summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea/usbmisc_imx.c
diff options
context:
space:
mode:
authorPeter Chen <peter.chen@nxp.com>2018-10-16 09:17:02 +0800
committerPeter Chen <peter.chen@nxp.com>2018-12-11 09:12:30 +0800
commit7c8e8909417eb6342ac487dc5ab3076d46718f71 (patch)
tree2368c0024f335e03ce1e29b0e9b12815c98273b2 /drivers/usb/chipidea/usbmisc_imx.c
parent014abe34a9095daaa6cbb2693ee90bbb54674693 (diff)
downloadlinux-7c8e8909417eb6342ac487dc5ab3076d46718f71.tar.gz
linux-7c8e8909417eb6342ac487dc5ab3076d46718f71.tar.bz2
linux-7c8e8909417eb6342ac487dc5ab3076d46718f71.zip
usb: chipidea: imx: add HSIC support
To support imx HSIC, there are some special requirement: - The HSIC pad is 1.2v, it may need to supply from external - The data/strobe pin needs to be pulled down first, and after host mode is initialized, the strobe pin needs to be pulled up - During the USB suspend/resume, special setting is needed Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
Diffstat (limited to 'drivers/usb/chipidea/usbmisc_imx.c')
-rw-r--r--drivers/usb/chipidea/usbmisc_imx.c140
1 files changed, 140 insertions, 0 deletions
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index def80ff547e4..43a15a6e86f5 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -64,10 +64,22 @@
#define MX6_BM_OVER_CUR_DIS BIT(7)
#define MX6_BM_OVER_CUR_POLARITY BIT(8)
#define MX6_BM_WAKEUP_ENABLE BIT(10)
+#define MX6_BM_UTMI_ON_CLOCK BIT(13)
#define MX6_BM_ID_WAKEUP BIT(16)
#define MX6_BM_VBUS_WAKEUP BIT(17)
#define MX6SX_BM_DPDM_WAKEUP_EN BIT(29)
#define MX6_BM_WAKEUP_INTR BIT(31)
+
+#define MX6_USB_HSIC_CTRL_OFFSET 0x10
+/* Send resume signal without 480Mhz PHY clock */
+#define MX6SX_BM_HSIC_AUTO_RESUME BIT(23)
+/* set before portsc.suspendM = 1 */
+#define MX6_BM_HSIC_DEV_CONN BIT(21)
+/* HSIC enable */
+#define MX6_BM_HSIC_EN BIT(12)
+/* Force HSIC module 480M clock on, even when in Host is in suspend mode */
+#define MX6_BM_HSIC_CLK_ON BIT(11)
+
#define MX6_USB_OTG1_PHY_CTRL 0x18
/* For imx6dql, it is host-only controller, for later imx6, it is otg's */
#define MX6_USB_OTG2_PHY_CTRL 0x1c
@@ -94,6 +106,10 @@ struct usbmisc_ops {
int (*post)(struct imx_usbmisc_data *data);
/* It's called when we need to enable/disable usb wakeup */
int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled);
+ /* It's called before setting portsc.suspendM */
+ int (*hsic_set_connect)(struct imx_usbmisc_data *data);
+ /* It's called during suspend/resume */
+ int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled);
};
struct imx_usbmisc {
@@ -353,6 +369,18 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
writel(reg | MX6_BM_NON_BURST_SETTING,
usbmisc->base + data->index * 4);
+ /* For HSIC controller */
+ if (data->hsic) {
+ reg = readl(usbmisc->base + data->index * 4);
+ writel(reg | MX6_BM_UTMI_ON_CLOCK,
+ usbmisc->base + data->index * 4);
+ reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
+ + (data->index - 2) * 4);
+ reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+ writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
+ + (data->index - 2) * 4);
+ }
+
spin_unlock_irqrestore(&usbmisc->lock, flags);
usbmisc_imx6q_set_wakeup(data, false);
@@ -360,6 +388,79 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
return 0;
}
+static int usbmisc_imx6_hsic_get_reg_offset(struct imx_usbmisc_data *data)
+{
+ int offset, ret = 0;
+
+ if (data->index == 2 || data->index == 3) {
+ offset = (data->index - 2) * 4;
+ } else if (data->index == 0) {
+ /*
+ * For SoCs like i.MX7D and later, each USB controller has
+ * its own non-core register region. For SoCs before i.MX7D,
+ * the first two USB controllers are non-HSIC controllers.
+ */
+ offset = 0;
+ } else {
+ dev_err(data->dev, "index is error for usbmisc\n");
+ ret = -EINVAL;
+ }
+
+ return ret ? ret : offset;
+}
+
+static int usbmisc_imx6_hsic_set_connect(struct imx_usbmisc_data *data)
+{
+ unsigned long flags;
+ u32 val;
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ int offset;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ offset = usbmisc_imx6_hsic_get_reg_offset(data);
+ if (offset < 0) {
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+ return offset;
+ }
+
+ val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+ if (!(val & MX6_BM_HSIC_DEV_CONN))
+ writel(val | MX6_BM_HSIC_DEV_CONN,
+ usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ return 0;
+}
+
+static int usbmisc_imx6_hsic_set_clk(struct imx_usbmisc_data *data, bool on)
+{
+ unsigned long flags;
+ u32 val;
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ int offset;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ offset = usbmisc_imx6_hsic_get_reg_offset(data);
+ if (offset < 0) {
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+ return offset;
+ }
+
+ val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+ val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+ if (on)
+ val |= MX6_BM_HSIC_CLK_ON;
+ else
+ val &= ~MX6_BM_HSIC_CLK_ON;
+
+ writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ return 0;
+}
+
+
static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
{
void __iomem *reg = NULL;
@@ -385,6 +486,13 @@ static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
spin_unlock_irqrestore(&usbmisc->lock, flags);
}
+ /* For HSIC controller */
+ if (data->hsic) {
+ val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+ val |= MX6SX_BM_HSIC_AUTO_RESUME;
+ writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+ }
+
return 0;
}
@@ -454,6 +562,7 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
usbmisc->base + MX7D_USBNC_USB_CTRL2);
+
spin_unlock_irqrestore(&usbmisc->lock, flags);
usbmisc_imx7d_set_wakeup(data, false);
@@ -481,6 +590,8 @@ static const struct usbmisc_ops imx53_usbmisc_ops = {
static const struct usbmisc_ops imx6q_usbmisc_ops = {
.set_wakeup = usbmisc_imx6q_set_wakeup,
.init = usbmisc_imx6q_init,
+ .hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+ .hsic_set_clk = usbmisc_imx6_hsic_set_clk,
};
static const struct usbmisc_ops vf610_usbmisc_ops = {
@@ -490,6 +601,8 @@ static const struct usbmisc_ops vf610_usbmisc_ops = {
static const struct usbmisc_ops imx6sx_usbmisc_ops = {
.set_wakeup = usbmisc_imx6q_set_wakeup,
.init = usbmisc_imx6sx_init,
+ .hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+ .hsic_set_clk = usbmisc_imx6_hsic_set_clk,
};
static const struct usbmisc_ops imx7d_usbmisc_ops = {
@@ -546,6 +659,33 @@ int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled)
}
EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup);
+int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc;
+
+ if (!data)
+ return 0;
+
+ usbmisc = dev_get_drvdata(data->dev);
+ if (!usbmisc->ops->hsic_set_connect || !data->hsic)
+ return 0;
+ return usbmisc->ops->hsic_set_connect(data);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_connect);
+
+int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on)
+{
+ struct imx_usbmisc *usbmisc;
+
+ if (!data)
+ return 0;
+
+ usbmisc = dev_get_drvdata(data->dev);
+ if (!usbmisc->ops->hsic_set_clk || !data->hsic)
+ return 0;
+ return usbmisc->ops->hsic_set_clk(data, on);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_clk);
static const struct of_device_id usbmisc_imx_dt_ids[] = {
{
.compatible = "fsl,imx25-usbmisc",