Merge branch 'linus' into core/printk

1 files changed, 0 insertions, 123 deletions

diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h
deleted file mode 100644
index d8bfc43e9044..000000000000
--- a/drivers/usb/storage/shuttle_usbat.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Driver for SCM Microsystems USB-ATAPI cable
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Robert Baruch (autophile@dol.net)
- *   (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
- *
- * See shuttle_usbat.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_SHUTTLE_USBAT_H
-#define _USB_SHUTTLE_USBAT_H
-
-/* Supported device types */
-#define USBAT_DEV_HP8200	0x01
-#define USBAT_DEV_FLASH		0x02
-
-#define USBAT_EPP_PORT		0x10
-#define USBAT_EPP_REGISTER	0x30
-#define USBAT_ATA		0x40
-#define USBAT_ISA		0x50
-
-/* Commands (need to be logically OR'd with an access type */
-#define USBAT_CMD_READ_REG		0x00
-#define USBAT_CMD_WRITE_REG		0x01
-#define USBAT_CMD_READ_BLOCK	0x02
-#define USBAT_CMD_WRITE_BLOCK	0x03
-#define USBAT_CMD_COND_READ_BLOCK	0x04
-#define USBAT_CMD_COND_WRITE_BLOCK	0x05
-#define USBAT_CMD_WRITE_REGS	0x07
-
-/* Commands (these don't need an access type) */
-#define USBAT_CMD_EXEC_CMD	0x80
-#define USBAT_CMD_SET_FEAT	0x81
-#define USBAT_CMD_UIO		0x82
-
-/* Methods of accessing UIO register */
-#define USBAT_UIO_READ	1
-#define USBAT_UIO_WRITE	0
-
-/* Qualifier bits */
-#define USBAT_QUAL_FCQ	0x20	/* full compare */
-#define USBAT_QUAL_ALQ	0x10	/* auto load subcount */
-
-/* USBAT Flash Media status types */
-#define USBAT_FLASH_MEDIA_NONE	0
-#define USBAT_FLASH_MEDIA_CF	1
-
-/* USBAT Flash Media change types */
-#define USBAT_FLASH_MEDIA_SAME	0
-#define USBAT_FLASH_MEDIA_CHANGED	1
-
-/* USBAT ATA registers */
-#define USBAT_ATA_DATA      0x10  /* read/write data (R/W) */
-#define USBAT_ATA_FEATURES  0x11  /* set features (W) */
-#define USBAT_ATA_ERROR     0x11  /* error (R) */
-#define USBAT_ATA_SECCNT    0x12  /* sector count (R/W) */
-#define USBAT_ATA_SECNUM    0x13  /* sector number (R/W) */
-#define USBAT_ATA_LBA_ME    0x14  /* cylinder low (R/W) */
-#define USBAT_ATA_LBA_HI    0x15  /* cylinder high (R/W) */
-#define USBAT_ATA_DEVICE    0x16  /* head/device selection (R/W) */
-#define USBAT_ATA_STATUS    0x17  /* device status (R) */
-#define USBAT_ATA_CMD       0x17  /* device command (W) */
-#define USBAT_ATA_ALTSTATUS 0x0E  /* status (no clear IRQ) (R) */
-
-/* USBAT User I/O Data registers */
-#define USBAT_UIO_EPAD		0x80 /* Enable Peripheral Control Signals */
-#define USBAT_UIO_CDT		0x40 /* Card Detect (Read Only) */
-				     /* CDT = ACKD & !UI1 & !UI0 */
-#define USBAT_UIO_1		0x20 /* I/O 1 */
-#define USBAT_UIO_0		0x10 /* I/O 0 */
-#define USBAT_UIO_EPP_ATA	0x08 /* 1=EPP mode, 0=ATA mode */
-#define USBAT_UIO_UI1		0x04 /* Input 1 */
-#define USBAT_UIO_UI0		0x02 /* Input 0 */
-#define USBAT_UIO_INTR_ACK	0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
-
-/* USBAT User I/O Enable registers */
-#define USBAT_UIO_DRVRST	0x80 /* Reset Peripheral */
-#define USBAT_UIO_ACKD		0x40 /* Enable Card Detect */
-#define USBAT_UIO_OE1		0x20 /* I/O 1 set=output/clr=input */
-				     /* If ACKD=1, set OE1 to 1 also. */
-#define USBAT_UIO_OE0		0x10 /* I/O 0 set=output/clr=input */
-#define USBAT_UIO_ADPRST	0x01 /* Reset SCM chip */
-
-/* USBAT Features */
-#define USBAT_FEAT_ETEN	0x80	/* External trigger enable */
-#define USBAT_FEAT_U1	0x08
-#define USBAT_FEAT_U0	0x04
-#define USBAT_FEAT_ET1	0x02
-#define USBAT_FEAT_ET2	0x01
-
-extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int init_usbat_cd(struct us_data *us);
-extern int init_usbat_flash(struct us_data *us);
-extern int init_usbat_probe(struct us_data *us);
-
-struct usbat_info {
-	int devicetype;
-
-	/* Used for Flash readers only */
-	unsigned long sectors;     /* total sector count */
-	unsigned long ssize;       /* sector size in bytes */
-
-	unsigned char sense_key;
-	unsigned long sense_asc;   /* additional sense code */
-	unsigned long sense_ascq;  /* additional sense code qualifier */
-};
-
-#endif