Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits)
  USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c
  xhci: Clean up 32-bit build warnings.
  USB: update documentation for usbmon
  usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops
  drivers/usb/class/cdc-acm.c: clear dangling pointer
  drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree
  drivers/usb/host/isp1760-if.c: introduce missing kfree
  usb: option: add ZD Incorporated HSPA modem
  usb: ch9: fix up MaxStreams helper
  USB: usb-skeleton.c: cleanup open_count
  USB: usb-skeleton.c: fix open/disconnect race
  xhci: Properly handle COMP_2ND_BW_ERR
  USB: remove dead code from suspend/resume path
  USB: add quirk for another camera
  drivers: usb: wusbcore: Fix dependency for USB_WUSB
  xhci: Better debugging for critical host errors.
  xhci: Be less verbose during URB cancellation.
  xhci: Remove debugging about ring structure allocation.
  xhci: Remove debugging about toggling cycle bits.
  xhci: Remove debugging for individual transfers.
  ...

37 files changed, 441 insertions, 472 deletions

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 12a401a144b7..7ecb68a67411 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -15,6 +15,7 @@
 
 menuconfig USB_GADGET
 	tristate "USB Gadget Support"
+	select NLS
 	help
 	   USB is a master/slave protocol, organized with one master
 	   host (such as a PC) controlling up to 127 peripheral devices.
@@ -124,7 +125,6 @@ config USB_GADGET_STORAGE_NUM_BUFFERS
 #
 choice
 	prompt "USB Peripheral Controller"
-	depends on USB_GADGET
 	help
 	   A USB device uses a controller to talk to its host.
 	   Systems should have only one such upstream link.
@@ -234,7 +234,6 @@ config USB_R8A66597
 
 config USB_RENESAS_USBHS_UDC
 	tristate 'Renesas USBHS controller'
-	depends on SUPERH || ARCH_SHMOBILE
 	depends on USB_RENESAS_USBHS
 	select USB_GADGET_DUALSPEED
 	help
@@ -309,25 +308,13 @@ config USB_S3C_HSUDC
 
 	  This driver has been tested on S3C2416 and S3C2450 processors.
 
-config USB_PXA_U2O
-	tristate "PXA9xx Processor USB2.0 controller"
-	depends on ARCH_MMP
+config USB_MV_UDC
+	tristate "Marvell USB2.0 Device Controller"
 	select USB_GADGET_DUALSPEED
 	help
-	  PXA9xx Processor series include a high speed USB2.0 device
-	  controller, which support high speed and full speed USB peripheral.
-
-config USB_GADGET_DWC3
-	tristate "DesignWare USB3.0 (DRD) Controller"
-	depends on USB_DWC3
-	select USB_GADGET_DUALSPEED
-	select USB_GADGET_SUPERSPEED
-	help
-	  DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller
-	  which can be configured for peripheral-only, host-only, hub-only
-	  and Dual-Role operation. This Controller was first integrated into
-	  the OMAP5 series of processors. More information about the OMAP5
-	  version of this controller, refer to http://www.ti.com/omap5.
+	  Marvell Socs (including PXA and MMP series) include a high speed
+	  USB2.0 OTG controller, which can be configured as high speed or
+	  full speed USB peripheral.
 
 #
 # Controllers available in both integrated and discrete versions
@@ -543,12 +530,10 @@ endchoice
 # Selected by UDC drivers that support high-speed operation.
 config USB_GADGET_DUALSPEED
 	bool
-	depends on USB_GADGET
 
 # Selected by UDC drivers that support super-speed opperation
 config USB_GADGET_SUPERSPEED
 	bool
-	depends on USB_GADGET
 	depends on USB_GADGET_DUALSPEED
 
 #
@@ -556,7 +541,6 @@ config USB_GADGET_SUPERSPEED
 #
 choice
 	tristate "USB Gadget Drivers"
-	depends on USB_GADGET
 	default USB_ETH
 	help
 	  A Linux "Gadget Driver" talks to the USB Peripheral Controller
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index b54ac6190890..b7f6eefc3927 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_USB_S3C_HSOTG)	+= s3c-hsotg.o
 obj-$(CONFIG_USB_S3C_HSUDC)	+= s3c-hsudc.o
 obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
 obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
-obj-$(CONFIG_USB_PXA_U2O)	+= mv_udc.o
+obj-$(CONFIG_USB_MV_UDC)	+= mv_udc.o
 mv_udc-y			:= mv_udc_core.o
 obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 45f422ac103f..e9a2c5c44454 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1959,7 +1959,7 @@ static int amd5536_start(struct usb_gadget_driver *driver,
 	u32 tmp;
 
 	if (!driver || !bind || !driver->setup
-			|| driver->speed < USB_SPEED_HIGH)
+			|| driver->max_speed < USB_SPEED_HIGH)
 		return -EINVAL;
 	if (!dev)
 		return -ENODEV;
@@ -3349,7 +3349,7 @@ static int udc_probe(struct udc *dev)
 	dev_set_name(&dev->gadget.dev, "gadget");
 	dev->gadget.dev.release = gadget_release;
 	dev->gadget.name = name;
-	dev->gadget.is_dualspeed = 1;
+	dev->gadget.max_speed = USB_SPEED_HIGH;
 
 	/* init registers, interrupts, ... */
 	startup_registers(dev);
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 8efe0fa9228d..ac41f71bf9ca 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1633,7 +1633,7 @@ static int at91_start(struct usb_gadget_driver *driver,
 	unsigned long	flags;
 
 	if (!driver
-			|| driver->speed < USB_SPEED_FULL
+			|| driver->max_speed < USB_SPEED_FULL
 			|| !bind
 			|| !driver->setup) {
 		DBG("bad parameter.\n");
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 271a9d873608..e2fb6d583bd9 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1038,7 +1038,7 @@ static struct usba_udc the_udc = {
 	.gadget	= {
 		.ops		= &usba_udc_ops,
 		.ep_list	= LIST_HEAD_INIT(the_udc.gadget.ep_list),
-		.is_dualspeed	= 1,
+		.max_speed	= USB_SPEED_HIGH,
 		.name		= "atmel_usba_udc",
 		.dev	= {
 			.init_name	= "gadget",
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 9a0c3979ff43..27e313718422 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -182,6 +182,16 @@ static inline int hw_ep_bit(int num, int dir)
 	return num + (dir ? 16 : 0);
 }
 
+static int ep_to_bit(int n)
+{
+	int fill = 16 - hw_ep_max / 2;
+
+	if (n >= hw_ep_max / 2)
+		n += fill;
+
+	return n;
+}
+
 /**
  * hw_aread: reads from register bitfield
  * @addr: address relative to bus map
@@ -440,12 +450,13 @@ static int hw_ep_get_halt(int num, int dir)
 /**
  * hw_test_and_clear_setup_status: test & clear setup status (execute without
  *                                 interruption)
- * @n: bit number (endpoint)
+ * @n: endpoint number
  *
  * This function returns setup status
  */
 static int hw_test_and_clear_setup_status(int n)
 {
+	n = ep_to_bit(n);
 	return hw_ctest_and_clear(CAP_ENDPTSETUPSTAT, BIT(n));
 }
 
@@ -641,12 +652,13 @@ static int hw_register_write(u16 addr, u32 data)
 /**
  * hw_test_and_clear_complete: test & clear complete status (execute without
  *                             interruption)
- * @n: bit number (endpoint)
+ * @n: endpoint number
  *
  * This function returns complete status
  */
 static int hw_test_and_clear_complete(int n)
 {
+	n = ep_to_bit(n);
 	return hw_ctest_and_clear(CAP_ENDPTCOMPLETE, BIT(n));
 }
 
@@ -754,8 +766,11 @@ static ssize_t show_device(struct device *dev, struct device_attribute *attr,
 
 	n += scnprintf(buf + n, PAGE_SIZE - n, "speed             = %d\n",
 		       gadget->speed);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "max_speed         = %d\n",
+		       gadget->max_speed);
+	/* TODO: Scheduled for removal in 3.8. */
 	n += scnprintf(buf + n, PAGE_SIZE - n, "is_dualspeed      = %d\n",
-		       gadget->is_dualspeed);
+		       gadget_is_dualspeed(gadget));
 	n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg            = %d\n",
 		       gadget->is_otg);
 	n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral   = %d\n",
@@ -798,7 +813,7 @@ static ssize_t show_driver(struct device *dev, struct device_attribute *attr,
 	n += scnprintf(buf + n, PAGE_SIZE - n, "function  = %s\n",
 		       (driver->function ? driver->function : ""));
 	n += scnprintf(buf + n, PAGE_SIZE - n, "max speed = %d\n",
-		       driver->speed);
+		       driver->max_speed);
 
 	return n;
 }
@@ -2563,9 +2578,7 @@ static int ci13xxx_start(struct usb_gadget_driver *driver,
 	if (driver             == NULL ||
 	    bind               == NULL ||
 	    driver->setup      == NULL ||
-	    driver->disconnect == NULL ||
-	    driver->suspend    == NULL ||
-	    driver->resume     == NULL)
+	    driver->disconnect == NULL)
 		return -EINVAL;
 	else if (udc         == NULL)
 		return -ENODEV;
@@ -2693,8 +2706,6 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver)
 	    driver->unbind     == NULL ||
 	    driver->setup      == NULL ||
 	    driver->disconnect == NULL ||
-	    driver->suspend    == NULL ||
-	    driver->resume     == NULL ||
 	    driver             != udc->driver)
 		return -EINVAL;
 
@@ -2793,7 +2804,7 @@ static irqreturn_t udc_irq(void)
 			isr_statistics.pci++;
 			udc->gadget.speed = hw_port_is_high_speed() ?
 				USB_SPEED_HIGH : USB_SPEED_FULL;
-			if (udc->suspended) {
+			if (udc->suspended && udc->driver->resume) {
 				spin_unlock(udc->lock);
 				udc->driver->resume(&udc->gadget);
 				spin_lock(udc->lock);
@@ -2807,7 +2818,8 @@ static irqreturn_t udc_irq(void)
 			isr_tr_complete_handler(udc);
 		}
 		if (USBi_SLI & intr) {
-			if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+			if (udc->gadget.speed != USB_SPEED_UNKNOWN &&
+			    udc->driver->suspend) {
 				udc->suspended = 1;
 				spin_unlock(udc->lock);
 				udc->driver->suspend(&udc->gadget);
@@ -2871,7 +2883,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
 
 	udc->gadget.ops          = &usb_gadget_ops;
 	udc->gadget.speed        = USB_SPEED_UNKNOWN;
-	udc->gadget.is_dualspeed = 1;
+	udc->gadget.max_speed    = USB_SPEED_HIGH;
 	udc->gadget.is_otg       = 0;
 	udc->gadget.name         = driver->name;
 
diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h
index 23707775cb43..f4871e1fac59 100644
--- a/drivers/usb/gadget/ci13xxx_udc.h
+++ b/drivers/usb/gadget/ci13xxx_udc.h
@@ -127,7 +127,7 @@ struct ci13xxx {
 	struct ci13xxx_ep          ci13xxx_ep[ENDPT_MAX]; /* extended endpts */
 	u32                        ep0_dir;    /* ep0 direction */
 #define ep0out ci13xxx_ep[0]
-#define ep0in  ci13xxx_ep[16]
+#define ep0in  ci13xxx_ep[hw_ep_max / 2]
 	u8                         remote_wakeup; /* Is remote wakeup feature
 							enabled by the host? */
 	u8                         suspended;  /* suspended by the host */
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index f71b0787983f..a95de6a4a134 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1535,9 +1535,9 @@ composite_resume(struct usb_gadget *gadget)
 
 static struct usb_gadget_driver composite_driver = {
 #ifdef CONFIG_USB_GADGET_SUPERSPEED
-	.speed		= USB_SPEED_SUPER,
+	.max_speed	= USB_SPEED_SUPER,
 #else
-	.speed		= USB_SPEED_HIGH,
+	.max_speed	= USB_SPEED_HIGH,
 #endif
 
 	.unbind		= composite_unbind,
@@ -1584,8 +1584,8 @@ int usb_composite_probe(struct usb_composite_driver *driver,
 		driver->iProduct = driver->name;
 	composite_driver.function =  (char *) driver->name;
 	composite_driver.driver.name = driver->name;
-	composite_driver.speed = min((u8)composite_driver.speed,
-				     (u8)driver->max_speed);
+	composite_driver.max_speed =
+		min_t(u8, composite_driver.max_speed, driver->max_speed);
 	composite = driver;
 	composite_gadget_bind = bind;
 
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
index 6256420089f3..19d7bb0df75a 100644
--- a/drivers/usb/gadget/dbgp.c
+++ b/drivers/usb/gadget/dbgp.c
@@ -404,7 +404,7 @@ fail:
 
 static struct usb_gadget_driver dbgp_driver = {
 	.function = "dbgp",
-	.speed = USB_SPEED_HIGH,
+	.max_speed = USB_SPEED_HIGH,
 	.unbind = dbgp_unbind,
 	.setup = dbgp_setup,
 	.disconnect = dbgp_disconnect,
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index ab8f1b488d54..db815c2da7ed 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -823,19 +823,18 @@ static int dummy_pullup (struct usb_gadget *_gadget, int value)
 
 	if (value && dum->driver) {
 		if (mod_data.is_super_speed)
-			dum->gadget.speed = dum->driver->speed;
+			dum->gadget.speed = dum->driver->max_speed;
 		else if (mod_data.is_high_speed)
 			dum->gadget.speed = min_t(u8, USB_SPEED_HIGH,
-					dum->driver->speed);
+					dum->driver->max_speed);
 		else
 			dum->gadget.speed = USB_SPEED_FULL;
 		dummy_udc_udpate_ep0(dum);
 
-		if (dum->gadget.speed < dum->driver->speed)
+		if (dum->gadget.speed < dum->driver->max_speed)
 			dev_dbg(udc_dev(dum), "This device can perform faster"
-					" if you connect it to a %s port...\n",
-					(dum->driver->speed == USB_SPEED_SUPER ?
-					 "SuperSpeed" : "HighSpeed"));
+				" if you connect it to a %s port...\n",
+				usb_speed_string(dum->driver->max_speed));
 	}
 	dum_hcd = gadget_to_dummy_hcd(_gadget);
 
@@ -898,7 +897,7 @@ static int dummy_udc_start(struct usb_gadget *g,
 	struct dummy_hcd	*dum_hcd = gadget_to_dummy_hcd(g);
 	struct dummy		*dum = dum_hcd->dum;
 
-	if (driver->speed == USB_SPEED_UNKNOWN)
+	if (driver->max_speed == USB_SPEED_UNKNOWN)
 		return -EINVAL;
 
 	/*
@@ -977,7 +976,7 @@ static int dummy_udc_probe (struct platform_device *pdev)
 
 	dum->gadget.name = gadget_name;
 	dum->gadget.ops = &dummy_ops;
-	dum->gadget.is_dualspeed = 1;
+	dum->gadget.max_speed = USB_SPEED_SUPER;
 
 	dev_set_name(&dum->gadget.dev, "gadget");
 	dum->gadget.dev.parent = &pdev->dev;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 4dff83d2f265..753aa0683ac1 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -149,7 +149,7 @@ ep_matches (
 	switch (type) {
 	case USB_ENDPOINT_XFER_INT:
 		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
-		if (!gadget->is_dualspeed && max > 64)
+		if (!gadget_is_dualspeed(gadget) && max > 64)
 			return 0;
 		/* FALLTHROUGH */
 
@@ -157,12 +157,12 @@ ep_matches (
 		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
 		if (ep->maxpacket < max)
 			return 0;
-		if (!gadget->is_dualspeed && max > 1023)
+		if (!gadget_is_dualspeed(gadget) && max > 1023)
 			return 0;
 
 		/* BOTH:  "high bandwidth" works only at high speed */
 		if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
-			if (!gadget->is_dualspeed)
+			if (!gadget_is_dualspeed(gadget))
 				return 0;
 			/* configure your hardware with enough buffering!! */
 		}
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index b5f6f9fef9c7..f63dc6c150d2 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1399,7 +1399,7 @@ static int ffs_epfiles_create(struct ffs_data *ffs)
 	ENTER();
 
 	count = ffs->eps_count;
-	epfiles = kzalloc(count * sizeof *epfiles, GFP_KERNEL);
+	epfiles = kcalloc(count, sizeof(*epfiles), GFP_KERNEL);
 	if (!epfiles)
 		return -ENOMEM;
 
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 1a6f415c0d02..6353eca1e852 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -1873,17 +1873,14 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 		    common->lun, lun);
 
 	/* Check the LUN */
-	if (common->lun < common->nluns) {
-		curlun = &common->luns[common->lun];
-		common->curlun = curlun;
+	curlun = common->curlun;
+	if (curlun) {
 		if (common->cmnd[0] != REQUEST_SENSE) {
 			curlun->sense_data = SS_NO_SENSE;
 			curlun->sense_data_info = 0;
 			curlun->info_valid = 0;
 		}
 	} else {
-		common->curlun = NULL;
-		curlun = NULL;
 		common->bad_lun_okay = 0;
 
 		/*
@@ -1929,6 +1926,17 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 	return 0;
 }
 
+/* wrapper of check_command for data size in blocks handling */
+static int check_command_size_in_blocks(struct fsg_common *common,
+		int cmnd_size, enum data_direction data_dir,
+		unsigned int mask, int needs_medium, const char *name)
+{
+	if (common->curlun)
+		common->data_size_from_cmnd <<= common->curlun->blkbits;
+	return check_command(common, cmnd_size, data_dir,
+			mask, needs_medium, name);
+}
+
 static int do_scsi_command(struct fsg_common *common)
 {
 	struct fsg_buffhd	*bh;
@@ -2011,9 +2019,9 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case READ_6:
 		i = common->cmnd[4];
-		common->data_size_from_cmnd = (i == 0 ? 256 : i) <<
-				common->curlun->blkbits;
-		reply = check_command(common, 6, DATA_DIR_TO_HOST,
+		common->data_size_from_cmnd = (i == 0) ? 256 : i;
+		reply = check_command_size_in_blocks(common, 6,
+				      DATA_DIR_TO_HOST,
 				      (7<<1) | (1<<4), 1,
 				      "READ(6)");
 		if (reply == 0)
@@ -2022,9 +2030,9 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case READ_10:
 		common->data_size_from_cmnd =
-				get_unaligned_be16(&common->cmnd[7]) <<
-						common->curlun->blkbits;
-		reply = check_command(common, 10, DATA_DIR_TO_HOST,
+				get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command_size_in_blocks(common, 10,
+				      DATA_DIR_TO_HOST,
 				      (1<<1) | (0xf<<2) | (3<<7), 1,
 				      "READ(10)");
 		if (reply == 0)
@@ -2033,9 +2041,9 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case READ_12:
 		common->data_size_from_cmnd =
-				get_unaligned_be32(&common->cmnd[6]) <<
-						common->curlun->blkbits;
-		reply = check_command(common, 12, DATA_DIR_TO_HOST,
+				get_unaligned_be32(&common->cmnd[6]);
+		reply = check_command_size_in_blocks(common, 12,
+				      DATA_DIR_TO_HOST,
 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
 				      "READ(12)");
 		if (reply == 0)
@@ -2134,9 +2142,9 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case WRITE_6:
 		i = common->cmnd[4];
-		common->data_size_from_cmnd = (i == 0 ? 256 : i) <<
-					common->curlun->blkbits;
-		reply = check_command(common, 6, DATA_DIR_FROM_HOST,
+		common->data_size_from_cmnd = (i == 0) ? 256 : i;
+		reply = check_command_size_in_blocks(common, 6,
+				      DATA_DIR_FROM_HOST,
 				      (7<<1) | (1<<4), 1,
 				      "WRITE(6)");
 		if (reply == 0)
@@ -2145,9 +2153,9 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case WRITE_10:
 		common->data_size_from_cmnd =
-				get_unaligned_be16(&common->cmnd[7]) <<
-						common->curlun->blkbits;
-		reply = check_command(common, 10, DATA_DIR_FROM_HOST,
+				get_unaligned_be16(&common->cmnd[7]);
+		reply = check_command_size_in_blocks(common, 10,
+				      DATA_DIR_FROM_HOST,
 				      (1<<1) | (0xf<<2) | (3<<7), 1,
 				      "WRITE(10)");
 		if (reply == 0)
@@ -2156,9 +2164,9 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case WRITE_12:
 		common->data_size_from_cmnd =
-				get_unaligned_be32(&common->cmnd[6]) <<
-						common->curlun->blkbits;
-		reply = check_command(common, 12, DATA_DIR_FROM_HOST,
+				get_unaligned_be32(&common->cmnd[6]);
+		reply = check_command_size_in_blocks(common, 12,
+				      DATA_DIR_FROM_HOST,
 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
 				      "WRITE(12)");
 		if (reply == 0)
@@ -2273,6 +2281,10 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 	if (common->data_size == 0)
 		common->data_dir = DATA_DIR_NONE;
 	common->lun = cbw->Lun;
+	if (common->lun >= 0 && common->lun < common->nluns)
+		common->curlun = &common->luns[common->lun];
+	else
+		common->curlun = NULL;
 	common->tag = cbw->Tag;
 	return 0;
 }
@@ -2763,7 +2775,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 	 * Create the LUNs, open their backing files, and register the
 	 * LUN devices in sysfs.
 	 */
-	curlun = kzalloc(nluns * sizeof *curlun, GFP_KERNEL);
+	curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL);
 	if (unlikely(!curlun)) {
 		rc = -ENOMEM;
 		goto error_release;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 11b5196284ae..e0f30fc70e45 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2297,19 +2297,17 @@ static int check_command(struct fsg_dev *fsg, int cmnd_size,
 			DBG(fsg, "using LUN %d from CBW, "
 					"not LUN %d from CDB\n",
 					fsg->lun, lun);
-	} else
-		fsg->lun = lun;		// Use LUN from the command
+	}
 
 	/* Check the LUN */
-	if (fsg->lun < fsg->nluns) {
-		fsg->curlun = curlun = &fsg->luns[fsg->lun];
+	curlun = fsg->curlun;
+	if (curlun) {
 		if (fsg->cmnd[0] != REQUEST_SENSE) {
 			curlun->sense_data = SS_NO_SENSE;
 			curlun->sense_data_info = 0;
 			curlun->info_valid = 0;
 		}
 	} else {
-		fsg->curlun = curlun = NULL;
 		fsg->bad_lun_okay = 0;
 
 		/* INQUIRY and REQUEST SENSE commands are explicitly allowed
@@ -2351,6 +2349,16 @@ static int check_command(struct fsg_dev *fsg, int cmnd_size,
 	return 0;
 }
 
+/* wrapper of check_command for data size in blocks handling */
+static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size,
+		enum data_direction data_dir, unsigned int mask,
+		int needs_medium, const char *name)
+{
+	if (fsg->curlun)
+		fsg->data_size_from_cmnd <<= fsg->curlun->blkbits;
+	return check_command(fsg, cmnd_size, data_dir,
+			mask, needs_medium, name);
+}
 
 static int do_scsi_command(struct fsg_dev *fsg)
 {
@@ -2425,26 +2433,27 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case READ_6:
 		i = fsg->cmnd[4];
-		fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits;
-		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+		fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
+		if ((reply = check_command_size_in_blocks(fsg, 6,
+				DATA_DIR_TO_HOST,
 				(7<<1) | (1<<4), 1,
 				"READ(6)")) == 0)
 			reply = do_read(fsg);
 		break;
 
 	case READ_10:
-		fsg->data_size_from_cmnd =
-				get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits;
-		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
+		if ((reply = check_command_size_in_blocks(fsg, 10,
+				DATA_DIR_TO_HOST,
 				(1<<1) | (0xf<<2) | (3<<7), 1,
 				"READ(10)")) == 0)
 			reply = do_read(fsg);
 		break;
 
 	case READ_12:
-		fsg->data_size_from_cmnd =
-				get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits;
-		if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
+		fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
+		if ((reply = check_command_size_in_blocks(fsg, 12,
+				DATA_DIR_TO_HOST,
 				(1<<1) | (0xf<<2) | (0xf<<6), 1,
 				"READ(12)")) == 0)
 			reply = do_read(fsg);
@@ -2529,26 +2538,27 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case WRITE_6:
 		i = fsg->cmnd[4];
-		fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits;
-		if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
+		fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
+		if ((reply = check_command_size_in_blocks(fsg, 6,
+				DATA_DIR_FROM_HOST,
 				(7<<1) | (1<<4), 1,
 				"WRITE(6)")) == 0)
 			reply = do_write(fsg);
 		break;
 
 	case WRITE_10:
-		fsg->data_size_from_cmnd =
-				get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits;
-		if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
+		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
+		if ((reply = check_command_size_in_blocks(fsg, 10,
+				DATA_DIR_FROM_HOST,
 				(1<<1) | (0xf<<2) | (3<<7), 1,
 				"WRITE(10)")) == 0)
 			reply = do_write(fsg);
 		break;
 
 	case WRITE_12:
-		fsg->data_size_from_cmnd =
-				get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits;
-		if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
+		fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
+		if ((reply = check_command_size_in_blocks(fsg, 12,
+				DATA_DIR_FROM_HOST,
 				(1<<1) | (0xf<<2) | (0xf<<6), 1,
 				"WRITE(12)")) == 0)
 			reply = do_write(fsg);
@@ -2715,7 +2725,17 @@ static int get_next_command(struct fsg_dev *fsg)
 		memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size);
 		fsg->cbbuf_cmnd_size = 0;
 		spin_unlock_irq(&fsg->lock);
+
+		/* Use LUN from the command */
+		fsg->lun = fsg->cmnd[1] >> 5;
 	}
+
+	/* Update current lun */
+	if (fsg->lun >= 0 && fsg->lun < fsg->nluns)
+		fsg->curlun = &fsg->luns[fsg->lun];
+	else
+		fsg->curlun = NULL;
+
 	return rc;
 }
 
@@ -3584,7 +3604,7 @@ static void fsg_resume(struct usb_gadget *gadget)
 /*-------------------------------------------------------------------------*/
 
 static struct usb_gadget_driver		fsg_driver = {
-	.speed		= USB_SPEED_SUPER,
+	.max_speed	= USB_SPEED_SUPER,
 	.function	= (char *) fsg_string_product,
 	.unbind		= fsg_unbind,
 	.disconnect	= fsg_disconnect,
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index e00cf92409ce..b95697c03d07 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2336,7 +2336,7 @@ static int fsl_qe_start(struct usb_gadget_driver *driver,
 	if (!udc_controller)
 		return -ENODEV;
 
-	if (!driver || driver->speed < USB_SPEED_FULL
+	if (!driver || driver->max_speed < USB_SPEED_FULL
 			|| !bind || !driver->disconnect || !driver->setup)
 		return -EINVAL;
 
@@ -2350,7 +2350,7 @@ static int fsl_qe_start(struct usb_gadget_driver *driver,
 	/* hook up the driver */
 	udc_controller->driver = driver;
 	udc_controller->gadget.dev.driver = &driver->driver;
-	udc_controller->gadget.speed = (enum usb_device_speed)(driver->speed);
+	udc_controller->gadget.speed = driver->max_speed;
 	spin_unlock_irqrestore(&udc_controller->lock, flags);
 
 	retval = bind(&udc_controller->gadget);
@@ -2814,20 +2814,7 @@ static struct platform_driver udc_driver = {
 #endif
 };
 
-static int __init qe_udc_init(void)
-{
-	printk(KERN_INFO "%s: %s, %s\n", driver_name, driver_desc,
-			DRIVER_VERSION);
-	return platform_driver_register(&udc_driver);
-}
-
-static void __exit qe_udc_exit(void)
-{
-	platform_driver_unregister(&udc_driver);
-}
-
-module_init(qe_udc_init);
-module_exit(qe_udc_exit);
+module_platform_driver(udc_driver);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index dd28ef3def71..d7ea6c076ce9 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1934,7 +1934,7 @@ static int fsl_start(struct usb_gadget_driver *driver,
 	if (!udc_controller)
 		return -ENODEV;
 
-	if (!driver || driver->speed < USB_SPEED_FULL
+	if (!driver || driver->max_speed < USB_SPEED_FULL
 			|| !bind || !driver->disconnect || !driver->setup)
 		return -EINVAL;
 
@@ -2525,7 +2525,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 
 	/* Setup gadget structure */
 	udc_controller->gadget.ops = &fsl_gadget_ops;
-	udc_controller->gadget.is_dualspeed = 1;
+	udc_controller->gadget.max_speed = USB_SPEED_HIGH;
 	udc_controller->gadget.ep0 = &udc_controller->eps[0].ep;
 	INIT_LIST_HEAD(&udc_controller->gadget.ep_list);
 	udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index 74da206c8406..5831cb4a0b35 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -1317,7 +1317,7 @@ static int fusb300_udc_start(struct usb_gadget_driver *driver,
 	int retval;
 
 	if (!driver
-			|| driver->speed < USB_SPEED_FULL
+			|| driver->max_speed < USB_SPEED_FULL
 			|| !bind
 			|| !driver->setup)
 		return -EINVAL;
@@ -1463,7 +1463,7 @@ static int __init fusb300_probe(struct platform_device *pdev)
 
 	dev_set_name(&fusb300->gadget.dev, "gadget");
 
-	fusb300->gadget.is_dualspeed = 1;
+	fusb300->gadget.max_speed = USB_SPEED_HIGH;
 	fusb300->gadget.dev.parent = &pdev->dev;
 	fusb300->gadget.dev.dma_mask = pdev->dev.dma_mask;
 	fusb300->gadget.dev.release = pdev->dev.release;
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 7f87805cddc4..5af70fcce139 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1357,7 +1357,7 @@ static int goku_start(struct usb_gadget_driver *driver,
 	int			retval;
 
 	if (!driver
-			|| driver->speed < USB_SPEED_FULL
+			|| driver->max_speed < USB_SPEED_FULL
 			|| !bind
 			|| !driver->disconnect
 			|| !driver->setup)
@@ -1796,6 +1796,7 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	spin_lock_init(&dev->lock);
 	dev->pdev = pdev;
 	dev->gadget.ops = &goku_ops;
+	dev->gadget.max_speed = USB_SPEED_FULL;
 
 	/* the "gadget" abstracts/virtualizes the controller */
 	dev_set_name(&dev->gadget.dev, "gadget");
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 2d978c0e7ced..8d1c75abd73d 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1336,7 +1336,7 @@ static int imx_udc_start(struct usb_gadget_driver *driver,
 	int retval;
 
 	if (!driver
-		|| driver->speed < USB_SPEED_FULL
+		|| driver->max_speed < USB_SPEED_FULL
 		|| !bind
 		|| !driver->disconnect
 		|| !driver->setup)
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 6b7ea25af0fe..ae04266dba1b 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1766,9 +1766,9 @@ gadgetfs_suspend (struct usb_gadget *gadget)
 
 static struct usb_gadget_driver gadgetfs_driver = {
 #ifdef	CONFIG_USB_GADGET_DUALSPEED
-	.speed		= USB_SPEED_HIGH,
+	.max_speed	= USB_SPEED_HIGH,
 #else
-	.speed		= USB_SPEED_FULL,
+	.max_speed	= USB_SPEED_FULL,
 #endif
 	.function	= (char *) driver_desc,
 	.unbind		= gadgetfs_unbind,
@@ -1792,7 +1792,7 @@ static int gadgetfs_probe (struct usb_gadget *gadget)
 }
 
 static struct usb_gadget_driver probe_driver = {
-	.speed		= USB_SPEED_HIGH,
+	.max_speed	= USB_SPEED_HIGH,
 	.unbind		= gadgetfs_nop,
 	.setup		= (void *)gadgetfs_nop,
 	.disconnect	= gadgetfs_nop,
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index c9fa3bf5b377..fa0fcc11263f 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -3267,7 +3267,7 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	dev->gadget.ep0 = &dev->ep[0].ep;	/* gadget ep0 */
 	INIT_LIST_HEAD(&dev->gadget.ep_list);	/* ep_list */
 	dev->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
-	dev->gadget.is_dualspeed = 1;		/* support dual speed */
+	dev->gadget.max_speed = USB_SPEED_HIGH;	/* support dual speed */
 #ifdef	OTG_TRANSCEIVER
 	dev->gadget.is_otg = 1;			/* support otg mode */
 #endif
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 9aa1cbbee45b..3608b3bd5732 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1472,7 +1472,7 @@ static int m66592_start(struct usb_gadget_driver *driver,
 	int retval;
 
 	if (!driver
-			|| driver->speed < USB_SPEED_HIGH
+			|| driver->max_speed < USB_SPEED_HIGH
 			|| !bind
 			|| !driver->setup)
 		return -EINVAL;
@@ -1653,7 +1653,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 	m66592->gadget.ops = &m66592_gadget_ops;
 	device_initialize(&m66592->gadget.dev);
 	dev_set_name(&m66592->gadget.dev, "gadget");
-	m66592->gadget.is_dualspeed = 1;
+	m66592->gadget.max_speed = USB_SPEED_HIGH;
 	m66592->gadget.dev.parent = &pdev->dev;
 	m66592->gadget.dev.dma_mask = pdev->dev.dma_mask;
 	m66592->gadget.dev.release = pdev->dev.release;
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
index daa75c12f336..34aadfae723d 100644
--- a/drivers/usb/gadget/mv_udc.h
+++ b/drivers/usb/gadget/mv_udc.h
@@ -180,7 +180,7 @@ struct mv_udc {
 
 	struct mv_cap_regs __iomem	*cap_regs;
 	struct mv_op_regs __iomem	*op_regs;
-	unsigned int			phy_regs;
+	void __iomem                    *phy_regs;
 	unsigned int			max_eps;
 	struct mv_dqh			*ep_dqh;
 	size_t				ep_dqh_size;
@@ -211,11 +211,14 @@ struct mv_udc {
 				softconnected:1,
 				force_fs:1,
 				clock_gating:1,
-				active:1;
+				active:1,
+				stopped:1;      /* stop bit is setted */
 
 	struct work_struct	vbus_work;
 	struct workqueue_struct *qwork;
 
+	struct otg_transceiver	*transceiver;
+
 	struct mv_usb_platform_data     *pdata;
 
 	/* some SOC has mutiple clock sources for USB*/
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 892412103dd8..f97e737d26f7 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -276,11 +276,12 @@ static void done(struct mv_ep *ep, struct mv_req *req, int status)
 
 static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 {
-	u32 tmp, epstatus, bit_pos, direction;
 	struct mv_udc *udc;
 	struct mv_dqh *dqh;
+	u32 bit_pos, direction;
+	u32 usbcmd, epstatus;
 	unsigned int loops;
-	int readsafe, retval = 0;
+	int retval = 0;
 
 	udc = ep->udc;
 	direction = ep_dir(ep);
@@ -293,30 +294,18 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 		lastreq = list_entry(ep->queue.prev, struct mv_req, queue);
 		lastreq->tail->dtd_next =
 			req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
-		if (readl(&udc->op_regs->epprime) & bit_pos) {
-			loops = LOOPS(PRIME_TIMEOUT);
-			while (readl(&udc->op_regs->epprime) & bit_pos) {
-				if (loops == 0) {
-					retval = -ETIME;
-					goto done;
-				}
-				udelay(LOOPS_USEC);
-				loops--;
-			}
-			if (readl(&udc->op_regs->epstatus) & bit_pos)
-				goto done;
-		}
-		readsafe = 0;
+
+		wmb();
+
+		if (readl(&udc->op_regs->epprime) & bit_pos)
+			goto done;
+
 		loops = LOOPS(READSAFE_TIMEOUT);
-		while (readsafe == 0) {
-			if (loops == 0) {
-				retval = -ETIME;
-				goto done;
-			}
+		while (1) {
 			/* start with setting the semaphores */
-			tmp = readl(&udc->op_regs->usbcmd);
-			tmp |= USBCMD_ATDTW_TRIPWIRE_SET;
-			writel(tmp, &udc->op_regs->usbcmd);
+			usbcmd = readl(&udc->op_regs->usbcmd);
+			usbcmd |= USBCMD_ATDTW_TRIPWIRE_SET;
+			writel(usbcmd, &udc->op_regs->usbcmd);
 
 			/* read the endpoint status */
 			epstatus = readl(&udc->op_regs->epstatus) & bit_pos;
@@ -329,98 +318,46 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 			 * primed.
 			 */
 			if (readl(&udc->op_regs->usbcmd)
-				& USBCMD_ATDTW_TRIPWIRE_SET) {
-				readsafe = 1;
-			}
+				& USBCMD_ATDTW_TRIPWIRE_SET)
+				break;
+
 			loops--;
+			if (loops == 0) {
+				dev_err(&udc->dev->dev,
+					"Timeout for ATDTW_TRIPWIRE...\n");
+				retval = -ETIME;
+				goto done;
+			}
 			udelay(LOOPS_USEC);
 		}
 
 		/* Clear the semaphore */
-		tmp = readl(&udc->op_regs->usbcmd);
-		tmp &= USBCMD_ATDTW_TRIPWIRE_CLEAR;
-		writel(tmp, &udc->op_regs->usbcmd);
-
-		/* If endpoint is not active, we activate it now. */
-		if (!epstatus) {
-			if (direction == EP_DIR_IN) {
-				struct mv_dtd *curr_dtd = dma_to_virt(
-					&udc->dev->dev, dqh->curr_dtd_ptr);
-
-				loops = LOOPS(DTD_TIMEOUT);
-				while (curr_dtd->size_ioc_sts
-					& DTD_STATUS_ACTIVE) {
-					if (loops == 0) {
-						retval = -ETIME;
-						goto done;
-					}
-					loops--;
-					udelay(LOOPS_USEC);
-				}
-			}
-			/* No other transfers on the queue */
+		usbcmd = readl(&udc->op_regs->usbcmd);
+		usbcmd &= USBCMD_ATDTW_TRIPWIRE_CLEAR;
+		writel(usbcmd, &udc->op_regs->usbcmd);
 
-			/* Write dQH next pointer and terminate bit to 0 */
-			dqh->next_dtd_ptr = req->head->td_dma
-				& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
-			dqh->size_ioc_int_sts = 0;
+		if (epstatus)
+			goto done;
+	}
 
-			/*
-			 * Ensure that updates to the QH will
-			 * occur before priming.
-			 */
-			wmb();
+	/* Write dQH next pointer and terminate bit to 0 */
+	dqh->next_dtd_ptr = req->head->td_dma
+				& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
 
-			/* Prime the Endpoint */
-			writel(bit_pos, &udc->op_regs->epprime);
-		}
-	} else {
-		/* Write dQH next pointer and terminate bit to 0 */
-		dqh->next_dtd_ptr = req->head->td_dma
-			& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
-		dqh->size_ioc_int_sts = 0;
+	/* clear active and halt bit, in case set from a previous error */
+	dqh->size_ioc_int_sts &= ~(DTD_STATUS_ACTIVE | DTD_STATUS_HALTED);
 
-		/* Ensure that updates to the QH will occur before priming. */
-		wmb();
+	/* Ensure that updates to the QH will occure before priming. */
+	wmb();
 
-		/* Prime the Endpoint */
-		writel(bit_pos, &udc->op_regs->epprime);
+	/* Prime the Endpoint */
+	writel(bit_pos, &udc->op_regs->epprime);
 
-		if (direction == EP_DIR_IN) {
-			/* FIXME add status check after prime the IN ep */
-			int prime_again;
-			u32 curr_dtd_ptr = dqh->curr_dtd_ptr;
-
-			loops = LOOPS(DTD_TIMEOUT);
-			prime_again = 0;
-			while ((curr_dtd_ptr != req->head->td_dma)) {
-				curr_dtd_ptr = dqh->curr_dtd_ptr;
-				if (loops == 0) {
-					dev_err(&udc->dev->dev,
-						"failed to prime %s\n",
-						ep->name);
-					retval = -ETIME;
-					goto done;
-				}
-				loops--;
-				udelay(LOOPS_USEC);
-
-				if (loops == (LOOPS(DTD_TIMEOUT) >> 2)) {
-					if (prime_again)
-						goto done;
-					dev_info(&udc->dev->dev,
-						"prime again\n");
-					writel(bit_pos,
-						&udc->op_regs->epprime);
-					prime_again = 1;
-				}
-			}
-		}
-	}
 done:
 	return retval;
 }
 
+
 static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
 		dma_addr_t *dma, int *is_last)
 {
@@ -841,6 +778,27 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	return 0;
 }
 
+static void mv_prime_ep(struct mv_ep *ep, struct mv_req *req)
+{
+	struct mv_dqh *dqh = ep->dqh;
+	u32 bit_pos;
+
+	/* Write dQH next pointer and terminate bit to 0 */
+	dqh->next_dtd_ptr = req->head->td_dma
+		& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
+
+	/* clear active and halt bit, in case set from a previous error */
+	dqh->size_ioc_int_sts &= ~(DTD_STATUS_ACTIVE | DTD_STATUS_HALTED);
+
+	/* Ensure that updates to the QH will occure before priming. */
+	wmb();
+
+	bit_pos = 1 << (((ep_dir(ep) == EP_DIR_OUT) ? 0 : 16) + ep->ep_num);
+
+	/* Prime the Endpoint */
+	writel(bit_pos, &ep->udc->op_regs->epprime);
+}
+
 /* dequeues (cancels, unlinks) an I/O request from an endpoint */
 static int mv_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 {
@@ -883,15 +841,13 @@ static int mv_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 
 		/* The request isn't the last request in this ep queue */
 		if (req->queue.next != &ep->queue) {
-			struct mv_dqh *qh;
 			struct mv_req *next_req;
 
-			qh = ep->dqh;
-			next_req = list_entry(req->queue.next, struct mv_req,
-					queue);
+			next_req = list_entry(req->queue.next,
+				struct mv_req, queue);
 
 			/* Point the QH to the first TD of next request */
-			writel((u32) next_req->head, &qh->curr_dtd_ptr);
+			mv_prime_ep(ep, next_req);
 		} else {
 			struct mv_dqh *qh;
 
@@ -1056,6 +1012,8 @@ static void udc_stop(struct mv_udc *udc)
 		USBINTR_PORT_CHANGE_DETECT_EN | USBINTR_RESET_EN);
 	writel(tmp, &udc->op_regs->usbintr);
 
+	udc->stopped = 1;
+
 	/* Reset the Run the bit in the command register to stop VUSB */
 	tmp = readl(&udc->op_regs->usbcmd);
 	tmp &= ~USBCMD_RUN_STOP;
@@ -1072,6 +1030,8 @@ static void udc_start(struct mv_udc *udc)
 	/* Enable interrupts */
 	writel(usbintr, &udc->op_regs->usbintr);
 
+	udc->stopped = 0;
+
 	/* Set the Run bit in the command register */
 	writel(USBCMD_RUN_STOP, &udc->op_regs->usbcmd);
 }
@@ -1134,11 +1094,11 @@ static int udc_reset(struct mv_udc *udc)
 	return 0;
 }
 
-static int mv_udc_enable(struct mv_udc *udc)
+static int mv_udc_enable_internal(struct mv_udc *udc)
 {
 	int retval;
 
-	if (udc->clock_gating == 0 || udc->active)
+	if (udc->active)
 		return 0;
 
 	dev_dbg(&udc->dev->dev, "enable udc\n");
@@ -1157,9 +1117,17 @@ static int mv_udc_enable(struct mv_udc *udc)
 	return 0;
 }
 
-static void mv_udc_disable(struct mv_udc *udc)
+static int mv_udc_enable(struct mv_udc *udc)
 {
-	if (udc->clock_gating && udc->active) {
+	if (udc->clock_gating)
+		return mv_udc_enable_internal(udc);
+
+	return 0;
+}
+
+static void mv_udc_disable_internal(struct mv_udc *udc)
+{
+	if (udc->active) {
 		dev_dbg(&udc->dev->dev, "disable udc\n");
 		if (udc->pdata->phy_deinit)
 			udc->pdata->phy_deinit(udc->phy_regs);
@@ -1168,6 +1136,12 @@ static void mv_udc_disable(struct mv_udc *udc)
 	}
 }
 
+static void mv_udc_disable(struct mv_udc *udc)
+{
+	if (udc->clock_gating)
+		mv_udc_disable_internal(udc);
+}
+
 static int mv_udc_get_frame(struct usb_gadget *gadget)
 {
 	struct mv_udc *udc;
@@ -1178,7 +1152,7 @@ static int mv_udc_get_frame(struct usb_gadget *gadget)
 
 	udc = container_of(gadget, struct mv_udc, gadget);
 
-	retval = readl(udc->op_regs->frindex) & USB_FRINDEX_MASKS;
+	retval = readl(&udc->op_regs->frindex) & USB_FRINDEX_MASKS;
 
 	return retval;
 }
@@ -1212,10 +1186,11 @@ static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active)
 	udc = container_of(gadget, struct mv_udc, gadget);
 	spin_lock_irqsave(&udc->lock, flags);
 
+	udc->vbus_active = (is_active != 0);
+
 	dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n",
 		__func__, udc->softconnect, udc->vbus_active);
 
-	udc->vbus_active = (is_active != 0);
 	if (udc->driver && udc->softconnect && udc->vbus_active) {
 		retval = mv_udc_enable(udc);
 		if (retval == 0) {
@@ -1244,10 +1219,11 @@ static int mv_udc_pullup(struct usb_gadget *gadget, int is_on)
 	udc = container_of(gadget, struct mv_udc, gadget);
 	spin_lock_irqsave(&udc->lock, flags);
 
+	udc->softconnect = (is_on != 0);
+
 	dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n",
 			__func__, udc->softconnect, udc->vbus_active);
 
-	udc->softconnect = (is_on != 0);
 	if (udc->driver && udc->softconnect && udc->vbus_active) {
 		retval = mv_udc_enable(udc);
 		if (retval == 0) {
@@ -1407,6 +1383,20 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
 		return retval;
 	}
 
+	if (udc->transceiver) {
+		retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
+		if (retval) {
+			dev_err(&udc->dev->dev,
+				"unable to register peripheral to otg\n");
+			if (driver->unbind) {
+				driver->unbind(&udc->gadget);
+				udc->gadget.dev.driver = NULL;
+				udc->driver = NULL;
+			}
+			return retval;
+		}
+	}
+
 	/* pullup is always on */
 	mv_udc_pullup(&udc->gadget, 1);
 
@@ -2026,6 +2016,10 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
 	struct mv_udc *udc = (struct mv_udc *)dev;
 	u32 status, intr;
 
+	/* Disable ISR when stopped bit is set */
+	if (udc->stopped)
+		return IRQ_NONE;
+
 	spin_lock(&udc->lock);
 
 	status = readl(&udc->op_regs->usbsts);
@@ -2109,7 +2103,12 @@ static int __devexit mv_udc_remove(struct platform_device *dev)
 		destroy_workqueue(udc->qwork);
 	}
 
-	if (udc->pdata && udc->pdata->vbus && udc->clock_gating)
+	/*
+	 * If we have transceiver inited,
+	 * then vbus irq will not be requested in udc driver.
+	 */
+	if (udc->pdata && udc->pdata->vbus
+		&& udc->clock_gating && udc->transceiver == NULL)
 		free_irq(udc->pdata->vbus->irq, &dev->dev);
 
 	/* free memory allocated in probe */
@@ -2129,11 +2128,9 @@ static int __devexit mv_udc_remove(struct platform_device *dev)
 
 	if (udc->cap_regs)
 		iounmap(udc->cap_regs);
-	udc->cap_regs = NULL;
 
 	if (udc->phy_regs)
-		iounmap((void *)udc->phy_regs);
-	udc->phy_regs = 0;
+		iounmap(udc->phy_regs);
 
 	if (udc->status_req) {
 		kfree(udc->status_req->req.buf);
@@ -2182,6 +2179,11 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 
 	udc->dev = dev;
 
+#ifdef CONFIG_USB_OTG_UTILS
+	if (pdata->mode == MV_USB_MODE_OTG)
+		udc->transceiver = otg_get_transceiver();
+#endif
+
 	udc->clknum = pdata->clknum;
 	for (clk_i = 0; clk_i < udc->clknum; clk_i++) {
 		udc->clk[clk_i] = clk_get(&dev->dev, pdata->clkname[clk_i]);
@@ -2213,24 +2215,20 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 		goto err_iounmap_capreg;
 	}
 
-	udc->phy_regs = (unsigned int)ioremap(r->start, resource_size(r));
-	if (udc->phy_regs == 0) {
+	udc->phy_regs = ioremap(r->start, resource_size(r));
+	if (udc->phy_regs == NULL) {
 		dev_err(&dev->dev, "failed to map phy I/O memory\n");
 		retval = -EBUSY;
 		goto err_iounmap_capreg;
 	}
 
 	/* we will acces controller register, so enable the clk */
-	udc_clock_enable(udc);
-	if (pdata->phy_init) {
-		retval = pdata->phy_init(udc->phy_regs);
-		if (retval) {
-			dev_err(&dev->dev, "phy init error %d\n", retval);
-			goto err_iounmap_phyreg;
-		}
-	}
+	retval = mv_udc_enable_internal(udc);
+	if (retval)
+		goto err_iounmap_phyreg;
 
-	udc->op_regs = (struct mv_op_regs __iomem *)((u32)udc->cap_regs
+	udc->op_regs =
+		(struct mv_op_regs __iomem *)((unsigned long)udc->cap_regs
 		+ (readl(&udc->cap_regs->caplength_hciversion)
 			& CAPLENGTH_MASK));
 	udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK;
@@ -2312,7 +2310,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 	udc->gadget.ep0 = &udc->eps[0].ep;	/* gadget ep0 */
 	INIT_LIST_HEAD(&udc->gadget.ep_list);	/* ep_list */
 	udc->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
-	udc->gadget.is_dualspeed = 1;		/* support dual speed */
+	udc->gadget.max_speed = USB_SPEED_HIGH;	/* support dual speed */
 
 	/* the "gadget" abstracts/virtualizes the controller */
 	dev_set_name(&udc->gadget.dev, "gadget");
@@ -2328,7 +2326,9 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 	eps_init(udc);
 
 	/* VBUS detect: we can disable/enable clock on demand.*/
-	if (pdata->vbus) {
+	if (udc->transceiver)
+		udc->clock_gating = 1;
+	else if (pdata->vbus) {
 		udc->clock_gating = 1;
 		retval = request_threaded_irq(pdata->vbus->irq, NULL,
 				mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc);
@@ -2354,11 +2354,9 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 	 * If not, it means that VBUS detection is not supported, we
 	 * have to enable vbus active all the time to let controller work.
 	 */
-	if (udc->clock_gating) {
-		if (udc->pdata->phy_deinit)
-			udc->pdata->phy_deinit(udc->phy_regs);
-		udc_clock_disable(udc);
-	} else
+	if (udc->clock_gating)
+		mv_udc_disable_internal(udc);
+	else
 		udc->vbus_active = 1;
 
 	retval = usb_add_gadget_udc(&dev->dev, &udc->gadget);
@@ -2371,7 +2369,8 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 	return 0;
 
 err_unregister:
-	if (udc->pdata && udc->pdata->vbus && udc->clock_gating)
+	if (udc->pdata && udc->pdata->vbus
+		&& udc->clock_gating && udc->transceiver == NULL)
 		free_irq(pdata->vbus->irq, &dev->dev);
 	device_unregister(&udc->gadget.dev);
 err_free_irq:
@@ -2387,11 +2386,9 @@ err_free_dma:
 	dma_free_coherent(&dev->dev, udc->ep_dqh_size,
 			udc->ep_dqh, udc->ep_dqh_dma);
 err_disable_clock:
-	if (udc->pdata->phy_deinit)
-		udc->pdata->phy_deinit(udc->phy_regs);
-	udc_clock_disable(udc);
+	mv_udc_disable_internal(udc);
 err_iounmap_phyreg:
-	iounmap((void *)udc->phy_regs);
+	iounmap(udc->phy_regs);
 err_iounmap_capreg:
 	iounmap(udc->cap_regs);
 err_put_clk:
@@ -2407,7 +2404,30 @@ static int mv_udc_suspend(struct device *_dev)
 {
 	struct mv_udc *udc = the_controller;
 
-	udc_stop(udc);
+	/* if OTG is enabled, the following will be done in OTG driver*/
+	if (udc->transceiver)
+		return 0;
+
+	if (udc->pdata->vbus && udc->pdata->vbus->poll)
+		if (udc->pdata->vbus->poll() == VBUS_HIGH) {
+			dev_info(&udc->dev->dev, "USB cable is connected!\n");
+			return -EAGAIN;
+		}
+
+	/*
+	 * only cable is unplugged, udc can suspend.
+	 * So do not care about clock_gating == 1.
+	 */
+	if (!udc->clock_gating) {
+		udc_stop(udc);
+
+		spin_lock_irq(&udc->lock);
+		/* stop all usb activities */
+		stop_activity(udc, udc->driver);
+		spin_unlock_irq(&udc->lock);
+
+		mv_udc_disable_internal(udc);
+	}
 
 	return 0;
 }
@@ -2417,20 +2437,22 @@ static int mv_udc_resume(struct device *_dev)
 	struct mv_udc *udc = the_controller;
 	int retval;
 
-	if (udc->pdata->phy_init) {
-		retval = udc->pdata->phy_init(udc->phy_regs);
-		if (retval) {
-			dev_err(&udc->dev->dev,
-				"init phy error %d when resume back\n",
-				retval);
+	/* if OTG is enabled, the following will be done in OTG driver*/
+	if (udc->transceiver)
+		return 0;
+
+	if (!udc->clock_gating) {
+		retval = mv_udc_enable_internal(udc);
+		if (retval)
 			return retval;
+
+		if (udc->driver && udc->softconnect) {
+			udc_reset(udc);
+			ep0_reset(udc);
+			udc_start(udc);
 		}
 	}
 
-	udc_reset(udc);
-	ep0_reset(udc);
-	udc_start(udc);
-
 	return 0;
 }
 
@@ -2457,30 +2479,16 @@ static struct platform_driver udc_driver = {
 	.shutdown	= mv_udc_shutdown,
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= "pxa-u2o",
+		.name	= "mv-udc",
 #ifdef CONFIG_PM
 		.pm	= &mv_udc_pm_ops,
 #endif
 	},
 };
-MODULE_ALIAS("platform:pxa-u2o");
 
+module_platform_driver(udc_driver);
+MODULE_ALIAS("platform:mv-udc");
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>");
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
-
-
-static int __init init(void)
-{
-	return platform_driver_register(&udc_driver);
-}
-module_init(init);
-
-
-static void __exit cleanup(void)
-{
-	platform_driver_unregister(&udc_driver);
-}
-module_exit(cleanup);
-
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index d1b76368472f..4c81d540bc26 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -1459,7 +1459,7 @@ static int net2272_start(struct usb_gadget *_gadget,
 	unsigned i;
 
 	if (!driver || !driver->unbind || !driver->setup ||
-	    driver->speed != USB_SPEED_HIGH)
+	    driver->max_speed != USB_SPEED_HIGH)
 		return -EINVAL;
 
 	dev = container_of(_gadget, struct net2272, gadget);
@@ -2235,7 +2235,7 @@ net2272_probe_init(struct device *dev, unsigned int irq)
 	ret->irq = irq;
 	ret->dev = dev;
 	ret->gadget.ops = &net2272_ops;
-	ret->gadget.is_dualspeed = 1;
+	ret->gadget.max_speed = USB_SPEED_HIGH;
 
 	/* the "gadget" abstracts/virtualizes the controller */
 	dev_set_name(&ret->gadget.dev, "gadget");
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index da2b9d0be3ca..cf1f36454d08 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -1881,7 +1881,7 @@ static int net2280_start(struct usb_gadget *_gadget,
 	 * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE)
 	 * "must not be used in normal operation"
 	 */
-	if (!driver || driver->speed < USB_SPEED_HIGH
+	if (!driver || driver->max_speed < USB_SPEED_HIGH
 			|| !driver->setup)
 		return -EINVAL;
 
@@ -2698,7 +2698,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 	spin_lock_init (&dev->lock);
 	dev->pdev = pdev;
 	dev->gadget.ops = &net2280_ops;
-	dev->gadget.is_dualspeed = 1;
+	dev->gadget.max_speed = USB_SPEED_HIGH;
 
 	/* the "gadget" abstracts/virtualizes the controller */
 	dev_set_name(&dev->gadget.dev, "gadget");
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 788989a10223..7db5bbe6251b 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -2110,7 +2110,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 		return -ENODEV;
 	if (!driver
 			// FIXME if otg, check:  driver->is_otg
-			|| driver->speed < USB_SPEED_FULL
+			|| driver->max_speed < USB_SPEED_FULL
 			|| !bind || !driver->setup)
 		return -EINVAL;
 
@@ -2676,6 +2676,7 @@ omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv)
 	INIT_LIST_HEAD(&udc->gadget.ep_list);
 	INIT_LIST_HEAD(&udc->iso);
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.max_speed = USB_SPEED_FULL;
 	udc->gadget.name = driver_name;
 
 	device_initialize(&udc->gadget.dev);
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 5048a0c07640..dd2313cce1d3 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -2693,7 +2693,7 @@ static int pch_udc_start(struct usb_gadget_driver *driver,
 	struct pch_udc_dev	*dev = pch_udc;
 	int			retval;
 
-	if (!driver || (driver->speed == USB_SPEED_UNKNOWN) || !bind ||
+	if (!driver || (driver->max_speed == USB_SPEED_UNKNOWN) || !bind ||
 	    !driver->setup || !driver->unbind || !driver->disconnect) {
 		dev_err(&dev->pdev->dev,
 			"%s: invalid driver parameter\n", __func__);
@@ -2941,7 +2941,7 @@ static int pch_udc_probe(struct pci_dev *pdev,
 	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
 	dev->gadget.dev.release = gadget_release;
 	dev->gadget.name = KBUILD_MODNAME;
-	dev->gadget.is_dualspeed = 1;
+	dev->gadget.max_speed = USB_SPEED_HIGH;
 
 	retval = device_register(&dev->gadget.dev);
 	if (retval)
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 65a8834f274b..d83134b0f78a 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -1141,7 +1141,7 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 				break;
 #ifdef CONFIG_USB_GADGET_DUALSPEED
 			case USB_DT_DEVICE_QUALIFIER:
-				if (!gadget->is_dualspeed)
+				if (!gadget_is_dualspeed(gadget))
 					break;
 				/*
 				 * assumes ep0 uses the same value for both
@@ -1155,7 +1155,7 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 				break;
 
 			case USB_DT_OTHER_SPEED_CONFIG:
-				if (!gadget->is_dualspeed)
+				if (!gadget_is_dualspeed(gadget))
 					break;
 				/* FALLTHROUGH */
 #endif /* CONFIG_USB_GADGET_DUALSPEED */
@@ -1535,7 +1535,7 @@ fail:
 /*-------------------------------------------------------------------------*/
 
 static struct usb_gadget_driver printer_driver = {
-	.speed		= DEVSPEED,
+	.max_speed	= DEVSPEED,
 
 	.function	= (char *) driver_desc,
 	.unbind		= printer_unbind,
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index c090a7e3ecf8..dd470635f4f7 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -1264,7 +1264,7 @@ static int pxa25x_start(struct usb_gadget_driver *driver,
 	int			retval;
 
 	if (!driver
-			|| driver->speed < USB_SPEED_FULL
+			|| driver->max_speed < USB_SPEED_FULL
 			|| !bind
 			|| !driver->disconnect
 			|| !driver->setup)
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 18b6b091f2a6..f4c44eb806c3 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1807,7 +1807,7 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver,
 	struct pxa_udc *udc = the_controller;
 	int retval;
 
-	if (!driver || driver->speed < USB_SPEED_FULL || !bind
+	if (!driver || driver->max_speed < USB_SPEED_FULL || !bind
 			|| !driver->disconnect || !driver->setup)
 		return -EINVAL;
 	if (!udc)
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index fc719a3f8557..f5b8d215e1d5 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1746,7 +1746,7 @@ static int r8a66597_start(struct usb_gadget *gadget,
 	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
 
 	if (!driver
-			|| driver->speed < USB_SPEED_HIGH
+			|| driver->max_speed < USB_SPEED_HIGH
 			|| !driver->setup)
 		return -EINVAL;
 	if (!r8a66597)
@@ -1911,7 +1911,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 
 	r8a66597->gadget.ops = &r8a66597_gadget_ops;
 	dev_set_name(&r8a66597->gadget.dev, "gadget");
-	r8a66597->gadget.is_dualspeed = 1;
+	r8a66597->gadget.max_speed = USB_SPEED_HIGH;
 	r8a66597->gadget.dev.parent = &pdev->dev;
 	r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask;
 	r8a66597->gadget.dev.release = pdev->dev.release;
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index b31448229f0b..69295ba9d99a 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2586,7 +2586,7 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver,
 		return -EINVAL;
 	}
 
-	if (driver->speed < USB_SPEED_FULL)
+	if (driver->max_speed < USB_SPEED_FULL)
 		dev_err(hsotg->dev, "%s: bad speed\n", __func__);
 
 	if (!bind || !driver->setup) {
@@ -3362,7 +3362,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 
 	dev_set_name(&hsotg->gadget.dev, "gadget");
 
-	hsotg->gadget.is_dualspeed = 1;
+	hsotg->gadget.max_speed = USB_SPEED_HIGH;
 	hsotg->gadget.ops = &s3c_hsotg_gadget_ops;
 	hsotg->gadget.name = dev_name(dev);
 
@@ -3467,18 +3467,7 @@ static struct platform_driver s3c_hsotg_driver = {
 	.resume		= s3c_hsotg_resume,
 };
 
-static int __init s3c_hsotg_modinit(void)
-{
-	return platform_driver_register(&s3c_hsotg_driver);
-}
-
-static void __exit s3c_hsotg_modexit(void)
-{
-	platform_driver_unregister(&s3c_hsotg_driver);
-}
-
-module_init(s3c_hsotg_modinit);
-module_exit(s3c_hsotg_modexit);
+module_platform_driver(s3c_hsotg_driver);
 
 MODULE_DESCRIPTION("Samsung S3C USB High-speed/OtG device");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 20a553b46aed..df8661d266cb 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -28,9 +28,10 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/prefetch.h>
+#include <linux/platform_data/s3c-hsudc.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/regs-s3c2443-clock.h>
-#include <plat/udc.h>
 
 #define S3C_HSUDC_REG(x)	(x)
 
@@ -87,6 +88,12 @@
 #define DATA_STATE_XMIT			(1)
 #define DATA_STATE_RECV			(2)
 
+static const char * const s3c_hsudc_supply_names[] = {
+	"vdda",		/* analog phy supply, 3.3V */
+	"vddi",		/* digital phy supply, 1.2V */
+	"vddosc",	/* oscillator supply, 1.8V - 3.3V */
+};
+
 /**
  * struct s3c_hsudc_ep - Endpoint representation used by driver.
  * @ep: USB gadget layer representation of device endpoint.
@@ -139,6 +146,7 @@ struct s3c_hsudc {
 	struct device *dev;
 	struct s3c24xx_hsudc_platdata *pd;
 	struct otg_transceiver *transceiver;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)];
 	spinlock_t lock;
 	void __iomem *regs;
 	struct resource *mem_rsrc;
@@ -153,7 +161,6 @@ struct s3c_hsudc {
 #define ep_index(_ep)		((_ep)->bEndpointAddress & \
 					USB_ENDPOINT_NUMBER_MASK)
 
-static struct s3c_hsudc *the_controller;
 static const char driver_name[] = "s3c-udc";
 static const char ep0name[] = "ep0-control";
 
@@ -282,8 +289,7 @@ static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status)
  * All the endpoints are stopped and any pending transfer requests if any on
  * the endpoint are terminated.
  */
-static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc,
-			  struct usb_gadget_driver *driver)
+static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc)
 {
 	struct s3c_hsudc_ep *hsep;
 	int epnum;
@@ -295,10 +301,6 @@ static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc,
 		hsep->stopped = 1;
 		s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
 	}
-
-	spin_unlock(&hsudc->lock);
-	driver->disconnect(&hsudc->gadget);
-	spin_lock(&hsudc->lock);
 }
 
 /**
@@ -1135,16 +1137,15 @@ static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)
 	return IRQ_HANDLED;
 }
 
-static int s3c_hsudc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int s3c_hsudc_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct s3c_hsudc *hsudc = the_controller;
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
 	int ret;
 
 	if (!driver
-		|| driver->speed < USB_SPEED_FULL
-		|| !bind
-		|| !driver->unbind || !driver->disconnect || !driver->setup)
+		|| driver->max_speed < USB_SPEED_FULL
+		|| !driver->setup)
 		return -EINVAL;
 
 	if (!hsudc)
@@ -1155,21 +1156,12 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 
 	hsudc->driver = driver;
 	hsudc->gadget.dev.driver = &driver->driver;
-	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
-	ret = device_add(&hsudc->gadget.dev);
-	if (ret) {
-		dev_err(hsudc->dev, "failed to probe gadget device");
-		return ret;
-	}
 
-	ret = bind(&hsudc->gadget);
-	if (ret) {
-		dev_err(hsudc->dev, "%s: bind failed\n", hsudc->gadget.name);
-		device_del(&hsudc->gadget.dev);
-
-		hsudc->driver = NULL;
-		hsudc->gadget.dev.driver = NULL;
-		return ret;
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsudc->supplies),
+				    hsudc->supplies);
+	if (ret != 0) {
+		dev_err(hsudc->dev, "failed to enable supplies: %d\n", ret);
+		goto err_supplies;
 	}
 
 	/* connect to bus through transceiver */
@@ -1178,13 +1170,7 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 		if (ret) {
 			dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
 					hsudc->gadget.name);
-			driver->unbind(&hsudc->gadget);
-
-			device_del(&hsudc->gadget.dev);
-
-			hsudc->driver = NULL;
-			hsudc->gadget.dev.driver = NULL;
-			return ret;
+			goto err_otg;
 		}
 	}
 
@@ -1197,34 +1183,43 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 		hsudc->pd->gpio_init();
 
 	return 0;
+err_otg:
+	regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+err_supplies:
+	hsudc->driver = NULL;
+	hsudc->gadget.dev.driver = NULL;
+	return ret;
 }
 
-static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
+static int s3c_hsudc_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct s3c_hsudc *hsudc = the_controller;
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
 	unsigned long flags;
 
 	if (!hsudc)
 		return -ENODEV;
 
-	if (!driver || driver != hsudc->driver || !driver->unbind)
+	if (!driver || driver != hsudc->driver)
 		return -EINVAL;
 
 	spin_lock_irqsave(&hsudc->lock, flags);
-	hsudc->driver = 0;
+	hsudc->driver = NULL;
+	hsudc->gadget.dev.driver = NULL;
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
 	s3c_hsudc_uninit_phy();
 	if (hsudc->pd->gpio_uninit)
 		hsudc->pd->gpio_uninit();
-	s3c_hsudc_stop_activity(hsudc, driver);
+	s3c_hsudc_stop_activity(hsudc);
 	spin_unlock_irqrestore(&hsudc->lock, flags);
 
 	if (hsudc->transceiver)
 		(void) otg_set_peripheral(hsudc->transceiver, NULL);
 
-	driver->unbind(&hsudc->gadget);
-	device_del(&hsudc->gadget.dev);
 	disable_irq(hsudc->irq);
 
+	regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+
 	dev_info(hsudc->dev, "unregistered gadget driver '%s'\n",
 			driver->driver.name);
 	return 0;
@@ -1242,7 +1237,7 @@ static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget)
 
 static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 {
-	struct s3c_hsudc *hsudc = the_controller;
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
 
 	if (!hsudc)
 		return -ENODEV;
@@ -1255,18 +1250,18 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 
 static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
 	.get_frame	= s3c_hsudc_gadget_getframe,
-	.start		= s3c_hsudc_start,
-	.stop		= s3c_hsudc_stop,
+	.udc_start	= s3c_hsudc_start,
+	.udc_stop	= s3c_hsudc_stop,
 	.vbus_draw	= s3c_hsudc_vbus_draw,
 };
 
-static int s3c_hsudc_probe(struct platform_device *pdev)
+static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct resource *res;
 	struct s3c_hsudc *hsudc;
 	struct s3c24xx_hsudc_platdata *pd = pdev->dev.platform_data;
-	int ret;
+	int ret, i;
 
 	hsudc = kzalloc(sizeof(struct s3c_hsudc) +
 			sizeof(struct s3c_hsudc_ep) * pd->epnum,
@@ -1276,13 +1271,22 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	the_controller = hsudc;
 	platform_set_drvdata(pdev, dev);
 	hsudc->dev = dev;
 	hsudc->pd = pdev->dev.platform_data;
 
 	hsudc->transceiver = otg_get_transceiver();
 
+	for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++)
+		hsudc->supplies[i].supply = s3c_hsudc_supply_names[i];
+
+	ret = regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies),
+				 hsudc->supplies);
+	if (ret != 0) {
+		dev_err(dev, "failed to request supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "unable to obtain driver resource data\n");
@@ -1307,10 +1311,9 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&hsudc->lock);
 
-	device_initialize(&hsudc->gadget.dev);
 	dev_set_name(&hsudc->gadget.dev, "gadget");
 
-	hsudc->gadget.is_dualspeed = 1;
+	hsudc->gadget.max_speed = USB_SPEED_HIGH;
 	hsudc->gadget.ops = &s3c_hsudc_gadget_ops;
 	hsudc->gadget.name = dev_name(dev);
 	hsudc->gadget.dev.parent = dev;
@@ -1319,6 +1322,7 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 
 	hsudc->gadget.is_otg = 0;
 	hsudc->gadget.is_a_peripheral = 0;
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
 
 	s3c_hsudc_setup_ep(hsudc);
 
@@ -1348,12 +1352,20 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 	disable_irq(hsudc->irq);
 	local_irq_enable();
 
+	ret = device_register(&hsudc->gadget.dev);
+	if (ret) {
+		put_device(&hsudc->gadget.dev);
+		goto err_add_device;
+	}
+
 	ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget);
 	if (ret)
 		goto err_add_udc;
 
 	return 0;
 err_add_udc:
+	device_unregister(&hsudc->gadget.dev);
+err_add_device:
 	clk_disable(hsudc->uclk);
 	clk_put(hsudc->uclk);
 err_clk:
@@ -1362,10 +1374,13 @@ err_irq:
 	iounmap(hsudc->regs);
 
 err_remap:
-	release_resource(hsudc->mem_rsrc);
-	kfree(hsudc->mem_rsrc);
-
+	release_mem_region(res->start, resource_size(res));
 err_res:
+	if (hsudc->transceiver)
+		otg_put_transceiver(hsudc->transceiver);
+
+	regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+err_supplies:
 	kfree(hsudc);
 	return ret;
 }
@@ -1377,21 +1392,10 @@ static struct platform_driver s3c_hsudc_driver = {
 	},
 	.probe		= s3c_hsudc_probe,
 };
-MODULE_ALIAS("platform:s3c-hsudc");
-
-static int __init s3c_hsudc_modinit(void)
-{
-	return platform_driver_register(&s3c_hsudc_driver);
-}
 
-static void __exit s3c_hsudc_modexit(void)
-{
-	platform_driver_unregister(&s3c_hsudc_driver);
-}
-
-module_init(s3c_hsudc_modinit);
-module_exit(s3c_hsudc_modexit);
+module_platform_driver(s3c_hsudc_driver);
 
 MODULE_DESCRIPTION("Samsung S3C24XX USB high-speed controller driver");
 MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c-hsudc");
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index fac4c650d4bb..3f87cb9344bb 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1683,9 +1683,9 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver,
 	if (udc->driver)
 		return -EBUSY;
 
-	if (!bind || !driver->setup || driver->speed < USB_SPEED_FULL) {
+	if (!bind || !driver->setup || driver->max_speed < USB_SPEED_FULL) {
 		printk(KERN_ERR "Invalid driver: bind %p setup %p speed %d\n",
-			bind, driver->setup, driver->speed);
+			bind, driver->setup, driver->max_speed);
 		return -EINVAL;
 	}
 #if defined(MODULE)
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 6939e17f4580..0b0d12ccc487 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -371,14 +371,28 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
 }
 static DEVICE_ATTR(soft_connect, S_IWUSR, NULL, usb_udc_softconn_store);
 
-static ssize_t usb_udc_speed_show(struct device *dev,
+#define USB_UDC_SPEED_ATTR(name, param)					\
+ssize_t usb_udc_##param##_show(struct device *dev,			\
+		struct device_attribute *attr, char *buf)		\
+{									\
+	struct usb_udc *udc = container_of(dev, struct usb_udc, dev);	\
+	return snprintf(buf, PAGE_SIZE, "%s\n",				\
+			usb_speed_string(udc->gadget->param));		\
+}									\
+static DEVICE_ATTR(name, S_IRUSR, usb_udc_##param##_show, NULL)
+
+static USB_UDC_SPEED_ATTR(current_speed, speed);
+static USB_UDC_SPEED_ATTR(maximum_speed, max_speed);
+
+/* TODO: Scheduled for removal in 3.8. */
+static ssize_t usb_udc_is_dualspeed_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-	return snprintf(buf, PAGE_SIZE, "%s\n",
-			usb_speed_string(udc->gadget->speed));
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			gadget_is_dualspeed(udc->gadget));
 }
-static DEVICE_ATTR(speed, S_IRUGO, usb_udc_speed_show, NULL);
+static DEVICE_ATTR(is_dualspeed, S_IRUSR, usb_udc_is_dualspeed_show, NULL);
 
 #define USB_UDC_ATTR(name)					\
 ssize_t usb_udc_##name##_show(struct device *dev,		\
@@ -391,7 +405,6 @@ ssize_t usb_udc_##name##_show(struct device *dev,		\
 }								\
 static DEVICE_ATTR(name, S_IRUGO, usb_udc_##name##_show, NULL)
 
-static USB_UDC_ATTR(is_dualspeed);
 static USB_UDC_ATTR(is_otg);
 static USB_UDC_ATTR(is_a_peripheral);
 static USB_UDC_ATTR(b_hnp_enable);
@@ -401,7 +414,8 @@ static USB_UDC_ATTR(a_alt_hnp_support);
 static struct attribute *usb_udc_attrs[] = {
 	&dev_attr_srp.attr,
 	&dev_attr_soft_connect.attr,
-	&dev_attr_speed.attr,
+	&dev_attr_current_speed.attr,
+	&dev_attr_maximum_speed.attr,
 
 	&dev_attr_is_dualspeed.attr,
 	&dev_attr_is_otg.attr,
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 58c4d37d312a..4d25b9009edf 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -13,82 +13,17 @@
 #include <linux/string.h>
 #include <linux/device.h>
 #include <linux/init.h>
+#include <linux/nls.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
-#include <asm/unaligned.h>
-
-
-static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
-{
-	int	count = 0;
-	u8	c;
-	u16	uchar;
-
-	/* this insists on correct encodings, though not minimal ones.
-	 * BUT it currently rejects legit 4-byte UTF-8 code points,
-	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
-	 */
-	while (len != 0 && (c = (u8) *s++) != 0) {
-		if (unlikely(c & 0x80)) {
-			// 2-byte sequence:
-			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
-			if ((c & 0xe0) == 0xc0) {
-				uchar = (c & 0x1f) << 6;
-
-				c = (u8) *s++;
-				if ((c & 0xc0) != 0x80)
-					goto fail;
-				c &= 0x3f;
-				uchar |= c;
-
-			// 3-byte sequence (most CJKV characters):
-			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
-			} else if ((c & 0xf0) == 0xe0) {
-				uchar = (c & 0x0f) << 12;
-
-				c = (u8) *s++;
-				if ((c & 0xc0) != 0x80)
-					goto fail;
-				c &= 0x3f;
-				uchar |= c << 6;
-
-				c = (u8) *s++;
-				if ((c & 0xc0) != 0x80)
-					goto fail;
-				c &= 0x3f;
-				uchar |= c;
-
-				/* no bogus surrogates */
-				if (0xd800 <= uchar && uchar <= 0xdfff)
-					goto fail;
-
-			// 4-byte sequence (surrogate pairs, currently rare):
-			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
-			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
-			// (uuuuu = wwww + 1)
-			// FIXME accept the surrogate code points (only)
-
-			} else
-				goto fail;
-		} else
-			uchar = c;
-		put_unaligned_le16(uchar, cp++);
-		count++;
-		len--;
-	}
-	return count;
-fail:
-	return -1;
-}
-
 
 /**
  * usb_gadget_get_string - fill out a string descriptor 
  * @table: of c strings encoded using UTF-8
  * @id: string id, from low byte of wValue in get string descriptor
- * @buf: at least 256 bytes
+ * @buf: at least 256 bytes, must be 16-bit aligned
  *
  * Finds the UTF-8 string matching the ID, and converts it into a
  * string descriptor in utf16-le.
@@ -125,8 +60,8 @@ usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
 
 	/* string descriptors have length, tag, then UTF16-LE text */
 	len = min ((size_t) 126, strlen (s->s));
-	memset (buf + 2, 0, 2 * len);	/* zero all the bytes */
-	len = utf8_to_utf16le(s->s, (__le16 *)&buf[2], len);
+	len = utf8s_to_utf16s(s->s, len, UTF16_LITTLE_ENDIAN,
+			(wchar_t *) &buf[2], 126);
 	if (len < 0)
 		return -EINVAL;
 	buf [0] = (len + 1) * 2;