Merge 3.8-rc5 into staging-next

This resolves a merge issue with a iio driver, and the zram code.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 99 insertions, 24 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a815fd2cc5e7..957ed2c41482 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -877,6 +877,60 @@ static int hub_hub_status(struct usb_hub *hub,
 	return ret;
 }
 
+static int hub_set_port_link_state(struct usb_hub *hub, int port1,
+			unsigned int link_status)
+{
+	return set_port_feature(hub->hdev,
+			port1 | (link_status << 3),
+			USB_PORT_FEAT_LINK_STATE);
+}
+
+/*
+ * If USB 3.0 ports are placed into the Disabled state, they will no longer
+ * detect any device connects or disconnects.  This is generally not what the
+ * USB core wants, since it expects a disabled port to produce a port status
+ * change event when a new device connects.
+ *
+ * Instead, set the link state to Disabled, wait for the link to settle into
+ * that state, clear any change bits, and then put the port into the RxDetect
+ * state.
+ */
+static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
+{
+	int ret;
+	int total_time;
+	u16 portchange, portstatus;
+
+	if (!hub_is_superspeed(hub->hdev))
+		return -EINVAL;
+
+	ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
+	if (ret) {
+		dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
+				port1, ret);
+		return ret;
+	}
+
+	/* Wait for the link to enter the disabled state. */
+	for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
+		ret = hub_port_status(hub, port1, &portstatus, &portchange);
+		if (ret < 0)
+			return ret;
+
+		if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+				USB_SS_PORT_LS_SS_DISABLED)
+			break;
+		if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+			break;
+		msleep(HUB_DEBOUNCE_STEP);
+	}
+	if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+		dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n",
+				port1, total_time);
+
+	return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
+}
+
 static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 {
 	struct usb_device *hdev = hub->hdev;
@@ -885,8 +939,13 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 	if (hub->ports[port1 - 1]->child && set_state)
 		usb_set_device_state(hub->ports[port1 - 1]->child,
 				USB_STATE_NOTATTACHED);
-	if (!hub->error && !hub_is_superspeed(hub->hdev))
-		ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
+	if (!hub->error) {
+		if (hub_is_superspeed(hub->hdev))
+			ret = hub_usb3_port_disable(hub, port1);
+		else
+			ret = clear_port_feature(hdev, port1,
+					USB_PORT_FEAT_ENABLE);
+	}
 	if (ret)
 		dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
 				port1, ret);
@@ -2440,7 +2499,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
 #define HUB_SHORT_RESET_TIME	10
 #define HUB_BH_RESET_TIME	50
 #define HUB_LONG_RESET_TIME	200
-#define HUB_RESET_TIMEOUT	500
+#define HUB_RESET_TIMEOUT	800
 
 static int hub_port_reset(struct usb_hub *hub, int port1,
 			struct usb_device *udev, unsigned int delay, bool warm);
@@ -2475,6 +2534,10 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 		if (ret < 0)
 			return ret;
 
+		/* The port state is unknown until the reset completes. */
+		if ((portstatus & USB_PORT_STAT_RESET))
+			goto delay;
+
 		/*
 		 * Some buggy devices require a warm reset to be issued even
 		 * when the port appears not to be connected.
@@ -2520,11 +2583,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 			if ((portchange & USB_PORT_STAT_C_CONNECTION))
 				return -ENOTCONN;
 
-			/* if we`ve finished resetting, then break out of
-			 * the loop
-			 */
-			if (!(portstatus & USB_PORT_STAT_RESET) &&
-			    (portstatus & USB_PORT_STAT_ENABLE)) {
+			if ((portstatus & USB_PORT_STAT_ENABLE)) {
 				if (hub_is_wusb(hub))
 					udev->speed = USB_SPEED_WIRELESS;
 				else if (hub_is_superspeed(hub->hdev))
@@ -2538,10 +2597,15 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 				return 0;
 			}
 		} else {
-			if (portchange & USB_PORT_STAT_C_BH_RESET)
-				return 0;
+			if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+					hub_port_warm_reset_required(hub,
+						portstatus))
+				return -ENOTCONN;
+
+			return 0;
 		}
 
+delay:
 		/* switch to the long delay after two short delay failures */
 		if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
 			delay = HUB_LONG_RESET_TIME;
@@ -2565,14 +2629,11 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1,
 			msleep(10 + 40);
 			update_devnum(udev, 0);
 			hcd = bus_to_hcd(udev->bus);
-			if (hcd->driver->reset_device) {
-				*status = hcd->driver->reset_device(hcd, udev);
-				if (*status < 0) {
-					dev_err(&udev->dev, "Cannot reset "
-							"HCD device state\n");
-					break;
-				}
-			}
+			/* The xHC may think the device is already reset,
+			 * so ignore the status.
+			 */
+			if (hcd->driver->reset_device)
+				hcd->driver->reset_device(hcd, udev);
 		}
 		/* FALL THROUGH */
 	case -ENOTCONN:
@@ -2580,16 +2641,16 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1,
 		clear_port_feature(hub->hdev,
 				port1, USB_PORT_FEAT_C_RESET);
 		/* FIXME need disconnect() for NOTATTACHED device */
-		if (warm) {
+		if (hub_is_superspeed(hub->hdev)) {
 			clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_BH_PORT_RESET);
 			clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_PORT_LINK_STATE);
-		} else {
+		}
+		if (!warm)
 			usb_set_device_state(udev, *status
 					? USB_STATE_NOTATTACHED
 					: USB_STATE_DEFAULT);
-		}
 		break;
 	}
 }
@@ -2939,7 +3000,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 static int finish_port_resume(struct usb_device *udev)
 {
 	int	status = 0;
-	u16	devstatus;
+	u16	devstatus = 0;
 
 	/* caller owns the udev device lock */
 	dev_dbg(&udev->dev, "%s\n",
@@ -2984,7 +3045,13 @@ static int finish_port_resume(struct usb_device *udev)
 	if (status) {
 		dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
 				status);
-	} else if (udev->actconfig) {
+	/*
+	 * There are a few quirky devices which violate the standard
+	 * by claiming to have remote wakeup enabled after a reset,
+	 * which crash if the feature is cleared, hence check for
+	 * udev->reset_resume
+	 */
+	} else if (udev->actconfig && !udev->reset_resume) {
 		le16_to_cpus(&devstatus);
 		if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
 			status = usb_control_msg(udev,
@@ -4638,9 +4705,14 @@ static void hub_events(void)
 			 * SS.Inactive state.
 			 */
 			if (hub_port_warm_reset_required(hub, portstatus)) {
+				int status;
+
 				dev_dbg(hub_dev, "warm reset port %d\n", i);
-				hub_port_reset(hub, i, NULL,
+				status = hub_port_reset(hub, i, NULL,
 						HUB_BH_RESET_TIME, true);
+				if (status < 0)
+					hub_port_disable(hub, i, 1);
+				connect_change = 0;
 			}
 
 			if (connect_change)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index fdefd9c7f7af..3113c1d71442 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -43,6 +43,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Microsoft LifeCam-VX700 v2.0 */
+	{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Quickcam Fusion */
 	{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },