Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt/PHY driver updates from Greg KH:
 "Here is the big USB and Thunderbolt and PHY driver updates for
  5.6-rc1.

  With the advent of USB4, "Thunderbolt" has really become USB4, so the
  renaming of the Kconfig option and starting to share subsystem code
  has begun, hence both subsystems coming in through the same tree here.

  PHY driver updates also touched USB drivers, so that is coming in
  through here as well.

  Major stuff included in here are:
   - USB 4 initial support added (i.e. Thunderbolt)
   - musb driver updates
   - USB gadget driver updates
   - PHY driver updates
   - USB PHY driver updates
   - lots of USB serial stuff fixed up
   - USB typec updates
   - USB-IP fixes
   - lots of other smaller USB driver updates

  All of these have been in linux-next for a while now (the usb-serial
  tree is already tested in linux-next on its own before merged into
  here), with no reported issues"

[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
  that causes configuration warnings    - Linus ]

* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  Doc: ABI: add usb charger uevent
  usb: phy: show USB charger type for user
  usb: cdns3: fix spelling mistake and rework grammar in text
  usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
  USB: serial: ir-usb: simplify endpoint check
  USB: serial: ir-usb: make set_termios synchronous
  USB: serial: ir-usb: fix IrLAP framing
  USB: serial: ir-usb: fix link-speed handling
  USB: serial: ir-usb: add missing endpoint sanity check
  usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
  usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
  usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
  usb: typec: tcpci: mask event interrupts when remove driver
  usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
  usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
  usb: chipidea: handle single role for usb role class
  usb: musb: fix spelling mistake: "periperal" -> "peripheral"
  phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
  USB: usbfs: Always unlink URBs in reverse order
  ...

1 files changed, 114 insertions, 71 deletions

diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 302eb9530859..79d0586e2b33 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -45,9 +45,10 @@ static int buffer_size;
 static int xbof = -1;
 
 static int  ir_startup (struct usb_serial *serial);
-static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port);
-static int ir_prepare_write_buffer(struct usb_serial_port *port,
-						void *dest, size_t size);
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count);
+static int ir_write_room(struct tty_struct *tty);
+static void ir_write_bulk_callback(struct urb *urb);
 static void ir_process_read_urb(struct urb *urb);
 static void ir_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
@@ -75,10 +76,13 @@ static struct usb_serial_driver ir_device = {
 	.description		= "IR Dongle",
 	.id_table		= ir_id_table,
 	.num_ports		= 1,
+	.num_bulk_in		= 1,
+	.num_bulk_out		= 1,
 	.set_termios		= ir_set_termios,
 	.attach			= ir_startup,
-	.open			= ir_open,
-	.prepare_write_buffer	= ir_prepare_write_buffer,
+	.write			= ir_write,
+	.write_room		= ir_write_room,
+	.write_bulk_callback	= ir_write_bulk_callback,
 	.process_read_urb	= ir_process_read_urb,
 };
 
@@ -251,35 +255,102 @@ static int ir_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count)
 {
-	int i;
+	struct urb *urb = NULL;
+	unsigned long flags;
+	int ret;
 
-	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
-		port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET;
+	if (port->bulk_out_size == 0)
+		return -EINVAL;
 
-	/* Start reading from the device */
-	return usb_serial_generic_open(tty, port);
-}
+	if (count == 0)
+		return 0;
 
-static int ir_prepare_write_buffer(struct usb_serial_port *port,
-						void *dest, size_t size)
-{
-	unsigned char *buf = dest;
-	int count;
+	count = min(count, port->bulk_out_size - 1);
+
+	spin_lock_irqsave(&port->lock, flags);
+	if (__test_and_clear_bit(0, &port->write_urbs_free)) {
+		urb = port->write_urbs[0];
+		port->tx_bytes += count;
+	}
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (!urb)
+		return 0;
 
 	/*
 	 * The first byte of the packet we send to the device contains an
-	 * inbound header which indicates an additional number of BOFs and
+	 * outbound header which indicates an additional number of BOFs and
 	 * a baud rate change.
 	 *
 	 * See section 5.4.2.2 of the USB IrDA spec.
 	 */
-	*buf = ir_xbof | ir_baud;
+	*(u8 *)urb->transfer_buffer = ir_xbof | ir_baud;
+
+	memcpy(urb->transfer_buffer + 1, buf, count);
+
+	urb->transfer_buffer_length = count + 1;
+	urb->transfer_flags = URB_ZERO_PACKET;
+
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret) {
+		dev_err(&port->dev, "failed to submit write urb: %d\n", ret);
+
+		spin_lock_irqsave(&port->lock, flags);
+		__set_bit(0, &port->write_urbs_free);
+		port->tx_bytes -= count;
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		return ret;
+	}
+
+	return count;
+}
+
+static void ir_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	__set_bit(0, &port->write_urbs_free);
+	port->tx_bytes -= urb->transfer_buffer_length - 1;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	switch (status) {
+	case 0:
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev_dbg(&port->dev, "write urb stopped: %d\n", status);
+		return;
+	case -EPIPE:
+		dev_err(&port->dev, "write urb stopped: %d\n", status);
+		return;
+	default:
+		dev_err(&port->dev, "nonzero write-urb status: %d\n", status);
+		break;
+	}
+
+	usb_serial_port_softint(port);
+}
 
-	count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1,
-								&port->lock);
-	return count + 1;
+static int ir_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	int count = 0;
+
+	if (port->bulk_out_size == 0)
+		return 0;
+
+	if (test_bit(0, &port->write_urbs_free))
+		count = port->bulk_out_size - 1;
+
+	return count;
 }
 
 static void ir_process_read_urb(struct urb *urb)
@@ -304,23 +375,15 @@ static void ir_process_read_urb(struct urb *urb)
 	tty_flip_buffer_push(&port->port);
 }
 
-static void ir_set_termios_callback(struct urb *urb)
-{
-	kfree(urb->transfer_buffer);
-
-	if (urb->status)
-		dev_dbg(&urb->dev->dev, "%s - non-zero urb status: %d\n",
-			__func__, urb->status);
-}
-
 static void ir_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	struct urb *urb;
+	struct usb_device *udev = port->serial->dev;
 	unsigned char *transfer_buffer;
-	int result;
+	int actual_length;
 	speed_t baud;
 	int ir_baud;
+	int ret;
 
 	baud = tty_get_baud_rate(tty);
 
@@ -332,34 +395,34 @@ static void ir_set_termios(struct tty_struct *tty,
 
 	switch (baud) {
 	case 2400:
-		ir_baud = USB_IRDA_BR_2400;
+		ir_baud = USB_IRDA_LS_2400;
 		break;
 	case 9600:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		break;
 	case 19200:
-		ir_baud = USB_IRDA_BR_19200;
+		ir_baud = USB_IRDA_LS_19200;
 		break;
 	case 38400:
-		ir_baud = USB_IRDA_BR_38400;
+		ir_baud = USB_IRDA_LS_38400;
 		break;
 	case 57600:
-		ir_baud = USB_IRDA_BR_57600;
+		ir_baud = USB_IRDA_LS_57600;
 		break;
 	case 115200:
-		ir_baud = USB_IRDA_BR_115200;
+		ir_baud = USB_IRDA_LS_115200;
 		break;
 	case 576000:
-		ir_baud = USB_IRDA_BR_576000;
+		ir_baud = USB_IRDA_LS_576000;
 		break;
 	case 1152000:
-		ir_baud = USB_IRDA_BR_1152000;
+		ir_baud = USB_IRDA_LS_1152000;
 		break;
 	case 4000000:
-		ir_baud = USB_IRDA_BR_4000000;
+		ir_baud = USB_IRDA_LS_4000000;
 		break;
 	default:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		baud = 9600;
 	}
 
@@ -375,42 +438,22 @@ static void ir_set_termios(struct tty_struct *tty,
 	/*
 	 * send the baud change out on an "empty" data packet
 	 */
-	urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!urb)
-		return;
-
 	transfer_buffer = kmalloc(1, GFP_KERNEL);
 	if (!transfer_buffer)
-		goto err_buf;
+		return;
 
 	*transfer_buffer = ir_xbof | ir_baud;
 
-	usb_fill_bulk_urb(
-		urb,
-		port->serial->dev,
-		usb_sndbulkpipe(port->serial->dev,
-			port->bulk_out_endpointAddress),
-		transfer_buffer,
-		1,
-		ir_set_termios_callback,
-		port);
-
-	urb->transfer_flags = URB_ZERO_PACKET;
-
-	result = usb_submit_urb(urb, GFP_KERNEL);
-	if (result) {
-		dev_err(&port->dev, "%s - failed to submit urb: %d\n",
-							__func__, result);
-		goto err_subm;
+	ret = usb_bulk_msg(udev,
+			usb_sndbulkpipe(udev, port->bulk_out_endpointAddress),
+			transfer_buffer, 1, &actual_length, 5000);
+	if (ret || actual_length != 1) {
+		if (actual_length != 1)
+			ret = -EIO;
+		dev_err(&port->dev, "failed to change line speed: %d\n", ret);
 	}
 
-	usb_free_urb(urb);
-
-	return;
-err_subm:
 	kfree(transfer_buffer);
-err_buf:
-	usb_free_urb(urb);
 }
 
 static int __init ir_init(void)