usb: musb: twl: use mailbox API to send VBUS or ID events

The atomic notifier from twl4030/twl6030 to notifiy VBUS and ID events,
is replaced by a direct call to omap musb blue.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 23 insertions, 23 deletions

diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 25a09fabbe35..a7b809e217ea 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -33,11 +33,11 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/musb-omap.h>
 #include <linux/usb/ulpi.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/consumer.h>
 #include <linux/err.h>
-#include <linux/notifier.h>
 #include <linux/slab.h>
 
 /* Register defines */
@@ -159,7 +159,7 @@ struct twl4030_usb {
 	enum twl4030_usb_mode	usb_mode;
 
 	int			irq;
-	u8			linkstat;
+	enum omap_musb_vbus_id_status linkstat;
 	bool			vbus_supplied;
 	u8			asleep;
 	bool			irq_enabled;
@@ -246,10 +246,11 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
 
 /*-------------------------------------------------------------------------*/
 
-static enum usb_phy_events twl4030_usb_linkstat(struct twl4030_usb *twl)
+static enum omap_musb_vbus_id_status
+	twl4030_usb_linkstat(struct twl4030_usb *twl)
 {
 	int	status;
-	int	linkstat = USB_EVENT_NONE;
+	enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN;
 	struct usb_otg *otg = twl->phy.otg;
 
 	twl->vbus_supplied = false;
@@ -273,24 +274,24 @@ static enum usb_phy_events twl4030_usb_linkstat(struct twl4030_usb *twl)
                         twl->vbus_supplied = true;
 
 		if (status & BIT(2))
-			linkstat = USB_EVENT_ID;
+			linkstat = OMAP_MUSB_ID_GROUND;
 		else
-			linkstat = USB_EVENT_VBUS;
-	} else
-		linkstat = USB_EVENT_NONE;
+			linkstat = OMAP_MUSB_VBUS_VALID;
+	} else {
+		if (twl->linkstat != OMAP_MUSB_UNKNOWN)
+			linkstat = OMAP_MUSB_VBUS_OFF;
+	}
 
 	dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
 			status, status, linkstat);
 
-	twl->phy.last_event = linkstat;
-
 	/* REVISIT this assumes host and peripheral controllers
 	 * are registered, and that both are active...
 	 */
 
 	spin_lock_irq(&twl->lock);
 	twl->linkstat = linkstat;
-	if (linkstat == USB_EVENT_ID) {
+	if (linkstat == OMAP_MUSB_ID_GROUND) {
 		otg->default_a = true;
 		twl->phy.state = OTG_STATE_A_IDLE;
 	} else {
@@ -501,10 +502,10 @@ static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
 static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 {
 	struct twl4030_usb *twl = _twl;
-	int status;
+	enum omap_musb_vbus_id_status status;
 
 	status = twl4030_usb_linkstat(twl);
-	if (status >= 0) {
+	if (status > 0) {
 		/* FIXME add a set_power() method so that B-devices can
 		 * configure the charger appropriately.  It's not always
 		 * correct to consume VBUS power, and how much current to
@@ -516,13 +517,13 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 		 * USB_LINK_VBUS state.  musb_hdrc won't care until it
 		 * starts to handle softconnect right.
 		 */
-		if (status == USB_EVENT_NONE)
+		if (status == OMAP_MUSB_VBUS_OFF ||
+				status == OMAP_MUSB_ID_FLOAT)
 			twl4030_phy_suspend(twl, 0);
 		else
 			twl4030_phy_resume(twl);
 
-		atomic_notifier_call_chain(&twl->phy.notifier, status,
-				twl->phy.otg->gadget);
+		omap_musb_mailbox(twl->linkstat);
 	}
 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
 
@@ -531,11 +532,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 
 static void twl4030_usb_phy_init(struct twl4030_usb *twl)
 {
-	int status;
+	enum omap_musb_vbus_id_status status;
 
 	status = twl4030_usb_linkstat(twl);
-	if (status >= 0) {
-		if (status == USB_EVENT_NONE) {
+	if (status > 0) {
+		if (status == OMAP_MUSB_VBUS_OFF ||
+				status == OMAP_MUSB_ID_FLOAT) {
 			__twl4030_phy_power(twl, 0);
 			twl->asleep = 1;
 		} else {
@@ -543,8 +545,7 @@ static void twl4030_usb_phy_init(struct twl4030_usb *twl)
 			twl->asleep = 0;
 		}
 
-		atomic_notifier_call_chain(&twl->phy.notifier, status,
-				twl->phy.otg->gadget);
+		omap_musb_mailbox(twl->linkstat);
 	}
 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
 }
@@ -613,6 +614,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
 	twl->usb_mode		= pdata->usb_mode;
 	twl->vbus_supplied	= false;
 	twl->asleep		= 1;
+	twl->linkstat		= OMAP_MUSB_UNKNOWN;
 
 	twl->phy.dev		= twl->dev;
 	twl->phy.label		= "twl4030";
@@ -639,8 +641,6 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
 	if (device_create_file(&pdev->dev, &dev_attr_vbus))
 		dev_warn(&pdev->dev, "could not create sysfs file\n");
 
-	ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
-
 	/* Our job is to use irqs and status from the power module
 	 * to keep the transceiver disabled when nothing's connected.
 	 *