Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 174 insertions, 0 deletions

diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
new file mode 100644
index 000000000000..e25f8d8fc741
--- /dev/null
+++ b/drivers/usb/storage/transport.h
@@ -0,0 +1,174 @@
+/* Driver for USB Mass Storage compliant devices
+ * Transport Functions Header File
+ *
+ * $Id: transport.h,v 1.18 2002/04/21 02:57:59 mdharm Exp $
+ *
+ * Current development and maintenance by:
+ *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _TRANSPORT_H_
+#define _TRANSPORT_H_
+
+#include <linux/config.h>
+#include <linux/blkdev.h>
+
+/* Protocols */
+
+#define US_PR_CBI	0x00		/* Control/Bulk/Interrupt */
+#define US_PR_CB	0x01		/* Control/Bulk w/o interrupt */
+#define US_PR_BULK	0x50		/* bulk only */
+#ifdef CONFIG_USB_STORAGE_USBAT
+#define US_PR_SCM_ATAPI	0x80		/* SCM-ATAPI bridge */
+#endif
+#ifdef CONFIG_USB_STORAGE_SDDR09
+#define US_PR_EUSB_SDDR09	0x81	/* SCM-SCSI bridge for SDDR-09 */
+#endif
+#ifdef CONFIG_USB_STORAGE_SDDR55
+#define US_PR_SDDR55	0x82		/* SDDR-55 (made up) */
+#endif
+#define US_PR_DPCM_USB  0xf0		/* Combination CB/SDDR09 */
+
+#ifdef CONFIG_USB_STORAGE_FREECOM
+#define US_PR_FREECOM   0xf1		/* Freecom */
+#endif
+
+#ifdef CONFIG_USB_STORAGE_DATAFAB
+#define US_PR_DATAFAB   0xf2		/* Datafab chipsets */
+#endif
+
+#ifdef CONFIG_USB_STORAGE_JUMPSHOT
+#define US_PR_JUMPSHOT  0xf3		/* Lexar Jumpshot */
+#endif
+
+#define US_PR_DEVICE	0xff		/* Use device's value */
+
+/*
+ * Bulk only data structures
+ */
+
+/* command block wrapper */
+struct bulk_cb_wrap {
+	__le32	Signature;		/* contains 'USBC' */
+	__u32	Tag;			/* unique per command id */
+	__le32	DataTransferLength;	/* size of data */
+	__u8	Flags;			/* direction in bit 0 */
+	__u8	Lun;			/* LUN normally 0 */
+	__u8	Length;			/* of of the CDB */
+	__u8	CDB[16];		/* max command */
+};
+
+#define US_BULK_CB_WRAP_LEN	31
+#define US_BULK_CB_SIGN		0x43425355	/*spells out USBC */
+#define US_BULK_FLAG_IN		1
+#define US_BULK_FLAG_OUT	0
+
+/* command status wrapper */
+struct bulk_cs_wrap {
+	__le32	Signature;		/* should = 'USBS' */
+	__u32	Tag;			/* same as original command */
+	__le32	Residue;		/* amount not transferred */
+	__u8	Status;			/* see below */
+	__u8	Filler[18];
+};
+
+#define US_BULK_CS_WRAP_LEN	13
+#define US_BULK_CS_SIGN		0x53425355	/* spells out 'USBS' */
+#define US_BULK_STAT_OK		0
+#define US_BULK_STAT_FAIL	1
+#define US_BULK_STAT_PHASE	2
+
+/* bulk-only class specific requests */
+#define US_BULK_RESET_REQUEST	0xff
+#define US_BULK_GET_MAX_LUN	0xfe
+
+/*
+ * usb_stor_bulk_transfer_xxx() return codes, in order of severity
+ */
+
+#define USB_STOR_XFER_GOOD	0	/* good transfer                 */
+#define USB_STOR_XFER_SHORT	1	/* transferred less than expected */
+#define USB_STOR_XFER_STALLED	2	/* endpoint stalled              */
+#define USB_STOR_XFER_LONG	3	/* device tried to send too much */
+#define USB_STOR_XFER_ERROR	4	/* transfer died in the middle   */
+
+/*
+ * Transport return codes
+ */
+
+#define USB_STOR_TRANSPORT_GOOD	   0   /* Transport good, command good	   */
+#define USB_STOR_TRANSPORT_FAILED  1   /* Transport good, command failed   */
+#define USB_STOR_TRANSPORT_NO_SENSE 2  /* Command failed, no auto-sense    */
+#define USB_STOR_TRANSPORT_ERROR   3   /* Transport bad (i.e. device dead) */
+
+/*
+ * We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED
+ * return codes.  But now the transport and low-level transfer routines
+ * treat an abort as just another error (-ENOENT for a cancelled URB).
+ * It is up to the invoke_transport() function to test for aborts and
+ * distinguish them from genuine communication errors.
+ */
+
+/*
+ * CBI accept device specific command
+ */
+
+#define US_CBI_ADSC		0
+
+extern int usb_stor_CBI_transport(struct scsi_cmnd *, struct us_data*);
+
+extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*);
+extern int usb_stor_CB_reset(struct us_data*);
+
+extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data*);
+extern int usb_stor_Bulk_max_lun(struct us_data*);
+extern int usb_stor_Bulk_reset(struct us_data*);
+
+extern void usb_stor_invoke_transport(struct scsi_cmnd *, struct us_data*);
+extern void usb_stor_stop_transport(struct us_data*);
+
+extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
+		u8 request, u8 requesttype, u16 value, u16 index,
+		void *data, u16 size, int timeout);
+extern int usb_stor_clear_halt(struct us_data *us, unsigned int pipe);
+
+extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
+		u8 request, u8 requesttype, u16 value, u16 index,
+		void *data, u16 size);
+extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
+		void *buf, unsigned int length, unsigned int *act_len);
+extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
+		void *buf, unsigned int length, int use_sg, int *residual);
+
+#endif