match */
+#define RX1MATCH  0x0800	/* receive compare byte 1 match */
+#define RXBREAK   0x0400	/* received BREAK */
+#define RXFRAME   0x0200	/* received framing error */
+#define RXPARITY  0x0100	/* received parity error */
+#define STATERROR (RXBREAK | RXFRAME | RXPARITY)
+
+#define CTSFC_EN  0x80		/* CTS flow control enable bit */
+#define RTSTOG_EN 0x40		/* RTS toggle enable bit */
+#define TXINT_EN  0x10		/* transmit interrupt enable */
+#define STOP2     0x08		/* enable 2 stop bits (0 = 1 stop) */
+#define PARITY_EN 0x04		/* enable parity (0 = no parity) */
+#define EVEN_PAR  0x02		/* even parity (0 = odd parity) */
+#define DATA8BIT  0x01		/* 8 bit data (0 = 7 bit data) */
+
+#define SETBREAK  0x10		/* send break condition (must clear) */
+#define LOCALLOOP 0x08		/* local loopback set for test */
+#define SET_DTR   0x04		/* assert DTR */
+#define SET_RTS   0x02		/* assert RTS */
+#define TX_ENABLE 0x01		/* enable transmitter */
+
+#define RTSFC_EN  0x40		/* RTS flow control enable */
+#define RXPROC_EN 0x20		/* receive processor enable */
+#define TRIG_NO   0x00		/* Rx FIFO trigger level 0 (no trigger) */
+#define TRIG_1    0x08		/* trigger level 1 char */
+#define TRIG_1_2  0x10		/* trigger level 1/2 */
+#define TRIG_7_8  0x18		/* trigger level 7/8 */
+#define TRIG_MASK 0x18		/* trigger level mask */
+#define SRCINT_EN 0x04		/* special Rx condition interrupt enable */
+#define RXINT_EN  0x02		/* Rx interrupt enable */
+#define MCINT_EN  0x01		/* modem change interrupt enable */
+
+#define RXF_TRIG  0x20		/* Rx FIFO trigger level interrupt */
+#define TXFIFO_MT 0x10		/* Tx FIFO empty interrupt */
+#define SRC_INT   0x08		/* special receive condition interrupt */
+#define DELTA_CD  0x04		/* CD change interrupt */
+#define DELTA_CTS 0x02		/* CTS change interrupt */
+#define DELTA_DSR 0x01		/* DSR change interrupt */
+
+#define REP1W2_EN 0x10		/* replace byte 1 with 2 bytes enable */
+#define IGN2_EN   0x08		/* ignore byte 2 enable */
+#define IGN1_EN   0x04		/* ignore byte 1 enable */
+#define COMP2_EN  0x02		/* compare byte 2 enable */
+#define COMP1_EN  0x01		/* compare byte 1 enable */
+
+#define RESET_ALL 0x80		/* reset AIOP (all channels) */
+#define TXOVERIDE 0x40		/* Transmit software off override */
+#define RESETUART 0x20		/* reset channel's UART */
+#define RESTXFCNT 0x10		/* reset channel's Tx FIFO count register */
+#define RESRXFCNT 0x08		/* reset channel's Rx FIFO count register */
+
+#define INTSTAT0  0x01		/* AIOP 0 interrupt status */
+#define INTSTAT1  0x02		/* AIOP 1 interrupt status */
+#define INTSTAT2  0x04		/* AIOP 2 interrupt status */
+#define INTSTAT3  0x08		/* AIOP 3 interrupt status */
+
+#define INTR_EN   0x08		/* allow interrupts to host */
+#define INT_STROB 0x04		/* strobe and clear interrupt line (EOI) */
+
+/**************************************************************************
+ MUDBAC remapped for PCI
+**************************************************************************/
+
+#define _CFG_INT_PCI  0x40
+#define _PCI_INT_FUNC 0x3A
+
+#define PCI_STROB 0x2000	/* bit 13 of int aiop register */
+#define INTR_EN_PCI   0x0010	/* allow interrupts to host */
+
+/*
+ * Definitions for Universal PCI board registers
+ */
+#define _PCI_9030_INT_CTRL	0x4c          /* Offsets from BAR1 */
+#define _PCI_9030_GPIO_CTRL	0x54
+#define PCI_INT_CTRL_AIOP	0x0001
+#define PCI_GPIO_CTRL_8PORT	0x4000
+#define _PCI_9030_RING_IND	0xc0          /* Offsets from BAR1 */
+
+#define CHAN3_EN  0x08		/* enable AIOP 3 */
+#define CHAN2_EN  0x04		/* enable AIOP 2 */
+#define CHAN1_EN  0x02		/* enable AIOP 1 */
+#define CHAN0_EN  0x01		/* enable AIOP 0 */
+#define FREQ_DIS  0x00
+#define FREQ_274HZ 0x60
+#define FREQ_137HZ 0x50
+#define FREQ_69HZ  0x40
+#define FREQ_34HZ  0x30
+#define FREQ_17HZ  0x20
+#define FREQ_9HZ   0x10
+#define PERIODIC_ONLY 0x80	/* only PERIODIC interrupt */
+
+#define CHANINT_EN 0x0100	/* flags to enable/disable channel ints */
+
+#define RDATASIZE 72
+#define RREGDATASIZE 52
+
+/*
+ * AIOP interrupt bits for ISA/PCI boards and UPCI boards.
+ */
+#define AIOP_INTR_BIT_0		0x0001
+#define AIOP_INTR_BIT_1		0x0002
+#define AIOP_INTR_BIT_2		0x0004
+#define AIOP_INTR_BIT_3		0x0008
+
+#define AIOP_INTR_BITS ( \
+	AIOP_INTR_BIT_0 \
+	| AIOP_INTR_BIT_1 \
+	| AIOP_INTR_BIT_2 \
+	| AIOP_INTR_BIT_3)
+
+#define UPCI_AIOP_INTR_BIT_0	0x0004
+#define UPCI_AIOP_INTR_BIT_1	0x0020
+#define UPCI_AIOP_INTR_BIT_2	0x0100
+#define UPCI_AIOP_INTR_BIT_3	0x0800
+
+#define UPCI_AIOP_INTR_BITS ( \
+	UPCI_AIOP_INTR_BIT_0 \
+	| UPCI_AIOP_INTR_BIT_1 \
+	| UPCI_AIOP_INTR_BIT_2 \
+	| UPCI_AIOP_INTR_BIT_3)
+
+/* Controller level information structure */
+typedef struct {
+	int CtlID;
+	int CtlNum;
+	int BusType;
+	int boardType;
+	int isUPCI;
+	WordIO_t PCIIO;
+	WordIO_t PCIIO2;
+	ByteIO_t MBaseIO;
+	ByteIO_t MReg1IO;
+	ByteIO_t MReg2IO;
+	ByteIO_t MReg3IO;
+	Byte_t MReg2;
+	Byte_t MReg3;
+	int NumAiop;
+	int AltChanRingIndicator;
+	ByteIO_t UPCIRingInd;
+	WordIO_t AiopIO[AIOP_CTL_SIZE];
+	ByteIO_t AiopIntChanIO[AIOP_CTL_SIZE];
+	int AiopID[AIOP_CTL_SIZE];
+	int AiopNumChan[AIOP_CTL_SIZE];
+	Word_t *AiopIntrBits;
+} CONTROLLER_T;
+
+typedef CONTROLLER_T CONTROLLER_t;
+
+/* Channel level information structure */
+typedef struct {
+	CONTROLLER_T *CtlP;
+	int AiopNum;
+	int ChanID;
+	int ChanNum;
+	int rtsToggle;
+
+	ByteIO_t Cmd;
+	ByteIO_t IntChan;
+	ByteIO_t IntMask;
+	DWordIO_t IndexAddr;
+	WordIO_t IndexData;
+
+	WordIO_t TxRxData;
+	WordIO_t ChanStat;
+	WordIO_t TxRxCount;
+	ByteIO_t IntID;
+
+	Word_t TxFIFO;
+	Word_t TxFIFOPtrs;
+	Word_t RxFIFO;
+	Word_t RxFIFOPtrs;
+	Word_t TxPrioCnt;
+	Word_t TxPrioPtr;
+	Word_t TxPrioBuf;
+
+	Byte_t R[RREGDATASIZE];
+
+	Byte_t BaudDiv[4];
+	Byte_t TxControl[4];
+	Byte_t RxControl[4];
+	Byte_t TxEnables[4];
+	Byte_t TxCompare[4];
+	Byte_t TxReplace1[4];
+	Byte_t TxReplace2[4];
+} CHANNEL_T;
+
+typedef CHANNEL_T CHANNEL_t;
+typedef CHANNEL_T *CHANPTR_T;
+
+#define InterfaceModeRS232  0x00
+#define InterfaceModeRS422  0x08
+#define InterfaceModeRS485  0x10
+#define InterfaceModeRS232T 0x18
+
+/***************************************************************************
+Function: sClrBreak
+Purpose:  Stop sending a transmit BREAK signal
+Call:     sClrBreak(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sClrBreak(ChP) \
+do { \
+   (ChP)->TxControl[3] &= ~SETBREAK; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sClrDTR
+Purpose:  Clr the DTR output
+Call:     sClrDTR(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sClrDTR(ChP) \
+do { \
+   (ChP)->TxControl[3] &= ~SET_DTR; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sClrRTS
+Purpose:  Clr the RTS output
+Call:     sClrRTS(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sClrRTS(ChP) \
+do { \
+   if ((ChP)->rtsToggle) break; \
+   (ChP)->TxControl[3] &= ~SET_RTS; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sClrTxXOFF
+Purpose:  Clear any existing transmit software flow control off condition
+Call:     sClrTxXOFF(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sClrTxXOFF(ChP) \
+do { \
+   sOutB((ChP)->Cmd,TXOVERIDE | (Byte_t)(ChP)->ChanNum); \
+   sOutB((ChP)->Cmd,(Byte_t)(ChP)->ChanNum); \
+} while (0)
+
+/***************************************************************************
+Function: sCtlNumToCtlPtr
+Purpose:  Convert a controller number to controller structure pointer
+Call:     sCtlNumToCtlPtr(CtlNum)
+          int CtlNum; Controller number
+Return:   CONTROLLER_T *: Ptr to controller structure
+*/
+#define sCtlNumToCtlPtr(CTLNUM) &sController[CTLNUM]
+
+/***************************************************************************
+Function: sControllerEOI
+Purpose:  Strobe the MUDBAC's End Of Interrupt bit.
+Call:     sControllerEOI(CtlP)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+*/
+#define sControllerEOI(CTLP) sOutB((CTLP)->MReg2IO,(CTLP)->MReg2 | INT_STROB)
+
+/***************************************************************************
+Function: sPCIControllerEOI
+Purpose:  Strobe the PCI End Of Interrupt bit.
+          For the UPCI boards, toggle the AIOP interrupt enable bit
+	  (this was taken from the Windows driver).
+Call:     sPCIControllerEOI(CtlP)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+*/
+#define sPCIControllerEOI(CTLP) \
+do { \
+    if ((CTLP)->isUPCI) { \
+	Word_t w = sInW((CTLP)->PCIIO); \
+	sOutW((CTLP)->PCIIO, (w ^ PCI_INT_CTRL_AIOP)); \
+	sOutW((CTLP)->PCIIO, w); \
+    } \
+    else { \
+	sOutW((CTLP)->PCIIO, PCI_STROB); \
+    } \
+} while (0)
+
+/***************************************************************************
+Function: sDisAiop
+Purpose:  Disable I/O access to an AIOP
+Call:     sDisAiop(CltP)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          int AiopNum; Number of AIOP on controller
+*/
+#define sDisAiop(CTLP,AIOPNUM) \
+do { \
+   (CTLP)->MReg3 &= sBitMapClrTbl[AIOPNUM]; \
+   sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \
+} while (0)
+
+/***************************************************************************
+Function: sDisCTSFlowCtl
+Purpose:  Disable output flow control using CTS
+Call:     sDisCTSFlowCtl(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sDisCTSFlowCtl(ChP) \
+do { \
+   (ChP)->TxControl[2] &= ~CTSFC_EN; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sDisIXANY
+Purpose:  Disable IXANY Software Flow Control
+Call:     sDisIXANY(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sDisIXANY(ChP) \
+do { \
+   (ChP)->R[0x0e] = 0x86; \
+   out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \
+} while (0)
+
+/***************************************************************************
+Function: DisParity
+Purpose:  Disable parity
+Call:     sDisParity(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Comments: Function sSetParity() can be used in place of functions sEnParity(),
+          sDisParity(), sSetOddParity(), and sSetEvenParity().
+*/
+#define sDisParity(ChP) \
+do { \
+   (ChP)->TxControl[2] &= ~PARITY_EN; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sDisRTSToggle
+Purpose:  Disable RTS toggle
+Call:     sDisRTSToggle(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sDisRTSToggle(ChP) \
+do { \
+   (ChP)->TxControl[2] &= ~RTSTOG_EN; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+   (ChP)->rtsToggle = 0; \
+} while (0)
+
+/***************************************************************************
+Function: sDisRxFIFO
+Purpose:  Disable Rx FIFO
+Call:     sDisRxFIFO(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sDisRxFIFO(ChP) \
+do { \
+   (ChP)->R[0x32] = 0x0a; \
+   out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \
+} while (0)
+
+/***************************************************************************
+Function: sDisRxStatusMode
+Purpose:  Disable the Rx status mode
+Call:     sDisRxStatusMode(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Comments: This takes the channel out of the receive status mode.  All
+          subsequent reads of receive data using sReadRxWord() will return
+          two data bytes.
+*/
+#define sDisRxStatusMode(ChP) sOutW((ChP)->ChanStat,0)
+
+/***************************************************************************
+Function: sDisTransmit
+Purpose:  Disable transmit
+Call:     sDisTransmit(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+          This disables movement of Tx data from the Tx FIFO into the 1 byte
+          Tx buffer.  Therefore there could be up to a 2 byte latency
+          between the time sDisTransmit() is called and the transmit buffer
+          and transmit shift register going completely empty.
+*/
+#define sDisTransmit(ChP) \
+do { \
+   (ChP)->TxControl[3] &= ~TX_ENABLE; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sDisTxSoftFlowCtl
+Purpose:  Disable Tx Software Flow Control
+Call:     sDisTxSoftFlowCtl(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sDisTxSoftFlowCtl(ChP) \
+do { \
+   (ChP)->R[0x06] = 0x8a; \
+   out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
+} while (0)
+
+/***************************************************************************
+Function: sEnAiop
+Purpose:  Enable I/O access to an AIOP
+Call:     sEnAiop(CltP)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          int AiopNum; Number of AIOP on controller
+*/
+#define sEnAiop(CTLP,AIOPNUM) \
+do { \
+   (CTLP)->MReg3 |= sBitMapSetTbl[AIOPNUM]; \
+   sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \
+} while (0)
+
+/***************************************************************************
+Function: sEnCTSFlowCtl
+Purpose:  Enable output flow control using CTS
+Call:     sEnCTSFlowCtl(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sEnCTSFlowCtl(ChP) \
+do { \
+   (ChP)->TxControl[2] |= CTSFC_EN; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sEnIXANY
+Purpose:  Enable IXANY Software Flow Control
+Call:     sEnIXANY(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sEnIXANY(ChP) \
+do { \
+   (ChP)->R[0x0e] = 0x21; \
+   out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \
+} while (0)
+
+/***************************************************************************
+Function: EnParity
+Purpose:  Enable parity
+Call:     sEnParity(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Comments: Function sSetParity() can be used in place of functions sEnParity(),
+          sDisParity(), sSetOddParity(), and sSetEvenParity().
+
+Warnings: Before enabling parity odd or even parity should be chosen using
+          functions sSetOddParity() or sSetEvenParity().
+*/
+#define sEnParity(ChP) \
+do { \
+   (ChP)->TxControl[2] |= PARITY_EN; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sEnRTSToggle
+Purpose:  Enable RTS toggle
+Call:     sEnRTSToggle(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Comments: This function will disable RTS flow control and clear the RTS
+          line to allow operation of RTS toggle.
+*/
+#define sEnRTSToggle(ChP) \
+do { \
+   (ChP)->RxControl[2] &= ~RTSFC_EN; \
+   out32((ChP)->IndexAddr,(ChP)->RxControl); \
+   (ChP)->TxControl[2] |= RTSTOG_EN; \
+   (ChP)->TxControl[3] &= ~SET_RTS; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+   (ChP)->rtsToggle = 1; \
+} while (0)
+
+/***************************************************************************
+Function: sEnRxFIFO
+Purpose:  Enable Rx FIFO
+Call:     sEnRxFIFO(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sEnRxFIFO(ChP) \
+do { \
+   (ChP)->R[0x32] = 0x08; \
+   out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \
+} while (0)
+
+/***************************************************************************
+Function: sEnRxProcessor
+Purpose:  Enable the receive processor
+Call:     sEnRxProcessor(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Comments: This function is used to start the receive processor.  When
+          the channel is in the reset state the receive processor is not
+          running.  This is done to prevent the receive processor from
+          executing invalid microcode instructions prior to the
+          downloading of the microcode.
+
+Warnings: This function must be called after valid microcode has been
+          downloaded to the AIOP, and it must not be called before the
+          microcode has been downloaded.
+*/
+#define sEnRxProcessor(ChP) \
+do { \
+   (ChP)->RxControl[2] |= RXPROC_EN; \
+   out32((ChP)->IndexAddr,(ChP)->RxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sEnRxStatusMode
+Purpose:  Enable the Rx status mode
+Call:     sEnRxStatusMode(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Comments: This places the channel in the receive status mode.  All subsequent
+          reads of receive data using sReadRxWord() will return a data byte
+          in the low word and a status byte in the high word.
+
+*/
+#define sEnRxStatusMode(ChP) sOutW((ChP)->ChanStat,STATMODE)
+
+/***************************************************************************
+Function: sEnTransmit
+Purpose:  Enable transmit
+Call:     sEnTransmit(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sEnTransmit(ChP) \
+do { \
+   (ChP)->TxControl[3] |= TX_ENABLE; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sEnTxSoftFlowCtl
+Purpose:  Enable Tx Software Flow Control
+Call:     sEnTxSoftFlowCtl(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sEnTxSoftFlowCtl(ChP) \
+do { \
+   (ChP)->R[0x06] = 0xc5; \
+   out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
+} while (0)
+
+/***************************************************************************
+Function: sGetAiopIntStatus
+Purpose:  Get the AIOP interrupt status
+Call:     sGetAiopIntStatus(CtlP,AiopNum)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          int AiopNum; AIOP number
+Return:   Byte_t: The AIOP interrupt status.  Bits 0 through 7
+                         represent channels 0 through 7 respectively.  If a
+                         bit is set that channel is interrupting.
+*/
+#define sGetAiopIntStatus(CTLP,AIOPNUM) sInB((CTLP)->AiopIntChanIO[AIOPNUM])
+
+/***************************************************************************
+Function: sGetAiopNumChan
+Purpose:  Get the number of channels supported by an AIOP
+Call:     sGetAiopNumChan(CtlP,AiopNum)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+          int AiopNum; AIOP number
+Return:   int: The number of channels supported by the AIOP
+*/
+#define sGetAiopNumChan(CTLP,AIOPNUM) (CTLP)->AiopNumChan[AIOPNUM]
+
+/***************************************************************************
+Function: sGetChanIntID
+Purpose:  Get a channel's interrupt identification byte
+Call:     sGetChanIntID(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Return:   Byte_t: The channel interrupt ID.  Can be any
+             combination of the following flags:
+                RXF_TRIG:     Rx FIFO trigger level interrupt
+                TXFIFO_MT:    Tx FIFO empty interrupt
+                SRC_INT:      Special receive condition interrupt
+                DELTA_CD:     CD change interrupt
+                DELTA_CTS:    CTS change interrupt
+                DELTA_DSR:    DSR change interrupt
+*/
+#define sGetChanIntID(ChP) (sInB((ChP)->IntID) & (RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR))
+
+/***************************************************************************
+Function: sGetChanNum
+Purpose:  Get the number of a channel within an AIOP
+Call:     sGetChanNum(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Return:   int: Channel number within AIOP, or NULLCHAN if channel does
+               not exist.
+*/
+#define sGetChanNum(ChP) (ChP)->ChanNum
+
+/***************************************************************************
+Function: sGetChanStatus
+Purpose:  Get the channel status
+Call:     sGetChanStatus(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Return:   Word_t: The channel status.  Can be any combination of
+             the following flags:
+                LOW BYTE FLAGS
+                CTS_ACT:      CTS input asserted
+                DSR_ACT:      DSR input asserted
+                CD_ACT:       CD input asserted
+                TXFIFOMT:     Tx FIFO is empty
+                TXSHRMT:      Tx shift register is empty
+                RDA:          Rx data available
+
+                HIGH BYTE FLAGS
+                STATMODE:     status mode enable bit
+                RXFOVERFL:    receive FIFO overflow
+                RX2MATCH:     receive compare byte 2 match
+                RX1MATCH:     receive compare byte 1 match
+                RXBREAK:      received BREAK
+                RXFRAME:      received framing error
+                RXPARITY:     received parity error
+Warnings: This function will clear the high byte flags in the Channel
+          Status Register.
+*/
+#define sGetChanStatus(ChP) sInW((ChP)->ChanStat)
+
+/***************************************************************************
+Function: sGetChanStatusLo
+Purpose:  Get the low byte only of the channel status
+Call:     sGetChanStatusLo(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Return:   Byte_t: The channel status low byte.  Can be any combination
+             of the following flags:
+                CTS_ACT:      CTS input asserted
+                DSR_ACT:      DSR input asserted
+                CD_ACT:       CD input asserted
+                TXFIFOMT:     Tx FIFO is empty
+                TXSHRMT:      Tx shift register is empty
+                RDA:          Rx data available
+*/
+#define sGetChanStatusLo(ChP) sInB((ByteIO_t)(ChP)->ChanStat)
+
+/**********************************************************************
+ * Get RI status of channel
+ * Defined as a function in rocket.c   -aes
+ */
+#if 0
+#define sGetChanRI(ChP) ((ChP)->CtlP->AltChanRingIndicator ? \
+                          (sInB((ByteIO_t)((ChP)->ChanStat+8)) & DSR_ACT) : \
+                            (((ChP)->CtlP->boardType == ROCKET_TYPE_PC104) ? \
+                               (!(sInB((ChP)->CtlP->AiopIO[3]) & sBitMapSetTbl[(ChP)->ChanNum])) : \
+                             0))
+#endif
+
+/***************************************************************************
+Function: sGetControllerIntStatus
+Purpose:  Get the controller interrupt status
+Call:     sGetControllerIntStatus(CtlP)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+Return:   Byte_t: The controller interrupt status in the lower 4
+                         bits.  Bits 0 through 3 represent AIOP's 0
+                         through 3 respectively.  If a bit is set that
+                         AIOP is interrupting.  Bits 4 through 7 will
+                         always be cleared.
+*/
+#define sGetControllerIntStatus(CTLP) (sInB((CTLP)->MReg1IO) & 0x0f)
+
+/***************************************************************************
+Function: sPCIGetControllerIntStatus
+Purpose:  Get the controller interrupt status
+Call:     sPCIGetControllerIntStatus(CtlP)
+          CONTROLLER_T *CtlP; Ptr to controller structure
+Return:   unsigned char: The controller interrupt status in the lower 4
+                         bits and bit 4.  Bits 0 through 3 represent AIOP's 0
+                         through 3 respectively. Bit 4 is set if the int 
+			 was generated from periodic. If a bit is set the
+			 AIOP is interrupting.
+*/
+#define sPCIGetControllerIntStatus(CTLP) \
+	((CTLP)->isUPCI ? \
+	  (sInW((CTLP)->PCIIO2) & UPCI_AIOP_INTR_BITS) : \
+	  ((sInW((CTLP)->PCIIO) >> 8) & AIOP_INTR_BITS))
+
+/***************************************************************************
+
+Function: sGetRxCnt
+Purpose:  Get the number of data bytes in the Rx FIFO
+Call:     sGetRxCnt(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Return:   int: The number of data bytes in the Rx FIFO.
+Comments: Byte read of count register is required to obtain Rx count.
+
+*/
+#define sGetRxCnt(ChP) sInW((ChP)->TxRxCount)
+
+/***************************************************************************
+Function: sGetTxCnt
+Purpose:  Get the number of data bytes in the Tx FIFO
+Call:     sGetTxCnt(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Return:   Byte_t: The number of data bytes in the Tx FIFO.
+Comments: Byte read of count register is required to obtain Tx count.
+
+*/
+#define sGetTxCnt(ChP) sInB((ByteIO_t)(ChP)->TxRxCount)
+
+/*****************************************************************************
+Function: sGetTxRxDataIO
+Purpose:  Get the I/O address of a channel's TxRx Data register
+Call:     sGetTxRxDataIO(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Return:   WordIO_t: I/O address of a channel's TxRx Data register
+*/
+#define sGetTxRxDataIO(ChP) (ChP)->TxRxData
+
+/***************************************************************************
+Function: sInitChanDefaults
+Purpose:  Initialize a channel structure to it's default state.
+Call:     sInitChanDefaults(ChP)
+          CHANNEL_T *ChP; Ptr to the channel structure
+Comments: This function must be called once for every channel structure
+          that exists before any other SSCI calls can be made.
+
+*/
+#define sInitChanDefaults(ChP) \
+do { \
+   (ChP)->CtlP = NULLCTLPTR; \
+   (ChP)->AiopNum = NULLAIOP; \
+   (ChP)->ChanID = AIOPID_NULL; \
+   (ChP)->ChanNum = NULLCHAN; \
+} while (0)
+
+/***************************************************************************
+Function: sResetAiopByNum
+Purpose:  Reset the AIOP by number
+Call:     sResetAiopByNum(CTLP,AIOPNUM)
+	CONTROLLER_T CTLP; Ptr to controller structure
+	AIOPNUM; AIOP index 
+*/
+#define sResetAiopByNum(CTLP,AIOPNUM) \
+do { \
+   sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,RESET_ALL); \
+   sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,0x0); \
+} while (0)
+
+/***************************************************************************
+Function: sSendBreak
+Purpose:  Send a transmit BREAK signal
+Call:     sSendBreak(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sSendBreak(ChP) \
+do { \
+   (ChP)->TxControl[3] |= SETBREAK; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sSetBaud
+Purpose:  Set baud rate
+Call:     sSetBaud(ChP,Divisor)
+          CHANNEL_T *ChP; Ptr to channel structure
+          Word_t Divisor; 16 bit baud rate divisor for channel
+*/
+#define sSetBaud(ChP,DIVISOR) \
+do { \
+   (ChP)->BaudDiv[2] = (Byte_t)(DIVISOR); \
+   (ChP)->BaudDiv[3] = (Byte_t)((DIVISOR) >> 8); \
+   out32((ChP)->IndexAddr,(ChP)->BaudDiv); \
+} while (0)
+
+/***************************************************************************
+Function: sSetData7
+Purpose:  Set data bits to 7
+Call:     sSetData7(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sSetData7(ChP) \
+do { \
+   (ChP)->TxControl[2] &= ~DATA8BIT; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sSetData8
+Purpose:  Set data bits to 8
+Call:     sSetData8(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sSetData8(ChP) \
+do { \
+   (ChP)->TxControl[2] |= DATA8BIT; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sSetDTR
+Purpose:  Set the DTR output
+Call:     sSetDTR(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sSetDTR(ChP) \
+do { \
+   (ChP)->TxControl[3] |= SET_DTR; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sSetEvenParity
+Purpose:  Set even parity
+Call:     sSetEvenParity(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Comments: Function sSetParity() can be used in place of functions sEnParity(),
+          sDisParity(), sSetOddParity(), and sSetEvenParity().
+
+Warnings: This function has no effect unless parity is enabled with function
+          sEnParity().
+*/
+#define sSetEvenParity(ChP) \
+do { \
+   (ChP)->TxControl[2] |= EVEN_PAR; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sSetOddParity
+Purpose:  Set odd parity
+Call:     sSetOddParity(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Comments: Function sSetParity() can be used in place of functions sEnParity(),
+          sDisParity(), sSetOddParity(), and sSetEvenParity().
+
+Warnings: This function has no effect unless parity is enabled with function
+          sEnParity().
+*/
+#define sSetOddParity(ChP) \
+do { \
+   (ChP)->TxControl[2] &= ~EVEN_PAR; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sSetRTS
+Purpose:  Set the RTS output
+Call:     sSetRTS(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sSetRTS(ChP) \
+do { \
+   if ((ChP)->rtsToggle) break; \
+   (ChP)->TxControl[3] |= SET_RTS; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sSetRxTrigger
+Purpose:  Set the Rx FIFO trigger level
+Call:     sSetRxProcessor(ChP,Level)
+          CHANNEL_T *ChP; Ptr to channel structure
+          Byte_t Level; Number of characters in Rx FIFO at which the
+             interrupt will be generated.  Can be any of the following flags:
+
+             TRIG_NO:   no trigger
+             TRIG_1:    1 character in FIFO
+             TRIG_1_2:  FIFO 1/2 full
+             TRIG_7_8:  FIFO 7/8 full
+Comments: An interrupt will be generated when the trigger level is reached
+          only if function sEnInterrupt() has been called with flag
+          RXINT_EN set.  The RXF_TRIG flag in the Interrupt Idenfification
+          register will be set whenever the trigger level is reached
+          regardless of the setting of RXINT_EN.
+
+*/
+#define sSetRxTrigger(ChP,LEVEL) \
+do { \
+   (ChP)->RxControl[2] &= ~TRIG_MASK; \
+   (ChP)->RxControl[2] |= LEVEL; \
+   out32((ChP)->IndexAddr,(ChP)->RxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sSetStop1
+Purpose:  Set stop bits to 1
+Call:     sSetStop1(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sSetStop1(ChP) \
+do { \
+   (ChP)->TxControl[2] &= ~STOP2; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sSetStop2
+Purpose:  Set stop bits to 2
+Call:     sSetStop2(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+*/
+#define sSetStop2(ChP) \
+do { \
+   (ChP)->TxControl[2] |= STOP2; \
+   out32((ChP)->IndexAddr,(ChP)->TxControl); \
+} while (0)
+
+/***************************************************************************
+Function: sSetTxXOFFChar
+Purpose:  Set the Tx XOFF flow control character
+Call:     sSetTxXOFFChar(ChP,Ch)
+          CHANNEL_T *ChP; Ptr to channel structure
+          Byte_t Ch; The value to set the Tx XOFF character to
+*/
+#define sSetTxXOFFChar(ChP,CH) \
+do { \
+   (ChP)->R[0x07] = (CH); \
+   out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
+} while (0)
+
+/***************************************************************************
+Function: sSetTxXONChar
+Purpose:  Set the Tx XON flow control character
+Call:     sSetTxXONChar(ChP,Ch)
+          CHANNEL_T *ChP; Ptr to channel structure
+          Byte_t Ch; The value to set the Tx XON character to
+*/
+#define sSetTxXONChar(ChP,CH) \
+do { \
+   (ChP)->R[0x0b] = (CH); \
+   out32((ChP)->IndexAddr,&(ChP)->R[0x08]); \
+} while (0)
+
+/***************************************************************************
+Function: sStartRxProcessor
+Purpose:  Start a channel's receive processor
+Call:     sStartRxProcessor(ChP)
+          CHANNEL_T *ChP; Ptr to channel structure
+Comments: This function is used to start a Rx processor after it was
+          stopped with sStopRxProcessor() or sStopSWInFlowCtl().  It
+          will restart both the Rx processor and software input flow control.
+
+*/
+#define sStartRxProcessor(ChP) out32((ChP)->IndexAddr,&(ChP)->R[0])
+
+/***************************************************************************
+Function: sWriteTxByte
+Purpose:  Write a transmit data byte to a channel.
+          ByteIO_t io: Channel transmit register I/O address.  This can
+                           be obtained with sGetTxRxDataIO().
+          Byte_t Data; The transmit data byte.
+Warnings: This function writes the data byte without checking to see if
+          sMaxTxSize is exceeded in the Tx FIFO.
+*/
+#define sWriteTxByte(IO,DATA) sOutB(IO,DATA)
+
+/*
+ * Begin Linux specific definitions for the Rocketport driver
+ *
+ * This code is Copyright Theodore Ts'o, 1995-1997
+ */
+
+struct r_port {
+	int magic;
+	struct tty_port port;
+	int line;
+	int flags;		/* Don't yet match the ASY_ flags!! */
+	unsigned int board:3;
+	unsigned int aiop:2;
+	unsigned int chan:3;
+	CONTROLLER_t *ctlp;
+	CHANNEL_t channel;
+	int intmask;
+	int xmit_fifo_room;	/* room in xmit fifo */
+	unsigned char *xmit_buf;
+	int xmit_head;
+	int xmit_tail;
+	int xmit_cnt;
+	int cd_status;
+	int ignore_status_mask;
+	int read_status_mask;
+	int cps;
+
+	struct completion close_wait;	/* Not yet matching the core */
+	spinlock_t slock;
+	struct mutex write_mtx;
+};
+
+#define RPORT_MAGIC 0x525001
+
+#define NUM_BOARDS 8
+#define MAX_RP_PORTS (32*NUM_BOARDS)
+
+/*
+ * The size of the xmit buffer is 1 page, or 4096 bytes
+ */
+#define XMIT_BUF_SIZE 4096
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+/*
+ * Assigned major numbers for the Comtrol Rocketport
+ */
+#define TTY_ROCKET_MAJOR	46
+#define CUA_ROCKET_MAJOR	47
+
+#ifdef PCI_VENDOR_ID_RP
+#undef PCI_VENDOR_ID_RP
+#undef PCI_DEVICE_ID_RP8OCTA
+#undef PCI_DEVICE_ID_RP8INTF
+#undef PCI_DEVICE_ID_RP16INTF
+#undef PCI_DEVICE_ID_RP32INTF
+#undef PCI_DEVICE_ID_URP8OCTA
+#undef PCI_DEVICE_ID_URP8INTF
+#undef PCI_DEVICE_ID_URP16INTF
+#undef PCI_DEVICE_ID_CRP16INTF
+#undef PCI_DEVICE_ID_URP32INTF
+#endif
+
+/*  Comtrol PCI Vendor ID */
+#define PCI_VENDOR_ID_RP		0x11fe
+
+/*  Comtrol Device ID's */
+#define PCI_DEVICE_ID_RP32INTF		0x0001	/* Rocketport 32 port w/external I/F     */
+#define PCI_DEVICE_ID_RP8INTF		0x0002	/* Rocketport 8 port w/external I/F      */
+#define PCI_DEVICE_ID_RP16INTF		0x0003	/* Rocketport 16 port w/external I/F     */
+#define PCI_DEVICE_ID_RP4QUAD		0x0004	/* Rocketport 4 port w/quad cable        */
+#define PCI_DEVICE_ID_RP8OCTA		0x0005	/* Rocketport 8 port w/octa cable        */
+#define PCI_DEVICE_ID_RP8J		0x0006	/* Rocketport 8 port w/RJ11 connectors   */
+#define PCI_DEVICE_ID_RP4J		0x0007	/* Rocketport 4 port w/RJ11 connectors   */
+#define PCI_DEVICE_ID_RP8SNI		0x0008	/* Rocketport 8 port w/ DB78 SNI (Siemens) connector */
+#define PCI_DEVICE_ID_RP16SNI		0x0009	/* Rocketport 16 port w/ DB78 SNI (Siemens) connector   */
+#define PCI_DEVICE_ID_RPP4		0x000A	/* Rocketport Plus 4 port                */
+#define PCI_DEVICE_ID_RPP8		0x000B	/* Rocketport Plus 8 port                */
+#define PCI_DEVICE_ID_RP6M		0x000C	/* RocketModem 6 port                    */
+#define PCI_DEVICE_ID_RP4M		0x000D	/* RocketModem 4 port                    */
+#define PCI_DEVICE_ID_RP2_232           0x000E	/* Rocketport Plus 2 port RS232          */
+#define PCI_DEVICE_ID_RP2_422           0x000F	/* Rocketport Plus 2 port RS422          */ 
+
+/* Universal PCI boards  */
+#define PCI_DEVICE_ID_URP32INTF		0x0801	/* Rocketport UPCI 32 port w/external I/F */ 
+#define PCI_DEVICE_ID_URP8INTF		0x0802	/* Rocketport UPCI 8 port w/external I/F  */
+#define PCI_DEVICE_ID_URP16INTF		0x0803	/* Rocketport UPCI 16 port w/external I/F */
+#define PCI_DEVICE_ID_URP8OCTA		0x0805	/* Rocketport UPCI 8 port w/octa cable    */
+#define PCI_DEVICE_ID_UPCI_RM3_8PORT    0x080C	/* Rocketmodem III 8 port                 */
+#define PCI_DEVICE_ID_UPCI_RM3_4PORT    0x080D	/* Rocketmodem III 4 port                 */
+
+/* Compact PCI device */ 
+#define PCI_DEVICE_ID_CRP16INTF		0x0903	/* Rocketport Compact PCI 16 port w/external I/F */
+
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index be0ebce36e54..d5bfd41707e7 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -262,7 +262,7 @@ static void status_handle(struct m68k_serial *info, unsigned short status)
 
 static void receive_chars(struct m68k_serial *info, unsigned short rx)
 {
-	struct tty_struct *tty = info->port.tty;
+	struct tty_struct *tty = info->tty;
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned char ch, flag;
 
@@ -329,7 +329,7 @@ static void transmit_chars(struct m68k_serial *info)
 		goto clear_and_return;
 	}
 
-	if((info->xmit_cnt <= 0) || info->port.tty->stopped) {
+	if((info->xmit_cnt <= 0) || info->tty->stopped) {
 		/* That's peculiar... TX ints off */
 		uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
 		goto clear_and_return;
@@ -383,7 +383,7 @@ static void do_softint(struct work_struct *work)
 	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue);
 	struct tty_struct	*tty;
 	
-	tty = info->port.tty;
+	tty = info->tty;
 	if (!tty)
 		return;
 #if 0
@@ -393,28 +393,6 @@ static void do_softint(struct work_struct *work)
 #endif   
 }
 
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred.  The path of
- * hangup processing is:
- *
- * 	serial interrupt routine -> (scheduler tqueue) ->
- * 	do_serial_hangup() -> tty->hangup() -> rs_hangup()
- * 
- */
-static void do_serial_hangup(struct work_struct *work)
-{
-	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue_hangup);
-	struct tty_struct	*tty;
-	
-	tty = info->port.tty;
-	if (!tty)
-		return;
-
-	tty_hangup(tty);
-}
-
-
 static int startup(struct m68k_serial * info)
 {
 	m68328_uart *uart = &uart_addr[info->line];
@@ -451,8 +429,8 @@ static int startup(struct m68k_serial * info)
 	uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
 #endif
 
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	if (info->tty)
+		clear_bit(TTY_IO_ERROR, &info->tty->flags);
 	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 
 	/*
@@ -486,8 +464,8 @@ static void shutdown(struct m68k_serial * info)
 		info->xmit_buf = 0;
 	}
 
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	if (info->tty)
+		set_bit(TTY_IO_ERROR, &info->tty->flags);
 	
 	info->flags &= ~S_INITIALIZED;
 	local_irq_restore(flags);
@@ -553,9 +531,9 @@ static void change_speed(struct m68k_serial *info)
 	unsigned cflag;
 	int	i;
 
-	if (!info->port.tty || !info->port.tty->termios)
+	if (!info->tty || !info->tty->termios)
 		return;
-	cflag = info->port.tty->termios->c_cflag;
+	cflag = info->tty->termios->c_cflag;
 	if (!(port = info->port))
 		return;
 
@@ -967,10 +945,9 @@ static void send_break(struct m68k_serial * info, unsigned int duration)
         local_irq_restore(flags);
 }
 
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
-	int error;
 	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
 	int retval;
 
@@ -1104,7 +1081,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	tty_ldisc_flush(tty);
 	tty->closing = 0;
 	info->event = 0;
-	info->port.tty = NULL;
+	info->tty = NULL;
 #warning "This is not and has never been valid so fix it"	
 #if 0
 	if (tty->ldisc.num != ldiscs[N_TTY].num) {
@@ -1142,7 +1119,7 @@ void rs_hangup(struct tty_struct *tty)
 	info->event = 0;
 	info->count = 0;
 	info->flags &= ~S_NORMAL_ACTIVE;
-	info->port.tty = NULL;
+	info->tty = NULL;
 	wake_up_interruptible(&info->open_wait);
 }
 
@@ -1261,7 +1238,7 @@ int rs_open(struct tty_struct *tty, struct file * filp)
 
 	info->count++;
 	tty->driver_data = info;
-	info->port.tty = tty;
+	info->tty = tty;
 
 	/*
 	 * Start up serial port
@@ -1338,7 +1315,7 @@ rs68328_init(void)
 	    info = &m68k_soft[i];
 	    info->magic = SERIAL_MAGIC;
 	    info->port = (int) &uart_addr[i];
-	    info->port.tty = NULL;
+	    info->tty = NULL;
 	    info->irq = uart_irqs[i];
 	    info->custom_divisor = 16;
 	    info->close_delay = 50;
@@ -1348,7 +1325,6 @@ rs68328_init(void)
 	    info->count = 0;
 	    info->blocked_open = 0;
 	    INIT_WORK(&info->tqueue, do_softint);
-	    INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
 	    init_waitqueue_head(&info->open_wait);
 	    init_waitqueue_head(&info->close_wait);
 	    info->line = i;
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
index 664ceb0a158c..8c9c3c0745db 100644
--- a/drivers/tty/serial/68328serial.h
+++ b/drivers/tty/serial/68328serial.h
@@ -159,7 +159,6 @@ struct m68k_serial {
 	int			xmit_tail;
 	int			xmit_cnt;
 	struct work_struct	tqueue;
-	struct work_struct	tqueue_hangup;
 	wait_queue_head_t	open_wait;
 	wait_queue_head_t	close_wait;
 };
diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c
index bc21eeae8fde..0a3e8787ed50 100644
--- a/drivers/tty/serial/68360serial.c
+++ b/drivers/tty/serial/68360serial.c
@@ -1240,7 +1240,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int *value)
 }
 #endif
 
-static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
+static int rs_360_tiocmget(struct tty_struct *tty)
 {
 	ser_info_t *info = (ser_info_t *)tty->driver_data;
 	unsigned int result = 0;
@@ -1271,7 +1271,7 @@ static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int rs_360_tiocmset(struct tty_struct *tty, struct file *file,
+static int rs_360_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 #ifdef modem_control
@@ -1405,7 +1405,7 @@ static int rs_360_get_icount(struct tty_struct *tty,
 	return 0;
 }
 
-static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_360_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	int error;
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 3975df6f7fdb..b3b881bc4712 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -954,6 +954,23 @@ static int broken_efr(struct uart_8250_port *up)
 	return 0;
 }
 
+static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
+{
+	unsigned char status;
+
+	status = serial_in(up, 0x04); /* EXCR2 */
+#define PRESL(x) ((x) & 0x30)
+	if (PRESL(status) == 0x10) {
+		/* already in high speed mode */
+		return 0;
+	} else {
+		status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+		status |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
+		serial_outp(up, 0x04, status);
+	}
+	return 1;
+}
+
 /*
  * We know that the chip has FIFOs.  Does it have an EFR?  The
  * EFR is located in the same register position as the IIR and
@@ -1025,12 +1042,8 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 			quot = serial_dl_read(up);
 			quot <<= 3;
 
-			status1 = serial_in(up, 0x04); /* EXCR2 */
-			status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
-			status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
-			serial_outp(up, 0x04, status1);
-
-			serial_dl_write(up, quot);
+			if (ns16550a_goto_highspeed(up))
+				serial_dl_write(up, quot);
 
 			serial_outp(up, UART_LCR, 0);
 
@@ -3025,17 +3038,13 @@ void serial8250_resume_port(int line)
 	struct uart_8250_port *up = &serial8250_ports[line];
 
 	if (up->capabilities & UART_NATSEMI) {
-		unsigned char tmp;
-
 		/* Ensure it's still in high speed mode */
 		serial_outp(up, UART_LCR, 0xE0);
 
-		tmp = serial_in(up, 0x04); /* EXCR2 */
-		tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
-		tmp |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
-		serial_outp(up, 0x04, tmp);
+		ns16550a_goto_highspeed(up);
 
 		serial_outp(up, UART_LCR, 0);
+		up->port.uartclk = 921600*16;
 	}
 	uart_resume_port(&serial8250_reg, &up->port);
 }
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2b8334601c8b..e461be164f67 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1110,29 +1110,6 @@ config SERIAL_PMACZILOG_CONSOLE
 	  on your (Power)Mac as the console, you can do so by answering
 	  Y to this option.
 
-config SERIAL_LH7A40X
-	tristate "Sharp LH7A40X embedded UART support"
-	depends on ARM && ARCH_LH7A40X
-	select SERIAL_CORE
-	help
-	  This enables support for the three on-board UARTs of the
-	  Sharp LH7A40X series CPUs.  Choose Y or M.
-
-config SERIAL_LH7A40X_CONSOLE
-	bool "Support for console on Sharp LH7A40X serial port"
-	depends on SERIAL_LH7A40X=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you wish to use one of the serial ports as the
-	  system console--the system console is the device which
-	  receives all kernel messages and warnings and which allows
-	  logins in single user mode.
-
-	  Even if you say Y here, the currently visible framebuffer console
-	  (/dev/tty0) will still be used as the default system console, but
-	  you can alter that using a kernel command line, for example
-	  "console=ttyAM1".
-
 config SERIAL_CPM
 	tristate "CPM SCC/SMC serial port support"
 	depends on CPM2 || 8xx
@@ -1319,6 +1296,18 @@ config SERIAL_MSM_CONSOLE
 	depends on SERIAL_MSM=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_MSM_HS
+	tristate "MSM UART High Speed: Serial Driver"
+	depends on ARCH_MSM
+	select SERIAL_CORE
+	help
+	  If you have a machine based on MSM family of SoCs, you
+	  can enable its onboard high speed serial port by enabling
+	  this option.
+
+	  Choose M here to compile it as a module. The module will be
+	  called msm_serial_hs.
+
 config SERIAL_VT8500
 	bool "VIA VT8500 on-chip serial port support"
 	depends on ARM && ARCH_VT8500
@@ -1588,12 +1577,25 @@ config SERIAL_IFX6X60
 	  Support for the IFX6x60 modem devices on Intel MID platforms.
 
 config SERIAL_PCH_UART
-	tristate "Intel EG20T PCH UART"
-	depends on PCI && DMADEVICES
+	tristate "Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
+	depends on PCI
 	select SERIAL_CORE
-	select PCH_DMA
 	help
 	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  Enabling PCH_DMA, this PCH UART works as DMA mode.
+
+	  This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
+	  Output Hub) which is for IVI(In-Vehicle Infotainment) use.
+	  ML7213 is companion chip for Intel Atom E6xx series.
+	  ML7213 is completely compatible for Intel EG20T PCH.
+
+config SERIAL_MSM_SMD
+	bool "Enable tty device interface for some SMD ports"
+	default n
+	depends on MSM_SMD
+	help
+	  Enables userspace clients to read and write to some streaming SMD
+	  ports via tty device interface for MSM chipset.
+
 endmenu
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 8ea92e9c73b0..31e868cb49b2 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
-obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
 obj-$(CONFIG_SERIAL_ZS) += zs.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
@@ -76,6 +75,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
 obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
+obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
@@ -92,3 +92,4 @@ obj-$(CONFIG_SERIAL_MRST_MAX3110)	+= mrst_max3110.o
 obj-$(CONFIG_SERIAL_MFD_HSU)	+= mfd.o
 obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
+obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index f9b49b5ff5e1..60e049b041a7 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -305,28 +305,6 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS];
 
 #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE)
 
-int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart
-				       *platp)
-{
-	struct uart_port *port;
-	int i;
-
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
-		port = &altera_jtaguart_ports[i].port;
-
-		port->line = i;
-		port->type = PORT_ALTERA_JTAGUART;
-		port->mapbase = platp[i].mapbase;
-		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
-		port->iotype = SERIAL_IO_MEM;
-		port->irq = platp[i].irq;
-		port->flags = ASYNC_BOOT_AUTOCONF;
-		port->ops = &altera_jtaguart_ops;
-	}
-
-	return 0;
-}
-
 #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS)
 static void altera_jtaguart_console_putc(struct console *co, const char c)
 {
@@ -384,7 +362,7 @@ static int __init altera_jtaguart_console_setup(struct console *co,
 	if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS)
 		return -EINVAL;
 	port = &altera_jtaguart_ports[co->index].port;
-	if (port->membase == 0)
+	if (port->membase == NULL)
 		return -ENODEV;
 	return 0;
 }
@@ -431,22 +409,45 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
 {
 	struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data;
 	struct uart_port *port;
-	int i;
+	struct resource *res_irq, *res_mem;
+	int i = pdev->id;
 
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
-		port = &altera_jtaguart_ports[i].port;
+	/* -1 emphasizes that the platform must have one port, no .N suffix */
+	if (i == -1)
+		i = 0;
 
-		port->line = i;
-		port->type = PORT_ALTERA_JTAGUART;
-		port->mapbase = platp[i].mapbase;
-		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
-		port->iotype = SERIAL_IO_MEM;
-		port->irq = platp[i].irq;
-		port->ops = &altera_jtaguart_ops;
-		port->flags = ASYNC_BOOT_AUTOCONF;
+	if (i >= ALTERA_JTAGUART_MAXPORTS)
+		return -EINVAL;
 
-		uart_add_one_port(&altera_jtaguart_driver, port);
-	}
+	port = &altera_jtaguart_ports[i].port;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res_mem)
+		port->mapbase = res_mem->start;
+	else if (platp)
+		port->mapbase = platp->mapbase;
+	else
+		return -ENODEV;
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res_irq)
+		port->irq = res_irq->start;
+	else if (platp)
+		port->irq = platp->irq;
+	else
+		return -ENODEV;
+
+	port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
+	if (!port->membase)
+		return -ENOMEM;
+
+	port->line = i;
+	port->type = PORT_ALTERA_JTAGUART;
+	port->iotype = SERIAL_IO_MEM;
+	port->ops = &altera_jtaguart_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+
+	uart_add_one_port(&altera_jtaguart_driver, port);
 
 	return 0;
 }
@@ -454,23 +455,34 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
 static int __devexit altera_jtaguart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
-	int i;
+	int i = pdev->id;
 
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) {
-		port = &altera_jtaguart_ports[i].port;
-		if (port)
-			uart_remove_one_port(&altera_jtaguart_driver, port);
-	}
+	if (i == -1)
+		i = 0;
+
+	port = &altera_jtaguart_ports[i].port;
+	uart_remove_one_port(&altera_jtaguart_driver, port);
 
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id altera_jtaguart_match[] = {
+	{ .compatible = "ALTR,juart-1.0", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_jtaguart_match);
+#else
+#define altera_jtaguart_match NULL
+#endif /* CONFIG_OF */
+
 static struct platform_driver altera_jtaguart_platform_driver = {
 	.probe	= altera_jtaguart_probe,
 	.remove	= __devexit_p(altera_jtaguart_remove),
 	.driver	= {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= altera_jtaguart_match,
 	},
 };
 
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 721216292a50..6d5b036ac783 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -24,6 +24,7 @@
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 #include <linux/io.h>
 #include <linux/altera_uart.h>
 
@@ -86,16 +87,12 @@ struct altera_uart {
 
 static u32 altera_uart_readl(struct uart_port *port, int reg)
 {
-	struct altera_uart_platform_uart *platp = port->private_data;
-
-	return readl(port->membase + (reg << platp->bus_shift));
+	return readl(port->membase + (reg << port->regshift));
 }
 
 static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
 {
-	struct altera_uart_platform_uart *platp = port->private_data;
-
-	writel(dat, port->membase + (reg << platp->bus_shift));
+	writel(dat, port->membase + (reg << port->regshift));
 }
 
 static unsigned int altera_uart_tx_empty(struct uart_port *port)
@@ -511,6 +508,29 @@ static struct uart_driver altera_uart_driver = {
 	.cons		= ALTERA_UART_CONSOLE,
 };
 
+#ifdef CONFIG_OF
+static int altera_uart_get_of_uartclk(struct platform_device *pdev,
+				      struct uart_port *port)
+{
+	int len;
+	const __be32 *clk;
+
+	clk = of_get_property(pdev->dev.of_node, "clock-frequency", &len);
+	if (!clk || len < sizeof(__be32))
+		return -ENODEV;
+
+	port->uartclk = be32_to_cpup(clk);
+
+	return 0;
+}
+#else
+static int altera_uart_get_of_uartclk(struct platform_device *pdev,
+				      struct uart_port *port)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_OF */
+
 static int __devinit altera_uart_probe(struct platform_device *pdev)
 {
 	struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
@@ -518,6 +538,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	struct resource *res_mem;
 	struct resource *res_irq;
 	int i = pdev->id;
+	int ret;
 
 	/* -1 emphasizes that the platform must have one port, no .N suffix */
 	if (i == -1)
@@ -542,17 +563,29 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	else if (platp->irq)
 		port->irq = platp->irq;
 
+	/* Check platform data first so we can override device node data */
+	if (platp)
+		port->uartclk = platp->uartclk;
+	else {
+		ret = altera_uart_get_of_uartclk(pdev, port);
+		if (ret)
+			return ret;
+	}
+
 	port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
 	if (!port->membase)
 		return -ENOMEM;
 
+	if (platp)
+		port->regshift = platp->bus_shift;
+	else
+		port->regshift = 0;
+
 	port->line = i;
 	port->type = PORT_ALTERA_UART;
 	port->iotype = SERIAL_IO_MEM;
-	port->uartclk = platp->uartclk;
 	port->ops = &altera_uart_ops;
 	port->flags = UPF_BOOT_AUTOCONF;
-	port->private_data = platp;
 
 	uart_add_one_port(&altera_uart_driver, port);
 
@@ -561,19 +594,35 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 
 static int __devexit altera_uart_remove(struct platform_device *pdev)
 {
-	struct uart_port *port = &altera_uart_ports[pdev->id].port;
+	struct uart_port *port;
+	int i = pdev->id;
+
+	if (i == -1)
+		i = 0;
 
+	port = &altera_uart_ports[i].port;
 	uart_remove_one_port(&altera_uart_driver, port);
+
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id altera_uart_match[] = {
+	{ .compatible = "ALTR,uart-1.0", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_uart_match);
+#else
+#define altera_uart_match NULL
+#endif /* CONFIG_OF */
+
 static struct platform_driver altera_uart_platform_driver = {
 	.probe	= altera_uart_probe,
 	.remove	= __devexit_p(altera_uart_remove),
 	.driver	= {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
-		.pm	= NULL,
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= altera_uart_match,
 	},
 };
 
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 095a5d562618..1ab999b04ef3 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -553,8 +553,7 @@ static struct uart_driver grlib_apbuart_driver = {
 /* OF Platform Driver                                                       */
 /* ======================================================================== */
 
-static int __devinit apbuart_probe(struct platform_device *op,
-				   const struct of_device_id *match)
+static int __devinit apbuart_probe(struct platform_device *op)
 {
 	int i = -1;
 	struct uart_port *port = NULL;
@@ -587,7 +586,7 @@ static struct of_device_id __initdata apbuart_match[] = {
 	{},
 };
 
-static struct of_platform_driver grlib_apbuart_of_driver = {
+static struct platform_driver grlib_apbuart_of_driver = {
 	.probe = apbuart_probe,
 	.driver = {
 		.owner = THIS_MODULE,
@@ -676,10 +675,10 @@ static int __init grlib_apbuart_init(void)
 		return ret;
 	}
 
-	ret = of_register_platform_driver(&grlib_apbuart_of_driver);
+	ret = platform_driver_register(&grlib_apbuart_of_driver);
 	if (ret) {
 		printk(KERN_ERR
-		       "%s: of_register_platform_driver failed (%i)\n",
+		       "%s: platform_driver_register failed (%i)\n",
 		       __FILE__, ret);
 		uart_unregister_driver(&grlib_apbuart_driver);
 		return ret;
@@ -697,7 +696,7 @@ static void __exit grlib_apbuart_exit(void)
 				     &grlib_apbuart_ports[i]);
 
 	uart_unregister_driver(&grlib_apbuart_driver);
-	of_unregister_platform_driver(&grlib_apbuart_of_driver);
+	platform_driver_unregister(&grlib_apbuart_of_driver);
 }
 
 module_init(grlib_apbuart_init);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 2a1d52fb4936..f119d1761106 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1240,6 +1240,21 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
+static void atmel_set_ldisc(struct uart_port *port, int new)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		atmel_enable_ms(port);
+	} else {
+		port->flags &= ~UPF_HARDPPS_CD;
+	}
+}
+
 /*
  * Return string describing the specified port
  */
@@ -1380,6 +1395,7 @@ static struct uart_ops atmel_pops = {
 	.shutdown	= atmel_shutdown,
 	.flush_buffer	= atmel_flush_buffer,
 	.set_termios	= atmel_set_termios,
+	.set_ldisc	= atmel_set_ldisc,
 	.type		= atmel_type,
 	.release_port	= atmel_release_port,
 	.request_port	= atmel_request_port,
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index e95c524d9d18..c3ec0a61d859 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -788,7 +788,7 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
 		sport->port.mapbase = res->start;
 
 		sport->port.irq = platform_get_irq(pdev, 0);
-		if (sport->port.irq < 0) {
+		if ((int)sport->port.irq < 0) {
 			dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n");
 			ret = -ENOENT;
 			goto out_error_unmap;
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 8692ff98fc07..a9a6a5fd169e 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1359,8 +1359,7 @@ static struct uart_driver cpm_reg = {
 
 static int probe_index;
 
-static int __devinit cpm_uart_probe(struct platform_device *ofdev,
-                                    const struct of_device_id *match)
+static int __devinit cpm_uart_probe(struct platform_device *ofdev)
 {
 	int index = probe_index++;
 	struct uart_cpm_port *pinfo = &cpm_uart_ports[index];
@@ -1405,7 +1404,7 @@ static struct of_device_id cpm_uart_match[] = {
 	{}
 };
 
-static struct of_platform_driver cpm_uart_driver = {
+static struct platform_driver cpm_uart_driver = {
 	.driver = {
 		.name = "cpm_uart",
 		.owner = THIS_MODULE,
@@ -1421,7 +1420,7 @@ static int __init cpm_uart_init(void)
 	if (ret)
 		return ret;
 
-	ret = of_register_platform_driver(&cpm_uart_driver);
+	ret = platform_driver_register(&cpm_uart_driver);
 	if (ret)
 		uart_unregister_driver(&cpm_reg);
 
@@ -1430,7 +1429,7 @@ static int __init cpm_uart_init(void)
 
 static void __exit cpm_uart_exit(void)
 {
-	of_unregister_platform_driver(&cpm_uart_driver);
+	platform_driver_unregister(&cpm_uart_driver);
 	uart_unregister_driver(&cpm_reg);
 }
 
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index bcc31f2140ac..225123b37f19 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3581,8 +3581,7 @@ rs_break(struct tty_struct *tty, int break_state)
 }
 
 static int
-rs_tiocmset(struct tty_struct *tty, struct file *file,
-		unsigned int set, unsigned int clear)
+rs_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned long flags;
@@ -3614,7 +3613,7 @@ rs_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 static int
-rs_tiocmget(struct tty_struct *tty, struct file *file)
+rs_tiocmget(struct tty_struct *tty)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned int result;
@@ -3648,7 +3647,7 @@ rs_tiocmget(struct tty_struct *tty, struct file *file)
 
 
 static int
-rs_ioctl(struct tty_struct *tty, struct file * file,
+rs_ioctl(struct tty_struct *tty,
 	 unsigned int cmd, unsigned long arg)
 {
 	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index ab93763862d5..8ee5a41d340d 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -8,7 +8,7 @@
  *		      Jan Dumon <j.dumon@option.com>
  *
  * Copyright (C) 2009, 2010 Intel Corp
- * Russ Gorby <richardx.r.gorby@intel.com>
+ * Russ Gorby <russ.gorby@intel.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -67,6 +67,7 @@
 #define IFX_SPI_MORE_MASK		0x10
 #define IFX_SPI_MORE_BIT		12	/* bit position in u16 */
 #define IFX_SPI_CTS_BIT			13	/* bit position in u16 */
+#define IFX_SPI_MODE			SPI_MODE_1
 #define IFX_SPI_TTY_ID			0
 #define IFX_SPI_TIMEOUT_SEC		2
 #define IFX_SPI_HEADER_0		(-1)
@@ -76,7 +77,7 @@
 static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev);
 
 /* local variables */
-static int spi_b16 = 1;			/* 8 or 16 bit word length */
+static int spi_bpw = 16;		/* 8, 16 or 32 bit word length */
 static struct tty_driver *tty_drv;
 static struct ifx_spi_device *saved_ifx_dev;
 static struct lock_class_key ifx_spi_key;
@@ -244,7 +245,7 @@ static void ifx_spi_timeout(unsigned long arg)
  *	Map the signal state into Linux modem flags and report the value
  *	in Linux terms
  */
-static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
+static int ifx_spi_tiocmget(struct tty_struct *tty)
 {
 	unsigned int value;
 	struct ifx_spi_device *ifx_dev = tty->driver_data;
@@ -262,7 +263,6 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
 /**
  *	ifx_spi_tiocmset	-	set modem bits
  *	@tty: the tty structure
- *	@filp: file handle issuing the request
  *	@set: bits to set
  *	@clear: bits to clear
  *
@@ -271,7 +271,7 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
  *
  *	FIXME: do we need to kick the tranfers when we do this ?
  */
-static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp,
+static int ifx_spi_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
 	struct ifx_spi_device *ifx_dev = tty->driver_data;
@@ -722,9 +722,9 @@ static void ifx_spi_io(unsigned long data)
 		/* note len is BYTES, not transfers */
 		ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE;
 		ifx_dev->spi_xfer.cs_change = 0;
-		ifx_dev->spi_xfer.speed_hz = 12500000;
+		ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz;
 		/* ifx_dev->spi_xfer.speed_hz = 390625; */
-		ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8;
+		ifx_dev->spi_xfer.bits_per_word = spi_bpw;
 
 		ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer;
 		ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer;
@@ -732,7 +732,7 @@ static void ifx_spi_io(unsigned long data)
 		/*
 		 * setup dma pointers
 		 */
-		if (ifx_dev->is_6160) {
+		if (ifx_dev->use_dma) {
 			ifx_dev->spi_msg.is_dma_mapped = 1;
 			ifx_dev->tx_dma = ifx_dev->tx_bus;
 			ifx_dev->rx_dma = ifx_dev->rx_bus;
@@ -798,8 +798,8 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev)
 		goto error_ret;
 	}
 
-	pport->ops = &ifx_tty_port_ops;
 	tty_port_init(pport);
+	pport->ops = &ifx_tty_port_ops;
 	ifx_dev->minor = IFX_SPI_TTY_ID;
 	ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor,
 					       &ifx_dev->spi_dev->dev);
@@ -960,7 +960,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 {
 	int ret;
 	int srdy;
-	struct ifx_modem_platform_data *pl_data = NULL;
+	struct ifx_modem_platform_data *pl_data;
 	struct ifx_spi_device *ifx_dev;
 
 	if (saved_ifx_dev) {
@@ -968,6 +968,12 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
+	pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
+	if (!pl_data) {
+		dev_err(&spi->dev, "missing platform data!");
+		return -ENODEV;
+	}
+
 	/* initialize structure to hold our device variables */
 	ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL);
 	if (!ifx_dev) {
@@ -983,14 +989,25 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 	init_timer(&ifx_dev->spi_timer);
 	ifx_dev->spi_timer.function = ifx_spi_timeout;
 	ifx_dev->spi_timer.data = (unsigned long)ifx_dev;
-	ifx_dev->is_6160 = pl_data->is_6160;
+	ifx_dev->modem = pl_data->modem_type;
+	ifx_dev->use_dma = pl_data->use_dma;
+	ifx_dev->max_hz = pl_data->max_hz;
+	/* initialize spi mode, etc */
+	spi->max_speed_hz = ifx_dev->max_hz;
+	spi->mode = IFX_SPI_MODE | (SPI_LOOP & spi->mode);
+	spi->bits_per_word = spi_bpw;
+	ret = spi_setup(spi);
+	if (ret) {
+		dev_err(&spi->dev, "SPI setup wasn't successful %d", ret);
+		return -ENODEV;
+	}
 
 	/* ensure SPI protocol flags are initialized to enable transfer */
 	ifx_dev->spi_more = 0;
 	ifx_dev->spi_slave_cts = 0;
 
 	/*initialize transfer and dma buffers */
-	ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+	ifx_dev->tx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent,
 				IFX_SPI_TRANSFER_SIZE,
 				&ifx_dev->tx_bus,
 				GFP_KERNEL);
@@ -999,7 +1016,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		ret = -ENOMEM;
 		goto error_ret;
 	}
-	ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+	ifx_dev->rx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent,
 				IFX_SPI_TRANSFER_SIZE,
 				&ifx_dev->rx_bus,
 				GFP_KERNEL);
@@ -1025,18 +1042,11 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		goto error_ret;
 	}
 
-	pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
-	if (pl_data) {
-		ifx_dev->gpio.reset = pl_data->rst_pmu;
-		ifx_dev->gpio.po = pl_data->pwr_on;
-		ifx_dev->gpio.mrdy = pl_data->mrdy;
-		ifx_dev->gpio.srdy = pl_data->srdy;
-		ifx_dev->gpio.reset_out = pl_data->rst_out;
-	} else {
-		dev_err(&spi->dev, "missing platform data!");
-		ret = -ENODEV;
-		goto error_ret;
-	}
+	ifx_dev->gpio.reset = pl_data->rst_pmu;
+	ifx_dev->gpio.po = pl_data->pwr_on;
+	ifx_dev->gpio.mrdy = pl_data->mrdy;
+	ifx_dev->gpio.srdy = pl_data->srdy;
+	ifx_dev->gpio.reset_out = pl_data->rst_out;
 
 	dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d",
 		 ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy,
@@ -1322,9 +1332,9 @@ static const struct spi_device_id ifx_id_table[] = {
 MODULE_DEVICE_TABLE(spi, ifx_id_table);
 
 /* spi operations */
-static const struct spi_driver ifx_spi_driver_6160 = {
+static const struct spi_driver ifx_spi_driver = {
 	.driver = {
-		.name = "ifx6160",
+		.name = DRVNAME,
 		.bus = &spi_bus_type,
 		.pm = &ifx_spi_pm,
 		.owner = THIS_MODULE},
@@ -1346,7 +1356,7 @@ static void __exit ifx_spi_exit(void)
 {
 	/* unregister */
 	tty_unregister_driver(tty_drv);
-	spi_unregister_driver((void *)&ifx_spi_driver_6160);
+	spi_unregister_driver((void *)&ifx_spi_driver);
 }
 
 /**
@@ -1388,7 +1398,7 @@ static int __init ifx_spi_init(void)
 		return result;
 	}
 
-	result = spi_register_driver((void *)&ifx_spi_driver_6160);
+	result = spi_register_driver((void *)&ifx_spi_driver);
 	if (result) {
 		pr_err("%s: spi_register_driver failed(%d)",
 			DRVNAME, result);
diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h
index deb7b8d977dc..e8464baf9e75 100644
--- a/drivers/tty/serial/ifx6x60.h
+++ b/drivers/tty/serial/ifx6x60.h
@@ -29,8 +29,6 @@
 #define DRVNAME				"ifx6x60"
 #define TTYNAME				"ttyIFX"
 
-/* #define IFX_THROTTLE_CODE */
-
 #define IFX_SPI_MAX_MINORS		1
 #define IFX_SPI_TRANSFER_SIZE		2048
 #define IFX_SPI_FIFO_SIZE		4096
@@ -88,7 +86,9 @@ struct ifx_spi_device {
 	dma_addr_t rx_dma;
 	dma_addr_t tx_dma;
 
-	int is_6160;				/* Modem type */
+	int modem;		/* Modem type */
+	int use_dma;		/* provide dma-able addrs in SPI msg */
+	long max_hz;		/* max SPI frequency */
 
 	spinlock_t write_lock;
 	int write_pending;
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index beb1afa27d8d..7b951adac54b 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -601,7 +601,7 @@ static int max3100_startup(struct uart_port *port)
 	s->rts = 0;
 
 	sprintf(b, "max3100-%d", s->minor);
-	s->workqueue = create_freezeable_workqueue(b);
+	s->workqueue = create_freezable_workqueue(b);
 	if (!s->workqueue) {
 		dev_warn(&s->spi->dev, "cannot create workqueue\n");
 		return -EBUSY;
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index 910870edf708..750b4f627315 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -833,7 +833,7 @@ static int max3107_startup(struct uart_port *port)
 	struct max3107_port *s = container_of(port, struct max3107_port, port);
 
 	/* Initialize work queue */
-	s->workqueue = create_freezeable_workqueue("max3107");
+	s->workqueue = create_freezable_workqueue("max3107");
 	if (!s->workqueue) {
 		dev_err(&s->spi->dev, "Workqueue creation failed\n");
 		return -EBUSY;
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index d40010a22ecd..c111f36f5d21 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -16,9 +16,7 @@
  *    2/3 chan to port 1, 4/5 chan to port 3. Even number chans
  *    are used for RX, odd chans for TX
  *
- * 2. In A0 stepping, UART will not support TX half empty flag
- *
- * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
+ * 2. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
  *    asserted, only when the HW is reset the DDCD and DDSR will
  *    be triggered
  */
@@ -41,8 +39,6 @@
 #include <linux/io.h>
 #include <linux/debugfs.h>
 
-#define  MFD_HSU_A0_STEPPING	1
-
 #define HSU_DMA_BUF_SIZE	2048
 
 #define chan_readl(chan, offset)	readl(chan->reg + offset)
@@ -51,7 +47,10 @@
 #define mfd_readl(obj, offset)		readl(obj->reg + offset)
 #define mfd_writel(obj, offset, val)	writel(val, obj->reg + offset)
 
-#define HSU_DMA_TIMEOUT_CHECK_FREQ	(HZ/10)
+static int hsu_dma_enable;
+module_param(hsu_dma_enable, int, 0);
+MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \
+bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode.");
 
 struct hsu_dma_buffer {
 	u8		*buf;
@@ -65,7 +64,6 @@ struct hsu_dma_chan {
 	enum dma_data_direction	dirt;
 	struct uart_hsu_port	*uport;
 	void __iomem		*reg;
-	struct timer_list	rx_timer; /* only needed by RX channel */
 };
 
 struct uart_hsu_port {
@@ -355,8 +353,6 @@ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf
 					 | (0x1 << 24)	/* timeout bit, see HSU Errata 1 */
 					 );
 	chan_writel(rxc, HSU_CH_CR, 0x3);
-
-	mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
 }
 
 /* Protected by spin_lock_irqsave(port->lock) */
@@ -420,7 +416,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
 		chan_writel(chan, HSU_CH_CR, 0x3);
 		return;
 	}
-	del_timer(&chan->rx_timer);
 
 	dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
 			dbuf->dma_size, DMA_FROM_DEVICE);
@@ -448,8 +443,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
 	tty_flip_buffer_push(tty);
 
 	chan_writel(chan, HSU_CH_CR, 0x3);
-	chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ;
-	add_timer(&chan->rx_timer);
 
 }
 
@@ -551,16 +544,9 @@ static void transmit_chars(struct uart_hsu_port *up)
 		return;
 	}
 
-#ifndef MFD_HSU_A0_STEPPING
+	/* The IRQ is for TX FIFO half-empty */
 	count = up->port.fifosize / 2;
-#else
-	/*
-	 * A0 only supports fully empty IRQ, and the first char written
-	 * into it won't clear the EMPT bit, so we may need be cautious
-	 * by useing a shorter buffer
-	 */
-	count = up->port.fifosize - 4;
-#endif
+
 	do {
 		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -769,9 +755,8 @@ static void serial_hsu_break_ctl(struct uart_port *port, int break_state)
 /*
  * What special to do:
  * 1. chose the 64B fifo mode
- * 2. make sure not to select half empty mode for A0 stepping
- * 3. start dma or pio depends on configuration
- * 4. we only allocate dma memory when needed
+ * 2. start dma or pio depends on configuration
+ * 3. we only allocate dma memory when needed
  */
 static int serial_hsu_startup(struct uart_port *port)
 {
@@ -870,8 +855,6 @@ static void serial_hsu_shutdown(struct uart_port *port)
 		container_of(port, struct uart_hsu_port, port);
 	unsigned long flags;
 
-	del_timer_sync(&up->rxc->rx_timer);
-
 	/* Disable interrupts from this port */
 	up->ier = 0;
 	serial_out(up, UART_IER, 0);
@@ -977,10 +960,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
 		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B;
 
 	fcr |= UART_FCR_HSU_64B_FIFO;
-#ifdef MFD_HSU_A0_STEPPING
-	/* A0 doesn't support half empty IRQ */
-	fcr |= UART_FCR_FULL_EMPT_TXI;
-#endif
 
 	/*
 	 * Ok, we're now changing the port state.  Do it with
@@ -1343,28 +1322,6 @@ err_disable:
 	return ret;
 }
 
-static void hsu_dma_rx_timeout(unsigned long data)
-{
-	struct hsu_dma_chan *chan = (void *)data;
-	struct uart_hsu_port *up = chan->uport;
-	struct hsu_dma_buffer *dbuf = &up->rxbuf;
-	int count = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-
-	count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
-
-	if (!count) {
-		mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
-		goto exit;
-	}
-
-	hsu_dma_rx(up, 0);
-exit:
-	spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
 static void hsu_global_init(void)
 {
 	struct hsu_port *hsu;
@@ -1415,6 +1372,12 @@ static void hsu_global_init(void)
 
 		serial_hsu_ports[i] = uport;
 		uport->index = i;
+
+		if (hsu_dma_enable & (1<<i))
+			uport->use_dma = 1;
+		else
+			uport->use_dma = 0;
+
 		uport++;
 	}
 
@@ -1427,12 +1390,6 @@ static void hsu_global_init(void)
 		dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET +
 				i * HSU_DMA_CHANS_REG_LENGTH;
 
-		/* Work around for RX */
-		if (dchan->dirt == DMA_FROM_DEVICE) {
-			init_timer(&dchan->rx_timer);
-			dchan->rx_timer.function = hsu_dma_rx_timeout;
-			dchan->rx_timer.data = (unsigned long)dchan;
-		}
 		dchan++;
 	}
 
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 126ec7f568ec..a0bcd8a3758d 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1302,8 +1302,7 @@ static struct of_device_id mpc52xx_uart_of_match[] = {
 	{},
 };
 
-static int __devinit
-mpc52xx_uart_of_probe(struct platform_device *op, const struct of_device_id *match)
+static int __devinit mpc52xx_uart_of_probe(struct platform_device *op)
 {
 	int idx = -1;
 	unsigned int uartclk;
@@ -1311,8 +1310,6 @@ mpc52xx_uart_of_probe(struct platform_device *op, const struct of_device_id *mat
 	struct resource res;
 	int ret;
 
-	dev_dbg(&op->dev, "mpc52xx_uart_probe(op=%p, match=%p)\n", op, match);
-
 	/* Check validity & presence */
 	for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++)
 		if (mpc52xx_uart_nodes[idx] == op->dev.of_node)
@@ -1453,7 +1450,7 @@ mpc52xx_uart_of_enumerate(void)
 
 MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match);
 
-static struct of_platform_driver mpc52xx_uart_of_driver = {
+static struct platform_driver mpc52xx_uart_of_driver = {
 	.probe		= mpc52xx_uart_of_probe,
 	.remove		= mpc52xx_uart_of_remove,
 #ifdef CONFIG_PM
@@ -1497,9 +1494,9 @@ mpc52xx_uart_init(void)
 			return ret;
 	}
 
-	ret = of_register_platform_driver(&mpc52xx_uart_of_driver);
+	ret = platform_driver_register(&mpc52xx_uart_of_driver);
 	if (ret) {
-		printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n",
+		printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
 		       __FILE__, ret);
 		uart_unregister_driver(&mpc52xx_uart_driver);
 		return ret;
@@ -1514,7 +1511,7 @@ mpc52xx_uart_exit(void)
 	if (psc_ops->fifoc_uninit)
 		psc_ops->fifoc_uninit();
 
-	of_unregister_platform_driver(&mpc52xx_uart_of_driver);
+	platform_driver_unregister(&mpc52xx_uart_of_driver);
 	uart_unregister_driver(&mpc52xx_uart_driver);
 }
 
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index b62857bf2fdb..37e13c3d91d9 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -51,7 +51,7 @@
 struct uart_max3110 {
 	struct uart_port port;
 	struct spi_device *spi;
-	char name[24];
+	char name[SPI_NAME_SIZE];
 
 	wait_queue_head_t wq;
 	struct task_struct *main_thread;
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
new file mode 100644
index 000000000000..2e7fc9cee9cc
--- /dev/null
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -0,0 +1,1880 @@
+/*
+ * MSM 7k/8k High speed uart driver
+ *
+ * Copyright (c) 2007-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2008 Google Inc.
+ * Modified: Nick Pelly <npelly@google.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * Has optional support for uart power management independent of linux
+ * suspend/resume:
+ *
+ * RX wakeup.
+ * UART wakeup can be triggered by RX activity (using a wakeup GPIO on the
+ * UART RX pin). This should only be used if there is not a wakeup
+ * GPIO on the UART CTS, and the first RX byte is known (for example, with the
+ * Bluetooth Texas Instruments HCILL protocol), since the first RX byte will
+ * always be lost. RTS will be asserted even while the UART is off in this mode
+ * of operation. See msm_serial_hs_platform_data.rx_wakeup_irq.
+ */
+
+#include <linux/module.h>
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <linux/atomic.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <linux/platform_data/msm_serial_hs.h>
+
+/* HSUART Registers */
+#define UARTDM_MR1_ADDR 0x0
+#define UARTDM_MR2_ADDR 0x4
+
+/* Data Mover result codes */
+#define RSLT_FIFO_CNTR_BMSK (0xE << 28)
+#define RSLT_VLD            BIT(1)
+
+/* write only register */
+#define UARTDM_CSR_ADDR 0x8
+#define UARTDM_CSR_115200 0xFF
+#define UARTDM_CSR_57600  0xEE
+#define UARTDM_CSR_38400  0xDD
+#define UARTDM_CSR_28800  0xCC
+#define UARTDM_CSR_19200  0xBB
+#define UARTDM_CSR_14400  0xAA
+#define UARTDM_CSR_9600   0x99
+#define UARTDM_CSR_7200   0x88
+#define UARTDM_CSR_4800   0x77
+#define UARTDM_CSR_3600   0x66
+#define UARTDM_CSR_2400   0x55
+#define UARTDM_CSR_1200   0x44
+#define UARTDM_CSR_600    0x33
+#define UARTDM_CSR_300    0x22
+#define UARTDM_CSR_150    0x11
+#define UARTDM_CSR_75     0x00
+
+/* write only register */
+#define UARTDM_TF_ADDR 0x70
+#define UARTDM_TF2_ADDR 0x74
+#define UARTDM_TF3_ADDR 0x78
+#define UARTDM_TF4_ADDR 0x7C
+
+/* write only register */
+#define UARTDM_CR_ADDR 0x10
+#define UARTDM_IMR_ADDR 0x14
+
+#define UARTDM_IPR_ADDR 0x18
+#define UARTDM_TFWR_ADDR 0x1c
+#define UARTDM_RFWR_ADDR 0x20
+#define UARTDM_HCR_ADDR 0x24
+#define UARTDM_DMRX_ADDR 0x34
+#define UARTDM_IRDA_ADDR 0x38
+#define UARTDM_DMEN_ADDR 0x3c
+
+/* UART_DM_NO_CHARS_FOR_TX */
+#define UARTDM_NCF_TX_ADDR 0x40
+
+#define UARTDM_BADR_ADDR 0x44
+
+#define UARTDM_SIM_CFG_ADDR 0x80
+/* Read Only register */
+#define UARTDM_SR_ADDR 0x8
+
+/* Read Only register */
+#define UARTDM_RF_ADDR  0x70
+#define UARTDM_RF2_ADDR 0x74
+#define UARTDM_RF3_ADDR 0x78
+#define UARTDM_RF4_ADDR 0x7C
+
+/* Read Only register */
+#define UARTDM_MISR_ADDR 0x10
+
+/* Read Only register */
+#define UARTDM_ISR_ADDR 0x14
+#define UARTDM_RX_TOTAL_SNAP_ADDR 0x38
+
+#define UARTDM_RXFS_ADDR 0x50
+
+/* Register field Mask Mapping */
+#define UARTDM_SR_PAR_FRAME_BMSK        BIT(5)
+#define UARTDM_SR_OVERRUN_BMSK          BIT(4)
+#define UARTDM_SR_TXEMT_BMSK            BIT(3)
+#define UARTDM_SR_TXRDY_BMSK            BIT(2)
+#define UARTDM_SR_RXRDY_BMSK            BIT(0)
+
+#define UARTDM_CR_TX_DISABLE_BMSK       BIT(3)
+#define UARTDM_CR_RX_DISABLE_BMSK       BIT(1)
+#define UARTDM_CR_TX_EN_BMSK            BIT(2)
+#define UARTDM_CR_RX_EN_BMSK            BIT(0)
+
+/* UARTDM_CR channel_comman bit value (register field is bits 8:4) */
+#define RESET_RX                0x10
+#define RESET_TX                0x20
+#define RESET_ERROR_STATUS      0x30
+#define RESET_BREAK_INT         0x40
+#define START_BREAK             0x50
+#define STOP_BREAK              0x60
+#define RESET_CTS               0x70
+#define RESET_STALE_INT         0x80
+#define RFR_LOW                 0xD0
+#define RFR_HIGH                0xE0
+#define CR_PROTECTION_EN        0x100
+#define STALE_EVENT_ENABLE      0x500
+#define STALE_EVENT_DISABLE     0x600
+#define FORCE_STALE_EVENT       0x400
+#define CLEAR_TX_READY          0x300
+#define RESET_TX_ERROR          0x800
+#define RESET_TX_DONE           0x810
+
+#define UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK 0xffffff00
+#define UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK 0x3f
+#define UARTDM_MR1_CTS_CTL_BMSK 0x40
+#define UARTDM_MR1_RX_RDY_CTL_BMSK 0x80
+
+#define UARTDM_MR2_ERROR_MODE_BMSK 0x40
+#define UARTDM_MR2_BITS_PER_CHAR_BMSK 0x30
+
+/* bits per character configuration */
+#define FIVE_BPC  (0 << 4)
+#define SIX_BPC   (1 << 4)
+#define SEVEN_BPC (2 << 4)
+#define EIGHT_BPC (3 << 4)
+
+#define UARTDM_MR2_STOP_BIT_LEN_BMSK 0xc
+#define STOP_BIT_ONE (1 << 2)
+#define STOP_BIT_TWO (3 << 2)
+
+#define UARTDM_MR2_PARITY_MODE_BMSK 0x3
+
+/* Parity configuration */
+#define NO_PARITY 0x0
+#define EVEN_PARITY 0x1
+#define ODD_PARITY 0x2
+#define SPACE_PARITY 0x3
+
+#define UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK 0xffffff80
+#define UARTDM_IPR_STALE_LSB_BMSK 0x1f
+
+/* These can be used for both ISR and IMR register */
+#define UARTDM_ISR_TX_READY_BMSK        BIT(7)
+#define UARTDM_ISR_CURRENT_CTS_BMSK     BIT(6)
+#define UARTDM_ISR_DELTA_CTS_BMSK       BIT(5)
+#define UARTDM_ISR_RXLEV_BMSK           BIT(4)
+#define UARTDM_ISR_RXSTALE_BMSK         BIT(3)
+#define UARTDM_ISR_RXBREAK_BMSK         BIT(2)
+#define UARTDM_ISR_RXHUNT_BMSK          BIT(1)
+#define UARTDM_ISR_TXLEV_BMSK           BIT(0)
+
+/* Field definitions for UART_DM_DMEN*/
+#define UARTDM_TX_DM_EN_BMSK 0x1
+#define UARTDM_RX_DM_EN_BMSK 0x2
+
+#define UART_FIFOSIZE 64
+#define UARTCLK 7372800
+
+/* Rx DMA request states */
+enum flush_reason {
+	FLUSH_NONE,
+	FLUSH_DATA_READY,
+	FLUSH_DATA_INVALID,  /* values after this indicate invalid data */
+	FLUSH_IGNORE = FLUSH_DATA_INVALID,
+	FLUSH_STOP,
+	FLUSH_SHUTDOWN,
+};
+
+/* UART clock states */
+enum msm_hs_clk_states_e {
+	MSM_HS_CLK_PORT_OFF,     /* port not in use */
+	MSM_HS_CLK_OFF,          /* clock disabled */
+	MSM_HS_CLK_REQUEST_OFF,  /* disable after TX and RX flushed */
+	MSM_HS_CLK_ON,           /* clock enabled */
+};
+
+/* Track the forced RXSTALE flush during clock off sequence.
+ * These states are only valid during MSM_HS_CLK_REQUEST_OFF */
+enum msm_hs_clk_req_off_state_e {
+	CLK_REQ_OFF_START,
+	CLK_REQ_OFF_RXSTALE_ISSUED,
+	CLK_REQ_OFF_FLUSH_ISSUED,
+	CLK_REQ_OFF_RXSTALE_FLUSHED,
+};
+
+/**
+ * struct msm_hs_tx
+ * @tx_ready_int_en: ok to dma more tx?
+ * @dma_in_flight: tx dma in progress
+ * @xfer: top level DMA command pointer structure
+ * @command_ptr: third level command struct pointer
+ * @command_ptr_ptr: second level command list struct pointer
+ * @mapped_cmd_ptr: DMA view of third level command struct
+ * @mapped_cmd_ptr_ptr: DMA view of second level command list struct
+ * @tx_count: number of bytes to transfer in DMA transfer
+ * @dma_base: DMA view of UART xmit buffer
+ *
+ * This structure describes a single Tx DMA transaction. MSM DMA
+ * commands have two levels of indirection. The top level command
+ * ptr points to a list of command ptr which in turn points to a
+ * single DMA 'command'. In our case each Tx transaction consists
+ * of a single second level pointer pointing to a 'box type' command.
+ */
+struct msm_hs_tx {
+	unsigned int tx_ready_int_en;
+	unsigned int dma_in_flight;
+	struct msm_dmov_cmd xfer;
+	dmov_box *command_ptr;
+	u32 *command_ptr_ptr;
+	dma_addr_t mapped_cmd_ptr;
+	dma_addr_t mapped_cmd_ptr_ptr;
+	int tx_count;
+	dma_addr_t dma_base;
+};
+
+/**
+ * struct msm_hs_rx
+ * @flush: Rx DMA request state
+ * @xfer: top level DMA command pointer structure
+ * @cmdptr_dmaaddr: DMA view of second level command structure
+ * @command_ptr: third level DMA command pointer structure
+ * @command_ptr_ptr: second level DMA command list pointer
+ * @mapped_cmd_ptr: DMA view of the third level command structure
+ * @wait: wait for DMA completion before shutdown
+ * @buffer: destination buffer for RX DMA
+ * @rbuffer: DMA view of buffer
+ * @pool: dma pool out of which coherent rx buffer is allocated
+ * @tty_work: private work-queue for tty flip buffer push task
+ *
+ * This structure describes a single Rx DMA transaction. Rx DMA
+ * transactions use box mode DMA commands.
+ */
+struct msm_hs_rx {
+	enum flush_reason flush;
+	struct msm_dmov_cmd xfer;
+	dma_addr_t cmdptr_dmaaddr;
+	dmov_box *command_ptr;
+	u32 *command_ptr_ptr;
+	dma_addr_t mapped_cmd_ptr;
+	wait_queue_head_t wait;
+	dma_addr_t rbuffer;
+	unsigned char *buffer;
+	struct dma_pool *pool;
+	struct work_struct tty_work;
+};
+
+/**
+ * struct msm_hs_rx_wakeup
+ * @irq: IRQ line to be configured as interrupt source on Rx activity
+ * @ignore: boolean value. 1 = ignore the wakeup interrupt
+ * @rx_to_inject: extra character to be inserted to Rx tty on wakeup
+ * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character
+ *
+ * This is an optional structure required for UART Rx GPIO IRQ based
+ * wakeup from low power state. UART wakeup can be triggered by RX activity
+ * (using a wakeup GPIO on the UART RX pin). This should only be used if
+ * there is not a wakeup GPIO on the UART CTS, and the first RX byte is
+ * known (eg., with the Bluetooth Texas Instruments HCILL protocol),
+ * since the first RX byte will always be lost. RTS will be asserted even
+ * while the UART is clocked off in this mode of operation.
+ */
+struct msm_hs_rx_wakeup {
+	int irq;  /* < 0 indicates low power wakeup disabled */
+	unsigned char ignore;
+	unsigned char inject_rx;
+	char rx_to_inject;
+};
+
+/**
+ * struct msm_hs_port
+ * @uport: embedded uart port structure
+ * @imr_reg: shadow value of UARTDM_IMR
+ * @clk: uart input clock handle
+ * @tx: Tx transaction related data structure
+ * @rx: Rx transaction related data structure
+ * @dma_tx_channel: Tx DMA command channel
+ * @dma_rx_channel Rx DMA command channel
+ * @dma_tx_crci: Tx channel rate control interface number
+ * @dma_rx_crci: Rx channel rate control interface number
+ * @clk_off_timer: Timer to poll DMA event completion before clock off
+ * @clk_off_delay: clk_off_timer poll interval
+ * @clk_state: overall clock state
+ * @clk_req_off_state: post flush clock states
+ * @rx_wakeup: optional rx_wakeup feature related data
+ * @exit_lpm_cb: optional callback to exit low power mode
+ *
+ * Low level serial port structure.
+ */
+struct msm_hs_port {
+	struct uart_port uport;
+	unsigned long imr_reg;
+	struct clk *clk;
+	struct msm_hs_tx tx;
+	struct msm_hs_rx rx;
+
+	int dma_tx_channel;
+	int dma_rx_channel;
+	int dma_tx_crci;
+	int dma_rx_crci;
+
+	struct hrtimer clk_off_timer;
+	ktime_t clk_off_delay;
+	enum msm_hs_clk_states_e clk_state;
+	enum msm_hs_clk_req_off_state_e clk_req_off_state;
+
+	struct msm_hs_rx_wakeup rx_wakeup;
+	void (*exit_lpm_cb)(struct uart_port *);
+};
+
+#define MSM_UARTDM_BURST_SIZE 16   /* DM burst size (in bytes) */
+#define UARTDM_TX_BUF_SIZE UART_XMIT_SIZE
+#define UARTDM_RX_BUF_SIZE 512
+
+#define UARTDM_NR 2
+
+static struct msm_hs_port q_uart_port[UARTDM_NR];
+static struct platform_driver msm_serial_hs_platform_driver;
+static struct uart_driver msm_hs_driver;
+static struct uart_ops msm_hs_ops;
+static struct workqueue_struct *msm_hs_workqueue;
+
+#define UARTDM_TO_MSM(uart_port) \
+	container_of((uart_port), struct msm_hs_port, uport)
+
+static unsigned int use_low_power_rx_wakeup(struct msm_hs_port
+						   *msm_uport)
+{
+	return (msm_uport->rx_wakeup.irq >= 0);
+}
+
+static unsigned int msm_hs_read(struct uart_port *uport,
+				       unsigned int offset)
+{
+	return ioread32(uport->membase + offset);
+}
+
+static void msm_hs_write(struct uart_port *uport, unsigned int offset,
+				 unsigned int value)
+{
+	iowrite32(value, uport->membase + offset);
+}
+
+static void msm_hs_release_port(struct uart_port *port)
+{
+	iounmap(port->membase);
+}
+
+static int msm_hs_request_port(struct uart_port *port)
+{
+	port->membase = ioremap(port->mapbase, PAGE_SIZE);
+	if (unlikely(!port->membase))
+		return -ENOMEM;
+
+	/* configure the CR Protection to Enable */
+	msm_hs_write(port, UARTDM_CR_ADDR, CR_PROTECTION_EN);
+	return 0;
+}
+
+static int __devexit msm_hs_remove(struct platform_device *pdev)
+{
+
+	struct msm_hs_port *msm_uport;
+	struct device *dev;
+
+	if (pdev->id < 0 || pdev->id >= UARTDM_NR) {
+		printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	msm_uport = &q_uart_port[pdev->id];
+	dev = msm_uport->uport.dev;
+
+	dma_unmap_single(dev, msm_uport->rx.mapped_cmd_ptr, sizeof(dmov_box),
+			 DMA_TO_DEVICE);
+	dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer,
+		      msm_uport->rx.rbuffer);
+	dma_pool_destroy(msm_uport->rx.pool);
+
+	dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32 *),
+			 DMA_TO_DEVICE);
+	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32 *),
+			 DMA_TO_DEVICE);
+	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box),
+			 DMA_TO_DEVICE);
+
+	uart_remove_one_port(&msm_hs_driver, &msm_uport->uport);
+	clk_put(msm_uport->clk);
+
+	/* Free the tx resources */
+	kfree(msm_uport->tx.command_ptr);
+	kfree(msm_uport->tx.command_ptr_ptr);
+
+	/* Free the rx resources */
+	kfree(msm_uport->rx.command_ptr);
+	kfree(msm_uport->rx.command_ptr_ptr);
+
+	iounmap(msm_uport->uport.membase);
+
+	return 0;
+}
+
+static int msm_hs_init_clk_locked(struct uart_port *uport)
+{
+	int ret;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	ret = clk_enable(msm_uport->clk);
+	if (ret) {
+		printk(KERN_ERR "Error could not turn on UART clk\n");
+		return ret;
+	}
+
+	/* Set up the MREG/NREG/DREG/MNDREG */
+	ret = clk_set_rate(msm_uport->clk, uport->uartclk);
+	if (ret) {
+		printk(KERN_WARNING "Error setting clock rate on UART\n");
+		clk_disable(msm_uport->clk);
+		return ret;
+	}
+
+	msm_uport->clk_state = MSM_HS_CLK_ON;
+	return 0;
+}
+
+/* Enable and Disable clocks  (Used for power management) */
+static void msm_hs_pm(struct uart_port *uport, unsigned int state,
+		      unsigned int oldstate)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	if (use_low_power_rx_wakeup(msm_uport) ||
+	    msm_uport->exit_lpm_cb)
+		return;  /* ignore linux PM states,
+			    use msm_hs_request_clock API */
+
+	switch (state) {
+	case 0:
+		clk_enable(msm_uport->clk);
+		break;
+	case 3:
+		clk_disable(msm_uport->clk);
+		break;
+	default:
+		dev_err(uport->dev, "msm_serial: Unknown PM state %d\n",
+			state);
+	}
+}
+
+/*
+ * programs the UARTDM_CSR register with correct bit rates
+ *
+ * Interrupts should be disabled before we are called, as
+ * we modify Set Baud rate
+ * Set receive stale interrupt level, dependant on Bit Rate
+ * Goal is to have around 8 ms before indicate stale.
+ * roundup (((Bit Rate * .008) / 10) + 1
+ */
+static void msm_hs_set_bps_locked(struct uart_port *uport,
+				  unsigned int bps)
+{
+	unsigned long rxstale;
+	unsigned long data;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	switch (bps) {
+	case 300:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_75);
+		rxstale = 1;
+		break;
+	case 600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_150);
+		rxstale = 1;
+		break;
+	case 1200:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_300);
+		rxstale = 1;
+		break;
+	case 2400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_600);
+		rxstale = 1;
+		break;
+	case 4800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_1200);
+		rxstale = 1;
+		break;
+	case 9600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400);
+		rxstale = 2;
+		break;
+	case 14400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_3600);
+		rxstale = 3;
+		break;
+	case 19200:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_4800);
+		rxstale = 4;
+		break;
+	case 28800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_7200);
+		rxstale = 6;
+		break;
+	case 38400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_9600);
+		rxstale = 8;
+		break;
+	case 57600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_14400);
+		rxstale = 16;
+		break;
+	case 76800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_19200);
+		rxstale = 16;
+		break;
+	case 115200:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_28800);
+		rxstale = 31;
+		break;
+	case 230400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_57600);
+		rxstale = 31;
+		break;
+	case 460800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200);
+		rxstale = 31;
+		break;
+	case 4000000:
+	case 3686400:
+	case 3200000:
+	case 3500000:
+	case 3000000:
+	case 2500000:
+	case 1500000:
+	case 1152000:
+	case 1000000:
+	case 921600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200);
+		rxstale = 31;
+		break;
+	default:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400);
+		/* default to 9600 */
+		bps = 9600;
+		rxstale = 2;
+		break;
+	}
+	if (bps > 460800)
+		uport->uartclk = bps * 16;
+	else
+		uport->uartclk = UARTCLK;
+
+	if (clk_set_rate(msm_uport->clk, uport->uartclk)) {
+		printk(KERN_WARNING "Error setting clock rate on UART\n");
+		return;
+	}
+
+	data = rxstale & UARTDM_IPR_STALE_LSB_BMSK;
+	data |= UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK & (rxstale << 2);
+
+	msm_hs_write(uport, UARTDM_IPR_ADDR, data);
+}
+
+/*
+ * termios :  new ktermios
+ * oldtermios:  old ktermios previous setting
+ *
+ * Configure the serial port
+ */
+static void msm_hs_set_termios(struct uart_port *uport,
+			       struct ktermios *termios,
+			       struct ktermios *oldtermios)
+{
+	unsigned int bps;
+	unsigned long data;
+	unsigned long flags;
+	unsigned int c_cflag = termios->c_cflag;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	/* 300 is the minimum baud support by the driver  */
+	bps = uart_get_baud_rate(uport, termios, oldtermios, 200, 4000000);
+
+	/* Temporary remapping  200 BAUD to 3.2 mbps */
+	if (bps == 200)
+		bps = 3200000;
+
+	msm_hs_set_bps_locked(uport, bps);
+
+	data = msm_hs_read(uport, UARTDM_MR2_ADDR);
+	data &= ~UARTDM_MR2_PARITY_MODE_BMSK;
+	/* set parity */
+	if (PARENB == (c_cflag & PARENB)) {
+		if (PARODD == (c_cflag & PARODD))
+			data |= ODD_PARITY;
+		else if (CMSPAR == (c_cflag & CMSPAR))
+			data |= SPACE_PARITY;
+		else
+			data |= EVEN_PARITY;
+	}
+
+	/* Set bits per char */
+	data &= ~UARTDM_MR2_BITS_PER_CHAR_BMSK;
+
+	switch (c_cflag & CSIZE) {
+	case CS5:
+		data |= FIVE_BPC;
+		break;
+	case CS6:
+		data |= SIX_BPC;
+		break;
+	case CS7:
+		data |= SEVEN_BPC;
+		break;
+	default:
+		data |= EIGHT_BPC;
+		break;
+	}
+	/* stop bits */
+	if (c_cflag & CSTOPB) {
+		data |= STOP_BIT_TWO;
+	} else {
+		/* otherwise 1 stop bit */
+		data |= STOP_BIT_ONE;
+	}
+	data |= UARTDM_MR2_ERROR_MODE_BMSK;
+	/* write parity/bits per char/stop bit configuration */
+	msm_hs_write(uport, UARTDM_MR2_ADDR, data);
+
+	/* Configure HW flow control */
+	data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+
+	data &= ~(UARTDM_MR1_CTS_CTL_BMSK | UARTDM_MR1_RX_RDY_CTL_BMSK);
+
+	if (c_cflag & CRTSCTS) {
+		data |= UARTDM_MR1_CTS_CTL_BMSK;
+		data |= UARTDM_MR1_RX_RDY_CTL_BMSK;
+	}
+
+	msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+
+	uport->ignore_status_mask = termios->c_iflag & INPCK;
+	uport->ignore_status_mask |= termios->c_iflag & IGNPAR;
+	uport->read_status_mask = (termios->c_cflag & CREAD);
+
+	msm_hs_write(uport, UARTDM_IMR_ADDR, 0);
+
+	/* Set Transmit software time out */
+	uart_update_timeout(uport, c_cflag, bps);
+
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX);
+
+	if (msm_uport->rx.flush == FLUSH_NONE) {
+		msm_uport->rx.flush = FLUSH_IGNORE;
+		msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+	}
+
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	clk_disable(msm_uport->clk);
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+/*
+ *  Standard API, Transmitter
+ *  Any character in the transmit shift register is sent
+ */
+static unsigned int msm_hs_tx_empty(struct uart_port *uport)
+{
+	unsigned int data;
+	unsigned int ret = 0;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	data = msm_hs_read(uport, UARTDM_SR_ADDR);
+	if (data & UARTDM_SR_TXEMT_BMSK)
+		ret = TIOCSER_TEMT;
+
+	clk_disable(msm_uport->clk);
+
+	return ret;
+}
+
+/*
+ *  Standard API, Stop transmitter.
+ *  Any character in the transmit shift register is sent as
+ *  well as the current data mover transfer .
+ */
+static void msm_hs_stop_tx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	msm_uport->tx.tx_ready_int_en = 0;
+}
+
+/*
+ *  Standard API, Stop receiver as soon as possible.
+ *
+ *  Function immediately terminates the operation of the
+ *  channel receiver and any incoming characters are lost. None
+ *  of the receiver status bits are affected by this command and
+ *  characters that are already in the receive FIFO there.
+ */
+static void msm_hs_stop_rx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	unsigned int data;
+
+	clk_enable(msm_uport->clk);
+
+	/* disable dlink */
+	data = msm_hs_read(uport, UARTDM_DMEN_ADDR);
+	data &= ~UARTDM_RX_DM_EN_BMSK;
+	msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+
+	/* Disable the receiver */
+	if (msm_uport->rx.flush == FLUSH_NONE)
+		msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+
+	if (msm_uport->rx.flush != FLUSH_SHUTDOWN)
+		msm_uport->rx.flush = FLUSH_STOP;
+
+	clk_disable(msm_uport->clk);
+}
+
+/*  Transmit the next chunk of data */
+static void msm_hs_submit_tx_locked(struct uart_port *uport)
+{
+	int left;
+	int tx_count;
+	dma_addr_t src_addr;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct circ_buf *tx_buf = &msm_uport->uport.state->xmit;
+
+	if (uart_circ_empty(tx_buf) || uport->state->port.tty->stopped) {
+		msm_hs_stop_tx_locked(uport);
+		return;
+	}
+
+	tx->dma_in_flight = 1;
+
+	tx_count = uart_circ_chars_pending(tx_buf);
+
+	if (UARTDM_TX_BUF_SIZE < tx_count)
+		tx_count = UARTDM_TX_BUF_SIZE;
+
+	left = UART_XMIT_SIZE - tx_buf->tail;
+
+	if (tx_count > left)
+		tx_count = left;
+
+	src_addr = tx->dma_base + tx_buf->tail;
+	dma_sync_single_for_device(uport->dev, src_addr, tx_count,
+				   DMA_TO_DEVICE);
+
+	tx->command_ptr->num_rows = (((tx_count + 15) >> 4) << 16) |
+				     ((tx_count + 15) >> 4);
+	tx->command_ptr->src_row_addr = src_addr;
+
+	dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr,
+				   sizeof(dmov_box), DMA_TO_DEVICE);
+
+	*tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr);
+
+	dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr,
+				   sizeof(u32 *), DMA_TO_DEVICE);
+
+	/* Save tx_count to use in Callback */
+	tx->tx_count = tx_count;
+	msm_hs_write(uport, UARTDM_NCF_TX_ADDR, tx_count);
+
+	/* Disable the tx_ready interrupt */
+	msm_uport->imr_reg &= ~UARTDM_ISR_TX_READY_BMSK;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+	msm_dmov_enqueue_cmd(msm_uport->dma_tx_channel, &tx->xfer);
+}
+
+/* Start to receive the next chunk of data */
+static void msm_hs_start_rx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+	msm_hs_write(uport, UARTDM_DMRX_ADDR, UARTDM_RX_BUF_SIZE);
+	msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_ENABLE);
+	msm_uport->imr_reg |= UARTDM_ISR_RXLEV_BMSK;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	msm_uport->rx.flush = FLUSH_NONE;
+	msm_dmov_enqueue_cmd(msm_uport->dma_rx_channel, &msm_uport->rx.xfer);
+
+	/* might have finished RX and be ready to clock off */
+	hrtimer_start(&msm_uport->clk_off_timer, msm_uport->clk_off_delay,
+			HRTIMER_MODE_REL);
+}
+
+/* Enable the transmitter Interrupt */
+static void msm_hs_start_tx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	if (msm_uport->exit_lpm_cb)
+		msm_uport->exit_lpm_cb(uport);
+
+	if (msm_uport->tx.tx_ready_int_en == 0) {
+		msm_uport->tx.tx_ready_int_en = 1;
+		msm_hs_submit_tx_locked(uport);
+	}
+
+	clk_disable(msm_uport->clk);
+}
+
+/*
+ *  This routine is called when we are done with a DMA transfer
+ *
+ *  This routine is registered with Data mover when we set
+ *  up a Data Mover transfer. It is called from Data mover ISR
+ *  when the DMA transfer is done.
+ */
+static void msm_hs_dmov_tx_callback(struct msm_dmov_cmd *cmd_ptr,
+					unsigned int result,
+					struct msm_dmov_errdata *err)
+{
+	unsigned long flags;
+	struct msm_hs_port *msm_uport;
+
+	/* DMA did not finish properly */
+	WARN_ON((((result & RSLT_FIFO_CNTR_BMSK) >> 28) == 1) &&
+		!(result & RSLT_VLD));
+
+	msm_uport = container_of(cmd_ptr, struct msm_hs_port, tx.xfer);
+
+	spin_lock_irqsave(&msm_uport->uport.lock, flags);
+	clk_enable(msm_uport->clk);
+
+	msm_uport->imr_reg |= UARTDM_ISR_TX_READY_BMSK;
+	msm_hs_write(&msm_uport->uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	clk_disable(msm_uport->clk);
+	spin_unlock_irqrestore(&msm_uport->uport.lock, flags);
+}
+
+/*
+ * This routine is called when we are done with a DMA transfer or the
+ * a flush has been sent to the data mover driver.
+ *
+ * This routine is registered with Data mover when we set up a Data Mover
+ *  transfer. It is called from Data mover ISR when the DMA transfer is done.
+ */
+static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr,
+					unsigned int result,
+					struct msm_dmov_errdata *err)
+{
+	int retval;
+	int rx_count;
+	unsigned long status;
+	unsigned int error_f = 0;
+	unsigned long flags;
+	unsigned int flush;
+	struct tty_struct *tty;
+	struct uart_port *uport;
+	struct msm_hs_port *msm_uport;
+
+	msm_uport = container_of(cmd_ptr, struct msm_hs_port, rx.xfer);
+	uport = &msm_uport->uport;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	tty = uport->state->port.tty;
+
+	msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE);
+
+	status = msm_hs_read(uport, UARTDM_SR_ADDR);
+
+	/* overflow is not connect to data in a FIFO */
+	if (unlikely((status & UARTDM_SR_OVERRUN_BMSK) &&
+		     (uport->read_status_mask & CREAD))) {
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		uport->icount.buf_overrun++;
+		error_f = 1;
+	}
+
+	if (!(uport->ignore_status_mask & INPCK))
+		status = status & ~(UARTDM_SR_PAR_FRAME_BMSK);
+
+	if (unlikely(status & UARTDM_SR_PAR_FRAME_BMSK)) {
+		/* Can not tell difference between parity & frame error */
+		uport->icount.parity++;
+		error_f = 1;
+		if (uport->ignore_status_mask & IGNPAR)
+			tty_insert_flip_char(tty, 0, TTY_PARITY);
+	}
+
+	if (error_f)
+		msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS);
+
+	if (msm_uport->clk_req_off_state == CLK_REQ_OFF_FLUSH_ISSUED)
+		msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_FLUSHED;
+
+	flush = msm_uport->rx.flush;
+	if (flush == FLUSH_IGNORE)
+		msm_hs_start_rx_locked(uport);
+	if (flush == FLUSH_STOP)
+		msm_uport->rx.flush = FLUSH_SHUTDOWN;
+	if (flush >= FLUSH_DATA_INVALID)
+		goto out;
+
+	rx_count = msm_hs_read(uport, UARTDM_RX_TOTAL_SNAP_ADDR);
+
+	if (0 != (uport->read_status_mask & CREAD)) {
+		retval = tty_insert_flip_string(tty, msm_uport->rx.buffer,
+						rx_count);
+		BUG_ON(retval != rx_count);
+	}
+
+	msm_hs_start_rx_locked(uport);
+
+out:
+	clk_disable(msm_uport->clk);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	if (flush < FLUSH_DATA_INVALID)
+		queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work);
+}
+
+static void msm_hs_tty_flip_buffer_work(struct work_struct *work)
+{
+	struct msm_hs_port *msm_uport =
+			container_of(work, struct msm_hs_port, rx.tty_work);
+	struct tty_struct *tty = msm_uport->uport.state->port.tty;
+
+	tty_flip_buffer_push(tty);
+}
+
+/*
+ *  Standard API, Current states of modem control inputs
+ *
+ * Since CTS can be handled entirely by HARDWARE we always
+ * indicate clear to send and count on the TX FIFO to block when
+ * it fills up.
+ *
+ * - TIOCM_DCD
+ * - TIOCM_CTS
+ * - TIOCM_DSR
+ * - TIOCM_RI
+ *  (Unsupported) DCD and DSR will return them high. RI will return low.
+ */
+static unsigned int msm_hs_get_mctrl_locked(struct uart_port *uport)
+{
+	return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS;
+}
+
+/*
+ * True enables UART auto RFR, which indicates we are ready for data if the RX
+ * buffer is not full. False disables auto RFR, and deasserts RFR to indicate
+ * we are not ready for data. Must be called with UART clock on.
+ */
+static void set_rfr_locked(struct uart_port *uport, int auto_rfr)
+{
+	unsigned int data;
+
+	data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+
+	if (auto_rfr) {
+		/* enable auto ready-for-receiving */
+		data |= UARTDM_MR1_RX_RDY_CTL_BMSK;
+		msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+	} else {
+		/* disable auto ready-for-receiving */
+		data &= ~UARTDM_MR1_RX_RDY_CTL_BMSK;
+		msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+		/* RFR is active low, set high */
+		msm_hs_write(uport, UARTDM_CR_ADDR, RFR_HIGH);
+	}
+}
+
+/*
+ *  Standard API, used to set or clear RFR
+ */
+static void msm_hs_set_mctrl_locked(struct uart_port *uport,
+				    unsigned int mctrl)
+{
+	unsigned int auto_rfr;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	auto_rfr = TIOCM_RTS & mctrl ? 1 : 0;
+	set_rfr_locked(uport, auto_rfr);
+
+	clk_disable(msm_uport->clk);
+}
+
+/* Standard API, Enable modem status (CTS) interrupt  */
+static void msm_hs_enable_ms_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	/* Enable DELTA_CTS Interrupt */
+	msm_uport->imr_reg |= UARTDM_ISR_DELTA_CTS_BMSK;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	clk_disable(msm_uport->clk);
+
+}
+
+/*
+ *  Standard API, Break Signal
+ *
+ * Control the transmission of a break signal. ctl eq 0 => break
+ * signal terminate ctl ne 0 => start break signal
+ */
+static void msm_hs_break_ctl(struct uart_port *uport, int ctl)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+	msm_hs_write(uport, UARTDM_CR_ADDR, ctl ? START_BREAK : STOP_BREAK);
+	clk_disable(msm_uport->clk);
+}
+
+static void msm_hs_config_port(struct uart_port *uport, int cfg_flags)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	if (cfg_flags & UART_CONFIG_TYPE) {
+		uport->type = PORT_MSM;
+		msm_hs_request_port(uport);
+	}
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+/*  Handle CTS changes (Called from interrupt handler) */
+static void msm_hs_handle_delta_cts(struct uart_port *uport)
+{
+	unsigned long flags;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	/* clear interrupt */
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS);
+	uport->icount.cts++;
+
+	clk_disable(msm_uport->clk);
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	/* clear the IOCTL TIOCMIWAIT if called */
+	wake_up_interruptible(&uport->state->port.delta_msr_wait);
+}
+
+/* check if the TX path is flushed, and if so clock off
+ * returns 0 did not clock off, need to retry (still sending final byte)
+ *        -1 did not clock off, do not retry
+ *         1 if we clocked off
+ */
+static int msm_hs_check_clock_off_locked(struct uart_port *uport)
+{
+	unsigned long sr_status;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct circ_buf *tx_buf = &uport->state->xmit;
+
+	/* Cancel if tx tty buffer is not empty, dma is in flight,
+	 * or tx fifo is not empty, or rx fifo is not empty */
+	if (msm_uport->clk_state != MSM_HS_CLK_REQUEST_OFF ||
+	    !uart_circ_empty(tx_buf) || msm_uport->tx.dma_in_flight ||
+	    (msm_uport->imr_reg & UARTDM_ISR_TXLEV_BMSK) ||
+	    !(msm_uport->imr_reg & UARTDM_ISR_RXLEV_BMSK))  {
+		return -1;
+	}
+
+	/* Make sure the uart is finished with the last byte */
+	sr_status = msm_hs_read(uport, UARTDM_SR_ADDR);
+	if (!(sr_status & UARTDM_SR_TXEMT_BMSK))
+		return 0;  /* retry */
+
+	/* Make sure forced RXSTALE flush complete */
+	switch (msm_uport->clk_req_off_state) {
+	case CLK_REQ_OFF_START:
+		msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_ISSUED;
+		msm_hs_write(uport, UARTDM_CR_ADDR, FORCE_STALE_EVENT);
+		return 0;  /* RXSTALE flush not complete - retry */
+	case CLK_REQ_OFF_RXSTALE_ISSUED:
+	case CLK_REQ_OFF_FLUSH_ISSUED:
+		return 0;  /* RXSTALE flush not complete - retry */
+	case CLK_REQ_OFF_RXSTALE_FLUSHED:
+		break;  /* continue */
+	}
+
+	if (msm_uport->rx.flush != FLUSH_SHUTDOWN) {
+		if (msm_uport->rx.flush == FLUSH_NONE)
+			msm_hs_stop_rx_locked(uport);
+		return 0;  /* come back later to really clock off */
+	}
+
+	/* we really want to clock off */
+	clk_disable(msm_uport->clk);
+	msm_uport->clk_state = MSM_HS_CLK_OFF;
+
+	if (use_low_power_rx_wakeup(msm_uport)) {
+		msm_uport->rx_wakeup.ignore = 1;
+		enable_irq(msm_uport->rx_wakeup.irq);
+	}
+	return 1;
+}
+
+static enum hrtimer_restart msm_hs_clk_off_retry(struct hrtimer *timer)
+{
+	unsigned long flags;
+	int ret = HRTIMER_NORESTART;
+	struct msm_hs_port *msm_uport = container_of(timer, struct msm_hs_port,
+						     clk_off_timer);
+	struct uart_port *uport = &msm_uport->uport;
+
+	spin_lock_irqsave(&uport->lock, flags);
+
+	if (!msm_hs_check_clock_off_locked(uport)) {
+		hrtimer_forward_now(timer, msm_uport->clk_off_delay);
+		ret = HRTIMER_RESTART;
+	}
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	return ret;
+}
+
+static irqreturn_t msm_hs_isr(int irq, void *dev)
+{
+	unsigned long flags;
+	unsigned long isr_status;
+	struct msm_hs_port *msm_uport = dev;
+	struct uart_port *uport = &msm_uport->uport;
+	struct circ_buf *tx_buf = &uport->state->xmit;
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct msm_hs_rx *rx = &msm_uport->rx;
+
+	spin_lock_irqsave(&uport->lock, flags);
+
+	isr_status = msm_hs_read(uport, UARTDM_MISR_ADDR);
+
+	/* Uart RX starting */
+	if (isr_status & UARTDM_ISR_RXLEV_BMSK) {
+		msm_uport->imr_reg &= ~UARTDM_ISR_RXLEV_BMSK;
+		msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+	}
+	/* Stale rx interrupt */
+	if (isr_status & UARTDM_ISR_RXSTALE_BMSK) {
+		msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE);
+		msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+
+		if (msm_uport->clk_req_off_state == CLK_REQ_OFF_RXSTALE_ISSUED)
+			msm_uport->clk_req_off_state =
+					CLK_REQ_OFF_FLUSH_ISSUED;
+		if (rx->flush == FLUSH_NONE) {
+			rx->flush = FLUSH_DATA_READY;
+			msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+		}
+	}
+	/* tx ready interrupt */
+	if (isr_status & UARTDM_ISR_TX_READY_BMSK) {
+		/* Clear  TX Ready */
+		msm_hs_write(uport, UARTDM_CR_ADDR, CLEAR_TX_READY);
+
+		if (msm_uport->clk_state == MSM_HS_CLK_REQUEST_OFF) {
+			msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK;
+			msm_hs_write(uport, UARTDM_IMR_ADDR,
+				     msm_uport->imr_reg);
+		}
+
+		/* Complete DMA TX transactions and submit new transactions */
+		tx_buf->tail = (tx_buf->tail + tx->tx_count) & ~UART_XMIT_SIZE;
+
+		tx->dma_in_flight = 0;
+
+		uport->icount.tx += tx->tx_count;
+		if (tx->tx_ready_int_en)
+			msm_hs_submit_tx_locked(uport);
+
+		if (uart_circ_chars_pending(tx_buf) < WAKEUP_CHARS)
+			uart_write_wakeup(uport);
+	}
+	if (isr_status & UARTDM_ISR_TXLEV_BMSK) {
+		/* TX FIFO is empty */
+		msm_uport->imr_reg &= ~UARTDM_ISR_TXLEV_BMSK;
+		msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+		if (!msm_hs_check_clock_off_locked(uport))
+			hrtimer_start(&msm_uport->clk_off_timer,
+				      msm_uport->clk_off_delay,
+				      HRTIMER_MODE_REL);
+	}
+
+	/* Change in CTS interrupt */
+	if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK)
+		msm_hs_handle_delta_cts(uport);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+void msm_hs_request_clock_off_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	if (msm_uport->clk_state == MSM_HS_CLK_ON) {
+		msm_uport->clk_state = MSM_HS_CLK_REQUEST_OFF;
+		msm_uport->clk_req_off_state = CLK_REQ_OFF_START;
+		if (!use_low_power_rx_wakeup(msm_uport))
+			set_rfr_locked(uport, 0);
+		msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK;
+		msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+	}
+}
+
+/**
+ * msm_hs_request_clock_off - request to (i.e. asynchronously) turn off uart
+ * clock once pending TX is flushed and Rx DMA command is terminated.
+ * @uport: uart_port structure for the device instance.
+ *
+ * This functions puts the device into a partially active low power mode. It
+ * waits to complete all pending tx transactions, flushes ongoing Rx DMA
+ * command and terminates UART side Rx transaction, puts UART HW in non DMA
+ * mode and then clocks off the device. A client calls this when no UART
+ * data is expected. msm_request_clock_on() must be called before any further
+ * UART can be sent or received.
+ */
+void msm_hs_request_clock_off(struct uart_port *uport)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	msm_hs_request_clock_off_locked(uport);
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+void msm_hs_request_clock_on_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	unsigned int data;
+
+	switch (msm_uport->clk_state) {
+	case MSM_HS_CLK_OFF:
+		clk_enable(msm_uport->clk);
+		disable_irq_nosync(msm_uport->rx_wakeup.irq);
+		/* fall-through */
+	case MSM_HS_CLK_REQUEST_OFF:
+		if (msm_uport->rx.flush == FLUSH_STOP ||
+		    msm_uport->rx.flush == FLUSH_SHUTDOWN) {
+			msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+			data = msm_hs_read(uport, UARTDM_DMEN_ADDR);
+			data |= UARTDM_RX_DM_EN_BMSK;
+			msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+		}
+		hrtimer_try_to_cancel(&msm_uport->clk_off_timer);
+		if (msm_uport->rx.flush == FLUSH_SHUTDOWN)
+			msm_hs_start_rx_locked(uport);
+		if (!use_low_power_rx_wakeup(msm_uport))
+			set_rfr_locked(uport, 1);
+		if (msm_uport->rx.flush == FLUSH_STOP)
+			msm_uport->rx.flush = FLUSH_IGNORE;
+		msm_uport->clk_state = MSM_HS_CLK_ON;
+		break;
+	case MSM_HS_CLK_ON:
+		break;
+	case MSM_HS_CLK_PORT_OFF:
+		break;
+	}
+}
+
+/**
+ * msm_hs_request_clock_on - Switch the device from partially active low
+ * power mode to fully active (i.e. clock on) mode.
+ * @uport: uart_port structure for the device.
+ *
+ * This function switches on the input clock, puts UART HW into DMA mode
+ * and enqueues an Rx DMA command if the device was in partially active
+ * mode. It has no effect if called with the device in inactive state.
+ */
+void msm_hs_request_clock_on(struct uart_port *uport)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	msm_hs_request_clock_on_locked(uport);
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev)
+{
+	unsigned int wakeup = 0;
+	unsigned long flags;
+	struct msm_hs_port *msm_uport = dev;
+	struct uart_port *uport = &msm_uport->uport;
+	struct tty_struct *tty = NULL;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	if (msm_uport->clk_state == MSM_HS_CLK_OFF) {
+		/* ignore the first irq - it is a pending irq that occured
+		 * before enable_irq() */
+		if (msm_uport->rx_wakeup.ignore)
+			msm_uport->rx_wakeup.ignore = 0;
+		else
+			wakeup = 1;
+	}
+
+	if (wakeup) {
+		/* the uart was clocked off during an rx, wake up and
+		 * optionally inject char into tty rx */
+		msm_hs_request_clock_on_locked(uport);
+		if (msm_uport->rx_wakeup.inject_rx) {
+			tty = uport->state->port.tty;
+			tty_insert_flip_char(tty,
+					     msm_uport->rx_wakeup.rx_to_inject,
+					     TTY_NORMAL);
+			queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work);
+		}
+	}
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static const char *msm_hs_type(struct uart_port *port)
+{
+	return (port->type == PORT_MSM) ? "MSM_HS_UART" : NULL;
+}
+
+/* Called when port is opened */
+static int msm_hs_startup(struct uart_port *uport)
+{
+	int ret;
+	int rfr_level;
+	unsigned long flags;
+	unsigned int data;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct circ_buf *tx_buf = &uport->state->xmit;
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct msm_hs_rx *rx = &msm_uport->rx;
+
+	rfr_level = uport->fifosize;
+	if (rfr_level > 16)
+		rfr_level -= 16;
+
+	tx->dma_base = dma_map_single(uport->dev, tx_buf->buf, UART_XMIT_SIZE,
+				      DMA_TO_DEVICE);
+
+	/* do not let tty layer execute RX in global workqueue, use a
+	 * dedicated workqueue managed by this driver */
+	uport->state->port.tty->low_latency = 1;
+
+	/* turn on uart clk */
+	ret = msm_hs_init_clk_locked(uport);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "Turning uartclk failed!\n");
+		goto err_msm_hs_init_clk;
+	}
+
+	/* Set auto RFR Level */
+	data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+	data &= ~UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK;
+	data &= ~UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK;
+	data |= (UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK & (rfr_level << 2));
+	data |= (UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK & rfr_level);
+	msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+
+	/* Make sure RXSTALE count is non-zero */
+	data = msm_hs_read(uport, UARTDM_IPR_ADDR);
+	if (!data) {
+		data |= 0x1f & UARTDM_IPR_STALE_LSB_BMSK;
+		msm_hs_write(uport, UARTDM_IPR_ADDR, data);
+	}
+
+	/* Enable Data Mover Mode */
+	data = UARTDM_TX_DM_EN_BMSK | UARTDM_RX_DM_EN_BMSK;
+	msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+
+	/* Reset TX */
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_BREAK_INT);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RFR_LOW);
+	/* Turn on Uart Receiver */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_EN_BMSK);
+
+	/* Turn on Uart Transmitter */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_EN_BMSK);
+
+	/* Initialize the tx */
+	tx->tx_ready_int_en = 0;
+	tx->dma_in_flight = 0;
+
+	tx->xfer.complete_func = msm_hs_dmov_tx_callback;
+	tx->xfer.execute_func = NULL;
+
+	tx->command_ptr->cmd = CMD_LC |
+	    CMD_DST_CRCI(msm_uport->dma_tx_crci) | CMD_MODE_BOX;
+
+	tx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16)
+					   | (MSM_UARTDM_BURST_SIZE);
+
+	tx->command_ptr->row_offset = (MSM_UARTDM_BURST_SIZE << 16);
+
+	tx->command_ptr->dst_row_addr =
+	    msm_uport->uport.mapbase + UARTDM_TF_ADDR;
+
+
+	/* Turn on Uart Receive */
+	rx->xfer.complete_func = msm_hs_dmov_rx_callback;
+	rx->xfer.execute_func = NULL;
+
+	rx->command_ptr->cmd = CMD_LC |
+	    CMD_SRC_CRCI(msm_uport->dma_rx_crci) | CMD_MODE_BOX;
+
+	rx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16)
+					   | (MSM_UARTDM_BURST_SIZE);
+	rx->command_ptr->row_offset =  MSM_UARTDM_BURST_SIZE;
+	rx->command_ptr->src_row_addr = uport->mapbase + UARTDM_RF_ADDR;
+
+
+	msm_uport->imr_reg |= UARTDM_ISR_RXSTALE_BMSK;
+	/* Enable reading the current CTS, no harm even if CTS is ignored */
+	msm_uport->imr_reg |= UARTDM_ISR_CURRENT_CTS_BMSK;
+
+	msm_hs_write(uport, UARTDM_TFWR_ADDR, 0);  /* TXLEV on empty TX fifo */
+
+
+	ret = request_irq(uport->irq, msm_hs_isr, IRQF_TRIGGER_HIGH,
+			  "msm_hs_uart", msm_uport);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "Request msm_hs_uart IRQ failed!\n");
+		goto err_request_irq;
+	}
+	if (use_low_power_rx_wakeup(msm_uport)) {
+		ret = request_irq(msm_uport->rx_wakeup.irq,
+				  msm_hs_rx_wakeup_isr,
+				  IRQF_TRIGGER_FALLING,
+				  "msm_hs_rx_wakeup", msm_uport);
+		if (unlikely(ret)) {
+			printk(KERN_ERR "Request msm_hs_rx_wakeup IRQ failed!\n");
+			free_irq(uport->irq, msm_uport);
+			goto err_request_irq;
+		}
+		disable_irq(msm_uport->rx_wakeup.irq);
+	}
+
+	spin_lock_irqsave(&uport->lock, flags);
+
+	msm_hs_write(uport, UARTDM_RFWR_ADDR, 0);
+	msm_hs_start_rx_locked(uport);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+	ret = pm_runtime_set_active(uport->dev);
+	if (ret)
+		dev_err(uport->dev, "set active error:%d\n", ret);
+	pm_runtime_enable(uport->dev);
+
+	return 0;
+
+err_request_irq:
+err_msm_hs_init_clk:
+	dma_unmap_single(uport->dev, tx->dma_base,
+				UART_XMIT_SIZE, DMA_TO_DEVICE);
+	return ret;
+}
+
+/* Initialize tx and rx data structures */
+static int __devinit uartdm_init_port(struct uart_port *uport)
+{
+	int ret = 0;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct msm_hs_rx *rx = &msm_uport->rx;
+
+	/* Allocate the command pointer. Needs to be 64 bit aligned */
+	tx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA);
+	if (!tx->command_ptr)
+		return -ENOMEM;
+
+	tx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+	if (!tx->command_ptr_ptr) {
+		ret = -ENOMEM;
+		goto err_tx_command_ptr_ptr;
+	}
+
+	tx->mapped_cmd_ptr = dma_map_single(uport->dev, tx->command_ptr,
+					    sizeof(dmov_box), DMA_TO_DEVICE);
+	tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev,
+						tx->command_ptr_ptr,
+						sizeof(u32 *), DMA_TO_DEVICE);
+	tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr);
+
+	init_waitqueue_head(&rx->wait);
+
+	rx->pool = dma_pool_create("rx_buffer_pool", uport->dev,
+				   UARTDM_RX_BUF_SIZE, 16, 0);
+	if (!rx->pool) {
+		pr_err("%s(): cannot allocate rx_buffer_pool", __func__);
+		ret = -ENOMEM;
+		goto err_dma_pool_create;
+	}
+
+	rx->buffer = dma_pool_alloc(rx->pool, GFP_KERNEL, &rx->rbuffer);
+	if (!rx->buffer) {
+		pr_err("%s(): cannot allocate rx->buffer", __func__);
+		ret = -ENOMEM;
+		goto err_dma_pool_alloc;
+	}
+
+	/* Allocate the command pointer. Needs to be 64 bit aligned */
+	rx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA);
+	if (!rx->command_ptr) {
+		pr_err("%s(): cannot allocate rx->command_ptr", __func__);
+		ret = -ENOMEM;
+		goto err_rx_command_ptr;
+	}
+
+	rx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+	if (!rx->command_ptr_ptr) {
+		pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__);
+		ret = -ENOMEM;
+		goto err_rx_command_ptr_ptr;
+	}
+
+	rx->command_ptr->num_rows = ((UARTDM_RX_BUF_SIZE >> 4) << 16) |
+					 (UARTDM_RX_BUF_SIZE >> 4);
+
+	rx->command_ptr->dst_row_addr = rx->rbuffer;
+
+	rx->mapped_cmd_ptr = dma_map_single(uport->dev, rx->command_ptr,
+					    sizeof(dmov_box), DMA_TO_DEVICE);
+
+	*rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr);
+
+	rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr,
+					    sizeof(u32 *), DMA_TO_DEVICE);
+	rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr);
+
+	INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work);
+
+	return ret;
+
+err_rx_command_ptr_ptr:
+	kfree(rx->command_ptr);
+err_rx_command_ptr:
+	dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer,
+						msm_uport->rx.rbuffer);
+err_dma_pool_alloc:
+	dma_pool_destroy(msm_uport->rx.pool);
+err_dma_pool_create:
+	dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr,
+				sizeof(u32 *), DMA_TO_DEVICE);
+	dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr,
+				sizeof(dmov_box), DMA_TO_DEVICE);
+	kfree(msm_uport->tx.command_ptr_ptr);
+err_tx_command_ptr_ptr:
+	kfree(msm_uport->tx.command_ptr);
+	return ret;
+}
+
+static int __devinit msm_hs_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct uart_port *uport;
+	struct msm_hs_port *msm_uport;
+	struct resource *resource;
+	const struct msm_serial_hs_platform_data *pdata =
+						pdev->dev.platform_data;
+
+	if (pdev->id < 0 || pdev->id >= UARTDM_NR) {
+		printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	msm_uport = &q_uart_port[pdev->id];
+	uport = &msm_uport->uport;
+
+	uport->dev = &pdev->dev;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!resource))
+		return -ENXIO;
+
+	uport->mapbase = resource->start;
+	uport->irq = platform_get_irq(pdev, 0);
+	if (unlikely(uport->irq < 0))
+		return -ENXIO;
+
+	if (unlikely(set_irq_wake(uport->irq, 1)))
+		return -ENXIO;
+
+	if (pdata == NULL || pdata->rx_wakeup_irq < 0)
+		msm_uport->rx_wakeup.irq = -1;
+	else {
+		msm_uport->rx_wakeup.irq = pdata->rx_wakeup_irq;
+		msm_uport->rx_wakeup.ignore = 1;
+		msm_uport->rx_wakeup.inject_rx = pdata->inject_rx_on_wakeup;
+		msm_uport->rx_wakeup.rx_to_inject = pdata->rx_to_inject;
+
+		if (unlikely(msm_uport->rx_wakeup.irq < 0))
+			return -ENXIO;
+
+		if (unlikely(set_irq_wake(msm_uport->rx_wakeup.irq, 1)))
+			return -ENXIO;
+	}
+
+	if (pdata == NULL)
+		msm_uport->exit_lpm_cb = NULL;
+	else
+		msm_uport->exit_lpm_cb = pdata->exit_lpm_cb;
+
+	resource = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+						"uartdm_channels");
+	if (unlikely(!resource))
+		return -ENXIO;
+
+	msm_uport->dma_tx_channel = resource->start;
+	msm_uport->dma_rx_channel = resource->end;
+
+	resource = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+						"uartdm_crci");
+	if (unlikely(!resource))
+		return -ENXIO;
+
+	msm_uport->dma_tx_crci = resource->start;
+	msm_uport->dma_rx_crci = resource->end;
+
+	uport->iotype = UPIO_MEM;
+	uport->fifosize = UART_FIFOSIZE;
+	uport->ops = &msm_hs_ops;
+	uport->flags = UPF_BOOT_AUTOCONF;
+	uport->uartclk = UARTCLK;
+	msm_uport->imr_reg = 0x0;
+	msm_uport->clk = clk_get(&pdev->dev, "uartdm_clk");
+	if (IS_ERR(msm_uport->clk))
+		return PTR_ERR(msm_uport->clk);
+
+	ret = uartdm_init_port(uport);
+	if (unlikely(ret))
+		return ret;
+
+	msm_uport->clk_state = MSM_HS_CLK_PORT_OFF;
+	hrtimer_init(&msm_uport->clk_off_timer, CLOCK_MONOTONIC,
+		     HRTIMER_MODE_REL);
+	msm_uport->clk_off_timer.function = msm_hs_clk_off_retry;
+	msm_uport->clk_off_delay = ktime_set(0, 1000000);  /* 1ms */
+
+	uport->line = pdev->id;
+	return uart_add_one_port(&msm_hs_driver, uport);
+}
+
+static int __init msm_serial_hs_init(void)
+{
+	int ret, i;
+
+	/* Init all UARTS as non-configured */
+	for (i = 0; i < UARTDM_NR; i++)
+		q_uart_port[i].uport.type = PORT_UNKNOWN;
+
+	msm_hs_workqueue = create_singlethread_workqueue("msm_serial_hs");
+	if (unlikely(!msm_hs_workqueue))
+		return -ENOMEM;
+
+	ret = uart_register_driver(&msm_hs_driver);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "%s failed to load\n", __func__);
+		goto err_uart_register_driver;
+	}
+
+	ret = platform_driver_register(&msm_serial_hs_platform_driver);
+	if (ret) {
+		printk(KERN_ERR "%s failed to load\n", __func__);
+		goto err_platform_driver_register;
+	}
+
+	return ret;
+
+err_platform_driver_register:
+	uart_unregister_driver(&msm_hs_driver);
+err_uart_register_driver:
+	destroy_workqueue(msm_hs_workqueue);
+	return ret;
+}
+module_init(msm_serial_hs_init);
+
+/*
+ *  Called by the upper layer when port is closed.
+ *     - Disables the port
+ *     - Unhook the ISR
+ */
+static void msm_hs_shutdown(struct uart_port *uport)
+{
+	unsigned long flags;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	BUG_ON(msm_uport->rx.flush < FLUSH_STOP);
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	/* Disable the transmitter */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_DISABLE_BMSK);
+	/* Disable the receiver */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_DISABLE_BMSK);
+
+	pm_runtime_disable(uport->dev);
+	pm_runtime_set_suspended(uport->dev);
+
+	/* Free the interrupt */
+	free_irq(uport->irq, msm_uport);
+	if (use_low_power_rx_wakeup(msm_uport))
+		free_irq(msm_uport->rx_wakeup.irq, msm_uport);
+
+	msm_uport->imr_reg = 0;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	wait_event(msm_uport->rx.wait, msm_uport->rx.flush == FLUSH_SHUTDOWN);
+
+	clk_disable(msm_uport->clk);  /* to balance local clk_enable() */
+	if (msm_uport->clk_state != MSM_HS_CLK_OFF)
+		clk_disable(msm_uport->clk);  /* to balance clk_state */
+	msm_uport->clk_state = MSM_HS_CLK_PORT_OFF;
+
+	dma_unmap_single(uport->dev, msm_uport->tx.dma_base,
+			 UART_XMIT_SIZE, DMA_TO_DEVICE);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	if (cancel_work_sync(&msm_uport->rx.tty_work))
+		msm_hs_tty_flip_buffer_work(&msm_uport->rx.tty_work);
+}
+
+static void __exit msm_serial_hs_exit(void)
+{
+	flush_workqueue(msm_hs_workqueue);
+	destroy_workqueue(msm_hs_workqueue);
+	platform_driver_unregister(&msm_serial_hs_platform_driver);
+	uart_unregister_driver(&msm_hs_driver);
+}
+module_exit(msm_serial_hs_exit);
+
+#ifdef CONFIG_PM_RUNTIME
+static int msm_hs_runtime_idle(struct device *dev)
+{
+	/*
+	 * returning success from idle results in runtime suspend to be
+	 * called
+	 */
+	return 0;
+}
+
+static int msm_hs_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev, struct
+						    platform_device, dev);
+	struct msm_hs_port *msm_uport = &q_uart_port[pdev->id];
+
+	msm_hs_request_clock_on(&msm_uport->uport);
+	return 0;
+}
+
+static int msm_hs_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev, struct
+						    platform_device, dev);
+	struct msm_hs_port *msm_uport = &q_uart_port[pdev->id];
+
+	msm_hs_request_clock_off(&msm_uport->uport);
+	return 0;
+}
+#else
+#define msm_hs_runtime_idle NULL
+#define msm_hs_runtime_resume NULL
+#define msm_hs_runtime_suspend NULL
+#endif
+
+static const struct dev_pm_ops msm_hs_dev_pm_ops = {
+	.runtime_suspend = msm_hs_runtime_suspend,
+	.runtime_resume  = msm_hs_runtime_resume,
+	.runtime_idle    = msm_hs_runtime_idle,
+};
+
+static struct platform_driver msm_serial_hs_platform_driver = {
+	.probe = msm_hs_probe,
+	.remove = __devexit_p(msm_hs_remove),
+	.driver = {
+		.name = "msm_serial_hs",
+		.owner = THIS_MODULE,
+		.pm   = &msm_hs_dev_pm_ops,
+	},
+};
+
+static struct uart_driver msm_hs_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "msm_serial_hs",
+	.dev_name = "ttyHS",
+	.nr = UARTDM_NR,
+	.cons = 0,
+};
+
+static struct uart_ops msm_hs_ops = {
+	.tx_empty = msm_hs_tx_empty,
+	.set_mctrl = msm_hs_set_mctrl_locked,
+	.get_mctrl = msm_hs_get_mctrl_locked,
+	.stop_tx = msm_hs_stop_tx_locked,
+	.start_tx = msm_hs_start_tx_locked,
+	.stop_rx = msm_hs_stop_rx_locked,
+	.enable_ms = msm_hs_enable_ms_locked,
+	.break_ctl = msm_hs_break_ctl,
+	.startup = msm_hs_startup,
+	.shutdown = msm_hs_shutdown,
+	.set_termios = msm_hs_set_termios,
+	.pm = msm_hs_pm,
+	.type = msm_hs_type,
+	.config_port = msm_hs_config_port,
+	.release_port = msm_hs_release_port,
+	.request_port = msm_hs_request_port,
+};
+
+MODULE_DESCRIPTION("High Speed UART Driver for the MSM chipset");
+MODULE_VERSION("1.2");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c
new file mode 100644
index 000000000000..beeff1e86093
--- /dev/null
+++ b/drivers/tty/serial/msm_smd_tty.c
@@ -0,0 +1,236 @@
+/* drivers/tty/serial/msm_smd_tty.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+
+#include <mach/msm_smd.h>
+
+#define MAX_SMD_TTYS 32
+
+struct smd_tty_info {
+	struct tty_port port;
+	smd_channel_t *ch;
+};
+
+struct smd_tty_channel_desc {
+	int id;
+	const char *name;
+};
+
+static struct smd_tty_info smd_tty[MAX_SMD_TTYS];
+
+static const struct smd_tty_channel_desc smd_default_tty_channels[] = {
+	{ .id = 0, .name = "SMD_DS" },
+	{ .id = 27, .name = "SMD_GPSNMEA" },
+};
+
+static const struct smd_tty_channel_desc *smd_tty_channels =
+		smd_default_tty_channels;
+static int smd_tty_channels_len = ARRAY_SIZE(smd_default_tty_channels);
+
+static void smd_tty_notify(void *priv, unsigned event)
+{
+	unsigned char *ptr;
+	int avail;
+	struct smd_tty_info *info = priv;
+	struct tty_struct *tty;
+
+	if (event != SMD_EVENT_DATA)
+		return;
+
+	tty = tty_port_tty_get(&info->port);
+	if (!tty)
+		return;
+
+	for (;;) {
+		if (test_bit(TTY_THROTTLED, &tty->flags))
+			break;
+		avail = smd_read_avail(info->ch);
+		if (avail == 0)
+			break;
+
+		avail = tty_prepare_flip_string(tty, &ptr, avail);
+
+		if (smd_read(info->ch, ptr, avail) != avail) {
+			/* shouldn't be possible since we're in interrupt
+			** context here and nobody else could 'steal' our
+			** characters.
+			*/
+			pr_err("OOPS - smd_tty_buffer mismatch?!");
+		}
+
+		tty_flip_buffer_push(tty);
+	}
+
+	/* XXX only when writable and necessary */
+	tty_wakeup(tty);
+	tty_kref_put(tty);
+}
+
+static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty)
+{
+	int i, res = 0;
+	int n = tty->index;
+	const char *name = NULL;
+	struct smd_tty_info *info = smd_tty + n;
+
+	for (i = 0; i < smd_tty_channels_len; i++) {
+		if (smd_tty_channels[i].id == n) {
+			name = smd_tty_channels[i].name;
+			break;
+		}
+	}
+	if (!name)
+		return -ENODEV;
+
+	if (info->ch)
+		smd_kick(info->ch);
+	else
+		res = smd_open(name, &info->ch, info, smd_tty_notify);
+
+	if (!res)
+		tty->driver_data = info;
+
+	return res;
+}
+
+static void smd_tty_port_shutdown(struct tty_port *tport)
+{
+	struct smd_tty_info *info;
+	struct tty_struct *tty = tty_port_tty_get(tport);
+
+	info = tty->driver_data;
+	if (info->ch) {
+		smd_close(info->ch);
+		info->ch = 0;
+	}
+
+	tty->driver_data = 0;
+	tty_kref_put(tty);
+}
+
+static int smd_tty_open(struct tty_struct *tty, struct file *f)
+{
+	struct smd_tty_info *info = smd_tty + tty->index;
+
+	return tty_port_open(&info->port, tty, f);
+}
+
+static void smd_tty_close(struct tty_struct *tty, struct file *f)
+{
+	struct smd_tty_info *info = tty->driver_data;
+
+	tty_port_close(&info->port, tty, f);
+}
+
+static int smd_tty_write(struct tty_struct *tty,
+			 const unsigned char *buf, int len)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	int avail;
+
+	/* if we're writing to a packet channel we will
+	** never be able to write more data than there
+	** is currently space for
+	*/
+	avail = smd_write_avail(info->ch);
+	if (len > avail)
+		len = avail;
+
+	return smd_write(info->ch, buf, len);
+}
+
+static int smd_tty_write_room(struct tty_struct *tty)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	return smd_write_avail(info->ch);
+}
+
+static int smd_tty_chars_in_buffer(struct tty_struct *tty)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	return smd_read_avail(info->ch);
+}
+
+static void smd_tty_unthrottle(struct tty_struct *tty)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	smd_kick(info->ch);
+}
+
+static const struct tty_port_operations smd_tty_port_ops = {
+	.shutdown = smd_tty_port_shutdown,
+	.activate = smd_tty_port_activate,
+};
+
+static const struct tty_operations smd_tty_ops = {
+	.open = smd_tty_open,
+	.close = smd_tty_close,
+	.write = smd_tty_write,
+	.write_room = smd_tty_write_room,
+	.chars_in_buffer = smd_tty_chars_in_buffer,
+	.unthrottle = smd_tty_unthrottle,
+};
+
+static struct tty_driver *smd_tty_driver;
+
+static int __init smd_tty_init(void)
+{
+	int ret, i;
+
+	smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS);
+	if (smd_tty_driver == 0)
+		return -ENOMEM;
+
+	smd_tty_driver->owner = THIS_MODULE;
+	smd_tty_driver->driver_name = "smd_tty_driver";
+	smd_tty_driver->name = "smd";
+	smd_tty_driver->major = 0;
+	smd_tty_driver->minor_start = 0;
+	smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	smd_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+	smd_tty_driver->init_termios = tty_std_termios;
+	smd_tty_driver->init_termios.c_iflag = 0;
+	smd_tty_driver->init_termios.c_oflag = 0;
+	smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
+	smd_tty_driver->init_termios.c_lflag = 0;
+	smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS |
+		TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	tty_set_operations(smd_tty_driver, &smd_tty_ops);
+
+	ret = tty_register_driver(smd_tty_driver);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < smd_tty_channels_len; i++) {
+		tty_port_init(&smd_tty[smd_tty_channels[i].id].port);
+		smd_tty[smd_tty_channels[i].id].port.ops = &smd_tty_port_ops;
+		tty_register_device(smd_tty_driver, smd_tty_channels[i].id, 0);
+	}
+
+	return 0;
+}
+
+module_init(smd_tty_init);
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 5c7abe4c94dd..0e8eec516df4 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -80,14 +80,16 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
 /*
  * Try to register a serial port
  */
-static int __devinit of_platform_serial_probe(struct platform_device *ofdev,
-						const struct of_device_id *id)
+static int __devinit of_platform_serial_probe(struct platform_device *ofdev)
 {
 	struct of_serial_info *info;
 	struct uart_port port;
 	int port_type;
 	int ret;
 
+	if (!ofdev->dev.of_match)
+		return -EINVAL;
+
 	if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
 		return -EBUSY;
 
@@ -95,7 +97,7 @@ static int __devinit of_platform_serial_probe(struct platform_device *ofdev,
 	if (info == NULL)
 		return -ENOMEM;
 
-	port_type = (unsigned long)id->data;
+	port_type = (unsigned long)ofdev->dev.of_match->data;
 	ret = of_platform_serial_setup(ofdev, port_type, &port);
 	if (ret)
 		goto out;
@@ -160,21 +162,21 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
  * A few common types, add more as needed.
  */
 static struct of_device_id __devinitdata of_platform_serial_table[] = {
-	{ .type = "serial", .compatible = "ns8250",   .data = (void *)PORT_8250, },
-	{ .type = "serial", .compatible = "ns16450",  .data = (void *)PORT_16450, },
-	{ .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
-	{ .type = "serial", .compatible = "ns16550",  .data = (void *)PORT_16550, },
-	{ .type = "serial", .compatible = "ns16750",  .data = (void *)PORT_16750, },
-	{ .type = "serial", .compatible = "ns16850",  .data = (void *)PORT_16850, },
+	{ .compatible = "ns8250",   .data = (void *)PORT_8250, },
+	{ .compatible = "ns16450",  .data = (void *)PORT_16450, },
+	{ .compatible = "ns16550a", .data = (void *)PORT_16550A, },
+	{ .compatible = "ns16550",  .data = (void *)PORT_16550, },
+	{ .compatible = "ns16750",  .data = (void *)PORT_16750, },
+	{ .compatible = "ns16850",  .data = (void *)PORT_16850, },
 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	{ .type = "serial", .compatible = "ibm,qpace-nwp-serial",
-					.data = (void *)PORT_NWPSERIAL, },
+	{ .compatible = "ibm,qpace-nwp-serial",
+		.data = (void *)PORT_NWPSERIAL, },
 #endif
-	{ .type = "serial",			      .data = (void *)PORT_UNKNOWN, },
+	{ .type = "serial",         .data = (void *)PORT_UNKNOWN, },
 	{ /* end of list */ },
 };
 
-static struct of_platform_driver of_platform_serial_driver = {
+static struct platform_driver of_platform_serial_driver = {
 	.driver = {
 		.name = "of_serial",
 		.owner = THIS_MODULE,
@@ -186,13 +188,13 @@ static struct of_platform_driver of_platform_serial_driver = {
 
 static int __init of_platform_serial_init(void)
 {
-	return of_register_platform_driver(&of_platform_serial_driver);
+	return platform_driver_register(&of_platform_serial_driver);
 }
 module_init(of_platform_serial_init);
 
 static void __exit of_platform_serial_exit(void)
 {
-	return of_unregister_platform_driver(&of_platform_serial_driver);
+	return platform_driver_unregister(&of_platform_serial_driver);
 };
 module_exit(of_platform_serial_exit);
 
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 7f2f01058789..763537943a53 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -20,6 +20,10 @@
  * this driver as required for the omap-platform.
  */
 
+#if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
@@ -190,7 +194,6 @@ static inline void receive_chars(struct uart_omap_port *up, int *status)
 			if (up->port.line == up->port.cons->index) {
 				/* Recover the break flag from console xmit */
 				lsr |= up->lsr_break_flag;
-				up->lsr_break_flag = 0;
 			}
 #endif
 			if (lsr & UART_LSR_BI)
@@ -517,6 +520,9 @@ static int serial_omap_startup(struct uart_port *port)
 	up->ier = UART_IER_RLSI | UART_IER_RDI;
 	serial_out(up, UART_IER, up->ier);
 
+	/* Enable module level wake up */
+	serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
+
 	up->port_activity = jiffies;
 	return 0;
 }
@@ -824,9 +830,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_out(up, UART_EFR, efr);
 	serial_out(up, UART_LCR, 0);
-	/* Enable module level wake up */
-	serial_out(up, UART_OMAP_WER,
-		(state != 0) ? OMAP_UART_WER_MOD_WKUP : 0);
 }
 
 static void serial_omap_release_port(struct uart_port *port)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 70a61458ec42..a9ad7f33526d 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -21,6 +21,7 @@
 #include <linux/serial_core.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/dmi.h>
 
 #include <linux/dmaengine.h>
 #include <linux/pch_dma.h>
@@ -40,10 +41,11 @@ enum {
 
 #define PCH_UART_DRIVER_DEVICE "ttyPCH"
 
-#define PCH_UART_NR_GE_256FIFO		1
-#define PCH_UART_NR_GE_64FIFO		3
-#define PCH_UART_NR_GE	(PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO)
-#define PCH_UART_NR	PCH_UART_NR_GE
+/* Set the max number of UART port
+ * Intel EG20T PCH: 4 port
+ * OKI SEMICONDUCTOR ML7213 IOH: 3 port
+*/
+#define PCH_UART_NR	4
 
 #define PCH_UART_HANDLED_RX_INT	(1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
 #define PCH_UART_HANDLED_TX_INT	(1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
@@ -192,6 +194,8 @@ enum {
 #define PCH_UART_HAL_LOOP		(PCH_UART_MCR_LOOP)
 #define PCH_UART_HAL_AFE		(PCH_UART_MCR_AFE)
 
+#define PCI_VENDOR_ID_ROHM		0x10DB
+
 struct pch_uart_buffer {
 	unsigned char *buf;
 	int size;
@@ -215,6 +219,7 @@ struct eg20t_port {
 	struct pch_uart_buffer rxbuf;
 	unsigned int dmsr;
 	unsigned int fcr;
+	unsigned int mcr;
 	unsigned int use_dma;
 	unsigned int use_dma_flag;
 	struct dma_async_tx_descriptor	*desc_tx;
@@ -223,13 +228,44 @@ struct eg20t_port {
 	struct pch_dma_slave		param_rx;
 	struct dma_chan			*chan_tx;
 	struct dma_chan			*chan_rx;
-	struct scatterlist		sg_tx;
+	struct scatterlist		*sg_tx_p;
+	int				nent;
 	struct scatterlist		sg_rx;
 	int				tx_dma_use;
 	void				*rx_buf_virt;
 	dma_addr_t			rx_buf_dma;
 };
 
+/**
+ * struct pch_uart_driver_data - private data structure for UART-DMA
+ * @port_type:			The number of DMA channel
+ * @line_no:			UART port line number (0, 1, 2...)
+ */
+struct pch_uart_driver_data {
+	int port_type;
+	int line_no;
+};
+
+enum pch_uart_num_t {
+	pch_et20t_uart0 = 0,
+	pch_et20t_uart1,
+	pch_et20t_uart2,
+	pch_et20t_uart3,
+	pch_ml7213_uart0,
+	pch_ml7213_uart1,
+	pch_ml7213_uart2,
+};
+
+static struct pch_uart_driver_data drv_dat[] = {
+	[pch_et20t_uart0] = {PCH_UART_8LINE, 0},
+	[pch_et20t_uart1] = {PCH_UART_2LINE, 1},
+	[pch_et20t_uart2] = {PCH_UART_2LINE, 2},
+	[pch_et20t_uart3] = {PCH_UART_2LINE, 3},
+	[pch_ml7213_uart0] = {PCH_UART_8LINE, 0},
+	[pch_ml7213_uart1] = {PCH_UART_2LINE, 1},
+	[pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
+};
+
 static unsigned int default_baud = 9600;
 static const int trigger_level_256[4] = { 1, 64, 128, 224 };
 static const int trigger_level_64[4] = { 1, 16, 32, 56 };
@@ -278,7 +314,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
 
 	div = DIV_ROUND(priv->base_baud / 16, baud);
 	if (div < 0 || USHRT_MAX <= div) {
-		pr_err("Invalid Baud(div=0x%x)\n", div);
+		dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
 		return -EINVAL;
 	}
 
@@ -286,17 +322,17 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
 	dlm = ((unsigned int)div >> 8) & 0x00FFU;
 
 	if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
-		pr_err("Invalid parity(0x%x)\n", parity);
+		dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
 		return -EINVAL;
 	}
 
 	if (bits & ~PCH_UART_LCR_WLS) {
-		pr_err("Invalid bits(0x%x)\n", bits);
+		dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
 		return -EINVAL;
 	}
 
 	if (stb & ~PCH_UART_LCR_STB) {
-		pr_err("Invalid STB(0x%x)\n", stb);
+		dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
 		return -EINVAL;
 	}
 
@@ -304,7 +340,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
 	lcr |= bits;
 	lcr |= stb;
 
-	pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n",
+	dev_dbg(priv->port.dev, "%s:baud = %d, div = %04x, lcr = %02x (%lu)\n",
 		 __func__, baud, div, lcr, jiffies);
 	iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
 	iowrite8(dll, priv->membase + PCH_UART_DLL);
@@ -318,7 +354,8 @@ static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
 				    unsigned int flag)
 {
 	if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
-		pr_err("%s:Invalid flag(0x%x)\n", __func__, flag);
+		dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
+			__func__, flag);
 		return -EINVAL;
 	}
 
@@ -337,17 +374,20 @@ static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
 	u8 fcr;
 
 	if (dmamode & ~PCH_UART_FCR_DMS) {
-		pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode);
+		dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
+			__func__, dmamode);
 		return -EINVAL;
 	}
 
 	if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
-		pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size);
+		dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
+			__func__, fifo_size);
 		return -EINVAL;
 	}
 
 	if (trigger & ~PCH_UART_FCR_RFTL) {
-		pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger);
+		dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
+			__func__, trigger);
 		return -EINVAL;
 	}
 
@@ -386,7 +426,7 @@ static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
 	return get_msr(priv, priv->membase);
 }
 
-static int pch_uart_hal_write(struct eg20t_port *priv,
+static void pch_uart_hal_write(struct eg20t_port *priv,
 			      const unsigned char *buf, int tx_size)
 {
 	int i;
@@ -396,7 +436,6 @@ static int pch_uart_hal_write(struct eg20t_port *priv,
 		thr = buf[i++];
 		iowrite8(thr, priv->membase + PCH_UART_THR);
 	}
-	return i;
 }
 
 static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
@@ -452,7 +491,7 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
 	port = &priv->port;
 	tty = tty_port_tty_get(&port->state->port);
 	if (!tty) {
-		pr_debug("%s:tty is busy now", __func__);
+		dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
 		return -EBUSY;
 	}
 
@@ -469,8 +508,8 @@ static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
 	struct uart_port *port = &priv->port;
 
 	if (port->x_char) {
-		pr_debug("%s:X character send %02x (%lu)\n", __func__,
-			port->x_char, jiffies);
+		dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
+			__func__, port->x_char, jiffies);
 		buf[0] = port->x_char;
 		port->x_char = 0;
 		ret = 1;
@@ -490,7 +529,7 @@ static int dma_push_rx(struct eg20t_port *priv, int size)
 	port = &priv->port;
 	tty = tty_port_tty_get(&port->state->port);
 	if (!tty) {
-		pr_debug("%s:tty is busy now", __func__);
+		dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
 		return 0;
 	}
 
@@ -560,11 +599,13 @@ static void pch_request_dma(struct uart_port *port)
 	/* Set Tx DMA */
 	param = &priv->param_tx;
 	param->dma_dev = &dma_dev->dev;
-	param->chan_id = priv->port.line;
+	param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
+
 	param->tx_reg = port->mapbase + UART_TX;
 	chan = dma_request_channel(mask, filter, param);
 	if (!chan) {
-		pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__);
+		dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
+			__func__);
 		return;
 	}
 	priv->chan_tx = chan;
@@ -572,11 +613,13 @@ static void pch_request_dma(struct uart_port *port)
 	/* Set Rx DMA */
 	param = &priv->param_rx;
 	param->dma_dev = &dma_dev->dev;
-	param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */
+	param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
+
 	param->rx_reg = port->mapbase + UART_RX;
 	chan = dma_request_channel(mask, filter, param);
 	if (!chan) {
-		pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__);
+		dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
+			__func__);
 		dma_release_channel(priv->chan_tx);
 		return;
 	}
@@ -592,16 +635,20 @@ static void pch_dma_rx_complete(void *arg)
 	struct eg20t_port *priv = arg;
 	struct uart_port *port = &priv->port;
 	struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+	int count;
 
 	if (!tty) {
-		pr_debug("%s:tty is busy now", __func__);
+		dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
 		return;
 	}
 
-	if (dma_push_rx(priv, priv->trigger_level))
+	dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
+	count = dma_push_rx(priv, priv->trigger_level);
+	if (count)
 		tty_flip_buffer_push(tty);
-
 	tty_kref_put(tty);
+	async_tx_ack(priv->desc_rx);
+	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
 }
 
 static void pch_dma_tx_complete(void *arg)
@@ -609,16 +656,23 @@ static void pch_dma_tx_complete(void *arg)
 	struct eg20t_port *priv = arg;
 	struct uart_port *port = &priv->port;
 	struct circ_buf *xmit = &port->state->xmit;
+	struct scatterlist *sg = priv->sg_tx_p;
+	int i;
 
-	xmit->tail += sg_dma_len(&priv->sg_tx);
+	for (i = 0; i < priv->nent; i++, sg++) {
+		xmit->tail += sg_dma_len(sg);
+		port->icount.tx += sg_dma_len(sg);
+	}
 	xmit->tail &= UART_XMIT_SIZE - 1;
-	port->icount.tx += sg_dma_len(&priv->sg_tx);
-
 	async_tx_ack(priv->desc_tx);
+	dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
 	priv->tx_dma_use = 0;
+	priv->nent = 0;
+	kfree(priv->sg_tx_p);
+	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
 }
 
-static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size)
+static int pop_tx(struct eg20t_port *priv, int size)
 {
 	int count = 0;
 	struct uart_port *port = &priv->port;
@@ -631,13 +685,13 @@ static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size)
 		int cnt_to_end =
 		    CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 		int sz = min(size - count, cnt_to_end);
-		memcpy(&buf[count], &xmit->buf[xmit->tail], sz);
+		pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz);
 		xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
 		count += sz;
 	} while (!uart_circ_empty(xmit) && count < size);
 
 pop_tx_end:
-	pr_debug("%d characters. Remained %d characters. (%lu)\n",
+	dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n",
 		 count, size - count, jiffies);
 
 	return count;
@@ -679,7 +733,7 @@ static int dma_handle_rx(struct eg20t_port *priv)
 
 	sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
 
-	sg_dma_len(sg) = priv->fifo_size;
+	sg_dma_len(sg) = priv->trigger_level;
 
 	sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
 		     sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
@@ -689,7 +743,8 @@ static int dma_handle_rx(struct eg20t_port *priv)
 
 	desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx,
 			sg, 1, DMA_FROM_DEVICE,
-			DMA_PREP_INTERRUPT);
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
 	if (!desc)
 		return 0;
 
@@ -706,14 +761,14 @@ static unsigned int handle_tx(struct eg20t_port *priv)
 {
 	struct uart_port *port = &priv->port;
 	struct circ_buf *xmit = &port->state->xmit;
-	int ret;
 	int fifo_size;
 	int tx_size;
 	int size;
 	int tx_empty;
 
 	if (!priv->start_tx) {
-		pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+		dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
+			__func__, jiffies);
 		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 		priv->tx_empty = 1;
 		return 0;
@@ -728,17 +783,21 @@ static unsigned int handle_tx(struct eg20t_port *priv)
 		fifo_size--;
 	}
 	size = min(xmit->head - xmit->tail, fifo_size);
-	tx_size = pop_tx(priv, xmit->buf, size);
+	if (size < 0)
+		size = fifo_size;
+
+	tx_size = pop_tx(priv, size);
 	if (tx_size > 0) {
-		ret = pch_uart_hal_write(priv, xmit->buf, tx_size);
-		port->icount.tx += ret;
+		port->icount.tx += tx_size;
 		tx_empty = 0;
 	}
 
 	priv->tx_empty = tx_empty;
 
-	if (tx_empty)
+	if (tx_empty) {
 		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+		uart_write_wakeup(port);
+	}
 
 	return PCH_UART_HANDLED_TX_INT;
 }
@@ -747,14 +806,28 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
 {
 	struct uart_port *port = &priv->port;
 	struct circ_buf *xmit = &port->state->xmit;
-	struct scatterlist *sg = &priv->sg_tx;
+	struct scatterlist *sg;
 	int nent;
 	int fifo_size;
 	int tx_empty;
 	struct dma_async_tx_descriptor *desc;
+	int num;
+	int i;
+	int bytes;
+	int size;
+	int rem;
 
 	if (!priv->start_tx) {
-		pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+		dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
+			__func__, jiffies);
+		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+		priv->tx_empty = 1;
+		return 0;
+	}
+
+	if (priv->tx_dma_use) {
+		dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
+			__func__, jiffies);
 		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 		priv->tx_empty = 1;
 		return 0;
@@ -769,37 +842,73 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
 		fifo_size--;
 	}
 
-	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+	bytes = min((int)CIRC_CNT(xmit->head, xmit->tail,
+			     UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
+			     xmit->tail, UART_XMIT_SIZE));
+	if (!bytes) {
+		dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
+		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+		uart_write_wakeup(port);
+		return 0;
+	}
+
+	if (bytes > fifo_size) {
+		num = bytes / fifo_size + 1;
+		size = fifo_size;
+		rem = bytes % fifo_size;
+	} else {
+		num = 1;
+		size = bytes;
+		rem = bytes;
+	}
+
+	dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
+		__func__, num, size, rem);
 
 	priv->tx_dma_use = 1;
 
-	sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */
+	priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
 
-	sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf),
-		    UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK);
+	sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
+	sg = priv->sg_tx_p;
 
-	nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE);
+	for (i = 0; i < num; i++, sg++) {
+		if (i == (num - 1))
+			sg_set_page(sg, virt_to_page(xmit->buf),
+				    rem, fifo_size * i);
+		else
+			sg_set_page(sg, virt_to_page(xmit->buf),
+				    size, fifo_size * i);
+	}
+
+	sg = priv->sg_tx_p;
+	nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
 	if (!nent) {
-		pr_err("%s:dma_map_sg Failed\n", __func__);
+		dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
 		return 0;
 	}
-
-	sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
-	sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
-			      sg->offset;
-	sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail,
-			     UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
-			     xmit->tail, UART_XMIT_SIZE));
+	priv->nent = nent;
+
+	for (i = 0; i < nent; i++, sg++) {
+		sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
+			      fifo_size * i;
+		sg_dma_address(sg) = (sg_dma_address(sg) &
+				    ~(UART_XMIT_SIZE - 1)) + sg->offset;
+		if (i == (nent - 1))
+			sg_dma_len(sg) = rem;
+		else
+			sg_dma_len(sg) = size;
+	}
 
 	desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx,
-		sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+					priv->sg_tx_p, nent, DMA_TO_DEVICE,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
-		pr_err("%s:device_prep_slave_sg Failed\n", __func__);
+		dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n",
+			__func__);
 		return 0;
 	}
-
-	dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
-
+	dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
 	priv->desc_tx = desc;
 	desc->callback = pch_dma_tx_complete;
 	desc->callback_param = priv;
@@ -854,10 +963,16 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 			}
 			break;
 		case PCH_UART_IID_RDR:	/* Received Data Ready */
-			if (priv->use_dma)
+			if (priv->use_dma) {
+				pch_uart_hal_disable_interrupt(priv,
+							PCH_UART_HAL_RX_INT);
 				ret = dma_handle_rx(priv);
-			else
+				if (!ret)
+					pch_uart_hal_enable_interrupt(priv,
+							PCH_UART_HAL_RX_INT);
+			} else {
 				ret = handle_rx(priv);
+			}
 			break;
 		case PCH_UART_IID_RDR_TO:	/* Received Data Ready
 						   (FIFO Timeout) */
@@ -874,7 +989,8 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 			ret = PCH_UART_HANDLED_MS_INT;
 			break;
 		default:	/* Never junp to this label */
-			pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies);
+			dev_err(priv->port.dev, "%s:iid=%d (%lu)\n", __func__,
+				iid, jiffies);
 			ret = -1;
 			break;
 		}
@@ -932,7 +1048,6 @@ static unsigned int pch_uart_get_mctrl(struct uart_port *port)
 static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	u32 mcr = 0;
-	unsigned int dat;
 	struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
 
 	if (mctrl & TIOCM_DTR)
@@ -942,11 +1057,11 @@ static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	if (mctrl & TIOCM_LOOP)
 		mcr |= UART_MCR_LOOP;
 
-	if (mctrl) {
-		dat = pch_uart_get_mctrl(port);
-		dat |= mcr;
-		iowrite8(dat, priv->membase + UART_MCR);
-	}
+	if (priv->mcr & UART_MCR_AFE)
+		mcr |= UART_MCR_AFE;
+
+	if (mctrl)
+		iowrite8(mcr, priv->membase + UART_MCR);
 }
 
 static void pch_uart_stop_tx(struct uart_port *port)
@@ -963,9 +1078,13 @@ static void pch_uart_start_tx(struct uart_port *port)
 
 	priv = container_of(port, struct eg20t_port, port);
 
-	if (priv->use_dma)
-		if (priv->tx_dma_use)
+	if (priv->use_dma) {
+		if (priv->tx_dma_use) {
+			dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
+				__func__);
 			return;
+		}
+	}
 
 	priv->start_tx = 1;
 	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
@@ -1010,7 +1129,12 @@ static int pch_uart_startup(struct uart_port *port)
 
 	priv = container_of(port, struct eg20t_port, port);
 	priv->tx_empty = 1;
-	port->uartclk = priv->base_baud;
+
+	if (port->uartclk)
+		priv->base_baud = port->uartclk;
+	else
+		port->uartclk = priv->base_baud;
+
 	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
 	ret = pch_uart_hal_set_line(priv, default_baud,
 			      PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
@@ -1081,7 +1205,8 @@ static void pch_uart_shutdown(struct uart_port *port)
 	ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
 			      PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
 	if (ret)
-		pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
+		dev_err(priv->port.dev,
+			"pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
 
 	if (priv->use_dma_flag)
 		pch_free_dma(port);
@@ -1130,6 +1255,13 @@ static void pch_uart_set_termios(struct uart_port *port,
 	} else {
 		parity = PCH_UART_HAL_PARITY_NONE;
 	}
+
+	/* Only UART0 has auto hardware flow function */
+	if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
+		priv->mcr |= UART_MCR_AFE;
+	else
+		priv->mcr &= ~UART_MCR_AFE;
+
 	termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
 
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
@@ -1202,17 +1334,19 @@ static int pch_uart_verify_port(struct uart_port *port,
 
 	priv = container_of(port, struct eg20t_port, port);
 	if (serinfo->flags & UPF_LOW_LATENCY) {
-		pr_info("PCH UART : Use PIO Mode (without DMA)\n");
+		dev_info(priv->port.dev,
+			"PCH UART : Use PIO Mode (without DMA)\n");
 		priv->use_dma = 0;
 		serinfo->flags &= ~UPF_LOW_LATENCY;
 	} else {
 #ifndef CONFIG_PCH_DMA
-		pr_err("%s : PCH DMA is not Loaded.\n", __func__);
+		dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
+			__func__);
 		return -EOPNOTSUPP;
 #endif
 		priv->use_dma = 1;
 		priv->use_dma_flag = 1;
-		pr_info("PCH UART : Use DMA Mode\n");
+		dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
 	}
 
 	return 0;
@@ -1249,7 +1383,7 @@ static struct uart_driver pch_uart_driver = {
 };
 
 static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
-						int port_type)
+					     const struct pci_device_id *id)
 {
 	struct eg20t_port *priv;
 	int ret;
@@ -1257,7 +1391,11 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	unsigned int mapbase;
 	unsigned char *rxbuf;
 	int fifosize, base_baud;
-	static int num;
+	int port_type;
+	struct pch_uart_driver_data *board;
+
+	board = &drv_dat[id->driver_data];
+	port_type = board->port_type;
 
 	priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
 	if (priv == NULL)
@@ -1267,14 +1405,18 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	if (!rxbuf)
 		goto init_port_free_txbuf;
 
+	base_baud = 1843200; /* 1.8432MHz */
+
+	/* quirk for CM-iTC board */
+	if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+		base_baud = 192000000; /* 192.0MHz */
+
 	switch (port_type) {
 	case PORT_UNKNOWN:
-		fifosize = 256; /* UART0 */
-		base_baud = 1843200; /* 1.8432MHz */
+		fifosize = 256; /* EG20T/ML7213: UART0 */
 		break;
 	case PORT_8250:
-		fifosize = 64; /* UART1~3 */
-		base_baud = 1843200; /* 1.8432MHz */
+		fifosize = 64; /* EG20T:UART1~3  ML7213: UART1~2*/
 		break;
 	default:
 		dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
@@ -1302,11 +1444,14 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	priv->port.ops = &pch_uart_ops;
 	priv->port.flags = UPF_BOOT_AUTOCONF;
 	priv->port.fifosize = fifosize;
-	priv->port.line = num++;
+	priv->port.line = board->line_no;
 	priv->trigger = PCH_UART_HAL_TRIGGER_M;
 
+	spin_lock_init(&priv->port.lock);
+
 	pci_set_drvdata(pdev, priv);
 	pch_uart_hal_request(pdev, fifosize, base_baud);
+
 	ret = uart_add_one_port(&pch_uart_driver, &priv->port);
 	if (ret < 0)
 		goto init_port_hal_free;
@@ -1377,13 +1522,19 @@ static int pch_uart_pci_resume(struct pci_dev *pdev)
 
 static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
-	 .driver_data = PCH_UART_8LINE},
+	 .driver_data = pch_et20t_uart0},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
-	 .driver_data = PCH_UART_2LINE},
+	 .driver_data = pch_et20t_uart1},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
-	 .driver_data = PCH_UART_2LINE},
+	 .driver_data = pch_et20t_uart2},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
-	 .driver_data = PCH_UART_2LINE},
+	 .driver_data = pch_et20t_uart3},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
+	 .driver_data = pch_ml7213_uart0},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
+	 .driver_data = pch_ml7213_uart1},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
+	 .driver_data = pch_ml7213_uart2},
 	{0,},
 };
 
@@ -1397,7 +1548,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
 	if (ret < 0)
 		goto probe_error;
 
-	priv = pch_uart_init_port(pdev, id->driver_data);
+	priv = pch_uart_init_port(pdev, id);
 	if (!priv) {
 		ret = -EBUSY;
 		goto probe_disable_device;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 460a72d91bb7..733fe8e73f0f 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -905,7 +905,7 @@ static int uart_get_lsr_info(struct tty_struct *tty,
 	return put_user(result, value);
 }
 
-static int uart_tiocmget(struct tty_struct *tty, struct file *file)
+static int uart_tiocmget(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
 	struct tty_port *port = &state->port;
@@ -913,10 +913,8 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
 	int result = -EIO;
 
 	mutex_lock(&port->mutex);
-	if ((!file || !tty_hung_up_p(file)) &&
-	    !(tty->flags & (1 << TTY_IO_ERROR))) {
+	if (!(tty->flags & (1 << TTY_IO_ERROR))) {
 		result = uport->mctrl;
-
 		spin_lock_irq(&uport->lock);
 		result |= uport->ops->get_mctrl(uport);
 		spin_unlock_irq(&uport->lock);
@@ -927,8 +925,7 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
 }
 
 static int
-uart_tiocmset(struct tty_struct *tty, struct file *file,
-	      unsigned int set, unsigned int clear)
+uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
 {
 	struct uart_state *state = tty->driver_data;
 	struct uart_port *uport = state->uart_port;
@@ -936,8 +933,7 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
 	int ret = -EIO;
 
 	mutex_lock(&port->mutex);
-	if ((!file || !tty_hung_up_p(file)) &&
-	    !(tty->flags & (1 << TTY_IO_ERROR))) {
+	if (!(tty->flags & (1 << TTY_IO_ERROR))) {
 		uart_update_mctrl(uport, set, clear);
 		ret = 0;
 	}
@@ -1103,7 +1099,7 @@ static int uart_get_icount(struct tty_struct *tty,
  * Called via sys_ioctl.  We can use spin_lock_irq() here.
  */
 static int
-uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
+uart_ioctl(struct tty_struct *tty, unsigned int cmd,
 	   unsigned long arg)
 {
 	struct uart_state *state = tty->driver_data;
@@ -1156,7 +1152,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
 
 	mutex_lock(&port->mutex);
 
-	if (tty_hung_up_p(filp)) {
+	if (tty->flags & (1 << TTY_IO_ERROR)) {
 		ret = -EIO;
 		goto out_up;
 	}
@@ -2064,7 +2060,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 	/*
 	 * Re-enable the console device after suspending.
 	 */
-	if (console_suspend_enabled && uart_console(uport)) {
+	if (uart_console(uport)) {
 		/*
 		 * First try to use the console cflag setting.
 		 */
@@ -2077,9 +2073,9 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 		if (port->tty && port->tty->termios && termios.c_cflag == 0)
 			termios = *(port->tty->termios);
 
-		uart_change_pm(state, 0);
 		uport->ops->set_termios(uport, &termios, NULL);
-		console_start(uport->cons);
+		if (console_suspend_enabled)
+			console_start(uport->cons);
 	}
 
 	if (port->flags & ASYNC_SUSPENDED) {
diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/serial_cs.c
index 93760b2ea172..1ef4df9bf7e4 100644
--- a/drivers/tty/serial/serial_cs.c
+++ b/drivers/tty/serial/serial_cs.c
@@ -712,6 +712,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
 	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
 	PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
diff --git a/drivers/tty/serial/serial_lh7a40x.c b/drivers/tty/serial/serial_lh7a40x.c
deleted file mode 100644
index ea744707c4d6..000000000000
--- a/drivers/tty/serial/serial_lh7a40x.c
+++ /dev/null
@@ -1,682 +0,0 @@
-/* drivers/serial/serial_lh7a40x.c
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-/* Driver for Sharp LH7A40X embedded serial ports
- *
- *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *  Based on drivers/serial/amba.c, by Deep Blue Solutions Ltd.
- *
- *  ---
- *
- * This driver supports the embedded UARTs of the Sharp LH7A40X series
- * CPUs.  While similar to the 16550 and other UART chips, there is
- * nothing close to register compatibility.  Moreover, some of the
- * modem control lines are not available, either in the chip or they
- * are lacking in the board-level implementation.
- *
- * - Use of SIRDIS
- *   For simplicity, we disable the IR functions of any UART whenever
- *   we enable it.
- *
- */
-
-
-#if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#define DEV_MAJOR	204
-#define DEV_MINOR	16
-#define DEV_NR		3
-
-#define ISR_LOOP_LIMIT	256
-
-#define UR(p,o)	_UR ((p)->membase, o)
-#define _UR(b,o) (*((volatile unsigned int*)(((unsigned char*) b) + (o))))
-#define BIT_CLR(p,o,m)	UR(p,o) = UR(p,o) & (~(unsigned int)m)
-#define BIT_SET(p,o,m)	UR(p,o) = UR(p,o) | ( (unsigned int)m)
-
-#define UART_REG_SIZE	32
-
-#define UART_R_DATA	(0x00)
-#define UART_R_FCON	(0x04)
-#define UART_R_BRCON	(0x08)
-#define UART_R_CON	(0x0c)
-#define UART_R_STATUS	(0x10)
-#define UART_R_RAWISR	(0x14)
-#define UART_R_INTEN	(0x18)
-#define UART_R_ISR	(0x1c)
-
-#define UARTEN		(0x01)		/* UART enable */
-#define SIRDIS		(0x02)		/* Serial IR disable (UART1 only) */
-
-#define RxEmpty		(0x10)
-#define TxEmpty		(0x80)
-#define TxFull		(0x20)
-#define nRxRdy		RxEmpty
-#define nTxRdy		TxFull
-#define TxBusy		(0x08)
-
-#define RxBreak		(0x0800)
-#define RxOverrunError	(0x0400)
-#define RxParityError	(0x0200)
-#define RxFramingError	(0x0100)
-#define RxError     (RxBreak | RxOverrunError | RxParityError | RxFramingError)
-
-#define DCD		(0x04)
-#define DSR		(0x02)
-#define CTS		(0x01)
-
-#define RxInt		(0x01)
-#define TxInt		(0x02)
-#define ModemInt	(0x04)
-#define RxTimeoutInt	(0x08)
-
-#define MSEOI		(0x10)
-
-#define WLEN_8		(0x60)
-#define WLEN_7		(0x40)
-#define WLEN_6		(0x20)
-#define WLEN_5		(0x00)
-#define WLEN		(0x60)	/* Mask for all word-length bits */
-#define STP2		(0x08)
-#define PEN		(0x02)	/* Parity Enable */
-#define EPS		(0x04)	/* Even Parity Set */
-#define FEN		(0x10)	/* FIFO Enable */
-#define BRK		(0x01)	/* Send Break */
-
-
-struct uart_port_lh7a40x {
-	struct uart_port port;
-	unsigned int statusPrev; /* Most recently read modem status */
-};
-
-static void lh7a40xuart_stop_tx (struct uart_port* port)
-{
-	BIT_CLR (port, UART_R_INTEN, TxInt);
-}
-
-static void lh7a40xuart_start_tx (struct uart_port* port)
-{
-	BIT_SET (port, UART_R_INTEN, TxInt);
-
-	/* *** FIXME: do I need to check for startup of the
-		      transmitter?  The old driver did, but AMBA
-		      doesn't . */
-}
-
-static void lh7a40xuart_stop_rx (struct uart_port* port)
-{
-	BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt);
-}
-
-static void lh7a40xuart_enable_ms (struct uart_port* port)
-{
-	BIT_SET (port, UART_R_INTEN, ModemInt);
-}
-
-static void lh7a40xuart_rx_chars (struct uart_port* port)
-{
-	struct tty_struct* tty = port->state->port.tty;
-	int cbRxMax = 256;	/* (Gross) limit on receive */
-	unsigned int data;	/* Received data and status */
-	unsigned int flag;
-
-	while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) {
-		data = UR (port, UART_R_DATA);
-		flag = TTY_NORMAL;
-		++port->icount.rx;
-
-		if (unlikely(data & RxError)) {
-			if (data & RxBreak) {
-				data &= ~(RxFramingError | RxParityError);
-				++port->icount.brk;
-				if (uart_handle_break (port))
-					continue;
-			}
-			else if (data & RxParityError)
-				++port->icount.parity;
-			else if (data & RxFramingError)
-				++port->icount.frame;
-			if (data & RxOverrunError)
-				++port->icount.overrun;
-
-				/* Mask by termios, leave Rx'd byte */
-			data &= port->read_status_mask | 0xff;
-
-			if (data & RxBreak)
-				flag = TTY_BREAK;
-			else if (data & RxParityError)
-				flag = TTY_PARITY;
-			else if (data & RxFramingError)
-				flag = TTY_FRAME;
-		}
-
-		if (uart_handle_sysrq_char (port, (unsigned char) data))
-			continue;
-
-		uart_insert_char(port, data, RxOverrunError, data, flag);
-	}
-	tty_flip_buffer_push (tty);
-	return;
-}
-
-static void lh7a40xuart_tx_chars (struct uart_port* port)
-{
-	struct circ_buf* xmit = &port->state->xmit;
-	int cbTxMax = port->fifosize;
-
-	if (port->x_char) {
-		UR (port, UART_R_DATA) = port->x_char;
-		++port->icount.tx;
-		port->x_char = 0;
-		return;
-	}
-	if (uart_circ_empty (xmit) || uart_tx_stopped (port)) {
-		lh7a40xuart_stop_tx (port);
-		return;
-	}
-
-	/* Unlike the AMBA UART, the lh7a40x UART does not guarantee
-	   that at least half of the FIFO is empty.  Instead, we check
-	   status for every character.  Using the AMBA method causes
-	   the transmitter to drop characters. */
-
-	do {
-		UR (port, UART_R_DATA) = xmit->buf[xmit->tail];
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		++port->icount.tx;
-		if (uart_circ_empty(xmit))
-			break;
-	} while (!(UR (port, UART_R_STATUS) & nTxRdy)
-		 && cbTxMax--);
-
-	if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
-		uart_write_wakeup (port);
-
-	if (uart_circ_empty (xmit))
-		lh7a40xuart_stop_tx (port);
-}
-
-static void lh7a40xuart_modem_status (struct uart_port* port)
-{
-	unsigned int status = UR (port, UART_R_STATUS);
-	unsigned int delta
-		= status ^ ((struct uart_port_lh7a40x*) port)->statusPrev;
-
-	BIT_SET (port, UART_R_RAWISR, MSEOI); /* Clear modem status intr */
-
-	if (!delta)		/* Only happens if we missed 2 transitions */
-		return;
-
-	((struct uart_port_lh7a40x*) port)->statusPrev = status;
-
-	if (delta & DCD)
-		uart_handle_dcd_change (port, status & DCD);
-
-	if (delta & DSR)
-		++port->icount.dsr;
-
-	if (delta & CTS)
-		uart_handle_cts_change (port, status & CTS);
-
-	wake_up_interruptible (&port->state->port.delta_msr_wait);
-}
-
-static irqreturn_t lh7a40xuart_int (int irq, void* dev_id)
-{
-	struct uart_port* port = dev_id;
-	unsigned int cLoopLimit = ISR_LOOP_LIMIT;
-	unsigned int isr = UR (port, UART_R_ISR);
-
-
-	do {
-		if (isr & (RxInt | RxTimeoutInt))
-			lh7a40xuart_rx_chars(port);
-		if (isr & ModemInt)
-			lh7a40xuart_modem_status (port);
-		if (isr & TxInt)
-			lh7a40xuart_tx_chars (port);
-
-		if (--cLoopLimit == 0)
-			break;
-
-		isr = UR (port, UART_R_ISR);
-	} while (isr & (RxInt | TxInt | RxTimeoutInt));
-
-	return IRQ_HANDLED;
-}
-
-static unsigned int lh7a40xuart_tx_empty (struct uart_port* port)
-{
-	return (UR (port, UART_R_STATUS) & TxEmpty) ? TIOCSER_TEMT : 0;
-}
-
-static unsigned int lh7a40xuart_get_mctrl (struct uart_port* port)
-{
-	unsigned int result = 0;
-	unsigned int status = UR (port, UART_R_STATUS);
-
-	if (status & DCD)
-		result |= TIOCM_CAR;
-	if (status & DSR)
-		result |= TIOCM_DSR;
-	if (status & CTS)
-		result |= TIOCM_CTS;
-
-	return result;
-}
-
-static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl)
-{
-	/* None of the ports supports DTR. UART1 supports RTS through GPIO. */
-	/* Note, kernel appears to be setting DTR and RTS on console. */
-
-	/* *** FIXME: this deserves more work.  There's some work in
-	       tracing all of the IO pins. */
-#if 0
-	if( port->mapbase == UART1_PHYS) {
-		gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS);
-
-		if (mctrl & TIOCM_RTS)
-			gpio->pbdr &= ~GPIOB_UART1_RTS;
-		else
-			gpio->pbdr |= GPIOB_UART1_RTS;
-	}
-#endif
-}
-
-static void lh7a40xuart_break_ctl (struct uart_port* port, int break_state)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-	if (break_state == -1)
-		BIT_SET (port, UART_R_FCON, BRK); /* Assert break */
-	else
-		BIT_CLR (port, UART_R_FCON, BRK); /* Deassert break */
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int lh7a40xuart_startup (struct uart_port* port)
-{
-	int retval;
-
-	retval = request_irq (port->irq, lh7a40xuart_int, 0,
-			      "serial_lh7a40x", port);
-	if (retval)
-		return retval;
-
-				/* Initial modem control-line settings */
-	((struct uart_port_lh7a40x*) port)->statusPrev
-		= UR (port, UART_R_STATUS);
-
-	/* There is presently no configuration option to enable IR.
-	   Thus, we always disable it. */
-
-	BIT_SET (port, UART_R_CON, UARTEN | SIRDIS);
-	BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt);
-
-	return 0;
-}
-
-static void lh7a40xuart_shutdown (struct uart_port* port)
-{
-	free_irq (port->irq, port);
-	BIT_CLR (port, UART_R_FCON, BRK | FEN);
-	BIT_CLR (port, UART_R_CON, UARTEN);
-}
-
-static void lh7a40xuart_set_termios (struct uart_port* port,
-				     struct ktermios* termios,
-				     struct ktermios* old)
-{
-	unsigned int con;
-	unsigned int inten;
-	unsigned int fcon;
-	unsigned long flags;
-	unsigned int baud;
-	unsigned int quot;
-
-	baud = uart_get_baud_rate (port, termios, old, 8, port->uartclk/16);
-	quot = uart_get_divisor (port, baud); /* -1 performed elsewhere */
-
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		fcon = WLEN_5;
-		break;
-	case CS6:
-		fcon = WLEN_6;
-		break;
-	case CS7:
-		fcon = WLEN_7;
-		break;
-	case CS8:
-	default:
-		fcon = WLEN_8;
-		break;
-	}
-	if (termios->c_cflag & CSTOPB)
-		fcon |= STP2;
-	if (termios->c_cflag & PARENB) {
-		fcon |= PEN;
-		if (!(termios->c_cflag & PARODD))
-			fcon |= EPS;
-	}
-	if (port->fifosize > 1)
-		fcon |= FEN;
-
-	spin_lock_irqsave (&port->lock, flags);
-
-	uart_update_timeout (port, termios->c_cflag, baud);
-
-	port->read_status_mask = RxOverrunError;
-	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= RxFramingError | RxParityError;
-	if (termios->c_iflag & (BRKINT | PARMRK))
-		port->read_status_mask |= RxBreak;
-
-		/* Figure mask for status we ignore */
-	port->ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= RxFramingError | RxParityError;
-	if (termios->c_iflag & IGNBRK) {
-		port->ignore_status_mask |= RxBreak;
-		/* Ignore overrun when ignorning parity */
-		/* *** FIXME: is this in the right place? */
-		if (termios->c_iflag & IGNPAR)
-			port->ignore_status_mask |= RxOverrunError;
-	}
-
-		/* Ignore all receive errors when receive disabled */
-	if ((termios->c_cflag & CREAD) == 0)
-		port->ignore_status_mask |= RxError;
-
-	con   = UR (port, UART_R_CON);
-	inten = (UR (port, UART_R_INTEN) & ~ModemInt);
-
-	if (UART_ENABLE_MS (port, termios->c_cflag))
-		inten |= ModemInt;
-
-	BIT_CLR (port, UART_R_CON, UARTEN);	/* Disable UART */
-	UR (port, UART_R_INTEN) = 0;		/* Disable interrupts */
-	UR (port, UART_R_BRCON) = quot - 1;	/* Set baud rate divisor */
-	UR (port, UART_R_FCON)  = fcon;		/* Set FIFO and frame ctrl */
-	UR (port, UART_R_INTEN) = inten;	/* Enable interrupts */
-	UR (port, UART_R_CON)   = con;		/* Restore UART mode */
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char* lh7a40xuart_type (struct uart_port* port)
-{
-	return port->type == PORT_LH7A40X ? "LH7A40X" : NULL;
-}
-
-static void lh7a40xuart_release_port (struct uart_port* port)
-{
-	release_mem_region (port->mapbase, UART_REG_SIZE);
-}
-
-static int lh7a40xuart_request_port (struct uart_port* port)
-{
-	return request_mem_region (port->mapbase, UART_REG_SIZE,
-				   "serial_lh7a40x") != NULL
-		? 0 : -EBUSY;
-}
-
-static void lh7a40xuart_config_port (struct uart_port* port, int flags)
-{
-	if (flags & UART_CONFIG_TYPE) {
-		port->type = PORT_LH7A40X;
-		lh7a40xuart_request_port (port);
-	}
-}
-
-static int lh7a40xuart_verify_port (struct uart_port* port,
-				    struct serial_struct* ser)
-{
-	int ret = 0;
-
-	if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X)
-		ret = -EINVAL;
-	if (ser->irq < 0 || ser->irq >= nr_irqs)
-		ret = -EINVAL;
-	if (ser->baud_base < 9600) /* *** FIXME: is this true? */
-		ret = -EINVAL;
-	return ret;
-}
-
-static struct uart_ops lh7a40x_uart_ops = {
-	.tx_empty	= lh7a40xuart_tx_empty,
-	.set_mctrl	= lh7a40xuart_set_mctrl,
-	.get_mctrl	= lh7a40xuart_get_mctrl,
-	.stop_tx	= lh7a40xuart_stop_tx,
-	.start_tx	= lh7a40xuart_start_tx,
-	.stop_rx	= lh7a40xuart_stop_rx,
-	.enable_ms	= lh7a40xuart_enable_ms,
-	.break_ctl	= lh7a40xuart_break_ctl,
-	.startup	= lh7a40xuart_startup,
-	.shutdown	= lh7a40xuart_shutdown,
-	.set_termios	= lh7a40xuart_set_termios,
-	.type		= lh7a40xuart_type,
-	.release_port	= lh7a40xuart_release_port,
-	.request_port	= lh7a40xuart_request_port,
-	.config_port	= lh7a40xuart_config_port,
-	.verify_port	= lh7a40xuart_verify_port,
-};
-
-static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
-	{
-		.port = {
-			.membase	= (void*) io_p2v (UART1_PHYS),
-			.mapbase	= UART1_PHYS,
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_UART1INTR,
-			.uartclk	= 14745600/2,
-			.fifosize	= 16,
-			.ops		= &lh7a40x_uart_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 0,
-		},
-	},
-	{
-		.port = {
-			.membase	= (void*) io_p2v (UART2_PHYS),
-			.mapbase	= UART2_PHYS,
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_UART2INTR,
-			.uartclk	= 14745600/2,
-			.fifosize	= 16,
-			.ops		= &lh7a40x_uart_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 1,
-		},
-	},
-	{
-		.port = {
-			.membase	= (void*) io_p2v (UART3_PHYS),
-			.mapbase	= UART3_PHYS,
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_UART3INTR,
-			.uartclk	= 14745600/2,
-			.fifosize	= 16,
-			.ops		= &lh7a40x_uart_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 2,
-		},
-	},
-};
-
-#ifndef CONFIG_SERIAL_LH7A40X_CONSOLE
-# define LH7A40X_CONSOLE NULL
-#else
-# define LH7A40X_CONSOLE &lh7a40x_console
-
-static void lh7a40xuart_console_putchar(struct uart_port *port, int ch)
-{
-	while (UR(port, UART_R_STATUS) & nTxRdy)
-		;
-	UR(port, UART_R_DATA) = ch;
-}
-
-static void lh7a40xuart_console_write (struct console* co,
-				       const char* s,
-				       unsigned int count)
-{
-	struct uart_port* port = &lh7a40x_ports[co->index].port;
-	unsigned int con = UR (port, UART_R_CON);
-	unsigned int inten = UR (port, UART_R_INTEN);
-
-
-	UR (port, UART_R_INTEN) = 0;		/* Disable all interrupts */
-	BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */
-
-	uart_console_write(port, s, count, lh7a40xuart_console_putchar);
-
-				/* Wait until all characters are sent */
-	while (UR (port, UART_R_STATUS) & TxBusy)
-		;
-
-				/* Restore control and interrupt mask */
-	UR (port, UART_R_CON) = con;
-	UR (port, UART_R_INTEN) = inten;
-}
-
-static void __init lh7a40xuart_console_get_options (struct uart_port* port,
-						    int* baud,
-						    int* parity,
-						    int* bits)
-{
-	if (UR (port, UART_R_CON) & UARTEN) {
-		unsigned int fcon = UR (port, UART_R_FCON);
-		unsigned int quot = UR (port, UART_R_BRCON) + 1;
-
-		switch (fcon & (PEN | EPS)) {
-		default:        *parity = 'n'; break;
-		case PEN:       *parity = 'o'; break;
-		case PEN | EPS: *parity = 'e'; break;
-		}
-
-		switch (fcon & WLEN) {
-		default:
-		case WLEN_8: *bits = 8; break;
-		case WLEN_7: *bits = 7; break;
-		case WLEN_6: *bits = 6; break;
-		case WLEN_5: *bits = 5; break;
-		}
-
-		*baud = port->uartclk/(16*quot);
-	}
-}
-
-static int __init lh7a40xuart_console_setup (struct console* co, char* options)
-{
-	struct uart_port* port;
-	int baud = 38400;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	if (co->index >= DEV_NR) /* Bounds check on device number */
-		co->index = 0;
-	port = &lh7a40x_ports[co->index].port;
-
-	if (options)
-		uart_parse_options (options, &baud, &parity, &bits, &flow);
-	else
-		lh7a40xuart_console_get_options (port, &baud, &parity, &bits);
-
-	return uart_set_options (port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver lh7a40x_reg;
-static struct console lh7a40x_console = {
-	.name		= "ttyAM",
-	.write		= lh7a40xuart_console_write,
-	.device		= uart_console_device,
-	.setup		= lh7a40xuart_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &lh7a40x_reg,
-};
-
-static int __init lh7a40xuart_console_init(void)
-{
-	register_console (&lh7a40x_console);
-	return 0;
-}
-
-console_initcall (lh7a40xuart_console_init);
-
-#endif
-
-static struct uart_driver lh7a40x_reg = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "ttyAM",
-	.dev_name		= "ttyAM",
-	.major			= DEV_MAJOR,
-	.minor			= DEV_MINOR,
-	.nr			= DEV_NR,
-	.cons			= LH7A40X_CONSOLE,
-};
-
-static int __init lh7a40xuart_init(void)
-{
-	int ret;
-
-	printk (KERN_INFO "serial: LH7A40X serial driver\n");
-
-	ret = uart_register_driver (&lh7a40x_reg);
-
-	if (ret == 0) {
-		int i;
-
-		for (i = 0; i < DEV_NR; i++) {
-			/* UART3, when used, requires GPIO pin reallocation */
-			if (lh7a40x_ports[i].port.mapbase == UART3_PHYS)
-				GPIO_PINMUX |= 1<<3;
-			uart_add_one_port (&lh7a40x_reg,
-					   &lh7a40x_ports[i].port);
-		}
-	}
-	return ret;
-}
-
-static void __exit lh7a40xuart_exit(void)
-{
-	int i;
-
-	for (i = 0; i < DEV_NR; i++)
-		uart_remove_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port);
-
-	uart_unregister_driver (&lh7a40x_reg);
-}
-
-module_init (lh7a40xuart_init);
-module_exit (lh7a40xuart_exit);
-
-MODULE_AUTHOR ("Marc Singer");
-MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver");
-MODULE_LICENSE ("GPL");
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index c9014868297d..c0b7246d7339 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -519,7 +519,7 @@ static struct console sunhv_console = {
 	.data	=	&sunhv_reg,
 };
 
-static int __devinit hv_probe(struct platform_device *op, const struct of_device_id *match)
+static int __devinit hv_probe(struct platform_device *op)
 {
 	struct uart_port *port;
 	unsigned long minor;
@@ -629,7 +629,7 @@ static const struct of_device_id hv_match[] = {
 };
 MODULE_DEVICE_TABLE(of, hv_match);
 
-static struct of_platform_driver hv_driver = {
+static struct platform_driver hv_driver = {
 	.driver = {
 		.name = "hv",
 		.owner = THIS_MODULE,
@@ -644,12 +644,12 @@ static int __init sunhv_init(void)
 	if (tlb_type != hypervisor)
 		return -ENODEV;
 
-	return of_register_platform_driver(&hv_driver);
+	return platform_driver_register(&hv_driver);
 }
 
 static void __exit sunhv_exit(void)
 {
-	of_unregister_platform_driver(&hv_driver);
+	platform_driver_unregister(&hv_driver);
 }
 
 module_init(sunhv_init);
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 5b246b18f42f..b5fa2a57b9da 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -1006,7 +1006,7 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
 	return 0;
 }
 
-static int __devinit sab_probe(struct platform_device *op, const struct of_device_id *match)
+static int __devinit sab_probe(struct platform_device *op)
 {
 	static int inst;
 	struct uart_sunsab_port *up;
@@ -1092,7 +1092,7 @@ static const struct of_device_id sab_match[] = {
 };
 MODULE_DEVICE_TABLE(of, sab_match);
 
-static struct of_platform_driver sab_driver = {
+static struct platform_driver sab_driver = {
 	.driver = {
 		.name = "sab",
 		.owner = THIS_MODULE,
@@ -1130,12 +1130,12 @@ static int __init sunsab_init(void)
 		}
 	}
 
-	return of_register_platform_driver(&sab_driver);
+	return platform_driver_register(&sab_driver);
 }
 
 static void __exit sunsab_exit(void)
 {
-	of_unregister_platform_driver(&sab_driver);
+	platform_driver_unregister(&sab_driver);
 	if (sunsab_reg.nr) {
 		sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
 	}
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 551ebfe3ccbb..92aa54550e84 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1406,7 +1406,7 @@ static enum su_type __devinit su_get_type(struct device_node *dp)
 	return SU_PORT_PORT;
 }
 
-static int __devinit su_probe(struct platform_device *op, const struct of_device_id *match)
+static int __devinit su_probe(struct platform_device *op)
 {
 	static int inst;
 	struct device_node *dp = op->dev.of_node;
@@ -1543,7 +1543,7 @@ static const struct of_device_id su_match[] = {
 };
 MODULE_DEVICE_TABLE(of, su_match);
 
-static struct of_platform_driver su_driver = {
+static struct platform_driver su_driver = {
 	.driver = {
 		.name = "su",
 		.owner = THIS_MODULE,
@@ -1586,7 +1586,7 @@ static int __init sunsu_init(void)
 			return err;
 	}
 
-	err = of_register_platform_driver(&su_driver);
+	err = platform_driver_register(&su_driver);
 	if (err && num_uart)
 		sunserial_unregister_minors(&sunsu_reg, num_uart);
 
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index c1967ac1c07f..99ff9abf57ce 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -1399,7 +1399,7 @@ static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up)
 
 static int zilog_irq = -1;
 
-static int __devinit zs_probe(struct platform_device *op, const struct of_device_id *match)
+static int __devinit zs_probe(struct platform_device *op)
 {
 	static int kbm_inst, uart_inst;
 	int inst;
@@ -1540,7 +1540,7 @@ static const struct of_device_id zs_match[] = {
 };
 MODULE_DEVICE_TABLE(of, zs_match);
 
-static struct of_platform_driver zs_driver = {
+static struct platform_driver zs_driver = {
 	.driver = {
 		.name = "zs",
 		.owner = THIS_MODULE,
@@ -1576,7 +1576,7 @@ static int __init sunzilog_init(void)
 			goto out_free_tables;
 	}
 
-	err = of_register_platform_driver(&zs_driver);
+	err = platform_driver_register(&zs_driver);
 	if (err)
 		goto out_unregister_uart;
 
@@ -1604,7 +1604,7 @@ out:
 	return err;
 
 out_unregister_driver:
-	of_unregister_platform_driver(&zs_driver);
+	platform_driver_unregister(&zs_driver);
 
 out_unregister_uart:
 	if (num_sunzilog) {
@@ -1619,7 +1619,7 @@ out_free_tables:
 
 static void __exit sunzilog_exit(void)
 {
-	of_unregister_platform_driver(&zs_driver);
+	platform_driver_unregister(&zs_driver);
 
 	if (zilog_irq != -1) {
 		struct uart_sunzilog_port *up = sunzilog_irq_chain;
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index d2fce865b731..8af1ed83a4c0 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -19,22 +19,11 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <asm/io.h>
-#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 
-/* Match table for of_platform binding */
-static struct of_device_id ulite_of_match[] __devinitdata = {
-	{ .compatible = "xlnx,opb-uartlite-1.00.b", },
-	{ .compatible = "xlnx,xps-uartlite-1.00.a", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, ulite_of_match);
-
-#endif
-
 #define ULITE_NAME		"ttyUL"
 #define ULITE_MAJOR		204
 #define ULITE_MINOR		187
@@ -571,9 +560,29 @@ static int __devexit ulite_release(struct device *dev)
  * Platform bus binding
  */
 
+#if defined(CONFIG_OF)
+/* Match table for of_platform binding */
+static struct of_device_id ulite_of_match[] __devinitdata = {
+	{ .compatible = "xlnx,opb-uartlite-1.00.b", },
+	{ .compatible = "xlnx,xps-uartlite-1.00.a", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ulite_of_match);
+#else /* CONFIG_OF */
+#define ulite_of_match NULL
+#endif /* CONFIG_OF */
+
 static int __devinit ulite_probe(struct platform_device *pdev)
 {
 	struct resource *res, *res2;
+	int id = pdev->id;
+#ifdef CONFIG_OF
+	const __be32 *prop;
+
+	prop = of_get_property(pdev->dev.of_node, "port-number", NULL);
+	if (prop)
+		id = be32_to_cpup(prop);
+#endif
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
@@ -583,7 +592,7 @@ static int __devinit ulite_probe(struct platform_device *pdev)
 	if (!res2)
 		return -ENODEV;
 
-	return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start);
+	return ulite_assign(&pdev->dev, id, res->start, res2->start);
 }
 
 static int __devexit ulite_remove(struct platform_device *pdev)
@@ -595,72 +604,15 @@ static int __devexit ulite_remove(struct platform_device *pdev)
 MODULE_ALIAS("platform:uartlite");
 
 static struct platform_driver ulite_platform_driver = {
-	.probe	= ulite_probe,
-	.remove	= __devexit_p(ulite_remove),
-	.driver	= {
-		   .owner = THIS_MODULE,
-		   .name  = "uartlite",
-		   },
-};
-
-/* ---------------------------------------------------------------------
- * OF bus bindings
- */
-#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
-static int __devinit
-ulite_of_probe(struct platform_device *op, const struct of_device_id *match)
-{
-	struct resource res;
-	const unsigned int *id;
-	int irq, rc;
-
-	dev_dbg(&op->dev, "%s(%p, %p)\n", __func__, op, match);
-
-	rc = of_address_to_resource(op->dev.of_node, 0, &res);
-	if (rc) {
-		dev_err(&op->dev, "invalid address\n");
-		return rc;
-	}
-
-	irq = irq_of_parse_and_map(op->dev.of_node, 0);
-
-	id = of_get_property(op->dev.of_node, "port-number", NULL);
-
-	return ulite_assign(&op->dev, id ? *id : -1, res.start, irq);
-}
-
-static int __devexit ulite_of_remove(struct platform_device *op)
-{
-	return ulite_release(&op->dev);
-}
-
-static struct of_platform_driver ulite_of_driver = {
-	.probe = ulite_of_probe,
-	.remove = __devexit_p(ulite_of_remove),
+	.probe = ulite_probe,
+	.remove = __devexit_p(ulite_remove),
 	.driver = {
-		.name = "uartlite",
 		.owner = THIS_MODULE,
+		.name  = "uartlite",
 		.of_match_table = ulite_of_match,
 	},
 };
 
-/* Registration helpers to keep the number of #ifdefs to a minimum */
-static inline int __init ulite_of_register(void)
-{
-	pr_debug("uartlite: calling of_register_platform_driver()\n");
-	return of_register_platform_driver(&ulite_of_driver);
-}
-
-static inline void __exit ulite_of_unregister(void)
-{
-	of_unregister_platform_driver(&ulite_of_driver);
-}
-#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
-/* Appropriate config not enabled; do nothing helpers */
-static inline int __init ulite_of_register(void) { return 0; }
-static inline void __exit ulite_of_unregister(void) { }
-#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
-
 /* ---------------------------------------------------------------------
  * Module setup/teardown
  */
@@ -674,10 +626,6 @@ int __init ulite_init(void)
 	if (ret)
 		goto err_uart;
 
-	ret = ulite_of_register();
-	if (ret)
-		goto err_of;
-
 	pr_debug("uartlite: calling platform_driver_register()\n");
 	ret = platform_driver_register(&ulite_platform_driver);
 	if (ret)
@@ -686,8 +634,6 @@ int __init ulite_init(void)
 	return 0;
 
 err_plat:
-	ulite_of_unregister();
-err_of:
 	uart_unregister_driver(&ulite_uart_driver);
 err_uart:
 	printk(KERN_ERR "registering uartlite driver failed: err=%i", ret);
@@ -697,7 +643,6 @@ err_uart:
 void __exit ulite_exit(void)
 {
 	platform_driver_unregister(&ulite_platform_driver);
-	ulite_of_unregister();
 	uart_unregister_driver(&ulite_uart_driver);
 }
 
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 3f4848e2174a..ff51dae1df0c 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1194,8 +1194,7 @@ static void uart_firmware_cont(const struct firmware *fw, void *context)
 	release_firmware(fw);
 }
 
-static int ucc_uart_probe(struct platform_device *ofdev,
-	const struct of_device_id *match)
+static int ucc_uart_probe(struct platform_device *ofdev)
 {
 	struct device_node *np = ofdev->dev.of_node;
 	const unsigned int *iprop;      /* Integer OF properties */
@@ -1485,7 +1484,7 @@ static struct of_device_id ucc_uart_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ucc_uart_match);
 
-static struct of_platform_driver ucc_uart_of_driver = {
+static struct platform_driver ucc_uart_of_driver = {
 	.driver = {
 		.name = "ucc_uart",
 		.owner = THIS_MODULE,
@@ -1510,7 +1509,7 @@ static int __init ucc_uart_init(void)
 		return ret;
 	}
 
-	ret = of_register_platform_driver(&ucc_uart_of_driver);
+	ret = platform_driver_register(&ucc_uart_of_driver);
 	if (ret)
 		printk(KERN_ERR
 		       "ucc-uart: could not register platform driver\n");
@@ -1523,7 +1522,7 @@ static void __exit ucc_uart_exit(void)
 	printk(KERN_INFO
 	       "Freescale QUICC Engine UART device driver unloading\n");
 
-	of_unregister_platform_driver(&ucc_uart_of_driver);
+	platform_driver_unregister(&ucc_uart_of_driver);
 	uart_unregister_driver(&ucc_uart_driver);
 }
 
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
new file mode 100644
index 000000000000..18888d005a0a
--- /dev/null
+++ b/drivers/tty/synclink.c
@@ -0,0 +1,8119 @@
+/*
+ * linux/drivers/char/synclink.c
+ *
+ * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $
+ *
+ * Device driver for Microgate SyncLink ISA and PCI
+ * high speed multiprotocol serial adapters.
+ *
+ * written by Paul Fulghum for Microgate Corporation
+ * paulkf@microgate.com
+ *
+ * Microgate and SyncLink are trademarks of Microgate Corporation
+ *
+ * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
+ *
+ * Original release 01/11/99
+ *
+ * This code is released under the GNU General Public License (GPL)
+ *
+ * This driver is primarily intended for use in synchronous
+ * HDLC mode. Asynchronous mode is also provided.
+ *
+ * When operating in synchronous mode, each call to mgsl_write()
+ * contains exactly one complete HDLC frame. Calling mgsl_put_char
+ * will start assembling an HDLC frame that will not be sent until
+ * mgsl_flush_chars or mgsl_write is called.
+ * 
+ * Synchronous receive data is reported as complete frames. To accomplish
+ * this, the TTY flip buffer is bypassed (too small to hold largest
+ * frame and may fragment frames) and the line discipline
+ * receive entry point is called directly.
+ *
+ * This driver has been tested with a slightly modified ppp.c driver
+ * for synchronous PPP.
+ *
+ * 2000/02/16
+ * Added interface for syncppp.c driver (an alternate synchronous PPP
+ * implementation that also supports Cisco HDLC). Each device instance
+ * registers as a tty device AND a network device (if dosyncppp option
+ * is set for the device). The functionality is determined by which
+ * device interface is opened.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#if defined(__i386__)
+#  define BREAKPOINT() asm("   int $3");
+#else
+#  define BREAKPOINT() { }
+#endif
+
+#define MAX_ISA_DEVICES 10
+#define MAX_PCI_DEVICES 10
+#define MAX_TOTAL_DEVICES 20
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/ioctl.h>
+#include <linux/synclink.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <linux/bitops.h>
+#include <asm/types.h>
+#include <linux/termios.h>
+#include <linux/workqueue.h>
+#include <linux/hdlc.h>
+#include <linux/dma-mapping.h>
+
+#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE))
+#define SYNCLINK_GENERIC_HDLC 1
+#else
+#define SYNCLINK_GENERIC_HDLC 0
+#endif
+
+#define GET_USER(error,value,addr) error = get_user(value,addr)
+#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
+#define PUT_USER(error,value,addr) error = put_user(value,addr)
+#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
+
+#include <asm/uaccess.h>
+
+#define RCLRVALUE 0xffff
+
+static MGSL_PARAMS default_params = {
+	MGSL_MODE_HDLC,			/* unsigned long mode */
+	0,				/* unsigned char loopback; */
+	HDLC_FLAG_UNDERRUN_ABORT15,	/* unsigned short flags; */
+	HDLC_ENCODING_NRZI_SPACE,	/* unsigned char encoding; */
+	0,				/* unsigned long clock_speed; */
+	0xff,				/* unsigned char addr_filter; */
+	HDLC_CRC_16_CCITT,		/* unsigned short crc_type; */
+	HDLC_PREAMBLE_LENGTH_8BITS,	/* unsigned char preamble_length; */
+	HDLC_PREAMBLE_PATTERN_NONE,	/* unsigned char preamble; */
+	9600,				/* unsigned long data_rate; */
+	8,				/* unsigned char data_bits; */
+	1,				/* unsigned char stop_bits; */
+	ASYNC_PARITY_NONE		/* unsigned char parity; */
+};
+
+#define SHARED_MEM_ADDRESS_SIZE 0x40000
+#define BUFFERLISTSIZE 4096
+#define DMABUFFERSIZE 4096
+#define MAXRXFRAMES 7
+
+typedef struct _DMABUFFERENTRY
+{
+	u32 phys_addr;	/* 32-bit flat physical address of data buffer */
+	volatile u16 count;	/* buffer size/data count */
+	volatile u16 status;	/* Control/status field */
+	volatile u16 rcc;	/* character count field */
+	u16 reserved;	/* padding required by 16C32 */
+	u32 link;	/* 32-bit flat link to next buffer entry */
+	char *virt_addr;	/* virtual address of data buffer */
+	u32 phys_entry;	/* physical address of this buffer entry */
+	dma_addr_t dma_addr;
+} DMABUFFERENTRY, *DMAPBUFFERENTRY;
+
+/* The queue of BH actions to be performed */
+
+#define BH_RECEIVE  1
+#define BH_TRANSMIT 2
+#define BH_STATUS   4
+
+#define IO_PIN_SHUTDOWN_LIMIT 100
+
+struct	_input_signal_events {
+	int	ri_up;	
+	int	ri_down;
+	int	dsr_up;
+	int	dsr_down;
+	int	dcd_up;
+	int	dcd_down;
+	int	cts_up;
+	int	cts_down;
+};
+
+/* transmit holding buffer definitions*/
+#define MAX_TX_HOLDING_BUFFERS 5
+struct tx_holding_buffer {
+	int	buffer_size;
+	unsigned char *	buffer;
+};
+
+
+/*
+ * Device instance data structure
+ */
+ 
+struct mgsl_struct {
+	int			magic;
+	struct tty_port		port;
+	int			line;
+	int                     hw_version;
+	
+	struct mgsl_icount	icount;
+	
+	int			timeout;
+	int			x_char;		/* xon/xoff character */
+	u16			read_status_mask;
+	u16			ignore_status_mask;	
+	unsigned char 		*xmit_buf;
+	int			xmit_head;
+	int			xmit_tail;
+	int			xmit_cnt;
+	
+	wait_queue_head_t	status_event_wait_q;
+	wait_queue_head_t	event_wait_q;
+	struct timer_list	tx_timer;	/* HDLC transmit timeout timer */
+	struct mgsl_struct	*next_device;	/* device list link */
+	
+	spinlock_t irq_spinlock;		/* spinlock for synchronizing with ISR */
+	struct work_struct task;		/* task structure for scheduling bh */
+
+	u32 EventMask;			/* event trigger mask */
+	u32 RecordedEvents;		/* pending events */
+
+	u32 max_frame_size;		/* as set by device config */
+
+	u32 pending_bh;
+
+	bool bh_running;		/* Protection from multiple */
+	int isr_overflow;
+	bool bh_requested;
+	
+	int dcd_chkcount;		/* check counts to prevent */
+	int cts_chkcount;		/* too many IRQs if a signal */
+	int dsr_chkcount;		/* is floating */
+	int ri_chkcount;
+
+	char *buffer_list;		/* virtual address of Rx & Tx buffer lists */
+	u32 buffer_list_phys;
+	dma_addr_t buffer_list_dma_addr;
+
+	unsigned int rx_buffer_count;	/* count of total allocated Rx buffers */
+	DMABUFFERENTRY *rx_buffer_list;	/* list of receive buffer entries */
+	unsigned int current_rx_buffer;
+
+	int num_tx_dma_buffers;		/* number of tx dma frames required */
+ 	int tx_dma_buffers_used;
+	unsigned int tx_buffer_count;	/* count of total allocated Tx buffers */
+	DMABUFFERENTRY *tx_buffer_list;	/* list of transmit buffer entries */
+	int start_tx_dma_buffer;	/* tx dma buffer to start tx dma operation */
+	int current_tx_buffer;          /* next tx dma buffer to be loaded */
+	
+	unsigned char *intermediate_rxbuffer;
+
+	int num_tx_holding_buffers;	/* number of tx holding buffer allocated */
+	int get_tx_holding_index;  	/* next tx holding buffer for adapter to load */
+	int put_tx_holding_index;  	/* next tx holding buffer to store user request */
+	int tx_holding_count;		/* number of tx holding buffers waiting */
+	struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS];
+
+	bool rx_enabled;
+	bool rx_overflow;
+	bool rx_rcc_underrun;
+
+	bool tx_enabled;
+	bool tx_active;
+	u32 idle_mode;
+
+	u16 cmr_value;
+	u16 tcsr_value;
+
+	char device_name[25];		/* device instance name */
+
+	unsigned int bus_type;	/* expansion bus type (ISA,EISA,PCI) */
+	unsigned char bus;		/* expansion bus number (zero based) */
+	unsigned char function;		/* PCI device number */
+
+	unsigned int io_base;		/* base I/O address of adapter */
+	unsigned int io_addr_size;	/* size of the I/O address range */
+	bool io_addr_requested;		/* true if I/O address requested */
+	
+	unsigned int irq_level;		/* interrupt level */
+	unsigned long irq_flags;
+	bool irq_requested;		/* true if IRQ requested */
+	
+	unsigned int dma_level;		/* DMA channel */
+	bool dma_requested;		/* true if dma channel requested */
+
+	u16 mbre_bit;
+	u16 loopback_bits;
+	u16 usc_idle_mode;
+
+	MGSL_PARAMS params;		/* communications parameters */
+
+	unsigned char serial_signals;	/* current serial signal states */
+
+	bool irq_occurred;		/* for diagnostics use */
+	unsigned int init_error;	/* Initialization startup error 		(DIAGS)	*/
+	int	fDiagnosticsmode;	/* Driver in Diagnostic mode?			(DIAGS)	*/
+
+	u32 last_mem_alloc;
+	unsigned char* memory_base;	/* shared memory address (PCI only) */
+	u32 phys_memory_base;
+	bool shared_mem_requested;
+
+	unsigned char* lcr_base;	/* local config registers (PCI only) */
+	u32 phys_lcr_base;
+	u32 lcr_offset;
+	bool lcr_mem_requested;
+
+	u32 misc_ctrl_value;
+	char flag_buf[MAX_ASYNC_BUFFER_SIZE];
+	char char_buf[MAX_ASYNC_BUFFER_SIZE];	
+	bool drop_rts_on_tx_done;
+
+	bool loopmode_insert_requested;
+	bool loopmode_send_done_requested;
+	
+	struct	_input_signal_events	input_signal_events;
+
+	/* generic HDLC device parts */
+	int netcount;
+	spinlock_t netlock;
+
+#if SYNCLINK_GENERIC_HDLC
+	struct net_device *netdev;
+#endif
+};
+
+#define MGSL_MAGIC 0x5401
+
+/*
+ * The size of the serial xmit buffer is 1 page, or 4096 bytes
+ */
+#ifndef SERIAL_XMIT_SIZE
+#define SERIAL_XMIT_SIZE 4096
+#endif
+
+/*
+ * These macros define the offsets used in calculating the
+ * I/O address of the specified USC registers.
+ */
+
+
+#define DCPIN 2		/* Bit 1 of I/O address */
+#define SDPIN 4		/* Bit 2 of I/O address */
+
+#define DCAR 0		/* DMA command/address register */
+#define CCAR SDPIN		/* channel command/address register */
+#define DATAREG DCPIN + SDPIN	/* serial data register */
+#define MSBONLY 0x41
+#define LSBONLY 0x40
+
+/*
+ * These macros define the register address (ordinal number)
+ * used for writing address/value pairs to the USC.
+ */
+
+#define CMR	0x02	/* Channel mode Register */
+#define CCSR	0x04	/* Channel Command/status Register */
+#define CCR	0x06	/* Channel Control Register */
+#define PSR	0x08	/* Port status Register */
+#define PCR	0x0a	/* Port Control Register */
+#define TMDR	0x0c	/* Test mode Data Register */
+#define TMCR	0x0e	/* Test mode Control Register */
+#define CMCR	0x10	/* Clock mode Control Register */
+#define HCR	0x12	/* Hardware Configuration Register */
+#define IVR	0x14	/* Interrupt Vector Register */
+#define IOCR	0x16	/* Input/Output Control Register */
+#define ICR	0x18	/* Interrupt Control Register */
+#define DCCR	0x1a	/* Daisy Chain Control Register */
+#define MISR	0x1c	/* Misc Interrupt status Register */
+#define SICR	0x1e	/* status Interrupt Control Register */
+#define RDR	0x20	/* Receive Data Register */
+#define RMR	0x22	/* Receive mode Register */
+#define RCSR	0x24	/* Receive Command/status Register */
+#define RICR	0x26	/* Receive Interrupt Control Register */
+#define RSR	0x28	/* Receive Sync Register */
+#define RCLR	0x2a	/* Receive count Limit Register */
+#define RCCR	0x2c	/* Receive Character count Register */
+#define TC0R	0x2e	/* Time Constant 0 Register */
+#define TDR	0x30	/* Transmit Data Register */
+#define TMR	0x32	/* Transmit mode Register */
+#define TCSR	0x34	/* Transmit Command/status Register */
+#define TICR	0x36	/* Transmit Interrupt Control Register */
+#define TSR	0x38	/* Transmit Sync Register */
+#define TCLR	0x3a	/* Transmit count Limit Register */
+#define TCCR	0x3c	/* Transmit Character count Register */
+#define TC1R	0x3e	/* Time Constant 1 Register */
+
+
+/*
+ * MACRO DEFINITIONS FOR DMA REGISTERS
+ */
+
+#define DCR	0x06	/* DMA Control Register (shared) */
+#define DACR	0x08	/* DMA Array count Register (shared) */
+#define BDCR	0x12	/* Burst/Dwell Control Register (shared) */
+#define DIVR	0x14	/* DMA Interrupt Vector Register (shared) */	
+#define DICR	0x18	/* DMA Interrupt Control Register (shared) */
+#define CDIR	0x1a	/* Clear DMA Interrupt Register (shared) */
+#define SDIR	0x1c	/* Set DMA Interrupt Register (shared) */
+
+#define TDMR	0x02	/* Transmit DMA mode Register */
+#define TDIAR	0x1e	/* Transmit DMA Interrupt Arm Register */
+#define TBCR	0x2a	/* Transmit Byte count Register */
+#define TARL	0x2c	/* Transmit Address Register (low) */
+#define TARU	0x2e	/* Transmit Address Register (high) */
+#define NTBCR	0x3a	/* Next Transmit Byte count Register */
+#define NTARL	0x3c	/* Next Transmit Address Register (low) */
+#define NTARU	0x3e	/* Next Transmit Address Register (high) */
+
+#define RDMR	0x82	/* Receive DMA mode Register (non-shared) */
+#define RDIAR	0x9e	/* Receive DMA Interrupt Arm Register */
+#define RBCR	0xaa	/* Receive Byte count Register */
+#define RARL	0xac	/* Receive Address Register (low) */
+#define RARU	0xae	/* Receive Address Register (high) */
+#define NRBCR	0xba	/* Next Receive Byte count Register */
+#define NRARL	0xbc	/* Next Receive Address Register (low) */
+#define NRARU	0xbe	/* Next Receive Address Register (high) */
+
+
+/*
+ * MACRO DEFINITIONS FOR MODEM STATUS BITS
+ */
+
+#define MODEMSTATUS_DTR 0x80
+#define MODEMSTATUS_DSR 0x40
+#define MODEMSTATUS_RTS 0x20
+#define MODEMSTATUS_CTS 0x10
+#define MODEMSTATUS_RI  0x04
+#define MODEMSTATUS_DCD 0x01
+
+
+/*
+ * Channel Command/Address Register (CCAR) Command Codes
+ */
+
+#define RTCmd_Null			0x0000
+#define RTCmd_ResetHighestIus		0x1000
+#define RTCmd_TriggerChannelLoadDma	0x2000
+#define RTCmd_TriggerRxDma		0x2800
+#define RTCmd_TriggerTxDma		0x3000
+#define RTCmd_TriggerRxAndTxDma		0x3800
+#define RTCmd_PurgeRxFifo		0x4800
+#define RTCmd_PurgeTxFifo		0x5000
+#define RTCmd_PurgeRxAndTxFifo		0x5800
+#define RTCmd_LoadRcc			0x6800
+#define RTCmd_LoadTcc			0x7000
+#define RTCmd_LoadRccAndTcc		0x7800
+#define RTCmd_LoadTC0			0x8800
+#define RTCmd_LoadTC1			0x9000
+#define RTCmd_LoadTC0AndTC1		0x9800
+#define RTCmd_SerialDataLSBFirst	0xa000
+#define RTCmd_SerialDataMSBFirst	0xa800
+#define RTCmd_SelectBigEndian		0xb000
+#define RTCmd_SelectLittleEndian	0xb800
+
+
+/*
+ * DMA Command/Address Register (DCAR) Command Codes
+ */
+
+#define DmaCmd_Null			0x0000
+#define DmaCmd_ResetTxChannel		0x1000
+#define DmaCmd_ResetRxChannel		0x1200
+#define DmaCmd_StartTxChannel		0x2000
+#define DmaCmd_StartRxChannel		0x2200
+#define DmaCmd_ContinueTxChannel	0x3000
+#define DmaCmd_ContinueRxChannel	0x3200
+#define DmaCmd_PauseTxChannel		0x4000
+#define DmaCmd_PauseRxChannel		0x4200
+#define DmaCmd_AbortTxChannel		0x5000
+#define DmaCmd_AbortRxChannel		0x5200
+#define DmaCmd_InitTxChannel		0x7000
+#define DmaCmd_InitRxChannel		0x7200
+#define DmaCmd_ResetHighestDmaIus	0x8000
+#define DmaCmd_ResetAllChannels		0x9000
+#define DmaCmd_StartAllChannels		0xa000
+#define DmaCmd_ContinueAllChannels	0xb000
+#define DmaCmd_PauseAllChannels		0xc000
+#define DmaCmd_AbortAllChannels		0xd000
+#define DmaCmd_InitAllChannels		0xf000
+
+#define TCmd_Null			0x0000
+#define TCmd_ClearTxCRC			0x2000
+#define TCmd_SelectTicrTtsaData		0x4000
+#define TCmd_SelectTicrTxFifostatus	0x5000
+#define TCmd_SelectTicrIntLevel		0x6000
+#define TCmd_SelectTicrdma_level		0x7000
+#define TCmd_SendFrame			0x8000
+#define TCmd_SendAbort			0x9000
+#define TCmd_EnableDleInsertion		0xc000
+#define TCmd_DisableDleInsertion	0xd000
+#define TCmd_ClearEofEom		0xe000
+#define TCmd_SetEofEom			0xf000
+
+#define RCmd_Null			0x0000
+#define RCmd_ClearRxCRC			0x2000
+#define RCmd_EnterHuntmode		0x3000
+#define RCmd_SelectRicrRtsaData		0x4000
+#define RCmd_SelectRicrRxFifostatus	0x5000
+#define RCmd_SelectRicrIntLevel		0x6000
+#define RCmd_SelectRicrdma_level		0x7000
+
+/*
+ * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR)
+ */
+ 
+#define RECEIVE_STATUS		BIT5
+#define RECEIVE_DATA		BIT4
+#define TRANSMIT_STATUS		BIT3
+#define TRANSMIT_DATA		BIT2
+#define IO_PIN			BIT1
+#define MISC			BIT0
+
+
+/*
+ * Receive status Bits in Receive Command/status Register RCSR
+ */
+
+#define RXSTATUS_SHORT_FRAME		BIT8
+#define RXSTATUS_CODE_VIOLATION		BIT8
+#define RXSTATUS_EXITED_HUNT		BIT7
+#define RXSTATUS_IDLE_RECEIVED		BIT6
+#define RXSTATUS_BREAK_RECEIVED		BIT5
+#define RXSTATUS_ABORT_RECEIVED		BIT5
+#define RXSTATUS_RXBOUND		BIT4
+#define RXSTATUS_CRC_ERROR		BIT3
+#define RXSTATUS_FRAMING_ERROR		BIT3
+#define RXSTATUS_ABORT			BIT2
+#define RXSTATUS_PARITY_ERROR		BIT2
+#define RXSTATUS_OVERRUN		BIT1
+#define RXSTATUS_DATA_AVAILABLE		BIT0
+#define RXSTATUS_ALL			0x01f6
+#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) )
+
+/*
+ * Values for setting transmit idle mode in 
+ * Transmit Control/status Register (TCSR)
+ */
+#define IDLEMODE_FLAGS			0x0000
+#define IDLEMODE_ALT_ONE_ZERO		0x0100
+#define IDLEMODE_ZERO			0x0200
+#define IDLEMODE_ONE			0x0300
+#define IDLEMODE_ALT_MARK_SPACE		0x0500
+#define IDLEMODE_SPACE			0x0600
+#define IDLEMODE_MARK			0x0700
+#define IDLEMODE_MASK			0x0700
+
+/*
+ * IUSC revision identifiers
+ */
+#define	IUSC_SL1660			0x4d44
+#define IUSC_PRE_SL1660			0x4553
+
+/*
+ * Transmit status Bits in Transmit Command/status Register (TCSR)
+ */
+
+#define TCSR_PRESERVE			0x0F00
+
+#define TCSR_UNDERWAIT			BIT11
+#define TXSTATUS_PREAMBLE_SENT		BIT7
+#define TXSTATUS_IDLE_SENT		BIT6
+#define TXSTATUS_ABORT_SENT		BIT5
+#define TXSTATUS_EOF_SENT		BIT4
+#define TXSTATUS_EOM_SENT		BIT4
+#define TXSTATUS_CRC_SENT		BIT3
+#define TXSTATUS_ALL_SENT		BIT2
+#define TXSTATUS_UNDERRUN		BIT1
+#define TXSTATUS_FIFO_EMPTY		BIT0
+#define TXSTATUS_ALL			0x00fa
+#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) )
+				
+
+#define MISCSTATUS_RXC_LATCHED		BIT15
+#define MISCSTATUS_RXC			BIT14
+#define MISCSTATUS_TXC_LATCHED		BIT13
+#define MISCSTATUS_TXC			BIT12
+#define MISCSTATUS_RI_LATCHED		BIT11
+#define MISCSTATUS_RI			BIT10
+#define MISCSTATUS_DSR_LATCHED		BIT9
+#define MISCSTATUS_DSR			BIT8
+#define MISCSTATUS_DCD_LATCHED		BIT7
+#define MISCSTATUS_DCD			BIT6
+#define MISCSTATUS_CTS_LATCHED		BIT5
+#define MISCSTATUS_CTS			BIT4
+#define MISCSTATUS_RCC_UNDERRUN		BIT3
+#define MISCSTATUS_DPLL_NO_SYNC		BIT2
+#define MISCSTATUS_BRG1_ZERO		BIT1
+#define MISCSTATUS_BRG0_ZERO		BIT0
+
+#define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0))
+#define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f))
+
+#define SICR_RXC_ACTIVE			BIT15
+#define SICR_RXC_INACTIVE		BIT14
+#define SICR_RXC			(BIT15+BIT14)
+#define SICR_TXC_ACTIVE			BIT13
+#define SICR_TXC_INACTIVE		BIT12
+#define SICR_TXC			(BIT13+BIT12)
+#define SICR_RI_ACTIVE			BIT11
+#define SICR_RI_INACTIVE		BIT10
+#define SICR_RI				(BIT11+BIT10)
+#define SICR_DSR_ACTIVE			BIT9
+#define SICR_DSR_INACTIVE		BIT8
+#define SICR_DSR			(BIT9+BIT8)
+#define SICR_DCD_ACTIVE			BIT7
+#define SICR_DCD_INACTIVE		BIT6
+#define SICR_DCD			(BIT7+BIT6)
+#define SICR_CTS_ACTIVE			BIT5
+#define SICR_CTS_INACTIVE		BIT4
+#define SICR_CTS			(BIT5+BIT4)
+#define SICR_RCC_UNDERFLOW		BIT3
+#define SICR_DPLL_NO_SYNC		BIT2
+#define SICR_BRG1_ZERO			BIT1
+#define SICR_BRG0_ZERO			BIT0
+
+void usc_DisableMasterIrqBit( struct mgsl_struct *info );
+void usc_EnableMasterIrqBit( struct mgsl_struct *info );
+void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask );
+void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask );
+void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask );
+
+#define usc_EnableInterrupts( a, b ) \
+	usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) )
+
+#define usc_DisableInterrupts( a, b ) \
+	usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) )
+
+#define usc_EnableMasterIrqBit(a) \
+	usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) )
+
+#define usc_DisableMasterIrqBit(a) \
+	usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) )
+
+#define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) )
+
+/*
+ * Transmit status Bits in Transmit Control status Register (TCSR)
+ * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0)
+ */
+
+#define TXSTATUS_PREAMBLE_SENT	BIT7
+#define TXSTATUS_IDLE_SENT	BIT6
+#define TXSTATUS_ABORT_SENT	BIT5
+#define TXSTATUS_EOF		BIT4
+#define TXSTATUS_CRC_SENT	BIT3
+#define TXSTATUS_ALL_SENT	BIT2
+#define TXSTATUS_UNDERRUN	BIT1
+#define TXSTATUS_FIFO_EMPTY	BIT0
+
+#define DICR_MASTER		BIT15
+#define DICR_TRANSMIT		BIT0
+#define DICR_RECEIVE		BIT1
+
+#define usc_EnableDmaInterrupts(a,b) \
+	usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) )
+
+#define usc_DisableDmaInterrupts(a,b) \
+	usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) )
+
+#define usc_EnableStatusIrqs(a,b) \
+	usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) )
+
+#define usc_DisablestatusIrqs(a,b) \
+	usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) )
+
+/* Transmit status Bits in Transmit Control status Register (TCSR) */
+/* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */
+
+
+#define DISABLE_UNCONDITIONAL    0
+#define DISABLE_END_OF_FRAME     1
+#define ENABLE_UNCONDITIONAL     2
+#define ENABLE_AUTO_CTS          3
+#define ENABLE_AUTO_DCD          3
+#define usc_EnableTransmitter(a,b) \
+	usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) )
+#define usc_EnableReceiver(a,b) \
+	usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) )
+
+static u16  usc_InDmaReg( struct mgsl_struct *info, u16 Port );
+static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value );
+static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd );
+
+static u16  usc_InReg( struct mgsl_struct *info, u16 Port );
+static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value );
+static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd );
+void usc_RCmd( struct mgsl_struct *info, u16 Cmd );
+void usc_TCmd( struct mgsl_struct *info, u16 Cmd );
+
+#define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b)))
+#define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b))
+
+#define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1))
+
+static void usc_process_rxoverrun_sync( struct mgsl_struct *info );
+static void usc_start_receiver( struct mgsl_struct *info );
+static void usc_stop_receiver( struct mgsl_struct *info );
+
+static void usc_start_transmitter( struct mgsl_struct *info );
+static void usc_stop_transmitter( struct mgsl_struct *info );
+static void usc_set_txidle( struct mgsl_struct *info );
+static void usc_load_txfifo( struct mgsl_struct *info );
+
+static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate );
+static void usc_enable_loopback( struct mgsl_struct *info, int enable );
+
+static void usc_get_serial_signals( struct mgsl_struct *info );
+static void usc_set_serial_signals( struct mgsl_struct *info );
+
+static void usc_reset( struct mgsl_struct *info );
+
+static void usc_set_sync_mode( struct mgsl_struct *info );
+static void usc_set_sdlc_mode( struct mgsl_struct *info );
+static void usc_set_async_mode( struct mgsl_struct *info );
+static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate );
+
+static void usc_loopback_frame( struct mgsl_struct *info );
+
+static void mgsl_tx_timeout(unsigned long context);
+
+
+static void usc_loopmode_cancel_transmit( struct mgsl_struct * info );
+static void usc_loopmode_insert_request( struct mgsl_struct * info );
+static int usc_loopmode_active( struct mgsl_struct * info);
+static void usc_loopmode_send_done( struct mgsl_struct * info );
+
+static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg);
+
+#if SYNCLINK_GENERIC_HDLC
+#define dev_to_port(D) (dev_to_hdlc(D)->priv)
+static void hdlcdev_tx_done(struct mgsl_struct *info);
+static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size);
+static int  hdlcdev_init(struct mgsl_struct *info);
+static void hdlcdev_exit(struct mgsl_struct *info);
+#endif
+
+/*
+ * Defines a BUS descriptor value for the PCI adapter
+ * local bus address ranges.
+ */
+
+#define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \
+(0x00400020 + \
+((WrHold) << 30) + \
+((WrDly)  << 28) + \
+((RdDly)  << 26) + \
+((Nwdd)   << 20) + \
+((Nwad)   << 15) + \
+((Nxda)   << 13) + \
+((Nrdd)   << 11) + \
+((Nrad)   <<  6) )
+
+static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit);
+
+/*
+ * Adapter diagnostic routines
+ */
+static bool mgsl_register_test( struct mgsl_struct *info );
+static bool mgsl_irq_test( struct mgsl_struct *info );
+static bool mgsl_dma_test( struct mgsl_struct *info );
+static bool mgsl_memory_test( struct mgsl_struct *info );
+static int mgsl_adapter_test( struct mgsl_struct *info );
+
+/*
+ * device and resource management routines
+ */
+static int mgsl_claim_resources(struct mgsl_struct *info);
+static void mgsl_release_resources(struct mgsl_struct *info);
+static void mgsl_add_device(struct mgsl_struct *info);
+static struct mgsl_struct* mgsl_allocate_device(void);
+
+/*
+ * DMA buffer manupulation functions.
+ */
+static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex );
+static bool mgsl_get_rx_frame( struct mgsl_struct *info );
+static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info );
+static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info );
+static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info );
+static int num_free_tx_dma_buffers(struct mgsl_struct *info);
+static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize);
+static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count);
+
+/*
+ * DMA and Shared Memory buffer allocation and formatting
+ */
+static int  mgsl_allocate_dma_buffers(struct mgsl_struct *info);
+static void mgsl_free_dma_buffers(struct mgsl_struct *info);
+static int  mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
+static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
+static int  mgsl_alloc_buffer_list_memory(struct mgsl_struct *info);
+static void mgsl_free_buffer_list_memory(struct mgsl_struct *info);
+static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info);
+static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info);
+static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info);
+static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info);
+static bool load_next_tx_holding_buffer(struct mgsl_struct *info);
+static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize);
+
+/*
+ * Bottom half interrupt handlers
+ */
+static void mgsl_bh_handler(struct work_struct *work);
+static void mgsl_bh_receive(struct mgsl_struct *info);
+static void mgsl_bh_transmit(struct mgsl_struct *info);
+static void mgsl_bh_status(struct mgsl_struct *info);
+
+/*
+ * Interrupt handler routines and dispatch table.
+ */
+static void mgsl_isr_null( struct mgsl_struct *info );
+static void mgsl_isr_transmit_data( struct mgsl_struct *info );
+static void mgsl_isr_receive_data( struct mgsl_struct *info );
+static void mgsl_isr_receive_status( struct mgsl_struct *info );
+static void mgsl_isr_transmit_status( struct mgsl_struct *info );
+static void mgsl_isr_io_pin( struct mgsl_struct *info );
+static void mgsl_isr_misc( struct mgsl_struct *info );
+static void mgsl_isr_receive_dma( struct mgsl_struct *info );
+static void mgsl_isr_transmit_dma( struct mgsl_struct *info );
+
+typedef void (*isr_dispatch_func)(struct mgsl_struct *);
+
+static isr_dispatch_func UscIsrTable[7] =
+{
+	mgsl_isr_null,
+	mgsl_isr_misc,
+	mgsl_isr_io_pin,
+	mgsl_isr_transmit_data,
+	mgsl_isr_transmit_status,
+	mgsl_isr_receive_data,
+	mgsl_isr_receive_status
+};
+
+/*
+ * ioctl call handlers
+ */
+static int tiocmget(struct tty_struct *tty);
+static int tiocmset(struct tty_struct *tty,
+		    unsigned int set, unsigned int clear);
+static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount
+	__user *user_icount);
+static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS  __user *user_params);
+static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS  __user *new_params);
+static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode);
+static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode);
+static int mgsl_txenable(struct mgsl_struct * info, int enable);
+static int mgsl_txabort(struct mgsl_struct * info);
+static int mgsl_rxenable(struct mgsl_struct * info, int enable);
+static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask);
+static int mgsl_loopmode_send_done( struct mgsl_struct * info );
+
+/* set non-zero on successful registration with PCI subsystem */
+static bool pci_registered;
+
+/*
+ * Global linked list of SyncLink devices
+ */
+static struct mgsl_struct *mgsl_device_list;
+static int mgsl_device_count;
+
+/*
+ * Set this param to non-zero to load eax with the
+ * .text section address and breakpoint on module load.
+ * This is useful for use with gdb and add-symbol-file command.
+ */
+static int break_on_load;
+
+/*
+ * Driver major number, defaults to zero to get auto
+ * assigned major number. May be forced as module parameter.
+ */
+static int ttymajor;
+
+/*
+ * Array of user specified options for ISA adapters.
+ */
+static int io[MAX_ISA_DEVICES];
+static int irq[MAX_ISA_DEVICES];
+static int dma[MAX_ISA_DEVICES];
+static int debug_level;
+static int maxframe[MAX_TOTAL_DEVICES];
+static int txdmabufs[MAX_TOTAL_DEVICES];
+static int txholdbufs[MAX_TOTAL_DEVICES];
+	
+module_param(break_on_load, bool, 0);
+module_param(ttymajor, int, 0);
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(dma, int, NULL, 0);
+module_param(debug_level, int, 0);
+module_param_array(maxframe, int, NULL, 0);
+module_param_array(txdmabufs, int, NULL, 0);
+module_param_array(txholdbufs, int, NULL, 0);
+
+static char *driver_name = "SyncLink serial driver";
+static char *driver_version = "$Revision: 4.38 $";
+
+static int synclink_init_one (struct pci_dev *dev,
+				     const struct pci_device_id *ent);
+static void synclink_remove_one (struct pci_dev *dev);
+
+static struct pci_device_id synclink_pci_tbl[] = {
+	{ PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, }, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, synclink_pci_tbl);
+
+MODULE_LICENSE("GPL");
+
+static struct pci_driver synclink_pci_driver = {
+	.name		= "synclink",
+	.id_table	= synclink_pci_tbl,
+	.probe		= synclink_init_one,
+	.remove		= __devexit_p(synclink_remove_one),
+};
+
+static struct tty_driver *serial_driver;
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+
+static void mgsl_change_params(struct mgsl_struct *info);
+static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout);
+
+/*
+ * 1st function defined in .text section. Calling this function in
+ * init_module() followed by a breakpoint allows a remote debugger
+ * (gdb) to get the .text address for the add-symbol-file command.
+ * This allows remote debugging of dynamically loadable modules.
+ */
+static void* mgsl_get_text_ptr(void)
+{
+	return mgsl_get_text_ptr;
+}
+
+static inline int mgsl_paranoia_check(struct mgsl_struct *info,
+					char *name, const char *routine)
+{
+#ifdef MGSL_PARANOIA_CHECK
+	static const char *badmagic =
+		"Warning: bad magic number for mgsl struct (%s) in %s\n";
+	static const char *badinfo =
+		"Warning: null mgsl_struct for (%s) in %s\n";
+
+	if (!info) {
+		printk(badinfo, name, routine);
+		return 1;
+	}
+	if (info->magic != MGSL_MAGIC) {
+		printk(badmagic, name, routine);
+		return 1;
+	}
+#else
+	if (!info)
+		return 1;
+#endif
+	return 0;
+}
+
+/**
+ * line discipline callback wrappers
+ *
+ * The wrappers maintain line discipline references
+ * while calling into the line discipline.
+ *
+ * ldisc_receive_buf  - pass receive data to line discipline
+ */
+
+static void ldisc_receive_buf(struct tty_struct *tty,
+			      const __u8 *data, char *flags, int count)
+{
+	struct tty_ldisc *ld;
+	if (!tty)
+		return;
+	ld = tty_ldisc_ref(tty);
+	if (ld) {
+		if (ld->ops->receive_buf)
+			ld->ops->receive_buf(tty, data, flags, count);
+		tty_ldisc_deref(ld);
+	}
+}
+
+/* mgsl_stop()		throttle (stop) transmitter
+ * 	
+ * Arguments:		tty	pointer to tty info structure
+ * Return Value:	None
+ */
+static void mgsl_stop(struct tty_struct *tty)
+{
+	struct mgsl_struct *info = tty->driver_data;
+	unsigned long flags;
+	
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_stop"))
+		return;
+	
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("mgsl_stop(%s)\n",info->device_name);	
+		
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	if (info->tx_enabled)
+	 	usc_stop_transmitter(info);
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	
+}	/* end of mgsl_stop() */
+
+/* mgsl_start()		release (start) transmitter
+ * 	
+ * Arguments:		tty	pointer to tty info structure
+ * Return Value:	None
+ */
+static void mgsl_start(struct tty_struct *tty)
+{
+	struct mgsl_struct *info = tty->driver_data;
+	unsigned long flags;
+	
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_start"))
+		return;
+	
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("mgsl_start(%s)\n",info->device_name);	
+		
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	if (!info->tx_enabled)
+	 	usc_start_transmitter(info);
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	
+}	/* end of mgsl_start() */
+
+/*
+ * Bottom half work queue access functions
+ */
+
+/* mgsl_bh_action()	Return next bottom half action to perform.
+ * Return Value:	BH action code or 0 if nothing to do.
+ */
+static int mgsl_bh_action(struct mgsl_struct *info)
+{
+	unsigned long flags;
+	int rc = 0;
+	
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+
+	if (info->pending_bh & BH_RECEIVE) {
+		info->pending_bh &= ~BH_RECEIVE;
+		rc = BH_RECEIVE;
+	} else if (info->pending_bh & BH_TRANSMIT) {
+		info->pending_bh &= ~BH_TRANSMIT;
+		rc = BH_TRANSMIT;
+	} else if (info->pending_bh & BH_STATUS) {
+		info->pending_bh &= ~BH_STATUS;
+		rc = BH_STATUS;
+	}
+
+	if (!rc) {
+		/* Mark BH routine as complete */
+		info->bh_running = false;
+		info->bh_requested = false;
+	}
+	
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	
+	return rc;
+}
+
+/*
+ * 	Perform bottom half processing of work items queued by ISR.
+ */
+static void mgsl_bh_handler(struct work_struct *work)
+{
+	struct mgsl_struct *info =
+		container_of(work, struct mgsl_struct, task);
+	int action;
+
+	if (!info)
+		return;
+		
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
+			__FILE__,__LINE__,info->device_name);
+	
+	info->bh_running = true;
+
+	while((action = mgsl_bh_action(info)) != 0) {
+	
+		/* Process work item */
+		if ( debug_level >= DEBUG_LEVEL_BH )
+			printk( "%s(%d):mgsl_bh_handler() work item action=%d\n",
+				__FILE__,__LINE__,action);
+
+		switch (action) {
+		
+		case BH_RECEIVE:
+			mgsl_bh_receive(info);
+			break;
+		case BH_TRANSMIT:
+			mgsl_bh_transmit(info);
+			break;
+		case BH_STATUS:
+			mgsl_bh_status(info);
+			break;
+		default:
+			/* unknown work item ID */
+			printk("Unknown work item ID=%08X!\n", action);
+			break;
+		}
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):mgsl_bh_handler(%s) exit\n",
+			__FILE__,__LINE__,info->device_name);
+}
+
+static void mgsl_bh_receive(struct mgsl_struct *info)
+{
+	bool (*get_rx_frame)(struct mgsl_struct *info) =
+		(info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame);
+
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):mgsl_bh_receive(%s)\n",
+			__FILE__,__LINE__,info->device_name);
+	
+	do
+	{
+		if (info->rx_rcc_underrun) {
+			unsigned long flags;
+			spin_lock_irqsave(&info->irq_spinlock,flags);
+			usc_start_receiver(info);
+			spin_unlock_irqrestore(&info->irq_spinlock,flags);
+			return;
+		}
+	} while(get_rx_frame(info));
+}
+
+static void mgsl_bh_transmit(struct mgsl_struct *info)
+{
+	struct tty_struct *tty = info->port.tty;
+	unsigned long flags;
+	
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
+			__FILE__,__LINE__,info->device_name);
+
+	if (tty)
+		tty_wakeup(tty);
+
+	/* if transmitter idle and loopmode_send_done_requested
+	 * then start echoing RxD to TxD
+	 */
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+ 	if ( !info->tx_active && info->loopmode_send_done_requested )
+ 		usc_loopmode_send_done( info );
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+}
+
+static void mgsl_bh_status(struct mgsl_struct *info)
+{
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):mgsl_bh_status() entry on %s\n",
+			__FILE__,__LINE__,info->device_name);
+
+	info->ri_chkcount = 0;
+	info->dsr_chkcount = 0;
+	info->dcd_chkcount = 0;
+	info->cts_chkcount = 0;
+}
+
+/* mgsl_isr_receive_status()
+ * 
+ *	Service a receive status interrupt. The type of status
+ *	interrupt is indicated by the state of the RCSR.
+ *	This is only used for HDLC mode.
+ *
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_isr_receive_status( struct mgsl_struct *info )
+{
+	u16 status = usc_InReg( info, RCSR );
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )	
+		printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
+			__FILE__,__LINE__,status);
+			
+ 	if ( (status & RXSTATUS_ABORT_RECEIVED) && 
+		info->loopmode_insert_requested &&
+ 		usc_loopmode_active(info) )
+ 	{
+		++info->icount.rxabort;
+	 	info->loopmode_insert_requested = false;
+ 
+ 		/* clear CMR:13 to start echoing RxD to TxD */
+		info->cmr_value &= ~BIT13;
+ 		usc_OutReg(info, CMR, info->cmr_value);
+ 
+		/* disable received abort irq (no longer required) */
+	 	usc_OutReg(info, RICR,
+ 			(usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
+ 	}
+
+	if (status & (RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)) {
+		if (status & RXSTATUS_EXITED_HUNT)
+			info->icount.exithunt++;
+		if (status & RXSTATUS_IDLE_RECEIVED)
+			info->icount.rxidle++;
+		wake_up_interruptible(&info->event_wait_q);
+	}
+
+	if (status & RXSTATUS_OVERRUN){
+		info->icount.rxover++;
+		usc_process_rxoverrun_sync( info );
+	}
+
+	usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
+	usc_UnlatchRxstatusBits( info, status );
+
+}	/* end of mgsl_isr_receive_status() */
+
+/* mgsl_isr_transmit_status()
+ * 
+ * 	Service a transmit status interrupt
+ *	HDLC mode :end of transmit frame
+ *	Async mode:all data is sent
+ * 	transmit status is indicated by bits in the TCSR.
+ * 
+ * Arguments:		info	       pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_isr_transmit_status( struct mgsl_struct *info )
+{
+	u16 status = usc_InReg( info, TCSR );
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )	
+		printk("%s(%d):mgsl_isr_transmit_status status=%04X\n",
+			__FILE__,__LINE__,status);
+	
+	usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
+	usc_UnlatchTxstatusBits( info, status );
+	
+	if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) )
+	{
+		/* finished sending HDLC abort. This may leave	*/
+		/* the TxFifo with data from the aborted frame	*/
+		/* so purge the TxFifo. Also shutdown the DMA	*/
+		/* channel in case there is data remaining in 	*/
+		/* the DMA buffer				*/
+ 		usc_DmaCmd( info, DmaCmd_ResetTxChannel );
+ 		usc_RTCmd( info, RTCmd_PurgeTxFifo );
+	}
+ 
+	if ( status & TXSTATUS_EOF_SENT )
+		info->icount.txok++;
+	else if ( status & TXSTATUS_UNDERRUN )
+		info->icount.txunder++;
+	else if ( status & TXSTATUS_ABORT_SENT )
+		info->icount.txabort++;
+	else
+		info->icount.txunder++;
+			
+	info->tx_active = false;
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+	del_timer(&info->tx_timer);	
+	
+	if ( info->drop_rts_on_tx_done ) {
+		usc_get_serial_signals( info );
+		if ( info->serial_signals & SerialSignal_RTS ) {
+			info->serial_signals &= ~SerialSignal_RTS;
+			usc_set_serial_signals( info );
+		}
+		info->drop_rts_on_tx_done = false;
+	}
+
+#if SYNCLINK_GENERIC_HDLC
+	if (info->netcount)
+		hdlcdev_tx_done(info);
+	else 
+#endif
+	{
+		if (info->port.tty->stopped || info->port.tty->hw_stopped) {
+			usc_stop_transmitter(info);
+			return;
+		}
+		info->pending_bh |= BH_TRANSMIT;
+	}
+
+}	/* end of mgsl_isr_transmit_status() */
+
+/* mgsl_isr_io_pin()
+ * 
+ * 	Service an Input/Output pin interrupt. The type of
+ * 	interrupt is indicated by bits in the MISR
+ * 	
+ * Arguments:		info	       pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_isr_io_pin( struct mgsl_struct *info )
+{
+ 	struct	mgsl_icount *icount;
+	u16 status = usc_InReg( info, MISR );
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )	
+		printk("%s(%d):mgsl_isr_io_pin status=%04X\n",
+			__FILE__,__LINE__,status);
+			
+	usc_ClearIrqPendingBits( info, IO_PIN );
+	usc_UnlatchIostatusBits( info, status );
+
+	if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
+	              MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
+		icount = &info->icount;
+		/* update input line counters */
+		if (status & MISCSTATUS_RI_LATCHED) {
+			if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+				usc_DisablestatusIrqs(info,SICR_RI);
+			icount->rng++;
+			if ( status & MISCSTATUS_RI )
+				info->input_signal_events.ri_up++;	
+			else
+				info->input_signal_events.ri_down++;	
+		}
+		if (status & MISCSTATUS_DSR_LATCHED) {
+			if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+				usc_DisablestatusIrqs(info,SICR_DSR);
+			icount->dsr++;
+			if ( status & MISCSTATUS_DSR )
+				info->input_signal_events.dsr_up++;
+			else
+				info->input_signal_events.dsr_down++;
+		}
+		if (status & MISCSTATUS_DCD_LATCHED) {
+			if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+				usc_DisablestatusIrqs(info,SICR_DCD);
+			icount->dcd++;
+			if (status & MISCSTATUS_DCD) {
+				info->input_signal_events.dcd_up++;
+			} else
+				info->input_signal_events.dcd_down++;
+#if SYNCLINK_GENERIC_HDLC
+			if (info->netcount) {
+				if (status & MISCSTATUS_DCD)
+					netif_carrier_on(info->netdev);
+				else
+					netif_carrier_off(info->netdev);
+			}
+#endif
+		}
+		if (status & MISCSTATUS_CTS_LATCHED)
+		{
+			if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
+				usc_DisablestatusIrqs(info,SICR_CTS);
+			icount->cts++;
+			if ( status & MISCSTATUS_CTS )
+				info->input_signal_events.cts_up++;
+			else
+				info->input_signal_events.cts_down++;
+		}
+		wake_up_interruptible(&info->status_event_wait_q);
+		wake_up_interruptible(&info->event_wait_q);
+
+		if ( (info->port.flags & ASYNC_CHECK_CD) && 
+		     (status & MISCSTATUS_DCD_LATCHED) ) {
+			if ( debug_level >= DEBUG_LEVEL_ISR )
+				printk("%s CD now %s...", info->device_name,
+				       (status & MISCSTATUS_DCD) ? "on" : "off");
+			if (status & MISCSTATUS_DCD)
+				wake_up_interruptible(&info->port.open_wait);
+			else {
+				if ( debug_level >= DEBUG_LEVEL_ISR )
+					printk("doing serial hangup...");
+				if (info->port.tty)
+					tty_hangup(info->port.tty);
+			}
+		}
+	
+		if ( (info->port.flags & ASYNC_CTS_FLOW) && 
+		     (status & MISCSTATUS_CTS_LATCHED) ) {
+			if (info->port.tty->hw_stopped) {
+				if (status & MISCSTATUS_CTS) {
+					if ( debug_level >= DEBUG_LEVEL_ISR )
+						printk("CTS tx start...");
+					if (info->port.tty)
+						info->port.tty->hw_stopped = 0;
+					usc_start_transmitter(info);
+					info->pending_bh |= BH_TRANSMIT;
+					return;
+				}
+			} else {
+				if (!(status & MISCSTATUS_CTS)) {
+					if ( debug_level >= DEBUG_LEVEL_ISR )
+						printk("CTS tx stop...");
+					if (info->port.tty)
+						info->port.tty->hw_stopped = 1;
+					usc_stop_transmitter(info);
+				}
+			}
+		}
+	}
+
+	info->pending_bh |= BH_STATUS;
+	
+	/* for diagnostics set IRQ flag */
+	if ( status & MISCSTATUS_TXC_LATCHED ){
+		usc_OutReg( info, SICR,
+			(unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) );
+		usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED );
+		info->irq_occurred = true;
+	}
+
+}	/* end of mgsl_isr_io_pin() */
+
+/* mgsl_isr_transmit_data()
+ * 
+ * 	Service a transmit data interrupt (async mode only).
+ * 
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_isr_transmit_data( struct mgsl_struct *info )
+{
+	if ( debug_level >= DEBUG_LEVEL_ISR )	
+		printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n",
+			__FILE__,__LINE__,info->xmit_cnt);
+			
+	usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
+	
+	if (info->port.tty->stopped || info->port.tty->hw_stopped) {
+		usc_stop_transmitter(info);
+		return;
+	}
+	
+	if ( info->xmit_cnt )
+		usc_load_txfifo( info );
+	else
+		info->tx_active = false;
+		
+	if (info->xmit_cnt < WAKEUP_CHARS)
+		info->pending_bh |= BH_TRANSMIT;
+
+}	/* end of mgsl_isr_transmit_data() */
+
+/* mgsl_isr_receive_data()
+ * 
+ * 	Service a receive data interrupt. This occurs
+ * 	when operating in asynchronous interrupt transfer mode.
+ *	The receive data FIFO is flushed to the receive data buffers. 
+ * 
+ * Arguments:		info		pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_isr_receive_data( struct mgsl_struct *info )
+{
+	int Fifocount;
+	u16 status;
+	int work = 0;
+	unsigned char DataByte;
+ 	struct tty_struct *tty = info->port.tty;
+ 	struct	mgsl_icount *icount = &info->icount;
+	
+	if ( debug_level >= DEBUG_LEVEL_ISR )	
+		printk("%s(%d):mgsl_isr_receive_data\n",
+			__FILE__,__LINE__);
+
+	usc_ClearIrqPendingBits( info, RECEIVE_DATA );
+	
+	/* select FIFO status for RICR readback */
+	usc_RCmd( info, RCmd_SelectRicrRxFifostatus );
+
+	/* clear the Wordstatus bit so that status readback */
+	/* only reflects the status of this byte */
+	usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 ));
+
+	/* flush the receive FIFO */
+
+	while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) {
+		int flag;
+
+		/* read one byte from RxFIFO */
+		outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY),
+		      info->io_base + CCAR );
+		DataByte = inb( info->io_base + CCAR );
+
+		/* get the status of the received byte */
+		status = usc_InReg(info, RCSR);
+		if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
+				RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) )
+			usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
+		
+		icount->rx++;
+		
+		flag = 0;
+		if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
+				RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) {
+			printk("rxerr=%04X\n",status);					
+			/* update error statistics */
+			if ( status & RXSTATUS_BREAK_RECEIVED ) {
+				status &= ~(RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR);
+				icount->brk++;
+			} else if (status & RXSTATUS_PARITY_ERROR) 
+				icount->parity++;
+			else if (status & RXSTATUS_FRAMING_ERROR)
+				icount->frame++;
+			else if (status & RXSTATUS_OVERRUN) {
+				/* must issue purge fifo cmd before */
+				/* 16C32 accepts more receive chars */
+				usc_RTCmd(info,RTCmd_PurgeRxFifo);
+				icount->overrun++;
+			}
+
+			/* discard char if tty control flags say so */					
+			if (status & info->ignore_status_mask)
+				continue;
+				
+			status &= info->read_status_mask;
+		
+			if (status & RXSTATUS_BREAK_RECEIVED) {
+				flag = TTY_BREAK;
+				if (info->port.flags & ASYNC_SAK)
+					do_SAK(tty);
+			} else if (status & RXSTATUS_PARITY_ERROR)
+				flag = TTY_PARITY;
+			else if (status & RXSTATUS_FRAMING_ERROR)
+				flag = TTY_FRAME;
+		}	/* end of if (error) */
+		tty_insert_flip_char(tty, DataByte, flag);
+		if (status & RXSTATUS_OVERRUN) {
+			/* Overrun is special, since it's
+			 * reported immediately, and doesn't
+			 * affect the current character
+			 */
+			work += tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		}
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_ISR ) {
+		printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
+			__FILE__,__LINE__,icount->rx,icount->brk,
+			icount->parity,icount->frame,icount->overrun);
+	}
+			
+	if(work)
+		tty_flip_buffer_push(tty);
+}
+
+/* mgsl_isr_misc()
+ * 
+ * 	Service a miscellaneous interrupt source.
+ * 	
+ * Arguments:		info		pointer to device extension (instance data)
+ * Return Value:	None
+ */
+static void mgsl_isr_misc( struct mgsl_struct *info )
+{
+	u16 status = usc_InReg( info, MISR );
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )	
+		printk("%s(%d):mgsl_isr_misc status=%04X\n",
+			__FILE__,__LINE__,status);
+			
+	if ((status & MISCSTATUS_RCC_UNDERRUN) &&
+	    (info->params.mode == MGSL_MODE_HDLC)) {
+
+		/* turn off receiver and rx DMA */
+		usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
+		usc_DmaCmd(info, DmaCmd_ResetRxChannel);
+		usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
+		usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
+		usc_DisableInterrupts(info, RECEIVE_DATA + RECEIVE_STATUS);
+
+		/* schedule BH handler to restart receiver */
+		info->pending_bh |= BH_RECEIVE;
+		info->rx_rcc_underrun = true;
+	}
+
+	usc_ClearIrqPendingBits( info, MISC );
+	usc_UnlatchMiscstatusBits( info, status );
+
+}	/* end of mgsl_isr_misc() */
+
+/* mgsl_isr_null()
+ *
+ * 	Services undefined interrupt vectors from the
+ * 	USC. (hence this function SHOULD never be called)
+ * 
+ * Arguments:		info		pointer to device extension (instance data)
+ * Return Value:	None
+ */
+static void mgsl_isr_null( struct mgsl_struct *info )
+{
+
+}	/* end of mgsl_isr_null() */
+
+/* mgsl_isr_receive_dma()
+ * 
+ * 	Service a receive DMA channel interrupt.
+ * 	For this driver there are two sources of receive DMA interrupts
+ * 	as identified in the Receive DMA mode Register (RDMR):
+ * 
+ * 	BIT3	EOA/EOL		End of List, all receive buffers in receive
+ * 				buffer list have been filled (no more free buffers
+ * 				available). The DMA controller has shut down.
+ * 
+ * 	BIT2	EOB		End of Buffer. This interrupt occurs when a receive
+ * 				DMA buffer is terminated in response to completion
+ * 				of a good frame or a frame with errors. The status
+ * 				of the frame is stored in the buffer entry in the
+ * 				list of receive buffer entries.
+ * 
+ * Arguments:		info		pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_isr_receive_dma( struct mgsl_struct *info )
+{
+	u16 status;
+	
+	/* clear interrupt pending and IUS bit for Rx DMA IRQ */
+	usc_OutDmaReg( info, CDIR, BIT9+BIT1 );
+
+	/* Read the receive DMA status to identify interrupt type. */
+	/* This also clears the status bits. */
+	status = usc_InDmaReg( info, RDMR );
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )	
+		printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n",
+			__FILE__,__LINE__,info->device_name,status);
+			
+	info->pending_bh |= BH_RECEIVE;
+	
+	if ( status & BIT3 ) {
+		info->rx_overflow = true;
+		info->icount.buf_overrun++;
+	}
+
+}	/* end of mgsl_isr_receive_dma() */
+
+/* mgsl_isr_transmit_dma()
+ *
+ *	This function services a transmit DMA channel interrupt.
+ *
+ *	For this driver there is one source of transmit DMA interrupts
+ *	as identified in the Transmit DMA Mode Register (TDMR):
+ *
+ *     	BIT2  EOB       End of Buffer. This interrupt occurs when a
+ *     			transmit DMA buffer has been emptied.
+ *
+ *     	The driver maintains enough transmit DMA buffers to hold at least
+ *     	one max frame size transmit frame. When operating in a buffered
+ *     	transmit mode, there may be enough transmit DMA buffers to hold at
+ *     	least two or more max frame size frames. On an EOB condition,
+ *     	determine if there are any queued transmit buffers and copy into
+ *     	transmit DMA buffers if we have room.
+ *
+ * Arguments:		info		pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_isr_transmit_dma( struct mgsl_struct *info )
+{
+	u16 status;
+
+	/* clear interrupt pending and IUS bit for Tx DMA IRQ */
+	usc_OutDmaReg(info, CDIR, BIT8+BIT0 );
+
+	/* Read the transmit DMA status to identify interrupt type. */
+	/* This also clears the status bits. */
+
+	status = usc_InDmaReg( info, TDMR );
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n",
+			__FILE__,__LINE__,info->device_name,status);
+
+	if ( status & BIT2 ) {
+		--info->tx_dma_buffers_used;
+
+		/* if there are transmit frames queued,
+		 *  try to load the next one
+		 */
+		if ( load_next_tx_holding_buffer(info) ) {
+			/* if call returns non-zero value, we have
+			 * at least one free tx holding buffer
+			 */
+			info->pending_bh |= BH_TRANSMIT;
+		}
+	}
+
+}	/* end of mgsl_isr_transmit_dma() */
+
+/* mgsl_interrupt()
+ * 
+ * 	Interrupt service routine entry point.
+ * 	
+ * Arguments:
+ * 
+ * 	irq		interrupt number that caused interrupt
+ * 	dev_id		device ID supplied during interrupt registration
+ * 	
+ * Return Value: None
+ */
+static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
+{
+	struct mgsl_struct *info = dev_id;
+	u16 UscVector;
+	u16 DmaVector;
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )	
+		printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n",
+			__FILE__, __LINE__, info->irq_level);
+
+	spin_lock(&info->irq_spinlock);
+
+	for(;;) {
+		/* Read the interrupt vectors from hardware. */
+		UscVector = usc_InReg(info, IVR) >> 9;
+		DmaVector = usc_InDmaReg(info, DIVR);
+		
+		if ( debug_level >= DEBUG_LEVEL_ISR )	
+			printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n",
+				__FILE__,__LINE__,info->device_name,UscVector,DmaVector);
+			
+		if ( !UscVector && !DmaVector )
+			break;
+			
+		/* Dispatch interrupt vector */
+		if ( UscVector )
+			(*UscIsrTable[UscVector])(info);
+		else if ( (DmaVector&(BIT10|BIT9)) == BIT10)
+			mgsl_isr_transmit_dma(info);
+		else
+			mgsl_isr_receive_dma(info);
+
+		if ( info->isr_overflow ) {
+			printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n",
+				__FILE__, __LINE__, info->device_name, info->irq_level);
+			usc_DisableMasterIrqBit(info);
+			usc_DisableDmaInterrupts(info,DICR_MASTER);
+			break;
+		}
+	}
+	
+	/* Request bottom half processing if there's something 
+	 * for it to do and the bh is not already running
+	 */
+
+	if ( info->pending_bh && !info->bh_running && !info->bh_requested ) {
+		if ( debug_level >= DEBUG_LEVEL_ISR )	
+			printk("%s(%d):%s queueing bh task.\n",
+				__FILE__,__LINE__,info->device_name);
+		schedule_work(&info->task);
+		info->bh_requested = true;
+	}
+
+	spin_unlock(&info->irq_spinlock);
+	
+	if ( debug_level >= DEBUG_LEVEL_ISR )	
+		printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n",
+			__FILE__, __LINE__, info->irq_level);
+
+	return IRQ_HANDLED;
+}	/* end of mgsl_interrupt() */
+
+/* startup()
+ * 
+ * 	Initialize and start device.
+ * 	
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	0 if success, otherwise error code
+ */
+static int startup(struct mgsl_struct * info)
+{
+	int retval = 0;
+	
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
+		
+	if (info->port.flags & ASYNC_INITIALIZED)
+		return 0;
+	
+	if (!info->xmit_buf) {
+		/* allocate a page of memory for a transmit buffer */
+		info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
+		if (!info->xmit_buf) {
+			printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
+				__FILE__,__LINE__,info->device_name);
+			return -ENOMEM;
+		}
+	}
+
+	info->pending_bh = 0;
+	
+	memset(&info->icount, 0, sizeof(info->icount));
+
+	setup_timer(&info->tx_timer, mgsl_tx_timeout, (unsigned long)info);
+	
+	/* Allocate and claim adapter resources */
+	retval = mgsl_claim_resources(info);
+	
+	/* perform existence check and diagnostics */
+	if ( !retval )
+		retval = mgsl_adapter_test(info);
+		
+	if ( retval ) {
+  		if (capable(CAP_SYS_ADMIN) && info->port.tty)
+			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		mgsl_release_resources(info);
+  		return retval;
+  	}
+
+	/* program hardware for current parameters */
+	mgsl_change_params(info);
+	
+	if (info->port.tty)
+		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+
+	info->port.flags |= ASYNC_INITIALIZED;
+	
+	return 0;
+	
+}	/* end of startup() */
+
+/* shutdown()
+ *
+ * Called by mgsl_close() and mgsl_hangup() to shutdown hardware
+ *
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void shutdown(struct mgsl_struct * info)
+{
+	unsigned long flags;
+	
+	if (!(info->port.flags & ASYNC_INITIALIZED))
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_shutdown(%s)\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	/* clear status wait queue because status changes */
+	/* can't happen after shutting down the hardware */
+	wake_up_interruptible(&info->status_event_wait_q);
+	wake_up_interruptible(&info->event_wait_q);
+
+	del_timer_sync(&info->tx_timer);
+
+	if (info->xmit_buf) {
+		free_page((unsigned long) info->xmit_buf);
+		info->xmit_buf = NULL;
+	}
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	usc_DisableMasterIrqBit(info);
+	usc_stop_receiver(info);
+	usc_stop_transmitter(info);
+	usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS +
+		TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC );
+	usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
+	
+	/* Disable DMAEN (Port 7, Bit 14) */
+	/* This disconnects the DMA request signal from the ISA bus */
+	/* on the ISA adapter. This has no effect for the PCI adapter */
+	usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
+	
+	/* Disable INTEN (Port 6, Bit12) */
+	/* This disconnects the IRQ request signal to the ISA bus */
+	/* on the ISA adapter. This has no effect for the PCI adapter */
+	usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
+	
+ 	if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+ 		info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+		usc_set_serial_signals(info);
+	}
+	
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	mgsl_release_resources(info);	
+	
+	if (info->port.tty)
+		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+
+	info->port.flags &= ~ASYNC_INITIALIZED;
+	
+}	/* end of shutdown() */
+
+static void mgsl_program_hw(struct mgsl_struct *info)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	
+	usc_stop_receiver(info);
+	usc_stop_transmitter(info);
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+	
+	if (info->params.mode == MGSL_MODE_HDLC ||
+	    info->params.mode == MGSL_MODE_RAW ||
+	    info->netcount)
+		usc_set_sync_mode(info);
+	else
+		usc_set_async_mode(info);
+		
+	usc_set_serial_signals(info);
+	
+	info->dcd_chkcount = 0;
+	info->cts_chkcount = 0;
+	info->ri_chkcount = 0;
+	info->dsr_chkcount = 0;
+
+	usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);		
+	usc_EnableInterrupts(info, IO_PIN);
+	usc_get_serial_signals(info);
+		
+	if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
+		usc_start_receiver(info);
+		
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+}
+
+/* Reconfigure adapter based on new parameters
+ */
+static void mgsl_change_params(struct mgsl_struct *info)
+{
+	unsigned cflag;
+	int bits_per_char;
+
+	if (!info->port.tty || !info->port.tty->termios)
+		return;
+		
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_change_params(%s)\n",
+			 __FILE__,__LINE__, info->device_name );
+			 
+	cflag = info->port.tty->termios->c_cflag;
+
+	/* if B0 rate (hangup) specified then negate DTR and RTS */
+	/* otherwise assert DTR and RTS */
+ 	if (cflag & CBAUD)
+		info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+	
+	/* byte size and parity */
+	
+	switch (cflag & CSIZE) {
+	      case CS5: info->params.data_bits = 5; break;
+	      case CS6: info->params.data_bits = 6; break;
+	      case CS7: info->params.data_bits = 7; break;
+	      case CS8: info->params.data_bits = 8; break;
+	      /* Never happens, but GCC is too dumb to figure it out */
+	      default:  info->params.data_bits = 7; break;
+	      }
+	      
+	if (cflag & CSTOPB)
+		info->params.stop_bits = 2;
+	else
+		info->params.stop_bits = 1;
+
+	info->params.parity = ASYNC_PARITY_NONE;
+	if (cflag & PARENB) {
+		if (cflag & PARODD)
+			info->params.parity = ASYNC_PARITY_ODD;
+		else
+			info->params.parity = ASYNC_PARITY_EVEN;
+#ifdef CMSPAR
+		if (cflag & CMSPAR)
+			info->params.parity = ASYNC_PARITY_SPACE;
+#endif
+	}
+
+	/* calculate number of jiffies to transmit a full
+	 * FIFO (32 bytes) at specified data rate
+	 */
+	bits_per_char = info->params.data_bits + 
+			info->params.stop_bits + 1;
+
+	/* if port data rate is set to 460800 or less then
+	 * allow tty settings to override, otherwise keep the
+	 * current data rate.
+	 */
+	if (info->params.data_rate <= 460800)
+		info->params.data_rate = tty_get_baud_rate(info->port.tty);
+	
+	if ( info->params.data_rate ) {
+		info->timeout = (32*HZ*bits_per_char) / 
+				info->params.data_rate;
+	}
+	info->timeout += HZ/50;		/* Add .02 seconds of slop */
+
+	if (cflag & CRTSCTS)
+		info->port.flags |= ASYNC_CTS_FLOW;
+	else
+		info->port.flags &= ~ASYNC_CTS_FLOW;
+		
+	if (cflag & CLOCAL)
+		info->port.flags &= ~ASYNC_CHECK_CD;
+	else
+		info->port.flags |= ASYNC_CHECK_CD;
+
+	/* process tty input control flags */
+	
+	info->read_status_mask = RXSTATUS_OVERRUN;
+	if (I_INPCK(info->port.tty))
+		info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
+ 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+ 		info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
+	
+	if (I_IGNPAR(info->port.tty))
+		info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
+	if (I_IGNBRK(info->port.tty)) {
+		info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
+		/* If ignoring parity and break indicators, ignore 
+		 * overruns too.  (For real raw support).
+		 */
+		if (I_IGNPAR(info->port.tty))
+			info->ignore_status_mask |= RXSTATUS_OVERRUN;
+	}
+
+	mgsl_program_hw(info);
+
+}	/* end of mgsl_change_params() */
+
+/* mgsl_put_char()
+ * 
+ * 	Add a character to the transmit buffer.
+ * 	
+ * Arguments:		tty	pointer to tty information structure
+ * 			ch	character to add to transmit buffer
+ * 		
+ * Return Value:	None
+ */
+static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct mgsl_struct *info = tty->driver_data;
+	unsigned long flags;
+	int ret = 0;
+
+	if (debug_level >= DEBUG_LEVEL_INFO) {
+		printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
+			__FILE__, __LINE__, ch, info->device_name);
+	}		
+	
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
+		return 0;
+
+	if (!info->xmit_buf)
+		return 0;
+
+	spin_lock_irqsave(&info->irq_spinlock, flags);
+	
+	if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
+		if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
+			info->xmit_buf[info->xmit_head++] = ch;
+			info->xmit_head &= SERIAL_XMIT_SIZE-1;
+			info->xmit_cnt++;
+			ret = 1;
+		}
+	}
+	spin_unlock_irqrestore(&info->irq_spinlock, flags);
+	return ret;
+	
+}	/* end of mgsl_put_char() */
+
+/* mgsl_flush_chars()
+ * 
+ * 	Enable transmitter so remaining characters in the
+ * 	transmit buffer are sent.
+ * 	
+ * Arguments:		tty	pointer to tty information structure
+ * Return Value:	None
+ */
+static void mgsl_flush_chars(struct tty_struct *tty)
+{
+	struct mgsl_struct *info = tty->driver_data;
+	unsigned long flags;
+				
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n",
+			__FILE__,__LINE__,info->device_name,info->xmit_cnt);
+	
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars"))
+		return;
+
+	if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
+	    !info->xmit_buf)
+		return;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n",
+			__FILE__,__LINE__,info->device_name );
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	
+	if (!info->tx_active) {
+		if ( (info->params.mode == MGSL_MODE_HDLC ||
+			info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) {
+			/* operating in synchronous (frame oriented) mode */
+			/* copy data from circular xmit_buf to */
+			/* transmit DMA buffer. */
+			mgsl_load_tx_dma_buffer(info,
+				 info->xmit_buf,info->xmit_cnt);
+		}
+	 	usc_start_transmitter(info);
+	}
+	
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	
+}	/* end of mgsl_flush_chars() */
+
+/* mgsl_write()
+ * 
+ * 	Send a block of data
+ * 	
+ * Arguments:
+ * 
+ * 	tty		pointer to tty information structure
+ * 	buf		pointer to buffer containing send data
+ * 	count		size of send data in bytes
+ * 	
+ * Return Value:	number of characters written
+ */
+static int mgsl_write(struct tty_struct * tty,
+		    const unsigned char *buf, int count)
+{
+	int	c, ret = 0;
+	struct mgsl_struct *info = tty->driver_data;
+	unsigned long flags;
+	
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):mgsl_write(%s) count=%d\n",
+			__FILE__,__LINE__,info->device_name,count);
+	
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
+		goto cleanup;
+
+	if (!info->xmit_buf)
+		goto cleanup;
+
+	if ( info->params.mode == MGSL_MODE_HDLC ||
+			info->params.mode == MGSL_MODE_RAW ) {
+		/* operating in synchronous (frame oriented) mode */
+		/* operating in synchronous (frame oriented) mode */
+		if (info->tx_active) {
+
+			if ( info->params.mode == MGSL_MODE_HDLC ) {
+				ret = 0;
+				goto cleanup;
+			}
+			/* transmitter is actively sending data -
+			 * if we have multiple transmit dma and
+			 * holding buffers, attempt to queue this
+			 * frame for transmission at a later time.
+			 */
+			if (info->tx_holding_count >= info->num_tx_holding_buffers ) {
+				/* no tx holding buffers available */
+				ret = 0;
+				goto cleanup;
+			}
+
+			/* queue transmit frame request */
+			ret = count;
+			save_tx_buffer_request(info,buf,count);
+
+			/* if we have sufficient tx dma buffers,
+			 * load the next buffered tx request
+			 */
+			spin_lock_irqsave(&info->irq_spinlock,flags);
+			load_next_tx_holding_buffer(info);
+			spin_unlock_irqrestore(&info->irq_spinlock,flags);
+			goto cleanup;
+		}
+	
+		/* if operating in HDLC LoopMode and the adapter  */
+		/* has yet to be inserted into the loop, we can't */
+		/* transmit					  */
+
+		if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) &&
+			!usc_loopmode_active(info) )
+		{
+			ret = 0;
+			goto cleanup;
+		}
+
+		if ( info->xmit_cnt ) {
+			/* Send accumulated from send_char() calls */
+			/* as frame and wait before accepting more data. */
+			ret = 0;
+			
+			/* copy data from circular xmit_buf to */
+			/* transmit DMA buffer. */
+			mgsl_load_tx_dma_buffer(info,
+				info->xmit_buf,info->xmit_cnt);
+			if ( debug_level >= DEBUG_LEVEL_INFO )
+				printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n",
+					__FILE__,__LINE__,info->device_name);
+		} else {
+			if ( debug_level >= DEBUG_LEVEL_INFO )
+				printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n",
+					__FILE__,__LINE__,info->device_name);
+			ret = count;
+			info->xmit_cnt = count;
+			mgsl_load_tx_dma_buffer(info,buf,count);
+		}
+	} else {
+		while (1) {
+			spin_lock_irqsave(&info->irq_spinlock,flags);
+			c = min_t(int, count,
+				min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+				    SERIAL_XMIT_SIZE - info->xmit_head));
+			if (c <= 0) {
+				spin_unlock_irqrestore(&info->irq_spinlock,flags);
+				break;
+			}
+			memcpy(info->xmit_buf + info->xmit_head, buf, c);
+			info->xmit_head = ((info->xmit_head + c) &
+					   (SERIAL_XMIT_SIZE-1));
+			info->xmit_cnt += c;
+			spin_unlock_irqrestore(&info->irq_spinlock,flags);
+			buf += c;
+			count -= c;
+			ret += c;
+		}
+	}	
+	
+ 	if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+		if (!info->tx_active)
+		 	usc_start_transmitter(info);
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ 	}
+cleanup:	
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):mgsl_write(%s) returning=%d\n",
+			__FILE__,__LINE__,info->device_name,ret);
+			
+	return ret;
+	
+}	/* end of mgsl_write() */
+
+/* mgsl_write_room()
+ *
+ *	Return the count of free bytes in transmit buffer
+ * 	
+ * Arguments:		tty	pointer to tty info structure
+ * Return Value:	None
+ */
+static int mgsl_write_room(struct tty_struct *tty)
+{
+	struct mgsl_struct *info = tty->driver_data;
+	int	ret;
+				
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room"))
+		return 0;
+	ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
+	if (ret < 0)
+		ret = 0;
+		
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_write_room(%s)=%d\n",
+			 __FILE__,__LINE__, info->device_name,ret );
+			 
+	if ( info->params.mode == MGSL_MODE_HDLC ||
+		info->params.mode == MGSL_MODE_RAW ) {
+		/* operating in synchronous (frame oriented) mode */
+		if ( info->tx_active )
+			return 0;
+		else
+			return HDLC_MAX_FRAME_SIZE;
+	}
+	
+	return ret;
+	
+}	/* end of mgsl_write_room() */
+
+/* mgsl_chars_in_buffer()
+ *
+ *	Return the count of bytes in transmit buffer
+ * 	
+ * Arguments:		tty	pointer to tty info structure
+ * Return Value:	None
+ */
+static int mgsl_chars_in_buffer(struct tty_struct *tty)
+{
+	struct mgsl_struct *info = tty->driver_data;
+			 
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_chars_in_buffer(%s)\n",
+			 __FILE__,__LINE__, info->device_name );
+			 
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer"))
+		return 0;
+		
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n",
+			 __FILE__,__LINE__, info->device_name,info->xmit_cnt );
+			 
+	if ( info->params.mode == MGSL_MODE_HDLC ||
+		info->params.mode == MGSL_MODE_RAW ) {
+		/* operating in synchronous (frame oriented) mode */
+		if ( info->tx_active )
+			return info->max_frame_size;
+		else
+			return 0;
+	}
+			 
+	return info->xmit_cnt;
+}	/* end of mgsl_chars_in_buffer() */
+
+/* mgsl_flush_buffer()
+ *
+ *	Discard all data in the send buffer
+ * 	
+ * Arguments:		tty	pointer to tty info structure
+ * Return Value:	None
+ */
+static void mgsl_flush_buffer(struct tty_struct *tty)
+{
+	struct mgsl_struct *info = tty->driver_data;
+	unsigned long flags;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_flush_buffer(%s) entry\n",
+			 __FILE__,__LINE__, info->device_name );
+	
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer"))
+		return;
+		
+	spin_lock_irqsave(&info->irq_spinlock,flags); 
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+	del_timer(&info->tx_timer);	
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	
+	tty_wakeup(tty);
+}
+
+/* mgsl_send_xchar()
+ *
+ *	Send a high-priority XON/XOFF character
+ * 	
+ * Arguments:		tty	pointer to tty info structure
+ *			ch	character to send
+ * Return Value:	None
+ */
+static void mgsl_send_xchar(struct tty_struct *tty, char ch)
+{
+	struct mgsl_struct *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_send_xchar(%s,%d)\n",
+			 __FILE__,__LINE__, info->device_name, ch );
+			 
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar"))
+		return;
+
+	info->x_char = ch;
+	if (ch) {
+		/* Make sure transmit interrupts are on */
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+		if (!info->tx_enabled)
+		 	usc_start_transmitter(info);
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	}
+}	/* end of mgsl_send_xchar() */
+
+/* mgsl_throttle()
+ * 
+ * 	Signal remote device to throttle send data (our receive data)
+ * 	
+ * Arguments:		tty	pointer to tty info structure
+ * Return Value:	None
+ */
+static void mgsl_throttle(struct tty_struct * tty)
+{
+	struct mgsl_struct *info = tty->driver_data;
+	unsigned long flags;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_throttle(%s) entry\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle"))
+		return;
+	
+	if (I_IXOFF(tty))
+		mgsl_send_xchar(tty, STOP_CHAR(tty));
+ 
+ 	if (tty->termios->c_cflag & CRTSCTS) {
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+		info->serial_signals &= ~SerialSignal_RTS;
+	 	usc_set_serial_signals(info);
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	}
+}	/* end of mgsl_throttle() */
+
+/* mgsl_unthrottle()
+ * 
+ * 	Signal remote device to stop throttling send data (our receive data)
+ * 	
+ * Arguments:		tty	pointer to tty info structure
+ * Return Value:	None
+ */
+static void mgsl_unthrottle(struct tty_struct * tty)
+{
+	struct mgsl_struct *info = tty->driver_data;
+	unsigned long flags;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_unthrottle(%s) entry\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle"))
+		return;
+	
+	if (I_IXOFF(tty)) {
+		if (info->x_char)
+			info->x_char = 0;
+		else
+			mgsl_send_xchar(tty, START_CHAR(tty));
+	}
+	
+ 	if (tty->termios->c_cflag & CRTSCTS) {
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+		info->serial_signals |= SerialSignal_RTS;
+	 	usc_set_serial_signals(info);
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	}
+	
+}	/* end of mgsl_unthrottle() */
+
+/* mgsl_get_stats()
+ * 
+ * 	get the current serial parameters information
+ *
+ * Arguments:	info		pointer to device instance data
+ * 		user_icount	pointer to buffer to hold returned stats
+ * 	
+ * Return Value:	0 if success, otherwise error code
+ */
+static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount)
+{
+	int err;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_get_params(%s)\n",
+			 __FILE__,__LINE__, info->device_name);
+			
+	if (!user_icount) {
+		memset(&info->icount, 0, sizeof(info->icount));
+	} else {
+		mutex_lock(&info->port.mutex);
+		COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
+		mutex_unlock(&info->port.mutex);
+		if (err)
+			return -EFAULT;
+	}
+	
+	return 0;
+	
+}	/* end of mgsl_get_stats() */
+
+/* mgsl_get_params()
+ * 
+ * 	get the current serial parameters information
+ *
+ * Arguments:	info		pointer to device instance data
+ * 		user_params	pointer to buffer to hold returned params
+ * 	
+ * Return Value:	0 if success, otherwise error code
+ */
+static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params)
+{
+	int err;
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_get_params(%s)\n",
+			 __FILE__,__LINE__, info->device_name);
+			
+	mutex_lock(&info->port.mutex);
+	COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
+	mutex_unlock(&info->port.mutex);
+	if (err) {
+		if ( debug_level >= DEBUG_LEVEL_INFO )
+			printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",
+				__FILE__,__LINE__,info->device_name);
+		return -EFAULT;
+	}
+	
+	return 0;
+	
+}	/* end of mgsl_get_params() */
+
+/* mgsl_set_params()
+ * 
+ * 	set the serial parameters
+ * 	
+ * Arguments:
+ * 
+ * 	info		pointer to device instance data
+ * 	new_params	user buffer containing new serial params
+ *
+ * Return Value:	0 if success, otherwise error code
+ */
+static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params)
+{
+ 	unsigned long flags;
+	MGSL_PARAMS tmp_params;
+	int err;
+ 
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__,
+			info->device_name );
+	COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
+	if (err) {
+		if ( debug_level >= DEBUG_LEVEL_INFO )
+			printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n",
+				__FILE__,__LINE__,info->device_name);
+		return -EFAULT;
+	}
+	
+	mutex_lock(&info->port.mutex);
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	
+ 	mgsl_change_params(info);
+	mutex_unlock(&info->port.mutex);
+	
+	return 0;
+	
+}	/* end of mgsl_set_params() */
+
+/* mgsl_get_txidle()
+ * 
+ * 	get the current transmit idle mode
+ *
+ * Arguments:	info		pointer to device instance data
+ * 		idle_mode	pointer to buffer to hold returned idle mode
+ * 	
+ * Return Value:	0 if success, otherwise error code
+ */
+static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
+{
+	int err;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_get_txidle(%s)=%d\n",
+			 __FILE__,__LINE__, info->device_name, info->idle_mode);
+			
+	COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
+	if (err) {
+		if ( debug_level >= DEBUG_LEVEL_INFO )
+			printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n",
+				__FILE__,__LINE__,info->device_name);
+		return -EFAULT;
+	}
+	
+	return 0;
+	
+}	/* end of mgsl_get_txidle() */
+
+/* mgsl_set_txidle()	service ioctl to set transmit idle mode
+ * 	
+ * Arguments:	 	info		pointer to device instance data
+ * 			idle_mode	new idle mode
+ *
+ * Return Value:	0 if success, otherwise error code
+ */
+static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
+{
+ 	unsigned long flags;
+ 
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__,
+			info->device_name, idle_mode );
+			
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	info->idle_mode = idle_mode;
+	usc_set_txidle( info );
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	return 0;
+	
+}	/* end of mgsl_set_txidle() */
+
+/* mgsl_txenable()
+ * 
+ * 	enable or disable the transmitter
+ * 	
+ * Arguments:
+ * 
+ * 	info		pointer to device instance data
+ * 	enable		1 = enable, 0 = disable
+ *
+ * Return Value:	0 if success, otherwise error code
+ */
+static int mgsl_txenable(struct mgsl_struct * info, int enable)
+{
+ 	unsigned long flags;
+ 
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__,
+			info->device_name, enable);
+			
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	if ( enable ) {
+		if ( !info->tx_enabled ) {
+
+			usc_start_transmitter(info);
+			/*--------------------------------------------------
+			 * if HDLC/SDLC Loop mode, attempt to insert the
+			 * station in the 'loop' by setting CMR:13. Upon
+			 * receipt of the next GoAhead (RxAbort) sequence,
+			 * the OnLoop indicator (CCSR:7) should go active
+			 * to indicate that we are on the loop
+			 *--------------------------------------------------*/
+			if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+				usc_loopmode_insert_request( info );
+		}
+	} else {
+		if ( info->tx_enabled )
+			usc_stop_transmitter(info);
+	}
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	return 0;
+	
+}	/* end of mgsl_txenable() */
+
+/* mgsl_txabort()	abort send HDLC frame
+ * 	
+ * Arguments:	 	info		pointer to device instance data
+ * Return Value:	0 if success, otherwise error code
+ */
+static int mgsl_txabort(struct mgsl_struct * info)
+{
+ 	unsigned long flags;
+ 
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__,
+			info->device_name);
+			
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
+	{
+		if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+			usc_loopmode_cancel_transmit( info );
+		else
+			usc_TCmd(info,TCmd_SendAbort);
+	}
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	return 0;
+	
+}	/* end of mgsl_txabort() */
+
+/* mgsl_rxenable() 	enable or disable the receiver
+ * 	
+ * Arguments:	 	info		pointer to device instance data
+ * 			enable		1 = enable, 0 = disable
+ * Return Value:	0 if success, otherwise error code
+ */
+static int mgsl_rxenable(struct mgsl_struct * info, int enable)
+{
+ 	unsigned long flags;
+ 
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__,
+			info->device_name, enable);
+			
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	if ( enable ) {
+		if ( !info->rx_enabled )
+			usc_start_receiver(info);
+	} else {
+		if ( info->rx_enabled )
+			usc_stop_receiver(info);
+	}
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	return 0;
+	
+}	/* end of mgsl_rxenable() */
+
+/* mgsl_wait_event() 	wait for specified event to occur
+ * 	
+ * Arguments:	 	info	pointer to device instance data
+ * 			mask	pointer to bitmask of events to wait for
+ * Return Value:	0 	if successful and bit mask updated with
+ *				of events triggerred,
+ * 			otherwise error code
+ */
+static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
+{
+ 	unsigned long flags;
+	int s;
+	int rc=0;
+	struct mgsl_icount cprev, cnow;
+	int events;
+	int mask;
+	struct	_input_signal_events oldsigs, newsigs;
+	DECLARE_WAITQUEUE(wait, current);
+
+	COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
+	if (rc) {
+		return  -EFAULT;
+	}
+		 
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
+			info->device_name, mask);
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+
+	/* return immediately if state matches requested events */
+	usc_get_serial_signals(info);
+	s = info->serial_signals;
+	events = mask &
+		( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
+ 		  ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
+		  ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
+		  ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
+	if (events) {
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+		goto exit;
+	}
+
+	/* save current irq counts */
+	cprev = info->icount;
+	oldsigs = info->input_signal_events;
+	
+	/* enable hunt and idle irqs if needed */
+	if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
+		u16 oldreg = usc_InReg(info,RICR);
+		u16 newreg = oldreg +
+			 (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) +
+			 (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0);
+		if (oldreg != newreg)
+			usc_OutReg(info, RICR, newreg);
+	}
+	
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&info->event_wait_q, &wait);
+	
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	
+
+	for(;;) {
+		schedule();
+		if (signal_pending(current)) {
+			rc = -ERESTARTSYS;
+			break;
+		}
+			
+		/* get current irq counts */
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+		cnow = info->icount;
+		newsigs = info->input_signal_events;
+		set_current_state(TASK_INTERRUPTIBLE);
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+		/* if no change, wait aborted for some reason */
+		if (newsigs.dsr_up   == oldsigs.dsr_up   &&
+		    newsigs.dsr_down == oldsigs.dsr_down &&
+		    newsigs.dcd_up   == oldsigs.dcd_up   &&
+		    newsigs.dcd_down == oldsigs.dcd_down &&
+		    newsigs.cts_up   == oldsigs.cts_up   &&
+		    newsigs.cts_down == oldsigs.cts_down &&
+		    newsigs.ri_up    == oldsigs.ri_up    &&
+		    newsigs.ri_down  == oldsigs.ri_down  &&
+		    cnow.exithunt    == cprev.exithunt   &&
+		    cnow.rxidle      == cprev.rxidle) {
+			rc = -EIO;
+			break;
+		}
+
+		events = mask &
+			( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
+			(newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
+			(newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
+			(newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
+			(newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
+			(newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
+			(newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
+			(newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
+			(cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
+			  (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
+		if (events)
+			break;
+		
+		cprev = cnow;
+		oldsigs = newsigs;
+	}
+	
+	remove_wait_queue(&info->event_wait_q, &wait);
+	set_current_state(TASK_RUNNING);
+
+	if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+		if (!waitqueue_active(&info->event_wait_q)) {
+			/* disable enable exit hunt mode/idle rcvd IRQs */
+			usc_OutReg(info, RICR, usc_InReg(info,RICR) &
+				~(RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED));
+		}
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	}
+exit:
+	if ( rc == 0 )
+		PUT_USER(rc, events, mask_ptr);
+		
+	return rc;
+	
+}	/* end of mgsl_wait_event() */
+
+static int modem_input_wait(struct mgsl_struct *info,int arg)
+{
+ 	unsigned long flags;
+	int rc;
+	struct mgsl_icount cprev, cnow;
+	DECLARE_WAITQUEUE(wait, current);
+
+	/* save current irq counts */
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	cprev = info->icount;
+	add_wait_queue(&info->status_event_wait_q, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	for(;;) {
+		schedule();
+		if (signal_pending(current)) {
+			rc = -ERESTARTSYS;
+			break;
+		}
+
+		/* get new irq counts */
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+		cnow = info->icount;
+		set_current_state(TASK_INTERRUPTIBLE);
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+		/* if no change, wait aborted for some reason */
+		if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+		    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
+			rc = -EIO;
+			break;
+		}
+
+		/* check for change in caller specified modem input */
+		if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
+		    (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
+		    (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
+		    (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
+			rc = 0;
+			break;
+		}
+
+		cprev = cnow;
+	}
+	remove_wait_queue(&info->status_event_wait_q, &wait);
+	set_current_state(TASK_RUNNING);
+	return rc;
+}
+
+/* return the state of the serial control and status signals
+ */
+static int tiocmget(struct tty_struct *tty)
+{
+	struct mgsl_struct *info = tty->driver_data;
+	unsigned int result;
+ 	unsigned long flags;
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+ 	usc_get_serial_signals(info);
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
+		((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
+		((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
+		((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
+		((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
+		((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s tiocmget() value=%08X\n",
+			 __FILE__,__LINE__, info->device_name, result );
+	return result;
+}
+
+/* set modem control signals (DTR/RTS)
+ */
+static int tiocmset(struct tty_struct *tty,
+				    unsigned int set, unsigned int clear)
+{
+	struct mgsl_struct *info = tty->driver_data;
+ 	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s tiocmset(%x,%x)\n",
+			__FILE__,__LINE__,info->device_name, set, clear);
+
+	if (set & TIOCM_RTS)
+		info->serial_signals |= SerialSignal_RTS;
+	if (set & TIOCM_DTR)
+		info->serial_signals |= SerialSignal_DTR;
+	if (clear & TIOCM_RTS)
+		info->serial_signals &= ~SerialSignal_RTS;
+	if (clear & TIOCM_DTR)
+		info->serial_signals &= ~SerialSignal_DTR;
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+ 	usc_set_serial_signals(info);
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	return 0;
+}
+
+/* mgsl_break()		Set or clear transmit break condition
+ *
+ * Arguments:		tty		pointer to tty instance data
+ *			break_state	-1=set break condition, 0=clear
+ * Return Value:	error code
+ */
+static int mgsl_break(struct tty_struct *tty, int break_state)
+{
+	struct mgsl_struct * info = tty->driver_data;
+	unsigned long flags;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_break(%s,%d)\n",
+			 __FILE__,__LINE__, info->device_name, break_state);
+			 
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
+		return -EINVAL;
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+ 	if (break_state == -1)
+		usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7));
+	else 
+		usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	return 0;
+	
+}	/* end of mgsl_break() */
+
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int msgl_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+
+{
+	struct mgsl_struct * info = tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+	return 0;
+}
+
+/* mgsl_ioctl()	Service an IOCTL request
+ * 	
+ * Arguments:
+ * 
+ * 	tty	pointer to tty instance data
+ * 	cmd	IOCTL command code
+ * 	arg	command argument/context
+ * 	
+ * Return Value:	0 if success, otherwise error code
+ */
+static int mgsl_ioctl(struct tty_struct *tty,
+		    unsigned int cmd, unsigned long arg)
+{
+	struct mgsl_struct * info = tty->driver_data;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
+			info->device_name, cmd );
+	
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl"))
+		return -ENODEV;
+
+	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+	    (cmd != TIOCMIWAIT)) {
+		if (tty->flags & (1 << TTY_IO_ERROR))
+		    return -EIO;
+	}
+
+	return mgsl_ioctl_common(info, cmd, arg);
+}
+
+static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	
+	switch (cmd) {
+		case MGSL_IOCGPARAMS:
+			return mgsl_get_params(info, argp);
+		case MGSL_IOCSPARAMS:
+			return mgsl_set_params(info, argp);
+		case MGSL_IOCGTXIDLE:
+			return mgsl_get_txidle(info, argp);
+		case MGSL_IOCSTXIDLE:
+			return mgsl_set_txidle(info,(int)arg);
+		case MGSL_IOCTXENABLE:
+			return mgsl_txenable(info,(int)arg);
+		case MGSL_IOCRXENABLE:
+			return mgsl_rxenable(info,(int)arg);
+		case MGSL_IOCTXABORT:
+			return mgsl_txabort(info);
+		case MGSL_IOCGSTATS:
+			return mgsl_get_stats(info, argp);
+		case MGSL_IOCWAITEVENT:
+			return mgsl_wait_event(info, argp);
+		case MGSL_IOCLOOPTXDONE:
+			return mgsl_loopmode_send_done(info);
+		/* Wait for modem input (DCD,RI,DSR,CTS) change
+		 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
+		 */
+		case TIOCMIWAIT:
+			return modem_input_wait(info,(int)arg);
+
+		default:
+			return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+/* mgsl_set_termios()
+ * 
+ * 	Set new termios settings
+ * 	
+ * Arguments:
+ * 
+ * 	tty		pointer to tty structure
+ * 	termios		pointer to buffer to hold returned old termios
+ * 	
+ * Return Value:		None
+ */
+static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+	struct mgsl_struct *info = tty->driver_data;
+	unsigned long flags;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__,
+			tty->driver->name );
+	
+	mgsl_change_params(info);
+
+	/* Handle transition to B0 status */
+	if (old_termios->c_cflag & CBAUD &&
+	    !(tty->termios->c_cflag & CBAUD)) {
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+	 	usc_set_serial_signals(info);
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	}
+	
+	/* Handle transition away from B0 status */
+	if (!(old_termios->c_cflag & CBAUD) &&
+	    tty->termios->c_cflag & CBAUD) {
+		info->serial_signals |= SerialSignal_DTR;
+ 		if (!(tty->termios->c_cflag & CRTSCTS) || 
+ 		    !test_bit(TTY_THROTTLED, &tty->flags)) {
+			info->serial_signals |= SerialSignal_RTS;
+ 		}
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+	 	usc_set_serial_signals(info);
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	}
+	
+	/* Handle turning off CRTSCTS */
+	if (old_termios->c_cflag & CRTSCTS &&
+	    !(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		mgsl_start(tty);
+	}
+
+}	/* end of mgsl_set_termios() */
+
+/* mgsl_close()
+ * 
+ * 	Called when port is closed. Wait for remaining data to be
+ * 	sent. Disable port and free resources.
+ * 	
+ * Arguments:
+ * 
+ * 	tty	pointer to open tty structure
+ * 	filp	pointer to open file object
+ * 	
+ * Return Value:	None
+ */
+static void mgsl_close(struct tty_struct *tty, struct file * filp)
+{
+	struct mgsl_struct * info = tty->driver_data;
+
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_close"))
+		return;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
+			 __FILE__,__LINE__, info->device_name, info->port.count);
+
+	if (tty_port_close_start(&info->port, tty, filp) == 0)			 
+		goto cleanup;
+
+	mutex_lock(&info->port.mutex);
+ 	if (info->port.flags & ASYNC_INITIALIZED)
+ 		mgsl_wait_until_sent(tty, info->timeout);
+	mgsl_flush_buffer(tty);
+	tty_ldisc_flush(tty);
+	shutdown(info);
+	mutex_unlock(&info->port.mutex);
+
+	tty_port_close_end(&info->port, tty);	
+	info->port.tty = NULL;
+cleanup:			
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
+			tty->driver->name, info->port.count);
+			
+}	/* end of mgsl_close() */
+
+/* mgsl_wait_until_sent()
+ *
+ *	Wait until the transmitter is empty.
+ *
+ * Arguments:
+ *
+ *	tty		pointer to tty info structure
+ *	timeout		time to wait for send completion
+ *
+ * Return Value:	None
+ */
+static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct mgsl_struct * info = tty->driver_data;
+	unsigned long orig_jiffies, char_time;
+
+	if (!info )
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_wait_until_sent(%s) entry\n",
+			 __FILE__,__LINE__, info->device_name );
+      
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
+		return;
+
+	if (!(info->port.flags & ASYNC_INITIALIZED))
+		goto exit;
+	 
+	orig_jiffies = jiffies;
+      
+	/* Set check interval to 1/5 of estimated time to
+	 * send a character, and make it at least 1. The check
+	 * interval should also be less than the timeout.
+	 * Note: use tight timings here to satisfy the NIST-PCTS.
+	 */ 
+
+	if ( info->params.data_rate ) {
+	       	char_time = info->timeout/(32 * 5);
+		if (!char_time)
+			char_time++;
+	} else
+		char_time = 1;
+		
+	if (timeout)
+		char_time = min_t(unsigned long, char_time, timeout);
+		
+	if ( info->params.mode == MGSL_MODE_HDLC ||
+		info->params.mode == MGSL_MODE_RAW ) {
+		while (info->tx_active) {
+			msleep_interruptible(jiffies_to_msecs(char_time));
+			if (signal_pending(current))
+				break;
+			if (timeout && time_after(jiffies, orig_jiffies + timeout))
+				break;
+		}
+	} else {
+		while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) &&
+			info->tx_enabled) {
+			msleep_interruptible(jiffies_to_msecs(char_time));
+			if (signal_pending(current))
+				break;
+			if (timeout && time_after(jiffies, orig_jiffies + timeout))
+				break;
+		}
+	}
+      
+exit:
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_wait_until_sent(%s) exit\n",
+			 __FILE__,__LINE__, info->device_name );
+			 
+}	/* end of mgsl_wait_until_sent() */
+
+/* mgsl_hangup()
+ *
+ *	Called by tty_hangup() when a hangup is signaled.
+ *	This is the same as to closing all open files for the port.
+ *
+ * Arguments:		tty	pointer to associated tty object
+ * Return Value:	None
+ */
+static void mgsl_hangup(struct tty_struct *tty)
+{
+	struct mgsl_struct * info = tty->driver_data;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_hangup(%s)\n",
+			 __FILE__,__LINE__, info->device_name );
+			 
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup"))
+		return;
+
+	mgsl_flush_buffer(tty);
+	shutdown(info);
+	
+	info->port.count = 0;	
+	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->port.tty = NULL;
+
+	wake_up_interruptible(&info->port.open_wait);
+	
+}	/* end of mgsl_hangup() */
+
+/*
+ * carrier_raised()
+ *
+ *	Return true if carrier is raised
+ */
+
+static int carrier_raised(struct tty_port *port)
+{
+	unsigned long flags;
+	struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
+	
+	spin_lock_irqsave(&info->irq_spinlock, flags);
+ 	usc_get_serial_signals(info);
+	spin_unlock_irqrestore(&info->irq_spinlock, flags);
+	return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
+}
+
+static void dtr_rts(struct tty_port *port, int on)
+{
+	struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	if (on)
+		info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ 	usc_set_serial_signals(info);
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+}
+
+
+/* block_til_ready()
+ * 
+ * 	Block the current process until the specified port
+ * 	is ready to be opened.
+ * 	
+ * Arguments:
+ * 
+ * 	tty		pointer to tty info structure
+ * 	filp		pointer to open file object
+ * 	info		pointer to device instance data
+ * 	
+ * Return Value:	0 if success, otherwise error code
+ */
+static int block_til_ready(struct tty_struct *tty, struct file * filp,
+			   struct mgsl_struct *info)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	int		retval;
+	bool		do_clocal = false;
+	bool		extra_count = false;
+	unsigned long	flags;
+	int		dcd;
+	struct tty_port *port = &info->port;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):block_til_ready on %s\n",
+			 __FILE__,__LINE__, tty->driver->name );
+
+	if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
+		/* nonblock mode is set or port is not enabled */
+		port->flags |= ASYNC_NORMAL_ACTIVE;
+		return 0;
+	}
+
+	if (tty->termios->c_cflag & CLOCAL)
+		do_clocal = true;
+
+	/* Wait for carrier detect and the line to become
+	 * free (i.e., not in use by the callout).  While we are in
+	 * this loop, port->count is dropped by one, so that
+	 * mgsl_close() knows when to free things.  We restore it upon
+	 * exit, either normal or abnormal.
+	 */
+	 
+	retval = 0;
+	add_wait_queue(&port->open_wait, &wait);
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):block_til_ready before block on %s count=%d\n",
+			 __FILE__,__LINE__, tty->driver->name, port->count );
+
+	spin_lock_irqsave(&info->irq_spinlock, flags);
+	if (!tty_hung_up_p(filp)) {
+		extra_count = true;
+		port->count--;
+	}
+	spin_unlock_irqrestore(&info->irq_spinlock, flags);
+	port->blocked_open++;
+	
+	while (1) {
+		if (tty->termios->c_cflag & CBAUD)
+			tty_port_raise_dtr_rts(port);
+		
+		set_current_state(TASK_INTERRUPTIBLE);
+		
+		if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
+			retval = (port->flags & ASYNC_HUP_NOTIFY) ?
+					-EAGAIN : -ERESTARTSYS;
+			break;
+		}
+		
+		dcd = tty_port_carrier_raised(&info->port);
+		
+ 		if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd))
+ 			break;
+			
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			break;
+		}
+		
+		if (debug_level >= DEBUG_LEVEL_INFO)
+			printk("%s(%d):block_til_ready blocking on %s count=%d\n",
+				 __FILE__,__LINE__, tty->driver->name, port->count );
+				 
+		tty_unlock();
+		schedule();
+		tty_lock();
+	}
+	
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&port->open_wait, &wait);
+	
+	/* FIXME: Racy on hangup during close wait */
+	if (extra_count)
+		port->count++;
+	port->blocked_open--;
+	
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
+			 __FILE__,__LINE__, tty->driver->name, port->count );
+			 
+	if (!retval)
+		port->flags |= ASYNC_NORMAL_ACTIVE;
+		
+	return retval;
+	
+}	/* end of block_til_ready() */
+
+/* mgsl_open()
+ *
+ *	Called when a port is opened.  Init and enable port.
+ *	Perform serial-specific initialization for the tty structure.
+ *
+ * Arguments:		tty	pointer to tty info structure
+ *			filp	associated file pointer
+ *
+ * Return Value:	0 if success, otherwise error code
+ */
+static int mgsl_open(struct tty_struct *tty, struct file * filp)
+{
+	struct mgsl_struct	*info;
+	int 			retval, line;
+	unsigned long flags;
+
+	/* verify range of specified line number */	
+	line = tty->index;
+	if ((line < 0) || (line >= mgsl_device_count)) {
+		printk("%s(%d):mgsl_open with invalid line #%d.\n",
+			__FILE__,__LINE__,line);
+		return -ENODEV;
+	}
+
+	/* find the info structure for the specified line */
+	info = mgsl_device_list;
+	while(info && info->line != line)
+		info = info->next_device;
+	if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
+		return -ENODEV;
+	
+	tty->driver_data = info;
+	info->port.tty = tty;
+		
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
+			 __FILE__,__LINE__,tty->driver->name, info->port.count);
+
+	/* If port is closing, signal caller to try again */
+	if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+		if (info->port.flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->port.close_wait);
+		retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
+			-EAGAIN : -ERESTARTSYS);
+		goto cleanup;
+	}
+	
+	info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+	spin_lock_irqsave(&info->netlock, flags);
+	if (info->netcount) {
+		retval = -EBUSY;
+		spin_unlock_irqrestore(&info->netlock, flags);
+		goto cleanup;
+	}
+	info->port.count++;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	if (info->port.count == 1) {
+		/* 1st open on this device, init hardware */
+		retval = startup(info);
+		if (retval < 0)
+			goto cleanup;
+	}
+
+	retval = block_til_ready(tty, filp, info);
+	if (retval) {
+		if (debug_level >= DEBUG_LEVEL_INFO)
+			printk("%s(%d):block_til_ready(%s) returned %d\n",
+				 __FILE__,__LINE__, info->device_name, retval);
+		goto cleanup;
+	}
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):mgsl_open(%s) success\n",
+			 __FILE__,__LINE__, info->device_name);
+	retval = 0;
+	
+cleanup:			
+	if (retval) {
+		if (tty->count == 1)
+			info->port.tty = NULL; /* tty layer will release tty struct */
+		if(info->port.count)
+			info->port.count--;
+	}
+	
+	return retval;
+	
+}	/* end of mgsl_open() */
+
+/*
+ * /proc fs routines....
+ */
+
+static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
+{
+	char	stat_buf[30];
+	unsigned long flags;
+
+	if (info->bus_type == MGSL_BUS_TYPE_PCI) {
+		seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X",
+			info->device_name, info->io_base, info->irq_level,
+			info->phys_memory_base, info->phys_lcr_base);
+	} else {
+		seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d",
+			info->device_name, info->io_base, 
+			info->irq_level, info->dma_level);
+	}
+
+	/* output current serial signal states */
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+ 	usc_get_serial_signals(info);
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	
+	stat_buf[0] = 0;
+	stat_buf[1] = 0;
+	if (info->serial_signals & SerialSignal_RTS)
+		strcat(stat_buf, "|RTS");
+	if (info->serial_signals & SerialSignal_CTS)
+		strcat(stat_buf, "|CTS");
+	if (info->serial_signals & SerialSignal_DTR)
+		strcat(stat_buf, "|DTR");
+	if (info->serial_signals & SerialSignal_DSR)
+		strcat(stat_buf, "|DSR");
+	if (info->serial_signals & SerialSignal_DCD)
+		strcat(stat_buf, "|CD");
+	if (info->serial_signals & SerialSignal_RI)
+		strcat(stat_buf, "|RI");
+
+	if (info->params.mode == MGSL_MODE_HDLC ||
+	    info->params.mode == MGSL_MODE_RAW ) {
+		seq_printf(m, " HDLC txok:%d rxok:%d",
+			      info->icount.txok, info->icount.rxok);
+		if (info->icount.txunder)
+			seq_printf(m, " txunder:%d", info->icount.txunder);
+		if (info->icount.txabort)
+			seq_printf(m, " txabort:%d", info->icount.txabort);
+		if (info->icount.rxshort)
+			seq_printf(m, " rxshort:%d", info->icount.rxshort);
+		if (info->icount.rxlong)
+			seq_printf(m, " rxlong:%d", info->icount.rxlong);
+		if (info->icount.rxover)
+			seq_printf(m, " rxover:%d", info->icount.rxover);
+		if (info->icount.rxcrc)
+			seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
+	} else {
+		seq_printf(m, " ASYNC tx:%d rx:%d",
+			      info->icount.tx, info->icount.rx);
+		if (info->icount.frame)
+			seq_printf(m, " fe:%d", info->icount.frame);
+		if (info->icount.parity)
+			seq_printf(m, " pe:%d", info->icount.parity);
+		if (info->icount.brk)
+			seq_printf(m, " brk:%d", info->icount.brk);
+		if (info->icount.overrun)
+			seq_printf(m, " oe:%d", info->icount.overrun);
+	}
+	
+	/* Append serial signal status to end */
+	seq_printf(m, " %s\n", stat_buf+1);
+	
+	seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
+	 info->tx_active,info->bh_requested,info->bh_running,
+	 info->pending_bh);
+	 
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	{	
+	u16 Tcsr = usc_InReg( info, TCSR );
+	u16 Tdmr = usc_InDmaReg( info, TDMR );
+	u16 Ticr = usc_InReg( info, TICR );
+	u16 Rscr = usc_InReg( info, RCSR );
+	u16 Rdmr = usc_InDmaReg( info, RDMR );
+	u16 Ricr = usc_InReg( info, RICR );
+	u16 Icr = usc_InReg( info, ICR );
+	u16 Dccr = usc_InReg( info, DCCR );
+	u16 Tmr = usc_InReg( info, TMR );
+	u16 Tccr = usc_InReg( info, TCCR );
+	u16 Ccar = inw( info->io_base + CCAR );
+	seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n"
+                        "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n",
+	 		Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar );
+	}
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+}
+
+/* Called to print information about devices */
+static int mgsl_proc_show(struct seq_file *m, void *v)
+{
+	struct mgsl_struct *info;
+	
+	seq_printf(m, "synclink driver:%s\n", driver_version);
+	
+	info = mgsl_device_list;
+	while( info ) {
+		line_info(m, info);
+		info = info->next_device;
+	}
+	return 0;
+}
+
+static int mgsl_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mgsl_proc_show, NULL);
+}
+
+static const struct file_operations mgsl_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= mgsl_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/* mgsl_allocate_dma_buffers()
+ * 
+ * 	Allocate and format DMA buffers (ISA adapter)
+ * 	or format shared memory buffers (PCI adapter).
+ * 
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	0 if success, otherwise error
+ */
+static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
+{
+	unsigned short BuffersPerFrame;
+
+	info->last_mem_alloc = 0;
+
+	/* Calculate the number of DMA buffers necessary to hold the */
+	/* largest allowable frame size. Note: If the max frame size is */
+	/* not an even multiple of the DMA buffer size then we need to */
+	/* round the buffer count per frame up one. */
+
+	BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE);
+	if ( info->max_frame_size % DMABUFFERSIZE )
+		BuffersPerFrame++;
+
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+		/*
+		 * The PCI adapter has 256KBytes of shared memory to use.
+		 * This is 64 PAGE_SIZE buffers.
+		 *
+		 * The first page is used for padding at this time so the
+		 * buffer list does not begin at offset 0 of the PCI
+		 * adapter's shared memory.
+		 *
+		 * The 2nd page is used for the buffer list. A 4K buffer
+		 * list can hold 128 DMA_BUFFER structures at 32 bytes
+		 * each.
+		 *
+		 * This leaves 62 4K pages.
+		 *
+		 * The next N pages are used for transmit frame(s). We
+		 * reserve enough 4K page blocks to hold the required
+		 * number of transmit dma buffers (num_tx_dma_buffers),
+		 * each of MaxFrameSize size.
+		 *
+		 * Of the remaining pages (62-N), determine how many can
+		 * be used to receive full MaxFrameSize inbound frames
+		 */
+		info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
+		info->rx_buffer_count = 62 - info->tx_buffer_count;
+	} else {
+		/* Calculate the number of PAGE_SIZE buffers needed for */
+		/* receive and transmit DMA buffers. */
+
+
+		/* Calculate the number of DMA buffers necessary to */
+		/* hold 7 max size receive frames and one max size transmit frame. */
+		/* The receive buffer count is bumped by one so we avoid an */
+		/* End of List condition if all receive buffers are used when */
+		/* using linked list DMA buffers. */
+
+		info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
+		info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6;
+		
+		/* 
+		 * limit total TxBuffers & RxBuffers to 62 4K total 
+		 * (ala PCI Allocation) 
+		 */
+		
+		if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 )
+			info->rx_buffer_count = 62 - info->tx_buffer_count;
+
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n",
+			__FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count);
+	
+	if ( mgsl_alloc_buffer_list_memory( info ) < 0 ||
+		  mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 || 
+		  mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 || 
+		  mgsl_alloc_intermediate_rxbuffer_memory(info) < 0  ||
+		  mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) {
+		printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__);
+		return -ENOMEM;
+	}
+	
+	mgsl_reset_rx_dma_buffers( info );
+  	mgsl_reset_tx_dma_buffers( info );
+
+	return 0;
+
+}	/* end of mgsl_allocate_dma_buffers() */
+
+/*
+ * mgsl_alloc_buffer_list_memory()
+ * 
+ * Allocate a common DMA buffer for use as the
+ * receive and transmit buffer lists.
+ * 
+ * A buffer list is a set of buffer entries where each entry contains
+ * a pointer to an actual buffer and a pointer to the next buffer entry
+ * (plus some other info about the buffer).
+ * 
+ * The buffer entries for a list are built to form a circular list so
+ * that when the entire list has been traversed you start back at the
+ * beginning.
+ * 
+ * This function allocates memory for just the buffer entries.
+ * The links (pointer to next entry) are filled in with the physical
+ * address of the next entry so the adapter can navigate the list
+ * using bus master DMA. The pointers to the actual buffers are filled
+ * out later when the actual buffers are allocated.
+ * 
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	0 if success, otherwise error
+ */
+static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
+{
+	unsigned int i;
+
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+		/* PCI adapter uses shared memory. */
+		info->buffer_list = info->memory_base + info->last_mem_alloc;
+		info->buffer_list_phys = info->last_mem_alloc;
+		info->last_mem_alloc += BUFFERLISTSIZE;
+	} else {
+		/* ISA adapter uses system memory. */
+		/* The buffer lists are allocated as a common buffer that both */
+		/* the processor and adapter can access. This allows the driver to */
+		/* inspect portions of the buffer while other portions are being */
+		/* updated by the adapter using Bus Master DMA. */
+
+		info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL);
+		if (info->buffer_list == NULL)
+			return -ENOMEM;
+		info->buffer_list_phys = (u32)(info->buffer_list_dma_addr);
+	}
+
+	/* We got the memory for the buffer entry lists. */
+	/* Initialize the memory block to all zeros. */
+	memset( info->buffer_list, 0, BUFFERLISTSIZE );
+
+	/* Save virtual address pointers to the receive and */
+	/* transmit buffer lists. (Receive 1st). These pointers will */
+	/* be used by the processor to access the lists. */
+	info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
+	info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
+	info->tx_buffer_list += info->rx_buffer_count;
+
+	/*
+	 * Build the links for the buffer entry lists such that
+	 * two circular lists are built. (Transmit and Receive).
+	 *
+	 * Note: the links are physical addresses
+	 * which are read by the adapter to determine the next
+	 * buffer entry to use.
+	 */
+
+	for ( i = 0; i < info->rx_buffer_count; i++ ) {
+		/* calculate and store physical address of this buffer entry */
+		info->rx_buffer_list[i].phys_entry =
+			info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY));
+
+		/* calculate and store physical address of */
+		/* next entry in cirular list of entries */
+
+		info->rx_buffer_list[i].link = info->buffer_list_phys;
+
+		if ( i < info->rx_buffer_count - 1 )
+			info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
+	}
+
+	for ( i = 0; i < info->tx_buffer_count; i++ ) {
+		/* calculate and store physical address of this buffer entry */
+		info->tx_buffer_list[i].phys_entry = info->buffer_list_phys +
+			((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY));
+
+		/* calculate and store physical address of */
+		/* next entry in cirular list of entries */
+
+		info->tx_buffer_list[i].link = info->buffer_list_phys +
+			info->rx_buffer_count * sizeof(DMABUFFERENTRY);
+
+		if ( i < info->tx_buffer_count - 1 )
+			info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
+	}
+
+	return 0;
+
+}	/* end of mgsl_alloc_buffer_list_memory() */
+
+/* Free DMA buffers allocated for use as the
+ * receive and transmit buffer lists.
+ * Warning:
+ * 
+ * 	The data transfer buffers associated with the buffer list
+ * 	MUST be freed before freeing the buffer list itself because
+ * 	the buffer list contains the information necessary to free
+ * 	the individual buffers!
+ */
+static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
+{
+	if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI)
+		dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr);
+		
+	info->buffer_list = NULL;
+	info->rx_buffer_list = NULL;
+	info->tx_buffer_list = NULL;
+
+}	/* end of mgsl_free_buffer_list_memory() */
+
+/*
+ * mgsl_alloc_frame_memory()
+ * 
+ * 	Allocate the frame DMA buffers used by the specified buffer list.
+ * 	Each DMA buffer will be one memory page in size. This is necessary
+ * 	because memory can fragment enough that it may be impossible
+ * 	contiguous pages.
+ * 
+ * Arguments:
+ * 
+ *	info		pointer to device instance data
+ * 	BufferList	pointer to list of buffer entries
+ * 	Buffercount	count of buffer entries in buffer list
+ * 
+ * Return Value:	0 if success, otherwise -ENOMEM
+ */
+static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
+{
+	int i;
+	u32 phys_addr;
+
+	/* Allocate page sized buffers for the receive buffer list */
+
+	for ( i = 0; i < Buffercount; i++ ) {
+		if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+			/* PCI adapter uses shared memory buffers. */
+			BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc;
+			phys_addr = info->last_mem_alloc;
+			info->last_mem_alloc += DMABUFFERSIZE;
+		} else {
+			/* ISA adapter uses system memory. */
+			BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL);
+			if (BufferList[i].virt_addr == NULL)
+				return -ENOMEM;
+			phys_addr = (u32)(BufferList[i].dma_addr);
+		}
+		BufferList[i].phys_addr = phys_addr;
+	}
+
+	return 0;
+
+}	/* end of mgsl_alloc_frame_memory() */
+
+/*
+ * mgsl_free_frame_memory()
+ * 
+ * 	Free the buffers associated with
+ * 	each buffer entry of a buffer list.
+ * 
+ * Arguments:
+ * 
+ *	info		pointer to device instance data
+ * 	BufferList	pointer to list of buffer entries
+ * 	Buffercount	count of buffer entries in buffer list
+ * 
+ * Return Value:	None
+ */
+static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount)
+{
+	int i;
+
+	if ( BufferList ) {
+		for ( i = 0 ; i < Buffercount ; i++ ) {
+			if ( BufferList[i].virt_addr ) {
+				if ( info->bus_type != MGSL_BUS_TYPE_PCI )
+					dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr);
+				BufferList[i].virt_addr = NULL;
+			}
+		}
+	}
+
+}	/* end of mgsl_free_frame_memory() */
+
+/* mgsl_free_dma_buffers()
+ * 
+ * 	Free DMA buffers
+ * 	
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_free_dma_buffers( struct mgsl_struct *info )
+{
+	mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count );
+	mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count );
+	mgsl_free_buffer_list_memory( info );
+
+}	/* end of mgsl_free_dma_buffers() */
+
+
+/*
+ * mgsl_alloc_intermediate_rxbuffer_memory()
+ * 
+ * 	Allocate a buffer large enough to hold max_frame_size. This buffer
+ *	is used to pass an assembled frame to the line discipline.
+ * 
+ * Arguments:
+ * 
+ *	info		pointer to device instance data
+ * 
+ * Return Value:	0 if success, otherwise -ENOMEM
+ */
+static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
+{
+	info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA);
+	if ( info->intermediate_rxbuffer == NULL )
+		return -ENOMEM;
+
+	return 0;
+
+}	/* end of mgsl_alloc_intermediate_rxbuffer_memory() */
+
+/*
+ * mgsl_free_intermediate_rxbuffer_memory()
+ * 
+ * 
+ * Arguments:
+ * 
+ *	info		pointer to device instance data
+ * 
+ * Return Value:	None
+ */
+static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info)
+{
+	kfree(info->intermediate_rxbuffer);
+	info->intermediate_rxbuffer = NULL;
+
+}	/* end of mgsl_free_intermediate_rxbuffer_memory() */
+
+/*
+ * mgsl_alloc_intermediate_txbuffer_memory()
+ *
+ * 	Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size.
+ * 	This buffer is used to load transmit frames into the adapter's dma transfer
+ * 	buffers when there is sufficient space.
+ *
+ * Arguments:
+ *
+ *	info		pointer to device instance data
+ *
+ * Return Value:	0 if success, otherwise -ENOMEM
+ */
+static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info)
+{
+	int i;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("%s %s(%d)  allocating %d tx holding buffers\n",
+				info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers);
+
+	memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers));
+
+	for ( i=0; i<info->num_tx_holding_buffers; ++i) {
+		info->tx_holding_buffers[i].buffer =
+			kmalloc(info->max_frame_size, GFP_KERNEL);
+		if (info->tx_holding_buffers[i].buffer == NULL) {
+			for (--i; i >= 0; i--) {
+				kfree(info->tx_holding_buffers[i].buffer);
+				info->tx_holding_buffers[i].buffer = NULL;
+			}
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+
+}	/* end of mgsl_alloc_intermediate_txbuffer_memory() */
+
+/*
+ * mgsl_free_intermediate_txbuffer_memory()
+ *
+ *
+ * Arguments:
+ *
+ *	info		pointer to device instance data
+ *
+ * Return Value:	None
+ */
+static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info)
+{
+	int i;
+
+	for ( i=0; i<info->num_tx_holding_buffers; ++i ) {
+		kfree(info->tx_holding_buffers[i].buffer);
+		info->tx_holding_buffers[i].buffer = NULL;
+	}
+
+	info->get_tx_holding_index = 0;
+	info->put_tx_holding_index = 0;
+	info->tx_holding_count = 0;
+
+}	/* end of mgsl_free_intermediate_txbuffer_memory() */
+
+
+/*
+ * load_next_tx_holding_buffer()
+ *
+ * attempts to load the next buffered tx request into the
+ * tx dma buffers
+ *
+ * Arguments:
+ *
+ *	info		pointer to device instance data
+ *
+ * Return Value:	true if next buffered tx request loaded
+ * 			into adapter's tx dma buffer,
+ * 			false otherwise
+ */
+static bool load_next_tx_holding_buffer(struct mgsl_struct *info)
+{
+	bool ret = false;
+
+	if ( info->tx_holding_count ) {
+		/* determine if we have enough tx dma buffers
+		 * to accommodate the next tx frame
+		 */
+		struct tx_holding_buffer *ptx =
+			&info->tx_holding_buffers[info->get_tx_holding_index];
+		int num_free = num_free_tx_dma_buffers(info);
+		int num_needed = ptx->buffer_size / DMABUFFERSIZE;
+		if ( ptx->buffer_size % DMABUFFERSIZE )
+			++num_needed;
+
+		if (num_needed <= num_free) {
+			info->xmit_cnt = ptx->buffer_size;
+			mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size);
+
+			--info->tx_holding_count;
+			if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers)
+				info->get_tx_holding_index=0;
+
+			/* restart transmit timer */
+			mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000));
+
+			ret = true;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * save_tx_buffer_request()
+ *
+ * attempt to store transmit frame request for later transmission
+ *
+ * Arguments:
+ *
+ *	info		pointer to device instance data
+ * 	Buffer		pointer to buffer containing frame to load
+ * 	BufferSize	size in bytes of frame in Buffer
+ *
+ * Return Value:	1 if able to store, 0 otherwise
+ */
+static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize)
+{
+	struct tx_holding_buffer *ptx;
+
+	if ( info->tx_holding_count >= info->num_tx_holding_buffers ) {
+		return 0;	        /* all buffers in use */
+	}
+
+	ptx = &info->tx_holding_buffers[info->put_tx_holding_index];
+	ptx->buffer_size = BufferSize;
+	memcpy( ptx->buffer, Buffer, BufferSize);
+
+	++info->tx_holding_count;
+	if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers)
+		info->put_tx_holding_index=0;
+
+	return 1;
+}
+
+static int mgsl_claim_resources(struct mgsl_struct *info)
+{
+	if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) {
+		printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->io_base);
+		return -ENODEV;
+	}
+	info->io_addr_requested = true;
+	
+	if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
+		info->device_name, info ) < 0 ) {
+		printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n",
+			__FILE__,__LINE__,info->device_name, info->irq_level );
+		goto errout;
+	}
+	info->irq_requested = true;
+	
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+		if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) {
+			printk( "%s(%d):mem addr conflict device %s Addr=%08X\n",
+				__FILE__,__LINE__,info->device_name, info->phys_memory_base);
+			goto errout;
+		}
+		info->shared_mem_requested = true;
+		if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) {
+			printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n",
+				__FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset);
+			goto errout;
+		}
+		info->lcr_mem_requested = true;
+
+		info->memory_base = ioremap_nocache(info->phys_memory_base,
+								0x40000);
+		if (!info->memory_base) {
+			printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n",
+				__FILE__,__LINE__,info->device_name, info->phys_memory_base );
+			goto errout;
+		}
+		
+		if ( !mgsl_memory_test(info) ) {
+			printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n",
+				__FILE__,__LINE__,info->device_name, info->phys_memory_base );
+			goto errout;
+		}
+		
+		info->lcr_base = ioremap_nocache(info->phys_lcr_base,
+								PAGE_SIZE);
+		if (!info->lcr_base) {
+			printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n",
+				__FILE__,__LINE__,info->device_name, info->phys_lcr_base );
+			goto errout;
+		}
+		info->lcr_base += info->lcr_offset;
+		
+	} else {
+		/* claim DMA channel */
+		
+		if (request_dma(info->dma_level,info->device_name) < 0){
+			printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n",
+				__FILE__,__LINE__,info->device_name, info->dma_level );
+			mgsl_release_resources( info );
+			return -ENODEV;
+		}
+		info->dma_requested = true;
+
+		/* ISA adapter uses bus master DMA */		
+		set_dma_mode(info->dma_level,DMA_MODE_CASCADE);
+		enable_dma(info->dma_level);
+	}
+	
+	if ( mgsl_allocate_dma_buffers(info) < 0 ) {
+		printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n",
+			__FILE__,__LINE__,info->device_name, info->dma_level );
+		goto errout;
+	}	
+	
+	return 0;
+errout:
+	mgsl_release_resources(info);
+	return -ENODEV;
+
+}	/* end of mgsl_claim_resources() */
+
+static void mgsl_release_resources(struct mgsl_struct *info)
+{
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):mgsl_release_resources(%s) entry\n",
+			__FILE__,__LINE__,info->device_name );
+			
+	if ( info->irq_requested ) {
+		free_irq(info->irq_level, info);
+		info->irq_requested = false;
+	}
+	if ( info->dma_requested ) {
+		disable_dma(info->dma_level);
+		free_dma(info->dma_level);
+		info->dma_requested = false;
+	}
+	mgsl_free_dma_buffers(info);
+	mgsl_free_intermediate_rxbuffer_memory(info);
+     	mgsl_free_intermediate_txbuffer_memory(info);
+	
+	if ( info->io_addr_requested ) {
+		release_region(info->io_base,info->io_addr_size);
+		info->io_addr_requested = false;
+	}
+	if ( info->shared_mem_requested ) {
+		release_mem_region(info->phys_memory_base,0x40000);
+		info->shared_mem_requested = false;
+	}
+	if ( info->lcr_mem_requested ) {
+		release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
+		info->lcr_mem_requested = false;
+	}
+	if (info->memory_base){
+		iounmap(info->memory_base);
+		info->memory_base = NULL;
+	}
+	if (info->lcr_base){
+		iounmap(info->lcr_base - info->lcr_offset);
+		info->lcr_base = NULL;
+	}
+	
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):mgsl_release_resources(%s) exit\n",
+			__FILE__,__LINE__,info->device_name );
+			
+}	/* end of mgsl_release_resources() */
+
+/* mgsl_add_device()
+ * 
+ * 	Add the specified device instance data structure to the
+ * 	global linked list of devices and increment the device count.
+ * 	
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_add_device( struct mgsl_struct *info )
+{
+	info->next_device = NULL;
+	info->line = mgsl_device_count;
+	sprintf(info->device_name,"ttySL%d",info->line);
+	
+	if (info->line < MAX_TOTAL_DEVICES) {
+		if (maxframe[info->line])
+			info->max_frame_size = maxframe[info->line];
+
+		if (txdmabufs[info->line]) {
+			info->num_tx_dma_buffers = txdmabufs[info->line];
+			if (info->num_tx_dma_buffers < 1)
+				info->num_tx_dma_buffers = 1;
+		}
+
+		if (txholdbufs[info->line]) {
+			info->num_tx_holding_buffers = txholdbufs[info->line];
+			if (info->num_tx_holding_buffers < 1)
+				info->num_tx_holding_buffers = 1;
+			else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS)
+				info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS;
+		}
+	}
+
+	mgsl_device_count++;
+	
+	if ( !mgsl_device_list )
+		mgsl_device_list = info;
+	else {	
+		struct mgsl_struct *current_dev = mgsl_device_list;
+		while( current_dev->next_device )
+			current_dev = current_dev->next_device;
+		current_dev->next_device = info;
+	}
+	
+	if ( info->max_frame_size < 4096 )
+		info->max_frame_size = 4096;
+	else if ( info->max_frame_size > 65535 )
+		info->max_frame_size = 65535;
+	
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+		printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
+			info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
+			info->phys_memory_base, info->phys_lcr_base,
+		     	info->max_frame_size );
+	} else {
+		printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n",
+			info->device_name, info->io_base, info->irq_level, info->dma_level,
+		     	info->max_frame_size );
+	}
+
+#if SYNCLINK_GENERIC_HDLC
+	hdlcdev_init(info);
+#endif
+
+}	/* end of mgsl_add_device() */
+
+static const struct tty_port_operations mgsl_port_ops = {
+	.carrier_raised = carrier_raised,
+	.dtr_rts = dtr_rts,
+};
+
+
+/* mgsl_allocate_device()
+ * 
+ * 	Allocate and initialize a device instance structure
+ * 	
+ * Arguments:		none
+ * Return Value:	pointer to mgsl_struct if success, otherwise NULL
+ */
+static struct mgsl_struct* mgsl_allocate_device(void)
+{
+	struct mgsl_struct *info;
+	
+	info = kzalloc(sizeof(struct mgsl_struct),
+		 GFP_KERNEL);
+		 
+	if (!info) {
+		printk("Error can't allocate device instance data\n");
+	} else {
+		tty_port_init(&info->port);
+		info->port.ops = &mgsl_port_ops;
+		info->magic = MGSL_MAGIC;
+		INIT_WORK(&info->task, mgsl_bh_handler);
+		info->max_frame_size = 4096;
+		info->port.close_delay = 5*HZ/10;
+		info->port.closing_wait = 30*HZ;
+		init_waitqueue_head(&info->status_event_wait_q);
+		init_waitqueue_head(&info->event_wait_q);
+		spin_lock_init(&info->irq_spinlock);
+		spin_lock_init(&info->netlock);
+		memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
+		info->idle_mode = HDLC_TXIDLE_FLAGS;		
+		info->num_tx_dma_buffers = 1;
+		info->num_tx_holding_buffers = 0;
+	}
+	
+	return info;
+
+}	/* end of mgsl_allocate_device()*/
+
+static const struct tty_operations mgsl_ops = {
+	.open = mgsl_open,
+	.close = mgsl_close,
+	.write = mgsl_write,
+	.put_char = mgsl_put_char,
+	.flush_chars = mgsl_flush_chars,
+	.write_room = mgsl_write_room,
+	.chars_in_buffer = mgsl_chars_in_buffer,
+	.flush_buffer = mgsl_flush_buffer,
+	.ioctl = mgsl_ioctl,
+	.throttle = mgsl_throttle,
+	.unthrottle = mgsl_unthrottle,
+	.send_xchar = mgsl_send_xchar,
+	.break_ctl = mgsl_break,
+	.wait_until_sent = mgsl_wait_until_sent,
+	.set_termios = mgsl_set_termios,
+	.stop = mgsl_stop,
+	.start = mgsl_start,
+	.hangup = mgsl_hangup,
+	.tiocmget = tiocmget,
+	.tiocmset = tiocmset,
+	.get_icount = msgl_get_icount,
+	.proc_fops = &mgsl_proc_fops,
+};
+
+/*
+ * perform tty device initialization
+ */
+static int mgsl_init_tty(void)
+{
+	int rc;
+
+	serial_driver = alloc_tty_driver(128);
+	if (!serial_driver)
+		return -ENOMEM;
+	
+	serial_driver->owner = THIS_MODULE;
+	serial_driver->driver_name = "synclink";
+	serial_driver->name = "ttySL";
+	serial_driver->major = ttymajor;
+	serial_driver->minor_start = 64;
+	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	serial_driver->subtype = SERIAL_TYPE_NORMAL;
+	serial_driver->init_termios = tty_std_termios;
+	serial_driver->init_termios.c_cflag =
+		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	serial_driver->init_termios.c_ispeed = 9600;
+	serial_driver->init_termios.c_ospeed = 9600;
+	serial_driver->flags = TTY_DRIVER_REAL_RAW;
+	tty_set_operations(serial_driver, &mgsl_ops);
+	if ((rc = tty_register_driver(serial_driver)) < 0) {
+		printk("%s(%d):Couldn't register serial driver\n",
+			__FILE__,__LINE__);
+		put_tty_driver(serial_driver);
+		serial_driver = NULL;
+		return rc;
+	}
+			
+ 	printk("%s %s, tty major#%d\n",
+		driver_name, driver_version,
+		serial_driver->major);
+	return 0;
+}
+
+/* enumerate user specified ISA adapters
+ */
+static void mgsl_enum_isa_devices(void)
+{
+	struct mgsl_struct *info;
+	int i;
+		
+	/* Check for user specified ISA devices */
+	
+	for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){
+		if ( debug_level >= DEBUG_LEVEL_INFO )
+			printk("ISA device specified io=%04X,irq=%d,dma=%d\n",
+				io[i], irq[i], dma[i] );
+		
+		info = mgsl_allocate_device();
+		if ( !info ) {
+			/* error allocating device instance data */
+			if ( debug_level >= DEBUG_LEVEL_ERROR )
+				printk( "can't allocate device instance data.\n");
+			continue;
+		}
+		
+		/* Copy user configuration info to device instance data */
+		info->io_base = (unsigned int)io[i];
+		info->irq_level = (unsigned int)irq[i];
+		info->irq_level = irq_canonicalize(info->irq_level);
+		info->dma_level = (unsigned int)dma[i];
+		info->bus_type = MGSL_BUS_TYPE_ISA;
+		info->io_addr_size = 16;
+		info->irq_flags = 0;
+		
+		mgsl_add_device( info );
+	}
+}
+
+static void synclink_cleanup(void)
+{
+	int rc;
+	struct mgsl_struct *info;
+	struct mgsl_struct *tmp;
+
+	printk("Unloading %s: %s\n", driver_name, driver_version);
+
+	if (serial_driver) {
+		if ((rc = tty_unregister_driver(serial_driver)))
+			printk("%s(%d) failed to unregister tty driver err=%d\n",
+			       __FILE__,__LINE__,rc);
+		put_tty_driver(serial_driver);
+	}
+
+	info = mgsl_device_list;
+	while(info) {
+#if SYNCLINK_GENERIC_HDLC
+		hdlcdev_exit(info);
+#endif
+		mgsl_release_resources(info);
+		tmp = info;
+		info = info->next_device;
+		kfree(tmp);
+	}
+	
+	if (pci_registered)
+		pci_unregister_driver(&synclink_pci_driver);
+}
+
+static int __init synclink_init(void)
+{
+	int rc;
+
+	if (break_on_load) {
+	 	mgsl_get_text_ptr();
+  		BREAKPOINT();
+	}
+
+ 	printk("%s %s\n", driver_name, driver_version);
+
+	mgsl_enum_isa_devices();
+	if ((rc = pci_register_driver(&synclink_pci_driver)) < 0)
+		printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
+	else
+		pci_registered = true;
+
+	if ((rc = mgsl_init_tty()) < 0)
+		goto error;
+
+	return 0;
+
+error:
+	synclink_cleanup();
+	return rc;
+}
+
+static void __exit synclink_exit(void)
+{
+	synclink_cleanup();
+}
+
+module_init(synclink_init);
+module_exit(synclink_exit);
+
+/*
+ * usc_RTCmd()
+ *
+ * Issue a USC Receive/Transmit command to the
+ * Channel Command/Address Register (CCAR).
+ *
+ * Notes:
+ *
+ *    The command is encoded in the most significant 5 bits <15..11>
+ *    of the CCAR value. Bits <10..7> of the CCAR must be preserved
+ *    and Bits <6..0> must be written as zeros.
+ *
+ * Arguments:
+ *
+ *    info   pointer to device information structure
+ *    Cmd    command mask (use symbolic macros)
+ *
+ * Return Value:
+ *
+ *    None
+ */
+static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd )
+{
+	/* output command to CCAR in bits <15..11> */
+	/* preserve bits <10..7>, bits <6..0> must be zero */
+
+	outw( Cmd + info->loopback_bits, info->io_base + CCAR );
+
+	/* Read to flush write to CCAR */
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+		inw( info->io_base + CCAR );
+
+}	/* end of usc_RTCmd() */
+
+/*
+ * usc_DmaCmd()
+ *
+ *    Issue a DMA command to the DMA Command/Address Register (DCAR).
+ *
+ * Arguments:
+ *
+ *    info   pointer to device information structure
+ *    Cmd    DMA command mask (usc_DmaCmd_XX Macros)
+ *
+ * Return Value:
+ *
+ *       None
+ */
+static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd )
+{
+	/* write command mask to DCAR */
+	outw( Cmd + info->mbre_bit, info->io_base );
+
+	/* Read to flush write to DCAR */
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+		inw( info->io_base );
+
+}	/* end of usc_DmaCmd() */
+
+/*
+ * usc_OutDmaReg()
+ *
+ *    Write a 16-bit value to a USC DMA register
+ *
+ * Arguments:
+ *
+ *    info      pointer to device info structure
+ *    RegAddr   register address (number) for write
+ *    RegValue  16-bit value to write to register
+ *
+ * Return Value:
+ *
+ *    None
+ *
+ */
+static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
+{
+	/* Note: The DCAR is located at the adapter base address */
+	/* Note: must preserve state of BIT8 in DCAR */
+
+	outw( RegAddr + info->mbre_bit, info->io_base );
+	outw( RegValue, info->io_base );
+
+	/* Read to flush write to DCAR */
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+		inw( info->io_base );
+
+}	/* end of usc_OutDmaReg() */
+ 
+/*
+ * usc_InDmaReg()
+ *
+ *    Read a 16-bit value from a DMA register
+ *
+ * Arguments:
+ *
+ *    info     pointer to device info structure
+ *    RegAddr  register address (number) to read from
+ *
+ * Return Value:
+ *
+ *    The 16-bit value read from register
+ *
+ */
+static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr )
+{
+	/* Note: The DCAR is located at the adapter base address */
+	/* Note: must preserve state of BIT8 in DCAR */
+
+	outw( RegAddr + info->mbre_bit, info->io_base );
+	return inw( info->io_base );
+
+}	/* end of usc_InDmaReg() */
+
+/*
+ *
+ * usc_OutReg()
+ *
+ *    Write a 16-bit value to a USC serial channel register 
+ *
+ * Arguments:
+ *
+ *    info      pointer to device info structure
+ *    RegAddr   register address (number) to write to
+ *    RegValue  16-bit value to write to register
+ *
+ * Return Value:
+ *
+ *    None
+ *
+ */
+static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
+{
+	outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
+	outw( RegValue, info->io_base + CCAR );
+
+	/* Read to flush write to CCAR */
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+		inw( info->io_base + CCAR );
+
+}	/* end of usc_OutReg() */
+
+/*
+ * usc_InReg()
+ *
+ *    Reads a 16-bit value from a USC serial channel register
+ *
+ * Arguments:
+ *
+ *    info       pointer to device extension
+ *    RegAddr    register address (number) to read from
+ *
+ * Return Value:
+ *
+ *    16-bit value read from register
+ */
+static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr )
+{
+	outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
+	return inw( info->io_base + CCAR );
+
+}	/* end of usc_InReg() */
+
+/* usc_set_sdlc_mode()
+ *
+ *    Set up the adapter for SDLC DMA communications.
+ *
+ * Arguments:		info    pointer to device instance data
+ * Return Value: 	NONE
+ */
+static void usc_set_sdlc_mode( struct mgsl_struct *info )
+{
+	u16 RegValue;
+	bool PreSL1660;
+	
+	/*
+	 * determine if the IUSC on the adapter is pre-SL1660. If
+	 * not, take advantage of the UnderWait feature of more
+	 * modern chips. If an underrun occurs and this bit is set,
+	 * the transmitter will idle the programmed idle pattern
+	 * until the driver has time to service the underrun. Otherwise,
+	 * the dma controller may get the cycles previously requested
+	 * and begin transmitting queued tx data.
+	 */
+	usc_OutReg(info,TMCR,0x1f);
+	RegValue=usc_InReg(info,TMDR);
+	PreSL1660 = (RegValue == IUSC_PRE_SL1660);
+
+ 	if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+ 	{
+ 	   /*
+ 	   ** Channel Mode Register (CMR)
+ 	   **
+ 	   ** <15..14>    10    Tx Sub Modes, Send Flag on Underrun
+ 	   ** <13>        0     0 = Transmit Disabled (initially)
+ 	   ** <12>        0     1 = Consecutive Idles share common 0
+ 	   ** <11..8>     1110  Transmitter Mode = HDLC/SDLC Loop
+ 	   ** <7..4>      0000  Rx Sub Modes, addr/ctrl field handling
+ 	   ** <3..0>      0110  Receiver Mode = HDLC/SDLC
+ 	   **
+ 	   ** 1000 1110 0000 0110 = 0x8e06
+ 	   */
+ 	   RegValue = 0x8e06;
+ 
+ 	   /*--------------------------------------------------
+ 	    * ignore user options for UnderRun Actions and
+ 	    * preambles
+ 	    *--------------------------------------------------*/
+ 	}
+ 	else
+ 	{	
+		/* Channel mode Register (CMR)
+		 *
+		 * <15..14>  00    Tx Sub modes, Underrun Action
+		 * <13>      0     1 = Send Preamble before opening flag
+		 * <12>      0     1 = Consecutive Idles share common 0
+		 * <11..8>   0110  Transmitter mode = HDLC/SDLC
+		 * <7..4>    0000  Rx Sub modes, addr/ctrl field handling
+		 * <3..0>    0110  Receiver mode = HDLC/SDLC
+		 *
+		 * 0000 0110 0000 0110 = 0x0606
+		 */
+		if (info->params.mode == MGSL_MODE_RAW) {
+			RegValue = 0x0001;		/* Set Receive mode = external sync */
+
+			usc_OutReg( info, IOCR,		/* Set IOCR DCD is RxSync Detect Input */
+				(unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12));
+
+			/*
+			 * TxSubMode:
+			 * 	CMR <15>		0	Don't send CRC on Tx Underrun
+			 * 	CMR <14>		x	undefined
+			 * 	CMR <13>		0	Send preamble before openning sync
+			 * 	CMR <12>		0	Send 8-bit syncs, 1=send Syncs per TxLength
+			 *
+			 * TxMode:
+			 * 	CMR <11-8)	0100	MonoSync
+			 *
+			 * 	0x00 0100 xxxx xxxx  04xx
+			 */
+			RegValue |= 0x0400;
+		}
+		else {
+
+		RegValue = 0x0606;
+
+		if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 )
+			RegValue |= BIT14;
+		else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG )
+			RegValue |= BIT15;
+		else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC )
+			RegValue |= BIT15 + BIT14;
+		}
+
+		if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE )
+			RegValue |= BIT13;
+	}
+
+	if ( info->params.mode == MGSL_MODE_HDLC &&
+		(info->params.flags & HDLC_FLAG_SHARE_ZERO) )
+		RegValue |= BIT12;
+
+	if ( info->params.addr_filter != 0xff )
+	{
+		/* set up receive address filtering */
+		usc_OutReg( info, RSR, info->params.addr_filter );
+		RegValue |= BIT4;
+	}
+
+	usc_OutReg( info, CMR, RegValue );
+	info->cmr_value = RegValue;
+
+	/* Receiver mode Register (RMR)
+	 *
+	 * <15..13>  000    encoding
+	 * <12..11>  00     FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
+	 * <10>      1      1 = Set CRC to all 1s (use for SDLC/HDLC)
+	 * <9>       0      1 = Include Receive chars in CRC
+	 * <8>       1      1 = Use Abort/PE bit as abort indicator
+	 * <7..6>    00     Even parity
+	 * <5>       0      parity disabled
+	 * <4..2>    000    Receive Char Length = 8 bits
+	 * <1..0>    00     Disable Receiver
+	 *
+	 * 0000 0101 0000 0000 = 0x0500
+	 */
+
+	RegValue = 0x0500;
+
+	switch ( info->params.encoding ) {
+	case HDLC_ENCODING_NRZB:               RegValue |= BIT13; break;
+	case HDLC_ENCODING_NRZI_MARK:          RegValue |= BIT14; break;
+	case HDLC_ENCODING_NRZI_SPACE:	       RegValue |= BIT14 + BIT13; break;
+	case HDLC_ENCODING_BIPHASE_MARK:       RegValue |= BIT15; break;
+	case HDLC_ENCODING_BIPHASE_SPACE:      RegValue |= BIT15 + BIT13; break;
+	case HDLC_ENCODING_BIPHASE_LEVEL:      RegValue |= BIT15 + BIT14; break;
+	case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
+	}
+
+	if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
+		RegValue |= BIT9;
+	else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
+		RegValue |= ( BIT12 | BIT10 | BIT9 );
+
+	usc_OutReg( info, RMR, RegValue );
+
+	/* Set the Receive count Limit Register (RCLR) to 0xffff. */
+	/* When an opening flag of an SDLC frame is recognized the */
+	/* Receive Character count (RCC) is loaded with the value in */
+	/* RCLR. The RCC is decremented for each received byte.  The */
+	/* value of RCC is stored after the closing flag of the frame */
+	/* allowing the frame size to be computed. */
+
+	usc_OutReg( info, RCLR, RCLRVALUE );
+
+	usc_RCmd( info, RCmd_SelectRicrdma_level );
+
+	/* Receive Interrupt Control Register (RICR)
+	 *
+	 * <15..8>	?	RxFIFO DMA Request Level
+	 * <7>		0	Exited Hunt IA (Interrupt Arm)
+	 * <6>		0	Idle Received IA
+	 * <5>		0	Break/Abort IA
+	 * <4>		0	Rx Bound IA
+	 * <3>		1	Queued status reflects oldest 2 bytes in FIFO
+	 * <2>		0	Abort/PE IA
+	 * <1>		1	Rx Overrun IA
+	 * <0>		0	Select TC0 value for readback
+	 *
+	 *	0000 0000 0000 1000 = 0x000a
+	 */
+
+	/* Carry over the Exit Hunt and Idle Received bits */
+	/* in case they have been armed by usc_ArmEvents.   */
+
+	RegValue = usc_InReg( info, RICR ) & 0xc0;
+
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+		usc_OutReg( info, RICR, (u16)(0x030a | RegValue) );
+	else
+		usc_OutReg( info, RICR, (u16)(0x140a | RegValue) );
+
+	/* Unlatch all Rx status bits and clear Rx status IRQ Pending */
+
+	usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
+	usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
+
+	/* Transmit mode Register (TMR)
+	 *	
+	 * <15..13>	000	encoding
+	 * <12..11>	00	FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
+	 * <10>		1	1 = Start CRC as all 1s (use for SDLC/HDLC)
+	 * <9>		0	1 = Tx CRC Enabled
+	 * <8>		0	1 = Append CRC to end of transmit frame
+	 * <7..6>	00	Transmit parity Even
+	 * <5>		0	Transmit parity Disabled
+	 * <4..2>	000	Tx Char Length = 8 bits
+	 * <1..0>	00	Disable Transmitter
+	 *
+	 * 	0000 0100 0000 0000 = 0x0400
+	 */
+
+	RegValue = 0x0400;
+
+	switch ( info->params.encoding ) {
+	case HDLC_ENCODING_NRZB:               RegValue |= BIT13; break;
+	case HDLC_ENCODING_NRZI_MARK:          RegValue |= BIT14; break;
+	case HDLC_ENCODING_NRZI_SPACE:         RegValue |= BIT14 + BIT13; break;
+	case HDLC_ENCODING_BIPHASE_MARK:       RegValue |= BIT15; break;
+	case HDLC_ENCODING_BIPHASE_SPACE:      RegValue |= BIT15 + BIT13; break;
+	case HDLC_ENCODING_BIPHASE_LEVEL:      RegValue |= BIT15 + BIT14; break;
+	case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
+	}
+
+	if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
+		RegValue |= BIT9 + BIT8;
+	else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
+		RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8);
+
+	usc_OutReg( info, TMR, RegValue );
+
+	usc_set_txidle( info );
+
+
+	usc_TCmd( info, TCmd_SelectTicrdma_level );
+
+	/* Transmit Interrupt Control Register (TICR)
+	 *
+	 * <15..8>	?	Transmit FIFO DMA Level
+	 * <7>		0	Present IA (Interrupt Arm)
+	 * <6>		0	Idle Sent IA
+	 * <5>		1	Abort Sent IA
+	 * <4>		1	EOF/EOM Sent IA
+	 * <3>		0	CRC Sent IA
+	 * <2>		1	1 = Wait for SW Trigger to Start Frame
+	 * <1>		1	Tx Underrun IA
+	 * <0>		0	TC0 constant on read back
+	 *
+	 *	0000 0000 0011 0110 = 0x0036
+	 */
+
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+		usc_OutReg( info, TICR, 0x0736 );
+	else								
+		usc_OutReg( info, TICR, 0x1436 );
+
+	usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
+	usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
+
+	/*
+	** Transmit Command/Status Register (TCSR)
+	**
+	** <15..12>	0000	TCmd
+	** <11> 	0/1	UnderWait
+	** <10..08>	000	TxIdle
+	** <7>		x	PreSent
+	** <6>         	x	IdleSent
+	** <5>         	x	AbortSent
+	** <4>         	x	EOF/EOM Sent
+	** <3>         	x	CRC Sent
+	** <2>         	x	All Sent
+	** <1>         	x	TxUnder
+	** <0>         	x	TxEmpty
+	** 
+	** 0000 0000 0000 0000 = 0x0000
+	*/
+	info->tcsr_value = 0;
+
+	if ( !PreSL1660 )
+		info->tcsr_value |= TCSR_UNDERWAIT;
+		
+	usc_OutReg( info, TCSR, info->tcsr_value );
+
+	/* Clock mode Control Register (CMCR)
+	 *
+	 * <15..14>	00	counter 1 Source = Disabled
+	 * <13..12> 	00	counter 0 Source = Disabled
+	 * <11..10> 	11	BRG1 Input is TxC Pin
+	 * <9..8>	11	BRG0 Input is TxC Pin
+	 * <7..6>	01	DPLL Input is BRG1 Output
+	 * <5..3>	XXX	TxCLK comes from Port 0
+	 * <2..0>   	XXX	RxCLK comes from Port 1
+	 *
+	 *	0000 1111 0111 0111 = 0x0f77
+	 */
+
+	RegValue = 0x0f40;
+
+	if ( info->params.flags & HDLC_FLAG_RXC_DPLL )
+		RegValue |= 0x0003;	/* RxCLK from DPLL */
+	else if ( info->params.flags & HDLC_FLAG_RXC_BRG )
+		RegValue |= 0x0004;	/* RxCLK from BRG0 */
+ 	else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN)
+ 		RegValue |= 0x0006;	/* RxCLK from TXC Input */
+	else
+		RegValue |= 0x0007;	/* RxCLK from Port1 */
+
+	if ( info->params.flags & HDLC_FLAG_TXC_DPLL )
+		RegValue |= 0x0018;	/* TxCLK from DPLL */
+	else if ( info->params.flags & HDLC_FLAG_TXC_BRG )
+		RegValue |= 0x0020;	/* TxCLK from BRG0 */
+ 	else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN)
+ 		RegValue |= 0x0038;	/* RxCLK from TXC Input */
+	else
+		RegValue |= 0x0030;	/* TxCLK from Port0 */
+
+	usc_OutReg( info, CMCR, RegValue );
+
+
+	/* Hardware Configuration Register (HCR)
+	 *
+	 * <15..14>	00	CTR0 Divisor:00=32,01=16,10=8,11=4
+	 * <13>		0	CTR1DSel:0=CTR0Div determines CTR0Div
+	 * <12>		0	CVOK:0=report code violation in biphase
+	 * <11..10>	00	DPLL Divisor:00=32,01=16,10=8,11=4
+	 * <9..8>	XX	DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level
+	 * <7..6>	00	reserved
+	 * <5>		0	BRG1 mode:0=continuous,1=single cycle
+	 * <4>		X	BRG1 Enable
+	 * <3..2>	00	reserved
+	 * <1>		0	BRG0 mode:0=continuous,1=single cycle
+	 * <0>		0	BRG0 Enable
+	 */
+
+	RegValue = 0x0000;
+
+	if ( info->params.flags & (HDLC_FLAG_RXC_DPLL + HDLC_FLAG_TXC_DPLL) ) {
+		u32 XtalSpeed;
+		u32 DpllDivisor;
+		u16 Tc;
+
+		/*  DPLL is enabled. Use BRG1 to provide continuous reference clock  */
+		/*  for DPLL. DPLL mode in HCR is dependent on the encoding used. */
+
+		if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+			XtalSpeed = 11059200;
+		else
+			XtalSpeed = 14745600;
+
+		if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
+			DpllDivisor = 16;
+			RegValue |= BIT10;
+		}
+		else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
+			DpllDivisor = 8;
+			RegValue |= BIT11;
+		}
+		else
+			DpllDivisor = 32;
+
+		/*  Tc = (Xtal/Speed) - 1 */
+		/*  If twice the remainder of (Xtal/Speed) is greater than Speed */
+		/*  then rounding up gives a more precise time constant. Instead */
+		/*  of rounding up and then subtracting 1 we just don't subtract */
+		/*  the one in this case. */
+
+ 		/*--------------------------------------------------
+ 		 * ejz: for DPLL mode, application should use the
+ 		 * same clock speed as the partner system, even 
+ 		 * though clocking is derived from the input RxData.
+ 		 * In case the user uses a 0 for the clock speed,
+ 		 * default to 0xffffffff and don't try to divide by
+ 		 * zero
+ 		 *--------------------------------------------------*/
+ 		if ( info->params.clock_speed )
+ 		{
+			Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
+			if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
+			       / info->params.clock_speed) )
+				Tc--;
+ 		}
+ 		else
+ 			Tc = -1;
+ 				  
+
+		/* Write 16-bit Time Constant for BRG1 */
+		usc_OutReg( info, TC1R, Tc );
+
+		RegValue |= BIT4;		/* enable BRG1 */
+
+		switch ( info->params.encoding ) {
+		case HDLC_ENCODING_NRZ:
+		case HDLC_ENCODING_NRZB:
+		case HDLC_ENCODING_NRZI_MARK:
+		case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break;
+		case HDLC_ENCODING_BIPHASE_MARK:
+		case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break;
+		case HDLC_ENCODING_BIPHASE_LEVEL:
+		case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 + BIT8; break;
+		}
+	}
+
+	usc_OutReg( info, HCR, RegValue );
+
+
+	/* Channel Control/status Register (CCSR)
+	 *
+	 * <15>		X	RCC FIFO Overflow status (RO)
+	 * <14>		X	RCC FIFO Not Empty status (RO)
+	 * <13>		0	1 = Clear RCC FIFO (WO)
+	 * <12>		X	DPLL Sync (RW)
+	 * <11>		X	DPLL 2 Missed Clocks status (RO)
+	 * <10>		X	DPLL 1 Missed Clock status (RO)
+	 * <9..8>	00	DPLL Resync on rising and falling edges (RW)
+	 * <7>		X	SDLC Loop On status (RO)
+	 * <6>		X	SDLC Loop Send status (RO)
+	 * <5>		1	Bypass counters for TxClk and RxClk (RW)
+	 * <4..2>   	000	Last Char of SDLC frame has 8 bits (RW)
+	 * <1..0>   	00	reserved
+	 *
+	 *	0000 0000 0010 0000 = 0x0020
+	 */
+
+	usc_OutReg( info, CCSR, 0x1020 );
+
+
+	if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) {
+		usc_OutReg( info, SICR,
+			    (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) );
+	}
+	
+
+	/* enable Master Interrupt Enable bit (MIE) */
+	usc_EnableMasterIrqBit( info );
+
+	usc_ClearIrqPendingBits( info, RECEIVE_STATUS + RECEIVE_DATA +
+				TRANSMIT_STATUS + TRANSMIT_DATA + MISC);
+
+	/* arm RCC underflow interrupt */
+	usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3));
+	usc_EnableInterrupts(info, MISC);
+
+	info->mbre_bit = 0;
+	outw( 0, info->io_base ); 			/* clear Master Bus Enable (DCAR) */
+	usc_DmaCmd( info, DmaCmd_ResetAllChannels );	/* disable both DMA channels */
+	info->mbre_bit = BIT8;
+	outw( BIT8, info->io_base );			/* set Master Bus Enable (DCAR) */
+
+	if (info->bus_type == MGSL_BUS_TYPE_ISA) {
+		/* Enable DMAEN (Port 7, Bit 14) */
+		/* This connects the DMA request signal to the ISA bus */
+		usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14));
+	}
+
+	/* DMA Control Register (DCR)
+	 *
+	 * <15..14>	10	Priority mode = Alternating Tx/Rx
+	 *		01	Rx has priority
+	 *		00	Tx has priority
+	 *
+	 * <13>		1	Enable Priority Preempt per DCR<15..14>
+	 *			(WARNING DCR<11..10> must be 00 when this is 1)
+	 *		0	Choose activate channel per DCR<11..10>
+	 *
+	 * <12>		0	Little Endian for Array/List
+	 * <11..10>	00	Both Channels can use each bus grant
+	 * <9..6>	0000	reserved
+	 * <5>		0	7 CLK - Minimum Bus Re-request Interval
+	 * <4>		0	1 = drive D/C and S/D pins
+	 * <3>		1	1 = Add one wait state to all DMA cycles.
+	 * <2>		0	1 = Strobe /UAS on every transfer.
+	 * <1..0>	11	Addr incrementing only affects LS24 bits
+	 *
+	 *	0110 0000 0000 1011 = 0x600b
+	 */
+
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+		/* PCI adapter does not need DMA wait state */
+		usc_OutDmaReg( info, DCR, 0xa00b );
+	}
+	else
+		usc_OutDmaReg( info, DCR, 0x800b );
+
+
+	/* Receive DMA mode Register (RDMR)
+	 *
+	 * <15..14>	11	DMA mode = Linked List Buffer mode
+	 * <13>		1	RSBinA/L = store Rx status Block in Arrary/List entry
+	 * <12>		1	Clear count of List Entry after fetching
+	 * <11..10>	00	Address mode = Increment
+	 * <9>		1	Terminate Buffer on RxBound
+	 * <8>		0	Bus Width = 16bits
+	 * <7..0>	?	status Bits (write as 0s)
+	 *
+	 * 1111 0010 0000 0000 = 0xf200
+	 */
+
+	usc_OutDmaReg( info, RDMR, 0xf200 );
+
+
+	/* Transmit DMA mode Register (TDMR)
+	 *
+	 * <15..14>	11	DMA mode = Linked List Buffer mode
+	 * <13>		1	TCBinA/L = fetch Tx Control Block from List entry
+	 * <12>		1	Clear count of List Entry after fetching
+	 * <11..10>	00	Address mode = Increment
+	 * <9>		1	Terminate Buffer on end of frame
+	 * <8>		0	Bus Width = 16bits
+	 * <7..0>	?	status Bits (Read Only so write as 0)
+	 *
+	 *	1111 0010 0000 0000 = 0xf200
+	 */
+
+	usc_OutDmaReg( info, TDMR, 0xf200 );
+
+
+	/* DMA Interrupt Control Register (DICR)
+	 *
+	 * <15>		1	DMA Interrupt Enable
+	 * <14>		0	1 = Disable IEO from USC
+	 * <13>		0	1 = Don't provide vector during IntAck
+	 * <12>		1	1 = Include status in Vector
+	 * <10..2>	0	reserved, Must be 0s
+	 * <1>		0	1 = Rx DMA Interrupt Enabled
+	 * <0>		0	1 = Tx DMA Interrupt Enabled
+	 *
+	 *	1001 0000 0000 0000 = 0x9000
+	 */
+
+	usc_OutDmaReg( info, DICR, 0x9000 );
+
+	usc_InDmaReg( info, RDMR );		/* clear pending receive DMA IRQ bits */
+	usc_InDmaReg( info, TDMR );		/* clear pending transmit DMA IRQ bits */
+	usc_OutDmaReg( info, CDIR, 0x0303 );	/* clear IUS and Pending for Tx and Rx */
+
+	/* Channel Control Register (CCR)
+	 *
+	 * <15..14>	10	Use 32-bit Tx Control Blocks (TCBs)
+	 * <13>		0	Trigger Tx on SW Command Disabled
+	 * <12>		0	Flag Preamble Disabled
+	 * <11..10>	00	Preamble Length
+	 * <9..8>	00	Preamble Pattern
+	 * <7..6>	10	Use 32-bit Rx status Blocks (RSBs)
+	 * <5>		0	Trigger Rx on SW Command Disabled
+	 * <4..0>	0	reserved
+	 *
+	 *	1000 0000 1000 0000 = 0x8080
+	 */
+
+	RegValue = 0x8080;
+
+	switch ( info->params.preamble_length ) {
+	case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break;
+	case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break;
+	case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 + BIT10; break;
+	}
+
+	switch ( info->params.preamble ) {
+	case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 + BIT12; break;
+	case HDLC_PREAMBLE_PATTERN_ONES:  RegValue |= BIT8; break;
+	case HDLC_PREAMBLE_PATTERN_10:    RegValue |= BIT9; break;
+	case HDLC_PREAMBLE_PATTERN_01:    RegValue |= BIT9 + BIT8; break;
+	}
+
+	usc_OutReg( info, CCR, RegValue );
+
+
+	/*
+	 * Burst/Dwell Control Register
+	 *
+	 * <15..8>	0x20	Maximum number of transfers per bus grant
+	 * <7..0>	0x00	Maximum number of clock cycles per bus grant
+	 */
+
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+		/* don't limit bus occupancy on PCI adapter */
+		usc_OutDmaReg( info, BDCR, 0x0000 );
+	}
+	else
+		usc_OutDmaReg( info, BDCR, 0x2000 );
+
+	usc_stop_transmitter(info);
+	usc_stop_receiver(info);
+	
+}	/* end of usc_set_sdlc_mode() */
+
+/* usc_enable_loopback()
+ *
+ * Set the 16C32 for internal loopback mode.
+ * The TxCLK and RxCLK signals are generated from the BRG0 and
+ * the TxD is looped back to the RxD internally.
+ *
+ * Arguments:		info	pointer to device instance data
+ *			enable	1 = enable loopback, 0 = disable
+ * Return Value:	None
+ */
+static void usc_enable_loopback(struct mgsl_struct *info, int enable)
+{
+	if (enable) {
+		/* blank external TXD output */
+		usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7+BIT6));
+	
+		/* Clock mode Control Register (CMCR)
+		 *
+		 * <15..14>	00	counter 1 Disabled
+		 * <13..12> 	00	counter 0 Disabled
+		 * <11..10> 	11	BRG1 Input is TxC Pin
+		 * <9..8>	11	BRG0 Input is TxC Pin
+		 * <7..6>	01	DPLL Input is BRG1 Output
+		 * <5..3>	100	TxCLK comes from BRG0
+		 * <2..0>   	100	RxCLK comes from BRG0
+		 *
+		 * 0000 1111 0110 0100 = 0x0f64
+		 */
+
+		usc_OutReg( info, CMCR, 0x0f64 );
+
+		/* Write 16-bit Time Constant for BRG0 */
+		/* use clock speed if available, otherwise use 8 for diagnostics */
+		if (info->params.clock_speed) {
+			if (info->bus_type == MGSL_BUS_TYPE_PCI)
+				usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1));
+			else
+				usc_OutReg(info, TC0R, (u16)((14745600/info->params.clock_speed)-1));
+		} else
+			usc_OutReg(info, TC0R, (u16)8);
+
+		/* Hardware Configuration Register (HCR) Clear Bit 1, BRG0
+		   mode = Continuous Set Bit 0 to enable BRG0.  */
+		usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
+
+		/* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
+		usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004));
+
+		/* set Internal Data loopback mode */
+		info->loopback_bits = 0x300;
+		outw( 0x0300, info->io_base + CCAR );
+	} else {
+		/* enable external TXD output */
+		usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7+BIT6));
+	
+		/* clear Internal Data loopback mode */
+		info->loopback_bits = 0;
+		outw( 0,info->io_base + CCAR );
+	}
+	
+}	/* end of usc_enable_loopback() */
+
+/* usc_enable_aux_clock()
+ *
+ * Enabled the AUX clock output at the specified frequency.
+ *
+ * Arguments:
+ *
+ *	info		pointer to device extension
+ *	data_rate	data rate of clock in bits per second
+ *			A data rate of 0 disables the AUX clock.
+ *
+ * Return Value:	None
+ */
+static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate )
+{
+	u32 XtalSpeed;
+	u16 Tc;
+
+	if ( data_rate ) {
+		if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+			XtalSpeed = 11059200;
+		else
+			XtalSpeed = 14745600;
+
+
+		/* Tc = (Xtal/Speed) - 1 */
+		/* If twice the remainder of (Xtal/Speed) is greater than Speed */
+		/* then rounding up gives a more precise time constant. Instead */
+		/* of rounding up and then subtracting 1 we just don't subtract */
+		/* the one in this case. */
+
+
+		Tc = (u16)(XtalSpeed/data_rate);
+		if ( !(((XtalSpeed % data_rate) * 2) / data_rate) )
+			Tc--;
+
+		/* Write 16-bit Time Constant for BRG0 */
+		usc_OutReg( info, TC0R, Tc );
+
+		/*
+		 * Hardware Configuration Register (HCR)
+		 * Clear Bit 1, BRG0 mode = Continuous
+		 * Set Bit 0 to enable BRG0.
+		 */
+
+		usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
+
+		/* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
+		usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
+	} else {
+		/* data rate == 0 so turn off BRG0 */
+		usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
+	}
+
+}	/* end of usc_enable_aux_clock() */
+
+/*
+ *
+ * usc_process_rxoverrun_sync()
+ *
+ *		This function processes a receive overrun by resetting the
+ *		receive DMA buffers and issuing a Purge Rx FIFO command
+ *		to allow the receiver to continue receiving.
+ *
+ * Arguments:
+ *
+ *	info		pointer to device extension
+ *
+ * Return Value: None
+ */
+static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
+{
+	int start_index;
+	int end_index;
+	int frame_start_index;
+	bool start_of_frame_found = false;
+	bool end_of_frame_found = false;
+	bool reprogram_dma = false;
+
+	DMABUFFERENTRY *buffer_list = info->rx_buffer_list;
+	u32 phys_addr;
+
+	usc_DmaCmd( info, DmaCmd_PauseRxChannel );
+	usc_RCmd( info, RCmd_EnterHuntmode );
+	usc_RTCmd( info, RTCmd_PurgeRxFifo );
+
+	/* CurrentRxBuffer points to the 1st buffer of the next */
+	/* possibly available receive frame. */
+	
+	frame_start_index = start_index = end_index = info->current_rx_buffer;
+
+	/* Search for an unfinished string of buffers. This means */
+	/* that a receive frame started (at least one buffer with */
+	/* count set to zero) but there is no terminiting buffer */
+	/* (status set to non-zero). */
+
+	while( !buffer_list[end_index].count )
+	{
+		/* Count field has been reset to zero by 16C32. */
+		/* This buffer is currently in use. */
+
+		if ( !start_of_frame_found )
+		{
+			start_of_frame_found = true;
+			frame_start_index = end_index;
+			end_of_frame_found = false;
+		}
+
+		if ( buffer_list[end_index].status )
+		{
+			/* Status field has been set by 16C32. */
+			/* This is the last buffer of a received frame. */
+
+			/* We want to leave the buffers for this frame intact. */
+			/* Move on to next possible frame. */
+
+			start_of_frame_found = false;
+			end_of_frame_found = true;
+		}
+
+  		/* advance to next buffer entry in linked list */
+  		end_index++;
+  		if ( end_index == info->rx_buffer_count )
+  			end_index = 0;
+
+		if ( start_index == end_index )
+		{
+			/* The entire list has been searched with all Counts == 0 and */
+			/* all Status == 0. The receive buffers are */
+			/* completely screwed, reset all receive buffers! */
+			mgsl_reset_rx_dma_buffers( info );
+			frame_start_index = 0;
+			start_of_frame_found = false;
+			reprogram_dma = true;
+			break;
+		}
+	}
+
+	if ( start_of_frame_found && !end_of_frame_found )
+	{
+		/* There is an unfinished string of receive DMA buffers */
+		/* as a result of the receiver overrun. */
+
+		/* Reset the buffers for the unfinished frame */
+		/* and reprogram the receive DMA controller to start */
+		/* at the 1st buffer of unfinished frame. */
+
+		start_index = frame_start_index;
+
+		do
+		{
+			*((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE;
+
+  			/* Adjust index for wrap around. */
+  			if ( start_index == info->rx_buffer_count )
+  				start_index = 0;
+
+		} while( start_index != end_index );
+
+		reprogram_dma = true;
+	}
+
+	if ( reprogram_dma )
+	{
+		usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
+		usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS);
+		usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS);
+		
+		usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
+		
+		/* This empties the receive FIFO and loads the RCC with RCLR */
+		usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
+
+		/* program 16C32 with physical address of 1st DMA buffer entry */
+		phys_addr = info->rx_buffer_list[frame_start_index].phys_entry;
+		usc_OutDmaReg( info, NRARL, (u16)phys_addr );
+		usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
+
+		usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
+		usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
+		usc_EnableInterrupts( info, RECEIVE_STATUS );
+
+		/* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
+		/* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
+
+		usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
+		usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
+		usc_DmaCmd( info, DmaCmd_InitRxChannel );
+		if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
+			usc_EnableReceiver(info,ENABLE_AUTO_DCD);
+		else
+			usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
+	}
+	else
+	{
+		/* This empties the receive FIFO and loads the RCC with RCLR */
+		usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
+		usc_RTCmd( info, RTCmd_PurgeRxFifo );
+	}
+
+}	/* end of usc_process_rxoverrun_sync() */
+
+/* usc_stop_receiver()
+ *
+ *	Disable USC receiver
+ *
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void usc_stop_receiver( struct mgsl_struct *info )
+{
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):usc_stop_receiver(%s)\n",
+			 __FILE__,__LINE__, info->device_name );
+			 
+	/* Disable receive DMA channel. */
+	/* This also disables receive DMA channel interrupts */
+	usc_DmaCmd( info, DmaCmd_ResetRxChannel );
+
+	usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
+	usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
+	usc_DisableInterrupts( info, RECEIVE_DATA + RECEIVE_STATUS );
+
+	usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
+
+	/* This empties the receive FIFO and loads the RCC with RCLR */
+	usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
+	usc_RTCmd( info, RTCmd_PurgeRxFifo );
+
+	info->rx_enabled = false;
+	info->rx_overflow = false;
+	info->rx_rcc_underrun = false;
+	
+}	/* end of stop_receiver() */
+
+/* usc_start_receiver()
+ *
+ *	Enable the USC receiver 
+ *
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void usc_start_receiver( struct mgsl_struct *info )
+{
+	u32 phys_addr;
+	
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):usc_start_receiver(%s)\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	mgsl_reset_rx_dma_buffers( info );
+	usc_stop_receiver( info );
+
+	usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
+	usc_RTCmd( info, RTCmd_PurgeRxFifo );
+
+	if ( info->params.mode == MGSL_MODE_HDLC ||
+		info->params.mode == MGSL_MODE_RAW ) {
+		/* DMA mode Transfers */
+		/* Program the DMA controller. */
+		/* Enable the DMA controller end of buffer interrupt. */
+
+		/* program 16C32 with physical address of 1st DMA buffer entry */
+		phys_addr = info->rx_buffer_list[0].phys_entry;
+		usc_OutDmaReg( info, NRARL, (u16)phys_addr );
+		usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
+
+		usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
+		usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
+		usc_EnableInterrupts( info, RECEIVE_STATUS );
+
+		/* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
+		/* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
+
+		usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
+		usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
+		usc_DmaCmd( info, DmaCmd_InitRxChannel );
+		if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
+			usc_EnableReceiver(info,ENABLE_AUTO_DCD);
+		else
+			usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
+	} else {
+		usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
+		usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
+		usc_EnableInterrupts(info, RECEIVE_DATA);
+
+		usc_RTCmd( info, RTCmd_PurgeRxFifo );
+		usc_RCmd( info, RCmd_EnterHuntmode );
+
+		usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
+	}
+
+	usc_OutReg( info, CCSR, 0x1020 );
+
+	info->rx_enabled = true;
+
+}	/* end of usc_start_receiver() */
+
+/* usc_start_transmitter()
+ *
+ *	Enable the USC transmitter and send a transmit frame if
+ *	one is loaded in the DMA buffers.
+ *
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void usc_start_transmitter( struct mgsl_struct *info )
+{
+	u32 phys_addr;
+	unsigned int FrameSize;
+
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):usc_start_transmitter(%s)\n",
+			 __FILE__,__LINE__, info->device_name );
+			 
+	if ( info->xmit_cnt ) {
+
+		/* If auto RTS enabled and RTS is inactive, then assert */
+		/* RTS and set a flag indicating that the driver should */
+		/* negate RTS when the transmission completes. */
+
+		info->drop_rts_on_tx_done = false;
+
+		if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
+			usc_get_serial_signals( info );
+			if ( !(info->serial_signals & SerialSignal_RTS) ) {
+				info->serial_signals |= SerialSignal_RTS;
+				usc_set_serial_signals( info );
+				info->drop_rts_on_tx_done = true;
+			}
+		}
+
+
+		if ( info->params.mode == MGSL_MODE_ASYNC ) {
+			if ( !info->tx_active ) {
+				usc_UnlatchTxstatusBits(info, TXSTATUS_ALL);
+				usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA);
+				usc_EnableInterrupts(info, TRANSMIT_DATA);
+				usc_load_txfifo(info);
+			}
+		} else {
+			/* Disable transmit DMA controller while programming. */
+			usc_DmaCmd( info, DmaCmd_ResetTxChannel );
+			
+			/* Transmit DMA buffer is loaded, so program USC */
+			/* to send the frame contained in the buffers.	 */
+
+			FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc;
+
+			/* if operating in Raw sync mode, reset the rcc component
+			 * of the tx dma buffer entry, otherwise, the serial controller
+			 * will send a closing sync char after this count.
+			 */
+	    		if ( info->params.mode == MGSL_MODE_RAW )
+				info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0;
+
+			/* Program the Transmit Character Length Register (TCLR) */
+			/* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
+			usc_OutReg( info, TCLR, (u16)FrameSize );
+
+			usc_RTCmd( info, RTCmd_PurgeTxFifo );
+
+			/* Program the address of the 1st DMA Buffer Entry in linked list */
+			phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry;
+			usc_OutDmaReg( info, NTARL, (u16)phys_addr );
+			usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) );
+
+			usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
+			usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
+			usc_EnableInterrupts( info, TRANSMIT_STATUS );
+
+			if ( info->params.mode == MGSL_MODE_RAW &&
+					info->num_tx_dma_buffers > 1 ) {
+			   /* When running external sync mode, attempt to 'stream' transmit  */
+			   /* by filling tx dma buffers as they become available. To do this */
+			   /* we need to enable Tx DMA EOB Status interrupts :               */
+			   /*                                                                */
+			   /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */
+			   /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */
+
+			   usc_OutDmaReg( info, TDIAR, BIT2|BIT3 );
+			   usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) );
+			}
+
+			/* Initialize Transmit DMA Channel */
+			usc_DmaCmd( info, DmaCmd_InitTxChannel );
+			
+			usc_TCmd( info, TCmd_SendFrame );
+			
+			mod_timer(&info->tx_timer, jiffies +
+					msecs_to_jiffies(5000));
+		}
+		info->tx_active = true;
+	}
+
+	if ( !info->tx_enabled ) {
+		info->tx_enabled = true;
+		if ( info->params.flags & HDLC_FLAG_AUTO_CTS )
+			usc_EnableTransmitter(info,ENABLE_AUTO_CTS);
+		else
+			usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
+	}
+
+}	/* end of usc_start_transmitter() */
+
+/* usc_stop_transmitter()
+ *
+ *	Stops the transmitter and DMA
+ *
+ * Arguments:		info	pointer to device isntance data
+ * Return Value:	None
+ */
+static void usc_stop_transmitter( struct mgsl_struct *info )
+{
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):usc_stop_transmitter(%s)\n",
+			 __FILE__,__LINE__, info->device_name );
+			 
+	del_timer(&info->tx_timer);	
+			 
+	usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
+	usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA );
+	usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA );
+
+	usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL);
+	usc_DmaCmd( info, DmaCmd_ResetTxChannel );
+	usc_RTCmd( info, RTCmd_PurgeTxFifo );
+
+	info->tx_enabled = false;
+	info->tx_active = false;
+
+}	/* end of usc_stop_transmitter() */
+
+/* usc_load_txfifo()
+ *
+ *	Fill the transmit FIFO until the FIFO is full or
+ *	there is no more data to load.
+ *
+ * Arguments:		info	pointer to device extension (instance data)
+ * Return Value:	None
+ */
+static void usc_load_txfifo( struct mgsl_struct *info )
+{
+	int Fifocount;
+	u8 TwoBytes[2];
+	
+	if ( !info->xmit_cnt && !info->x_char )
+		return; 
+		
+	/* Select transmit FIFO status readback in TICR */
+	usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
+
+	/* load the Transmit FIFO until FIFOs full or all data sent */
+
+	while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) {
+		/* there is more space in the transmit FIFO and */
+		/* there is more data in transmit buffer */
+
+		if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) {
+ 			/* write a 16-bit word from transmit buffer to 16C32 */
+				
+			TwoBytes[0] = info->xmit_buf[info->xmit_tail++];
+			info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
+			TwoBytes[1] = info->xmit_buf[info->xmit_tail++];
+			info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
+			
+			outw( *((u16 *)TwoBytes), info->io_base + DATAREG);
+				
+			info->xmit_cnt -= 2;
+			info->icount.tx += 2;
+		} else {
+			/* only 1 byte left to transmit or 1 FIFO slot left */
+			
+			outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY),
+				info->io_base + CCAR );
+			
+			if (info->x_char) {
+				/* transmit pending high priority char */
+				outw( info->x_char,info->io_base + CCAR );
+				info->x_char = 0;
+			} else {
+				outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR );
+				info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
+				info->xmit_cnt--;
+			}
+			info->icount.tx++;
+		}
+	}
+
+}	/* end of usc_load_txfifo() */
+
+/* usc_reset()
+ *
+ *	Reset the adapter to a known state and prepare it for further use.
+ *
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void usc_reset( struct mgsl_struct *info )
+{
+	if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
+		int i;
+		u32 readval;
+
+		/* Set BIT30 of Misc Control Register */
+		/* (Local Control Register 0x50) to force reset of USC. */
+
+		volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
+		u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28);
+
+		info->misc_ctrl_value |= BIT30;
+		*MiscCtrl = info->misc_ctrl_value;
+
+		/*
+		 * Force at least 170ns delay before clearing 
+		 * reset bit. Each read from LCR takes at least 
+		 * 30ns so 10 times for 300ns to be safe.
+		 */
+		for(i=0;i<10;i++)
+			readval = *MiscCtrl;
+
+		info->misc_ctrl_value &= ~BIT30;
+		*MiscCtrl = info->misc_ctrl_value;
+
+		*LCR0BRDR = BUS_DESCRIPTOR(
+			1,		// Write Strobe Hold (0-3)
+			2,		// Write Strobe Delay (0-3)
+			2,		// Read Strobe Delay  (0-3)
+			0,		// NWDD (Write data-data) (0-3)
+			4,		// NWAD (Write Addr-data) (0-31)
+			0,		// NXDA (Read/Write Data-Addr) (0-3)
+			0,		// NRDD (Read Data-Data) (0-3)
+			5		// NRAD (Read Addr-Data) (0-31)
+			);
+	} else {
+		/* do HW reset */
+		outb( 0,info->io_base + 8 );
+	}
+
+	info->mbre_bit = 0;
+	info->loopback_bits = 0;
+	info->usc_idle_mode = 0;
+
+	/*
+	 * Program the Bus Configuration Register (BCR)
+	 *
+	 * <15>		0	Don't use separate address
+	 * <14..6>	0	reserved
+	 * <5..4>	00	IAckmode = Default, don't care
+	 * <3>		1	Bus Request Totem Pole output
+	 * <2>		1	Use 16 Bit data bus
+	 * <1>		0	IRQ Totem Pole output
+	 * <0>		0	Don't Shift Right Addr
+	 *
+	 * 0000 0000 0000 1100 = 0x000c
+	 *
+	 * By writing to io_base + SDPIN the Wait/Ack pin is
+	 * programmed to work as a Wait pin.
+	 */
+	
+	outw( 0x000c,info->io_base + SDPIN );
+
+
+	outw( 0,info->io_base );
+	outw( 0,info->io_base + CCAR );
+
+	/* select little endian byte ordering */
+	usc_RTCmd( info, RTCmd_SelectLittleEndian );
+
+
+	/* Port Control Register (PCR)
+	 *
+	 * <15..14>	11	Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled)
+	 * <13..12>	11	Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled)
+	 * <11..10> 	00	Port 5 is Input (No Connect, Don't Care)
+	 * <9..8> 	00	Port 4 is Input (No Connect, Don't Care)
+	 * <7..6>	11	Port 3 is Output (~RTS, Bit 6 : 0 = Enabled )
+	 * <5..4>	11	Port 2 is Output (~DTR, Bit 4 : 0 = Enabled )
+	 * <3..2>	01	Port 1 is Input (Dedicated RxC)
+	 * <1..0>	01	Port 0 is Input (Dedicated TxC)
+	 *
+	 *	1111 0000 1111 0101 = 0xf0f5
+	 */
+
+	usc_OutReg( info, PCR, 0xf0f5 );
+
+
+	/*
+	 * Input/Output Control Register
+	 *
+	 * <15..14>	00	CTS is active low input
+	 * <13..12>	00	DCD is active low input
+	 * <11..10>	00	TxREQ pin is input (DSR)
+	 * <9..8>	00	RxREQ pin is input (RI)
+	 * <7..6>	00	TxD is output (Transmit Data)
+	 * <5..3>	000	TxC Pin in Input (14.7456MHz Clock)
+	 * <2..0>	100	RxC is Output (drive with BRG0)
+	 *
+	 *	0000 0000 0000 0100 = 0x0004
+	 */
+
+	usc_OutReg( info, IOCR, 0x0004 );
+
+}	/* end of usc_reset() */
+
+/* usc_set_async_mode()
+ *
+ *	Program adapter for asynchronous communications.
+ *
+ * Arguments:		info		pointer to device instance data
+ * Return Value:	None
+ */
+static void usc_set_async_mode( struct mgsl_struct *info )
+{
+	u16 RegValue;
+
+	/* disable interrupts while programming USC */
+	usc_DisableMasterIrqBit( info );
+
+	outw( 0, info->io_base ); 			/* clear Master Bus Enable (DCAR) */
+	usc_DmaCmd( info, DmaCmd_ResetAllChannels );	/* disable both DMA channels */
+
+	usc_loopback_frame( info );
+
+	/* Channel mode Register (CMR)
+	 *
+	 * <15..14>	00	Tx Sub modes, 00 = 1 Stop Bit
+	 * <13..12>	00	              00 = 16X Clock
+	 * <11..8>	0000	Transmitter mode = Asynchronous
+	 * <7..6>	00	reserved?
+	 * <5..4>	00	Rx Sub modes, 00 = 16X Clock
+	 * <3..0>	0000	Receiver mode = Asynchronous
+	 *
+	 * 0000 0000 0000 0000 = 0x0
+	 */
+
+	RegValue = 0;
+	if ( info->params.stop_bits != 1 )
+		RegValue |= BIT14;
+	usc_OutReg( info, CMR, RegValue );
+
+	
+	/* Receiver mode Register (RMR)
+	 *
+	 * <15..13>	000	encoding = None
+	 * <12..08>	00000	reserved (Sync Only)
+	 * <7..6>   	00	Even parity
+	 * <5>		0	parity disabled
+	 * <4..2>	000	Receive Char Length = 8 bits
+	 * <1..0>	00	Disable Receiver
+	 *
+	 * 0000 0000 0000 0000 = 0x0
+	 */
+
+	RegValue = 0;
+
+	if ( info->params.data_bits != 8 )
+		RegValue |= BIT4+BIT3+BIT2;
+
+	if ( info->params.parity != ASYNC_PARITY_NONE ) {
+		RegValue |= BIT5;
+		if ( info->params.parity != ASYNC_PARITY_ODD )
+			RegValue |= BIT6;
+	}
+
+	usc_OutReg( info, RMR, RegValue );
+
+
+	/* Set IRQ trigger level */
+
+	usc_RCmd( info, RCmd_SelectRicrIntLevel );
+
+	
+	/* Receive Interrupt Control Register (RICR)
+	 *
+	 * <15..8>	?		RxFIFO IRQ Request Level
+	 *
+	 * Note: For async mode the receive FIFO level must be set
+	 * to 0 to avoid the situation where the FIFO contains fewer bytes
+	 * than the trigger level and no more data is expected.
+	 *
+	 * <7>		0		Exited Hunt IA (Interrupt Arm)
+	 * <6>		0		Idle Received IA
+	 * <5>		0		Break/Abort IA
+	 * <4>		0		Rx Bound IA
+	 * <3>		0		Queued status reflects oldest byte in FIFO
+	 * <2>		0		Abort/PE IA
+	 * <1>		0		Rx Overrun IA
+	 * <0>		0		Select TC0 value for readback
+	 *
+	 * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB)
+	 */
+	
+	usc_OutReg( info, RICR, 0x0000 );
+
+	usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
+	usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
+
+	
+	/* Transmit mode Register (TMR)
+	 *
+	 * <15..13>	000	encoding = None
+	 * <12..08>	00000	reserved (Sync Only)
+	 * <7..6>	00	Transmit parity Even
+	 * <5>		0	Transmit parity Disabled
+	 * <4..2>	000	Tx Char Length = 8 bits
+	 * <1..0>	00	Disable Transmitter
+	 *
+	 * 0000 0000 0000 0000 = 0x0
+	 */
+
+	RegValue = 0;
+
+	if ( info->params.data_bits != 8 )
+		RegValue |= BIT4+BIT3+BIT2;
+
+	if ( info->params.parity != ASYNC_PARITY_NONE ) {
+		RegValue |= BIT5;
+		if ( info->params.parity != ASYNC_PARITY_ODD )
+			RegValue |= BIT6;
+	}
+
+	usc_OutReg( info, TMR, RegValue );
+
+	usc_set_txidle( info );
+
+
+	/* Set IRQ trigger level */
+
+	usc_TCmd( info, TCmd_SelectTicrIntLevel );
+
+	
+	/* Transmit Interrupt Control Register (TICR)
+	 *
+	 * <15..8>	?	Transmit FIFO IRQ Level
+	 * <7>		0	Present IA (Interrupt Arm)
+	 * <6>		1	Idle Sent IA
+	 * <5>		0	Abort Sent IA
+	 * <4>		0	EOF/EOM Sent IA
+	 * <3>		0	CRC Sent IA
+	 * <2>		0	1 = Wait for SW Trigger to Start Frame
+	 * <1>		0	Tx Underrun IA
+	 * <0>		0	TC0 constant on read back
+	 *
+	 *	0000 0000 0100 0000 = 0x0040
+	 */
+
+	usc_OutReg( info, TICR, 0x1f40 );
+
+	usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
+	usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
+
+	usc_enable_async_clock( info, info->params.data_rate );
+
+	
+	/* Channel Control/status Register (CCSR)
+	 *
+	 * <15>		X	RCC FIFO Overflow status (RO)
+	 * <14>		X	RCC FIFO Not Empty status (RO)
+	 * <13>		0	1 = Clear RCC FIFO (WO)
+	 * <12>		X	DPLL in Sync status (RO)
+	 * <11>		X	DPLL 2 Missed Clocks status (RO)
+	 * <10>		X	DPLL 1 Missed Clock status (RO)
+	 * <9..8>	00	DPLL Resync on rising and falling edges (RW)
+	 * <7>		X	SDLC Loop On status (RO)
+	 * <6>		X	SDLC Loop Send status (RO)
+	 * <5>		1	Bypass counters for TxClk and RxClk (RW)
+	 * <4..2>   	000	Last Char of SDLC frame has 8 bits (RW)
+	 * <1..0>   	00	reserved
+	 *
+	 *	0000 0000 0010 0000 = 0x0020
+	 */
+	
+	usc_OutReg( info, CCSR, 0x0020 );
+
+	usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA +
+			      RECEIVE_DATA + RECEIVE_STATUS );
+
+	usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA +
+				RECEIVE_DATA + RECEIVE_STATUS );
+
+	usc_EnableMasterIrqBit( info );
+
+	if (info->bus_type == MGSL_BUS_TYPE_ISA) {
+		/* Enable INTEN (Port 6, Bit12) */
+		/* This connects the IRQ request signal to the ISA bus */
+		usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
+	}
+
+	if (info->params.loopback) {
+		info->loopback_bits = 0x300;
+		outw(0x0300, info->io_base + CCAR);
+	}
+
+}	/* end of usc_set_async_mode() */
+
+/* usc_loopback_frame()
+ *
+ *	Loop back a small (2 byte) dummy SDLC frame.
+ *	Interrupts and DMA are NOT used. The purpose of this is to
+ *	clear any 'stale' status info left over from running in	async mode.
+ *
+ *	The 16C32 shows the strange behaviour of marking the 1st
+ *	received SDLC frame with a CRC error even when there is no
+ *	CRC error. To get around this a small dummy from of 2 bytes
+ *	is looped back when switching from async to sync mode.
+ *
+ * Arguments:		info		pointer to device instance data
+ * Return Value:	None
+ */
+static void usc_loopback_frame( struct mgsl_struct *info )
+{
+	int i;
+	unsigned long oldmode = info->params.mode;
+
+	info->params.mode = MGSL_MODE_HDLC;
+	
+	usc_DisableMasterIrqBit( info );
+
+	usc_set_sdlc_mode( info );
+	usc_enable_loopback( info, 1 );
+
+	/* Write 16-bit Time Constant for BRG0 */
+	usc_OutReg( info, TC0R, 0 );
+	
+	/* Channel Control Register (CCR)
+	 *
+	 * <15..14>	00	Don't use 32-bit Tx Control Blocks (TCBs)
+	 * <13>		0	Trigger Tx on SW Command Disabled
+	 * <12>		0	Flag Preamble Disabled
+	 * <11..10>	00	Preamble Length = 8-Bits
+	 * <9..8>	01	Preamble Pattern = flags
+	 * <7..6>	10	Don't use 32-bit Rx status Blocks (RSBs)
+	 * <5>		0	Trigger Rx on SW Command Disabled
+	 * <4..0>	0	reserved
+	 *
+	 *	0000 0001 0000 0000 = 0x0100
+	 */
+
+	usc_OutReg( info, CCR, 0x0100 );
+
+	/* SETUP RECEIVER */
+	usc_RTCmd( info, RTCmd_PurgeRxFifo );
+	usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
+
+	/* SETUP TRANSMITTER */
+	/* Program the Transmit Character Length Register (TCLR) */
+	/* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
+	usc_OutReg( info, TCLR, 2 );
+	usc_RTCmd( info, RTCmd_PurgeTxFifo );
+
+	/* unlatch Tx status bits, and start transmit channel. */
+	usc_UnlatchTxstatusBits(info,TXSTATUS_ALL);
+	outw(0,info->io_base + DATAREG);
+
+	/* ENABLE TRANSMITTER */
+	usc_TCmd( info, TCmd_SendFrame );
+	usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
+							
+	/* WAIT FOR RECEIVE COMPLETE */
+	for (i=0 ; i<1000 ; i++)
+		if (usc_InReg( info, RCSR ) & (BIT8 + BIT4 + BIT3 + BIT1))
+			break;
+
+	/* clear Internal Data loopback mode */
+	usc_enable_loopback(info, 0);
+
+	usc_EnableMasterIrqBit(info);
+
+	info->params.mode = oldmode;
+
+}	/* end of usc_loopback_frame() */
+
+/* usc_set_sync_mode()	Programs the USC for SDLC communications.
+ *
+ * Arguments:		info	pointer to adapter info structure
+ * Return Value:	None
+ */
+static void usc_set_sync_mode( struct mgsl_struct *info )
+{
+	usc_loopback_frame( info );
+	usc_set_sdlc_mode( info );
+
+	if (info->bus_type == MGSL_BUS_TYPE_ISA) {
+		/* Enable INTEN (Port 6, Bit12) */
+		/* This connects the IRQ request signal to the ISA bus */
+		usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
+	}
+
+	usc_enable_aux_clock(info, info->params.clock_speed);
+
+	if (info->params.loopback)
+		usc_enable_loopback(info,1);
+
+}	/* end of mgsl_set_sync_mode() */
+
+/* usc_set_txidle()	Set the HDLC idle mode for the transmitter.
+ *
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void usc_set_txidle( struct mgsl_struct *info )
+{
+	u16 usc_idle_mode = IDLEMODE_FLAGS;
+
+	/* Map API idle mode to USC register bits */
+
+	switch( info->idle_mode ){
+	case HDLC_TXIDLE_FLAGS:			usc_idle_mode = IDLEMODE_FLAGS; break;
+	case HDLC_TXIDLE_ALT_ZEROS_ONES:	usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break;
+	case HDLC_TXIDLE_ZEROS:			usc_idle_mode = IDLEMODE_ZERO; break;
+	case HDLC_TXIDLE_ONES:			usc_idle_mode = IDLEMODE_ONE; break;
+	case HDLC_TXIDLE_ALT_MARK_SPACE:	usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break;
+	case HDLC_TXIDLE_SPACE:			usc_idle_mode = IDLEMODE_SPACE; break;
+	case HDLC_TXIDLE_MARK:			usc_idle_mode = IDLEMODE_MARK; break;
+	}
+
+	info->usc_idle_mode = usc_idle_mode;
+	//usc_OutReg(info, TCSR, usc_idle_mode);
+	info->tcsr_value &= ~IDLEMODE_MASK;	/* clear idle mode bits */
+	info->tcsr_value += usc_idle_mode;
+	usc_OutReg(info, TCSR, info->tcsr_value);
+
+	/*
+	 * if SyncLink WAN adapter is running in external sync mode, the
+	 * transmitter has been set to Monosync in order to try to mimic
+	 * a true raw outbound bit stream. Monosync still sends an open/close
+	 * sync char at the start/end of a frame. Try to match those sync
+	 * patterns to the idle mode set here
+	 */
+	if ( info->params.mode == MGSL_MODE_RAW ) {
+		unsigned char syncpat = 0;
+		switch( info->idle_mode ) {
+		case HDLC_TXIDLE_FLAGS:
+			syncpat = 0x7e;
+			break;
+		case HDLC_TXIDLE_ALT_ZEROS_ONES:
+			syncpat = 0x55;
+			break;
+		case HDLC_TXIDLE_ZEROS:
+		case HDLC_TXIDLE_SPACE:
+			syncpat = 0x00;
+			break;
+		case HDLC_TXIDLE_ONES:
+		case HDLC_TXIDLE_MARK:
+			syncpat = 0xff;
+			break;
+		case HDLC_TXIDLE_ALT_MARK_SPACE:
+			syncpat = 0xaa;
+			break;
+		}
+
+		usc_SetTransmitSyncChars(info,syncpat,syncpat);
+	}
+
+}	/* end of usc_set_txidle() */
+
+/* usc_get_serial_signals()
+ *
+ *	Query the adapter for the state of the V24 status (input) signals.
+ *
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void usc_get_serial_signals( struct mgsl_struct *info )
+{
+	u16 status;
+
+	/* clear all serial signals except DTR and RTS */
+	info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
+
+	/* Read the Misc Interrupt status Register (MISR) to get */
+	/* the V24 status signals. */
+
+	status = usc_InReg( info, MISR );
+
+	/* set serial signal bits to reflect MISR */
+
+	if ( status & MISCSTATUS_CTS )
+		info->serial_signals |= SerialSignal_CTS;
+
+	if ( status & MISCSTATUS_DCD )
+		info->serial_signals |= SerialSignal_DCD;
+
+	if ( status & MISCSTATUS_RI )
+		info->serial_signals |= SerialSignal_RI;
+
+	if ( status & MISCSTATUS_DSR )
+		info->serial_signals |= SerialSignal_DSR;
+
+}	/* end of usc_get_serial_signals() */
+
+/* usc_set_serial_signals()
+ *
+ *	Set the state of DTR and RTS based on contents of
+ *	serial_signals member of device extension.
+ *	
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void usc_set_serial_signals( struct mgsl_struct *info )
+{
+	u16 Control;
+	unsigned char V24Out = info->serial_signals;
+
+	/* get the current value of the Port Control Register (PCR) */
+
+	Control = usc_InReg( info, PCR );
+
+	if ( V24Out & SerialSignal_RTS )
+		Control &= ~(BIT6);
+	else
+		Control |= BIT6;
+
+	if ( V24Out & SerialSignal_DTR )
+		Control &= ~(BIT4);
+	else
+		Control |= BIT4;
+
+	usc_OutReg( info, PCR, Control );
+
+}	/* end of usc_set_serial_signals() */
+
+/* usc_enable_async_clock()
+ *
+ *	Enable the async clock at the specified frequency.
+ *
+ * Arguments:		info		pointer to device instance data
+ *			data_rate	data rate of clock in bps
+ *					0 disables the AUX clock.
+ * Return Value:	None
+ */
+static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
+{
+	if ( data_rate )	{
+		/*
+		 * Clock mode Control Register (CMCR)
+		 * 
+		 * <15..14>     00      counter 1 Disabled
+		 * <13..12>     00      counter 0 Disabled
+		 * <11..10>     11      BRG1 Input is TxC Pin
+		 * <9..8>       11      BRG0 Input is TxC Pin
+		 * <7..6>       01      DPLL Input is BRG1 Output
+		 * <5..3>       100     TxCLK comes from BRG0
+		 * <2..0>       100     RxCLK comes from BRG0
+		 *
+		 * 0000 1111 0110 0100 = 0x0f64
+		 */
+		
+		usc_OutReg( info, CMCR, 0x0f64 );
+
+
+		/*
+		 * Write 16-bit Time Constant for BRG0
+		 * Time Constant = (ClkSpeed / data_rate) - 1
+		 * ClkSpeed = 921600 (ISA), 691200 (PCI)
+		 */
+
+		if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+			usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) );
+		else
+			usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) );
+
+		
+		/*
+		 * Hardware Configuration Register (HCR)
+		 * Clear Bit 1, BRG0 mode = Continuous
+		 * Set Bit 0 to enable BRG0.
+		 */
+
+		usc_OutReg( info, HCR,
+			    (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
+
+
+		/* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
+
+		usc_OutReg( info, IOCR,
+			    (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
+	} else {
+		/* data rate == 0 so turn off BRG0 */
+		usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
+	}
+
+}	/* end of usc_enable_async_clock() */
+
+/*
+ * Buffer Structures:
+ *
+ * Normal memory access uses virtual addresses that can make discontiguous
+ * physical memory pages appear to be contiguous in the virtual address
+ * space (the processors memory mapping handles the conversions).
+ *
+ * DMA transfers require physically contiguous memory. This is because
+ * the DMA system controller and DMA bus masters deal with memory using
+ * only physical addresses.
+ *
+ * This causes a problem under Windows NT when large DMA buffers are
+ * needed. Fragmentation of the nonpaged pool prevents allocations of
+ * physically contiguous buffers larger than the PAGE_SIZE.
+ *
+ * However the 16C32 supports Bus Master Scatter/Gather DMA which
+ * allows DMA transfers to physically discontiguous buffers. Information
+ * about each data transfer buffer is contained in a memory structure
+ * called a 'buffer entry'. A list of buffer entries is maintained
+ * to track and control the use of the data transfer buffers.
+ *
+ * To support this strategy we will allocate sufficient PAGE_SIZE
+ * contiguous memory buffers to allow for the total required buffer
+ * space.
+ *
+ * The 16C32 accesses the list of buffer entries using Bus Master
+ * DMA. Control information is read from the buffer entries by the
+ * 16C32 to control data transfers. status information is written to
+ * the buffer entries by the 16C32 to indicate the status of completed
+ * transfers.
+ *
+ * The CPU writes control information to the buffer entries to control
+ * the 16C32 and reads status information from the buffer entries to
+ * determine information about received and transmitted frames.
+ *
+ * Because the CPU and 16C32 (adapter) both need simultaneous access
+ * to the buffer entries, the buffer entry memory is allocated with
+ * HalAllocateCommonBuffer(). This restricts the size of the buffer
+ * entry list to PAGE_SIZE.
+ *
+ * The actual data buffers on the other hand will only be accessed
+ * by the CPU or the adapter but not by both simultaneously. This allows
+ * Scatter/Gather packet based DMA procedures for using physically
+ * discontiguous pages.
+ */
+
+/*
+ * mgsl_reset_tx_dma_buffers()
+ *
+ * 	Set the count for all transmit buffers to 0 to indicate the
+ * 	buffer is available for use and set the current buffer to the
+ * 	first buffer. This effectively makes all buffers free and
+ * 	discards any data in buffers.
+ *
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info )
+{
+	unsigned int i;
+
+	for ( i = 0; i < info->tx_buffer_count; i++ ) {
+		*((unsigned long *)&(info->tx_buffer_list[i].count)) = 0;
+	}
+
+	info->current_tx_buffer = 0;
+	info->start_tx_dma_buffer = 0;
+	info->tx_dma_buffers_used = 0;
+
+	info->get_tx_holding_index = 0;
+	info->put_tx_holding_index = 0;
+	info->tx_holding_count = 0;
+
+}	/* end of mgsl_reset_tx_dma_buffers() */
+
+/*
+ * num_free_tx_dma_buffers()
+ *
+ * 	returns the number of free tx dma buffers available
+ *
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	number of free tx dma buffers
+ */
+static int num_free_tx_dma_buffers(struct mgsl_struct *info)
+{
+	return info->tx_buffer_count - info->tx_dma_buffers_used;
+}
+
+/*
+ * mgsl_reset_rx_dma_buffers()
+ * 
+ * 	Set the count for all receive buffers to DMABUFFERSIZE
+ * 	and set the current buffer to the first buffer. This effectively
+ * 	makes all buffers free and discards any data in buffers.
+ * 
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info )
+{
+	unsigned int i;
+
+	for ( i = 0; i < info->rx_buffer_count; i++ ) {
+		*((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE;
+//		info->rx_buffer_list[i].count = DMABUFFERSIZE;
+//		info->rx_buffer_list[i].status = 0;
+	}
+
+	info->current_rx_buffer = 0;
+
+}	/* end of mgsl_reset_rx_dma_buffers() */
+
+/*
+ * mgsl_free_rx_frame_buffers()
+ * 
+ * 	Free the receive buffers used by a received SDLC
+ * 	frame such that the buffers can be reused.
+ * 
+ * Arguments:
+ * 
+ * 	info			pointer to device instance data
+ * 	StartIndex		index of 1st receive buffer of frame
+ * 	EndIndex		index of last receive buffer of frame
+ * 
+ * Return Value:	None
+ */
+static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex )
+{
+	bool Done = false;
+	DMABUFFERENTRY *pBufEntry;
+	unsigned int Index;
+
+	/* Starting with 1st buffer entry of the frame clear the status */
+	/* field and set the count field to DMA Buffer Size. */
+
+	Index = StartIndex;
+
+	while( !Done ) {
+		pBufEntry = &(info->rx_buffer_list[Index]);
+
+		if ( Index == EndIndex ) {
+			/* This is the last buffer of the frame! */
+			Done = true;
+		}
+
+		/* reset current buffer for reuse */
+//		pBufEntry->status = 0;
+//		pBufEntry->count = DMABUFFERSIZE;
+		*((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE;
+
+		/* advance to next buffer entry in linked list */
+		Index++;
+		if ( Index == info->rx_buffer_count )
+			Index = 0;
+	}
+
+	/* set current buffer to next buffer after last buffer of frame */
+	info->current_rx_buffer = Index;
+
+}	/* end of free_rx_frame_buffers() */
+
+/* mgsl_get_rx_frame()
+ * 
+ * 	This function attempts to return a received SDLC frame from the
+ * 	receive DMA buffers. Only frames received without errors are returned.
+ *
+ * Arguments:	 	info	pointer to device extension
+ * Return Value:	true if frame returned, otherwise false
+ */
+static bool mgsl_get_rx_frame(struct mgsl_struct *info)
+{
+	unsigned int StartIndex, EndIndex;	/* index of 1st and last buffers of Rx frame */
+	unsigned short status;
+	DMABUFFERENTRY *pBufEntry;
+	unsigned int framesize = 0;
+	bool ReturnCode = false;
+	unsigned long flags;
+	struct tty_struct *tty = info->port.tty;
+	bool return_frame = false;
+	
+	/*
+	 * current_rx_buffer points to the 1st buffer of the next available
+	 * receive frame. To find the last buffer of the frame look for
+	 * a non-zero status field in the buffer entries. (The status
+	 * field is set by the 16C32 after completing a receive frame.
+	 */
+
+	StartIndex = EndIndex = info->current_rx_buffer;
+
+	while( !info->rx_buffer_list[EndIndex].status ) {
+		/*
+		 * If the count field of the buffer entry is non-zero then
+		 * this buffer has not been used. (The 16C32 clears the count
+		 * field when it starts using the buffer.) If an unused buffer
+		 * is encountered then there are no frames available.
+		 */
+
+		if ( info->rx_buffer_list[EndIndex].count )
+			goto Cleanup;
+
+		/* advance to next buffer entry in linked list */
+		EndIndex++;
+		if ( EndIndex == info->rx_buffer_count )
+			EndIndex = 0;
+
+		/* if entire list searched then no frame available */
+		if ( EndIndex == StartIndex ) {
+			/* If this occurs then something bad happened,
+			 * all buffers have been 'used' but none mark
+			 * the end of a frame. Reset buffers and receiver.
+			 */
+
+			if ( info->rx_enabled ){
+				spin_lock_irqsave(&info->irq_spinlock,flags);
+				usc_start_receiver(info);
+				spin_unlock_irqrestore(&info->irq_spinlock,flags);
+			}
+			goto Cleanup;
+		}
+	}
+
+
+	/* check status of receive frame */
+	
+	status = info->rx_buffer_list[EndIndex].status;
+
+	if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
+			RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
+		if ( status & RXSTATUS_SHORT_FRAME )
+			info->icount.rxshort++;
+		else if ( status & RXSTATUS_ABORT )
+			info->icount.rxabort++;
+		else if ( status & RXSTATUS_OVERRUN )
+			info->icount.rxover++;
+		else {
+			info->icount.rxcrc++;
+			if ( info->params.crc_type & HDLC_CRC_RETURN_EX )
+				return_frame = true;
+		}
+		framesize = 0;
+#if SYNCLINK_GENERIC_HDLC
+		{
+			info->netdev->stats.rx_errors++;
+			info->netdev->stats.rx_frame_errors++;
+		}
+#endif
+	} else
+		return_frame = true;
+
+	if ( return_frame ) {
+		/* receive frame has no errors, get frame size.
+		 * The frame size is the starting value of the RCC (which was
+		 * set to 0xffff) minus the ending value of the RCC (decremented
+		 * once for each receive character) minus 2 for the 16-bit CRC.
+		 */
+
+		framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc;
+
+		/* adjust frame size for CRC if any */
+		if ( info->params.crc_type == HDLC_CRC_16_CCITT )
+			framesize -= 2;
+		else if ( info->params.crc_type == HDLC_CRC_32_CCITT )
+			framesize -= 4;		
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n",
+			__FILE__,__LINE__,info->device_name,status,framesize);
+			
+	if ( debug_level >= DEBUG_LEVEL_DATA )
+		mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
+			min_t(int, framesize, DMABUFFERSIZE),0);
+		
+	if (framesize) {
+		if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
+				((framesize+1) > info->max_frame_size) ) ||
+			(framesize > info->max_frame_size) )
+			info->icount.rxlong++;
+		else {
+			/* copy dma buffer(s) to contiguous intermediate buffer */
+			int copy_count = framesize;
+			int index = StartIndex;
+			unsigned char *ptmp = info->intermediate_rxbuffer;
+
+			if ( !(status & RXSTATUS_CRC_ERROR))
+			info->icount.rxok++;
+			
+			while(copy_count) {
+				int partial_count;
+				if ( copy_count > DMABUFFERSIZE )
+					partial_count = DMABUFFERSIZE;
+				else
+					partial_count = copy_count;
+			
+				pBufEntry = &(info->rx_buffer_list[index]);
+				memcpy( ptmp, pBufEntry->virt_addr, partial_count );
+				ptmp += partial_count;
+				copy_count -= partial_count;
+				
+				if ( ++index == info->rx_buffer_count )
+					index = 0;
+			}
+
+			if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) {
+				++framesize;
+				*ptmp = (status & RXSTATUS_CRC_ERROR ?
+						RX_CRC_ERROR :
+						RX_OK);
+
+				if ( debug_level >= DEBUG_LEVEL_DATA )
+					printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n",
+						__FILE__,__LINE__,info->device_name,
+						*ptmp);
+			}
+
+#if SYNCLINK_GENERIC_HDLC
+			if (info->netcount)
+				hdlcdev_rx(info,info->intermediate_rxbuffer,framesize);
+			else
+#endif
+				ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
+		}
+	}
+	/* Free the buffers used by this frame. */
+	mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex );
+
+	ReturnCode = true;
+
+Cleanup:
+
+	if ( info->rx_enabled && info->rx_overflow ) {
+		/* The receiver needs to restarted because of 
+		 * a receive overflow (buffer or FIFO). If the 
+		 * receive buffers are now empty, then restart receiver.
+		 */
+
+		if ( !info->rx_buffer_list[EndIndex].status &&
+			info->rx_buffer_list[EndIndex].count ) {
+			spin_lock_irqsave(&info->irq_spinlock,flags);
+			usc_start_receiver(info);
+			spin_unlock_irqrestore(&info->irq_spinlock,flags);
+		}
+	}
+
+	return ReturnCode;
+
+}	/* end of mgsl_get_rx_frame() */
+
+/* mgsl_get_raw_rx_frame()
+ *
+ *     	This function attempts to return a received frame from the
+ *	receive DMA buffers when running in external loop mode. In this mode,
+ *	we will return at most one DMABUFFERSIZE frame to the application.
+ *	The USC receiver is triggering off of DCD going active to start a new
+ *	frame, and DCD going inactive to terminate the frame (similar to
+ *	processing a closing flag character).
+ *
+ *	In this routine, we will return DMABUFFERSIZE "chunks" at a time.
+ *	If DCD goes inactive, the last Rx DMA Buffer will have a non-zero
+ * 	status field and the RCC field will indicate the length of the
+ *	entire received frame. We take this RCC field and get the modulus
+ *	of RCC and DMABUFFERSIZE to determine if number of bytes in the
+ *	last Rx DMA buffer and return that last portion of the frame.
+ *
+ * Arguments:	 	info	pointer to device extension
+ * Return Value:	true if frame returned, otherwise false
+ */
+static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info)
+{
+	unsigned int CurrentIndex, NextIndex;
+	unsigned short status;
+	DMABUFFERENTRY *pBufEntry;
+	unsigned int framesize = 0;
+	bool ReturnCode = false;
+	unsigned long flags;
+	struct tty_struct *tty = info->port.tty;
+
+	/*
+ 	 * current_rx_buffer points to the 1st buffer of the next available
+	 * receive frame. The status field is set by the 16C32 after
+	 * completing a receive frame. If the status field of this buffer
+	 * is zero, either the USC is still filling this buffer or this
+	 * is one of a series of buffers making up a received frame.
+	 *
+	 * If the count field of this buffer is zero, the USC is either
+	 * using this buffer or has used this buffer. Look at the count
+	 * field of the next buffer. If that next buffer's count is
+	 * non-zero, the USC is still actively using the current buffer.
+	 * Otherwise, if the next buffer's count field is zero, the
+	 * current buffer is complete and the USC is using the next
+	 * buffer.
+	 */
+	CurrentIndex = NextIndex = info->current_rx_buffer;
+	++NextIndex;
+	if ( NextIndex == info->rx_buffer_count )
+		NextIndex = 0;
+
+	if ( info->rx_buffer_list[CurrentIndex].status != 0 ||
+		(info->rx_buffer_list[CurrentIndex].count == 0 &&
+			info->rx_buffer_list[NextIndex].count == 0)) {
+		/*
+	 	 * Either the status field of this dma buffer is non-zero
+		 * (indicating the last buffer of a receive frame) or the next
+	 	 * buffer is marked as in use -- implying this buffer is complete
+		 * and an intermediate buffer for this received frame.
+	 	 */
+
+		status = info->rx_buffer_list[CurrentIndex].status;
+
+		if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
+				RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
+			if ( status & RXSTATUS_SHORT_FRAME )
+				info->icount.rxshort++;
+			else if ( status & RXSTATUS_ABORT )
+				info->icount.rxabort++;
+			else if ( status & RXSTATUS_OVERRUN )
+				info->icount.rxover++;
+			else
+				info->icount.rxcrc++;
+			framesize = 0;
+		} else {
+			/*
+			 * A receive frame is available, get frame size and status.
+			 *
+			 * The frame size is the starting value of the RCC (which was
+			 * set to 0xffff) minus the ending value of the RCC (decremented
+			 * once for each receive character) minus 2 or 4 for the 16-bit
+			 * or 32-bit CRC.
+			 *
+			 * If the status field is zero, this is an intermediate buffer.
+			 * It's size is 4K.
+			 *
+			 * If the DMA Buffer Entry's Status field is non-zero, the
+			 * receive operation completed normally (ie: DCD dropped). The
+			 * RCC field is valid and holds the received frame size.
+			 * It is possible that the RCC field will be zero on a DMA buffer
+			 * entry with a non-zero status. This can occur if the total
+			 * frame size (number of bytes between the time DCD goes active
+			 * to the time DCD goes inactive) exceeds 65535 bytes. In this
+			 * case the 16C32 has underrun on the RCC count and appears to
+			 * stop updating this counter to let us know the actual received
+			 * frame size. If this happens (non-zero status and zero RCC),
+			 * simply return the entire RxDMA Buffer
+			 */
+			if ( status ) {
+				/*
+				 * In the event that the final RxDMA Buffer is
+				 * terminated with a non-zero status and the RCC
+				 * field is zero, we interpret this as the RCC
+				 * having underflowed (received frame > 65535 bytes).
+				 *
+				 * Signal the event to the user by passing back
+				 * a status of RxStatus_CrcError returning the full
+				 * buffer and let the app figure out what data is
+				 * actually valid
+				 */
+				if ( info->rx_buffer_list[CurrentIndex].rcc )
+					framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc;
+				else
+					framesize = DMABUFFERSIZE;
+			}
+			else
+				framesize = DMABUFFERSIZE;
+		}
+
+		if ( framesize > DMABUFFERSIZE ) {
+			/*
+			 * if running in raw sync mode, ISR handler for
+			 * End Of Buffer events terminates all buffers at 4K.
+			 * If this frame size is said to be >4K, get the
+			 * actual number of bytes of the frame in this buffer.
+			 */
+			framesize = framesize % DMABUFFERSIZE;
+		}
+
+
+		if ( debug_level >= DEBUG_LEVEL_BH )
+			printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n",
+				__FILE__,__LINE__,info->device_name,status,framesize);
+
+		if ( debug_level >= DEBUG_LEVEL_DATA )
+			mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr,
+				min_t(int, framesize, DMABUFFERSIZE),0);
+
+		if (framesize) {
+			/* copy dma buffer(s) to contiguous intermediate buffer */
+			/* NOTE: we never copy more than DMABUFFERSIZE bytes	*/
+
+			pBufEntry = &(info->rx_buffer_list[CurrentIndex]);
+			memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize);
+			info->icount.rxok++;
+
+			ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
+		}
+
+		/* Free the buffers used by this frame. */
+		mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex );
+
+		ReturnCode = true;
+	}
+
+
+	if ( info->rx_enabled && info->rx_overflow ) {
+		/* The receiver needs to restarted because of
+		 * a receive overflow (buffer or FIFO). If the
+		 * receive buffers are now empty, then restart receiver.
+		 */
+
+		if ( !info->rx_buffer_list[CurrentIndex].status &&
+			info->rx_buffer_list[CurrentIndex].count ) {
+			spin_lock_irqsave(&info->irq_spinlock,flags);
+			usc_start_receiver(info);
+			spin_unlock_irqrestore(&info->irq_spinlock,flags);
+		}
+	}
+
+	return ReturnCode;
+
+}	/* end of mgsl_get_raw_rx_frame() */
+
+/* mgsl_load_tx_dma_buffer()
+ * 
+ * 	Load the transmit DMA buffer with the specified data.
+ * 
+ * Arguments:
+ * 
+ * 	info		pointer to device extension
+ * 	Buffer		pointer to buffer containing frame to load
+ * 	BufferSize	size in bytes of frame in Buffer
+ * 
+ * Return Value: 	None
+ */
+static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
+		const char *Buffer, unsigned int BufferSize)
+{
+	unsigned short Copycount;
+	unsigned int i = 0;
+	DMABUFFERENTRY *pBufEntry;
+	
+	if ( debug_level >= DEBUG_LEVEL_DATA )
+		mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);
+
+	if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
+		/* set CMR:13 to start transmit when
+		 * next GoAhead (abort) is received
+		 */
+	 	info->cmr_value |= BIT13;			  
+	}
+		
+	/* begin loading the frame in the next available tx dma
+	 * buffer, remember it's starting location for setting
+	 * up tx dma operation
+	 */
+	i = info->current_tx_buffer;
+	info->start_tx_dma_buffer = i;
+
+	/* Setup the status and RCC (Frame Size) fields of the 1st */
+	/* buffer entry in the transmit DMA buffer list. */
+
+	info->tx_buffer_list[i].status = info->cmr_value & 0xf000;
+	info->tx_buffer_list[i].rcc    = BufferSize;
+	info->tx_buffer_list[i].count  = BufferSize;
+
+	/* Copy frame data from 1st source buffer to the DMA buffers. */
+	/* The frame data may span multiple DMA buffers. */
+
+	while( BufferSize ){
+		/* Get a pointer to next DMA buffer entry. */
+		pBufEntry = &info->tx_buffer_list[i++];
+			
+		if ( i == info->tx_buffer_count )
+			i=0;
+
+		/* Calculate the number of bytes that can be copied from */
+		/* the source buffer to this DMA buffer. */
+		if ( BufferSize > DMABUFFERSIZE )
+			Copycount = DMABUFFERSIZE;
+		else
+			Copycount = BufferSize;
+
+		/* Actually copy data from source buffer to DMA buffer. */
+		/* Also set the data count for this individual DMA buffer. */
+		if ( info->bus_type == MGSL_BUS_TYPE_PCI )
+			mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount);
+		else
+			memcpy(pBufEntry->virt_addr, Buffer, Copycount);
+
+		pBufEntry->count = Copycount;
+
+		/* Advance source pointer and reduce remaining data count. */
+		Buffer += Copycount;
+		BufferSize -= Copycount;
+
+		++info->tx_dma_buffers_used;
+	}
+
+	/* remember next available tx dma buffer */
+	info->current_tx_buffer = i;
+
+}	/* end of mgsl_load_tx_dma_buffer() */
+
+/*
+ * mgsl_register_test()
+ * 
+ * 	Performs a register test of the 16C32.
+ * 	
+ * Arguments:		info	pointer to device instance data
+ * Return Value:		true if test passed, otherwise false
+ */
+static bool mgsl_register_test( struct mgsl_struct *info )
+{
+	static unsigned short BitPatterns[] =
+		{ 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f };
+	static unsigned int Patterncount = ARRAY_SIZE(BitPatterns);
+	unsigned int i;
+	bool rc = true;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	usc_reset(info);
+
+	/* Verify the reset state of some registers. */
+
+	if ( (usc_InReg( info, SICR ) != 0) ||
+		  (usc_InReg( info, IVR  ) != 0) ||
+		  (usc_InDmaReg( info, DIVR ) != 0) ){
+		rc = false;
+	}
+
+	if ( rc ){
+		/* Write bit patterns to various registers but do it out of */
+		/* sync, then read back and verify values. */
+
+		for ( i = 0 ; i < Patterncount ; i++ ) {
+			usc_OutReg( info, TC0R, BitPatterns[i] );
+			usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] );
+			usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] );
+			usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] );
+			usc_OutReg( info, RSR,  BitPatterns[(i+4)%Patterncount] );
+			usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] );
+
+			if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) ||
+				  (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) ||
+				  (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) ||
+				  (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) ||
+				  (usc_InReg( info, RSR )  != BitPatterns[(i+4)%Patterncount]) ||
+				  (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){
+				rc = false;
+				break;
+			}
+		}
+	}
+
+	usc_reset(info);
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	return rc;
+
+}	/* end of mgsl_register_test() */
+
+/* mgsl_irq_test() 	Perform interrupt test of the 16C32.
+ * 
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	true if test passed, otherwise false
+ */
+static bool mgsl_irq_test( struct mgsl_struct *info )
+{
+	unsigned long EndTime;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	usc_reset(info);
+
+	/*
+	 * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition. 
+	 * The ISR sets irq_occurred to true.
+	 */
+
+	info->irq_occurred = false;
+
+	/* Enable INTEN gate for ISA adapter (Port 6, Bit12) */
+	/* Enable INTEN (Port 6, Bit12) */
+	/* This connects the IRQ request signal to the ISA bus */
+	/* on the ISA adapter. This has no effect for the PCI adapter */
+	usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) );
+
+	usc_EnableMasterIrqBit(info);
+	usc_EnableInterrupts(info, IO_PIN);
+	usc_ClearIrqPendingBits(info, IO_PIN);
+	
+	usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED);
+	usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE);
+
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	EndTime=100;
+	while( EndTime-- && !info->irq_occurred ) {
+		msleep_interruptible(10);
+	}
+	
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	usc_reset(info);
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	
+	return info->irq_occurred;
+
+}	/* end of mgsl_irq_test() */
+
+/* mgsl_dma_test()
+ * 
+ * 	Perform a DMA test of the 16C32. A small frame is
+ * 	transmitted via DMA from a transmit buffer to a receive buffer
+ * 	using single buffer DMA mode.
+ * 	
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	true if test passed, otherwise false
+ */
+static bool mgsl_dma_test( struct mgsl_struct *info )
+{
+	unsigned short FifoLevel;
+	unsigned long phys_addr;
+	unsigned int FrameSize;
+	unsigned int i;
+	char *TmpPtr;
+	bool rc = true;
+	unsigned short status=0;
+	unsigned long EndTime;
+	unsigned long flags;
+	MGSL_PARAMS tmp_params;
+
+	/* save current port options */
+	memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
+	/* load default port options */
+	memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
+	
+#define TESTFRAMESIZE 40
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	
+	/* setup 16C32 for SDLC DMA transfer mode */
+
+	usc_reset(info);
+	usc_set_sdlc_mode(info);
+	usc_enable_loopback(info,1);
+	
+	/* Reprogram the RDMR so that the 16C32 does NOT clear the count
+	 * field of the buffer entry after fetching buffer address. This
+	 * way we can detect a DMA failure for a DMA read (which should be
+	 * non-destructive to system memory) before we try and write to
+	 * memory (where a failure could corrupt system memory).
+	 */
+
+	/* Receive DMA mode Register (RDMR)
+	 * 
+	 * <15..14>	11	DMA mode = Linked List Buffer mode
+	 * <13>		1	RSBinA/L = store Rx status Block in List entry
+	 * <12>		0	1 = Clear count of List Entry after fetching
+	 * <11..10>	00	Address mode = Increment
+	 * <9>		1	Terminate Buffer on RxBound
+	 * <8>		0	Bus Width = 16bits
+	 * <7..0>		?	status Bits (write as 0s)
+	 * 
+	 * 1110 0010 0000 0000 = 0xe200
+	 */
+
+	usc_OutDmaReg( info, RDMR, 0xe200 );
+	
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+
+	/* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */
+
+	FrameSize = TESTFRAMESIZE;
+
+	/* setup 1st transmit buffer entry: */
+	/* with frame size and transmit control word */
+
+	info->tx_buffer_list[0].count  = FrameSize;
+	info->tx_buffer_list[0].rcc    = FrameSize;
+	info->tx_buffer_list[0].status = 0x4000;
+
+	/* build a transmit frame in 1st transmit DMA buffer */
+
+	TmpPtr = info->tx_buffer_list[0].virt_addr;
+	for (i = 0; i < FrameSize; i++ )
+		*TmpPtr++ = i;
+
+	/* setup 1st receive buffer entry: */
+	/* clear status, set max receive buffer size */
+
+	info->rx_buffer_list[0].status = 0;
+	info->rx_buffer_list[0].count = FrameSize + 4;
+
+	/* zero out the 1st receive buffer */
+
+	memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 );
+
+	/* Set count field of next buffer entries to prevent */
+	/* 16C32 from using buffers after the 1st one. */
+
+	info->tx_buffer_list[1].count = 0;
+	info->rx_buffer_list[1].count = 0;
+	
+
+	/***************************/
+	/* Program 16C32 receiver. */
+	/***************************/
+	
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+
+	/* setup DMA transfers */
+	usc_RTCmd( info, RTCmd_PurgeRxFifo );
+
+	/* program 16C32 receiver with physical address of 1st DMA buffer entry */
+	phys_addr = info->rx_buffer_list[0].phys_entry;
+	usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr );
+	usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) );
+
+	/* Clear the Rx DMA status bits (read RDMR) and start channel */
+	usc_InDmaReg( info, RDMR );
+	usc_DmaCmd( info, DmaCmd_InitRxChannel );
+
+	/* Enable Receiver (RMR <1..0> = 10) */
+	usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) );
+	
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+
+	/*************************************************************/
+	/* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */
+	/*************************************************************/
+
+	/* Wait 100ms for interrupt. */
+	EndTime = jiffies + msecs_to_jiffies(100);
+
+	for(;;) {
+		if (time_after(jiffies, EndTime)) {
+			rc = false;
+			break;
+		}
+
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+		status = usc_InDmaReg( info, RDMR );
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+		if ( !(status & BIT4) && (status & BIT5) ) {
+			/* INITG (BIT 4) is inactive (no entry read in progress) AND */
+			/* BUSY  (BIT 5) is active (channel still active). */
+			/* This means the buffer entry read has completed. */
+			break;
+		}
+	}
+
+
+	/******************************/
+	/* Program 16C32 transmitter. */
+	/******************************/
+	
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+
+	/* Program the Transmit Character Length Register (TCLR) */
+	/* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
+
+	usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count );
+	usc_RTCmd( info, RTCmd_PurgeTxFifo );
+
+	/* Program the address of the 1st DMA Buffer Entry in linked list */
+
+	phys_addr = info->tx_buffer_list[0].phys_entry;
+	usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr );
+	usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) );
+
+	/* unlatch Tx status bits, and start transmit channel. */
+
+	usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) );
+	usc_DmaCmd( info, DmaCmd_InitTxChannel );
+
+	/* wait for DMA controller to fill transmit FIFO */
+
+	usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
+	
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+
+	/**********************************/
+	/* WAIT FOR TRANSMIT FIFO TO FILL */
+	/**********************************/
+	
+	/* Wait 100ms */
+	EndTime = jiffies + msecs_to_jiffies(100);
+
+	for(;;) {
+		if (time_after(jiffies, EndTime)) {
+			rc = false;
+			break;
+		}
+
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+		FifoLevel = usc_InReg(info, TICR) >> 8;
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+			
+		if ( FifoLevel < 16 )
+			break;
+		else
+			if ( FrameSize < 32 ) {
+				/* This frame is smaller than the entire transmit FIFO */
+				/* so wait for the entire frame to be loaded. */
+				if ( FifoLevel <= (32 - FrameSize) )
+					break;
+			}
+	}
+
+
+	if ( rc )
+	{
+		/* Enable 16C32 transmitter. */
+
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+		
+		/* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */
+		usc_TCmd( info, TCmd_SendFrame );
+		usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) );
+		
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+						
+		/******************************/
+		/* WAIT FOR TRANSMIT COMPLETE */
+		/******************************/
+
+		/* Wait 100ms */
+		EndTime = jiffies + msecs_to_jiffies(100);
+
+		/* While timer not expired wait for transmit complete */
+
+		spin_lock_irqsave(&info->irq_spinlock,flags);
+		status = usc_InReg( info, TCSR );
+		spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+		while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) {
+			if (time_after(jiffies, EndTime)) {
+				rc = false;
+				break;
+			}
+
+			spin_lock_irqsave(&info->irq_spinlock,flags);
+			status = usc_InReg( info, TCSR );
+			spin_unlock_irqrestore(&info->irq_spinlock,flags);
+		}
+	}
+
+
+	if ( rc ){
+		/* CHECK FOR TRANSMIT ERRORS */
+		if ( status & (BIT5 + BIT1) ) 
+			rc = false;
+	}
+
+	if ( rc ) {
+		/* WAIT FOR RECEIVE COMPLETE */
+
+		/* Wait 100ms */
+		EndTime = jiffies + msecs_to_jiffies(100);
+
+		/* Wait for 16C32 to write receive status to buffer entry. */
+		status=info->rx_buffer_list[0].status;
+		while ( status == 0 ) {
+			if (time_after(jiffies, EndTime)) {
+				rc = false;
+				break;
+			}
+			status=info->rx_buffer_list[0].status;
+		}
+	}
+
+
+	if ( rc ) {
+		/* CHECK FOR RECEIVE ERRORS */
+		status = info->rx_buffer_list[0].status;
+
+		if ( status & (BIT8 + BIT3 + BIT1) ) {
+			/* receive error has occurred */
+			rc = false;
+		} else {
+			if ( memcmp( info->tx_buffer_list[0].virt_addr ,
+				info->rx_buffer_list[0].virt_addr, FrameSize ) ){
+				rc = false;
+			}
+		}
+	}
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	usc_reset( info );
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	/* restore current port options */
+	memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
+	
+	return rc;
+
+}	/* end of mgsl_dma_test() */
+
+/* mgsl_adapter_test()
+ * 
+ * 	Perform the register, IRQ, and DMA tests for the 16C32.
+ * 	
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	0 if success, otherwise -ENODEV
+ */
+static int mgsl_adapter_test( struct mgsl_struct *info )
+{
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):Testing device %s\n",
+			__FILE__,__LINE__,info->device_name );
+			
+	if ( !mgsl_register_test( info ) ) {
+		info->init_error = DiagStatus_AddressFailure;
+		printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
+			__FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
+		return -ENODEV;
+	}
+
+	if ( !mgsl_irq_test( info ) ) {
+		info->init_error = DiagStatus_IrqFailure;
+		printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
+			__FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
+		return -ENODEV;
+	}
+
+	if ( !mgsl_dma_test( info ) ) {
+		info->init_error = DiagStatus_DmaFailure;
+		printk( "%s(%d):DMA test failure for device %s DMA=%d\n",
+			__FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) );
+		return -ENODEV;
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):device %s passed diagnostics\n",
+			__FILE__,__LINE__,info->device_name );
+			
+	return 0;
+
+}	/* end of mgsl_adapter_test() */
+
+/* mgsl_memory_test()
+ * 
+ * 	Test the shared memory on a PCI adapter.
+ * 
+ * Arguments:		info	pointer to device instance data
+ * Return Value:	true if test passed, otherwise false
+ */
+static bool mgsl_memory_test( struct mgsl_struct *info )
+{
+	static unsigned long BitPatterns[] =
+		{ 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
+	unsigned long Patterncount = ARRAY_SIZE(BitPatterns);
+	unsigned long i;
+	unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long);
+	unsigned long * TestAddr;
+
+	if ( info->bus_type != MGSL_BUS_TYPE_PCI )
+		return true;
+
+	TestAddr = (unsigned long *)info->memory_base;
+
+	/* Test data lines with test pattern at one location. */
+
+	for ( i = 0 ; i < Patterncount ; i++ ) {
+		*TestAddr = BitPatterns[i];
+		if ( *TestAddr != BitPatterns[i] )
+			return false;
+	}
+
+	/* Test address lines with incrementing pattern over */
+	/* entire address range. */
+
+	for ( i = 0 ; i < TestLimit ; i++ ) {
+		*TestAddr = i * 4;
+		TestAddr++;
+	}
+
+	TestAddr = (unsigned long *)info->memory_base;
+
+	for ( i = 0 ; i < TestLimit ; i++ ) {
+		if ( *TestAddr != i * 4 )
+			return false;
+		TestAddr++;
+	}
+
+	memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE );
+
+	return true;
+
+}	/* End Of mgsl_memory_test() */
+
+
+/* mgsl_load_pci_memory()
+ * 
+ * 	Load a large block of data into the PCI shared memory.
+ * 	Use this instead of memcpy() or memmove() to move data
+ * 	into the PCI shared memory.
+ * 
+ * Notes:
+ * 
+ * 	This function prevents the PCI9050 interface chip from hogging
+ * 	the adapter local bus, which can starve the 16C32 by preventing
+ * 	16C32 bus master cycles.
+ * 
+ * 	The PCI9050 documentation says that the 9050 will always release
+ * 	control of the local bus after completing the current read
+ * 	or write operation.
+ * 
+ * 	It appears that as long as the PCI9050 write FIFO is full, the
+ * 	PCI9050 treats all of the writes as a single burst transaction
+ * 	and will not release the bus. This causes DMA latency problems
+ * 	at high speeds when copying large data blocks to the shared
+ * 	memory.
+ * 
+ * 	This function in effect, breaks the a large shared memory write
+ * 	into multiple transations by interleaving a shared memory read
+ * 	which will flush the write FIFO and 'complete' the write
+ * 	transation. This allows any pending DMA request to gain control
+ * 	of the local bus in a timely fasion.
+ * 
+ * Arguments:
+ * 
+ * 	TargetPtr	pointer to target address in PCI shared memory
+ * 	SourcePtr	pointer to source buffer for data
+ * 	count		count in bytes of data to copy
+ *
+ * Return Value:	None
+ */
+static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr,
+	unsigned short count )
+{
+	/* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */
+#define PCI_LOAD_INTERVAL 64
+
+	unsigned short Intervalcount = count / PCI_LOAD_INTERVAL;
+	unsigned short Index;
+	unsigned long Dummy;
+
+	for ( Index = 0 ; Index < Intervalcount ; Index++ )
+	{
+		memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL);
+		Dummy = *((volatile unsigned long *)TargetPtr);
+		TargetPtr += PCI_LOAD_INTERVAL;
+		SourcePtr += PCI_LOAD_INTERVAL;
+	}
+
+	memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL );
+
+}	/* End Of mgsl_load_pci_memory() */
+
+static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit)
+{
+	int i;
+	int linecount;
+	if (xmit)
+		printk("%s tx data:\n",info->device_name);
+	else
+		printk("%s rx data:\n",info->device_name);
+		
+	while(count) {
+		if (count > 16)
+			linecount = 16;
+		else
+			linecount = count;
+			
+		for(i=0;i<linecount;i++)
+			printk("%02X ",(unsigned char)data[i]);
+		for(;i<17;i++)
+			printk("   ");
+		for(i=0;i<linecount;i++) {
+			if (data[i]>=040 && data[i]<=0176)
+				printk("%c",data[i]);
+			else
+				printk(".");
+		}
+		printk("\n");
+		
+		data  += linecount;
+		count -= linecount;
+	}
+}	/* end of mgsl_trace_block() */
+
+/* mgsl_tx_timeout()
+ * 
+ * 	called when HDLC frame times out
+ * 	update stats and do tx completion processing
+ * 	
+ * Arguments:	context		pointer to device instance data
+ * Return Value:	None
+ */
+static void mgsl_tx_timeout(unsigned long context)
+{
+	struct mgsl_struct *info = (struct mgsl_struct*)context;
+	unsigned long flags;
+	
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):mgsl_tx_timeout(%s)\n",
+			__FILE__,__LINE__,info->device_name);
+	if(info->tx_active &&
+	   (info->params.mode == MGSL_MODE_HDLC ||
+	    info->params.mode == MGSL_MODE_RAW) ) {
+		info->icount.txtimeout++;
+	}
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	info->tx_active = false;
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+	if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
+		usc_loopmode_cancel_transmit( info );
+
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	
+#if SYNCLINK_GENERIC_HDLC
+	if (info->netcount)
+		hdlcdev_tx_done(info);
+	else
+#endif
+		mgsl_bh_transmit(info);
+	
+}	/* end of mgsl_tx_timeout() */
+
+/* signal that there are no more frames to send, so that
+ * line is 'released' by echoing RxD to TxD when current
+ * transmission is complete (or immediately if no tx in progress).
+ */
+static int mgsl_loopmode_send_done( struct mgsl_struct * info )
+{
+	unsigned long flags;
+	
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
+		if (info->tx_active)
+			info->loopmode_send_done_requested = true;
+		else
+			usc_loopmode_send_done(info);
+	}
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	return 0;
+}
+
+/* release the line by echoing RxD to TxD
+ * upon completion of a transmit frame
+ */
+static void usc_loopmode_send_done( struct mgsl_struct * info )
+{
+ 	info->loopmode_send_done_requested = false;
+ 	/* clear CMR:13 to 0 to start echoing RxData to TxData */
+ 	info->cmr_value &= ~BIT13;			  
+ 	usc_OutReg(info, CMR, info->cmr_value);
+}
+
+/* abort a transmit in progress while in HDLC LoopMode
+ */
+static void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
+{
+ 	/* reset tx dma channel and purge TxFifo */
+ 	usc_RTCmd( info, RTCmd_PurgeTxFifo );
+ 	usc_DmaCmd( info, DmaCmd_ResetTxChannel );
+  	usc_loopmode_send_done( info );
+}
+
+/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled
+ * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort)
+ * we must clear CMR:13 to begin repeating TxData to RxData
+ */
+static void usc_loopmode_insert_request( struct mgsl_struct * info )
+{
+ 	info->loopmode_insert_requested = true;
+ 
+ 	/* enable RxAbort irq. On next RxAbort, clear CMR:13 to
+ 	 * begin repeating TxData on RxData (complete insertion)
+	 */
+ 	usc_OutReg( info, RICR, 
+		(usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
+		
+	/* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
+	info->cmr_value |= BIT13;
+ 	usc_OutReg(info, CMR, info->cmr_value);
+}
+
+/* return 1 if station is inserted into the loop, otherwise 0
+ */
+static int usc_loopmode_active( struct mgsl_struct * info)
+{
+ 	return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ;
+}
+
+#if SYNCLINK_GENERIC_HDLC
+
+/**
+ * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
+ * set encoding and frame check sequence (FCS) options
+ *
+ * dev       pointer to network device structure
+ * encoding  serial encoding setting
+ * parity    FCS setting
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
+			  unsigned short parity)
+{
+	struct mgsl_struct *info = dev_to_port(dev);
+	unsigned char  new_encoding;
+	unsigned short new_crctype;
+
+	/* return error if TTY interface open */
+	if (info->port.count)
+		return -EBUSY;
+
+	switch (encoding)
+	{
+	case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
+	case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
+	case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
+	case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
+	case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
+	default: return -EINVAL;
+	}
+
+	switch (parity)
+	{
+	case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
+	case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
+	case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
+	default: return -EINVAL;
+	}
+
+	info->params.encoding = new_encoding;
+	info->params.crc_type = new_crctype;
+
+	/* if network interface up, reprogram hardware */
+	if (info->netcount)
+		mgsl_program_hw(info);
+
+	return 0;
+}
+
+/**
+ * called by generic HDLC layer to send frame
+ *
+ * skb  socket buffer containing HDLC frame
+ * dev  pointer to network device structure
+ */
+static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
+				      struct net_device *dev)
+{
+	struct mgsl_struct *info = dev_to_port(dev);
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
+
+	/* stop sending until this frame completes */
+	netif_stop_queue(dev);
+
+	/* copy data to device buffers */
+	info->xmit_cnt = skb->len;
+	mgsl_load_tx_dma_buffer(info, skb->data, skb->len);
+
+	/* update network statistics */
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
+
+	/* done with socket buffer, so free it */
+	dev_kfree_skb(skb);
+
+	/* save start time for transmit timeout detection */
+	dev->trans_start = jiffies;
+
+	/* start hardware transmitter if necessary */
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	if (!info->tx_active)
+	 	usc_start_transmitter(info);
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * called by network layer when interface enabled
+ * claim resources and initialize hardware
+ *
+ * dev  pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_open(struct net_device *dev)
+{
+	struct mgsl_struct *info = dev_to_port(dev);
+	int rc;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
+
+	/* generic HDLC layer open processing */
+	if ((rc = hdlc_open(dev)))
+		return rc;
+
+	/* arbitrate between network and tty opens */
+	spin_lock_irqsave(&info->netlock, flags);
+	if (info->port.count != 0 || info->netcount != 0) {
+		printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
+		spin_unlock_irqrestore(&info->netlock, flags);
+		return -EBUSY;
+	}
+	info->netcount=1;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	/* claim resources and init adapter */
+	if ((rc = startup(info)) != 0) {
+		spin_lock_irqsave(&info->netlock, flags);
+		info->netcount=0;
+		spin_unlock_irqrestore(&info->netlock, flags);
+		return rc;
+	}
+
+	/* assert DTR and RTS, apply hardware settings */
+	info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	mgsl_program_hw(info);
+
+	/* enable network layer transmit */
+	dev->trans_start = jiffies;
+	netif_start_queue(dev);
+
+	/* inform generic HDLC layer of current DCD status */
+	spin_lock_irqsave(&info->irq_spinlock, flags);
+	usc_get_serial_signals(info);
+	spin_unlock_irqrestore(&info->irq_spinlock, flags);
+	if (info->serial_signals & SerialSignal_DCD)
+		netif_carrier_on(dev);
+	else
+		netif_carrier_off(dev);
+	return 0;
+}
+
+/**
+ * called by network layer when interface is disabled
+ * shutdown hardware and release resources
+ *
+ * dev  pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_close(struct net_device *dev)
+{
+	struct mgsl_struct *info = dev_to_port(dev);
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
+
+	netif_stop_queue(dev);
+
+	/* shutdown adapter and release resources */
+	shutdown(info);
+
+	hdlc_close(dev);
+
+	spin_lock_irqsave(&info->netlock, flags);
+	info->netcount=0;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	return 0;
+}
+
+/**
+ * called by network layer to process IOCTL call to network device
+ *
+ * dev  pointer to network device structure
+ * ifr  pointer to network interface request structure
+ * cmd  IOCTL command code
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	const size_t size = sizeof(sync_serial_settings);
+	sync_serial_settings new_line;
+	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+	struct mgsl_struct *info = dev_to_port(dev);
+	unsigned int flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
+
+	/* return error if TTY interface open */
+	if (info->port.count)
+		return -EBUSY;
+
+	if (cmd != SIOCWANDEV)
+		return hdlc_ioctl(dev, ifr, cmd);
+
+	switch(ifr->ifr_settings.type) {
+	case IF_GET_IFACE: /* return current sync_serial_settings */
+
+		ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+		if (ifr->ifr_settings.size < size) {
+			ifr->ifr_settings.size = size; /* data size wanted */
+			return -ENOBUFS;
+		}
+
+		flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
+
+		switch (flags){
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
+		case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
+		default: new_line.clock_type = CLOCK_DEFAULT;
+		}
+
+		new_line.clock_rate = info->params.clock_speed;
+		new_line.loopback   = info->params.loopback ? 1:0;
+
+		if (copy_to_user(line, &new_line, size))
+			return -EFAULT;
+		return 0;
+
+	case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
+
+		if(!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&new_line, line, size))
+			return -EFAULT;
+
+		switch (new_line.clock_type)
+		{
+		case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
+		case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
+		case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
+		case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
+		case CLOCK_DEFAULT:  flags = info->params.flags &
+					     (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
+		default: return -EINVAL;
+		}
+
+		if (new_line.loopback != 0 && new_line.loopback != 1)
+			return -EINVAL;
+
+		info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
+		info->params.flags |= flags;
+
+		info->params.loopback = new_line.loopback;
+
+		if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
+			info->params.clock_speed = new_line.clock_rate;
+		else
+			info->params.clock_speed = 0;
+
+		/* if network interface up, reprogram hardware */
+		if (info->netcount)
+			mgsl_program_hw(info);
+		return 0;
+
+	default:
+		return hdlc_ioctl(dev, ifr, cmd);
+	}
+}
+
+/**
+ * called by network layer when transmit timeout is detected
+ *
+ * dev  pointer to network device structure
+ */
+static void hdlcdev_tx_timeout(struct net_device *dev)
+{
+	struct mgsl_struct *info = dev_to_port(dev);
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("hdlcdev_tx_timeout(%s)\n",dev->name);
+
+	dev->stats.tx_errors++;
+	dev->stats.tx_aborted_errors++;
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	usc_stop_transmitter(info);
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	netif_wake_queue(dev);
+}
+
+/**
+ * called by device driver when transmit completes
+ * reenable network layer transmit if stopped
+ *
+ * info  pointer to device instance information
+ */
+static void hdlcdev_tx_done(struct mgsl_struct *info)
+{
+	if (netif_queue_stopped(info->netdev))
+		netif_wake_queue(info->netdev);
+}
+
+/**
+ * called by device driver when frame received
+ * pass frame to network layer
+ *
+ * info  pointer to device instance information
+ * buf   pointer to buffer contianing frame data
+ * size  count of data bytes in buf
+ */
+static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size)
+{
+	struct sk_buff *skb = dev_alloc_skb(size);
+	struct net_device *dev = info->netdev;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("hdlcdev_rx(%s)\n", dev->name);
+
+	if (skb == NULL) {
+		printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
+		       dev->name);
+		dev->stats.rx_dropped++;
+		return;
+	}
+
+	memcpy(skb_put(skb, size), buf, size);
+
+	skb->protocol = hdlc_type_trans(skb, dev);
+
+	dev->stats.rx_packets++;
+	dev->stats.rx_bytes += size;
+
+	netif_rx(skb);
+}
+
+static const struct net_device_ops hdlcdev_ops = {
+	.ndo_open       = hdlcdev_open,
+	.ndo_stop       = hdlcdev_close,
+	.ndo_change_mtu = hdlc_change_mtu,
+	.ndo_start_xmit = hdlc_start_xmit,
+	.ndo_do_ioctl   = hdlcdev_ioctl,
+	.ndo_tx_timeout = hdlcdev_tx_timeout,
+};
+
+/**
+ * called by device driver when adding device instance
+ * do generic HDLC initialization
+ *
+ * info  pointer to device instance information
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_init(struct mgsl_struct *info)
+{
+	int rc;
+	struct net_device *dev;
+	hdlc_device *hdlc;
+
+	/* allocate and initialize network and HDLC layer objects */
+
+	if (!(dev = alloc_hdlcdev(info))) {
+		printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
+		return -ENOMEM;
+	}
+
+	/* for network layer reporting purposes only */
+	dev->base_addr = info->io_base;
+	dev->irq       = info->irq_level;
+	dev->dma       = info->dma_level;
+
+	/* network layer callbacks and settings */
+	dev->netdev_ops     = &hdlcdev_ops;
+	dev->watchdog_timeo = 10 * HZ;
+	dev->tx_queue_len   = 50;
+
+	/* generic HDLC layer callbacks and settings */
+	hdlc         = dev_to_hdlc(dev);
+	hdlc->attach = hdlcdev_attach;
+	hdlc->xmit   = hdlcdev_xmit;
+
+	/* register objects with HDLC layer */
+	if ((rc = register_hdlc_device(dev))) {
+		printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
+		free_netdev(dev);
+		return rc;
+	}
+
+	info->netdev = dev;
+	return 0;
+}
+
+/**
+ * called by device driver when removing device instance
+ * do generic HDLC cleanup
+ *
+ * info  pointer to device instance information
+ */
+static void hdlcdev_exit(struct mgsl_struct *info)
+{
+	unregister_hdlc_device(info->netdev);
+	free_netdev(info->netdev);
+	info->netdev = NULL;
+}
+
+#endif /* CONFIG_HDLC */
+
+
+static int __devinit synclink_init_one (struct pci_dev *dev,
+					const struct pci_device_id *ent)
+{
+	struct mgsl_struct *info;
+
+	if (pci_enable_device(dev)) {
+		printk("error enabling pci device %p\n", dev);
+		return -EIO;
+	}
+
+	if (!(info = mgsl_allocate_device())) {
+		printk("can't allocate device instance data.\n");
+		return -EIO;
+	}
+
+        /* Copy user configuration info to device instance data */
+		
+	info->io_base = pci_resource_start(dev, 2);
+	info->irq_level = dev->irq;
+	info->phys_memory_base = pci_resource_start(dev, 3);
+				
+        /* Because veremap only works on page boundaries we must map
+	 * a larger area than is actually implemented for the LCR
+	 * memory range. We map a full page starting at the page boundary.
+	 */
+	info->phys_lcr_base = pci_resource_start(dev, 0);
+	info->lcr_offset    = info->phys_lcr_base & (PAGE_SIZE-1);
+	info->phys_lcr_base &= ~(PAGE_SIZE-1);
+				
+	info->bus_type = MGSL_BUS_TYPE_PCI;
+	info->io_addr_size = 8;
+	info->irq_flags = IRQF_SHARED;
+
+	if (dev->device == 0x0210) {
+		/* Version 1 PCI9030 based universal PCI adapter */
+		info->misc_ctrl_value = 0x007c4080;
+		info->hw_version = 1;
+	} else {
+		/* Version 0 PCI9050 based 5V PCI adapter
+		 * A PCI9050 bug prevents reading LCR registers if 
+		 * LCR base address bit 7 is set. Maintain shadow
+		 * value so we can write to LCR misc control reg.
+		 */
+		info->misc_ctrl_value = 0x087e4546;
+		info->hw_version = 0;
+	}
+				
+	mgsl_add_device(info);
+
+	return 0;
+}
+
+static void __devexit synclink_remove_one (struct pci_dev *dev)
+{
+}
+
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
new file mode 100644
index 000000000000..a35dd549a008
--- /dev/null
+++ b/drivers/tty/synclink_gt.c
@@ -0,0 +1,5161 @@
+/*
+ * Device driver for Microgate SyncLink GT serial adapters.
+ *
+ * written by Paul Fulghum for Microgate Corporation
+ * paulkf@microgate.com
+ *
+ * Microgate and SyncLink are trademarks of Microgate Corporation
+ *
+ * This code is released under the GNU General Public License (GPL)
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * DEBUG OUTPUT DEFINITIONS
+ *
+ * uncomment lines below to enable specific types of debug output
+ *
+ * DBGINFO   information - most verbose output
+ * DBGERR    serious errors
+ * DBGBH     bottom half service routine debugging
+ * DBGISR    interrupt service routine debugging
+ * DBGDATA   output receive and transmit data
+ * DBGTBUF   output transmit DMA buffers and registers
+ * DBGRBUF   output receive DMA buffers and registers
+ */
+
+#define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
+#define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
+#define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
+#define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
+#define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
+/*#define DBGTBUF(info) dump_tbufs(info)*/
+/*#define DBGRBUF(info) dump_rbufs(info)*/
+
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ioctl.h>
+#include <linux/termios.h>
+#include <linux/bitops.h>
+#include <linux/workqueue.h>
+#include <linux/hdlc.h>
+#include <linux/synclink.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/types.h>
+#include <asm/uaccess.h>
+
+#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
+#define SYNCLINK_GENERIC_HDLC 1
+#else
+#define SYNCLINK_GENERIC_HDLC 0
+#endif
+
+/*
+ * module identification
+ */
+static char *driver_name     = "SyncLink GT";
+static char *tty_driver_name = "synclink_gt";
+static char *tty_dev_prefix  = "ttySLG";
+MODULE_LICENSE("GPL");
+#define MGSL_MAGIC 0x5401
+#define MAX_DEVICES 32
+
+static struct pci_device_id pci_table[] = {
+	{PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{0,}, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, pci_table);
+
+static int  init_one(struct pci_dev *dev,const struct pci_device_id *ent);
+static void remove_one(struct pci_dev *dev);
+static struct pci_driver pci_driver = {
+	.name		= "synclink_gt",
+	.id_table	= pci_table,
+	.probe		= init_one,
+	.remove		= __devexit_p(remove_one),
+};
+
+static bool pci_registered;
+
+/*
+ * module configuration and status
+ */
+static struct slgt_info *slgt_device_list;
+static int slgt_device_count;
+
+static int ttymajor;
+static int debug_level;
+static int maxframe[MAX_DEVICES];
+
+module_param(ttymajor, int, 0);
+module_param(debug_level, int, 0);
+module_param_array(maxframe, int, NULL, 0);
+
+MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
+MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
+MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
+
+/*
+ * tty support and callbacks
+ */
+static struct tty_driver *serial_driver;
+
+static int  open(struct tty_struct *tty, struct file * filp);
+static void close(struct tty_struct *tty, struct file * filp);
+static void hangup(struct tty_struct *tty);
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
+
+static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
+static int put_char(struct tty_struct *tty, unsigned char ch);
+static void send_xchar(struct tty_struct *tty, char ch);
+static void wait_until_sent(struct tty_struct *tty, int timeout);
+static int  write_room(struct tty_struct *tty);
+static void flush_chars(struct tty_struct *tty);
+static void flush_buffer(struct tty_struct *tty);
+static void tx_hold(struct tty_struct *tty);
+static void tx_release(struct tty_struct *tty);
+
+static int  ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
+static int  chars_in_buffer(struct tty_struct *tty);
+static void throttle(struct tty_struct * tty);
+static void unthrottle(struct tty_struct * tty);
+static int set_break(struct tty_struct *tty, int break_state);
+
+/*
+ * generic HDLC support and callbacks
+ */
+#if SYNCLINK_GENERIC_HDLC
+#define dev_to_port(D) (dev_to_hdlc(D)->priv)
+static void hdlcdev_tx_done(struct slgt_info *info);
+static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
+static int  hdlcdev_init(struct slgt_info *info);
+static void hdlcdev_exit(struct slgt_info *info);
+#endif
+
+
+/*
+ * device specific structures, macros and functions
+ */
+
+#define SLGT_MAX_PORTS 4
+#define SLGT_REG_SIZE  256
+
+/*
+ * conditional wait facility
+ */
+struct cond_wait {
+	struct cond_wait *next;
+	wait_queue_head_t q;
+	wait_queue_t wait;
+	unsigned int data;
+};
+static void init_cond_wait(struct cond_wait *w, unsigned int data);
+static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
+static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
+static void flush_cond_wait(struct cond_wait **head);
+
+/*
+ * DMA buffer descriptor and access macros
+ */
+struct slgt_desc
+{
+	__le16 count;
+	__le16 status;
+	__le32 pbuf;  /* physical address of data buffer */
+	__le32 next;  /* physical address of next descriptor */
+
+	/* driver book keeping */
+	char *buf;          /* virtual  address of data buffer */
+    	unsigned int pdesc; /* physical address of this descriptor */
+	dma_addr_t buf_dma_addr;
+	unsigned short buf_count;
+};
+
+#define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
+#define set_desc_next(a,b) (a).next   = cpu_to_le32((unsigned int)(b))
+#define set_desc_count(a,b)(a).count  = cpu_to_le16((unsigned short)(b))
+#define set_desc_eof(a,b)  (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
+#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b))
+#define desc_count(a)      (le16_to_cpu((a).count))
+#define desc_status(a)     (le16_to_cpu((a).status))
+#define desc_complete(a)   (le16_to_cpu((a).status) & BIT15)
+#define desc_eof(a)        (le16_to_cpu((a).status) & BIT2)
+#define desc_crc_error(a)  (le16_to_cpu((a).status) & BIT1)
+#define desc_abort(a)      (le16_to_cpu((a).status) & BIT0)
+#define desc_residue(a)    ((le16_to_cpu((a).status) & 0x38) >> 3)
+
+struct _input_signal_events {
+	int ri_up;
+	int ri_down;
+	int dsr_up;
+	int dsr_down;
+	int dcd_up;
+	int dcd_down;
+	int cts_up;
+	int cts_down;
+};
+
+/*
+ * device instance data structure
+ */
+struct slgt_info {
+	void *if_ptr;		/* General purpose pointer (used by SPPP) */
+	struct tty_port port;
+
+	struct slgt_info *next_device;	/* device list link */
+
+	int magic;
+
+	char device_name[25];
+	struct pci_dev *pdev;
+
+	int port_count;  /* count of ports on adapter */
+	int adapter_num; /* adapter instance number */
+	int port_num;    /* port instance number */
+
+	/* array of pointers to port contexts on this adapter */
+	struct slgt_info *port_array[SLGT_MAX_PORTS];
+
+	int			line;		/* tty line instance number */
+
+	struct mgsl_icount	icount;
+
+	int			timeout;
+	int			x_char;		/* xon/xoff character */
+	unsigned int		read_status_mask;
+	unsigned int 		ignore_status_mask;
+
+	wait_queue_head_t	status_event_wait_q;
+	wait_queue_head_t	event_wait_q;
+	struct timer_list	tx_timer;
+	struct timer_list	rx_timer;
+
+	unsigned int            gpio_present;
+	struct cond_wait        *gpio_wait_q;
+
+	spinlock_t lock;	/* spinlock for synchronizing with ISR */
+
+	struct work_struct task;
+	u32 pending_bh;
+	bool bh_requested;
+	bool bh_running;
+
+	int isr_overflow;
+	bool irq_requested;	/* true if IRQ requested */
+	bool irq_occurred;	/* for diagnostics use */
+
+	/* device configuration */
+
+	unsigned int bus_type;
+	unsigned int irq_level;
+	unsigned long irq_flags;
+
+	unsigned char __iomem * reg_addr;  /* memory mapped registers address */
+	u32 phys_reg_addr;
+	bool reg_addr_requested;
+
+	MGSL_PARAMS params;       /* communications parameters */
+	u32 idle_mode;
+	u32 max_frame_size;       /* as set by device config */
+
+	unsigned int rbuf_fill_level;
+	unsigned int rx_pio;
+	unsigned int if_mode;
+	unsigned int base_clock;
+	unsigned int xsync;
+	unsigned int xctrl;
+
+	/* device status */
+
+	bool rx_enabled;
+	bool rx_restart;
+
+	bool tx_enabled;
+	bool tx_active;
+
+	unsigned char signals;    /* serial signal states */
+	int init_error;  /* initialization error */
+
+	unsigned char *tx_buf;
+	int tx_count;
+
+	char flag_buf[MAX_ASYNC_BUFFER_SIZE];
+	char char_buf[MAX_ASYNC_BUFFER_SIZE];
+	bool drop_rts_on_tx_done;
+	struct	_input_signal_events	input_signal_events;
+
+	int dcd_chkcount;	/* check counts to prevent */
+	int cts_chkcount;	/* too many IRQs if a signal */
+	int dsr_chkcount;	/* is floating */
+	int ri_chkcount;
+
+	char *bufs;		/* virtual address of DMA buffer lists */
+	dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
+
+	unsigned int rbuf_count;
+	struct slgt_desc *rbufs;
+	unsigned int rbuf_current;
+	unsigned int rbuf_index;
+	unsigned int rbuf_fill_index;
+	unsigned short rbuf_fill_count;
+
+	unsigned int tbuf_count;
+	struct slgt_desc *tbufs;
+	unsigned int tbuf_current;
+	unsigned int tbuf_start;
+
+	unsigned char *tmp_rbuf;
+	unsigned int tmp_rbuf_count;
+
+	/* SPPP/Cisco HDLC device parts */
+
+	int netcount;
+	spinlock_t netlock;
+#if SYNCLINK_GENERIC_HDLC
+	struct net_device *netdev;
+#endif
+
+};
+
+static MGSL_PARAMS default_params = {
+	.mode            = MGSL_MODE_HDLC,
+	.loopback        = 0,
+	.flags           = HDLC_FLAG_UNDERRUN_ABORT15,
+	.encoding        = HDLC_ENCODING_NRZI_SPACE,
+	.clock_speed     = 0,
+	.addr_filter     = 0xff,
+	.crc_type        = HDLC_CRC_16_CCITT,
+	.preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
+	.preamble        = HDLC_PREAMBLE_PATTERN_NONE,
+	.data_rate       = 9600,
+	.data_bits       = 8,
+	.stop_bits       = 1,
+	.parity          = ASYNC_PARITY_NONE
+};
+
+
+#define BH_RECEIVE  1
+#define BH_TRANSMIT 2
+#define BH_STATUS   4
+#define IO_PIN_SHUTDOWN_LIMIT 100
+
+#define DMABUFSIZE 256
+#define DESC_LIST_SIZE 4096
+
+#define MASK_PARITY  BIT1
+#define MASK_FRAMING BIT0
+#define MASK_BREAK   BIT14
+#define MASK_OVERRUN BIT4
+
+#define GSR   0x00 /* global status */
+#define JCR   0x04 /* JTAG control */
+#define IODR  0x08 /* GPIO direction */
+#define IOER  0x0c /* GPIO interrupt enable */
+#define IOVR  0x10 /* GPIO value */
+#define IOSR  0x14 /* GPIO interrupt status */
+#define TDR   0x80 /* tx data */
+#define RDR   0x80 /* rx data */
+#define TCR   0x82 /* tx control */
+#define TIR   0x84 /* tx idle */
+#define TPR   0x85 /* tx preamble */
+#define RCR   0x86 /* rx control */
+#define VCR   0x88 /* V.24 control */
+#define CCR   0x89 /* clock control */
+#define BDR   0x8a /* baud divisor */
+#define SCR   0x8c /* serial control */
+#define SSR   0x8e /* serial status */
+#define RDCSR 0x90 /* rx DMA control/status */
+#define TDCSR 0x94 /* tx DMA control/status */
+#define RDDAR 0x98 /* rx DMA descriptor address */
+#define TDDAR 0x9c /* tx DMA descriptor address */
+#define XSR   0x40 /* extended sync pattern */
+#define XCR   0x44 /* extended control */
+
+#define RXIDLE      BIT14
+#define RXBREAK     BIT14
+#define IRQ_TXDATA  BIT13
+#define IRQ_TXIDLE  BIT12
+#define IRQ_TXUNDER BIT11 /* HDLC */
+#define IRQ_RXDATA  BIT10
+#define IRQ_RXIDLE  BIT9  /* HDLC */
+#define IRQ_RXBREAK BIT9  /* async */
+#define IRQ_RXOVER  BIT8
+#define IRQ_DSR     BIT7
+#define IRQ_CTS     BIT6
+#define IRQ_DCD     BIT5
+#define IRQ_RI      BIT4
+#define IRQ_ALL     0x3ff0
+#define IRQ_MASTER  BIT0
+
+#define slgt_irq_on(info, mask) \
+	wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
+#define slgt_irq_off(info, mask) \
+	wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
+
+static __u8  rd_reg8(struct slgt_info *info, unsigned int addr);
+static void  wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
+static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
+static void  wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
+static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
+static void  wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
+
+static void  msc_set_vcr(struct slgt_info *info);
+
+static int  startup(struct slgt_info *info);
+static int  block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
+static void shutdown(struct slgt_info *info);
+static void program_hw(struct slgt_info *info);
+static void change_params(struct slgt_info *info);
+
+static int  register_test(struct slgt_info *info);
+static int  irq_test(struct slgt_info *info);
+static int  loopback_test(struct slgt_info *info);
+static int  adapter_test(struct slgt_info *info);
+
+static void reset_adapter(struct slgt_info *info);
+static void reset_port(struct slgt_info *info);
+static void async_mode(struct slgt_info *info);
+static void sync_mode(struct slgt_info *info);
+
+static void rx_stop(struct slgt_info *info);
+static void rx_start(struct slgt_info *info);
+static void reset_rbufs(struct slgt_info *info);
+static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
+static void rdma_reset(struct slgt_info *info);
+static bool rx_get_frame(struct slgt_info *info);
+static bool rx_get_buf(struct slgt_info *info);
+
+static void tx_start(struct slgt_info *info);
+static void tx_stop(struct slgt_info *info);
+static void tx_set_idle(struct slgt_info *info);
+static unsigned int free_tbuf_count(struct slgt_info *info);
+static unsigned int tbuf_bytes(struct slgt_info *info);
+static void reset_tbufs(struct slgt_info *info);
+static void tdma_reset(struct slgt_info *info);
+static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count);
+
+static void get_signals(struct slgt_info *info);
+static void set_signals(struct slgt_info *info);
+static void enable_loopback(struct slgt_info *info);
+static void set_rate(struct slgt_info *info, u32 data_rate);
+
+static int  bh_action(struct slgt_info *info);
+static void bh_handler(struct work_struct *work);
+static void bh_transmit(struct slgt_info *info);
+static void isr_serial(struct slgt_info *info);
+static void isr_rdma(struct slgt_info *info);
+static void isr_txeom(struct slgt_info *info, unsigned short status);
+static void isr_tdma(struct slgt_info *info);
+
+static int  alloc_dma_bufs(struct slgt_info *info);
+static void free_dma_bufs(struct slgt_info *info);
+static int  alloc_desc(struct slgt_info *info);
+static void free_desc(struct slgt_info *info);
+static int  alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
+static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
+
+static int  alloc_tmp_rbuf(struct slgt_info *info);
+static void free_tmp_rbuf(struct slgt_info *info);
+
+static void tx_timeout(unsigned long context);
+static void rx_timeout(unsigned long context);
+
+/*
+ * ioctl handlers
+ */
+static int  get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
+static int  get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
+static int  set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
+static int  get_txidle(struct slgt_info *info, int __user *idle_mode);
+static int  set_txidle(struct slgt_info *info, int idle_mode);
+static int  tx_enable(struct slgt_info *info, int enable);
+static int  tx_abort(struct slgt_info *info);
+static int  rx_enable(struct slgt_info *info, int enable);
+static int  modem_input_wait(struct slgt_info *info,int arg);
+static int  wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
+static int  tiocmget(struct tty_struct *tty);
+static int  tiocmset(struct tty_struct *tty,
+				unsigned int set, unsigned int clear);
+static int set_break(struct tty_struct *tty, int break_state);
+static int  get_interface(struct slgt_info *info, int __user *if_mode);
+static int  set_interface(struct slgt_info *info, int if_mode);
+static int  set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
+static int  get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
+static int  wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
+static int  get_xsync(struct slgt_info *info, int __user *if_mode);
+static int  set_xsync(struct slgt_info *info, int if_mode);
+static int  get_xctrl(struct slgt_info *info, int __user *if_mode);
+static int  set_xctrl(struct slgt_info *info, int if_mode);
+
+/*
+ * driver functions
+ */
+static void add_device(struct slgt_info *info);
+static void device_init(int adapter_num, struct pci_dev *pdev);
+static int  claim_resources(struct slgt_info *info);
+static void release_resources(struct slgt_info *info);
+
+/*
+ * DEBUG OUTPUT CODE
+ */
+#ifndef DBGINFO
+#define DBGINFO(fmt)
+#endif
+#ifndef DBGERR
+#define DBGERR(fmt)
+#endif
+#ifndef DBGBH
+#define DBGBH(fmt)
+#endif
+#ifndef DBGISR
+#define DBGISR(fmt)
+#endif
+
+#ifdef DBGDATA
+static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
+{
+	int i;
+	int linecount;
+	printk("%s %s data:\n",info->device_name, label);
+	while(count) {
+		linecount = (count > 16) ? 16 : count;
+		for(i=0; i < linecount; i++)
+			printk("%02X ",(unsigned char)data[i]);
+		for(;i<17;i++)
+			printk("   ");
+		for(i=0;i<linecount;i++) {
+			if (data[i]>=040 && data[i]<=0176)
+				printk("%c",data[i]);
+			else
+				printk(".");
+		}
+		printk("\n");
+		data  += linecount;
+		count -= linecount;
+	}
+}
+#else
+#define DBGDATA(info, buf, size, label)
+#endif
+
+#ifdef DBGTBUF
+static void dump_tbufs(struct slgt_info *info)
+{
+	int i;
+	printk("tbuf_current=%d\n", info->tbuf_current);
+	for (i=0 ; i < info->tbuf_count ; i++) {
+		printk("%d: count=%04X status=%04X\n",
+			i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
+	}
+}
+#else
+#define DBGTBUF(info)
+#endif
+
+#ifdef DBGRBUF
+static void dump_rbufs(struct slgt_info *info)
+{
+	int i;
+	printk("rbuf_current=%d\n", info->rbuf_current);
+	for (i=0 ; i < info->rbuf_count ; i++) {
+		printk("%d: count=%04X status=%04X\n",
+			i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
+	}
+}
+#else
+#define DBGRBUF(info)
+#endif
+
+static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
+{
+#ifdef SANITY_CHECK
+	if (!info) {
+		printk("null struct slgt_info for (%s) in %s\n", devname, name);
+		return 1;
+	}
+	if (info->magic != MGSL_MAGIC) {
+		printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
+		return 1;
+	}
+#else
+	if (!info)
+		return 1;
+#endif
+	return 0;
+}
+
+/**
+ * line discipline callback wrappers
+ *
+ * The wrappers maintain line discipline references
+ * while calling into the line discipline.
+ *
+ * ldisc_receive_buf  - pass receive data to line discipline
+ */
+static void ldisc_receive_buf(struct tty_struct *tty,
+			      const __u8 *data, char *flags, int count)
+{
+	struct tty_ldisc *ld;
+	if (!tty)
+		return;
+	ld = tty_ldisc_ref(tty);
+	if (ld) {
+		if (ld->ops->receive_buf)
+			ld->ops->receive_buf(tty, data, flags, count);
+		tty_ldisc_deref(ld);
+	}
+}
+
+/* tty callbacks */
+
+static int open(struct tty_struct *tty, struct file *filp)
+{
+	struct slgt_info *info;
+	int retval, line;
+	unsigned long flags;
+
+	line = tty->index;
+	if ((line < 0) || (line >= slgt_device_count)) {
+		DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
+		return -ENODEV;
+	}
+
+	info = slgt_device_list;
+	while(info && info->line != line)
+		info = info->next_device;
+	if (sanity_check(info, tty->name, "open"))
+		return -ENODEV;
+	if (info->init_error) {
+		DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
+		return -ENODEV;
+	}
+
+	tty->driver_data = info;
+	info->port.tty = tty;
+
+	DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
+
+	/* If port is closing, signal caller to try again */
+	if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+		if (info->port.flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->port.close_wait);
+		retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
+			-EAGAIN : -ERESTARTSYS);
+		goto cleanup;
+	}
+
+	mutex_lock(&info->port.mutex);
+	info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+	spin_lock_irqsave(&info->netlock, flags);
+	if (info->netcount) {
+		retval = -EBUSY;
+		spin_unlock_irqrestore(&info->netlock, flags);
+		mutex_unlock(&info->port.mutex);
+		goto cleanup;
+	}
+	info->port.count++;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	if (info->port.count == 1) {
+		/* 1st open on this device, init hardware */
+		retval = startup(info);
+		if (retval < 0) {
+			mutex_unlock(&info->port.mutex);
+			goto cleanup;
+		}
+	}
+	mutex_unlock(&info->port.mutex);
+	retval = block_til_ready(tty, filp, info);
+	if (retval) {
+		DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
+		goto cleanup;
+	}
+
+	retval = 0;
+
+cleanup:
+	if (retval) {
+		if (tty->count == 1)
+			info->port.tty = NULL; /* tty layer will release tty struct */
+		if(info->port.count)
+			info->port.count--;
+	}
+
+	DBGINFO(("%s open rc=%d\n", info->device_name, retval));
+	return retval;
+}
+
+static void close(struct tty_struct *tty, struct file *filp)
+{
+	struct slgt_info *info = tty->driver_data;
+
+	if (sanity_check(info, tty->name, "close"))
+		return;
+	DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count));
+
+	if (tty_port_close_start(&info->port, tty, filp) == 0)
+		goto cleanup;
+
+	mutex_lock(&info->port.mutex);
+ 	if (info->port.flags & ASYNC_INITIALIZED)
+ 		wait_until_sent(tty, info->timeout);
+	flush_buffer(tty);
+	tty_ldisc_flush(tty);
+
+	shutdown(info);
+	mutex_unlock(&info->port.mutex);
+
+	tty_port_close_end(&info->port, tty);
+	info->port.tty = NULL;
+cleanup:
+	DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count));
+}
+
+static void hangup(struct tty_struct *tty)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "hangup"))
+		return;
+	DBGINFO(("%s hangup\n", info->device_name));
+
+	flush_buffer(tty);
+
+	mutex_lock(&info->port.mutex);
+	shutdown(info);
+
+	spin_lock_irqsave(&info->port.lock, flags);
+	info->port.count = 0;
+	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->port.tty = NULL;
+	spin_unlock_irqrestore(&info->port.lock, flags);
+	mutex_unlock(&info->port.mutex);
+
+	wake_up_interruptible(&info->port.open_wait);
+}
+
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
+
+	DBGINFO(("%s set_termios\n", tty->driver->name));
+
+	change_params(info);
+
+	/* Handle transition to B0 status */
+	if (old_termios->c_cflag & CBAUD &&
+	    !(tty->termios->c_cflag & CBAUD)) {
+		info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+		spin_lock_irqsave(&info->lock,flags);
+		set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+
+	/* Handle transition away from B0 status */
+	if (!(old_termios->c_cflag & CBAUD) &&
+	    tty->termios->c_cflag & CBAUD) {
+		info->signals |= SerialSignal_DTR;
+ 		if (!(tty->termios->c_cflag & CRTSCTS) ||
+ 		    !test_bit(TTY_THROTTLED, &tty->flags)) {
+			info->signals |= SerialSignal_RTS;
+ 		}
+		spin_lock_irqsave(&info->lock,flags);
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+
+	/* Handle turning off CRTSCTS */
+	if (old_termios->c_cflag & CRTSCTS &&
+	    !(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		tx_release(tty);
+	}
+}
+
+static void update_tx_timer(struct slgt_info *info)
+{
+	/*
+	 * use worst case speed of 1200bps to calculate transmit timeout
+	 * based on data in buffers (tbuf_bytes) and FIFO (128 bytes)
+	 */
+	if (info->params.mode == MGSL_MODE_HDLC) {
+		int timeout  = (tbuf_bytes(info) * 7) + 1000;
+		mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout));
+	}
+}
+
+static int write(struct tty_struct *tty,
+		 const unsigned char *buf, int count)
+{
+	int ret = 0;
+	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "write"))
+		return -EIO;
+
+	DBGINFO(("%s write count=%d\n", info->device_name, count));
+
+	if (!info->tx_buf || (count > info->max_frame_size))
+		return -EIO;
+
+	if (!count || tty->stopped || tty->hw_stopped)
+		return 0;
+
+	spin_lock_irqsave(&info->lock, flags);
+
+	if (info->tx_count) {
+		/* send accumulated data from send_char() */
+		if (!tx_load(info, info->tx_buf, info->tx_count))
+			goto cleanup;
+		info->tx_count = 0;
+	}
+
+	if (tx_load(info, buf, count))
+		ret = count;
+
+cleanup:
+	spin_unlock_irqrestore(&info->lock, flags);
+	DBGINFO(("%s write rc=%d\n", info->device_name, ret));
+	return ret;
+}
+
+static int put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
+	int ret = 0;
+
+	if (sanity_check(info, tty->name, "put_char"))
+		return 0;
+	DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
+	if (!info->tx_buf)
+		return 0;
+	spin_lock_irqsave(&info->lock,flags);
+	if (info->tx_count < info->max_frame_size) {
+		info->tx_buf[info->tx_count++] = ch;
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&info->lock,flags);
+	return ret;
+}
+
+static void send_xchar(struct tty_struct *tty, char ch)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "send_xchar"))
+		return;
+	DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
+	info->x_char = ch;
+	if (ch) {
+		spin_lock_irqsave(&info->lock,flags);
+		if (!info->tx_enabled)
+		 	tx_start(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+}
+
+static void wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned long orig_jiffies, char_time;
+
+	if (!info )
+		return;
+	if (sanity_check(info, tty->name, "wait_until_sent"))
+		return;
+	DBGINFO(("%s wait_until_sent entry\n", info->device_name));
+	if (!(info->port.flags & ASYNC_INITIALIZED))
+		goto exit;
+
+	orig_jiffies = jiffies;
+
+	/* Set check interval to 1/5 of estimated time to
+	 * send a character, and make it at least 1. The check
+	 * interval should also be less than the timeout.
+	 * Note: use tight timings here to satisfy the NIST-PCTS.
+	 */
+
+	if (info->params.data_rate) {
+	       	char_time = info->timeout/(32 * 5);
+		if (!char_time)
+			char_time++;
+	} else
+		char_time = 1;
+
+	if (timeout)
+		char_time = min_t(unsigned long, char_time, timeout);
+
+	while (info->tx_active) {
+		msleep_interruptible(jiffies_to_msecs(char_time));
+		if (signal_pending(current))
+			break;
+		if (timeout && time_after(jiffies, orig_jiffies + timeout))
+			break;
+	}
+exit:
+	DBGINFO(("%s wait_until_sent exit\n", info->device_name));
+}
+
+static int write_room(struct tty_struct *tty)
+{
+	struct slgt_info *info = tty->driver_data;
+	int ret;
+
+	if (sanity_check(info, tty->name, "write_room"))
+		return 0;
+	ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
+	DBGINFO(("%s write_room=%d\n", info->device_name, ret));
+	return ret;
+}
+
+static void flush_chars(struct tty_struct *tty)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "flush_chars"))
+		return;
+	DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
+
+	if (info->tx_count <= 0 || tty->stopped ||
+	    tty->hw_stopped || !info->tx_buf)
+		return;
+
+	DBGINFO(("%s flush_chars start transmit\n", info->device_name));
+
+	spin_lock_irqsave(&info->lock,flags);
+	if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
+		info->tx_count = 0;
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+static void flush_buffer(struct tty_struct *tty)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "flush_buffer"))
+		return;
+	DBGINFO(("%s flush_buffer\n", info->device_name));
+
+	spin_lock_irqsave(&info->lock, flags);
+	info->tx_count = 0;
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	tty_wakeup(tty);
+}
+
+/*
+ * throttle (stop) transmitter
+ */
+static void tx_hold(struct tty_struct *tty)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "tx_hold"))
+		return;
+	DBGINFO(("%s tx_hold\n", info->device_name));
+	spin_lock_irqsave(&info->lock,flags);
+	if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
+	 	tx_stop(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/*
+ * release (start) transmitter
+ */
+static void tx_release(struct tty_struct *tty)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "tx_release"))
+		return;
+	DBGINFO(("%s tx_release\n", info->device_name));
+	spin_lock_irqsave(&info->lock, flags);
+	if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
+		info->tx_count = 0;
+	spin_unlock_irqrestore(&info->lock, flags);
+}
+
+/*
+ * Service an IOCTL request
+ *
+ * Arguments
+ *
+ * 	tty	pointer to tty instance data
+ * 	cmd	IOCTL command code
+ * 	arg	command argument/context
+ *
+ * Return 0 if success, otherwise error code
+ */
+static int ioctl(struct tty_struct *tty,
+		 unsigned int cmd, unsigned long arg)
+{
+	struct slgt_info *info = tty->driver_data;
+	void __user *argp = (void __user *)arg;
+	int ret;
+
+	if (sanity_check(info, tty->name, "ioctl"))
+		return -ENODEV;
+	DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
+
+	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+	    (cmd != TIOCMIWAIT)) {
+		if (tty->flags & (1 << TTY_IO_ERROR))
+		    return -EIO;
+	}
+
+	switch (cmd) {
+	case MGSL_IOCWAITEVENT:
+		return wait_mgsl_event(info, argp);
+	case TIOCMIWAIT:
+		return modem_input_wait(info,(int)arg);
+	case MGSL_IOCSGPIO:
+		return set_gpio(info, argp);
+	case MGSL_IOCGGPIO:
+		return get_gpio(info, argp);
+	case MGSL_IOCWAITGPIO:
+		return wait_gpio(info, argp);
+	case MGSL_IOCGXSYNC:
+		return get_xsync(info, argp);
+	case MGSL_IOCSXSYNC:
+		return set_xsync(info, (int)arg);
+	case MGSL_IOCGXCTRL:
+		return get_xctrl(info, argp);
+	case MGSL_IOCSXCTRL:
+		return set_xctrl(info, (int)arg);
+	}
+	mutex_lock(&info->port.mutex);
+	switch (cmd) {
+	case MGSL_IOCGPARAMS:
+		ret = get_params(info, argp);
+		break;
+	case MGSL_IOCSPARAMS:
+		ret = set_params(info, argp);
+		break;
+	case MGSL_IOCGTXIDLE:
+		ret = get_txidle(info, argp);
+		break;
+	case MGSL_IOCSTXIDLE:
+		ret = set_txidle(info, (int)arg);
+		break;
+	case MGSL_IOCTXENABLE:
+		ret = tx_enable(info, (int)arg);
+		break;
+	case MGSL_IOCRXENABLE:
+		ret = rx_enable(info, (int)arg);
+		break;
+	case MGSL_IOCTXABORT:
+		ret = tx_abort(info);
+		break;
+	case MGSL_IOCGSTATS:
+		ret = get_stats(info, argp);
+		break;
+	case MGSL_IOCGIF:
+		ret = get_interface(info, argp);
+		break;
+	case MGSL_IOCSIF:
+		ret = set_interface(info,(int)arg);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+	}
+	mutex_unlock(&info->port.mutex);
+	return ret;
+}
+
+static int get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+
+{
+	struct slgt_info *info = tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
+/*
+ * support for 32 bit ioctl calls on 64 bit systems
+ */
+#ifdef CONFIG_COMPAT
+static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
+{
+	struct MGSL_PARAMS32 tmp_params;
+
+	DBGINFO(("%s get_params32\n", info->device_name));
+	memset(&tmp_params, 0, sizeof(tmp_params));
+	tmp_params.mode            = (compat_ulong_t)info->params.mode;
+	tmp_params.loopback        = info->params.loopback;
+	tmp_params.flags           = info->params.flags;
+	tmp_params.encoding        = info->params.encoding;
+	tmp_params.clock_speed     = (compat_ulong_t)info->params.clock_speed;
+	tmp_params.addr_filter     = info->params.addr_filter;
+	tmp_params.crc_type        = info->params.crc_type;
+	tmp_params.preamble_length = info->params.preamble_length;
+	tmp_params.preamble        = info->params.preamble;
+	tmp_params.data_rate       = (compat_ulong_t)info->params.data_rate;
+	tmp_params.data_bits       = info->params.data_bits;
+	tmp_params.stop_bits       = info->params.stop_bits;
+	tmp_params.parity          = info->params.parity;
+	if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
+		return -EFAULT;
+	return 0;
+}
+
+static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
+{
+	struct MGSL_PARAMS32 tmp_params;
+
+	DBGINFO(("%s set_params32\n", info->device_name));
+	if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
+		return -EFAULT;
+
+	spin_lock(&info->lock);
+	if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) {
+		info->base_clock = tmp_params.clock_speed;
+	} else {
+		info->params.mode            = tmp_params.mode;
+		info->params.loopback        = tmp_params.loopback;
+		info->params.flags           = tmp_params.flags;
+		info->params.encoding        = tmp_params.encoding;
+		info->params.clock_speed     = tmp_params.clock_speed;
+		info->params.addr_filter     = tmp_params.addr_filter;
+		info->params.crc_type        = tmp_params.crc_type;
+		info->params.preamble_length = tmp_params.preamble_length;
+		info->params.preamble        = tmp_params.preamble;
+		info->params.data_rate       = tmp_params.data_rate;
+		info->params.data_bits       = tmp_params.data_bits;
+		info->params.stop_bits       = tmp_params.stop_bits;
+		info->params.parity          = tmp_params.parity;
+	}
+	spin_unlock(&info->lock);
+
+	program_hw(info);
+
+	return 0;
+}
+
+static long slgt_compat_ioctl(struct tty_struct *tty,
+			 unsigned int cmd, unsigned long arg)
+{
+	struct slgt_info *info = tty->driver_data;
+	int rc = -ENOIOCTLCMD;
+
+	if (sanity_check(info, tty->name, "compat_ioctl"))
+		return -ENODEV;
+	DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
+
+	switch (cmd) {
+
+	case MGSL_IOCSPARAMS32:
+		rc = set_params32(info, compat_ptr(arg));
+		break;
+
+	case MGSL_IOCGPARAMS32:
+		rc = get_params32(info, compat_ptr(arg));
+		break;
+
+	case MGSL_IOCGPARAMS:
+	case MGSL_IOCSPARAMS:
+	case MGSL_IOCGTXIDLE:
+	case MGSL_IOCGSTATS:
+	case MGSL_IOCWAITEVENT:
+	case MGSL_IOCGIF:
+	case MGSL_IOCSGPIO:
+	case MGSL_IOCGGPIO:
+	case MGSL_IOCWAITGPIO:
+	case MGSL_IOCGXSYNC:
+	case MGSL_IOCGXCTRL:
+	case MGSL_IOCSTXIDLE:
+	case MGSL_IOCTXENABLE:
+	case MGSL_IOCRXENABLE:
+	case MGSL_IOCTXABORT:
+	case TIOCMIWAIT:
+	case MGSL_IOCSIF:
+	case MGSL_IOCSXSYNC:
+	case MGSL_IOCSXCTRL:
+		rc = ioctl(tty, cmd, arg);
+		break;
+	}
+
+	DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
+	return rc;
+}
+#else
+#define slgt_compat_ioctl NULL
+#endif /* ifdef CONFIG_COMPAT */
+
+/*
+ * proc fs support
+ */
+static inline void line_info(struct seq_file *m, struct slgt_info *info)
+{
+	char stat_buf[30];
+	unsigned long flags;
+
+	seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
+		      info->device_name, info->phys_reg_addr,
+		      info->irq_level, info->max_frame_size);
+
+	/* output current serial signal states */
+	spin_lock_irqsave(&info->lock,flags);
+	get_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	stat_buf[0] = 0;
+	stat_buf[1] = 0;
+	if (info->signals & SerialSignal_RTS)
+		strcat(stat_buf, "|RTS");
+	if (info->signals & SerialSignal_CTS)
+		strcat(stat_buf, "|CTS");
+	if (info->signals & SerialSignal_DTR)
+		strcat(stat_buf, "|DTR");
+	if (info->signals & SerialSignal_DSR)
+		strcat(stat_buf, "|DSR");
+	if (info->signals & SerialSignal_DCD)
+		strcat(stat_buf, "|CD");
+	if (info->signals & SerialSignal_RI)
+		strcat(stat_buf, "|RI");
+
+	if (info->params.mode != MGSL_MODE_ASYNC) {
+		seq_printf(m, "\tHDLC txok:%d rxok:%d",
+			       info->icount.txok, info->icount.rxok);
+		if (info->icount.txunder)
+			seq_printf(m, " txunder:%d", info->icount.txunder);
+		if (info->icount.txabort)
+			seq_printf(m, " txabort:%d", info->icount.txabort);
+		if (info->icount.rxshort)
+			seq_printf(m, " rxshort:%d", info->icount.rxshort);
+		if (info->icount.rxlong)
+			seq_printf(m, " rxlong:%d", info->icount.rxlong);
+		if (info->icount.rxover)
+			seq_printf(m, " rxover:%d", info->icount.rxover);
+		if (info->icount.rxcrc)
+			seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
+	} else {
+		seq_printf(m, "\tASYNC tx:%d rx:%d",
+			       info->icount.tx, info->icount.rx);
+		if (info->icount.frame)
+			seq_printf(m, " fe:%d", info->icount.frame);
+		if (info->icount.parity)
+			seq_printf(m, " pe:%d", info->icount.parity);
+		if (info->icount.brk)
+			seq_printf(m, " brk:%d", info->icount.brk);
+		if (info->icount.overrun)
+			seq_printf(m, " oe:%d", info->icount.overrun);
+	}
+
+	/* Append serial signal status to end */
+	seq_printf(m, " %s\n", stat_buf+1);
+
+	seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
+		       info->tx_active,info->bh_requested,info->bh_running,
+		       info->pending_bh);
+}
+
+/* Called to print information about devices
+ */
+static int synclink_gt_proc_show(struct seq_file *m, void *v)
+{
+	struct slgt_info *info;
+
+	seq_puts(m, "synclink_gt driver\n");
+
+	info = slgt_device_list;
+	while( info ) {
+		line_info(m, info);
+		info = info->next_device;
+	}
+	return 0;
+}
+
+static int synclink_gt_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, synclink_gt_proc_show, NULL);
+}
+
+static const struct file_operations synclink_gt_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= synclink_gt_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/*
+ * return count of bytes in transmit buffer
+ */
+static int chars_in_buffer(struct tty_struct *tty)
+{
+	struct slgt_info *info = tty->driver_data;
+	int count;
+	if (sanity_check(info, tty->name, "chars_in_buffer"))
+		return 0;
+	count = tbuf_bytes(info);
+	DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count));
+	return count;
+}
+
+/*
+ * signal remote device to throttle send data (our receive data)
+ */
+static void throttle(struct tty_struct * tty)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "throttle"))
+		return;
+	DBGINFO(("%s throttle\n", info->device_name));
+	if (I_IXOFF(tty))
+		send_xchar(tty, STOP_CHAR(tty));
+ 	if (tty->termios->c_cflag & CRTSCTS) {
+		spin_lock_irqsave(&info->lock,flags);
+		info->signals &= ~SerialSignal_RTS;
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+}
+
+/*
+ * signal remote device to stop throttling send data (our receive data)
+ */
+static void unthrottle(struct tty_struct * tty)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "unthrottle"))
+		return;
+	DBGINFO(("%s unthrottle\n", info->device_name));
+	if (I_IXOFF(tty)) {
+		if (info->x_char)
+			info->x_char = 0;
+		else
+			send_xchar(tty, START_CHAR(tty));
+	}
+ 	if (tty->termios->c_cflag & CRTSCTS) {
+		spin_lock_irqsave(&info->lock,flags);
+		info->signals |= SerialSignal_RTS;
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+}
+
+/*
+ * set or clear transmit break condition
+ * break_state	-1=set break condition, 0=clear
+ */
+static int set_break(struct tty_struct *tty, int break_state)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned short value;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "set_break"))
+		return -EINVAL;
+	DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
+
+	spin_lock_irqsave(&info->lock,flags);
+	value = rd_reg16(info, TCR);
+ 	if (break_state == -1)
+		value |= BIT6;
+	else
+		value &= ~BIT6;
+	wr_reg16(info, TCR, value);
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+#if SYNCLINK_GENERIC_HDLC
+
+/**
+ * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
+ * set encoding and frame check sequence (FCS) options
+ *
+ * dev       pointer to network device structure
+ * encoding  serial encoding setting
+ * parity    FCS setting
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
+			  unsigned short parity)
+{
+	struct slgt_info *info = dev_to_port(dev);
+	unsigned char  new_encoding;
+	unsigned short new_crctype;
+
+	/* return error if TTY interface open */
+	if (info->port.count)
+		return -EBUSY;
+
+	DBGINFO(("%s hdlcdev_attach\n", info->device_name));
+
+	switch (encoding)
+	{
+	case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
+	case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
+	case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
+	case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
+	case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
+	default: return -EINVAL;
+	}
+
+	switch (parity)
+	{
+	case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
+	case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
+	case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
+	default: return -EINVAL;
+	}
+
+	info->params.encoding = new_encoding;
+	info->params.crc_type = new_crctype;
+
+	/* if network interface up, reprogram hardware */
+	if (info->netcount)
+		program_hw(info);
+
+	return 0;
+}
+
+/**
+ * called by generic HDLC layer to send frame
+ *
+ * skb  socket buffer containing HDLC frame
+ * dev  pointer to network device structure
+ */
+static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
+				      struct net_device *dev)
+{
+	struct slgt_info *info = dev_to_port(dev);
+	unsigned long flags;
+
+	DBGINFO(("%s hdlc_xmit\n", dev->name));
+
+	if (!skb->len)
+		return NETDEV_TX_OK;
+
+	/* stop sending until this frame completes */
+	netif_stop_queue(dev);
+
+	/* update network statistics */
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
+
+	/* save start time for transmit timeout detection */
+	dev->trans_start = jiffies;
+
+	spin_lock_irqsave(&info->lock, flags);
+	tx_load(info, skb->data, skb->len);
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	/* done with socket buffer, so free it */
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * called by network layer when interface enabled
+ * claim resources and initialize hardware
+ *
+ * dev  pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_open(struct net_device *dev)
+{
+	struct slgt_info *info = dev_to_port(dev);
+	int rc;
+	unsigned long flags;
+
+	if (!try_module_get(THIS_MODULE))
+		return -EBUSY;
+
+	DBGINFO(("%s hdlcdev_open\n", dev->name));
+
+	/* generic HDLC layer open processing */
+	if ((rc = hdlc_open(dev)))
+		return rc;
+
+	/* arbitrate between network and tty opens */
+	spin_lock_irqsave(&info->netlock, flags);
+	if (info->port.count != 0 || info->netcount != 0) {
+		DBGINFO(("%s hdlc_open busy\n", dev->name));
+		spin_unlock_irqrestore(&info->netlock, flags);
+		return -EBUSY;
+	}
+	info->netcount=1;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	/* claim resources and init adapter */
+	if ((rc = startup(info)) != 0) {
+		spin_lock_irqsave(&info->netlock, flags);
+		info->netcount=0;
+		spin_unlock_irqrestore(&info->netlock, flags);
+		return rc;
+	}
+
+	/* assert DTR and RTS, apply hardware settings */
+	info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+	program_hw(info);
+
+	/* enable network layer transmit */
+	dev->trans_start = jiffies;
+	netif_start_queue(dev);
+
+	/* inform generic HDLC layer of current DCD status */
+	spin_lock_irqsave(&info->lock, flags);
+	get_signals(info);
+	spin_unlock_irqrestore(&info->lock, flags);
+	if (info->signals & SerialSignal_DCD)
+		netif_carrier_on(dev);
+	else
+		netif_carrier_off(dev);
+	return 0;
+}
+
+/**
+ * called by network layer when interface is disabled
+ * shutdown hardware and release resources
+ *
+ * dev  pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_close(struct net_device *dev)
+{
+	struct slgt_info *info = dev_to_port(dev);
+	unsigned long flags;
+
+	DBGINFO(("%s hdlcdev_close\n", dev->name));
+
+	netif_stop_queue(dev);
+
+	/* shutdown adapter and release resources */
+	shutdown(info);
+
+	hdlc_close(dev);
+
+	spin_lock_irqsave(&info->netlock, flags);
+	info->netcount=0;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	module_put(THIS_MODULE);
+	return 0;
+}
+
+/**
+ * called by network layer to process IOCTL call to network device
+ *
+ * dev  pointer to network device structure
+ * ifr  pointer to network interface request structure
+ * cmd  IOCTL command code
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	const size_t size = sizeof(sync_serial_settings);
+	sync_serial_settings new_line;
+	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+	struct slgt_info *info = dev_to_port(dev);
+	unsigned int flags;
+
+	DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
+
+	/* return error if TTY interface open */
+	if (info->port.count)
+		return -EBUSY;
+
+	if (cmd != SIOCWANDEV)
+		return hdlc_ioctl(dev, ifr, cmd);
+
+	memset(&new_line, 0, sizeof(new_line));
+
+	switch(ifr->ifr_settings.type) {
+	case IF_GET_IFACE: /* return current sync_serial_settings */
+
+		ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+		if (ifr->ifr_settings.size < size) {
+			ifr->ifr_settings.size = size; /* data size wanted */
+			return -ENOBUFS;
+		}
+
+		flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
+
+		switch (flags){
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
+		case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
+		default: new_line.clock_type = CLOCK_DEFAULT;
+		}
+
+		new_line.clock_rate = info->params.clock_speed;
+		new_line.loopback   = info->params.loopback ? 1:0;
+
+		if (copy_to_user(line, &new_line, size))
+			return -EFAULT;
+		return 0;
+
+	case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
+
+		if(!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&new_line, line, size))
+			return -EFAULT;
+
+		switch (new_line.clock_type)
+		{
+		case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
+		case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
+		case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
+		case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
+		case CLOCK_DEFAULT:  flags = info->params.flags &
+					     (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
+		default: return -EINVAL;
+		}
+
+		if (new_line.loopback != 0 && new_line.loopback != 1)
+			return -EINVAL;
+
+		info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
+		info->params.flags |= flags;
+
+		info->params.loopback = new_line.loopback;
+
+		if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
+			info->params.clock_speed = new_line.clock_rate;
+		else
+			info->params.clock_speed = 0;
+
+		/* if network interface up, reprogram hardware */
+		if (info->netcount)
+			program_hw(info);
+		return 0;
+
+	default:
+		return hdlc_ioctl(dev, ifr, cmd);
+	}
+}
+
+/**
+ * called by network layer when transmit timeout is detected
+ *
+ * dev  pointer to network device structure
+ */
+static void hdlcdev_tx_timeout(struct net_device *dev)
+{
+	struct slgt_info *info = dev_to_port(dev);
+	unsigned long flags;
+
+	DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
+
+	dev->stats.tx_errors++;
+	dev->stats.tx_aborted_errors++;
+
+	spin_lock_irqsave(&info->lock,flags);
+	tx_stop(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	netif_wake_queue(dev);
+}
+
+/**
+ * called by device driver when transmit completes
+ * reenable network layer transmit if stopped
+ *
+ * info  pointer to device instance information
+ */
+static void hdlcdev_tx_done(struct slgt_info *info)
+{
+	if (netif_queue_stopped(info->netdev))
+		netif_wake_queue(info->netdev);
+}
+
+/**
+ * called by device driver when frame received
+ * pass frame to network layer
+ *
+ * info  pointer to device instance information
+ * buf   pointer to buffer contianing frame data
+ * size  count of data bytes in buf
+ */
+static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
+{
+	struct sk_buff *skb = dev_alloc_skb(size);
+	struct net_device *dev = info->netdev;
+
+	DBGINFO(("%s hdlcdev_rx\n", dev->name));
+
+	if (skb == NULL) {
+		DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
+		dev->stats.rx_dropped++;
+		return;
+	}
+
+	memcpy(skb_put(skb, size), buf, size);
+
+	skb->protocol = hdlc_type_trans(skb, dev);
+
+	dev->stats.rx_packets++;
+	dev->stats.rx_bytes += size;
+
+	netif_rx(skb);
+}
+
+static const struct net_device_ops hdlcdev_ops = {
+	.ndo_open       = hdlcdev_open,
+	.ndo_stop       = hdlcdev_close,
+	.ndo_change_mtu = hdlc_change_mtu,
+	.ndo_start_xmit = hdlc_start_xmit,
+	.ndo_do_ioctl   = hdlcdev_ioctl,
+	.ndo_tx_timeout = hdlcdev_tx_timeout,
+};
+
+/**
+ * called by device driver when adding device instance
+ * do generic HDLC initialization
+ *
+ * info  pointer to device instance information
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_init(struct slgt_info *info)
+{
+	int rc;
+	struct net_device *dev;
+	hdlc_device *hdlc;
+
+	/* allocate and initialize network and HDLC layer objects */
+
+	if (!(dev = alloc_hdlcdev(info))) {
+		printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
+		return -ENOMEM;
+	}
+
+	/* for network layer reporting purposes only */
+	dev->mem_start = info->phys_reg_addr;
+	dev->mem_end   = info->phys_reg_addr + SLGT_REG_SIZE - 1;
+	dev->irq       = info->irq_level;
+
+	/* network layer callbacks and settings */
+	dev->netdev_ops	    = &hdlcdev_ops;
+	dev->watchdog_timeo = 10 * HZ;
+	dev->tx_queue_len   = 50;
+
+	/* generic HDLC layer callbacks and settings */
+	hdlc         = dev_to_hdlc(dev);
+	hdlc->attach = hdlcdev_attach;
+	hdlc->xmit   = hdlcdev_xmit;
+
+	/* register objects with HDLC layer */
+	if ((rc = register_hdlc_device(dev))) {
+		printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
+		free_netdev(dev);
+		return rc;
+	}
+
+	info->netdev = dev;
+	return 0;
+}
+
+/**
+ * called by device driver when removing device instance
+ * do generic HDLC cleanup
+ *
+ * info  pointer to device instance information
+ */
+static void hdlcdev_exit(struct slgt_info *info)
+{
+	unregister_hdlc_device(info->netdev);
+	free_netdev(info->netdev);
+	info->netdev = NULL;
+}
+
+#endif /* ifdef CONFIG_HDLC */
+
+/*
+ * get async data from rx DMA buffers
+ */
+static void rx_async(struct slgt_info *info)
+{
+ 	struct tty_struct *tty = info->port.tty;
+ 	struct mgsl_icount *icount = &info->icount;
+	unsigned int start, end;
+	unsigned char *p;
+	unsigned char status;
+	struct slgt_desc *bufs = info->rbufs;
+	int i, count;
+	int chars = 0;
+	int stat;
+	unsigned char ch;
+
+	start = end = info->rbuf_current;
+
+	while(desc_complete(bufs[end])) {
+		count = desc_count(bufs[end]) - info->rbuf_index;
+		p     = bufs[end].buf + info->rbuf_index;
+
+		DBGISR(("%s rx_async count=%d\n", info->device_name, count));
+		DBGDATA(info, p, count, "rx");
+
+		for(i=0 ; i < count; i+=2, p+=2) {
+			ch = *p;
+			icount->rx++;
+
+			stat = 0;
+
+			if ((status = *(p+1) & (BIT1 + BIT0))) {
+				if (status & BIT1)
+					icount->parity++;
+				else if (status & BIT0)
+					icount->frame++;
+				/* discard char if tty control flags say so */
+				if (status & info->ignore_status_mask)
+					continue;
+				if (status & BIT1)
+					stat = TTY_PARITY;
+				else if (status & BIT0)
+					stat = TTY_FRAME;
+			}
+			if (tty) {
+				tty_insert_flip_char(tty, ch, stat);
+				chars++;
+			}
+		}
+
+		if (i < count) {
+			/* receive buffer not completed */
+			info->rbuf_index += i;
+			mod_timer(&info->rx_timer, jiffies + 1);
+			break;
+		}
+
+		info->rbuf_index = 0;
+		free_rbufs(info, end, end);
+
+		if (++end == info->rbuf_count)
+			end = 0;
+
+		/* if entire list searched then no frame available */
+		if (end == start)
+			break;
+	}
+
+	if (tty && chars)
+		tty_flip_buffer_push(tty);
+}
+
+/*
+ * return next bottom half action to perform
+ */
+static int bh_action(struct slgt_info *info)
+{
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	if (info->pending_bh & BH_RECEIVE) {
+		info->pending_bh &= ~BH_RECEIVE;
+		rc = BH_RECEIVE;
+	} else if (info->pending_bh & BH_TRANSMIT) {
+		info->pending_bh &= ~BH_TRANSMIT;
+		rc = BH_TRANSMIT;
+	} else if (info->pending_bh & BH_STATUS) {
+		info->pending_bh &= ~BH_STATUS;
+		rc = BH_STATUS;
+	} else {
+		/* Mark BH routine as complete */
+		info->bh_running = false;
+		info->bh_requested = false;
+		rc = 0;
+	}
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return rc;
+}
+
+/*
+ * perform bottom half processing
+ */
+static void bh_handler(struct work_struct *work)
+{
+	struct slgt_info *info = container_of(work, struct slgt_info, task);
+	int action;
+
+	if (!info)
+		return;
+	info->bh_running = true;
+
+	while((action = bh_action(info))) {
+		switch (action) {
+		case BH_RECEIVE:
+			DBGBH(("%s bh receive\n", info->device_name));
+			switch(info->params.mode) {
+			case MGSL_MODE_ASYNC:
+				rx_async(info);
+				break;
+			case MGSL_MODE_HDLC:
+				while(rx_get_frame(info));
+				break;
+			case MGSL_MODE_RAW:
+			case MGSL_MODE_MONOSYNC:
+			case MGSL_MODE_BISYNC:
+			case MGSL_MODE_XSYNC:
+				while(rx_get_buf(info));
+				break;
+			}
+			/* restart receiver if rx DMA buffers exhausted */
+			if (info->rx_restart)
+				rx_start(info);
+			break;
+		case BH_TRANSMIT:
+			bh_transmit(info);
+			break;
+		case BH_STATUS:
+			DBGBH(("%s bh status\n", info->device_name));
+			info->ri_chkcount = 0;
+			info->dsr_chkcount = 0;
+			info->dcd_chkcount = 0;
+			info->cts_chkcount = 0;
+			break;
+		default:
+			DBGBH(("%s unknown action\n", info->device_name));
+			break;
+		}
+	}
+	DBGBH(("%s bh_handler exit\n", info->device_name));
+}
+
+static void bh_transmit(struct slgt_info *info)
+{
+	struct tty_struct *tty = info->port.tty;
+
+	DBGBH(("%s bh_transmit\n", info->device_name));
+	if (tty)
+		tty_wakeup(tty);
+}
+
+static void dsr_change(struct slgt_info *info, unsigned short status)
+{
+	if (status & BIT3) {
+		info->signals |= SerialSignal_DSR;
+		info->input_signal_events.dsr_up++;
+	} else {
+		info->signals &= ~SerialSignal_DSR;
+		info->input_signal_events.dsr_down++;
+	}
+	DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
+	if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
+		slgt_irq_off(info, IRQ_DSR);
+		return;
+	}
+	info->icount.dsr++;
+	wake_up_interruptible(&info->status_event_wait_q);
+	wake_up_interruptible(&info->event_wait_q);
+	info->pending_bh |= BH_STATUS;
+}
+
+static void cts_change(struct slgt_info *info, unsigned short status)
+{
+	if (status & BIT2) {
+		info->signals |= SerialSignal_CTS;
+		info->input_signal_events.cts_up++;
+	} else {
+		info->signals &= ~SerialSignal_CTS;
+		info->input_signal_events.cts_down++;
+	}
+	DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
+	if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
+		slgt_irq_off(info, IRQ_CTS);
+		return;
+	}
+	info->icount.cts++;
+	wake_up_interruptible(&info->status_event_wait_q);
+	wake_up_interruptible(&info->event_wait_q);
+	info->pending_bh |= BH_STATUS;
+
+	if (info->port.flags & ASYNC_CTS_FLOW) {
+		if (info->port.tty) {
+			if (info->port.tty->hw_stopped) {
+				if (info->signals & SerialSignal_CTS) {
+		 			info->port.tty->hw_stopped = 0;
+					info->pending_bh |= BH_TRANSMIT;
+					return;
+				}
+			} else {
+				if (!(info->signals & SerialSignal_CTS))
+		 			info->port.tty->hw_stopped = 1;
+			}
+		}
+	}
+}
+
+static void dcd_change(struct slgt_info *info, unsigned short status)
+{
+	if (status & BIT1) {
+		info->signals |= SerialSignal_DCD;
+		info->input_signal_events.dcd_up++;
+	} else {
+		info->signals &= ~SerialSignal_DCD;
+		info->input_signal_events.dcd_down++;
+	}
+	DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
+	if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
+		slgt_irq_off(info, IRQ_DCD);
+		return;
+	}
+	info->icount.dcd++;
+#if SYNCLINK_GENERIC_HDLC
+	if (info->netcount) {
+		if (info->signals & SerialSignal_DCD)
+			netif_carrier_on(info->netdev);
+		else
+			netif_carrier_off(info->netdev);
+	}
+#endif
+	wake_up_interruptible(&info->status_event_wait_q);
+	wake_up_interruptible(&info->event_wait_q);
+	info->pending_bh |= BH_STATUS;
+
+	if (info->port.flags & ASYNC_CHECK_CD) {
+		if (info->signals & SerialSignal_DCD)
+			wake_up_interruptible(&info->port.open_wait);
+		else {
+			if (info->port.tty)
+				tty_hangup(info->port.tty);
+		}
+	}
+}
+
+static void ri_change(struct slgt_info *info, unsigned short status)
+{
+	if (status & BIT0) {
+		info->signals |= SerialSignal_RI;
+		info->input_signal_events.ri_up++;
+	} else {
+		info->signals &= ~SerialSignal_RI;
+		info->input_signal_events.ri_down++;
+	}
+	DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
+	if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
+		slgt_irq_off(info, IRQ_RI);
+		return;
+	}
+	info->icount.rng++;
+	wake_up_interruptible(&info->status_event_wait_q);
+	wake_up_interruptible(&info->event_wait_q);
+	info->pending_bh |= BH_STATUS;
+}
+
+static void isr_rxdata(struct slgt_info *info)
+{
+	unsigned int count = info->rbuf_fill_count;
+	unsigned int i = info->rbuf_fill_index;
+	unsigned short reg;
+
+	while (rd_reg16(info, SSR) & IRQ_RXDATA) {
+		reg = rd_reg16(info, RDR);
+		DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg));
+		if (desc_complete(info->rbufs[i])) {
+			/* all buffers full */
+			rx_stop(info);
+			info->rx_restart = 1;
+			continue;
+		}
+		info->rbufs[i].buf[count++] = (unsigned char)reg;
+		/* async mode saves status byte to buffer for each data byte */
+		if (info->params.mode == MGSL_MODE_ASYNC)
+			info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8);
+		if (count == info->rbuf_fill_level || (reg & BIT10)) {
+			/* buffer full or end of frame */
+			set_desc_count(info->rbufs[i], count);
+			set_desc_status(info->rbufs[i], BIT15 | (reg >> 8));
+			info->rbuf_fill_count = count = 0;
+			if (++i == info->rbuf_count)
+				i = 0;
+			info->pending_bh |= BH_RECEIVE;
+		}
+	}
+
+	info->rbuf_fill_index = i;
+	info->rbuf_fill_count = count;
+}
+
+static void isr_serial(struct slgt_info *info)
+{
+	unsigned short status = rd_reg16(info, SSR);
+
+	DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
+
+	wr_reg16(info, SSR, status); /* clear pending */
+
+	info->irq_occurred = true;
+
+	if (info->params.mode == MGSL_MODE_ASYNC) {
+		if (status & IRQ_TXIDLE) {
+			if (info->tx_active)
+				isr_txeom(info, status);
+		}
+		if (info->rx_pio && (status & IRQ_RXDATA))
+			isr_rxdata(info);
+		if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
+			info->icount.brk++;
+			/* process break detection if tty control allows */
+			if (info->port.tty) {
+				if (!(status & info->ignore_status_mask)) {
+					if (info->read_status_mask & MASK_BREAK) {
+						tty_insert_flip_char(info->port.tty, 0, TTY_BREAK);
+						if (info->port.flags & ASYNC_SAK)
+							do_SAK(info->port.tty);
+					}
+				}
+			}
+		}
+	} else {
+		if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
+			isr_txeom(info, status);
+		if (info->rx_pio && (status & IRQ_RXDATA))
+			isr_rxdata(info);
+		if (status & IRQ_RXIDLE) {
+			if (status & RXIDLE)
+				info->icount.rxidle++;
+			else
+				info->icount.exithunt++;
+			wake_up_interruptible(&info->event_wait_q);
+		}
+
+		if (status & IRQ_RXOVER)
+			rx_start(info);
+	}
+
+	if (status & IRQ_DSR)
+		dsr_change(info, status);
+	if (status & IRQ_CTS)
+		cts_change(info, status);
+	if (status & IRQ_DCD)
+		dcd_change(info, status);
+	if (status & IRQ_RI)
+		ri_change(info, status);
+}
+
+static void isr_rdma(struct slgt_info *info)
+{
+	unsigned int status = rd_reg32(info, RDCSR);
+
+	DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
+
+	/* RDCSR (rx DMA control/status)
+	 *
+	 * 31..07  reserved
+	 * 06      save status byte to DMA buffer
+	 * 05      error
+	 * 04      eol (end of list)
+	 * 03      eob (end of buffer)
+	 * 02      IRQ enable
+	 * 01      reset
+	 * 00      enable
+	 */
+	wr_reg32(info, RDCSR, status);	/* clear pending */
+
+	if (status & (BIT5 + BIT4)) {
+		DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
+		info->rx_restart = true;
+	}
+	info->pending_bh |= BH_RECEIVE;
+}
+
+static void isr_tdma(struct slgt_info *info)
+{
+	unsigned int status = rd_reg32(info, TDCSR);
+
+	DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
+
+	/* TDCSR (tx DMA control/status)
+	 *
+	 * 31..06  reserved
+	 * 05      error
+	 * 04      eol (end of list)
+	 * 03      eob (end of buffer)
+	 * 02      IRQ enable
+	 * 01      reset
+	 * 00      enable
+	 */
+	wr_reg32(info, TDCSR, status);	/* clear pending */
+
+	if (status & (BIT5 + BIT4 + BIT3)) {
+		// another transmit buffer has completed
+		// run bottom half to get more send data from user
+		info->pending_bh |= BH_TRANSMIT;
+	}
+}
+
+/*
+ * return true if there are unsent tx DMA buffers, otherwise false
+ *
+ * if there are unsent buffers then info->tbuf_start
+ * is set to index of first unsent buffer
+ */
+static bool unsent_tbufs(struct slgt_info *info)
+{
+	unsigned int i = info->tbuf_current;
+	bool rc = false;
+
+	/*
+	 * search backwards from last loaded buffer (precedes tbuf_current)
+	 * for first unsent buffer (desc_count > 0)
+	 */
+
+	do {
+		if (i)
+			i--;
+		else
+			i = info->tbuf_count - 1;
+		if (!desc_count(info->tbufs[i]))
+			break;
+		info->tbuf_start = i;
+		rc = true;
+	} while (i != info->tbuf_current);
+
+	return rc;
+}
+
+static void isr_txeom(struct slgt_info *info, unsigned short status)
+{
+	DBGISR(("%s txeom status=%04x\n", info->device_name, status));
+
+	slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
+	tdma_reset(info);
+	if (status & IRQ_TXUNDER) {
+		unsigned short val = rd_reg16(info, TCR);
+		wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
+		wr_reg16(info, TCR, val); /* clear reset bit */
+	}
+
+	if (info->tx_active) {
+		if (info->params.mode != MGSL_MODE_ASYNC) {
+			if (status & IRQ_TXUNDER)
+				info->icount.txunder++;
+			else if (status & IRQ_TXIDLE)
+				info->icount.txok++;
+		}
+
+		if (unsent_tbufs(info)) {
+			tx_start(info);
+			update_tx_timer(info);
+			return;
+		}
+		info->tx_active = false;
+
+		del_timer(&info->tx_timer);
+
+		if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
+			info->signals &= ~SerialSignal_RTS;
+			info->drop_rts_on_tx_done = false;
+			set_signals(info);
+		}
+
+#if SYNCLINK_GENERIC_HDLC
+		if (info->netcount)
+			hdlcdev_tx_done(info);
+		else
+#endif
+		{
+			if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
+				tx_stop(info);
+				return;
+			}
+			info->pending_bh |= BH_TRANSMIT;
+		}
+	}
+}
+
+static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
+{
+	struct cond_wait *w, *prev;
+
+	/* wake processes waiting for specific transitions */
+	for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
+		if (w->data & changed) {
+			w->data = state;
+			wake_up_interruptible(&w->q);
+			if (prev != NULL)
+				prev->next = w->next;
+			else
+				info->gpio_wait_q = w->next;
+		} else
+			prev = w;
+	}
+}
+
+/* interrupt service routine
+ *
+ * 	irq	interrupt number
+ * 	dev_id	device ID supplied during interrupt registration
+ */
+static irqreturn_t slgt_interrupt(int dummy, void *dev_id)
+{
+	struct slgt_info *info = dev_id;
+	unsigned int gsr;
+	unsigned int i;
+
+	DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level));
+
+	while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
+		DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
+		info->irq_occurred = true;
+		for(i=0; i < info->port_count ; i++) {
+			if (info->port_array[i] == NULL)
+				continue;
+			spin_lock(&info->port_array[i]->lock);
+			if (gsr & (BIT8 << i))
+				isr_serial(info->port_array[i]);
+			if (gsr & (BIT16 << (i*2)))
+				isr_rdma(info->port_array[i]);
+			if (gsr & (BIT17 << (i*2)))
+				isr_tdma(info->port_array[i]);
+			spin_unlock(&info->port_array[i]->lock);
+		}
+	}
+
+	if (info->gpio_present) {
+		unsigned int state;
+		unsigned int changed;
+		spin_lock(&info->lock);
+		while ((changed = rd_reg32(info, IOSR)) != 0) {
+			DBGISR(("%s iosr=%08x\n", info->device_name, changed));
+			/* read latched state of GPIO signals */
+			state = rd_reg32(info, IOVR);
+			/* clear pending GPIO interrupt bits */
+			wr_reg32(info, IOSR, changed);
+			for (i=0 ; i < info->port_count ; i++) {
+				if (info->port_array[i] != NULL)
+					isr_gpio(info->port_array[i], changed, state);
+			}
+		}
+		spin_unlock(&info->lock);
+	}
+
+	for(i=0; i < info->port_count ; i++) {
+		struct slgt_info *port = info->port_array[i];
+		if (port == NULL)
+			continue;
+		spin_lock(&port->lock);
+		if ((port->port.count || port->netcount) &&
+		    port->pending_bh && !port->bh_running &&
+		    !port->bh_requested) {
+			DBGISR(("%s bh queued\n", port->device_name));
+			schedule_work(&port->task);
+			port->bh_requested = true;
+		}
+		spin_unlock(&port->lock);
+	}
+
+	DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level));
+	return IRQ_HANDLED;
+}
+
+static int startup(struct slgt_info *info)
+{
+	DBGINFO(("%s startup\n", info->device_name));
+
+	if (info->port.flags & ASYNC_INITIALIZED)
+		return 0;
+
+	if (!info->tx_buf) {
+		info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
+		if (!info->tx_buf) {
+			DBGERR(("%s can't allocate tx buffer\n", info->device_name));
+			return -ENOMEM;
+		}
+	}
+
+	info->pending_bh = 0;
+
+	memset(&info->icount, 0, sizeof(info->icount));
+
+	/* program hardware for current parameters */
+	change_params(info);
+
+	if (info->port.tty)
+		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+
+	info->port.flags |= ASYNC_INITIALIZED;
+
+	return 0;
+}
+
+/*
+ *  called by close() and hangup() to shutdown hardware
+ */
+static void shutdown(struct slgt_info *info)
+{
+	unsigned long flags;
+
+	if (!(info->port.flags & ASYNC_INITIALIZED))
+		return;
+
+	DBGINFO(("%s shutdown\n", info->device_name));
+
+	/* clear status wait queue because status changes */
+	/* can't happen after shutting down the hardware */
+	wake_up_interruptible(&info->status_event_wait_q);
+	wake_up_interruptible(&info->event_wait_q);
+
+	del_timer_sync(&info->tx_timer);
+	del_timer_sync(&info->rx_timer);
+
+	kfree(info->tx_buf);
+	info->tx_buf = NULL;
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	tx_stop(info);
+	rx_stop(info);
+
+	slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
+
+ 	if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+ 		info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+		set_signals(info);
+	}
+
+	flush_cond_wait(&info->gpio_wait_q);
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	if (info->port.tty)
+		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+
+	info->port.flags &= ~ASYNC_INITIALIZED;
+}
+
+static void program_hw(struct slgt_info *info)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	rx_stop(info);
+	tx_stop(info);
+
+	if (info->params.mode != MGSL_MODE_ASYNC ||
+	    info->netcount)
+		sync_mode(info);
+	else
+		async_mode(info);
+
+	set_signals(info);
+
+	info->dcd_chkcount = 0;
+	info->cts_chkcount = 0;
+	info->ri_chkcount = 0;
+	info->dsr_chkcount = 0;
+
+	slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
+	get_signals(info);
+
+	if (info->netcount ||
+	    (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
+		rx_start(info);
+
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/*
+ * reconfigure adapter based on new parameters
+ */
+static void change_params(struct slgt_info *info)
+{
+	unsigned cflag;
+	int bits_per_char;
+
+	if (!info->port.tty || !info->port.tty->termios)
+		return;
+	DBGINFO(("%s change_params\n", info->device_name));
+
+	cflag = info->port.tty->termios->c_cflag;
+
+	/* if B0 rate (hangup) specified then negate DTR and RTS */
+	/* otherwise assert DTR and RTS */
+ 	if (cflag & CBAUD)
+		info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+
+	/* byte size and parity */
+
+	switch (cflag & CSIZE) {
+	case CS5: info->params.data_bits = 5; break;
+	case CS6: info->params.data_bits = 6; break;
+	case CS7: info->params.data_bits = 7; break;
+	case CS8: info->params.data_bits = 8; break;
+	default:  info->params.data_bits = 7; break;
+	}
+
+	info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
+
+	if (cflag & PARENB)
+		info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
+	else
+		info->params.parity = ASYNC_PARITY_NONE;
+
+	/* calculate number of jiffies to transmit a full
+	 * FIFO (32 bytes) at specified data rate
+	 */
+	bits_per_char = info->params.data_bits +
+			info->params.stop_bits + 1;
+
+	info->params.data_rate = tty_get_baud_rate(info->port.tty);
+
+	if (info->params.data_rate) {
+		info->timeout = (32*HZ*bits_per_char) /
+				info->params.data_rate;
+	}
+	info->timeout += HZ/50;		/* Add .02 seconds of slop */
+
+	if (cflag & CRTSCTS)
+		info->port.flags |= ASYNC_CTS_FLOW;
+	else
+		info->port.flags &= ~ASYNC_CTS_FLOW;
+
+	if (cflag & CLOCAL)
+		info->port.flags &= ~ASYNC_CHECK_CD;
+	else
+		info->port.flags |= ASYNC_CHECK_CD;
+
+	/* process tty input control flags */
+
+	info->read_status_mask = IRQ_RXOVER;
+	if (I_INPCK(info->port.tty))
+		info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
+ 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+ 		info->read_status_mask |= MASK_BREAK;
+	if (I_IGNPAR(info->port.tty))
+		info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
+	if (I_IGNBRK(info->port.tty)) {
+		info->ignore_status_mask |= MASK_BREAK;
+		/* If ignoring parity and break indicators, ignore
+		 * overruns too.  (For real raw support).
+		 */
+		if (I_IGNPAR(info->port.tty))
+			info->ignore_status_mask |= MASK_OVERRUN;
+	}
+
+	program_hw(info);
+}
+
+static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
+{
+	DBGINFO(("%s get_stats\n",  info->device_name));
+	if (!user_icount) {
+		memset(&info->icount, 0, sizeof(info->icount));
+	} else {
+		if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
+{
+	DBGINFO(("%s get_params\n", info->device_name));
+	if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
+		return -EFAULT;
+	return 0;
+}
+
+static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
+{
+ 	unsigned long flags;
+	MGSL_PARAMS tmp_params;
+
+	DBGINFO(("%s set_params\n", info->device_name));
+	if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
+		return -EFAULT;
+
+	spin_lock_irqsave(&info->lock, flags);
+	if (tmp_params.mode == MGSL_MODE_BASE_CLOCK)
+		info->base_clock = tmp_params.clock_speed;
+	else
+		memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	program_hw(info);
+
+	return 0;
+}
+
+static int get_txidle(struct slgt_info *info, int __user *idle_mode)
+{
+	DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
+	if (put_user(info->idle_mode, idle_mode))
+		return -EFAULT;
+	return 0;
+}
+
+static int set_txidle(struct slgt_info *info, int idle_mode)
+{
+ 	unsigned long flags;
+	DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
+	spin_lock_irqsave(&info->lock,flags);
+	info->idle_mode = idle_mode;
+	if (info->params.mode != MGSL_MODE_ASYNC)
+		tx_set_idle(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+static int tx_enable(struct slgt_info *info, int enable)
+{
+ 	unsigned long flags;
+	DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
+	spin_lock_irqsave(&info->lock,flags);
+	if (enable) {
+		if (!info->tx_enabled)
+			tx_start(info);
+	} else {
+		if (info->tx_enabled)
+			tx_stop(info);
+	}
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+/*
+ * abort transmit HDLC frame
+ */
+static int tx_abort(struct slgt_info *info)
+{
+ 	unsigned long flags;
+	DBGINFO(("%s tx_abort\n", info->device_name));
+	spin_lock_irqsave(&info->lock,flags);
+	tdma_reset(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+static int rx_enable(struct slgt_info *info, int enable)
+{
+ 	unsigned long flags;
+	unsigned int rbuf_fill_level;
+	DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable));
+	spin_lock_irqsave(&info->lock,flags);
+	/*
+	 * enable[31..16] = receive DMA buffer fill level
+	 * 0 = noop (leave fill level unchanged)
+	 * fill level must be multiple of 4 and <= buffer size
+	 */
+	rbuf_fill_level = ((unsigned int)enable) >> 16;
+	if (rbuf_fill_level) {
+		if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) {
+			spin_unlock_irqrestore(&info->lock, flags);
+			return -EINVAL;
+		}
+		info->rbuf_fill_level = rbuf_fill_level;
+		if (rbuf_fill_level < 128)
+			info->rx_pio = 1; /* PIO mode */
+		else
+			info->rx_pio = 0; /* DMA mode */
+		rx_stop(info); /* restart receiver to use new fill level */
+	}
+
+	/*
+	 * enable[1..0] = receiver enable command
+	 * 0 = disable
+	 * 1 = enable
+	 * 2 = enable or force hunt mode if already enabled
+	 */
+	enable &= 3;
+	if (enable) {
+		if (!info->rx_enabled)
+			rx_start(info);
+		else if (enable == 2) {
+			/* force hunt mode (write 1 to RCR[3]) */
+			wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
+		}
+	} else {
+		if (info->rx_enabled)
+			rx_stop(info);
+	}
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+/*
+ *  wait for specified event to occur
+ */
+static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
+{
+ 	unsigned long flags;
+	int s;
+	int rc=0;
+	struct mgsl_icount cprev, cnow;
+	int events;
+	int mask;
+	struct	_input_signal_events oldsigs, newsigs;
+	DECLARE_WAITQUEUE(wait, current);
+
+	if (get_user(mask, mask_ptr))
+		return -EFAULT;
+
+	DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	/* return immediately if state matches requested events */
+	get_signals(info);
+	s = info->signals;
+
+	events = mask &
+		( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
+ 		  ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
+		  ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
+		  ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
+	if (events) {
+		spin_unlock_irqrestore(&info->lock,flags);
+		goto exit;
+	}
+
+	/* save current irq counts */
+	cprev = info->icount;
+	oldsigs = info->input_signal_events;
+
+	/* enable hunt and idle irqs if needed */
+	if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
+		unsigned short val = rd_reg16(info, SCR);
+		if (!(val & IRQ_RXIDLE))
+			wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
+	}
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&info->event_wait_q, &wait);
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	for(;;) {
+		schedule();
+		if (signal_pending(current)) {
+			rc = -ERESTARTSYS;
+			break;
+		}
+
+		/* get current irq counts */
+		spin_lock_irqsave(&info->lock,flags);
+		cnow = info->icount;
+		newsigs = info->input_signal_events;
+		set_current_state(TASK_INTERRUPTIBLE);
+		spin_unlock_irqrestore(&info->lock,flags);
+
+		/* if no change, wait aborted for some reason */
+		if (newsigs.dsr_up   == oldsigs.dsr_up   &&
+		    newsigs.dsr_down == oldsigs.dsr_down &&
+		    newsigs.dcd_up   == oldsigs.dcd_up   &&
+		    newsigs.dcd_down == oldsigs.dcd_down &&
+		    newsigs.cts_up   == oldsigs.cts_up   &&
+		    newsigs.cts_down == oldsigs.cts_down &&
+		    newsigs.ri_up    == oldsigs.ri_up    &&
+		    newsigs.ri_down  == oldsigs.ri_down  &&
+		    cnow.exithunt    == cprev.exithunt   &&
+		    cnow.rxidle      == cprev.rxidle) {
+			rc = -EIO;
+			break;
+		}
+
+		events = mask &
+			( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
+			  (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
+			  (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
+			  (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
+			  (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
+			  (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
+			  (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
+			  (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
+			  (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
+			  (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
+		if (events)
+			break;
+
+		cprev = cnow;
+		oldsigs = newsigs;
+	}
+
+	remove_wait_queue(&info->event_wait_q, &wait);
+	set_current_state(TASK_RUNNING);
+
+
+	if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
+		spin_lock_irqsave(&info->lock,flags);
+		if (!waitqueue_active(&info->event_wait_q)) {
+			/* disable enable exit hunt mode/idle rcvd IRQs */
+			wr_reg16(info, SCR,
+				(unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
+		}
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+exit:
+	if (rc == 0)
+		rc = put_user(events, mask_ptr);
+	return rc;
+}
+
+static int get_interface(struct slgt_info *info, int __user *if_mode)
+{
+	DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
+	if (put_user(info->if_mode, if_mode))
+		return -EFAULT;
+	return 0;
+}
+
+static int set_interface(struct slgt_info *info, int if_mode)
+{
+ 	unsigned long flags;
+	unsigned short val;
+
+	DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
+	spin_lock_irqsave(&info->lock,flags);
+	info->if_mode = if_mode;
+
+	msc_set_vcr(info);
+
+	/* TCR (tx control) 07  1=RTS driver control */
+	val = rd_reg16(info, TCR);
+	if (info->if_mode & MGSL_INTERFACE_RTS_EN)
+		val |= BIT7;
+	else
+		val &= ~BIT7;
+	wr_reg16(info, TCR, val);
+
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+static int get_xsync(struct slgt_info *info, int __user *xsync)
+{
+	DBGINFO(("%s get_xsync=%x\n", info->device_name, info->xsync));
+	if (put_user(info->xsync, xsync))
+		return -EFAULT;
+	return 0;
+}
+
+/*
+ * set extended sync pattern (1 to 4 bytes) for extended sync mode
+ *
+ * sync pattern is contained in least significant bytes of value
+ * most significant byte of sync pattern is oldest (1st sent/detected)
+ */
+static int set_xsync(struct slgt_info *info, int xsync)
+{
+	unsigned long flags;
+
+	DBGINFO(("%s set_xsync=%x)\n", info->device_name, xsync));
+	spin_lock_irqsave(&info->lock, flags);
+	info->xsync = xsync;
+	wr_reg32(info, XSR, xsync);
+	spin_unlock_irqrestore(&info->lock, flags);
+	return 0;
+}
+
+static int get_xctrl(struct slgt_info *info, int __user *xctrl)
+{
+	DBGINFO(("%s get_xctrl=%x\n", info->device_name, info->xctrl));
+	if (put_user(info->xctrl, xctrl))
+		return -EFAULT;
+	return 0;
+}
+
+/*
+ * set extended control options
+ *
+ * xctrl[31:19] reserved, must be zero
+ * xctrl[18:17] extended sync pattern length in bytes
+ *              00 = 1 byte  in xsr[7:0]
+ *              01 = 2 bytes in xsr[15:0]
+ *              10 = 3 bytes in xsr[23:0]
+ *              11 = 4 bytes in xsr[31:0]
+ * xctrl[16]    1 = enable terminal count, 0=disabled
+ * xctrl[15:0]  receive terminal count for fixed length packets
+ *              value is count minus one (0 = 1 byte packet)
+ *              when terminal count is reached, receiver
+ *              automatically returns to hunt mode and receive
+ *              FIFO contents are flushed to DMA buffers with
+ *              end of frame (EOF) status
+ */
+static int set_xctrl(struct slgt_info *info, int xctrl)
+{
+	unsigned long flags;
+
+	DBGINFO(("%s set_xctrl=%x)\n", info->device_name, xctrl));
+	spin_lock_irqsave(&info->lock, flags);
+	info->xctrl = xctrl;
+	wr_reg32(info, XCR, xctrl);
+	spin_unlock_irqrestore(&info->lock, flags);
+	return 0;
+}
+
+/*
+ * set general purpose IO pin state and direction
+ *
+ * user_gpio fields:
+ * state   each bit indicates a pin state
+ * smask   set bit indicates pin state to set
+ * dir     each bit indicates a pin direction (0=input, 1=output)
+ * dmask   set bit indicates pin direction to set
+ */
+static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
+{
+ 	unsigned long flags;
+	struct gpio_desc gpio;
+	__u32 data;
+
+	if (!info->gpio_present)
+		return -EINVAL;
+	if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
+		return -EFAULT;
+	DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
+		 info->device_name, gpio.state, gpio.smask,
+		 gpio.dir, gpio.dmask));
+
+	spin_lock_irqsave(&info->port_array[0]->lock, flags);
+	if (gpio.dmask) {
+		data = rd_reg32(info, IODR);
+		data |= gpio.dmask & gpio.dir;
+		data &= ~(gpio.dmask & ~gpio.dir);
+		wr_reg32(info, IODR, data);
+	}
+	if (gpio.smask) {
+		data = rd_reg32(info, IOVR);
+		data |= gpio.smask & gpio.state;
+		data &= ~(gpio.smask & ~gpio.state);
+		wr_reg32(info, IOVR, data);
+	}
+	spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
+
+	return 0;
+}
+
+/*
+ * get general purpose IO pin state and direction
+ */
+static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
+{
+	struct gpio_desc gpio;
+	if (!info->gpio_present)
+		return -EINVAL;
+	gpio.state = rd_reg32(info, IOVR);
+	gpio.smask = 0xffffffff;
+	gpio.dir   = rd_reg32(info, IODR);
+	gpio.dmask = 0xffffffff;
+	if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
+		return -EFAULT;
+	DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
+		 info->device_name, gpio.state, gpio.dir));
+	return 0;
+}
+
+/*
+ * conditional wait facility
+ */
+static void init_cond_wait(struct cond_wait *w, unsigned int data)
+{
+	init_waitqueue_head(&w->q);
+	init_waitqueue_entry(&w->wait, current);
+	w->data = data;
+}
+
+static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
+{
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&w->q, &w->wait);
+	w->next = *head;
+	*head = w;
+}
+
+static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
+{
+	struct cond_wait *w, *prev;
+	remove_wait_queue(&cw->q, &cw->wait);
+	set_current_state(TASK_RUNNING);
+	for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
+		if (w == cw) {
+			if (prev != NULL)
+				prev->next = w->next;
+			else
+				*head = w->next;
+			break;
+		}
+	}
+}
+
+static void flush_cond_wait(struct cond_wait **head)
+{
+	while (*head != NULL) {
+		wake_up_interruptible(&(*head)->q);
+		*head = (*head)->next;
+	}
+}
+
+/*
+ * wait for general purpose I/O pin(s) to enter specified state
+ *
+ * user_gpio fields:
+ * state - bit indicates target pin state
+ * smask - set bit indicates watched pin
+ *
+ * The wait ends when at least one watched pin enters the specified
+ * state. When 0 (no error) is returned, user_gpio->state is set to the
+ * state of all GPIO pins when the wait ends.
+ *
+ * Note: Each pin may be a dedicated input, dedicated output, or
+ * configurable input/output. The number and configuration of pins
+ * varies with the specific adapter model. Only input pins (dedicated
+ * or configured) can be monitored with this function.
+ */
+static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
+{
+ 	unsigned long flags;
+	int rc = 0;
+	struct gpio_desc gpio;
+	struct cond_wait wait;
+	u32 state;
+
+	if (!info->gpio_present)
+		return -EINVAL;
+	if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
+		return -EFAULT;
+	DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
+		 info->device_name, gpio.state, gpio.smask));
+	/* ignore output pins identified by set IODR bit */
+	if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
+		return -EINVAL;
+	init_cond_wait(&wait, gpio.smask);
+
+	spin_lock_irqsave(&info->port_array[0]->lock, flags);
+	/* enable interrupts for watched pins */
+	wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
+	/* get current pin states */
+	state = rd_reg32(info, IOVR);
+
+	if (gpio.smask & ~(state ^ gpio.state)) {
+		/* already in target state */
+		gpio.state = state;
+	} else {
+		/* wait for target state */
+		add_cond_wait(&info->gpio_wait_q, &wait);
+		spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
+		schedule();
+		if (signal_pending(current))
+			rc = -ERESTARTSYS;
+		else
+			gpio.state = wait.data;
+		spin_lock_irqsave(&info->port_array[0]->lock, flags);
+		remove_cond_wait(&info->gpio_wait_q, &wait);
+	}
+
+	/* disable all GPIO interrupts if no waiting processes */
+	if (info->gpio_wait_q == NULL)
+		wr_reg32(info, IOER, 0);
+	spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
+
+	if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
+		rc = -EFAULT;
+	return rc;
+}
+
+static int modem_input_wait(struct slgt_info *info,int arg)
+{
+ 	unsigned long flags;
+	int rc;
+	struct mgsl_icount cprev, cnow;
+	DECLARE_WAITQUEUE(wait, current);
+
+	/* save current irq counts */
+	spin_lock_irqsave(&info->lock,flags);
+	cprev = info->icount;
+	add_wait_queue(&info->status_event_wait_q, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	for(;;) {
+		schedule();
+		if (signal_pending(current)) {
+			rc = -ERESTARTSYS;
+			break;
+		}
+
+		/* get new irq counts */
+		spin_lock_irqsave(&info->lock,flags);
+		cnow = info->icount;
+		set_current_state(TASK_INTERRUPTIBLE);
+		spin_unlock_irqrestore(&info->lock,flags);
+
+		/* if no change, wait aborted for some reason */
+		if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+		    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
+			rc = -EIO;
+			break;
+		}
+
+		/* check for change in caller specified modem input */
+		if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
+		    (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
+		    (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
+		    (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
+			rc = 0;
+			break;
+		}
+
+		cprev = cnow;
+	}
+	remove_wait_queue(&info->status_event_wait_q, &wait);
+	set_current_state(TASK_RUNNING);
+	return rc;
+}
+
+/*
+ *  return state of serial control and status signals
+ */
+static int tiocmget(struct tty_struct *tty)
+{
+	struct slgt_info *info = tty->driver_data;
+	unsigned int result;
+ 	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+ 	get_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
+		((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
+		((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
+		((info->signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
+		((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
+		((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
+
+	DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
+	return result;
+}
+
+/*
+ * set modem control signals (DTR/RTS)
+ *
+ * 	cmd	signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
+ *		TIOCMSET = set/clear signal values
+ * 	value	bit mask for command
+ */
+static int tiocmset(struct tty_struct *tty,
+		    unsigned int set, unsigned int clear)
+{
+	struct slgt_info *info = tty->driver_data;
+ 	unsigned long flags;
+
+	DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
+
+	if (set & TIOCM_RTS)
+		info->signals |= SerialSignal_RTS;
+	if (set & TIOCM_DTR)
+		info->signals |= SerialSignal_DTR;
+	if (clear & TIOCM_RTS)
+		info->signals &= ~SerialSignal_RTS;
+	if (clear & TIOCM_DTR)
+		info->signals &= ~SerialSignal_DTR;
+
+	spin_lock_irqsave(&info->lock,flags);
+ 	set_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+static int carrier_raised(struct tty_port *port)
+{
+	unsigned long flags;
+	struct slgt_info *info = container_of(port, struct slgt_info, port);
+
+	spin_lock_irqsave(&info->lock,flags);
+ 	get_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+	return (info->signals & SerialSignal_DCD) ? 1 : 0;
+}
+
+static void dtr_rts(struct tty_port *port, int on)
+{
+	unsigned long flags;
+	struct slgt_info *info = container_of(port, struct slgt_info, port);
+
+	spin_lock_irqsave(&info->lock,flags);
+	if (on)
+		info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ 	set_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+
+/*
+ *  block current process until the device is ready to open
+ */
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+			   struct slgt_info *info)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	int		retval;
+	bool		do_clocal = false;
+	bool		extra_count = false;
+	unsigned long	flags;
+	int		cd;
+	struct tty_port *port = &info->port;
+
+	DBGINFO(("%s block_til_ready\n", tty->driver->name));
+
+	if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
+		/* nonblock mode is set or port is not enabled */
+		port->flags |= ASYNC_NORMAL_ACTIVE;
+		return 0;
+	}
+
+	if (tty->termios->c_cflag & CLOCAL)
+		do_clocal = true;
+
+	/* Wait for carrier detect and the line to become
+	 * free (i.e., not in use by the callout).  While we are in
+	 * this loop, port->count is dropped by one, so that
+	 * close() knows when to free things.  We restore it upon
+	 * exit, either normal or abnormal.
+	 */
+
+	retval = 0;
+	add_wait_queue(&port->open_wait, &wait);
+
+	spin_lock_irqsave(&info->lock, flags);
+	if (!tty_hung_up_p(filp)) {
+		extra_count = true;
+		port->count--;
+	}
+	spin_unlock_irqrestore(&info->lock, flags);
+	port->blocked_open++;
+
+	while (1) {
+		if ((tty->termios->c_cflag & CBAUD))
+			tty_port_raise_dtr_rts(port);
+
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
+			retval = (port->flags & ASYNC_HUP_NOTIFY) ?
+					-EAGAIN : -ERESTARTSYS;
+			break;
+		}
+
+		cd = tty_port_carrier_raised(port);
+
+ 		if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd ))
+ 			break;
+
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			break;
+		}
+
+		DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
+		tty_unlock();
+		schedule();
+		tty_lock();
+	}
+
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&port->open_wait, &wait);
+
+	if (extra_count)
+		port->count++;
+	port->blocked_open--;
+
+	if (!retval)
+		port->flags |= ASYNC_NORMAL_ACTIVE;
+
+	DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
+	return retval;
+}
+
+static int alloc_tmp_rbuf(struct slgt_info *info)
+{
+	info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
+	if (info->tmp_rbuf == NULL)
+		return -ENOMEM;
+	return 0;
+}
+
+static void free_tmp_rbuf(struct slgt_info *info)
+{
+	kfree(info->tmp_rbuf);
+	info->tmp_rbuf = NULL;
+}
+
+/*
+ * allocate DMA descriptor lists.
+ */
+static int alloc_desc(struct slgt_info *info)
+{
+	unsigned int i;
+	unsigned int pbufs;
+
+	/* allocate memory to hold descriptor lists */
+	info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
+	if (info->bufs == NULL)
+		return -ENOMEM;
+
+	memset(info->bufs, 0, DESC_LIST_SIZE);
+
+	info->rbufs = (struct slgt_desc*)info->bufs;
+	info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
+
+	pbufs = (unsigned int)info->bufs_dma_addr;
+
+	/*
+	 * Build circular lists of descriptors
+	 */
+
+	for (i=0; i < info->rbuf_count; i++) {
+		/* physical address of this descriptor */
+		info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
+
+		/* physical address of next descriptor */
+		if (i == info->rbuf_count - 1)
+			info->rbufs[i].next = cpu_to_le32(pbufs);
+		else
+			info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
+		set_desc_count(info->rbufs[i], DMABUFSIZE);
+	}
+
+	for (i=0; i < info->tbuf_count; i++) {
+		/* physical address of this descriptor */
+		info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
+
+		/* physical address of next descriptor */
+		if (i == info->tbuf_count - 1)
+			info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
+		else
+			info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
+	}
+
+	return 0;
+}
+
+static void free_desc(struct slgt_info *info)
+{
+	if (info->bufs != NULL) {
+		pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
+		info->bufs  = NULL;
+		info->rbufs = NULL;
+		info->tbufs = NULL;
+	}
+}
+
+static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
+{
+	int i;
+	for (i=0; i < count; i++) {
+		if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
+			return -ENOMEM;
+		bufs[i].pbuf  = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
+	}
+	return 0;
+}
+
+static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
+{
+	int i;
+	for (i=0; i < count; i++) {
+		if (bufs[i].buf == NULL)
+			continue;
+		pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
+		bufs[i].buf = NULL;
+	}
+}
+
+static int alloc_dma_bufs(struct slgt_info *info)
+{
+	info->rbuf_count = 32;
+	info->tbuf_count = 32;
+
+	if (alloc_desc(info) < 0 ||
+	    alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
+	    alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
+	    alloc_tmp_rbuf(info) < 0) {
+		DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
+		return -ENOMEM;
+	}
+	reset_rbufs(info);
+	return 0;
+}
+
+static void free_dma_bufs(struct slgt_info *info)
+{
+	if (info->bufs) {
+		free_bufs(info, info->rbufs, info->rbuf_count);
+		free_bufs(info, info->tbufs, info->tbuf_count);
+		free_desc(info);
+	}
+	free_tmp_rbuf(info);
+}
+
+static int claim_resources(struct slgt_info *info)
+{
+	if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
+		DBGERR(("%s reg addr conflict, addr=%08X\n",
+			info->device_name, info->phys_reg_addr));
+		info->init_error = DiagStatus_AddressConflict;
+		goto errout;
+	}
+	else
+		info->reg_addr_requested = true;
+
+	info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
+	if (!info->reg_addr) {
+		DBGERR(("%s cant map device registers, addr=%08X\n",
+			info->device_name, info->phys_reg_addr));
+		info->init_error = DiagStatus_CantAssignPciResources;
+		goto errout;
+	}
+	return 0;
+
+errout:
+	release_resources(info);
+	return -ENODEV;
+}
+
+static void release_resources(struct slgt_info *info)
+{
+	if (info->irq_requested) {
+		free_irq(info->irq_level, info);
+		info->irq_requested = false;
+	}
+
+	if (info->reg_addr_requested) {
+		release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
+		info->reg_addr_requested = false;
+	}
+
+	if (info->reg_addr) {
+		iounmap(info->reg_addr);
+		info->reg_addr = NULL;
+	}
+}
+
+/* Add the specified device instance data structure to the
+ * global linked list of devices and increment the device count.
+ */
+static void add_device(struct slgt_info *info)
+{
+	char *devstr;
+
+	info->next_device = NULL;
+	info->line = slgt_device_count;
+	sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
+
+	if (info->line < MAX_DEVICES) {
+		if (maxframe[info->line])
+			info->max_frame_size = maxframe[info->line];
+	}
+
+	slgt_device_count++;
+
+	if (!slgt_device_list)
+		slgt_device_list = info;
+	else {
+		struct slgt_info *current_dev = slgt_device_list;
+		while(current_dev->next_device)
+			current_dev = current_dev->next_device;
+		current_dev->next_device = info;
+	}
+
+	if (info->max_frame_size < 4096)
+		info->max_frame_size = 4096;
+	else if (info->max_frame_size > 65535)
+		info->max_frame_size = 65535;
+
+	switch(info->pdev->device) {
+	case SYNCLINK_GT_DEVICE_ID:
+		devstr = "GT";
+		break;
+	case SYNCLINK_GT2_DEVICE_ID:
+		devstr = "GT2";
+		break;
+	case SYNCLINK_GT4_DEVICE_ID:
+		devstr = "GT4";
+		break;
+	case SYNCLINK_AC_DEVICE_ID:
+		devstr = "AC";
+		info->params.mode = MGSL_MODE_ASYNC;
+		break;
+	default:
+		devstr = "(unknown model)";
+	}
+	printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
+		devstr, info->device_name, info->phys_reg_addr,
+		info->irq_level, info->max_frame_size);
+
+#if SYNCLINK_GENERIC_HDLC
+	hdlcdev_init(info);
+#endif
+}
+
+static const struct tty_port_operations slgt_port_ops = {
+	.carrier_raised = carrier_raised,
+	.dtr_rts = dtr_rts,
+};
+
+/*
+ *  allocate device instance structure, return NULL on failure
+ */
+static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
+{
+	struct slgt_info *info;
+
+	info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL);
+
+	if (!info) {
+		DBGERR(("%s device alloc failed adapter=%d port=%d\n",
+			driver_name, adapter_num, port_num));
+	} else {
+		tty_port_init(&info->port);
+		info->port.ops = &slgt_port_ops;
+		info->magic = MGSL_MAGIC;
+		INIT_WORK(&info->task, bh_handler);
+		info->max_frame_size = 4096;
+		info->base_clock = 14745600;
+		info->rbuf_fill_level = DMABUFSIZE;
+		info->port.close_delay = 5*HZ/10;
+		info->port.closing_wait = 30*HZ;
+		init_waitqueue_head(&info->status_event_wait_q);
+		init_waitqueue_head(&info->event_wait_q);
+		spin_lock_init(&info->netlock);
+		memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
+		info->idle_mode = HDLC_TXIDLE_FLAGS;
+		info->adapter_num = adapter_num;
+		info->port_num = port_num;
+
+		setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
+		setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info);
+
+		/* Copy configuration info to device instance data */
+		info->pdev = pdev;
+		info->irq_level = pdev->irq;
+		info->phys_reg_addr = pci_resource_start(pdev,0);
+
+		info->bus_type = MGSL_BUS_TYPE_PCI;
+		info->irq_flags = IRQF_SHARED;
+
+		info->init_error = -1; /* assume error, set to 0 on successful init */
+	}
+
+	return info;
+}
+
+static void device_init(int adapter_num, struct pci_dev *pdev)
+{
+	struct slgt_info *port_array[SLGT_MAX_PORTS];
+	int i;
+	int port_count = 1;
+
+	if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
+		port_count = 2;
+	else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
+		port_count = 4;
+
+	/* allocate device instances for all ports */
+	for (i=0; i < port_count; ++i) {
+		port_array[i] = alloc_dev(adapter_num, i, pdev);
+		if (port_array[i] == NULL) {
+			for (--i; i >= 0; --i)
+				kfree(port_array[i]);
+			return;
+		}
+	}
+
+	/* give copy of port_array to all ports and add to device list  */
+	for (i=0; i < port_count; ++i) {
+		memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
+		add_device(port_array[i]);
+		port_array[i]->port_count = port_count;
+		spin_lock_init(&port_array[i]->lock);
+	}
+
+	/* Allocate and claim adapter resources */
+	if (!claim_resources(port_array[0])) {
+
+		alloc_dma_bufs(port_array[0]);
+
+		/* copy resource information from first port to others */
+		for (i = 1; i < port_count; ++i) {
+			port_array[i]->irq_level = port_array[0]->irq_level;
+			port_array[i]->reg_addr  = port_array[0]->reg_addr;
+			alloc_dma_bufs(port_array[i]);
+		}
+
+		if (request_irq(port_array[0]->irq_level,
+					slgt_interrupt,
+					port_array[0]->irq_flags,
+					port_array[0]->device_name,
+					port_array[0]) < 0) {
+			DBGERR(("%s request_irq failed IRQ=%d\n",
+				port_array[0]->device_name,
+				port_array[0]->irq_level));
+		} else {
+			port_array[0]->irq_requested = true;
+			adapter_test(port_array[0]);
+			for (i=1 ; i < port_count ; i++) {
+				port_array[i]->init_error = port_array[0]->init_error;
+				port_array[i]->gpio_present = port_array[0]->gpio_present;
+			}
+		}
+	}
+
+	for (i=0; i < port_count; ++i)
+		tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
+}
+
+static int __devinit init_one(struct pci_dev *dev,
+			      const struct pci_device_id *ent)
+{
+	if (pci_enable_device(dev)) {
+		printk("error enabling pci device %p\n", dev);
+		return -EIO;
+	}
+	pci_set_master(dev);
+	device_init(slgt_device_count, dev);
+	return 0;
+}
+
+static void __devexit remove_one(struct pci_dev *dev)
+{
+}
+
+static const struct tty_operations ops = {
+	.open = open,
+	.close = close,
+	.write = write,
+	.put_char = put_char,
+	.flush_chars = flush_chars,
+	.write_room = write_room,
+	.chars_in_buffer = chars_in_buffer,
+	.flush_buffer = flush_buffer,
+	.ioctl = ioctl,
+	.compat_ioctl = slgt_compat_ioctl,
+	.throttle = throttle,
+	.unthrottle = unthrottle,
+	.send_xchar = send_xchar,
+	.break_ctl = set_break,
+	.wait_until_sent = wait_until_sent,
+	.set_termios = set_termios,
+	.stop = tx_hold,
+	.start = tx_release,
+	.hangup = hangup,
+	.tiocmget = tiocmget,
+	.tiocmset = tiocmset,
+	.get_icount = get_icount,
+	.proc_fops = &synclink_gt_proc_fops,
+};
+
+static void slgt_cleanup(void)
+{
+	int rc;
+	struct slgt_info *info;
+	struct slgt_info *tmp;
+
+	printk(KERN_INFO "unload %s\n", driver_name);
+
+	if (serial_driver) {
+		for (info=slgt_device_list ; info != NULL ; info=info->next_device)
+			tty_unregister_device(serial_driver, info->line);
+		if ((rc = tty_unregister_driver(serial_driver)))
+			DBGERR(("tty_unregister_driver error=%d\n", rc));
+		put_tty_driver(serial_driver);
+	}
+
+	/* reset devices */
+	info = slgt_device_list;
+	while(info) {
+		reset_port(info);
+		info = info->next_device;
+	}
+
+	/* release devices */
+	info = slgt_device_list;
+	while(info) {
+#if SYNCLINK_GENERIC_HDLC
+		hdlcdev_exit(info);
+#endif
+		free_dma_bufs(info);
+		free_tmp_rbuf(info);
+		if (info->port_num == 0)
+			release_resources(info);
+		tmp = info;
+		info = info->next_device;
+		kfree(tmp);
+	}
+
+	if (pci_registered)
+		pci_unregister_driver(&pci_driver);
+}
+
+/*
+ *  Driver initialization entry point.
+ */
+static int __init slgt_init(void)
+{
+	int rc;
+
+	printk(KERN_INFO "%s\n", driver_name);
+
+	serial_driver = alloc_tty_driver(MAX_DEVICES);
+	if (!serial_driver) {
+		printk("%s can't allocate tty driver\n", driver_name);
+		return -ENOMEM;
+	}
+
+	/* Initialize the tty_driver structure */
+
+	serial_driver->owner = THIS_MODULE;
+	serial_driver->driver_name = tty_driver_name;
+	serial_driver->name = tty_dev_prefix;
+	serial_driver->major = ttymajor;
+	serial_driver->minor_start = 64;
+	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	serial_driver->subtype = SERIAL_TYPE_NORMAL;
+	serial_driver->init_termios = tty_std_termios;
+	serial_driver->init_termios.c_cflag =
+		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	serial_driver->init_termios.c_ispeed = 9600;
+	serial_driver->init_termios.c_ospeed = 9600;
+	serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	tty_set_operations(serial_driver, &ops);
+	if ((rc = tty_register_driver(serial_driver)) < 0) {
+		DBGERR(("%s can't register serial driver\n", driver_name));
+		put_tty_driver(serial_driver);
+		serial_driver = NULL;
+		goto error;
+	}
+
+	printk(KERN_INFO "%s, tty major#%d\n",
+	       driver_name, serial_driver->major);
+
+	slgt_device_count = 0;
+	if ((rc = pci_register_driver(&pci_driver)) < 0) {
+		printk("%s pci_register_driver error=%d\n", driver_name, rc);
+		goto error;
+	}
+	pci_registered = true;
+
+	if (!slgt_device_list)
+		printk("%s no devices found\n",driver_name);
+
+	return 0;
+
+error:
+	slgt_cleanup();
+	return rc;
+}
+
+static void __exit slgt_exit(void)
+{
+	slgt_cleanup();
+}
+
+module_init(slgt_init);
+module_exit(slgt_exit);
+
+/*
+ * register access routines
+ */
+
+#define CALC_REGADDR() \
+	unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
+	if (addr >= 0x80) \
+		reg_addr += (info->port_num) * 32; \
+	else if (addr >= 0x40)	\
+		reg_addr += (info->port_num) * 16;
+
+static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
+{
+	CALC_REGADDR();
+	return readb((void __iomem *)reg_addr);
+}
+
+static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
+{
+	CALC_REGADDR();
+	writeb(value, (void __iomem *)reg_addr);
+}
+
+static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
+{
+	CALC_REGADDR();
+	return readw((void __iomem *)reg_addr);
+}
+
+static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
+{
+	CALC_REGADDR();
+	writew(value, (void __iomem *)reg_addr);
+}
+
+static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
+{
+	CALC_REGADDR();
+	return readl((void __iomem *)reg_addr);
+}
+
+static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
+{
+	CALC_REGADDR();
+	writel(value, (void __iomem *)reg_addr);
+}
+
+static void rdma_reset(struct slgt_info *info)
+{
+	unsigned int i;
+
+	/* set reset bit */
+	wr_reg32(info, RDCSR, BIT1);
+
+	/* wait for enable bit cleared */
+	for(i=0 ; i < 1000 ; i++)
+		if (!(rd_reg32(info, RDCSR) & BIT0))
+			break;
+}
+
+static void tdma_reset(struct slgt_info *info)
+{
+	unsigned int i;
+
+	/* set reset bit */
+	wr_reg32(info, TDCSR, BIT1);
+
+	/* wait for enable bit cleared */
+	for(i=0 ; i < 1000 ; i++)
+		if (!(rd_reg32(info, TDCSR) & BIT0))
+			break;
+}
+
+/*
+ * enable internal loopback
+ * TxCLK and RxCLK are generated from BRG
+ * and TxD is looped back to RxD internally.
+ */
+static void enable_loopback(struct slgt_info *info)
+{
+	/* SCR (serial control) BIT2=looopback enable */
+	wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
+
+	if (info->params.mode != MGSL_MODE_ASYNC) {
+		/* CCR (clock control)
+		 * 07..05  tx clock source (010 = BRG)
+		 * 04..02  rx clock source (010 = BRG)
+		 * 01      auxclk enable   (0 = disable)
+		 * 00      BRG enable      (1 = enable)
+		 *
+		 * 0100 1001
+		 */
+		wr_reg8(info, CCR, 0x49);
+
+		/* set speed if available, otherwise use default */
+		if (info->params.clock_speed)
+			set_rate(info, info->params.clock_speed);
+		else
+			set_rate(info, 3686400);
+	}
+}
+
+/*
+ *  set baud rate generator to specified rate
+ */
+static void set_rate(struct slgt_info *info, u32 rate)
+{
+	unsigned int div;
+	unsigned int osc = info->base_clock;
+
+	/* div = osc/rate - 1
+	 *
+	 * Round div up if osc/rate is not integer to
+	 * force to next slowest rate.
+	 */
+
+	if (rate) {
+		div = osc/rate;
+		if (!(osc % rate) && div)
+			div--;
+		wr_reg16(info, BDR, (unsigned short)div);
+	}
+}
+
+static void rx_stop(struct slgt_info *info)
+{
+	unsigned short val;
+
+	/* disable and reset receiver */
+	val = rd_reg16(info, RCR) & ~BIT1;          /* clear enable bit */
+	wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
+	wr_reg16(info, RCR, val);                  /* clear reset bit */
+
+	slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
+
+	/* clear pending rx interrupts */
+	wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
+
+	rdma_reset(info);
+
+	info->rx_enabled = false;
+	info->rx_restart = false;
+}
+
+static void rx_start(struct slgt_info *info)
+{
+	unsigned short val;
+
+	slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
+
+	/* clear pending rx overrun IRQ */
+	wr_reg16(info, SSR, IRQ_RXOVER);
+
+	/* reset and disable receiver */
+	val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
+	wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
+	wr_reg16(info, RCR, val);                  /* clear reset bit */
+
+	rdma_reset(info);
+	reset_rbufs(info);
+
+	if (info->rx_pio) {
+		/* rx request when rx FIFO not empty */
+		wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14));
+		slgt_irq_on(info, IRQ_RXDATA);
+		if (info->params.mode == MGSL_MODE_ASYNC) {
+			/* enable saving of rx status */
+			wr_reg32(info, RDCSR, BIT6);
+		}
+	} else {
+		/* rx request when rx FIFO half full */
+		wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14));
+		/* set 1st descriptor address */
+		wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
+
+		if (info->params.mode != MGSL_MODE_ASYNC) {
+			/* enable rx DMA and DMA interrupt */
+			wr_reg32(info, RDCSR, (BIT2 + BIT0));
+		} else {
+			/* enable saving of rx status, rx DMA and DMA interrupt */
+			wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
+		}
+	}
+
+	slgt_irq_on(info, IRQ_RXOVER);
+
+	/* enable receiver */
+	wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
+
+	info->rx_restart = false;
+	info->rx_enabled = true;
+}
+
+static void tx_start(struct slgt_info *info)
+{
+	if (!info->tx_enabled) {
+		wr_reg16(info, TCR,
+			 (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
+		info->tx_enabled = true;
+	}
+
+	if (desc_count(info->tbufs[info->tbuf_start])) {
+		info->drop_rts_on_tx_done = false;
+
+		if (info->params.mode != MGSL_MODE_ASYNC) {
+			if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
+				get_signals(info);
+				if (!(info->signals & SerialSignal_RTS)) {
+					info->signals |= SerialSignal_RTS;
+					set_signals(info);
+					info->drop_rts_on_tx_done = true;
+				}
+			}
+
+			slgt_irq_off(info, IRQ_TXDATA);
+			slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
+			/* clear tx idle and underrun status bits */
+			wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
+		} else {
+			slgt_irq_off(info, IRQ_TXDATA);
+			slgt_irq_on(info, IRQ_TXIDLE);
+			/* clear tx idle status bit */
+			wr_reg16(info, SSR, IRQ_TXIDLE);
+		}
+		/* set 1st descriptor address and start DMA */
+		wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
+		wr_reg32(info, TDCSR, BIT2 + BIT0);
+		info->tx_active = true;
+	}
+}
+
+static void tx_stop(struct slgt_info *info)
+{
+	unsigned short val;
+
+	del_timer(&info->tx_timer);
+
+	tdma_reset(info);
+
+	/* reset and disable transmitter */
+	val = rd_reg16(info, TCR) & ~BIT1;          /* clear enable bit */
+	wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
+
+	slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
+
+	/* clear tx idle and underrun status bit */
+	wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
+
+	reset_tbufs(info);
+
+	info->tx_enabled = false;
+	info->tx_active = false;
+}
+
+static void reset_port(struct slgt_info *info)
+{
+	if (!info->reg_addr)
+		return;
+
+	tx_stop(info);
+	rx_stop(info);
+
+	info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+	set_signals(info);
+
+	slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
+}
+
+static void reset_adapter(struct slgt_info *info)
+{
+	int i;
+	for (i=0; i < info->port_count; ++i) {
+		if (info->port_array[i])
+			reset_port(info->port_array[i]);
+	}
+}
+
+static void async_mode(struct slgt_info *info)
+{
+  	unsigned short val;
+
+	slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
+	tx_stop(info);
+	rx_stop(info);
+
+	/* TCR (tx control)
+	 *
+	 * 15..13  mode, 010=async
+	 * 12..10  encoding, 000=NRZ
+	 * 09      parity enable
+	 * 08      1=odd parity, 0=even parity
+	 * 07      1=RTS driver control
+	 * 06      1=break enable
+	 * 05..04  character length
+	 *         00=5 bits
+	 *         01=6 bits
+	 *         10=7 bits
+	 *         11=8 bits
+	 * 03      0=1 stop bit, 1=2 stop bits
+	 * 02      reset
+	 * 01      enable
+	 * 00      auto-CTS enable
+	 */
+	val = 0x4000;
+
+	if (info->if_mode & MGSL_INTERFACE_RTS_EN)
+		val |= BIT7;
+
+	if (info->params.parity != ASYNC_PARITY_NONE) {
+		val |= BIT9;
+		if (info->params.parity == ASYNC_PARITY_ODD)
+			val |= BIT8;
+	}
+
+	switch (info->params.data_bits)
+	{
+	case 6: val |= BIT4; break;
+	case 7: val |= BIT5; break;
+	case 8: val |= BIT5 + BIT4; break;
+	}
+
+	if (info->params.stop_bits != 1)
+		val |= BIT3;
+
+	if (info->params.flags & HDLC_FLAG_AUTO_CTS)
+		val |= BIT0;
+
+	wr_reg16(info, TCR, val);
+
+	/* RCR (rx control)
+	 *
+	 * 15..13  mode, 010=async
+	 * 12..10  encoding, 000=NRZ
+	 * 09      parity enable
+	 * 08      1=odd parity, 0=even parity
+	 * 07..06  reserved, must be 0
+	 * 05..04  character length
+	 *         00=5 bits
+	 *         01=6 bits
+	 *         10=7 bits
+	 *         11=8 bits
+	 * 03      reserved, must be zero
+	 * 02      reset
+	 * 01      enable
+	 * 00      auto-DCD enable
+	 */
+	val = 0x4000;
+
+	if (info->params.parity != ASYNC_PARITY_NONE) {
+		val |= BIT9;
+		if (info->params.parity == ASYNC_PARITY_ODD)
+			val |= BIT8;
+	}
+
+	switch (info->params.data_bits)
+	{
+	case 6: val |= BIT4; break;
+	case 7: val |= BIT5; break;
+	case 8: val |= BIT5 + BIT4; break;
+	}
+
+	if (info->params.flags & HDLC_FLAG_AUTO_DCD)
+		val |= BIT0;
+
+	wr_reg16(info, RCR, val);
+
+	/* CCR (clock control)
+	 *
+	 * 07..05  011 = tx clock source is BRG/16
+	 * 04..02  010 = rx clock source is BRG
+	 * 01      0 = auxclk disabled
+	 * 00      1 = BRG enabled
+	 *
+	 * 0110 1001
+	 */
+	wr_reg8(info, CCR, 0x69);
+
+	msc_set_vcr(info);
+
+	/* SCR (serial control)
+	 *
+	 * 15  1=tx req on FIFO half empty
+	 * 14  1=rx req on FIFO half full
+	 * 13  tx data  IRQ enable
+	 * 12  tx idle  IRQ enable
+	 * 11  rx break on IRQ enable
+	 * 10  rx data  IRQ enable
+	 * 09  rx break off IRQ enable
+	 * 08  overrun  IRQ enable
+	 * 07  DSR      IRQ enable
+	 * 06  CTS      IRQ enable
+	 * 05  DCD      IRQ enable
+	 * 04  RI       IRQ enable
+	 * 03  0=16x sampling, 1=8x sampling
+	 * 02  1=txd->rxd internal loopback enable
+	 * 01  reserved, must be zero
+	 * 00  1=master IRQ enable
+	 */
+	val = BIT15 + BIT14 + BIT0;
+	/* JCR[8] : 1 = x8 async mode feature available */
+	if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate &&
+	    ((info->base_clock < (info->params.data_rate * 16)) ||
+	     (info->base_clock % (info->params.data_rate * 16)))) {
+		/* use 8x sampling */
+		val |= BIT3;
+		set_rate(info, info->params.data_rate * 8);
+	} else {
+		/* use 16x sampling */
+		set_rate(info, info->params.data_rate * 16);
+	}
+	wr_reg16(info, SCR, val);
+
+	slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
+
+	if (info->params.loopback)
+		enable_loopback(info);
+}
+
+static void sync_mode(struct slgt_info *info)
+{
+	unsigned short val;
+
+	slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
+	tx_stop(info);
+	rx_stop(info);
+
+	/* TCR (tx control)
+	 *
+	 * 15..13  mode
+	 *         000=HDLC/SDLC
+	 *         001=raw bit synchronous
+	 *         010=asynchronous/isochronous
+	 *         011=monosync byte synchronous
+	 *         100=bisync byte synchronous
+	 *         101=xsync byte synchronous
+	 * 12..10  encoding
+	 * 09      CRC enable
+	 * 08      CRC32
+	 * 07      1=RTS driver control
+	 * 06      preamble enable
+	 * 05..04  preamble length
+	 * 03      share open/close flag
+	 * 02      reset
+	 * 01      enable
+	 * 00      auto-CTS enable
+	 */
+	val = BIT2;
+
+	switch(info->params.mode) {
+	case MGSL_MODE_XSYNC:
+		val |= BIT15 + BIT13;
+		break;
+	case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
+	case MGSL_MODE_BISYNC:   val |= BIT15; break;
+	case MGSL_MODE_RAW:      val |= BIT13; break;
+	}
+	if (info->if_mode & MGSL_INTERFACE_RTS_EN)
+		val |= BIT7;
+
+	switch(info->params.encoding)
+	{
+	case HDLC_ENCODING_NRZB:          val |= BIT10; break;
+	case HDLC_ENCODING_NRZI_MARK:     val |= BIT11; break;
+	case HDLC_ENCODING_NRZI:          val |= BIT11 + BIT10; break;
+	case HDLC_ENCODING_BIPHASE_MARK:  val |= BIT12; break;
+	case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
+	case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
+	case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
+	}
+
+	switch (info->params.crc_type & HDLC_CRC_MASK)
+	{
+	case HDLC_CRC_16_CCITT: val |= BIT9; break;
+	case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
+	}
+
+	if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
+		val |= BIT6;
+
+	switch (info->params.preamble_length)
+	{
+	case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
+	case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
+	case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
+	}
+
+	if (info->params.flags & HDLC_FLAG_AUTO_CTS)
+		val |= BIT0;
+
+	wr_reg16(info, TCR, val);
+
+	/* TPR (transmit preamble) */
+
+	switch (info->params.preamble)
+	{
+	case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
+	case HDLC_PREAMBLE_PATTERN_ONES:  val = 0xff; break;
+	case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
+	case HDLC_PREAMBLE_PATTERN_10:    val = 0x55; break;
+	case HDLC_PREAMBLE_PATTERN_01:    val = 0xaa; break;
+	default:                          val = 0x7e; break;
+	}
+	wr_reg8(info, TPR, (unsigned char)val);
+
+	/* RCR (rx control)
+	 *
+	 * 15..13  mode
+	 *         000=HDLC/SDLC
+	 *         001=raw bit synchronous
+	 *         010=asynchronous/isochronous
+	 *         011=monosync byte synchronous
+	 *         100=bisync byte synchronous
+	 *         101=xsync byte synchronous
+	 * 12..10  encoding
+	 * 09      CRC enable
+	 * 08      CRC32
+	 * 07..03  reserved, must be 0
+	 * 02      reset
+	 * 01      enable
+	 * 00      auto-DCD enable
+	 */
+	val = 0;
+
+	switch(info->params.mode) {
+	case MGSL_MODE_XSYNC:
+		val |= BIT15 + BIT13;
+		break;
+	case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
+	case MGSL_MODE_BISYNC:   val |= BIT15; break;
+	case MGSL_MODE_RAW:      val |= BIT13; break;
+	}
+
+	switch(info->params.encoding)
+	{
+	case HDLC_ENCODING_NRZB:          val |= BIT10; break;
+	case HDLC_ENCODING_NRZI_MARK:     val |= BIT11; break;
+	case HDLC_ENCODING_NRZI:          val |= BIT11 + BIT10; break;
+	case HDLC_ENCODING_BIPHASE_MARK:  val |= BIT12; break;
+	case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
+	case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
+	case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
+	}
+
+	switch (info->params.crc_type & HDLC_CRC_MASK)
+	{
+	case HDLC_CRC_16_CCITT: val |= BIT9; break;
+	case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
+	}
+
+	if (info->params.flags & HDLC_FLAG_AUTO_DCD)
+		val |= BIT0;
+
+	wr_reg16(info, RCR, val);
+
+	/* CCR (clock control)
+	 *
+	 * 07..05  tx clock source
+	 * 04..02  rx clock source
+	 * 01      auxclk enable
+	 * 00      BRG enable
+	 */
+	val = 0;
+
+	if (info->params.flags & HDLC_FLAG_TXC_BRG)
+	{
+		// when RxC source is DPLL, BRG generates 16X DPLL
+		// reference clock, so take TxC from BRG/16 to get
+		// transmit clock at actual data rate
+		if (info->params.flags & HDLC_FLAG_RXC_DPLL)
+			val |= BIT6 + BIT5;	/* 011, txclk = BRG/16 */
+		else
+			val |= BIT6;	/* 010, txclk = BRG */
+	}
+	else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
+		val |= BIT7;	/* 100, txclk = DPLL Input */
+	else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
+		val |= BIT5;	/* 001, txclk = RXC Input */
+
+	if (info->params.flags & HDLC_FLAG_RXC_BRG)
+		val |= BIT3;	/* 010, rxclk = BRG */
+	else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
+		val |= BIT4;	/* 100, rxclk = DPLL */
+	else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
+		val |= BIT2;	/* 001, rxclk = TXC Input */
+
+	if (info->params.clock_speed)
+		val |= BIT1 + BIT0;
+
+	wr_reg8(info, CCR, (unsigned char)val);
+
+	if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
+	{
+		// program DPLL mode
+		switch(info->params.encoding)
+		{
+		case HDLC_ENCODING_BIPHASE_MARK:
+		case HDLC_ENCODING_BIPHASE_SPACE:
+			val = BIT7; break;
+		case HDLC_ENCODING_BIPHASE_LEVEL:
+		case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
+			val = BIT7 + BIT6; break;
+		default: val = BIT6;	// NRZ encodings
+		}
+		wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
+
+		// DPLL requires a 16X reference clock from BRG
+		set_rate(info, info->params.clock_speed * 16);
+	}
+	else
+		set_rate(info, info->params.clock_speed);
+
+	tx_set_idle(info);
+
+	msc_set_vcr(info);
+
+	/* SCR (serial control)
+	 *
+	 * 15  1=tx req on FIFO half empty
+	 * 14  1=rx req on FIFO half full
+	 * 13  tx data  IRQ enable
+	 * 12  tx idle  IRQ enable
+	 * 11  underrun IRQ enable
+	 * 10  rx data  IRQ enable
+	 * 09  rx idle  IRQ enable
+	 * 08  overrun  IRQ enable
+	 * 07  DSR      IRQ enable
+	 * 06  CTS      IRQ enable
+	 * 05  DCD      IRQ enable
+	 * 04  RI       IRQ enable
+	 * 03  reserved, must be zero
+	 * 02  1=txd->rxd internal loopback enable
+	 * 01  reserved, must be zero
+	 * 00  1=master IRQ enable
+	 */
+	wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
+
+	if (info->params.loopback)
+		enable_loopback(info);
+}
+
+/*
+ *  set transmit idle mode
+ */
+static void tx_set_idle(struct slgt_info *info)
+{
+	unsigned char val;
+	unsigned short tcr;
+
+	/* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
+	 * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
+	 */
+	tcr = rd_reg16(info, TCR);
+	if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
+		/* disable preamble, set idle size to 16 bits */
+		tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
+		/* MSB of 16 bit idle specified in tx preamble register (TPR) */
+		wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
+	} else if (!(tcr & BIT6)) {
+		/* preamble is disabled, set idle size to 8 bits */
+		tcr &= ~(BIT5 + BIT4);
+	}
+	wr_reg16(info, TCR, tcr);
+
+	if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
+		/* LSB of custom tx idle specified in tx idle register */
+		val = (unsigned char)(info->idle_mode & 0xff);
+	} else {
+		/* standard 8 bit idle patterns */
+		switch(info->idle_mode)
+		{
+		case HDLC_TXIDLE_FLAGS:          val = 0x7e; break;
+		case HDLC_TXIDLE_ALT_ZEROS_ONES:
+		case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
+		case HDLC_TXIDLE_ZEROS:
+		case HDLC_TXIDLE_SPACE:          val = 0x00; break;
+		default:                         val = 0xff;
+		}
+	}
+
+	wr_reg8(info, TIR, val);
+}
+
+/*
+ * get state of V24 status (input) signals
+ */
+static void get_signals(struct slgt_info *info)
+{
+	unsigned short status = rd_reg16(info, SSR);
+
+	/* clear all serial signals except DTR and RTS */
+	info->signals &= SerialSignal_DTR + SerialSignal_RTS;
+
+	if (status & BIT3)
+		info->signals |= SerialSignal_DSR;
+	if (status & BIT2)
+		info->signals |= SerialSignal_CTS;
+	if (status & BIT1)
+		info->signals |= SerialSignal_DCD;
+	if (status & BIT0)
+		info->signals |= SerialSignal_RI;
+}
+
+/*
+ * set V.24 Control Register based on current configuration
+ */
+static void msc_set_vcr(struct slgt_info *info)
+{
+	unsigned char val = 0;
+
+	/* VCR (V.24 control)
+	 *
+	 * 07..04  serial IF select
+	 * 03      DTR
+	 * 02      RTS
+	 * 01      LL
+	 * 00      RL
+	 */
+
+	switch(info->if_mode & MGSL_INTERFACE_MASK)
+	{
+	case MGSL_INTERFACE_RS232:
+		val |= BIT5; /* 0010 */
+		break;
+	case MGSL_INTERFACE_V35:
+		val |= BIT7 + BIT6 + BIT5; /* 1110 */
+		break;
+	case MGSL_INTERFACE_RS422:
+		val |= BIT6; /* 0100 */
+		break;
+	}
+
+	if (info->if_mode & MGSL_INTERFACE_MSB_FIRST)
+		val |= BIT4;
+	if (info->signals & SerialSignal_DTR)
+		val |= BIT3;
+	if (info->signals & SerialSignal_RTS)
+		val |= BIT2;
+	if (info->if_mode & MGSL_INTERFACE_LL)
+		val |= BIT1;
+	if (info->if_mode & MGSL_INTERFACE_RL)
+		val |= BIT0;
+	wr_reg8(info, VCR, val);
+}
+
+/*
+ * set state of V24 control (output) signals
+ */
+static void set_signals(struct slgt_info *info)
+{
+	unsigned char val = rd_reg8(info, VCR);
+	if (info->signals & SerialSignal_DTR)
+		val |= BIT3;
+	else
+		val &= ~BIT3;
+	if (info->signals & SerialSignal_RTS)
+		val |= BIT2;
+	else
+		val &= ~BIT2;
+	wr_reg8(info, VCR, val);
+}
+
+/*
+ * free range of receive DMA buffers (i to last)
+ */
+static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
+{
+	int done = 0;
+
+	while(!done) {
+		/* reset current buffer for reuse */
+		info->rbufs[i].status = 0;
+		set_desc_count(info->rbufs[i], info->rbuf_fill_level);
+		if (i == last)
+			done = 1;
+		if (++i == info->rbuf_count)
+			i = 0;
+	}
+	info->rbuf_current = i;
+}
+
+/*
+ * mark all receive DMA buffers as free
+ */
+static void reset_rbufs(struct slgt_info *info)
+{
+	free_rbufs(info, 0, info->rbuf_count - 1);
+	info->rbuf_fill_index = 0;
+	info->rbuf_fill_count = 0;
+}
+
+/*
+ * pass receive HDLC frame to upper layer
+ *
+ * return true if frame available, otherwise false
+ */
+static bool rx_get_frame(struct slgt_info *info)
+{
+	unsigned int start, end;
+	unsigned short status;
+	unsigned int framesize = 0;
+	unsigned long flags;
+	struct tty_struct *tty = info->port.tty;
+	unsigned char addr_field = 0xff;
+	unsigned int crc_size = 0;
+
+	switch (info->params.crc_type & HDLC_CRC_MASK) {
+	case HDLC_CRC_16_CCITT: crc_size = 2; break;
+	case HDLC_CRC_32_CCITT: crc_size = 4; break;
+	}
+
+check_again:
+
+	framesize = 0;
+	addr_field = 0xff;
+	start = end = info->rbuf_current;
+
+	for (;;) {
+		if (!desc_complete(info->rbufs[end]))
+			goto cleanup;
+
+		if (framesize == 0 && info->params.addr_filter != 0xff)
+			addr_field = info->rbufs[end].buf[0];
+
+		framesize += desc_count(info->rbufs[end]);
+
+		if (desc_eof(info->rbufs[end]))
+			break;
+
+		if (++end == info->rbuf_count)
+			end = 0;
+
+		if (end == info->rbuf_current) {
+			if (info->rx_enabled){
+				spin_lock_irqsave(&info->lock,flags);
+				rx_start(info);
+				spin_unlock_irqrestore(&info->lock,flags);
+			}
+			goto cleanup;
+		}
+	}
+
+	/* status
+	 *
+	 * 15      buffer complete
+	 * 14..06  reserved
+	 * 05..04  residue
+	 * 02      eof (end of frame)
+	 * 01      CRC error
+	 * 00      abort
+	 */
+	status = desc_status(info->rbufs[end]);
+
+	/* ignore CRC bit if not using CRC (bit is undefined) */
+	if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
+		status &= ~BIT1;
+
+	if (framesize == 0 ||
+		 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
+		free_rbufs(info, start, end);
+		goto check_again;
+	}
+
+	if (framesize < (2 + crc_size) || status & BIT0) {
+		info->icount.rxshort++;
+		framesize = 0;
+	} else if (status & BIT1) {
+		info->icount.rxcrc++;
+		if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
+			framesize = 0;
+	}
+
+#if SYNCLINK_GENERIC_HDLC
+	if (framesize == 0) {
+		info->netdev->stats.rx_errors++;
+		info->netdev->stats.rx_frame_errors++;
+	}
+#endif
+
+	DBGBH(("%s rx frame status=%04X size=%d\n",
+		info->device_name, status, framesize));
+	DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx");
+
+	if (framesize) {
+		if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
+			framesize -= crc_size;
+			crc_size = 0;
+		}
+
+		if (framesize > info->max_frame_size + crc_size)
+			info->icount.rxlong++;
+		else {
+			/* copy dma buffer(s) to contiguous temp buffer */
+			int copy_count = framesize;
+			int i = start;
+			unsigned char *p = info->tmp_rbuf;
+			info->tmp_rbuf_count = framesize;
+
+			info->icount.rxok++;
+
+			while(copy_count) {
+				int partial_count = min_t(int, copy_count, info->rbuf_fill_level);
+				memcpy(p, info->rbufs[i].buf, partial_count);
+				p += partial_count;
+				copy_count -= partial_count;
+				if (++i == info->rbuf_count)
+					i = 0;
+			}
+
+			if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
+				*p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
+				framesize++;
+			}
+
+#if SYNCLINK_GENERIC_HDLC
+			if (info->netcount)
+				hdlcdev_rx(info,info->tmp_rbuf, framesize);
+			else
+#endif
+				ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
+		}
+	}
+	free_rbufs(info, start, end);
+	return true;
+
+cleanup:
+	return false;
+}
+
+/*
+ * pass receive buffer (RAW synchronous mode) to tty layer
+ * return true if buffer available, otherwise false
+ */
+static bool rx_get_buf(struct slgt_info *info)
+{
+	unsigned int i = info->rbuf_current;
+	unsigned int count;
+
+	if (!desc_complete(info->rbufs[i]))
+		return false;
+	count = desc_count(info->rbufs[i]);
+	switch(info->params.mode) {
+	case MGSL_MODE_MONOSYNC:
+	case MGSL_MODE_BISYNC:
+	case MGSL_MODE_XSYNC:
+		/* ignore residue in byte synchronous modes */
+		if (desc_residue(info->rbufs[i]))
+			count--;
+		break;
+	}
+	DBGDATA(info, info->rbufs[i].buf, count, "rx");
+	DBGINFO(("rx_get_buf size=%d\n", count));
+	if (count)
+		ldisc_receive_buf(info->port.tty, info->rbufs[i].buf,
+				  info->flag_buf, count);
+	free_rbufs(info, i, i);
+	return true;
+}
+
+static void reset_tbufs(struct slgt_info *info)
+{
+	unsigned int i;
+	info->tbuf_current = 0;
+	for (i=0 ; i < info->tbuf_count ; i++) {
+		info->tbufs[i].status = 0;
+		info->tbufs[i].count  = 0;
+	}
+}
+
+/*
+ * return number of free transmit DMA buffers
+ */
+static unsigned int free_tbuf_count(struct slgt_info *info)
+{
+	unsigned int count = 0;
+	unsigned int i = info->tbuf_current;
+
+	do
+	{
+		if (desc_count(info->tbufs[i]))
+			break; /* buffer in use */
+		++count;
+		if (++i == info->tbuf_count)
+			i=0;
+	} while (i != info->tbuf_current);
+
+	/* if tx DMA active, last zero count buffer is in use */
+	if (count && (rd_reg32(info, TDCSR) & BIT0))
+		--count;
+
+	return count;
+}
+
+/*
+ * return number of bytes in unsent transmit DMA buffers
+ * and the serial controller tx FIFO
+ */
+static unsigned int tbuf_bytes(struct slgt_info *info)
+{
+	unsigned int total_count = 0;
+	unsigned int i = info->tbuf_current;
+	unsigned int reg_value;
+	unsigned int count;
+	unsigned int active_buf_count = 0;
+
+	/*
+	 * Add descriptor counts for all tx DMA buffers.
+	 * If count is zero (cleared by DMA controller after read),
+	 * the buffer is complete or is actively being read from.
+	 *
+	 * Record buf_count of last buffer with zero count starting
+	 * from current ring position. buf_count is mirror
+	 * copy of count and is not cleared by serial controller.
+	 * If DMA controller is active, that buffer is actively
+	 * being read so add to total.
+	 */
+	do {
+		count = desc_count(info->tbufs[i]);
+		if (count)
+			total_count += count;
+		else if (!total_count)
+			active_buf_count = info->tbufs[i].buf_count;
+		if (++i == info->tbuf_count)
+			i = 0;
+	} while (i != info->tbuf_current);
+
+	/* read tx DMA status register */
+	reg_value = rd_reg32(info, TDCSR);
+
+	/* if tx DMA active, last zero count buffer is in use */
+	if (reg_value & BIT0)
+		total_count += active_buf_count;
+
+	/* add tx FIFO count = reg_value[15..8] */
+	total_count += (reg_value >> 8) & 0xff;
+
+	/* if transmitter active add one byte for shift register */
+	if (info->tx_active)
+		total_count++;
+
+	return total_count;
+}
+
+/*
+ * load data into transmit DMA buffer ring and start transmitter if needed
+ * return true if data accepted, otherwise false (buffers full)
+ */
+static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size)
+{
+	unsigned short count;
+	unsigned int i;
+	struct slgt_desc *d;
+
+	/* check required buffer space */
+	if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info))
+		return false;
+
+	DBGDATA(info, buf, size, "tx");
+
+	/*
+	 * copy data to one or more DMA buffers in circular ring
+	 * tbuf_start   = first buffer for this data
+	 * tbuf_current = next free buffer
+	 *
+	 * Copy all data before making data visible to DMA controller by
+	 * setting descriptor count of the first buffer.
+	 * This prevents an active DMA controller from reading the first DMA
+	 * buffers of a frame and stopping before the final buffers are filled.
+	 */
+
+	info->tbuf_start = i = info->tbuf_current;
+
+	while (size) {
+		d = &info->tbufs[i];
+
+		count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
+		memcpy(d->buf, buf, count);
+
+		size -= count;
+		buf  += count;
+
+		/*
+		 * set EOF bit for last buffer of HDLC frame or
+		 * for every buffer in raw mode
+		 */
+		if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
+		    info->params.mode == MGSL_MODE_RAW)
+			set_desc_eof(*d, 1);
+		else
+			set_desc_eof(*d, 0);
+
+		/* set descriptor count for all but first buffer */
+		if (i != info->tbuf_start)
+			set_desc_count(*d, count);
+		d->buf_count = count;
+
+		if (++i == info->tbuf_count)
+			i = 0;
+	}
+
+	info->tbuf_current = i;
+
+	/* set first buffer count to make new data visible to DMA controller */
+	d = &info->tbufs[info->tbuf_start];
+	set_desc_count(*d, d->buf_count);
+
+	/* start transmitter if needed and update transmit timeout */
+	if (!info->tx_active)
+		tx_start(info);
+	update_tx_timer(info);
+
+	return true;
+}
+
+static int register_test(struct slgt_info *info)
+{
+	static unsigned short patterns[] =
+		{0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
+	static unsigned int count = ARRAY_SIZE(patterns);
+	unsigned int i;
+	int rc = 0;
+
+	for (i=0 ; i < count ; i++) {
+		wr_reg16(info, TIR, patterns[i]);
+		wr_reg16(info, BDR, patterns[(i+1)%count]);
+		if ((rd_reg16(info, TIR) != patterns[i]) ||
+		    (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
+			rc = -ENODEV;
+			break;
+		}
+	}
+	info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
+	info->init_error = rc ? 0 : DiagStatus_AddressFailure;
+	return rc;
+}
+
+static int irq_test(struct slgt_info *info)
+{
+	unsigned long timeout;
+	unsigned long flags;
+	struct tty_struct *oldtty = info->port.tty;
+	u32 speed = info->params.data_rate;
+
+	info->params.data_rate = 921600;
+	info->port.tty = NULL;
+
+	spin_lock_irqsave(&info->lock, flags);
+	async_mode(info);
+	slgt_irq_on(info, IRQ_TXIDLE);
+
+	/* enable transmitter */
+	wr_reg16(info, TCR,
+		(unsigned short)(rd_reg16(info, TCR) | BIT1));
+
+	/* write one byte and wait for tx idle */
+	wr_reg16(info, TDR, 0);
+
+	/* assume failure */
+	info->init_error = DiagStatus_IrqFailure;
+	info->irq_occurred = false;
+
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	timeout=100;
+	while(timeout-- && !info->irq_occurred)
+		msleep_interruptible(10);
+
+	spin_lock_irqsave(&info->lock,flags);
+	reset_port(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	info->params.data_rate = speed;
+	info->port.tty = oldtty;
+
+	info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
+	return info->irq_occurred ? 0 : -ENODEV;
+}
+
+static int loopback_test_rx(struct slgt_info *info)
+{
+	unsigned char *src, *dest;
+	int count;
+
+	if (desc_complete(info->rbufs[0])) {
+		count = desc_count(info->rbufs[0]);
+		src   = info->rbufs[0].buf;
+		dest  = info->tmp_rbuf;
+
+		for( ; count ; count-=2, src+=2) {
+			/* src=data byte (src+1)=status byte */
+			if (!(*(src+1) & (BIT9 + BIT8))) {
+				*dest = *src;
+				dest++;
+				info->tmp_rbuf_count++;
+			}
+		}
+		DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
+		return 1;
+	}
+	return 0;
+}
+
+static int loopback_test(struct slgt_info *info)
+{
+#define TESTFRAMESIZE 20
+
+	unsigned long timeout;
+	u16 count = TESTFRAMESIZE;
+	unsigned char buf[TESTFRAMESIZE];
+	int rc = -ENODEV;
+	unsigned long flags;
+
+	struct tty_struct *oldtty = info->port.tty;
+	MGSL_PARAMS params;
+
+	memcpy(&params, &info->params, sizeof(params));
+
+	info->params.mode = MGSL_MODE_ASYNC;
+	info->params.data_rate = 921600;
+	info->params.loopback = 1;
+	info->port.tty = NULL;
+
+	/* build and send transmit frame */
+	for (count = 0; count < TESTFRAMESIZE; ++count)
+		buf[count] = (unsigned char)count;
+
+	info->tmp_rbuf_count = 0;
+	memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
+
+	/* program hardware for HDLC and enabled receiver */
+	spin_lock_irqsave(&info->lock,flags);
+	async_mode(info);
+	rx_start(info);
+	tx_load(info, buf, count);
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	/* wait for receive complete */
+	for (timeout = 100; timeout; --timeout) {
+		msleep_interruptible(10);
+		if (loopback_test_rx(info)) {
+			rc = 0;
+			break;
+		}
+	}
+
+	/* verify received frame length and contents */
+	if (!rc && (info->tmp_rbuf_count != count ||
+		  memcmp(buf, info->tmp_rbuf, count))) {
+		rc = -ENODEV;
+	}
+
+	spin_lock_irqsave(&info->lock,flags);
+	reset_adapter(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	memcpy(&info->params, &params, sizeof(info->params));
+	info->port.tty = oldtty;
+
+	info->init_error = rc ? DiagStatus_DmaFailure : 0;
+	return rc;
+}
+
+static int adapter_test(struct slgt_info *info)
+{
+	DBGINFO(("testing %s\n", info->device_name));
+	if (register_test(info) < 0) {
+		printk("register test failure %s addr=%08X\n",
+			info->device_name, info->phys_reg_addr);
+	} else if (irq_test(info) < 0) {
+		printk("IRQ test failure %s IRQ=%d\n",
+			info->device_name, info->irq_level);
+	} else if (loopback_test(info) < 0) {
+		printk("loopback test failure %s\n", info->device_name);
+	}
+	return info->init_error;
+}
+
+/*
+ * transmit timeout handler
+ */
+static void tx_timeout(unsigned long context)
+{
+	struct slgt_info *info = (struct slgt_info*)context;
+	unsigned long flags;
+
+	DBGINFO(("%s tx_timeout\n", info->device_name));
+	if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
+		info->icount.txtimeout++;
+	}
+	spin_lock_irqsave(&info->lock,flags);
+	tx_stop(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+#if SYNCLINK_GENERIC_HDLC
+	if (info->netcount)
+		hdlcdev_tx_done(info);
+	else
+#endif
+		bh_transmit(info);
+}
+
+/*
+ * receive buffer polling timer
+ */
+static void rx_timeout(unsigned long context)
+{
+	struct slgt_info *info = (struct slgt_info*)context;
+	unsigned long flags;
+
+	DBGINFO(("%s rx_timeout\n", info->device_name));
+	spin_lock_irqsave(&info->lock, flags);
+	info->pending_bh |= BH_RECEIVE;
+	spin_unlock_irqrestore(&info->lock, flags);
+	bh_handler(&info->task);
+}
+
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
new file mode 100644
index 000000000000..327343694473
--- /dev/null
+++ b/drivers/tty/synclinkmp.c
@@ -0,0 +1,5600 @@
+/*
+ * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
+ *
+ * Device driver for Microgate SyncLink Multiport
+ * high speed multiprotocol serial adapter.
+ *
+ * written by Paul Fulghum for Microgate Corporation
+ * paulkf@microgate.com
+ *
+ * Microgate and SyncLink are trademarks of Microgate Corporation
+ *
+ * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
+ * This code is released under the GNU General Public License (GPL)
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
+#if defined(__i386__)
+#  define BREAKPOINT() asm("   int $3");
+#else
+#  define BREAKPOINT() { }
+#endif
+
+#define MAX_DEVICES 12
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ioctl.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <linux/bitops.h>
+#include <asm/types.h>
+#include <linux/termios.h>
+#include <linux/workqueue.h>
+#include <linux/hdlc.h>
+#include <linux/synclink.h>
+
+#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
+#define SYNCLINK_GENERIC_HDLC 1
+#else
+#define SYNCLINK_GENERIC_HDLC 0
+#endif
+
+#define GET_USER(error,value,addr) error = get_user(value,addr)
+#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
+#define PUT_USER(error,value,addr) error = put_user(value,addr)
+#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
+
+#include <asm/uaccess.h>
+
+static MGSL_PARAMS default_params = {
+	MGSL_MODE_HDLC,			/* unsigned long mode */
+	0,				/* unsigned char loopback; */
+	HDLC_FLAG_UNDERRUN_ABORT15,	/* unsigned short flags; */
+	HDLC_ENCODING_NRZI_SPACE,	/* unsigned char encoding; */
+	0,				/* unsigned long clock_speed; */
+	0xff,				/* unsigned char addr_filter; */
+	HDLC_CRC_16_CCITT,		/* unsigned short crc_type; */
+	HDLC_PREAMBLE_LENGTH_8BITS,	/* unsigned char preamble_length; */
+	HDLC_PREAMBLE_PATTERN_NONE,	/* unsigned char preamble; */
+	9600,				/* unsigned long data_rate; */
+	8,				/* unsigned char data_bits; */
+	1,				/* unsigned char stop_bits; */
+	ASYNC_PARITY_NONE		/* unsigned char parity; */
+};
+
+/* size in bytes of DMA data buffers */
+#define SCABUFSIZE 	1024
+#define SCA_MEM_SIZE	0x40000
+#define SCA_BASE_SIZE   512
+#define SCA_REG_SIZE    16
+#define SCA_MAX_PORTS   4
+#define SCAMAXDESC 	128
+
+#define	BUFFERLISTSIZE	4096
+
+/* SCA-I style DMA buffer descriptor */
+typedef struct _SCADESC
+{
+	u16	next;		/* lower l6 bits of next descriptor addr */
+	u16	buf_ptr;	/* lower 16 bits of buffer addr */
+	u8	buf_base;	/* upper 8 bits of buffer addr */
+	u8	pad1;
+	u16	length;		/* length of buffer */
+	u8	status;		/* status of buffer */
+	u8	pad2;
+} SCADESC, *PSCADESC;
+
+typedef struct _SCADESC_EX
+{
+	/* device driver bookkeeping section */
+	char 	*virt_addr;    	/* virtual address of data buffer */
+	u16	phys_entry;	/* lower 16-bits of physical address of this descriptor */
+} SCADESC_EX, *PSCADESC_EX;
+
+/* The queue of BH actions to be performed */
+
+#define BH_RECEIVE  1
+#define BH_TRANSMIT 2
+#define BH_STATUS   4
+
+#define IO_PIN_SHUTDOWN_LIMIT 100
+
+struct	_input_signal_events {
+	int	ri_up;
+	int	ri_down;
+	int	dsr_up;
+	int	dsr_down;
+	int	dcd_up;
+	int	dcd_down;
+	int	cts_up;
+	int	cts_down;
+};
+
+/*
+ * Device instance data structure
+ */
+typedef struct _synclinkmp_info {
+	void *if_ptr;				/* General purpose pointer (used by SPPP) */
+	int			magic;
+	struct tty_port		port;
+	int			line;
+	unsigned short		close_delay;
+	unsigned short		closing_wait;	/* time to wait before closing */
+
+	struct mgsl_icount	icount;
+
+	int			timeout;
+	int			x_char;		/* xon/xoff character */
+	u16			read_status_mask1;  /* break detection (SR1 indications) */
+	u16			read_status_mask2;  /* parity/framing/overun (SR2 indications) */
+	unsigned char 		ignore_status_mask1;  /* break detection (SR1 indications) */
+	unsigned char		ignore_status_mask2;  /* parity/framing/overun (SR2 indications) */
+	unsigned char 		*tx_buf;
+	int			tx_put;
+	int			tx_get;
+	int			tx_count;
+
+	wait_queue_head_t	status_event_wait_q;
+	wait_queue_head_t	event_wait_q;
+	struct timer_list	tx_timer;	/* HDLC transmit timeout timer */
+	struct _synclinkmp_info	*next_device;	/* device list link */
+	struct timer_list	status_timer;	/* input signal status check timer */
+
+	spinlock_t lock;		/* spinlock for synchronizing with ISR */
+	struct work_struct task;	 		/* task structure for scheduling bh */
+
+	u32 max_frame_size;			/* as set by device config */
+
+	u32 pending_bh;
+
+	bool bh_running;				/* Protection from multiple */
+	int isr_overflow;
+	bool bh_requested;
+
+	int dcd_chkcount;			/* check counts to prevent */
+	int cts_chkcount;			/* too many IRQs if a signal */
+	int dsr_chkcount;			/* is floating */
+	int ri_chkcount;
+
+	char *buffer_list;			/* virtual address of Rx & Tx buffer lists */
+	unsigned long buffer_list_phys;
+
+	unsigned int rx_buf_count;		/* count of total allocated Rx buffers */
+	SCADESC *rx_buf_list;   		/* list of receive buffer entries */
+	SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
+	unsigned int current_rx_buf;
+
+	unsigned int tx_buf_count;		/* count of total allocated Tx buffers */
+	SCADESC *tx_buf_list;		/* list of transmit buffer entries */
+	SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
+	unsigned int last_tx_buf;
+
+	unsigned char *tmp_rx_buf;
+	unsigned int tmp_rx_buf_count;
+
+	bool rx_enabled;
+	bool rx_overflow;
+
+	bool tx_enabled;
+	bool tx_active;
+	u32 idle_mode;
+
+	unsigned char ie0_value;
+	unsigned char ie1_value;
+	unsigned char ie2_value;
+	unsigned char ctrlreg_value;
+	unsigned char old_signals;
+
+	char device_name[25];			/* device instance name */
+
+	int port_count;
+	int adapter_num;
+	int port_num;
+
+	struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
+
+	unsigned int bus_type;			/* expansion bus type (ISA,EISA,PCI) */
+
+	unsigned int irq_level;			/* interrupt level */
+	unsigned long irq_flags;
+	bool irq_requested;			/* true if IRQ requested */
+
+	MGSL_PARAMS params;			/* communications parameters */
+
+	unsigned char serial_signals;		/* current serial signal states */
+
+	bool irq_occurred;			/* for diagnostics use */
+	unsigned int init_error;		/* Initialization startup error */
+
+	u32 last_mem_alloc;
+	unsigned char* memory_base;		/* shared memory address (PCI only) */
+	u32 phys_memory_base;
+    	int shared_mem_requested;
+
+	unsigned char* sca_base;		/* HD64570 SCA Memory address */
+	u32 phys_sca_base;
+	u32 sca_offset;
+	bool sca_base_requested;
+
+	unsigned char* lcr_base;		/* local config registers (PCI only) */
+	u32 phys_lcr_base;
+	u32 lcr_offset;
+	int lcr_mem_requested;
+
+	unsigned char* statctrl_base;		/* status/control register memory */
+	u32 phys_statctrl_base;
+	u32 statctrl_offset;
+	bool sca_statctrl_requested;
+
+	u32 misc_ctrl_value;
+	char flag_buf[MAX_ASYNC_BUFFER_SIZE];
+	char char_buf[MAX_ASYNC_BUFFER_SIZE];
+	bool drop_rts_on_tx_done;
+
+	struct	_input_signal_events	input_signal_events;
+
+	/* SPPP/Cisco HDLC device parts */
+	int netcount;
+	spinlock_t netlock;
+
+#if SYNCLINK_GENERIC_HDLC
+	struct net_device *netdev;
+#endif
+
+} SLMP_INFO;
+
+#define MGSL_MAGIC 0x5401
+
+/*
+ * define serial signal status change macros
+ */
+#define	MISCSTATUS_DCD_LATCHED	(SerialSignal_DCD<<8)	/* indicates change in DCD */
+#define MISCSTATUS_RI_LATCHED	(SerialSignal_RI<<8)	/* indicates change in RI */
+#define MISCSTATUS_CTS_LATCHED	(SerialSignal_CTS<<8)	/* indicates change in CTS */
+#define MISCSTATUS_DSR_LATCHED	(SerialSignal_DSR<<8)	/* change in DSR */
+
+/* Common Register macros */
+#define LPR	0x00
+#define PABR0	0x02
+#define PABR1	0x03
+#define WCRL	0x04
+#define WCRM	0x05
+#define WCRH	0x06
+#define DPCR	0x08
+#define DMER	0x09
+#define ISR0	0x10
+#define ISR1	0x11
+#define ISR2	0x12
+#define IER0	0x14
+#define IER1	0x15
+#define IER2	0x16
+#define ITCR	0x18
+#define INTVR 	0x1a
+#define IMVR	0x1c
+
+/* MSCI Register macros */
+#define TRB	0x20
+#define TRBL	0x20
+#define TRBH	0x21
+#define SR0	0x22
+#define SR1	0x23
+#define SR2	0x24
+#define SR3	0x25
+#define FST	0x26
+#define IE0	0x28
+#define IE1	0x29
+#define IE2	0x2a
+#define FIE	0x2b
+#define CMD	0x2c
+#define MD0	0x2e
+#define MD1	0x2f
+#define MD2	0x30
+#define CTL	0x31
+#define SA0	0x32
+#define SA1	0x33
+#define IDL	0x34
+#define TMC	0x35
+#define RXS	0x36
+#define TXS	0x37
+#define TRC0	0x38
+#define TRC1	0x39
+#define RRC	0x3a
+#define CST0	0x3c
+#define CST1	0x3d
+
+/* Timer Register Macros */
+#define TCNT	0x60
+#define TCNTL	0x60
+#define TCNTH	0x61
+#define TCONR	0x62
+#define TCONRL	0x62
+#define TCONRH	0x63
+#define TMCS	0x64
+#define TEPR	0x65
+
+/* DMA Controller Register macros */
+#define DARL	0x80
+#define DARH	0x81
+#define DARB	0x82
+#define BAR	0x80
+#define BARL	0x80
+#define BARH	0x81
+#define BARB	0x82
+#define SAR	0x84
+#define SARL	0x84
+#define SARH	0x85
+#define SARB	0x86
+#define CPB	0x86
+#define CDA	0x88
+#define CDAL	0x88
+#define CDAH	0x89
+#define EDA	0x8a
+#define EDAL	0x8a
+#define EDAH	0x8b
+#define BFL	0x8c
+#define BFLL	0x8c
+#define BFLH	0x8d
+#define BCR	0x8e
+#define BCRL	0x8e
+#define BCRH	0x8f
+#define DSR	0x90
+#define DMR	0x91
+#define FCT	0x93
+#define DIR	0x94
+#define DCMD	0x95
+
+/* combine with timer or DMA register address */
+#define TIMER0	0x00
+#define TIMER1	0x08
+#define TIMER2	0x10
+#define TIMER3	0x18
+#define RXDMA 	0x00
+#define TXDMA 	0x20
+
+/* SCA Command Codes */
+#define NOOP		0x00
+#define TXRESET		0x01
+#define TXENABLE	0x02
+#define TXDISABLE	0x03
+#define TXCRCINIT	0x04
+#define TXCRCEXCL	0x05
+#define TXEOM		0x06
+#define TXABORT		0x07
+#define MPON		0x08
+#define TXBUFCLR	0x09
+#define RXRESET		0x11
+#define RXENABLE	0x12
+#define RXDISABLE	0x13
+#define RXCRCINIT	0x14
+#define RXREJECT	0x15
+#define SEARCHMP	0x16
+#define RXCRCEXCL	0x17
+#define RXCRCCALC	0x18
+#define CHRESET		0x21
+#define HUNT		0x31
+
+/* DMA command codes */
+#define SWABORT		0x01
+#define FEICLEAR	0x02
+
+/* IE0 */
+#define TXINTE 		BIT7
+#define RXINTE 		BIT6
+#define TXRDYE 		BIT1
+#define RXRDYE 		BIT0
+
+/* IE1 & SR1 */
+#define UDRN   	BIT7
+#define IDLE   	BIT6
+#define SYNCD  	BIT4
+#define FLGD   	BIT4
+#define CCTS   	BIT3
+#define CDCD   	BIT2
+#define BRKD   	BIT1
+#define ABTD   	BIT1
+#define GAPD   	BIT1
+#define BRKE   	BIT0
+#define IDLD	BIT0
+
+/* IE2 & SR2 */
+#define EOM	BIT7
+#define PMP	BIT6
+#define SHRT	BIT6
+#define PE	BIT5
+#define ABT	BIT5
+#define FRME	BIT4
+#define RBIT	BIT4
+#define OVRN	BIT3
+#define CRCE	BIT2
+
+
+/*
+ * Global linked list of SyncLink devices
+ */
+static SLMP_INFO *synclinkmp_device_list = NULL;
+static int synclinkmp_adapter_count = -1;
+static int synclinkmp_device_count = 0;
+
+/*
+ * Set this param to non-zero to load eax with the
+ * .text section address and breakpoint on module load.
+ * This is useful for use with gdb and add-symbol-file command.
+ */
+static int break_on_load = 0;
+
+/*
+ * Driver major number, defaults to zero to get auto
+ * assigned major number. May be forced as module parameter.
+ */
+static int ttymajor = 0;
+
+/*
+ * Array of user specified options for ISA adapters.
+ */
+static int debug_level = 0;
+static int maxframe[MAX_DEVICES] = {0,};
+
+module_param(break_on_load, bool, 0);
+module_param(ttymajor, int, 0);
+module_param(debug_level, int, 0);
+module_param_array(maxframe, int, NULL, 0);
+
+static char *driver_name = "SyncLink MultiPort driver";
+static char *driver_version = "$Revision: 4.38 $";
+
+static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
+static void synclinkmp_remove_one(struct pci_dev *dev);
+
+static struct pci_device_id synclinkmp_pci_tbl[] = {
+	{ PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, }, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
+
+MODULE_LICENSE("GPL");
+
+static struct pci_driver synclinkmp_pci_driver = {
+	.name		= "synclinkmp",
+	.id_table	= synclinkmp_pci_tbl,
+	.probe		= synclinkmp_init_one,
+	.remove		= __devexit_p(synclinkmp_remove_one),
+};
+
+
+static struct tty_driver *serial_driver;
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+
+/* tty callbacks */
+
+static int  open(struct tty_struct *tty, struct file * filp);
+static void close(struct tty_struct *tty, struct file * filp);
+static void hangup(struct tty_struct *tty);
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
+
+static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
+static int put_char(struct tty_struct *tty, unsigned char ch);
+static void send_xchar(struct tty_struct *tty, char ch);
+static void wait_until_sent(struct tty_struct *tty, int timeout);
+static int  write_room(struct tty_struct *tty);
+static void flush_chars(struct tty_struct *tty);
+static void flush_buffer(struct tty_struct *tty);
+static void tx_hold(struct tty_struct *tty);
+static void tx_release(struct tty_struct *tty);
+
+static int  ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
+static int  chars_in_buffer(struct tty_struct *tty);
+static void throttle(struct tty_struct * tty);
+static void unthrottle(struct tty_struct * tty);
+static int set_break(struct tty_struct *tty, int break_state);
+
+#if SYNCLINK_GENERIC_HDLC
+#define dev_to_port(D) (dev_to_hdlc(D)->priv)
+static void hdlcdev_tx_done(SLMP_INFO *info);
+static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
+static int  hdlcdev_init(SLMP_INFO *info);
+static void hdlcdev_exit(SLMP_INFO *info);
+#endif
+
+/* ioctl handlers */
+
+static int  get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
+static int  get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
+static int  set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
+static int  get_txidle(SLMP_INFO *info, int __user *idle_mode);
+static int  set_txidle(SLMP_INFO *info, int idle_mode);
+static int  tx_enable(SLMP_INFO *info, int enable);
+static int  tx_abort(SLMP_INFO *info);
+static int  rx_enable(SLMP_INFO *info, int enable);
+static int  modem_input_wait(SLMP_INFO *info,int arg);
+static int  wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
+static int  tiocmget(struct tty_struct *tty);
+static int  tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear);
+static int  set_break(struct tty_struct *tty, int break_state);
+
+static void add_device(SLMP_INFO *info);
+static void device_init(int adapter_num, struct pci_dev *pdev);
+static int  claim_resources(SLMP_INFO *info);
+static void release_resources(SLMP_INFO *info);
+
+static int  startup(SLMP_INFO *info);
+static int  block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
+static int carrier_raised(struct tty_port *port);
+static void shutdown(SLMP_INFO *info);
+static void program_hw(SLMP_INFO *info);
+static void change_params(SLMP_INFO *info);
+
+static bool init_adapter(SLMP_INFO *info);
+static bool register_test(SLMP_INFO *info);
+static bool irq_test(SLMP_INFO *info);
+static bool loopback_test(SLMP_INFO *info);
+static int  adapter_test(SLMP_INFO *info);
+static bool memory_test(SLMP_INFO *info);
+
+static void reset_adapter(SLMP_INFO *info);
+static void reset_port(SLMP_INFO *info);
+static void async_mode(SLMP_INFO *info);
+static void hdlc_mode(SLMP_INFO *info);
+
+static void rx_stop(SLMP_INFO *info);
+static void rx_start(SLMP_INFO *info);
+static void rx_reset_buffers(SLMP_INFO *info);
+static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
+static bool rx_get_frame(SLMP_INFO *info);
+
+static void tx_start(SLMP_INFO *info);
+static void tx_stop(SLMP_INFO *info);
+static void tx_load_fifo(SLMP_INFO *info);
+static void tx_set_idle(SLMP_INFO *info);
+static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
+
+static void get_signals(SLMP_INFO *info);
+static void set_signals(SLMP_INFO *info);
+static void enable_loopback(SLMP_INFO *info, int enable);
+static void set_rate(SLMP_INFO *info, u32 data_rate);
+
+static int  bh_action(SLMP_INFO *info);
+static void bh_handler(struct work_struct *work);
+static void bh_receive(SLMP_INFO *info);
+static void bh_transmit(SLMP_INFO *info);
+static void bh_status(SLMP_INFO *info);
+static void isr_timer(SLMP_INFO *info);
+static void isr_rxint(SLMP_INFO *info);
+static void isr_rxrdy(SLMP_INFO *info);
+static void isr_txint(SLMP_INFO *info);
+static void isr_txrdy(SLMP_INFO *info);
+static void isr_rxdmaok(SLMP_INFO *info);
+static void isr_rxdmaerror(SLMP_INFO *info);
+static void isr_txdmaok(SLMP_INFO *info);
+static void isr_txdmaerror(SLMP_INFO *info);
+static void isr_io_pin(SLMP_INFO *info, u16 status);
+
+static int  alloc_dma_bufs(SLMP_INFO *info);
+static void free_dma_bufs(SLMP_INFO *info);
+static int  alloc_buf_list(SLMP_INFO *info);
+static int  alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
+static int  alloc_tmp_rx_buf(SLMP_INFO *info);
+static void free_tmp_rx_buf(SLMP_INFO *info);
+
+static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
+static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
+static void tx_timeout(unsigned long context);
+static void status_timeout(unsigned long context);
+
+static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
+static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
+static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
+static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
+static unsigned char read_status_reg(SLMP_INFO * info);
+static void write_control_reg(SLMP_INFO * info);
+
+
+static unsigned char rx_active_fifo_level = 16;	// rx request FIFO activation level in bytes
+static unsigned char tx_active_fifo_level = 16;	// tx request FIFO activation level in bytes
+static unsigned char tx_negate_fifo_level = 32;	// tx request FIFO negation level in bytes
+
+static u32 misc_ctrl_value = 0x007e4040;
+static u32 lcr1_brdr_value = 0x00800028;
+
+static u32 read_ahead_count = 8;
+
+/* DPCR, DMA Priority Control
+ *
+ * 07..05  Not used, must be 0
+ * 04      BRC, bus release condition: 0=all transfers complete
+ *              1=release after 1 xfer on all channels
+ * 03      CCC, channel change condition: 0=every cycle
+ *              1=after each channel completes all xfers
+ * 02..00  PR<2..0>, priority 100=round robin
+ *
+ * 00000100 = 0x00
+ */
+static unsigned char dma_priority = 0x04;
+
+// Number of bytes that can be written to shared RAM
+// in a single write operation
+static u32 sca_pci_load_interval = 64;
+
+/*
+ * 1st function defined in .text section. Calling this function in
+ * init_module() followed by a breakpoint allows a remote debugger
+ * (gdb) to get the .text address for the add-symbol-file command.
+ * This allows remote debugging of dynamically loadable modules.
+ */
+static void* synclinkmp_get_text_ptr(void);
+static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
+
+static inline int sanity_check(SLMP_INFO *info,
+			       char *name, const char *routine)
+{
+#ifdef SANITY_CHECK
+	static const char *badmagic =
+		"Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
+	static const char *badinfo =
+		"Warning: null synclinkmp_struct for (%s) in %s\n";
+
+	if (!info) {
+		printk(badinfo, name, routine);
+		return 1;
+	}
+	if (info->magic != MGSL_MAGIC) {
+		printk(badmagic, name, routine);
+		return 1;
+	}
+#else
+	if (!info)
+		return 1;
+#endif
+	return 0;
+}
+
+/**
+ * line discipline callback wrappers
+ *
+ * The wrappers maintain line discipline references
+ * while calling into the line discipline.
+ *
+ * ldisc_receive_buf  - pass receive data to line discipline
+ */
+
+static void ldisc_receive_buf(struct tty_struct *tty,
+			      const __u8 *data, char *flags, int count)
+{
+	struct tty_ldisc *ld;
+	if (!tty)
+		return;
+	ld = tty_ldisc_ref(tty);
+	if (ld) {
+		if (ld->ops->receive_buf)
+			ld->ops->receive_buf(tty, data, flags, count);
+		tty_ldisc_deref(ld);
+	}
+}
+
+/* tty callbacks */
+
+/* Called when a port is opened.  Init and enable port.
+ */
+static int open(struct tty_struct *tty, struct file *filp)
+{
+	SLMP_INFO *info;
+	int retval, line;
+	unsigned long flags;
+
+	line = tty->index;
+	if ((line < 0) || (line >= synclinkmp_device_count)) {
+		printk("%s(%d): open with invalid line #%d.\n",
+			__FILE__,__LINE__,line);
+		return -ENODEV;
+	}
+
+	info = synclinkmp_device_list;
+	while(info && info->line != line)
+		info = info->next_device;
+	if (sanity_check(info, tty->name, "open"))
+		return -ENODEV;
+	if ( info->init_error ) {
+		printk("%s(%d):%s device is not allocated, init error=%d\n",
+			__FILE__,__LINE__,info->device_name,info->init_error);
+		return -ENODEV;
+	}
+
+	tty->driver_data = info;
+	info->port.tty = tty;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s open(), old ref count = %d\n",
+			 __FILE__,__LINE__,tty->driver->name, info->port.count);
+
+	/* If port is closing, signal caller to try again */
+	if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+		if (info->port.flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->port.close_wait);
+		retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
+			-EAGAIN : -ERESTARTSYS);
+		goto cleanup;
+	}
+
+	info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+	spin_lock_irqsave(&info->netlock, flags);
+	if (info->netcount) {
+		retval = -EBUSY;
+		spin_unlock_irqrestore(&info->netlock, flags);
+		goto cleanup;
+	}
+	info->port.count++;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	if (info->port.count == 1) {
+		/* 1st open on this device, init hardware */
+		retval = startup(info);
+		if (retval < 0)
+			goto cleanup;
+	}
+
+	retval = block_til_ready(tty, filp, info);
+	if (retval) {
+		if (debug_level >= DEBUG_LEVEL_INFO)
+			printk("%s(%d):%s block_til_ready() returned %d\n",
+				 __FILE__,__LINE__, info->device_name, retval);
+		goto cleanup;
+	}
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s open() success\n",
+			 __FILE__,__LINE__, info->device_name);
+	retval = 0;
+
+cleanup:
+	if (retval) {
+		if (tty->count == 1)
+			info->port.tty = NULL; /* tty layer will release tty struct */
+		if(info->port.count)
+			info->port.count--;
+	}
+
+	return retval;
+}
+
+/* Called when port is closed. Wait for remaining data to be
+ * sent. Disable port and free resources.
+ */
+static void close(struct tty_struct *tty, struct file *filp)
+{
+	SLMP_INFO * info = tty->driver_data;
+
+	if (sanity_check(info, tty->name, "close"))
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s close() entry, count=%d\n",
+			 __FILE__,__LINE__, info->device_name, info->port.count);
+
+	if (tty_port_close_start(&info->port, tty, filp) == 0)
+		goto cleanup;
+
+	mutex_lock(&info->port.mutex);
+ 	if (info->port.flags & ASYNC_INITIALIZED)
+ 		wait_until_sent(tty, info->timeout);
+
+	flush_buffer(tty);
+	tty_ldisc_flush(tty);
+	shutdown(info);
+	mutex_unlock(&info->port.mutex);
+
+	tty_port_close_end(&info->port, tty);
+	info->port.tty = NULL;
+cleanup:
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
+			tty->driver->name, info->port.count);
+}
+
+/* Called by tty_hangup() when a hangup is signaled.
+ * This is the same as closing all open descriptors for the port.
+ */
+static void hangup(struct tty_struct *tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s hangup()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "hangup"))
+		return;
+
+	mutex_lock(&info->port.mutex);
+	flush_buffer(tty);
+	shutdown(info);
+
+	spin_lock_irqsave(&info->port.lock, flags);
+	info->port.count = 0;
+	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->port.tty = NULL;
+	spin_unlock_irqrestore(&info->port.lock, flags);
+	mutex_unlock(&info->port.mutex);
+
+	wake_up_interruptible(&info->port.open_wait);
+}
+
+/* Set new termios settings
+ */
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
+			tty->driver->name );
+
+	change_params(info);
+
+	/* Handle transition to B0 status */
+	if (old_termios->c_cflag & CBAUD &&
+	    !(tty->termios->c_cflag & CBAUD)) {
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+		spin_lock_irqsave(&info->lock,flags);
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+
+	/* Handle transition away from B0 status */
+	if (!(old_termios->c_cflag & CBAUD) &&
+	    tty->termios->c_cflag & CBAUD) {
+		info->serial_signals |= SerialSignal_DTR;
+ 		if (!(tty->termios->c_cflag & CRTSCTS) ||
+ 		    !test_bit(TTY_THROTTLED, &tty->flags)) {
+			info->serial_signals |= SerialSignal_RTS;
+ 		}
+		spin_lock_irqsave(&info->lock,flags);
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+
+	/* Handle turning off CRTSCTS */
+	if (old_termios->c_cflag & CRTSCTS &&
+	    !(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		tx_release(tty);
+	}
+}
+
+/* Send a block of data
+ *
+ * Arguments:
+ *
+ * 	tty		pointer to tty information structure
+ * 	buf		pointer to buffer containing send data
+ * 	count		size of send data in bytes
+ *
+ * Return Value:	number of characters written
+ */
+static int write(struct tty_struct *tty,
+		 const unsigned char *buf, int count)
+{
+	int	c, ret = 0;
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s write() count=%d\n",
+		       __FILE__,__LINE__,info->device_name,count);
+
+	if (sanity_check(info, tty->name, "write"))
+		goto cleanup;
+
+	if (!info->tx_buf)
+		goto cleanup;
+
+	if (info->params.mode == MGSL_MODE_HDLC) {
+		if (count > info->max_frame_size) {
+			ret = -EIO;
+			goto cleanup;
+		}
+		if (info->tx_active)
+			goto cleanup;
+		if (info->tx_count) {
+			/* send accumulated data from send_char() calls */
+			/* as frame and wait before accepting more data. */
+			tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
+			goto start;
+		}
+		ret = info->tx_count = count;
+		tx_load_dma_buffer(info, buf, count);
+		goto start;
+	}
+
+	for (;;) {
+		c = min_t(int, count,
+			min(info->max_frame_size - info->tx_count - 1,
+			    info->max_frame_size - info->tx_put));
+		if (c <= 0)
+			break;
+			
+		memcpy(info->tx_buf + info->tx_put, buf, c);
+
+		spin_lock_irqsave(&info->lock,flags);
+		info->tx_put += c;
+		if (info->tx_put >= info->max_frame_size)
+			info->tx_put -= info->max_frame_size;
+		info->tx_count += c;
+		spin_unlock_irqrestore(&info->lock,flags);
+
+		buf += c;
+		count -= c;
+		ret += c;
+	}
+
+	if (info->params.mode == MGSL_MODE_HDLC) {
+		if (count) {
+			ret = info->tx_count = 0;
+			goto cleanup;
+		}
+		tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
+	}
+start:
+ 	if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
+		spin_lock_irqsave(&info->lock,flags);
+		if (!info->tx_active)
+		 	tx_start(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+ 	}
+
+cleanup:
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk( "%s(%d):%s write() returning=%d\n",
+			__FILE__,__LINE__,info->device_name,ret);
+	return ret;
+}
+
+/* Add a character to the transmit buffer.
+ */
+static int put_char(struct tty_struct *tty, unsigned char ch)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+	int ret = 0;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO ) {
+		printk( "%s(%d):%s put_char(%d)\n",
+			__FILE__,__LINE__,info->device_name,ch);
+	}
+
+	if (sanity_check(info, tty->name, "put_char"))
+		return 0;
+
+	if (!info->tx_buf)
+		return 0;
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	if ( (info->params.mode != MGSL_MODE_HDLC) ||
+	     !info->tx_active ) {
+
+		if (info->tx_count < info->max_frame_size - 1) {
+			info->tx_buf[info->tx_put++] = ch;
+			if (info->tx_put >= info->max_frame_size)
+				info->tx_put -= info->max_frame_size;
+			info->tx_count++;
+			ret = 1;
+		}
+	}
+
+	spin_unlock_irqrestore(&info->lock,flags);
+	return ret;
+}
+
+/* Send a high-priority XON/XOFF character
+ */
+static void send_xchar(struct tty_struct *tty, char ch)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s send_xchar(%d)\n",
+			 __FILE__,__LINE__, info->device_name, ch );
+
+	if (sanity_check(info, tty->name, "send_xchar"))
+		return;
+
+	info->x_char = ch;
+	if (ch) {
+		/* Make sure transmit interrupts are on */
+		spin_lock_irqsave(&info->lock,flags);
+		if (!info->tx_enabled)
+		 	tx_start(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+}
+
+/* Wait until the transmitter is empty.
+ */
+static void wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	SLMP_INFO * info = tty->driver_data;
+	unsigned long orig_jiffies, char_time;
+
+	if (!info )
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s wait_until_sent() entry\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "wait_until_sent"))
+		return;
+
+	if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags))
+		goto exit;
+
+	orig_jiffies = jiffies;
+
+	/* Set check interval to 1/5 of estimated time to
+	 * send a character, and make it at least 1. The check
+	 * interval should also be less than the timeout.
+	 * Note: use tight timings here to satisfy the NIST-PCTS.
+	 */
+
+	if ( info->params.data_rate ) {
+	       	char_time = info->timeout/(32 * 5);
+		if (!char_time)
+			char_time++;
+	} else
+		char_time = 1;
+
+	if (timeout)
+		char_time = min_t(unsigned long, char_time, timeout);
+
+	if ( info->params.mode == MGSL_MODE_HDLC ) {
+		while (info->tx_active) {
+			msleep_interruptible(jiffies_to_msecs(char_time));
+			if (signal_pending(current))
+				break;
+			if (timeout && time_after(jiffies, orig_jiffies + timeout))
+				break;
+		}
+	} else {
+		/*
+		 * TODO: determine if there is something similar to USC16C32
+		 * 	 TXSTATUS_ALL_SENT status
+		 */
+		while ( info->tx_active && info->tx_enabled) {
+			msleep_interruptible(jiffies_to_msecs(char_time));
+			if (signal_pending(current))
+				break;
+			if (timeout && time_after(jiffies, orig_jiffies + timeout))
+				break;
+		}
+	}
+
+exit:
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s wait_until_sent() exit\n",
+			 __FILE__,__LINE__, info->device_name );
+}
+
+/* Return the count of free bytes in transmit buffer
+ */
+static int write_room(struct tty_struct *tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+	int ret;
+
+	if (sanity_check(info, tty->name, "write_room"))
+		return 0;
+
+	if (info->params.mode == MGSL_MODE_HDLC) {
+		ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
+	} else {
+		ret = info->max_frame_size - info->tx_count - 1;
+		if (ret < 0)
+			ret = 0;
+	}
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s write_room()=%d\n",
+		       __FILE__, __LINE__, info->device_name, ret);
+
+	return ret;
+}
+
+/* enable transmitter and send remaining buffered characters
+ */
+static void flush_chars(struct tty_struct *tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
+			__FILE__,__LINE__,info->device_name,info->tx_count);
+
+	if (sanity_check(info, tty->name, "flush_chars"))
+		return;
+
+	if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
+	    !info->tx_buf)
+		return;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
+			__FILE__,__LINE__,info->device_name );
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	if (!info->tx_active) {
+		if ( (info->params.mode == MGSL_MODE_HDLC) &&
+			info->tx_count ) {
+			/* operating in synchronous (frame oriented) mode */
+			/* copy data from circular tx_buf to */
+			/* transmit DMA buffer. */
+			tx_load_dma_buffer(info,
+				 info->tx_buf,info->tx_count);
+		}
+	 	tx_start(info);
+	}
+
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Discard all data in the send buffer
+ */
+static void flush_buffer(struct tty_struct *tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s flush_buffer() entry\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "flush_buffer"))
+		return;
+
+	spin_lock_irqsave(&info->lock,flags);
+	info->tx_count = info->tx_put = info->tx_get = 0;
+	del_timer(&info->tx_timer);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	tty_wakeup(tty);
+}
+
+/* throttle (stop) transmitter
+ */
+static void tx_hold(struct tty_struct *tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "tx_hold"))
+		return;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("%s(%d):%s tx_hold()\n",
+			__FILE__,__LINE__,info->device_name);
+
+	spin_lock_irqsave(&info->lock,flags);
+	if (info->tx_enabled)
+	 	tx_stop(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* release (start) transmitter
+ */
+static void tx_release(struct tty_struct *tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "tx_release"))
+		return;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("%s(%d):%s tx_release()\n",
+			__FILE__,__LINE__,info->device_name);
+
+	spin_lock_irqsave(&info->lock,flags);
+	if (!info->tx_enabled)
+	 	tx_start(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Service an IOCTL request
+ *
+ * Arguments:
+ *
+ * 	tty	pointer to tty instance data
+ * 	cmd	IOCTL command code
+ * 	arg	command argument/context
+ *
+ * Return Value:	0 if success, otherwise error code
+ */
+static int ioctl(struct tty_struct *tty,
+		 unsigned int cmd, unsigned long arg)
+{
+	SLMP_INFO *info = tty->driver_data;
+	void __user *argp = (void __user *)arg;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
+			info->device_name, cmd );
+
+	if (sanity_check(info, tty->name, "ioctl"))
+		return -ENODEV;
+
+	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+	    (cmd != TIOCMIWAIT)) {
+		if (tty->flags & (1 << TTY_IO_ERROR))
+		    return -EIO;
+	}
+
+	switch (cmd) {
+	case MGSL_IOCGPARAMS:
+		return get_params(info, argp);
+	case MGSL_IOCSPARAMS:
+		return set_params(info, argp);
+	case MGSL_IOCGTXIDLE:
+		return get_txidle(info, argp);
+	case MGSL_IOCSTXIDLE:
+		return set_txidle(info, (int)arg);
+	case MGSL_IOCTXENABLE:
+		return tx_enable(info, (int)arg);
+	case MGSL_IOCRXENABLE:
+		return rx_enable(info, (int)arg);
+	case MGSL_IOCTXABORT:
+		return tx_abort(info);
+	case MGSL_IOCGSTATS:
+		return get_stats(info, argp);
+	case MGSL_IOCWAITEVENT:
+		return wait_mgsl_event(info, argp);
+	case MGSL_IOCLOOPTXDONE:
+		return 0; // TODO: Not supported, need to document
+		/* Wait for modem input (DCD,RI,DSR,CTS) change
+		 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
+		 */
+	case TIOCMIWAIT:
+		return modem_input_wait(info,(int)arg);
+		
+		/*
+		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+		 * Return: write counters to the user passed counter struct
+		 * NB: both 1->0 and 0->1 transitions are counted except for
+		 *     RI where only 0->1 is counted.
+		 */
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+static int get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	SLMP_INFO *info = tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
+/*
+ * /proc fs routines....
+ */
+
+static inline void line_info(struct seq_file *m, SLMP_INFO *info)
+{
+	char	stat_buf[30];
+	unsigned long flags;
+
+	seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
+		       "\tIRQ=%d MaxFrameSize=%u\n",
+		info->device_name,
+		info->phys_sca_base,
+		info->phys_memory_base,
+		info->phys_statctrl_base,
+		info->phys_lcr_base,
+		info->irq_level,
+		info->max_frame_size );
+
+	/* output current serial signal states */
+	spin_lock_irqsave(&info->lock,flags);
+ 	get_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	stat_buf[0] = 0;
+	stat_buf[1] = 0;
+	if (info->serial_signals & SerialSignal_RTS)
+		strcat(stat_buf, "|RTS");
+	if (info->serial_signals & SerialSignal_CTS)
+		strcat(stat_buf, "|CTS");
+	if (info->serial_signals & SerialSignal_DTR)
+		strcat(stat_buf, "|DTR");
+	if (info->serial_signals & SerialSignal_DSR)
+		strcat(stat_buf, "|DSR");
+	if (info->serial_signals & SerialSignal_DCD)
+		strcat(stat_buf, "|CD");
+	if (info->serial_signals & SerialSignal_RI)
+		strcat(stat_buf, "|RI");
+
+	if (info->params.mode == MGSL_MODE_HDLC) {
+		seq_printf(m, "\tHDLC txok:%d rxok:%d",
+			      info->icount.txok, info->icount.rxok);
+		if (info->icount.txunder)
+			seq_printf(m, " txunder:%d", info->icount.txunder);
+		if (info->icount.txabort)
+			seq_printf(m, " txabort:%d", info->icount.txabort);
+		if (info->icount.rxshort)
+			seq_printf(m, " rxshort:%d", info->icount.rxshort);
+		if (info->icount.rxlong)
+			seq_printf(m, " rxlong:%d", info->icount.rxlong);
+		if (info->icount.rxover)
+			seq_printf(m, " rxover:%d", info->icount.rxover);
+		if (info->icount.rxcrc)
+			seq_printf(m, " rxlong:%d", info->icount.rxcrc);
+	} else {
+		seq_printf(m, "\tASYNC tx:%d rx:%d",
+			      info->icount.tx, info->icount.rx);
+		if (info->icount.frame)
+			seq_printf(m, " fe:%d", info->icount.frame);
+		if (info->icount.parity)
+			seq_printf(m, " pe:%d", info->icount.parity);
+		if (info->icount.brk)
+			seq_printf(m, " brk:%d", info->icount.brk);
+		if (info->icount.overrun)
+			seq_printf(m, " oe:%d", info->icount.overrun);
+	}
+
+	/* Append serial signal status to end */
+	seq_printf(m, " %s\n", stat_buf+1);
+
+	seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
+	 info->tx_active,info->bh_requested,info->bh_running,
+	 info->pending_bh);
+}
+
+/* Called to print information about devices
+ */
+static int synclinkmp_proc_show(struct seq_file *m, void *v)
+{
+	SLMP_INFO *info;
+
+	seq_printf(m, "synclinkmp driver:%s\n", driver_version);
+
+	info = synclinkmp_device_list;
+	while( info ) {
+		line_info(m, info);
+		info = info->next_device;
+	}
+	return 0;
+}
+
+static int synclinkmp_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, synclinkmp_proc_show, NULL);
+}
+
+static const struct file_operations synclinkmp_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= synclinkmp_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/* Return the count of bytes in transmit buffer
+ */
+static int chars_in_buffer(struct tty_struct *tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+
+	if (sanity_check(info, tty->name, "chars_in_buffer"))
+		return 0;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s chars_in_buffer()=%d\n",
+		       __FILE__, __LINE__, info->device_name, info->tx_count);
+
+	return info->tx_count;
+}
+
+/* Signal remote device to throttle send data (our receive data)
+ */
+static void throttle(struct tty_struct * tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s throttle() entry\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "throttle"))
+		return;
+
+	if (I_IXOFF(tty))
+		send_xchar(tty, STOP_CHAR(tty));
+
+ 	if (tty->termios->c_cflag & CRTSCTS) {
+		spin_lock_irqsave(&info->lock,flags);
+		info->serial_signals &= ~SerialSignal_RTS;
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+}
+
+/* Signal remote device to stop throttling send data (our receive data)
+ */
+static void unthrottle(struct tty_struct * tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s unthrottle() entry\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "unthrottle"))
+		return;
+
+	if (I_IXOFF(tty)) {
+		if (info->x_char)
+			info->x_char = 0;
+		else
+			send_xchar(tty, START_CHAR(tty));
+	}
+
+ 	if (tty->termios->c_cflag & CRTSCTS) {
+		spin_lock_irqsave(&info->lock,flags);
+		info->serial_signals |= SerialSignal_RTS;
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+}
+
+/* set or clear transmit break condition
+ * break_state	-1=set break condition, 0=clear
+ */
+static int set_break(struct tty_struct *tty, int break_state)
+{
+	unsigned char RegValue;
+	SLMP_INFO * info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s set_break(%d)\n",
+			 __FILE__,__LINE__, info->device_name, break_state);
+
+	if (sanity_check(info, tty->name, "set_break"))
+		return -EINVAL;
+
+	spin_lock_irqsave(&info->lock,flags);
+	RegValue = read_reg(info, CTL);
+ 	if (break_state == -1)
+		RegValue |= BIT3;
+	else
+		RegValue &= ~BIT3;
+	write_reg(info, CTL, RegValue);
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+#if SYNCLINK_GENERIC_HDLC
+
+/**
+ * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
+ * set encoding and frame check sequence (FCS) options
+ *
+ * dev       pointer to network device structure
+ * encoding  serial encoding setting
+ * parity    FCS setting
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
+			  unsigned short parity)
+{
+	SLMP_INFO *info = dev_to_port(dev);
+	unsigned char  new_encoding;
+	unsigned short new_crctype;
+
+	/* return error if TTY interface open */
+	if (info->port.count)
+		return -EBUSY;
+
+	switch (encoding)
+	{
+	case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
+	case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
+	case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
+	case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
+	case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
+	default: return -EINVAL;
+	}
+
+	switch (parity)
+	{
+	case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
+	case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
+	case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
+	default: return -EINVAL;
+	}
+
+	info->params.encoding = new_encoding;
+	info->params.crc_type = new_crctype;
+
+	/* if network interface up, reprogram hardware */
+	if (info->netcount)
+		program_hw(info);
+
+	return 0;
+}
+
+/**
+ * called by generic HDLC layer to send frame
+ *
+ * skb  socket buffer containing HDLC frame
+ * dev  pointer to network device structure
+ */
+static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
+				      struct net_device *dev)
+{
+	SLMP_INFO *info = dev_to_port(dev);
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
+
+	/* stop sending until this frame completes */
+	netif_stop_queue(dev);
+
+	/* copy data to device buffers */
+	info->tx_count = skb->len;
+	tx_load_dma_buffer(info, skb->data, skb->len);
+
+	/* update network statistics */
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
+
+	/* done with socket buffer, so free it */
+	dev_kfree_skb(skb);
+
+	/* save start time for transmit timeout detection */
+	dev->trans_start = jiffies;
+
+	/* start hardware transmitter if necessary */
+	spin_lock_irqsave(&info->lock,flags);
+	if (!info->tx_active)
+	 	tx_start(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * called by network layer when interface enabled
+ * claim resources and initialize hardware
+ *
+ * dev  pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_open(struct net_device *dev)
+{
+	SLMP_INFO *info = dev_to_port(dev);
+	int rc;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
+
+	/* generic HDLC layer open processing */
+	if ((rc = hdlc_open(dev)))
+		return rc;
+
+	/* arbitrate between network and tty opens */
+	spin_lock_irqsave(&info->netlock, flags);
+	if (info->port.count != 0 || info->netcount != 0) {
+		printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
+		spin_unlock_irqrestore(&info->netlock, flags);
+		return -EBUSY;
+	}
+	info->netcount=1;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	/* claim resources and init adapter */
+	if ((rc = startup(info)) != 0) {
+		spin_lock_irqsave(&info->netlock, flags);
+		info->netcount=0;
+		spin_unlock_irqrestore(&info->netlock, flags);
+		return rc;
+	}
+
+	/* assert DTR and RTS, apply hardware settings */
+	info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	program_hw(info);
+
+	/* enable network layer transmit */
+	dev->trans_start = jiffies;
+	netif_start_queue(dev);
+
+	/* inform generic HDLC layer of current DCD status */
+	spin_lock_irqsave(&info->lock, flags);
+	get_signals(info);
+	spin_unlock_irqrestore(&info->lock, flags);
+	if (info->serial_signals & SerialSignal_DCD)
+		netif_carrier_on(dev);
+	else
+		netif_carrier_off(dev);
+	return 0;
+}
+
+/**
+ * called by network layer when interface is disabled
+ * shutdown hardware and release resources
+ *
+ * dev  pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_close(struct net_device *dev)
+{
+	SLMP_INFO *info = dev_to_port(dev);
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
+
+	netif_stop_queue(dev);
+
+	/* shutdown adapter and release resources */
+	shutdown(info);
+
+	hdlc_close(dev);
+
+	spin_lock_irqsave(&info->netlock, flags);
+	info->netcount=0;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	return 0;
+}
+
+/**
+ * called by network layer to process IOCTL call to network device
+ *
+ * dev  pointer to network device structure
+ * ifr  pointer to network interface request structure
+ * cmd  IOCTL command code
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	const size_t size = sizeof(sync_serial_settings);
+	sync_serial_settings new_line;
+	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+	SLMP_INFO *info = dev_to_port(dev);
+	unsigned int flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
+
+	/* return error if TTY interface open */
+	if (info->port.count)
+		return -EBUSY;
+
+	if (cmd != SIOCWANDEV)
+		return hdlc_ioctl(dev, ifr, cmd);
+
+	switch(ifr->ifr_settings.type) {
+	case IF_GET_IFACE: /* return current sync_serial_settings */
+
+		ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+		if (ifr->ifr_settings.size < size) {
+			ifr->ifr_settings.size = size; /* data size wanted */
+			return -ENOBUFS;
+		}
+
+		flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
+
+		switch (flags){
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
+		case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
+		default: new_line.clock_type = CLOCK_DEFAULT;
+		}
+
+		new_line.clock_rate = info->params.clock_speed;
+		new_line.loopback   = info->params.loopback ? 1:0;
+
+		if (copy_to_user(line, &new_line, size))
+			return -EFAULT;
+		return 0;
+
+	case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
+
+		if(!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&new_line, line, size))
+			return -EFAULT;
+
+		switch (new_line.clock_type)
+		{
+		case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
+		case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
+		case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
+		case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
+		case CLOCK_DEFAULT:  flags = info->params.flags &
+					     (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
+		default: return -EINVAL;
+		}
+
+		if (new_line.loopback != 0 && new_line.loopback != 1)
+			return -EINVAL;
+
+		info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
+		info->params.flags |= flags;
+
+		info->params.loopback = new_line.loopback;
+
+		if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
+			info->params.clock_speed = new_line.clock_rate;
+		else
+			info->params.clock_speed = 0;
+
+		/* if network interface up, reprogram hardware */
+		if (info->netcount)
+			program_hw(info);
+		return 0;
+
+	default:
+		return hdlc_ioctl(dev, ifr, cmd);
+	}
+}
+
+/**
+ * called by network layer when transmit timeout is detected
+ *
+ * dev  pointer to network device structure
+ */
+static void hdlcdev_tx_timeout(struct net_device *dev)
+{
+	SLMP_INFO *info = dev_to_port(dev);
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("hdlcdev_tx_timeout(%s)\n",dev->name);
+
+	dev->stats.tx_errors++;
+	dev->stats.tx_aborted_errors++;
+
+	spin_lock_irqsave(&info->lock,flags);
+	tx_stop(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	netif_wake_queue(dev);
+}
+
+/**
+ * called by device driver when transmit completes
+ * reenable network layer transmit if stopped
+ *
+ * info  pointer to device instance information
+ */
+static void hdlcdev_tx_done(SLMP_INFO *info)
+{
+	if (netif_queue_stopped(info->netdev))
+		netif_wake_queue(info->netdev);
+}
+
+/**
+ * called by device driver when frame received
+ * pass frame to network layer
+ *
+ * info  pointer to device instance information
+ * buf   pointer to buffer contianing frame data
+ * size  count of data bytes in buf
+ */
+static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
+{
+	struct sk_buff *skb = dev_alloc_skb(size);
+	struct net_device *dev = info->netdev;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("hdlcdev_rx(%s)\n",dev->name);
+
+	if (skb == NULL) {
+		printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
+		       dev->name);
+		dev->stats.rx_dropped++;
+		return;
+	}
+
+	memcpy(skb_put(skb, size), buf, size);
+
+	skb->protocol = hdlc_type_trans(skb, dev);
+
+	dev->stats.rx_packets++;
+	dev->stats.rx_bytes += size;
+
+	netif_rx(skb);
+}
+
+static const struct net_device_ops hdlcdev_ops = {
+	.ndo_open       = hdlcdev_open,
+	.ndo_stop       = hdlcdev_close,
+	.ndo_change_mtu = hdlc_change_mtu,
+	.ndo_start_xmit = hdlc_start_xmit,
+	.ndo_do_ioctl   = hdlcdev_ioctl,
+	.ndo_tx_timeout = hdlcdev_tx_timeout,
+};
+
+/**
+ * called by device driver when adding device instance
+ * do generic HDLC initialization
+ *
+ * info  pointer to device instance information
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_init(SLMP_INFO *info)
+{
+	int rc;
+	struct net_device *dev;
+	hdlc_device *hdlc;
+
+	/* allocate and initialize network and HDLC layer objects */
+
+	if (!(dev = alloc_hdlcdev(info))) {
+		printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
+		return -ENOMEM;
+	}
+
+	/* for network layer reporting purposes only */
+	dev->mem_start = info->phys_sca_base;
+	dev->mem_end   = info->phys_sca_base + SCA_BASE_SIZE - 1;
+	dev->irq       = info->irq_level;
+
+	/* network layer callbacks and settings */
+	dev->netdev_ops	    = &hdlcdev_ops;
+	dev->watchdog_timeo = 10 * HZ;
+	dev->tx_queue_len   = 50;
+
+	/* generic HDLC layer callbacks and settings */
+	hdlc         = dev_to_hdlc(dev);
+	hdlc->attach = hdlcdev_attach;
+	hdlc->xmit   = hdlcdev_xmit;
+
+	/* register objects with HDLC layer */
+	if ((rc = register_hdlc_device(dev))) {
+		printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
+		free_netdev(dev);
+		return rc;
+	}
+
+	info->netdev = dev;
+	return 0;
+}
+
+/**
+ * called by device driver when removing device instance
+ * do generic HDLC cleanup
+ *
+ * info  pointer to device instance information
+ */
+static void hdlcdev_exit(SLMP_INFO *info)
+{
+	unregister_hdlc_device(info->netdev);
+	free_netdev(info->netdev);
+	info->netdev = NULL;
+}
+
+#endif /* CONFIG_HDLC */
+
+
+/* Return next bottom half action to perform.
+ * Return Value:	BH action code or 0 if nothing to do.
+ */
+static int bh_action(SLMP_INFO *info)
+{
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	if (info->pending_bh & BH_RECEIVE) {
+		info->pending_bh &= ~BH_RECEIVE;
+		rc = BH_RECEIVE;
+	} else if (info->pending_bh & BH_TRANSMIT) {
+		info->pending_bh &= ~BH_TRANSMIT;
+		rc = BH_TRANSMIT;
+	} else if (info->pending_bh & BH_STATUS) {
+		info->pending_bh &= ~BH_STATUS;
+		rc = BH_STATUS;
+	}
+
+	if (!rc) {
+		/* Mark BH routine as complete */
+		info->bh_running = false;
+		info->bh_requested = false;
+	}
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return rc;
+}
+
+/* Perform bottom half processing of work items queued by ISR.
+ */
+static void bh_handler(struct work_struct *work)
+{
+	SLMP_INFO *info = container_of(work, SLMP_INFO, task);
+	int action;
+
+	if (!info)
+		return;
+
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):%s bh_handler() entry\n",
+			__FILE__,__LINE__,info->device_name);
+
+	info->bh_running = true;
+
+	while((action = bh_action(info)) != 0) {
+
+		/* Process work item */
+		if ( debug_level >= DEBUG_LEVEL_BH )
+			printk( "%s(%d):%s bh_handler() work item action=%d\n",
+				__FILE__,__LINE__,info->device_name, action);
+
+		switch (action) {
+
+		case BH_RECEIVE:
+			bh_receive(info);
+			break;
+		case BH_TRANSMIT:
+			bh_transmit(info);
+			break;
+		case BH_STATUS:
+			bh_status(info);
+			break;
+		default:
+			/* unknown work item ID */
+			printk("%s(%d):%s Unknown work item ID=%08X!\n",
+				__FILE__,__LINE__,info->device_name,action);
+			break;
+		}
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):%s bh_handler() exit\n",
+			__FILE__,__LINE__,info->device_name);
+}
+
+static void bh_receive(SLMP_INFO *info)
+{
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):%s bh_receive()\n",
+			__FILE__,__LINE__,info->device_name);
+
+	while( rx_get_frame(info) );
+}
+
+static void bh_transmit(SLMP_INFO *info)
+{
+	struct tty_struct *tty = info->port.tty;
+
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):%s bh_transmit() entry\n",
+			__FILE__,__LINE__,info->device_name);
+
+	if (tty)
+		tty_wakeup(tty);
+}
+
+static void bh_status(SLMP_INFO *info)
+{
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):%s bh_status() entry\n",
+			__FILE__,__LINE__,info->device_name);
+
+	info->ri_chkcount = 0;
+	info->dsr_chkcount = 0;
+	info->dcd_chkcount = 0;
+	info->cts_chkcount = 0;
+}
+
+static void isr_timer(SLMP_INFO * info)
+{
+	unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
+
+	/* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
+	write_reg(info, IER2, 0);
+
+	/* TMCS, Timer Control/Status Register
+	 *
+	 * 07      CMF, Compare match flag (read only) 1=match
+	 * 06      ECMI, CMF Interrupt Enable: 0=disabled
+	 * 05      Reserved, must be 0
+	 * 04      TME, Timer Enable
+	 * 03..00  Reserved, must be 0
+	 *
+	 * 0000 0000
+	 */
+	write_reg(info, (unsigned char)(timer + TMCS), 0);
+
+	info->irq_occurred = true;
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_timer()\n",
+			__FILE__,__LINE__,info->device_name);
+}
+
+static void isr_rxint(SLMP_INFO * info)
+{
+ 	struct tty_struct *tty = info->port.tty;
+ 	struct	mgsl_icount *icount = &info->icount;
+	unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
+	unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
+
+	/* clear status bits */
+	if (status)
+		write_reg(info, SR1, status);
+
+	if (status2)
+		write_reg(info, SR2, status2);
+	
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_rxint status=%02X %02x\n",
+			__FILE__,__LINE__,info->device_name,status,status2);
+
+	if (info->params.mode == MGSL_MODE_ASYNC) {
+		if (status & BRKD) {
+			icount->brk++;
+
+			/* process break detection if tty control
+			 * is not set to ignore it
+			 */
+			if ( tty ) {
+				if (!(status & info->ignore_status_mask1)) {
+					if (info->read_status_mask1 & BRKD) {
+						tty_insert_flip_char(tty, 0, TTY_BREAK);
+						if (info->port.flags & ASYNC_SAK)
+							do_SAK(tty);
+					}
+				}
+			}
+		}
+	}
+	else {
+		if (status & (FLGD|IDLD)) {
+			if (status & FLGD)
+				info->icount.exithunt++;
+			else if (status & IDLD)
+				info->icount.rxidle++;
+			wake_up_interruptible(&info->event_wait_q);
+		}
+	}
+
+	if (status & CDCD) {
+		/* simulate a common modem status change interrupt
+		 * for our handler
+		 */
+		get_signals( info );
+		isr_io_pin(info,
+			MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
+	}
+}
+
+/*
+ * handle async rx data interrupts
+ */
+static void isr_rxrdy(SLMP_INFO * info)
+{
+	u16 status;
+	unsigned char DataByte;
+ 	struct tty_struct *tty = info->port.tty;
+ 	struct	mgsl_icount *icount = &info->icount;
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_rxrdy\n",
+			__FILE__,__LINE__,info->device_name);
+
+	while((status = read_reg(info,CST0)) & BIT0)
+	{
+		int flag = 0;
+		bool over = false;
+		DataByte = read_reg(info,TRB);
+
+		icount->rx++;
+
+		if ( status & (PE + FRME + OVRN) ) {
+			printk("%s(%d):%s rxerr=%04X\n",
+				__FILE__,__LINE__,info->device_name,status);
+
+			/* update error statistics */
+			if (status & PE)
+				icount->parity++;
+			else if (status & FRME)
+				icount->frame++;
+			else if (status & OVRN)
+				icount->overrun++;
+
+			/* discard char if tty control flags say so */
+			if (status & info->ignore_status_mask2)
+				continue;
+
+			status &= info->read_status_mask2;
+
+			if ( tty ) {
+				if (status & PE)
+					flag = TTY_PARITY;
+				else if (status & FRME)
+					flag = TTY_FRAME;
+				if (status & OVRN) {
+					/* Overrun is special, since it's
+					 * reported immediately, and doesn't
+					 * affect the current character
+					 */
+					over = true;
+				}
+			}
+		}	/* end of if (error) */
+
+		if ( tty ) {
+			tty_insert_flip_char(tty, DataByte, flag);
+			if (over)
+				tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		}
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_ISR ) {
+		printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
+			__FILE__,__LINE__,info->device_name,
+			icount->rx,icount->brk,icount->parity,
+			icount->frame,icount->overrun);
+	}
+
+	if ( tty )
+		tty_flip_buffer_push(tty);
+}
+
+static void isr_txeom(SLMP_INFO * info, unsigned char status)
+{
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_txeom status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status);
+
+	write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
+	write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
+	write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
+
+	if (status & UDRN) {
+		write_reg(info, CMD, TXRESET);
+		write_reg(info, CMD, TXENABLE);
+	} else
+		write_reg(info, CMD, TXBUFCLR);
+
+	/* disable and clear tx interrupts */
+	info->ie0_value &= ~TXRDYE;
+	info->ie1_value &= ~(IDLE + UDRN);
+	write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
+	write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
+
+	if ( info->tx_active ) {
+		if (info->params.mode != MGSL_MODE_ASYNC) {
+			if (status & UDRN)
+				info->icount.txunder++;
+			else if (status & IDLE)
+				info->icount.txok++;
+		}
+
+		info->tx_active = false;
+		info->tx_count = info->tx_put = info->tx_get = 0;
+
+		del_timer(&info->tx_timer);
+
+		if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
+			info->serial_signals &= ~SerialSignal_RTS;
+			info->drop_rts_on_tx_done = false;
+			set_signals(info);
+		}
+
+#if SYNCLINK_GENERIC_HDLC
+		if (info->netcount)
+			hdlcdev_tx_done(info);
+		else
+#endif
+		{
+			if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
+				tx_stop(info);
+				return;
+			}
+			info->pending_bh |= BH_TRANSMIT;
+		}
+	}
+}
+
+
+/*
+ * handle tx status interrupts
+ */
+static void isr_txint(SLMP_INFO * info)
+{
+	unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
+
+	/* clear status bits */
+	write_reg(info, SR1, status);
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_txint status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status);
+
+	if (status & (UDRN + IDLE))
+		isr_txeom(info, status);
+
+	if (status & CCTS) {
+		/* simulate a common modem status change interrupt
+		 * for our handler
+		 */
+		get_signals( info );
+		isr_io_pin(info,
+			MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
+
+	}
+}
+
+/*
+ * handle async tx data interrupts
+ */
+static void isr_txrdy(SLMP_INFO * info)
+{
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
+			__FILE__,__LINE__,info->device_name,info->tx_count);
+
+	if (info->params.mode != MGSL_MODE_ASYNC) {
+		/* disable TXRDY IRQ, enable IDLE IRQ */
+		info->ie0_value &= ~TXRDYE;
+		info->ie1_value |= IDLE;
+		write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
+		return;
+	}
+
+	if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
+		tx_stop(info);
+		return;
+	}
+
+	if ( info->tx_count )
+		tx_load_fifo( info );
+	else {
+		info->tx_active = false;
+		info->ie0_value &= ~TXRDYE;
+		write_reg(info, IE0, info->ie0_value);
+	}
+
+	if (info->tx_count < WAKEUP_CHARS)
+		info->pending_bh |= BH_TRANSMIT;
+}
+
+static void isr_rxdmaok(SLMP_INFO * info)
+{
+	/* BIT7 = EOT (end of transfer)
+	 * BIT6 = EOM (end of message/frame)
+	 */
+	unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
+
+	/* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
+	write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status);
+
+	info->pending_bh |= BH_RECEIVE;
+}
+
+static void isr_rxdmaerror(SLMP_INFO * info)
+{
+	/* BIT5 = BOF (buffer overflow)
+	 * BIT4 = COF (counter overflow)
+	 */
+	unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
+
+	/* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
+	write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status);
+
+	info->rx_overflow = true;
+	info->pending_bh |= BH_RECEIVE;
+}
+
+static void isr_txdmaok(SLMP_INFO * info)
+{
+	unsigned char status_reg1 = read_reg(info, SR1);
+
+	write_reg(info, TXDMA + DIR, 0x00);	/* disable Tx DMA IRQs */
+	write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
+	write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status_reg1);
+
+	/* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
+	write_reg16(info, TRC0, 0);
+	info->ie0_value |= TXRDYE;
+	write_reg(info, IE0, info->ie0_value);
+}
+
+static void isr_txdmaerror(SLMP_INFO * info)
+{
+	/* BIT5 = BOF (buffer overflow)
+	 * BIT4 = COF (counter overflow)
+	 */
+	unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
+
+	/* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
+	write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status);
+}
+
+/* handle input serial signal changes
+ */
+static void isr_io_pin( SLMP_INFO *info, u16 status )
+{
+ 	struct	mgsl_icount *icount;
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):isr_io_pin status=%04X\n",
+			__FILE__,__LINE__,status);
+
+	if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
+	              MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
+		icount = &info->icount;
+		/* update input line counters */
+		if (status & MISCSTATUS_RI_LATCHED) {
+			icount->rng++;
+			if ( status & SerialSignal_RI )
+				info->input_signal_events.ri_up++;
+			else
+				info->input_signal_events.ri_down++;
+		}
+		if (status & MISCSTATUS_DSR_LATCHED) {
+			icount->dsr++;
+			if ( status & SerialSignal_DSR )
+				info->input_signal_events.dsr_up++;
+			else
+				info->input_signal_events.dsr_down++;
+		}
+		if (status & MISCSTATUS_DCD_LATCHED) {
+			if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
+				info->ie1_value &= ~CDCD;
+				write_reg(info, IE1, info->ie1_value);
+			}
+			icount->dcd++;
+			if (status & SerialSignal_DCD) {
+				info->input_signal_events.dcd_up++;
+			} else
+				info->input_signal_events.dcd_down++;
+#if SYNCLINK_GENERIC_HDLC
+			if (info->netcount) {
+				if (status & SerialSignal_DCD)
+					netif_carrier_on(info->netdev);
+				else
+					netif_carrier_off(info->netdev);
+			}
+#endif
+		}
+		if (status & MISCSTATUS_CTS_LATCHED)
+		{
+			if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
+				info->ie1_value &= ~CCTS;
+				write_reg(info, IE1, info->ie1_value);
+			}
+			icount->cts++;
+			if ( status & SerialSignal_CTS )
+				info->input_signal_events.cts_up++;
+			else
+				info->input_signal_events.cts_down++;
+		}
+		wake_up_interruptible(&info->status_event_wait_q);
+		wake_up_interruptible(&info->event_wait_q);
+
+		if ( (info->port.flags & ASYNC_CHECK_CD) &&
+		     (status & MISCSTATUS_DCD_LATCHED) ) {
+			if ( debug_level >= DEBUG_LEVEL_ISR )
+				printk("%s CD now %s...", info->device_name,
+				       (status & SerialSignal_DCD) ? "on" : "off");
+			if (status & SerialSignal_DCD)
+				wake_up_interruptible(&info->port.open_wait);
+			else {
+				if ( debug_level >= DEBUG_LEVEL_ISR )
+					printk("doing serial hangup...");
+				if (info->port.tty)
+					tty_hangup(info->port.tty);
+			}
+		}
+
+		if ( (info->port.flags & ASYNC_CTS_FLOW) &&
+		     (status & MISCSTATUS_CTS_LATCHED) ) {
+			if ( info->port.tty ) {
+				if (info->port.tty->hw_stopped) {
+					if (status & SerialSignal_CTS) {
+						if ( debug_level >= DEBUG_LEVEL_ISR )
+							printk("CTS tx start...");
+			 			info->port.tty->hw_stopped = 0;
+						tx_start(info);
+						info->pending_bh |= BH_TRANSMIT;
+						return;
+					}
+				} else {
+					if (!(status & SerialSignal_CTS)) {
+						if ( debug_level >= DEBUG_LEVEL_ISR )
+							printk("CTS tx stop...");
+			 			info->port.tty->hw_stopped = 1;
+						tx_stop(info);
+					}
+				}
+			}
+		}
+	}
+
+	info->pending_bh |= BH_STATUS;
+}
+
+/* Interrupt service routine entry point.
+ *
+ * Arguments:
+ * 	irq		interrupt number that caused interrupt
+ * 	dev_id		device ID supplied during interrupt registration
+ * 	regs		interrupted processor context
+ */
+static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
+{
+	SLMP_INFO *info = dev_id;
+	unsigned char status, status0, status1=0;
+	unsigned char dmastatus, dmastatus0, dmastatus1=0;
+	unsigned char timerstatus0, timerstatus1=0;
+	unsigned char shift;
+	unsigned int i;
+	unsigned short tmp;
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n",
+			__FILE__, __LINE__, info->irq_level);
+
+	spin_lock(&info->lock);
+
+	for(;;) {
+
+		/* get status for SCA0 (ports 0-1) */
+		tmp = read_reg16(info, ISR0);	/* get ISR0 and ISR1 in one read */
+		status0 = (unsigned char)tmp;
+		dmastatus0 = (unsigned char)(tmp>>8);
+		timerstatus0 = read_reg(info, ISR2);
+
+		if ( debug_level >= DEBUG_LEVEL_ISR )
+			printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
+				__FILE__, __LINE__, info->device_name,
+				status0, dmastatus0, timerstatus0);
+
+		if (info->port_count == 4) {
+			/* get status for SCA1 (ports 2-3) */
+			tmp = read_reg16(info->port_array[2], ISR0);
+			status1 = (unsigned char)tmp;
+			dmastatus1 = (unsigned char)(tmp>>8);
+			timerstatus1 = read_reg(info->port_array[2], ISR2);
+
+			if ( debug_level >= DEBUG_LEVEL_ISR )
+				printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
+					__FILE__,__LINE__,info->device_name,
+					status1,dmastatus1,timerstatus1);
+		}
+
+		if (!status0 && !dmastatus0 && !timerstatus0 &&
+			 !status1 && !dmastatus1 && !timerstatus1)
+			break;
+
+		for(i=0; i < info->port_count ; i++) {
+			if (info->port_array[i] == NULL)
+				continue;
+			if (i < 2) {
+				status = status0;
+				dmastatus = dmastatus0;
+			} else {
+				status = status1;
+				dmastatus = dmastatus1;
+			}
+
+			shift = i & 1 ? 4 :0;
+
+			if (status & BIT0 << shift)
+				isr_rxrdy(info->port_array[i]);
+			if (status & BIT1 << shift)
+				isr_txrdy(info->port_array[i]);
+			if (status & BIT2 << shift)
+				isr_rxint(info->port_array[i]);
+			if (status & BIT3 << shift)
+				isr_txint(info->port_array[i]);
+
+			if (dmastatus & BIT0 << shift)
+				isr_rxdmaerror(info->port_array[i]);
+			if (dmastatus & BIT1 << shift)
+				isr_rxdmaok(info->port_array[i]);
+			if (dmastatus & BIT2 << shift)
+				isr_txdmaerror(info->port_array[i]);
+			if (dmastatus & BIT3 << shift)
+				isr_txdmaok(info->port_array[i]);
+		}
+
+		if (timerstatus0 & (BIT5 | BIT4))
+			isr_timer(info->port_array[0]);
+		if (timerstatus0 & (BIT7 | BIT6))
+			isr_timer(info->port_array[1]);
+		if (timerstatus1 & (BIT5 | BIT4))
+			isr_timer(info->port_array[2]);
+		if (timerstatus1 & (BIT7 | BIT6))
+			isr_timer(info->port_array[3]);
+	}
+
+	for(i=0; i < info->port_count ; i++) {
+		SLMP_INFO * port = info->port_array[i];
+
+		/* Request bottom half processing if there's something
+		 * for it to do and the bh is not already running.
+		 *
+		 * Note: startup adapter diags require interrupts.
+		 * do not request bottom half processing if the
+		 * device is not open in a normal mode.
+		 */
+		if ( port && (port->port.count || port->netcount) &&
+		     port->pending_bh && !port->bh_running &&
+		     !port->bh_requested ) {
+			if ( debug_level >= DEBUG_LEVEL_ISR )
+				printk("%s(%d):%s queueing bh task.\n",
+					__FILE__,__LINE__,port->device_name);
+			schedule_work(&port->task);
+			port->bh_requested = true;
+		}
+	}
+
+	spin_unlock(&info->lock);
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n",
+			__FILE__, __LINE__, info->irq_level);
+	return IRQ_HANDLED;
+}
+
+/* Initialize and start device.
+ */
+static int startup(SLMP_INFO * info)
+{
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
+
+	if (info->port.flags & ASYNC_INITIALIZED)
+		return 0;
+
+	if (!info->tx_buf) {
+		info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
+		if (!info->tx_buf) {
+			printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
+				__FILE__,__LINE__,info->device_name);
+			return -ENOMEM;
+		}
+	}
+
+	info->pending_bh = 0;
+
+	memset(&info->icount, 0, sizeof(info->icount));
+
+	/* program hardware for current parameters */
+	reset_port(info);
+
+	change_params(info);
+
+	mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
+
+	if (info->port.tty)
+		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+
+	info->port.flags |= ASYNC_INITIALIZED;
+
+	return 0;
+}
+
+/* Called by close() and hangup() to shutdown hardware
+ */
+static void shutdown(SLMP_INFO * info)
+{
+	unsigned long flags;
+
+	if (!(info->port.flags & ASYNC_INITIALIZED))
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s synclinkmp_shutdown()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	/* clear status wait queue because status changes */
+	/* can't happen after shutting down the hardware */
+	wake_up_interruptible(&info->status_event_wait_q);
+	wake_up_interruptible(&info->event_wait_q);
+
+	del_timer(&info->tx_timer);
+	del_timer(&info->status_timer);
+
+	kfree(info->tx_buf);
+	info->tx_buf = NULL;
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	reset_port(info);
+
+ 	if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+ 		info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+		set_signals(info);
+	}
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	if (info->port.tty)
+		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+
+	info->port.flags &= ~ASYNC_INITIALIZED;
+}
+
+static void program_hw(SLMP_INFO *info)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	rx_stop(info);
+	tx_stop(info);
+
+	info->tx_count = info->tx_put = info->tx_get = 0;
+
+	if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
+		hdlc_mode(info);
+	else
+		async_mode(info);
+
+	set_signals(info);
+
+	info->dcd_chkcount = 0;
+	info->cts_chkcount = 0;
+	info->ri_chkcount = 0;
+	info->dsr_chkcount = 0;
+
+	info->ie1_value |= (CDCD|CCTS);
+	write_reg(info, IE1, info->ie1_value);
+
+	get_signals(info);
+
+	if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
+		rx_start(info);
+
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Reconfigure adapter based on new parameters
+ */
+static void change_params(SLMP_INFO *info)
+{
+	unsigned cflag;
+	int bits_per_char;
+
+	if (!info->port.tty || !info->port.tty->termios)
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s change_params()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	cflag = info->port.tty->termios->c_cflag;
+
+	/* if B0 rate (hangup) specified then negate DTR and RTS */
+	/* otherwise assert DTR and RTS */
+ 	if (cflag & CBAUD)
+		info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+
+	/* byte size and parity */
+
+	switch (cflag & CSIZE) {
+	      case CS5: info->params.data_bits = 5; break;
+	      case CS6: info->params.data_bits = 6; break;
+	      case CS7: info->params.data_bits = 7; break;
+	      case CS8: info->params.data_bits = 8; break;
+	      /* Never happens, but GCC is too dumb to figure it out */
+	      default:  info->params.data_bits = 7; break;
+	      }
+
+	if (cflag & CSTOPB)
+		info->params.stop_bits = 2;
+	else
+		info->params.stop_bits = 1;
+
+	info->params.parity = ASYNC_PARITY_NONE;
+	if (cflag & PARENB) {
+		if (cflag & PARODD)
+			info->params.parity = ASYNC_PARITY_ODD;
+		else
+			info->params.parity = ASYNC_PARITY_EVEN;
+#ifdef CMSPAR
+		if (cflag & CMSPAR)
+			info->params.parity = ASYNC_PARITY_SPACE;
+#endif
+	}
+
+	/* calculate number of jiffies to transmit a full
+	 * FIFO (32 bytes) at specified data rate
+	 */
+	bits_per_char = info->params.data_bits +
+			info->params.stop_bits + 1;
+
+	/* if port data rate is set to 460800 or less then
+	 * allow tty settings to override, otherwise keep the
+	 * current data rate.
+	 */
+	if (info->params.data_rate <= 460800) {
+		info->params.data_rate = tty_get_baud_rate(info->port.tty);
+	}
+
+	if ( info->params.data_rate ) {
+		info->timeout = (32*HZ*bits_per_char) /
+				info->params.data_rate;
+	}
+	info->timeout += HZ/50;		/* Add .02 seconds of slop */
+
+	if (cflag & CRTSCTS)
+		info->port.flags |= ASYNC_CTS_FLOW;
+	else
+		info->port.flags &= ~ASYNC_CTS_FLOW;
+
+	if (cflag & CLOCAL)
+		info->port.flags &= ~ASYNC_CHECK_CD;
+	else
+		info->port.flags |= ASYNC_CHECK_CD;
+
+	/* process tty input control flags */
+
+	info->read_status_mask2 = OVRN;
+	if (I_INPCK(info->port.tty))
+		info->read_status_mask2 |= PE | FRME;
+ 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+ 		info->read_status_mask1 |= BRKD;
+	if (I_IGNPAR(info->port.tty))
+		info->ignore_status_mask2 |= PE | FRME;
+	if (I_IGNBRK(info->port.tty)) {
+		info->ignore_status_mask1 |= BRKD;
+		/* If ignoring parity and break indicators, ignore
+		 * overruns too.  (For real raw support).
+		 */
+		if (I_IGNPAR(info->port.tty))
+			info->ignore_status_mask2 |= OVRN;
+	}
+
+	program_hw(info);
+}
+
+static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
+{
+	int err;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s get_params()\n",
+			 __FILE__,__LINE__, info->device_name);
+
+	if (!user_icount) {
+		memset(&info->icount, 0, sizeof(info->icount));
+	} else {
+		mutex_lock(&info->port.mutex);
+		COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
+		mutex_unlock(&info->port.mutex);
+		if (err)
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
+{
+	int err;
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s get_params()\n",
+			 __FILE__,__LINE__, info->device_name);
+
+	mutex_lock(&info->port.mutex);
+	COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
+	mutex_unlock(&info->port.mutex);
+	if (err) {
+		if ( debug_level >= DEBUG_LEVEL_INFO )
+			printk( "%s(%d):%s get_params() user buffer copy failed\n",
+				__FILE__,__LINE__,info->device_name);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
+{
+ 	unsigned long flags;
+	MGSL_PARAMS tmp_params;
+	int err;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s set_params\n",
+			__FILE__,__LINE__,info->device_name );
+	COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
+	if (err) {
+		if ( debug_level >= DEBUG_LEVEL_INFO )
+			printk( "%s(%d):%s set_params() user buffer copy failed\n",
+				__FILE__,__LINE__,info->device_name);
+		return -EFAULT;
+	}
+
+	mutex_lock(&info->port.mutex);
+	spin_lock_irqsave(&info->lock,flags);
+	memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
+	spin_unlock_irqrestore(&info->lock,flags);
+
+ 	change_params(info);
+	mutex_unlock(&info->port.mutex);
+
+	return 0;
+}
+
+static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
+{
+	int err;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s get_txidle()=%d\n",
+			 __FILE__,__LINE__, info->device_name, info->idle_mode);
+
+	COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
+	if (err) {
+		if ( debug_level >= DEBUG_LEVEL_INFO )
+			printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
+				__FILE__,__LINE__,info->device_name);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int set_txidle(SLMP_INFO * info, int idle_mode)
+{
+ 	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s set_txidle(%d)\n",
+			__FILE__,__LINE__,info->device_name, idle_mode );
+
+	spin_lock_irqsave(&info->lock,flags);
+	info->idle_mode = idle_mode;
+	tx_set_idle( info );
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+static int tx_enable(SLMP_INFO * info, int enable)
+{
+ 	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s tx_enable(%d)\n",
+			__FILE__,__LINE__,info->device_name, enable);
+
+	spin_lock_irqsave(&info->lock,flags);
+	if ( enable ) {
+		if ( !info->tx_enabled ) {
+			tx_start(info);
+		}
+	} else {
+		if ( info->tx_enabled )
+			tx_stop(info);
+	}
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+/* abort send HDLC frame
+ */
+static int tx_abort(SLMP_INFO * info)
+{
+ 	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s tx_abort()\n",
+			__FILE__,__LINE__,info->device_name);
+
+	spin_lock_irqsave(&info->lock,flags);
+	if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
+		info->ie1_value &= ~UDRN;
+		info->ie1_value |= IDLE;
+		write_reg(info, IE1, info->ie1_value);	/* disable tx status interrupts */
+		write_reg(info, SR1, (unsigned char)(IDLE + UDRN));	/* clear pending */
+
+		write_reg(info, TXDMA + DSR, 0);		/* disable DMA channel */
+		write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
+
+   		write_reg(info, CMD, TXABORT);
+	}
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+static int rx_enable(SLMP_INFO * info, int enable)
+{
+ 	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s rx_enable(%d)\n",
+			__FILE__,__LINE__,info->device_name,enable);
+
+	spin_lock_irqsave(&info->lock,flags);
+	if ( enable ) {
+		if ( !info->rx_enabled )
+			rx_start(info);
+	} else {
+		if ( info->rx_enabled )
+			rx_stop(info);
+	}
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+/* wait for specified event to occur
+ */
+static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
+{
+ 	unsigned long flags;
+	int s;
+	int rc=0;
+	struct mgsl_icount cprev, cnow;
+	int events;
+	int mask;
+	struct	_input_signal_events oldsigs, newsigs;
+	DECLARE_WAITQUEUE(wait, current);
+
+	COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
+	if (rc) {
+		return  -EFAULT;
+	}
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s wait_mgsl_event(%d)\n",
+			__FILE__,__LINE__,info->device_name,mask);
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	/* return immediately if state matches requested events */
+	get_signals(info);
+	s = info->serial_signals;
+
+	events = mask &
+		( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
+ 		  ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
+		  ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
+		  ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
+	if (events) {
+		spin_unlock_irqrestore(&info->lock,flags);
+		goto exit;
+	}
+
+	/* save current irq counts */
+	cprev = info->icount;
+	oldsigs = info->input_signal_events;
+
+	/* enable hunt and idle irqs if needed */
+	if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
+		unsigned char oldval = info->ie1_value;
+		unsigned char newval = oldval +
+			 (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
+			 (mask & MgslEvent_IdleReceived ? IDLD:0);
+		if ( oldval != newval ) {
+			info->ie1_value = newval;
+			write_reg(info, IE1, info->ie1_value);
+		}
+	}
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&info->event_wait_q, &wait);
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	for(;;) {
+		schedule();
+		if (signal_pending(current)) {
+			rc = -ERESTARTSYS;
+			break;
+		}
+
+		/* get current irq counts */
+		spin_lock_irqsave(&info->lock,flags);
+		cnow = info->icount;
+		newsigs = info->input_signal_events;
+		set_current_state(TASK_INTERRUPTIBLE);
+		spin_unlock_irqrestore(&info->lock,flags);
+
+		/* if no change, wait aborted for some reason */
+		if (newsigs.dsr_up   == oldsigs.dsr_up   &&
+		    newsigs.dsr_down == oldsigs.dsr_down &&
+		    newsigs.dcd_up   == oldsigs.dcd_up   &&
+		    newsigs.dcd_down == oldsigs.dcd_down &&
+		    newsigs.cts_up   == oldsigs.cts_up   &&
+		    newsigs.cts_down == oldsigs.cts_down &&
+		    newsigs.ri_up    == oldsigs.ri_up    &&
+		    newsigs.ri_down  == oldsigs.ri_down  &&
+		    cnow.exithunt    == cprev.exithunt   &&
+		    cnow.rxidle      == cprev.rxidle) {
+			rc = -EIO;
+			break;
+		}
+
+		events = mask &
+			( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
+			  (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
+			  (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
+			  (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
+			  (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
+			  (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
+			  (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
+			  (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
+			  (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
+			  (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
+		if (events)
+			break;
+
+		cprev = cnow;
+		oldsigs = newsigs;
+	}
+
+	remove_wait_queue(&info->event_wait_q, &wait);
+	set_current_state(TASK_RUNNING);
+
+
+	if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
+		spin_lock_irqsave(&info->lock,flags);
+		if (!waitqueue_active(&info->event_wait_q)) {
+			/* disable enable exit hunt mode/idle rcvd IRQs */
+			info->ie1_value &= ~(FLGD|IDLD);
+			write_reg(info, IE1, info->ie1_value);
+		}
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+exit:
+	if ( rc == 0 )
+		PUT_USER(rc, events, mask_ptr);
+
+	return rc;
+}
+
+static int modem_input_wait(SLMP_INFO *info,int arg)
+{
+ 	unsigned long flags;
+	int rc;
+	struct mgsl_icount cprev, cnow;
+	DECLARE_WAITQUEUE(wait, current);
+
+	/* save current irq counts */
+	spin_lock_irqsave(&info->lock,flags);
+	cprev = info->icount;
+	add_wait_queue(&info->status_event_wait_q, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	for(;;) {
+		schedule();
+		if (signal_pending(current)) {
+			rc = -ERESTARTSYS;
+			break;
+		}
+
+		/* get new irq counts */
+		spin_lock_irqsave(&info->lock,flags);
+		cnow = info->icount;
+		set_current_state(TASK_INTERRUPTIBLE);
+		spin_unlock_irqrestore(&info->lock,flags);
+
+		/* if no change, wait aborted for some reason */
+		if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+		    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
+			rc = -EIO;
+			break;
+		}
+
+		/* check for change in caller specified modem input */
+		if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
+		    (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
+		    (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
+		    (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
+			rc = 0;
+			break;
+		}
+
+		cprev = cnow;
+	}
+	remove_wait_queue(&info->status_event_wait_q, &wait);
+	set_current_state(TASK_RUNNING);
+	return rc;
+}
+
+/* return the state of the serial control and status signals
+ */
+static int tiocmget(struct tty_struct *tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned int result;
+ 	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+ 	get_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
+		((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
+		((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
+		((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
+		((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
+		((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s tiocmget() value=%08X\n",
+			 __FILE__,__LINE__, info->device_name, result );
+	return result;
+}
+
+/* set modem control signals (DTR/RTS)
+ */
+static int tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear)
+{
+	SLMP_INFO *info = tty->driver_data;
+ 	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s tiocmset(%x,%x)\n",
+			__FILE__,__LINE__,info->device_name, set, clear);
+
+	if (set & TIOCM_RTS)
+		info->serial_signals |= SerialSignal_RTS;
+	if (set & TIOCM_DTR)
+		info->serial_signals |= SerialSignal_DTR;
+	if (clear & TIOCM_RTS)
+		info->serial_signals &= ~SerialSignal_RTS;
+	if (clear & TIOCM_DTR)
+		info->serial_signals &= ~SerialSignal_DTR;
+
+	spin_lock_irqsave(&info->lock,flags);
+ 	set_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return 0;
+}
+
+static int carrier_raised(struct tty_port *port)
+{
+	SLMP_INFO *info = container_of(port, SLMP_INFO, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+ 	get_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
+}
+
+static void dtr_rts(struct tty_port *port, int on)
+{
+	SLMP_INFO *info = container_of(port, SLMP_INFO, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	if (on)
+		info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ 	set_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Block the current process until the specified port is ready to open.
+ */
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+			   SLMP_INFO *info)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	int		retval;
+	bool		do_clocal = false;
+	bool		extra_count = false;
+	unsigned long	flags;
+	int		cd;
+	struct tty_port *port = &info->port;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s block_til_ready()\n",
+			 __FILE__,__LINE__, tty->driver->name );
+
+	if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
+		/* nonblock mode is set or port is not enabled */
+		/* just verify that callout device is not active */
+		port->flags |= ASYNC_NORMAL_ACTIVE;
+		return 0;
+	}
+
+	if (tty->termios->c_cflag & CLOCAL)
+		do_clocal = true;
+
+	/* Wait for carrier detect and the line to become
+	 * free (i.e., not in use by the callout).  While we are in
+	 * this loop, port->count is dropped by one, so that
+	 * close() knows when to free things.  We restore it upon
+	 * exit, either normal or abnormal.
+	 */
+
+	retval = 0;
+	add_wait_queue(&port->open_wait, &wait);
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s block_til_ready() before block, count=%d\n",
+			 __FILE__,__LINE__, tty->driver->name, port->count );
+
+	spin_lock_irqsave(&info->lock, flags);
+	if (!tty_hung_up_p(filp)) {
+		extra_count = true;
+		port->count--;
+	}
+	spin_unlock_irqrestore(&info->lock, flags);
+	port->blocked_open++;
+
+	while (1) {
+		if (tty->termios->c_cflag & CBAUD)
+			tty_port_raise_dtr_rts(port);
+
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
+			retval = (port->flags & ASYNC_HUP_NOTIFY) ?
+					-EAGAIN : -ERESTARTSYS;
+			break;
+		}
+
+		cd = tty_port_carrier_raised(port);
+
+ 		if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
+ 			break;
+
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			break;
+		}
+
+		if (debug_level >= DEBUG_LEVEL_INFO)
+			printk("%s(%d):%s block_til_ready() count=%d\n",
+				 __FILE__,__LINE__, tty->driver->name, port->count );
+
+		tty_unlock();
+		schedule();
+		tty_lock();
+	}
+
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&port->open_wait, &wait);
+
+	if (extra_count)
+		port->count++;
+	port->blocked_open--;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s block_til_ready() after, count=%d\n",
+			 __FILE__,__LINE__, tty->driver->name, port->count );
+
+	if (!retval)
+		port->flags |= ASYNC_NORMAL_ACTIVE;
+
+	return retval;
+}
+
+static int alloc_dma_bufs(SLMP_INFO *info)
+{
+	unsigned short BuffersPerFrame;
+	unsigned short BufferCount;
+
+	// Force allocation to start at 64K boundary for each port.
+	// This is necessary because *all* buffer descriptors for a port
+	// *must* be in the same 64K block. All descriptors on a port
+	// share a common 'base' address (upper 8 bits of 24 bits) programmed
+	// into the CBP register.
+	info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
+
+	/* Calculate the number of DMA buffers necessary to hold the */
+	/* largest allowable frame size. Note: If the max frame size is */
+	/* not an even multiple of the DMA buffer size then we need to */
+	/* round the buffer count per frame up one. */
+
+	BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
+	if ( info->max_frame_size % SCABUFSIZE )
+		BuffersPerFrame++;
+
+	/* calculate total number of data buffers (SCABUFSIZE) possible
+	 * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
+	 * for the descriptor list (BUFFERLISTSIZE).
+	 */
+	BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
+
+	/* limit number of buffers to maximum amount of descriptors */
+	if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
+		BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
+
+	/* use enough buffers to transmit one max size frame */
+	info->tx_buf_count = BuffersPerFrame + 1;
+
+	/* never use more than half the available buffers for transmit */
+	if (info->tx_buf_count > (BufferCount/2))
+		info->tx_buf_count = BufferCount/2;
+
+	if (info->tx_buf_count > SCAMAXDESC)
+		info->tx_buf_count = SCAMAXDESC;
+
+	/* use remaining buffers for receive */
+	info->rx_buf_count = BufferCount - info->tx_buf_count;
+
+	if (info->rx_buf_count > SCAMAXDESC)
+		info->rx_buf_count = SCAMAXDESC;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
+			__FILE__,__LINE__, info->device_name,
+			info->tx_buf_count,info->rx_buf_count);
+
+	if ( alloc_buf_list( info ) < 0 ||
+		alloc_frame_bufs(info,
+		  			info->rx_buf_list,
+		  			info->rx_buf_list_ex,
+					info->rx_buf_count) < 0 ||
+		alloc_frame_bufs(info,
+					info->tx_buf_list,
+					info->tx_buf_list_ex,
+					info->tx_buf_count) < 0 ||
+		alloc_tmp_rx_buf(info) < 0 ) {
+		printk("%s(%d):%s Can't allocate DMA buffer memory\n",
+			__FILE__,__LINE__, info->device_name);
+		return -ENOMEM;
+	}
+
+	rx_reset_buffers( info );
+
+	return 0;
+}
+
+/* Allocate DMA buffers for the transmit and receive descriptor lists.
+ */
+static int alloc_buf_list(SLMP_INFO *info)
+{
+	unsigned int i;
+
+	/* build list in adapter shared memory */
+	info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
+	info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
+	info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
+
+	memset(info->buffer_list, 0, BUFFERLISTSIZE);
+
+	/* Save virtual address pointers to the receive and */
+	/* transmit buffer lists. (Receive 1st). These pointers will */
+	/* be used by the processor to access the lists. */
+	info->rx_buf_list = (SCADESC *)info->buffer_list;
+
+	info->tx_buf_list = (SCADESC *)info->buffer_list;
+	info->tx_buf_list += info->rx_buf_count;
+
+	/* Build links for circular buffer entry lists (tx and rx)
+	 *
+	 * Note: links are physical addresses read by the SCA device
+	 * to determine the next buffer entry to use.
+	 */
+
+	for ( i = 0; i < info->rx_buf_count; i++ ) {
+		/* calculate and store physical address of this buffer entry */
+		info->rx_buf_list_ex[i].phys_entry =
+			info->buffer_list_phys + (i * sizeof(SCABUFSIZE));
+
+		/* calculate and store physical address of */
+		/* next entry in cirular list of entries */
+		info->rx_buf_list[i].next = info->buffer_list_phys;
+		if ( i < info->rx_buf_count - 1 )
+			info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
+
+		info->rx_buf_list[i].length = SCABUFSIZE;
+	}
+
+	for ( i = 0; i < info->tx_buf_count; i++ ) {
+		/* calculate and store physical address of this buffer entry */
+		info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
+			((info->rx_buf_count + i) * sizeof(SCADESC));
+
+		/* calculate and store physical address of */
+		/* next entry in cirular list of entries */
+
+		info->tx_buf_list[i].next = info->buffer_list_phys +
+			info->rx_buf_count * sizeof(SCADESC);
+
+		if ( i < info->tx_buf_count - 1 )
+			info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
+	}
+
+	return 0;
+}
+
+/* Allocate the frame DMA buffers used by the specified buffer list.
+ */
+static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
+{
+	int i;
+	unsigned long phys_addr;
+
+	for ( i = 0; i < count; i++ ) {
+		buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
+		phys_addr = info->port_array[0]->last_mem_alloc;
+		info->port_array[0]->last_mem_alloc += SCABUFSIZE;
+
+		buf_list[i].buf_ptr  = (unsigned short)phys_addr;
+		buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
+	}
+
+	return 0;
+}
+
+static void free_dma_bufs(SLMP_INFO *info)
+{
+	info->buffer_list = NULL;
+	info->rx_buf_list = NULL;
+	info->tx_buf_list = NULL;
+}
+
+/* allocate buffer large enough to hold max_frame_size.
+ * This buffer is used to pass an assembled frame to the line discipline.
+ */
+static int alloc_tmp_rx_buf(SLMP_INFO *info)
+{
+	info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
+	if (info->tmp_rx_buf == NULL)
+		return -ENOMEM;
+	return 0;
+}
+
+static void free_tmp_rx_buf(SLMP_INFO *info)
+{
+	kfree(info->tmp_rx_buf);
+	info->tmp_rx_buf = NULL;
+}
+
+static int claim_resources(SLMP_INFO *info)
+{
+	if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
+		printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_memory_base);
+		info->init_error = DiagStatus_AddressConflict;
+		goto errout;
+	}
+	else
+		info->shared_mem_requested = true;
+
+	if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
+		printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_lcr_base);
+		info->init_error = DiagStatus_AddressConflict;
+		goto errout;
+	}
+	else
+		info->lcr_mem_requested = true;
+
+	if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
+		printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_sca_base);
+		info->init_error = DiagStatus_AddressConflict;
+		goto errout;
+	}
+	else
+		info->sca_base_requested = true;
+
+	if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
+		printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
+		info->init_error = DiagStatus_AddressConflict;
+		goto errout;
+	}
+	else
+		info->sca_statctrl_requested = true;
+
+	info->memory_base = ioremap_nocache(info->phys_memory_base,
+								SCA_MEM_SIZE);
+	if (!info->memory_base) {
+		printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_memory_base );
+		info->init_error = DiagStatus_CantAssignPciResources;
+		goto errout;
+	}
+
+	info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
+	if (!info->lcr_base) {
+		printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_lcr_base );
+		info->init_error = DiagStatus_CantAssignPciResources;
+		goto errout;
+	}
+	info->lcr_base += info->lcr_offset;
+
+	info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
+	if (!info->sca_base) {
+		printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_sca_base );
+		info->init_error = DiagStatus_CantAssignPciResources;
+		goto errout;
+	}
+	info->sca_base += info->sca_offset;
+
+	info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
+								PAGE_SIZE);
+	if (!info->statctrl_base) {
+		printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
+		info->init_error = DiagStatus_CantAssignPciResources;
+		goto errout;
+	}
+	info->statctrl_base += info->statctrl_offset;
+
+	if ( !memory_test(info) ) {
+		printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_memory_base );
+		info->init_error = DiagStatus_MemoryError;
+		goto errout;
+	}
+
+	return 0;
+
+errout:
+	release_resources( info );
+	return -ENODEV;
+}
+
+static void release_resources(SLMP_INFO *info)
+{
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):%s release_resources() entry\n",
+			__FILE__,__LINE__,info->device_name );
+
+	if ( info->irq_requested ) {
+		free_irq(info->irq_level, info);
+		info->irq_requested = false;
+	}
+
+	if ( info->shared_mem_requested ) {
+		release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
+		info->shared_mem_requested = false;
+	}
+	if ( info->lcr_mem_requested ) {
+		release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
+		info->lcr_mem_requested = false;
+	}
+	if ( info->sca_base_requested ) {
+		release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
+		info->sca_base_requested = false;
+	}
+	if ( info->sca_statctrl_requested ) {
+		release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
+		info->sca_statctrl_requested = false;
+	}
+
+	if (info->memory_base){
+		iounmap(info->memory_base);
+		info->memory_base = NULL;
+	}
+
+	if (info->sca_base) {
+		iounmap(info->sca_base - info->sca_offset);
+		info->sca_base=NULL;
+	}
+
+	if (info->statctrl_base) {
+		iounmap(info->statctrl_base - info->statctrl_offset);
+		info->statctrl_base=NULL;
+	}
+
+	if (info->lcr_base){
+		iounmap(info->lcr_base - info->lcr_offset);
+		info->lcr_base = NULL;
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):%s release_resources() exit\n",
+			__FILE__,__LINE__,info->device_name );
+}
+
+/* Add the specified device instance data structure to the
+ * global linked list of devices and increment the device count.
+ */
+static void add_device(SLMP_INFO *info)
+{
+	info->next_device = NULL;
+	info->line = synclinkmp_device_count;
+	sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
+
+	if (info->line < MAX_DEVICES) {
+		if (maxframe[info->line])
+			info->max_frame_size = maxframe[info->line];
+	}
+
+	synclinkmp_device_count++;
+
+	if ( !synclinkmp_device_list )
+		synclinkmp_device_list = info;
+	else {
+		SLMP_INFO *current_dev = synclinkmp_device_list;
+		while( current_dev->next_device )
+			current_dev = current_dev->next_device;
+		current_dev->next_device = info;
+	}
+
+	if ( info->max_frame_size < 4096 )
+		info->max_frame_size = 4096;
+	else if ( info->max_frame_size > 65535 )
+		info->max_frame_size = 65535;
+
+	printk( "SyncLink MultiPort %s: "
+		"Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
+		info->device_name,
+		info->phys_sca_base,
+		info->phys_memory_base,
+		info->phys_statctrl_base,
+		info->phys_lcr_base,
+		info->irq_level,
+		info->max_frame_size );
+
+#if SYNCLINK_GENERIC_HDLC
+	hdlcdev_init(info);
+#endif
+}
+
+static const struct tty_port_operations port_ops = {
+	.carrier_raised = carrier_raised,
+	.dtr_rts = dtr_rts,
+};
+
+/* Allocate and initialize a device instance structure
+ *
+ * Return Value:	pointer to SLMP_INFO if success, otherwise NULL
+ */
+static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
+{
+	SLMP_INFO *info;
+
+	info = kzalloc(sizeof(SLMP_INFO),
+		 GFP_KERNEL);
+
+	if (!info) {
+		printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
+			__FILE__,__LINE__, adapter_num, port_num);
+	} else {
+		tty_port_init(&info->port);
+		info->port.ops = &port_ops;
+		info->magic = MGSL_MAGIC;
+		INIT_WORK(&info->task, bh_handler);
+		info->max_frame_size = 4096;
+		info->port.close_delay = 5*HZ/10;
+		info->port.closing_wait = 30*HZ;
+		init_waitqueue_head(&info->status_event_wait_q);
+		init_waitqueue_head(&info->event_wait_q);
+		spin_lock_init(&info->netlock);
+		memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
+		info->idle_mode = HDLC_TXIDLE_FLAGS;
+		info->adapter_num = adapter_num;
+		info->port_num = port_num;
+
+		/* Copy configuration info to device instance data */
+		info->irq_level = pdev->irq;
+		info->phys_lcr_base = pci_resource_start(pdev,0);
+		info->phys_sca_base = pci_resource_start(pdev,2);
+		info->phys_memory_base = pci_resource_start(pdev,3);
+		info->phys_statctrl_base = pci_resource_start(pdev,4);
+
+		/* Because veremap only works on page boundaries we must map
+		 * a larger area than is actually implemented for the LCR
+		 * memory range. We map a full page starting at the page boundary.
+		 */
+		info->lcr_offset    = info->phys_lcr_base & (PAGE_SIZE-1);
+		info->phys_lcr_base &= ~(PAGE_SIZE-1);
+
+		info->sca_offset    = info->phys_sca_base & (PAGE_SIZE-1);
+		info->phys_sca_base &= ~(PAGE_SIZE-1);
+
+		info->statctrl_offset    = info->phys_statctrl_base & (PAGE_SIZE-1);
+		info->phys_statctrl_base &= ~(PAGE_SIZE-1);
+
+		info->bus_type = MGSL_BUS_TYPE_PCI;
+		info->irq_flags = IRQF_SHARED;
+
+		setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
+		setup_timer(&info->status_timer, status_timeout,
+				(unsigned long)info);
+
+		/* Store the PCI9050 misc control register value because a flaw
+		 * in the PCI9050 prevents LCR registers from being read if
+		 * BIOS assigns an LCR base address with bit 7 set.
+		 *
+		 * Only the misc control register is accessed for which only
+		 * write access is needed, so set an initial value and change
+		 * bits to the device instance data as we write the value
+		 * to the actual misc control register.
+		 */
+		info->misc_ctrl_value = 0x087e4546;
+
+		/* initial port state is unknown - if startup errors
+		 * occur, init_error will be set to indicate the
+		 * problem. Once the port is fully initialized,
+		 * this value will be set to 0 to indicate the
+		 * port is available.
+		 */
+		info->init_error = -1;
+	}
+
+	return info;
+}
+
+static void device_init(int adapter_num, struct pci_dev *pdev)
+{
+	SLMP_INFO *port_array[SCA_MAX_PORTS];
+	int port;
+
+	/* allocate device instances for up to SCA_MAX_PORTS devices */
+	for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
+		port_array[port] = alloc_dev(adapter_num,port,pdev);
+		if( port_array[port] == NULL ) {
+			for ( --port; port >= 0; --port )
+				kfree(port_array[port]);
+			return;
+		}
+	}
+
+	/* give copy of port_array to all ports and add to device list  */
+	for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
+		memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
+		add_device( port_array[port] );
+		spin_lock_init(&port_array[port]->lock);
+	}
+
+	/* Allocate and claim adapter resources */
+	if ( !claim_resources(port_array[0]) ) {
+
+		alloc_dma_bufs(port_array[0]);
+
+		/* copy resource information from first port to others */
+		for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
+			port_array[port]->lock  = port_array[0]->lock;
+			port_array[port]->irq_level     = port_array[0]->irq_level;
+			port_array[port]->memory_base   = port_array[0]->memory_base;
+			port_array[port]->sca_base      = port_array[0]->sca_base;
+			port_array[port]->statctrl_base = port_array[0]->statctrl_base;
+			port_array[port]->lcr_base      = port_array[0]->lcr_base;
+			alloc_dma_bufs(port_array[port]);
+		}
+
+		if ( request_irq(port_array[0]->irq_level,
+					synclinkmp_interrupt,
+					port_array[0]->irq_flags,
+					port_array[0]->device_name,
+					port_array[0]) < 0 ) {
+			printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n",
+				__FILE__,__LINE__,
+				port_array[0]->device_name,
+				port_array[0]->irq_level );
+		}
+		else {
+			port_array[0]->irq_requested = true;
+			adapter_test(port_array[0]);
+		}
+	}
+}
+
+static const struct tty_operations ops = {
+	.open = open,
+	.close = close,
+	.write = write,
+	.put_char = put_char,
+	.flush_chars = flush_chars,
+	.write_room = write_room,
+	.chars_in_buffer = chars_in_buffer,
+	.flush_buffer = flush_buffer,
+	.ioctl = ioctl,
+	.throttle = throttle,
+	.unthrottle = unthrottle,
+	.send_xchar = send_xchar,
+	.break_ctl = set_break,
+	.wait_until_sent = wait_until_sent,
+	.set_termios = set_termios,
+	.stop = tx_hold,
+	.start = tx_release,
+	.hangup = hangup,
+	.tiocmget = tiocmget,
+	.tiocmset = tiocmset,
+	.get_icount = get_icount,
+	.proc_fops = &synclinkmp_proc_fops,
+};
+
+
+static void synclinkmp_cleanup(void)
+{
+	int rc;
+	SLMP_INFO *info;
+	SLMP_INFO *tmp;
+
+	printk("Unloading %s %s\n", driver_name, driver_version);
+
+	if (serial_driver) {
+		if ((rc = tty_unregister_driver(serial_driver)))
+			printk("%s(%d) failed to unregister tty driver err=%d\n",
+			       __FILE__,__LINE__,rc);
+		put_tty_driver(serial_driver);
+	}
+
+	/* reset devices */
+	info = synclinkmp_device_list;
+	while(info) {
+		reset_port(info);
+		info = info->next_device;
+	}
+
+	/* release devices */
+	info = synclinkmp_device_list;
+	while(info) {
+#if SYNCLINK_GENERIC_HDLC
+		hdlcdev_exit(info);
+#endif
+		free_dma_bufs(info);
+		free_tmp_rx_buf(info);
+		if ( info->port_num == 0 ) {
+			if (info->sca_base)
+				write_reg(info, LPR, 1); /* set low power mode */
+			release_resources(info);
+		}
+		tmp = info;
+		info = info->next_device;
+		kfree(tmp);
+	}
+
+	pci_unregister_driver(&synclinkmp_pci_driver);
+}
+
+/* Driver initialization entry point.
+ */
+
+static int __init synclinkmp_init(void)
+{
+	int rc;
+
+	if (break_on_load) {
+	 	synclinkmp_get_text_ptr();
+  		BREAKPOINT();
+	}
+
+ 	printk("%s %s\n", driver_name, driver_version);
+
+	if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
+		printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
+		return rc;
+	}
+
+	serial_driver = alloc_tty_driver(128);
+	if (!serial_driver) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	/* Initialize the tty_driver structure */
+
+	serial_driver->owner = THIS_MODULE;
+	serial_driver->driver_name = "synclinkmp";
+	serial_driver->name = "ttySLM";
+	serial_driver->major = ttymajor;
+	serial_driver->minor_start = 64;
+	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	serial_driver->subtype = SERIAL_TYPE_NORMAL;
+	serial_driver->init_termios = tty_std_termios;
+	serial_driver->init_termios.c_cflag =
+		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	serial_driver->init_termios.c_ispeed = 9600;
+	serial_driver->init_termios.c_ospeed = 9600;
+	serial_driver->flags = TTY_DRIVER_REAL_RAW;
+	tty_set_operations(serial_driver, &ops);
+	if ((rc = tty_register_driver(serial_driver)) < 0) {
+		printk("%s(%d):Couldn't register serial driver\n",
+			__FILE__,__LINE__);
+		put_tty_driver(serial_driver);
+		serial_driver = NULL;
+		goto error;
+	}
+
+ 	printk("%s %s, tty major#%d\n",
+		driver_name, driver_version,
+		serial_driver->major);
+
+	return 0;
+
+error:
+	synclinkmp_cleanup();
+	return rc;
+}
+
+static void __exit synclinkmp_exit(void)
+{
+	synclinkmp_cleanup();
+}
+
+module_init(synclinkmp_init);
+module_exit(synclinkmp_exit);
+
+/* Set the port for internal loopback mode.
+ * The TxCLK and RxCLK signals are generated from the BRG and
+ * the TxD is looped back to the RxD internally.
+ */
+static void enable_loopback(SLMP_INFO *info, int enable)
+{
+	if (enable) {
+		/* MD2 (Mode Register 2)
+		 * 01..00  CNCT<1..0> Channel Connection 11=Local Loopback
+		 */
+		write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
+
+		/* degate external TxC clock source */
+		info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
+		write_control_reg(info);
+
+		/* RXS/TXS (Rx/Tx clock source)
+		 * 07      Reserved, must be 0
+		 * 06..04  Clock Source, 100=BRG
+		 * 03..00  Clock Divisor, 0000=1
+		 */
+		write_reg(info, RXS, 0x40);
+		write_reg(info, TXS, 0x40);
+
+	} else {
+		/* MD2 (Mode Register 2)
+	 	 * 01..00  CNCT<1..0> Channel connection, 0=normal
+		 */
+		write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
+
+		/* RXS/TXS (Rx/Tx clock source)
+		 * 07      Reserved, must be 0
+		 * 06..04  Clock Source, 000=RxC/TxC Pin
+		 * 03..00  Clock Divisor, 0000=1
+		 */
+		write_reg(info, RXS, 0x00);
+		write_reg(info, TXS, 0x00);
+	}
+
+	/* set LinkSpeed if available, otherwise default to 2Mbps */
+	if (info->params.clock_speed)
+		set_rate(info, info->params.clock_speed);
+	else
+		set_rate(info, 3686400);
+}
+
+/* Set the baud rate register to the desired speed
+ *
+ *	data_rate	data rate of clock in bits per second
+ *			A data rate of 0 disables the AUX clock.
+ */
+static void set_rate( SLMP_INFO *info, u32 data_rate )
+{
+       	u32 TMCValue;
+       	unsigned char BRValue;
+	u32 Divisor=0;
+
+	/* fBRG = fCLK/(TMC * 2^BR)
+	 */
+	if (data_rate != 0) {
+		Divisor = 14745600/data_rate;
+		if (!Divisor)
+			Divisor = 1;
+
+		TMCValue = Divisor;
+
+		BRValue = 0;
+		if (TMCValue != 1 && TMCValue != 2) {
+			/* BRValue of 0 provides 50/50 duty cycle *only* when
+			 * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
+			 * 50/50 duty cycle.
+			 */
+			BRValue = 1;
+			TMCValue >>= 1;
+		}
+
+		/* while TMCValue is too big for TMC register, divide
+		 * by 2 and increment BR exponent.
+		 */
+		for(; TMCValue > 256 && BRValue < 10; BRValue++)
+			TMCValue >>= 1;
+
+		write_reg(info, TXS,
+			(unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
+		write_reg(info, RXS,
+			(unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
+		write_reg(info, TMC, (unsigned char)TMCValue);
+	}
+	else {
+		write_reg(info, TXS,0);
+		write_reg(info, RXS,0);
+		write_reg(info, TMC, 0);
+	}
+}
+
+/* Disable receiver
+ */
+static void rx_stop(SLMP_INFO *info)
+{
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):%s rx_stop()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	write_reg(info, CMD, RXRESET);
+
+	info->ie0_value &= ~RXRDYE;
+	write_reg(info, IE0, info->ie0_value);	/* disable Rx data interrupts */
+
+	write_reg(info, RXDMA + DSR, 0);	/* disable Rx DMA */
+	write_reg(info, RXDMA + DCMD, SWABORT);	/* reset/init Rx DMA */
+	write_reg(info, RXDMA + DIR, 0);	/* disable Rx DMA interrupts */
+
+	info->rx_enabled = false;
+	info->rx_overflow = false;
+}
+
+/* enable the receiver
+ */
+static void rx_start(SLMP_INFO *info)
+{
+	int i;
+
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):%s rx_start()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	write_reg(info, CMD, RXRESET);
+
+	if ( info->params.mode == MGSL_MODE_HDLC ) {
+		/* HDLC, disabe IRQ on rxdata */
+		info->ie0_value &= ~RXRDYE;
+		write_reg(info, IE0, info->ie0_value);
+
+		/* Reset all Rx DMA buffers and program rx dma */
+		write_reg(info, RXDMA + DSR, 0);		/* disable Rx DMA */
+		write_reg(info, RXDMA + DCMD, SWABORT);	/* reset/init Rx DMA */
+
+		for (i = 0; i < info->rx_buf_count; i++) {
+			info->rx_buf_list[i].status = 0xff;
+
+			// throttle to 4 shared memory writes at a time to prevent
+			// hogging local bus (keep latency time for DMA requests low).
+			if (!(i % 4))
+				read_status_reg(info);
+		}
+		info->current_rx_buf = 0;
+
+		/* set current/1st descriptor address */
+		write_reg16(info, RXDMA + CDA,
+			info->rx_buf_list_ex[0].phys_entry);
+
+		/* set new last rx descriptor address */
+		write_reg16(info, RXDMA + EDA,
+			info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
+
+		/* set buffer length (shared by all rx dma data buffers) */
+		write_reg16(info, RXDMA + BFL, SCABUFSIZE);
+
+		write_reg(info, RXDMA + DIR, 0x60);	/* enable Rx DMA interrupts (EOM/BOF) */
+		write_reg(info, RXDMA + DSR, 0xf2);	/* clear Rx DMA IRQs, enable Rx DMA */
+	} else {
+		/* async, enable IRQ on rxdata */
+		info->ie0_value |= RXRDYE;
+		write_reg(info, IE0, info->ie0_value);
+	}
+
+	write_reg(info, CMD, RXENABLE);
+
+	info->rx_overflow = false;
+	info->rx_enabled = true;
+}
+
+/* Enable the transmitter and send a transmit frame if
+ * one is loaded in the DMA buffers.
+ */
+static void tx_start(SLMP_INFO *info)
+{
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):%s tx_start() tx_count=%d\n",
+			 __FILE__,__LINE__, info->device_name,info->tx_count );
+
+	if (!info->tx_enabled ) {
+		write_reg(info, CMD, TXRESET);
+		write_reg(info, CMD, TXENABLE);
+		info->tx_enabled = true;
+	}
+
+	if ( info->tx_count ) {
+
+		/* If auto RTS enabled and RTS is inactive, then assert */
+		/* RTS and set a flag indicating that the driver should */
+		/* negate RTS when the transmission completes. */
+
+		info->drop_rts_on_tx_done = false;
+
+		if (info->params.mode != MGSL_MODE_ASYNC) {
+
+			if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
+				get_signals( info );
+				if ( !(info->serial_signals & SerialSignal_RTS) ) {
+					info->serial_signals |= SerialSignal_RTS;
+					set_signals( info );
+					info->drop_rts_on_tx_done = true;
+				}
+			}
+
+			write_reg16(info, TRC0,
+				(unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
+
+			write_reg(info, TXDMA + DSR, 0); 		/* disable DMA channel */
+			write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
+	
+			/* set TX CDA (current descriptor address) */
+			write_reg16(info, TXDMA + CDA,
+				info->tx_buf_list_ex[0].phys_entry);
+	
+			/* set TX EDA (last descriptor address) */
+			write_reg16(info, TXDMA + EDA,
+				info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
+	
+			/* enable underrun IRQ */
+			info->ie1_value &= ~IDLE;
+			info->ie1_value |= UDRN;
+			write_reg(info, IE1, info->ie1_value);
+			write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
+	
+			write_reg(info, TXDMA + DIR, 0x40);		/* enable Tx DMA interrupts (EOM) */
+			write_reg(info, TXDMA + DSR, 0xf2);		/* clear Tx DMA IRQs, enable Tx DMA */
+	
+			mod_timer(&info->tx_timer, jiffies +
+					msecs_to_jiffies(5000));
+		}
+		else {
+			tx_load_fifo(info);
+			/* async, enable IRQ on txdata */
+			info->ie0_value |= TXRDYE;
+			write_reg(info, IE0, info->ie0_value);
+		}
+
+		info->tx_active = true;
+	}
+}
+
+/* stop the transmitter and DMA
+ */
+static void tx_stop( SLMP_INFO *info )
+{
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):%s tx_stop()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	del_timer(&info->tx_timer);
+
+	write_reg(info, TXDMA + DSR, 0);		/* disable DMA channel */
+	write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
+
+	write_reg(info, CMD, TXRESET);
+
+	info->ie1_value &= ~(UDRN + IDLE);
+	write_reg(info, IE1, info->ie1_value);	/* disable tx status interrupts */
+	write_reg(info, SR1, (unsigned char)(IDLE + UDRN));	/* clear pending */
+
+	info->ie0_value &= ~TXRDYE;
+	write_reg(info, IE0, info->ie0_value);	/* disable tx data interrupts */
+
+	info->tx_enabled = false;
+	info->tx_active = false;
+}
+
+/* Fill the transmit FIFO until the FIFO is full or
+ * there is no more data to load.
+ */
+static void tx_load_fifo(SLMP_INFO *info)
+{
+	u8 TwoBytes[2];
+
+	/* do nothing is now tx data available and no XON/XOFF pending */
+
+	if ( !info->tx_count && !info->x_char )
+		return;
+
+	/* load the Transmit FIFO until FIFOs full or all data sent */
+
+	while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
+
+		/* there is more space in the transmit FIFO and */
+		/* there is more data in transmit buffer */
+
+		if ( (info->tx_count > 1) && !info->x_char ) {
+ 			/* write 16-bits */
+			TwoBytes[0] = info->tx_buf[info->tx_get++];
+			if (info->tx_get >= info->max_frame_size)
+				info->tx_get -= info->max_frame_size;
+			TwoBytes[1] = info->tx_buf[info->tx_get++];
+			if (info->tx_get >= info->max_frame_size)
+				info->tx_get -= info->max_frame_size;
+
+			write_reg16(info, TRB, *((u16 *)TwoBytes));
+
+			info->tx_count -= 2;
+			info->icount.tx += 2;
+		} else {
+			/* only 1 byte left to transmit or 1 FIFO slot left */
+
+			if (info->x_char) {
+				/* transmit pending high priority char */
+				write_reg(info, TRB, info->x_char);
+				info->x_char = 0;
+			} else {
+				write_reg(info, TRB, info->tx_buf[info->tx_get++]);
+				if (info->tx_get >= info->max_frame_size)
+					info->tx_get -= info->max_frame_size;
+				info->tx_count--;
+			}
+			info->icount.tx++;
+		}
+	}
+}
+
+/* Reset a port to a known state
+ */
+static void reset_port(SLMP_INFO *info)
+{
+	if (info->sca_base) {
+
+		tx_stop(info);
+		rx_stop(info);
+
+		info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+		set_signals(info);
+
+		/* disable all port interrupts */
+		info->ie0_value = 0;
+		info->ie1_value = 0;
+		info->ie2_value = 0;
+		write_reg(info, IE0, info->ie0_value);
+		write_reg(info, IE1, info->ie1_value);
+		write_reg(info, IE2, info->ie2_value);
+
+		write_reg(info, CMD, CHRESET);
+	}
+}
+
+/* Reset all the ports to a known state.
+ */
+static void reset_adapter(SLMP_INFO *info)
+{
+	int i;
+
+	for ( i=0; i < SCA_MAX_PORTS; ++i) {
+		if (info->port_array[i])
+			reset_port(info->port_array[i]);
+	}
+}
+
+/* Program port for asynchronous communications.
+ */
+static void async_mode(SLMP_INFO *info)
+{
+
+  	unsigned char RegValue;
+
+	tx_stop(info);
+	rx_stop(info);
+
+	/* MD0, Mode Register 0
+	 *
+	 * 07..05  PRCTL<2..0>, Protocol Mode, 000=async
+	 * 04      AUTO, Auto-enable (RTS/CTS/DCD)
+	 * 03      Reserved, must be 0
+	 * 02      CRCCC, CRC Calculation, 0=disabled
+	 * 01..00  STOP<1..0> Stop bits (00=1,10=2)
+	 *
+	 * 0000 0000
+	 */
+	RegValue = 0x00;
+	if (info->params.stop_bits != 1)
+		RegValue |= BIT1;
+	write_reg(info, MD0, RegValue);
+
+	/* MD1, Mode Register 1
+	 *
+	 * 07..06  BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
+	 * 05..04  TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
+	 * 03..02  RXCHR<1..0>, rx char size
+	 * 01..00  PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
+	 *
+	 * 0100 0000
+	 */
+	RegValue = 0x40;
+	switch (info->params.data_bits) {
+	case 7: RegValue |= BIT4 + BIT2; break;
+	case 6: RegValue |= BIT5 + BIT3; break;
+	case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
+	}
+	if (info->params.parity != ASYNC_PARITY_NONE) {
+		RegValue |= BIT1;
+		if (info->params.parity == ASYNC_PARITY_ODD)
+			RegValue |= BIT0;
+	}
+	write_reg(info, MD1, RegValue);
+
+	/* MD2, Mode Register 2
+	 *
+	 * 07..02  Reserved, must be 0
+	 * 01..00  CNCT<1..0> Channel connection, 00=normal 11=local loopback
+	 *
+	 * 0000 0000
+	 */
+	RegValue = 0x00;
+	if (info->params.loopback)
+		RegValue |= (BIT1 + BIT0);
+	write_reg(info, MD2, RegValue);
+
+	/* RXS, Receive clock source
+	 *
+	 * 07      Reserved, must be 0
+	 * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
+	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
+	 */
+	RegValue=BIT6;
+	write_reg(info, RXS, RegValue);
+
+	/* TXS, Transmit clock source
+	 *
+	 * 07      Reserved, must be 0
+	 * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
+	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
+	 */
+	RegValue=BIT6;
+	write_reg(info, TXS, RegValue);
+
+	/* Control Register
+	 *
+	 * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
+	 */
+	info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
+	write_control_reg(info);
+
+	tx_set_idle(info);
+
+	/* RRC Receive Ready Control 0
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
+	 */
+	write_reg(info, RRC, 0x00);
+
+	/* TRC0 Transmit Ready Control 0
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
+	 */
+	write_reg(info, TRC0, 0x10);
+
+	/* TRC1 Transmit Ready Control 1
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
+	 */
+	write_reg(info, TRC1, 0x1e);
+
+	/* CTL, MSCI control register
+	 *
+	 * 07..06  Reserved, set to 0
+	 * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
+	 * 04      IDLC, idle control, 0=mark 1=idle register
+	 * 03      BRK, break, 0=off 1 =on (async)
+	 * 02      SYNCLD, sync char load enable (BSC) 1=enabled
+	 * 01      GOP, go active on poll (LOOP mode) 1=enabled
+	 * 00      RTS, RTS output control, 0=active 1=inactive
+	 *
+	 * 0001 0001
+	 */
+	RegValue = 0x10;
+	if (!(info->serial_signals & SerialSignal_RTS))
+		RegValue |= 0x01;
+	write_reg(info, CTL, RegValue);
+
+	/* enable status interrupts */
+	info->ie0_value |= TXINTE + RXINTE;
+	write_reg(info, IE0, info->ie0_value);
+
+	/* enable break detect interrupt */
+	info->ie1_value = BRKD;
+	write_reg(info, IE1, info->ie1_value);
+
+	/* enable rx overrun interrupt */
+	info->ie2_value = OVRN;
+	write_reg(info, IE2, info->ie2_value);
+
+	set_rate( info, info->params.data_rate * 16 );
+}
+
+/* Program the SCA for HDLC communications.
+ */
+static void hdlc_mode(SLMP_INFO *info)
+{
+	unsigned char RegValue;
+	u32 DpllDivisor;
+
+	// Can't use DPLL because SCA outputs recovered clock on RxC when
+	// DPLL mode selected. This causes output contention with RxC receiver.
+	// Use of DPLL would require external hardware to disable RxC receiver
+	// when DPLL mode selected.
+	info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
+
+	/* disable DMA interrupts */
+	write_reg(info, TXDMA + DIR, 0);
+	write_reg(info, RXDMA + DIR, 0);
+
+	/* MD0, Mode Register 0
+	 *
+	 * 07..05  PRCTL<2..0>, Protocol Mode, 100=HDLC
+	 * 04      AUTO, Auto-enable (RTS/CTS/DCD)
+	 * 03      Reserved, must be 0
+	 * 02      CRCCC, CRC Calculation, 1=enabled
+	 * 01      CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
+	 * 00      CRC0, CRC initial value, 1 = all 1s
+	 *
+	 * 1000 0001
+	 */
+	RegValue = 0x81;
+	if (info->params.flags & HDLC_FLAG_AUTO_CTS)
+		RegValue |= BIT4;
+	if (info->params.flags & HDLC_FLAG_AUTO_DCD)
+		RegValue |= BIT4;
+	if (info->params.crc_type == HDLC_CRC_16_CCITT)
+		RegValue |= BIT2 + BIT1;
+	write_reg(info, MD0, RegValue);
+
+	/* MD1, Mode Register 1
+	 *
+	 * 07..06  ADDRS<1..0>, Address detect, 00=no addr check
+	 * 05..04  TXCHR<1..0>, tx char size, 00=8 bits
+	 * 03..02  RXCHR<1..0>, rx char size, 00=8 bits
+	 * 01..00  PMPM<1..0>, Parity mode, 00=no parity
+	 *
+	 * 0000 0000
+	 */
+	RegValue = 0x00;
+	write_reg(info, MD1, RegValue);
+
+	/* MD2, Mode Register 2
+	 *
+	 * 07      NRZFM, 0=NRZ, 1=FM
+	 * 06..05  CODE<1..0> Encoding, 00=NRZ
+	 * 04..03  DRATE<1..0> DPLL Divisor, 00=8
+	 * 02      Reserved, must be 0
+	 * 01..00  CNCT<1..0> Channel connection, 0=normal
+	 *
+	 * 0000 0000
+	 */
+	RegValue = 0x00;
+	switch(info->params.encoding) {
+	case HDLC_ENCODING_NRZI:	  RegValue |= BIT5; break;
+	case HDLC_ENCODING_BIPHASE_MARK:  RegValue |= BIT7 + BIT5; break; /* aka FM1 */
+	case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
+	case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; 	/* aka Manchester */
+#if 0
+	case HDLC_ENCODING_NRZB:	       				/* not supported */
+	case HDLC_ENCODING_NRZI_MARK:          				/* not supported */
+	case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: 				/* not supported */
+#endif
+	}
+	if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
+		DpllDivisor = 16;
+		RegValue |= BIT3;
+	} else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
+		DpllDivisor = 8;
+	} else {
+		DpllDivisor = 32;
+		RegValue |= BIT4;
+	}
+	write_reg(info, MD2, RegValue);
+
+
+	/* RXS, Receive clock source
+	 *
+	 * 07      Reserved, must be 0
+	 * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
+	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
+	 */
+	RegValue=0;
+	if (info->params.flags & HDLC_FLAG_RXC_BRG)
+		RegValue |= BIT6;
+	if (info->params.flags & HDLC_FLAG_RXC_DPLL)
+		RegValue |= BIT6 + BIT5;
+	write_reg(info, RXS, RegValue);
+
+	/* TXS, Transmit clock source
+	 *
+	 * 07      Reserved, must be 0
+	 * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
+	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
+	 */
+	RegValue=0;
+	if (info->params.flags & HDLC_FLAG_TXC_BRG)
+		RegValue |= BIT6;
+	if (info->params.flags & HDLC_FLAG_TXC_DPLL)
+		RegValue |= BIT6 + BIT5;
+	write_reg(info, TXS, RegValue);
+
+	if (info->params.flags & HDLC_FLAG_RXC_DPLL)
+		set_rate(info, info->params.clock_speed * DpllDivisor);
+	else
+		set_rate(info, info->params.clock_speed);
+
+	/* GPDATA (General Purpose I/O Data Register)
+	 *
+	 * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
+	 */
+	if (info->params.flags & HDLC_FLAG_TXC_BRG)
+		info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
+	else
+		info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
+	write_control_reg(info);
+
+	/* RRC Receive Ready Control 0
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  RRC<4..0> Rx FIFO trigger active
+	 */
+	write_reg(info, RRC, rx_active_fifo_level);
+
+	/* TRC0 Transmit Ready Control 0
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  TRC<4..0> Tx FIFO trigger active
+	 */
+	write_reg(info, TRC0, tx_active_fifo_level);
+
+	/* TRC1 Transmit Ready Control 1
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
+	 */
+	write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
+
+	/* DMR, DMA Mode Register
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04      TMOD, Transfer Mode: 1=chained-block
+	 * 03      Reserved, must be 0
+	 * 02      NF, Number of Frames: 1=multi-frame
+	 * 01      CNTE, Frame End IRQ Counter enable: 0=disabled
+	 * 00      Reserved, must be 0
+	 *
+	 * 0001 0100
+	 */
+	write_reg(info, TXDMA + DMR, 0x14);
+	write_reg(info, RXDMA + DMR, 0x14);
+
+	/* Set chain pointer base (upper 8 bits of 24 bit addr) */
+	write_reg(info, RXDMA + CPB,
+		(unsigned char)(info->buffer_list_phys >> 16));
+
+	/* Set chain pointer base (upper 8 bits of 24 bit addr) */
+	write_reg(info, TXDMA + CPB,
+		(unsigned char)(info->buffer_list_phys >> 16));
+
+	/* enable status interrupts. other code enables/disables
+	 * the individual sources for these two interrupt classes.
+	 */
+	info->ie0_value |= TXINTE + RXINTE;
+	write_reg(info, IE0, info->ie0_value);
+
+	/* CTL, MSCI control register
+	 *
+	 * 07..06  Reserved, set to 0
+	 * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
+	 * 04      IDLC, idle control, 0=mark 1=idle register
+	 * 03      BRK, break, 0=off 1 =on (async)
+	 * 02      SYNCLD, sync char load enable (BSC) 1=enabled
+	 * 01      GOP, go active on poll (LOOP mode) 1=enabled
+	 * 00      RTS, RTS output control, 0=active 1=inactive
+	 *
+	 * 0001 0001
+	 */
+	RegValue = 0x10;
+	if (!(info->serial_signals & SerialSignal_RTS))
+		RegValue |= 0x01;
+	write_reg(info, CTL, RegValue);
+
+	/* preamble not supported ! */
+
+	tx_set_idle(info);
+	tx_stop(info);
+	rx_stop(info);
+
+	set_rate(info, info->params.clock_speed);
+
+	if (info->params.loopback)
+		enable_loopback(info,1);
+}
+
+/* Set the transmit HDLC idle mode
+ */
+static void tx_set_idle(SLMP_INFO *info)
+{
+	unsigned char RegValue = 0xff;
+
+	/* Map API idle mode to SCA register bits */
+	switch(info->idle_mode) {
+	case HDLC_TXIDLE_FLAGS:			RegValue = 0x7e; break;
+	case HDLC_TXIDLE_ALT_ZEROS_ONES:	RegValue = 0xaa; break;
+	case HDLC_TXIDLE_ZEROS:			RegValue = 0x00; break;
+	case HDLC_TXIDLE_ONES:			RegValue = 0xff; break;
+	case HDLC_TXIDLE_ALT_MARK_SPACE:	RegValue = 0xaa; break;
+	case HDLC_TXIDLE_SPACE:			RegValue = 0x00; break;
+	case HDLC_TXIDLE_MARK:			RegValue = 0xff; break;
+	}
+
+	write_reg(info, IDL, RegValue);
+}
+
+/* Query the adapter for the state of the V24 status (input) signals.
+ */
+static void get_signals(SLMP_INFO *info)
+{
+	u16 status = read_reg(info, SR3);
+	u16 gpstatus = read_status_reg(info);
+	u16 testbit;
+
+	/* clear all serial signals except DTR and RTS */
+	info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
+
+	/* set serial signal bits to reflect MISR */
+
+	if (!(status & BIT3))
+		info->serial_signals |= SerialSignal_CTS;
+
+	if ( !(status & BIT2))
+		info->serial_signals |= SerialSignal_DCD;
+
+	testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
+	if (!(gpstatus & testbit))
+		info->serial_signals |= SerialSignal_RI;
+
+	testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
+	if (!(gpstatus & testbit))
+		info->serial_signals |= SerialSignal_DSR;
+}
+
+/* Set the state of DTR and RTS based on contents of
+ * serial_signals member of device context.
+ */
+static void set_signals(SLMP_INFO *info)
+{
+	unsigned char RegValue;
+	u16 EnableBit;
+
+	RegValue = read_reg(info, CTL);
+	if (info->serial_signals & SerialSignal_RTS)
+		RegValue &= ~BIT0;
+	else
+		RegValue |= BIT0;
+	write_reg(info, CTL, RegValue);
+
+	// Port 0..3 DTR is ctrl reg <1,3,5,7>
+	EnableBit = BIT1 << (info->port_num*2);
+	if (info->serial_signals & SerialSignal_DTR)
+		info->port_array[0]->ctrlreg_value &= ~EnableBit;
+	else
+		info->port_array[0]->ctrlreg_value |= EnableBit;
+	write_control_reg(info);
+}
+
+/*******************/
+/* DMA Buffer Code */
+/*******************/
+
+/* Set the count for all receive buffers to SCABUFSIZE
+ * and set the current buffer to the first buffer. This effectively
+ * makes all buffers free and discards any data in buffers.
+ */
+static void rx_reset_buffers(SLMP_INFO *info)
+{
+	rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
+}
+
+/* Free the buffers used by a received frame
+ *
+ * info   pointer to device instance data
+ * first  index of 1st receive buffer of frame
+ * last   index of last receive buffer of frame
+ */
+static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
+{
+	bool done = false;
+
+	while(!done) {
+	        /* reset current buffer for reuse */
+		info->rx_buf_list[first].status = 0xff;
+
+	        if (first == last) {
+	                done = true;
+	                /* set new last rx descriptor address */
+			write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
+	        }
+
+	        first++;
+		if (first == info->rx_buf_count)
+			first = 0;
+	}
+
+	/* set current buffer to next buffer after last buffer of frame */
+	info->current_rx_buf = first;
+}
+
+/* Return a received frame from the receive DMA buffers.
+ * Only frames received without errors are returned.
+ *
+ * Return Value:	true if frame returned, otherwise false
+ */
+static bool rx_get_frame(SLMP_INFO *info)
+{
+	unsigned int StartIndex, EndIndex;	/* index of 1st and last buffers of Rx frame */
+	unsigned short status;
+	unsigned int framesize = 0;
+	bool ReturnCode = false;
+	unsigned long flags;
+	struct tty_struct *tty = info->port.tty;
+	unsigned char addr_field = 0xff;
+   	SCADESC *desc;
+	SCADESC_EX *desc_ex;
+
+CheckAgain:
+	/* assume no frame returned, set zero length */
+	framesize = 0;
+	addr_field = 0xff;
+
+	/*
+	 * current_rx_buf points to the 1st buffer of the next available
+	 * receive frame. To find the last buffer of the frame look for
+	 * a non-zero status field in the buffer entries. (The status
+	 * field is set by the 16C32 after completing a receive frame.
+	 */
+	StartIndex = EndIndex = info->current_rx_buf;
+
+	for ( ;; ) {
+		desc = &info->rx_buf_list[EndIndex];
+		desc_ex = &info->rx_buf_list_ex[EndIndex];
+
+		if (desc->status == 0xff)
+			goto Cleanup;	/* current desc still in use, no frames available */
+
+		if (framesize == 0 && info->params.addr_filter != 0xff)
+			addr_field = desc_ex->virt_addr[0];
+
+		framesize += desc->length;
+
+		/* Status != 0 means last buffer of frame */
+		if (desc->status)
+			break;
+
+		EndIndex++;
+		if (EndIndex == info->rx_buf_count)
+			EndIndex = 0;
+
+		if (EndIndex == info->current_rx_buf) {
+			/* all buffers have been 'used' but none mark	   */
+			/* the end of a frame. Reset buffers and receiver. */
+			if ( info->rx_enabled ){
+				spin_lock_irqsave(&info->lock,flags);
+				rx_start(info);
+				spin_unlock_irqrestore(&info->lock,flags);
+			}
+			goto Cleanup;
+		}
+
+	}
+
+	/* check status of receive frame */
+
+	/* frame status is byte stored after frame data
+	 *
+	 * 7 EOM (end of msg), 1 = last buffer of frame
+	 * 6 Short Frame, 1 = short frame
+	 * 5 Abort, 1 = frame aborted
+	 * 4 Residue, 1 = last byte is partial
+	 * 3 Overrun, 1 = overrun occurred during frame reception
+	 * 2 CRC,     1 = CRC error detected
+	 *
+	 */
+	status = desc->status;
+
+	/* ignore CRC bit if not using CRC (bit is undefined) */
+	/* Note:CRC is not save to data buffer */
+	if (info->params.crc_type == HDLC_CRC_NONE)
+		status &= ~BIT2;
+
+	if (framesize == 0 ||
+		 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
+		/* discard 0 byte frames, this seems to occur sometime
+		 * when remote is idling flags.
+		 */
+		rx_free_frame_buffers(info, StartIndex, EndIndex);
+		goto CheckAgain;
+	}
+
+	if (framesize < 2)
+		status |= BIT6;
+
+	if (status & (BIT6+BIT5+BIT3+BIT2)) {
+		/* received frame has errors,
+		 * update counts and mark frame size as 0
+		 */
+		if (status & BIT6)
+			info->icount.rxshort++;
+		else if (status & BIT5)
+			info->icount.rxabort++;
+		else if (status & BIT3)
+			info->icount.rxover++;
+		else
+			info->icount.rxcrc++;
+
+		framesize = 0;
+#if SYNCLINK_GENERIC_HDLC
+		{
+			info->netdev->stats.rx_errors++;
+			info->netdev->stats.rx_frame_errors++;
+		}
+#endif
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
+			__FILE__,__LINE__,info->device_name,status,framesize);
+
+	if ( debug_level >= DEBUG_LEVEL_DATA )
+		trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
+			min_t(int, framesize,SCABUFSIZE),0);
+
+	if (framesize) {
+		if (framesize > info->max_frame_size)
+			info->icount.rxlong++;
+		else {
+			/* copy dma buffer(s) to contiguous intermediate buffer */
+			int copy_count = framesize;
+			int index = StartIndex;
+			unsigned char *ptmp = info->tmp_rx_buf;
+			info->tmp_rx_buf_count = framesize;
+
+			info->icount.rxok++;
+
+			while(copy_count) {
+				int partial_count = min(copy_count,SCABUFSIZE);
+				memcpy( ptmp,
+					info->rx_buf_list_ex[index].virt_addr,
+					partial_count );
+				ptmp += partial_count;
+				copy_count -= partial_count;
+
+				if ( ++index == info->rx_buf_count )
+					index = 0;
+			}
+
+#if SYNCLINK_GENERIC_HDLC
+			if (info->netcount)
+				hdlcdev_rx(info,info->tmp_rx_buf,framesize);
+			else
+#endif
+				ldisc_receive_buf(tty,info->tmp_rx_buf,
+						  info->flag_buf, framesize);
+		}
+	}
+	/* Free the buffers used by this frame. */
+	rx_free_frame_buffers( info, StartIndex, EndIndex );
+
+	ReturnCode = true;
+
+Cleanup:
+	if ( info->rx_enabled && info->rx_overflow ) {
+		/* Receiver is enabled, but needs to restarted due to
+		 * rx buffer overflow. If buffers are empty, restart receiver.
+		 */
+		if (info->rx_buf_list[EndIndex].status == 0xff) {
+			spin_lock_irqsave(&info->lock,flags);
+			rx_start(info);
+			spin_unlock_irqrestore(&info->lock,flags);
+		}
+	}
+
+	return ReturnCode;
+}
+
+/* load the transmit DMA buffer with data
+ */
+static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
+{
+	unsigned short copy_count;
+	unsigned int i = 0;
+	SCADESC *desc;
+	SCADESC_EX *desc_ex;
+
+	if ( debug_level >= DEBUG_LEVEL_DATA )
+		trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1);
+
+	/* Copy source buffer to one or more DMA buffers, starting with
+	 * the first transmit dma buffer.
+	 */
+	for(i=0;;)
+	{
+		copy_count = min_t(unsigned short,count,SCABUFSIZE);
+
+		desc = &info->tx_buf_list[i];
+		desc_ex = &info->tx_buf_list_ex[i];
+
+		load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
+
+		desc->length = copy_count;
+		desc->status = 0;
+
+		buf += copy_count;
+		count -= copy_count;
+
+		if (!count)
+			break;
+
+		i++;
+		if (i >= info->tx_buf_count)
+			i = 0;
+	}
+
+	info->tx_buf_list[i].status = 0x81;	/* set EOM and EOT status */
+	info->last_tx_buf = ++i;
+}
+
+static bool register_test(SLMP_INFO *info)
+{
+	static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
+	static unsigned int count = ARRAY_SIZE(testval);
+	unsigned int i;
+	bool rc = true;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	reset_port(info);
+
+	/* assume failure */
+	info->init_error = DiagStatus_AddressFailure;
+
+	/* Write bit patterns to various registers but do it out of */
+	/* sync, then read back and verify values. */
+
+	for (i = 0 ; i < count ; i++) {
+		write_reg(info, TMC, testval[i]);
+		write_reg(info, IDL, testval[(i+1)%count]);
+		write_reg(info, SA0, testval[(i+2)%count]);
+		write_reg(info, SA1, testval[(i+3)%count]);
+
+		if ( (read_reg(info, TMC) != testval[i]) ||
+			  (read_reg(info, IDL) != testval[(i+1)%count]) ||
+			  (read_reg(info, SA0) != testval[(i+2)%count]) ||
+			  (read_reg(info, SA1) != testval[(i+3)%count]) )
+		{
+			rc = false;
+			break;
+		}
+	}
+
+	reset_port(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return rc;
+}
+
+static bool irq_test(SLMP_INFO *info)
+{
+	unsigned long timeout;
+	unsigned long flags;
+
+	unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
+
+	spin_lock_irqsave(&info->lock,flags);
+	reset_port(info);
+
+	/* assume failure */
+	info->init_error = DiagStatus_IrqFailure;
+	info->irq_occurred = false;
+
+	/* setup timer0 on SCA0 to interrupt */
+
+	/* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
+	write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
+
+	write_reg(info, (unsigned char)(timer + TEPR), 0);	/* timer expand prescale */
+	write_reg16(info, (unsigned char)(timer + TCONR), 1);	/* timer constant */
+
+
+	/* TMCS, Timer Control/Status Register
+	 *
+	 * 07      CMF, Compare match flag (read only) 1=match
+	 * 06      ECMI, CMF Interrupt Enable: 1=enabled
+	 * 05      Reserved, must be 0
+	 * 04      TME, Timer Enable
+	 * 03..00  Reserved, must be 0
+	 *
+	 * 0101 0000
+	 */
+	write_reg(info, (unsigned char)(timer + TMCS), 0x50);
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	timeout=100;
+	while( timeout-- && !info->irq_occurred ) {
+		msleep_interruptible(10);
+	}
+
+	spin_lock_irqsave(&info->lock,flags);
+	reset_port(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return info->irq_occurred;
+}
+
+/* initialize individual SCA device (2 ports)
+ */
+static bool sca_init(SLMP_INFO *info)
+{
+	/* set wait controller to single mem partition (low), no wait states */
+	write_reg(info, PABR0, 0);	/* wait controller addr boundary 0 */
+	write_reg(info, PABR1, 0);	/* wait controller addr boundary 1 */
+	write_reg(info, WCRL, 0);	/* wait controller low range */
+	write_reg(info, WCRM, 0);	/* wait controller mid range */
+	write_reg(info, WCRH, 0);	/* wait controller high range */
+
+	/* DPCR, DMA Priority Control
+	 *
+	 * 07..05  Not used, must be 0
+	 * 04      BRC, bus release condition: 0=all transfers complete
+	 * 03      CCC, channel change condition: 0=every cycle
+	 * 02..00  PR<2..0>, priority 100=round robin
+	 *
+	 * 00000100 = 0x04
+	 */
+	write_reg(info, DPCR, dma_priority);
+
+	/* DMA Master Enable, BIT7: 1=enable all channels */
+	write_reg(info, DMER, 0x80);
+
+	/* enable all interrupt classes */
+	write_reg(info, IER0, 0xff);	/* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
+	write_reg(info, IER1, 0xff);	/* DMIB,DMIA (channels 0-3) */
+	write_reg(info, IER2, 0xf0);	/* TIRQ (timers 0-3) */
+
+	/* ITCR, interrupt control register
+	 * 07      IPC, interrupt priority, 0=MSCI->DMA
+	 * 06..05  IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
+	 * 04      VOS, Vector Output, 0=unmodified vector
+	 * 03..00  Reserved, must be 0
+	 */
+	write_reg(info, ITCR, 0);
+
+	return true;
+}
+
+/* initialize adapter hardware
+ */
+static bool init_adapter(SLMP_INFO *info)
+{
+	int i;
+
+	/* Set BIT30 of Local Control Reg 0x50 to reset SCA */
+	volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
+	u32 readval;
+
+	info->misc_ctrl_value |= BIT30;
+	*MiscCtrl = info->misc_ctrl_value;
+
+	/*
+	 * Force at least 170ns delay before clearing
+	 * reset bit. Each read from LCR takes at least
+	 * 30ns so 10 times for 300ns to be safe.
+	 */
+	for(i=0;i<10;i++)
+		readval = *MiscCtrl;
+
+	info->misc_ctrl_value &= ~BIT30;
+	*MiscCtrl = info->misc_ctrl_value;
+
+	/* init control reg (all DTRs off, all clksel=input) */
+	info->ctrlreg_value = 0xaa;
+	write_control_reg(info);
+
+	{
+		volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
+		lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
+
+		switch(read_ahead_count)
+		{
+		case 16:
+			lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
+			break;
+		case 8:
+			lcr1_brdr_value |= BIT5 + BIT4;
+			break;
+		case 4:
+			lcr1_brdr_value |= BIT5 + BIT3;
+			break;
+		case 0:
+			lcr1_brdr_value |= BIT5;
+			break;
+		}
+
+		*LCR1BRDR = lcr1_brdr_value;
+		*MiscCtrl = misc_ctrl_value;
+	}
+
+	sca_init(info->port_array[0]);
+	sca_init(info->port_array[2]);
+
+	return true;
+}
+
+/* Loopback an HDLC frame to test the hardware
+ * interrupt and DMA functions.
+ */
+static bool loopback_test(SLMP_INFO *info)
+{
+#define TESTFRAMESIZE 20
+
+	unsigned long timeout;
+	u16 count = TESTFRAMESIZE;
+	unsigned char buf[TESTFRAMESIZE];
+	bool rc = false;
+	unsigned long flags;
+
+	struct tty_struct *oldtty = info->port.tty;
+	u32 speed = info->params.clock_speed;
+
+	info->params.clock_speed = 3686400;
+	info->port.tty = NULL;
+
+	/* assume failure */
+	info->init_error = DiagStatus_DmaFailure;
+
+	/* build and send transmit frame */
+	for (count = 0; count < TESTFRAMESIZE;++count)
+		buf[count] = (unsigned char)count;
+
+	memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
+
+	/* program hardware for HDLC and enabled receiver */
+	spin_lock_irqsave(&info->lock,flags);
+	hdlc_mode(info);
+	enable_loopback(info,1);
+       	rx_start(info);
+	info->tx_count = count;
+	tx_load_dma_buffer(info,buf,count);
+	tx_start(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	/* wait for receive complete */
+	/* Set a timeout for waiting for interrupt. */
+	for ( timeout = 100; timeout; --timeout ) {
+		msleep_interruptible(10);
+
+		if (rx_get_frame(info)) {
+			rc = true;
+			break;
+		}
+	}
+
+	/* verify received frame length and contents */
+	if (rc &&
+	    ( info->tmp_rx_buf_count != count ||
+	      memcmp(buf, info->tmp_rx_buf,count))) {
+		rc = false;
+	}
+
+	spin_lock_irqsave(&info->lock,flags);
+	reset_adapter(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	info->params.clock_speed = speed;
+	info->port.tty = oldtty;
+
+	return rc;
+}
+
+/* Perform diagnostics on hardware
+ */
+static int adapter_test( SLMP_INFO *info )
+{
+	unsigned long flags;
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):Testing device %s\n",
+			__FILE__,__LINE__,info->device_name );
+
+	spin_lock_irqsave(&info->lock,flags);
+	init_adapter(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	info->port_array[0]->port_count = 0;
+
+	if ( register_test(info->port_array[0]) &&
+		register_test(info->port_array[1])) {
+
+		info->port_array[0]->port_count = 2;
+
+		if ( register_test(info->port_array[2]) &&
+			register_test(info->port_array[3]) )
+			info->port_array[0]->port_count += 2;
+	}
+	else {
+		printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
+			__FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
+		return -ENODEV;
+	}
+
+	if ( !irq_test(info->port_array[0]) ||
+		!irq_test(info->port_array[1]) ||
+		 (info->port_count == 4 && !irq_test(info->port_array[2])) ||
+		 (info->port_count == 4 && !irq_test(info->port_array[3]))) {
+		printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
+			__FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
+		return -ENODEV;
+	}
+
+	if (!loopback_test(info->port_array[0]) ||
+		!loopback_test(info->port_array[1]) ||
+		 (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
+		 (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
+		printk( "%s(%d):DMA test failure for device %s\n",
+			__FILE__,__LINE__,info->device_name);
+		return -ENODEV;
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):device %s passed diagnostics\n",
+			__FILE__,__LINE__,info->device_name );
+
+	info->port_array[0]->init_error = 0;
+	info->port_array[1]->init_error = 0;
+	if ( info->port_count > 2 ) {
+		info->port_array[2]->init_error = 0;
+		info->port_array[3]->init_error = 0;
+	}
+
+	return 0;
+}
+
+/* Test the shared memory on a PCI adapter.
+ */
+static bool memory_test(SLMP_INFO *info)
+{
+	static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
+		0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
+	unsigned long count = ARRAY_SIZE(testval);
+	unsigned long i;
+	unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
+	unsigned long * addr = (unsigned long *)info->memory_base;
+
+	/* Test data lines with test pattern at one location. */
+
+	for ( i = 0 ; i < count ; i++ ) {
+		*addr = testval[i];
+		if ( *addr != testval[i] )
+			return false;
+	}
+
+	/* Test address lines with incrementing pattern over */
+	/* entire address range. */
+
+	for ( i = 0 ; i < limit ; i++ ) {
+		*addr = i * 4;
+		addr++;
+	}
+
+	addr = (unsigned long *)info->memory_base;
+
+	for ( i = 0 ; i < limit ; i++ ) {
+		if ( *addr != i * 4 )
+			return false;
+		addr++;
+	}
+
+	memset( info->memory_base, 0, SCA_MEM_SIZE );
+	return true;
+}
+
+/* Load data into PCI adapter shared memory.
+ *
+ * The PCI9050 releases control of the local bus
+ * after completing the current read or write operation.
+ *
+ * While the PCI9050 write FIFO not empty, the
+ * PCI9050 treats all of the writes as a single transaction
+ * and does not release the bus. This causes DMA latency problems
+ * at high speeds when copying large data blocks to the shared memory.
+ *
+ * This function breaks a write into multiple transations by
+ * interleaving a read which flushes the write FIFO and 'completes'
+ * the write transation. This allows any pending DMA request to gain control
+ * of the local bus in a timely fasion.
+ */
+static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
+{
+	/* A load interval of 16 allows for 4 32-bit writes at */
+	/* 136ns each for a maximum latency of 542ns on the local bus.*/
+
+	unsigned short interval = count / sca_pci_load_interval;
+	unsigned short i;
+
+	for ( i = 0 ; i < interval ; i++ )
+	{
+		memcpy(dest, src, sca_pci_load_interval);
+		read_status_reg(info);
+		dest += sca_pci_load_interval;
+		src += sca_pci_load_interval;
+	}
+
+	memcpy(dest, src, count % sca_pci_load_interval);
+}
+
+static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
+{
+	int i;
+	int linecount;
+	if (xmit)
+		printk("%s tx data:\n",info->device_name);
+	else
+		printk("%s rx data:\n",info->device_name);
+
+	while(count) {
+		if (count > 16)
+			linecount = 16;
+		else
+			linecount = count;
+
+		for(i=0;i<linecount;i++)
+			printk("%02X ",(unsigned char)data[i]);
+		for(;i<17;i++)
+			printk("   ");
+		for(i=0;i<linecount;i++) {
+			if (data[i]>=040 && data[i]<=0176)
+				printk("%c",data[i]);
+			else
+				printk(".");
+		}
+		printk("\n");
+
+		data  += linecount;
+		count -= linecount;
+	}
+}	/* end of trace_block() */
+
+/* called when HDLC frame times out
+ * update stats and do tx completion processing
+ */
+static void tx_timeout(unsigned long context)
+{
+	SLMP_INFO *info = (SLMP_INFO*)context;
+	unsigned long flags;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):%s tx_timeout()\n",
+			__FILE__,__LINE__,info->device_name);
+	if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
+		info->icount.txtimeout++;
+	}
+	spin_lock_irqsave(&info->lock,flags);
+	info->tx_active = false;
+	info->tx_count = info->tx_put = info->tx_get = 0;
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+#if SYNCLINK_GENERIC_HDLC
+	if (info->netcount)
+		hdlcdev_tx_done(info);
+	else
+#endif
+		bh_transmit(info);
+}
+
+/* called to periodically check the DSR/RI modem signal input status
+ */
+static void status_timeout(unsigned long context)
+{
+	u16 status = 0;
+	SLMP_INFO *info = (SLMP_INFO*)context;
+	unsigned long flags;
+	unsigned char delta;
+
+
+	spin_lock_irqsave(&info->lock,flags);
+	get_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	/* check for DSR/RI state change */
+
+	delta = info->old_signals ^ info->serial_signals;
+	info->old_signals = info->serial_signals;
+
+	if (delta & SerialSignal_DSR)
+		status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
+
+	if (delta & SerialSignal_RI)
+		status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
+
+	if (delta & SerialSignal_DCD)
+		status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
+
+	if (delta & SerialSignal_CTS)
+		status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
+
+	if (status)
+		isr_io_pin(info,status);
+
+	mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
+}
+
+
+/* Register Access Routines -
+ * All registers are memory mapped
+ */
+#define CALC_REGADDR() \
+	unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
+	if (info->port_num > 1) \
+		RegAddr += 256;	    		/* port 0-1 SCA0, 2-3 SCA1 */ \
+	if ( info->port_num & 1) { \
+		if (Addr > 0x7f) \
+			RegAddr += 0x40;	/* DMA access */ \
+		else if (Addr > 0x1f && Addr < 0x60) \
+			RegAddr += 0x20;	/* MSCI access */ \
+	}
+
+
+static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
+{
+	CALC_REGADDR();
+	return *RegAddr;
+}
+static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
+{
+	CALC_REGADDR();
+	*RegAddr = Value;
+}
+
+static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
+{
+	CALC_REGADDR();
+	return *((u16 *)RegAddr);
+}
+
+static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
+{
+	CALC_REGADDR();
+	*((u16 *)RegAddr) = Value;
+}
+
+static unsigned char read_status_reg(SLMP_INFO * info)
+{
+	unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
+	return *RegAddr;
+}
+
+static void write_control_reg(SLMP_INFO * info)
+{
+	unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
+	*RegAddr = info->port_array[0]->ctrlreg_value;
+}
+
+
+static int __devinit synclinkmp_init_one (struct pci_dev *dev,
+					  const struct pci_device_id *ent)
+{
+	if (pci_enable_device(dev)) {
+		printk("error enabling pci device %p\n", dev);
+		return -EIO;
+	}
+	device_init( ++synclinkmp_adapter_count, dev );
+	return 0;
+}
+
+static void __devexit synclinkmp_remove_one (struct pci_dev *dev)
+{
+}
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 8e0dd254eb11..81f13958e751 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -571,6 +571,7 @@ struct sysrq_state {
 	unsigned int alt_use;
 	bool active;
 	bool need_reinject;
+	bool reinjecting;
 };
 
 static void sysrq_reinject_alt_sysrq(struct work_struct *work)
@@ -581,6 +582,10 @@ static void sysrq_reinject_alt_sysrq(struct work_struct *work)
 	unsigned int alt_code = sysrq->alt_use;
 
 	if (sysrq->need_reinject) {
+		/* we do not want the assignment to be reordered */
+		sysrq->reinjecting = true;
+		mb();
+
 		/* Simulate press and release of Alt + SysRq */
 		input_inject_event(handle, EV_KEY, alt_code, 1);
 		input_inject_event(handle, EV_KEY, KEY_SYSRQ, 1);
@@ -589,6 +594,9 @@ static void sysrq_reinject_alt_sysrq(struct work_struct *work)
 		input_inject_event(handle, EV_KEY, KEY_SYSRQ, 0);
 		input_inject_event(handle, EV_KEY, alt_code, 0);
 		input_inject_event(handle, EV_SYN, SYN_REPORT, 1);
+
+		mb();
+		sysrq->reinjecting = false;
 	}
 }
 
@@ -599,6 +607,13 @@ static bool sysrq_filter(struct input_handle *handle,
 	bool was_active = sysrq->active;
 	bool suppress;
 
+	/*
+	 * Do not filter anything if we are in the process of re-injecting
+	 * Alt+SysRq combination.
+	 */
+	if (sysrq->reinjecting)
+		return false;
+
 	switch (type) {
 
 	case EV_SYN:
@@ -629,7 +644,7 @@ static bool sysrq_filter(struct input_handle *handle,
 				sysrq->alt_use = sysrq->alt;
 				/*
 				 * If nothing else will be pressed we'll need
-				 * to * re-inject Alt-SysRq keysroke.
+				 * to re-inject Alt-SysRq keysroke.
 				 */
 				sysrq->need_reinject = true;
 			}
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index f64582b0f623..7c5866920622 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -95,8 +95,10 @@ static void tty_audit_buf_push(struct task_struct *tsk, uid_t loginuid,
 {
 	if (buf->valid == 0)
 		return;
-	if (audit_enabled == 0)
+	if (audit_enabled == 0) {
+		buf->valid = 0;
 		return;
+	}
 	tty_audit_log("tty", tsk, loginuid, sessionid, buf->major, buf->minor,
 		      buf->data, buf->valid);
 	buf->valid = 0;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 0065da4b11c1..936a4ead6c21 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -90,7 +90,6 @@
 #include <linux/proc_fs.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/wait.h>
 #include <linux/bitops.h>
@@ -2465,12 +2464,12 @@ out:
  *	Locking: none (up to the driver)
  */
 
-static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p)
+static int tty_tiocmget(struct tty_struct *tty, int __user *p)
 {
 	int retval = -EINVAL;
 
 	if (tty->ops->tiocmget) {
-		retval = tty->ops->tiocmget(tty, file);
+		retval = tty->ops->tiocmget(tty);
 
 		if (retval >= 0)
 			retval = put_user(retval, p);
@@ -2481,7 +2480,6 @@ static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p
 /**
  *	tty_tiocmset		-	set modem status
  *	@tty: tty device
- *	@file: user file pointer
  *	@cmd: command - clear bits, set bits or set all
  *	@p: pointer to desired bits
  *
@@ -2491,7 +2489,7 @@ static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p
  *	Locking: none (up to the driver)
  */
 
-static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd,
+static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd,
 	     unsigned __user *p)
 {
 	int retval;
@@ -2518,7 +2516,7 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
 	}
 	set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
 	clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
-	return tty->ops->tiocmset(tty, file, set, clear);
+	return tty->ops->tiocmset(tty, set, clear);
 }
 
 static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
@@ -2627,6 +2625,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		return put_user(tty->ldisc->ops->num, (int __user *)p);
 	case TIOCSETD:
 		return tiocsetd(tty, p);
+	case TIOCVHANGUP:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		tty_vhangup(tty);
+		return 0;
 	case TIOCGDEV:
 	{
 		unsigned int ret = new_encode_dev(tty_devnum(real_tty));
@@ -2655,11 +2658,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		return send_break(tty, arg ? arg*100 : 250);
 
 	case TIOCMGET:
-		return tty_tiocmget(tty, file, p);
+		return tty_tiocmget(tty, p);
 	case TIOCMSET:
 	case TIOCMBIC:
 	case TIOCMBIS:
-		return tty_tiocmset(tty, file, cmd, p);
+		return tty_tiocmset(tty, cmd, p);
 	case TIOCGICOUNT:
 		retval = tty_tiocgicount(tty, p);
 		/* For the moment allow fall through to the old method */
@@ -2677,7 +2680,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		break;
 	}
 	if (tty->ops->ioctl) {
-		retval = (tty->ops->ioctl)(tty, file, cmd, arg);
+		retval = (tty->ops->ioctl)(tty, cmd, arg);
 		if (retval != -ENOIOCTLCMD)
 			return retval;
 	}
@@ -2705,7 +2708,7 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd,
 		return -EINVAL;
 
 	if (tty->ops->compat_ioctl) {
-		retval = (tty->ops->compat_ioctl)(tty, file, cmd, arg);
+		retval = (tty->ops->compat_ioctl)(tty, cmd, arg);
 		if (retval != -ENOIOCTLCMD)
 			return retval;
 	}
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 0c1889971459..1a1135d580a2 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -486,7 +486,7 @@ int tty_termios_hw_change(struct ktermios *a, struct ktermios *b)
 EXPORT_SYMBOL(tty_termios_hw_change);
 
 /**
- *	change_termios		-	update termios values
+ *	tty_set_termios		-	update termios values
  *	@tty: tty to update
  *	@new_termios: desired new value
  *
@@ -497,7 +497,7 @@ EXPORT_SYMBOL(tty_termios_hw_change);
  *	Locking: termios_mutex
  */
 
-static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
+int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
 {
 	struct ktermios old_termios;
 	struct tty_ldisc *ld;
@@ -553,7 +553,9 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
 		tty_ldisc_deref(ld);
 	}
 	mutex_unlock(&tty->termios_mutex);
+	return 0;
 }
+EXPORT_SYMBOL_GPL(tty_set_termios);
 
 /**
  *	set_termios		-	set termios values for a tty
@@ -562,7 +564,7 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
  *	@opt: option information
  *
  *	Helper function to prepare termios data and run necessary other
- *	functions before using change_termios to do the actual changes.
+ *	functions before using tty_set_termios to do the actual changes.
  *
  *	Locking:
  *		Called functions take ldisc and termios_mutex locks
@@ -620,7 +622,7 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
 			return -EINTR;
 	}
 
-	change_termios(tty, &tmp_termios);
+	tty_set_termios(tty, &tmp_termios);
 
 	/* FIXME: Arguably if tmp_termios == tty->termios AND the
 	   actual requested termios was not tmp_termios then we may
@@ -797,7 +799,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
 						termios.c_ospeed);
 #endif
 	mutex_unlock(&tty->termios_mutex);
-	change_termios(tty, &termios);
+	tty_set_termios(tty, &termios);
 	return 0;
 }
 #endif
@@ -951,6 +953,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 	int ret = 0;
 	struct ktermios kterm;
 
+	BUG_ON(file == NULL);
+
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 	    tty->driver->subtype == PTY_TYPE_MASTER)
 		real_tty = tty->link;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 4214d58276f7..0fc564a97706 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -34,8 +34,6 @@
 #include <linux/vt_kern.h>
 #include <linux/selection.h>
 
-#include <linux/smp_lock.h>	/* For the moment */
-
 #include <linux/kmod.h>
 #include <linux/nsproxy.h>
 
@@ -535,6 +533,19 @@ static int tty_ldisc_halt(struct tty_struct *tty)
 }
 
 /**
+ *	tty_ldisc_flush_works	-	flush all works of a tty
+ *	@tty: tty device to flush works for
+ *
+ *	Sync flush all works belonging to @tty.
+ */
+static void tty_ldisc_flush_works(struct tty_struct *tty)
+{
+	flush_work_sync(&tty->hangup_work);
+	flush_work_sync(&tty->SAK_work);
+	flush_delayed_work_sync(&tty->buf.work);
+}
+
+/**
  *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
  *	@tty: tty to wait for
  *
@@ -653,7 +664,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	mutex_unlock(&tty->ldisc_mutex);
 
-	flush_scheduled_work();
+	tty_ldisc_flush_works(tty);
 
 	retval = tty_ldisc_wait_idle(tty);
 
@@ -905,7 +916,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 
 	tty_unlock();
 	tty_ldisc_halt(tty);
-	flush_scheduled_work();
+	tty_ldisc_flush_works(tty);
 	tty_lock();
 
 	mutex_lock(&tty->ldisc_mutex);
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index e95d7876ca6b..6dd3c68c13ad 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -654,7 +654,8 @@ static void k_spec(struct vc_data *vc, unsigned char value, char up_flag)
 	if (value >= ARRAY_SIZE(fn_handler))
 		return;
 	if ((kbd->kbdmode == VC_RAW ||
-	     kbd->kbdmode == VC_MEDIUMRAW) &&
+	     kbd->kbdmode == VC_MEDIUMRAW ||
+	     kbd->kbdmode == VC_OFF) &&
 	     value != KVAL(K_SAK))
 		return;		/* SAK is allowed even in raw mode */
 	fn_handler[value](vc);
@@ -1295,7 +1296,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 	if (rc == NOTIFY_STOP)
 		return;
 
-	if (raw_mode && type != KT_SPEC && type != KT_SHIFT)
+	if ((raw_mode || kbd->kbdmode == VC_OFF) && type != KT_SPEC && type != KT_SHIFT)
 		return;
 
 	(*k_handler[type])(vc, keysym & 0xff, !down);
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index c956ed6c83a3..adf0ad2a8851 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -26,7 +26,6 @@
 #include <linux/selection.h>
 #include <linux/tiocl.h>
 #include <linux/console.h>
-#include <linux/smp_lock.h>
 
 /* Don't take this from <ctype.h>: 011-015 on the screen aren't spaces */
 #define isspace(c)	((c) == ' ')
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index a672ed192d33..1564261e80c8 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -28,13 +28,11 @@
 #include <linux/interrupt.h>
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/mutex.h>
 #include <linux/vt_kern.h>
 #include <linux/selection.h>
 #include <linux/kbd_kern.h>
 #include <linux/console.h>
 #include <linux/device.h>
-#include <linux/smp_lock.h>
 #include <linux/sched.h>
 #include <linux/fs.h>
 #include <linux/poll.h>
@@ -51,6 +49,8 @@
 #undef addr
 #define HEADER_SIZE	4
 
+#define CON_BUF_SIZE (CONFIG_BASE_SMALL ? 256 : PAGE_SIZE)
+
 struct vcs_poll_data {
 	struct notifier_block notifier;
 	unsigned int cons_num;
@@ -131,21 +131,45 @@ vcs_poll_data_get(struct file *file)
 	return poll;
 }
 
+/*
+ * Returns VC for inode.
+ * Must be called with console_lock.
+ */
+static struct vc_data*
+vcs_vc(struct inode *inode, int *viewed)
+{
+	unsigned int currcons = iminor(inode) & 127;
+
+	WARN_CONSOLE_UNLOCKED();
+
+	if (currcons == 0) {
+		currcons = fg_console;
+		if (viewed)
+			*viewed = 1;
+	} else {
+		currcons--;
+		if (viewed)
+			*viewed = 0;
+	}
+	return vc_cons[currcons].d;
+}
+
+/*
+ * Returns size for VC carried by inode.
+ * Must be called with console_lock.
+ */
 static int
 vcs_size(struct inode *inode)
 {
 	int size;
 	int minor = iminor(inode);
-	int currcons = minor & 127;
 	struct vc_data *vc;
 
-	if (currcons == 0)
-		currcons = fg_console;
-	else
-		currcons--;
-	if (!vc_cons_allocated(currcons))
+	WARN_CONSOLE_UNLOCKED();
+
+	vc = vcs_vc(inode, NULL);
+	if (!vc)
 		return -ENXIO;
-	vc = vc_cons[currcons].d;
 
 	size = vc->vc_rows * vc->vc_cols;
 
@@ -158,11 +182,13 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig)
 {
 	int size;
 
-	mutex_lock(&con_buf_mtx);
+	console_lock();
 	size = vcs_size(file->f_path.dentry->d_inode);
+	console_unlock();
+	if (size < 0)
+		return size;
 	switch (orig) {
 		default:
-			mutex_unlock(&con_buf_mtx);
 			return -EINVAL;
 		case 2:
 			offset += size;
@@ -173,11 +199,9 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig)
 			break;
 	}
 	if (offset < 0 || offset > size) {
-		mutex_unlock(&con_buf_mtx);
 		return -EINVAL;
 	}
 	file->f_pos = offset;
-	mutex_unlock(&con_buf_mtx);
 	return file->f_pos;
 }
 
@@ -190,12 +214,15 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	struct vc_data *vc;
 	struct vcs_poll_data *poll;
 	long pos;
-	long viewed, attr, read;
-	int col, maxcol;
+	long attr, read;
+	int col, maxcol, viewed;
 	unsigned short *org = NULL;
 	ssize_t ret;
+	char *con_buf;
 
-	mutex_lock(&con_buf_mtx);
+	con_buf = (char *) __get_free_page(GFP_KERNEL);
+	if (!con_buf)
+		return -ENOMEM;
 
 	pos = *ppos;
 
@@ -205,18 +232,10 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	console_lock();
 
 	attr = (currcons & 128);
-	currcons = (currcons & 127);
-	if (currcons == 0) {
-		currcons = fg_console;
-		viewed = 1;
-	} else {
-		currcons--;
-		viewed = 0;
-	}
 	ret = -ENXIO;
-	if (!vc_cons_allocated(currcons))
+	vc = vcs_vc(inode, &viewed);
+	if (!vc)
 		goto unlock_out;
-	vc = vc_cons[currcons].d;
 
 	ret = -EINVAL;
 	if (pos < 0)
@@ -237,6 +256,12 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 		 * could sleep.
 		 */
 		size = vcs_size(inode);
+		if (size < 0) {
+			if (read)
+				break;
+			ret = size;
+			goto unlock_out;
+		}
 		if (pos >= size)
 			break;
 		if (count > size - pos)
@@ -355,7 +380,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 		ret = read;
 unlock_out:
 	console_unlock();
-	mutex_unlock(&con_buf_mtx);
+	free_page((unsigned long) con_buf);
 	return ret;
 }
 
@@ -366,13 +391,16 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	unsigned int currcons = iminor(inode);
 	struct vc_data *vc;
 	long pos;
-	long viewed, attr, size, written;
+	long attr, size, written;
 	char *con_buf0;
-	int col, maxcol;
+	int col, maxcol, viewed;
 	u16 *org0 = NULL, *org = NULL;
 	size_t ret;
+	char *con_buf;
 
-	mutex_lock(&con_buf_mtx);
+	con_buf = (char *) __get_free_page(GFP_KERNEL);
+	if (!con_buf)
+		return -ENOMEM;
 
 	pos = *ppos;
 
@@ -382,19 +410,10 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	console_lock();
 
 	attr = (currcons & 128);
-	currcons = (currcons & 127);
-
-	if (currcons == 0) {
-		currcons = fg_console;
-		viewed = 1;
-	} else {
-		currcons--;
-		viewed = 0;
-	}
 	ret = -ENXIO;
-	if (!vc_cons_allocated(currcons))
+	vc = vcs_vc(inode, &viewed);
+	if (!vc)
 		goto unlock_out;
-	vc = vc_cons[currcons].d;
 
 	size = vcs_size(inode);
 	ret = -EINVAL;
@@ -436,6 +455,12 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 		 * Return data written up to now on failure.
 		 */
 		size = vcs_size(inode);
+		if (size < 0) {
+			if (written)
+				break;
+			ret = size;
+			goto unlock_out;
+		}
 		if (pos >= size)
 			break;
 		if (this_round > size - pos)
@@ -543,9 +568,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 
 unlock_out:
 	console_unlock();
-
-	mutex_unlock(&con_buf_mtx);
-
+	free_page((unsigned long) con_buf);
 	return ret;
 }
 
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 147ede3423df..c83cdfb56fcc 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -89,7 +89,6 @@
 #include <linux/mutex.h>
 #include <linux/vt_kern.h>
 #include <linux/selection.h>
-#include <linux/smp_lock.h>
 #include <linux/tiocl.h>
 #include <linux/kbd_kern.h>
 #include <linux/consolemap.h>
@@ -2068,18 +2067,6 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
 	}
 }
 
-/* This is a temporary buffer used to prepare a tty console write
- * so that we can easily avoid touching user space while holding the
- * console spinlock.  It is allocated in con_init and is shared by
- * this code and the vc_screen read/write tty calls.
- *
- * We have to allocate this statically in the kernel data section
- * since console_init (and thus con_init) are called before any
- * kernel memory allocation is available.
- */
-char con_buf[CON_BUF_SIZE];
-DEFINE_MUTEX(con_buf_mtx);
-
 /* is_double_width() is based on the wcwidth() implementation by
  * Markus Kuhn -- 2007-05-26 (Unicode 5.0)
  * Latest version: http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c
@@ -2157,10 +2144,10 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
 
 	currcons = vc->vc_num;
 	if (!vc_cons_allocated(currcons)) {
-	    /* could this happen? */
-		printk_once("con_write: tty %d not allocated\n", currcons+1);
-	    console_unlock();
-	    return 0;
+		/* could this happen? */
+		pr_warn_once("con_write: tty %d not allocated\n", currcons+1);
+		console_unlock();
+		return 0;
 	}
 
 	himask = vc->vc_hi_font_mask;
@@ -2940,7 +2927,7 @@ static int __init con_init(void)
 	gotoxy(vc, vc->vc_x, vc->vc_y);
 	csi_J(vc, 0);
 	update_screen(vc);
-	printk("Console: %s %s %dx%d",
+	pr_info("Console: %s %s %dx%d",
 		vc->vc_can_do_color ? "colour" : "mono",
 		display_desc, vc->vc_cols, vc->vc_rows);
 	printable = 1;
@@ -3103,7 +3090,7 @@ static int bind_con_driver(const struct consw *csw, int first, int last,
 			clear_buffer_attributes(vc);
 	}
 
-	printk("Console: switching ");
+	pr_info("Console: switching ");
 	if (!deflt)
 		printk("consoles %d-%d ", first+1, last+1);
 	if (j >= 0) {
@@ -3809,7 +3796,8 @@ void do_unblank_screen(int leaving_gfx)
 		return;
 	if (!vc_cons_allocated(fg_console)) {
 		/* impossible */
-		printk("unblank_screen: tty %d not allocated ??\n", fg_console+1);
+		pr_warning("unblank_screen: tty %d not allocated ??\n",
+			   fg_console+1);
 		return;
 	}
 	vc = vc_cons[fg_console].d;
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 1235ebda6e1c..937d17219984 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -27,7 +27,6 @@
 #include <linux/console.h>
 #include <linux/consolemap.h>
 #include <linux/signal.h>
-#include <linux/smp_lock.h>
 #include <linux/timex.h>
 
 #include <asm/io.h>
@@ -495,7 +494,7 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_
  * We handle the console-specific ioctl's here.  We allow the
  * capability to modify any console, not just the fg_console. 
  */
-int vt_ioctl(struct tty_struct *tty, struct file * file,
+int vt_ioctl(struct tty_struct *tty,
 	     unsigned int cmd, unsigned long arg)
 {
 	struct vc_data *vc = tty->driver_data;
@@ -688,6 +687,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 			kbd->kbdmode = VC_UNICODE;
 			compute_shiftstate();
 			break;
+		  case K_OFF:
+			kbd->kbdmode = VC_OFF;
+			break;
 		  default:
 			ret = -EINVAL;
 			goto out;
@@ -1007,8 +1009,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 			if (ret)
 				break;
 			/* Commence switch and lock */
-			set_console(arg);
+			set_console(vsa.console);
 		}
+		break;
 	}
 
 	/*
@@ -1491,7 +1494,7 @@ compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud,
 	return 0;
 }
 
-long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
+long vt_compat_ioctl(struct tty_struct *tty,
 	     unsigned int cmd, unsigned long arg)
 {
 	struct vc_data *vc = tty->driver_data;
@@ -1577,7 +1580,7 @@ out:
 
 fallback:
 	tty_unlock();
-	return vt_ioctl(tty, file, cmd, arg);
+	return vt_ioctl(tty, cmd, arg);
 }