Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 728 insertions, 0 deletions

diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
new file mode 100644
index 000000000000..fff4509cf340
--- /dev/null
+++ b/drivers/usb/gadget/net2280.h
@@ -0,0 +1,728 @@
+/*
+ * NetChip 2280 high/full speed USB device controller.
+ * Unlike many such controllers, this one talks PCI.
+ */
+
+/*
+ * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* NET2280 MEMORY MAPPED REGISTERS
+ *
+ * The register layout came from the chip documentation, and the bit
+ * number definitions were extracted from chip specification.
+ *
+ * Use the shift operator ('<<') to build bit masks, with readl/writel
+ * to access the registers through PCI.
+ */
+
+/* main registers, BAR0 + 0x0000 */
+struct net2280_regs {
+	// offset 0x0000
+	u32		devinit;
+#define     LOCAL_CLOCK_FREQUENCY                               8
+#define     FORCE_PCI_RESET                                     7
+#define     PCI_ID                                              6
+#define     PCI_ENABLE                                          5
+#define     FIFO_SOFT_RESET                                     4
+#define     CFG_SOFT_RESET                                      3
+#define     PCI_SOFT_RESET                                      2
+#define     USB_SOFT_RESET                                      1
+#define     M8051_RESET                                         0
+	u32		eectl;
+#define     EEPROM_ADDRESS_WIDTH                                23
+#define     EEPROM_CHIP_SELECT_ACTIVE                           22
+#define     EEPROM_PRESENT                                      21
+#define     EEPROM_VALID                                        20
+#define     EEPROM_BUSY                                         19
+#define     EEPROM_CHIP_SELECT_ENABLE                           18
+#define     EEPROM_BYTE_READ_START                              17
+#define     EEPROM_BYTE_WRITE_START                             16
+#define     EEPROM_READ_DATA                                    8
+#define     EEPROM_WRITE_DATA                                   0
+	u32		eeclkfreq;
+	u32		_unused0;
+	// offset 0x0010
+
+	u32		pciirqenb0;		/* interrupt PCI master ... */
+#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
+#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
+#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
+#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
+#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
+#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
+#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
+#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
+	u32		pciirqenb1;
+#define     PCI_INTERRUPT_ENABLE                                31
+#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
+#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
+#define     PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE          18
+#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
+#define     GPIO_INTERRUPT_ENABLE                               13
+#define     DMA_D_INTERRUPT_ENABLE                              12
+#define     DMA_C_INTERRUPT_ENABLE                              11
+#define     DMA_B_INTERRUPT_ENABLE                              10
+#define     DMA_A_INTERRUPT_ENABLE                              9
+#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
+#define     VBUS_INTERRUPT_ENABLE                               7
+#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
+#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
+#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
+#define     RESUME_INTERRUPT_ENABLE                             1
+#define     SOF_INTERRUPT_ENABLE                                0
+	u32		cpu_irqenb0;		/* ... or onboard 8051 */
+#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
+#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
+#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
+#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
+#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
+#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
+#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
+#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
+	u32		cpu_irqenb1;
+#define     CPU_INTERRUPT_ENABLE                                31
+#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
+#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
+#define     PCI_INTA_INTERRUPT_ENABLE                           24
+#define     PCI_PME_INTERRUPT_ENABLE                            23
+#define     PCI_SERR_INTERRUPT_ENABLE                           22
+#define     PCI_PERR_INTERRUPT_ENABLE                           21
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
+#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
+#define     GPIO_INTERRUPT_ENABLE                               13
+#define     DMA_D_INTERRUPT_ENABLE                              12
+#define     DMA_C_INTERRUPT_ENABLE                              11
+#define     DMA_B_INTERRUPT_ENABLE                              10
+#define     DMA_A_INTERRUPT_ENABLE                              9
+#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
+#define     VBUS_INTERRUPT_ENABLE                               7
+#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
+#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
+#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
+#define     RESUME_INTERRUPT_ENABLE                             1
+#define     SOF_INTERRUPT_ENABLE                                0
+
+	// offset 0x0020
+	u32		_unused1;
+	u32		usbirqenb1;
+#define     USB_INTERRUPT_ENABLE                                31
+#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
+#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
+#define     PCI_INTA_INTERRUPT_ENABLE                           24
+#define     PCI_PME_INTERRUPT_ENABLE                            23
+#define     PCI_SERR_INTERRUPT_ENABLE                           22
+#define     PCI_PERR_INTERRUPT_ENABLE                           21
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
+#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
+#define     GPIO_INTERRUPT_ENABLE                               13
+#define     DMA_D_INTERRUPT_ENABLE                              12
+#define     DMA_C_INTERRUPT_ENABLE                              11
+#define     DMA_B_INTERRUPT_ENABLE                              10
+#define     DMA_A_INTERRUPT_ENABLE                              9
+#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
+#define     VBUS_INTERRUPT_ENABLE                               7
+#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
+#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
+#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
+#define     RESUME_INTERRUPT_ENABLE                             1
+#define     SOF_INTERRUPT_ENABLE                                0
+	u32		irqstat0;
+#define     INTA_ASSERTED                                       12
+#define     SETUP_PACKET_INTERRUPT                              7
+#define     ENDPOINT_F_INTERRUPT                                6
+#define     ENDPOINT_E_INTERRUPT                                5
+#define     ENDPOINT_D_INTERRUPT                                4
+#define     ENDPOINT_C_INTERRUPT                                3
+#define     ENDPOINT_B_INTERRUPT                                2
+#define     ENDPOINT_A_INTERRUPT                                1
+#define     ENDPOINT_0_INTERRUPT                                0
+	u32		irqstat1;
+#define     POWER_STATE_CHANGE_INTERRUPT                        27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT                       26
+#define     PCI_PARITY_ERROR_INTERRUPT                          25
+#define     PCI_INTA_INTERRUPT                                  24
+#define     PCI_PME_INTERRUPT                                   23
+#define     PCI_SERR_INTERRUPT                                  22
+#define     PCI_PERR_INTERRUPT                                  21
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT                 20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT                 19
+#define     PCI_RETRY_ABORT_INTERRUPT                           17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT                     16
+#define     GPIO_INTERRUPT                                      13
+#define     DMA_D_INTERRUPT                                     12
+#define     DMA_C_INTERRUPT                                     11
+#define     DMA_B_INTERRUPT                                     10
+#define     DMA_A_INTERRUPT                                     9
+#define     EEPROM_DONE_INTERRUPT                               8
+#define     VBUS_INTERRUPT                                      7
+#define     CONTROL_STATUS_INTERRUPT                            6
+#define     ROOT_PORT_RESET_INTERRUPT                           4
+#define     SUSPEND_REQUEST_INTERRUPT                           3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT                    2
+#define     RESUME_INTERRUPT                                    1
+#define     SOF_INTERRUPT                                       0
+	// offset 0x0030
+	u32		idxaddr;
+	u32		idxdata;
+	u32		fifoctl;
+#define     PCI_BASE2_RANGE                                     16
+#define     IGNORE_FIFO_AVAILABILITY                            3
+#define     PCI_BASE2_SELECT                                    2
+#define     FIFO_CONFIGURATION_SELECT                           0
+	u32		_unused2;
+	// offset 0x0040
+	u32		memaddr;
+#define     START                                               28
+#define     DIRECTION                                           27
+#define     FIFO_DIAGNOSTIC_SELECT                              24
+#define     MEMORY_ADDRESS                                      0
+	u32		memdata0;
+	u32		memdata1;
+	u32		_unused3;
+	// offset 0x0050
+	u32		gpioctl;
+#define     GPIO3_LED_SELECT                                    12
+#define     GPIO3_INTERRUPT_ENABLE                              11
+#define     GPIO2_INTERRUPT_ENABLE                              10
+#define     GPIO1_INTERRUPT_ENABLE                              9
+#define     GPIO0_INTERRUPT_ENABLE                              8
+#define     GPIO3_OUTPUT_ENABLE                                 7
+#define     GPIO2_OUTPUT_ENABLE                                 6
+#define     GPIO1_OUTPUT_ENABLE                                 5
+#define     GPIO0_OUTPUT_ENABLE                                 4
+#define     GPIO3_DATA                                          3
+#define     GPIO2_DATA                                          2
+#define     GPIO1_DATA                                          1
+#define     GPIO0_DATA                                          0
+	u32		gpiostat;
+#define     GPIO3_INTERRUPT                                     3
+#define     GPIO2_INTERRUPT                                     2
+#define     GPIO1_INTERRUPT                                     1
+#define     GPIO0_INTERRUPT                                     0
+} __attribute__ ((packed));
+
+/* usb control, BAR0 + 0x0080 */
+struct net2280_usb_regs {
+	// offset 0x0080
+	u32		stdrsp;
+#define     STALL_UNSUPPORTED_REQUESTS                          31
+#define     SET_TEST_MODE                                       16
+#define     GET_OTHER_SPEED_CONFIGURATION                       15
+#define     GET_DEVICE_QUALIFIER                                14
+#define     SET_ADDRESS                                         13
+#define     ENDPOINT_SET_CLEAR_HALT                             12
+#define     DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP               11
+#define     GET_STRING_DESCRIPTOR_2                             10
+#define     GET_STRING_DESCRIPTOR_1                             9
+#define     GET_STRING_DESCRIPTOR_0                             8
+#define     GET_SET_INTERFACE                                   6
+#define     GET_SET_CONFIGURATION                               5
+#define     GET_CONFIGURATION_DESCRIPTOR                        4
+#define     GET_DEVICE_DESCRIPTOR                               3
+#define     GET_ENDPOINT_STATUS                                 2
+#define     GET_INTERFACE_STATUS                                1
+#define     GET_DEVICE_STATUS                                   0
+	u32		prodvendid;
+#define     PRODUCT_ID                                          16
+#define     VENDOR_ID                                           0
+	u32		relnum;
+	u32		usbctl;
+#define     SERIAL_NUMBER_INDEX                                 16
+#define     PRODUCT_ID_STRING_ENABLE                            13
+#define     VENDOR_ID_STRING_ENABLE                             12
+#define     USB_ROOT_PORT_WAKEUP_ENABLE                         11
+#define     VBUS_PIN                                            10
+#define     TIMED_DISCONNECT                                    9
+#define     SUSPEND_IMMEDIATELY                                 7
+#define     SELF_POWERED_USB_DEVICE                             6
+#define     REMOTE_WAKEUP_SUPPORT                               5
+#define     PME_POLARITY                                        4
+#define     USB_DETECT_ENABLE                                   3
+#define     PME_WAKEUP_ENABLE                                   2
+#define     DEVICE_REMOTE_WAKEUP_ENABLE                         1
+#define     SELF_POWERED_STATUS                                 0
+	// offset 0x0090
+	u32		usbstat;
+#define     HIGH_SPEED                                          7
+#define     FULL_SPEED                                          6
+#define     GENERATE_RESUME                                     5
+#define     GENERATE_DEVICE_REMOTE_WAKEUP                       4
+	u32		xcvrdiag;
+#define     FORCE_HIGH_SPEED_MODE                               31
+#define     FORCE_FULL_SPEED_MODE                               30
+#define     USB_TEST_MODE                                       24
+#define     LINE_STATE                                          16
+#define     TRANSCEIVER_OPERATION_MODE                          2
+#define     TRANSCEIVER_SELECT                                  1
+#define     TERMINATION_SELECT                                  0
+	u32		setup0123;
+	u32		setup4567;
+	// offset 0x0090
+	u32		_unused0;
+	u32		ouraddr;
+#define     FORCE_IMMEDIATE                                     7
+#define     OUR_USB_ADDRESS                                     0
+	u32		ourconfig;
+} __attribute__ ((packed));
+
+/* pci control, BAR0 + 0x0100 */
+struct net2280_pci_regs {
+	// offset 0x0100
+	u32		 pcimstctl;
+#define     PCI_ARBITER_PARK_SELECT                             13
+#define     PCI_MULTI LEVEL_ARBITER                             12
+#define     PCI_RETRY_ABORT_ENABLE                              11
+#define     DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE              10
+#define     DMA_READ_MULTIPLE_ENABLE                            9
+#define     DMA_READ_LINE_ENABLE                                8
+#define     PCI_MASTER_COMMAND_SELECT                           6
+#define         MEM_READ_OR_WRITE                                   0
+#define         IO_READ_OR_WRITE                                    1
+#define         CFG_READ_OR_WRITE                                   2
+#define     PCI_MASTER_START                                    5
+#define     PCI_MASTER_READ_WRITE                               4
+#define         PCI_MASTER_WRITE                                    0
+#define         PCI_MASTER_READ                                     1
+#define     PCI_MASTER_BYTE_WRITE_ENABLES                       0
+	u32		 pcimstaddr;
+	u32		 pcimstdata;
+	u32		 pcimststat;
+#define     PCI_ARBITER_CLEAR                                   2
+#define     PCI_EXTERNAL_ARBITER                                1
+#define     PCI_HOST_MODE                                       0
+} __attribute__ ((packed));
+
+/* dma control, BAR0 + 0x0180 ... array of four structs like this,
+ * for channels 0..3.  see also struct net2280_dma:  descriptor
+ * that can be loaded into some of these registers.
+ */
+struct net2280_dma_regs {	/* [11.7] */
+	// offset 0x0180, 0x01a0, 0x01c0, 0x01e0, 
+	u32		dmactl;
+#define     DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE            25
+#define     DMA_CLEAR_COUNT_ENABLE                              21
+#define     DESCRIPTOR_POLLING_RATE                             19
+#define         POLL_CONTINUOUS                                     0
+#define         POLL_1_USEC                                         1
+#define         POLL_100_USEC                                       2
+#define         POLL_1_MSEC                                         3
+#define     DMA_VALID_BIT_POLLING_ENABLE                        18
+#define     DMA_VALID_BIT_ENABLE                                17
+#define     DMA_SCATTER_GATHER_ENABLE                           16
+#define     DMA_OUT_AUTO_START_ENABLE                           4
+#define     DMA_PREEMPT_ENABLE                                  3
+#define     DMA_FIFO_VALIDATE                                   2
+#define     DMA_ENABLE                                          1
+#define     DMA_ADDRESS_HOLD                                    0
+	u32		dmastat;
+#define     DMA_SCATTER_GATHER_DONE_INTERRUPT                   25
+#define     DMA_TRANSACTION_DONE_INTERRUPT                      24
+#define     DMA_ABORT                                           1
+#define     DMA_START                                           0
+	u32		_unused0 [2];
+	// offset 0x0190, 0x01b0, 0x01d0, 0x01f0, 
+	u32		dmacount;
+#define     VALID_BIT                                           31
+#define     DMA_DIRECTION                                       30
+#define     DMA_DONE_INTERRUPT_ENABLE                           29
+#define     END_OF_CHAIN                                        28
+#define         DMA_BYTE_COUNT_MASK                                 ((1<<24)-1)
+#define     DMA_BYTE_COUNT                                      0
+	u32		dmaaddr;
+	u32		dmadesc;
+	u32		_unused1;
+} __attribute__ ((packed));
+
+/* dedicated endpoint registers, BAR0 + 0x0200 */
+
+struct net2280_dep_regs {	/* [11.8] */
+	// offset 0x0200, 0x0210, 0x220, 0x230, 0x240
+	u32		dep_cfg;
+	// offset 0x0204, 0x0214, 0x224, 0x234, 0x244
+	u32		dep_rsp;
+	u32		_unused [2];
+} __attribute__ ((packed));
+
+/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
+ * like this, for ep0 then the configurable endpoints A..F
+ * ep0 reserved for control; E and F have only 64 bytes of fifo
+ */
+struct net2280_ep_regs {	/* [11.9] */
+	// offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0
+	u32		ep_cfg;
+#define     ENDPOINT_BYTE_COUNT                                 16
+#define     ENDPOINT_ENABLE                                     10
+#define     ENDPOINT_TYPE                                       8
+#define     ENDPOINT_DIRECTION                                  7
+#define     ENDPOINT_NUMBER                                     0
+	u32		ep_rsp;
+#define     SET_NAK_OUT_PACKETS                                 15
+#define     SET_EP_HIDE_STATUS_PHASE                            14
+#define     SET_EP_FORCE_CRC_ERROR                              13
+#define     SET_INTERRUPT_MODE                                  12
+#define     SET_CONTROL_STATUS_PHASE_HANDSHAKE                  11
+#define     SET_NAK_OUT_PACKETS_MODE                            10
+#define     SET_ENDPOINT_TOGGLE                                 9
+#define     SET_ENDPOINT_HALT                                   8
+#define     CLEAR_NAK_OUT_PACKETS                               7
+#define     CLEAR_EP_HIDE_STATUS_PHASE                          6
+#define     CLEAR_EP_FORCE_CRC_ERROR                            5
+#define     CLEAR_INTERRUPT_MODE                                4
+#define     CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE                3
+#define     CLEAR_NAK_OUT_PACKETS_MODE                          2
+#define     CLEAR_ENDPOINT_TOGGLE                               1
+#define     CLEAR_ENDPOINT_HALT                                 0
+	u32		ep_irqenb;
+#define     SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE              6
+#define     SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE           5
+#define     DATA_PACKET_RECEIVED_INTERRUPT_ENABLE               3
+#define     DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE            2
+#define     DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE                1
+#define     DATA_IN_TOKEN_INTERRUPT_ENABLE                      0
+	u32		ep_stat;
+#define     FIFO_VALID_COUNT                                    24
+#define     HIGH_BANDWIDTH_OUT_TRANSACTION_PID                  22
+#define     TIMEOUT                                             21
+#define     USB_STALL_SENT                                      20
+#define     USB_IN_NAK_SENT                                     19
+#define     USB_IN_ACK_RCVD                                     18
+#define     USB_OUT_PING_NAK_SENT                               17
+#define     USB_OUT_ACK_SENT                                    16
+#define     FIFO_OVERFLOW                                       13
+#define     FIFO_UNDERFLOW                                      12
+#define     FIFO_FULL                                           11
+#define     FIFO_EMPTY                                          10
+#define     FIFO_FLUSH                                          9
+#define     SHORT_PACKET_OUT_DONE_INTERRUPT                     6
+#define     SHORT_PACKET_TRANSFERRED_INTERRUPT                  5
+#define     NAK_OUT_PACKETS                                     4
+#define     DATA_PACKET_RECEIVED_INTERRUPT                      3
+#define     DATA_PACKET_TRANSMITTED_INTERRUPT                   2
+#define     DATA_OUT_PING_TOKEN_INTERRUPT                       1
+#define     DATA_IN_TOKEN_INTERRUPT                             0
+	// offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0
+	u32		ep_avail;
+	u32		ep_data;
+	u32		_unused0 [2];
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	__KERNEL__
+
+/* indexed registers [11.10] are accessed indirectly
+ * caller must own the device lock.
+ */
+
+static inline u32
+get_idx_reg (struct net2280_regs __iomem *regs, u32 index)
+{
+	writel (index, &regs->idxaddr);
+	/* NOTE:  synchs device/cpu memory views */
+	return readl (&regs->idxdata);
+}
+
+static inline void
+set_idx_reg (struct net2280_regs __iomem *regs, u32 index, u32 value)
+{
+	writel (index, &regs->idxaddr);
+	writel (value, &regs->idxdata);
+	/* posted, may not be visible yet */
+}
+
+#endif	/* __KERNEL__ */
+
+
+#define REG_DIAG		0x0
+#define     RETRY_COUNTER                                       16
+#define     FORCE_PCI_SERR                                      11
+#define     FORCE_PCI_INTERRUPT                                 10
+#define     FORCE_USB_INTERRUPT                                 9
+#define     FORCE_CPU_INTERRUPT                                 8
+#define     ILLEGAL_BYTE_ENABLES                                5
+#define     FAST_TIMES                                          4
+#define     FORCE_RECEIVE_ERROR                                 2
+#define     FORCE_TRANSMIT_CRC_ERROR                            0
+#define REG_FRAME		0x02	/* from last sof */
+#define REG_CHIPREV		0x03	/* in bcd */
+#define	REG_HS_NAK_RATE		0x0a	/* NAK per N uframes */
+
+#define	CHIPREV_1	0x0100
+#define	CHIPREV_1A	0x0110
+
+#ifdef	__KERNEL__
+
+/* ep a-f highspeed and fullspeed maxpacket, addresses
+ * computed from ep->num
+ */
+#define REG_EP_MAXPKT(dev,num) (((num) + 1) * 0x10 + \
+		(((dev)->gadget.speed == USB_SPEED_HIGH) ? 0 : 1))
+
+/*-------------------------------------------------------------------------*/
+
+/* [8.3] for scatter/gather i/o
+ * use struct net2280_dma_regs bitfields
+ */
+struct net2280_dma {
+	__le32		dmacount;
+	__le32		dmaaddr;		/* the buffer */
+	__le32		dmadesc;		/* next dma descriptor */
+	__le32		_reserved;
+} __attribute__ ((aligned (16)));
+
+/*-------------------------------------------------------------------------*/
+
+/* DRIVER DATA STRUCTURES and UTILITIES */
+
+struct net2280_ep {
+	struct usb_ep				ep;
+	struct net2280_ep_regs			__iomem *regs;
+	struct net2280_dma_regs			__iomem *dma;
+	struct net2280_dma			*dummy;
+	dma_addr_t				td_dma;	/* of dummy */
+	struct net2280				*dev;
+	unsigned long				irqs;
+
+	/* analogous to a host-side qh */
+	struct list_head			queue;
+	const struct usb_endpoint_descriptor	*desc;
+	unsigned				num : 8,
+						fifo_size : 12,
+						in_fifo_validate : 1,
+						out_overflow : 1,
+						stopped : 1,
+						is_in : 1,
+						is_iso : 1;
+};
+
+static inline void allow_status (struct net2280_ep *ep)
+{
+	/* ep0 only */
+	writel (  (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE)
+		| (1 << CLEAR_NAK_OUT_PACKETS)
+		| (1 << CLEAR_NAK_OUT_PACKETS_MODE)
+		, &ep->regs->ep_rsp);
+	ep->stopped = 1;
+}
+
+/* count (<= 4) bytes in the next fifo write will be valid */
+static inline void set_fifo_bytecount (struct net2280_ep *ep, unsigned count)
+{
+	writeb (count, 2 + (u8 __iomem *) &ep->regs->ep_cfg);
+}
+
+struct net2280_request {
+	struct usb_request		req;
+	struct net2280_dma		*td;
+	dma_addr_t			td_dma;
+	struct list_head		queue;
+	unsigned			mapped : 1,
+					valid : 1;
+};
+
+struct net2280 {
+	/* each pci device provides one gadget, several endpoints */
+	struct usb_gadget		gadget;
+	spinlock_t			lock;
+	struct net2280_ep		ep [7];
+	struct usb_gadget_driver 	*driver;
+	unsigned			enabled : 1,
+					protocol_stall : 1,
+					softconnect : 1,
+					got_irq : 1,
+					region : 1;
+	u16				chiprev;
+
+	/* pci state used to access those endpoints */
+	struct pci_dev			*pdev;
+	struct net2280_regs		__iomem *regs;
+	struct net2280_usb_regs		__iomem *usb;
+	struct net2280_pci_regs		__iomem *pci;
+	struct net2280_dma_regs		__iomem *dma;
+	struct net2280_dep_regs		__iomem *dep;
+	struct net2280_ep_regs		__iomem *epregs;
+
+	struct pci_pool			*requests;
+	// statistics...
+};
+
+static inline void set_halt (struct net2280_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	writel (  (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE)
+		    /* set NAK_OUT for erratum 0114 */
+		| ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS)
+		| (1 << SET_ENDPOINT_HALT)
+		, &ep->regs->ep_rsp);
+}
+
+static inline void clear_halt (struct net2280_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	writel (  (1 << CLEAR_ENDPOINT_HALT)
+		| (1 << CLEAR_ENDPOINT_TOGGLE)
+		    /* unless the gadget driver left a short packet in the
+		     * fifo, this reverses the erratum 0114 workaround.
+		     */
+		| ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS)
+		, &ep->regs->ep_rsp);
+}
+
+#ifdef USE_RDK_LEDS
+
+static inline void net2280_led_init (struct net2280 *dev)
+{
+	/* LED3 (green) is on during USB activity. note erratum 0113. */
+	writel ((1 << GPIO3_LED_SELECT)
+		| (1 << GPIO3_OUTPUT_ENABLE)
+		| (1 << GPIO2_OUTPUT_ENABLE)
+		| (1 << GPIO1_OUTPUT_ENABLE)
+		| (1 << GPIO0_OUTPUT_ENABLE)
+		, &dev->regs->gpioctl);
+}
+
+/* indicate speed with bi-color LED 0/1 */
+static inline
+void net2280_led_speed (struct net2280 *dev, enum usb_device_speed speed)
+{
+	u32	val = readl (&dev->regs->gpioctl);
+	switch (speed) {
+	case USB_SPEED_HIGH:		/* green */
+		val &= ~(1 << GPIO0_DATA);
+		val |= (1 << GPIO1_DATA);
+		break;
+	case USB_SPEED_FULL:		/* red */
+		val &= ~(1 << GPIO1_DATA);
+		val |= (1 << GPIO0_DATA);
+		break;
+	default:			/* (off/black) */
+		val &= ~((1 << GPIO1_DATA) | (1 << GPIO0_DATA));
+		break;
+	}
+	writel (val, &dev->regs->gpioctl);
+}
+
+/* indicate power with LED 2 */
+static inline void net2280_led_active (struct net2280 *dev, int is_active)
+{
+	u32	val = readl (&dev->regs->gpioctl);
+
+	// FIXME this LED never seems to turn on.
+	if (is_active)
+		val |= GPIO2_DATA;
+	else
+		val &= ~GPIO2_DATA;
+	writel (val, &dev->regs->gpioctl);
+}
+static inline void net2280_led_shutdown (struct net2280 *dev)
+{
+	/* turn off all four GPIO*_DATA bits */
+	writel (readl (&dev->regs->gpioctl) & ~0x0f,
+			&dev->regs->gpioctl);
+}
+
+#else
+
+#define net2280_led_init(dev)		do { } while (0)
+#define net2280_led_speed(dev, speed)	do { } while (0)
+#define net2280_led_shutdown(dev)	do { } while (0)
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#define xprintk(dev,level,fmt,args...) \
+	printk(level "%s %s: " fmt , driver_name , \
+			pci_name(dev->pdev) , ## args)
+
+#ifdef DEBUG
+#undef DEBUG
+#define DEBUG(dev,fmt,args...) \
+	xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DEBUG(dev,fmt,args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDEBUG DEBUG
+#else
+#define VDEBUG(dev,fmt,args...) \
+	do { } while (0)
+#endif	/* VERBOSE */
+
+#define ERROR(dev,fmt,args...) \
+	xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARN(dev,fmt,args...) \
+	xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+	xprintk(dev , KERN_INFO , fmt , ## args)
+
+/*-------------------------------------------------------------------------*/
+
+static inline void start_out_naking (struct net2280_ep *ep)
+{
+	/* NOTE:  hardware races lurk here, and PING protocol issues */
+	writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+	/* synch with device */
+	readl (&ep->regs->ep_rsp);
+}
+
+#ifdef DEBUG
+static inline void assert_out_naking (struct net2280_ep *ep, const char *where)
+{
+	u32	tmp = readl (&ep->regs->ep_stat);
+
+	if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) {
+		DEBUG (ep->dev, "%s %s %08x !NAK\n",
+				ep->ep.name, where, tmp);
+		writel ((1 << SET_NAK_OUT_PACKETS),
+			&ep->regs->ep_rsp);
+	}
+}
+#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep,__FUNCTION__)
+#else
+#define ASSERT_OUT_NAKING(ep) do {} while (0)
+#endif
+
+static inline void stop_out_naking (struct net2280_ep *ep)
+{
+	u32	tmp;
+
+	tmp = readl (&ep->regs->ep_stat);
+	if ((tmp & (1 << NAK_OUT_PACKETS)) != 0)
+		writel ((1 << CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+}
+
+#endif	/* __KERNEL__ */