summaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc3
diff options
context:
space:
mode:
authorAnurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>2019-05-10 12:37:28 +0530
committerFelipe Balbi <felipe.balbi@linux.intel.com>2019-06-18 11:58:30 +0300
commit729dcffd1ed319c9738456543f382d0801e768b8 (patch)
treede783b03f5dbcbffb6f499bf2c09a76354cabe85 /drivers/usb/dwc3
parent4ed9890c4c44d2ead7b57ad65425e3fbe9b9d42a (diff)
downloadlinux-729dcffd1ed319c9738456543f382d0801e768b8.tar.gz
linux-729dcffd1ed319c9738456543f382d0801e768b8.tar.bz2
linux-729dcffd1ed319c9738456543f382d0801e768b8.zip
usb: dwc3: gadget: Add support for disabling U1 and U2 entries
Gadget applications may have a requirement to disable the U1 and U2 entry based on the usecase. Below are few usecases where the disabling U1/U2 entries may be possible. Usecase 1: When combining dwc3 with an redriver for a USB Type-C device solution, it sometimes have problems with leaving U1/U2 for certain hosts, resulting in link training errors and reconnects. For this U1/U2 state entries may be avoided. Usecase 2: When performing performance benchmarking on mass storage gadget the U1 and U2 entries can be disabled. Usecase 3: When periodic transfers like ISOC transfers are used with bInterval of 1 which doesn't require the link to enter into U1 or U2 state entry (since ping is issued from host for every uframe interval). In this case the U1 and U2 entry can be disabled. Disablement of U1/U2 can be done by setting U1DevExitLat and U2DevExitLat values to 0 in the BOS descriptor. Host on seeing 0 value for U1DevExitLat and U2DevExitLat, it doesn't send SET_SEL requests to the gadget. There may be some hosts which may send SET_SEL requests even after seeing 0 in the UxDevExitLat of BOS descriptor. To aviod U1/U2 entries for these type of hosts, dwc3 controller can be programmed to reject those U1/U2 requests by not enabling ACCEPTUxENA bits in DCTL register. This patch updates the same. Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> Signed-off-by: Claus H. Stovgaard <cst@phaseone.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r--drivers/usb/dwc3/core.c4
-rw-r--r--drivers/usb/dwc3/core.h4
-rw-r--r--drivers/usb/dwc3/ep0.c9
-rw-r--r--drivers/usb/dwc3/gadget.c20
-rw-r--r--drivers/usb/dwc3/gadget.h6
5 files changed, 42 insertions, 1 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 6e9e172010fc..c9bb93a2c81e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1282,6 +1282,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
"snps,dis_u2_susphy_quirk");
dwc->dis_enblslpm_quirk = device_property_read_bool(dev,
"snps,dis_enblslpm_quirk");
+ dwc->dis_u1_entry_quirk = device_property_read_bool(dev,
+ "snps,dis-u1-entry-quirk");
+ dwc->dis_u2_entry_quirk = device_property_read_bool(dev,
+ "snps,dis-u2-entry-quirk");
dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev,
"snps,dis_rxdet_inp3_quirk");
dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev,
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index f19cbeb01087..241b491489d9 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1014,6 +1014,8 @@ struct dwc3_scratchpad_array {
* @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
* @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG,
* disabling the suspend signal to the PHY.
+ * @dis_u1_entry_quirk: set if link entering into U1 state needs to be disabled.
+ * @dis_u2_entry_quirk: set if link entering into U2 state needs to be disabled.
* @dis_rxdet_inp3_quirk: set if we disable Rx.Detect in P3
* @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
* in GUSB2PHYCFG, specify that USB2 PHY doesn't
@@ -1205,6 +1207,8 @@ struct dwc3 {
unsigned dis_u3_susphy_quirk:1;
unsigned dis_u2_susphy_quirk:1;
unsigned dis_enblslpm_quirk:1;
+ unsigned dis_u1_entry_quirk:1;
+ unsigned dis_u2_entry_quirk:1;
unsigned dis_rxdet_inp3_quirk:1;
unsigned dis_u2_freeclk_exists_quirk:1;
unsigned dis_del_phy_power_chg_quirk:1;
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 8efde178eef4..3996b9c4ff8d 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -379,6 +379,8 @@ static int dwc3_ep0_handle_u1(struct dwc3 *dwc, enum usb_device_state state,
if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
(dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
return -EINVAL;
+ if (set && dwc->dis_u1_entry_quirk)
+ return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (set)
@@ -401,6 +403,8 @@ static int dwc3_ep0_handle_u2(struct dwc3 *dwc, enum usb_device_state state,
if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
(dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
return -EINVAL;
+ if (set && dwc->dis_u2_entry_quirk)
+ return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (set)
@@ -626,7 +630,10 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
* nothing is pending from application.
*/
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
- reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA);
+ if (!dwc->dis_u1_entry_quirk)
+ reg |= DWC3_DCTL_ACCEPTU1ENA;
+ if (!dwc->dis_u2_entry_quirk)
+ reg |= DWC3_DCTL_ACCEPTU2ENA;
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
}
break;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index d67655384eb2..2751d3e98f5f 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2073,6 +2073,25 @@ out:
return 0;
}
+static void dwc3_gadget_config_params(struct usb_gadget *g,
+ struct usb_dcd_config_params *params)
+{
+ struct dwc3 *dwc = gadget_to_dwc(g);
+
+ /* U1 Device exit Latency */
+ if (dwc->dis_u1_entry_quirk)
+ params->bU1devExitLat = 0;
+ else
+ params->bU1devExitLat = DWC3_DEFAULT_U1_DEV_EXIT_LAT;
+
+ /* U2 Device exit Latency */
+ if (dwc->dis_u2_entry_quirk)
+ params->bU2DevExitLat = 0;
+ else
+ params->bU2DevExitLat =
+ cpu_to_le16(DWC3_DEFAULT_U2_DEV_EXIT_LAT);
+}
+
static void dwc3_gadget_set_speed(struct usb_gadget *g,
enum usb_device_speed speed)
{
@@ -2142,6 +2161,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = {
.udc_start = dwc3_gadget_start,
.udc_stop = dwc3_gadget_stop,
.udc_set_speed = dwc3_gadget_set_speed,
+ .get_config_params = dwc3_gadget_config_params,
};
/* -------------------------------------------------------------------------- */
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 3ed738e86ea7..5faf4d1249e0 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -48,6 +48,12 @@ struct dwc3;
/* DEPXFERCFG parameter 0 */
#define DWC3_DEPXFERCFG_NUM_XFER_RES(n) ((n) & 0xffff)
+/* U1 Device exit Latency */
+#define DWC3_DEFAULT_U1_DEV_EXIT_LAT 0x0A /* Less then 10 microsec */
+
+/* U2 Device exit Latency */
+#define DWC3_DEFAULT_U2_DEV_EXIT_LAT 0x1FF /* Less then 511 microsec */
+
/* -------------------------------------------------------------------------- */
#define to_dwc3_request(r) (container_of(r, struct dwc3_request, request))