Merge tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg KH:
 "Here's the big USB pull request for 3.15-rc1.

  The normal set of patches, lots of controller driver updates, and a
  smattering of individual USB driver updates as well.

  All have been in linux-next for a while"

* tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits)
  xhci: Transition maintainership to Mathias Nyman.
  USB: disable reset-resume when USB_QUIRK_RESET is set
  USB: unbind all interfaces before rebinding any
  usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210
  usb: gadget: tcm_usb_gadget: stop format strings
  usb: gadget: f_fs: add missing spinlock and mutex unlock
  usb: gadget: composite: switch over to ERR_CAST()
  usb: gadget: inode: switch over to memdup_user()
  usb: gadget: f_subset: switch over to PTR_RET
  usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence
  USB: keyspan: remove dead debugging code
  USB: serial: add missing newlines to dev_<level> messages.
  USB: serial: add missing braces
  USB: serial: continue to write on errors
  USB: serial: continue to read on errors
  USB: serial: make bulk_out_size a lower limit
  USB: cypress_m8: fix potential scheduling while atomic
  devicetree: bindings: document lsi,zevio-usb
  usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs
  usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs
  ...

5 files changed, 455 insertions, 101 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a49217ae3533..d001417e8e37 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -61,9 +61,10 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
  * dwc3_core_soft_reset - Issues core soft reset and PHY reset
  * @dwc: pointer to our context structure
  */
-static void dwc3_core_soft_reset(struct dwc3 *dwc)
+static int dwc3_core_soft_reset(struct dwc3 *dwc)
 {
 	u32		reg;
+	int		ret;
 
 	/* Before Resetting PHY, put Core in Reset */
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
@@ -82,6 +83,15 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
 
 	usb_phy_init(dwc->usb2_phy);
 	usb_phy_init(dwc->usb3_phy);
+	ret = phy_init(dwc->usb2_generic_phy);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_init(dwc->usb3_generic_phy);
+	if (ret < 0) {
+		phy_exit(dwc->usb2_generic_phy);
+		return ret;
+	}
 	mdelay(100);
 
 	/* Clear USB3 PHY reset */
@@ -100,6 +110,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 	reg &= ~DWC3_GCTL_CORESOFTRESET;
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	return 0;
 }
 
 /**
@@ -242,6 +254,90 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
 	}
 }
 
+static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc)
+{
+	if (!dwc->has_hibernation)
+		return 0;
+
+	if (!dwc->nr_scratch)
+		return 0;
+
+	dwc->scratchbuf = kmalloc_array(dwc->nr_scratch,
+			DWC3_SCRATCHBUF_SIZE, GFP_KERNEL);
+	if (!dwc->scratchbuf)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int dwc3_setup_scratch_buffers(struct dwc3 *dwc)
+{
+	dma_addr_t scratch_addr;
+	u32 param;
+	int ret;
+
+	if (!dwc->has_hibernation)
+		return 0;
+
+	if (!dwc->nr_scratch)
+		return 0;
+
+	 /* should never fall here */
+	if (!WARN_ON(dwc->scratchbuf))
+		return 0;
+
+	scratch_addr = dma_map_single(dwc->dev, dwc->scratchbuf,
+			dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE,
+			DMA_BIDIRECTIONAL);
+	if (dma_mapping_error(dwc->dev, scratch_addr)) {
+		dev_err(dwc->dev, "failed to map scratch buffer\n");
+		ret = -EFAULT;
+		goto err0;
+	}
+
+	dwc->scratch_addr = scratch_addr;
+
+	param = lower_32_bits(scratch_addr);
+
+	ret = dwc3_send_gadget_generic_command(dwc,
+			DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param);
+	if (ret < 0)
+		goto err1;
+
+	param = upper_32_bits(scratch_addr);
+
+	ret = dwc3_send_gadget_generic_command(dwc,
+			DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param);
+	if (ret < 0)
+		goto err1;
+
+	return 0;
+
+err1:
+	dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch *
+			DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
+
+err0:
+	return ret;
+}
+
+static void dwc3_free_scratch_buffers(struct dwc3 *dwc)
+{
+	if (!dwc->has_hibernation)
+		return;
+
+	if (!dwc->nr_scratch)
+		return;
+
+	 /* should never fall here */
+	if (!WARN_ON(dwc->scratchbuf))
+		return;
+
+	dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch *
+			DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
+	kfree(dwc->scratchbuf);
+}
+
 static void dwc3_core_num_eps(struct dwc3 *dwc)
 {
 	struct dwc3_hwparams	*parms = &dwc->hwparams;
@@ -277,6 +373,7 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
 static int dwc3_core_init(struct dwc3 *dwc)
 {
 	unsigned long		timeout;
+	u32			hwparams4 = dwc->hwparams.hwparams4;
 	u32			reg;
 	int			ret;
 
@@ -306,7 +403,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		cpu_relax();
 	} while (true);
 
-	dwc3_core_soft_reset(dwc);
+	ret = dwc3_core_soft_reset(dwc);
+	if (ret)
+		goto err0;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
@@ -314,7 +413,29 @@ static int dwc3_core_init(struct dwc3 *dwc)
 
 	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
 	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
-		reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+		/**
+		 * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an
+		 * issue which would cause xHCI compliance tests to fail.
+		 *
+		 * Because of that we cannot enable clock gating on such
+		 * configurations.
+		 *
+		 * Refers to:
+		 *
+		 * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based
+		 * SOF/ITP Mode Used
+		 */
+		if ((dwc->dr_mode == USB_DR_MODE_HOST ||
+				dwc->dr_mode == USB_DR_MODE_OTG) &&
+				(dwc->revision >= DWC3_REVISION_210A &&
+				dwc->revision <= DWC3_REVISION_250A))
+			reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC;
+		else
+			reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+		break;
+	case DWC3_GHWPARAMS1_EN_PWROPT_HIB:
+		/* enable hibernation here */
+		dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4);
 		break;
 	default:
 		dev_dbg(dwc->dev, "No power optimization available\n");
@@ -333,16 +454,36 @@ static int dwc3_core_init(struct dwc3 *dwc)
 
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 
+	ret = dwc3_alloc_scratch_buffers(dwc);
+	if (ret)
+		goto err1;
+
+	ret = dwc3_setup_scratch_buffers(dwc);
+	if (ret)
+		goto err2;
+
 	return 0;
 
+err2:
+	dwc3_free_scratch_buffers(dwc);
+
+err1:
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
+
 err0:
 	return ret;
 }
 
 static void dwc3_core_exit(struct dwc3 *dwc)
 {
+	dwc3_free_scratch_buffers(dwc);
 	usb_phy_shutdown(dwc->usb2_phy);
 	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
 }
 
 #define DWC3_ALIGN_MASK		(16 - 1)
@@ -411,32 +552,52 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	if (IS_ERR(dwc->usb2_phy)) {
 		ret = PTR_ERR(dwc->usb2_phy);
-
-		/*
-		 * if -ENXIO is returned, it means PHY layer wasn't
-		 * enabled, so it makes no sense to return -EPROBE_DEFER
-		 * in that case, since no PHY driver will ever probe.
-		 */
-		if (ret == -ENXIO)
+		if (ret == -ENXIO || ret == -ENODEV) {
+			dwc->usb2_phy = NULL;
+		} else if (ret == -EPROBE_DEFER) {
 			return ret;
-
-		dev_err(dev, "no usb2 phy configured\n");
-		return -EPROBE_DEFER;
+		} else {
+			dev_err(dev, "no usb2 phy configured\n");
+			return ret;
+		}
 	}
 
 	if (IS_ERR(dwc->usb3_phy)) {
 		ret = PTR_ERR(dwc->usb3_phy);
+		if (ret == -ENXIO || ret == -ENODEV) {
+			dwc->usb3_phy = NULL;
+		} else if (ret == -EPROBE_DEFER) {
+			return ret;
+		} else {
+			dev_err(dev, "no usb3 phy configured\n");
+			return ret;
+		}
+	}
 
-		/*
-		 * if -ENXIO is returned, it means PHY layer wasn't
-		 * enabled, so it makes no sense to return -EPROBE_DEFER
-		 * in that case, since no PHY driver will ever probe.
-		 */
-		if (ret == -ENXIO)
+	dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
+	if (IS_ERR(dwc->usb2_generic_phy)) {
+		ret = PTR_ERR(dwc->usb2_generic_phy);
+		if (ret == -ENOSYS || ret == -ENODEV) {
+			dwc->usb2_generic_phy = NULL;
+		} else if (ret == -EPROBE_DEFER) {
+			return ret;
+		} else {
+			dev_err(dev, "no usb2 phy configured\n");
 			return ret;
+		}
+	}
 
-		dev_err(dev, "no usb3 phy configured\n");
-		return -EPROBE_DEFER;
+	dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
+	if (IS_ERR(dwc->usb3_generic_phy)) {
+		ret = PTR_ERR(dwc->usb3_generic_phy);
+		if (ret == -ENOSYS || ret == -ENODEV) {
+			dwc->usb3_generic_phy = NULL;
+		} else if (ret == -EPROBE_DEFER) {
+			return ret;
+		} else {
+			dev_err(dev, "no usb3 phy configured\n");
+			return ret;
+		}
 	}
 
 	dwc->xhci_resources[0].start = res->start;
@@ -479,6 +640,14 @@ static int dwc3_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
+	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
+		dwc->dr_mode = USB_DR_MODE_HOST;
+	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
+		dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
+
+	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
+		dwc->dr_mode = USB_DR_MODE_OTG;
+
 	ret = dwc3_core_init(dwc);
 	if (ret) {
 		dev_err(dev, "failed to initialize core\n");
@@ -487,21 +656,20 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	usb_phy_set_suspend(dwc->usb2_phy, 0);
 	usb_phy_set_suspend(dwc->usb3_phy, 0);
+	ret = phy_power_on(dwc->usb2_generic_phy);
+	if (ret < 0)
+		goto err1;
+
+	ret = phy_power_on(dwc->usb3_generic_phy);
+	if (ret < 0)
+		goto err_usb2phy_power;
 
 	ret = dwc3_event_buffers_setup(dwc);
 	if (ret) {
 		dev_err(dwc->dev, "failed to setup event buffers\n");
-		goto err1;
+		goto err_usb3phy_power;
 	}
 
-	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
-		dwc->dr_mode = USB_DR_MODE_HOST;
-	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
-		dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
-
-	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
-		dwc->dr_mode = USB_DR_MODE_OTG;
-
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
 		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
@@ -568,6 +736,12 @@ err3:
 err2:
 	dwc3_event_buffers_cleanup(dwc);
 
+err_usb3phy_power:
+	phy_power_off(dwc->usb3_generic_phy);
+
+err_usb2phy_power:
+	phy_power_off(dwc->usb2_generic_phy);
+
 err1:
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
@@ -585,6 +759,8 @@ static int dwc3_remove(struct platform_device *pdev)
 
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
+	phy_power_off(dwc->usb2_generic_phy);
+	phy_power_off(dwc->usb3_generic_phy);
 
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
@@ -682,6 +858,8 @@ static int dwc3_suspend(struct device *dev)
 
 	usb_phy_shutdown(dwc->usb3_phy);
 	usb_phy_shutdown(dwc->usb2_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
 
 	return 0;
 }
@@ -690,9 +868,17 @@ static int dwc3_resume(struct device *dev)
 {
 	struct dwc3	*dwc = dev_get_drvdata(dev);
 	unsigned long	flags;
+	int		ret;
 
 	usb_phy_init(dwc->usb3_phy);
 	usb_phy_init(dwc->usb2_phy);
+	ret = phy_init(dwc->usb2_generic_phy);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_init(dwc->usb3_generic_phy);
+	if (ret < 0)
+		goto err_usb2phy_init;
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
@@ -716,6 +902,11 @@ static int dwc3_resume(struct device *dev)
 	pm_runtime_enable(dev);
 
 	return 0;
+
+err_usb2phy_init:
+	phy_exit(dwc->usb2_generic_phy);
+
+	return ret;
 }
 
 static const struct dev_pm_ops dwc3_dev_pm_ops = {
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index f8af8d44af85..57332e3768e4 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -31,11 +31,14 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 
+#include <linux/phy/phy.h>
+
 /* Global constants */
 #define DWC3_EP0_BOUNCE_SIZE	512
 #define DWC3_ENDPOINTS_NUM	32
 #define DWC3_XHCI_RESOURCES_NUM	2
 
+#define DWC3_SCRATCHBUF_SIZE	4096	/* each buffer is assumed to be 4KiB */
 #define DWC3_EVENT_SIZE		4	/* bytes */
 #define DWC3_EVENT_MAX_NUM	64	/* 2 events/endpoint */
 #define DWC3_EVENT_BUFFERS_SIZE	(DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM)
@@ -157,6 +160,7 @@
 #define DWC3_GCTL_PRTCAP_OTG	3
 
 #define DWC3_GCTL_CORESOFTRESET		(1 << 11)
+#define DWC3_GCTL_SOFITPSYNC		(1 << 10)
 #define DWC3_GCTL_SCALEDOWN(n)		((n) << 4)
 #define DWC3_GCTL_SCALEDOWN_MASK	DWC3_GCTL_SCALEDOWN(3)
 #define DWC3_GCTL_DISSCRAMBLE		(1 << 3)
@@ -318,7 +322,7 @@
 /* Device Endpoint Command Register */
 #define DWC3_DEPCMD_PARAM_SHIFT		16
 #define DWC3_DEPCMD_PARAM(x)		((x) << DWC3_DEPCMD_PARAM_SHIFT)
-#define DWC3_DEPCMD_GET_RSC_IDX(x)     (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
+#define DWC3_DEPCMD_GET_RSC_IDX(x)	(((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
 #define DWC3_DEPCMD_STATUS(x)		(((x) >> 15) & 1)
 #define DWC3_DEPCMD_HIPRI_FORCERM	(1 << 11)
 #define DWC3_DEPCMD_CMDACT		(1 << 10)
@@ -393,6 +397,7 @@ struct dwc3_event_buffer {
  * @busy_slot: first slot which is owned by HW
  * @desc: usb_endpoint_descriptor pointer
  * @dwc: pointer to DWC controller
+ * @saved_state: ep state saved during hibernation
  * @flags: endpoint flags (wedged, stalled, ...)
  * @current_trb: index of current used trb
  * @number: endpoint number (1 - 15)
@@ -415,6 +420,7 @@ struct dwc3_ep {
 	const struct usb_ss_ep_comp_descriptor *comp_desc;
 	struct dwc3		*dwc;
 
+	u32			saved_state;
 	unsigned		flags;
 #define DWC3_EP_ENABLED		(1 << 0)
 #define DWC3_EP_STALL		(1 << 1)
@@ -598,6 +604,7 @@ struct dwc3_scratchpad_array {
  * @ep0_trb: dma address of ep0_trb
  * @ep0_usb_req: dummy req used while handling STD USB requests
  * @ep0_bounce_addr: dma address of ep0_bounce
+ * @scratch_addr: dma address of scratchbuf
  * @lock: for synchronizing
  * @dev: pointer to our struct device
  * @xhci: pointer to our xHCI child
@@ -606,6 +613,7 @@ struct dwc3_scratchpad_array {
  * @gadget_driver: pointer to the gadget driver
  * @regs: base address for our registers
  * @regs_size: address space size
+ * @nr_scratch: number of scratch buffers
  * @num_event_buffers: calculated number of event buffers
  * @u1u2: only used on revisions <1.83a for workaround
  * @maximum_speed: maximum speed requested (mainly for testing purposes)
@@ -613,16 +621,10 @@ struct dwc3_scratchpad_array {
  * @dr_mode: requested mode of operation
  * @usb2_phy: pointer to USB2 PHY
  * @usb3_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to USB2 PHY
+ * @usb3_generic_phy: pointer to USB3 PHY
  * @dcfg: saved contents of DCFG register
  * @gctl: saved contents of GCTL register
- * @is_selfpowered: true when we are selfpowered
- * @three_stage_setup: set if we perform a three phase setup
- * @ep0_bounced: true when we used bounce buffer
- * @ep0_expect_in: true when we expect a DATA IN transfer
- * @start_config_issued: true when StartConfig command has been issued
- * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
- * @needs_fifo_resize: not all users might want fifo resizing, flag it
- * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
  * @isoch_delay: wValue from Set Isochronous Delay request;
  * @u2sel: parameter from Set SEL request.
  * @u2pel: parameter from Set SEL request.
@@ -637,15 +639,31 @@ struct dwc3_scratchpad_array {
  * @mem: points to start of memory which is used for this struct.
  * @hwparams: copy of hwparams registers
  * @root: debugfs root folder pointer
+ * @regset: debugfs pointer to regdump file
+ * @test_mode: true when we're entering a USB test mode
+ * @test_mode_nr: test feature selector
+ * @delayed_status: true when gadget driver asks for delayed status
+ * @ep0_bounced: true when we used bounce buffer
+ * @ep0_expect_in: true when we expect a DATA IN transfer
+ * @has_hibernation: true when dwc3 was configured with Hibernation
+ * @is_selfpowered: true when we are selfpowered
+ * @needs_fifo_resize: not all users might want fifo resizing, flag it
+ * @pullups_connected: true when Run/Stop bit is set
+ * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
+ * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
+ * @start_config_issued: true when StartConfig command has been issued
+ * @three_stage_setup: set if we perform a three phase setup
  */
 struct dwc3 {
 	struct usb_ctrlrequest	*ctrl_req;
 	struct dwc3_trb		*ep0_trb;
 	void			*ep0_bounce;
+	void			*scratchbuf;
 	u8			*setup_buf;
 	dma_addr_t		ctrl_req_addr;
 	dma_addr_t		ep0_trb_addr;
 	dma_addr_t		ep0_bounce_addr;
+	dma_addr_t		scratch_addr;
 	struct dwc3_request	ep0_usb_req;
 
 	/* device lock */
@@ -665,6 +683,9 @@ struct dwc3 {
 	struct usb_phy		*usb2_phy;
 	struct usb_phy		*usb3_phy;
 
+	struct phy		*usb2_generic_phy;
+	struct phy		*usb3_generic_phy;
+
 	void __iomem		*regs;
 	size_t			regs_size;
 
@@ -674,6 +695,7 @@ struct dwc3 {
 	u32			dcfg;
 	u32			gctl;
 
+	u32			nr_scratch;
 	u32			num_event_buffers;
 	u32			u1u2;
 	u32			maximum_speed;
@@ -695,17 +717,9 @@ struct dwc3 {
 #define DWC3_REVISION_230A	0x5533230a
 #define DWC3_REVISION_240A	0x5533240a
 #define DWC3_REVISION_250A	0x5533250a
-
-	unsigned		is_selfpowered:1;
-	unsigned		three_stage_setup:1;
-	unsigned		ep0_bounced:1;
-	unsigned		ep0_expect_in:1;
-	unsigned		start_config_issued:1;
-	unsigned		setup_packet_pending:1;
-	unsigned		delayed_status:1;
-	unsigned		needs_fifo_resize:1;
-	unsigned		resize_fifos:1;
-	unsigned		pullups_connected:1;
+#define DWC3_REVISION_260A	0x5533260a
+#define DWC3_REVISION_270A	0x5533270a
+#define DWC3_REVISION_280A	0x5533280a
 
 	enum dwc3_ep0_next	ep0_next_event;
 	enum dwc3_ep0_state	ep0state;
@@ -730,6 +744,18 @@ struct dwc3 {
 
 	u8			test_mode;
 	u8			test_mode_nr;
+
+	unsigned		delayed_status:1;
+	unsigned		ep0_bounced:1;
+	unsigned		ep0_expect_in:1;
+	unsigned		has_hibernation:1;
+	unsigned		is_selfpowered:1;
+	unsigned		needs_fifo_resize:1;
+	unsigned		pullups_connected:1;
+	unsigned		resize_fifos:1;
+	unsigned		setup_packet_pending:1;
+	unsigned		start_config_issued:1;
+	unsigned		three_stage_setup:1;
 };
 
 /* -------------------------------------------------------------------------- */
@@ -815,15 +841,15 @@ struct dwc3_event_depevt {
  *	12	- VndrDevTstRcved
  * @reserved15_12: Reserved, not used
  * @event_info: Information about this event
- * @reserved31_24: Reserved, not used
+ * @reserved31_25: Reserved, not used
  */
 struct dwc3_event_devt {
 	u32	one_bit:1;
 	u32	device_event:7;
 	u32	type:4;
 	u32	reserved15_12:4;
-	u32	event_info:8;
-	u32	reserved31_24:8;
+	u32	event_info:9;
+	u32	reserved31_25:7;
 } __packed;
 
 /**
@@ -856,6 +882,19 @@ union dwc3_event {
 	struct dwc3_event_gevt		gevt;
 };
 
+/**
+ * struct dwc3_gadget_ep_cmd_params - representation of endpoint command
+ * parameters
+ * @param2: third parameter
+ * @param1: second parameter
+ * @param0: first parameter
+ */
+struct dwc3_gadget_ep_cmd_params {
+	u32	param2;
+	u32	param1;
+	u32	param0;
+};
+
 /*
  * DWC3 Features to be used as Driver Data
  */
@@ -881,11 +920,31 @@ static inline void dwc3_host_exit(struct dwc3 *dwc)
 #if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
 int dwc3_gadget_init(struct dwc3 *dwc);
 void dwc3_gadget_exit(struct dwc3 *dwc);
+int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
+int dwc3_gadget_get_link_state(struct dwc3 *dwc);
+int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
+int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param);
 #else
 static inline int dwc3_gadget_init(struct dwc3 *dwc)
 { return 0; }
 static inline void dwc3_gadget_exit(struct dwc3 *dwc)
 { }
+static inline int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
+{ return 0; }
+static inline int dwc3_gadget_get_link_state(struct dwc3 *dwc)
+{ return 0; }
+static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc,
+		enum dwc3_link_state state)
+{ return 0; }
+
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+{ return 0; }
+static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
+		int cmd, u32 param)
+{ return 0; }
 #endif
 
 /* power management interface */
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index b1d7ee6e40b7..1160ff41bed4 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -423,11 +423,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "missing memory base resource\n");
-		return -EINVAL;
-	}
-
 	base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2da0a5a2803a..a740eac74d56 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -68,6 +68,22 @@ int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
 }
 
 /**
+ * dwc3_gadget_get_link_state - Gets current state of USB Link
+ * @dwc: pointer to our context structure
+ *
+ * Caller should take care of locking. This function will
+ * return the link state on success (>= 0) or -ETIMEDOUT.
+ */
+int dwc3_gadget_get_link_state(struct dwc3 *dwc)
+{
+	u32		reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+	return DWC3_DSTS_USBLNKST(reg);
+}
+
+/**
  * dwc3_gadget_set_link_state - Sets USB Link to a particular State
  * @dwc: pointer to our context structure
  * @state: the state to put link into
@@ -417,7 +433,7 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
 static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 		const struct usb_endpoint_descriptor *desc,
 		const struct usb_ss_ep_comp_descriptor *comp_desc,
-		bool ignore)
+		bool ignore, bool restore)
 {
 	struct dwc3_gadget_ep_cmd_params params;
 
@@ -436,6 +452,11 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 	if (ignore)
 		params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM;
 
+	if (restore) {
+		params.param0 |= DWC3_DEPCFG_ACTION_RESTORE;
+		params.param2 |= dep->saved_state;
+	}
+
 	params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
 		| DWC3_DEPCFG_XFER_NOT_READY_EN;
 
@@ -494,7 +515,7 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
 static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 		const struct usb_endpoint_descriptor *desc,
 		const struct usb_ss_ep_comp_descriptor *comp_desc,
-		bool ignore)
+		bool ignore, bool restore)
 {
 	struct dwc3		*dwc = dep->dwc;
 	u32			reg;
@@ -508,7 +529,8 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 			return ret;
 	}
 
-	ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore);
+	ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore,
+			restore);
 	if (ret)
 		return ret;
 
@@ -548,13 +570,13 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 	return 0;
 }
 
-static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum);
+static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force);
 static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
 {
 	struct dwc3_request		*req;
 
 	if (!list_empty(&dep->req_queued)) {
-		dwc3_stop_active_transfer(dwc, dep->number);
+		dwc3_stop_active_transfer(dwc, dep->number, true);
 
 		/* - giveback all requests to gadget driver */
 		while (!list_empty(&dep->req_queued)) {
@@ -659,7 +681,7 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep,
 	}
 
 	spin_lock_irqsave(&dwc->lock, flags);
-	ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false);
+	ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return ret;
@@ -771,9 +793,6 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 			trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
 		else
 			trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
-
-		if (!req->request.no_interrupt && !chain)
-			trb->ctrl |= DWC3_TRB_CTRL_IOC;
 		break;
 
 	case USB_ENDPOINT_XFER_BULK:
@@ -788,6 +807,9 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 		BUG();
 	}
 
+	if (!req->request.no_interrupt && !chain)
+		trb->ctrl |= DWC3_TRB_CTRL_IOC;
+
 	if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 		trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 		trb->ctrl |= DWC3_TRB_CTRL_CSP;
@@ -1077,7 +1099,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 		 */
 		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 			if (list_empty(&dep->req_queued)) {
-				dwc3_stop_active_transfer(dwc, dep->number);
+				dwc3_stop_active_transfer(dwc, dep->number, true);
 				dep->flags = DWC3_EP_ENABLED;
 			}
 			return 0;
@@ -1107,6 +1129,23 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 		return ret;
 	}
 
+	/*
+	 * 4. Stream Capable Bulk Endpoints. We need to start the transfer
+	 * right away, otherwise host will not know we have streams to be
+	 * handled.
+	 */
+	if (dep->stream_capable) {
+		int	ret;
+
+		ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+		if (ret && ret != -EBUSY) {
+			struct dwc3	*dwc = dep->dwc;
+
+			dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+					dep->name);
+		}
+	}
+
 	return 0;
 }
 
@@ -1163,7 +1202,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 		}
 		if (r == req) {
 			/* wait until it is processed */
-			dwc3_stop_active_transfer(dwc, dep->number);
+			dwc3_stop_active_transfer(dwc, dep->number, true);
 			goto out1;
 		}
 		dev_err(dwc->dev, "request %p was not queued to %s\n",
@@ -1194,8 +1233,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
 		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
 			DWC3_DEPCMD_SETSTALL, &params);
 		if (ret)
-			dev_err(dwc->dev, "failed to %s STALL on %s\n",
-					value ? "set" : "clear",
+			dev_err(dwc->dev, "failed to set STALL on %s\n",
 					dep->name);
 		else
 			dep->flags |= DWC3_EP_STALL;
@@ -1203,8 +1241,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
 		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
 			DWC3_DEPCMD_CLEARSTALL, &params);
 		if (ret)
-			dev_err(dwc->dev, "failed to %s STALL on %s\n",
-					value ? "set" : "clear",
+			dev_err(dwc->dev, "failed to clear STALL on %s\n",
 					dep->name);
 		else
 			dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
@@ -1387,7 +1424,7 @@ static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
 	return 0;
 }
 
-static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
+static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
 {
 	u32			reg;
 	u32			timeout = 500;
@@ -1402,9 +1439,17 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
 		if (dwc->revision >= DWC3_REVISION_194A)
 			reg &= ~DWC3_DCTL_KEEP_CONNECT;
 		reg |= DWC3_DCTL_RUN_STOP;
+
+		if (dwc->has_hibernation)
+			reg |= DWC3_DCTL_KEEP_CONNECT;
+
 		dwc->pullups_connected = true;
 	} else {
 		reg &= ~DWC3_DCTL_RUN_STOP;
+
+		if (dwc->has_hibernation && !suspend)
+			reg &= ~DWC3_DCTL_KEEP_CONNECT;
+
 		dwc->pullups_connected = false;
 	}
 
@@ -1442,7 +1487,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 	is_on = !!is_on;
 
 	spin_lock_irqsave(&dwc->lock, flags);
-	ret = dwc3_gadget_run_stop(dwc, is_on);
+	ret = dwc3_gadget_run_stop(dwc, is_on, false);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return ret;
@@ -1549,14 +1594,16 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
 
 	dep = dwc->eps[0];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
+			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
 		goto err2;
 	}
 
 	dep = dwc->eps[1];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
+			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
 		goto err3;
@@ -1849,15 +1896,12 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 			 */
 			dep->flags = DWC3_EP_PENDING_REQUEST;
 		} else {
-			dwc3_stop_active_transfer(dwc, dep->number);
+			dwc3_stop_active_transfer(dwc, dep->number, true);
 			dep->flags = DWC3_EP_ENABLED;
 		}
 		return 1;
 	}
 
-	if ((event->status & DEPEVT_STATUS_IOC) &&
-			(trb->ctrl & DWC3_TRB_CTRL_IOC))
-		return 0;
 	return 1;
 }
 
@@ -1999,7 +2043,25 @@ static void dwc3_disconnect_gadget(struct dwc3 *dwc)
 	}
 }
 
-static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
+static void dwc3_suspend_gadget(struct dwc3 *dwc)
+{
+	if (dwc->gadget_driver && dwc->gadget_driver->suspend) {
+		spin_unlock(&dwc->lock);
+		dwc->gadget_driver->suspend(&dwc->gadget);
+		spin_lock(&dwc->lock);
+	}
+}
+
+static void dwc3_resume_gadget(struct dwc3 *dwc)
+{
+	if (dwc->gadget_driver && dwc->gadget_driver->resume) {
+		spin_unlock(&dwc->lock);
+		dwc->gadget_driver->resume(&dwc->gadget);
+		spin_lock(&dwc->lock);
+	}
+}
+
+static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force)
 {
 	struct dwc3_ep *dep;
 	struct dwc3_gadget_ep_cmd_params params;
@@ -2031,7 +2093,8 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
 	 */
 
 	cmd = DWC3_DEPCMD_ENDTRANSFER;
-	cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC;
+	cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0;
+	cmd |= DWC3_DEPCMD_CMDIOC;
 	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
 	memset(&params, 0, sizeof(params));
 	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
@@ -2260,17 +2323,23 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		reg |= DWC3_DCTL_HIRD_THRES(12);
 
 		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+	} else {
+		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+		reg &= ~DWC3_DCTL_HIRD_THRES_MASK;
+		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 	}
 
 	dep = dwc->eps[0];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true,
+			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
 		return;
 	}
 
 	dep = dwc->eps[1];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true,
+			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
 		return;
@@ -2378,9 +2447,50 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
 
 	dwc->link_state = next;
 
+	switch (next) {
+	case DWC3_LINK_STATE_U1:
+		if (dwc->speed == USB_SPEED_SUPER)
+			dwc3_suspend_gadget(dwc);
+		break;
+	case DWC3_LINK_STATE_U2:
+	case DWC3_LINK_STATE_U3:
+		dwc3_suspend_gadget(dwc);
+		break;
+	case DWC3_LINK_STATE_RESUME:
+		dwc3_resume_gadget(dwc);
+		break;
+	default:
+		/* do nothing */
+		break;
+	}
+
 	dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state);
 }
 
+static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc,
+		unsigned int evtinfo)
+{
+	unsigned int is_ss = evtinfo & BIT(4);
+
+	/**
+	 * WORKAROUND: DWC3 revison 2.20a with hibernation support
+	 * have a known issue which can cause USB CV TD.9.23 to fail
+	 * randomly.
+	 *
+	 * Because of this issue, core could generate bogus hibernation
+	 * events which SW needs to ignore.
+	 *
+	 * Refers to:
+	 *
+	 * STAR#9000546576: Device Mode Hibernation: Issue in USB 2.0
+	 * Device Fallback from SuperSpeed
+	 */
+	if (is_ss ^ (dwc->speed == USB_SPEED_SUPER))
+		return;
+
+	/* enter hibernation here */
+}
+
 static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		const struct dwc3_event_devt *event)
 {
@@ -2397,6 +2507,13 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 	case DWC3_DEVICE_EVENT_WAKEUP:
 		dwc3_gadget_wakeup_interrupt(dwc);
 		break;
+	case DWC3_DEVICE_EVENT_HIBER_REQ:
+		if (dev_WARN_ONCE(dwc->dev, !dwc->has_hibernation,
+					"unexpected hibernation event\n"))
+			break;
+
+		dwc3_gadget_hibernation_interrupt(dwc, event->event_info);
+		break;
 	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
 		dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
 		break;
@@ -2661,8 +2778,10 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 
 int dwc3_gadget_prepare(struct dwc3 *dwc)
 {
-	if (dwc->pullups_connected)
+	if (dwc->pullups_connected) {
 		dwc3_gadget_disable_irq(dwc);
+		dwc3_gadget_run_stop(dwc, true, true);
+	}
 
 	return 0;
 }
@@ -2671,7 +2790,7 @@ void dwc3_gadget_complete(struct dwc3 *dwc)
 {
 	if (dwc->pullups_connected) {
 		dwc3_gadget_enable_irq(dwc);
-		dwc3_gadget_run_stop(dwc, true);
+		dwc3_gadget_run_stop(dwc, true, false);
 	}
 }
 
@@ -2694,12 +2813,14 @@ int dwc3_gadget_resume(struct dwc3 *dwc)
 	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
 
 	dep = dwc->eps[0];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
+			false);
 	if (ret)
 		goto err0;
 
 	dep = dwc->eps[1];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
+			false);
 	if (ret)
 		goto err1;
 
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index febe1aa7b714..a0ee75b68a80 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -56,12 +56,6 @@ struct dwc3;
 /* DEPXFERCFG parameter 0 */
 #define DWC3_DEPXFERCFG_NUM_XFER_RES(n)	((n) & 0xffff)
 
-struct dwc3_gadget_ep_cmd_params {
-	u32	param2;
-	u32	param1;
-	u32	param0;
-};
-
 /* -------------------------------------------------------------------------- */
 
 #define to_dwc3_request(r)	(container_of(r, struct dwc3_request, request))
@@ -85,9 +79,6 @@ static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 		int status);
 
-int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
-int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
-
 void dwc3_ep0_interrupt(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event);
 void dwc3_ep0_out_start(struct dwc3 *dwc);
@@ -95,9 +86,6 @@ int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
 int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 		gfp_t gfp_flags);
 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
-int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
-		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
-int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param);
 
 /**
  * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW