wusb: do a proper channel stop

When stopping the WUSB channel the host should send Channel Stop IEs giving
the WUSB Channel Time of the last MMC.  Both WHCI and HWA hosts provide a
channel stop command for this.

Signed-off-by: David Vrabel <david.vrabel@csr.com>

2 files changed, 16 insertions, 16 deletions

diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c
index cfa77a01cebd..af2aee0fdffa 100644
--- a/drivers/usb/wusbcore/mmc.c
+++ b/drivers/usb/wusbcore/mmc.c
@@ -250,18 +250,14 @@ error_alloc:
  * wusbhc_stop - stop transmitting MMCs
  * @wusbhc: the HC to stop
  *
- * Send a Host Disconnect IE, wait, remove all the MMCs (stop sending MMCs).
- *
- * If we can't allocate a Host Stop IE, screw it, we don't notify the
- * devices we are disconnecting...
+ * Stops the WUSB channel and removes the cluster reservation.
  */
 void wusbhc_stop(struct wusbhc *wusbhc)
 {
 	if (wusbhc->active) {
 		wusbhc->active = 0;
-		wusbhc->stop(wusbhc);
+		wusbhc->stop(wusbhc, WUSB_CHANNEL_STOP_DELAY_MS);
 		wusbhc_sec_stop(wusbhc);
-		__wusbhc_host_disconnect_ie(wusbhc);
 		wusbhc_devconnect_stop(wusbhc);
 		wusbhc_rsv_terminate(wusbhc);
 	}
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index d0c132434f1b..b9bdf5a5f11b 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -64,6 +64,13 @@
 #include <linux/uwb.h>
 #include <linux/usb/wusb.h>
 
+/*
+ * Time from a WUSB channel stop request to the last transmitted MMC.
+ *
+ * This needs to be > 4.096 ms in case no MMCs can be transmitted in
+ * zone 0.
+ */
+#define WUSB_CHANNEL_STOP_DELAY_MS 8
 
 /**
  * Wireless USB device
@@ -198,21 +205,18 @@ struct wusb_port {
  * @mmcies_max	   Max number of Information Elements this HC can send
  *                 in its MMC. Read-only.
  *
+ * @start          Start the WUSB channel.
+ *
+ * @stop           Stop the WUSB channel after the specified number of
+ *                 milliseconds.  Channel Stop IEs should be transmitted
+ *                 as required by [WUSB] 4.16.2.1.
+ *
  * @mmcie_add	   HC specific operation (WHCI or HWA) for adding an
  *                 MMCIE.
  *
  * @mmcie_rm	   HC specific operation (WHCI or HWA) for removing an
  *                 MMCIE.
  *
- * @enc_types	   Array which describes the encryptions methods
- *                 supported by the host as described in WUSB1.0 --
- *                 one entry per supported method. As of WUSB1.0 there
- *                 is only four methods, we make space for eight just in
- *                 case they decide to add some more (and pray they do
- *                 it in sequential order). if 'enc_types[enc_method]
- *                 != 0', then it is supported by the host. enc_method
- *                 is USB_ENC_TYPE*.
- *
  * @set_ptk:       Set the PTK and enable encryption for a device. Or, if
  *                 the supplied key is NULL, disable encryption for that
  *                 device.
@@ -269,7 +273,7 @@ struct wusbhc {
 	u8 mmcies_max;
 	/* FIXME: make wusbhc_ops? */
 	int (*start)(struct wusbhc *wusbhc);
-	void (*stop)(struct wusbhc *wusbhc);
+	void (*stop)(struct wusbhc *wusbhc, int delay);
 	int (*mmcie_add)(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
 			 u8 handle, struct wuie_hdr *wuie);
 	int (*mmcie_rm)(struct wusbhc *wusbhc, u8 handle);