Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits)
  USB: backlight, appledisplay: fix incomplete registration failure handling
  USB: pl2303: remove unnecessary reset of usb_device in urbs
  USB: ftdi_sio: remove obsolete check in unthrottle
  USB: ftdi_sio: remove unused tx_bytes counter
  USB: qcaux: driver for auxiliary serial ports on Qualcomm devices
  USB: pl2303: initial TIOCGSERIAL support
  USB: option: add Longcheer/Longsung vendor ID
  USB: fix I2C API usage in ohci-pnx4008.
  USB: usbmon: mask seconds properly in text API
  USB: sisusbvga: no unnecessary GFP_ATOMIC
  USB: storage: onetouch: unnecessary GFP_ATOMIC
  USB: serial: ftdi: add CONTEC vendor and product id
  USB: remove references to port->port.count from the serial drivers
  USB: tty: Prune uses of tty_request_room in the USB layer
  USB: tty: Add a function to insert a string of characters with the same flag
  USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration()
  USB: tty: kill request_room for USB ACM class
  USB: tty: sort out the request_room handling for whiteheat
  USB: storage: fix misplaced parenthesis
  USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers
  ...

192 files changed, 7019 insertions, 3331 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 4f5bb5698f5d..6a58cb1330c1 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -21,6 +21,7 @@ config USB_ARCH_HAS_HCD
 	default y if USB_ARCH_HAS_EHCI
 	default y if PCMCIA && !M32R			# sl811_cs
 	default y if ARM				# SL-811
+	default y if BLACKFIN				# SL-811
 	default y if SUPERH				# r8a66597-hcd
 	default PCI
 
@@ -39,6 +40,7 @@ config USB_ARCH_HAS_OHCI
 	default y if ARCH_PNX4008 && I2C
 	default y if MFD_TC6393XB
 	default y if ARCH_W90X900
+	default y if ARCH_DAVINCI_DA8XX
 	# PPC:
 	default y if STB03xxx
 	default y if PPC_MPC52xx
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index be3c9b80bc9f..80b4008c89ba 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
 obj-$(CONFIG_USB_HWA_HCD)	+= host/
 obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
+obj-$(CONFIG_USB_IMX21_HCD)	+= host/
 
 obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
 
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 56802d2e994b..c89990f5e018 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -5,6 +5,7 @@
  *  Copyright (C) 2004 David Woodhouse, Duncan Sands, Roman Kagan
  *  Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru)
  *  Copyright (C) 2007 Simon Arlott
+ *  Copyright (C) 2009 Simon Arlott
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License as published by the Free
@@ -43,7 +44,7 @@
 #include "usbatm.h"
 
 #define DRIVER_AUTHOR	"Roman Kagan, David Woodhouse, Duncan Sands, Simon Arlott"
-#define DRIVER_VERSION	"0.3"
+#define DRIVER_VERSION	"0.4"
 #define DRIVER_DESC	"Conexant AccessRunner ADSL USB modem driver"
 
 static const char cxacru_driver_name[] = "cxacru";
@@ -52,6 +53,7 @@ static const char cxacru_driver_name[] = "cxacru";
 #define CXACRU_EP_DATA		0x02	/* Bulk in/out */
 
 #define CMD_PACKET_SIZE		64	/* Should be maxpacket(ep)? */
+#define CMD_MAX_CONFIG		((CMD_PACKET_SIZE / 4 - 1) / 2)
 
 /* Addresses */
 #define PLLFCLK_ADDR	0x00350068
@@ -105,6 +107,26 @@ enum cxacru_cm_request {
 	CM_REQUEST_MAX,
 };
 
+/* commands for interaction with the flash memory
+ *
+ * read:  response is the contents of the first 60 bytes of flash memory
+ * write: request contains the 60 bytes of data to write to flash memory
+ *        response is the contents of the first 60 bytes of flash memory
+ *
+ * layout: PP PP VV VV  MM MM MM MM  MM MM ?? ??  SS SS SS SS  SS SS SS SS
+ *         SS SS SS SS  SS SS SS SS  00 00 00 00  00 00 00 00  00 00 00 00
+ *         00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00
+ *
+ *   P: le16  USB Product ID
+ *   V: le16  USB Vendor ID
+ *   M: be48  MAC Address
+ *   S: le16  ASCII Serial Number
+ */
+enum cxacru_cm_flash {
+	CM_FLASH_READ = 0xa1,
+	CM_FLASH_WRITE = 0xa2
+};
+
 /* reply codes to the commands above */
 enum cxacru_cm_status {
 	CM_STATUS_UNDEFINED,
@@ -196,23 +218,32 @@ static DEVICE_ATTR(_name, S_IRUGO, cxacru_sysfs_show_##_name, NULL)
 static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, \
 	cxacru_sysfs_show_##_name, cxacru_sysfs_store_##_name)
 
+#define CXACRU_SET_INIT(_name) \
+static DEVICE_ATTR(_name, S_IWUSR, \
+	NULL, cxacru_sysfs_store_##_name)
+
 #define CXACRU_ATTR_INIT(_value, _type, _name) \
 static ssize_t cxacru_sysfs_show_##_name(struct device *dev, \
 	struct device_attribute *attr, char *buf) \
 { \
-	struct usb_interface *intf = to_usb_interface(dev); \
-	struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); \
-	struct cxacru_data *instance = usbatm_instance->driver_data; \
+	struct cxacru_data *instance = to_usbatm_driver_data(\
+		to_usb_interface(dev)); \
+\
+	if (instance == NULL) \
+		return -ENODEV; \
+\
 	return cxacru_sysfs_showattr_##_type(instance->card_info[_value], buf); \
 } \
 CXACRU__ATTR_INIT(_name)
 
 #define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name)
 #define CXACRU_CMD_CREATE(_name)          CXACRU_DEVICE_CREATE_FILE(_name)
+#define CXACRU_SET_CREATE(_name)          CXACRU_DEVICE_CREATE_FILE(_name)
 #define CXACRU__ATTR_CREATE(_name)        CXACRU_DEVICE_CREATE_FILE(_name)
 
 #define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name)
 #define CXACRU_CMD_REMOVE(_name)          CXACRU_DEVICE_REMOVE_FILE(_name)
+#define CXACRU_SET_REMOVE(_name)          CXACRU_DEVICE_REMOVE_FILE(_name)
 #define CXACRU__ATTR_REMOVE(_name)        CXACRU_DEVICE_REMOVE_FILE(_name)
 
 static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf)
@@ -267,12 +298,12 @@ static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf)
 static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf)
 {
 	static char *str[] = {
-			NULL,
+			"",
 			"ANSI T1.413",
 			"ITU-T G.992.1 (G.DMT)",
 			"ITU-T G.992.2 (G.LITE)"
 	};
-	if (unlikely(value >= ARRAY_SIZE(str) || str[value] == NULL))
+	if (unlikely(value >= ARRAY_SIZE(str)))
 		return snprintf(buf, PAGE_SIZE, "%u\n", value);
 	return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
 }
@@ -288,22 +319,28 @@ static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf)
 static ssize_t cxacru_sysfs_show_mac_address(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
-	struct usb_interface *intf = to_usb_interface(dev);
-	struct usbatm_data *usbatm_instance = usb_get_intfdata(intf);
-	struct atm_dev *atm_dev = usbatm_instance->atm_dev;
+	struct cxacru_data *instance = to_usbatm_driver_data(
+			to_usb_interface(dev));
 
-	return snprintf(buf, PAGE_SIZE, "%pM\n", atm_dev->esi);
+	if (instance == NULL || instance->usbatm->atm_dev == NULL)
+		return -ENODEV;
+
+	return snprintf(buf, PAGE_SIZE, "%pM\n",
+		instance->usbatm->atm_dev->esi);
 }
 
 static ssize_t cxacru_sysfs_show_adsl_state(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
-	struct usb_interface *intf = to_usb_interface(dev);
-	struct usbatm_data *usbatm_instance = usb_get_intfdata(intf);
-	struct cxacru_data *instance = usbatm_instance->driver_data;
-	u32 value = instance->card_info[CXINF_LINE_STARTABLE];
-
 	static char *str[] = { "running", "stopped" };
+	struct cxacru_data *instance = to_usbatm_driver_data(
+			to_usb_interface(dev));
+	u32 value;
+
+	if (instance == NULL)
+		return -ENODEV;
+
+	value = instance->card_info[CXINF_LINE_STARTABLE];
 	if (unlikely(value >= ARRAY_SIZE(str)))
 		return snprintf(buf, PAGE_SIZE, "%u\n", value);
 	return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
@@ -312,9 +349,8 @@ static ssize_t cxacru_sysfs_show_adsl_state(struct device *dev,
 static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct usb_interface *intf = to_usb_interface(dev);
-	struct usbatm_data *usbatm_instance = usb_get_intfdata(intf);
-	struct cxacru_data *instance = usbatm_instance->driver_data;
+	struct cxacru_data *instance = to_usbatm_driver_data(
+			to_usb_interface(dev));
 	int ret;
 	int poll = -1;
 	char str_cmd[8];
@@ -328,13 +364,16 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev,
 		return -EINVAL;
 	ret = 0;
 
+	if (instance == NULL)
+		return -ENODEV;
+
 	if (mutex_lock_interruptible(&instance->adsl_state_serialize))
 		return -ERESTARTSYS;
 
 	if (!strcmp(str_cmd, "stop") || !strcmp(str_cmd, "restart")) {
 		ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_STOP, NULL, 0, NULL, 0);
 		if (ret < 0) {
-			atm_err(usbatm_instance, "change adsl state:"
+			atm_err(instance->usbatm, "change adsl state:"
 				" CHIP_ADSL_LINE_STOP returned %d\n", ret);
 
 			ret = -EIO;
@@ -354,7 +393,7 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev,
 	if (!strcmp(str_cmd, "start") || !strcmp(str_cmd, "restart")) {
 		ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
 		if (ret < 0) {
-			atm_err(usbatm_instance, "change adsl state:"
+			atm_err(instance->usbatm, "change adsl state:"
 				" CHIP_ADSL_LINE_START returned %d\n", ret);
 
 			ret = -EIO;
@@ -407,6 +446,72 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev,
 	return ret;
 }
 
+/* CM_REQUEST_CARD_DATA_GET times out, so no show attribute */
+
+static ssize_t cxacru_sysfs_store_adsl_config(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct cxacru_data *instance = to_usbatm_driver_data(
+			to_usb_interface(dev));
+	int len = strlen(buf);
+	int ret, pos, num;
+	__le32 data[CMD_PACKET_SIZE / 4];
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EACCES;
+
+	if (instance == NULL)
+		return -ENODEV;
+
+	pos = 0;
+	num = 0;
+	while (pos < len) {
+		int tmp;
+		u32 index;
+		u32 value;
+
+		ret = sscanf(buf + pos, "%x=%x%n", &index, &value, &tmp);
+		if (ret < 2)
+			return -EINVAL;
+		if (index < 0 || index > 0x7f)
+			return -EINVAL;
+		pos += tmp;
+
+		/* skip trailing newline */
+		if (buf[pos] == '\n' && pos == len-1)
+			pos++;
+
+		data[num * 2 + 1] = cpu_to_le32(index);
+		data[num * 2 + 2] = cpu_to_le32(value);
+		num++;
+
+		/* send config values when data buffer is full
+		 * or no more data
+		 */
+		if (pos >= len || num >= CMD_MAX_CONFIG) {
+			char log[CMD_MAX_CONFIG * 12 + 1]; /* %02x=%08x */
+
+			data[0] = cpu_to_le32(num);
+			ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET,
+				(u8 *) data, 4 + num * 8, NULL, 0);
+			if (ret < 0) {
+				atm_err(instance->usbatm,
+					"set card data returned %d\n", ret);
+				return -EIO;
+			}
+
+			for (tmp = 0; tmp < num; tmp++)
+				snprintf(log + tmp*12, 13, " %02x=%08x",
+					le32_to_cpu(data[tmp * 2 + 1]),
+					le32_to_cpu(data[tmp * 2 + 2]));
+			atm_info(instance->usbatm, "config%s\n", log);
+			num = 0;
+		}
+	}
+
+	return len;
+}
+
 /*
  * All device attributes are included in CXACRU_ALL_FILES
  * so that the same list can be used multiple times:
@@ -442,7 +547,8 @@ CXACRU_ATTR_##_action(CXINF_MODULATION,                MODU, modulation); \
 CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND,              u32,  adsl_headend); \
 CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT,  u32,  adsl_headend_environment); \
 CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION,        u32,  adsl_controller_version); \
-CXACRU_CMD_##_action(                                        adsl_state);
+CXACRU_CMD_##_action(                                        adsl_state); \
+CXACRU_SET_##_action(                                        adsl_config);
 
 CXACRU_ALL_FILES(INIT);
 
@@ -596,7 +702,7 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ
 	len = ret / 4;
 	for (offb = 0; offb < len; ) {
 		int l = le32_to_cpu(buf[offb++]);
-		if (l > stride || l > (len - offb) / 2) {
+		if (l < 0 || l > stride || l > (len - offb) / 2) {
 			if (printk_ratelimit())
 				usb_err(instance->usbatm, "invalid data length from cm %#x: %d\n",
 					cm, l);
@@ -649,9 +755,6 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
 {
 	struct cxacru_data *instance = usbatm_instance->driver_data;
 	struct usb_interface *intf = usbatm_instance->usb_intf;
-	/*
-	struct atm_dev *atm_dev = usbatm_instance->atm_dev;
-	*/
 	int ret;
 	int start_polling = 1;
 
@@ -697,6 +800,9 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
 	mutex_unlock(&instance->poll_state_serialize);
 	mutex_unlock(&instance->adsl_state_serialize);
 
+	printk(KERN_INFO "%s%d: %s %pM\n", atm_dev->type, atm_dev->number,
+			usbatm_instance->description, atm_dev->esi);
+
 	if (start_polling)
 		cxacru_poll_status(&instance->poll_work.work);
 	return 0;
@@ -873,11 +979,9 @@ cleanup:
 
 static void cxacru_upload_firmware(struct cxacru_data *instance,
 				   const struct firmware *fw,
-				   const struct firmware *bp,
-				   const struct firmware *cf)
+				   const struct firmware *bp)
 {
 	int ret;
-	int off;
 	struct usbatm_data *usbatm = instance->usbatm;
 	struct usb_device *usb_dev = usbatm->usb_dev;
 	__le16 signature[] = { usb_dev->descriptor.idVendor,
@@ -911,6 +1015,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
 	}
 
 	/* Firmware */
+	usb_info(usbatm, "loading firmware\n");
 	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size);
 	if (ret) {
 		usb_err(usbatm, "Firmware upload failed: %d\n", ret);
@@ -919,6 +1024,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
 
 	/* Boot ROM patch */
 	if (instance->modem_type->boot_rom_patch) {
+		usb_info(usbatm, "loading boot ROM patch\n");
 		ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size);
 		if (ret) {
 			usb_err(usbatm, "Boot ROM patching failed: %d\n", ret);
@@ -933,6 +1039,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
 		return;
 	}
 
+	usb_info(usbatm, "starting device\n");
 	if (instance->modem_type->boot_rom_patch) {
 		val = cpu_to_le32(BR_ADDR);
 		ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4);
@@ -958,26 +1065,6 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
 		usb_err(usbatm, "modem failed to initialize: %d\n", ret);
 		return;
 	}
-
-	/* Load config data (le32), doing one packet at a time */
-	if (cf)
-		for (off = 0; off < cf->size / 4; ) {
-			__le32 buf[CMD_PACKET_SIZE / 4 - 1];
-			int i, len = min_t(int, cf->size / 4 - off, CMD_PACKET_SIZE / 4 / 2 - 1);
-			buf[0] = cpu_to_le32(len);
-			for (i = 0; i < len; i++, off++) {
-				buf[i * 2 + 1] = cpu_to_le32(off);
-				memcpy(buf + i * 2 + 2, cf->data + off * 4, 4);
-			}
-			ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET,
-					(u8 *) buf, len, NULL, 0);
-			if (ret < 0) {
-				usb_err(usbatm, "load config data failed: %d\n", ret);
-				return;
-			}
-		}
-
-	msleep_interruptible(4000);
 }
 
 static int cxacru_find_firmware(struct cxacru_data *instance,
@@ -1003,7 +1090,7 @@ static int cxacru_find_firmware(struct cxacru_data *instance,
 static int cxacru_heavy_init(struct usbatm_data *usbatm_instance,
 			     struct usb_interface *usb_intf)
 {
-	const struct firmware *fw, *bp, *cf;
+	const struct firmware *fw, *bp;
 	struct cxacru_data *instance = usbatm_instance->driver_data;
 
 	int ret = cxacru_find_firmware(instance, "fw", &fw);
@@ -1021,13 +1108,8 @@ static int cxacru_heavy_init(struct usbatm_data *usbatm_instance,
 		}
 	}
 
-	if (cxacru_find_firmware(instance, "cf", &cf))		/* optional */
-		cf = NULL;
-
-	cxacru_upload_firmware(instance, fw, bp, cf);
+	cxacru_upload_firmware(instance, fw, bp);
 
-	if (cf)
-		release_firmware(cf);
 	if (instance->modem_type->boot_rom_patch)
 		release_firmware(bp);
 	release_firmware(fw);
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index fbea8563df1e..9b53e8df4648 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -1333,6 +1333,7 @@ void usbatm_usb_disconnect(struct usb_interface *intf)
 	if (instance->atm_dev) {
 		sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device");
 		atm_dev_deregister(instance->atm_dev);
+		instance->atm_dev = NULL;
 	}
 
 	usbatm_put_instance(instance);	/* taken in usbatm_usb_probe */
@@ -1348,7 +1349,7 @@ static int __init usbatm_usb_init(void)
 {
 	dbg("%s: driver version %s", __func__, DRIVER_VERSION);
 
-	if (sizeof(struct usbatm_control) > sizeof(((struct sk_buff *) 0)->cb)) {
+	if (sizeof(struct usbatm_control) > FIELD_SIZEOF(struct sk_buff, cb)) {
 		printk(KERN_ERR "%s unusable with this kernel!\n", usbatm_driver_name);
 		return -EIO;
 	}
diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h
index f6f4508a9d42..0863f85fcc26 100644
--- a/drivers/usb/atm/usbatm.h
+++ b/drivers/usb/atm/usbatm.h
@@ -204,4 +204,19 @@ struct usbatm_data {
 	struct urb *urbs[0];
 };
 
+static inline void *to_usbatm_driver_data(struct usb_interface *intf)
+{
+	struct usbatm_data *usbatm_instance;
+
+	if (intf == NULL)
+		return NULL;
+
+	usbatm_instance = usb_get_intfdata(intf);
+
+	if (usbatm_instance == NULL) /* set NULL before unbind() */
+		return NULL;
+
+	return usbatm_instance->driver_data; /* set NULL after unbind() */
+}
+
 #endif	/* _USBATM_H_ */
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
index 5633bc5c8bf2..029ee4a8a1f3 100644
--- a/drivers/usb/c67x00/c67x00-drv.c
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -137,13 +137,13 @@ static int __devinit c67x00_drv_probe(struct platform_device *pdev)
 	if (!c67x00)
 		return -ENOMEM;
 
-	if (!request_mem_region(res->start, res->end - res->start + 1,
+	if (!request_mem_region(res->start, resource_size(res),
 				pdev->name)) {
 		dev_err(&pdev->dev, "Memory region busy\n");
 		ret = -EBUSY;
 		goto request_mem_failed;
 	}
-	c67x00->hpi.base = ioremap(res->start, res->end - res->start + 1);
+	c67x00->hpi.base = ioremap(res->start, resource_size(res));
 	if (!c67x00->hpi.base) {
 		dev_err(&pdev->dev, "Unable to map HPI registers\n");
 		ret = -EIO;
@@ -182,7 +182,7 @@ static int __devinit c67x00_drv_probe(struct platform_device *pdev)
  request_irq_failed:
 	iounmap(c67x00->hpi.base);
  map_failed:
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
  request_mem_failed:
 	kfree(c67x00);
 
@@ -208,7 +208,7 @@ static int __devexit c67x00_drv_remove(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res)
-		release_mem_region(res->start, res->end - res->start + 1);
+		release_mem_region(res->start, resource_size(res));
 
 	kfree(c67x00);
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 34d4eb98829e..975d556b4787 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -170,6 +170,7 @@ static void acm_write_done(struct acm *acm, struct acm_wb *wb)
 {
 	wb->use = 0;
 	acm->transmitting--;
+	usb_autopm_put_interface_async(acm->control);
 }
 
 /*
@@ -211,9 +212,12 @@ static int acm_write_start(struct acm *acm, int wbn)
 	}
 
 	dbg("%s susp_count: %d", __func__, acm->susp_count);
+	usb_autopm_get_interface_async(acm->control);
 	if (acm->susp_count) {
-		acm->delayed_wb = wb;
-		schedule_work(&acm->waker);
+		if (!acm->delayed_wb)
+			acm->delayed_wb = wb;
+		else
+			usb_autopm_put_interface_async(acm->control);
 		spin_unlock_irqrestore(&acm->write_lock, flags);
 		return 0;	/* A white lie */
 	}
@@ -424,7 +428,6 @@ next_buffer:
 		throttled = acm->throttle;
 		spin_unlock_irqrestore(&acm->throttle_lock, flags);
 		if (!throttled) {
-			tty_buffer_request_room(tty, buf->size);
 			tty_insert_flip_string(tty, buf->base, buf->size);
 			tty_flip_buffer_push(tty);
 		} else {
@@ -534,23 +537,6 @@ static void acm_softint(struct work_struct *work)
 	tty_kref_put(tty);
 }
 
-static void acm_waker(struct work_struct *waker)
-{
-	struct acm *acm = container_of(waker, struct acm, waker);
-	int rv;
-
-	rv = usb_autopm_get_interface(acm->control);
-	if (rv < 0) {
-		dev_err(&acm->dev->dev, "Autopm failure in %s\n", __func__);
-		return;
-	}
-	if (acm->delayed_wb) {
-		acm_start_wb(acm, acm->delayed_wb);
-		acm->delayed_wb = NULL;
-	}
-	usb_autopm_put_interface(acm->control);
-}
-
 /*
  * TTY handlers
  */
@@ -566,7 +552,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 
 	acm = acm_table[tty->index];
 	if (!acm || !acm->dev)
-		goto err_out;
+		goto out;
 	else
 		rv = 0;
 
@@ -582,8 +568,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 
 	mutex_lock(&acm->mutex);
 	if (acm->port.count++) {
+		mutex_unlock(&acm->mutex);
 		usb_autopm_put_interface(acm->control);
-		goto done;
+		goto out;
 	}
 
 	acm->ctrlurb->dev = acm->dev;
@@ -612,18 +599,18 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	set_bit(ASYNCB_INITIALIZED, &acm->port.flags);
 	rv = tty_port_block_til_ready(&acm->port, tty, filp);
 	tasklet_schedule(&acm->urb_task);
-done:
+
 	mutex_unlock(&acm->mutex);
-err_out:
+out:
 	mutex_unlock(&open_mutex);
 	return rv;
 
 full_bailout:
 	usb_kill_urb(acm->ctrlurb);
 bail_out:
-	usb_autopm_put_interface(acm->control);
 	acm->port.count--;
 	mutex_unlock(&acm->mutex);
+	usb_autopm_put_interface(acm->control);
 early_bail:
 	mutex_unlock(&open_mutex);
 	tty_port_tty_set(&acm->port, NULL);
@@ -1023,7 +1010,7 @@ static int acm_probe(struct usb_interface *intf,
 		case USB_CDC_CALL_MANAGEMENT_TYPE:
 			call_management_function = buffer[3];
 			call_interface_num = buffer[4];
-			if ((call_management_function & 3) != 3)
+			if ( (quirks & NOT_A_MODEM) == 0 && (call_management_function & 3) != 3)
 				dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n");
 			break;
 		default:
@@ -1178,7 +1165,6 @@ made_compressed_probe:
 	acm->urb_task.func = acm_rx_tasklet;
 	acm->urb_task.data = (unsigned long) acm;
 	INIT_WORK(&acm->work, acm_softint);
-	INIT_WORK(&acm->waker, acm_waker);
 	init_waitqueue_head(&acm->drain_wait);
 	spin_lock_init(&acm->throttle_lock);
 	spin_lock_init(&acm->write_lock);
@@ -1343,7 +1329,6 @@ static void stop_data_traffic(struct acm *acm)
 	tasklet_enable(&acm->urb_task);
 
 	cancel_work_sync(&acm->work);
-	cancel_work_sync(&acm->waker);
 }
 
 static void acm_disconnect(struct usb_interface *intf)
@@ -1435,6 +1420,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
 static int acm_resume(struct usb_interface *intf)
 {
 	struct acm *acm = usb_get_intfdata(intf);
+	struct acm_wb *wb;
 	int rv = 0;
 	int cnt;
 
@@ -1449,6 +1435,21 @@ static int acm_resume(struct usb_interface *intf)
 	mutex_lock(&acm->mutex);
 	if (acm->port.count) {
 		rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO);
+
+		spin_lock_irq(&acm->write_lock);
+		if (acm->delayed_wb) {
+			wb = acm->delayed_wb;
+			acm->delayed_wb = NULL;
+			spin_unlock_irq(&acm->write_lock);
+			acm_start_wb(acm, acm->delayed_wb);
+		} else {
+			spin_unlock_irq(&acm->write_lock);
+		}
+
+		/*
+		 * delayed error checking because we must
+		 * do the write path at all cost
+		 */
 		if (rv < 0)
 			goto err_out;
 
@@ -1460,6 +1461,23 @@ err_out:
 	return rv;
 }
 
+static int acm_reset_resume(struct usb_interface *intf)
+{
+	struct acm *acm = usb_get_intfdata(intf);
+	struct tty_struct *tty;
+
+	mutex_lock(&acm->mutex);
+	if (acm->port.count) {
+		tty = tty_port_tty_get(&acm->port);
+		if (tty) {
+			tty_hangup(tty);
+			tty_kref_put(tty);
+		}
+	}
+	mutex_unlock(&acm->mutex);
+	return acm_resume(intf);
+}
+
 #endif /* CONFIG_PM */
 
 #define NOKIA_PCSUITE_ACM_INFO(x) \
@@ -1471,7 +1489,7 @@ err_out:
  * USB driver structure.
  */
 
-static struct usb_device_id acm_ids[] = {
+static const struct usb_device_id acm_ids[] = {
 	/* quirky and broken devices */
 	{ USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
@@ -1576,6 +1594,11 @@ static struct usb_device_id acm_ids[] = {
 
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 
+	/* Support Lego NXT using pbLua firmware */
+	{ USB_DEVICE(0x0694, 0xff00),
+	.driver_info = NOT_A_MODEM,
+       	},
+
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_V25TER) },
@@ -1602,6 +1625,7 @@ static struct usb_driver acm_driver = {
 #ifdef CONFIG_PM
 	.suspend =	acm_suspend,
 	.resume =	acm_resume,
+	.reset_resume =	acm_reset_resume,
 #endif
 	.id_table =	acm_ids,
 #ifdef CONFIG_PM
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index c4a0ee8ffccf..4a8e87ec6ce9 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -112,7 +112,6 @@ struct acm {
 	struct mutex mutex;
 	struct usb_cdc_line_coding line;		/* bits, stop, parity */
 	struct work_struct work;			/* work queue entry for line discipline waking up */
-	struct work_struct waker;
 	wait_queue_head_t drain_wait;			/* close processing */
 	struct tasklet_struct urb_task;                 /* rx processing */
 	spinlock_t throttle_lock;			/* synchronize throtteling and read callback */
@@ -137,3 +136,4 @@ struct acm {
 #define NO_UNION_NORMAL			1
 #define SINGLE_RX_URB			2
 #define NO_CAP_LINE			4
+#define NOT_A_MODEM			8
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 3e564bfe17d1..18aafcb08fc8 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -31,7 +31,7 @@
 #define DRIVER_AUTHOR "Oliver Neukum"
 #define DRIVER_DESC "USB Abstract Control Model driver for USB WCM Device Management"
 
-static struct usb_device_id wdm_ids[] = {
+static const struct usb_device_id wdm_ids[] = {
 	{
 		.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
 				 USB_DEVICE_ID_MATCH_INT_SUBCLASS,
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 9bc112ee7803..93b5f85d7ceb 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -163,7 +163,6 @@ struct usblp {
 	unsigned char		used;			/* True if open */
 	unsigned char		present;		/* True if not disconnected */
 	unsigned char		bidir;			/* interface is bidirectional */
-	unsigned char		sleeping;		/* interface is suspended */
 	unsigned char		no_paper;		/* Paper Out happened */
 	unsigned char		*device_id_string;	/* IEEE 1284 DEVICE ID string (ptr) */
 							/* first 2 bytes are (big-endian) length */
@@ -191,7 +190,6 @@ static void usblp_dump(struct usblp *usblp) {
 	dbg("quirks=%d", usblp->quirks);
 	dbg("used=%d", usblp->used);
 	dbg("bidir=%d", usblp->bidir);
-	dbg("sleeping=%d", usblp->sleeping);
 	dbg("device_id_string=\"%s\"",
 		usblp->device_id_string ?
 			usblp->device_id_string + 2 :
@@ -376,7 +374,7 @@ static int usblp_check_status(struct usblp *usblp, int err)
 
 static int handle_bidir (struct usblp *usblp)
 {
-	if (usblp->bidir && usblp->used && !usblp->sleeping) {
+	if (usblp->bidir && usblp->used) {
 		if (usblp_submit_read(usblp) < 0)
 			return -EIO;
 	}
@@ -503,11 +501,6 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		goto done;
 	}
 
-	if (usblp->sleeping) {
-		retval = -ENODEV;
-		goto done;
-	}
-
 	dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd),
 		_IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd) );
 
@@ -914,8 +907,6 @@ static int usblp_wtest(struct usblp *usblp, int nonblock)
 		return 0;
 	}
 	spin_unlock_irqrestore(&usblp->lock, flags);
-	if (usblp->sleeping)
-		return -ENODEV;
 	if (nonblock)
 		return -EAGAIN;
 	return 1;
@@ -968,8 +959,6 @@ static int usblp_rtest(struct usblp *usblp, int nonblock)
 		return 0;
 	}
 	spin_unlock_irqrestore(&usblp->lock, flags);
-	if (usblp->sleeping)
-		return -ENODEV;
 	if (nonblock)
 		return -EAGAIN;
 	return 1;
@@ -1377,12 +1366,10 @@ static void usblp_disconnect(struct usb_interface *intf)
 	mutex_unlock (&usblp_mutex);
 }
 
-static int usblp_suspend (struct usb_interface *intf, pm_message_t message)
+static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct usblp *usblp = usb_get_intfdata (intf);
 
-	/* we take no more IO */
-	usblp->sleeping = 1;
 	usblp_unlink_urbs(usblp);
 #if 0 /* XXX Do we want this? What if someone is reading, should we fail? */
 	/* not strictly necessary, but just in case */
@@ -1393,18 +1380,17 @@ static int usblp_suspend (struct usb_interface *intf, pm_message_t message)
 	return 0;
 }
 
-static int usblp_resume (struct usb_interface *intf)
+static int usblp_resume(struct usb_interface *intf)
 {
 	struct usblp *usblp = usb_get_intfdata (intf);
 	int r;
 
-	usblp->sleeping = 0;
 	r = handle_bidir (usblp);
 
 	return r;
 }
 
-static struct usb_device_id usblp_ids [] = {
+static const struct usb_device_id usblp_ids[] = {
 	{ USB_DEVICE_INFO(7, 1, 1) },
 	{ USB_DEVICE_INFO(7, 1, 2) },
 	{ USB_DEVICE_INFO(7, 1, 3) },
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 7c5f4e32c920..8588c0937a89 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -48,7 +48,7 @@
  */
 #define USBTMC_MAX_READS_TO_CLEAR_BULK_IN	100
 
-static struct usb_device_id usbtmc_devices[] = {
+static const struct usb_device_id usbtmc_devices[] = {
 	{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
 	{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 1), },
 	{ 0, } /* terminating entry */
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index ad925946f869..97a819c23ef3 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -91,8 +91,8 @@ config USB_DYNAMIC_MINORS
 	  If you are unsure about this, say N here.
 
 config USB_SUSPEND
-	bool "USB selective suspend/resume and wakeup"
-	depends on USB && PM
+	bool "USB runtime power management (suspend/resume and wakeup)"
+	depends on USB && PM_RUNTIME
 	help
 	  If you say Y here, you can use driver calls or the sysfs
 	  "power/level" file to suspend or resume individual USB
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 355dffcc23b0..c83c975152a6 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -118,6 +118,7 @@ static const char *format_endpt =
  */
 
 static DECLARE_WAIT_QUEUE_HEAD(deviceconndiscwq);
+/* guarded by usbfs_mutex */
 static unsigned int conndiscevcnt;
 
 /* this struct stores the poll state for <mountpoint>/devices pollers */
@@ -156,7 +157,9 @@ static const struct class_info clas_info[] =
 
 void usbfs_conn_disc_event(void)
 {
+	mutex_lock(&usbfs_mutex);
 	conndiscevcnt++;
+	mutex_unlock(&usbfs_mutex);
 	wake_up(&deviceconndiscwq);
 }
 
@@ -629,42 +632,29 @@ static ssize_t usb_device_read(struct file *file, char __user *buf,
 static unsigned int usb_device_poll(struct file *file,
 				    struct poll_table_struct *wait)
 {
-	struct usb_device_status *st = file->private_data;
+	struct usb_device_status *st;
 	unsigned int mask = 0;
 
-	lock_kernel();
+	mutex_lock(&usbfs_mutex);
+	st = file->private_data;
 	if (!st) {
 		st = kmalloc(sizeof(struct usb_device_status), GFP_KERNEL);
-
-		/* we may have dropped BKL -
-		 * need to check for having lost the race */
-		if (file->private_data) {
-			kfree(st);
-			st = file->private_data;
-			goto lost_race;
-		}
-		/* we haven't lost - check for allocation failure now */
 		if (!st) {
-			unlock_kernel();
+			mutex_unlock(&usbfs_mutex);
 			return POLLIN;
 		}
 
-		/*
-		 * need to prevent the module from being unloaded, since
-		 * proc_unregister does not call the release method and
-		 * we would have a memory leak
-		 */
 		st->lastev = conndiscevcnt;
 		file->private_data = st;
 		mask = POLLIN;
 	}
-lost_race:
+
 	if (file->f_mode & FMODE_READ)
 		poll_wait(file, &deviceconndiscwq, wait);
 	if (st->lastev != conndiscevcnt)
 		mask |= POLLIN;
 	st->lastev = conndiscevcnt;
-	unlock_kernel();
+	mutex_unlock(&usbfs_mutex);
 	return mask;
 }
 
@@ -685,7 +675,7 @@ static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig)
 {
 	loff_t ret;
 
-	lock_kernel();
+	mutex_lock(&file->f_dentry->d_inode->i_mutex);
 
 	switch (orig) {
 	case 0:
@@ -701,7 +691,7 @@ static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig)
 		ret = -EINVAL;
 	}
 
-	unlock_kernel();
+	mutex_unlock(&file->f_dentry->d_inode->i_mutex);
 	return ret;
 }
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index a678186f218f..e909ff7b9094 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -122,7 +122,7 @@ static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig)
 {
 	loff_t ret;
 
-	lock_kernel();
+	mutex_lock(&file->f_dentry->d_inode->i_mutex);
 
 	switch (orig) {
 	case 0:
@@ -138,7 +138,7 @@ static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig)
 		ret = -EINVAL;
 	}
 
-	unlock_kernel();
+	mutex_unlock(&file->f_dentry->d_inode->i_mutex);
 	return ret;
 }
 
@@ -310,7 +310,8 @@ static struct async *async_getpending(struct dev_state *ps,
 
 static void snoop_urb(struct usb_device *udev,
 		void __user *userurb, int pipe, unsigned length,
-		int timeout_or_status, enum snoop_when when)
+		int timeout_or_status, enum snoop_when when,
+		unsigned char *data, unsigned data_len)
 {
 	static const char *types[] = {"isoc", "int", "ctrl", "bulk"};
 	static const char *dirs[] = {"out", "in"};
@@ -344,6 +345,11 @@ static void snoop_urb(struct usb_device *udev,
 					"status %d\n",
 					ep, t, d, length, timeout_or_status);
 	}
+
+	if (data && data_len > 0) {
+		print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1,
+			data, data_len, 1);
+	}
 }
 
 #define AS_CONTINUATION	1
@@ -410,7 +416,9 @@ static void async_completed(struct urb *urb)
 	}
 	snoop(&urb->dev->dev, "urb complete\n");
 	snoop_urb(urb->dev, as->userurb, urb->pipe, urb->actual_length,
-			as->status, COMPLETE);
+			as->status, COMPLETE,
+			((urb->transfer_flags & URB_DIR_MASK) == USB_DIR_OUT) ?
+				NULL : urb->transfer_buffer, urb->actual_length);
 	if (as->status < 0 && as->bulk_addr && as->status != -ECONNRESET &&
 			as->status != -ENOENT)
 		cancel_bulk_urbs(ps, as->bulk_addr);
@@ -653,20 +661,20 @@ static int usbdev_open(struct inode *inode, struct file *file)
 	const struct cred *cred = current_cred();
 	int ret;
 
-	lock_kernel();
-	/* Protect against simultaneous removal or release */
-	mutex_lock(&usbfs_mutex);
-
 	ret = -ENOMEM;
 	ps = kmalloc(sizeof(struct dev_state), GFP_KERNEL);
 	if (!ps)
-		goto out;
+		goto out_free_ps;
 
 	ret = -ENODEV;
 
+	/* Protect against simultaneous removal or release */
+	mutex_lock(&usbfs_mutex);
+
 	/* usbdev device-node */
 	if (imajor(inode) == USB_DEVICE_MAJOR)
 		dev = usbdev_lookup_by_devt(inode->i_rdev);
+
 #ifdef CONFIG_USB_DEVICEFS
 	/* procfs file */
 	if (!dev) {
@@ -678,13 +686,19 @@ static int usbdev_open(struct inode *inode, struct file *file)
 			dev = NULL;
 	}
 #endif
-	if (!dev || dev->state == USB_STATE_NOTATTACHED)
-		goto out;
+	mutex_unlock(&usbfs_mutex);
+
+	if (!dev)
+		goto out_free_ps;
+
+	usb_lock_device(dev);
+	if (dev->state == USB_STATE_NOTATTACHED)
+		goto out_unlock_device;
+
 	ret = usb_autoresume_device(dev);
 	if (ret)
-		goto out;
+		goto out_unlock_device;
 
-	ret = 0;
 	ps->dev = dev;
 	ps->file = file;
 	spin_lock_init(&ps->lock);
@@ -702,15 +716,16 @@ static int usbdev_open(struct inode *inode, struct file *file)
 	smp_wmb();
 	list_add_tail(&ps->list, &dev->filelist);
 	file->private_data = ps;
+	usb_unlock_device(dev);
 	snoop(&dev->dev, "opened by process %d: %s\n", task_pid_nr(current),
 			current->comm);
- out:
-	if (ret) {
-		kfree(ps);
-		usb_put_dev(dev);
-	}
-	mutex_unlock(&usbfs_mutex);
-	unlock_kernel();
+	return ret;
+
+ out_unlock_device:
+	usb_unlock_device(dev);
+	usb_put_dev(dev);
+ out_free_ps:
+	kfree(ps);
 	return ret;
 }
 
@@ -724,10 +739,7 @@ static int usbdev_release(struct inode *inode, struct file *file)
 	usb_lock_device(dev);
 	usb_hub_release_all_ports(dev, ps);
 
-	/* Protect against simultaneous open */
-	mutex_lock(&usbfs_mutex);
 	list_del_init(&ps->list);
-	mutex_unlock(&usbfs_mutex);
 
 	for (ifnum = 0; ps->ifclaimed && ifnum < 8*sizeof(ps->ifclaimed);
 			ifnum++) {
@@ -770,6 +782,13 @@ static int proc_control(struct dev_state *ps, void __user *arg)
 	if (!tbuf)
 		return -ENOMEM;
 	tmo = ctrl.timeout;
+	snoop(&dev->dev, "control urb: bRequestType=%02x "
+		"bRequest=%02x wValue=%04x "
+		"wIndex=%04x wLength=%04x\n",
+		ctrl.bRequestType, ctrl.bRequest,
+		__le16_to_cpup(&ctrl.wValue),
+		__le16_to_cpup(&ctrl.wIndex),
+		__le16_to_cpup(&ctrl.wLength));
 	if (ctrl.bRequestType & 0x80) {
 		if (ctrl.wLength && !access_ok(VERIFY_WRITE, ctrl.data,
 					       ctrl.wLength)) {
@@ -777,15 +796,15 @@ static int proc_control(struct dev_state *ps, void __user *arg)
 			return -EINVAL;
 		}
 		pipe = usb_rcvctrlpipe(dev, 0);
-		snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT);
+		snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT, NULL, 0);
 
 		usb_unlock_device(dev);
 		i = usb_control_msg(dev, pipe, ctrl.bRequest,
 				    ctrl.bRequestType, ctrl.wValue, ctrl.wIndex,
 				    tbuf, ctrl.wLength, tmo);
 		usb_lock_device(dev);
-		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE);
-
+		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE,
+			tbuf, i);
 		if ((i > 0) && ctrl.wLength) {
 			if (copy_to_user(ctrl.data, tbuf, i)) {
 				free_page((unsigned long)tbuf);
@@ -800,14 +819,15 @@ static int proc_control(struct dev_state *ps, void __user *arg)
 			}
 		}
 		pipe = usb_sndctrlpipe(dev, 0);
-		snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT);
+		snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT,
+			tbuf, ctrl.wLength);
 
 		usb_unlock_device(dev);
 		i = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ctrl.bRequest,
 				    ctrl.bRequestType, ctrl.wValue, ctrl.wIndex,
 				    tbuf, ctrl.wLength, tmo);
 		usb_lock_device(dev);
-		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE);
+		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE, NULL, 0);
 	}
 	free_page((unsigned long)tbuf);
 	if (i < 0 && i != -EPIPE) {
@@ -853,12 +873,12 @@ static int proc_bulk(struct dev_state *ps, void __user *arg)
 			kfree(tbuf);
 			return -EINVAL;
 		}
-		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT);
+		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, NULL, 0);
 
 		usb_unlock_device(dev);
 		i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
 		usb_lock_device(dev);
-		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE);
+		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, tbuf, len2);
 
 		if (!i && len2) {
 			if (copy_to_user(bulk.data, tbuf, len2)) {
@@ -873,12 +893,12 @@ static int proc_bulk(struct dev_state *ps, void __user *arg)
 				return -EFAULT;
 			}
 		}
-		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT);
+		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, tbuf, len1);
 
 		usb_unlock_device(dev);
 		i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
 		usb_lock_device(dev);
-		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE);
+		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, NULL, 0);
 	}
 	kfree(tbuf);
 	if (i < 0)
@@ -1097,6 +1117,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			is_in = 0;
 			uurb->endpoint &= ~USB_DIR_IN;
 		}
+		snoop(&ps->dev->dev, "control urb: bRequestType=%02x "
+			"bRequest=%02x wValue=%04x "
+			"wIndex=%04x wLength=%04x\n",
+			dr->bRequestType, dr->bRequest,
+			__le16_to_cpup(&dr->wValue),
+			__le16_to_cpup(&dr->wIndex),
+			__le16_to_cpup(&dr->wLength));
 		break;
 
 	case USBDEVFS_URB_TYPE_BULK:
@@ -1104,13 +1131,25 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 		case USB_ENDPOINT_XFER_CONTROL:
 		case USB_ENDPOINT_XFER_ISOC:
 			return -EINVAL;
-		/* allow single-shot interrupt transfers, at bogus rates */
+		case USB_ENDPOINT_XFER_INT:
+			/* allow single-shot interrupt transfers */
+			uurb->type = USBDEVFS_URB_TYPE_INTERRUPT;
+			goto interrupt_urb;
 		}
 		uurb->number_of_packets = 0;
 		if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
 			return -EINVAL;
 		break;
 
+	case USBDEVFS_URB_TYPE_INTERRUPT:
+		if (!usb_endpoint_xfer_int(&ep->desc))
+			return -EINVAL;
+ interrupt_urb:
+		uurb->number_of_packets = 0;
+		if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
+			return -EINVAL;
+		break;
+
 	case USBDEVFS_URB_TYPE_ISO:
 		/* arbitrary limit */
 		if (uurb->number_of_packets < 1 ||
@@ -1143,14 +1182,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 		uurb->buffer_length = totlen;
 		break;
 
-	case USBDEVFS_URB_TYPE_INTERRUPT:
-		uurb->number_of_packets = 0;
-		if (!usb_endpoint_xfer_int(&ep->desc))
-			return -EINVAL;
-		if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
-			return -EINVAL;
-		break;
-
 	default:
 		return -EINVAL;
 	}
@@ -1236,7 +1267,9 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 		}
 	}
 	snoop_urb(ps->dev, as->userurb, as->urb->pipe,
-			as->urb->transfer_buffer_length, 0, SUBMIT);
+			as->urb->transfer_buffer_length, 0, SUBMIT,
+			is_in ? NULL : as->urb->transfer_buffer,
+				uurb->buffer_length);
 	async_newpending(as);
 
 	if (usb_endpoint_xfer_bulk(&ep->desc)) {
@@ -1274,7 +1307,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 		dev_printk(KERN_DEBUG, &ps->dev->dev,
 			   "usbfs: usb_submit_urb returned %d\n", ret);
 		snoop_urb(ps->dev, as->userurb, as->urb->pipe,
-				0, ret, COMPLETE);
+				0, ret, COMPLETE, NULL, 0);
 		async_removepending(as);
 		free_async(as);
 		return ret;
@@ -1628,7 +1661,10 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl)
 		if (driver == NULL || driver->ioctl == NULL) {
 			retval = -ENOTTY;
 		} else {
+			/* keep API that guarantees BKL */
+			lock_kernel();
 			retval = driver->ioctl(intf, ctl->ioctl_code, buf);
+			unlock_kernel();
 			if (retval == -ENOIOCTLCMD)
 				retval = -ENOTTY;
 		}
@@ -1711,6 +1747,7 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd,
 
 	if (!(file->f_mode & FMODE_WRITE))
 		return -EPERM;
+
 	usb_lock_device(dev);
 	if (!connected(ps)) {
 		usb_unlock_device(dev);
@@ -1877,9 +1914,7 @@ static long usbdev_ioctl(struct file *file, unsigned int cmd,
 {
 	int ret;
 
-	lock_kernel();
 	ret = usbdev_do_ioctl(file, cmd, (void __user *)arg);
-	unlock_kernel();
 
 	return ret;
 }
@@ -1890,9 +1925,7 @@ static long usbdev_compat_ioctl(struct file *file, unsigned int cmd,
 {
 	int ret;
 
-	lock_kernel();
 	ret = usbdev_do_ioctl(file, cmd, compat_ptr(arg));
-	unlock_kernel();
 
 	return ret;
 }
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index f2f055eb6831..a7037bf81688 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -25,7 +25,7 @@
 #include <linux/device.h>
 #include <linux/usb.h>
 #include <linux/usb/quirks.h>
-#include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
 #include "hcd.h"
 #include "usb.h"
 
@@ -221,7 +221,7 @@ static int usb_probe_device(struct device *dev)
 {
 	struct usb_device_driver *udriver = to_usb_device_driver(dev->driver);
 	struct usb_device *udev = to_usb_device(dev);
-	int error = -ENODEV;
+	int error = 0;
 
 	dev_dbg(dev, "%s\n", __func__);
 
@@ -230,18 +230,23 @@ static int usb_probe_device(struct device *dev)
 	/* The device should always appear to be in use
 	 * unless the driver suports autosuspend.
 	 */
-	udev->pm_usage_cnt = !(udriver->supports_autosuspend);
+	if (!udriver->supports_autosuspend)
+		error = usb_autoresume_device(udev);
 
-	error = udriver->probe(udev);
+	if (!error)
+		error = udriver->probe(udev);
 	return error;
 }
 
 /* called from driver core with dev locked */
 static int usb_unbind_device(struct device *dev)
 {
+	struct usb_device *udev = to_usb_device(dev);
 	struct usb_device_driver *udriver = to_usb_device_driver(dev->driver);
 
-	udriver->disconnect(to_usb_device(dev));
+	udriver->disconnect(udev);
+	if (!udriver->supports_autosuspend)
+		usb_autosuspend_device(udev);
 	return 0;
 }
 
@@ -274,60 +279,62 @@ static int usb_probe_interface(struct device *dev)
 	intf->needs_binding = 0;
 
 	if (usb_device_is_owned(udev))
-		return -ENODEV;
+		return error;
 
 	if (udev->authorized == 0) {
 		dev_err(&intf->dev, "Device is not authorized for usage\n");
-		return -ENODEV;
+		return error;
 	}
 
 	id = usb_match_id(intf, driver->id_table);
 	if (!id)
 		id = usb_match_dynamic_id(intf, driver);
-	if (id) {
-		dev_dbg(dev, "%s - got id\n", __func__);
-
-		error = usb_autoresume_device(udev);
-		if (error)
-			return error;
+	if (!id)
+		return error;
 
-		/* Interface "power state" doesn't correspond to any hardware
-		 * state whatsoever.  We use it to record when it's bound to
-		 * a driver that may start I/0:  it's not frozen/quiesced.
-		 */
-		mark_active(intf);
-		intf->condition = USB_INTERFACE_BINDING;
+	dev_dbg(dev, "%s - got id\n", __func__);
 
-		/* The interface should always appear to be in use
-		 * unless the driver suports autosuspend.
-		 */
-		atomic_set(&intf->pm_usage_cnt, !driver->supports_autosuspend);
-
-		/* Carry out a deferred switch to altsetting 0 */
-		if (intf->needs_altsetting0) {
-			error = usb_set_interface(udev, intf->altsetting[0].
-					desc.bInterfaceNumber, 0);
-			if (error < 0)
-				goto err;
+	error = usb_autoresume_device(udev);
+	if (error)
+		return error;
 
-			intf->needs_altsetting0 = 0;
-		}
+	intf->condition = USB_INTERFACE_BINDING;
 
-		error = driver->probe(intf, id);
-		if (error)
+	/* Bound interfaces are initially active.  They are
+	 * runtime-PM-enabled only if the driver has autosuspend support.
+	 * They are sensitive to their children's power states.
+	 */
+	pm_runtime_set_active(dev);
+	pm_suspend_ignore_children(dev, false);
+	if (driver->supports_autosuspend)
+		pm_runtime_enable(dev);
+
+	/* Carry out a deferred switch to altsetting 0 */
+	if (intf->needs_altsetting0) {
+		error = usb_set_interface(udev, intf->altsetting[0].
+				desc.bInterfaceNumber, 0);
+		if (error < 0)
 			goto err;
-
-		intf->condition = USB_INTERFACE_BOUND;
-		usb_autosuspend_device(udev);
+		intf->needs_altsetting0 = 0;
 	}
 
+	error = driver->probe(intf, id);
+	if (error)
+		goto err;
+
+	intf->condition = USB_INTERFACE_BOUND;
+	usb_autosuspend_device(udev);
 	return error;
 
-err:
-	mark_quiesced(intf);
+ err:
 	intf->needs_remote_wakeup = 0;
 	intf->condition = USB_INTERFACE_UNBOUND;
 	usb_cancel_queued_reset(intf);
+
+	/* Unbound interfaces are always runtime-PM-disabled and -suspended */
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+
 	usb_autosuspend_device(udev);
 	return error;
 }
@@ -377,9 +384,17 @@ static int usb_unbind_interface(struct device *dev)
 	usb_set_intfdata(intf, NULL);
 
 	intf->condition = USB_INTERFACE_UNBOUND;
-	mark_quiesced(intf);
 	intf->needs_remote_wakeup = 0;
 
+	/* Unbound interfaces are always runtime-PM-disabled and -suspended */
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+
+	/* Undo any residual pm_autopm_get_interface_* calls */
+	for (r = atomic_read(&intf->pm_usage_cnt); r > 0; --r)
+		usb_autopm_put_interface_no_suspend(intf);
+	atomic_set(&intf->pm_usage_cnt, 0);
+
 	if (!error)
 		usb_autosuspend_device(udev);
 
@@ -410,7 +425,6 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 				struct usb_interface *iface, void *priv)
 {
 	struct device *dev = &iface->dev;
-	struct usb_device *udev = interface_to_usbdev(iface);
 	int retval = 0;
 
 	if (dev->driver)
@@ -420,11 +434,16 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 	usb_set_intfdata(iface, priv);
 	iface->needs_binding = 0;
 
-	usb_pm_lock(udev);
 	iface->condition = USB_INTERFACE_BOUND;
-	mark_active(iface);
-	atomic_set(&iface->pm_usage_cnt, !driver->supports_autosuspend);
-	usb_pm_unlock(udev);
+
+	/* Bound interfaces are initially active.  They are
+	 * runtime-PM-enabled only if the driver has autosuspend support.
+	 * They are sensitive to their children's power states.
+	 */
+	pm_runtime_set_active(dev);
+	pm_suspend_ignore_children(dev, false);
+	if (driver->supports_autosuspend)
+		pm_runtime_enable(dev);
 
 	/* if interface was already added, bind now; else let
 	 * the future device_add() bind it, bypassing probe()
@@ -691,9 +710,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct usb_device *usb_dev;
 
-	/* driver is often null here; dev_dbg() would oops */
-	pr_debug("usb %s: uevent\n", dev_name(dev));
-
 	if (is_usb_device(dev)) {
 		usb_dev = to_usb_device(dev);
 	} else if (is_usb_interface(dev)) {
@@ -705,6 +721,7 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
 	}
 
 	if (usb_dev->devnum < 0) {
+		/* driver is often null here; dev_dbg() would oops */
 		pr_debug("usb %s: already deleted?\n", dev_name(dev));
 		return -ENODEV;
 	}
@@ -983,7 +1000,6 @@ static void do_unbind_rebind(struct usb_device *udev, int action)
 	}
 }
 
-/* Caller has locked udev's pm_mutex */
 static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
 {
 	struct usb_device_driver	*udriver;
@@ -1007,7 +1023,6 @@ static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
 	return status;
 }
 
-/* Caller has locked udev's pm_mutex */
 static int usb_resume_device(struct usb_device *udev, pm_message_t msg)
 {
 	struct usb_device_driver	*udriver;
@@ -1041,27 +1056,20 @@ static int usb_resume_device(struct usb_device *udev, pm_message_t msg)
 	return status;
 }
 
-/* Caller has locked intf's usb_device's pm mutex */
 static int usb_suspend_interface(struct usb_device *udev,
 		struct usb_interface *intf, pm_message_t msg)
 {
 	struct usb_driver	*driver;
 	int			status = 0;
 
-	/* with no hardware, USB interfaces only use FREEZE and ON states */
-	if (udev->state == USB_STATE_NOTATTACHED || !is_active(intf))
-		goto done;
-
-	/* This can happen; see usb_driver_release_interface() */
-	if (intf->condition == USB_INTERFACE_UNBOUND)
+	if (udev->state == USB_STATE_NOTATTACHED ||
+			intf->condition == USB_INTERFACE_UNBOUND)
 		goto done;
 	driver = to_usb_driver(intf->dev.driver);
 
 	if (driver->suspend) {
 		status = driver->suspend(intf, msg);
-		if (status == 0)
-			mark_quiesced(intf);
-		else if (!(msg.event & PM_EVENT_AUTO))
+		if (status && !(msg.event & PM_EVENT_AUTO))
 			dev_err(&intf->dev, "%s error %d\n",
 					"suspend", status);
 	} else {
@@ -1069,7 +1077,6 @@ static int usb_suspend_interface(struct usb_device *udev,
 		intf->needs_binding = 1;
 		dev_warn(&intf->dev, "no %s for driver %s?\n",
 				"suspend", driver->name);
-		mark_quiesced(intf);
 	}
 
  done:
@@ -1077,14 +1084,13 @@ static int usb_suspend_interface(struct usb_device *udev,
 	return status;
 }
 
-/* Caller has locked intf's usb_device's pm_mutex */
 static int usb_resume_interface(struct usb_device *udev,
 		struct usb_interface *intf, pm_message_t msg, int reset_resume)
 {
 	struct usb_driver	*driver;
 	int			status = 0;
 
-	if (udev->state == USB_STATE_NOTATTACHED || is_active(intf))
+	if (udev->state == USB_STATE_NOTATTACHED)
 		goto done;
 
 	/* Don't let autoresume interfere with unbinding */
@@ -1135,90 +1141,11 @@ static int usb_resume_interface(struct usb_device *udev,
 
 done:
 	dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status);
-	if (status == 0 && intf->condition == USB_INTERFACE_BOUND)
-		mark_active(intf);
 
 	/* Later we will unbind the driver and/or reprobe, if necessary */
 	return status;
 }
 
-#ifdef	CONFIG_USB_SUSPEND
-
-/* Internal routine to check whether we may autosuspend a device. */
-static int autosuspend_check(struct usb_device *udev, int reschedule)
-{
-	int			i;
-	struct usb_interface	*intf;
-	unsigned long		suspend_time, j;
-
-	/* For autosuspend, fail fast if anything is in use or autosuspend
-	 * is disabled.  Also fail if any interfaces require remote wakeup
-	 * but it isn't available.
-	 */
-	if (udev->pm_usage_cnt > 0)
-		return -EBUSY;
-	if (udev->autosuspend_delay < 0 || udev->autosuspend_disabled)
-		return -EPERM;
-
-	suspend_time = udev->last_busy + udev->autosuspend_delay;
-	if (udev->actconfig) {
-		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
-			intf = udev->actconfig->interface[i];
-			if (!is_active(intf))
-				continue;
-			if (atomic_read(&intf->pm_usage_cnt) > 0)
-				return -EBUSY;
-			if (intf->needs_remote_wakeup &&
-					!udev->do_remote_wakeup) {
-				dev_dbg(&udev->dev, "remote wakeup needed "
-						"for autosuspend\n");
-				return -EOPNOTSUPP;
-			}
-
-			/* Don't allow autosuspend if the device will need
-			 * a reset-resume and any of its interface drivers
-			 * doesn't include support.
-			 */
-			if (udev->quirks & USB_QUIRK_RESET_RESUME) {
-				struct usb_driver *driver;
-
-				driver = to_usb_driver(intf->dev.driver);
-				if (!driver->reset_resume ||
-				    intf->needs_remote_wakeup)
-					return -EOPNOTSUPP;
-			}
-		}
-	}
-
-	/* If everything is okay but the device hasn't been idle for long
-	 * enough, queue a delayed autosuspend request.  If the device
-	 * _has_ been idle for long enough and the reschedule flag is set,
-	 * likewise queue a delayed (1 second) autosuspend request.
-	 */
-	j = jiffies;
-	if (time_before(j, suspend_time))
-		reschedule = 1;
-	else
-		suspend_time = j + HZ;
-	if (reschedule) {
-		if (!timer_pending(&udev->autosuspend.timer)) {
-			queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
-				round_jiffies_up_relative(suspend_time - j));
-		}
-		return -EAGAIN;
-	}
-	return 0;
-}
-
-#else
-
-static inline int autosuspend_check(struct usb_device *udev, int reschedule)
-{
-	return 0;
-}
-
-#endif	/* CONFIG_USB_SUSPEND */
-
 /**
  * usb_suspend_both - suspend a USB device and its interfaces
  * @udev: the usb_device to suspend
@@ -1230,27 +1157,12 @@ static inline int autosuspend_check(struct usb_device *udev, int reschedule)
  * all the interfaces which were suspended are resumed so that they remain
  * in the same state as the device.
  *
- * If an autosuspend is in progress the routine checks first to make sure
- * that neither the device itself or any of its active interfaces is in use
- * (pm_usage_cnt is greater than 0).  If they are, the autosuspend fails.
- *
- * If the suspend succeeds, the routine recursively queues an autosuspend
- * request for @udev's parent device, thereby propagating the change up
- * the device tree.  If all of the parent's children are now suspended,
- * the parent will autosuspend in turn.
- *
- * The suspend method calls are subject to mutual exclusion under control
- * of @udev's pm_mutex.  Many of these calls are also under the protection
- * of @udev's device lock (including all requests originating outside the
- * USB subsystem), but autosuspend requests generated by a child device or
- * interface driver may not be.  Usbcore will insure that the method calls
- * do not arrive during bind, unbind, or reset operations.  However, drivers
- * must be prepared to handle suspend calls arriving at unpredictable times.
- * The only way to block such calls is to do an autoresume (preventing
- * autosuspends) while holding @udev's device lock (preventing outside
- * suspends).
- *
- * The caller must hold @udev->pm_mutex.
+ * Autosuspend requests originating from a child device or an interface
+ * driver may be made without the protection of @udev's device lock, but
+ * all other suspend calls will hold the lock.  Usbcore will insure that
+ * method calls do not arrive during bind, unbind, or reset operations.
+ * However drivers must be prepared to handle suspend calls arriving at
+ * unpredictable times.
  *
  * This routine can run only in process context.
  */
@@ -1259,20 +1171,11 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	int			status = 0;
 	int			i = 0;
 	struct usb_interface	*intf;
-	struct usb_device	*parent = udev->parent;
 
 	if (udev->state == USB_STATE_NOTATTACHED ||
 			udev->state == USB_STATE_SUSPENDED)
 		goto done;
 
-	udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
-
-	if (msg.event & PM_EVENT_AUTO) {
-		status = autosuspend_check(udev, 0);
-		if (status < 0)
-			goto done;
-	}
-
 	/* Suspend all the interfaces and then udev itself */
 	if (udev->actconfig) {
 		for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
@@ -1287,35 +1190,21 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 
 	/* If the suspend failed, resume interfaces that did get suspended */
 	if (status != 0) {
-		pm_message_t msg2;
-
-		msg2.event = msg.event ^ (PM_EVENT_SUSPEND | PM_EVENT_RESUME);
+		msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME);
 		while (--i >= 0) {
 			intf = udev->actconfig->interface[i];
-			usb_resume_interface(udev, intf, msg2, 0);
+			usb_resume_interface(udev, intf, msg, 0);
 		}
 
-		/* Try another autosuspend when the interfaces aren't busy */
-		if (msg.event & PM_EVENT_AUTO)
-			autosuspend_check(udev, status == -EBUSY);
-
-	/* If the suspend succeeded then prevent any more URB submissions,
-	 * flush any outstanding URBs, and propagate the suspend up the tree.
+	/* If the suspend succeeded then prevent any more URB submissions
+	 * and flush any outstanding URBs.
 	 */
 	} else {
-		cancel_delayed_work(&udev->autosuspend);
 		udev->can_submit = 0;
 		for (i = 0; i < 16; ++i) {
 			usb_hcd_flush_endpoint(udev, udev->ep_out[i]);
 			usb_hcd_flush_endpoint(udev, udev->ep_in[i]);
 		}
-
-		/* If this is just a FREEZE or a PRETHAW, udev might
-		 * not really be suspended.  Only true suspends get
-		 * propagated up the device tree.
-		 */
-		if (parent && udev->state == USB_STATE_SUSPENDED)
-			usb_autosuspend_device(parent);
 	}
 
  done:
@@ -1332,23 +1221,12 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
  * the resume method for @udev and then calls the resume methods for all
  * the interface drivers in @udev.
  *
- * Before starting the resume, the routine calls itself recursively for
- * the parent device of @udev, thereby propagating the change up the device
- * tree and assuring that @udev will be able to resume.  If the parent is
- * unable to resume successfully, the routine fails.
- *
- * The resume method calls are subject to mutual exclusion under control
- * of @udev's pm_mutex.  Many of these calls are also under the protection
- * of @udev's device lock (including all requests originating outside the
- * USB subsystem), but autoresume requests generated by a child device or
- * interface driver may not be.  Usbcore will insure that the method calls
- * do not arrive during bind, unbind, or reset operations.  However, drivers
- * must be prepared to handle resume calls arriving at unpredictable times.
- * The only way to block such calls is to do an autoresume (preventing
- * other autoresumes) while holding @udev's device lock (preventing outside
- * resumes).
- *
- * The caller must hold @udev->pm_mutex.
+ * Autoresume requests originating from a child device or an interface
+ * driver may be made without the protection of @udev's device lock, but
+ * all other resume calls will hold the lock.  Usbcore will insure that
+ * method calls do not arrive during bind, unbind, or reset operations.
+ * However drivers must be prepared to handle resume calls arriving at
+ * unpredictable times.
  *
  * This routine can run only in process context.
  */
@@ -1357,48 +1235,18 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
 	int			status = 0;
 	int			i;
 	struct usb_interface	*intf;
-	struct usb_device	*parent = udev->parent;
 
-	cancel_delayed_work(&udev->autosuspend);
 	if (udev->state == USB_STATE_NOTATTACHED) {
 		status = -ENODEV;
 		goto done;
 	}
 	udev->can_submit = 1;
 
-	/* Propagate the resume up the tree, if necessary */
-	if (udev->state == USB_STATE_SUSPENDED) {
-		if (parent) {
-			status = usb_autoresume_device(parent);
-			if (status == 0) {
-				status = usb_resume_device(udev, msg);
-				if (status || udev->state ==
-						USB_STATE_NOTATTACHED) {
-					usb_autosuspend_device(parent);
-
-					/* It's possible usb_resume_device()
-					 * failed after the port was
-					 * unsuspended, causing udev to be
-					 * logically disconnected.  We don't
-					 * want usb_disconnect() to autosuspend
-					 * the parent again, so tell it that
-					 * udev disconnected while still
-					 * suspended. */
-					if (udev->state ==
-							USB_STATE_NOTATTACHED)
-						udev->discon_suspended = 1;
-				}
-			}
-		} else {
-
-			/* We can't progagate beyond the USB subsystem,
-			 * so if a root hub's controller is suspended
-			 * then we're stuck. */
-			status = usb_resume_device(udev, msg);
-		}
-	} else if (udev->reset_resume)
+	/* Resume the device */
+	if (udev->state == USB_STATE_SUSPENDED || udev->reset_resume)
 		status = usb_resume_device(udev, msg);
 
+	/* Resume the interfaces */
 	if (status == 0 && udev->actconfig) {
 		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
 			intf = udev->actconfig->interface[i];
@@ -1414,55 +1262,94 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
 	return status;
 }
 
-#ifdef CONFIG_USB_SUSPEND
+/* The device lock is held by the PM core */
+int usb_suspend(struct device *dev, pm_message_t msg)
+{
+	struct usb_device	*udev = to_usb_device(dev);
 
-/* Internal routine to adjust a device's usage counter and change
- * its autosuspend state.
- */
-static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt)
+	do_unbind_rebind(udev, DO_UNBIND);
+	udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
+	return usb_suspend_both(udev, msg);
+}
+
+/* The device lock is held by the PM core */
+int usb_resume(struct device *dev, pm_message_t msg)
 {
-	int	status = 0;
+	struct usb_device	*udev = to_usb_device(dev);
+	int			status;
 
-	usb_pm_lock(udev);
-	udev->pm_usage_cnt += inc_usage_cnt;
-	WARN_ON(udev->pm_usage_cnt < 0);
-	if (inc_usage_cnt)
-		udev->last_busy = jiffies;
-	if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) {
-		if (udev->state == USB_STATE_SUSPENDED)
-			status = usb_resume_both(udev, PMSG_AUTO_RESUME);
-		if (status != 0)
-			udev->pm_usage_cnt -= inc_usage_cnt;
-		else if (inc_usage_cnt)
+	/* For PM complete calls, all we do is rebind interfaces */
+	if (msg.event == PM_EVENT_ON) {
+		if (udev->state != USB_STATE_NOTATTACHED)
+			do_unbind_rebind(udev, DO_REBIND);
+		status = 0;
+
+	/* For all other calls, take the device back to full power and
+	 * tell the PM core in case it was autosuspended previously.
+	 */
+	} else {
+		status = usb_resume_both(udev, msg);
+		if (status == 0) {
+			pm_runtime_disable(dev);
+			pm_runtime_set_active(dev);
+			pm_runtime_enable(dev);
 			udev->last_busy = jiffies;
-	} else if (inc_usage_cnt <= 0 && udev->pm_usage_cnt <= 0) {
-		status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
+		}
 	}
-	usb_pm_unlock(udev);
+
+	/* Avoid PM error messages for devices disconnected while suspended
+	 * as we'll display regular disconnect messages just a bit later.
+	 */
+	if (status == -ENODEV)
+		status = 0;
 	return status;
 }
 
-/* usb_autosuspend_work - callback routine to autosuspend a USB device */
-void usb_autosuspend_work(struct work_struct *work)
-{
-	struct usb_device *udev =
-		container_of(work, struct usb_device, autosuspend.work);
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_USB_SUSPEND
 
-	usb_autopm_do_device(udev, 0);
+/**
+ * usb_enable_autosuspend - allow a USB device to be autosuspended
+ * @udev: the USB device which may be autosuspended
+ *
+ * This routine allows @udev to be autosuspended.  An autosuspend won't
+ * take place until the autosuspend_delay has elapsed and all the other
+ * necessary conditions are satisfied.
+ *
+ * The caller must hold @udev's device lock.
+ */
+int usb_enable_autosuspend(struct usb_device *udev)
+{
+	if (udev->autosuspend_disabled) {
+		udev->autosuspend_disabled = 0;
+		usb_autosuspend_device(udev);
+	}
+	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_enable_autosuspend);
 
-/* usb_autoresume_work - callback routine to autoresume a USB device */
-void usb_autoresume_work(struct work_struct *work)
+/**
+ * usb_disable_autosuspend - prevent a USB device from being autosuspended
+ * @udev: the USB device which may not be autosuspended
+ *
+ * This routine prevents @udev from being autosuspended and wakes it up
+ * if it is already autosuspended.
+ *
+ * The caller must hold @udev's device lock.
+ */
+int usb_disable_autosuspend(struct usb_device *udev)
 {
-	struct usb_device *udev =
-		container_of(work, struct usb_device, autoresume);
+	int rc = 0;
 
-	/* Wake it up, let the drivers do their thing, and then put it
-	 * back to sleep.
-	 */
-	if (usb_autopm_do_device(udev, 1) == 0)
-		usb_autopm_do_device(udev, -1);
+	if (!udev->autosuspend_disabled) {
+		rc = usb_autoresume_device(udev);
+		if (rc == 0)
+			udev->autosuspend_disabled = 1;
+	}
+	return rc;
 }
+EXPORT_SYMBOL_GPL(usb_disable_autosuspend);
 
 /**
  * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
@@ -1472,15 +1359,11 @@ void usb_autoresume_work(struct work_struct *work)
  * @udev and wants to allow it to autosuspend.  Examples would be when
  * @udev's device file in usbfs is closed or after a configuration change.
  *
- * @udev's usage counter is decremented.  If it or any of the usage counters
- * for an active interface is greater than 0, no autosuspend request will be
- * queued.  (If an interface driver does not support autosuspend then its
- * usage counter is permanently positive.)  Furthermore, if an interface
- * driver requires remote-wakeup capability during autosuspend but remote
- * wakeup is disabled, the autosuspend will fail.
+ * @udev's usage counter is decremented; if it drops to 0 and all the
+ * interfaces are inactive then a delayed autosuspend will be attempted.
+ * The attempt may fail (see autosuspend_check()).
  *
- * Often the caller will hold @udev's device lock, but this is not
- * necessary.
+ * The caller must hold @udev's device lock.
  *
  * This routine can run only in process context.
  */
@@ -1488,9 +1371,11 @@ void usb_autosuspend_device(struct usb_device *udev)
 {
 	int	status;
 
-	status = usb_autopm_do_device(udev, -1);
-	dev_vdbg(&udev->dev, "%s: cnt %d\n",
-			__func__, udev->pm_usage_cnt);
+	udev->last_busy = jiffies;
+	status = pm_runtime_put_sync(&udev->dev);
+	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&udev->dev.power.usage_count),
+			status);
 }
 
 /**
@@ -1500,17 +1385,22 @@ void usb_autosuspend_device(struct usb_device *udev)
  * This routine should be called when a core subsystem thinks @udev may
  * be ready to autosuspend.
  *
- * @udev's usage counter left unchanged.  If it or any of the usage counters
- * for an active interface is greater than 0, or autosuspend is not allowed
- * for any other reason, no autosuspend request will be queued.
+ * @udev's usage counter left unchanged.  If it is 0 and all the interfaces
+ * are inactive then an autosuspend will be attempted.  The attempt may
+ * fail or be delayed.
+ *
+ * The caller must hold @udev's device lock.
  *
  * This routine can run only in process context.
  */
 void usb_try_autosuspend_device(struct usb_device *udev)
 {
-	usb_autopm_do_device(udev, 0);
-	dev_vdbg(&udev->dev, "%s: cnt %d\n",
-			__func__, udev->pm_usage_cnt);
+	int	status;
+
+	status = pm_runtime_idle(&udev->dev);
+	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&udev->dev.power.usage_count),
+			status);
 }
 
 /**
@@ -1519,16 +1409,15 @@ void usb_try_autosuspend_device(struct usb_device *udev)
  *
  * This routine should be called when a core subsystem wants to use @udev
  * and needs to guarantee that it is not suspended.  No autosuspend will
- * occur until usb_autosuspend_device is called.  (Note that this will not
- * prevent suspend events originating in the PM core.)  Examples would be
- * when @udev's device file in usbfs is opened or when a remote-wakeup
+ * occur until usb_autosuspend_device() is called.  (Note that this will
+ * not prevent suspend events originating in the PM core.)  Examples would
+ * be when @udev's device file in usbfs is opened or when a remote-wakeup
  * request is received.
  *
  * @udev's usage counter is incremented to prevent subsequent autosuspends.
  * However if the autoresume fails then the usage counter is re-decremented.
  *
- * Often the caller will hold @udev's device lock, but this is not
- * necessary (and attempting it might cause deadlock).
+ * The caller must hold @udev's device lock.
  *
  * This routine can run only in process context.
  */
@@ -1536,42 +1425,14 @@ int usb_autoresume_device(struct usb_device *udev)
 {
 	int	status;
 
-	status = usb_autopm_do_device(udev, 1);
-	dev_vdbg(&udev->dev, "%s: status %d cnt %d\n",
-			__func__, status, udev->pm_usage_cnt);
-	return status;
-}
-
-/* Internal routine to adjust an interface's usage counter and change
- * its device's autosuspend state.
- */
-static int usb_autopm_do_interface(struct usb_interface *intf,
-		int inc_usage_cnt)
-{
-	struct usb_device	*udev = interface_to_usbdev(intf);
-	int			status = 0;
-
-	usb_pm_lock(udev);
-	if (intf->condition == USB_INTERFACE_UNBOUND)
-		status = -ENODEV;
-	else {
-		atomic_add(inc_usage_cnt, &intf->pm_usage_cnt);
-		udev->last_busy = jiffies;
-		if (inc_usage_cnt >= 0 &&
-				atomic_read(&intf->pm_usage_cnt) > 0) {
-			if (udev->state == USB_STATE_SUSPENDED)
-				status = usb_resume_both(udev,
-						PMSG_AUTO_RESUME);
-			if (status != 0)
-				atomic_sub(inc_usage_cnt, &intf->pm_usage_cnt);
-			else
-				udev->last_busy = jiffies;
-		} else if (inc_usage_cnt <= 0 &&
-				atomic_read(&intf->pm_usage_cnt) <= 0) {
-			status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
-		}
-	}
-	usb_pm_unlock(udev);
+	status = pm_runtime_get_sync(&udev->dev);
+	if (status < 0)
+		pm_runtime_put_sync(&udev->dev);
+	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&udev->dev.power.usage_count),
+			status);
+	if (status > 0)
+		status = 0;
 	return status;
 }
 
@@ -1585,34 +1446,25 @@ static int usb_autopm_do_interface(struct usb_interface *intf,
  * closed.
  *
  * The routine decrements @intf's usage counter.  When the counter reaches
- * 0, a delayed autosuspend request for @intf's device is queued.  When
- * the delay expires, if @intf->pm_usage_cnt is still <= 0 along with all
- * the other usage counters for the sibling interfaces and @intf's
- * usb_device, the device and all its interfaces will be autosuspended.
- *
- * Note that @intf->pm_usage_cnt is owned by the interface driver.  The
- * core will not change its value other than the increment and decrement
- * in usb_autopm_get_interface and usb_autopm_put_interface.  The driver
- * may use this simple counter-oriented discipline or may set the value
- * any way it likes.
+ * 0, a delayed autosuspend request for @intf's device is attempted.  The
+ * attempt may fail (see autosuspend_check()).
  *
  * If the driver has set @intf->needs_remote_wakeup then autosuspend will
  * take place only if the device's remote-wakeup facility is enabled.
  *
- * Suspend method calls queued by this routine can arrive at any time
- * while @intf is resumed and its usage counter is equal to 0.  They are
- * not protected by the usb_device's lock but only by its pm_mutex.
- * Drivers must provide their own synchronization.
- *
  * This routine can run only in process context.
  */
 void usb_autopm_put_interface(struct usb_interface *intf)
 {
-	int	status;
+	struct usb_device	*udev = interface_to_usbdev(intf);
+	int			status;
 
-	status = usb_autopm_do_interface(intf, -1);
-	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
-			__func__, status, atomic_read(&intf->pm_usage_cnt));
+	udev->last_busy = jiffies;
+	atomic_dec(&intf->pm_usage_cnt);
+	status = pm_runtime_put_sync(&intf->dev);
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
 }
 EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
 
@@ -1620,11 +1472,11 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
  * usb_autopm_put_interface_async - decrement a USB interface's PM-usage counter
  * @intf: the usb_interface whose counter should be decremented
  *
- * This routine does essentially the same thing as
- * usb_autopm_put_interface(): it decrements @intf's usage counter and
- * queues a delayed autosuspend request if the counter is <= 0.  The
- * difference is that it does not acquire the device's pm_mutex;
- * callers must handle all synchronization issues themselves.
+ * This routine does much the same thing as usb_autopm_put_interface():
+ * It decrements @intf's usage counter and schedules a delayed
+ * autosuspend request if the counter is <= 0.  The difference is that it
+ * does not perform any synchronization; callers should hold a private
+ * lock and handle all synchronization issues themselves.
  *
  * Typically a driver would call this routine during an URB's completion
  * handler, if no more URBs were pending.
@@ -1634,28 +1486,58 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
 void usb_autopm_put_interface_async(struct usb_interface *intf)
 {
 	struct usb_device	*udev = interface_to_usbdev(intf);
+	unsigned long		last_busy;
 	int			status = 0;
 
-	if (intf->condition == USB_INTERFACE_UNBOUND) {
-		status = -ENODEV;
-	} else {
-		udev->last_busy = jiffies;
-		atomic_dec(&intf->pm_usage_cnt);
-		if (udev->autosuspend_disabled || udev->autosuspend_delay < 0)
-			status = -EPERM;
-		else if (atomic_read(&intf->pm_usage_cnt) <= 0 &&
-				!timer_pending(&udev->autosuspend.timer)) {
-			queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
+	last_busy = udev->last_busy;
+	udev->last_busy = jiffies;
+	atomic_dec(&intf->pm_usage_cnt);
+	pm_runtime_put_noidle(&intf->dev);
+
+	if (!udev->autosuspend_disabled) {
+		/* Optimization: Don't schedule a delayed autosuspend if
+		 * the timer is already running and the expiration time
+		 * wouldn't change.
+		 *
+		 * We have to use the interface's timer.  Attempts to
+		 * schedule a suspend for the device would fail because
+		 * the interface is still active.
+		 */
+		if (intf->dev.power.timer_expires == 0 ||
+				round_jiffies_up(last_busy) !=
+				round_jiffies_up(jiffies)) {
+			status = pm_schedule_suspend(&intf->dev,
+					jiffies_to_msecs(
 					round_jiffies_up_relative(
-						udev->autosuspend_delay));
+						udev->autosuspend_delay)));
 		}
 	}
-	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
-			__func__, status, atomic_read(&intf->pm_usage_cnt));
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
 }
 EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async);
 
 /**
+ * usb_autopm_put_interface_no_suspend - decrement a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be decremented
+ *
+ * This routine decrements @intf's usage counter but does not carry out an
+ * autosuspend.
+ *
+ * This routine can run in atomic context.
+ */
+void usb_autopm_put_interface_no_suspend(struct usb_interface *intf)
+{
+	struct usb_device	*udev = interface_to_usbdev(intf);
+
+	udev->last_busy = jiffies;
+	atomic_dec(&intf->pm_usage_cnt);
+	pm_runtime_put_noidle(&intf->dev);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_put_interface_no_suspend);
+
+/**
  * usb_autopm_get_interface - increment a USB interface's PM-usage counter
  * @intf: the usb_interface whose counter should be incremented
  *
@@ -1667,25 +1549,8 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async);
  * or @intf is unbound.  A typical example would be a character-device
  * driver when its device file is opened.
  *
- *
- * The routine increments @intf's usage counter.  (However if the
- * autoresume fails then the counter is re-decremented.)  So long as the
- * counter is greater than 0, autosuspend will not be allowed for @intf
- * or its usb_device.  When the driver is finished using @intf it should
- * call usb_autopm_put_interface() to decrement the usage counter and
- * queue a delayed autosuspend request (if the counter is <= 0).
- *
- *
- * Note that @intf->pm_usage_cnt is owned by the interface driver.  The
- * core will not change its value other than the increment and decrement
- * in usb_autopm_get_interface and usb_autopm_put_interface.  The driver
- * may use this simple counter-oriented discipline or may set the value
- * any way it likes.
- *
- * Resume method calls generated by this routine can arrive at any time
- * while @intf is suspended.  They are not protected by the usb_device's
- * lock but only by its pm_mutex.  Drivers must provide their own
- * synchronization.
+ * @intf's usage counter is incremented to prevent subsequent autosuspends.
+ * However if the autoresume fails then the counter is re-decremented.
  *
  * This routine can run only in process context.
  */
@@ -1693,9 +1558,16 @@ int usb_autopm_get_interface(struct usb_interface *intf)
 {
 	int	status;
 
-	status = usb_autopm_do_interface(intf, 1);
-	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
-			__func__, status, atomic_read(&intf->pm_usage_cnt));
+	status = pm_runtime_get_sync(&intf->dev);
+	if (status < 0)
+		pm_runtime_put_sync(&intf->dev);
+	else
+		atomic_inc(&intf->pm_usage_cnt);
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
+	if (status > 0)
+		status = 0;
 	return status;
 }
 EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
@@ -1705,149 +1577,207 @@ EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
  * @intf: the usb_interface whose counter should be incremented
  *
  * This routine does much the same thing as
- * usb_autopm_get_interface(): it increments @intf's usage counter and
- * queues an autoresume request if the result is > 0.  The differences
- * are that it does not acquire the device's pm_mutex (callers must
- * handle all synchronization issues themselves), and it does not
- * autoresume the device directly (it only queues a request).  After a
- * successful call, the device will generally not yet be resumed.
+ * usb_autopm_get_interface(): It increments @intf's usage counter and
+ * queues an autoresume request if the device is suspended.  The
+ * differences are that it does not perform any synchronization (callers
+ * should hold a private lock and handle all synchronization issues
+ * themselves), and it does not autoresume the device directly (it only
+ * queues a request).  After a successful call, the device may not yet be
+ * resumed.
  *
  * This routine can run in atomic context.
  */
 int usb_autopm_get_interface_async(struct usb_interface *intf)
 {
-	struct usb_device	*udev = interface_to_usbdev(intf);
-	int			status = 0;
+	int		status = 0;
+	enum rpm_status	s;
 
-	if (intf->condition == USB_INTERFACE_UNBOUND)
-		status = -ENODEV;
-	else {
+	/* Don't request a resume unless the interface is already suspending
+	 * or suspended.  Doing so would force a running suspend timer to be
+	 * cancelled.
+	 */
+	pm_runtime_get_noresume(&intf->dev);
+	s = ACCESS_ONCE(intf->dev.power.runtime_status);
+	if (s == RPM_SUSPENDING || s == RPM_SUSPENDED)
+		status = pm_request_resume(&intf->dev);
+
+	if (status < 0 && status != -EINPROGRESS)
+		pm_runtime_put_noidle(&intf->dev);
+	else
 		atomic_inc(&intf->pm_usage_cnt);
-		if (atomic_read(&intf->pm_usage_cnt) > 0 &&
-				udev->state == USB_STATE_SUSPENDED)
-			queue_work(ksuspend_usb_wq, &udev->autoresume);
-	}
-	dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
-			__func__, status, atomic_read(&intf->pm_usage_cnt));
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
+	if (status > 0)
+		status = 0;
 	return status;
 }
 EXPORT_SYMBOL_GPL(usb_autopm_get_interface_async);
 
-#else
-
-void usb_autosuspend_work(struct work_struct *work)
-{}
-
-void usb_autoresume_work(struct work_struct *work)
-{}
-
-#endif /* CONFIG_USB_SUSPEND */
-
 /**
- * usb_external_suspend_device - external suspend of a USB device and its interfaces
- * @udev: the usb_device to suspend
- * @msg: Power Management message describing this state transition
+ * usb_autopm_get_interface_no_resume - increment a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be incremented
  *
- * This routine handles external suspend requests: ones not generated
- * internally by a USB driver (autosuspend) but rather coming from the user
- * (via sysfs) or the PM core (system sleep).  The suspend will be carried
- * out regardless of @udev's usage counter or those of its interfaces,
- * and regardless of whether or not remote wakeup is enabled.  Of course,
- * interface drivers still have the option of failing the suspend (if
- * there are unsuspended children, for example).
+ * This routine increments @intf's usage counter but does not carry out an
+ * autoresume.
  *
- * The caller must hold @udev's device lock.
+ * This routine can run in atomic context.
  */
-int usb_external_suspend_device(struct usb_device *udev, pm_message_t msg)
+void usb_autopm_get_interface_no_resume(struct usb_interface *intf)
 {
-	int	status;
+	struct usb_device	*udev = interface_to_usbdev(intf);
 
-	do_unbind_rebind(udev, DO_UNBIND);
-	usb_pm_lock(udev);
-	status = usb_suspend_both(udev, msg);
-	usb_pm_unlock(udev);
-	return status;
+	udev->last_busy = jiffies;
+	atomic_inc(&intf->pm_usage_cnt);
+	pm_runtime_get_noresume(&intf->dev);
 }
+EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume);
 
-/**
- * usb_external_resume_device - external resume of a USB device and its interfaces
- * @udev: the usb_device to resume
- * @msg: Power Management message describing this state transition
- *
- * This routine handles external resume requests: ones not generated
- * internally by a USB driver (autoresume) but rather coming from the user
- * (via sysfs), the PM core (system resume), or the device itself (remote
- * wakeup).  @udev's usage counter is unaffected.
- *
- * The caller must hold @udev's device lock.
- */
-int usb_external_resume_device(struct usb_device *udev, pm_message_t msg)
+/* Internal routine to check whether we may autosuspend a device. */
+static int autosuspend_check(struct usb_device *udev)
 {
-	int	status;
+	int			i;
+	struct usb_interface	*intf;
+	unsigned long		suspend_time, j;
 
-	usb_pm_lock(udev);
-	status = usb_resume_both(udev, msg);
-	udev->last_busy = jiffies;
-	usb_pm_unlock(udev);
-	if (status == 0)
-		do_unbind_rebind(udev, DO_REBIND);
+	/* Fail if autosuspend is disabled, or any interfaces are in use, or
+	 * any interface drivers require remote wakeup but it isn't available.
+	 */
+	udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
+	if (udev->actconfig) {
+		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+			intf = udev->actconfig->interface[i];
 
-	/* Now that the device is awake, we can start trying to autosuspend
-	 * it again. */
-	if (status == 0)
-		usb_try_autosuspend_device(udev);
-	return status;
+			/* We don't need to check interfaces that are
+			 * disabled for runtime PM.  Either they are unbound
+			 * or else their drivers don't support autosuspend
+			 * and so they are permanently active.
+			 */
+			if (intf->dev.power.disable_depth)
+				continue;
+			if (atomic_read(&intf->dev.power.usage_count) > 0)
+				return -EBUSY;
+			if (intf->needs_remote_wakeup &&
+					!udev->do_remote_wakeup) {
+				dev_dbg(&udev->dev, "remote wakeup needed "
+						"for autosuspend\n");
+				return -EOPNOTSUPP;
+			}
+
+			/* Don't allow autosuspend if the device will need
+			 * a reset-resume and any of its interface drivers
+			 * doesn't include support or needs remote wakeup.
+			 */
+			if (udev->quirks & USB_QUIRK_RESET_RESUME) {
+				struct usb_driver *driver;
+
+				driver = to_usb_driver(intf->dev.driver);
+				if (!driver->reset_resume ||
+						intf->needs_remote_wakeup)
+					return -EOPNOTSUPP;
+			}
+		}
+	}
+
+	/* If everything is okay but the device hasn't been idle for long
+	 * enough, queue a delayed autosuspend request.
+	 */
+	j = ACCESS_ONCE(jiffies);
+	suspend_time = udev->last_busy + udev->autosuspend_delay;
+	if (time_before(j, suspend_time)) {
+		pm_schedule_suspend(&udev->dev, jiffies_to_msecs(
+				round_jiffies_up_relative(suspend_time - j)));
+		return -EAGAIN;
+	}
+	return 0;
 }
 
-int usb_suspend(struct device *dev, pm_message_t msg)
+static int usb_runtime_suspend(struct device *dev)
 {
-	struct usb_device	*udev;
-
-	udev = to_usb_device(dev);
+	int	status = 0;
 
-	/* If udev is already suspended, we can skip this suspend and
-	 * we should also skip the upcoming system resume.  High-speed
-	 * root hubs are an exception; they need to resume whenever the
-	 * system wakes up in order for USB-PERSIST port handover to work
-	 * properly.
+	/* A USB device can be suspended if it passes the various autosuspend
+	 * checks.  Runtime suspend for a USB device means suspending all the
+	 * interfaces and then the device itself.
 	 */
-	if (udev->state == USB_STATE_SUSPENDED) {
-		if (udev->parent || udev->speed != USB_SPEED_HIGH)
-			udev->skip_sys_resume = 1;
-		return 0;
+	if (is_usb_device(dev)) {
+		struct usb_device	*udev = to_usb_device(dev);
+
+		if (autosuspend_check(udev) != 0)
+			return -EAGAIN;
+
+		status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
+
+		/* If an interface fails the suspend, adjust the last_busy
+		 * time so that we don't get another suspend attempt right
+		 * away.
+		 */
+		if (status) {
+			udev->last_busy = jiffies +
+					(udev->autosuspend_delay == 0 ?
+						HZ/2 : 0);
+		}
+
+		/* Prevent the parent from suspending immediately after */
+		else if (udev->parent) {
+			udev->parent->last_busy = jiffies;
+		}
 	}
 
-	udev->skip_sys_resume = 0;
-	return usb_external_suspend_device(udev, msg);
+	/* Runtime suspend for a USB interface doesn't mean anything. */
+	return status;
 }
 
-int usb_resume(struct device *dev, pm_message_t msg)
+static int usb_runtime_resume(struct device *dev)
 {
-	struct usb_device	*udev;
-	int			status;
+	/* Runtime resume for a USB device means resuming both the device
+	 * and all its interfaces.
+	 */
+	if (is_usb_device(dev)) {
+		struct usb_device	*udev = to_usb_device(dev);
+		int			status;
 
-	udev = to_usb_device(dev);
+		status = usb_resume_both(udev, PMSG_AUTO_RESUME);
+		udev->last_busy = jiffies;
+		return status;
+	}
 
-	/* If udev->skip_sys_resume is set then udev was already suspended
-	 * when the system sleep started, so we don't want to resume it
-	 * during this system wakeup.
-	 */
-	if (udev->skip_sys_resume)
-		return 0;
-	status = usb_external_resume_device(udev, msg);
+	/* Runtime resume for a USB interface doesn't mean anything. */
+	return 0;
+}
 
-	/* Avoid PM error messages for devices disconnected while suspended
-	 * as we'll display regular disconnect messages just a bit later.
+static int usb_runtime_idle(struct device *dev)
+{
+	/* An idle USB device can be suspended if it passes the various
+	 * autosuspend checks.  An idle interface can be suspended at
+	 * any time.
 	 */
-	if (status == -ENODEV)
-		return 0;
-	return status;
+	if (is_usb_device(dev)) {
+		struct usb_device	*udev = to_usb_device(dev);
+
+		if (autosuspend_check(udev) != 0)
+			return 0;
+	}
+
+	pm_runtime_suspend(dev);
+	return 0;
 }
 
-#endif /* CONFIG_PM */
+static struct dev_pm_ops usb_bus_pm_ops = {
+	.runtime_suspend =	usb_runtime_suspend,
+	.runtime_resume =	usb_runtime_resume,
+	.runtime_idle =		usb_runtime_idle,
+};
+
+#else
+
+#define usb_bus_pm_ops	(*(struct dev_pm_ops *) NULL)
+
+#endif /* CONFIG_USB_SUSPEND */
 
 struct bus_type usb_bus_type = {
 	.name =		"usb",
 	.match =	usb_device_match,
 	.uevent =	usb_uevent,
+	.pm =		&usb_bus_pm_ops,
 };
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index bfc6c2eea647..c3536f151f02 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -34,7 +34,6 @@ static int usb_open(struct inode * inode, struct file * file)
 	int err = -ENODEV;
 	const struct file_operations *old_fops, *new_fops = NULL;
 
-	lock_kernel();
 	down_read(&minor_rwsem);
 	c = usb_minors[minor];
 
@@ -53,7 +52,6 @@ static int usb_open(struct inode * inode, struct file * file)
 	fops_put(old_fops);
  done:
 	up_read(&minor_rwsem);
-	unlock_kernel();
 	return err;
 }
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 80995ef0868c..2f8cedda8007 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -39,6 +39,7 @@
 #include <linux/platform_device.h>
 #include <linux/workqueue.h>
 #include <linux/mutex.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/usb.h>
 
@@ -141,7 +142,7 @@ static const u8 usb3_rh_dev_descriptor[18] = {
 	0x09,       /*  __u8  bMaxPacketSize0; 2^9 = 512 Bytes */
 
 	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation */
-	0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
+	0x03, 0x00, /*  __le16 idProduct; device 0x0003 */
 	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
 
 	0x03,       /*  __u8  iManufacturer; */
@@ -1670,11 +1671,16 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev,
 			}
 		}
 		for (i = 0; i < num_intfs; ++i) {
+			struct usb_host_interface *first_alt;
+			int iface_num;
+
+			first_alt = &new_config->intf_cache[i]->altsetting[0];
+			iface_num = first_alt->desc.bInterfaceNumber;
 			/* Set up endpoints for alternate interface setting 0 */
-			alt = usb_find_alt_setting(new_config, i, 0);
+			alt = usb_find_alt_setting(new_config, iface_num, 0);
 			if (!alt)
 				/* No alt setting 0? Pick the first setting. */
-				alt = &new_config->intf_cache[i]->altsetting[0];
+				alt = first_alt;
 
 			for (j = 0; j < alt->desc.bNumEndpoints; j++) {
 				ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
@@ -1853,6 +1859,10 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 	return status;
 }
 
+#endif	/* CONFIG_PM */
+
+#ifdef	CONFIG_USB_SUSPEND
+
 /* Workqueue routine for root-hub remote wakeup */
 static void hcd_resume_work(struct work_struct *work)
 {
@@ -1860,8 +1870,7 @@ static void hcd_resume_work(struct work_struct *work)
 	struct usb_device *udev = hcd->self.root_hub;
 
 	usb_lock_device(udev);
-	usb_mark_last_busy(udev);
-	usb_external_resume_device(udev, PMSG_REMOTE_RESUME);
+	usb_remote_wakeup(udev);
 	usb_unlock_device(udev);
 }
 
@@ -1880,12 +1889,12 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
 
 	spin_lock_irqsave (&hcd_root_hub_lock, flags);
 	if (hcd->rh_registered)
-		queue_work(ksuspend_usb_wq, &hcd->wakeup_work);
+		queue_work(pm_wq, &hcd->wakeup_work);
 	spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
 }
 EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
 
-#endif
+#endif	/* CONFIG_USB_SUSPEND */
 
 /*-------------------------------------------------------------------------*/
 
@@ -2030,7 +2039,7 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
 	init_timer(&hcd->rh_timer);
 	hcd->rh_timer.function = rh_timer_func;
 	hcd->rh_timer.data = (unsigned long) hcd;
-#ifdef CONFIG_PM
+#ifdef CONFIG_USB_SUSPEND
 	INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
 #endif
 	mutex_init(&hcd->bandwidth_mutex);
@@ -2230,7 +2239,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	hcd->rh_registered = 0;
 	spin_unlock_irq (&hcd_root_hub_lock);
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_USB_SUSPEND
 	cancel_work_sync(&hcd->wakeup_work);
 #endif
 
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index bbe2b924aae8..a3cdb09734ab 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -80,7 +80,7 @@ struct usb_hcd {
 
 	struct timer_list	rh_timer;	/* drives root-hub polling */
 	struct urb		*status_urb;	/* the current status urb */
-#ifdef CONFIG_PM
+#ifdef CONFIG_USB_SUSPEND
 	struct work_struct	wakeup_work;	/* for remote wakeup */
 #endif
 
@@ -248,7 +248,7 @@ struct hc_driver {
 	/* xHCI specific functions */
 		/* Called by usb_alloc_dev to alloc HC device structures */
 	int	(*alloc_dev)(struct usb_hcd *, struct usb_device *);
-		/* Called by usb_release_dev to free HC device structures */
+		/* Called by usb_disconnect to free HC device structures */
 	void	(*free_dev)(struct usb_hcd *, struct usb_device *);
 
 	/* Bandwidth computation functions */
@@ -286,6 +286,7 @@ struct hc_driver {
 		 */
 	int	(*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
 			struct usb_tt *tt, gfp_t mem_flags);
+	int	(*reset_device)(struct usb_hcd *, struct usb_device *);
 };
 
 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
@@ -463,16 +464,20 @@ extern int usb_find_interface_driver(struct usb_device *dev,
 #define usb_endpoint_out(ep_dir)	(!((ep_dir) & USB_DIR_IN))
 
 #ifdef CONFIG_PM
-extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
 extern void usb_root_hub_lost_power(struct usb_device *rhdev);
 extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
 extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_USB_SUSPEND
+extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
 #else
 static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
 {
 	return;
 }
-#endif /* CONFIG_PM */
+#endif /* CONFIG_USB_SUSPEND */
+
 
 /*
  * USB device fs stuff
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 20ecb4cec8de..0940ccd6f4f4 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -22,6 +22,7 @@
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
+#include <linux/pm_runtime.h>
 
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
@@ -71,7 +72,6 @@ struct usb_hub {
 
 	unsigned		mA_per_port;	/* current for each child */
 
-	unsigned		init_done:1;
 	unsigned		limited_power:1;
 	unsigned		quiescing:1;
 	unsigned		disconnected:1;
@@ -820,7 +820,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	}
  init3:
 	hub->quiescing = 0;
-	hub->init_done = 1;
 
 	status = usb_submit_urb(hub->urb, GFP_NOIO);
 	if (status < 0)
@@ -861,11 +860,6 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
 	int i;
 
 	cancel_delayed_work_sync(&hub->init_work);
-	if (!hub->init_done) {
-		hub->init_done = 1;
-		usb_autopm_put_interface_no_suspend(
-				to_usb_interface(hub->intfdev));
-	}
 
 	/* khubd and related activity won't re-trigger */
 	hub->quiescing = 1;
@@ -1224,6 +1218,9 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	desc = intf->cur_altsetting;
 	hdev = interface_to_usbdev(intf);
 
+	/* Hubs have proper suspend/resume support */
+	usb_enable_autosuspend(hdev);
+
 	if (hdev->level == MAX_TOPO_LEVEL) {
 		dev_err(&intf->dev,
 			"Unsupported bus topology: hub nested too deep\n");
@@ -1402,10 +1399,8 @@ static void recursively_mark_NOTATTACHED(struct usb_device *udev)
 		if (udev->children[i])
 			recursively_mark_NOTATTACHED(udev->children[i]);
 	}
-	if (udev->state == USB_STATE_SUSPENDED) {
-		udev->discon_suspended = 1;
+	if (udev->state == USB_STATE_SUSPENDED)
 		udev->active_duration -= jiffies;
-	}
 	udev->state = USB_STATE_NOTATTACHED;
 }
 
@@ -1448,11 +1443,11 @@ void usb_set_device_state(struct usb_device *udev,
 					|| new_state == USB_STATE_SUSPENDED)
 				;	/* No change to wakeup settings */
 			else if (new_state == USB_STATE_CONFIGURED)
-				device_init_wakeup(&udev->dev,
+				device_set_wakeup_capable(&udev->dev,
 					(udev->actconfig->desc.bmAttributes
 					 & USB_CONFIG_ATT_WAKEUP));
 			else
-				device_init_wakeup(&udev->dev, 0);
+				device_set_wakeup_capable(&udev->dev, 0);
 		}
 		if (udev->state == USB_STATE_SUSPENDED &&
 			new_state != USB_STATE_SUSPENDED)
@@ -1529,31 +1524,15 @@ static void update_address(struct usb_device *udev, int devnum)
 		udev->devnum = devnum;
 }
 
-#ifdef	CONFIG_USB_SUSPEND
-
-static void usb_stop_pm(struct usb_device *udev)
+static void hub_free_dev(struct usb_device *udev)
 {
-	/* Synchronize with the ksuspend thread to prevent any more
-	 * autosuspend requests from being submitted, and decrement
-	 * the parent's count of unsuspended children.
-	 */
-	usb_pm_lock(udev);
-	if (udev->parent && !udev->discon_suspended)
-		usb_autosuspend_device(udev->parent);
-	usb_pm_unlock(udev);
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
 
-	/* Stop any autosuspend or autoresume requests already submitted */
-	cancel_delayed_work_sync(&udev->autosuspend);
-	cancel_work_sync(&udev->autoresume);
+	/* Root hubs aren't real devices, so don't free HCD resources */
+	if (hcd->driver->free_dev && udev->parent)
+		hcd->driver->free_dev(hcd, udev);
 }
 
-#else
-
-static inline void usb_stop_pm(struct usb_device *udev)
-{ }
-
-#endif
-
 /**
  * usb_disconnect - disconnect a device (usbcore-internal)
  * @pdev: pointer to device being disconnected
@@ -1622,7 +1601,7 @@ void usb_disconnect(struct usb_device **pdev)
 	*pdev = NULL;
 	spin_unlock_irq(&device_state_lock);
 
-	usb_stop_pm(udev);
+	hub_free_dev(udev);
 
 	put_device(&udev->dev);
 }
@@ -1799,9 +1778,18 @@ int usb_new_device(struct usb_device *udev)
 {
 	int err;
 
-	/* Increment the parent's count of unsuspended children */
-	if (udev->parent)
-		usb_autoresume_device(udev->parent);
+	if (udev->parent) {
+		/* Initialize non-root-hub device wakeup to disabled;
+		 * device (un)configuration controls wakeup capable
+		 * sysfs power/wakeup controls wakeup enabled/disabled
+		 */
+		device_init_wakeup(&udev->dev, 0);
+		device_set_wakeup_enable(&udev->dev, 1);
+	}
+
+	/* Tell the runtime-PM framework the device is active */
+	pm_runtime_set_active(&udev->dev);
+	pm_runtime_enable(&udev->dev);
 
 	usb_detect_quirks(udev);
 	err = usb_enumerate_device(udev);	/* Read descriptors */
@@ -1833,7 +1821,8 @@ int usb_new_device(struct usb_device *udev)
 
 fail:
 	usb_set_device_state(udev, USB_STATE_NOTATTACHED);
-	usb_stop_pm(udev);
+	pm_runtime_disable(&udev->dev);
+	pm_runtime_set_suspended(&udev->dev);
 	return err;
 }
 
@@ -1982,7 +1971,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 		if (!(portstatus & USB_PORT_STAT_RESET) &&
 		    (portstatus & USB_PORT_STAT_ENABLE)) {
 			if (hub_is_wusb(hub))
-				udev->speed = USB_SPEED_VARIABLE;
+				udev->speed = USB_SPEED_WIRELESS;
 			else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
 				udev->speed = USB_SPEED_HIGH;
 			else if (portstatus & USB_PORT_STAT_LOW_SPEED)
@@ -2008,7 +1997,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 				struct usb_device *udev, unsigned int delay)
 {
 	int i, status;
+	struct usb_hcd *hcd;
 
+	hcd = bus_to_hcd(udev->bus);
 	/* Block EHCI CF initialization during the port reset.
 	 * Some companion controllers don't like it when they mix.
 	 */
@@ -2036,6 +2027,14 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 			/* TRSTRCY = 10 ms; plus some extra */
 			msleep(10 + 40);
 			update_address(udev, 0);
+			if (hcd->driver->reset_device) {
+				status = hcd->driver->reset_device(hcd, udev);
+				if (status < 0) {
+					dev_err(&udev->dev, "Cannot reset "
+							"HCD device state\n");
+					break;
+				}
+			}
 			/* FALL THROUGH */
 		case -ENOTCONN:
 		case -ENODEV:
@@ -2381,14 +2380,17 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 }
 
 /* caller has locked udev */
-static int remote_wakeup(struct usb_device *udev)
+int usb_remote_wakeup(struct usb_device *udev)
 {
 	int	status = 0;
 
 	if (udev->state == USB_STATE_SUSPENDED) {
 		dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
-		usb_mark_last_busy(udev);
-		status = usb_external_resume_device(udev, PMSG_REMOTE_RESUME);
+		status = usb_autoresume_device(udev);
+		if (status == 0) {
+			/* Let the drivers do their thing, then... */
+			usb_autosuspend_device(udev);
+		}
 	}
 	return status;
 }
@@ -2425,11 +2427,6 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	return status;
 }
 
-static inline int remote_wakeup(struct usb_device *udev)
-{
-	return 0;
-}
-
 #endif
 
 static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
@@ -2496,11 +2493,6 @@ EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
 
 #else	/* CONFIG_PM */
 
-static inline int remote_wakeup(struct usb_device *udev)
-{
-	return 0;
-}
-
 #define hub_suspend		NULL
 #define hub_resume		NULL
 #define hub_reset_resume	NULL
@@ -2645,14 +2637,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 
 	mutex_lock(&usb_address0_mutex);
 
-	if ((hcd->driver->flags & HCD_USB3) && udev->config) {
-		/* FIXME this will need special handling by the xHCI driver. */
-		dev_dbg(&udev->dev,
-				"xHCI reset of configured device "
-				"not supported yet.\n");
-		retval = -EINVAL;
-		goto fail;
-	} else if (!udev->config && oldspeed == USB_SPEED_SUPER) {
+	if (!udev->config && oldspeed == USB_SPEED_SUPER) {
 		/* Don't reset USB 3.0 devices during an initial setup */
 		usb_set_device_state(udev, USB_STATE_DEFAULT);
 	} else {
@@ -2678,7 +2663,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 */
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-	case USB_SPEED_VARIABLE:	/* fixed at 512 */
+	case USB_SPEED_WIRELESS:	/* fixed at 512 */
 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
 		break;
 	case USB_SPEED_HIGH:		/* fixed at 64 */
@@ -2706,7 +2691,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	case USB_SPEED_SUPER:
 				speed = "super";
 				break;
-	case USB_SPEED_VARIABLE:
+	case USB_SPEED_WIRELESS:
 				speed = "variable";
 				type = "Wireless ";
 				break;
@@ -3006,7 +2991,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 			/* For a suspended device, treat this as a
 			 * remote wakeup event.
 			 */
-			status = remote_wakeup(udev);
+			status = usb_remote_wakeup(udev);
 #endif
 
 		} else {
@@ -3192,6 +3177,7 @@ loop_disable:
 loop:
 		usb_ep0_reinit(udev);
 		release_address(udev);
+		hub_free_dev(udev);
 		usb_put_dev(udev);
 		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
 			break;
@@ -3259,7 +3245,7 @@ static void hub_events(void)
 		 * disconnected while waiting for the lock to succeed. */
 		usb_lock_device(hdev);
 		if (unlikely(hub->disconnected))
-			goto loop2;
+			goto loop_disconnected;
 
 		/* If the hub has died, clean up after it */
 		if (hdev->state == USB_STATE_NOTATTACHED) {
@@ -3352,7 +3338,7 @@ static void hub_events(void)
 					msleep(10);
 
 					usb_lock_device(udev);
-					ret = remote_wakeup(hdev->
+					ret = usb_remote_wakeup(hdev->
 							children[i-1]);
 					usb_unlock_device(udev);
 					if (ret < 0)
@@ -3419,7 +3405,7 @@ static void hub_events(void)
 		 * kick_khubd() and allow autosuspend.
 		 */
 		usb_autopm_put_interface(intf);
- loop2:
+ loop_disconnected:
 		usb_unlock_device(hdev);
 		kref_put(&hub->kref, hub_release);
 
@@ -3446,7 +3432,7 @@ static int hub_thread(void *__unused)
 	return 0;
 }
 
-static struct usb_device_id hub_id_table [] = {
+static const struct usb_device_id hub_id_table[] = {
     { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
       .bDeviceClass = USB_CLASS_HUB},
     { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index df73574a9cc9..cd220277c6c3 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1316,7 +1316,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 
 	alt = usb_altnum_to_altsetting(iface, alternate);
 	if (!alt) {
-		dev_warn(&dev->dev, "selecting invalid altsetting %d",
+		dev_warn(&dev->dev, "selecting invalid altsetting %d\n",
 			 alternate);
 		return -EINVAL;
 	}
@@ -1471,7 +1471,7 @@ int usb_reset_configuration(struct usb_device *dev)
 	/* If not, reinstate the old alternate settings */
 	if (retval < 0) {
 reset_old_alts:
-		for (; i >= 0; i--) {
+		for (i--; i >= 0; i--) {
 			struct usb_interface *intf = config->interface[i];
 			struct usb_host_interface *alt;
 
@@ -1843,7 +1843,6 @@ free_interfaces:
 		intf->dev.dma_mask = dev->dev.dma_mask;
 		INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
 		device_initialize(&intf->dev);
-		mark_quiesced(intf);
 		dev_set_name(&intf->dev, "%d-%s:%d.%d",
 			dev->bus->busnum, dev->devpath,
 			configuration, alt->desc.bInterfaceNumber);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index ab93918d9207..f073c5cb4e7b 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -103,10 +103,19 @@ void usb_detect_quirks(struct usb_device *udev)
 		dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
 				udev->quirks);
 
-	/* By default, disable autosuspend for all non-hubs */
 #ifdef	CONFIG_USB_SUSPEND
-	if (udev->descriptor.bDeviceClass != USB_CLASS_HUB)
-		udev->autosuspend_disabled = 1;
+
+	/* By default, disable autosuspend for all devices.  The hub driver
+	 * will enable it for hubs.
+	 */
+	usb_disable_autosuspend(udev);
+
+	/* Autosuspend can also be disabled if the initial autosuspend_delay
+	 * is negative.
+	 */
+	if (udev->autosuspend_delay < 0)
+		usb_autoresume_device(udev);
+
 #endif
 
 	/* For the present, all devices default to USB-PERSIST enabled */
@@ -120,6 +129,7 @@ void usb_detect_quirks(struct usb_device *udev)
 	 * for all devices.  It will affect things like hub resets
 	 * and EMF-related port disables.
 	 */
-	udev->persist_enabled = 1;
+	if (!(udev->quirks & USB_QUIRK_RESET_MORPHS))
+		udev->persist_enabled = 1;
 #endif	/* CONFIG_PM */
 }
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 5f3908f6e2dc..43c002e3a9aa 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -115,7 +115,7 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf)
 	case USB_SPEED_HIGH:
 		speed = "480";
 		break;
-	case USB_SPEED_VARIABLE:
+	case USB_SPEED_WIRELESS:
 		speed = "480";
 		break;
 	case USB_SPEED_SUPER:
@@ -191,6 +191,36 @@ show_quirks(struct device *dev, struct device_attribute *attr, char *buf)
 static DEVICE_ATTR(quirks, S_IRUGO, show_quirks, NULL);
 
 static ssize_t
+show_avoid_reset_quirk(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sprintf(buf, "%d\n", !!(udev->quirks & USB_QUIRK_RESET_MORPHS));
+}
+
+static ssize_t
+set_avoid_reset_quirk(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int			config;
+
+	if (sscanf(buf, "%d", &config) != 1 || config < 0 || config > 1)
+		return -EINVAL;
+	usb_lock_device(udev);
+	if (config)
+		udev->quirks |= USB_QUIRK_RESET_MORPHS;
+	else
+		udev->quirks &= ~USB_QUIRK_RESET_MORPHS;
+	usb_unlock_device(udev);
+	return count;
+}
+
+static DEVICE_ATTR(avoid_reset_quirk, S_IRUGO | S_IWUSR,
+		show_avoid_reset_quirk, set_avoid_reset_quirk);
+
+static ssize_t
 show_urbnum(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct usb_device *udev;
@@ -226,9 +256,10 @@ set_persist(struct device *dev, struct device_attribute *attr,
 
 	if (sscanf(buf, "%d", &value) != 1)
 		return -EINVAL;
-	usb_pm_lock(udev);
+
+	usb_lock_device(udev);
 	udev->persist_enabled = !!value;
-	usb_pm_unlock(udev);
+	usb_unlock_device(udev);
 	return count;
 }
 
@@ -315,20 +346,34 @@ set_autosuspend(struct device *dev, struct device_attribute *attr,
 		const char *buf, size_t count)
 {
 	struct usb_device *udev = to_usb_device(dev);
-	int value;
+	int value, old_delay;
+	int rc;
 
 	if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/HZ ||
 			value <= - INT_MAX/HZ)
 		return -EINVAL;
 	value *= HZ;
 
+	usb_lock_device(udev);
+	old_delay = udev->autosuspend_delay;
 	udev->autosuspend_delay = value;
-	if (value >= 0)
-		usb_try_autosuspend_device(udev);
-	else {
-		if (usb_autoresume_device(udev) == 0)
+
+	if (old_delay < 0) {	/* Autosuspend wasn't allowed */
+		if (value >= 0)
 			usb_autosuspend_device(udev);
+	} else {		/* Autosuspend was allowed */
+		if (value < 0) {
+			rc = usb_autoresume_device(udev);
+			if (rc < 0) {
+				count = rc;
+				udev->autosuspend_delay = old_delay;
+			}
+		} else {
+			usb_try_autosuspend_device(udev);
+		}
 	}
+
+	usb_unlock_device(udev);
 	return count;
 }
 
@@ -356,34 +401,25 @@ set_level(struct device *dev, struct device_attribute *attr,
 	struct usb_device *udev = to_usb_device(dev);
 	int len = count;
 	char *cp;
-	int rc = 0;
-	int old_autosuspend_disabled;
+	int rc;
 
 	cp = memchr(buf, '\n', count);
 	if (cp)
 		len = cp - buf;
 
 	usb_lock_device(udev);
-	old_autosuspend_disabled = udev->autosuspend_disabled;
 
-	/* Setting the flags without calling usb_pm_lock is a subject to
-	 * races, but who cares...
-	 */
 	if (len == sizeof on_string - 1 &&
-			strncmp(buf, on_string, len) == 0) {
-		udev->autosuspend_disabled = 1;
-		rc = usb_external_resume_device(udev, PMSG_USER_RESUME);
+			strncmp(buf, on_string, len) == 0)
+		rc = usb_disable_autosuspend(udev);
 
-	} else if (len == sizeof auto_string - 1 &&
-			strncmp(buf, auto_string, len) == 0) {
-		udev->autosuspend_disabled = 0;
-		rc = usb_external_resume_device(udev, PMSG_USER_RESUME);
+	else if (len == sizeof auto_string - 1 &&
+			strncmp(buf, auto_string, len) == 0)
+		rc = usb_enable_autosuspend(udev);
 
-	} else
+	else
 		rc = -EINVAL;
 
-	if (rc)
-		udev->autosuspend_disabled = old_autosuspend_disabled;
 	usb_unlock_device(udev);
 	return (rc < 0 ? rc : count);
 }
@@ -558,6 +594,7 @@ static struct attribute *dev_attrs[] = {
 	&dev_attr_version.attr,
 	&dev_attr_maxchild.attr,
 	&dev_attr_quirks.attr,
+	&dev_attr_avoid_reset_quirk.attr,
 	&dev_attr_authorized.attr,
 	&dev_attr_remove.attr,
 	NULL,
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index e7cae1334693..27080561a1c2 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -387,6 +387,13 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	{
 	unsigned int	orig_flags = urb->transfer_flags;
 	unsigned int	allowed;
+	static int pipetypes[4] = {
+		PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
+	};
+
+	/* Check that the pipe's type matches the endpoint's type */
+	if (usb_pipetype(urb->pipe) != pipetypes[xfertype])
+		return -EPIPE;		/* The most suitable error code :-) */
 
 	/* enforce simple/standard policy */
 	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP |
@@ -430,7 +437,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	case USB_ENDPOINT_XFER_INT:
 		/* too small? */
 		switch (dev->speed) {
-		case USB_SPEED_VARIABLE:
+		case USB_SPEED_WIRELESS:
 			if (urb->interval < 6)
 				return -EINVAL;
 			break;
@@ -446,7 +453,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 			if (urb->interval > (1 << 15))
 				return -EINVAL;
 			max = 1 << 15;
-		case USB_SPEED_VARIABLE:
+		case USB_SPEED_WIRELESS:
 			if (urb->interval > 16)
 				return -EINVAL;
 			break;
@@ -473,7 +480,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 		default:
 			return -EINVAL;
 		}
-		if (dev->speed != USB_SPEED_VARIABLE) {
+		if (dev->speed != USB_SPEED_WIRELESS) {
 			/* Round down to a power of 2, no more than max */
 			urb->interval = min(max, 1 << ilog2(urb->interval));
 		}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 0daff0d968ba..1297e9b16a51 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -49,9 +49,6 @@ const char *usbcore_name = "usbcore";
 
 static int nousb;	/* Disable USB when built into kernel image */
 
-/* Workqueue for autosuspend and for remote wakeup of root hubs */
-struct workqueue_struct *ksuspend_usb_wq;
-
 #ifdef	CONFIG_USB_SUSPEND
 static int usb_autosuspend_delay = 2;		/* Default delay value,
 						 * in seconds */
@@ -228,9 +225,6 @@ static void usb_release_dev(struct device *dev)
 	hcd = bus_to_hcd(udev->bus);
 
 	usb_destroy_configuration(udev);
-	/* Root hubs aren't real devices, so don't free HCD resources */
-	if (hcd->driver->free_dev && udev->parent)
-		hcd->driver->free_dev(hcd, udev);
 	usb_put_hcd(hcd);
 	kfree(udev->product);
 	kfree(udev->manufacturer);
@@ -264,23 +258,6 @@ static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
 
 #ifdef	CONFIG_PM
 
-static int ksuspend_usb_init(void)
-{
-	/* This workqueue is supposed to be both freezable and
-	 * singlethreaded.  Its job doesn't justify running on more
-	 * than one CPU.
-	 */
-	ksuspend_usb_wq = create_freezeable_workqueue("ksuspend_usbd");
-	if (!ksuspend_usb_wq)
-		return -ENOMEM;
-	return 0;
-}
-
-static void ksuspend_usb_cleanup(void)
-{
-	destroy_workqueue(ksuspend_usb_wq);
-}
-
 /* USB device Power-Management thunks.
  * There's no need to distinguish here between quiescing a USB device
  * and powering it down; the generic_suspend() routine takes care of
@@ -296,7 +273,7 @@ static int usb_dev_prepare(struct device *dev)
 static void usb_dev_complete(struct device *dev)
 {
 	/* Currently used only for rebinding interfaces */
-	usb_resume(dev, PMSG_RESUME);	/* Message event is meaningless */
+	usb_resume(dev, PMSG_ON);	/* FIXME: change to PMSG_COMPLETE */
 }
 
 static int usb_dev_suspend(struct device *dev)
@@ -342,9 +319,7 @@ static const struct dev_pm_ops usb_device_pm_ops = {
 
 #else
 
-#define ksuspend_usb_init()	0
-#define ksuspend_usb_cleanup()	do {} while (0)
-#define usb_device_pm_ops	(*(struct dev_pm_ops *)0)
+#define usb_device_pm_ops	(*(struct dev_pm_ops *) NULL)
 
 #endif	/* CONFIG_PM */
 
@@ -472,9 +447,6 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	INIT_LIST_HEAD(&dev->filelist);
 
 #ifdef	CONFIG_PM
-	mutex_init(&dev->pm_mutex);
-	INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work);
-	INIT_WORK(&dev->autoresume, usb_autoresume_work);
 	dev->autosuspend_delay = usb_autosuspend_delay * HZ;
 	dev->connect_time = jiffies;
 	dev->active_duration = -jiffies;
@@ -1117,9 +1089,6 @@ static int __init usb_init(void)
 	if (retval)
 		goto out;
 
-	retval = ksuspend_usb_init();
-	if (retval)
-		goto out;
 	retval = bus_register(&usb_bus_type);
 	if (retval)
 		goto bus_register_failed;
@@ -1159,7 +1128,7 @@ major_init_failed:
 bus_notifier_failed:
 	bus_unregister(&usb_bus_type);
 bus_register_failed:
-	ksuspend_usb_cleanup();
+	usb_debugfs_cleanup();
 out:
 	return retval;
 }
@@ -1181,7 +1150,6 @@ static void __exit usb_exit(void)
 	usb_hub_cleanup();
 	bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
 	bus_unregister(&usb_bus_type);
-	ksuspend_usb_cleanup();
 	usb_debugfs_cleanup();
 }
 
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 4c36c7f512a0..cd882203ad34 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -55,24 +55,8 @@ extern void usb_major_cleanup(void);
 extern int usb_suspend(struct device *dev, pm_message_t msg);
 extern int usb_resume(struct device *dev, pm_message_t msg);
 
-extern void usb_autosuspend_work(struct work_struct *work);
-extern void usb_autoresume_work(struct work_struct *work);
 extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg);
 extern int usb_port_resume(struct usb_device *dev, pm_message_t msg);
-extern int usb_external_suspend_device(struct usb_device *udev,
-		pm_message_t msg);
-extern int usb_external_resume_device(struct usb_device *udev,
-		pm_message_t msg);
-
-static inline void usb_pm_lock(struct usb_device *udev)
-{
-	mutex_lock_nested(&udev->pm_mutex, udev->level);
-}
-
-static inline void usb_pm_unlock(struct usb_device *udev)
-{
-	mutex_unlock(&udev->pm_mutex);
-}
 
 #else
 
@@ -86,9 +70,6 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	return 0;
 }
 
-static inline void usb_pm_lock(struct usb_device *udev) {}
-static inline void usb_pm_unlock(struct usb_device *udev) {}
-
 #endif
 
 #ifdef CONFIG_USB_SUSPEND
@@ -96,6 +77,7 @@ static inline void usb_pm_unlock(struct usb_device *udev) {}
 extern void usb_autosuspend_device(struct usb_device *udev);
 extern void usb_try_autosuspend_device(struct usb_device *udev);
 extern int usb_autoresume_device(struct usb_device *udev);
+extern int usb_remote_wakeup(struct usb_device *dev);
 
 #else
 
@@ -106,9 +88,13 @@ static inline int usb_autoresume_device(struct usb_device *udev)
 	return 0;
 }
 
+static inline int usb_remote_wakeup(struct usb_device *udev)
+{
+	return 0;
+}
+
 #endif
 
-extern struct workqueue_struct *ksuspend_usb_wq;
 extern struct bus_type usb_bus_type;
 extern struct device_type usb_device_type;
 extern struct device_type usb_if_device_type;
@@ -138,23 +124,6 @@ static inline int is_usb_device_driver(struct device_driver *drv)
 			for_devices;
 }
 
-/* Interfaces and their "power state" are owned by usbcore */
-
-static inline void mark_active(struct usb_interface *f)
-{
-	f->is_active = 1;
-}
-
-static inline void mark_quiesced(struct usb_interface *f)
-{
-	f->is_active = 0;
-}
-
-static inline int is_active(const struct usb_interface *f)
-{
-	return f->is_active;
-}
-
 
 /* for labeling diagnostics */
 extern const char *usbcore_name;
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 2958a1271b20..6e98a3697844 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -66,8 +66,6 @@ static struct ehci_dev ehci_dev;
 
 #define USB_DEBUG_DEVNUM 127
 
-#define DBGP_DATA_TOGGLE	0x8800
-
 #ifdef DBGP_DEBUG
 #define dbgp_printk printk
 static void dbgp_ehci_status(char *str)
@@ -88,11 +86,6 @@ static inline void dbgp_ehci_status(char *str) { }
 static inline void dbgp_printk(const char *fmt, ...) { }
 #endif
 
-static inline u32 dbgp_pid_update(u32 x, u32 tok)
-{
-	return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff);
-}
-
 static inline u32 dbgp_len_update(u32 x, u32 len)
 {
 	return (x & ~0x0f) | (len & 0x0f);
@@ -136,6 +129,19 @@ static inline u32 dbgp_len_update(u32 x, u32 len)
 
 #define DBGP_MAX_PACKET		8
 #define DBGP_TIMEOUT		(250 * 1000)
+#define DBGP_LOOPS		1000
+
+static inline u32 dbgp_pid_write_update(u32 x, u32 tok)
+{
+	static int data0 = USB_PID_DATA1;
+	data0 ^= USB_PID_DATA_TOGGLE;
+	return (x & 0xffff0000) | (data0 << 8) | (tok & 0xff);
+}
+
+static inline u32 dbgp_pid_read_update(u32 x, u32 tok)
+{
+	return (x & 0xffff0000) | (USB_PID_DATA0 << 8) | (tok & 0xff);
+}
 
 static int dbgp_wait_until_complete(void)
 {
@@ -180,7 +186,7 @@ static int dbgp_wait_until_done(unsigned ctrl)
 {
 	u32 pids, lpid;
 	int ret;
-	int loop = 3;
+	int loop = DBGP_LOOPS;
 
 retry:
 	writel(ctrl | DBGP_GO, &ehci_debug->control);
@@ -197,6 +203,8 @@ retry:
 		 */
 		if (ret == -DBGP_TIMEOUT && !dbgp_not_safe)
 			dbgp_not_safe = 1;
+		if (ret == -DBGP_ERR_BAD && --loop > 0)
+			goto retry;
 		return ret;
 	}
 
@@ -245,12 +253,20 @@ static inline void dbgp_get_data(void *buf, int size)
 		bytes[i] = (hi >> (8*(i - 4))) & 0xff;
 }
 
-static int dbgp_out(u32 addr, const char *bytes, int size)
+static int dbgp_bulk_write(unsigned devnum, unsigned endpoint,
+			 const char *bytes, int size)
 {
+	int ret;
+	u32 addr;
 	u32 pids, ctrl;
 
+	if (size > DBGP_MAX_PACKET)
+		return -1;
+
+	addr = DBGP_EPADDR(devnum, endpoint);
+
 	pids = readl(&ehci_debug->pids);
-	pids = dbgp_pid_update(pids, USB_PID_OUT);
+	pids = dbgp_pid_write_update(pids, USB_PID_OUT);
 
 	ctrl = readl(&ehci_debug->control);
 	ctrl = dbgp_len_update(ctrl, size);
@@ -260,34 +276,7 @@ static int dbgp_out(u32 addr, const char *bytes, int size)
 	dbgp_set_data(bytes, size);
 	writel(addr, &ehci_debug->address);
 	writel(pids, &ehci_debug->pids);
-	return dbgp_wait_until_done(ctrl);
-}
-
-static int dbgp_bulk_write(unsigned devnum, unsigned endpoint,
-			 const char *bytes, int size)
-{
-	int ret;
-	int loops = 5;
-	u32 addr;
-	if (size > DBGP_MAX_PACKET)
-		return -1;
-
-	addr = DBGP_EPADDR(devnum, endpoint);
-try_again:
-	if (loops--) {
-		ret = dbgp_out(addr, bytes, size);
-		if (ret == -DBGP_ERR_BAD) {
-			int try_loops = 3;
-			do {
-				/* Emit a dummy packet to re-sync communication
-				 * with the debug device */
-				if (dbgp_out(addr, "12345678", 8) >= 0) {
-					udelay(2);
-					goto try_again;
-				}
-			} while (try_loops--);
-		}
-	}
+	ret = dbgp_wait_until_done(ctrl);
 
 	return ret;
 }
@@ -304,7 +293,7 @@ static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data,
 	addr = DBGP_EPADDR(devnum, endpoint);
 
 	pids = readl(&ehci_debug->pids);
-	pids = dbgp_pid_update(pids, USB_PID_IN);
+	pids = dbgp_pid_read_update(pids, USB_PID_IN);
 
 	ctrl = readl(&ehci_debug->control);
 	ctrl = dbgp_len_update(ctrl, size);
@@ -362,7 +351,6 @@ static int dbgp_control_msg(unsigned devnum, int requesttype,
 	return dbgp_bulk_read(devnum, 0, data, size);
 }
 
-
 /* Find a PCI capability */
 static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap)
 {
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index ee411206c699..7460cd797f45 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -812,6 +812,16 @@ config USB_CDC_COMPOSITE
 	  Say "y" to link the driver statically, or "m" to build a
 	  dynamically linked module.
 
+config USB_G_NOKIA
+	tristate "Nokia composite gadget"
+	depends on PHONET
+	help
+	  The Nokia composite gadget provides support for acm, obex
+	  and phonet in only one composite gadget driver.
+
+	  It's only really useful for N900 hardware. If you're building
+	  a kernel for N900, say Y or M here. If unsure, say N.
+
 config USB_G_MULTI
 	tristate "Multifunction Composite Gadget (EXPERIMENTAL)"
 	depends on BLOCK && NET
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 2e2c047262b7..43b51da8d727 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -43,6 +43,7 @@ g_mass_storage-objs		:= mass_storage.o
 g_printer-objs			:= printer.o
 g_cdc-objs			:= cdc2.o
 g_multi-objs			:= multi.o
+g_nokia-objs			:= nokia.o
 
 obj-$(CONFIG_USB_ZERO)		+= g_zero.o
 obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
@@ -55,4 +56,5 @@ obj-$(CONFIG_USB_G_PRINTER)	+= g_printer.o
 obj-$(CONFIG_USB_MIDI_GADGET)	+= g_midi.o
 obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o
 obj-$(CONFIG_USB_G_MULTI)	+= g_multi.o
+obj-$(CONFIG_USB_G_NOKIA)	+= g_nokia.o
 
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 043e04db2a05..12ac9cd32a07 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1656,9 +1656,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
 	if (!res)
 		return -ENXIO;
 
-	if (!request_mem_region(res->start,
-			res->end - res->start + 1,
-			driver_name)) {
+	if (!request_mem_region(res->start, resource_size(res), driver_name)) {
 		DBG("someone's using UDC memory\n");
 		return -EBUSY;
 	}
@@ -1699,7 +1697,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
 		udc->ep[3].maxpacket = 64;
 	}
 
-	udc->udp_baseaddr = ioremap(res->start, res->end - res->start + 1);
+	udc->udp_baseaddr = ioremap(res->start, resource_size(res));
 	if (!udc->udp_baseaddr) {
 		retval = -ENOMEM;
 		goto fail0a;
@@ -1781,7 +1779,7 @@ fail0a:
 	if (cpu_is_at91rm9200())
 		gpio_free(udc->board.pullup_pin);
 fail0:
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 	DBG("%s probe failed, %d\n", driver_name, retval);
 	return retval;
 }
@@ -1813,7 +1811,7 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 		gpio_free(udc->board.pullup_pin);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 
 	clk_put(udc->iclk);
 	clk_put(udc->fclk);
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 4e970cf0e29a..f79bdfe4bed9 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -320,7 +320,7 @@ static inline void usba_cleanup_debugfs(struct usba_udc *udc)
 static int vbus_is_present(struct usba_udc *udc)
 {
 	if (gpio_is_valid(udc->vbus_pin))
-		return gpio_get_value(udc->vbus_pin);
+		return gpio_get_value(udc->vbus_pin) ^ udc->vbus_pin_inverted;
 
 	/* No Vbus detection: Assume always present */
 	return 1;
@@ -1763,7 +1763,7 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
 	if (!udc->driver)
 		goto out;
 
-	vbus = gpio_get_value(udc->vbus_pin);
+	vbus = vbus_is_present(udc);
 	if (vbus != udc->vbus_prev) {
 		if (vbus) {
 			toggle_bias(1);
@@ -1914,14 +1914,14 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	udc->vbus_pin = -ENODEV;
 
 	ret = -ENOMEM;
-	udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	udc->regs = ioremap(regs->start, resource_size(regs));
 	if (!udc->regs) {
 		dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
 		goto err_map_regs;
 	}
 	dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
 		 (unsigned long)regs->start, udc->regs);
-	udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
+	udc->fifo = ioremap(fifo->start, resource_size(fifo));
 	if (!udc->fifo) {
 		dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
 		goto err_map_fifo;
@@ -2000,6 +2000,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	if (gpio_is_valid(pdata->vbus_pin)) {
 		if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
 			udc->vbus_pin = pdata->vbus_pin;
+			udc->vbus_pin_inverted = pdata->vbus_pin_inverted;
 
 			ret = request_irq(gpio_to_irq(udc->vbus_pin),
 					usba_vbus_irq, 0,
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
index f7baea307f0d..88a2e07a11a8 100644
--- a/drivers/usb/gadget/atmel_usba_udc.h
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -323,6 +323,7 @@ struct usba_udc {
 	struct platform_device *pdev;
 	int irq;
 	int vbus_pin;
+	int vbus_pin_inverted;
 	struct clk *pclk;
 	struct clk *hclk;
 
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index cd0914ec898e..65a5f94cbc04 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -265,16 +265,24 @@ struct usb_ep * __init usb_ep_autoconfig (
 				return ep;
 		}
 
-	} else if (gadget_is_sh (gadget) && USB_ENDPOINT_XFER_INT == type) {
-		/* single buffering is enough; maybe 8 byte fifo is too */
-		ep = find_ep (gadget, "ep3in-bulk");
-		if (ep && ep_matches (gadget, ep, desc))
-			return ep;
-
-	} else if (gadget_is_mq11xx (gadget) && USB_ENDPOINT_XFER_INT == type) {
-		ep = find_ep (gadget, "ep1-bulk");
+#ifdef CONFIG_BLACKFIN
+	} else if (gadget_is_musbhsfc(gadget) || gadget_is_musbhdrc(gadget)) {
+		if ((USB_ENDPOINT_XFER_BULK == type) ||
+		    (USB_ENDPOINT_XFER_ISOC == type)) {
+			if (USB_DIR_IN & desc->bEndpointAddress)
+				ep = find_ep (gadget, "ep5in");
+			else
+				ep = find_ep (gadget, "ep6out");
+		} else if (USB_ENDPOINT_XFER_INT == type) {
+			if (USB_DIR_IN & desc->bEndpointAddress)
+				ep = find_ep(gadget, "ep1in");
+			else
+				ep = find_ep(gadget, "ep2out");
+		} else
+			ep = NULL;
 		if (ep && ep_matches (gadget, ep, desc))
 			return ep;
+#endif
 	}
 
 	/* Second, look at endpoints until an unclaimed one looks usable */
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 141372b6e7a1..400f80372d93 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -259,7 +259,7 @@ static struct usb_configuration rndis_config_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef USB_ETH_EEM
+#ifdef CONFIG_USB_ETH_EEM
 static int use_eem = 1;
 #else
 static int use_eem;
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index d10353d46b86..e49c7325dce2 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -702,14 +702,6 @@ acm_unbind(struct usb_configuration *c, struct usb_function *f)
 /* Some controllers can't support CDC ACM ... */
 static inline bool can_support_cdc(struct usb_configuration *c)
 {
-	/* SH3 doesn't support multiple interfaces */
-	if (gadget_is_sh(c->cdev->gadget))
-		return false;
-
-	/* sa1100 doesn't have a third interrupt endpoint */
-	if (gadget_is_sa1100(c->cdev->gadget))
-		return false;
-
 	/* everything else is *probably* fine ... */
 	return true;
 }
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index ecf5bdd0ae06..2fff530efc19 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -497,12 +497,9 @@ static int ecm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 			struct net_device	*net;
 
 			/* Enable zlps by default for ECM conformance;
-			 * override for musb_hdrc (avoids txdma ovhead)
-			 * and sa1100 (can't).
+			 * override for musb_hdrc (avoids txdma ovhead).
 			 */
-			ecm->port.is_zlp_ok = !(
-				   gadget_is_sa1100(cdev->gadget)
-				|| gadget_is_musbhdrc(cdev->gadget)
+			ecm->port.is_zlp_ok = !(gadget_is_musbhdrc(cdev->gadget)
 				);
 			ecm->port.cdc_filter = DEFAULT_FILTER;
 			DBG(cdev, "activate ecm\n");
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index a37640eba434..b1935fe156a0 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -368,7 +368,7 @@ struct fsg_common {
 	struct task_struct	*thread_task;
 
 	/* Callback function to call when thread exits. */
-	void			(*thread_exits)(struct fsg_common *common);
+	int			(*thread_exits)(struct fsg_common *common);
 	/* Gadget's private data. */
 	void			*private_data;
 
@@ -392,8 +392,12 @@ struct fsg_config {
 	const char		*lun_name_format;
 	const char		*thread_name;
 
-	/* Callback function to call when thread exits. */
-	void			(*thread_exits)(struct fsg_common *common);
+	/* Callback function to call when thread exits.  If no
+	 * callback is set or it returns value lower then zero MSF
+	 * will force eject all LUNs it operates on (including those
+	 * marked as non-removable or with prevent_medium_removal flag
+	 * set). */
+	int			(*thread_exits)(struct fsg_common *common);
 	/* Gadget's private data. */
 	void			*private_data;
 
@@ -614,7 +618,12 @@ static int fsg_setup(struct usb_function *f,
 			return -EDOM;
 		VDBG(fsg, "get max LUN\n");
 		*(u8 *) req->buf = fsg->common->nluns - 1;
-		return 1;
+
+		/* Respond with data/status */
+		req->length = min((u16)1, w_length);
+		fsg->common->ep0req_name =
+			ctrl->bRequestType & USB_DIR_IN ? "ep0-in" : "ep0-out";
+		return ep0_queue(fsg->common);
 	}
 
 	VDBG(fsg,
@@ -2524,14 +2533,6 @@ static void handle_exception(struct fsg_common *common)
 
 	case FSG_STATE_CONFIG_CHANGE:
 		rc = do_set_config(common, new_config);
-		if (common->ep0_req_tag != exception_req_tag)
-			break;
-		if (rc != 0) {			/* STALL on errors */
-			DBG(common, "ep0 set halt\n");
-			usb_ep_set_halt(common->ep0);
-		} else {			/* Complete the status stage */
-			ep0_queue(common);
-		}
 		break;
 
 	case FSG_STATE_EXIT:
@@ -2615,8 +2616,20 @@ static int fsg_main_thread(void *common_)
 	common->thread_task = NULL;
 	spin_unlock_irq(&common->lock);
 
-	if (common->thread_exits)
-		common->thread_exits(common);
+	if (!common->thread_exits || common->thread_exits(common) < 0) {
+		struct fsg_lun *curlun = common->luns;
+		unsigned i = common->nluns;
+
+		down_write(&common->filesem);
+		for (; i--; ++curlun) {
+			if (!fsg_lun_is_open(curlun))
+				continue;
+
+			fsg_lun_close(curlun);
+			curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
+		}
+		up_write(&common->filesem);
+	}
 
 	/* Let the unbind and cleanup routines know the thread has exited */
 	complete_and_exit(&common->thread_notifier, 0);
@@ -2763,10 +2776,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 	if (cfg->release != 0xffff) {
 		i = cfg->release;
 	} else {
-		/* The sa1100 controller is not supported */
-		i = gadget_is_sa1100(gadget)
-			? -1
-			: usb_gadget_controller_number(gadget);
+		i = usb_gadget_controller_number(gadget);
 		if (i >= 0) {
 			i = 0x0300 + i;
 		} else {
@@ -2791,8 +2801,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 	 * disable stalls.
 	 */
 	common->can_stall = cfg->can_stall &&
-		!(gadget_is_sh(common->gadget) ||
-		  gadget_is_at91(common->gadget));
+		!(gadget_is_at91(common->gadget));
 
 
 	spin_lock_init(&common->lock);
@@ -2852,7 +2861,6 @@ error_release:
 	/* Call fsg_common_release() directly, ref might be not
 	 * initialised */
 	fsg_common_release(&common->ref);
-	complete(&common->thread_notifier);
 	return ERR_PTR(rc);
 }
 
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 95dae4c1ea40..a30e60c7f129 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -769,10 +769,6 @@ rndis_unbind(struct usb_configuration *c, struct usb_function *f)
 /* Some controllers can't support RNDIS ... */
 static inline bool can_support_rndis(struct usb_configuration *c)
 {
-	/* only two endpoints on sa1100 */
-	if (gadget_is_sa1100(c->cdev->gadget))
-		return false;
-
 	/* everything else is *presumably* fine */
 	return true;
 }
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 29dfb0277ffb..a90dd2db0488 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3208,15 +3208,11 @@ static int __init check_parameters(struct fsg_dev *fsg)
 	 * halt bulk endpoints correctly.  If one of them is present,
 	 * disable stalls.
 	 */
-	if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget))
+	if (gadget_is_at91(fsg->gadget))
 		mod_data.can_stall = 0;
 
 	if (mod_data.release == 0xffff) {	// Parameter wasn't set
-		/* The sa1100 controller is not supported */
-		if (gadget_is_sa1100(fsg->gadget))
-			gcnum = -1;
-		else
-			gcnum = usb_gadget_controller_number(fsg->gadget);
+		gcnum = usb_gadget_controller_number(fsg->gadget);
 		if (gcnum >= 0)
 			mod_data.release = 0x0300 + gcnum;
 		else {
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 7881f12413c4..3537d51073b2 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2749,7 +2749,7 @@ static int __devexit qe_udc_remove(struct of_device *ofdev)
 }
 
 /*-------------------------------------------------------------------------*/
-static struct of_device_id __devinitdata qe_udc_match[] = {
+static const struct of_device_id qe_udc_match[] __devinitconst = {
 	{
 		.compatible = "fsl,mpc8323-qe-usb",
 		.data = (void *)PORT_QE,
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index f2d270b202f2..1edbc12fff18 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -45,46 +45,18 @@
 #define	gadget_is_goku(g)	0
 #endif
 
-/* SH3 UDC -- not yet ported 2.4 --> 2.6 */
-#ifdef CONFIG_USB_GADGET_SUPERH
-#define	gadget_is_sh(g)		!strcmp("sh_udc", (g)->name)
-#else
-#define	gadget_is_sh(g)		0
-#endif
-
-/* not yet stable on 2.6 (would help "original Zaurus") */
-#ifdef CONFIG_USB_GADGET_SA1100
-#define	gadget_is_sa1100(g)	!strcmp("sa1100_udc", (g)->name)
-#else
-#define	gadget_is_sa1100(g)	0
-#endif
-
 #ifdef CONFIG_USB_GADGET_LH7A40X
 #define	gadget_is_lh7a40x(g)	!strcmp("lh7a40x_udc", (g)->name)
 #else
 #define	gadget_is_lh7a40x(g)	0
 #endif
 
-/* handhelds.org tree (?) */
-#ifdef CONFIG_USB_GADGET_MQ11XX
-#define	gadget_is_mq11xx(g)	!strcmp("mq11xx_udc", (g)->name)
-#else
-#define	gadget_is_mq11xx(g)	0
-#endif
-
 #ifdef CONFIG_USB_GADGET_OMAP
 #define	gadget_is_omap(g)	!strcmp("omap_udc", (g)->name)
 #else
 #define	gadget_is_omap(g)	0
 #endif
 
-/* not yet ported 2.4 --> 2.6 */
-#ifdef CONFIG_USB_GADGET_N9604
-#define	gadget_is_n9604(g)	!strcmp("n9604_udc", (g)->name)
-#else
-#define	gadget_is_n9604(g)	0
-#endif
-
 /* various unstable versions available */
 #ifdef CONFIG_USB_GADGET_PXA27X
 #define	gadget_is_pxa27x(g)	!strcmp("pxa27x_udc", (g)->name)
@@ -122,14 +94,6 @@
 #define gadget_is_fsl_usb2(g)	0
 #endif
 
-/* Mentor high speed function controller */
-/* from Montavista kernel (?) */
-#ifdef CONFIG_USB_GADGET_MUSBHSFC
-#define gadget_is_musbhsfc(g)	!strcmp("musbhsfc_udc", (g)->name)
-#else
-#define gadget_is_musbhsfc(g)	0
-#endif
-
 /* Mentor high speed "dual role" controller, in peripheral role */
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 #define gadget_is_musbhdrc(g)	!strcmp("musb_hdrc", (g)->name)
@@ -143,13 +107,6 @@
 #define gadget_is_langwell(g)	0
 #endif
 
-/* from Montavista kernel (?) */
-#ifdef CONFIG_USB_GADGET_MPC8272
-#define gadget_is_mpc8272(g)	!strcmp("mpc8272_udc", (g)->name)
-#else
-#define gadget_is_mpc8272(g)	0
-#endif
-
 #ifdef CONFIG_USB_GADGET_M66592
 #define	gadget_is_m66592(g)	!strcmp("m66592_udc", (g)->name)
 #else
@@ -203,20 +160,12 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x02;
 	else if (gadget_is_pxa(gadget))
 		return 0x03;
-	else if (gadget_is_sh(gadget))
-		return 0x04;
-	else if (gadget_is_sa1100(gadget))
-		return 0x05;
 	else if (gadget_is_goku(gadget))
 		return 0x06;
-	else if (gadget_is_mq11xx(gadget))
-		return 0x07;
 	else if (gadget_is_omap(gadget))
 		return 0x08;
 	else if (gadget_is_lh7a40x(gadget))
 		return 0x09;
-	else if (gadget_is_n9604(gadget))
-		return 0x10;
 	else if (gadget_is_pxa27x(gadget))
 		return 0x11;
 	else if (gadget_is_s3c2410(gadget))
@@ -225,12 +174,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x13;
 	else if (gadget_is_imx(gadget))
 		return 0x14;
-	else if (gadget_is_musbhsfc(gadget))
-		return 0x15;
 	else if (gadget_is_musbhdrc(gadget))
 		return 0x16;
-	else if (gadget_is_mpc8272(gadget))
-		return 0x17;
 	else if (gadget_is_atmel_usba(gadget))
 		return 0x18;
 	else if (gadget_is_fsl_usb2(gadget))
@@ -265,10 +210,6 @@ static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
 	if (gadget_is_pxa27x(gadget))
 		return false;
 
-	/* SH3 hardware just doesn't do altsettings */
-	if (gadget_is_sh(gadget))
-		return false;
-
 	/* Everything else is *presumably* fine ... */
 	return true;
 }
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 5f6a2e0a9357..04f6224b7e06 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -618,11 +618,6 @@ gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags)
 	}
 #endif
 
-	if (gadget_is_sa1100(gadget) && dev->config) {
-		/* tx fifo is full, but we can't clear it...*/
-		ERROR(dev, "can't change configurations\n");
-		return -ESPIPE;
-	}
 	gmidi_reset_config(dev);
 
 	switch (number) {
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 112bb40a427c..e8edc640381e 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1859,7 +1859,7 @@ done:
 
 /*-------------------------------------------------------------------------*/
 
-static struct pci_device_id pci_ids [] = { {
+static const struct pci_device_id pci_ids[] = { {
 	.class =	((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
 	.class_mask =	~0,
 	.vendor =	0x102f,		/* Toshiba */
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index bf0f6520c6df..de8a83803505 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -194,7 +194,7 @@ enum ep_state {
 };
 
 struct ep_data {
-	struct semaphore		lock;
+	struct mutex			lock;
 	enum ep_state			state;
 	atomic_t			count;
 	struct dev_data			*dev;
@@ -298,10 +298,10 @@ get_ready_ep (unsigned f_flags, struct ep_data *epdata)
 	int	val;
 
 	if (f_flags & O_NONBLOCK) {
-		if (down_trylock (&epdata->lock) != 0)
+		if (!mutex_trylock(&epdata->lock))
 			goto nonblock;
 		if (epdata->state != STATE_EP_ENABLED) {
-			up (&epdata->lock);
+			mutex_unlock(&epdata->lock);
 nonblock:
 			val = -EAGAIN;
 		} else
@@ -309,7 +309,8 @@ nonblock:
 		return val;
 	}
 
-	if ((val = down_interruptible (&epdata->lock)) < 0)
+	val = mutex_lock_interruptible(&epdata->lock);
+	if (val < 0)
 		return val;
 
 	switch (epdata->state) {
@@ -323,7 +324,7 @@ nonblock:
 		// FALLTHROUGH
 	case STATE_EP_UNBOUND:			/* clean disconnect */
 		val = -ENODEV;
-		up (&epdata->lock);
+		mutex_unlock(&epdata->lock);
 	}
 	return val;
 }
@@ -393,7 +394,7 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 		if (likely (data->ep != NULL))
 			usb_ep_set_halt (data->ep);
 		spin_unlock_irq (&data->dev->lock);
-		up (&data->lock);
+		mutex_unlock(&data->lock);
 		return -EBADMSG;
 	}
 
@@ -411,7 +412,7 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 		value = -EFAULT;
 
 free1:
-	up (&data->lock);
+	mutex_unlock(&data->lock);
 	kfree (kbuf);
 	return value;
 }
@@ -436,7 +437,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		if (likely (data->ep != NULL))
 			usb_ep_set_halt (data->ep);
 		spin_unlock_irq (&data->dev->lock);
-		up (&data->lock);
+		mutex_unlock(&data->lock);
 		return -EBADMSG;
 	}
 
@@ -455,7 +456,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	VDEBUG (data->dev, "%s write %zu IN, status %d\n",
 		data->name, len, (int) value);
 free1:
-	up (&data->lock);
+	mutex_unlock(&data->lock);
 	kfree (kbuf);
 	return value;
 }
@@ -466,7 +467,8 @@ ep_release (struct inode *inode, struct file *fd)
 	struct ep_data		*data = fd->private_data;
 	int value;
 
-	if ((value = down_interruptible(&data->lock)) < 0)
+	value = mutex_lock_interruptible(&data->lock);
+	if (value < 0)
 		return value;
 
 	/* clean up if this can be reopened */
@@ -476,7 +478,7 @@ ep_release (struct inode *inode, struct file *fd)
 		data->hs_desc.bDescriptorType = 0;
 		usb_ep_disable(data->ep);
 	}
-	up (&data->lock);
+	mutex_unlock(&data->lock);
 	put_ep (data);
 	return 0;
 }
@@ -507,7 +509,7 @@ static long ep_ioctl(struct file *fd, unsigned code, unsigned long value)
 	} else
 		status = -ENODEV;
 	spin_unlock_irq (&data->dev->lock);
-	up (&data->lock);
+	mutex_unlock(&data->lock);
 	return status;
 }
 
@@ -673,7 +675,7 @@ fail:
 		value = -ENODEV;
 	spin_unlock_irq(&epdata->dev->lock);
 
-	up(&epdata->lock);
+	mutex_unlock(&epdata->lock);
 
 	if (unlikely(value)) {
 		kfree(priv);
@@ -765,7 +767,8 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	u32			tag;
 	int			value, length = len;
 
-	if ((value = down_interruptible (&data->lock)) < 0)
+	value = mutex_lock_interruptible(&data->lock);
+	if (value < 0)
 		return value;
 
 	if (data->state != STATE_EP_READY) {
@@ -854,7 +857,7 @@ fail:
 		data->desc.bDescriptorType = 0;
 		data->hs_desc.bDescriptorType = 0;
 	}
-	up (&data->lock);
+	mutex_unlock(&data->lock);
 	return value;
 fail0:
 	value = -EINVAL;
@@ -870,7 +873,7 @@ ep_open (struct inode *inode, struct file *fd)
 	struct ep_data		*data = inode->i_private;
 	int			value = -EBUSY;
 
-	if (down_interruptible (&data->lock) != 0)
+	if (mutex_lock_interruptible(&data->lock) != 0)
 		return -EINTR;
 	spin_lock_irq (&data->dev->lock);
 	if (data->dev->state == STATE_DEV_UNBOUND)
@@ -885,7 +888,7 @@ ep_open (struct inode *inode, struct file *fd)
 		DBG (data->dev, "%s state %d\n",
 			data->name, data->state);
 	spin_unlock_irq (&data->dev->lock);
-	up (&data->lock);
+	mutex_unlock(&data->lock);
 	return value;
 }
 
@@ -1631,7 +1634,7 @@ static int activate_ep_files (struct dev_data *dev)
 		if (!data)
 			goto enomem0;
 		data->state = STATE_EP_DISABLED;
-		init_MUTEX (&data->lock);
+		mutex_init(&data->lock);
 		init_waitqueue_head (&data->wait);
 
 		strncpy (data->name, ep->name, sizeof (data->name) - 1);
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 19619fbf20ac..705cc1f76327 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -135,6 +135,12 @@ FSG_MODULE_PARAMETERS(/* no prefix */, mod_data);
 static unsigned long msg_registered = 0;
 static void msg_cleanup(void);
 
+static int msg_thread_exits(struct fsg_common *common)
+{
+	msg_cleanup();
+	return 0;
+}
+
 static int __init msg_do_config(struct usb_configuration *c)
 {
 	struct fsg_common *common;
@@ -147,7 +153,7 @@ static int __init msg_do_config(struct usb_configuration *c)
 	}
 
 	fsg_config_from_params(&config, &mod_data);
-	config.thread_exits = (void(*)(struct fsg_common*))&msg_cleanup;
+	config.thread_exits = msg_thread_exits;
 	common = fsg_common_init(0, c->cdev, &config);
 	if (IS_ERR(common))
 		return PTR_ERR(common);
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
new file mode 100644
index 000000000000..7d6b66a85724
--- /dev/null
+++ b/drivers/usb/gadget/nokia.c
@@ -0,0 +1,259 @@
+/*
+ * nokia.c -- Nokia Composite Gadget Driver
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This gadget driver borrows from serial.c which is:
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 by David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * version 2 of that License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+
+#include "u_serial.h"
+#include "u_ether.h"
+#include "u_phonet.h"
+#include "gadget_chips.h"
+
+/* Defines */
+
+#define NOKIA_VERSION_NUM		0x0211
+#define NOKIA_LONG_NAME			"N900 (PC-Suite Mode)"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module.  So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+#include "composite.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+
+#include "u_serial.c"
+#include "f_acm.c"
+#include "f_ecm.c"
+#include "f_obex.c"
+#include "f_serial.c"
+#include "f_phonet.c"
+#include "u_ether.c"
+
+/*-------------------------------------------------------------------------*/
+
+#define NOKIA_VENDOR_ID			0x0421	/* Nokia */
+#define NOKIA_PRODUCT_ID		0x01c8	/* Nokia Gadget */
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX		0
+#define STRING_PRODUCT_IDX		1
+#define STRING_DESCRIPTION_IDX		2
+
+static char manufacturer_nokia[] = "Nokia";
+static const char product_nokia[] = NOKIA_LONG_NAME;
+static const char description_nokia[] = "PC-Suite Configuration";
+
+static struct usb_string strings_dev[] = {
+	[STRING_MANUFACTURER_IDX].s = manufacturer_nokia,
+	[STRING_PRODUCT_IDX].s = NOKIA_LONG_NAME,
+	[STRING_DESCRIPTION_IDX].s = description_nokia,
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+static struct usb_device_descriptor device_desc = {
+	.bLength		= USB_DT_DEVICE_SIZE,
+	.bDescriptorType	= USB_DT_DEVICE,
+	.bcdUSB			= __constant_cpu_to_le16(0x0200),
+	.bDeviceClass		= USB_CLASS_COMM,
+	.idVendor		= __constant_cpu_to_le16(NOKIA_VENDOR_ID),
+	.idProduct		= __constant_cpu_to_le16(NOKIA_PRODUCT_ID),
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	.bNumConfigurations =	1,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Module */
+MODULE_DESCRIPTION("Nokia composite gadget driver for N900");
+MODULE_AUTHOR("Felipe Balbi");
+MODULE_LICENSE("GPL");
+
+/*-------------------------------------------------------------------------*/
+
+static u8 hostaddr[ETH_ALEN];
+
+static int __init nokia_bind_config(struct usb_configuration *c)
+{
+	int status = 0;
+
+	status = phonet_bind_config(c);
+	if (status)
+		printk(KERN_DEBUG "could not bind phonet config\n");
+
+	status = obex_bind_config(c, 0);
+	if (status)
+		printk(KERN_DEBUG "could not bind obex config %d\n", 0);
+
+	status = obex_bind_config(c, 1);
+	if (status)
+		printk(KERN_DEBUG "could not bind obex config %d\n", 0);
+
+	status = acm_bind_config(c, 2);
+	if (status)
+		printk(KERN_DEBUG "could not bind acm config\n");
+
+	status = ecm_bind_config(c, hostaddr);
+	if (status)
+		printk(KERN_DEBUG "could not bind ecm config\n");
+
+	return status;
+}
+
+static struct usb_configuration nokia_config_500ma_driver = {
+	.label		= "Bus Powered",
+	.bind		= nokia_bind_config,
+	.bConfigurationValue = 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes	= USB_CONFIG_ATT_ONE,
+	.bMaxPower	= 250, /* 500mA */
+};
+
+static struct usb_configuration nokia_config_100ma_driver = {
+	.label		= "Self Powered",
+	.bind		= nokia_bind_config,
+	.bConfigurationValue = 2,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes	= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+	.bMaxPower	= 50, /* 100 mA */
+};
+
+static int __init nokia_bind(struct usb_composite_dev *cdev)
+{
+	int			gcnum;
+	struct usb_gadget	*gadget = cdev->gadget;
+	int			status;
+
+	status = gphonet_setup(cdev->gadget);
+	if (status < 0)
+		goto err_phonet;
+
+	status = gserial_setup(cdev->gadget, 3);
+	if (status < 0)
+		goto err_serial;
+
+	status = gether_setup(cdev->gadget, hostaddr);
+	if (status < 0)
+		goto err_ether;
+
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto err_usb;
+	strings_dev[STRING_MANUFACTURER_IDX].id = status;
+
+	device_desc.iManufacturer = status;
+
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto err_usb;
+	strings_dev[STRING_PRODUCT_IDX].id = status;
+
+	device_desc.iProduct = status;
+
+	/* config description */
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto err_usb;
+	strings_dev[STRING_DESCRIPTION_IDX].id = status;
+
+	nokia_config_500ma_driver.iConfiguration = status;
+	nokia_config_100ma_driver.iConfiguration = status;
+
+	/* set up other descriptors */
+	gcnum = usb_gadget_controller_number(gadget);
+	if (gcnum >= 0)
+		device_desc.bcdDevice = cpu_to_le16(NOKIA_VERSION_NUM);
+	else {
+		/* this should only work with hw that supports altsettings
+		 * and several endpoints, anything else, panic.
+		 */
+		pr_err("nokia_bind: controller '%s' not recognized\n",
+			gadget->name);
+		goto err_usb;
+	}
+
+	/* finaly register the configuration */
+	status = usb_add_config(cdev, &nokia_config_500ma_driver);
+	if (status < 0)
+		goto err_usb;
+
+	status = usb_add_config(cdev, &nokia_config_100ma_driver);
+	if (status < 0)
+		goto err_usb;
+
+	dev_info(&gadget->dev, "%s\n", NOKIA_LONG_NAME);
+
+	return 0;
+
+err_usb:
+	gether_cleanup();
+err_ether:
+	gserial_cleanup();
+err_serial:
+	gphonet_cleanup();
+err_phonet:
+	return status;
+}
+
+static int __exit nokia_unbind(struct usb_composite_dev *cdev)
+{
+	gphonet_cleanup();
+	gserial_cleanup();
+	gether_cleanup();
+
+	return 0;
+}
+
+static struct usb_composite_driver nokia_driver = {
+	.name		= "g_nokia",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.bind		= nokia_bind,
+	.unbind		= __exit_p(nokia_unbind),
+};
+
+static int __init nokia_init(void)
+{
+	return usb_composite_register(&nokia_driver);
+}
+module_init(nokia_init);
+
+static void __exit nokia_cleanup(void)
+{
+	usb_composite_unregister(&nokia_driver);
+}
+module_exit(nokia_cleanup);
+
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 2d867fd22413..6b8bf8c781c4 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -949,12 +949,6 @@ printer_set_config(struct printer_dev *dev, unsigned number)
 	int			result = 0;
 	struct usb_gadget	*gadget = dev->gadget;
 
-	if (gadget_is_sa1100(gadget) && dev->config) {
-		/* tx fifo is full, but we can't clear it...*/
-		INFO(dev, "can't change configurations\n");
-		return -ESPIPE;
-	}
-
 	switch (number) {
 	case DEV_CONFIG_VALUE:
 		result = 0;
@@ -1033,12 +1027,6 @@ set_interface(struct printer_dev *dev, unsigned number)
 {
 	int			result = 0;
 
-	if (gadget_is_sa1100(dev->gadget) && dev->interface < 0) {
-		/* tx fifo is full, but we can't clear it...*/
-		INFO(dev, "can't change interfaces\n");
-		return -ESPIPE;
-	}
-
 	/* Free the current interface */
 	switch (dev->interface) {
 	case PRINTER_INTERFACE:
@@ -1392,12 +1380,6 @@ printer_bind(struct usb_gadget *gadget)
 		goto fail;
 	}
 
-	if (gadget_is_sa1100(gadget)) {
-		/* hardware can't write zero length packets. */
-		ERROR(dev, "SA1100 controller is unsupport by this driver\n");
-		goto fail;
-	}
-
 	gcnum = usb_gadget_controller_number(gadget);
 	if (gcnum >= 0) {
 		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index adda1208a1ec..05b892c3d686 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -742,13 +742,17 @@ static void ep_del_request(struct pxa_ep *ep, struct pxa27x_request *req)
  * @ep: pxa physical endpoint
  * @req: pxa request
  * @status: usb request status sent to gadget API
+ * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held
  *
- * Context: ep->lock held
+ * Context: ep->lock held if flags not NULL, else ep->lock released
  *
  * Retire a pxa27x usb request. Endpoint must be locked.
  */
-static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status)
+static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status,
+	unsigned long *pflags)
 {
+	unsigned long	flags;
+
 	ep_del_request(ep, req);
 	if (likely(req->req.status == -EINPROGRESS))
 		req->req.status = status;
@@ -760,38 +764,48 @@ static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status)
 			&req->req, status,
 			req->req.actual, req->req.length);
 
+	if (pflags)
+		spin_unlock_irqrestore(&ep->lock, *pflags);
+	local_irq_save(flags);
 	req->req.complete(&req->udc_usb_ep->usb_ep, &req->req);
+	local_irq_restore(flags);
+	if (pflags)
+		spin_lock_irqsave(&ep->lock, *pflags);
 }
 
 /**
  * ep_end_out_req - Ends endpoint OUT request
  * @ep: physical endpoint
  * @req: pxa request
+ * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held
  *
- * Context: ep->lock held
+ * Context: ep->lock held or released (see req_done())
  *
  * Ends endpoint OUT request (completes usb request).
  */
-static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
+static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req,
+	unsigned long *pflags)
 {
 	inc_ep_stats_reqs(ep, !USB_DIR_IN);
-	req_done(ep, req, 0);
+	req_done(ep, req, 0, pflags);
 }
 
 /**
  * ep0_end_out_req - Ends control endpoint OUT request (ends data stage)
  * @ep: physical endpoint
  * @req: pxa request
+ * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held
  *
- * Context: ep->lock held
+ * Context: ep->lock held or released (see req_done())
  *
  * Ends control endpoint OUT request (completes usb request), and puts
  * control endpoint into idle state
  */
-static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
+static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req,
+	unsigned long *pflags)
 {
 	set_ep0state(ep->dev, OUT_STATUS_STAGE);
-	ep_end_out_req(ep, req);
+	ep_end_out_req(ep, req, pflags);
 	ep0_idle(ep->dev);
 }
 
@@ -799,31 +813,35 @@ static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
  * ep_end_in_req - Ends endpoint IN request
  * @ep: physical endpoint
  * @req: pxa request
+ * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held
  *
- * Context: ep->lock held
+ * Context: ep->lock held or released (see req_done())
  *
  * Ends endpoint IN request (completes usb request).
  */
-static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
+static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req,
+	unsigned long *pflags)
 {
 	inc_ep_stats_reqs(ep, USB_DIR_IN);
-	req_done(ep, req, 0);
+	req_done(ep, req, 0, pflags);
 }
 
 /**
  * ep0_end_in_req - Ends control endpoint IN request (ends data stage)
  * @ep: physical endpoint
  * @req: pxa request
+ * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held
  *
- * Context: ep->lock held
+ * Context: ep->lock held or released (see req_done())
  *
  * Ends control endpoint IN request (completes usb request), and puts
  * control endpoint into status state
  */
-static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
+static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req,
+	unsigned long *pflags)
 {
 	set_ep0state(ep->dev, IN_STATUS_STAGE);
-	ep_end_in_req(ep, req);
+	ep_end_in_req(ep, req, pflags);
 }
 
 /**
@@ -831,19 +849,22 @@ static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
  * @ep: pxa endpoint
  * @status: usb request status
  *
- * Context: ep->lock held
+ * Context: ep->lock released
  *
  * Dequeues all requests on an endpoint. As a side effect, interrupts will be
  * disabled on that endpoint (because no more requests).
  */
 static void nuke(struct pxa_ep *ep, int status)
 {
-	struct pxa27x_request *req;
+	struct pxa27x_request	*req;
+	unsigned long		flags;
 
+	spin_lock_irqsave(&ep->lock, flags);
 	while (!list_empty(&ep->queue)) {
 		req = list_entry(ep->queue.next, struct pxa27x_request, queue);
-		req_done(ep, req, status);
+		req_done(ep, req, status, &flags);
 	}
+	spin_unlock_irqrestore(&ep->lock, flags);
 }
 
 /**
@@ -1123,6 +1144,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
 	int			rc = 0;
 	int			is_first_req;
 	unsigned		length;
+	int			recursion_detected;
 
 	req = container_of(_req, struct pxa27x_request, req);
 	udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
@@ -1152,6 +1174,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
 		return -EMSGSIZE;
 
 	spin_lock_irqsave(&ep->lock, flags);
+	recursion_detected = ep->in_handle_ep;
 
 	is_first_req = list_empty(&ep->queue);
 	ep_dbg(ep, "queue req %p(first=%s), len %d buf %p\n",
@@ -1161,12 +1184,12 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
 	if (!ep->enabled) {
 		_req->status = -ESHUTDOWN;
 		rc = -ESHUTDOWN;
-		goto out;
+		goto out_locked;
 	}
 
 	if (req->in_use) {
 		ep_err(ep, "refusing to queue req %p (already queued)\n", req);
-		goto out;
+		goto out_locked;
 	}
 
 	length = _req->length;
@@ -1174,12 +1197,13 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
 	_req->actual = 0;
 
 	ep_add_request(ep, req);
+	spin_unlock_irqrestore(&ep->lock, flags);
 
 	if (is_ep0(ep)) {
 		switch (dev->ep0state) {
 		case WAIT_ACK_SET_CONF_INTERF:
 			if (length == 0) {
-				ep_end_in_req(ep, req);
+				ep_end_in_req(ep, req, NULL);
 			} else {
 				ep_err(ep, "got a request of %d bytes while"
 					"in state WAIT_ACK_SET_CONF_INTERF\n",
@@ -1192,12 +1216,12 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
 		case IN_DATA_STAGE:
 			if (!ep_is_full(ep))
 				if (write_ep0_fifo(ep, req))
-					ep0_end_in_req(ep, req);
+					ep0_end_in_req(ep, req, NULL);
 			break;
 		case OUT_DATA_STAGE:
 			if ((length == 0) || !epout_has_pkt(ep))
 				if (read_ep0_fifo(ep, req))
-					ep0_end_out_req(ep, req);
+					ep0_end_out_req(ep, req, NULL);
 			break;
 		default:
 			ep_err(ep, "odd state %s to send me a request\n",
@@ -1207,12 +1231,15 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
 			break;
 		}
 	} else {
-		handle_ep(ep);
+		if (!recursion_detected)
+			handle_ep(ep);
 	}
 
 out:
-	spin_unlock_irqrestore(&ep->lock, flags);
 	return rc;
+out_locked:
+	spin_unlock_irqrestore(&ep->lock, flags);
+	goto out;
 }
 
 /**
@@ -1242,13 +1269,14 @@ static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 	/* make sure it's actually queued on this endpoint */
 	list_for_each_entry(req, &ep->queue, queue) {
 		if (&req->req == _req) {
-			req_done(ep, req, -ECONNRESET);
 			rc = 0;
 			break;
 		}
 	}
 
 	spin_unlock_irqrestore(&ep->lock, flags);
+	if (!rc)
+		req_done(ep, req, -ECONNRESET, NULL);
 	return rc;
 }
 
@@ -1445,7 +1473,6 @@ static int pxa_ep_disable(struct usb_ep *_ep)
 {
 	struct pxa_ep		*ep;
 	struct udc_usb_ep	*udc_usb_ep;
-	unsigned long		flags;
 
 	if (!_ep)
 		return -EINVAL;
@@ -1455,10 +1482,8 @@ static int pxa_ep_disable(struct usb_ep *_ep)
 	if (!ep || is_ep0(ep) || !list_empty(&ep->queue))
 		return -EINVAL;
 
-	spin_lock_irqsave(&ep->lock, flags);
 	ep->enabled = 0;
 	nuke(ep, -ESHUTDOWN);
-	spin_unlock_irqrestore(&ep->lock, flags);
 
 	pxa_ep_fifo_flush(_ep);
 	udc_usb_ep->pxa_ep = NULL;
@@ -1907,8 +1932,10 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
 	} u;
 	int i;
 	int have_extrabytes = 0;
+	unsigned long flags;
 
 	nuke(ep, -EPROTO);
+	spin_lock_irqsave(&ep->lock, flags);
 
 	/*
 	 * In the PXA320 manual, in the section about Back-to-Back setup
@@ -1947,10 +1974,13 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
 	/* Tell UDC to enter Data Stage */
 	ep_write_UDCCSR(ep, UDCCSR0_SA | UDCCSR0_OPC);
 
+	spin_unlock_irqrestore(&ep->lock, flags);
 	i = udc->driver->setup(&udc->gadget, &u.r);
+	spin_lock_irqsave(&ep->lock, flags);
 	if (i < 0)
 		goto stall;
 out:
+	spin_unlock_irqrestore(&ep->lock, flags);
 	return;
 stall:
 	ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n",
@@ -2055,13 +2085,13 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
 		if (req && !ep_is_full(ep))
 			completed = write_ep0_fifo(ep, req);
 		if (completed)
-			ep0_end_in_req(ep, req);
+			ep0_end_in_req(ep, req, NULL);
 		break;
 	case OUT_DATA_STAGE:			/* SET_DESCRIPTOR */
 		if (epout_has_pkt(ep) && req)
 			completed = read_ep0_fifo(ep, req);
 		if (completed)
-			ep0_end_out_req(ep, req);
+			ep0_end_out_req(ep, req, NULL);
 		break;
 	case STALL:
 		ep_write_UDCCSR(ep, UDCCSR0_FST);
@@ -2091,7 +2121,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
  * Tries to transfer all pending request data into the endpoint and/or
  * transfer all pending data in the endpoint into usb requests.
  *
- * Is always called when in_interrupt() or with ep->lock held.
+ * Is always called when in_interrupt() and with ep->lock released.
  */
 static void handle_ep(struct pxa_ep *ep)
 {
@@ -2100,10 +2130,17 @@ static void handle_ep(struct pxa_ep *ep)
 	u32 udccsr;
 	int is_in = ep->dir_in;
 	int loop = 0;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	if (ep->in_handle_ep)
+		goto recursion_detected;
+	ep->in_handle_ep = 1;
 
 	do {
 		completed = 0;
 		udccsr = udc_ep_readl(ep, UDCCSR);
+
 		if (likely(!list_empty(&ep->queue)))
 			req = list_entry(ep->queue.next,
 					struct pxa27x_request, queue);
@@ -2122,15 +2159,22 @@ static void handle_ep(struct pxa_ep *ep)
 		if (unlikely(is_in)) {
 			if (likely(!ep_is_full(ep)))
 				completed = write_fifo(ep, req);
-			if (completed)
-				ep_end_in_req(ep, req);
 		} else {
 			if (likely(epout_has_pkt(ep)))
 				completed = read_fifo(ep, req);
-			if (completed)
-				ep_end_out_req(ep, req);
+		}
+
+		if (completed) {
+			if (is_in)
+				ep_end_in_req(ep, req, &flags);
+			else
+				ep_end_out_req(ep, req, &flags);
 		}
 	} while (completed);
+
+	ep->in_handle_ep = 0;
+recursion_detected:
+	spin_unlock_irqrestore(&ep->lock, flags);
 }
 
 /**
@@ -2218,9 +2262,13 @@ static void irq_handle_data(int irq, struct pxa_udc *udc)
 			continue;
 
 		udc_writel(udc, UDCISR0, UDCISR_INT(i, UDCISR_INT_MASK));
-		ep = &udc->pxa_ep[i];
-		ep->stats.irqs++;
-		handle_ep(ep);
+
+		WARN_ON(i >= ARRAY_SIZE(udc->pxa_ep));
+		if (i < ARRAY_SIZE(udc->pxa_ep)) {
+			ep = &udc->pxa_ep[i];
+			ep->stats.irqs++;
+			handle_ep(ep);
+		}
 	}
 
 	for (i = 16; udcisr1 != 0 && i < 24; udcisr1 >>= 2, i++) {
@@ -2228,9 +2276,12 @@ static void irq_handle_data(int irq, struct pxa_udc *udc)
 		if (!(udcisr1 & UDCISR_INT_MASK))
 			continue;
 
-		ep = &udc->pxa_ep[i];
-		ep->stats.irqs++;
-		handle_ep(ep);
+		WARN_ON(i >= ARRAY_SIZE(udc->pxa_ep));
+		if (i < ARRAY_SIZE(udc->pxa_ep)) {
+			ep = &udc->pxa_ep[i];
+			ep->stats.irqs++;
+			handle_ep(ep);
+		}
 	}
 
 }
@@ -2439,7 +2490,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 	}
 
 	retval = -ENOMEM;
-	udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	udc->regs = ioremap(regs->start, resource_size(regs));
 	if (!udc->regs) {
 		dev_err(&pdev->dev, "Unable to map UDC I/O memory\n");
 		goto err_map;
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index e25225e26586..ff61e4866e8a 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -318,6 +318,11 @@ struct udc_usb_ep {
  * @queue: requests queue
  * @lock: lock to pxa_ep data (queues and stats)
  * @enabled: true when endpoint enabled (not stopped by gadget layer)
+ * @in_handle_ep: number of recursions of handle_ep() function
+ * 	Prevents deadlocks or infinite recursions of types :
+ *	  irq->handle_ep()->req_done()->req.complete()->pxa_ep_queue()->handle_ep()
+ *      or
+ *        pxa_ep_queue()->handle_ep()->req_done()->req.complete()->pxa_ep_queue()
  * @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX)
  * @name: endpoint name (for trace/debug purpose)
  * @dir_in: 1 if IN endpoint, 0 if OUT endpoint
@@ -346,6 +351,7 @@ struct pxa_ep {
 	spinlock_t		lock;		/* Protects this structure */
 						/* (queues, stats) */
 	unsigned		enabled:1;
+	unsigned		in_handle_ep:1;
 
 	unsigned		idx:5;
 	char			*name;
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 5fc80a104150..7e5bf593d386 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -317,7 +317,8 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
  *
  * Allocate a new USB request structure appropriate for the specified endpoint
  */
-struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, gfp_t flags)
+static struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep,
+						      gfp_t flags)
 {
 	struct s3c_hsotg_req *req;
 
@@ -373,7 +374,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
 		req->dma = DMA_ADDR_INVALID;
 		hs_req->mapped = 0;
 	} else {
-		dma_sync_single(hsotg->dev, req->dma, req->length, dir);
+		dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir);
 	}
 }
 
@@ -755,7 +756,7 @@ static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg,
 		hs_req->mapped = 1;
 		req->dma = dma;
 	} else {
-		dma_sync_single(hsotg->dev, req->dma, req->length, dir);
+		dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir);
 		hs_req->mapped = 0;
 	}
 
@@ -1460,7 +1461,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
  * as the actual data should be sent to the memory directly and we turn
  * on the completion interrupts to get notifications of transfer completion.
  */
-void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
 {
 	u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP);
 	u32 epnum, status, size;
@@ -3094,7 +3095,7 @@ static void s3c_hsotg_gate(struct platform_device *pdev, bool on)
 	local_irq_restore(flags);
 }
 
-struct s3c_hsotg_plat s3c_hsotg_default_pdata;
+static struct s3c_hsotg_plat s3c_hsotg_default_pdata;
 
 static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 {
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 2fc02bd95848..84ca195c2d10 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -746,6 +746,10 @@ static const struct net_device_ops eth_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
+static struct device_type gadget_type = {
+	.name	= "gadget",
+};
+
 /**
  * gether_setup - initialize one ethernet-over-usb link
  * @g: gadget to associated with these links
@@ -808,6 +812,7 @@ int __init gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
 
 	dev->gadget = g;
 	SET_NETDEV_DEV(net, &g->dev);
+	SET_NETDEV_DEVTYPE(net, &gadget_type);
 
 	status = register_netdev(net);
 	if (status < 0) {
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
index fd55f450bc0e..3c8c0c9f9d72 100644
--- a/drivers/usb/gadget/u_ether.h
+++ b/drivers/usb/gadget/u_ether.h
@@ -93,13 +93,6 @@ static inline bool can_support_ecm(struct usb_gadget *gadget)
 	if (!gadget_supports_altsettings(gadget))
 		return false;
 
-	/* SA1100 can do ECM, *without* status endpoint ... but we'll
-	 * only use it in non-ECM mode for backwards compatibility
-	 * (and since we currently require a status endpoint)
-	 */
-	if (gadget_is_sa1100(gadget))
-		return false;
-
 	/* Everything else is *presumably* fine ... but this is a bit
 	 * chancy, so be **CERTAIN** there are no hardware issues with
 	 * your controller.  Add it above if it can't handle CDC.
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 2d772401b7ad..fac81ee193dd 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -297,12 +297,10 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 	 */
 	if (loopdefault) {
 		loopback_add(cdev, autoresume != 0);
-		if (!gadget_is_sh(gadget))
-			sourcesink_add(cdev, autoresume != 0);
+		sourcesink_add(cdev, autoresume != 0);
 	} else {
 		sourcesink_add(cdev, autoresume != 0);
-		if (!gadget_is_sh(gadget))
-			loopback_add(cdev, autoresume != 0);
+		loopback_add(cdev, autoresume != 0);
 	}
 
 	gcnum = usb_gadget_controller_number(gadget);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2678a1624fcc..8d3df0397de3 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -399,3 +399,14 @@ config USB_HWA_HCD
 
 	  To compile this driver a module, choose M here: the module
 	  will be called "hwa-hc".
+
+config USB_IMX21_HCD
+       tristate "iMX21 HCD support"
+       depends on USB && ARM && MACH_MX21
+       help
+         This driver enables support for the on-chip USB host in the
+         iMX21 processor.
+
+         To compile this driver as a module, choose M here: the
+         module will be called "imx21-hcd".
+
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index f58b2494c44a..4e0c67f1f51b 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -32,3 +32,5 @@ obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
 obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
 obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
 obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
+obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
+
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 87c1b7c34c0e..51bd0edf544f 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -149,7 +149,7 @@ static int __init ehci_atmel_drv_probe(struct platform_device *pdev)
 		goto fail_request_resource;
 	}
 	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = res->end - res->start + 1;
+	hcd->rsrc_len = resource_size(res);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
 				driver->description)) {
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index dbfb482a94e3..e3a74e75e822 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -121,6 +121,7 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
 	struct ehci_hcd *ehci;
+	struct resource *res;
 	int ret;
 
 	if (usb_disabled())
@@ -144,8 +145,9 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 	if (!hcd)
 		return -ENOMEM;
 
-	hcd->rsrc_start = pdev->resource[0].start;
-	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		pr_debug("request_mem_region failed");
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 991174937db3..0e26aa13f158 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -1,5 +1,6 @@
 /*
- * Copyright (c) 2005 MontaVista Software
+ * Copyright 2005-2009 MontaVista Software, Inc.
+ * Copyright 2008      Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -17,17 +18,20 @@
  *
  * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
  * by Hunter Wu.
+ * Power Management support by Dave Liu <daveliu@freescale.com>,
+ * Jerry Huang <Chang-Ming.Huang@freescale.com> and
+ * Anton Vorontsov <avorontsov@ru.mvista.com>.
  */
 
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/fsl_devices.h>
 
 #include "ehci-fsl.h"
 
-/* FIXME: Power Management is un-ported so temporarily disable it */
-#undef CONFIG_PM
-
-
 /* configure so an HC device and id are always provided */
 /* always called with process context; sleeping is OK */
 
@@ -40,8 +44,8 @@
  * Allocates basic resources for this USB host controller.
  *
  */
-int usb_hcd_fsl_probe(const struct hc_driver *driver,
-		      struct platform_device *pdev)
+static int usb_hcd_fsl_probe(const struct hc_driver *driver,
+			     struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata;
 	struct usb_hcd *hcd;
@@ -147,7 +151,8 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
  * Reverses the effect of usb_hcd_fsl_probe().
  *
  */
-void usb_hcd_fsl_remove(struct usb_hcd *hcd, struct platform_device *pdev)
+static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
+			       struct platform_device *pdev)
 {
 	usb_remove_hcd(hcd);
 	iounmap(hcd->regs);
@@ -284,10 +289,81 @@ static int ehci_fsl_setup(struct usb_hcd *hcd)
 	return retval;
 }
 
+struct ehci_fsl {
+	struct ehci_hcd	ehci;
+
+#ifdef CONFIG_PM
+	/* Saved USB PHY settings, need to restore after deep sleep. */
+	u32 usb_ctrl;
+#endif
+};
+
+#ifdef CONFIG_PM
+
+static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	return container_of(ehci, struct ehci_fsl, ehci);
+}
+
+static int ehci_fsl_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+	void __iomem *non_ehci = hcd->regs;
+
+	if (!fsl_deep_sleep())
+		return 0;
+
+	ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL);
+	return 0;
+}
+
+static int ehci_fsl_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	void __iomem *non_ehci = hcd->regs;
+
+	if (!fsl_deep_sleep())
+		return 0;
+
+	usb_root_hub_lost_power(hcd->self.root_hub);
+
+	/* Restore USB PHY settings and enable the controller. */
+	out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl);
+
+	ehci_reset(ehci);
+	ehci_fsl_reinit(ehci);
+
+	return 0;
+}
+
+static int ehci_fsl_drv_restore(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	usb_root_hub_lost_power(hcd->self.root_hub);
+	return 0;
+}
+
+static struct dev_pm_ops ehci_fsl_pm_ops = {
+	.suspend = ehci_fsl_drv_suspend,
+	.resume = ehci_fsl_drv_resume,
+	.restore = ehci_fsl_drv_restore,
+};
+
+#define EHCI_FSL_PM_OPS		(&ehci_fsl_pm_ops)
+#else
+#define EHCI_FSL_PM_OPS		NULL
+#endif /* CONFIG_PM */
+
 static const struct hc_driver ehci_fsl_hc_driver = {
 	.description = hcd_name,
 	.product_desc = "Freescale On-Chip EHCI Host Controller",
-	.hcd_priv_size = sizeof(struct ehci_hcd),
+	.hcd_priv_size = sizeof(struct ehci_fsl),
 
 	/*
 	 * generic hardware linkage
@@ -354,6 +430,7 @@ static struct platform_driver ehci_fsl_driver = {
 	.remove = ehci_fsl_drv_remove,
 	.shutdown = usb_hcd_platform_shutdown,
 	.driver = {
-		   .name = "fsl-ehci",
+		.name = "fsl-ehci",
+		.pm = EHCI_FSL_PM_OPS,
 	},
 };
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 35c56f40bdbb..23cd917088b4 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -162,6 +162,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		goto err_ioremap;
 	}
 
+	/* call platform specific init function */
+	if (pdata->init) {
+		ret = pdata->init(pdev);
+		if (ret) {
+			dev_err(dev, "platform init failed\n");
+			goto err_init;
+		}
+		/* platforms need some time to settle changed IO settings */
+		mdelay(10);
+	}
+
 	/* enable clocks */
 	priv->usbclk = clk_get(dev, "usb");
 	if (IS_ERR(priv->usbclk)) {
@@ -192,18 +203,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_init;
 
-	/* call platform specific init function */
-	if (pdata->init) {
-		ret = pdata->init(pdev);
-		if (ret) {
-			dev_err(dev, "platform init failed\n");
-			goto err_init;
-		}
-	}
-
-	/* most platforms need some time to settle changed IO settings */
-	mdelay(10);
-
 	/* Initialize the transceiver */
 	if (pdata->otg) {
 		pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 74d07f4e8b7d..f0282d6bb7aa 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -26,10 +26,9 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
- * TODO (last updated Feb 23rd, 2009):
+ * TODO (last updated Feb 12, 2010):
  *	- add kernel-doc
  *	- enable AUTOIDLE
- *	- move DPLL5 programming to clock fw
  *	- add suspend/resume
  *	- move workarounds to board-files
  */
@@ -37,6 +36,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
 #include <plat/usb.h>
 
 /*
@@ -178,6 +178,11 @@ struct ehci_hcd_omap {
 	void __iomem		*uhh_base;
 	void __iomem		*tll_base;
 	void __iomem		*ehci_base;
+
+	/* Regulators for USB PHYs.
+	 * Each PHY can have a seperate regulator.
+	 */
+	struct regulator        *regulator[OMAP3_HS_USB_PORTS];
 };
 
 /*-------------------------------------------------------------------------*/
@@ -546,6 +551,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
 	int irq = platform_get_irq(pdev, 0);
 	int ret = -ENODEV;
+	int i;
+	char supply[7];
 
 	if (!pdata) {
 		dev_dbg(&pdev->dev, "missing platform_data\n");
@@ -613,6 +620,21 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 		goto err_tll_ioremap;
 	}
 
+	/* get ehci regulator and enable */
+	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
+		if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) {
+			omap->regulator[i] = NULL;
+			continue;
+		}
+		snprintf(supply, sizeof(supply), "hsusb%d", i);
+		omap->regulator[i] = regulator_get(omap->dev, supply);
+		if (IS_ERR(omap->regulator[i]))
+			dev_dbg(&pdev->dev,
+			"failed to get ehci port%d regulator\n", i);
+		else
+			regulator_enable(omap->regulator[i]);
+	}
+
 	ret = omap_start_ehc(omap, hcd);
 	if (ret) {
 		dev_dbg(&pdev->dev, "failed to start ehci\n");
@@ -622,13 +644,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	omap->ehci->regs = hcd->regs
 		+ HC_LENGTH(readl(&omap->ehci->caps->hc_capbase));
 
+	dbg_hcs_params(omap->ehci, "reset");
+	dbg_hcc_params(omap->ehci, "reset");
+
 	/* cache this readonly data; minimize chip reads */
 	omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params);
 
-	/* SET 1 micro-frame Interrupt interval */
-	writel(readl(&omap->ehci->regs->command) | (1 << 16),
-			&omap->ehci->regs->command);
-
 	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 	if (ret) {
 		dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
@@ -641,6 +662,12 @@ err_add_hcd:
 	omap_stop_ehc(omap, hcd);
 
 err_start:
+	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
+		if (omap->regulator[i]) {
+			regulator_disable(omap->regulator[i]);
+			regulator_put(omap->regulator[i]);
+		}
+	}
 	iounmap(omap->tll_base);
 
 err_tll_ioremap:
@@ -674,13 +701,21 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
 {
 	struct ehci_hcd_omap *omap = platform_get_drvdata(pdev);
 	struct usb_hcd *hcd = ehci_to_hcd(omap->ehci);
+	int i;
 
 	usb_remove_hcd(hcd);
 	omap_stop_ehc(omap, hcd);
 	iounmap(hcd->regs);
+	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
+		if (omap->regulator[i]) {
+			regulator_disable(omap->regulator[i]);
+			regulator_put(omap->regulator[i]);
+		}
+	}
 	iounmap(omap->tll_base);
 	iounmap(omap->uhh_base);
 	usb_put_hcd(hcd);
+	kfree(omap);
 
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 1d283e1b2b8d..0f87dc72820a 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -222,14 +222,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
-	if (!request_mem_region(res->start, res->end - res->start + 1,
+	if (!request_mem_region(res->start, resource_size(res),
 				ehci_orion_hc_driver.description)) {
 		dev_dbg(&pdev->dev, "controller already in use\n");
 		err = -EBUSY;
 		goto err1;
 	}
 
-	regs = ioremap(res->start, res->end - res->start + 1);
+	regs = ioremap(res->start, resource_size(res));
 	if (regs == NULL) {
 		dev_dbg(&pdev->dev, "error mapping memory\n");
 		err = -EFAULT;
@@ -244,7 +244,7 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
 	}
 
 	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = res->end - res->start + 1;
+	hcd->rsrc_len = resource_size(res);
 	hcd->regs = regs;
 
 	ehci = hcd_to_ehci(hcd);
@@ -287,7 +287,7 @@ err4:
 err3:
 	iounmap(regs);
 err2:
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 err1:
 	dev_err(&pdev->dev, "init %s fail, %d\n",
 		dev_name(&pdev->dev), err);
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index 36f96da129f5..8df33b8a634c 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -134,21 +134,21 @@ ehci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
 	hcd->rsrc_len = res.end - res.start + 1;
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-		printk(KERN_ERR __FILE__ ": request_mem_region failed\n");
+		printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__);
 		rv = -EBUSY;
 		goto err_rmr;
 	}
 
 	irq = irq_of_parse_and_map(dn, 0);
 	if (irq == NO_IRQ) {
-		printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n");
+		printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
 		rv = -EBUSY;
 		goto err_irq;
 	}
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (!hcd->regs) {
-		printk(KERN_ERR __FILE__ ": ioremap failed\n");
+		printk(KERN_ERR "%s: ioremap failed\n", __FILE__);
 		rv = -ENOMEM;
 		goto err_ioremap;
 	}
@@ -161,9 +161,9 @@ ehci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
 			ehci->ohci_hcctrl_reg = ioremap(res.start +
 					OHCI_HCCTRL_OFFSET, OHCI_HCCTRL_LEN);
 		else
-			pr_debug(__FILE__ ": no ohci offset in fdt\n");
+			pr_debug("%s: no ohci offset in fdt\n", __FILE__);
 		if (!ehci->ohci_hcctrl_reg) {
-			pr_debug(__FILE__ ": ioremap for ohci hcctrl failed\n");
+			pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__);
 		} else {
 			ehci->has_amcc_usb23 = 1;
 		}
@@ -241,7 +241,7 @@ static int ehci_hcd_ppc_of_remove(struct of_device *op)
 				else
 					release_mem_region(res.start, 0x4);
 			else
-				pr_debug(__FILE__ ": no ohci offset in fdt\n");
+				pr_debug("%s: no ohci offset in fdt\n", __FILE__);
 			of_node_put(np);
 		}
 
@@ -264,7 +264,7 @@ static int ehci_hcd_ppc_of_shutdown(struct of_device *op)
 }
 
 
-static struct of_device_id ehci_hcd_ppc_of_match[] = {
+static const struct of_device_id ehci_hcd_ppc_of_match[] = {
 	{
 		.compatible = "usb-ehci",
 	},
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 1e391e624c8a..39340ae00ac4 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -510,6 +510,8 @@ static int disable_periodic (struct ehci_hcd *ehci)
 	ehci_writel(ehci, cmd, &ehci->regs->command);
 	/* posted write ... */
 
+	free_cached_itd_list(ehci);
+
 	ehci->next_uframe = -1;
 	return 0;
 }
@@ -2322,9 +2324,13 @@ restart:
 				 * No need to check for activity unless the
 				 * frame is current.
 				 */
-				if (frame == clock_frame && live &&
-						(q.sitd->hw_results &
-							SITD_ACTIVE(ehci))) {
+				if (((frame == clock_frame) ||
+				     (((frame + 1) % ehci->periodic_size)
+				      == clock_frame))
+				    && live
+				    && (q.sitd->hw_results &
+					SITD_ACTIVE(ehci))) {
+
 					incomplete = true;
 					q_p = &q.sitd->sitd_next;
 					hw_p = &q.sitd->hw_next;
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index a5861531ad3e..f603bb2c0a8e 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -177,21 +177,21 @@ ehci_hcd_xilinx_of_probe(struct of_device *op, const struct of_device_id *match)
 	hcd->rsrc_len = res.end - res.start + 1;
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-		printk(KERN_ERR __FILE__ ": request_mem_region failed\n");
+		printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__);
 		rv = -EBUSY;
 		goto err_rmr;
 	}
 
 	irq = irq_of_parse_and_map(dn, 0);
 	if (irq == NO_IRQ) {
-		printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n");
+		printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
 		rv = -EBUSY;
 		goto err_irq;
 	}
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (!hcd->regs) {
-		printk(KERN_ERR __FILE__ ": ioremap failed\n");
+		printk(KERN_ERR "%s: ioremap failed\n", __FILE__);
 		rv = -ENOMEM;
 		goto err_ioremap;
 	}
@@ -281,7 +281,7 @@ static int ehci_hcd_xilinx_of_shutdown(struct of_device *op)
 }
 
 
-static struct of_device_id ehci_hcd_xilinx_of_match[] = {
+static const struct of_device_id ehci_hcd_xilinx_of_match[] = {
 		{.compatible = "xlnx,xps-usb-host-1.00.a",},
 	{},
 };
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 78e7c3cfcb72..5dcfb3de9945 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -433,7 +433,7 @@ static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		return -ENOMEM;
 
 	/* allocate the private part of the URB */
-	urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags);
+	urb_priv->tds = kcalloc(size, sizeof(*urb_priv->tds), mem_flags);
 	if (!urb_priv->tds) {
 		kfree(urb_priv);
 		return -ENOMEM;
@@ -805,7 +805,7 @@ static int __devexit of_fhci_remove(struct of_device *ofdev)
 	return fhci_remove(&ofdev->dev);
 }
 
-static struct of_device_id of_fhci_match[] = {
+static const struct of_device_id of_fhci_match[] = {
 	{ .compatible = "fsl,mpc8323-qe-usb", },
 	{},
 };
diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c
new file mode 100644
index 000000000000..512f647448ca
--- /dev/null
+++ b/drivers/usb/host/imx21-dbg.c
@@ -0,0 +1,527 @@
+/*
+ * Copyright (c) 2009 by Martin Fuzzey
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* this file is part of imx21-hcd.c */
+
+#ifndef DEBUG
+
+static inline void create_debug_files(struct imx21 *imx21) { }
+static inline void remove_debug_files(struct imx21 *imx21) { }
+static inline void debug_urb_submitted(struct imx21 *imx21, struct urb *urb) {}
+static inline void debug_urb_completed(struct imx21 *imx21, struct urb *urb,
+	int status) {}
+static inline void debug_urb_unlinked(struct imx21 *imx21, struct urb *urb) {}
+static inline void debug_urb_queued_for_etd(struct imx21 *imx21,
+	struct urb *urb) {}
+static inline void debug_urb_queued_for_dmem(struct imx21 *imx21,
+	struct urb *urb) {}
+static inline void debug_etd_allocated(struct imx21 *imx21) {}
+static inline void debug_etd_freed(struct imx21 *imx21) {}
+static inline void debug_dmem_allocated(struct imx21 *imx21, int size) {}
+static inline void debug_dmem_freed(struct imx21 *imx21, int size) {}
+static inline void debug_isoc_submitted(struct imx21 *imx21,
+	int frame, struct td *td) {}
+static inline void debug_isoc_completed(struct imx21 *imx21,
+	int frame, struct td *td, int cc, int len) {}
+
+#else
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static const char *dir_labels[] = {
+	"TD 0",
+	"OUT",
+	"IN",
+	"TD 1"
+};
+
+static const char *speed_labels[] = {
+	"Full",
+	"Low"
+};
+
+static const char *format_labels[] = {
+	"Control",
+	"ISO",
+	"Bulk",
+	"Interrupt"
+};
+
+static inline struct debug_stats *stats_for_urb(struct imx21 *imx21,
+	struct urb *urb)
+{
+	return usb_pipeisoc(urb->pipe) ?
+		&imx21->isoc_stats : &imx21->nonisoc_stats;
+}
+
+static void debug_urb_submitted(struct imx21 *imx21, struct urb *urb)
+{
+	stats_for_urb(imx21, urb)->submitted++;
+}
+
+static void debug_urb_completed(struct imx21 *imx21, struct urb *urb, int st)
+{
+	if (st)
+		stats_for_urb(imx21, urb)->completed_failed++;
+	else
+		stats_for_urb(imx21, urb)->completed_ok++;
+}
+
+static void debug_urb_unlinked(struct imx21 *imx21, struct urb *urb)
+{
+	stats_for_urb(imx21, urb)->unlinked++;
+}
+
+static void debug_urb_queued_for_etd(struct imx21 *imx21, struct urb *urb)
+{
+	stats_for_urb(imx21, urb)->queue_etd++;
+}
+
+static void debug_urb_queued_for_dmem(struct imx21 *imx21, struct urb *urb)
+{
+	stats_for_urb(imx21, urb)->queue_dmem++;
+}
+
+static inline void debug_etd_allocated(struct imx21 *imx21)
+{
+	imx21->etd_usage.maximum = max(
+			++(imx21->etd_usage.value),
+			imx21->etd_usage.maximum);
+}
+
+static inline void debug_etd_freed(struct imx21 *imx21)
+{
+	imx21->etd_usage.value--;
+}
+
+static inline void debug_dmem_allocated(struct imx21 *imx21, int size)
+{
+	imx21->dmem_usage.value += size;
+	imx21->dmem_usage.maximum = max(
+			imx21->dmem_usage.value,
+			imx21->dmem_usage.maximum);
+}
+
+static inline void debug_dmem_freed(struct imx21 *imx21, int size)
+{
+	imx21->dmem_usage.value -= size;
+}
+
+
+static void debug_isoc_submitted(struct imx21 *imx21,
+	int frame, struct td *td)
+{
+	struct debug_isoc_trace *trace = &imx21->isoc_trace[
+		imx21->isoc_trace_index++];
+
+	imx21->isoc_trace_index %= ARRAY_SIZE(imx21->isoc_trace);
+	trace->schedule_frame = td->frame;
+	trace->submit_frame = frame;
+	trace->request_len = td->len;
+	trace->td = td;
+}
+
+static inline void debug_isoc_completed(struct imx21 *imx21,
+	int frame, struct td *td, int cc, int len)
+{
+	struct debug_isoc_trace *trace, *trace_failed;
+	int i;
+	int found = 0;
+
+	trace = imx21->isoc_trace;
+	for (i = 0; i < ARRAY_SIZE(imx21->isoc_trace); i++, trace++) {
+		if (trace->td == td) {
+			trace->done_frame = frame;
+			trace->done_len = len;
+			trace->cc = cc;
+			trace->td = NULL;
+			found = 1;
+			break;
+		}
+	}
+
+	if (found && cc) {
+		trace_failed = &imx21->isoc_trace_failed[
+					imx21->isoc_trace_index_failed++];
+
+		imx21->isoc_trace_index_failed %= ARRAY_SIZE(
+						imx21->isoc_trace_failed);
+		*trace_failed = *trace;
+	}
+}
+
+
+static char *format_ep(struct usb_host_endpoint *ep, char *buf, int bufsize)
+{
+	if (ep)
+		snprintf(buf, bufsize, "ep_%02x (type:%02X kaddr:%p)",
+			ep->desc.bEndpointAddress,
+			usb_endpoint_type(&ep->desc),
+			ep);
+	else
+		snprintf(buf, bufsize, "none");
+	return buf;
+}
+
+static char *format_etd_dword0(u32 value, char *buf, int bufsize)
+{
+	snprintf(buf, bufsize,
+		"addr=%d ep=%d dir=%s speed=%s format=%s halted=%d",
+		value & 0x7F,
+		(value >> DW0_ENDPNT) & 0x0F,
+		dir_labels[(value >> DW0_DIRECT) & 0x03],
+		speed_labels[(value >> DW0_SPEED) & 0x01],
+		format_labels[(value >> DW0_FORMAT) & 0x03],
+		(value >> DW0_HALTED) & 0x01);
+	return buf;
+}
+
+static int debug_status_show(struct seq_file *s, void *v)
+{
+	struct imx21 *imx21 = s->private;
+	int etds_allocated = 0;
+	int etds_sw_busy = 0;
+	int etds_hw_busy = 0;
+	int dmem_blocks = 0;
+	int queued_for_etd = 0;
+	int queued_for_dmem = 0;
+	unsigned int dmem_bytes = 0;
+	int i;
+	struct etd_priv *etd;
+	u32 etd_enable_mask;
+	unsigned long flags;
+	struct imx21_dmem_area *dmem;
+	struct ep_priv *ep_priv;
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	etd_enable_mask = readl(imx21->regs + USBH_ETDENSET);
+	for (i = 0, etd = imx21->etd; i < USB_NUM_ETD; i++, etd++) {
+		if (etd->alloc)
+			etds_allocated++;
+		if (etd->urb)
+			etds_sw_busy++;
+		if (etd_enable_mask & (1<<i))
+			etds_hw_busy++;
+	}
+
+	list_for_each_entry(dmem, &imx21->dmem_list, list) {
+		dmem_bytes += dmem->size;
+		dmem_blocks++;
+	}
+
+	list_for_each_entry(ep_priv, &imx21->queue_for_etd, queue)
+		queued_for_etd++;
+
+	list_for_each_entry(etd, &imx21->queue_for_dmem, queue)
+		queued_for_dmem++;
+
+	spin_unlock_irqrestore(&imx21->lock, flags);
+
+	seq_printf(s,
+		"Frame: %d\n"
+		"ETDs allocated: %d/%d (max=%d)\n"
+		"ETDs in use sw: %d\n"
+		"ETDs in use hw: %d\n"
+		"DMEM alocated: %d/%d (max=%d)\n"
+		"DMEM blocks: %d\n"
+		"Queued waiting for ETD: %d\n"
+		"Queued waiting for DMEM: %d\n",
+		readl(imx21->regs + USBH_FRMNUB) & 0xFFFF,
+		etds_allocated, USB_NUM_ETD, imx21->etd_usage.maximum,
+		etds_sw_busy,
+		etds_hw_busy,
+		dmem_bytes, DMEM_SIZE, imx21->dmem_usage.maximum,
+		dmem_blocks,
+		queued_for_etd,
+		queued_for_dmem);
+
+	return 0;
+}
+
+static int debug_dmem_show(struct seq_file *s, void *v)
+{
+	struct imx21 *imx21 = s->private;
+	struct imx21_dmem_area *dmem;
+	unsigned long flags;
+	char ep_text[40];
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	list_for_each_entry(dmem, &imx21->dmem_list, list)
+		seq_printf(s,
+			"%04X: size=0x%X "
+			"ep=%s\n",
+			dmem->offset, dmem->size,
+			format_ep(dmem->ep, ep_text, sizeof(ep_text)));
+
+	spin_unlock_irqrestore(&imx21->lock, flags);
+
+	return 0;
+}
+
+static int debug_etd_show(struct seq_file *s, void *v)
+{
+	struct imx21 *imx21 = s->private;
+	struct etd_priv *etd;
+	char buf[60];
+	u32 dword;
+	int i, j;
+	unsigned long flags;
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	for (i = 0, etd = imx21->etd; i < USB_NUM_ETD; i++, etd++) {
+		int state = -1;
+		struct urb_priv *urb_priv;
+		if (etd->urb) {
+			urb_priv = etd->urb->hcpriv;
+			if (urb_priv)
+				state = urb_priv->state;
+		}
+
+		seq_printf(s,
+			"etd_num: %d\n"
+			"ep: %s\n"
+			"alloc: %d\n"
+			"len: %d\n"
+			"busy sw: %d\n"
+			"busy hw: %d\n"
+			"urb state: %d\n"
+			"current urb: %p\n",
+
+			i,
+			format_ep(etd->ep, buf, sizeof(buf)),
+			etd->alloc,
+			etd->len,
+			etd->urb != NULL,
+			(readl(imx21->regs + USBH_ETDENSET) & (1 << i)) > 0,
+			state,
+			etd->urb);
+
+		for (j = 0; j < 4; j++) {
+			dword = etd_readl(imx21, i, j);
+			switch (j) {
+			case 0:
+				format_etd_dword0(dword, buf, sizeof(buf));
+				break;
+			case 2:
+				snprintf(buf, sizeof(buf),
+					"cc=0X%02X", dword >> DW2_COMPCODE);
+				break;
+			default:
+				*buf = 0;
+				break;
+			}
+			seq_printf(s,
+				"dword %d: submitted=%08X cur=%08X [%s]\n",
+				j,
+				etd->submitted_dwords[j],
+				dword,
+				buf);
+		}
+		seq_printf(s, "\n");
+	}
+
+	spin_unlock_irqrestore(&imx21->lock, flags);
+
+	return 0;
+}
+
+static void debug_statistics_show_one(struct seq_file *s,
+	const char *name, struct debug_stats *stats)
+{
+	seq_printf(s, "%s:\n"
+		"submitted URBs: %lu\n"
+		"completed OK: %lu\n"
+		"completed failed: %lu\n"
+		"unlinked: %lu\n"
+		"queued for ETD: %lu\n"
+		"queued for DMEM: %lu\n\n",
+		name,
+		stats->submitted,
+		stats->completed_ok,
+		stats->completed_failed,
+		stats->unlinked,
+		stats->queue_etd,
+		stats->queue_dmem);
+}
+
+static int debug_statistics_show(struct seq_file *s, void *v)
+{
+	struct imx21 *imx21 = s->private;
+	unsigned long flags;
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	debug_statistics_show_one(s, "nonisoc", &imx21->nonisoc_stats);
+	debug_statistics_show_one(s, "isoc", &imx21->isoc_stats);
+	seq_printf(s, "unblock kludge triggers: %lu\n", imx21->debug_unblocks);
+	spin_unlock_irqrestore(&imx21->lock, flags);
+
+	return 0;
+}
+
+static void debug_isoc_show_one(struct seq_file *s,
+	const char *name, int index, 	struct debug_isoc_trace *trace)
+{
+	seq_printf(s, "%s %d:\n"
+		"cc=0X%02X\n"
+		"scheduled frame %d (%d)\n"
+		"submittted frame %d (%d)\n"
+		"completed frame %d (%d)\n"
+		"requested length=%d\n"
+		"completed length=%d\n\n",
+		name, index,
+		trace->cc,
+		trace->schedule_frame, trace->schedule_frame & 0xFFFF,
+		trace->submit_frame, trace->submit_frame & 0xFFFF,
+		trace->done_frame, trace->done_frame & 0xFFFF,
+		trace->request_len,
+		trace->done_len);
+}
+
+static int debug_isoc_show(struct seq_file *s, void *v)
+{
+	struct imx21 *imx21 = s->private;
+	struct debug_isoc_trace *trace;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	trace = imx21->isoc_trace_failed;
+	for (i = 0; i < ARRAY_SIZE(imx21->isoc_trace_failed); i++, trace++)
+		debug_isoc_show_one(s, "isoc failed", i, trace);
+
+	trace = imx21->isoc_trace;
+	for (i = 0; i < ARRAY_SIZE(imx21->isoc_trace); i++, trace++)
+		debug_isoc_show_one(s, "isoc", i, trace);
+
+	spin_unlock_irqrestore(&imx21->lock, flags);
+
+	return 0;
+}
+
+static int debug_status_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, debug_status_show, inode->i_private);
+}
+
+static int debug_dmem_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, debug_dmem_show, inode->i_private);
+}
+
+static int debug_etd_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, debug_etd_show, inode->i_private);
+}
+
+static int debug_statistics_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, debug_statistics_show, inode->i_private);
+}
+
+static int debug_isoc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, debug_isoc_show, inode->i_private);
+}
+
+static const struct file_operations debug_status_fops = {
+	.open = debug_status_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct file_operations debug_dmem_fops = {
+	.open = debug_dmem_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct file_operations debug_etd_fops = {
+	.open = debug_etd_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct file_operations debug_statistics_fops = {
+	.open = debug_statistics_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct file_operations debug_isoc_fops = {
+	.open = debug_isoc_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void create_debug_files(struct imx21 *imx21)
+{
+	imx21->debug_root = debugfs_create_dir(dev_name(imx21->dev), NULL);
+	if (!imx21->debug_root)
+		goto failed_create_rootdir;
+
+	if (!debugfs_create_file("status", S_IRUGO,
+			imx21->debug_root, imx21, &debug_status_fops))
+		goto failed_create;
+
+	if (!debugfs_create_file("dmem", S_IRUGO,
+			imx21->debug_root, imx21, &debug_dmem_fops))
+		goto failed_create;
+
+	if (!debugfs_create_file("etd", S_IRUGO,
+			imx21->debug_root, imx21, &debug_etd_fops))
+		goto failed_create;
+
+	if (!debugfs_create_file("statistics", S_IRUGO,
+			imx21->debug_root, imx21, &debug_statistics_fops))
+		goto failed_create;
+
+	if (!debugfs_create_file("isoc", S_IRUGO,
+			imx21->debug_root, imx21, &debug_isoc_fops))
+		goto failed_create;
+
+	return;
+
+failed_create:
+	debugfs_remove_recursive(imx21->debug_root);
+
+failed_create_rootdir:
+	imx21->debug_root = NULL;
+}
+
+
+static void remove_debug_files(struct imx21 *imx21)
+{
+	if (imx21->debug_root) {
+		debugfs_remove_recursive(imx21->debug_root);
+		imx21->debug_root = NULL;
+	}
+}
+
+#endif
+
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
new file mode 100644
index 000000000000..213e270e1c29
--- /dev/null
+++ b/drivers/usb/host/imx21-hcd.c
@@ -0,0 +1,1789 @@
+/*
+ * USB Host Controller Driver for IMX21
+ *
+ * Copyright (C) 2006 Loping Dog Embedded Systems
+ * Copyright (C) 2009 Martin Fuzzey
+ * Originally written by Jay Monkman <jtm@lopingdog.com>
+ * Ported to 2.6.30, debugged and enhanced by Martin Fuzzey
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+ /*
+  * The i.MX21 USB hardware contains
+  *    * 32 transfer descriptors (called ETDs)
+  *    * 4Kb of Data memory
+  *
+  * The data memory is shared between the host and fuction controlers
+  * (but this driver only supports the host controler)
+  *
+  * So setting up a transfer involves:
+  *    * Allocating a ETD
+  *    * Fill in ETD with appropriate information
+  *    * Allocating data memory (and putting the offset in the ETD)
+  *    * Activate the ETD
+  *    * Get interrupt when done.
+  *
+  * An ETD is assigned to each active endpoint.
+  *
+  * Low resource (ETD and Data memory) situations are handled differently for
+  * isochronous and non insosynchronous transactions :
+  *
+  * Non ISOC transfers are queued if either ETDs or Data memory are unavailable
+  *
+  * ISOC transfers use 2 ETDs per endpoint to achieve double buffering.
+  * They allocate both ETDs and Data memory during URB submission
+  * (and fail if unavailable).
+  */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+
+#include "../core/hcd.h"
+#include "imx21-hcd.h"
+
+#ifdef DEBUG
+#define DEBUG_LOG_FRAME(imx21, etd, event) \
+	(etd)->event##_frame = readl((imx21)->regs + USBH_FRMNUB)
+#else
+#define DEBUG_LOG_FRAME(imx21, etd, event) do { } while (0)
+#endif
+
+static const char hcd_name[] = "imx21-hcd";
+
+static inline struct imx21 *hcd_to_imx21(struct usb_hcd *hcd)
+{
+	return (struct imx21 *)hcd->hcd_priv;
+}
+
+
+/* =========================================== */
+/* Hardware access helpers			*/
+/* =========================================== */
+
+static inline void set_register_bits(struct imx21 *imx21, u32 offset, u32 mask)
+{
+	void __iomem *reg = imx21->regs + offset;
+	writel(readl(reg) | mask, reg);
+}
+
+static inline void clear_register_bits(struct imx21 *imx21,
+	u32 offset, u32 mask)
+{
+	void __iomem *reg = imx21->regs + offset;
+	writel(readl(reg) & ~mask, reg);
+}
+
+static inline void clear_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask)
+{
+	void __iomem *reg = imx21->regs + offset;
+
+	if (readl(reg) & mask)
+		writel(mask, reg);
+}
+
+static inline void set_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask)
+{
+	void __iomem *reg = imx21->regs + offset;
+
+	if (!(readl(reg) & mask))
+		writel(mask, reg);
+}
+
+static void etd_writel(struct imx21 *imx21, int etd_num, int dword, u32 value)
+{
+	writel(value, imx21->regs + USB_ETD_DWORD(etd_num, dword));
+}
+
+static u32 etd_readl(struct imx21 *imx21, int etd_num, int dword)
+{
+	return readl(imx21->regs + USB_ETD_DWORD(etd_num, dword));
+}
+
+static inline int wrap_frame(int counter)
+{
+	return counter & 0xFFFF;
+}
+
+static inline int frame_after(int frame, int after)
+{
+	/* handle wrapping like jiffies time_afer */
+	return (s16)((s16)after - (s16)frame) < 0;
+}
+
+static int imx21_hc_get_frame(struct usb_hcd *hcd)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+
+	return wrap_frame(readl(imx21->regs + USBH_FRMNUB));
+}
+
+
+#include "imx21-dbg.c"
+
+/* =========================================== */
+/* ETD management				*/
+/* ===========================================	*/
+
+static int alloc_etd(struct imx21 *imx21)
+{
+	int i;
+	struct etd_priv *etd = imx21->etd;
+
+	for (i = 0; i < USB_NUM_ETD; i++, etd++) {
+		if (etd->alloc == 0) {
+			memset(etd, 0, sizeof(imx21->etd[0]));
+			etd->alloc = 1;
+			debug_etd_allocated(imx21);
+			return i;
+		}
+	}
+	return -1;
+}
+
+static void disactivate_etd(struct imx21 *imx21, int num)
+{
+	int etd_mask = (1 << num);
+	struct etd_priv *etd = &imx21->etd[num];
+
+	writel(etd_mask, imx21->regs + USBH_ETDENCLR);
+	clear_register_bits(imx21, USBH_ETDDONEEN, etd_mask);
+	writel(etd_mask, imx21->regs + USB_ETDDMACHANLCLR);
+	clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask);
+
+	etd->active_count = 0;
+
+	DEBUG_LOG_FRAME(imx21, etd, disactivated);
+}
+
+static void reset_etd(struct imx21 *imx21, int num)
+{
+	struct etd_priv *etd = imx21->etd + num;
+	int i;
+
+	disactivate_etd(imx21, num);
+
+	for (i = 0; i < 4; i++)
+		etd_writel(imx21, num, i, 0);
+	etd->urb = NULL;
+	etd->ep = NULL;
+	etd->td = NULL;;
+}
+
+static void free_etd(struct imx21 *imx21, int num)
+{
+	if (num < 0)
+		return;
+
+	if (num >= USB_NUM_ETD) {
+		dev_err(imx21->dev, "BAD etd=%d!\n", num);
+		return;
+	}
+	if (imx21->etd[num].alloc == 0) {
+		dev_err(imx21->dev, "ETD %d already free!\n", num);
+		return;
+	}
+
+	debug_etd_freed(imx21);
+	reset_etd(imx21, num);
+	memset(&imx21->etd[num], 0, sizeof(imx21->etd[0]));
+}
+
+
+static void setup_etd_dword0(struct imx21 *imx21,
+	int etd_num, struct urb *urb,  u8 dir, u16 maxpacket)
+{
+	etd_writel(imx21, etd_num, 0,
+		((u32) usb_pipedevice(urb->pipe)) <<  DW0_ADDRESS |
+		((u32) usb_pipeendpoint(urb->pipe) << DW0_ENDPNT) |
+		((u32) dir << DW0_DIRECT) |
+		((u32) ((urb->dev->speed == USB_SPEED_LOW) ?
+			1 : 0) << DW0_SPEED) |
+		((u32) fmt_urb_to_etd[usb_pipetype(urb->pipe)] << DW0_FORMAT) |
+		((u32) maxpacket << DW0_MAXPKTSIZ));
+}
+
+static void activate_etd(struct imx21 *imx21,
+	int etd_num, dma_addr_t dma, u8 dir)
+{
+	u32 etd_mask = 1 << etd_num;
+	struct etd_priv *etd = &imx21->etd[etd_num];
+
+	clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask);
+	set_register_bits(imx21, USBH_ETDDONEEN, etd_mask);
+	clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
+	clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask);
+
+	if (dma) {
+		set_register_bits(imx21, USB_ETDDMACHANLCLR, etd_mask);
+		clear_toggle_bit(imx21, USBH_XBUFSTAT, etd_mask);
+		clear_toggle_bit(imx21, USBH_YBUFSTAT, etd_mask);
+		writel(dma, imx21->regs + USB_ETDSMSA(etd_num));
+		set_register_bits(imx21, USB_ETDDMAEN, etd_mask);
+	} else {
+		if (dir != TD_DIR_IN) {
+			/* need to set for ZLP */
+			set_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
+			set_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask);
+		}
+	}
+
+	DEBUG_LOG_FRAME(imx21, etd, activated);
+
+#ifdef DEBUG
+	if (!etd->active_count) {
+		int i;
+		etd->activated_frame = readl(imx21->regs + USBH_FRMNUB);
+		etd->disactivated_frame = -1;
+		etd->last_int_frame = -1;
+		etd->last_req_frame = -1;
+
+		for (i = 0; i < 4; i++)
+			etd->submitted_dwords[i] = etd_readl(imx21, etd_num, i);
+	}
+#endif
+
+	etd->active_count = 1;
+	writel(etd_mask, imx21->regs + USBH_ETDENSET);
+}
+
+/* ===========================================	*/
+/* Data memory management			*/
+/* ===========================================	*/
+
+static int alloc_dmem(struct imx21 *imx21, unsigned int size,
+		      struct usb_host_endpoint *ep)
+{
+	unsigned int offset = 0;
+	struct imx21_dmem_area *area;
+	struct imx21_dmem_area *tmp;
+
+	size += (~size + 1) & 0x3; /* Round to 4 byte multiple */
+
+	if (size > DMEM_SIZE) {
+		dev_err(imx21->dev, "size=%d > DMEM_SIZE(%d)\n",
+			size, DMEM_SIZE);
+		return -EINVAL;
+	}
+
+	list_for_each_entry(tmp, &imx21->dmem_list, list) {
+		if ((size + offset) < offset)
+			goto fail;
+		if ((size + offset) <= tmp->offset)
+			break;
+		offset = tmp->size + tmp->offset;
+		if ((offset + size) > DMEM_SIZE)
+			goto fail;
+	}
+
+	area = kmalloc(sizeof(struct imx21_dmem_area), GFP_ATOMIC);
+	if (area == NULL)
+		return -ENOMEM;
+
+	area->ep = ep;
+	area->offset = offset;
+	area->size = size;
+	list_add_tail(&area->list, &tmp->list);
+	debug_dmem_allocated(imx21, size);
+	return offset;
+
+fail:
+	return -ENOMEM;
+}
+
+/* Memory now available for a queued ETD - activate it */
+static void activate_queued_etd(struct imx21 *imx21,
+	struct etd_priv *etd, u32 dmem_offset)
+{
+	struct urb_priv *urb_priv = etd->urb->hcpriv;
+	int etd_num = etd - &imx21->etd[0];
+	u32 maxpacket = etd_readl(imx21, etd_num, 1) >> DW1_YBUFSRTAD;
+	u8 dir = (etd_readl(imx21, etd_num, 2) >> DW2_DIRPID) & 0x03;
+
+	dev_dbg(imx21->dev, "activating queued ETD %d now DMEM available\n",
+		etd_num);
+	etd_writel(imx21, etd_num, 1,
+	    ((dmem_offset + maxpacket) << DW1_YBUFSRTAD) | dmem_offset);
+
+	urb_priv->active = 1;
+	activate_etd(imx21, etd_num, etd->dma_handle, dir);
+}
+
+static void free_dmem(struct imx21 *imx21, int offset)
+{
+	struct imx21_dmem_area *area;
+	struct etd_priv *etd, *tmp;
+	int found = 0;
+
+	list_for_each_entry(area, &imx21->dmem_list, list) {
+		if (area->offset == offset) {
+			debug_dmem_freed(imx21, area->size);
+			list_del(&area->list);
+			kfree(area);
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found)  {
+		dev_err(imx21->dev,
+			"Trying to free unallocated DMEM %d\n", offset);
+		return;
+	}
+
+	/* Try again to allocate memory for anything we've queued */
+	list_for_each_entry_safe(etd, tmp, &imx21->queue_for_dmem, queue) {
+		offset = alloc_dmem(imx21, etd->dmem_size, etd->ep);
+		if (offset >= 0) {
+			list_del(&etd->queue);
+			activate_queued_etd(imx21, etd, (u32)offset);
+		}
+	}
+}
+
+static void free_epdmem(struct imx21 *imx21, struct usb_host_endpoint *ep)
+{
+	struct imx21_dmem_area *area, *tmp;
+
+	list_for_each_entry_safe(area, tmp, &imx21->dmem_list, list) {
+		if (area->ep == ep) {
+			dev_err(imx21->dev,
+				"Active DMEM %d for disabled ep=%p\n",
+				area->offset, ep);
+			list_del(&area->list);
+			kfree(area);
+		}
+	}
+}
+
+
+/* ===========================================	*/
+/* End handling 				*/
+/* ===========================================	*/
+static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb);
+
+/* Endpoint now idle - release it's ETD(s) or asssign to queued request */
+static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv)
+{
+	int etd_num;
+	int i;
+
+	for (i = 0; i < NUM_ISO_ETDS; i++) {
+		etd_num = ep_priv->etd[i];
+		if (etd_num < 0)
+			continue;
+
+		ep_priv->etd[i] = -1;
+		if (list_empty(&imx21->queue_for_etd)) {
+			free_etd(imx21, etd_num);
+			continue;
+		}
+
+		dev_dbg(imx21->dev,
+			"assigning idle etd %d for queued request\n", etd_num);
+		ep_priv = list_first_entry(&imx21->queue_for_etd,
+			struct ep_priv, queue);
+		list_del(&ep_priv->queue);
+		reset_etd(imx21, etd_num);
+		ep_priv->waiting_etd = 0;
+		ep_priv->etd[i] = etd_num;
+
+		if (list_empty(&ep_priv->ep->urb_list)) {
+			dev_err(imx21->dev, "No urb for queued ep!\n");
+			continue;
+		}
+		schedule_nonisoc_etd(imx21, list_first_entry(
+			&ep_priv->ep->urb_list, struct urb, urb_list));
+	}
+}
+
+static void urb_done(struct usb_hcd *hcd, struct urb *urb, int status)
+__releases(imx21->lock)
+__acquires(imx21->lock)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	struct ep_priv *ep_priv = urb->ep->hcpriv;
+	struct urb_priv *urb_priv = urb->hcpriv;
+
+	debug_urb_completed(imx21, urb, status);
+	dev_vdbg(imx21->dev, "urb %p done %d\n", urb, status);
+
+	kfree(urb_priv->isoc_td);
+	kfree(urb->hcpriv);
+	urb->hcpriv = NULL;
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	spin_unlock(&imx21->lock);
+	usb_hcd_giveback_urb(hcd, urb, status);
+	spin_lock(&imx21->lock);
+	if (list_empty(&ep_priv->ep->urb_list))
+		ep_idle(imx21, ep_priv);
+}
+
+/* ===========================================	*/
+/* ISOC Handling ... 				*/
+/* ===========================================	*/
+
+static void schedule_isoc_etds(struct usb_hcd *hcd,
+	struct usb_host_endpoint *ep)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	struct ep_priv *ep_priv = ep->hcpriv;
+	struct etd_priv *etd;
+	struct urb_priv *urb_priv;
+	struct td *td;
+	int etd_num;
+	int i;
+	int cur_frame;
+	u8 dir;
+
+	for (i = 0; i < NUM_ISO_ETDS; i++) {
+too_late:
+		if (list_empty(&ep_priv->td_list))
+			break;
+
+		etd_num = ep_priv->etd[i];
+		if (etd_num < 0)
+			break;
+
+		etd = &imx21->etd[etd_num];
+		if (etd->urb)
+			continue;
+
+		td = list_entry(ep_priv->td_list.next, struct td, list);
+		list_del(&td->list);
+		urb_priv = td->urb->hcpriv;
+
+		cur_frame = imx21_hc_get_frame(hcd);
+		if (frame_after(cur_frame, td->frame)) {
+			dev_dbg(imx21->dev, "isoc too late frame %d > %d\n",
+				cur_frame, td->frame);
+			urb_priv->isoc_status = -EXDEV;
+			td->urb->iso_frame_desc[
+				td->isoc_index].actual_length = 0;
+			td->urb->iso_frame_desc[td->isoc_index].status = -EXDEV;
+			if (--urb_priv->isoc_remaining == 0)
+				urb_done(hcd, td->urb, urb_priv->isoc_status);
+			goto too_late;
+		}
+
+		urb_priv->active = 1;
+		etd->td = td;
+		etd->ep = td->ep;
+		etd->urb = td->urb;
+		etd->len = td->len;
+
+		debug_isoc_submitted(imx21, cur_frame, td);
+
+		dir = usb_pipeout(td->urb->pipe) ? TD_DIR_OUT : TD_DIR_IN;
+		setup_etd_dword0(imx21, etd_num, td->urb, dir, etd->dmem_size);
+		etd_writel(imx21, etd_num, 1, etd->dmem_offset);
+		etd_writel(imx21, etd_num, 2,
+			(TD_NOTACCESSED << DW2_COMPCODE) |
+			((td->frame & 0xFFFF) << DW2_STARTFRM));
+		etd_writel(imx21, etd_num, 3,
+			(TD_NOTACCESSED << DW3_COMPCODE0) |
+			(td->len << DW3_PKTLEN0));
+
+		activate_etd(imx21, etd_num, td->data, dir);
+	}
+}
+
+static void isoc_etd_done(struct usb_hcd *hcd, struct urb *urb, int etd_num)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	int etd_mask = 1 << etd_num;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	struct etd_priv *etd = imx21->etd + etd_num;
+	struct td *td = etd->td;
+	struct usb_host_endpoint *ep = etd->ep;
+	int isoc_index = td->isoc_index;
+	unsigned int pipe = urb->pipe;
+	int dir_in = usb_pipein(pipe);
+	int cc;
+	int bytes_xfrd;
+
+	disactivate_etd(imx21, etd_num);
+
+	cc = (etd_readl(imx21, etd_num, 3) >> DW3_COMPCODE0) & 0xf;
+	bytes_xfrd = etd_readl(imx21, etd_num, 3) & 0x3ff;
+
+	/* Input doesn't always fill the buffer, don't generate an error
+	 * when this happens.
+	 */
+	if (dir_in && (cc == TD_DATAUNDERRUN))
+		cc = TD_CC_NOERROR;
+
+	if (cc == TD_NOTACCESSED)
+		bytes_xfrd = 0;
+
+	debug_isoc_completed(imx21,
+		imx21_hc_get_frame(hcd), td, cc, bytes_xfrd);
+	if (cc) {
+		urb_priv->isoc_status = -EXDEV;
+		dev_dbg(imx21->dev,
+			"bad iso cc=0x%X frame=%d sched frame=%d "
+			"cnt=%d len=%d urb=%p etd=%d index=%d\n",
+			cc,  imx21_hc_get_frame(hcd), td->frame,
+			bytes_xfrd, td->len, urb, etd_num, isoc_index);
+	}
+
+	if (dir_in)
+		clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
+
+	urb->actual_length += bytes_xfrd;
+	urb->iso_frame_desc[isoc_index].actual_length = bytes_xfrd;
+	urb->iso_frame_desc[isoc_index].status = cc_to_error[cc];
+
+	etd->td = NULL;
+	etd->urb = NULL;
+	etd->ep = NULL;
+
+	if (--urb_priv->isoc_remaining == 0)
+		urb_done(hcd, urb, urb_priv->isoc_status);
+
+	schedule_isoc_etds(hcd, ep);
+}
+
+static struct ep_priv *alloc_isoc_ep(
+	struct imx21 *imx21, struct usb_host_endpoint *ep)
+{
+	struct ep_priv *ep_priv;
+	int i;
+
+	ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC);
+	if (ep_priv == NULL)
+		return NULL;
+
+	/* Allocate the ETDs */
+	for (i = 0; i < NUM_ISO_ETDS; i++) {
+		ep_priv->etd[i] = alloc_etd(imx21);
+		if (ep_priv->etd[i] < 0) {
+			int j;
+			dev_err(imx21->dev, "isoc: Couldn't allocate etd\n");
+			for (j = 0; j < i; j++)
+				free_etd(imx21, ep_priv->etd[j]);
+			goto alloc_etd_failed;
+		}
+		imx21->etd[ep_priv->etd[i]].ep = ep;
+	}
+
+	INIT_LIST_HEAD(&ep_priv->td_list);
+	ep_priv->ep = ep;
+	ep->hcpriv = ep_priv;
+	return ep_priv;
+
+alloc_etd_failed:
+	kfree(ep_priv);
+	return NULL;
+}
+
+static int imx21_hc_urb_enqueue_isoc(struct usb_hcd *hcd,
+				     struct usb_host_endpoint *ep,
+				     struct urb *urb, gfp_t mem_flags)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	struct urb_priv *urb_priv;
+	unsigned long flags;
+	struct ep_priv *ep_priv;
+	struct td *td = NULL;
+	int i;
+	int ret;
+	int cur_frame;
+	u16 maxpacket;
+
+	urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags);
+	if (urb_priv == NULL)
+		return -ENOMEM;
+
+	urb_priv->isoc_td = kzalloc(
+		sizeof(struct td) * urb->number_of_packets, mem_flags);
+	if (urb_priv->isoc_td == NULL) {
+		ret = -ENOMEM;
+		goto alloc_td_failed;
+	}
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	if (ep->hcpriv == NULL) {
+		ep_priv = alloc_isoc_ep(imx21, ep);
+		if (ep_priv == NULL) {
+			ret = -ENOMEM;
+			goto alloc_ep_failed;
+		}
+	} else {
+		ep_priv = ep->hcpriv;
+	}
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto link_failed;
+
+	urb->status = -EINPROGRESS;
+	urb->actual_length = 0;
+	urb->error_count = 0;
+	urb->hcpriv = urb_priv;
+	urb_priv->ep = ep;
+
+	/* allocate data memory for largest packets if not already done */
+	maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+	for (i = 0; i < NUM_ISO_ETDS; i++) {
+		struct etd_priv *etd = &imx21->etd[ep_priv->etd[i]];
+
+		if (etd->dmem_size > 0 && etd->dmem_size < maxpacket) {
+			/* not sure if this can really occur.... */
+			dev_err(imx21->dev, "increasing isoc buffer %d->%d\n",
+				etd->dmem_size, maxpacket);
+			ret = -EMSGSIZE;
+			goto alloc_dmem_failed;
+		}
+
+		if (etd->dmem_size == 0) {
+			etd->dmem_offset = alloc_dmem(imx21, maxpacket, ep);
+			if (etd->dmem_offset < 0) {
+				dev_dbg(imx21->dev, "failed alloc isoc dmem\n");
+				ret = -EAGAIN;
+				goto alloc_dmem_failed;
+			}
+			etd->dmem_size = maxpacket;
+		}
+	}
+
+	/* calculate frame */
+	cur_frame = imx21_hc_get_frame(hcd);
+	if (urb->transfer_flags & URB_ISO_ASAP) {
+		if (list_empty(&ep_priv->td_list))
+			urb->start_frame = cur_frame + 5;
+		else
+			urb->start_frame = list_entry(
+				ep_priv->td_list.prev,
+				struct td, list)->frame + urb->interval;
+	}
+	urb->start_frame = wrap_frame(urb->start_frame);
+	if (frame_after(cur_frame, urb->start_frame)) {
+		dev_dbg(imx21->dev,
+			"enqueue: adjusting iso start %d (cur=%d) asap=%d\n",
+			urb->start_frame, cur_frame,
+			(urb->transfer_flags & URB_ISO_ASAP) != 0);
+		urb->start_frame = wrap_frame(cur_frame + 1);
+	}
+
+	/* set up transfers */
+	td = urb_priv->isoc_td;
+	for (i = 0; i < urb->number_of_packets; i++, td++) {
+		td->ep = ep;
+		td->urb = urb;
+		td->len = urb->iso_frame_desc[i].length;
+		td->isoc_index = i;
+		td->frame = wrap_frame(urb->start_frame + urb->interval * i);
+		td->data = urb->transfer_dma + urb->iso_frame_desc[i].offset;
+		list_add_tail(&td->list, &ep_priv->td_list);
+	}
+
+	urb_priv->isoc_remaining = urb->number_of_packets;
+	dev_vdbg(imx21->dev, "setup %d packets for iso frame %d->%d\n",
+		urb->number_of_packets, urb->start_frame, td->frame);
+
+	debug_urb_submitted(imx21, urb);
+	schedule_isoc_etds(hcd, ep);
+
+	spin_unlock_irqrestore(&imx21->lock, flags);
+	return 0;
+
+alloc_dmem_failed:
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+link_failed:
+alloc_ep_failed:
+	spin_unlock_irqrestore(&imx21->lock, flags);
+	kfree(urb_priv->isoc_td);
+
+alloc_td_failed:
+	kfree(urb_priv);
+	return ret;
+}
+
+static void dequeue_isoc_urb(struct imx21 *imx21,
+	struct urb *urb, struct ep_priv *ep_priv)
+{
+	struct urb_priv *urb_priv = urb->hcpriv;
+	struct td *td, *tmp;
+	int i;
+
+	if (urb_priv->active) {
+		for (i = 0; i < NUM_ISO_ETDS; i++) {
+			int etd_num = ep_priv->etd[i];
+			if (etd_num != -1 && imx21->etd[etd_num].urb == urb) {
+				struct etd_priv *etd = imx21->etd + etd_num;
+
+				reset_etd(imx21, etd_num);
+				if (etd->dmem_size)
+					free_dmem(imx21, etd->dmem_offset);
+				etd->dmem_size = 0;
+			}
+		}
+	}
+
+	list_for_each_entry_safe(td, tmp, &ep_priv->td_list, list) {
+		if (td->urb == urb) {
+			dev_vdbg(imx21->dev, "removing td %p\n", td);
+			list_del(&td->list);
+		}
+	}
+}
+
+/* =========================================== */
+/* NON ISOC Handling ... 			*/
+/* =========================================== */
+
+static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb)
+{
+	unsigned int pipe = urb->pipe;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	struct ep_priv *ep_priv = urb_priv->ep->hcpriv;
+	int state = urb_priv->state;
+	int etd_num = ep_priv->etd[0];
+	struct etd_priv *etd;
+	int dmem_offset;
+	u32 count;
+	u16 etd_buf_size;
+	u16 maxpacket;
+	u8 dir;
+	u8 bufround;
+	u8 datatoggle;
+	u8 interval = 0;
+	u8 relpolpos = 0;
+
+	if (etd_num < 0) {
+		dev_err(imx21->dev, "No valid ETD\n");
+		return;
+	}
+	if (readl(imx21->regs + USBH_ETDENSET) & (1 << etd_num))
+		dev_err(imx21->dev, "submitting to active ETD %d\n", etd_num);
+
+	etd = &imx21->etd[etd_num];
+	maxpacket = usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe));
+	if (!maxpacket)
+		maxpacket = 8;
+
+	if (usb_pipecontrol(pipe) && (state != US_CTRL_DATA)) {
+		if (state == US_CTRL_SETUP) {
+			dir = TD_DIR_SETUP;
+			etd->dma_handle = urb->setup_dma;
+			bufround = 0;
+			count = 8;
+			datatoggle = TD_TOGGLE_DATA0;
+		} else {	/* US_CTRL_ACK */
+			dir = usb_pipeout(pipe) ? TD_DIR_IN : TD_DIR_OUT;
+			etd->dma_handle = urb->transfer_dma;
+			bufround = 0;
+			count = 0;
+			datatoggle = TD_TOGGLE_DATA1;
+		}
+	} else {
+		dir = usb_pipeout(pipe) ? TD_DIR_OUT : TD_DIR_IN;
+		bufround = (dir == TD_DIR_IN) ? 1 : 0;
+		etd->dma_handle = urb->transfer_dma;
+		if (usb_pipebulk(pipe) && (state == US_BULK0))
+			count = 0;
+		else
+			count = urb->transfer_buffer_length;
+
+		if (usb_pipecontrol(pipe)) {
+			datatoggle = TD_TOGGLE_DATA1;
+		} else {
+			if (usb_gettoggle(
+					urb->dev,
+					usb_pipeendpoint(urb->pipe),
+					usb_pipeout(urb->pipe)))
+				datatoggle = TD_TOGGLE_DATA1;
+			else
+				datatoggle = TD_TOGGLE_DATA0;
+		}
+	}
+
+	etd->urb = urb;
+	etd->ep = urb_priv->ep;
+	etd->len = count;
+
+	if (usb_pipeint(pipe)) {
+		interval = urb->interval;
+		relpolpos = (readl(imx21->regs + USBH_FRMNUB) + 1) & 0xff;
+	}
+
+	/* Write ETD to device memory */
+	setup_etd_dword0(imx21, etd_num, urb, dir, maxpacket);
+
+	etd_writel(imx21, etd_num, 2,
+		(u32) interval << DW2_POLINTERV |
+		((u32) relpolpos << DW2_RELPOLPOS) |
+		((u32) dir << DW2_DIRPID) |
+		((u32) bufround << DW2_BUFROUND) |
+		((u32) datatoggle << DW2_DATATOG) |
+		((u32) TD_NOTACCESSED << DW2_COMPCODE));
+
+	/* DMA will always transfer buffer size even if TOBYCNT in DWORD3
+	   is smaller. Make sure we don't overrun the buffer!
+	 */
+	if (count && count < maxpacket)
+		etd_buf_size = count;
+	else
+		etd_buf_size = maxpacket;
+
+	etd_writel(imx21, etd_num, 3,
+		((u32) (etd_buf_size - 1) << DW3_BUFSIZE) | (u32) count);
+
+	if (!count)
+		etd->dma_handle = 0;
+
+	/* allocate x and y buffer space at once */
+	etd->dmem_size = (count > maxpacket) ? maxpacket * 2 : maxpacket;
+	dmem_offset = alloc_dmem(imx21, etd->dmem_size, urb_priv->ep);
+	if (dmem_offset < 0) {
+		/* Setup everything we can in HW and update when we get DMEM */
+		etd_writel(imx21, etd_num, 1, (u32)maxpacket << 16);
+
+		dev_dbg(imx21->dev, "Queuing etd %d for DMEM\n", etd_num);
+		debug_urb_queued_for_dmem(imx21, urb);
+		list_add_tail(&etd->queue, &imx21->queue_for_dmem);
+		return;
+	}
+
+	etd_writel(imx21, etd_num, 1,
+		(((u32) dmem_offset + (u32) maxpacket) << DW1_YBUFSRTAD) |
+		(u32) dmem_offset);
+
+	urb_priv->active = 1;
+
+	/* enable the ETD to kick off transfer */
+	dev_vdbg(imx21->dev, "Activating etd %d for %d bytes %s\n",
+		etd_num, count, dir != TD_DIR_IN ? "out" : "in");
+	activate_etd(imx21, etd_num, etd->dma_handle, dir);
+
+}
+
+static void nonisoc_etd_done(struct usb_hcd *hcd, struct urb *urb, int etd_num)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	struct etd_priv *etd = &imx21->etd[etd_num];
+	u32 etd_mask = 1 << etd_num;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	int dir;
+	u16 xbufaddr;
+	int cc;
+	u32 bytes_xfrd;
+	int etd_done;
+
+	disactivate_etd(imx21, etd_num);
+
+	dir = (etd_readl(imx21, etd_num, 0) >> DW0_DIRECT) & 0x3;
+	xbufaddr = etd_readl(imx21, etd_num, 1) & 0xffff;
+	cc = (etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE) & 0xf;
+	bytes_xfrd = etd->len - (etd_readl(imx21, etd_num, 3) & 0x1fffff);
+
+	/* save toggle carry */
+	usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+		      usb_pipeout(urb->pipe),
+		      (etd_readl(imx21, etd_num, 0) >> DW0_TOGCRY) & 0x1);
+
+	if (dir == TD_DIR_IN) {
+		clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask);
+		clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask);
+	}
+	free_dmem(imx21, xbufaddr);
+
+	urb->error_count = 0;
+	if (!(urb->transfer_flags & URB_SHORT_NOT_OK)
+			&& (cc == TD_DATAUNDERRUN))
+		cc = TD_CC_NOERROR;
+
+	if (cc != 0)
+		dev_vdbg(imx21->dev, "cc is 0x%x\n", cc);
+
+	etd_done = (cc_to_error[cc] != 0);	/* stop if error */
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+		switch (urb_priv->state) {
+		case US_CTRL_SETUP:
+			if (urb->transfer_buffer_length > 0)
+				urb_priv->state = US_CTRL_DATA;
+			else
+				urb_priv->state = US_CTRL_ACK;
+			break;
+		case US_CTRL_DATA:
+			urb->actual_length += bytes_xfrd;
+			urb_priv->state = US_CTRL_ACK;
+			break;
+		case US_CTRL_ACK:
+			etd_done = 1;
+			break;
+		default:
+			dev_err(imx21->dev,
+				"Invalid pipe state %d\n", urb_priv->state);
+			etd_done = 1;
+			break;
+		}
+		break;
+
+	case PIPE_BULK:
+		urb->actual_length += bytes_xfrd;
+		if ((urb_priv->state == US_BULK)
+		    && (urb->transfer_flags & URB_ZERO_PACKET)
+		    && urb->transfer_buffer_length > 0
+		    && ((urb->transfer_buffer_length %
+			 usb_maxpacket(urb->dev, urb->pipe,
+				       usb_pipeout(urb->pipe))) == 0)) {
+			/* need a 0-packet */
+			urb_priv->state = US_BULK0;
+		} else {
+			etd_done = 1;
+		}
+		break;
+
+	case PIPE_INTERRUPT:
+		urb->actual_length += bytes_xfrd;
+		etd_done = 1;
+		break;
+	}
+
+	if (!etd_done) {
+		dev_vdbg(imx21->dev, "next state=%d\n", urb_priv->state);
+		schedule_nonisoc_etd(imx21, urb);
+	} else {
+		struct usb_host_endpoint *ep = urb->ep;
+
+		urb_done(hcd, urb, cc_to_error[cc]);
+		etd->urb = NULL;
+
+		if (!list_empty(&ep->urb_list)) {
+			urb = list_first_entry(&ep->urb_list,
+				struct urb, urb_list);
+			dev_vdbg(imx21->dev, "next URB %p\n", urb);
+			schedule_nonisoc_etd(imx21, urb);
+		}
+	}
+}
+
+static struct ep_priv *alloc_ep(void)
+{
+	int i;
+	struct ep_priv *ep_priv;
+
+	ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC);
+	if (!ep_priv)
+		return NULL;
+
+	for (i = 0; i < NUM_ISO_ETDS; ++i)
+		ep_priv->etd[i] = -1;
+
+	return ep_priv;
+}
+
+static int imx21_hc_urb_enqueue(struct usb_hcd *hcd,
+				struct urb *urb, gfp_t mem_flags)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	struct usb_host_endpoint *ep = urb->ep;
+	struct urb_priv *urb_priv;
+	struct ep_priv *ep_priv;
+	struct etd_priv *etd;
+	int ret;
+	unsigned long flags;
+	int new_ep = 0;
+
+	dev_vdbg(imx21->dev,
+		"enqueue urb=%p ep=%p len=%d "
+		"buffer=%p dma=%08X setupBuf=%p setupDma=%08X\n",
+		urb, ep,
+		urb->transfer_buffer_length,
+		urb->transfer_buffer, urb->transfer_dma,
+		urb->setup_packet, urb->setup_dma);
+
+	if (usb_pipeisoc(urb->pipe))
+		return imx21_hc_urb_enqueue_isoc(hcd, ep, urb, mem_flags);
+
+	urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags);
+	if (!urb_priv)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	ep_priv = ep->hcpriv;
+	if (ep_priv == NULL) {
+		ep_priv = alloc_ep();
+		if (!ep_priv) {
+			ret = -ENOMEM;
+			goto failed_alloc_ep;
+		}
+		ep->hcpriv = ep_priv;
+		ep_priv->ep = ep;
+		new_ep = 1;
+	}
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto failed_link;
+
+	urb->status = -EINPROGRESS;
+	urb->actual_length = 0;
+	urb->error_count = 0;
+	urb->hcpriv = urb_priv;
+	urb_priv->ep = ep;
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+		urb_priv->state = US_CTRL_SETUP;
+		break;
+	case PIPE_BULK:
+		urb_priv->state = US_BULK;
+		break;
+	}
+
+	debug_urb_submitted(imx21, urb);
+	if (ep_priv->etd[0] < 0) {
+		if (ep_priv->waiting_etd) {
+			dev_dbg(imx21->dev,
+				"no ETD available already queued %p\n",
+				ep_priv);
+			debug_urb_queued_for_etd(imx21, urb);
+			goto out;
+		}
+		ep_priv->etd[0] = alloc_etd(imx21);
+		if (ep_priv->etd[0] < 0) {
+			dev_dbg(imx21->dev,
+				"no ETD available queueing %p\n", ep_priv);
+			debug_urb_queued_for_etd(imx21, urb);
+			list_add_tail(&ep_priv->queue, &imx21->queue_for_etd);
+			ep_priv->waiting_etd = 1;
+			goto out;
+		}
+	}
+
+	/* Schedule if no URB already active for this endpoint */
+	etd = &imx21->etd[ep_priv->etd[0]];
+	if (etd->urb == NULL) {
+		DEBUG_LOG_FRAME(imx21, etd, last_req);
+		schedule_nonisoc_etd(imx21, urb);
+	}
+
+out:
+	spin_unlock_irqrestore(&imx21->lock, flags);
+	return 0;
+
+failed_link:
+failed_alloc_ep:
+	spin_unlock_irqrestore(&imx21->lock, flags);
+	kfree(urb_priv);
+	return ret;
+}
+
+static int imx21_hc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+				int status)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	unsigned long flags;
+	struct usb_host_endpoint *ep;
+	struct ep_priv *ep_priv;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	int ret = -EINVAL;
+
+	dev_vdbg(imx21->dev, "dequeue urb=%p iso=%d status=%d\n",
+		urb, usb_pipeisoc(urb->pipe), status);
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto fail;
+	ep = urb_priv->ep;
+	ep_priv = ep->hcpriv;
+
+	debug_urb_unlinked(imx21, urb);
+
+	if (usb_pipeisoc(urb->pipe)) {
+		dequeue_isoc_urb(imx21, urb, ep_priv);
+		schedule_isoc_etds(hcd, ep);
+	} else if (urb_priv->active) {
+		int etd_num = ep_priv->etd[0];
+		if (etd_num != -1) {
+			disactivate_etd(imx21, etd_num);
+			free_dmem(imx21, etd_readl(imx21, etd_num, 1) & 0xffff);
+			imx21->etd[etd_num].urb = NULL;
+		}
+	}
+
+	urb_done(hcd, urb, status);
+
+	spin_unlock_irqrestore(&imx21->lock, flags);
+	return 0;
+
+fail:
+	spin_unlock_irqrestore(&imx21->lock, flags);
+	return ret;
+}
+
+/* =========================================== */
+/* Interrupt dispatch	 			*/
+/* =========================================== */
+
+static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof)
+{
+	int etd_num;
+	int enable_sof_int = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	for (etd_num = 0; etd_num < USB_NUM_ETD; etd_num++) {
+		u32 etd_mask = 1 << etd_num;
+		u32 enabled = readl(imx21->regs + USBH_ETDENSET) & etd_mask;
+		u32 done = readl(imx21->regs + USBH_ETDDONESTAT) & etd_mask;
+		struct etd_priv *etd = &imx21->etd[etd_num];
+
+
+		if (done) {
+			DEBUG_LOG_FRAME(imx21, etd, last_int);
+		} else {
+/*
+ * Kludge warning!
+ *
+ * When multiple transfers are using the bus we sometimes get into a state
+ * where the transfer has completed (the CC field of the ETD is != 0x0F),
+ * the ETD has self disabled but the ETDDONESTAT flag is not set
+ * (and hence no interrupt occurs).
+ * This causes the transfer in question to hang.
+ * The kludge below checks for this condition at each SOF and processes any
+ * blocked ETDs (after an arbitary 10 frame wait)
+ *
+ * With a single active transfer the usbtest test suite will run for days
+ * without the kludge.
+ * With other bus activity (eg mass storage) even just test1 will hang without
+ * the kludge.
+ */
+			u32 dword0;
+			int cc;
+
+			if (etd->active_count && !enabled) /* suspicious... */
+				enable_sof_int = 1;
+
+			if (!sof || enabled || !etd->active_count)
+				continue;
+
+			cc = etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE;
+			if (cc == TD_NOTACCESSED)
+				continue;
+
+			if (++etd->active_count < 10)
+				continue;
+
+			dword0 = etd_readl(imx21, etd_num, 0);
+			dev_dbg(imx21->dev,
+				"unblock ETD %d dev=0x%X ep=0x%X cc=0x%02X!\n",
+				etd_num, dword0 & 0x7F,
+				(dword0 >> DW0_ENDPNT) & 0x0F,
+				cc);
+
+#ifdef DEBUG
+			dev_dbg(imx21->dev,
+				"frame: act=%d disact=%d"
+				" int=%d req=%d cur=%d\n",
+				etd->activated_frame,
+				etd->disactivated_frame,
+				etd->last_int_frame,
+				etd->last_req_frame,
+				readl(imx21->regs + USBH_FRMNUB));
+			imx21->debug_unblocks++;
+#endif
+			etd->active_count = 0;
+/* End of kludge */
+		}
+
+		if (etd->ep == NULL || etd->urb == NULL) {
+			dev_dbg(imx21->dev,
+				"Interrupt for unexpected etd %d"
+				" ep=%p urb=%p\n",
+				etd_num, etd->ep, etd->urb);
+			disactivate_etd(imx21, etd_num);
+			continue;
+		}
+
+		if (usb_pipeisoc(etd->urb->pipe))
+			isoc_etd_done(hcd, etd->urb, etd_num);
+		else
+			nonisoc_etd_done(hcd, etd->urb, etd_num);
+	}
+
+	/* only enable SOF interrupt if it may be needed for the kludge */
+	if (enable_sof_int)
+		set_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT);
+	else
+		clear_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT);
+
+
+	spin_unlock_irqrestore(&imx21->lock, flags);
+}
+
+static irqreturn_t imx21_irq(struct usb_hcd *hcd)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	u32 ints = readl(imx21->regs + USBH_SYSISR);
+
+	if (ints & USBH_SYSIEN_HERRINT)
+		dev_dbg(imx21->dev, "Scheduling error\n");
+
+	if (ints & USBH_SYSIEN_SORINT)
+		dev_dbg(imx21->dev, "Scheduling overrun\n");
+
+	if (ints & (USBH_SYSISR_DONEINT | USBH_SYSISR_SOFINT))
+		process_etds(hcd, imx21, ints & USBH_SYSISR_SOFINT);
+
+	writel(ints, imx21->regs + USBH_SYSISR);
+	return IRQ_HANDLED;
+}
+
+static void imx21_hc_endpoint_disable(struct usb_hcd *hcd,
+				      struct usb_host_endpoint *ep)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	unsigned long flags;
+	struct ep_priv *ep_priv;
+	int i;
+
+	if (ep == NULL)
+		return;
+
+	spin_lock_irqsave(&imx21->lock, flags);
+	ep_priv = ep->hcpriv;
+	dev_vdbg(imx21->dev, "disable ep=%p, ep->hcpriv=%p\n", ep, ep_priv);
+
+	if (!list_empty(&ep->urb_list))
+		dev_dbg(imx21->dev, "ep's URB list is not empty\n");
+
+	if (ep_priv != NULL) {
+		for (i = 0; i < NUM_ISO_ETDS; i++) {
+			if (ep_priv->etd[i] > -1)
+				dev_dbg(imx21->dev, "free etd %d for disable\n",
+					ep_priv->etd[i]);
+
+			free_etd(imx21, ep_priv->etd[i]);
+		}
+		kfree(ep_priv);
+		ep->hcpriv = NULL;
+	}
+
+	for (i = 0; i < USB_NUM_ETD; i++) {
+		if (imx21->etd[i].alloc && imx21->etd[i].ep == ep) {
+			dev_err(imx21->dev,
+				"Active etd %d for disabled ep=%p!\n", i, ep);
+			free_etd(imx21, i);
+		}
+	}
+	free_epdmem(imx21, ep);
+	spin_unlock_irqrestore(&imx21->lock, flags);
+}
+
+/* =========================================== */
+/* Hub handling		 			*/
+/* =========================================== */
+
+static int get_hub_descriptor(struct usb_hcd *hcd,
+			      struct usb_hub_descriptor *desc)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	desc->bDescriptorType = 0x29;	/* HUB descriptor */
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = readl(imx21->regs + USBH_ROOTHUBA)
+		& USBH_ROOTHUBA_NDNSTMPRT_MASK;
+	desc->bDescLength = 9;
+	desc->bPwrOn2PwrGood = 0;
+	desc->wHubCharacteristics = (__force __u16) cpu_to_le16(
+		0x0002 |	/* No power switching */
+		0x0010 |	/* No over current protection */
+		0);
+
+	desc->bitmap[0] = 1 << 1;
+	desc->bitmap[1] = ~0;
+	return 0;
+}
+
+static int imx21_hc_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	int ports;
+	int changed = 0;
+	int i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&imx21->lock, flags);
+	ports = readl(imx21->regs + USBH_ROOTHUBA)
+		& USBH_ROOTHUBA_NDNSTMPRT_MASK;
+	if (ports > 7) {
+		ports = 7;
+		dev_err(imx21->dev, "ports %d > 7\n", ports);
+	}
+	for (i = 0; i < ports; i++) {
+		if (readl(imx21->regs + USBH_PORTSTAT(i)) &
+			(USBH_PORTSTAT_CONNECTSC |
+			USBH_PORTSTAT_PRTENBLSC |
+			USBH_PORTSTAT_PRTSTATSC |
+			USBH_PORTSTAT_OVRCURIC |
+			USBH_PORTSTAT_PRTRSTSC)) {
+
+			changed = 1;
+			buf[0] |= 1 << (i + 1);
+		}
+	}
+	spin_unlock_irqrestore(&imx21->lock, flags);
+
+	if (changed)
+		dev_info(imx21->dev, "Hub status changed\n");
+	return changed;
+}
+
+static int imx21_hc_hub_control(struct usb_hcd *hcd,
+				u16 typeReq,
+				u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	int rc = 0;
+	u32 status_write = 0;
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		dev_dbg(imx21->dev, "ClearHubFeature\n");
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+			dev_dbg(imx21->dev, "    OVER_CURRENT\n");
+			break;
+		case C_HUB_LOCAL_POWER:
+			dev_dbg(imx21->dev, "    LOCAL_POWER\n");
+			break;
+		default:
+			dev_dbg(imx21->dev, "    unknown\n");
+			rc = -EINVAL;
+			break;
+		}
+		break;
+
+	case ClearPortFeature:
+		dev_dbg(imx21->dev, "ClearPortFeature\n");
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			dev_dbg(imx21->dev, "    ENABLE\n");
+			status_write = USBH_PORTSTAT_CURCONST;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(imx21->dev, "    SUSPEND\n");
+			status_write = USBH_PORTSTAT_PRTOVRCURI;
+			break;
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(imx21->dev, "    POWER\n");
+			status_write = USBH_PORTSTAT_LSDEVCON;
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			dev_dbg(imx21->dev, "    C_ENABLE\n");
+			status_write = USBH_PORTSTAT_PRTENBLSC;
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			dev_dbg(imx21->dev, "    C_SUSPEND\n");
+			status_write = USBH_PORTSTAT_PRTSTATSC;
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			dev_dbg(imx21->dev, "    C_CONNECTION\n");
+			status_write = USBH_PORTSTAT_CONNECTSC;
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(imx21->dev, "    C_OVER_CURRENT\n");
+			status_write = USBH_PORTSTAT_OVRCURIC;
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			dev_dbg(imx21->dev, "    C_RESET\n");
+			status_write = USBH_PORTSTAT_PRTRSTSC;
+			break;
+		default:
+			dev_dbg(imx21->dev, "    unknown\n");
+			rc = -EINVAL;
+			break;
+		}
+
+		break;
+
+	case GetHubDescriptor:
+		dev_dbg(imx21->dev, "GetHubDescriptor\n");
+		rc = get_hub_descriptor(hcd, (void *)buf);
+		break;
+
+	case GetHubStatus:
+		dev_dbg(imx21->dev, "  GetHubStatus\n");
+		*(__le32 *) buf = 0;
+		break;
+
+	case GetPortStatus:
+		dev_dbg(imx21->dev, "GetPortStatus: port: %d, 0x%x\n",
+		    wIndex, USBH_PORTSTAT(wIndex - 1));
+		*(__le32 *) buf = readl(imx21->regs +
+			USBH_PORTSTAT(wIndex - 1));
+		break;
+
+	case SetHubFeature:
+		dev_dbg(imx21->dev, "SetHubFeature\n");
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+			dev_dbg(imx21->dev, "    OVER_CURRENT\n");
+			break;
+
+		case C_HUB_LOCAL_POWER:
+			dev_dbg(imx21->dev, "    LOCAL_POWER\n");
+			break;
+		default:
+			dev_dbg(imx21->dev, "    unknown\n");
+			rc = -EINVAL;
+			break;
+		}
+
+		break;
+
+	case SetPortFeature:
+		dev_dbg(imx21->dev, "SetPortFeature\n");
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			dev_dbg(imx21->dev, "    SUSPEND\n");
+			status_write = USBH_PORTSTAT_PRTSUSPST;
+			break;
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(imx21->dev, "    POWER\n");
+			status_write = USBH_PORTSTAT_PRTPWRST;
+			break;
+		case USB_PORT_FEAT_RESET:
+			dev_dbg(imx21->dev, "    RESET\n");
+			status_write = USBH_PORTSTAT_PRTRSTST;
+			break;
+		default:
+			dev_dbg(imx21->dev, "    unknown\n");
+			rc = -EINVAL;
+			break;
+		}
+		break;
+
+	default:
+		dev_dbg(imx21->dev, "  unknown\n");
+		rc = -EINVAL;
+		break;
+	}
+
+	if (status_write)
+		writel(status_write, imx21->regs + USBH_PORTSTAT(wIndex - 1));
+	return rc;
+}
+
+/* =========================================== */
+/* Host controller management 			*/
+/* =========================================== */
+
+static int imx21_hc_reset(struct usb_hcd *hcd)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	unsigned long timeout;
+	unsigned long flags;
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	/* Reset the Host controler modules */
+	writel(USBOTG_RST_RSTCTRL | USBOTG_RST_RSTRH |
+		USBOTG_RST_RSTHSIE | USBOTG_RST_RSTHC,
+		imx21->regs + USBOTG_RST_CTRL);
+
+	/* Wait for reset to finish */
+	timeout = jiffies + HZ;
+	while (readl(imx21->regs + USBOTG_RST_CTRL) != 0) {
+		if (time_after(jiffies, timeout)) {
+			spin_unlock_irqrestore(&imx21->lock, flags);
+			dev_err(imx21->dev, "timeout waiting for reset\n");
+			return -ETIMEDOUT;
+		}
+		spin_unlock_irq(&imx21->lock);
+		schedule_timeout(1);
+		spin_lock_irq(&imx21->lock);
+	}
+	spin_unlock_irqrestore(&imx21->lock, flags);
+	return 0;
+}
+
+static int __devinit imx21_hc_start(struct usb_hcd *hcd)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	unsigned long flags;
+	int i, j;
+	u32 hw_mode = USBOTG_HWMODE_CRECFG_HOST;
+	u32 usb_control = 0;
+
+	hw_mode |= ((imx21->pdata->host_xcvr << USBOTG_HWMODE_HOSTXCVR_SHIFT) &
+			USBOTG_HWMODE_HOSTXCVR_MASK);
+	hw_mode |= ((imx21->pdata->otg_xcvr << USBOTG_HWMODE_OTGXCVR_SHIFT) &
+			USBOTG_HWMODE_OTGXCVR_MASK);
+
+	if (imx21->pdata->host1_txenoe)
+		usb_control |= USBCTRL_HOST1_TXEN_OE;
+
+	if (!imx21->pdata->host1_xcverless)
+		usb_control |= USBCTRL_HOST1_BYP_TLL;
+
+	if (imx21->pdata->otg_ext_xcvr)
+		usb_control |= USBCTRL_OTC_RCV_RXDP;
+
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	writel((USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN),
+		imx21->regs + USBOTG_CLK_CTRL);
+	writel(hw_mode, imx21->regs + USBOTG_HWMODE);
+	writel(usb_control, imx21->regs + USBCTRL);
+	writel(USB_MISCCONTROL_SKPRTRY  | USB_MISCCONTROL_ARBMODE,
+		imx21->regs + USB_MISCCONTROL);
+
+	/* Clear the ETDs */
+	for (i = 0; i < USB_NUM_ETD; i++)
+		for (j = 0; j < 4; j++)
+			etd_writel(imx21, i, j, 0);
+
+	/* Take the HC out of reset */
+	writel(USBH_HOST_CTRL_HCUSBSTE_OPERATIONAL | USBH_HOST_CTRL_CTLBLKSR_1,
+		imx21->regs + USBH_HOST_CTRL);
+
+	/* Enable ports */
+	if (imx21->pdata->enable_otg_host)
+		writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST,
+			imx21->regs + USBH_PORTSTAT(0));
+
+	if (imx21->pdata->enable_host1)
+		writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST,
+			imx21->regs + USBH_PORTSTAT(1));
+
+	if (imx21->pdata->enable_host2)
+		writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST,
+			imx21->regs + USBH_PORTSTAT(2));
+
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/* Enable host controller interrupts */
+	set_register_bits(imx21, USBH_SYSIEN,
+		USBH_SYSIEN_HERRINT |
+		USBH_SYSIEN_DONEINT | USBH_SYSIEN_SORINT);
+	set_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT);
+
+	spin_unlock_irqrestore(&imx21->lock, flags);
+
+	return 0;
+}
+
+static void imx21_hc_stop(struct usb_hcd *hcd)
+{
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	unsigned long flags;
+
+	spin_lock_irqsave(&imx21->lock, flags);
+
+	writel(0, imx21->regs + USBH_SYSIEN);
+	clear_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT);
+	clear_register_bits(imx21, USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN,
+					USBOTG_CLK_CTRL);
+	spin_unlock_irqrestore(&imx21->lock, flags);
+}
+
+/* =========================================== */
+/* Driver glue		 			*/
+/* =========================================== */
+
+static struct hc_driver imx21_hc_driver = {
+	.description = hcd_name,
+	.product_desc = "IMX21 USB Host Controller",
+	.hcd_priv_size = sizeof(struct imx21),
+
+	.flags = HCD_USB11,
+	.irq = imx21_irq,
+
+	.reset = imx21_hc_reset,
+	.start = imx21_hc_start,
+	.stop = imx21_hc_stop,
+
+	/* I/O requests */
+	.urb_enqueue = imx21_hc_urb_enqueue,
+	.urb_dequeue = imx21_hc_urb_dequeue,
+	.endpoint_disable = imx21_hc_endpoint_disable,
+
+	/* scheduling support */
+	.get_frame_number = imx21_hc_get_frame,
+
+	/* Root hub support */
+	.hub_status_data = imx21_hc_hub_status_data,
+	.hub_control = imx21_hc_hub_control,
+
+};
+
+static struct mx21_usbh_platform_data default_pdata = {
+	.host_xcvr = MX21_USBXCVR_TXDIF_RXDIF,
+	.otg_xcvr = MX21_USBXCVR_TXDIF_RXDIF,
+	.enable_host1 = 1,
+	.enable_host2 = 1,
+	.enable_otg_host = 1,
+
+};
+
+static int imx21_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct imx21 *imx21 = hcd_to_imx21(hcd);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	remove_debug_files(imx21);
+	usb_remove_hcd(hcd);
+
+	if (res != NULL) {
+		clk_disable(imx21->clk);
+		clk_put(imx21->clk);
+		iounmap(imx21->regs);
+		release_mem_region(res->start, resource_size(res));
+	}
+
+	kfree(hcd);
+	return 0;
+}
+
+
+static int imx21_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct imx21 *imx21;
+	struct resource *res;
+	int ret;
+	int irq;
+
+	printk(KERN_INFO "%s\n", imx21_hc_driver.product_desc);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	hcd = usb_create_hcd(&imx21_hc_driver,
+		&pdev->dev, dev_name(&pdev->dev));
+	if (hcd == NULL) {
+		dev_err(&pdev->dev, "Cannot create hcd (%s)\n",
+		    dev_name(&pdev->dev));
+		return -ENOMEM;
+	}
+
+	imx21 = hcd_to_imx21(hcd);
+	imx21->dev = &pdev->dev;
+	imx21->pdata = pdev->dev.platform_data;
+	if (!imx21->pdata)
+		imx21->pdata = &default_pdata;
+
+	spin_lock_init(&imx21->lock);
+	INIT_LIST_HEAD(&imx21->dmem_list);
+	INIT_LIST_HEAD(&imx21->queue_for_etd);
+	INIT_LIST_HEAD(&imx21->queue_for_dmem);
+	create_debug_files(imx21);
+
+	res = request_mem_region(res->start, resource_size(res), hcd_name);
+	if (!res) {
+		ret = -EBUSY;
+		goto failed_request_mem;
+	}
+
+	imx21->regs = ioremap(res->start, resource_size(res));
+	if (imx21->regs == NULL) {
+		dev_err(imx21->dev, "Cannot map registers\n");
+		ret = -ENOMEM;
+		goto failed_ioremap;
+	}
+
+	/* Enable clocks source */
+	imx21->clk = clk_get(imx21->dev, NULL);
+	if (IS_ERR(imx21->clk)) {
+		dev_err(imx21->dev, "no clock found\n");
+		ret = PTR_ERR(imx21->clk);
+		goto failed_clock_get;
+	}
+
+	ret = clk_set_rate(imx21->clk, clk_round_rate(imx21->clk, 48000000));
+	if (ret)
+		goto failed_clock_set;
+	ret = clk_enable(imx21->clk);
+	if (ret)
+		goto failed_clock_enable;
+
+	dev_info(imx21->dev, "Hardware HC revision: 0x%02X\n",
+		(readl(imx21->regs + USBOTG_HWMODE) >> 16) & 0xFF);
+
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	if (ret != 0) {
+		dev_err(imx21->dev, "usb_add_hcd() returned %d\n", ret);
+		goto failed_add_hcd;
+	}
+
+	return 0;
+
+failed_add_hcd:
+	clk_disable(imx21->clk);
+failed_clock_enable:
+failed_clock_set:
+	clk_put(imx21->clk);
+failed_clock_get:
+	iounmap(imx21->regs);
+failed_ioremap:
+	release_mem_region(res->start, res->end - res->start);
+failed_request_mem:
+	remove_debug_files(imx21);
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static struct platform_driver imx21_hcd_driver = {
+	.driver = {
+		   .name = (char *)hcd_name,
+		   },
+	.probe = imx21_probe,
+	.remove = imx21_remove,
+	.suspend = NULL,
+	.resume = NULL,
+};
+
+static int __init imx21_hcd_init(void)
+{
+	return platform_driver_register(&imx21_hcd_driver);
+}
+
+static void __exit imx21_hcd_cleanup(void)
+{
+	platform_driver_unregister(&imx21_hcd_driver);
+}
+
+module_init(imx21_hcd_init);
+module_exit(imx21_hcd_cleanup);
+
+MODULE_DESCRIPTION("i.MX21 USB Host controller");
+MODULE_AUTHOR("Martin Fuzzey");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:imx21-hcd");
diff --git a/drivers/usb/host/imx21-hcd.h b/drivers/usb/host/imx21-hcd.h
new file mode 100644
index 000000000000..1b0d913780a5
--- /dev/null
+++ b/drivers/usb/host/imx21-hcd.h
@@ -0,0 +1,436 @@
+/*
+ * Macros and prototypes for i.MX21
+ *
+ * Copyright (C) 2006 Loping Dog Embedded Systems
+ * Copyright (C) 2009 Martin Fuzzey
+ * Originally written by Jay Monkman <jtm@lopingdog.com>
+ * Ported to 2.6.30, debugged and enhanced by Martin Fuzzey
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_IMX21_HCD_H__
+#define __LINUX_IMX21_HCD_H__
+
+#include <mach/mx21-usbhost.h>
+
+#define NUM_ISO_ETDS 	2
+#define USB_NUM_ETD	32
+#define DMEM_SIZE   	4096
+
+/* Register definitions */
+#define USBOTG_HWMODE		0x00
+#define USBOTG_HWMODE_ANASDBEN		(1 << 14)
+#define USBOTG_HWMODE_OTGXCVR_SHIFT	6
+#define USBOTG_HWMODE_OTGXCVR_MASK	(3 << 6)
+#define USBOTG_HWMODE_OTGXCVR_TD_RD	(0 << 6)
+#define USBOTG_HWMODE_OTGXCVR_TS_RD	(2 << 6)
+#define USBOTG_HWMODE_OTGXCVR_TD_RS	(1 << 6)
+#define USBOTG_HWMODE_OTGXCVR_TS_RS	(3 << 6)
+#define USBOTG_HWMODE_HOSTXCVR_SHIFT	4
+#define USBOTG_HWMODE_HOSTXCVR_MASK	(3 << 4)
+#define USBOTG_HWMODE_HOSTXCVR_TD_RD	(0 << 4)
+#define USBOTG_HWMODE_HOSTXCVR_TS_RD	(2 << 4)
+#define USBOTG_HWMODE_HOSTXCVR_TD_RS	(1 << 4)
+#define USBOTG_HWMODE_HOSTXCVR_TS_RS	(3 << 4)
+#define USBOTG_HWMODE_CRECFG_MASK	(3 << 0)
+#define USBOTG_HWMODE_CRECFG_HOST	(1 << 0)
+#define USBOTG_HWMODE_CRECFG_FUNC	(2 << 0)
+#define USBOTG_HWMODE_CRECFG_HNP	(3 << 0)
+
+#define USBOTG_CINT_STAT	0x04
+#define USBOTG_CINT_STEN	0x08
+#define USBOTG_ASHNPINT			(1 << 5)
+#define USBOTG_ASFCINT			(1 << 4)
+#define USBOTG_ASHCINT			(1 << 3)
+#define USBOTG_SHNPINT			(1 << 2)
+#define USBOTG_FCINT			(1 << 1)
+#define USBOTG_HCINT			(1 << 0)
+
+#define USBOTG_CLK_CTRL		0x0c
+#define USBOTG_CLK_CTRL_FUNC		(1 << 2)
+#define USBOTG_CLK_CTRL_HST		(1 << 1)
+#define USBOTG_CLK_CTRL_MAIN		(1 << 0)
+
+#define USBOTG_RST_CTRL		0x10
+#define USBOTG_RST_RSTI2C		(1 << 15)
+#define USBOTG_RST_RSTCTRL		(1 << 5)
+#define USBOTG_RST_RSTFC		(1 << 4)
+#define USBOTG_RST_RSTFSKE		(1 << 3)
+#define USBOTG_RST_RSTRH		(1 << 2)
+#define USBOTG_RST_RSTHSIE		(1 << 1)
+#define USBOTG_RST_RSTHC		(1 << 0)
+
+#define USBOTG_FRM_INTVL    	0x14
+#define USBOTG_FRM_REMAIN   	0x18
+#define USBOTG_HNP_CSR	    	0x1c
+#define USBOTG_HNP_ISR	    	0x2c
+#define USBOTG_HNP_IEN	    	0x30
+
+#define USBOTG_I2C_TXCVR_REG(x)	(0x100 + (x))
+#define USBOTG_I2C_XCVR_DEVAD		0x118
+#define USBOTG_I2C_SEQ_OP_REG		0x119
+#define USBOTG_I2C_SEQ_RD_STARTAD	0x11a
+#define USBOTG_I2C_OP_CTRL_REG	     	0x11b
+#define USBOTG_I2C_SCLK_TO_SCK_HPER  	0x11e
+#define USBOTG_I2C_MASTER_INT_REG    	0x11f
+
+#define USBH_HOST_CTRL		0x80
+#define USBH_HOST_CTRL_HCRESET			(1 << 31)
+#define USBH_HOST_CTRL_SCHDOVR(x)		((x) << 16)
+#define USBH_HOST_CTRL_RMTWUEN			(1 << 4)
+#define USBH_HOST_CTRL_HCUSBSTE_RESET		(0 << 2)
+#define USBH_HOST_CTRL_HCUSBSTE_RESUME		(1 << 2)
+#define USBH_HOST_CTRL_HCUSBSTE_OPERATIONAL	(2 << 2)
+#define USBH_HOST_CTRL_HCUSBSTE_SUSPEND	(3 << 2)
+#define USBH_HOST_CTRL_CTLBLKSR_1		(0 << 0)
+#define USBH_HOST_CTRL_CTLBLKSR_2		(1 << 0)
+#define USBH_HOST_CTRL_CTLBLKSR_3		(2 << 0)
+#define USBH_HOST_CTRL_CTLBLKSR_4		(3 << 0)
+
+#define USBH_SYSISR		0x88
+#define USBH_SYSISR_PSCINT		(1 << 6)
+#define USBH_SYSISR_FMOFINT		(1 << 5)
+#define USBH_SYSISR_HERRINT		(1 << 4)
+#define USBH_SYSISR_RESDETINT		(1 << 3)
+#define USBH_SYSISR_SOFINT		(1 << 2)
+#define USBH_SYSISR_DONEINT		(1 << 1)
+#define USBH_SYSISR_SORINT		(1 << 0)
+
+#define USBH_SYSIEN	    	0x8c
+#define USBH_SYSIEN_PSCINT		(1 << 6)
+#define USBH_SYSIEN_FMOFINT		(1 << 5)
+#define USBH_SYSIEN_HERRINT		(1 << 4)
+#define USBH_SYSIEN_RESDETINT		(1 << 3)
+#define USBH_SYSIEN_SOFINT		(1 << 2)
+#define USBH_SYSIEN_DONEINT		(1 << 1)
+#define USBH_SYSIEN_SORINT		(1 << 0)
+
+#define USBH_XBUFSTAT	    	0x98
+#define USBH_YBUFSTAT	    	0x9c
+#define USBH_XYINTEN	    	0xa0
+#define USBH_XFILLSTAT	    	0xa8
+#define USBH_YFILLSTAT	    	0xac
+#define USBH_ETDENSET	    	0xc0
+#define USBH_ETDENCLR	    	0xc4
+#define USBH_IMMEDINT	    	0xcc
+#define USBH_ETDDONESTAT    	0xd0
+#define USBH_ETDDONEEN	    	0xd4
+#define USBH_FRMNUB	    	0xe0
+#define USBH_LSTHRESH	    	0xe4
+
+#define USBH_ROOTHUBA	    	0xe8
+#define USBH_ROOTHUBA_PWRTOGOOD_MASK	(0xff)
+#define USBH_ROOTHUBA_PWRTOGOOD_SHIFT	(24)
+#define USBH_ROOTHUBA_NOOVRCURP	(1 << 12)
+#define USBH_ROOTHUBA_OVRCURPM		(1 << 11)
+#define USBH_ROOTHUBA_DEVTYPE		(1 << 10)
+#define USBH_ROOTHUBA_PWRSWTMD		(1 << 9)
+#define USBH_ROOTHUBA_NOPWRSWT		(1 << 8)
+#define USBH_ROOTHUBA_NDNSTMPRT_MASK	(0xff)
+
+#define USBH_ROOTHUBB		0xec
+#define USBH_ROOTHUBB_PRTPWRCM(x)	(1 << ((x) + 16))
+#define USBH_ROOTHUBB_DEVREMOVE(x)	(1 << (x))
+
+#define USBH_ROOTSTAT		0xf0
+#define USBH_ROOTSTAT_CLRRMTWUE	(1 << 31)
+#define USBH_ROOTSTAT_OVRCURCHG	(1 << 17)
+#define USBH_ROOTSTAT_DEVCONWUE	(1 << 15)
+#define USBH_ROOTSTAT_OVRCURI		(1 << 1)
+#define USBH_ROOTSTAT_LOCPWRS		(1 << 0)
+
+#define USBH_PORTSTAT(x)	(0xf4 + ((x) * 4))
+#define USBH_PORTSTAT_PRTRSTSC		(1 << 20)
+#define USBH_PORTSTAT_OVRCURIC		(1 << 19)
+#define USBH_PORTSTAT_PRTSTATSC	(1 << 18)
+#define USBH_PORTSTAT_PRTENBLSC	(1 << 17)
+#define USBH_PORTSTAT_CONNECTSC	(1 << 16)
+#define USBH_PORTSTAT_LSDEVCON		(1 << 9)
+#define USBH_PORTSTAT_PRTPWRST		(1 << 8)
+#define USBH_PORTSTAT_PRTRSTST		(1 << 4)
+#define USBH_PORTSTAT_PRTOVRCURI	(1 << 3)
+#define USBH_PORTSTAT_PRTSUSPST	(1 << 2)
+#define USBH_PORTSTAT_PRTENABST	(1 << 1)
+#define USBH_PORTSTAT_CURCONST		(1 << 0)
+
+#define USB_DMAREV		0x800
+#define USB_DMAINTSTAT	    	0x804
+#define USB_DMAINTSTAT_EPERR		(1 << 1)
+#define USB_DMAINTSTAT_ETDERR		(1 << 0)
+
+#define USB_DMAINTEN	    	0x808
+#define USB_DMAINTEN_EPERRINTEN	(1 << 1)
+#define USB_DMAINTEN_ETDERRINTEN	(1 << 0)
+
+#define USB_ETDDMAERSTAT    	0x80c
+#define USB_EPDMAERSTAT	    	0x810
+#define USB_ETDDMAEN	    	0x820
+#define USB_EPDMAEN	    	0x824
+#define USB_ETDDMAXTEN	    	0x828
+#define USB_EPDMAXTEN	    	0x82c
+#define USB_ETDDMAENXYT	    	0x830
+#define USB_EPDMAENXYT	    	0x834
+#define USB_ETDDMABST4EN    	0x838
+#define USB_EPDMABST4EN	    	0x83c
+
+#define USB_MISCCONTROL	    	0x840
+#define USB_MISCCONTROL_ISOPREVFRM	(1 << 3)
+#define USB_MISCCONTROL_SKPRTRY	(1 << 2)
+#define USB_MISCCONTROL_ARBMODE	(1 << 1)
+#define USB_MISCCONTROL_FILTCC		(1 << 0)
+
+#define USB_ETDDMACHANLCLR  	0x848
+#define USB_EPDMACHANLCLR   	0x84c
+#define USB_ETDSMSA(x)	    	(0x900 + ((x) * 4))
+#define USB_EPSMSA(x)	    	(0x980 + ((x) * 4))
+#define USB_ETDDMABUFPTR(x) 	(0xa00 + ((x) * 4))
+#define USB_EPDMABUFPTR(x)  	(0xa80 + ((x) * 4))
+
+#define USB_ETD_DWORD(x, w)	(0x200 + ((x) * 16) + ((w) * 4))
+#define DW0_ADDRESS	0
+#define	DW0_ENDPNT	7
+#define	DW0_DIRECT	11
+#define	DW0_SPEED	13
+#define DW0_FORMAT	14
+#define DW0_MAXPKTSIZ	16
+#define DW0_HALTED	27
+#define	DW0_TOGCRY	28
+#define	DW0_SNDNAK	30
+
+#define DW1_XBUFSRTAD	0
+#define DW1_YBUFSRTAD	16
+
+#define DW2_RTRYDELAY	0
+#define DW2_POLINTERV	0
+#define DW2_STARTFRM	0
+#define DW2_RELPOLPOS	8
+#define DW2_DIRPID	16
+#define	DW2_BUFROUND	18
+#define DW2_DELAYINT	19
+#define DW2_DATATOG	22
+#define DW2_ERRORCNT	24
+#define	DW2_COMPCODE	28
+
+#define DW3_TOTBYECNT	0
+#define DW3_PKTLEN0	0
+#define DW3_COMPCODE0	12
+#define DW3_PKTLEN1	16
+#define DW3_BUFSIZE	21
+#define DW3_COMPCODE1	28
+
+#define USBCTRL		    	0x600
+#define USBCTRL_I2C_WU_INT_STAT	(1 << 27)
+#define USBCTRL_OTG_WU_INT_STAT	(1 << 26)
+#define USBCTRL_HOST_WU_INT_STAT	(1 << 25)
+#define USBCTRL_FNT_WU_INT_STAT	(1 << 24)
+#define USBCTRL_I2C_WU_INT_EN		(1 << 19)
+#define USBCTRL_OTG_WU_INT_EN		(1 << 18)
+#define USBCTRL_HOST_WU_INT_EN		(1 << 17)
+#define USBCTRL_FNT_WU_INT_EN		(1 << 16)
+#define USBCTRL_OTC_RCV_RXDP		(1 << 13)
+#define USBCTRL_HOST1_BYP_TLL		(1 << 12)
+#define USBCTRL_OTG_BYP_VAL(x)		((x) << 10)
+#define USBCTRL_HOST1_BYP_VAL(x)	((x) << 8)
+#define USBCTRL_OTG_PWR_MASK		(1 << 6)
+#define USBCTRL_HOST1_PWR_MASK		(1 << 5)
+#define USBCTRL_HOST2_PWR_MASK		(1 << 4)
+#define USBCTRL_USB_BYP			(1 << 2)
+#define USBCTRL_HOST1_TXEN_OE		(1 << 1)
+
+
+/* Values in TD blocks */
+#define TD_DIR_SETUP	    0
+#define TD_DIR_OUT	    1
+#define TD_DIR_IN	    2
+#define TD_FORMAT_CONTROL   0
+#define TD_FORMAT_ISO	    1
+#define TD_FORMAT_BULK	    2
+#define TD_FORMAT_INT	    3
+#define TD_TOGGLE_CARRY	    0
+#define TD_TOGGLE_DATA0	    2
+#define TD_TOGGLE_DATA1	    3
+
+/* control transfer states */
+#define US_CTRL_SETUP	2
+#define US_CTRL_DATA	1
+#define US_CTRL_ACK	0
+
+/* bulk transfer main state and 0-length packet */
+#define US_BULK		1
+#define US_BULK0	0
+
+/*ETD format description*/
+#define IMX_FMT_CTRL   0x0
+#define IMX_FMT_ISO    0x1
+#define IMX_FMT_BULK   0x2
+#define IMX_FMT_INT    0x3
+
+static char fmt_urb_to_etd[4] = {
+/*PIPE_ISOCHRONOUS*/ IMX_FMT_ISO,
+/*PIPE_INTERRUPT*/ IMX_FMT_INT,
+/*PIPE_CONTROL*/ IMX_FMT_CTRL,
+/*PIPE_BULK*/ IMX_FMT_BULK
+};
+
+/* condition (error) CC codes and mapping (OHCI like) */
+
+#define TD_CC_NOERROR		0x00
+#define TD_CC_CRC		0x01
+#define TD_CC_BITSTUFFING	0x02
+#define TD_CC_DATATOGGLEM	0x03
+#define TD_CC_STALL		0x04
+#define TD_DEVNOTRESP		0x05
+#define TD_PIDCHECKFAIL		0x06
+/*#define TD_UNEXPECTEDPID	0x07 - reserved, not active on MX2*/
+#define TD_DATAOVERRUN		0x08
+#define TD_DATAUNDERRUN		0x09
+#define TD_BUFFEROVERRUN	0x0C
+#define TD_BUFFERUNDERRUN	0x0D
+#define	TD_SCHEDULEOVERRUN	0x0E
+#define TD_NOTACCESSED		0x0F
+
+static const int cc_to_error[16] = {
+	/* No  Error  */ 0,
+	/* CRC Error  */ -EILSEQ,
+	/* Bit Stuff  */ -EPROTO,
+	/* Data Togg  */ -EILSEQ,
+	/* Stall      */ -EPIPE,
+	/* DevNotResp */ -ETIMEDOUT,
+	/* PIDCheck   */ -EPROTO,
+	/* UnExpPID   */ -EPROTO,
+	/* DataOver   */ -EOVERFLOW,
+	/* DataUnder  */ -EREMOTEIO,
+	/* (for hw)   */ -EIO,
+	/* (for hw)   */ -EIO,
+	/* BufferOver */ -ECOMM,
+	/* BuffUnder  */ -ENOSR,
+	/* (for HCD)  */ -ENOSPC,
+	/* (for HCD)  */ -EALREADY
+};
+
+/* HCD data associated with a usb core URB */
+struct urb_priv {
+	struct urb *urb;
+	struct usb_host_endpoint *ep;
+	int active;
+	int state;
+	struct td *isoc_td;
+	int isoc_remaining;
+	int isoc_status;
+};
+
+/* HCD data associated with a usb core endpoint */
+struct ep_priv {
+	struct usb_host_endpoint *ep;
+	struct list_head td_list;
+	struct list_head queue;
+	int etd[NUM_ISO_ETDS];
+	int waiting_etd;
+};
+
+/* isoc packet */
+struct td {
+	struct list_head list;
+	struct urb *urb;
+	struct usb_host_endpoint *ep;
+	dma_addr_t data;
+	unsigned long buf_addr;
+	int len;
+	int frame;
+	int isoc_index;
+};
+
+/* HCD data associated with a hardware ETD */
+struct etd_priv {
+	struct usb_host_endpoint *ep;
+	struct urb *urb;
+	struct td *td;
+	struct list_head queue;
+	dma_addr_t dma_handle;
+	int alloc;
+	int len;
+	int dmem_size;
+	int dmem_offset;
+	int active_count;
+#ifdef DEBUG
+	int activated_frame;
+	int disactivated_frame;
+	int last_int_frame;
+	int last_req_frame;
+	u32 submitted_dwords[4];
+#endif
+};
+
+/* Hardware data memory info */
+struct imx21_dmem_area {
+	struct usb_host_endpoint *ep;
+	unsigned int offset;
+	unsigned int size;
+	struct list_head list;
+};
+
+#ifdef DEBUG
+struct debug_usage_stats {
+	unsigned int value;
+	unsigned int maximum;
+};
+
+struct debug_stats {
+	unsigned long submitted;
+	unsigned long completed_ok;
+	unsigned long completed_failed;
+	unsigned long unlinked;
+	unsigned long queue_etd;
+	unsigned long queue_dmem;
+};
+
+struct debug_isoc_trace {
+	int schedule_frame;
+	int submit_frame;
+	int request_len;
+	int done_frame;
+	int done_len;
+	int cc;
+	struct td *td;
+};
+#endif
+
+/* HCD data structure */
+struct imx21 {
+	spinlock_t lock;
+	struct device *dev;
+	struct mx21_usbh_platform_data *pdata;
+	struct list_head dmem_list;
+	struct list_head queue_for_etd; /* eps queued due to etd shortage */
+	struct list_head queue_for_dmem; /* etds queued due to dmem shortage */
+	struct etd_priv etd[USB_NUM_ETD];
+	struct clk *clk;
+	void __iomem *regs;
+#ifdef DEBUG
+	struct dentry *debug_root;
+	struct debug_stats nonisoc_stats;
+	struct debug_stats isoc_stats;
+	struct debug_usage_stats etd_usage;
+	struct debug_usage_stats dmem_usage;
+	struct debug_isoc_trace isoc_trace[20];
+	struct debug_isoc_trace isoc_trace_failed[20];
+	unsigned long debug_unblocks;
+	int isoc_trace_index;
+	int isoc_trace_index_failed;
+#endif
+};
+
+#endif
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 42971657fde2..217fb5170200 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -1257,7 +1257,7 @@ static int isp1362_urb_enqueue(struct usb_hcd *hcd,
 
 	/* avoid all allocations within spinlocks: request or endpoint */
 	if (!hep->hcpriv) {
-		ep = kcalloc(1, sizeof *ep, mem_flags);
+		ep = kzalloc(sizeof *ep, mem_flags);
 		if (!ep)
 			return -ENOMEM;
 	}
@@ -2719,24 +2719,11 @@ static int __init isp1362_probe(struct platform_device *pdev)
 	}
 	irq = irq_res->start;
 
-#ifdef CONFIG_USB_HCD_DMA
-	if (pdev->dev.dma_mask) {
-		struct resource *dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-
-		if (!dma_res) {
-			retval = -ENODEV;
-			goto err1;
-		}
-		isp1362_hcd->data_dma = dma_res->start;
-		isp1362_hcd->max_dma_size = resource_len(dma_res);
-	}
-#else
 	if (pdev->dev.dma_mask) {
 		DBG(1, "won't do DMA");
 		retval = -ENODEV;
 		goto err1;
 	}
-#endif
 
 	if (!request_mem_region(addr->start, resource_len(addr), hcd_name)) {
 		retval = -EBUSY;
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 27b8f7cb4471..9f01293600b0 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -17,7 +17,9 @@
 #include <linux/debugfs.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
+#include <linux/mm.h>
 #include <asm/unaligned.h>
+#include <asm/cacheflush.h>
 
 #include "../core/hcd.h"
 #include "isp1760-hcd.h"
@@ -904,6 +906,14 @@ __acquires(priv->lock)
 			status = 0;
 	}
 
+	if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
+		void *ptr;
+		for (ptr = urb->transfer_buffer;
+		     ptr < urb->transfer_buffer + urb->transfer_buffer_length;
+		     ptr += PAGE_SIZE)
+			flush_dcache_page(virt_to_page(ptr));
+	}
+
 	/* complete() can reenter this HCD */
 	usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb);
 	spin_unlock(&priv->lock);
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 1c9f977a5c9c..4293cfd28d61 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -109,7 +109,7 @@ static int of_isp1760_remove(struct of_device *dev)
 	return 0;
 }
 
-static struct of_device_id of_isp1760_match[] = {
+static const struct of_device_id of_isp1760_match[] = {
 	{
 		.compatible = "nxp,usb-isp1760",
 	},
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
new file mode 100644
index 000000000000..4aa08d36d077
--- /dev/null
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -0,0 +1,456 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * TI DA8xx (OMAP-L1x) Bus Glue
+ *
+ * Derived from: ohci-omap.c and ohci-s3c2410.c
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <mach/da8xx.h>
+#include <mach/usb.h>
+
+#ifndef CONFIG_ARCH_DAVINCI_DA8XX
+#error "This file is DA8xx bus glue.  Define CONFIG_ARCH_DAVINCI_DA8XX."
+#endif
+
+#define CFGCHIP2	DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)
+
+static struct clk *usb11_clk;
+static struct clk *usb20_clk;
+
+/* Over-current indicator change bitmask */
+static volatile u16 ocic_mask;
+
+static void ohci_da8xx_clock(int on)
+{
+	u32 cfgchip2;
+
+	cfgchip2 = __raw_readl(CFGCHIP2);
+	if (on) {
+		clk_enable(usb11_clk);
+
+		/*
+		 * If USB 1.1 reference clock is sourced from USB 2.0 PHY, we
+		 * need to enable the USB 2.0 module clocking, start its PHY,
+		 * and not allow it to stop the clock during USB 2.0 suspend.
+		 */
+		if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) {
+			clk_enable(usb20_clk);
+
+			cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN);
+			cfgchip2 |= CFGCHIP2_PHY_PLLON;
+			__raw_writel(cfgchip2, CFGCHIP2);
+
+			pr_info("Waiting for USB PHY clock good...\n");
+			while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD))
+				cpu_relax();
+		}
+
+		/* Enable USB 1.1 PHY */
+		cfgchip2 |= CFGCHIP2_USB1SUSPENDM;
+	} else {
+		clk_disable(usb11_clk);
+		if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX))
+			clk_disable(usb20_clk);
+
+		/* Disable USB 1.1 PHY */
+		cfgchip2 &= ~CFGCHIP2_USB1SUSPENDM;
+	}
+	__raw_writel(cfgchip2, CFGCHIP2);
+}
+
+/*
+ * Handle the port over-current indicator change.
+ */
+static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
+				    unsigned port)
+{
+	ocic_mask |= 1 << port;
+
+	/* Once over-current is detected, the port needs to be powered down */
+	if (hub->get_oci(port) > 0)
+		hub->set_power(port, 0);
+}
+
+static int ohci_da8xx_init(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev->platform_data;
+	struct ohci_hcd	*ohci		= hcd_to_ohci(hcd);
+	int result;
+	u32 rh_a;
+
+	dev_dbg(dev, "starting USB controller\n");
+
+	ohci_da8xx_clock(1);
+
+	/*
+	 * DA8xx only have 1 port connected to the pins but the HC root hub
+	 * register A reports 2 ports, thus we'll have to override it...
+	 */
+	ohci->num_ports = 1;
+
+	result = ohci_init(ohci);
+	if (result < 0)
+		return result;
+
+	/*
+	 * Since we're providing a board-specific root hub port power control
+	 * and over-current reporting, we have to override the HC root hub A
+	 * register's default value, so that ohci_hub_control() could return
+	 * the correct hub descriptor...
+	 */
+	rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
+	if (hub->set_power) {
+		rh_a &= ~RH_A_NPS;
+		rh_a |=  RH_A_PSM;
+	}
+	if (hub->get_oci) {
+		rh_a &= ~RH_A_NOCP;
+		rh_a |=  RH_A_OCPM;
+	}
+	rh_a &= ~RH_A_POTPGT;
+	rh_a |= hub->potpgt << 24;
+	ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
+
+	return result;
+}
+
+static void ohci_da8xx_stop(struct usb_hcd *hcd)
+{
+	ohci_stop(hcd);
+	ohci_da8xx_clock(0);
+}
+
+static int ohci_da8xx_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci		= hcd_to_ohci(hcd);
+	int result;
+
+	result = ohci_run(ohci);
+	if (result < 0)
+		ohci_da8xx_stop(hcd);
+
+	return result;
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	int length		= ohci_hub_status_data(hcd, buf);
+
+	/* See if we have OCIC bit set on port 1 */
+	if (ocic_mask & (1 << 1)) {
+		dev_dbg(hcd->self.controller, "over-current indicator change "
+			"on port 1\n");
+
+		if (!length)
+			length = 1;
+
+		buf[0] |= 1 << 1;
+	}
+	return length;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+				  u16 wIndex, char *buf, u16 wLength)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev->platform_data;
+	int temp;
+
+	switch (typeReq) {
+	case GetPortStatus:
+		/* Check the port number */
+		if (wIndex != 1)
+			break;
+
+		dev_dbg(dev, "GetPortStatus(%u)\n", wIndex);
+
+		temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
+
+		/* The port power status (PPS) bit defaults to 1 */
+		if (hub->get_power && hub->get_power(wIndex) == 0)
+			temp &= ~RH_PS_PPS;
+
+		/* The port over-current indicator (POCI) bit is always 0 */
+		if (hub->get_oci && hub->get_oci(wIndex) > 0)
+			temp |=  RH_PS_POCI;
+
+		/* The over-current indicator change (OCIC) bit is 0 too */
+		if (ocic_mask & (1 << wIndex))
+			temp |=  RH_PS_OCIC;
+
+		put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
+		return 0;
+	case SetPortFeature:
+		temp = 1;
+		goto check_port;
+	case ClearPortFeature:
+		temp = 0;
+
+check_port:
+		/* Check the port number */
+		if (wIndex != 1)
+			break;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(dev, "%sPortFeature(%u): %s\n",
+				temp ? "Set" : "Clear", wIndex, "POWER");
+
+			if (!hub->set_power)
+				return -EPIPE;
+
+			return hub->set_power(wIndex, temp) ? -EPIPE : 0;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(dev, "%sPortFeature(%u): %s\n",
+				temp ? "Set" : "Clear", wIndex,
+				"C_OVER_CURRENT");
+
+			if (temp)
+				ocic_mask |= 1 << wIndex;
+			else
+				ocic_mask &= ~(1 << wIndex);
+			return 0;
+		}
+	}
+
+	return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+}
+
+static const struct hc_driver ohci_da8xx_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "DA8xx OHCI",
+	.hcd_priv_size		= sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ohci_irq,
+	.flags			= HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= ohci_da8xx_init,
+	.start			= ohci_da8xx_start,
+	.stop			= ohci_da8xx_stop,
+	.shutdown		= ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ohci_da8xx_hub_status_data,
+	.hub_control		= ohci_da8xx_hub_control,
+
+#ifdef	CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+
+
+/**
+ * usb_hcd_da8xx_probe - initialize DA8xx-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int usb_hcd_da8xx_probe(const struct hc_driver *driver,
+			       struct platform_device *pdev)
+{
+	struct da8xx_ohci_root_hub *hub	= pdev->dev.platform_data;
+	struct usb_hcd	*hcd;
+	struct resource *mem;
+	int error, irq;
+
+	if (hub == NULL)
+		return -ENODEV;
+
+	usb11_clk = clk_get(&pdev->dev, "usb11");
+	if (IS_ERR(usb11_clk))
+		return PTR_ERR(usb11_clk);
+
+	usb20_clk = clk_get(&pdev->dev, "usb20");
+	if (IS_ERR(usb20_clk)) {
+		error = PTR_ERR(usb20_clk);
+		goto err0;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		error = -ENOMEM;
+		goto err1;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		error = -ENODEV;
+		goto err2;
+	}
+	hcd->rsrc_start = mem->start;
+	hcd->rsrc_len = mem->end - mem->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		dev_dbg(&pdev->dev, "request_mem_region failed\n");
+		error = -EBUSY;
+		goto err2;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		error = -ENOMEM;
+		goto err3;
+	}
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		error = -ENODEV;
+		goto err4;
+	}
+	error = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	if (error)
+		goto err4;
+
+	if (hub->ocic_notify) {
+		error = hub->ocic_notify(ohci_da8xx_ocic_handler);
+		if (!error)
+			return 0;
+	}
+
+	usb_remove_hcd(hcd);
+err4:
+	iounmap(hcd->regs);
+err3:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err2:
+	usb_put_hcd(hcd);
+err1:
+	clk_put(usb20_clk);
+err0:
+	clk_put(usb11_clk);
+	return error;
+}
+
+/**
+ * usb_hcd_da8xx_remove - shutdown processing for DA8xx-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_da8xx_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ */
+static inline void
+usb_hcd_da8xx_remove(struct usb_hcd *hcd, struct platform_device *pdev)
+{
+	struct da8xx_ohci_root_hub *hub	= pdev->dev.platform_data;
+
+	hub->ocic_notify(NULL);
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	clk_put(usb20_clk);
+	clk_put(usb11_clk);
+}
+
+static int ohci_hcd_da8xx_drv_probe(struct platform_device *dev)
+{
+	return usb_hcd_da8xx_probe(&ohci_da8xx_hc_driver, dev);
+}
+
+static int ohci_hcd_da8xx_drv_remove(struct platform_device *dev)
+{
+	struct usb_hcd	*hcd = platform_get_drvdata(dev);
+
+	usb_hcd_da8xx_remove(hcd, dev);
+	platform_set_drvdata(dev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_da8xx_suspend(struct platform_device *dev, pm_message_t message)
+{
+	struct usb_hcd	*hcd	= platform_get_drvdata(dev);
+	struct ohci_hcd	*ohci	= hcd_to_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ohci_da8xx_clock(0);
+	hcd->state = HC_STATE_SUSPENDED;
+	dev->dev.power.power_state = PMSG_SUSPEND;
+	return 0;
+}
+
+static int ohci_da8xx_resume(struct platform_device *dev)
+{
+	struct usb_hcd	*hcd	= platform_get_drvdata(dev);
+	struct ohci_hcd	*ohci	= hcd_to_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ohci_da8xx_clock(1);
+	dev->dev.power.power_state = PMSG_ON;
+	usb_hcd_resume_root_hub(hcd);
+	return 0;
+}
+#endif
+
+/*
+ * Driver definition to register with platform structure.
+ */
+static struct platform_driver ohci_hcd_da8xx_driver = {
+	.probe		= ohci_hcd_da8xx_drv_probe,
+	.remove		= ohci_hcd_da8xx_drv_remove,
+	.shutdown 	= usb_hcd_platform_shutdown,
+#ifdef	CONFIG_PM
+	.suspend	= ohci_da8xx_suspend,
+	.resume		= ohci_da8xx_resume,
+#endif
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "ohci",
+	},
+};
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 811f5dfdc582..8ad2441b0284 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -53,13 +53,13 @@ urb_print(struct urb * urb, char * str, int small, int status)
 		int i, len;
 
 		if (usb_pipecontrol (pipe)) {
-			printk (KERN_DEBUG __FILE__ ": setup(8):");
+			printk (KERN_DEBUG "%s: setup(8):", __FILE__);
 			for (i = 0; i < 8 ; i++)
 				printk (" %02x", ((__u8 *) urb->setup_packet) [i]);
 			printk ("\n");
 		}
 		if (urb->transfer_buffer_length > 0 && urb->transfer_buffer) {
-			printk (KERN_DEBUG __FILE__ ": data(%d/%d):",
+			printk (KERN_DEBUG "%s: data(%d/%d):", __FILE__,
 				urb->actual_length,
 				urb->transfer_buffer_length);
 			len = usb_pipeout (pipe)?
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 24eb74781919..afe59be23645 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1051,6 +1051,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		usb_hcd_pnx4008_driver
 #endif
 
+#ifdef CONFIG_ARCH_DAVINCI_DA8XX
+#include "ohci-da8xx.c"
+#define PLATFORM_DRIVER		ohci_hcd_da8xx_driver
+#endif
+
 #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
     defined(CONFIG_CPU_SUBTYPE_SH7763) || \
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index de42283149c7..18d39f0463ee 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -28,8 +28,8 @@ extern int usb_disabled(void);
 
 static void lh7a404_start_hc(struct platform_device *dev)
 {
-	printk(KERN_DEBUG __FILE__
-	       ": starting LH7A404 OHCI USB Controller\n");
+	printk(KERN_DEBUG "%s: starting LH7A404 OHCI USB Controller\n",
+	       __FILE__);
 
 	/*
 	 * Now, carefully enable the USB clock, and take
@@ -39,14 +39,13 @@ static void lh7a404_start_hc(struct platform_device *dev)
 	udelay(1000);
 	USBH_CMDSTATUS = OHCI_HCR;
 
-	printk(KERN_DEBUG __FILE__
-		   ": Clock to USB host has been enabled \n");
+	printk(KERN_DEBUG "%s: Clock to USB host has been enabled \n", __FILE__);
 }
 
 static void lh7a404_stop_hc(struct platform_device *dev)
 {
-	printk(KERN_DEBUG __FILE__
-	       ": stopping LH7A404 OHCI USB Controller\n");
+	printk(KERN_DEBUG "%s: stopping LH7A404 OHCI USB Controller\n",
+	       __FILE__);
 
 	CSC_PWRCNT &= ~CSC_PWRCNT_USBH_EN; /* Disable clock */
 }
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 2769326da42e..cd74bbdd007c 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -327,7 +327,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
 	}
 	i2c_adap = i2c_get_adapter(2);
 	memset(&i2c_info, 0, sizeof(struct i2c_board_info));
-	strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
+	strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
 	isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
 						   normal_i2c);
 	i2c_put_adapter(i2c_adap);
@@ -411,7 +411,7 @@ out3:
 out2:
 	clk_put(usb_clk);
 out1:
-	i2c_unregister_client(isp1301_i2c_client);
+	i2c_unregister_device(isp1301_i2c_client);
 	isp1301_i2c_client = NULL;
 out_i2c_driver:
 	i2c_del_driver(&isp1301_driver);
@@ -430,7 +430,7 @@ static int usb_hcd_pnx4008_remove(struct platform_device *pdev)
 	pnx4008_unset_usb_bits();
 	clk_disable(usb_clk);
 	clk_put(usb_clk);
-	i2c_unregister_client(isp1301_i2c_client);
+	i2c_unregister_device(isp1301_i2c_client);
 	isp1301_i2c_client = NULL;
 	i2c_del_driver(&isp1301_driver);
 
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 68a301710297..103263c230cf 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -114,21 +114,21 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
 	hcd->rsrc_len = res.end - res.start + 1;
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-		printk(KERN_ERR __FILE__ ": request_mem_region failed\n");
+		printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__);
 		rv = -EBUSY;
 		goto err_rmr;
 	}
 
 	irq = irq_of_parse_and_map(dn, 0);
 	if (irq == NO_IRQ) {
-		printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n");
+		printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
 		rv = -EBUSY;
 		goto err_irq;
 	}
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (!hcd->regs) {
-		printk(KERN_ERR __FILE__ ": ioremap failed\n");
+		printk(KERN_ERR "%s: ioremap failed\n", __FILE__);
 		rv = -ENOMEM;
 		goto err_ioremap;
 	}
@@ -169,7 +169,7 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
 			} else
 				release_mem_region(res.start, 0x4);
 		} else
-		    pr_debug(__FILE__ ": cannot get ehci offset from fdt\n");
+			pr_debug("%s: cannot get ehci offset from fdt\n", __FILE__);
 	}
 
 	iounmap(hcd->regs);
@@ -212,7 +212,7 @@ static int ohci_hcd_ppc_of_shutdown(struct of_device *op)
 }
 
 
-static struct of_device_id ohci_hcd_ppc_of_match[] = {
+static const struct of_device_id ohci_hcd_ppc_of_match[] = {
 #ifdef CONFIG_USB_OHCI_HCD_PPC_OF_BE
 	{
 		.name = "usb",
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index cd3398b675b2..89e670e38c10 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -41,14 +41,14 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
 
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!res) {
-		pr_debug(__FILE__ ": no irq\n");
+		pr_debug("%s: no irq\n", __FILE__);
 		return -ENODEV;
 	}
 	irq = res->start;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
-		pr_debug(__FILE__ ": no reg addr\n");
+		pr_debug("%s: no reg addr\n", __FILE__);
 		return -ENODEV;
 	}
 
@@ -59,14 +59,14 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
 	hcd->rsrc_len = res->end - res->start + 1;
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-		pr_debug(__FILE__ ": request_mem_region failed\n");
+		pr_debug("%s: request_mem_region failed\n", __FILE__);
 		retval = -EBUSY;
 		goto err1;
 	}
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (!hcd->regs) {
-		pr_debug(__FILE__ ": ioremap failed\n");
+		pr_debug("%s: ioremap failed\n", __FILE__);
 		retval = -ENOMEM;
 		goto err2;
 	}
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index e4bbe8e188e4..d8eb3bdafabb 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -31,8 +31,8 @@ static void sa1111_start_hc(struct sa1111_dev *dev)
 {
 	unsigned int usb_rst = 0;
 
-	printk(KERN_DEBUG __FILE__
-	       ": starting SA-1111 OHCI USB Controller\n");
+	printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n",
+	       __FILE__);
 
 #ifdef CONFIG_SA1100_BADGE4
 	if (machine_is_badge4()) {
@@ -65,8 +65,8 @@ static void sa1111_start_hc(struct sa1111_dev *dev)
 static void sa1111_stop_hc(struct sa1111_dev *dev)
 {
 	unsigned int usb_rst;
-	printk(KERN_DEBUG __FILE__
-	       ": stopping SA-1111 OHCI USB Controller\n");
+	printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n",
+	       __FILE__);
 
 	/*
 	 * Put the USB host controller into reset.
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 5b22a4d1c9e4..e11cc3aa4b82 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -51,6 +51,7 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/byteorder.h>
+#include <asm/unaligned.h>
 
 #include "../core/hcd.h"
 #include "sl811.h"
@@ -1272,12 +1273,12 @@ sl811h_hub_control(
 		sl811h_hub_descriptor(sl811, (struct usb_hub_descriptor *) buf);
 		break;
 	case GetHubStatus:
-		*(__le32 *) buf = cpu_to_le32(0);
+		put_unaligned_le32(0, buf);
 		break;
 	case GetPortStatus:
 		if (wIndex != 1)
 			goto error;
-		*(__le32 *) buf = cpu_to_le32(sl811->port1);
+		put_unaligned_le32(sl811->port1, buf);
 
 #ifndef	VERBOSE
 	if (*(u16*)(buf+2))	/* only if wPortChange is interesting */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 99cd00fd3514..09197067fe6b 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -735,6 +735,7 @@ static void uhci_stop(struct usb_hcd *hcd)
 		uhci_hc_died(uhci);
 	uhci_scan_schedule(uhci);
 	spin_unlock_irq(&uhci->lock);
+	synchronize_irq(hcd->irq);
 
 	del_timer_sync(&uhci->fsbr_timer);
 	release_uhci(uhci);
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 33128d52f212..105fa8b025bb 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -406,6 +406,25 @@ static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma)
 	}
 }
 
+char *xhci_get_slot_state(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *ctx)
+{
+	struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+
+	switch (GET_SLOT_STATE(slot_ctx->dev_state)) {
+	case 0:
+		return "enabled/disabled";
+	case 1:
+		return "default";
+	case 2:
+		return "addressed";
+	case 3:
+		return "configured";
+	default:
+		return "reserved";
+	}
+}
+
 void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
 {
 	/* Fields are 32 bits wide, DMA addresses are in bytes */
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index ecc131c3fe33..78c4edac1db1 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -101,12 +101,15 @@ static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset)
 
 	next = readl(base + ext_offset);
 
-	if (ext_offset == XHCI_HCC_PARAMS_OFFSET)
+	if (ext_offset == XHCI_HCC_PARAMS_OFFSET) {
 		/* Find the first extended capability */
 		next = XHCI_HCC_EXT_CAPS(next);
-	else
+		ext_offset = 0;
+	} else {
 		/* Find the next extended capability */
 		next = XHCI_EXT_CAPS_NEXT(next);
+	}
+
 	if (!next)
 		return 0;
 	/*
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index 5e92c72df642..4cb69e0af834 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -1007,7 +1007,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	 * for usb_set_interface() and usb_set_configuration() claim).
 	 */
 	if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id],
-				udev, ep, GFP_KERNEL) < 0) {
+				udev, ep, GFP_NOIO) < 0) {
 		dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
 				__func__, ep->desc.bEndpointAddress);
 		return -ENOMEM;
@@ -1181,6 +1181,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 		ret = xhci_queue_evaluate_context(xhci, in_ctx->dma,
 				udev->slot_id);
 	if (ret < 0) {
+		if (command)
+			list_del(&command->cmd_list);
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
 		return -ENOMEM;
@@ -1264,30 +1266,13 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	xhci_zero_in_ctx(xhci, virt_dev);
 	/* Install new rings and free or cache any old rings */
 	for (i = 1; i < 31; ++i) {
-		int rings_cached;
-
 		if (!virt_dev->eps[i].new_ring)
 			continue;
 		/* Only cache or free the old ring if it exists.
 		 * It may not if this is the first add of an endpoint.
 		 */
 		if (virt_dev->eps[i].ring) {
-			rings_cached = virt_dev->num_rings_cached;
-			if (rings_cached < XHCI_MAX_RINGS_CACHED) {
-				virt_dev->num_rings_cached++;
-				rings_cached = virt_dev->num_rings_cached;
-				virt_dev->ring_cache[rings_cached] =
-					virt_dev->eps[i].ring;
-				xhci_dbg(xhci, "Cached old ring, "
-						"%d ring%s cached\n",
-						rings_cached,
-						(rings_cached > 1) ? "s" : "");
-			} else {
-				xhci_ring_free(xhci, virt_dev->eps[i].ring);
-				xhci_dbg(xhci, "Ring cache full (%d rings), "
-						"freeing ring\n",
-						virt_dev->num_rings_cached);
-			}
+			xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
 		}
 		virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
 		virt_dev->eps[i].new_ring = NULL;
@@ -1458,6 +1443,131 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
 }
 
 /*
+ * This submits a Reset Device Command, which will set the device state to 0,
+ * set the device address to 0, and disable all the endpoints except the default
+ * control endpoint.  The USB core should come back and call
+ * xhci_address_device(), and then re-set up the configuration.  If this is
+ * called because of a usb_reset_and_verify_device(), then the old alternate
+ * settings will be re-installed through the normal bandwidth allocation
+ * functions.
+ *
+ * Wait for the Reset Device command to finish.  Remove all structures
+ * associated with the endpoints that were disabled.  Clear the input device
+ * structure?  Cache the rings?  Reset the control endpoint 0 max packet size?
+ */
+int xhci_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	int ret, i;
+	unsigned long flags;
+	struct xhci_hcd *xhci;
+	unsigned int slot_id;
+	struct xhci_virt_device *virt_dev;
+	struct xhci_command *reset_device_cmd;
+	int timeleft;
+	int last_freed_endpoint;
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
+	if (ret <= 0)
+		return ret;
+	xhci = hcd_to_xhci(hcd);
+	slot_id = udev->slot_id;
+	virt_dev = xhci->devs[slot_id];
+	if (!virt_dev) {
+		xhci_dbg(xhci, "%s called with invalid slot ID %u\n",
+				__func__, slot_id);
+		return -EINVAL;
+	}
+
+	xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
+	/* Allocate the command structure that holds the struct completion.
+	 * Assume we're in process context, since the normal device reset
+	 * process has to wait for the device anyway.  Storage devices are
+	 * reset as part of error handling, so use GFP_NOIO instead of
+	 * GFP_KERNEL.
+	 */
+	reset_device_cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO);
+	if (!reset_device_cmd) {
+		xhci_dbg(xhci, "Couldn't allocate command structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Attempt to submit the Reset Device command to the command ring */
+	spin_lock_irqsave(&xhci->lock, flags);
+	reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+	list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
+	ret = xhci_queue_reset_device(xhci, slot_id);
+	if (ret) {
+		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+		list_del(&reset_device_cmd->cmd_list);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		goto command_cleanup;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Wait for the Reset Device command to finish */
+	timeleft = wait_for_completion_interruptible_timeout(
+			reset_device_cmd->completion,
+			USB_CTRL_SET_TIMEOUT);
+	if (timeleft <= 0) {
+		xhci_warn(xhci, "%s while waiting for reset device command\n",
+				timeleft == 0 ? "Timeout" : "Signal");
+		spin_lock_irqsave(&xhci->lock, flags);
+		/* The timeout might have raced with the event ring handler, so
+		 * only delete from the list if the item isn't poisoned.
+		 */
+		if (reset_device_cmd->cmd_list.next != LIST_POISON1)
+			list_del(&reset_device_cmd->cmd_list);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		ret = -ETIME;
+		goto command_cleanup;
+	}
+
+	/* The Reset Device command can't fail, according to the 0.95/0.96 spec,
+	 * unless we tried to reset a slot ID that wasn't enabled,
+	 * or the device wasn't in the addressed or configured state.
+	 */
+	ret = reset_device_cmd->status;
+	switch (ret) {
+	case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */
+	case COMP_CTX_STATE: /* 0.96 completion code for same thing */
+		xhci_info(xhci, "Can't reset device (slot ID %u) in %s state\n",
+				slot_id,
+				xhci_get_slot_state(xhci, virt_dev->out_ctx));
+		xhci_info(xhci, "Not freeing device rings.\n");
+		/* Don't treat this as an error.  May change my mind later. */
+		ret = 0;
+		goto command_cleanup;
+	case COMP_SUCCESS:
+		xhci_dbg(xhci, "Successful reset device command.\n");
+		break;
+	default:
+		if (xhci_is_vendor_info_code(xhci, ret))
+			break;
+		xhci_warn(xhci, "Unknown completion code %u for "
+				"reset device command.\n", ret);
+		ret = -EINVAL;
+		goto command_cleanup;
+	}
+
+	/* Everything but endpoint 0 is disabled, so free or cache the rings. */
+	last_freed_endpoint = 1;
+	for (i = 1; i < 31; ++i) {
+		if (!virt_dev->eps[i].ring)
+			continue;
+		xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
+		last_freed_endpoint = i;
+	}
+	xhci_dbg(xhci, "Output context after successful reset device cmd:\n");
+	xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint);
+	ret = 0;
+
+command_cleanup:
+	xhci_free_command(xhci, reset_device_cmd);
+	return ret;
+}
+
+/*
  * At this point, the struct usb_device is about to go away, the device has
  * disconnected, and all traffic has been stopped and the endpoints have been
  * disabled.  Free any HC data structures associated with that device.
@@ -1694,7 +1804,7 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
 		xhci_warn(xhci, "Cannot update hub desc for unknown device.\n");
 		return -EINVAL;
 	}
-	config_cmd = xhci_alloc_command(xhci, true, mem_flags);
+	config_cmd = xhci_alloc_command(xhci, true, true, mem_flags);
 	if (!config_cmd) {
 		xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
 		return -ENOMEM;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index eac5b53aa9e7..208b805b80eb 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -129,6 +129,50 @@ static u32 xhci_port_state_to_neutral(u32 state)
 	return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
 }
 
+static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
+		u32 __iomem *addr, u32 port_status)
+{
+	/* Write 1 to disable the port */
+	xhci_writel(xhci, port_status | PORT_PE, addr);
+	port_status = xhci_readl(xhci, addr);
+	xhci_dbg(xhci, "disable port, actual port %d status  = 0x%x\n",
+			wIndex, port_status);
+}
+
+static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
+		u16 wIndex, u32 __iomem *addr, u32 port_status)
+{
+	char *port_change_bit;
+	u32 status;
+
+	switch (wValue) {
+	case USB_PORT_FEAT_C_RESET:
+		status = PORT_RC;
+		port_change_bit = "reset";
+		break;
+	case USB_PORT_FEAT_C_CONNECTION:
+		status = PORT_CSC;
+		port_change_bit = "connect";
+		break;
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+		status = PORT_OCC;
+		port_change_bit = "over-current";
+		break;
+	case USB_PORT_FEAT_C_ENABLE:
+		status = PORT_PEC;
+		port_change_bit = "enable/disable";
+		break;
+	default:
+		/* Should never happen */
+		return;
+	}
+	/* Change bits are all write 1 to clear */
+	xhci_writel(xhci, port_status | status, addr);
+	port_status = xhci_readl(xhci, addr);
+	xhci_dbg(xhci, "clear port %s change, actual port %d status  = 0x%x\n",
+			port_change_bit, wIndex, port_status);
+}
+
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		u16 wIndex, char *buf, u16 wLength)
 {
@@ -138,7 +182,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	u32 temp, status;
 	int retval = 0;
 	u32 __iomem *addr;
-	char *port_change_bit;
 
 	ports = HCS_MAX_PORTS(xhci->hcs_params1);
 
@@ -229,26 +272,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		temp = xhci_port_state_to_neutral(temp);
 		switch (wValue) {
 		case USB_PORT_FEAT_C_RESET:
-			status = PORT_RC;
-			port_change_bit = "reset";
-			break;
 		case USB_PORT_FEAT_C_CONNECTION:
-			status = PORT_CSC;
-			port_change_bit = "connect";
-			break;
 		case USB_PORT_FEAT_C_OVER_CURRENT:
-			status = PORT_OCC;
-			port_change_bit = "over-current";
+		case USB_PORT_FEAT_C_ENABLE:
+			xhci_clear_port_change_bit(xhci, wValue, wIndex,
+					addr, temp);
+			break;
+		case USB_PORT_FEAT_ENABLE:
+			xhci_disable_port(xhci, wIndex, addr, temp);
 			break;
 		default:
 			goto error;
 		}
-		/* Change bits are all write 1 to clear */
-		xhci_writel(xhci, temp | status, addr);
-		temp = xhci_readl(xhci, addr);
-		xhci_dbg(xhci, "clear port %s change, actual port %d status  = 0x%x\n",
-				port_change_bit, wIndex, temp);
-		temp = xhci_readl(xhci, addr); /* unblock any posted writes */
 		break;
 	default:
 error:
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index bffcef7a5545..49f7d72f8b1b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -198,6 +198,31 @@ fail:
 	return 0;
 }
 
+void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		unsigned int ep_index)
+{
+	int rings_cached;
+
+	rings_cached = virt_dev->num_rings_cached;
+	if (rings_cached < XHCI_MAX_RINGS_CACHED) {
+		virt_dev->num_rings_cached++;
+		rings_cached = virt_dev->num_rings_cached;
+		virt_dev->ring_cache[rings_cached] =
+			virt_dev->eps[ep_index].ring;
+		xhci_dbg(xhci, "Cached old ring, "
+				"%d ring%s cached\n",
+				rings_cached,
+				(rings_cached > 1) ? "s" : "");
+	} else {
+		xhci_ring_free(xhci, virt_dev->eps[ep_index].ring);
+		xhci_dbg(xhci, "Ring cache full (%d rings), "
+				"freeing ring\n",
+				virt_dev->num_rings_cached);
+	}
+	virt_dev->eps[ep_index].ring = NULL;
+}
+
 /* Zero an endpoint ring (except for link TRBs) and move the enqueue and dequeue
  * pointers to the beginning of the ring.
  */
@@ -242,6 +267,8 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
 void xhci_free_container_ctx(struct xhci_hcd *xhci,
 			     struct xhci_container_ctx *ctx)
 {
+	if (!ctx)
+		return;
 	dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
 	kfree(ctx);
 }
@@ -427,7 +454,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	case USB_SPEED_LOW:
 		slot_ctx->dev_info |= (u32) SLOT_SPEED_LS;
 		break;
-	case USB_SPEED_VARIABLE:
+	case USB_SPEED_WIRELESS:
 		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
 		return -EINVAL;
 		break;
@@ -471,7 +498,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	case USB_SPEED_LOW:
 		ep0_ctx->ep_info2 |= MAX_PACKET(8);
 		break;
-	case USB_SPEED_VARIABLE:
+	case USB_SPEED_WIRELESS:
 		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
 		return -EINVAL;
 		break;
@@ -819,7 +846,8 @@ static void scratchpad_free(struct xhci_hcd *xhci)
 }
 
 struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
-		bool allocate_completion, gfp_t mem_flags)
+		bool allocate_in_ctx, bool allocate_completion,
+		gfp_t mem_flags)
 {
 	struct xhci_command *command;
 
@@ -827,11 +855,14 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
 	if (!command)
 		return NULL;
 
-	command->in_ctx =
-		xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, mem_flags);
-	if (!command->in_ctx) {
-		kfree(command);
-		return NULL;
+	if (allocate_in_ctx) {
+		command->in_ctx =
+			xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT,
+					mem_flags);
+		if (!command->in_ctx) {
+			kfree(command);
+			return NULL;
+		}
 	}
 
 	if (allocate_completion) {
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index e097008d6fb1..417d37aff8d7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -139,6 +139,7 @@ static const struct hc_driver xhci_pci_hc_driver = {
 	.reset_bandwidth =	xhci_reset_bandwidth,
 	.address_device =	xhci_address_device,
 	.update_hub_device =	xhci_update_hub_device,
+	.reset_device =		xhci_reset_device,
 
 	/*
 	 * scheduling support
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index ee7bc7ecbc59..6ba841bca4a2 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -953,6 +953,17 @@ bandwidth_change:
 	case TRB_TYPE(TRB_RESET_EP):
 		handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
 		break;
+	case TRB_TYPE(TRB_RESET_DEV):
+		xhci_dbg(xhci, "Completed reset device command.\n");
+		slot_id = TRB_TO_SLOT_ID(
+				xhci->cmd_ring->dequeue->generic.field[3]);
+		virt_dev = xhci->devs[slot_id];
+		if (virt_dev)
+			handle_cmd_in_cmd_wait_list(xhci, virt_dev, event);
+		else
+			xhci_warn(xhci, "Reset device command completion "
+					"for disabled slot %u\n", slot_id);
+		break;
 	default:
 		/* Skip over unknown commands on the event ring */
 		xhci->error_bitmask |= 1 << 6;
@@ -1080,6 +1091,20 @@ static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
 	return 0;
 }
 
+int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
+{
+	if (trb_comp_code >= 224 && trb_comp_code <= 255) {
+		/* Vendor defined "informational" completion code,
+		 * treat as not-an-error.
+		 */
+		xhci_dbg(xhci, "Vendor defined info completion code %u\n",
+				trb_comp_code);
+		xhci_dbg(xhci, "Treating code as success.\n");
+		return 1;
+	}
+	return 0;
+}
+
 /*
  * If this function returns an error condition, it means it got a Transfer
  * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
@@ -1196,13 +1221,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		status = -ENOSR;
 		break;
 	default:
-		if (trb_comp_code >= 224 && trb_comp_code <= 255) {
-			/* Vendor defined "informational" completion code,
-			 * treat as not-an-error.
-			 */
-			xhci_dbg(xhci, "Vendor defined info completion code %u\n",
-					trb_comp_code);
-			xhci_dbg(xhci, "Treating code as success.\n");
+		if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
 			status = 0;
 			break;
 		}
@@ -2181,6 +2200,14 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 			false);
 }
 
+/* Queue a reset device command TRB */
+int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id)
+{
+	return queue_command(xhci, 0, 0, 0,
+			TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id),
+			false);
+}
+
 /* Queue a configure endpoint command TRB */
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id, bool command_must_succeed)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 877813505ef2..e5eb09b2f38e 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1210,6 +1210,8 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
 void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
 void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
 void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
+char *xhci_get_slot_state(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *ctx);
 
 /* xHCI memory management */
 void xhci_mem_cleanup(struct xhci_hcd *xhci);
@@ -1233,8 +1235,12 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
 		struct usb_device *udev, struct usb_host_endpoint *ep,
 		gfp_t mem_flags);
 void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
+void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		unsigned int ep_index);
 struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
-		bool allocate_completion, gfp_t mem_flags);
+		bool allocate_in_ctx, bool allocate_completion,
+		gfp_t mem_flags);
 void xhci_free_command(struct xhci_hcd *xhci,
 		struct xhci_command *command);
 
@@ -1264,6 +1270,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
 int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
 int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
 void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
+int xhci_reset_device(struct usb_hcd *hcd, struct usb_device *udev);
 int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
 void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
 
@@ -1272,6 +1279,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
 struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
 		union xhci_trb *start_trb, union xhci_trb *end_trb,
 		dma_addr_t suspect_dma);
+int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
 void xhci_ring_cmd_db(struct xhci_hcd *xhci);
 void *xhci_setup_one_noop(struct xhci_hcd *xhci);
 void xhci_handle_event(struct xhci_hcd *xhci);
@@ -1293,6 +1301,7 @@ int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id);
 int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index);
+int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id);
 void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
 		struct xhci_td *cur_td, struct xhci_dequeue_state *state);
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index eca355dccf65..e192e8f7c560 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -967,7 +967,7 @@ static const struct file_operations mdc800_device_ops =
 
 
 
-static struct usb_device_id mdc800_table [] = {
+static const struct usb_device_id mdc800_table[] = {
 	{ USB_DEVICE(MDC800_VENDOR_ID, MDC800_PRODUCT_ID) },
 	{ }						/* Terminating entry */
 };
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 459a7287fe01..3a6bcd5fee09 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -155,7 +155,7 @@ static int mts_usb_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id);
 static void mts_usb_disconnect(struct usb_interface *intf);
 
-static struct usb_device_id mts_usb_ids [];
+static const struct usb_device_id mts_usb_ids[];
 
 static struct usb_driver mts_usb_driver = {
 	.name =		"microtekX6",
@@ -656,7 +656,7 @@ static struct scsi_host_template mts_scsi_host_template = {
 /* The entries of microtek_table must correspond, line-by-line to
    the entries of mts_supported_products[]. */
 
-static struct usb_device_id mts_usb_ids [] =
+static const struct usb_device_id mts_usb_ids[] =
 {
 	{ USB_DEVICE(0x4ce, 0x0300) },
 	{ USB_DEVICE(0x5da, 0x0094) },
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index abe3aa67ed00..55660eaf947c 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -87,17 +87,6 @@ config USB_LCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called usblcd.
 
-config USB_BERRY_CHARGE
-	tristate "USB BlackBerry recharge support"
-	depends on USB
-	help
-	  Say Y here if you want to connect a BlackBerry device to your
-	  computer's USB port and have it automatically switch to "recharge"
-	  mode.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called berry_charge.
-
 config USB_LED
 	tristate "USB LED driver support"
 	depends on USB
@@ -242,17 +231,3 @@ config USB_ISIGHTFW
 	  driver beforehand. Tools for doing so are available at
 	  http://bersace03.free.fr
 
-config USB_VST
-	tristate "USB VST driver"
-	depends on USB
-	help
-	  This driver is intended for Vernier Software Technologies
-	  bulk usb devices such as their Ocean-Optics spectrometers or
-	  Labquest.
-	  It is a bulk channel driver with configurable read and write
-	  timeouts.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vstusb.
-
-
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 0826aab8303f..717703e81425 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -5,7 +5,6 @@
 
 obj-$(CONFIG_USB_ADUTUX)	+= adutux.o
 obj-$(CONFIG_USB_APPLEDISPLAY)	+= appledisplay.o
-obj-$(CONFIG_USB_BERRY_CHARGE)	+= berry_charge.o
 obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)	+= cytherm.o
 obj-$(CONFIG_USB_EMI26)		+= emi26.o
@@ -23,7 +22,6 @@ obj-$(CONFIG_USB_TEST)		+= usbtest.o
 obj-$(CONFIG_USB_TRANCEVIBRATOR)	+= trancevibrator.o
 obj-$(CONFIG_USB_USS720)	+= uss720.o
 obj-$(CONFIG_USB_SEVSEG)	+= usbsevseg.o
-obj-$(CONFIG_USB_VST)		+= vstusb.o
 
 obj-$(CONFIG_USB_SISUSBVGA)	+= sisusbvga/
 
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 203526542013..d240de097c62 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -38,7 +38,7 @@ static int debug = 1;
 #define dbg(lvl, format, arg...) 					\
 do { 									\
 	if (debug >= lvl)						\
-		printk(KERN_DEBUG __FILE__ " : " format " \n", ## arg);	\
+		printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg);	\
 } while (0)
 
 
@@ -56,7 +56,7 @@ MODULE_PARM_DESC(debug, "Debug enabled or not");
 #define ADU_PRODUCT_ID 0x0064
 
 /* table of devices that work with this driver */
-static struct usb_device_id device_table [] = {
+static const struct usb_device_id device_table[] = {
 	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) },		/* ADU100 */
 	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, 	/* ADU120 */
 	{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, 	/* ADU130 */
@@ -132,8 +132,8 @@ static void adu_debug_data(int level, const char *function, int size,
 	if (debug < level)
 		return;
 
-	printk(KERN_DEBUG __FILE__": %s - length = %d, data = ",
-	       function, size);
+	printk(KERN_DEBUG "%s: %s - length = %d, data = ",
+	       __FILE__, function, size);
 	for (i = 0; i < size; ++i)
 		printk("%.2x ", data[i]);
 	printk("\n");
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 1eb9e4162cc6..4d2952f1fb13 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -57,7 +57,7 @@
 	.bInterfaceProtocol = 0x00
 
 /* table of devices that work with this driver */
-static struct usb_device_id appledisplay_table [] = {
+static const struct usb_device_id appledisplay_table[] = {
 	{ APPLEDISPLAY_DEVICE(0x9218) },
 	{ APPLEDISPLAY_DEVICE(0x9219) },
 	{ APPLEDISPLAY_DEVICE(0x921c) },
@@ -179,7 +179,7 @@ static int appledisplay_bl_get_brightness(struct backlight_device *bd)
 		return pdata->msgdata[1];
 }
 
-static struct backlight_ops appledisplay_bl_data = {
+static const struct backlight_ops appledisplay_bl_data = {
 	.get_brightness	= appledisplay_bl_get_brightness,
 	.update_status	= appledisplay_bl_update_status,
 };
@@ -283,6 +283,7 @@ static int appledisplay_probe(struct usb_interface *iface,
 						&appledisplay_bl_data);
 	if (IS_ERR(pdata->bd)) {
 		dev_err(&iface->dev, "Backlight registration failed\n");
+		retval = PTR_ERR(pdata->bd);
 		goto error;
 	}
 
diff --git a/drivers/usb/misc/berry_charge.c b/drivers/usb/misc/berry_charge.c
deleted file mode 100644
index c05a85bc5925..000000000000
--- a/drivers/usb/misc/berry_charge.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * USB BlackBerry charging module
- *
- * Copyright (C) 2007 Greg Kroah-Hartman <gregkh@suse.de>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
- * Information on how to switch configs was taken by the bcharge.cc file
- * created by the barry.sf.net project.
- *
- * bcharge.cc has the following copyright:
- * 	Copyright (C) 2006, Net Direct Inc. (http://www.netdirect.ca/)
- * and is released under the GPLv2.
- *
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-
-#define RIM_VENDOR		0x0fca
-#define BLACKBERRY		0x0001
-#define BLACKBERRY_PEARL_DUAL   0x0004
-#define BLACKBERRY_PEARL        0x0006
-
-static int debug;
-static int pearl_dual_mode = 1;
-
-#ifdef dbg
-#undef dbg
-#endif
-#define dbg(dev, format, arg...)				\
-	if (debug)						\
-		dev_printk(KERN_DEBUG , dev , format , ## arg)
-
-static struct usb_device_id id_table [] = {
-	{ USB_DEVICE(RIM_VENDOR, BLACKBERRY) },
-	{ USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL) },
-	{ USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL_DUAL) },
-	{ },					/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static int magic_charge(struct usb_device *udev)
-{
-	char *dummy_buffer = kzalloc(2, GFP_KERNEL);
-	int retval;
-
-	if (!dummy_buffer)
-		return -ENOMEM;
-
-	/* send two magic commands and then set the configuration.  The device
-	 * will then reset itself with the new power usage and should start
-	 * charging. */
-
-	/* Note, with testing, it only seems that the first message is really
-	 * needed (at least for the 8700c), but to be safe, we emulate what
-	 * other operating systems seem to be sending to their device.  We
-	 * really need to get some specs for this device to be sure about what
-	 * is going on here.
-	 */
-	dbg(&udev->dev, "Sending first magic command\n");
-	retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 0xa5, 0xc0, 0, 1, dummy_buffer, 2, 100);
-	if (retval != 2) {
-		dev_err(&udev->dev, "First magic command failed: %d.\n",
-			retval);
-		goto exit;
-	}
-
-	dbg(&udev->dev, "Sending second magic command\n");
-	retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 0xa2, 0x40, 0, 1, dummy_buffer, 0, 100);
-	if (retval != 0) {
-		dev_err(&udev->dev, "Second magic command failed: %d.\n",
-			retval);
-		goto exit;
-	}
-
-	dbg(&udev->dev, "Calling set_configuration\n");
-	retval = usb_driver_set_configuration(udev, 1);
-	if (retval)
-		dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
-
-exit:
-	kfree(dummy_buffer);
-	return retval;
-}
-
-static int magic_dual_mode(struct usb_device *udev)
-{
-	char *dummy_buffer = kzalloc(2, GFP_KERNEL);
-	int retval;
-
-	if (!dummy_buffer)
-		return -ENOMEM;
-
-	/* send magic command so that the Blackberry Pearl device exposes
-	 * two interfaces: both the USB mass-storage one and one which can
-	 * be used for database access. */
-	dbg(&udev->dev, "Sending magic pearl command\n");
-	retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 0xa9, 0xc0, 1, 1, dummy_buffer, 2, 100);
-	dbg(&udev->dev, "Magic pearl command returned %d\n", retval);
-
-	dbg(&udev->dev, "Calling set_configuration\n");
-	retval = usb_driver_set_configuration(udev, 1);
-	if (retval)
-		dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
-
-	kfree(dummy_buffer);
-	return retval;
-}
-
-static int berry_probe(struct usb_interface *intf,
-		       const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-
-	if (udev->bus_mA < 500) {
-		dbg(&udev->dev, "Not enough power to charge available\n");
-		return -ENODEV;
-	}
-
-	dbg(&udev->dev, "Power is set to %dmA\n",
-	    udev->actconfig->desc.bMaxPower * 2);
-
-	/* check the power usage so we don't try to enable something that is
-	 * already enabled */
-	if ((udev->actconfig->desc.bMaxPower * 2) == 500) {
-		dbg(&udev->dev, "device is already charging, power is "
-		    "set to %dmA\n", udev->actconfig->desc.bMaxPower * 2);
-		return -ENODEV;
-	}
-
-	/* turn the power on */
-	magic_charge(udev);
-
-	if ((le16_to_cpu(udev->descriptor.idProduct) == BLACKBERRY_PEARL) &&
-	    (pearl_dual_mode))
-		magic_dual_mode(udev);
-
-	/* we don't really want to bind to the device, userspace programs can
-	 * handle the syncing just fine, so get outta here. */
-	return -ENODEV;
-}
-
-static void berry_disconnect(struct usb_interface *intf)
-{
-}
-
-static struct usb_driver berry_driver = {
-	.name =		"berry_charge",
-	.probe =	berry_probe,
-	.disconnect =	berry_disconnect,
-	.id_table =	id_table,
-};
-
-static int __init berry_init(void)
-{
-	return usb_register(&berry_driver);
-}
-
-static void __exit berry_exit(void)
-{
-	usb_deregister(&berry_driver);
-}
-
-module_init(berry_init);
-module_exit(berry_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
-module_param(pearl_dual_mode, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(pearl_dual_mode, "Change Blackberry Pearl to run in dual mode");
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 5720bfef6a38..1547d8cac5fb 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -56,7 +56,7 @@
 
 
 /* table of devices that work with this driver */
-static struct usb_device_id cypress_table [] = {
+static const struct usb_device_id cypress_table[] = {
 	{ USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) },
 	{ }
 };
diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c
index 4fb3c38b924b..b9cbbbda8245 100644
--- a/drivers/usb/misc/cytherm.c
+++ b/drivers/usb/misc/cytherm.c
@@ -27,7 +27,7 @@
 #define USB_SKEL_VENDOR_ID	0x04b4
 #define USB_SKEL_PRODUCT_ID	0x0002
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
 	{ }
 };
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 879a980ca8c4..a6521c95f683 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -245,7 +245,7 @@ wraperr:
 	return err;
 }
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) },
 	{ USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) },
 	{ }                                             /* Terminating entry */
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 59860b328534..fc15ad4c3139 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -259,7 +259,7 @@ wraperr:
 	return err;
 }
 
-static __devinitdata struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] __devinitconst = {
 	{ USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) },
 	{ }                                             /* Terminating entry */
 };
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 9d0675ed0d4c..1edb6d361896 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -86,7 +86,7 @@ static struct list_head ftdi_static_list;
 #define USB_FTDI_ELAN_VENDOR_ID 0x0403
 #define USB_FTDI_ELAN_PRODUCT_ID 0xd6ea
 /* table of devices that work with this driver*/
-static struct usb_device_id ftdi_elan_table[] = {
+static const struct usb_device_id ftdi_elan_table[] = {
         {USB_DEVICE(USB_FTDI_ELAN_VENDOR_ID, USB_FTDI_ELAN_PRODUCT_ID)},
         { /* Terminating entry */ }
 };
@@ -623,9 +623,12 @@ static void ftdi_elan_status_work(struct work_struct *work)
 */
 static int ftdi_elan_open(struct inode *inode, struct file *file)
 {
-        int subminor = iminor(inode);
-        struct usb_interface *interface = usb_find_interface(&ftdi_elan_driver,
-                subminor);
+	int subminor;
+	struct usb_interface *interface;
+
+        subminor = iminor(inode);
+        interface = usb_find_interface(&ftdi_elan_driver, subminor);
+
         if (!interface) {
                 printk(KERN_ERR "can't find device for minor %d\n", subminor);
                 return -ENODEV;
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 1337a9ce80b9..a54c3cb804ce 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -48,7 +48,7 @@
 #define ID_CHERRY  0x0010
 
 /* device ID table */
-static struct usb_device_id idmouse_table[] = {
+static const struct usb_device_id idmouse_table[] = {
 	{USB_DEVICE(ID_SIEMENS, ID_IDMOUSE)}, /* Siemens ID Mouse (Professional) */
 	{USB_DEVICE(ID_SIEMENS, ID_CHERRY )}, /* Cherry FingerTIP ID Board       */
 	{}                                    /* terminating null entry          */
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index e75bb87ee92b..d3c852363883 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -139,7 +139,7 @@ static int usb_set_report(struct usb_interface *intf, unsigned char type,
 /* driver registration */
 /*---------------------*/
 /* table of devices that work with this driver */
-static struct usb_device_id iowarrior_ids[] = {
+static const struct usb_device_id iowarrior_ids[] = {
 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)},
 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)},
 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)},
@@ -602,10 +602,12 @@ static int iowarrior_open(struct inode *inode, struct file *file)
 
 	dbg("%s", __func__);
 
+	lock_kernel();
 	subminor = iminor(inode);
 
 	interface = usb_find_interface(&iowarrior_driver, subminor);
 	if (!interface) {
+		unlock_kernel();
 		err("%s - error, can't find device for minor %d", __func__,
 		    subminor);
 		return -ENODEV;
@@ -615,6 +617,7 @@ static int iowarrior_open(struct inode *inode, struct file *file)
 	dev = usb_get_intfdata(interface);
 	if (!dev) {
 		mutex_unlock(&iowarrior_open_disc_lock);
+		unlock_kernel();
 		return -ENODEV;
 	}
 
@@ -641,6 +644,7 @@ static int iowarrior_open(struct inode *inode, struct file *file)
 
 out:
 	mutex_unlock(&dev->mutex);
+	unlock_kernel();
 	return retval;
 }
 
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index b897f6554ecd..06e990adc6cd 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -26,7 +26,7 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x05ac, 0x8300)},
 	{},
 };
@@ -112,6 +112,8 @@ out:
 	return ret;
 }
 
+MODULE_FIRMWARE("isight.fw");
+
 static void isight_firmware_disconnect(struct usb_interface *intf)
 {
 }
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 90f130126c10..dd41d8710043 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -69,7 +69,7 @@
 #endif
 
 /* table of devices that work with this driver */
-static struct usb_device_id ld_usb_table [] = {
+static const struct usb_device_id ld_usb_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) },
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) },
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY) },
@@ -798,7 +798,7 @@ static int __init ld_usb_init(void)
 	/* register this driver with the USB subsystem */
 	retval = usb_register(&ld_usb_driver);
 	if (retval)
-		err("usb_register failed for the "__FILE__" driver. Error number %d\n", retval);
+		err("usb_register failed for the %s driver. Error number %d\n", __FILE__, retval);
 
 	return retval;
 }
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index faa6d623de78..8547bf9e3175 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -95,8 +95,11 @@
 
 /* Use our own dbg macro */
 #undef dbg
-#define dbg(lvl, format, arg...) do { if (debug >= lvl) printk(KERN_DEBUG  __FILE__ ": " format "\n", ## arg); } while (0)
-
+#define dbg(lvl, format, arg...)					\
+do {									\
+	if (debug >= lvl)						\
+		printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg);	\
+} while (0)
 
 /* Version Information */
 #define DRIVER_VERSION "v0.96"
@@ -192,7 +195,7 @@ struct tower_get_version_reply {
 
 
 /* table of devices that work with this driver */
-static struct usb_device_id tower_table [] = {
+static const struct usb_device_id tower_table[] = {
 	{ USB_DEVICE(LEGO_USB_TOWER_VENDOR_ID, LEGO_USB_TOWER_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
@@ -302,7 +305,7 @@ static inline void lego_usb_tower_debug_data (int level, const char *function, i
 	if (debug < level)
 		return;
 
-	printk (KERN_DEBUG __FILE__": %s - length = %d, data = ", function, size);
+	printk (KERN_DEBUG "%s: %s - length = %d, data = ", __FILE__, function, size);
 	for (i = 0; i < size; ++i) {
 		printk ("%.2x ", data[i]);
 	}
@@ -1055,7 +1058,7 @@ static int __init lego_usb_tower_init(void)
 	/* register this driver with the USB subsystem */
 	result = usb_register(&tower_driver);
 	if (result < 0) {
-		err("usb_register failed for the "__FILE__" driver. Error number %d", result);
+		err("usb_register failed for the %s driver. Error number %d", __FILE__, result);
 		retval = -1;
 		goto exit;
 	}
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index 32d0199d0c32..a85771b1563d 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -78,10 +78,13 @@ static int open_rio(struct inode *inode, struct file *file)
 {
 	struct rio_usb_data *rio = &rio_instance;
 
+	/* against disconnect() */
+	lock_kernel();
 	mutex_lock(&(rio->lock));
 
 	if (rio->isopen || !rio->present) {
 		mutex_unlock(&(rio->lock));
+		unlock_kernel();
 		return -EBUSY;
 	}
 	rio->isopen = 1;
@@ -91,6 +94,7 @@ static int open_rio(struct inode *inode, struct file *file)
 	mutex_unlock(&(rio->lock));
 
 	dev_info(&rio->rio_dev->dev, "Rio opened.\n");
+	unlock_kernel();
 
 	return 0;
 }
@@ -115,7 +119,6 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
 	int retries;
 	int retval=0;
 
-	lock_kernel();
 	mutex_lock(&(rio->lock));
         /* Sanity check to make sure rio is connected, powered, etc */
         if (rio->present == 0 || rio->rio_dev == NULL) {
@@ -254,7 +257,6 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
 
 err_out:
 	mutex_unlock(&(rio->lock));
-	unlock_kernel();
 	return retval;
 }
 
@@ -489,6 +491,7 @@ static void disconnect_rio(struct usb_interface *intf)
 	struct rio_usb_data *rio = usb_get_intfdata (intf);
 
 	usb_set_intfdata (intf, NULL);
+	lock_kernel();
 	if (rio) {
 		usb_deregister_dev(intf, &usb_rio_class);
 
@@ -498,6 +501,7 @@ static void disconnect_rio(struct usb_interface *intf)
 			/* better let it finish - the release will do whats needed */
 			rio->rio_dev = NULL;
 			mutex_unlock(&(rio->lock));
+			unlock_kernel();
 			return;
 		}
 		kfree(rio->ibuf);
@@ -508,9 +512,10 @@ static void disconnect_rio(struct usb_interface *intf)
 		rio->present = 0;
 		mutex_unlock(&(rio->lock));
 	}
+	unlock_kernel();
 }
 
-static struct usb_device_id rio_table [] = {
+static const struct usb_device_id rio_table[] = {
 	{ USB_DEVICE(0x0841, 1) }, 		/* Rio 500 */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 8b37a4b9839e..aae95a009bd5 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -250,7 +250,7 @@ sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe,
 	sisusb->urbstatus[index] |= SU_URB_BUSY;
 
 	/* Submit URB */
-	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_KERNEL);
 
 	/* If OK, and if timeout > 0, wait for completion */
 	if ((retval == 0) && timeout) {
@@ -306,7 +306,7 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data,
 	urb->actual_length = 0;
 
 	sisusb->completein = 0;
-	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_KERNEL);
 	if (retval == 0) {
 		wait_event_timeout(sisusb->wait_q, sisusb->completein, timeout);
 		if (!sisusb->completein) {
@@ -2416,21 +2416,28 @@ sisusb_open(struct inode *inode, struct file *file)
 	struct usb_interface *interface;
 	int subminor = iminor(inode);
 
-	if (!(interface = usb_find_interface(&sisusb_driver, subminor)))
+	lock_kernel();
+	if (!(interface = usb_find_interface(&sisusb_driver, subminor))) {
+		unlock_kernel();
 		return -ENODEV;
+	}
 
-	if (!(sisusb = usb_get_intfdata(interface)))
+	if (!(sisusb = usb_get_intfdata(interface))) {
+		unlock_kernel();
 		return -ENODEV;
+	}
 
 	mutex_lock(&sisusb->lock);
 
 	if (!sisusb->present || !sisusb->ready) {
 		mutex_unlock(&sisusb->lock);
+		unlock_kernel();
 		return -ENODEV;
 	}
 
 	if (sisusb->isopen) {
 		mutex_unlock(&sisusb->lock);
+		unlock_kernel();
 		return -EBUSY;
 	}
 
@@ -2439,11 +2446,13 @@ sisusb_open(struct inode *inode, struct file *file)
 			if (sisusb_init_gfxdevice(sisusb, 0)) {
 				mutex_unlock(&sisusb->lock);
 				dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n");
+				unlock_kernel();
 				return -EIO;
 			}
 		} else {
 			mutex_unlock(&sisusb->lock);
 			dev_err(&sisusb->sisusb_dev->dev, "Device not attached to USB 2.0 hub\n");
+			unlock_kernel();
 			return -EIO;
 		}
 	}
@@ -2456,6 +2465,7 @@ sisusb_open(struct inode *inode, struct file *file)
 	file->private_data = sisusb;
 
 	mutex_unlock(&sisusb->lock);
+	unlock_kernel();
 
 	return 0;
 }
@@ -3238,7 +3248,7 @@ static void sisusb_disconnect(struct usb_interface *intf)
 	kref_put(&sisusb->kref, sisusb_delete);
 }
 
-static struct usb_device_id sisusb_table [] = {
+static const struct usb_device_id sisusb_table[] = {
 	{ USB_DEVICE(0x0711, 0x0550) },
 	{ USB_DEVICE(0x0711, 0x0900) },
 	{ USB_DEVICE(0x0711, 0x0901) },
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index 2e14102955c5..5da28eaee314 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -33,7 +33,7 @@
 #define TRANCEVIBRATOR_VENDOR_ID	0x0b49	/* ASCII Corporation */
 #define TRANCEVIBRATOR_PRODUCT_ID	0x064f	/* Trance Vibrator */
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(TRANCEVIBRATOR_VENDOR_ID, TRANCEVIBRATOR_PRODUCT_ID) },
 	{ },
 };
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 4fb120357c55..90aede90553e 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -30,7 +30,7 @@
 #define IOCTL_GET_DRV_VERSION	2
 
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, },
 	{ },
 };
@@ -74,10 +74,12 @@ static int lcd_open(struct inode *inode, struct file *file)
 	struct usb_interface *interface;
 	int subminor, r;
 
+	lock_kernel();
 	subminor = iminor(inode);
 
 	interface = usb_find_interface(&lcd_driver, subminor);
 	if (!interface) {
+		unlock_kernel();
 		err ("USBLCD: %s - error, can't find device for minor %d",
 		     __func__, subminor);
 		return -ENODEV;
@@ -87,6 +89,7 @@ static int lcd_open(struct inode *inode, struct file *file)
 	dev = usb_get_intfdata(interface);
 	if (!dev) {
 		mutex_unlock(&open_disc_mutex);
+		unlock_kernel();
 		return -ENODEV;
 	}
 
@@ -98,11 +101,13 @@ static int lcd_open(struct inode *inode, struct file *file)
 	r = usb_autopm_get_interface(interface);
 	if (r < 0) {
 		kref_put(&dev->kref, lcd_delete);
+		unlock_kernel();
 		return r;
 	}
 
 	/* save our object in the file's private structure */
 	file->private_data = dev;
+	unlock_kernel();
 
 	return 0;
 }
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 06cb71942dc7..63da2c3c838f 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -24,7 +24,7 @@
 #define PRODUCT_ID	0x1223
 
 /* table of devices that work with this driver */
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(VENDOR_ID, PRODUCT_ID) },
 	{ },
 };
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 3db255537e79..a9555cb901a1 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -27,7 +27,7 @@
 #define MAXLEN		6
 
 /* table of devices that work with this driver */
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(VENDOR_ID, PRODUCT_ID) },
 	{ },
 };
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 3dab0c0b196f..a21cce6f7403 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1580,10 +1580,6 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
 		return -ERESTARTSYS;
 
 	/* FIXME: What if a system sleep starts while a test is running? */
-	if (!intf->is_active) {
-		mutex_unlock(&dev->lock);
-		return -EHOSTUNREACH;
-	}
 
 	/* some devices, like ez-usb default devices, need a non-default
 	 * altsetting to have any active endpoints.  some tests change
@@ -2101,7 +2097,7 @@ static struct usbtest_info generic_info = {
 #endif
 
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 
 	/*-------------------------------------------------------------*/
 
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 9a6c27a01793..f56fed53f2dd 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -770,7 +770,7 @@ static void uss720_disconnect(struct usb_interface *intf)
 }
 
 /* table of cables that work through this driver */
-static struct usb_device_id uss720_table [] = {
+static const struct usb_device_id uss720_table[] = {
 	{ USB_DEVICE(0x047e, 0x1001) },
 	{ USB_DEVICE(0x0557, 0x2001) },
 	{ USB_DEVICE(0x0729, 0x1284) },
diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c
deleted file mode 100644
index f26ea8dc1577..000000000000
--- a/drivers/usb/misc/vstusb.c
+++ /dev/null
@@ -1,783 +0,0 @@
-/*****************************************************************************
- *  File: drivers/usb/misc/vstusb.c
- *
- *  Purpose: Support for the bulk USB Vernier Spectrophotometers
- *
- *  Author:     Johnnie Peters
- *              Axian Consulting
- *              Beaverton, OR, USA 97005
- *
- *  Modified by:     EQware Engineering, Inc.
- *                   Oregon City, OR, USA 97045
- *
- *  Copyright:  2007, 2008
- *              Vernier Software & Technology
- *              Beaverton, OR, USA 97005
- *
- *  Web:        www.vernier.com
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *****************************************************************************/
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-
-#include <linux/usb/vstusb.h>
-
-#define DRIVER_VERSION "VST USB Driver Version 1.5"
-#define DRIVER_DESC "Vernier Software Technology Bulk USB Driver"
-
-#ifdef CONFIG_USB_DYNAMIC_MINORS
-	#define VSTUSB_MINOR_BASE	0
-#else
-	#define VSTUSB_MINOR_BASE	199
-#endif
-
-#define USB_VENDOR_OCEANOPTICS	0x2457
-#define USB_VENDOR_VERNIER	0x08F7	/* Vernier Software & Technology */
-
-#define USB_PRODUCT_USB2000	0x1002
-#define USB_PRODUCT_ADC1000_FW	0x1003	/* firmware download (renumerates) */
-#define USB_PRODUCT_ADC1000	0x1004
-#define USB_PRODUCT_HR2000_FW	0x1009	/* firmware download (renumerates) */
-#define USB_PRODUCT_HR2000	0x100A
-#define USB_PRODUCT_HR4000_FW	0x1011	/* firmware download (renumerates) */
-#define USB_PRODUCT_HR4000	0x1012
-#define USB_PRODUCT_USB650	0x1014	/* "Red Tide" */
-#define USB_PRODUCT_QE65000	0x1018
-#define USB_PRODUCT_USB4000	0x1022
-#define USB_PRODUCT_USB325	0x1024	/* "Vernier Spectrometer" */
-
-#define USB_PRODUCT_LABPRO	0x0001
-#define USB_PRODUCT_LABQUEST	0x0005
-
-#define VST_MAXBUFFER		(64*1024)
-
-static struct usb_device_id id_table[] = {
-	{ USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB2000)},
-	{ USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_HR4000)},
-	{ USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB650)},
-	{ USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB4000)},
-	{ USB_DEVICE(USB_VENDOR_OCEANOPTICS, USB_PRODUCT_USB325)},
-	{ USB_DEVICE(USB_VENDOR_VERNIER, USB_PRODUCT_LABQUEST)},
-	{ USB_DEVICE(USB_VENDOR_VERNIER, USB_PRODUCT_LABPRO)},
-	{},
-};
-
-MODULE_DEVICE_TABLE(usb, id_table);
-
-struct vstusb_device {
-	struct kref				kref;
-	struct mutex            lock;
-	struct usb_device       *usb_dev;
-	char                    present;
-	char                    isopen;
-	struct usb_anchor       submitted;
-	int                     rd_pipe;
-	int                     rd_timeout_ms;
-	int                     wr_pipe;
-	int                     wr_timeout_ms;
-};
-#define to_vst_dev(d) container_of(d, struct vstusb_device, kref)
-
-static struct usb_driver vstusb_driver;
-
-static void vstusb_delete(struct kref *kref)
-{
-	struct vstusb_device *vstdev = to_vst_dev(kref);
-
-	usb_put_dev(vstdev->usb_dev);
-	kfree(vstdev);
-}
-
-static int vstusb_open(struct inode *inode, struct file *file)
-{
-	struct vstusb_device *vstdev;
-	struct usb_interface *interface;
-
-	interface = usb_find_interface(&vstusb_driver, iminor(inode));
-
-	if (!interface) {
-		printk(KERN_ERR KBUILD_MODNAME
-		       ": %s - error, can't find device for minor %d\n",
-		       __func__, iminor(inode));
-		return -ENODEV;
-	}
-
-	vstdev = usb_get_intfdata(interface);
-
-	if (!vstdev)
-		return -ENODEV;
-
-	/* lock this device */
-	mutex_lock(&vstdev->lock);
-
-	/* can only open one time */
-	if ((!vstdev->present) || (vstdev->isopen)) {
-		mutex_unlock(&vstdev->lock);
-		return -EBUSY;
-	}
-
-	/* increment our usage count */
-	kref_get(&vstdev->kref);
-
-	vstdev->isopen = 1;
-
-	/* save device in the file's private structure */
-	file->private_data = vstdev;
-
-	dev_dbg(&vstdev->usb_dev->dev, "%s: opened\n", __func__);
-
-	mutex_unlock(&vstdev->lock);
-
-	return 0;
-}
-
-static int vstusb_release(struct inode *inode, struct file *file)
-{
-	struct vstusb_device *vstdev;
-
-	vstdev = file->private_data;
-
-	if (vstdev == NULL)
-		return -ENODEV;
-
-	mutex_lock(&vstdev->lock);
-
-	vstdev->isopen = 0;
-
-	dev_dbg(&vstdev->usb_dev->dev, "%s: released\n", __func__);
-
-	mutex_unlock(&vstdev->lock);
-
-	kref_put(&vstdev->kref, vstusb_delete);
-
-	return 0;
-}
-
-static void usb_api_blocking_completion(struct urb *urb)
-{
-	struct completion *completeit = urb->context;
-
-	complete(completeit);
-}
-
-static int vstusb_fill_and_send_urb(struct urb *urb,
-				    struct usb_device *usb_dev,
-				    unsigned int pipe, void *data,
-				    unsigned int len, struct completion *done)
-{
-	struct usb_host_endpoint *ep;
-	struct usb_host_endpoint **hostep;
-	unsigned int pipend;
-
-	int status;
-
-	hostep = usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out;
-	pipend = usb_pipeendpoint(pipe);
-	ep = hostep[pipend];
-
-	if (!ep || (len == 0))
-		return -EINVAL;
-
-	if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-	    == USB_ENDPOINT_XFER_INT) {
-		pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
-		usb_fill_int_urb(urb, usb_dev, pipe, data, len,
-				 (usb_complete_t)usb_api_blocking_completion,
-				 NULL, ep->desc.bInterval);
-	} else
-		usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
-				  (usb_complete_t)usb_api_blocking_completion,
-				  NULL);
-
-	init_completion(done);
-	urb->context = done;
-	urb->actual_length = 0;
-	status = usb_submit_urb(urb, GFP_KERNEL);
-
-	return status;
-}
-
-static int vstusb_complete_urb(struct urb *urb, struct completion *done,
-			       int timeout, int *actual_length)
-{
-	unsigned long expire;
-	int status;
-
-	expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT;
-	if (!wait_for_completion_interruptible_timeout(done, expire)) {
-		usb_kill_urb(urb);
-		status = urb->status == -ENOENT ? -ETIMEDOUT : urb->status;
-
-		dev_dbg(&urb->dev->dev,
-			"%s timed out on ep%d%s len=%d/%d, urb status = %d\n",
-			current->comm,
-			usb_pipeendpoint(urb->pipe),
-			usb_pipein(urb->pipe) ? "in" : "out",
-			urb->actual_length,
-			urb->transfer_buffer_length,
-			urb->status);
-
-	} else {
-		if (signal_pending(current)) {
-			/* if really an error */
-			if (urb->status && !((urb->status == -ENOENT)     ||
-					     (urb->status == -ECONNRESET) ||
-					     (urb->status == -ESHUTDOWN))) {
-				status = -EINTR;
-				usb_kill_urb(urb);
-			} else {
-				status = 0;
-			}
-
-			dev_dbg(&urb->dev->dev,
-				"%s: signal pending on ep%d%s len=%d/%d,"
-				"urb status = %d\n",
-				current->comm,
-				usb_pipeendpoint(urb->pipe),
-				usb_pipein(urb->pipe) ? "in" : "out",
-				urb->actual_length,
-				urb->transfer_buffer_length,
-				urb->status);
-
-		} else {
-			status = urb->status;
-		}
-	}
-
-	if (actual_length)
-		*actual_length = urb->actual_length;
-
-	return status;
-}
-
-static ssize_t vstusb_read(struct file *file, char __user *buffer,
-			   size_t count, loff_t *ppos)
-{
-	struct vstusb_device *vstdev;
-	int cnt = -1;
-	void *buf;
-	int retval = 0;
-
-	struct urb              *urb;
-	struct usb_device       *dev;
-	unsigned int            pipe;
-	int                     timeout;
-
-	DECLARE_COMPLETION_ONSTACK(done);
-
-	vstdev = file->private_data;
-
-	if (vstdev == NULL)
-		return -ENODEV;
-
-	/* verify that we actually want to read some data */
-	if ((count == 0) || (count > VST_MAXBUFFER))
-		return -EINVAL;
-
-	/* lock this object */
-	if (mutex_lock_interruptible(&vstdev->lock))
-		return -ERESTARTSYS;
-
-	/* anyone home */
-	if (!vstdev->present) {
-		mutex_unlock(&vstdev->lock);
-		printk(KERN_ERR KBUILD_MODNAME
-		       ": %s: device not present\n", __func__);
-		return -ENODEV;
-	}
-
-	/* pull out the necessary data */
-	dev =     vstdev->usb_dev;
-	pipe =    usb_rcvbulkpipe(dev, vstdev->rd_pipe);
-	timeout = vstdev->rd_timeout_ms;
-
-	buf = kmalloc(count, GFP_KERNEL);
-	if (buf == NULL) {
-		mutex_unlock(&vstdev->lock);
-		return -ENOMEM;
-	}
-
-	urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!urb) {
-		kfree(buf);
-		mutex_unlock(&vstdev->lock);
-		return -ENOMEM;
-	}
-
-	usb_anchor_urb(urb, &vstdev->submitted);
-	retval = vstusb_fill_and_send_urb(urb, dev, pipe, buf, count, &done);
-	mutex_unlock(&vstdev->lock);
-	if (retval) {
-		usb_unanchor_urb(urb);
-		dev_err(&dev->dev, "%s: error %d filling and sending urb %d\n",
-			__func__, retval, pipe);
-		goto exit;
-	}
-
-	retval = vstusb_complete_urb(urb, &done, timeout, &cnt);
-	if (retval) {
-		dev_err(&dev->dev, "%s: error %d completing urb %d\n",
-			__func__, retval, pipe);
-		goto exit;
-	}
-
-	if (copy_to_user(buffer, buf, cnt)) {
-		dev_err(&dev->dev, "%s: can't copy_to_user\n", __func__);
-		retval = -EFAULT;
-	} else {
-		retval = cnt;
-		dev_dbg(&dev->dev, "%s: read %d bytes from pipe %d\n",
-			__func__, cnt, pipe);
-	}
-
-exit:
-	usb_free_urb(urb);
-	kfree(buf);
-	return retval;
-}
-
-static ssize_t vstusb_write(struct file *file, const char __user *buffer,
-			    size_t count, loff_t *ppos)
-{
-	struct vstusb_device *vstdev;
-	int cnt = -1;
-	void *buf;
-	int retval = 0;
-
-	struct urb              *urb;
-	struct usb_device       *dev;
-	unsigned int            pipe;
-	int                     timeout;
-
-	DECLARE_COMPLETION_ONSTACK(done);
-
-	vstdev = file->private_data;
-
-	if (vstdev == NULL)
-		return -ENODEV;
-
-	/* verify that we actually have some data to write */
-	if ((count == 0) || (count > VST_MAXBUFFER))
-		return retval;
-
-	/* lock this object */
-	if (mutex_lock_interruptible(&vstdev->lock))
-		return -ERESTARTSYS;
-
-	/* anyone home */
-	if (!vstdev->present) {
-		mutex_unlock(&vstdev->lock);
-		printk(KERN_ERR KBUILD_MODNAME
-		       ": %s: device not present\n", __func__);
-		return -ENODEV;
-	}
-
-	/* pull out the necessary data */
-	dev =     vstdev->usb_dev;
-	pipe =    usb_sndbulkpipe(dev, vstdev->wr_pipe);
-	timeout = vstdev->wr_timeout_ms;
-
-	buf = kmalloc(count, GFP_KERNEL);
-	if (buf == NULL) {
-		mutex_unlock(&vstdev->lock);
-		return -ENOMEM;
-	}
-
-	urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!urb) {
-		kfree(buf);
-		mutex_unlock(&vstdev->lock);
-		return -ENOMEM;
-	}
-
-	if (copy_from_user(buf, buffer, count)) {
-		mutex_unlock(&vstdev->lock);
-		dev_err(&dev->dev, "%s: can't copy_from_user\n", __func__);
-		retval = -EFAULT;
-		goto exit;
-	}
-
-	usb_anchor_urb(urb, &vstdev->submitted);
-	retval = vstusb_fill_and_send_urb(urb, dev, pipe, buf, count, &done);
-	mutex_unlock(&vstdev->lock);
-	if (retval) {
-		usb_unanchor_urb(urb);
-		dev_err(&dev->dev, "%s: error %d filling and sending urb %d\n",
-			__func__, retval, pipe);
-		goto exit;
-	}
-
-	retval = vstusb_complete_urb(urb, &done, timeout, &cnt);
-	if (retval) {
-		dev_err(&dev->dev, "%s: error %d completing urb %d\n",
-			__func__, retval, pipe);
-		goto exit;
-	} else {
-		retval = cnt;
-		dev_dbg(&dev->dev, "%s: sent %d bytes to pipe %d\n",
-			__func__, cnt, pipe);
-	}
-
-exit:
-	usb_free_urb(urb);
-	kfree(buf);
-	return retval;
-}
-
-static long vstusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	int retval = 0;
-	int cnt = -1;
-	void __user *data = (void __user *)arg;
-	struct vstusb_args usb_data;
-
-	struct vstusb_device *vstdev;
-	void *buffer = NULL; /* must be initialized. buffer is
-			      *	referenced on exit but not all
-			      * ioctls allocate it */
-
-	struct urb              *urb = NULL; /* must be initialized. urb is
-					      *	referenced on exit but not all
-					      * ioctls allocate it */
-	struct usb_device       *dev;
-	unsigned int            pipe;
-	int                     timeout;
-
-	DECLARE_COMPLETION_ONSTACK(done);
-
-	vstdev = file->private_data;
-
-	if (_IOC_TYPE(cmd) != VST_IOC_MAGIC) {
-		dev_warn(&vstdev->usb_dev->dev,
-			 "%s: ioctl command %x, bad ioctl magic %x, "
-			 "expected %x\n", __func__, cmd,
-			 _IOC_TYPE(cmd), VST_IOC_MAGIC);
-		return -EINVAL;
-	}
-
-	if (vstdev == NULL)
-		return -ENODEV;
-
-	if (copy_from_user(&usb_data, data, sizeof(struct vstusb_args))) {
-		dev_err(&vstdev->usb_dev->dev, "%s: can't copy_from_user\n",
-			__func__);
-		return -EFAULT;
-	}
-
-	/* lock this object */
-	if (mutex_lock_interruptible(&vstdev->lock)) {
-		retval = -ERESTARTSYS;
-		goto exit;
-	}
-
-	/* anyone home */
-	if (!vstdev->present) {
-		mutex_unlock(&vstdev->lock);
-		dev_err(&vstdev->usb_dev->dev, "%s: device not present\n",
-			__func__);
-		retval = -ENODEV;
-		goto exit;
-	}
-
-	/* pull out the necessary data */
-	dev = vstdev->usb_dev;
-
-	switch (cmd) {
-
-	case IOCTL_VSTUSB_CONFIG_RW:
-
-		vstdev->rd_pipe = usb_data.rd_pipe;
-		vstdev->rd_timeout_ms = usb_data.rd_timeout_ms;
-		vstdev->wr_pipe = usb_data.wr_pipe;
-		vstdev->wr_timeout_ms = usb_data.wr_timeout_ms;
-
-		mutex_unlock(&vstdev->lock);
-
-		dev_dbg(&dev->dev, "%s: setting pipes/timeouts, "
-			"rdpipe = %d, rdtimeout = %d, "
-			"wrpipe = %d, wrtimeout = %d\n", __func__,
-			vstdev->rd_pipe, vstdev->rd_timeout_ms,
-			vstdev->wr_pipe, vstdev->wr_timeout_ms);
-		break;
-
-	case IOCTL_VSTUSB_SEND_PIPE:
-
-		if ((usb_data.count == 0) || (usb_data.count > VST_MAXBUFFER)) {
-			mutex_unlock(&vstdev->lock);
-			retval = -EINVAL;
-			goto exit;
-		}
-
-		buffer = kmalloc(usb_data.count, GFP_KERNEL);
-		if (buffer == NULL) {
-			mutex_unlock(&vstdev->lock);
-			retval = -ENOMEM;
-			goto exit;
-		}
-
-		urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!urb) {
-			mutex_unlock(&vstdev->lock);
-			retval = -ENOMEM;
-			goto exit;
-		}
-
-		timeout = usb_data.timeout_ms;
-
-		pipe = usb_sndbulkpipe(dev, usb_data.pipe);
-
-		if (copy_from_user(buffer, usb_data.buffer, usb_data.count)) {
-			dev_err(&dev->dev, "%s: can't copy_from_user\n",
-				__func__);
-			mutex_unlock(&vstdev->lock);
-			retval = -EFAULT;
-			goto exit;
-		}
-
-		usb_anchor_urb(urb, &vstdev->submitted);
-		retval = vstusb_fill_and_send_urb(urb, dev, pipe, buffer,
-						  usb_data.count, &done);
-		mutex_unlock(&vstdev->lock);
-		if (retval) {
-			usb_unanchor_urb(urb);
-			dev_err(&dev->dev,
-				"%s: error %d filling and sending urb %d\n",
-				__func__, retval, pipe);
-			goto exit;
-		}
-
-		retval = vstusb_complete_urb(urb, &done, timeout, &cnt);
-		if (retval) {
-			dev_err(&dev->dev, "%s: error %d completing urb %d\n",
-				__func__, retval, pipe);
-		}
-
-		break;
-	case IOCTL_VSTUSB_RECV_PIPE:
-
-		if ((usb_data.count == 0) || (usb_data.count > VST_MAXBUFFER)) {
-			mutex_unlock(&vstdev->lock);
-			retval = -EINVAL;
-			goto exit;
-		}
-
-		buffer = kmalloc(usb_data.count, GFP_KERNEL);
-		if (buffer == NULL) {
-			mutex_unlock(&vstdev->lock);
-			retval = -ENOMEM;
-			goto exit;
-		}
-
-		urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!urb) {
-			mutex_unlock(&vstdev->lock);
-			retval = -ENOMEM;
-			goto exit;
-		}
-
-		timeout = usb_data.timeout_ms;
-
-		pipe = usb_rcvbulkpipe(dev, usb_data.pipe);
-
-		usb_anchor_urb(urb, &vstdev->submitted);
-		retval = vstusb_fill_and_send_urb(urb, dev, pipe, buffer,
-						  usb_data.count, &done);
-		mutex_unlock(&vstdev->lock);
-		if (retval) {
-			usb_unanchor_urb(urb);
-			dev_err(&dev->dev,
-				"%s: error %d filling and sending urb %d\n",
-				__func__, retval, pipe);
-			goto exit;
-		}
-
-		retval = vstusb_complete_urb(urb, &done, timeout, &cnt);
-		if (retval) {
-			dev_err(&dev->dev, "%s: error %d completing urb %d\n",
-				__func__, retval, pipe);
-			goto exit;
-		}
-
-		if (copy_to_user(usb_data.buffer, buffer, cnt)) {
-			dev_err(&dev->dev, "%s: can't copy_to_user\n",
-				__func__);
-			retval = -EFAULT;
-			goto exit;
-		}
-
-		usb_data.count = cnt;
-		if (copy_to_user(data, &usb_data, sizeof(struct vstusb_args))) {
-			dev_err(&dev->dev, "%s: can't copy_to_user\n",
-				__func__);
-			retval = -EFAULT;
-		} else {
-			dev_dbg(&dev->dev, "%s: recv %zd bytes from pipe %d\n",
-				__func__, usb_data.count, usb_data.pipe);
-		}
-
-		break;
-
-	default:
-		mutex_unlock(&vstdev->lock);
-		dev_warn(&dev->dev, "ioctl_vstusb: invalid ioctl cmd %x\n",
-			 cmd);
-		return -EINVAL;
-		break;
-	}
-exit:
-	usb_free_urb(urb);
-	kfree(buffer);
-	return retval;
-}
-
-static const struct file_operations vstusb_fops = {
-	.owner =                THIS_MODULE,
-	.read =                 vstusb_read,
-	.write =                vstusb_write,
-	.unlocked_ioctl =       vstusb_ioctl,
-	.compat_ioctl =         vstusb_ioctl,
-	.open =                 vstusb_open,
-	.release =              vstusb_release,
-};
-
-static struct usb_class_driver usb_vstusb_class = {
-	.name =         "usb/vstusb%d",
-	.fops =         &vstusb_fops,
-	.minor_base =   VSTUSB_MINOR_BASE,
-};
-
-static int vstusb_probe(struct usb_interface *intf,
-			const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct vstusb_device *vstdev;
-	int i;
-	int retval = 0;
-
-	/* allocate memory for our device state and intialize it */
-
-	vstdev = kzalloc(sizeof(*vstdev), GFP_KERNEL);
-	if (vstdev == NULL)
-		return -ENOMEM;
-
-	/* must do usb_get_dev() prior to kref_init() since the kref_put()
-	 * release function will do a usb_put_dev() */
-	usb_get_dev(dev);
-	kref_init(&vstdev->kref);
-	mutex_init(&vstdev->lock);
-
-	i = dev->descriptor.bcdDevice;
-
-	dev_dbg(&intf->dev, "Version %1d%1d.%1d%1d found at address %d\n",
-		(i & 0xF000) >> 12, (i & 0xF00) >> 8,
-		(i & 0xF0) >> 4, (i & 0xF), dev->devnum);
-
-	vstdev->present = 1;
-	vstdev->isopen = 0;
-	vstdev->usb_dev = dev;
-	init_usb_anchor(&vstdev->submitted);
-
-	usb_set_intfdata(intf, vstdev);
-	retval = usb_register_dev(intf, &usb_vstusb_class);
-	if (retval) {
-		dev_err(&intf->dev,
-			"%s: Not able to get a minor for this device.\n",
-			__func__);
-		usb_set_intfdata(intf, NULL);
-		kref_put(&vstdev->kref, vstusb_delete);
-		return retval;
-	}
-
-	/* let the user know what node this device is now attached to */
-	dev_info(&intf->dev,
-		 "VST USB Device #%d now attached to major %d minor %d\n",
-		 (intf->minor - VSTUSB_MINOR_BASE), USB_MAJOR, intf->minor);
-
-	dev_info(&intf->dev, "%s, %s\n", DRIVER_DESC, DRIVER_VERSION);
-
-	return retval;
-}
-
-static void vstusb_disconnect(struct usb_interface *intf)
-{
-	struct vstusb_device *vstdev = usb_get_intfdata(intf);
-
-	usb_deregister_dev(intf, &usb_vstusb_class);
-	usb_set_intfdata(intf, NULL);
-
-	if (vstdev) {
-
-		mutex_lock(&vstdev->lock);
-		vstdev->present = 0;
-
-		usb_kill_anchored_urbs(&vstdev->submitted);
-
-		mutex_unlock(&vstdev->lock);
-
-		kref_put(&vstdev->kref, vstusb_delete);
-	}
-
-}
-
-static int vstusb_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct vstusb_device *vstdev = usb_get_intfdata(intf);
-	int time;
-	if (!vstdev)
-		return 0;
-
-	mutex_lock(&vstdev->lock);
-	time = usb_wait_anchor_empty_timeout(&vstdev->submitted, 1000);
-	if (!time)
-		usb_kill_anchored_urbs(&vstdev->submitted);
-	mutex_unlock(&vstdev->lock);
-
-	return 0;
-}
-
-static int vstusb_resume(struct usb_interface *intf)
-{
-	return 0;
-}
-
-static struct usb_driver vstusb_driver = {
-	.name =         "vstusb",
-	.probe =        vstusb_probe,
-	.disconnect =   vstusb_disconnect,
-	.suspend =      vstusb_suspend,
-	.resume =       vstusb_resume,
-	.id_table = id_table,
-};
-
-static int __init vstusb_init(void)
-{
-	int rc;
-
-	rc = usb_register(&vstusb_driver);
-	if (rc)
-		printk(KERN_ERR "%s: failed to register (%d)", __func__, rc);
-
-	return rc;
-}
-
-static void __exit vstusb_exit(void)
-{
-	usb_deregister(&vstusb_driver);
-}
-
-module_init(vstusb_init);
-module_exit(vstusb_exit);
-
-MODULE_AUTHOR("Dennis O'Brien/Stephen Ware");
-MODULE_DESCRIPTION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 385ec0520167..6dd44bc1f5ff 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -460,8 +460,8 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
     char ev_type, int status)
 {
 	const struct usb_endpoint_descriptor *epd = &urb->ep->desc;
-	unsigned long flags;
 	struct timeval ts;
+	unsigned long flags;
 	unsigned int urb_length;
 	unsigned int offset;
 	unsigned int length;
@@ -600,10 +600,13 @@ static void mon_bin_complete(void *data, struct urb *urb, int status)
 static void mon_bin_error(void *data, struct urb *urb, int error)
 {
 	struct mon_reader_bin *rp = data;
+	struct timeval ts;
 	unsigned long flags;
 	unsigned int offset;
 	struct mon_bin_hdr *ep;
 
+	do_gettimeofday(&ts);
+
 	spin_lock_irqsave(&rp->b_lock, flags);
 
 	offset = mon_buff_area_alloc(rp, PKT_SIZE);
@@ -623,6 +626,8 @@ static void mon_bin_error(void *data, struct urb *urb, int error)
 	ep->devnum = urb->dev->devnum;
 	ep->busnum = urb->dev->bus->busnum;
 	ep->id = (unsigned long) urb;
+	ep->ts_sec = ts.tv_sec;
+	ep->ts_usec = ts.tv_usec;
 	ep->status = error;
 
 	ep->flag_setup = '-';
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 047568ff223d..31c11888ec6a 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -180,7 +180,7 @@ static inline unsigned int mon_get_timestamp(void)
 	unsigned int stamp;
 
 	do_gettimeofday(&tval);
-	stamp = tval.tv_sec & 0xFFFF;	/* 2^32 = 4294967296. Limit to 4096s. */
+	stamp = tval.tv_sec & 0xFFF;	/* 2^32 = 4294967296. Limit to 4096s. */
 	stamp = stamp * 1000000 + tval.tv_usec;
 	return stamp;
 }
@@ -273,12 +273,12 @@ static void mon_text_error(void *data, struct urb *urb, int error)
 
 	ep->type = 'E';
 	ep->id = (unsigned long) urb;
-	ep->busnum = 0;
+	ep->busnum = urb->dev->bus->busnum;
 	ep->devnum = urb->dev->devnum;
 	ep->epnum = usb_endpoint_num(&urb->ep->desc);
 	ep->xfertype = usb_endpoint_type(&urb->ep->desc);
 	ep->is_in = usb_urb_dir_in(urb);
-	ep->tstamp = 0;
+	ep->tstamp = mon_get_timestamp();
 	ep->length = 0;
 	ep->status = error;
 
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index ad26e6569665..bcee1339d4fd 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -30,7 +30,6 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 	void __iomem *fifo = hw_ep->fifo;
 	void __iomem *epio = hw_ep->regs;
 	u8 epnum = hw_ep->epnum;
-	u16 dma_reg = 0;
 
 	prefetch((u8 *)src);
 
@@ -42,15 +41,17 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 	dump_fifo_data(src, len);
 
 	if (!ANOMALY_05000380 && epnum != 0) {
-		flush_dcache_range((unsigned int)src,
-			(unsigned int)(src + len));
+		u16 dma_reg;
+
+		flush_dcache_range((unsigned long)src,
+			(unsigned long)(src + len));
 
 		/* Setup DMA address register */
-		dma_reg = (u16) ((u32) src & 0xFFFF);
+		dma_reg = (u32)src;
 		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
 		SSYNC();
 
-		dma_reg = (u16) (((u32) src >> 16) & 0xFFFF);
+		dma_reg = (u32)src >> 16;
 		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
 		SSYNC();
 
@@ -79,12 +80,9 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 		SSYNC();
 
 		if (unlikely((unsigned long)src & 0x01))
-			outsw_8((unsigned long)fifo, src,
-				len & 0x01 ? (len >> 1) + 1 : len >> 1);
+			outsw_8((unsigned long)fifo, src, (len + 1) >> 1);
 		else
-			outsw((unsigned long)fifo, src,
-				len & 0x01 ? (len >> 1) + 1 : len >> 1);
-
+			outsw((unsigned long)fifo, src, (len + 1) >> 1);
 	}
 }
 /*
@@ -94,19 +92,19 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 {
 	void __iomem *fifo = hw_ep->fifo;
 	u8 epnum = hw_ep->epnum;
-	u16 dma_reg = 0;
 
 	if (ANOMALY_05000467 && epnum != 0) {
+		u16 dma_reg;
 
-		invalidate_dcache_range((unsigned int)dst,
-			(unsigned int)(dst + len));
+		invalidate_dcache_range((unsigned long)dst,
+			(unsigned long)(dst + len));
 
 		/* Setup DMA address register */
-		dma_reg = (u16) ((u32) dst & 0xFFFF);
+		dma_reg = (u32)dst;
 		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
 		SSYNC();
 
-		dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF);
+		dma_reg = (u32)dst >> 16;
 		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
 		SSYNC();
 
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index a44a450c860d..3c69a76ec392 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1191,8 +1191,13 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 
 		bd = tx_ch->head;
 
+		/*
+		 * If Head is null then this could mean that a abort interrupt
+		 * that needs to be acknowledged.
+		 */
 		if (NULL == bd) {
 			DBG(1, "null BD\n");
+			tx_ram->tx_complete = 0;
 			continue;
 		}
 
@@ -1412,15 +1417,6 @@ static int cppi_channel_abort(struct dma_channel *channel)
 
 	if (cppi_ch->transmit) {
 		struct cppi_tx_stateram __iomem *tx_ram;
-		int			enabled;
-
-		/* mask interrupts raised to signal teardown complete.  */
-		enabled = musb_readl(tibase, DAVINCI_TXCPPI_INTENAB_REG)
-				& (1 << cppi_ch->index);
-		if (enabled)
-			musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
-					(1 << cppi_ch->index));
-
 		/* REVISIT put timeouts on these controller handshakes */
 
 		cppi_dump_tx(6, cppi_ch, " (teardown)");
@@ -1435,7 +1431,6 @@ static int cppi_channel_abort(struct dma_channel *channel)
 		do {
 			value = musb_readl(&tx_ram->tx_complete, 0);
 		} while (0xFFFFFFFC != value);
-		musb_writel(&tx_ram->tx_complete, 0, 0xFFFFFFFC);
 
 		/* FIXME clean up the transfer state ... here?
 		 * the completion routine should get called with
@@ -1448,23 +1443,15 @@ static int cppi_channel_abort(struct dma_channel *channel)
 		musb_writew(regs, MUSB_TXCSR, value);
 		musb_writew(regs, MUSB_TXCSR, value);
 
-		/* While we scrub the TX state RAM, ensure that we clean
-		 * up any interrupt that's currently asserted:
+		/*
 		 * 1. Write to completion Ptr value 0x1(bit 0 set)
 		 *    (write back mode)
-		 * 2. Write to completion Ptr value 0x0(bit 0 cleared)
-		 *    (compare mode)
-		 * Value written is compared(for bits 31:2) and when
-		 * equal, interrupt is deasserted.
+		 * 2. Wait for abort interrupt and then put the channel in
+		 *    compare mode by writing 1 to the tx_complete register.
 		 */
 		cppi_reset_tx(tx_ram, 1);
-		musb_writel(&tx_ram->tx_complete, 0, 0);
-
-		/* re-enable interrupt */
-		if (enabled)
-			musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
-					(1 << cppi_ch->index));
-
+		cppi_ch->head = 0;
+		musb_writel(&tx_ram->tx_complete, 0, 1);
 		cppi_dump_tx(5, cppi_ch, " (done teardown)");
 
 		/* REVISIT tx side _should_ clean up the same way
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 738efd8063b5..b4bbf8f2c238 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -557,6 +557,69 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		handled = IRQ_HANDLED;
 	}
 
+
+	if (int_usb & MUSB_INTR_SUSPEND) {
+		DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
+				otg_state_string(musb), devctl, power);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv->state) {
+#ifdef	CONFIG_USB_MUSB_OTG
+		case OTG_STATE_A_PERIPHERAL:
+			/* We also come here if the cable is removed, since
+			 * this silicon doesn't report ID-no-longer-grounded.
+			 *
+			 * We depend on T(a_wait_bcon) to shut us down, and
+			 * hope users don't do anything dicey during this
+			 * undesired detour through A_WAIT_BCON.
+			 */
+			musb_hnp_stop(musb);
+			usb_hcd_resume_root_hub(musb_to_hcd(musb));
+			musb_root_disconnect(musb);
+			musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon
+						? : OTG_TIME_A_WAIT_BCON));
+
+			break;
+#endif
+		case OTG_STATE_B_IDLE:
+			if (!musb->is_active)
+				break;
+		case OTG_STATE_B_PERIPHERAL:
+			musb_g_suspend(musb);
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv->gadget->b_hnp_enable;
+			if (musb->is_active) {
+#ifdef	CONFIG_USB_MUSB_OTG
+				musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
+				DBG(1, "HNP: Setting timer for b_ase0_brst\n");
+				mod_timer(&musb->otg_timer, jiffies
+					+ msecs_to_jiffies(
+							OTG_TIME_B_ASE0_BRST));
+#endif
+			}
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (musb->a_wait_bcon != 0)
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+		case OTG_STATE_A_HOST:
+			musb->xceiv->state = OTG_STATE_A_SUSPEND;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv->host->b_hnp_enable;
+			break;
+		case OTG_STATE_B_HOST:
+			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
+			DBG(1, "REVISIT: SUSPEND as B_HOST\n");
+			break;
+		default:
+			/* "should not happen" */
+			musb->is_active = 0;
+			break;
+		}
+	}
+
 	if (int_usb & MUSB_INTR_CONNECT) {
 		struct usb_hcd *hcd = musb_to_hcd(musb);
 
@@ -625,10 +688,61 @@ b_host:
 	}
 #endif	/* CONFIG_USB_MUSB_HDRC_HCD */
 
+	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
+		DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n",
+				otg_state_string(musb),
+				MUSB_MODE(musb), devctl);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv->state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		case OTG_STATE_A_HOST:
+		case OTG_STATE_A_SUSPEND:
+			usb_hcd_resume_root_hub(musb_to_hcd(musb));
+			musb_root_disconnect(musb);
+			if (musb->a_wait_bcon != 0 && is_otg_enabled(musb))
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+#endif	/* HOST */
+#ifdef CONFIG_USB_MUSB_OTG
+		case OTG_STATE_B_HOST:
+			/* REVISIT this behaves for "real disconnect"
+			 * cases; make sure the other transitions from
+			 * from B_HOST act right too.  The B_HOST code
+			 * in hnp_stop() is currently not used...
+			 */
+			musb_root_disconnect(musb);
+			musb_to_hcd(musb)->self.is_b_host = 0;
+			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+			MUSB_DEV_MODE(musb);
+			musb_g_disconnect(musb);
+			break;
+		case OTG_STATE_A_PERIPHERAL:
+			musb_hnp_stop(musb);
+			musb_root_disconnect(musb);
+			/* FALLTHROUGH */
+		case OTG_STATE_B_WAIT_ACON:
+			/* FALLTHROUGH */
+#endif	/* OTG */
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		case OTG_STATE_B_PERIPHERAL:
+		case OTG_STATE_B_IDLE:
+			musb_g_disconnect(musb);
+			break;
+#endif	/* GADGET */
+		default:
+			WARNING("unhandled DISCONNECT transition (%s)\n",
+				otg_state_string(musb));
+			break;
+		}
+	}
+
 	/* mentor saves a bit: bus reset and babble share the same irq.
 	 * only host sees babble; only peripheral sees bus reset.
 	 */
 	if (int_usb & MUSB_INTR_RESET) {
+		handled = IRQ_HANDLED;
 		if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) {
 			/*
 			 * Looks like non-HS BABBLE can be ignored, but
@@ -641,7 +755,7 @@ b_host:
 				DBG(1, "BABBLE devctl: %02x\n", devctl);
 			else {
 				ERR("Stopping host session -- babble\n");
-				musb_writeb(mbase, MUSB_DEVCTL, 0);
+				musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 			}
 		} else if (is_peripheral_capable()) {
 			DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
@@ -686,29 +800,7 @@ b_host:
 					otg_state_string(musb));
 			}
 		}
-
-		handled = IRQ_HANDLED;
 	}
-	schedule_work(&musb->irq_work);
-
-	return handled;
-}
-
-/*
- * Interrupt Service Routine to record USB "global" interrupts.
- * Since these do not happen often and signify things of
- * paramount importance, it seems OK to check them individually;
- * the order of the tests is specified in the manual
- *
- * @param musb instance pointer
- * @param int_usb register contents
- * @param devctl
- * @param power
- */
-static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
-				u8 devctl, u8 power)
-{
-	irqreturn_t handled = IRQ_NONE;
 
 #if 0
 /* REVISIT ... this would be for multiplexing periodic endpoints, or
@@ -755,117 +847,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
 	}
 #endif
 
-	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
-		DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n",
-				otg_state_string(musb),
-				MUSB_MODE(musb), devctl);
-		handled = IRQ_HANDLED;
-
-		switch (musb->xceiv->state) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-		case OTG_STATE_A_HOST:
-		case OTG_STATE_A_SUSPEND:
-			usb_hcd_resume_root_hub(musb_to_hcd(musb));
-			musb_root_disconnect(musb);
-			if (musb->a_wait_bcon != 0 && is_otg_enabled(musb))
-				musb_platform_try_idle(musb, jiffies
-					+ msecs_to_jiffies(musb->a_wait_bcon));
-			break;
-#endif	/* HOST */
-#ifdef CONFIG_USB_MUSB_OTG
-		case OTG_STATE_B_HOST:
-			/* REVISIT this behaves for "real disconnect"
-			 * cases; make sure the other transitions from
-			 * from B_HOST act right too.  The B_HOST code
-			 * in hnp_stop() is currently not used...
-			 */
-			musb_root_disconnect(musb);
-			musb_to_hcd(musb)->self.is_b_host = 0;
-			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
-			MUSB_DEV_MODE(musb);
-			musb_g_disconnect(musb);
-			break;
-		case OTG_STATE_A_PERIPHERAL:
-			musb_hnp_stop(musb);
-			musb_root_disconnect(musb);
-			/* FALLTHROUGH */
-		case OTG_STATE_B_WAIT_ACON:
-			/* FALLTHROUGH */
-#endif	/* OTG */
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-		case OTG_STATE_B_PERIPHERAL:
-		case OTG_STATE_B_IDLE:
-			musb_g_disconnect(musb);
-			break;
-#endif	/* GADGET */
-		default:
-			WARNING("unhandled DISCONNECT transition (%s)\n",
-				otg_state_string(musb));
-			break;
-		}
-
-		schedule_work(&musb->irq_work);
-	}
-
-	if (int_usb & MUSB_INTR_SUSPEND) {
-		DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
-				otg_state_string(musb), devctl, power);
-		handled = IRQ_HANDLED;
-
-		switch (musb->xceiv->state) {
-#ifdef	CONFIG_USB_MUSB_OTG
-		case OTG_STATE_A_PERIPHERAL:
-			/* We also come here if the cable is removed, since
-			 * this silicon doesn't report ID-no-longer-grounded.
-			 *
-			 * We depend on T(a_wait_bcon) to shut us down, and
-			 * hope users don't do anything dicey during this
-			 * undesired detour through A_WAIT_BCON.
-			 */
-			musb_hnp_stop(musb);
-			usb_hcd_resume_root_hub(musb_to_hcd(musb));
-			musb_root_disconnect(musb);
-			musb_platform_try_idle(musb, jiffies
-					+ msecs_to_jiffies(musb->a_wait_bcon
-						? : OTG_TIME_A_WAIT_BCON));
-			break;
-#endif
-		case OTG_STATE_B_PERIPHERAL:
-			musb_g_suspend(musb);
-			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv->gadget->b_hnp_enable;
-			if (musb->is_active) {
-#ifdef	CONFIG_USB_MUSB_OTG
-				musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
-				DBG(1, "HNP: Setting timer for b_ase0_brst\n");
-				mod_timer(&musb->otg_timer, jiffies
-					+ msecs_to_jiffies(
-							OTG_TIME_B_ASE0_BRST));
-#endif
-			}
-			break;
-		case OTG_STATE_A_WAIT_BCON:
-			if (musb->a_wait_bcon != 0)
-				musb_platform_try_idle(musb, jiffies
-					+ msecs_to_jiffies(musb->a_wait_bcon));
-			break;
-		case OTG_STATE_A_HOST:
-			musb->xceiv->state = OTG_STATE_A_SUSPEND;
-			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv->host->b_hnp_enable;
-			break;
-		case OTG_STATE_B_HOST:
-			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
-			DBG(1, "REVISIT: SUSPEND as B_HOST\n");
-			break;
-		default:
-			/* "should not happen" */
-			musb->is_active = 0;
-			break;
-		}
-		schedule_work(&musb->irq_work);
-	}
-
+	schedule_work(&musb->irq_work);
 
 	return handled;
 }
@@ -1095,6 +1077,36 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
 { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
 };
 
+/* mode 5 - fits in 8KB */
+static struct fifo_cfg __initdata mode_5_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
 
 /*
  * configure a fifo; for non-shared endpoints, this may be called
@@ -1210,6 +1222,10 @@ static int __init ep_config_from_table(struct musb *musb)
 		cfg = mode_4_cfg;
 		n = ARRAY_SIZE(mode_4_cfg);
 		break;
+	case 5:
+		cfg = mode_5_cfg;
+		n = ARRAY_SIZE(mode_5_cfg);
+		break;
 	}
 
 	printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
@@ -1314,9 +1330,6 @@ enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
  */
 static int __init musb_core_init(u16 musb_type, struct musb *musb)
 {
-#ifdef MUSB_AHB_ID
-	u32 data;
-#endif
 	u8 reg;
 	char *type;
 	char aInfo[90], aRevision[32], aDate[12];
@@ -1328,23 +1341,17 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 	reg = musb_read_configdata(mbase);
 
 	strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
-	if (reg & MUSB_CONFIGDATA_DYNFIFO)
+	if (reg & MUSB_CONFIGDATA_DYNFIFO) {
 		strcat(aInfo, ", dyn FIFOs");
+		musb->dyn_fifo = true;
+	}
 	if (reg & MUSB_CONFIGDATA_MPRXE) {
 		strcat(aInfo, ", bulk combine");
-#ifdef C_MP_RX
 		musb->bulk_combine = true;
-#else
-		strcat(aInfo, " (X)");		/* no driver support */
-#endif
 	}
 	if (reg & MUSB_CONFIGDATA_MPTXE) {
 		strcat(aInfo, ", bulk split");
-#ifdef C_MP_TX
 		musb->bulk_split = true;
-#else
-		strcat(aInfo, " (X)");		/* no driver support */
-#endif
 	}
 	if (reg & MUSB_CONFIGDATA_HBRXE) {
 		strcat(aInfo, ", HB-ISO Rx");
@@ -1360,20 +1367,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 	printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n",
 			musb_driver_name, reg, aInfo);
 
-#ifdef MUSB_AHB_ID
-	data = musb_readl(mbase, 0x404);
-	sprintf(aDate, "%04d-%02x-%02x", (data & 0xffff),
-		(data >> 16) & 0xff, (data >> 24) & 0xff);
-	/* FIXME ID2 and ID3 are unused */
-	data = musb_readl(mbase, 0x408);
-	printk(KERN_DEBUG "ID2=%lx\n", (long unsigned)data);
-	data = musb_readl(mbase, 0x40c);
-	printk(KERN_DEBUG "ID3=%lx\n", (long unsigned)data);
-	reg = musb_readb(mbase, 0x400);
-	musb_type = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC;
-#else
 	aDate[0] = 0;
-#endif
 	if (MUSB_CONTROLLER_MHDRC == musb_type) {
 		musb->is_multipoint = 1;
 		type = "M";
@@ -1404,21 +1398,10 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 	musb->nr_endpoints = 1;
 	musb->epmask = 1;
 
-	if (reg & MUSB_CONFIGDATA_DYNFIFO) {
-		if (musb->config->dyn_fifo)
-			status = ep_config_from_table(musb);
-		else {
-			ERR("reconfigure software for Dynamic FIFOs\n");
-			status = -ENODEV;
-		}
-	} else {
-		if (!musb->config->dyn_fifo)
-			status = ep_config_from_hw(musb);
-		else {
-			ERR("reconfigure software for static FIFOs\n");
-			return -ENODEV;
-		}
-	}
+	if (musb->dyn_fifo)
+		status = ep_config_from_table(musb);
+	else
+		status = ep_config_from_hw(musb);
 
 	if (status < 0)
 		return status;
@@ -1587,11 +1570,6 @@ irqreturn_t musb_interrupt(struct musb *musb)
 		ep_num++;
 	}
 
-	/* finish handling "global" interrupts after handling fifos */
-	if (musb->int_usb)
-		retval |= musb_stage2_irq(musb,
-				musb->int_usb, devctl, power);
-
 	return retval;
 }
 
@@ -1696,7 +1674,7 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr,
 	unsigned long	val;
 
 	if (sscanf(buf, "%lu", &val) < 1) {
-		printk(KERN_ERR "Invalid VBUS timeout ms value\n");
+		dev_err(dev, "Invalid VBUS timeout ms value\n");
 		return -EINVAL;
 	}
 
@@ -1746,7 +1724,7 @@ musb_srp_store(struct device *dev, struct device_attribute *attr,
 
 	if (sscanf(buf, "%hu", &srp) != 1
 			|| (srp != 1)) {
-		printk(KERN_ERR "SRP: Value must be 1\n");
+		dev_err(dev, "SRP: Value must be 1\n");
 		return -EINVAL;
 	}
 
@@ -1759,6 +1737,19 @@ static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store);
 
 #endif /* CONFIG_USB_GADGET_MUSB_HDRC */
 
+static struct attribute *musb_attributes[] = {
+	&dev_attr_mode.attr,
+	&dev_attr_vbus.attr,
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	&dev_attr_srp.attr,
+#endif
+	NULL
+};
+
+static const struct attribute_group musb_attr_group = {
+	.attrs = musb_attributes,
+};
+
 #endif	/* sysfs */
 
 /* Only used to provide driver mode change events */
@@ -1833,11 +1824,7 @@ static void musb_free(struct musb *musb)
 	 */
 
 #ifdef CONFIG_SYSFS
-	device_remove_file(musb->controller, &dev_attr_mode);
-	device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-	device_remove_file(musb->controller, &dev_attr_srp);
-#endif
+	sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
 #endif
 
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
@@ -2017,22 +2004,10 @@ bad_config:
 		musb->irq_wake = 0;
 	}
 
-	pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n",
-			musb_driver_name,
-			({char *s;
-			switch (musb->board_mode) {
-			case MUSB_HOST:		s = "Host"; break;
-			case MUSB_PERIPHERAL:	s = "Peripheral"; break;
-			default:		s = "OTG"; break;
-			}; s; }),
-			ctrl,
-			(is_dma_capable() && musb->dma_controller)
-				? "DMA" : "PIO",
-			musb->nIrq);
-
 	/* host side needs more setup */
 	if (is_host_enabled(musb)) {
 		struct usb_hcd	*hcd = musb_to_hcd(musb);
+		u8 busctl;
 
 		otg_set_host(musb->xceiv, &hcd->self);
 
@@ -2040,6 +2015,13 @@ bad_config:
 			hcd->self.otg_port = 1;
 		musb->xceiv->host = &hcd->self;
 		hcd->power_budget = 2 * (plat->power ? : 250);
+
+		/* program PHY to use external vBus if required */
+		if (plat->extvbus) {
+			busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL);
+			busctl |= MUSB_ULPI_USE_EXTVBUS;
+			musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl);
+		}
 	}
 
 	/* For the host-only role, we can activate right away.
@@ -2079,26 +2061,26 @@ bad_config:
 	}
 
 #ifdef CONFIG_SYSFS
-	status = device_create_file(dev, &dev_attr_mode);
-	status = device_create_file(dev, &dev_attr_vbus);
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-	status = device_create_file(dev, &dev_attr_srp);
-#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
-	status = 0;
+	status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
 #endif
 	if (status)
 		goto fail2;
 
+	dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
+			({char *s;
+			 switch (musb->board_mode) {
+			 case MUSB_HOST:		s = "Host"; break;
+			 case MUSB_PERIPHERAL:	s = "Peripheral"; break;
+			 default:		s = "OTG"; break;
+			 }; s; }),
+			ctrl,
+			(is_dma_capable() && musb->dma_controller)
+			? "DMA" : "PIO",
+			musb->nIrq);
+
 	return 0;
 
 fail2:
-#ifdef CONFIG_SYSFS
-	device_remove_file(musb->controller, &dev_attr_mode);
-	device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-	device_remove_file(musb->controller, &dev_attr_srp);
-#endif
-#endif
 	musb_platform_exit(musb);
 fail:
 	dev_err(musb->controller,
@@ -2127,6 +2109,7 @@ static int __init musb_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	int		irq = platform_get_irq(pdev, 0);
+	int		status;
 	struct resource	*iomem;
 	void __iomem	*base;
 
@@ -2134,7 +2117,7 @@ static int __init musb_probe(struct platform_device *pdev)
 	if (!iomem || irq == 0)
 		return -ENODEV;
 
-	base = ioremap(iomem->start, iomem->end - iomem->start + 1);
+	base = ioremap(iomem->start, resource_size(iomem));
 	if (!base) {
 		dev_err(dev, "ioremap failed\n");
 		return -ENOMEM;
@@ -2144,7 +2127,12 @@ static int __init musb_probe(struct platform_device *pdev)
 	/* clobbered by use_dma=n */
 	orig_dma_mask = dev->dma_mask;
 #endif
-	return musb_init_controller(dev, irq, base);
+
+	status = musb_init_controller(dev, irq, base);
+	if (status < 0)
+		iounmap(base);
+
+	return status;
 }
 
 static int __exit musb_remove(struct platform_device *pdev)
@@ -2173,6 +2161,148 @@ static int __exit musb_remove(struct platform_device *pdev)
 
 #ifdef	CONFIG_PM
 
+static struct musb_context_registers musb_context;
+
+void musb_save_context(struct musb *musb)
+{
+	int i;
+	void __iomem *musb_base = musb->mregs;
+
+	if (is_host_enabled(musb)) {
+		musb_context.frame = musb_readw(musb_base, MUSB_FRAME);
+		musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
+	}
+	musb_context.power = musb_readb(musb_base, MUSB_POWER);
+	musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
+	musb_context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
+	musb_context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
+	musb_context.index = musb_readb(musb_base, MUSB_INDEX);
+	musb_context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
+
+	for (i = 0; i < MUSB_C_NUM_EPS; ++i) {
+		musb_writeb(musb_base, MUSB_INDEX, i);
+		musb_context.index_regs[i].txmaxp =
+			musb_readw(musb_base, 0x10 + MUSB_TXMAXP);
+		musb_context.index_regs[i].txcsr =
+			musb_readw(musb_base, 0x10 + MUSB_TXCSR);
+		musb_context.index_regs[i].rxmaxp =
+			musb_readw(musb_base, 0x10 + MUSB_RXMAXP);
+		musb_context.index_regs[i].rxcsr =
+			musb_readw(musb_base, 0x10 + MUSB_RXCSR);
+
+		if (musb->dyn_fifo) {
+			musb_context.index_regs[i].txfifoadd =
+					musb_read_txfifoadd(musb_base);
+			musb_context.index_regs[i].rxfifoadd =
+					musb_read_rxfifoadd(musb_base);
+			musb_context.index_regs[i].txfifosz =
+					musb_read_txfifosz(musb_base);
+			musb_context.index_regs[i].rxfifosz =
+					musb_read_rxfifosz(musb_base);
+		}
+		if (is_host_enabled(musb)) {
+			musb_context.index_regs[i].txtype =
+				musb_readb(musb_base, 0x10 + MUSB_TXTYPE);
+			musb_context.index_regs[i].txinterval =
+				musb_readb(musb_base, 0x10 + MUSB_TXINTERVAL);
+			musb_context.index_regs[i].rxtype =
+				musb_readb(musb_base, 0x10 + MUSB_RXTYPE);
+			musb_context.index_regs[i].rxinterval =
+				musb_readb(musb_base, 0x10 + MUSB_RXINTERVAL);
+
+			musb_context.index_regs[i].txfunaddr =
+				musb_read_txfunaddr(musb_base, i);
+			musb_context.index_regs[i].txhubaddr =
+				musb_read_txhubaddr(musb_base, i);
+			musb_context.index_regs[i].txhubport =
+				musb_read_txhubport(musb_base, i);
+
+			musb_context.index_regs[i].rxfunaddr =
+				musb_read_rxfunaddr(musb_base, i);
+			musb_context.index_regs[i].rxhubaddr =
+				musb_read_rxhubaddr(musb_base, i);
+			musb_context.index_regs[i].rxhubport =
+				musb_read_rxhubport(musb_base, i);
+		}
+	}
+
+	musb_writeb(musb_base, MUSB_INDEX, musb_context.index);
+
+	musb_platform_save_context(musb, &musb_context);
+}
+
+void musb_restore_context(struct musb *musb)
+{
+	int i;
+	void __iomem *musb_base = musb->mregs;
+	void __iomem *ep_target_regs;
+
+	musb_platform_restore_context(musb, &musb_context);
+
+	if (is_host_enabled(musb)) {
+		musb_writew(musb_base, MUSB_FRAME, musb_context.frame);
+		musb_writeb(musb_base, MUSB_TESTMODE, musb_context.testmode);
+	}
+	musb_writeb(musb_base, MUSB_POWER, musb_context.power);
+	musb_writew(musb_base, MUSB_INTRTXE, musb_context.intrtxe);
+	musb_writew(musb_base, MUSB_INTRRXE, musb_context.intrrxe);
+	musb_writeb(musb_base, MUSB_INTRUSBE, musb_context.intrusbe);
+	musb_writeb(musb_base, MUSB_DEVCTL, musb_context.devctl);
+
+	for (i = 0; i < MUSB_C_NUM_EPS; ++i) {
+		musb_writeb(musb_base, MUSB_INDEX, i);
+		musb_writew(musb_base, 0x10 + MUSB_TXMAXP,
+			musb_context.index_regs[i].txmaxp);
+		musb_writew(musb_base, 0x10 + MUSB_TXCSR,
+			musb_context.index_regs[i].txcsr);
+		musb_writew(musb_base, 0x10 + MUSB_RXMAXP,
+			musb_context.index_regs[i].rxmaxp);
+		musb_writew(musb_base, 0x10 + MUSB_RXCSR,
+			musb_context.index_regs[i].rxcsr);
+
+		if (musb->dyn_fifo) {
+			musb_write_txfifosz(musb_base,
+				musb_context.index_regs[i].txfifosz);
+			musb_write_rxfifosz(musb_base,
+				musb_context.index_regs[i].rxfifosz);
+			musb_write_txfifoadd(musb_base,
+				musb_context.index_regs[i].txfifoadd);
+			musb_write_rxfifoadd(musb_base,
+				musb_context.index_regs[i].rxfifoadd);
+		}
+
+		if (is_host_enabled(musb)) {
+			musb_writeb(musb_base, 0x10 + MUSB_TXTYPE,
+				musb_context.index_regs[i].txtype);
+			musb_writeb(musb_base, 0x10 + MUSB_TXINTERVAL,
+				musb_context.index_regs[i].txinterval);
+			musb_writeb(musb_base, 0x10 + MUSB_RXTYPE,
+				musb_context.index_regs[i].rxtype);
+			musb_writeb(musb_base, 0x10 + MUSB_RXINTERVAL,
+
+			musb_context.index_regs[i].rxinterval);
+			musb_write_txfunaddr(musb_base, i,
+				musb_context.index_regs[i].txfunaddr);
+			musb_write_txhubaddr(musb_base, i,
+				musb_context.index_regs[i].txhubaddr);
+			musb_write_txhubport(musb_base, i,
+				musb_context.index_regs[i].txhubport);
+
+			ep_target_regs =
+				musb_read_target_reg_base(i, musb_base);
+
+			musb_write_rxfunaddr(ep_target_regs,
+				musb_context.index_regs[i].rxfunaddr);
+			musb_write_rxhubaddr(ep_target_regs,
+				musb_context.index_regs[i].rxhubaddr);
+			musb_write_rxhubport(ep_target_regs,
+				musb_context.index_regs[i].rxhubport);
+		}
+	}
+
+	musb_writeb(musb_base, MUSB_INDEX, musb_context.index);
+}
+
 static int musb_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -2194,6 +2324,8 @@ static int musb_suspend(struct device *dev)
 		 */
 	}
 
+	musb_save_context(musb);
+
 	if (musb->set_clock)
 		musb->set_clock(musb->clock, 0);
 	else
@@ -2215,6 +2347,8 @@ static int musb_resume_noirq(struct device *dev)
 	else
 		clk_enable(musb->clock);
 
+	musb_restore_context(musb);
+
 	/* for static cmos like DaVinci, register values were preserved
 	 * unless for some reason the whole soc powered down or the USB
 	 * module got reset through the PSC (vs just being disabled).
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 5514c7ee85bd..d849fb81c131 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -52,6 +52,15 @@ struct musb;
 struct musb_hw_ep;
 struct musb_ep;
 
+/* Helper defines for struct musb->hwvers */
+#define MUSB_HWVERS_MAJOR(x)	((x >> 10) & 0x1f)
+#define MUSB_HWVERS_MINOR(x)	(x & 0x3ff)
+#define MUSB_HWVERS_RC		0x8000
+#define MUSB_HWVERS_1300	0x52C
+#define MUSB_HWVERS_1400	0x590
+#define MUSB_HWVERS_1800	0x720
+#define MUSB_HWVERS_1900	0x784
+#define MUSB_HWVERS_2000	0x800
 
 #include "musb_debug.h"
 #include "musb_dma.h"
@@ -322,13 +331,6 @@ struct musb {
 	struct clk		*clock;
 	irqreturn_t		(*isr)(int, void *);
 	struct work_struct	irq_work;
-#define MUSB_HWVERS_MAJOR(x)	((x >> 10) & 0x1f)
-#define MUSB_HWVERS_MINOR(x)	(x & 0x3ff)
-#define MUSB_HWVERS_RC		0x8000
-#define MUSB_HWVERS_1300	0x52C
-#define MUSB_HWVERS_1400	0x590
-#define MUSB_HWVERS_1800	0x720
-#define MUSB_HWVERS_2000	0x800
 	u16			hwvers;
 
 /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
@@ -411,22 +413,15 @@ struct musb {
 
 	unsigned		hb_iso_rx:1;	/* high bandwidth iso rx? */
 	unsigned		hb_iso_tx:1;	/* high bandwidth iso tx? */
+	unsigned		dyn_fifo:1;	/* dynamic FIFO supported? */
 
-#ifdef C_MP_TX
-	unsigned bulk_split:1;
+	unsigned		bulk_split:1;
 #define	can_bulk_split(musb,type) \
-		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
-#else
-#define	can_bulk_split(musb, type)	0
-#endif
+	(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
 
-#ifdef C_MP_RX
-	unsigned bulk_combine:1;
+	unsigned		bulk_combine:1;
 #define	can_bulk_combine(musb,type) \
-		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
-#else
-#define	can_bulk_combine(musb, type)	0
-#endif
+	(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
 
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	/* is_suspended means USB B_PERIPHERAL suspend */
@@ -461,6 +456,45 @@ struct musb {
 #endif
 };
 
+#ifdef CONFIG_PM
+struct musb_csr_regs {
+	/* FIFO registers */
+	u16 txmaxp, txcsr, rxmaxp, rxcsr;
+	u16 rxfifoadd, txfifoadd;
+	u8 txtype, txinterval, rxtype, rxinterval;
+	u8 rxfifosz, txfifosz;
+	u8 txfunaddr, txhubaddr, txhubport;
+	u8 rxfunaddr, rxhubaddr, rxhubport;
+};
+
+struct musb_context_registers {
+
+#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430)
+	u32 otg_sysconfig, otg_forcestandby;
+#endif
+	u8 power;
+	u16 intrtxe, intrrxe;
+	u8 intrusbe;
+	u16 frame;
+	u8 index, testmode;
+
+	u8 devctl, misc;
+
+	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
+};
+
+#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430)
+extern void musb_platform_save_context(struct musb *musb,
+		struct musb_context_registers *musb_context);
+extern void musb_platform_restore_context(struct musb *musb,
+		struct musb_context_registers *musb_context);
+#else
+#define musb_platform_save_context(m, x)	do {} while (0)
+#define musb_platform_restore_context(m, x)	do {} while (0)
+#endif
+
+#endif
+
 static inline void musb_set_vbus(struct musb *musb, int is_on)
 {
 	musb->board_set_vbus(musb, is_on);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index cbcf14a236e6..a9f288cd70ed 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -895,7 +895,14 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		/* REVISIT if can_bulk_split(), use by updating "tmp";
 		 * likewise high bandwidth periodic tx
 		 */
-		musb_writew(regs, MUSB_TXMAXP, tmp);
+		/* Set TXMAXP with the FIFO size of the endpoint
+		 * to disable double buffering mode. Currently, It seems that double
+		 * buffering has problem if musb RTL revision number < 2.0.
+		 */
+		if (musb->hwvers < MUSB_HWVERS_2000)
+			musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
+		else
+			musb_writew(regs, MUSB_TXMAXP, tmp);
 
 		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
 		if (musb_readw(regs, MUSB_TXCSR)
@@ -925,7 +932,13 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		/* REVISIT if can_bulk_combine() use by updating "tmp"
 		 * likewise high bandwidth periodic rx
 		 */
-		musb_writew(regs, MUSB_RXMAXP, tmp);
+		/* Set RXMAXP with the FIFO size of the endpoint
+		 * to disable double buffering mode.
+		 */
+		if (musb->hwvers < MUSB_HWVERS_2000)
+			musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_rx);
+		else
+			musb_writew(regs, MUSB_RXMAXP, tmp);
 
 		/* force shared fifo to OUT-only mode */
 		if (hw_ep->is_shared_fifo) {
@@ -1697,8 +1710,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 		return -EINVAL;
 
 	/* driver must be initialized to support peripheral mode */
-	if (!musb || !(musb->board_mode == MUSB_OTG
-				|| musb->board_mode != MUSB_OTG)) {
+	if (!musb) {
 		DBG(1, "%s, no dev??\n", __func__);
 		return -ENODEV;
 	}
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 74c4c3698f1e..3421cf9858b5 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -605,8 +605,14 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
 	musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
 	musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
 	/* NOTE: bulk combining rewrites high bits of maxpacket */
-	musb_writew(ep->regs, MUSB_RXMAXP,
-			qh->maxpacket | ((qh->hb_mult - 1) << 11));
+	/* Set RXMAXP with the FIFO size of the endpoint
+	 * to disable double buffer mode.
+	 */
+	if (musb->hwvers < MUSB_HWVERS_2000)
+		musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
+	else
+		musb_writew(ep->regs, MUSB_RXMAXP,
+				qh->maxpacket | ((qh->hb_mult - 1) << 11));
 
 	ep->rx_reinit = 0;
 }
@@ -1771,6 +1777,9 @@ static int musb_schedule(
 	int			best_end, epnum;
 	struct musb_hw_ep	*hw_ep = NULL;
 	struct list_head	*head = NULL;
+	u8			toggle;
+	u8			txtype;
+	struct urb		*urb = next_urb(qh);
 
 	/* use fixed hardware for control and bulk */
 	if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
@@ -1809,6 +1818,27 @@ static int musb_schedule(
 		diff -= (qh->maxpacket * qh->hb_mult);
 
 		if (diff >= 0 && best_diff > diff) {
+
+			/*
+			 * Mentor controller has a bug in that if we schedule
+			 * a BULK Tx transfer on an endpoint that had earlier
+			 * handled ISOC then the BULK transfer has to start on
+			 * a zero toggle.  If the BULK transfer starts on a 1
+			 * toggle then this transfer will fail as the mentor
+			 * controller starts the Bulk transfer on a 0 toggle
+			 * irrespective of the programming of the toggle bits
+			 * in the TXCSR register.  Check for this condition
+			 * while allocating the EP for a Tx Bulk transfer.  If
+			 * so skip this EP.
+			 */
+			hw_ep = musb->endpoints + epnum;
+			toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in);
+			txtype = (musb_readb(hw_ep->regs, MUSB_TXTYPE)
+					>> 4) & 0x3;
+			if (!is_in && (qh->type == USB_ENDPOINT_XFER_BULK) &&
+				toggle && (txtype == USB_ENDPOINT_XFER_ISOC))
+				continue;
+
 			best_diff = diff;
 			best_end = epnum;
 		}
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 473a94ef905f..292894a2c247 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -72,6 +72,10 @@
 #define MUSB_DEVCTL_HR		0x02
 #define MUSB_DEVCTL_SESSION	0x01
 
+/* MUSB ULPI VBUSCONTROL */
+#define MUSB_ULPI_USE_EXTVBUS	0x01
+#define MUSB_ULPI_USE_EXTVBUSIND 0x02
+
 /* TESTMODE */
 #define MUSB_TEST_FORCE_HOST	0x80
 #define MUSB_TEST_FIFO_ACCESS	0x40
@@ -246,6 +250,7 @@
 
 /* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
 #define MUSB_HWVERS		0x6C	/* 8 bit */
+#define MUSB_ULPI_BUSCONTROL	0x70	/* 8 bit */
 
 #define MUSB_EPINFO		0x78	/* 8 bit */
 #define MUSB_RAMINFO		0x79	/* 8 bit */
@@ -321,6 +326,26 @@ static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
 	musb_writew(mbase, MUSB_RXFIFOADD, c_off);
 }
 
+static inline u8 musb_read_txfifosz(void __iomem *mbase)
+{
+	return musb_readb(mbase, MUSB_TXFIFOSZ);
+}
+
+static inline u16 musb_read_txfifoadd(void __iomem *mbase)
+{
+	return musb_readw(mbase, MUSB_TXFIFOADD);
+}
+
+static inline u8 musb_read_rxfifosz(void __iomem *mbase)
+{
+	return musb_readb(mbase, MUSB_RXFIFOSZ);
+}
+
+static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
+{
+	return musb_readw(mbase, MUSB_RXFIFOADD);
+}
+
 static inline u8 musb_read_configdata(void __iomem *mbase)
 {
 	musb_writeb(mbase, MUSB_INDEX, 0);
@@ -376,6 +401,36 @@ static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
 			qh_h_port_reg);
 }
 
+static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR));
+}
+
+static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR));
+}
+
+static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT));
+}
+
+static inline u8  musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR));
+}
+
+static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR));
+}
+
+static inline u8  musb_read_txhubport(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT));
+}
+
 #else /* CONFIG_BLACKFIN */
 
 #define USB_BASE		USB_FADDR
@@ -455,6 +510,22 @@ static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
 {
 }
 
+static inline u8 musb_read_txfifosz(void __iomem *mbase)
+{
+}
+
+static inline u16 musb_read_txfifoadd(void __iomem *mbase)
+{
+}
+
+static inline u8 musb_read_rxfifosz(void __iomem *mbase)
+{
+}
+
+static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
+{
+}
+
 static inline u8 musb_read_configdata(void __iomem *mbase)
 {
 	return 0;
@@ -462,7 +533,11 @@ static inline u8 musb_read_configdata(void __iomem *mbase)
 
 static inline u16 musb_read_hwvers(void __iomem *mbase)
 {
-	return 0;
+	/*
+	 * This register is invisible on Blackfin, actually the MUSB
+	 * RTL version of Blackfin is 1.9, so just harcode its value.
+	 */
+	return MUSB_HWVERS_1900;
 }
 
 static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
@@ -500,6 +575,30 @@ static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
 {
 }
 
+static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
+{
+}
+
+static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
+{
+}
+
+static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
+{
+}
+
+static inline u8  musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
+{
+}
+
+static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
+{
+}
+
+static inline void  musb_read_txhubport(void __iomem *mbase, u8 epnum)
+{
+}
+
 #endif /* CONFIG_BLACKFIN */
 
 #endif	/* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index a237550f91bf..2fa7d5c00f31 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -250,20 +250,39 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
 	u8 bchannel;
 	u8 int_hsdma;
 
-	u32 addr;
+	u32 addr, count;
 	u16 csr;
 
 	spin_lock_irqsave(&musb->lock, flags);
 
 	int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
-	if (!int_hsdma)
-		goto done;
 
 #ifdef CONFIG_BLACKFIN
 	/* Clear DMA interrupt flags */
 	musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
 #endif
 
+	if (!int_hsdma) {
+		DBG(2, "spurious DMA irq\n");
+
+		for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
+			musb_channel = (struct musb_dma_channel *)
+					&(controller->channel[bchannel]);
+			channel = &musb_channel->channel;
+			if (channel->status == MUSB_DMA_STATUS_BUSY) {
+				count = musb_read_hsdma_count(mbase, bchannel);
+
+				if (count == 0)
+					int_hsdma |= (1 << bchannel);
+			}
+		}
+
+		DBG(2, "int_hsdma = 0x%x\n", int_hsdma);
+
+		if (!int_hsdma)
+			goto done;
+	}
+
 	for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
 		if (int_hsdma & (1 << bchannel)) {
 			musb_channel = (struct musb_dma_channel *)
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index 1299d92dc83f..613f95a058f7 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -55,6 +55,10 @@
 		    MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \
 		    addr)
 
+#define musb_read_hsdma_count(mbase, bchannel)	\
+	musb_readl(mbase,	\
+		   MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT))
+
 #define musb_write_hsdma_count(mbase, bchannel, len) \
 	musb_writel(mbase, \
 		    MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \
@@ -96,6 +100,19 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase,
 		((u16)(((u32) dma_addr >> 16) & 0xFFFF)));
 }
 
+static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
+{
+	u32 count = musb_readw(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
+
+	count = count << 16;
+
+	count |= musb_readw(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
+
+	return count;
+}
+
 static inline void musb_write_hsdma_count(void __iomem *mbase,
 				u8 bchannel, u32 len)
 {
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 83beeac5e7bf..3fe16867b5a8 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -220,7 +220,7 @@ int __init musb_platform_init(struct musb *musb)
 
 	musb_platform_resume(musb);
 
-	l = omap_readl(OTG_SYSCONFIG);
+	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
 	l &= ~ENABLEWAKEUP;	/* disable wakeup */
 	l &= ~NOSTDBY;		/* remove possible nostdby */
 	l |= SMARTSTDBY;	/* enable smart standby */
@@ -233,17 +233,19 @@ int __init musb_platform_init(struct musb *musb)
 	 */
 	if (!cpu_is_omap3430())
 		l |= AUTOIDLE;		/* enable auto idle */
-	omap_writel(l, OTG_SYSCONFIG);
+	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
 
-	l = omap_readl(OTG_INTERFSEL);
+	l = musb_readl(musb->mregs, OTG_INTERFSEL);
 	l |= ULPI_12PIN;
-	omap_writel(l, OTG_INTERFSEL);
+	musb_writel(musb->mregs, OTG_INTERFSEL, l);
 
 	pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
 			"sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
-			omap_readl(OTG_REVISION), omap_readl(OTG_SYSCONFIG),
-			omap_readl(OTG_SYSSTATUS), omap_readl(OTG_INTERFSEL),
-			omap_readl(OTG_SIMENABLE));
+			musb_readl(musb->mregs, OTG_REVISION),
+			musb_readl(musb->mregs, OTG_SYSCONFIG),
+			musb_readl(musb->mregs, OTG_SYSSTATUS),
+			musb_readl(musb->mregs, OTG_INTERFSEL),
+			musb_readl(musb->mregs, OTG_SIMENABLE));
 
 	omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
 
@@ -255,6 +257,22 @@ int __init musb_platform_init(struct musb *musb)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+void musb_platform_save_context(struct musb *musb,
+		struct musb_context_registers *musb_context)
+{
+	musb_context->otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
+	musb_context->otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
+}
+
+void musb_platform_restore_context(struct musb *musb,
+		struct musb_context_registers *musb_context)
+{
+	musb_writel(musb->mregs, OTG_SYSCONFIG, musb_context->otg_sysconfig);
+	musb_writel(musb->mregs, OTG_FORCESTDBY, musb_context->otg_forcestandby);
+}
+#endif
+
 int musb_platform_suspend(struct musb *musb)
 {
 	u32 l;
@@ -263,13 +281,13 @@ int musb_platform_suspend(struct musb *musb)
 		return 0;
 
 	/* in any role */
-	l = omap_readl(OTG_FORCESTDBY);
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
 	l |= ENABLEFORCE;	/* enable MSTANDBY */
-	omap_writel(l, OTG_FORCESTDBY);
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 
-	l = omap_readl(OTG_SYSCONFIG);
+	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
 	l |= ENABLEWAKEUP;	/* enable wakeup */
-	omap_writel(l, OTG_SYSCONFIG);
+	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
 
 	otg_set_suspend(musb->xceiv, 1);
 
@@ -295,13 +313,13 @@ static int musb_platform_resume(struct musb *musb)
 	else
 		clk_enable(musb->clock);
 
-	l = omap_readl(OTG_SYSCONFIG);
+	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
 	l &= ~ENABLEWAKEUP;	/* disable wakeup */
-	omap_writel(l, OTG_SYSCONFIG);
+	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
 
-	l = omap_readl(OTG_FORCESTDBY);
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
 	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
-	omap_writel(l, OTG_FORCESTDBY);
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 
 	return 0;
 }
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
index fbede7798aed..40b3c02ae9f0 100644
--- a/drivers/usb/musb/omap2430.h
+++ b/drivers/usb/musb/omap2430.h
@@ -10,47 +10,43 @@
 #ifndef __MUSB_OMAP243X_H__
 #define __MUSB_OMAP243X_H__
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
-#include <mach/hardware.h>
 #include <plat/usb.h>
 
 /*
  * OMAP2430-specific definitions
  */
 
-#define MENTOR_BASE_OFFSET	0
-#if	defined(CONFIG_ARCH_OMAP2430)
-#define	OMAP_HSOTG_BASE		(OMAP243X_HS_BASE)
-#elif	defined(CONFIG_ARCH_OMAP3430)
-#define	OMAP_HSOTG_BASE		(OMAP34XX_HSUSB_OTG_BASE)
-#endif
-#define OMAP_HSOTG(offset)	(OMAP_HSOTG_BASE + 0x400 + (offset))
-#define OTG_REVISION		OMAP_HSOTG(0x0)
-#define OTG_SYSCONFIG		OMAP_HSOTG(0x4)
+#define OTG_REVISION		0x400
+
+#define OTG_SYSCONFIG		0x404
 #	define	MIDLEMODE	12	/* bit position */
 #	define	FORCESTDBY		(0 << MIDLEMODE)
 #	define	NOSTDBY			(1 << MIDLEMODE)
 #	define	SMARTSTDBY		(2 << MIDLEMODE)
+
 #	define	SIDLEMODE		3	/* bit position */
 #	define	FORCEIDLE		(0 << SIDLEMODE)
 #	define	NOIDLE			(1 << SIDLEMODE)
 #	define	SMARTIDLE		(2 << SIDLEMODE)
+
 #	define	ENABLEWAKEUP		(1 << 2)
 #	define	SOFTRST			(1 << 1)
 #	define	AUTOIDLE		(1 << 0)
-#define OTG_SYSSTATUS		OMAP_HSOTG(0x8)
+
+#define OTG_SYSSTATUS		0x408
 #	define	RESETDONE		(1 << 0)
-#define OTG_INTERFSEL		OMAP_HSOTG(0xc)
+
+#define OTG_INTERFSEL		0x40c
 #	define	EXTCP			(1 << 2)
-#	define	PHYSEL		0	/* bit position */
+#	define	PHYSEL			0	/* bit position */
 #	define	UTMI_8BIT		(0 << PHYSEL)
 #	define	ULPI_12PIN		(1 << PHYSEL)
 #	define	ULPI_8PIN		(2 << PHYSEL)
-#define OTG_SIMENABLE		OMAP_HSOTG(0x10)
+
+#define OTG_SIMENABLE		0x410
 #	define	TM1			(1 << 0)
-#define OTG_FORCESTDBY		OMAP_HSOTG(0x14)
-#	define	ENABLEFORCE		(1 << 0)
 
-#endif	/* CONFIG_ARCH_OMAP2430 */
+#define OTG_FORCESTDBY		0x414
+#	define	ENABLEFORCE		(1 << 0)
 
 #endif	/* __MUSB_OMAP243X_H__ */
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 88b587c703e9..ab776a8d98ca 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1118,7 +1118,7 @@ int __init musb_platform_init(struct musb *musb)
 	}
 	musb->sync = mem->start;
 
-	sync = ioremap(mem->start, mem->end - mem->start + 1);
+	sync = ioremap(mem->start, resource_size(mem));
 	if (!sync) {
 		pr_debug("ioremap for sync failed\n");
 		ret = -ENOMEM;
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index e13c77052e5e..1c868096bd6f 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -648,7 +648,7 @@ void dma_controller_destroy(struct dma_controller *c)
 		}
 	}
 
-	if (!tusb_dma->multichannel && tusb_dma && tusb_dma->ch >= 0)
+	if (tusb_dma && !tusb_dma->multichannel && tusb_dma->ch >= 0)
 		omap_free_dma(tusb_dma->ch);
 
 	kfree(tusb_dma);
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 2be9f2fa41f9..3e4e9f434d78 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -36,7 +36,7 @@
 #include <linux/i2c/twl.h>
 #include <linux/regulator/consumer.h>
 #include <linux/err.h>
-
+#include <linux/notifier.h>
 
 /* Register defines */
 
@@ -236,15 +236,6 @@
 #define PMBR1				0x0D
 #define GPIO_USB_4PIN_ULPI_2430C	(3 << 0)
 
-
-
-enum linkstat {
-	USB_LINK_UNKNOWN = 0,
-	USB_LINK_NONE,
-	USB_LINK_VBUS,
-	USB_LINK_ID,
-};
-
 struct twl4030_usb {
 	struct otg_transceiver	otg;
 	struct device		*dev;
@@ -347,10 +338,10 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
 
 /*-------------------------------------------------------------------------*/
 
-static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl)
+static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl)
 {
 	int	status;
-	int	linkstat = USB_LINK_UNKNOWN;
+	int	linkstat = USB_EVENT_NONE;
 
 	/*
 	 * For ID/VBUS sensing, see manual section 15.4.8 ...
@@ -368,11 +359,11 @@ static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl)
 		dev_err(twl->dev, "USB link status err %d\n", status);
 	else if (status & (BIT(7) | BIT(2))) {
 		if (status & BIT(2))
-			linkstat = USB_LINK_ID;
+			linkstat = USB_EVENT_ID;
 		else
-			linkstat = USB_LINK_VBUS;
+			linkstat = USB_EVENT_VBUS;
 	} else
-		linkstat = USB_LINK_NONE;
+		linkstat = USB_EVENT_NONE;
 
 	dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
 			status, status, linkstat);
@@ -383,7 +374,7 @@ static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl)
 
 	spin_lock_irq(&twl->lock);
 	twl->linkstat = linkstat;
-	if (linkstat == USB_LINK_ID) {
+	if (linkstat == USB_EVENT_ID) {
 		twl->otg.default_a = true;
 		twl->otg.state = OTG_STATE_A_IDLE;
 	} else {
@@ -564,7 +555,7 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev,
 
 	spin_lock_irqsave(&twl->lock, flags);
 	ret = sprintf(buf, "%s\n",
-			(twl->linkstat == USB_LINK_VBUS) ? "on" : "off");
+			(twl->linkstat == USB_EVENT_VBUS) ? "on" : "off");
 	spin_unlock_irqrestore(&twl->lock, flags);
 
 	return ret;
@@ -576,17 +567,8 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 	struct twl4030_usb *twl = _twl;
 	int status;
 
-#ifdef CONFIG_LOCKDEP
-	/* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
-	 * we don't want and can't tolerate.  Although it might be
-	 * friendlier not to borrow this thread context...
-	 */
-	local_irq_enable();
-#endif
-
 	status = twl4030_usb_linkstat(twl);
-	if (status != USB_LINK_UNKNOWN) {
-
+	if (status >= 0) {
 		/* FIXME add a set_power() method so that B-devices can
 		 * configure the charger appropriately.  It's not always
 		 * correct to consume VBUS power, and how much current to
@@ -598,12 +580,13 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 		 * USB_LINK_VBUS state.  musb_hdrc won't care until it
 		 * starts to handle softconnect right.
 		 */
-		if (status == USB_LINK_NONE)
+		if (status == USB_EVENT_NONE)
 			twl4030_phy_suspend(twl, 0);
 		else
 			twl4030_phy_resume(twl);
 
-		twl4030charger_usb_en(status == USB_LINK_VBUS);
+		blocking_notifier_call_chain(&twl->otg.notifier, status,
+				twl->otg.gadget);
 	}
 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
 
@@ -693,6 +676,8 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
 	if (device_create_file(&pdev->dev, &dev_attr_vbus))
 		dev_warn(&pdev->dev, "could not create sysfs file\n");
 
+	BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
+
 	/* Our job is to use irqs and status from the power module
 	 * to keep the transceiver disabled when nothing's connected.
 	 *
@@ -702,7 +687,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
 	 * need both handles, otherwise just one suffices.
 	 */
 	twl->irq_enabled = true;
-	status = request_irq(twl->irq, twl4030_usb_irq,
+	status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq,
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			"twl4030_usb", twl);
 	if (status < 0) {
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index c480ea4c19f2..c78b255e3f83 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -472,6 +472,17 @@ config USB_SERIAL_OTI6858
 	  To compile this driver as a module, choose M here: the
 	  module will be called oti6858.
 
+config USB_SERIAL_QCAUX
+	tristate "USB Qualcomm Auxiliary Serial Port Driver"
+	---help---
+	  Say Y here if you want to use the auxiliary serial ports provided
+	  by many modems based on Qualcomm chipsets.  These ports often use
+	  a proprietary protocol called DM and cannot be used for AT- or
+	  PPP-based communication.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called moto_modem.  If unsure, choose N.
+
 config USB_SERIAL_QUALCOMM
 	tristate "USB Qualcomm Serial modem"
 	help
@@ -600,6 +611,14 @@ config USB_SERIAL_OPTICON
 	  To compile this driver as a module, choose M here: the
 	  module will be called opticon.
 
+config USB_SERIAL_VIVOPAY_SERIAL
+        tristate "USB ViVOpay serial interface driver"
+        help
+          Say Y here if you want to use a ViVOtech ViVOpay USB device.
+
+          To compile this driver as a module, choose M here: the
+          module will be called vivopay-serial.
+
 config USB_SERIAL_DEBUG
 	tristate "USB Debugging Device"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 66619beb6cc0..83c9e431a568 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_USB_SERIAL_OPTICON)		+= opticon.o
 obj-$(CONFIG_USB_SERIAL_OPTION)			+= option.o
 obj-$(CONFIG_USB_SERIAL_OTI6858)		+= oti6858.o
 obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
+obj-$(CONFIG_USB_SERIAL_QCAUX)			+= qcaux.o
 obj-$(CONFIG_USB_SERIAL_QUALCOMM)		+= qcserial.o
 obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
 obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)		+= siemens_mpi.o
@@ -55,4 +56,5 @@ obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
 obj-$(CONFIG_USB_SERIAL_XIRCOM)			+= keyspan_pda.o
+obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL)	+= vivopay-serial.o
 
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index b10ac8409411..365db1097bfd 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -78,7 +78,7 @@ static int debug;
 #define DRIVER_DESC "AIRcable USB Driver"
 
 /* ID table that will be registered with USB core */
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) },
 	{ },
 };
@@ -468,10 +468,6 @@ static void aircable_read_bulk_callback(struct urb *urb)
 
 	if (status) {
 		dbg("%s - urb status = %d", __func__, status);
-		if (!port->port.count) {
-			dbg("%s - port is closed, exiting.", __func__);
-			return;
-		}
 		if (status == -EPROTO) {
 			dbg("%s - caught -EPROTO, resubmitting the urb",
 			    __func__);
@@ -530,23 +526,19 @@ static void aircable_read_bulk_callback(struct urb *urb)
 	}
 	tty_kref_put(tty);
 
-	/* Schedule the next read _if_ we are still open */
-	if (port->port.count) {
-		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-				  usb_rcvbulkpipe(port->serial->dev,
-					  port->bulk_in_endpointAddress),
-				  port->read_urb->transfer_buffer,
-				  port->read_urb->transfer_buffer_length,
-				  aircable_read_bulk_callback, port);
-
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&urb->dev->dev,
-				"%s - failed resubmitting read urb, error %d\n",
-				__func__, result);
-	}
-
-	return;
+	/* Schedule the next read */
+	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+			  usb_rcvbulkpipe(port->serial->dev,
+				  port->bulk_in_endpointAddress),
+			  port->read_urb->transfer_buffer,
+			  port->read_urb->transfer_buffer_length,
+			  aircable_read_bulk_callback, port);
+
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result && result != -EPERM)
+		dev_err(&urb->dev->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+			__func__, result);
 }
 
 /* Based on ftdi_sio.c throttle */
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index a9c2dec8e3fb..547c9448c28c 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -50,7 +50,7 @@ static int debug;
 /* usb timeout of 1 second */
 #define ARK_TIMEOUT (1*HZ)
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x6547, 0x0232) },
 	{ USB_DEVICE(0x18ec, 0x3118) },		/* USB to IrDA adapter */
 	{ },
@@ -733,7 +733,6 @@ static void ark3116_read_bulk_callback(struct urb *urb)
 
 		tty = tty_port_tty_get(&port->port);
 		if (tty) {
-			tty_buffer_request_room(tty, urb->actual_length + 1);
 			/* overrun is special, not associated with a char */
 			if (unlikely(lsr & UART_LSR_OE))
 				tty_insert_flip_char(tty, 0, TTY_OVERRUN);
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index a0467bc61627..1295e44e3f1c 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -103,7 +103,7 @@ static int  belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
 					unsigned int set, unsigned int clear);
 
 
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
 	{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
 	{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 59eff721fcc5..9f4fed1968b5 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -22,6 +22,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
+#include <asm/unaligned.h>
 
 #define DEFAULT_BAUD_RATE 9600
 #define DEFAULT_TIMEOUT   1000
@@ -70,7 +71,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x4348, 0x5523) },
 	{ USB_DEVICE(0x1a86, 0x7523) },
 	{ },
@@ -392,16 +393,22 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 	struct usb_serial_port *port = tty->driver_data;
 	int r;
 	uint16_t reg_contents;
-	uint8_t break_reg[2];
+	uint8_t *break_reg;
 
 	dbg("%s()", __func__);
 
+	break_reg = kmalloc(2, GFP_KERNEL);
+	if (!break_reg) {
+		dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
+		return;
+	}
+
 	r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
-			ch341_break_reg, 0, break_reg, sizeof(break_reg));
+			ch341_break_reg, 0, break_reg, 2);
 	if (r < 0) {
-		printk(KERN_WARNING "%s: USB control read error whilst getting"
-				" break register contents.\n", __FILE__);
-		return;
+		dev_err(&port->dev, "%s - USB control read error (%d)\n",
+				__func__, r);
+		goto out;
 	}
 	dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x",
 			__func__, break_reg[0], break_reg[1]);
@@ -416,12 +423,14 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 	}
 	dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x",
 			__func__, break_reg[0], break_reg[1]);
-	reg_contents = (uint16_t)break_reg[0] | ((uint16_t)break_reg[1] << 8);
+	reg_contents = get_unaligned_le16(break_reg);
 	r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
 			ch341_break_reg, reg_contents);
 	if (r < 0)
-		printk(KERN_WARNING "%s: USB control write error whilst setting"
-				" break register contents.\n", __FILE__);
+		dev_err(&port->dev, "%s - USB control write error (%d)\n",
+				__func__, r);
+out:
+	kfree(break_reg);
 }
 
 static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index bd254ec97d14..507382b0a9ed 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -55,7 +55,7 @@ static int cp210x_carrier_raised(struct usb_serial_port *p);
 
 static int debug;
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
 	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
@@ -91,11 +91,12 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+	{ USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
 	{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
-	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
@@ -612,7 +613,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 				baud);
 		if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
 					((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
-			dbg("Baud rate requested not supported by device\n");
+			dbg("Baud rate requested not supported by device");
 			baud = tty_termios_baud_rate(old_termios);
 		}
 	}
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index b0f6402a91ca..f744ab7a3b19 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -70,7 +70,7 @@ static void cyberjack_read_int_callback(struct urb *urb);
 static void cyberjack_read_bulk_callback(struct urb *urb);
 static void cyberjack_write_bulk_callback(struct urb *urb);
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) },
 	{ }			/* Terminating entry */
 };
@@ -391,11 +391,10 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (!tty) {
-		dbg("%s - ignoring since device not open\n", __func__);
+		dbg("%s - ignoring since device not open", __func__);
 		return;
 	}
 	if (urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index a591ebec0f89..baf74b44e6ed 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -66,17 +66,15 @@
 #include <linux/serial.h>
 #include <linux/delay.h>
 #include <linux/uaccess.h>
+#include <asm/unaligned.h>
 
 #include "cypress_m8.h"
 
 
-#ifdef CONFIG_USB_SERIAL_DEBUG
-	static int debug = 1;
-#else
-	static int debug;
-#endif
+static int debug;
 static int stats;
 static int interval;
+static int unstable_bauds;
 
 /*
  * Version Information
@@ -89,24 +87,24 @@ static int interval;
 #define CYPRESS_BUF_SIZE	1024
 #define CYPRESS_CLOSING_WAIT	(30*HZ)
 
-static struct usb_device_id id_table_earthmate [] = {
+static const struct usb_device_id id_table_earthmate[] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_cyphidcomrs232 [] = {
+static const struct usb_device_id id_table_cyphidcomrs232[] = {
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_nokiaca42v2 [] = {
+static const struct usb_device_id id_table_nokiaca42v2[] = {
 	{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
@@ -295,6 +293,9 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 	struct cypress_private *priv;
 	priv = usb_get_serial_port_data(port);
 
+	if (unstable_bauds)
+		return new_rate;
+
 	/*
 	 * The general purpose firmware for the Cypress M8 allows for
 	 * a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -344,7 +345,8 @@ static int cypress_serial_control(struct tty_struct *tty,
 {
 	int new_baudrate = 0, retval = 0, tries = 0;
 	struct cypress_private *priv;
-	__u8 feature_buffer[5];
+	u8 *feature_buffer;
+	const unsigned int feature_len = 5;
 	unsigned long flags;
 
 	dbg("%s", __func__);
@@ -354,17 +356,18 @@ static int cypress_serial_control(struct tty_struct *tty,
 	if (!priv->comm_is_ok)
 		return -ENODEV;
 
+	feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
+	if (!feature_buffer)
+		return -ENOMEM;
+
 	switch (cypress_request_type) {
 	case CYPRESS_SET_CONFIG:
-		new_baudrate = priv->baud_rate;
 		/* 0 means 'Hang up' so doesn't change the true bit rate */
-		if (baud_rate == 0)
-			new_baudrate = priv->baud_rate;
-		/* Change of speed ? */
-		else if (baud_rate != priv->baud_rate) {
+		new_baudrate = priv->baud_rate;
+		if (baud_rate && baud_rate != priv->baud_rate) {
 			dbg("%s - baud rate is changing", __func__);
 			retval = analyze_baud_rate(port, baud_rate);
-			if (retval >=  0) {
+			if (retval >= 0) {
 				new_baudrate = retval;
 				dbg("%s - New baud rate set to %d",
 				    __func__, new_baudrate);
@@ -373,9 +376,8 @@ static int cypress_serial_control(struct tty_struct *tty,
 		dbg("%s - baud rate is being sent as %d",
 					__func__, new_baudrate);
 
-		memset(feature_buffer, 0, sizeof(feature_buffer));
 		/* fill the feature_buffer with new configuration */
-		*((u_int32_t *)feature_buffer) = new_baudrate;
+		put_unaligned_le32(new_baudrate, feature_buffer);
 		feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
 		/* 1 bit gap */
 		feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
@@ -397,15 +399,15 @@ static int cypress_serial_control(struct tty_struct *tty,
 					HID_REQ_SET_REPORT,
 					USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 					0x0300, 0, feature_buffer,
-					sizeof(feature_buffer), 500);
+					feature_len, 500);
 
 			if (tries++ >= 3)
 				break;
 
-		} while (retval != sizeof(feature_buffer) &&
+		} while (retval != feature_len &&
 			 retval != -ENODEV);
 
-		if (retval != sizeof(feature_buffer)) {
+		if (retval != feature_len) {
 			dev_err(&port->dev, "%s - failed sending serial "
 				"line settings - %d\n", __func__, retval);
 			cypress_set_dead(port);
@@ -425,43 +427,42 @@ static int cypress_serial_control(struct tty_struct *tty,
 			/* Not implemented for this device,
 			   and if we try to do it we're likely
 			   to crash the hardware. */
-			return -ENOTTY;
+			retval = -ENOTTY;
+			goto out;
 		}
 		dbg("%s - retreiving serial line settings", __func__);
-		/* set initial values in feature buffer */
-		memset(feature_buffer, 0, sizeof(feature_buffer));
-
 		do {
 			retval = usb_control_msg(port->serial->dev,
 					usb_rcvctrlpipe(port->serial->dev, 0),
 					HID_REQ_GET_REPORT,
 					USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 					0x0300, 0, feature_buffer,
-					sizeof(feature_buffer), 500);
+					feature_len, 500);
 
 			if (tries++ >= 3)
 				break;
-		} while (retval != sizeof(feature_buffer)
+		} while (retval != feature_len
 						&& retval != -ENODEV);
 
-		if (retval != sizeof(feature_buffer)) {
+		if (retval != feature_len) {
 			dev_err(&port->dev, "%s - failed to retrieve serial "
 				"line settings - %d\n", __func__, retval);
 			cypress_set_dead(port);
-			return retval;
+			goto out;
 		} else {
 			spin_lock_irqsave(&priv->lock, flags);
 			/* store the config in one byte, and later
 			   use bit masks to check values */
 			priv->current_config = feature_buffer[4];
-			priv->baud_rate = *((u_int32_t *)feature_buffer);
+			priv->baud_rate = get_unaligned_le32(feature_buffer);
 			spin_unlock_irqrestore(&priv->lock, flags);
 		}
 	}
 	spin_lock_irqsave(&priv->lock, flags);
 	++priv->cmd_count;
 	spin_unlock_irqrestore(&priv->lock, flags);
-
+out:
+	kfree(feature_buffer);
 	return retval;
 } /* cypress_serial_control */
 
@@ -690,7 +691,6 @@ static void cypress_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	/* drop dtr and rts */
-	priv = usb_get_serial_port_data(port);
 	spin_lock_irq(&priv->lock);
 	if (on == 0)
 		priv->line_control = 0;
@@ -1307,13 +1307,9 @@ static void cypress_read_int_callback(struct urb *urb)
 		spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* process read if there is data other than line status */
-	if (tty && (bytes > i)) {
-		bytes = tty_buffer_request_room(tty, bytes);
-		for (; i < bytes ; ++i) {
-			dbg("pushing byte number %d - %d - %c", i, data[i],
-					data[i]);
-			tty_insert_flip_char(tty, data[i], tty_flag);
-		}
+	if (tty && bytes > i) {
+		tty_insert_flip_string_fixed_flag(tty, data + i,
+				bytes - i, tty_flag);
 		tty_flip_buffer_push(tty);
 	}
 
@@ -1325,9 +1321,9 @@ static void cypress_read_int_callback(struct urb *urb)
 continue_read:
 	tty_kref_put(tty);
 
-	/* Continue trying to always read... unless the port has closed. */
+	/* Continue trying to always read */
 
-	if (port->port.count > 0 && priv->comm_is_ok) {
+	if (priv->comm_is_ok) {
 		usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
 				usb_rcvintpipe(port->serial->dev,
 					port->interrupt_in_endpointAddress),
@@ -1336,7 +1332,7 @@ continue_read:
 				cypress_read_int_callback, port,
 				priv->read_urb_interval);
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
-		if (result) {
+		if (result && result != -EPERM) {
 			dev_err(&urb->dev->dev, "%s - failed resubmitting "
 					"read urb, error %d\n", __func__,
 					result);
@@ -1650,3 +1646,5 @@ module_param(stats, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(stats, "Enable statistics or not");
 module_param(interval, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(interval, "Overrides interrupt interval");
+module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 68e80be6b9e1..68b0aa5e516c 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -470,18 +470,18 @@ static int digi_read_oob_callback(struct urb *urb);
 
 static int debug;
 
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
 	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_2 [] = {
+static const struct usb_device_id id_table_2[] = {
 	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_4 [] = {
+static const struct usb_device_id id_table_4[] = {
 	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
 	{ }						/* Terminating entry */
 };
@@ -1262,10 +1262,10 @@ static void digi_write_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	/* try to send any buffered data on this port, if it is open */
+	/* try to send any buffered data on this port */
 	spin_lock(&priv->dp_port_lock);
 	priv->dp_write_urb_in_use = 0;
-	if (port->port.count && priv->dp_out_buf_len > 0) {
+	if (priv->dp_out_buf_len > 0) {
 		*((unsigned char *)(port->write_urb->transfer_buffer))
 			= (unsigned char)DIGI_CMD_SEND_DATA;
 		*((unsigned char *)(port->write_urb->transfer_buffer) + 1)
@@ -1288,7 +1288,7 @@ static void digi_write_bulk_callback(struct urb *urb)
 	schedule_work(&priv->dp_wakeup_work);
 
 	spin_unlock(&priv->dp_port_lock);
-	if (ret)
+	if (ret && ret != -EPERM)
 		dev_err(&port->dev,
 			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
@@ -1353,8 +1353,7 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	struct ktermios not_termios;
 
-	dbg("digi_open: TOP: port=%d, open_count=%d",
-		priv->dp_port_num, port->port.count);
+	dbg("digi_open: TOP: port=%d", priv->dp_port_num);
 
 	/* be sure the device is started up */
 	if (digi_startup_device(port->serial) != 0)
@@ -1393,8 +1392,7 @@ static void digi_close(struct usb_serial_port *port)
 	unsigned char buf[32];
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
-	dbg("digi_close: TOP: port=%d, open_count=%d",
-		priv->dp_port_num, port->port.count);
+	dbg("digi_close: TOP: port=%d", priv->dp_port_num);
 
 	mutex_lock(&port->serial->disc_mutex);
 	/* if disconnected, just clear flags */
@@ -1629,7 +1627,7 @@ static void digi_read_bulk_callback(struct urb *urb)
 	/* continue read */
 	urb->dev = port->serial->dev;
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
-	if (ret != 0) {
+	if (ret != 0 && ret != -EPERM) {
 		dev_err(&port->dev,
 			"%s: failed resubmitting urb, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
@@ -1658,12 +1656,11 @@ static int digi_read_inb_callback(struct urb *urb)
 	int port_status = ((unsigned char *)urb->transfer_buffer)[2];
 	unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3;
 	int flag, throttled;
-	int i;
 	int status = urb->status;
 
 	/* do not process callbacks on closed ports */
 	/* but do continue the read chain */
-	if (port->port.count == 0)
+	if (urb->status == -ENOENT)
 		return 0;
 
 	/* short/multiple packet check */
@@ -1705,17 +1702,9 @@ static int digi_read_inb_callback(struct urb *urb)
 
 		/* data length is len-1 (one byte of len is port_status) */
 		--len;
-
-		len = tty_buffer_request_room(tty, len);
 		if (len > 0) {
-			/* Hot path */
-			if (flag == TTY_NORMAL)
-				tty_insert_flip_string(tty, data, len);
-			else {
-				for (i = 0; i < len; i++)
-					tty_insert_flip_char(tty,
-								data[i], flag);
-			}
+			tty_insert_flip_string_fixed_flag(tty, data, len,
+									flag);
 			tty_flip_buffer_push(tty);
 		}
 	}
@@ -1776,8 +1765,7 @@ static int digi_read_oob_callback(struct urb *urb)
 
 		tty = tty_port_tty_get(&port->port);
 		rts = 0;
-		if (port->port.count)
-			rts = tty->termios->c_cflag & CRTSCTS;
+		rts = tty->termios->c_cflag & CRTSCTS;
 		
 		if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
 			spin_lock(&priv->dp_port_lock);
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 7dd0e3eadbe6..5f740a1eacab 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -93,7 +93,7 @@ static void empeg_init_termios(struct tty_struct *tty);
 static void empeg_write_bulk_callback(struct urb *urb);
 static void empeg_read_bulk_callback(struct urb *urb);
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
@@ -346,7 +346,6 @@ static void empeg_read_bulk_callback(struct urb *urb)
 	tty = tty_port_tty_get(&port->port);
 
 	if (urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 		bytes_in += urb->actual_length;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 7638828e7317..6af0dfa5f5ac 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -33,12 +33,12 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/serial.h>
@@ -88,10 +88,10 @@ struct ftdi_private {
 
 	unsigned int latency;		/* latency setting in use */
 	spinlock_t tx_lock;	/* spinlock for transmit state */
-	unsigned long tx_bytes;
 	unsigned long tx_outstanding_bytes;
 	unsigned long tx_outstanding_urbs;
 	unsigned short max_packet_size;
+	struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() */
 };
 
 /* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -614,6 +614,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
 	{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+	{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
@@ -737,6 +738,10 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -812,7 +817,7 @@ static struct usb_serial_driver ftdi_sio_device = {
 		.name =		"ftdi_sio",
 	},
 	.description =		"FTDI USB Serial Device",
-	.usb_driver = 		&ftdi_driver ,
+	.usb_driver = 		&ftdi_driver,
 	.id_table =		id_table_combined,
 	.num_ports =		1,
 	.probe =		ftdi_sio_probe,
@@ -828,8 +833,8 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.chars_in_buffer =	ftdi_chars_in_buffer,
 	.read_bulk_callback =	ftdi_read_bulk_callback,
 	.write_bulk_callback =	ftdi_write_bulk_callback,
-	.tiocmget =             ftdi_tiocmget,
-	.tiocmset =             ftdi_tiocmset,
+	.tiocmget =		ftdi_tiocmget,
+	.tiocmset =		ftdi_tiocmset,
 	.ioctl =		ftdi_ioctl,
 	.set_termios =		ftdi_set_termios,
 	.break_ctl =		ftdi_break_ctl,
@@ -935,7 +940,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 							unsigned int clear)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char *buf;
 	unsigned urb_value;
 	int rv;
 
@@ -944,10 +948,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 		return 0;	/* no change */
 	}
 
-	buf = kmalloc(1, GFP_NOIO);
-	if (!buf)
-		return -ENOMEM;
-
 	clear &= ~set;	/* 'set' takes precedence over 'clear' */
 	urb_value = 0;
 	if (clear & TIOCM_DTR)
@@ -963,9 +963,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 			       FTDI_SIO_SET_MODEM_CTRL_REQUEST,
 			       FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
 			       urb_value, priv->interface,
-			       buf, 0, WDR_TIMEOUT);
-
-	kfree(buf);
+			       NULL, 0, WDR_TIMEOUT);
 	if (rv < 0) {
 		dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
 				__func__,
@@ -1124,16 +1122,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char *buf;
 	__u16 urb_value;
 	__u16 urb_index;
 	__u32 urb_index_value;
 	int rv;
 
-	buf = kmalloc(1, GFP_NOIO);
-	if (!buf)
-		return -ENOMEM;
-
 	urb_index_value = get_ftdi_divisor(tty, port);
 	urb_value = (__u16)urb_index_value;
 	urb_index = (__u16)(urb_index_value >> 16);
@@ -1146,9 +1139,7 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
 			    FTDI_SIO_SET_BAUDRATE_REQUEST,
 			    FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
 			    urb_value, urb_index,
-			    buf, 0, WDR_SHORT_TIMEOUT);
-
-	kfree(buf);
+			    NULL, 0, WDR_SHORT_TIMEOUT);
 	return rv;
 }
 
@@ -1156,8 +1147,7 @@ static int write_latency_timer(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct usb_device *udev = port->serial->dev;
-	char buf[1];
-	int rv = 0;
+	int rv;
 	int l = priv->latency;
 
 	if (priv->flags & ASYNC_LOW_LATENCY)
@@ -1170,8 +1160,7 @@ static int write_latency_timer(struct usb_serial_port *port)
 			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
 			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
 			     l, priv->interface,
-			     buf, 0, WDR_TIMEOUT);
-
+			     NULL, 0, WDR_TIMEOUT);
 	if (rv < 0)
 		dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
 	return rv;
@@ -1181,24 +1170,29 @@ static int read_latency_timer(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct usb_device *udev = port->serial->dev;
-	unsigned short latency = 0;
-	int rv = 0;
-
+	unsigned char *buf;
+	int rv;
 
 	dbg("%s", __func__);
 
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
 	rv = usb_control_msg(udev,
 			     usb_rcvctrlpipe(udev, 0),
 			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
 			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
 			     0, priv->interface,
-			     (char *) &latency, 1, WDR_TIMEOUT);
-
-	if (rv < 0) {
+			     buf, 1, WDR_TIMEOUT);
+	if (rv < 0)
 		dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
-		return -EIO;
-	}
-	return latency;
+	else
+		priv->latency = buf[0];
+
+	kfree(buf);
+
+	return rv;
 }
 
 static int get_serial_info(struct usb_serial_port *port,
@@ -1229,7 +1223,7 @@ static int set_serial_info(struct tty_struct *tty,
 	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
 		return -EFAULT;
 
-	lock_kernel();
+	mutex_lock(&priv->cfg_lock);
 	old_priv = *priv;
 
 	/* Do error checking and permission checking */
@@ -1237,7 +1231,7 @@ static int set_serial_info(struct tty_struct *tty,
 	if (!capable(CAP_SYS_ADMIN)) {
 		if (((new_serial.flags & ~ASYNC_USR_MASK) !=
 		     (priv->flags & ~ASYNC_USR_MASK))) {
-			unlock_kernel();
+			mutex_unlock(&priv->cfg_lock);
 			return -EPERM;
 		}
 		priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
@@ -1248,7 +1242,7 @@ static int set_serial_info(struct tty_struct *tty,
 
 	if ((new_serial.baud_base != priv->baud_base) &&
 	    (new_serial.baud_base < 9600)) {
-	    	unlock_kernel();
+		mutex_unlock(&priv->cfg_lock);
 		return -EINVAL;
 	}
 
@@ -1278,11 +1272,11 @@ check_and_exit:
 	     (priv->flags & ASYNC_SPD_MASK)) ||
 	    (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
 	     (old_priv.custom_divisor != priv->custom_divisor))) {
-		unlock_kernel();
+		mutex_unlock(&priv->cfg_lock);
 		change_speed(tty, port);
 	}
 	else
-		unlock_kernel();
+		mutex_unlock(&priv->cfg_lock);
 	return 0;
 
 } /* set_serial_info */
@@ -1338,20 +1332,20 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 					__func__);
 		}
 	} else if (version < 0x200) {
-		/* Old device.  Assume its the original SIO. */
+		/* Old device.  Assume it's the original SIO. */
 		priv->chip_type = SIO;
 		priv->baud_base = 12000000 / 16;
 		priv->write_offset = 1;
 	} else if (version < 0x400) {
-		/* Assume its an FT8U232AM (or FT8U245AM) */
+		/* Assume it's an FT8U232AM (or FT8U245AM) */
 		/* (It might be a BM because of the iSerialNumber bug,
 		 * but it will still work as an AM device.) */
 		priv->chip_type = FT8U232AM;
 	} else if (version < 0x600) {
-		/* Assume its an FT232BM (or FT245BM) */
+		/* Assume it's an FT232BM (or FT245BM) */
 		priv->chip_type = FT232BM;
 	} else {
-		/* Assume its an FT232R  */
+		/* Assume it's an FT232R */
 		priv->chip_type = FT232RL;
 	}
 	dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
@@ -1371,7 +1365,7 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)
 	struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
 
 	unsigned num_endpoints;
-	int i = 0;
+	int i;
 
 	num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
 	dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
@@ -1423,7 +1417,7 @@ static ssize_t store_latency_timer(struct device *dev,
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int v = simple_strtoul(valbuf, NULL, 10);
-	int rv = 0;
+	int rv;
 
 	priv->latency = v;
 	rv = write_latency_timer(port);
@@ -1440,9 +1434,8 @@ static ssize_t store_event_char(struct device *dev,
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct usb_device *udev = port->serial->dev;
-	char buf[1];
 	int v = simple_strtoul(valbuf, NULL, 10);
-	int rv = 0;
+	int rv;
 
 	dbg("%s: setting event char = %i", __func__, v);
 
@@ -1451,8 +1444,7 @@ static ssize_t store_event_char(struct device *dev,
 			     FTDI_SIO_SET_EVENT_CHAR_REQUEST,
 			     FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
 			     v, priv->interface,
-			     buf, 0, WDR_TIMEOUT);
-
+			     NULL, 0, WDR_TIMEOUT);
 	if (rv < 0) {
 		dbg("Unable to write event character: %i", rv);
 		return -EIO;
@@ -1551,9 +1543,9 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	kref_init(&priv->kref);
 	spin_lock_init(&priv->tx_lock);
+	mutex_init(&priv->cfg_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
-	/* This will push the characters through immediately rather
-	   than queue a task to deliver them */
+
 	priv->flags = ASYNC_LOW_LATENCY;
 
 	if (quirk && quirk->port_probe)
@@ -1585,7 +1577,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	ftdi_determine_type(port);
 	ftdi_set_max_packet_size(port);
-	read_latency_timer(port);
+	if (read_latency_timer(port) < 0)
+		priv->latency = 16;
 	create_sysfs_attrs(port);
 	return 0;
 }
@@ -1630,8 +1623,6 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial)
 {
 	struct usb_device *udev = serial->dev;
 	int latency = ndi_latency_timer;
-	int rv = 0;
-	char buf[1];
 
 	if (latency == 0)
 		latency = 1;
@@ -1641,10 +1632,11 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial)
 	dbg("%s setting NDI device latency to %d", __func__, latency);
 	dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
 
-	rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+	/* FIXME: errors are not returned */
+	usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
 				FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
-				latency, 0, buf, 0, WDR_TIMEOUT);
+				latency, 0, NULL, 0, WDR_TIMEOUT);
 	return 0;
 }
 
@@ -1720,7 +1712,7 @@ static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
 			   urb->transfer_buffer_length,
 			   ftdi_read_bulk_callback, port);
 	result = usb_submit_urb(urb, mem_flags);
-	if (result)
+	if (result && result != -EPERM)
 		dev_err(&port->dev,
 			"%s - failed submitting read urb, error %d\n",
 							__func__, result);
@@ -1732,16 +1724,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-
-	int result = 0;
-	char buf[1]; /* Needed for the usb_control_msg I think */
+	int result;
 
 	dbg("%s", __func__);
 
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	priv->tx_bytes = 0;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-
 	write_latency_timer(port);
 
 	/* No error checking for this (will get errors later anyway) */
@@ -1749,7 +1735,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
 			FTDI_SIO_RESET_SIO,
-			priv->interface, buf, 0, WDR_TIMEOUT);
+			priv->interface, NULL, 0, WDR_TIMEOUT);
 
 	/* Termios defaults are set by usb_serial_init. We don't change
 	   port->tty->termios - this would lose speed settings, etc.
@@ -1777,7 +1763,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char buf[1];
 
 	mutex_lock(&port->serial->disc_mutex);
 	if (!port->serial->disconnected) {
@@ -1786,7 +1771,7 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
 			    usb_sndctrlpipe(port->serial->dev, 0),
 			    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
 			    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
-			    0, priv->interface, buf, 0,
+			    0, priv->interface, NULL, 0,
 			    WDR_TIMEOUT) < 0) {
 			    dev_err(&port->dev, "error from flowcontrol urb\n");
 		}
@@ -1847,7 +1832,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
 		spin_unlock_irqrestore(&priv->tx_lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dbg("%s - write limit hit", __func__);
 		return 0;
 	}
 	priv->tx_outstanding_urbs++;
@@ -1927,7 +1912,6 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	} else {
 		spin_lock_irqsave(&priv->tx_lock, flags);
 		priv->tx_outstanding_bytes += count;
-		priv->tx_bytes += count;
 		spin_unlock_irqrestore(&priv->tx_lock, flags);
 	}
 
@@ -2154,8 +2138,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	__u16 urb_value = 0;
-	char buf[1];
+	__u16 urb_value;
 
 	/* break_state = -1 to turn on break, and 0 to turn off break */
 	/* see drivers/char/tty_io.c to see it used */
@@ -2171,7 +2154,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 			FTDI_SIO_SET_DATA_REQUEST,
 			FTDI_SIO_SET_DATA_REQUEST_TYPE,
 			urb_value , priv->interface,
-			buf, 0, WDR_TIMEOUT) < 0) {
+			NULL, 0, WDR_TIMEOUT) < 0) {
 		dev_err(&port->dev, "%s FAILED to enable/disable break state "
 			"(state was %d)\n", __func__, break_state);
 	}
@@ -2195,7 +2178,6 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	struct ktermios *termios = tty->termios;
 	unsigned int cflag = termios->c_cflag;
 	__u16 urb_value; /* will hold the new flags */
-	char buf[1]; /* Perhaps I should dynamically alloc this? */
 
 	/* Added for xon/xoff support */
 	unsigned int iflag = termios->c_iflag;
@@ -2246,12 +2228,10 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	}
 	if (cflag & CSIZE) {
 		switch (cflag & CSIZE) {
-		case CS5: urb_value |= 5; dbg("Setting CS5"); break;
-		case CS6: urb_value |= 6; dbg("Setting CS6"); break;
 		case CS7: urb_value |= 7; dbg("Setting CS7"); break;
 		case CS8: urb_value |= 8; dbg("Setting CS8"); break;
 		default:
-			dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n");
+			dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n");
 		}
 	}
 
@@ -2263,7 +2243,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 			    FTDI_SIO_SET_DATA_REQUEST,
 			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
 			    urb_value , priv->interface,
-			    buf, 0, WDR_SHORT_TIMEOUT) < 0) {
+			    NULL, 0, WDR_SHORT_TIMEOUT) < 0) {
 		dev_err(&port->dev, "%s FAILED to set "
 			"databits/stopbits/parity\n", __func__);
 	}
@@ -2275,7 +2255,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 				    0, priv->interface,
-				    buf, 0, WDR_TIMEOUT) < 0) {
+				    NULL, 0, WDR_TIMEOUT) < 0) {
 			dev_err(&port->dev,
 				"%s error from disable flowcontrol urb\n",
 				__func__);
@@ -2301,7 +2281,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 				    0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
-				    buf, 0, WDR_TIMEOUT) < 0) {
+				    NULL, 0, WDR_TIMEOUT) < 0) {
 			dev_err(&port->dev,
 				"urb failed to set to rts/cts flow control\n");
 		}
@@ -2333,7 +2313,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 					    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 					    urb_value , (FTDI_SIO_XON_XOFF_HS
 							 | priv->interface),
-					    buf, 0, WDR_TIMEOUT) < 0) {
+					    NULL, 0, WDR_TIMEOUT) < 0) {
 				dev_err(&port->dev, "urb failed to set to "
 					"xon/xoff flow control\n");
 			}
@@ -2347,7 +2327,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 					    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
 					    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 					    0, priv->interface,
-					    buf, 0, WDR_TIMEOUT) < 0) {
+					    NULL, 0, WDR_TIMEOUT) < 0) {
 				dev_err(&port->dev,
 					"urb failed to clear flow control\n");
 			}
@@ -2361,21 +2341,22 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	unsigned char buf[2];
+	unsigned char *buf;
+	int len;
 	int ret;
 
 	dbg("%s TIOCMGET", __func__);
+
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	/*
+	 * The 8U232AM returns a two byte value (the SIO a 1 byte value) in
+	 * the same format as the data returned from the in point.
+	 */
 	switch (priv->chip_type) {
 	case SIO:
-		/* Request the status from the device */
-		ret = usb_control_msg(port->serial->dev,
-			   usb_rcvctrlpipe(port->serial->dev, 0),
-			   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
-			   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
-			   0, 0,
-			   buf, 1, WDR_TIMEOUT);
-		if (ret < 0)
-			return ret;
+		len = 1;
 		break;
 	case FT8U232AM:
 	case FT232BM:
@@ -2383,27 +2364,30 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 	case FT232RL:
 	case FT2232H:
 	case FT4232H:
-		/* the 8U232AM returns a two byte value (the sio is a 1 byte
-		   value) - in the same format as the data returned from the in
-		   point */
-		ret = usb_control_msg(port->serial->dev,
-				   usb_rcvctrlpipe(port->serial->dev, 0),
-				   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
-				   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
-				   0, priv->interface,
-				   buf, 2, WDR_TIMEOUT);
-		if (ret < 0)
-			return ret;
+		len = 2;
 		break;
 	default:
-		return -EFAULT;
+		ret = -EFAULT;
+		goto out;
 	}
 
-	return  (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
+	ret = usb_control_msg(port->serial->dev,
+			usb_rcvctrlpipe(port->serial->dev, 0),
+			FTDI_SIO_GET_MODEM_STATUS_REQUEST,
+			FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
+			0, priv->interface,
+			buf, len, WDR_TIMEOUT);
+	if (ret < 0)
+		goto out;
+
+	ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
 		(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
 		(buf[0]  & FTDI_SIO_RI_MASK  ? TIOCM_RI  : 0) |
 		(buf[0]  & FTDI_SIO_RLSD_MASK ? TIOCM_CD  : 0) |
 		priv->last_dtr_rts;
+out:
+	kfree(buf);
+	return ret;
 }
 
 static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
@@ -2508,8 +2492,7 @@ void ftdi_unthrottle(struct tty_struct *tty)
 	port->throttled = port->throttle_req = 0;
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	/* Resubmit urb if throttled and open. */
-	if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+	if (was_throttled)
 		ftdi_submit_read_urb(port, GFP_KERNEL);
 }
 
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index b0e0d64f822e..ff9bf80327a3 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -28,13 +28,13 @@
 #define FTDI_SIO_SET_FLOW_CTRL	2 /* Set flow control register */
 #define FTDI_SIO_SET_BAUD_RATE	3 /* Set baud rate */
 #define FTDI_SIO_SET_DATA	4 /* Set the data characteristics of the port */
-#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modern status register */
+#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modem status register */
 #define FTDI_SIO_SET_EVENT_CHAR	6 /* Set the event character */
 #define FTDI_SIO_SET_ERROR_CHAR	7 /* Set the error character */
 #define FTDI_SIO_SET_LATENCY_TIMER	9 /* Set the latency timer */
 #define FTDI_SIO_GET_LATENCY_TIMER	10 /* Get the latency timer */
 
-/* Interface indicies for FT2232, FT2232H and FT4232H devices*/
+/* Interface indices for FT2232, FT2232H and FT4232H devices */
 #define INTERFACE_A		1
 #define INTERFACE_B		2
 #define INTERFACE_C		3
@@ -270,7 +270,7 @@ typedef enum {
  *   BmRequestType:  0100 0000b
  *   bRequest:       FTDI_SIO_SET_FLOW_CTRL
  *   wValue:         Xoff/Xon
- *   wIndex:         Protocol/Port - hIndex is protocl / lIndex is port
+ *   wIndex:         Protocol/Port - hIndex is protocol / lIndex is port
  *   wLength:        0
  *   Data:           None
  *
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index c8951aeed983..0727e198503e 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -22,7 +22,7 @@
 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
 #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
-#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX  */
+#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX */
 #define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
 
 
@@ -49,7 +49,7 @@
 #define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
 #define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
 
-#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
 
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID	0xBFD8
@@ -185,7 +185,7 @@
 #define FTDI_ELV_TFD128_PID	0xE0EC	/* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
 #define FTDI_ELV_FM3RX_PID	0xE0ED	/* ELV Messwertuebertragung FM3 RX */
 #define FTDI_ELV_WS777_PID	0xE0EE	/* Conrad WS 777 */
-#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
+#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Energy monitor EM 1010 PC */
 #define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
 #define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
 #define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
@@ -212,8 +212,8 @@
  * drivers, or possibly the Comedi drivers in some cases. */
 #define FTDI_ELV_CLI7000_PID	0xFB59	/* Computer-Light-Interface (CLI 7000) */
 #define FTDI_ELV_PPS7330_PID	0xFB5C	/* Processor-Power-Supply (PPS 7330) */
-#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperartur-Feuchte Messgeraet (TFM 100) */
-#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkurh (UDF 77) */
+#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperatur-Feuchte-Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkuhr (UDF 77) */
 #define FTDI_ELV_UIO88_PID	0xFB5F	/* USB-I/O Interface (UIO 88) */
 
 /*
@@ -320,7 +320,7 @@
 
 /*
  * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
- * USB-TTY activ, USB-TTY passiv.  Some PIDs are used by several devices
+ * USB-TTY aktiv, USB-TTY passiv.  Some PIDs are used by several devices
  * and I'm not entirely sure which are used by which.
  */
 #define FTDI_4N_GALAXY_DE_1_PID	0xF3C0
@@ -330,10 +330,10 @@
  * Linx Technologies product ids
  */
 #define LINX_SDMUSBQSS_PID	0xF448	/* Linx SDM-USB-QS-S */
-#define LINX_MASTERDEVEL2_PID   0xF449   /* Linx Master Development 2.0 */
-#define LINX_FUTURE_0_PID   0xF44A   /* Linx future device */
-#define LINX_FUTURE_1_PID   0xF44B   /* Linx future device */
-#define LINX_FUTURE_2_PID   0xF44C   /* Linx future device */
+#define LINX_MASTERDEVEL2_PID   0xF449	/* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID   0xF44A	/* Linx future device */
+#define LINX_FUTURE_1_PID   0xF44B	/* Linx future device */
+#define LINX_FUTURE_2_PID   0xF44C	/* Linx future device */
 
 /*
  * Oceanic product ids
@@ -494,6 +494,13 @@
 #define RATOC_PRODUCT_ID_USB60F	0xb020
 
 /*
+ * Contec products (http://www.contec.com)
+ * Submitted by Daniel Sangorrin
+ */
+#define CONTEC_VID		0x06CE	/* Vendor ID */
+#define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
+
+/*
  * Definitions for B&B Electronics products.
  */
 #define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
@@ -642,7 +649,7 @@
 #define FALCOM_TWIST_PID	0x0001	/* Falcom Twist USB GPRS modem */
 #define FALCOM_SAMBA_PID	0x0005	/* Falcom Samba USB GPRS modem */
 
-/* Larsen and Brusgaard AltiTrack/USBtrack  */
+/* Larsen and Brusgaard AltiTrack/USBtrack */
 #define LARSENBRUSGAARD_VID		0x0FD8
 #define LB_ALTITRACK_PID		0x0001
 
@@ -971,7 +978,7 @@
 #define ALTI2_N3_PID	0x6001	/* Neptune 3 */
 
 /*
- * Dresden Elektronic Sensor Terminal Board
+ * Dresden Elektronik Sensor Terminal Board
  */
 #define DE_VID			0x1cf1 /* Vendor ID */
 #define STB_PID			0x0001 /* Sensor Terminal Board */
@@ -1002,3 +1009,11 @@
 #define EVO_8U232AM_PID	0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
 #define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/
 #define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID */
+
+/*
+ * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403)
+ */
+#define MJSG_GENERIC_PID	0x9378
+#define MJSG_SR_RADIO_PID	0x9379
+#define MJSG_XM_RADIO_PID	0x937A
+#define MJSG_HD_RADIO_PID	0x937C
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index d30f736d2cc5..e21ce9ddfc63 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -18,7 +18,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1404, 0xcddc) },
 	{ },
 };
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 5ac900e5a50e..a42b29a695b2 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -210,7 +210,7 @@ static unsigned char const PRIVATE_REQ[]
 
 
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	/* the same device id seems to be used by all
 	   usb enabled GPS devices */
 	{ USB_DEVICE(GARMIN_VENDOR_ID, 3) },
@@ -271,7 +271,6 @@ static void send_to_tty(struct usb_serial_port *port,
 		usb_serial_debug_data(debug, &port->dev,
 					__func__, actual_length, data);
 
-		tty_buffer_request_room(tty, actual_length);
 		tty_insert_flip_string(tty, data, actual_length);
 		tty_flip_buffer_push(tty);
 	}
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 83443d6306d6..89fac36684c5 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -20,6 +20,7 @@
 #include <linux/usb/serial.h>
 #include <linux/uaccess.h>
 #include <linux/kfifo.h>
+#include <linux/serial.h>
 
 static int debug;
 
@@ -41,7 +42,7 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
 
 /* we want to look at all devices, as the vendor/product id can change
  * depending on the command line argument */
-static struct usb_device_id generic_serial_ids[] = {
+static const struct usb_device_id generic_serial_ids[] = {
 	{.driver_info = 42},
 	{}
 };
@@ -194,7 +195,7 @@ static int usb_serial_multi_urb_write(struct tty_struct *tty,
 		if (port->urbs_in_flight >
 		    port->serial->type->max_in_flight_urbs) {
 			spin_unlock_irqrestore(&port->lock, flags);
-			dbg("%s - write limit hit\n", __func__);
+			dbg("%s - write limit hit", __func__);
 			return bwrite;
 		}
 		port->tx_bytes_flight += towrite;
@@ -585,7 +586,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
-		if (!port->port.count)
+		if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
 			continue;
 
 		if (port->read_urb) {
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 431329275133..809379159b0e 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -29,7 +29,7 @@
 #define HP_VENDOR_ID 0x03f0
 #define HP49GP_PRODUCT_ID 0x0121
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(HP_VENDOR_ID, HP49GP_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index b97960ac92f2..3ef8df0ef888 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -364,42 +364,6 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
 	release_firmware(fw);
 }
 
-
-/************************************************************************
- *									*
- *  Get string descriptor from device					*
- *									*
- ************************************************************************/
-static int get_string(struct usb_device *dev, int Id, char *string, int buflen)
-{
-	struct usb_string_descriptor StringDesc;
-	struct usb_string_descriptor *pStringDesc;
-
-	dbg("%s - USB String ID = %d", __func__, Id);
-
-	if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
-					&StringDesc, sizeof(StringDesc)))
-		return 0;
-
-	pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
-	if (!pStringDesc)
-		return 0;
-
-	if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
-					pStringDesc, StringDesc.bLength)) {
-		kfree(pStringDesc);
-		return 0;
-	}
-
-	unicode_to_ascii(string, buflen,
-				pStringDesc->wData, pStringDesc->bLength/2);
-
-	kfree(pStringDesc);
-	dbg("%s - USB String %s", __func__, string);
-	return strlen(string);
-}
-
-
 #if 0
 /************************************************************************
  *
@@ -2007,7 +1971,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 			return;
 
 		case IOSP_EXT_STATUS_RX_CHECK_RSP:
-			dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3);
+			dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============", __func__, edge_serial->rxPort, byte3);
 			/* Port->RxCheckRsp = true; */
 			return;
 		}
@@ -2075,7 +2039,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 		break;
 
 	default:
-		dbg("%s - Unrecognized IOSP status code %u\n", __func__, code);
+		dbg("%s - Unrecognized IOSP status code %u", __func__, code);
 		break;
 	}
 	return;
@@ -2091,18 +2055,13 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
 {
 	int cnt;
 
-	do {
-		cnt = tty_buffer_request_room(tty, length);
-		if (cnt < length) {
-			dev_err(dev, "%s - dropping data, %d bytes lost\n",
-					__func__, length - cnt);
-			if (cnt == 0)
-				break;
-		}
-		tty_insert_flip_string(tty, data, cnt);
-		data += cnt;
-		length -= cnt;
-	} while (length > 0);
+	cnt = tty_insert_flip_string(tty, data, length);
+	if (cnt < length) {
+		dev_err(dev, "%s - dropping data, %d bytes lost\n",
+				__func__, length - cnt);
+	}
+	data += cnt;
+	length -= cnt;
 
 	tty_flip_buffer_push(tty);
 }
@@ -2530,7 +2489,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor)
 
 		*divisor = custom;
 
-		dbg("%s - Baud %d = %d\n", __func__, baudrate, custom);
+		dbg("%s - Baud %d = %d", __func__, baudrate, custom);
 		return 0;
 	}
 
@@ -2915,7 +2874,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 			break;
 
 		case EDGE_DOWNLOAD_FILE_NONE:
-			dbg     ("No download file specified, skipping download\n");
+			dbg("No download file specified, skipping download");
 			return;
 
 		default:
@@ -2997,10 +2956,12 @@ static int edge_startup(struct usb_serial *serial)
 	usb_set_serial_data(serial, edge_serial);
 
 	/* get the name for the device from the device */
-	i = get_string(dev, dev->descriptor.iManufacturer,
+	i = usb_string(dev, dev->descriptor.iManufacturer,
 	    &edge_serial->name[0], MAX_NAME_LEN+1);
+	if (i < 0)
+		i = 0;
 	edge_serial->name[i++] = ' ';
-	get_string(dev, dev->descriptor.iProduct,
+	usb_string(dev, dev->descriptor.iProduct,
 	    &edge_serial->name[i], MAX_NAME_LEN+2 - i);
 
 	dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 9241d3147513..feb56a4ca799 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -14,7 +14,7 @@
 #ifndef IO_TABLES_H
 #define IO_TABLES_H
 
-static struct usb_device_id edgeport_2port_id_table [] = {
+static const struct usb_device_id edgeport_2port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) },
@@ -23,7 +23,7 @@ static struct usb_device_id edgeport_2port_id_table [] = {
 	{ }
 };
 
-static struct usb_device_id edgeport_4port_id_table [] = {
+static const struct usb_device_id edgeport_4port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) },
@@ -37,7 +37,7 @@ static struct usb_device_id edgeport_4port_id_table [] = {
 	{ }
 };
 
-static struct usb_device_id edgeport_8port_id_table [] = {
+static const struct usb_device_id edgeport_8port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) },
@@ -47,7 +47,7 @@ static struct usb_device_id edgeport_8port_id_table [] = {
 	{ }
 };
 
-static struct usb_device_id Epic_port_id_table [] = {
+static const struct usb_device_id Epic_port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) },
 	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) },
 	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) },
@@ -60,7 +60,7 @@ static struct usb_device_id Epic_port_id_table [] = {
 };
 
 /* Devices that this driver supports */
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_RAPIDPORT_4) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4T) },
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index d4cc0f7af400..aa876f71f228 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -134,7 +134,7 @@ struct edgeport_serial {
 
 
 /* Devices that this driver supports */
-static struct usb_device_id edgeport_1port_id_table [] = {
+static const struct usb_device_id edgeport_1port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
@@ -154,7 +154,7 @@ static struct usb_device_id edgeport_1port_id_table [] = {
 	{ }
 };
 
-static struct usb_device_id edgeport_2port_id_table [] = {
+static const struct usb_device_id edgeport_2port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
@@ -177,7 +177,7 @@ static struct usb_device_id edgeport_2port_id_table [] = {
 };
 
 /* Devices that this driver supports */
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
@@ -413,11 +413,18 @@ static int write_boot_mem(struct edgeport_serial *serial,
 {
 	int status = 0;
 	int i;
-	__u8 temp;
+	u8 *temp;
 
 	/* Must do a read before write */
 	if (!serial->TiReadI2C) {
-		status = read_boot_mem(serial, 0, 1, &temp);
+		temp = kmalloc(1, GFP_KERNEL);
+		if (!temp) {
+			dev_err(&serial->serial->dev->dev,
+					"%s - out of memory\n", __func__);
+			return -ENOMEM;
+		}
+		status = read_boot_mem(serial, 0, 1, temp);
+		kfree(temp);
 		if (status)
 			return status;
 	}
@@ -935,37 +942,47 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev)
 static int i2c_type_bootmode(struct edgeport_serial *serial)
 {
 	int status;
-	__u8 data;
+	u8 *data;
+
+	data = kmalloc(1, GFP_KERNEL);
+	if (!data) {
+		dev_err(&serial->serial->dev->dev,
+				"%s - out of memory\n", __func__);
+		return -ENOMEM;
+	}
 
 	/* Try to read type 2 */
 	status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
-				DTK_ADDR_SPACE_I2C_TYPE_II, 0, &data, 0x01);
+				DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01);
 	if (status)
 		dbg("%s - read 2 status error = %d", __func__, status);
 	else
-		dbg("%s - read 2 data = 0x%x", __func__, data);
-	if ((!status) && (data == UMP5152 || data == UMP3410)) {
+		dbg("%s - read 2 data = 0x%x", __func__, *data);
+	if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
 		dbg("%s - ROM_TYPE_II", __func__);
 		serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
-		return 0;
+		goto out;
 	}
 
 	/* Try to read type 3 */
 	status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
-				DTK_ADDR_SPACE_I2C_TYPE_III, 0,	&data, 0x01);
+				DTK_ADDR_SPACE_I2C_TYPE_III, 0,	data, 0x01);
 	if (status)
 		dbg("%s - read 3 status error = %d", __func__, status);
 	else
-		dbg("%s - read 2 data = 0x%x", __func__, data);
-	if ((!status) && (data == UMP5152 || data == UMP3410)) {
+		dbg("%s - read 2 data = 0x%x", __func__, *data);
+	if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
 		dbg("%s - ROM_TYPE_III", __func__);
 		serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
-		return 0;
+		goto out;
 	}
 
 	dbg("%s - Unknown", __func__);
 	serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
-	return -ENODEV;
+	status = -ENODEV;
+out:
+	kfree(data);
+	return status;
 }
 
 static int bulk_xfer(struct usb_serial *serial, void *buffer,
@@ -1113,7 +1130,7 @@ static int download_fw(struct edgeport_serial *serial)
 				I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc);
 		if (start_address != 0) {
 			struct ti_i2c_firmware_rec *firmware_version;
-			__u8 record;
+			u8 *record;
 
 			dbg("%s - Found Type FIRMWARE (Type 2) record",
 								__func__);
@@ -1165,6 +1182,15 @@ static int download_fw(struct edgeport_serial *serial)
 				    OperationalMajorVersion,
 				    OperationalMinorVersion);
 
+				record = kmalloc(1, GFP_KERNEL);
+				if (!record) {
+					dev_err(dev, "%s - out of memory.\n",
+							__func__);
+					kfree(firmware_version);
+					kfree(rom_desc);
+					kfree(ti_manuf_desc);
+					return -ENOMEM;
+				}
 				/* In order to update the I2C firmware we must
 				 * change the type 2 record to type 0xF2. This
 				 * will force the UMP to come up in Boot Mode.
@@ -1177,13 +1203,14 @@ static int download_fw(struct edgeport_serial *serial)
 				 * firmware will update the record type from
 				 * 0xf2 to 0x02.
 				 */
-				record = I2C_DESC_TYPE_FIRMWARE_BLANK;
+				*record = I2C_DESC_TYPE_FIRMWARE_BLANK;
 
 				/* Change the I2C Firmware record type to
 				   0xf2 to trigger an update */
 				status = write_rom(serial, start_address,
-						sizeof(record),	&record);
+						sizeof(*record), record);
 				if (status) {
+					kfree(record);
 					kfree(firmware_version);
 					kfree(rom_desc);
 					kfree(ti_manuf_desc);
@@ -1196,19 +1223,21 @@ static int download_fw(struct edgeport_serial *serial)
 				 */
 				status = read_rom(serial,
 							start_address,
-							sizeof(record),
-							&record);
+							sizeof(*record),
+							record);
 				if (status) {
+					kfree(record);
 					kfree(firmware_version);
 					kfree(rom_desc);
 					kfree(ti_manuf_desc);
 					return status;
 				}
 
-				if (record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
+				if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
 					dev_err(dev,
 						"%s - error resetting device\n",
 						__func__);
+					kfree(record);
 					kfree(firmware_version);
 					kfree(rom_desc);
 					kfree(ti_manuf_desc);
@@ -1226,6 +1255,7 @@ static int download_fw(struct edgeport_serial *serial)
 						__func__, status);
 
 				/* return an error on purpose. */
+				kfree(record);
 				kfree(firmware_version);
 				kfree(rom_desc);
 				kfree(ti_manuf_desc);
@@ -1686,7 +1716,7 @@ static void edge_interrupt_callback(struct urb *urb)
 	case TIUMP_INTERRUPT_CODE_MSR:	/* MSR */
 		/* Copy MSR from UMP */
 		msr = data[1];
-		dbg("%s - ===== Port %u MSR Status = %02x ======\n",
+		dbg("%s - ===== Port %u MSR Status = %02x ======",
 		     __func__, port_number, msr);
 		handle_new_msr(edge_port, msr);
 		break;
@@ -1790,7 +1820,6 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
 {
 	int queued;
 
-	tty_buffer_request_room(tty, length);
 	queued = tty_insert_flip_string(tty, data, length);
 	if (queued < length)
 		dev_err(dev, "%s - dropping data, %d bytes lost\n",
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index d6231c38813e..3fea9298eb15 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -747,7 +747,6 @@ static void ipaq_read_bulk_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 		bytes_in += urb->actual_length;
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 727d323f092a..e1d07840cee6 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -134,7 +134,7 @@ enum {
 
 #define IPW_WANTS_TO_SEND	0x30
 
-static struct usb_device_id usb_ipw_ids[] = {
+static const struct usb_device_id usb_ipw_ids[] = {
 	{ USB_DEVICE(IPW_VID, IPW_PID) },
 	{ },
 };
@@ -172,7 +172,6 @@ static void ipw_read_bulk_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 95d8d26b9a44..4a0f51974232 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -100,7 +100,7 @@ static u8 ir_baud;
 static u8 ir_xbof;
 static u8 ir_add_bof;
 
-static struct usb_device_id ir_id_table[] = {
+static const struct usb_device_id ir_id_table[] = {
 	{ USB_DEVICE(0x050f, 0x0180) },		/* KC Technology, KC-180 */
 	{ USB_DEVICE(0x08e9, 0x0100) },		/* XTNDAccess */
 	{ USB_DEVICE(0x09c4, 0x0011) },		/* ACTiSys ACT-IR2000U */
@@ -445,11 +445,6 @@ static void ir_read_bulk_callback(struct urb *urb)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (!port->port.count) {
-		dbg("%s - port closed.", __func__);
-		return;
-	}
-
 	switch (status) {
 	case 0: /* Successful */
 		/*
@@ -462,10 +457,8 @@ static void ir_read_bulk_callback(struct urb *urb)
 		usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
 		tty = tty_port_tty_get(&port->port);
-		if (tty_buffer_request_room(tty, urb->actual_length - 1)) {
-			tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
-			tty_flip_buffer_push(tty);
-		}
+		tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
+		tty_flip_buffer_push(tty);
 		tty_kref_put(tty);
 
 		/*
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index e6e02b178d2b..43f13cf2f016 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -43,7 +43,7 @@ static int debug;
 #define DRIVER_VERSION "v0.11"
 #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(IUU_USB_VENDOR_ID, IUU_USB_PRODUCT_ID)},
 	{}			/* Terminating entry */
 };
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index f8c4b07033ff..297163c3c610 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -464,13 +464,9 @@ static void	usa26_indat_callback(struct urb *urb)
 
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->port.count) {
-		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err != 0)
-			dbg("%s - resubmit read urb failed. (%d)",
-					__func__, err);
-	}
-	return;
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 }
 
 /* Outdat handling is common for all devices */
@@ -483,8 +479,7 @@ static void	usa2x_outdat_callback(struct urb *urb)
 	p_priv = usb_get_serial_port_data(port);
 	dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);
 
-	if (port->port.count)
-		usb_serial_port_softint(port);
+	usb_serial_port_softint(port);
 }
 
 static void	usa26_inack_callback(struct urb *urb)
@@ -615,12 +610,10 @@ static void usa28_indat_callback(struct urb *urb)
 
 		/* Resubmit urb so we continue receiving */
 		urb->dev = port->serial->dev;
-		if (port->port.count) {
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err != 0)
-				dbg("%s - resubmit read urb failed. (%d)",
-								__func__, err);
-		}
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err != 0)
+			dbg("%s - resubmit read urb failed. (%d)",
+							__func__, err);
 		p_priv->in_flip ^= 1;
 
 		urb = p_priv->in_urbs[p_priv->in_flip];
@@ -856,12 +849,9 @@ static void	usa49_indat_callback(struct urb *urb)
 
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->port.count) {
-		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err != 0)
-			dbg("%s - resubmit read urb failed. (%d)",
-							__func__, err);
-	}
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 }
 
 static void usa49wg_indat_callback(struct urb *urb)
@@ -904,11 +894,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 				/* no error on any byte */
 				i++;
 				for (x = 1; x < len ; ++x)
-					if (port->port.count)
-						tty_insert_flip_char(tty,
-								data[i++], 0);
-					else
-						i++;
+					tty_insert_flip_char(tty, data[i++], 0);
 			} else {
 				/*
 				 * some bytes had errors, every byte has status
@@ -922,14 +908,12 @@ static void usa49wg_indat_callback(struct urb *urb)
 					if (stat & RXERROR_PARITY)
 						flag |= TTY_PARITY;
 					/* XXX should handle break (0x10) */
-					if (port->port.count)
-						tty_insert_flip_char(tty,
+					tty_insert_flip_char(tty,
 							data[i+1], flag);
 					i += 2;
 				}
 			}
-			if (port->port.count)
-				tty_flip_buffer_push(tty);
+			tty_flip_buffer_push(tty);
 			tty_kref_put(tty);
 		}
 	}
@@ -1013,13 +997,9 @@ static void usa90_indat_callback(struct urb *urb)
 
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->port.count) {
-		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err != 0)
-			dbg("%s - resubmit read urb failed. (%d)",
-							__func__, err);
-	}
-	return;
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 }
 
 
@@ -2418,8 +2398,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 		msg.portEnabled = 0;
 	/* Sending intermediate configs */
 	else {
-		if (port->port.count)
-			msg.portEnabled = 1;
+		msg.portEnabled = 1;
 		msg.txBreak = (p_priv->break_on);
 	}
 
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 30771e5b3973..bf3297ddd186 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -456,7 +456,7 @@ static const struct keyspan_device_details *keyspan_devices[] = {
 	NULL,
 };
 
-static struct usb_device_id keyspan_ids_combined[] = {
+static const struct usb_device_id keyspan_ids_combined[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
@@ -497,7 +497,7 @@ static struct usb_driver keyspan_driver = {
 };
 
 /* usb_device_id table for the pre-firmware download keyspan devices */
-static struct usb_device_id keyspan_pre_ids[] = {
+static const struct usb_device_id keyspan_pre_ids[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
@@ -513,7 +513,7 @@ static struct usb_device_id keyspan_pre_ids[] = {
 	{ } /* Terminating entry */
 };
 
-static struct usb_device_id keyspan_1port_ids[] = {
+static const struct usb_device_id keyspan_1port_ids[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
@@ -524,7 +524,7 @@ static struct usb_device_id keyspan_1port_ids[] = {
 	{ } /* Terminating entry */
 };
 
-static struct usb_device_id keyspan_2port_ids[] = {
+static const struct usb_device_id keyspan_2port_ids[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
@@ -532,7 +532,7 @@ static struct usb_device_id keyspan_2port_ids[] = {
 	{ } /* Terminating entry */
 };
 
-static struct usb_device_id keyspan_4port_ids[] = {
+static const struct usb_device_id keyspan_4port_ids[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 84f08e968e0b..185fe9a7d4e0 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -125,7 +125,7 @@ struct keyspan_pda_private {
 #define ENTREGRA_VENDOR_ID		0x1645
 #define ENTREGRA_FAKE_ID		0x8093
 
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 #ifdef KEYSPAN
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
 #endif
@@ -147,20 +147,20 @@ static struct usb_driver keyspan_pda_driver = {
 	.no_dynamic_id = 	1,
 };
 
-static struct usb_device_id id_table_std [] = {
+static const struct usb_device_id id_table_std[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
 	{ }						/* Terminating entry */
 };
 
 #ifdef KEYSPAN
-static struct usb_device_id id_table_fake [] = {
+static const struct usb_device_id id_table_fake[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
 	{ }						/* Terminating entry */
 };
 #endif
 
 #ifdef XIRCOM
-static struct usb_device_id id_table_fake_xircom [] = {
+static const struct usb_device_id id_table_fake_xircom[] = {
 	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
 	{ USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
 	{ }
@@ -429,13 +429,20 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial,
 				      unsigned char *value)
 {
 	int rc;
-	unsigned char data;
+	u8 *data;
+
+	data = kmalloc(1, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			     3, /* get pins */
 			     USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN,
-			     0, 0, &data, 1, 2000);
+			     0, 0, data, 1, 2000);
 	if (rc >= 0)
-		*value = data;
+		*value = *data;
+
+	kfree(data);
 	return rc;
 }
 
@@ -543,7 +550,14 @@ static int keyspan_pda_write(struct tty_struct *tty,
 	   device how much room it really has.  This is done only on
 	   scheduler time, since usb_control_msg() sleeps. */
 	if (count > priv->tx_room && !in_interrupt()) {
-		unsigned char room;
+		u8 *room;
+
+		room = kmalloc(1, GFP_KERNEL);
+		if (!room) {
+			rc = -ENOMEM;
+			goto exit;
+		}
+
 		rc = usb_control_msg(serial->dev,
 				     usb_rcvctrlpipe(serial->dev, 0),
 				     6, /* write_room */
@@ -551,9 +565,14 @@ static int keyspan_pda_write(struct tty_struct *tty,
 				     | USB_DIR_IN,
 				     0, /* value: 0 means "remaining room" */
 				     0, /* index */
-				     &room,
+				     room,
 				     1,
 				     2000);
+		if (rc > 0) {
+			dbg(" roomquery says %d", *room);
+			priv->tx_room = *room;
+		}
+		kfree(room);
 		if (rc < 0) {
 			dbg(" roomquery failed");
 			goto exit;
@@ -563,8 +582,6 @@ static int keyspan_pda_write(struct tty_struct *tty,
 			rc = -EIO; /* device didn't return any data */
 			goto exit;
 		}
-		dbg(" roomquery says %d", room);
-		priv->tx_room = room;
 	}
 	if (count > priv->tx_room) {
 		/* we're about to completely fill the Tx buffer, so
@@ -684,18 +701,22 @@ static int keyspan_pda_open(struct tty_struct *tty,
 					struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
-	unsigned char room;
+	u8 *room;
 	int rc = 0;
 	struct keyspan_pda_private *priv;
 
 	/* find out how much room is in the Tx ring */
+	room = kmalloc(1, GFP_KERNEL);
+	if (!room)
+		return -ENOMEM;
+
 	rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			     6, /* write_room */
 			     USB_TYPE_VENDOR | USB_RECIP_INTERFACE
 			     | USB_DIR_IN,
 			     0, /* value */
 			     0, /* index */
-			     &room,
+			     room,
 			     1,
 			     2000);
 	if (rc < 0) {
@@ -708,8 +729,8 @@ static int keyspan_pda_open(struct tty_struct *tty,
 		goto error;
 	}
 	priv = usb_get_serial_port_data(port);
-	priv->tx_room = room;
-	priv->tx_throttled = room ? 0 : 1;
+	priv->tx_room = *room;
+	priv->tx_throttled = *room ? 0 : 1;
 
 	/*Start reading from the device*/
 	port->interrupt_in_urb->dev = serial->dev;
@@ -718,8 +739,8 @@ static int keyspan_pda_open(struct tty_struct *tty,
 		dbg("%s - usb_submit_urb(read int) failed", __func__);
 		goto error;
 	}
-
 error:
+	kfree(room);
 	return rc;
 }
 static void keyspan_pda_close(struct usb_serial_port *port)
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 3a7873806f46..8eef91ba4b1c 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -94,7 +94,7 @@ static int  klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
 /*
  * All of the device info needed for the KLSI converters.
  */
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) },
 	{ USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) },
 	{ }		/* Terminating entry */
@@ -212,10 +212,19 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 				   unsigned long *line_state_p)
 {
 	int rc;
-	__u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1};
+	u8 *status_buf;
 	__u16 status;
 
 	dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
+
+	status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL);
+	if (!status_buf) {
+		dev_err(&port->dev, "%s - out of memory for status buffer.\n",
+				__func__);
+		return -ENOMEM;
+	}
+	status_buf[0] = 0xff;
+	status_buf[1] = 0xff;
 	rc = usb_control_msg(port->serial->dev,
 			     usb_rcvctrlpipe(port->serial->dev, 0),
 			     KL5KUSB105A_SIO_POLL,
@@ -236,6 +245,8 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 
 		*line_state_p = klsi_105_status2linestate(status);
 	}
+
+	kfree(status_buf);
 	return rc;
 }
 
@@ -364,7 +375,7 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	int rc;
 	int i;
 	unsigned long line_state;
-	struct klsi_105_port_settings cfg;
+	struct klsi_105_port_settings *cfg;
 	unsigned long flags;
 
 	dbg("%s port %d", __func__, port->number);
@@ -376,12 +387,18 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	 * Then read the modem line control and store values in
 	 * priv->line_state.
 	 */
-	cfg.pktlen   = 5;
-	cfg.baudrate = kl5kusb105a_sio_b9600;
-	cfg.databits = kl5kusb105a_dtb_8;
-	cfg.unknown1 = 0;
-	cfg.unknown2 = 1;
-	klsi_105_chg_port_settings(port, &cfg);
+	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
+	if (!cfg) {
+		dev_err(&port->dev, "%s - out of memory for config buffer.\n",
+				__func__);
+		return -ENOMEM;
+	}
+	cfg->pktlen   = 5;
+	cfg->baudrate = kl5kusb105a_sio_b9600;
+	cfg->databits = kl5kusb105a_dtb_8;
+	cfg->unknown1 = 0;
+	cfg->unknown2 = 1;
+	klsi_105_chg_port_settings(port, cfg);
 
 	/* set up termios structure */
 	spin_lock_irqsave(&priv->lock, flags);
@@ -391,11 +408,11 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	priv->termios.c_lflag = tty->termios->c_lflag;
 	for (i = 0; i < NCCS; i++)
 		priv->termios.c_cc[i] = tty->termios->c_cc[i];
-	priv->cfg.pktlen   = cfg.pktlen;
-	priv->cfg.baudrate = cfg.baudrate;
-	priv->cfg.databits = cfg.databits;
-	priv->cfg.unknown1 = cfg.unknown1;
-	priv->cfg.unknown2 = cfg.unknown2;
+	priv->cfg.pktlen   = cfg->pktlen;
+	priv->cfg.baudrate = cfg->baudrate;
+	priv->cfg.databits = cfg->databits;
+	priv->cfg.unknown1 = cfg->unknown1;
+	priv->cfg.unknown2 = cfg->unknown2;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* READ_ON and urb submission */
@@ -441,6 +458,7 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 		retval = rc;
 
 exit:
+	kfree(cfg);
 	return retval;
 } /* klsi_105_open */
 
@@ -681,7 +699,6 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
 			bytes_sent = urb->actual_length - 2;
 		}
 
-		tty_buffer_request_room(tty, bytes_sent);
 		tty_insert_flip_string(tty, data + 2, bytes_sent);
 		tty_flip_buffer_push(tty);
 		tty_kref_put(tty);
@@ -714,10 +731,17 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 	unsigned int old_iflag = old_termios->c_iflag;
 	unsigned int cflag = tty->termios->c_cflag;
 	unsigned int old_cflag = old_termios->c_cflag;
-	struct klsi_105_port_settings cfg;
+	struct klsi_105_port_settings *cfg;
 	unsigned long flags;
 	speed_t baud;
 
+	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
+	if (!cfg) {
+		dev_err(&port->dev, "%s - out of memory for config buffer.\n",
+				__func__);
+		return;
+	}
+
 	/* lock while we are modifying the settings */
 	spin_lock_irqsave(&priv->lock, flags);
 
@@ -793,11 +817,11 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 		case CS5:
 			dbg("%s - 5 bits/byte not supported", __func__);
 			spin_unlock_irqrestore(&priv->lock, flags);
-			return ;
+			goto err;
 		case CS6:
 			dbg("%s - 6 bits/byte not supported", __func__);
 			spin_unlock_irqrestore(&priv->lock, flags);
-			return ;
+			goto err;
 		case CS7:
 			priv->cfg.databits = kl5kusb105a_dtb_7;
 			break;
@@ -856,11 +880,13 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 #endif
 		;
 	}
-	memcpy(&cfg, &priv->cfg, sizeof(cfg));
+	memcpy(cfg, &priv->cfg, sizeof(*cfg));
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* now commit changes to device */
-	klsi_105_chg_port_settings(port, &cfg);
+	klsi_105_chg_port_settings(port, cfg);
+err:
+	kfree(cfg);
 } /* klsi_105_set_termios */
 
 
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 45ea694b3ae6..c113a2a0e10c 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -86,7 +86,7 @@ static void kobil_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static void kobil_init_termios(struct tty_struct *tty);
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) },
 	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_K_PRODUCT_ID) },
 	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_USBTWIN_PRODUCT_ID) },
@@ -388,7 +388,6 @@ static void kobil_read_int_callback(struct urb *urb)
 		*/
 		/* END DEBUG */
 
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
@@ -624,7 +623,6 @@ static void kobil_set_termios(struct tty_struct *tty,
 	unsigned short urb_val = 0;
 	int c_cflag = tty->termios->c_cflag;
 	speed_t speed;
-	void *settings;
 
 	priv = usb_get_serial_port_data(port);
 	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
@@ -647,25 +645,13 @@ static void kobil_set_termios(struct tty_struct *tty,
 	}
 	urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits :
 							SUSBCR_SPASB_1StopBit;
-
-	settings = kzalloc(50, GFP_KERNEL);
-	if (!settings)
-		return;
-
-	sprintf(settings, "%d ", speed);
-
 	if (c_cflag & PARENB) {
-		if  (c_cflag & PARODD) {
+		if  (c_cflag & PARODD)
 			urb_val |= SUSBCR_SPASB_OddParity;
-			strcat(settings, "Odd Parity");
-		} else {
+		else
 			urb_val |= SUSBCR_SPASB_EvenParity;
-			strcat(settings, "Even Parity");
-		}
-	} else {
+	} else
 		urb_val |= SUSBCR_SPASB_NoParity;
-		strcat(settings, "No Parity");
-	}
 	tty->termios->c_cflag &= ~CMSPAR;
 	tty_encode_baud_rate(tty, speed, speed);
 
@@ -675,11 +661,10 @@ static void kobil_set_termios(struct tty_struct *tty,
 		  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
 		  urb_val,
 		  0,
-		  settings,
+		  NULL,
 		  0,
 		  KOBIL_TIMEOUT
 		);
-	kfree(settings);
 }
 
 static int kobil_ioctl(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index cd009cb280a5..2849f8c32015 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -75,6 +75,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
+#include <asm/unaligned.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "mct_u232.h"
@@ -110,7 +111,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty);
 /*
  * All of the device info needed for the MCT USB-RS232 converter.
  */
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(MCT_U232_VID, MCT_U232_PID) },
 	{ USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) },
 	{ USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) },
@@ -231,19 +232,22 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
 static int mct_u232_set_baud_rate(struct tty_struct *tty,
 	struct usb_serial *serial, struct usb_serial_port *port, speed_t value)
 {
-	__le32 divisor;
+	unsigned int divisor;
 	int rc;
-	unsigned char zero_byte = 0;
+	unsigned char *buf;
 	unsigned char cts_enable_byte = 0;
 	speed_t speed;
 
-	divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value,
-								&speed));
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
 
+	divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
+	put_unaligned_le32(cpu_to_le32(divisor), buf);
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				MCT_U232_SET_BAUD_RATE_REQUEST,
 				MCT_U232_SET_REQUEST_TYPE,
-				0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE,
+				0, 0, buf, MCT_U232_SET_BAUD_RATE_SIZE,
 				WDR_TIMEOUT);
 	if (rc < 0)	/*FIXME: What value speed results */
 		dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n",
@@ -269,10 +273,11 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
 	   a device which is not asserting 'CTS'.
 	*/
 
+	buf[0] = 0;
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				MCT_U232_SET_UNKNOWN1_REQUEST,
 				MCT_U232_SET_REQUEST_TYPE,
-				0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE,
+				0, 0, buf, MCT_U232_SET_UNKNOWN1_SIZE,
 				WDR_TIMEOUT);
 	if (rc < 0)
 		dev_err(&port->dev, "Sending USB device request code %d "
@@ -284,30 +289,40 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
 
 	dbg("set_baud_rate: send second control message, data = %02X",
 							cts_enable_byte);
+	buf[0] = cts_enable_byte;
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			MCT_U232_SET_CTS_REQUEST,
 			MCT_U232_SET_REQUEST_TYPE,
-			0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE,
+			0, 0, buf, MCT_U232_SET_CTS_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0)
 		dev_err(&port->dev, "Sending USB device request code %d "
 			"failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc);
 
+	kfree(buf);
 	return rc;
 } /* mct_u232_set_baud_rate */
 
 static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr)
 {
 	int rc;
+	unsigned char *buf;
+
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	buf[0] = lcr;
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			MCT_U232_SET_LINE_CTRL_REQUEST,
 			MCT_U232_SET_REQUEST_TYPE,
-			0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE,
+			0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0)
 		dev_err(&serial->dev->dev,
 			"Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
 	dbg("set_line_ctrl: 0x%x", lcr);
+	kfree(buf);
 	return rc;
 } /* mct_u232_set_line_ctrl */
 
@@ -315,23 +330,31 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
 				   unsigned int control_state)
 {
 	int rc;
-	unsigned char mcr = MCT_U232_MCR_NONE;
+	unsigned char mcr;
+	unsigned char *buf;
+
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
 
+	mcr = MCT_U232_MCR_NONE;
 	if (control_state & TIOCM_DTR)
 		mcr |= MCT_U232_MCR_DTR;
 	if (control_state & TIOCM_RTS)
 		mcr |= MCT_U232_MCR_RTS;
 
+	buf[0] = mcr;
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			MCT_U232_SET_MODEM_CTRL_REQUEST,
 			MCT_U232_SET_REQUEST_TYPE,
-			0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE,
+			0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0)
 		dev_err(&serial->dev->dev,
 			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
 	dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
 
+	kfree(buf);
 	return rc;
 } /* mct_u232_set_modem_ctrl */
 
@@ -339,17 +362,27 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial,
 						unsigned char *msr)
 {
 	int rc;
+	unsigned char *buf;
+
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL) {
+		*msr = 0;
+		return -ENOMEM;
+	}
 	rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			MCT_U232_GET_MODEM_STAT_REQUEST,
 			MCT_U232_GET_REQUEST_TYPE,
-			0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE,
+			0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0) {
 		dev_err(&serial->dev->dev,
 			"Get MODEM STATus failed (error = %d)\n", rc);
 		*msr = 0;
+	} else {
+		*msr = buf[0];
 	}
 	dbg("get_modem_stat: 0x%x", *msr);
+	kfree(buf);
 	return rc;
 } /* mct_u232_get_modem_stat */
 
diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index 07b6bec31dc8..7417d5ce1e23 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -73,6 +73,8 @@
 #define MCT_U232_SET_CTS_REQUEST   12
 #define MCT_U232_SET_CTS_SIZE       1
 
+#define MCT_U232_MAX_SIZE		4	/* of MCT_XXX_SIZE */
+
 /*
  * Baud rate (divisor)
  * Actually, there are two of them, MCT website calls them "Philips solution"
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 763e32a44be0..0d47f2c4d59f 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -81,12 +81,15 @@ struct moschip_serial {
 
 static int debug;
 
+static struct usb_serial_driver moschip7720_2port_driver;
+
 #define USB_VENDOR_ID_MOSCHIP		0x9710
 #define MOSCHIP_DEVICE_ID_7720		0x7720
 #define MOSCHIP_DEVICE_ID_7715		0x7715
 
-static struct usb_device_id moschip_port_id_table[] = {
+static const struct usb_device_id moschip_port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
+	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7715) },
 	{ } /* terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, moschip_port_id_table);
@@ -106,7 +109,7 @@ static void mos7720_interrupt_callback(struct urb *urb)
 	__u8 sp1;
 	__u8 sp2;
 
-	dbg("%s", " : Entering\n");
+	dbg(" : Entering");
 
 	switch (status) {
 	case 0:
@@ -186,6 +189,75 @@ exit:
 }
 
 /*
+ * mos7715_interrupt_callback
+ *	this is the 7715's callback function for when we have received data on
+ *	the interrupt endpoint.
+ */
+static void mos7715_interrupt_callback(struct urb *urb)
+{
+	int result;
+	int length;
+	int status = urb->status;
+	__u8 *data;
+	__u8 iir;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __func__,
+		    status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __func__,
+		    status);
+		goto exit;
+	}
+
+	length = urb->actual_length;
+	data = urb->transfer_buffer;
+
+	/* Structure of data from 7715 device:
+	 * Byte 1: IIR serial Port
+	 * Byte 2: unused
+	 * Byte 2: DSR parallel port
+	 * Byte 4: FIFO status for both */
+
+	if (unlikely(length != 4)) {
+		dbg("Wrong data !!!");
+		return;
+	}
+
+	iir = data[0];
+	if (!(iir & 0x01)) {	/* serial port interrupt pending */
+		switch (iir & 0x0f) {
+		case SERIAL_IIR_RLS:
+			dbg("Serial Port: Receiver status error or address "
+			    "bit detected in 9-bit mode\n");
+			break;
+		case SERIAL_IIR_CTI:
+			dbg("Serial Port: Receiver time out");
+			break;
+		case SERIAL_IIR_MS:
+			dbg("Serial Port: Modem status change");
+			break;
+		}
+	}
+
+exit:
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&urb->dev->dev,
+			"%s - Error %d submitting control urb\n",
+			__func__, result);
+	return;
+}
+
+/*
  * mos7720_bulk_in_callback
  *	this is the callback function for when we have received data on the
  *	bulk in endpoint.
@@ -206,7 +278,7 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 
 	mos7720_port = urb->context;
 	if (!mos7720_port) {
-		dbg("%s", "NULL mos7720_port pointer \n");
+		dbg("NULL mos7720_port pointer");
 		return ;
 	}
 
@@ -218,7 +290,6 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
@@ -275,17 +346,15 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
  *	this function will be used for sending command to device
  */
 static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
-			__u16 index, void *data)
+			__u16 index, u8 *data)
 {
 	int status;
-	unsigned int pipe;
+	u8 *buf;
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
-	__u8 requesttype;
-	__u16 size = 0x0000;
 
 	if (value < MOS_MAX_PORT) {
 		if (product == MOSCHIP_DEVICE_ID_7715)
-			value = value*0x100+0x100;
+			value = 0x0200; /* identifies the 7715's serial port */
 		else
 			value = value*0x100+0x200;
 	} else {
@@ -298,27 +367,58 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
 	}
 
 	if (request == MOS_WRITE) {
-		request = (__u8)MOS_WRITE;
-		requesttype = (__u8)0x40;
-		value  = value + (__u16)*((unsigned char *)data);
-		data = NULL;
-		pipe = usb_sndctrlpipe(serial->dev, 0);
+		value = value + *data;
+		status = usb_control_msg(serial->dev,
+				usb_sndctrlpipe(serial->dev, 0), MOS_WRITE,
+				0x40, value, index, NULL, 0, MOS_WDR_TIMEOUT);
 	} else {
-		request = (__u8)MOS_READ;
-		requesttype = (__u8)0xC0;
-		size = 0x01;
-		pipe = usb_rcvctrlpipe(serial->dev, 0);
+		buf = kmalloc(1, GFP_KERNEL);
+		if (!buf) {
+			status = -ENOMEM;
+			goto out;
+		}
+		status = usb_control_msg(serial->dev,
+				usb_rcvctrlpipe(serial->dev, 0), MOS_READ,
+				0xc0, value, index, buf, 1, MOS_WDR_TIMEOUT);
+		*data = *buf;
+		kfree(buf);
 	}
-
-	status = usb_control_msg(serial->dev, pipe, request, requesttype,
-				 value, index, data, size, MOS_WDR_TIMEOUT);
-
+out:
 	if (status < 0)
-		dbg("Command Write failed Value %x index %x\n", value, index);
+		dbg("Command Write failed Value %x index %x", value, index);
 
 	return status;
 }
 
+
+/*
+ * mos77xx_probe
+ *	this function installs the appropriate read interrupt endpoint callback
+ *	depending on whether the device is a 7720 or 7715, thus avoiding costly
+ *	run-time checks in the high-frequency callback routine itself.
+ */
+static int mos77xx_probe(struct usb_serial *serial,
+			 const struct usb_device_id *id)
+{
+	if (id->idProduct == MOSCHIP_DEVICE_ID_7715)
+		moschip7720_2port_driver.read_int_callback =
+			mos7715_interrupt_callback;
+	else
+		moschip7720_2port_driver.read_int_callback =
+			mos7720_interrupt_callback;
+
+	return 0;
+}
+
+static int mos77xx_calc_num_ports(struct usb_serial *serial)
+{
+	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
+	if (product == MOSCHIP_DEVICE_ID_7715)
+		return 1;
+
+	return 2;
+}
+
 static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
@@ -390,7 +490,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 	  */
 	port_number = port->number - port->serial->minor;
 	send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data);
-	dbg("SS::%p LSR:%x\n", mos7720_port, data);
+	dbg("SS::%p LSR:%x", mos7720_port, data);
 
 	dbg("Check:Sending Command ..........");
 
@@ -729,7 +829,7 @@ static void mos7720_throttle(struct tty_struct *tty)
 	struct moschip_port *mos7720_port;
 	int status;
 
-	dbg("%s- port %d\n", __func__, port->number);
+	dbg("%s- port %d", __func__, port->number);
 
 	mos7720_port = usb_get_serial_port_data(port);
 
@@ -1208,7 +1308,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	dbg("%s\n", "setting termios - ASPIRE");
+	dbg("setting termios - ASPIRE");
 
 	cflag = tty->termios->c_cflag;
 
@@ -1226,7 +1326,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
 	change_port_settings(tty, mos7720_port, old_termios);
 
 	if (!port->read_urb) {
-		dbg("%s", "URB KILLED !!!!!\n");
+		dbg("URB KILLED !!!!!");
 		return;
 	}
 
@@ -1495,6 +1595,7 @@ static int mos7720_startup(struct usb_serial *serial)
 	struct usb_device *dev;
 	int i;
 	char data;
+	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
 
 	dbg("%s: Entering ..........", __func__);
 
@@ -1514,6 +1615,29 @@ static int mos7720_startup(struct usb_serial *serial)
 
 	usb_set_serial_data(serial, mos7720_serial);
 
+	/*
+	 * The 7715 uses the first bulk in/out endpoint pair for the parallel
+	 * port, and the second for the serial port.  Because the usbserial core
+	 * assumes both pairs are serial ports, we must engage in a bit of
+	 * subterfuge and swap the pointers for ports 0 and 1 in order to make
+	 * port 0 point to the serial port.  However, both moschip devices use a
+	 * single interrupt-in endpoint for both ports (as mentioned a little
+	 * further down), and this endpoint was assigned to port 0.  So after
+	 * the swap, we must copy the interrupt endpoint elements from port 1
+	 * (as newly assigned) to port 0, and null out port 1 pointers.
+	 */
+	if (product == MOSCHIP_DEVICE_ID_7715) {
+		struct usb_serial_port *tmp = serial->port[0];
+		serial->port[0] = serial->port[1];
+		serial->port[1] = tmp;
+		serial->port[0]->interrupt_in_urb = tmp->interrupt_in_urb;
+		serial->port[0]->interrupt_in_buffer = tmp->interrupt_in_buffer;
+		serial->port[0]->interrupt_in_endpointAddress =
+			tmp->interrupt_in_endpointAddress;
+		serial->port[1]->interrupt_in_urb = NULL;
+		serial->port[1]->interrupt_in_buffer = NULL;
+	}
+
 	/* we set up the pointers to the endpoints in the mos7720_open *
 	 * function, as the structures aren't created yet.             */
 
@@ -1529,7 +1653,7 @@ static int mos7720_startup(struct usb_serial *serial)
 
 		/* Initialize all port interrupt end point to port 0 int
 		 * endpoint.  Our device has only one interrupt endpoint
-		 * comman to all ports */
+		 * common to all ports */
 		serial->port[i]->interrupt_in_endpointAddress =
 				serial->port[0]->interrupt_in_endpointAddress;
 
@@ -1584,11 +1708,12 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.description		= "Moschip 2 port adapter",
 	.usb_driver		= &usb_driver,
 	.id_table		= moschip_port_id_table,
-	.num_ports		= 2,
+	.calc_num_ports		= mos77xx_calc_num_ports,
 	.open			= mos7720_open,
 	.close			= mos7720_close,
 	.throttle		= mos7720_throttle,
 	.unthrottle		= mos7720_unthrottle,
+	.probe			= mos77xx_probe,
 	.attach			= mos7720_startup,
 	.release		= mos7720_release,
 	.ioctl			= mos7720_ioctl,
@@ -1600,7 +1725,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.chars_in_buffer	= mos7720_chars_in_buffer,
 	.break_ctl		= mos7720_break,
 	.read_bulk_callback	= mos7720_bulk_in_callback,
-	.read_int_callback	= mos7720_interrupt_callback,
+	.read_int_callback	= NULL  /* dynamically assigned in probe() */
 };
 
 static int __init moschip7720_init(void)
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2cfe2451ed97..2fda1c0182b7 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -181,7 +181,7 @@
 #define URB_TRANSFER_BUFFER_SIZE        32	/* URB Size  */
 
 
-static struct usb_device_id moschip_port_id_table[] = {
+static const struct usb_device_id moschip_port_id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
@@ -198,7 +198,7 @@ static struct usb_device_id moschip_port_id_table[] = {
 	{}			/* terminating entry */
 };
 
-static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
+static const struct usb_device_id moschip_id_table_combined[] __devinitconst = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
@@ -283,12 +283,19 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
 {
 	struct usb_device *dev = port->serial->dev;
 	int ret = 0;
+	u8 *buf;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
 
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
-			      MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
+			      MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH,
 			      MOS_WDR_TIMEOUT);
+	*val = buf[0];
 	dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val);
-	*val = (*val) & 0x00ff;
+
+	kfree(buf);
 	return ret;
 }
 
@@ -341,6 +348,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
 	struct usb_device *dev = port->serial->dev;
 	int ret = 0;
 	__u16 Wval;
+	u8 *buf;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
 
 	/* dbg("application number is %4x",
 	    (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */
@@ -364,9 +376,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
 		}
 	}
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
-			      MCS_RD_RTYPE, Wval, reg, val, VENDOR_READ_LENGTH,
+			      MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
 			      MOS_WDR_TIMEOUT);
-	*val = (*val) & 0x00ff;
+	*val = buf[0];
+
+	kfree(buf);
 	return ret;
 }
 
@@ -750,7 +764,6 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 	if (urb->actual_length) {
 		tty = tty_port_tty_get(&mos7840_port->port->port);
 		if (tty) {
-			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			dbg(" %s ", data);
 			tty_flip_buffer_push(tty);
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index 99bd00f5188a..cf1718394e18 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -21,7 +21,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x05c6, 0x3197) },	/* unknown Motorola phone */
 	{ USB_DEVICE(0x0c44, 0x0022) },	/* unknown Mororola phone */
 	{ USB_DEVICE(0x22b8, 0x2a64) },	/* Motorola KRZR K1m */
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 5ceaa4c6be09..04a6cbbed2c0 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -22,7 +22,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0a99, 0x0001) },	/* Talon Technology device */
 	{ },
 };
@@ -66,7 +66,6 @@ static void navman_read_int_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 062265038bf0..89c724c0ac0a 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -75,7 +75,7 @@ static void omninet_disconnect(struct usb_serial *serial);
 static void omninet_release(struct usb_serial *serial);
 static int omninet_attach(struct usb_serial *serial);
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
 	{ }						/* Terminating entry */
@@ -218,8 +218,8 @@ static void omninet_read_bulk_callback(struct urb *urb)
 
 	if (debug && header->oh_xxx != 0x30) {
 		if (urb->actual_length) {
-			printk(KERN_DEBUG __FILE__
-					": omninet_read %d: ", header->oh_len);
+			printk(KERN_DEBUG "%s: omninet_read %d: ",
+			       __FILE__, header->oh_len);
 			for (i = 0; i < (header->oh_len +
 						OMNINET_HEADERLEN); i++)
 				printk("%.2x ", data[i]);
@@ -332,7 +332,7 @@ static void omninet_write_bulk_callback(struct urb *urb)
 	struct usb_serial_port 	*port   =  urb->context;
 	int status = urb->status;
 
-	dbg("%s - port %0x\n", __func__, port->number);
+	dbg("%s - port %0x", __func__, port->number);
 
 	port->write_urb_busy = 0;
 	if (status) {
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4cdb975caa89..f37476e22684 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -22,7 +22,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x065a, 0x0009) },
 	{ },
 };
@@ -55,7 +55,6 @@ static void opticon_bulk_callback(struct urb *urb)
 	int status = urb->status;
 	struct tty_struct *tty;
 	int result;
-	int available_room = 0;
 	int data_length;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -96,13 +95,9 @@ static void opticon_bulk_callback(struct urb *urb)
 			/* real data, send it to the tty layer */
 			tty = tty_port_tty_get(&port->port);
 			if (tty) {
-				available_room = tty_buffer_request_room(tty,
-								data_length);
-				if (available_room) {
-					tty_insert_flip_string(tty, data,
-							       available_room);
-					tty_flip_buffer_push(tty);
-				}
+				tty_insert_flip_string(tty, data,
+							       data_length);
+				tty_flip_buffer_push(tty);
 				tty_kref_put(tty);
 			}
 		} else {
@@ -217,7 +212,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
 		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dbg("%s - write limit hit", __func__);
 		return 0;
 	}
 	priv->outstanding_urbs++;
@@ -288,7 +283,7 @@ static int opticon_write_room(struct tty_struct *tty)
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
 		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dbg("%s - write limit hit", __func__);
 		return 0;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6e94a6711f08..847b805d63a3 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -336,15 +336,42 @@ static int  option_resume(struct usb_serial *serial);
 #define AIRPLUS_VENDOR_ID			0x1011
 #define AIRPLUS_PRODUCT_MCD650			0x3198
 
+/* Longcheer/Longsung vendor ID; makes whitelabel devices that
+ * many other vendors like 4G Systems, Alcatel, ChinaBird,
+ * Mobidata, etc sell under their own brand names.
+ */
+#define LONGCHEER_VENDOR_ID			0x1c9e
+
 /* 4G Systems products */
-#define FOUR_G_SYSTEMS_VENDOR_ID		0x1c9e
+/* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick *
+ * It seems to contain a Qualcomm QSC6240/6290 chipset            */
 #define FOUR_G_SYSTEMS_PRODUCT_W14		0x9603
 
 /* Haier products */
 #define HAIER_VENDOR_ID				0x201e
 #define HAIER_PRODUCT_CE100			0x2009
 
-static struct usb_device_id option_ids[] = {
+/* some devices interfaces need special handling due to a number of reasons */
+enum option_blacklist_reason {
+		OPTION_BLACKLIST_NONE = 0,
+		OPTION_BLACKLIST_SENDSETUP = 1,
+		OPTION_BLACKLIST_RESERVED_IF = 2
+};
+
+struct option_blacklist_info {
+	const u32 infolen;	/* number of interface numbers on blacklist */
+	const u8  *ifaceinfo;	/* pointer to the array holding the numbers */
+	enum option_blacklist_reason reason;
+};
+
+static const u8 four_g_w14_no_sendsetup[] = { 0, 1 };
+static const struct option_blacklist_info four_g_w14_blacklist = {
+	.infolen = ARRAY_SIZE(four_g_w14_no_sendsetup),
+	.ifaceinfo = four_g_w14_no_sendsetup,
+	.reason = OPTION_BLACKLIST_SENDSETUP
+};
+
+static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) },
@@ -644,7 +671,9 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
-	{ USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) },
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
+  	  .driver_info = (kernel_ulong_t)&four_g_w14_blacklist
+  	},
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
 	{ } /* Terminating entry */
 };
@@ -709,6 +738,7 @@ struct option_intf_private {
 	spinlock_t susp_lock;
 	unsigned int suspended:1;
 	int in_flight;
+	struct option_blacklist_info *blacklist_info;
 };
 
 struct option_port_private {
@@ -778,9 +808,27 @@ static int option_probe(struct usb_serial *serial,
 	if (!data)
 		return -ENOMEM;
 	spin_lock_init(&data->susp_lock);
+	data->blacklist_info = (struct option_blacklist_info*) id->driver_info;
 	return 0;
 }
 
+static enum option_blacklist_reason is_blacklisted(const u8 ifnum,
+				const struct option_blacklist_info *blacklist)
+{
+	const u8  *info;
+	int i;
+
+	if (blacklist) {
+		info = blacklist->ifaceinfo;
+
+		for (i = 0; i < blacklist->infolen; i++) {
+			if (info[i] == ifnum)
+				return blacklist->reason;
+		}
+	}
+	return OPTION_BLACKLIST_NONE;
+}
+
 static void option_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -921,7 +969,6 @@ static void option_indat_callback(struct urb *urb)
 	} else {
 		tty = tty_port_tty_get(&port->port);
 		if (urb->actual_length) {
-			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
 		} else 
@@ -929,9 +976,9 @@ static void option_indat_callback(struct urb *urb)
 		tty_kref_put(tty);
 
 		/* Resubmit urb so we continue receiving */
-		if (port->port.count && status != -ESHUTDOWN) {
+		if (status != -ESHUTDOWN) {
 			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err)
+			if (err && err != -EPERM)
 				printk(KERN_ERR "%s: resubmit read urb failed. "
 					"(%d)", __func__, err);
 			else
@@ -985,7 +1032,7 @@ static void option_instat_callback(struct urb *urb)
 				(struct usb_ctrlrequest *)urb->transfer_buffer;
 
 		if (!req_pkt) {
-			dbg("%s: NULL req_pkt\n", __func__);
+			dbg("%s: NULL req_pkt", __func__);
 			return;
 		}
 		if ((req_pkt->bRequestType == 0xA1) &&
@@ -1211,11 +1258,19 @@ static void option_setup_urbs(struct usb_serial *serial)
 static int option_send_setup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
+	struct option_intf_private *intfdata =
+		(struct option_intf_private *) serial->private;
 	struct option_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 	int val = 0;
 	dbg("%s", __func__);
 
+	if (is_blacklisted(ifNum, intfdata->blacklist_info) ==
+						OPTION_BLACKLIST_SENDSETUP) {
+		dbg("No send_setup on blacklisted interface #%d\n", ifNum);
+		return -EIO;
+	}
+
 	portdata = usb_get_serial_port_data(port);
 
 	if (portdata->dtr_state)
@@ -1401,7 +1456,7 @@ static int option_resume(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
 		if (!port->interrupt_in_urb) {
-			dbg("%s: No interrupt URB for port %d\n", __func__, i);
+			dbg("%s: No interrupt URB for port %d", __func__, i);
 			continue;
 		}
 		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index c644e26394b4..deeacdea05db 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -58,7 +58,7 @@
 #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
 #define OTI6858_VERSION "0.1"
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
 	{ }
 };
@@ -302,7 +302,7 @@ void send_data(struct work_struct *work)
 	struct usb_serial_port *port = priv->port;
 	int count = 0, result;
 	unsigned long flags;
-	unsigned char allow;
+	u8 *allow;
 
 	dbg("%s(port = %d)", __func__, port->number);
 
@@ -321,13 +321,20 @@ void send_data(struct work_struct *work)
 		count = port->bulk_out_size;
 
 	if (count != 0) {
+		allow = kmalloc(1, GFP_KERNEL);
+		if (!allow) {
+			dev_err(&port->dev, "%s(): kmalloc failed\n",
+					__func__);
+			return;
+		}
 		result = usb_control_msg(port->serial->dev,
 				usb_rcvctrlpipe(port->serial->dev, 0),
 				OTI6858_REQ_T_CHECK_TXBUFF,
 				OTI6858_REQ_CHECK_TXBUFF,
-				count, 0, &allow, 1, 100);
-		if (result != 1 || allow != 0)
+				count, 0, allow, 1, 100);
+		if (result != 1 || *allow != 0)
 			count = 0;
+		kfree(allow);
 	}
 
 	if (count == 0) {
@@ -578,9 +585,6 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
-	if (port->port.count != 1)
-		return 0;
-
 	buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
 	if (buf == NULL) {
 		dev_err(&port->dev, "%s(): out of memory!\n", __func__);
@@ -927,10 +931,6 @@ static void oti6858_read_bulk_callback(struct urb *urb)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (status != 0) {
-		if (!port->port.count) {
-			dbg("%s(): port is closed, exiting", __func__);
-			return;
-		}
 		/*
 		if (status == -EPROTO) {
 			* PL2303 mysteriously fails with -EPROTO reschedule
@@ -954,14 +954,12 @@ static void oti6858_read_bulk_callback(struct urb *urb)
 	}
 	tty_kref_put(tty);
 
-	/* schedule the interrupt urb if we are still open */
-	if (port->port.count != 0) {
-		port->interrupt_in_urb->dev = port->serial->dev;
-		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
-		if (result != 0) {
-			dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
-					" error %d\n", __func__, result);
-		}
+	/* schedule the interrupt urb */
+	port->interrupt_in_urb->dev = port->serial->dev;
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+	if (result != 0 && result != -EPERM) {
+		dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
+				" error %d\n", __func__, result);
 	}
 }
 
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 9ec1a49e2362..73d5f346d3e0 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -50,7 +50,7 @@ struct pl2303_buf {
 	char		*buf_put;
 };
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
@@ -451,7 +451,6 @@ static void pl2303_send(struct usb_serial_port *port)
 			      port->write_urb->transfer_buffer);
 
 	port->write_urb->transfer_buffer_length = count;
-	port->write_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting write urb,"
@@ -769,7 +768,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
 	dbg("%s - submitting read urb", __func__);
-	port->read_urb->dev = serial->dev;
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
@@ -779,7 +777,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 	}
 
 	dbg("%s - submitting interrupt urb", __func__);
-	port->interrupt_in_urb->dev = serial->dev;
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
@@ -895,10 +892,23 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg)
 {
+	struct serial_struct ser;
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
 
 	switch (cmd) {
+	case TIOCGSERIAL:
+		memset(&ser, 0, sizeof ser);
+		ser.type = PORT_16654;
+		ser.line = port->serial->minor;
+		ser.port = port->number;
+		ser.baud_base = 460800;
+
+		if (copy_to_user((void __user *)arg, &ser, sizeof ser))
+			return -EFAULT;
+
+		return 0;
+
 	case TIOCMIWAIT:
 		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
 		return wait_modem_info(port, arg);
@@ -1042,7 +1052,6 @@ static void pl2303_push_data(struct tty_struct *tty,
 		tty_flag = TTY_FRAME;
 	dbg("%s - tty_flag = %d", __func__, tty_flag);
 
-	tty_buffer_request_room(tty, urb->actual_length + 1);
 	/* overrun is special, not associated with a char */
 	if (line_status & UART_OVERRUN_ERROR)
 		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
@@ -1072,16 +1081,11 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 
 	if (status) {
 		dbg("%s - urb status = %d", __func__, status);
-		if (!port->port.count) {
-			dbg("%s - port is closed, exiting.", __func__);
-			return;
-		}
 		if (status == -EPROTO) {
 			/* PL2303 mysteriously fails with -EPROTO reschedule
 			 * the read */
 			dbg("%s - caught -EPROTO, resubmitting the urb",
 			    __func__);
-			urb->dev = port->serial->dev;
 			result = usb_submit_urb(urb, GFP_ATOMIC);
 			if (result)
 				dev_err(&urb->dev->dev, "%s - failed"
@@ -1108,15 +1112,10 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 	}
 	tty_kref_put(tty);
 	/* Schedule the next read _if_ we are still open */
-	if (port->port.count) {
-		urb->dev = port->serial->dev;
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&urb->dev->dev, "%s - failed resubmitting"
-				" read urb, error %d\n", __func__, result);
-	}
-
-	return;
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result && result != -EPERM)
+		dev_err(&urb->dev->dev, "%s - failed resubmitting"
+			" read urb, error %d\n", __func__, result);
 }
 
 static void pl2303_write_bulk_callback(struct urb *urb)
@@ -1146,7 +1145,6 @@ static void pl2303_write_bulk_callback(struct urb *urb)
 		dbg("%s - nonzero write bulk status received: %d", __func__,
 		    status);
 		port->write_urb->transfer_buffer_length = 1;
-		port->write_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result)
 			dev_err(&urb->dev->dev, "%s - failed resubmitting write"
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
new file mode 100644
index 000000000000..0b9362061713
--- /dev/null
+++ b/drivers/usb/serial/qcaux.c
@@ -0,0 +1,96 @@
+/*
+ * Qualcomm USB Auxiliary Serial Port driver
+ *
+ * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2010 Dan Williams <dcbw@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ * Devices listed here usually provide a CDC ACM port on which normal modem
+ * AT commands and PPP can be used.  But when that port is in-use by PPP it
+ * cannot be used simultaneously for status or signal strength.  Instead, the
+ * ports here can be queried for that information using the Qualcomm DM
+ * protocol.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+/* NOTE: for now, only use this driver for devices that provide a CDC-ACM port
+ * for normal AT commands, but also provide secondary USB interfaces for the
+ * QCDM-capable ports.  Devices that do not provide a CDC-ACM port should
+ * probably be driven by option.ko.
+ */
+
+/* UTStarcom/Pantech/Curitel devices */
+#define UTSTARCOM_VENDOR_ID			0x106c
+#define UTSTARCOM_PRODUCT_PC5740		0x3701
+#define UTSTARCOM_PRODUCT_PC5750		0x3702 /* aka Pantech PX-500 */
+#define UTSTARCOM_PRODUCT_UM150			0x3711
+#define UTSTARCOM_PRODUCT_UM175_V1		0x3712
+#define UTSTARCOM_PRODUCT_UM175_V2		0x3714
+#define UTSTARCOM_PRODUCT_UM175_ALLTEL		0x3715
+
+/* CMOTECH devices */
+#define CMOTECH_VENDOR_ID			0x16d8
+#define CMOTECH_PRODUCT_CDU550			0x5553
+#define CMOTECH_PRODUCT_CDX650			0x6512
+
+static struct usb_device_id id_table[] = {
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM150, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V1, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V2, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver qcaux_driver = {
+	.name =		"qcaux",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.no_dynamic_id = 	1,
+};
+
+static struct usb_serial_driver qcaux_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"qcaux",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+};
+
+static int __init qcaux_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&qcaux_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&qcaux_driver);
+	if (retval)
+		usb_serial_deregister(&qcaux_device);
+	return retval;
+}
+
+static void __exit qcaux_exit(void)
+{
+	usb_deregister(&qcaux_driver);
+	usb_serial_deregister(&qcaux_device);
+}
+
+module_init(qcaux_init);
+module_exit(qcaux_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 7528b8d57f1c..310ff6ec6567 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -21,7 +21,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
 	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c
index 951ea0c6ba77..cb8195cabfde 100644
--- a/drivers/usb/serial/siemens_mpi.c
+++ b/drivers/usb/serial/siemens_mpi.c
@@ -22,7 +22,7 @@
 #define DRIVER_DESC "Driver for Siemens USB/MPI adapter"
 
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	/* Vendor and product id for 6ES7-972-0CB20-0XA0 */
 	{ USB_DEVICE(0x908, 0x0004) },
 	{ },
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 3eb6143bb646..34e6f894cba9 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -226,7 +226,7 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = {
 	.ifaceinfo = direct_ip_non_serial_ifaces,
 };
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 	{ USB_DEVICE(0x03F0, 0x1B1D) },	/* HP ev2200 a.k.a MC5720 */
 	{ USB_DEVICE(0x03F0, 0x1E1D) },	/* HP hs2300 a.k.a MC8775 */
@@ -304,16 +304,6 @@ static struct usb_device_id id_table [] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver sierra_driver = {
-	.name       = "sierra",
-	.probe      = usb_serial_probe,
-	.disconnect = usb_serial_disconnect,
-	.suspend    = usb_serial_suspend,
-	.resume     = usb_serial_resume,
-	.id_table   = id_table,
-	.no_dynamic_id = 	1,
-	.supports_autosuspend =	1,
-};
 
 struct sierra_port_private {
 	spinlock_t lock;	/* lock the structure */
@@ -477,7 +467,7 @@ static void sierra_outdat_callback(struct urb *urb)
 static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count)
 {
-	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+	struct sierra_port_private *portdata;
 	struct sierra_intf_private *intfdata;
 	struct usb_serial *serial = port->serial;
 	unsigned long flags;
@@ -604,14 +594,15 @@ static void sierra_indat_callback(struct urb *urb)
 	} else {
 		if (urb->actual_length) {
 			tty = tty_port_tty_get(&port->port);
-
-			tty_buffer_request_room(tty, urb->actual_length);
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-
-			tty_kref_put(tty);
-			usb_serial_debug_data(debug, &port->dev, __func__,
-				urb->actual_length, data);
+			if (tty) {
+				tty_insert_flip_string(tty, data,
+					urb->actual_length);
+				tty_flip_buffer_push(tty);
+
+				tty_kref_put(tty);
+				usb_serial_debug_data(debug, &port->dev,
+					__func__, urb->actual_length, data);
+			}
 		} else {
 			dev_dbg(&port->dev, "%s: empty read urb"
 				" received\n", __func__);
@@ -619,10 +610,10 @@ static void sierra_indat_callback(struct urb *urb)
 	}
 
 	/* Resubmit urb so we continue receiving */
-	if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
+	if (status != -ESHUTDOWN && status != -EPERM) {
 		usb_mark_last_busy(port->serial->dev);
 		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err)
+		if (err && err != -EPERM)
 			dev_err(&port->dev, "resubmit read urb failed."
 				"(%d)\n", err);
 	}
@@ -681,11 +672,11 @@ static void sierra_instat_callback(struct urb *urb)
 		dev_dbg(&port->dev, "%s: error %d\n", __func__, status);
 
 	/* Resubmit urb so we continue receiving IRQ data */
-	if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) {
+	if (status != -ESHUTDOWN && status != -ENOENT) {
 		usb_mark_last_busy(serial->dev);
 		urb->dev = serial->dev;
 		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err)
+		if (err && err != -EPERM)
 			dev_err(&port->dev, "%s: resubmit intr urb "
 				"failed. (%d)\n", __func__, err);
 	}
@@ -1061,11 +1052,31 @@ static int sierra_resume(struct usb_serial *serial)
 
 	return ec ? -EIO : 0;
 }
+
+static int sierra_reset_resume(struct usb_interface *intf)
+{
+	struct usb_serial *serial = usb_get_intfdata(intf);
+	dev_err(&serial->dev->dev, "%s\n", __func__);
+	return usb_serial_resume(intf);
+}
 #else
 #define sierra_suspend NULL
 #define sierra_resume NULL
+#define sierra_reset_resume NULL
 #endif
 
+static struct usb_driver sierra_driver = {
+	.name       = "sierra",
+	.probe      = usb_serial_probe,
+	.disconnect = usb_serial_disconnect,
+	.suspend    = usb_serial_suspend,
+	.resume     = usb_serial_resume,
+	.reset_resume = sierra_reset_resume,
+	.id_table   = id_table,
+	.no_dynamic_id = 	1,
+	.supports_autosuspend =	1,
+};
+
 static struct usb_serial_driver sierra_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 1e58220403d1..5d39191e7244 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -45,7 +45,7 @@ static int debug;
 #define SPCP8x5_835_VID		0x04fc
 #define SPCP8x5_835_PID		0x0231
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
 	{ USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
 	{ USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
@@ -609,7 +609,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	if (i < 0)
 		dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
 			uartdata, i);
-	dbg("0x21:0x40:0:0  %d\n", i);
+	dbg("0x21:0x40:0:0  %d", i);
 
 	if (cflag & CRTSCTS) {
 		/* enable hardware flow control */
@@ -677,7 +677,6 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned long flags;
-	int i;
 	int result = urb->status;
 	u8 status;
 	char tty_flag;
@@ -687,8 +686,6 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 
 	/* check the urb status */
 	if (result) {
-		if (!port->port.count)
-			return;
 		if (result == -EPROTO) {
 			/* spcp8x5 mysteriously fails with -EPROTO */
 			/* reschedule the read */
@@ -726,26 +723,20 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
 		if (status & UART_OVERRUN_ERROR)
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		for (i = 0; i < urb->actual_length; ++i)
-			tty_insert_flip_char(tty, data[i], tty_flag);
+		tty_insert_flip_string_fixed_flag(tty, data,
+						urb->actual_length, tty_flag);
 		tty_flip_buffer_push(tty);
 	}
 	tty_kref_put(tty);
 
-	/* Schedule the next read _if_ we are still open */
-	if (port->port.count) {
-		urb->dev = port->serial->dev;
-		result = usb_submit_urb(urb , GFP_ATOMIC);
-		if (result)
-			dev_dbg(&port->dev, "failed submitting read urb %d\n",
-				result);
-	}
-
-	return;
+	/* Schedule the next read */
+	urb->dev = port->serial->dev;
+	result = usb_submit_urb(urb , GFP_ATOMIC);
+	if (result)
+		dev_dbg(&port->dev, "failed submitting read urb %d\n", result);
 }
 
 /* get data from ring buffer and then write to usb bus */
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index b282c0f2d8e5..72398888858f 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -21,7 +21,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x05e0, 0x0600) },
 	{ },
 };
@@ -51,7 +51,6 @@ static void symbol_int_callback(struct urb *urb)
 	int status = urb->status;
 	struct tty_struct *tty;
 	int result;
-	int available_room = 0;
 	int data_length;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -89,13 +88,8 @@ static void symbol_int_callback(struct urb *urb)
 		 */
 		tty = tty_port_tty_get(&port->port);
 		if (tty) {
-			available_room = tty_buffer_request_room(tty,
-							data_length);
-			if (available_room) {
-				tty_insert_flip_string(tty, &data[1],
-						       available_room);
-				tty_flip_buffer_push(tty);
-			}
+			tty_insert_flip_string(tty, &data[1], data_length);
+			tty_flip_buffer_push(tty);
 			tty_kref_put(tty);
 		}
 	} else {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 1e9dc8821698..0afe5c71c17e 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1271,14 +1271,13 @@ static void ti_recv(struct device *dev, struct tty_struct *tty,
 	int cnt;
 
 	do {
-		cnt = tty_buffer_request_room(tty, length);
+		cnt = tty_insert_flip_string(tty, data, length);
 		if (cnt < length) {
 			dev_err(dev, "%s - dropping data, %d bytes lost\n",
 						__func__, length - cnt);
 			if (cnt == 0)
 				break;
 		}
-		tty_insert_flip_string(tty, data, cnt);
 		tty_flip_buffer_push(tty);
 		data += cnt;
 		length -= cnt;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 33c85f7084f8..3873660d8217 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -358,10 +358,6 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf,
 
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
-	/* count is managed under the mutex lock for the tty so cannot
-	   drop to zero until after the last close completes */
-	WARN_ON(!port->port.count);
-
 	/* pass on to the driver specific version of this function */
 	retval = port->serial->type->write(tty, port, buf, count);
 
@@ -373,7 +369,6 @@ static int serial_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
-	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
 	return port->serial->type->write_room(tty);
 }
@@ -381,7 +376,7 @@ static int serial_write_room(struct tty_struct *tty)
 static int serial_chars_in_buffer(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s = port %d", __func__, port->number);
+	dbg("%s - port %d", __func__, port->number);
 
 	/* if the device was unplugged then any remaining characters
 	   fell out of the connector ;) */
@@ -396,7 +391,6 @@ static void serial_throttle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
 	if (port->serial->type->throttle)
 		port->serial->type->throttle(tty);
@@ -407,7 +401,6 @@ static void serial_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
 	if (port->serial->type->unthrottle)
 		port->serial->type->unthrottle(tty);
@@ -421,8 +414,6 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file,
 
 	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 
-	WARN_ON(!port->port.count);
-
 	/* pass on to the driver specific version of this function
 	   if it is available */
 	if (port->serial->type->ioctl) {
@@ -437,7 +428,6 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function
 	   if it is available */
 	if (port->serial->type->set_termios)
@@ -452,7 +442,6 @@ static int serial_break(struct tty_struct *tty, int break_state)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function
 	   if it is available */
 	if (port->serial->type->break_ctl)
@@ -513,7 +502,6 @@ static int serial_tiocmget(struct tty_struct *tty, struct file *file)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	if (port->serial->type->tiocmget)
 		return port->serial->type->tiocmget(tty, file);
 	return -EINVAL;
@@ -526,7 +514,6 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	if (port->serial->type->tiocmset)
 		return port->serial->type->tiocmset(tty, file, set, clear);
 	return -EINVAL;
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 7b5bfc4edd3d..252cc2d993b2 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -29,7 +29,7 @@ static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = {
 	0xff,
 };
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0525, 0x127a) },
 	{ },
 };
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index ad1f9232292d..094942707c7d 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -368,7 +368,7 @@ static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
 		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dbg("%s - write limit hit", __func__);
 		return 0;
 	}
 	priv->outstanding_urbs++;
@@ -446,7 +446,7 @@ static int visor_write_room(struct tty_struct *tty)
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
 		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dbg("%s - write limit hit", __func__);
 		return 0;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -503,13 +503,9 @@ static void visor_read_bulk_callback(struct urb *urb)
 	if (urb->actual_length) {
 		tty = tty_port_tty_get(&port->port);
 		if (tty) {
-			available_room = tty_buffer_request_room(tty,
-							urb->actual_length);
-			if (available_room) {
-				tty_insert_flip_string(tty, data,
-							available_room);
-				tty_flip_buffer_push(tty);
-			}
+			tty_insert_flip_string(tty, data,
+						urb->actual_length);
+			tty_flip_buffer_push(tty);
 			tty_kref_put(tty);
 		}
 		spin_lock(&priv->lock);
@@ -807,10 +803,14 @@ static int clie_3_5_startup(struct usb_serial *serial)
 {
 	struct device *dev = &serial->dev->dev;
 	int result;
-	u8 data;
+	u8 *data;
 
 	dbg("%s", __func__);
 
+	data = kmalloc(1, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	/*
 	 * Note that PEG-300 series devices expect the following two calls.
 	 */
@@ -818,36 +818,42 @@ static int clie_3_5_startup(struct usb_serial *serial)
 	/* get the config number */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				  USB_REQ_GET_CONFIGURATION, USB_DIR_IN,
-				  0, 0, &data, 1, 3000);
+				  0, 0, data, 1, 3000);
 	if (result < 0) {
 		dev_err(dev, "%s: get config number failed: %d\n",
 							__func__, result);
-		return result;
+		goto out;
 	}
 	if (result != 1) {
 		dev_err(dev, "%s: get config number bad return length: %d\n",
 							__func__, result);
-		return -EIO;
+		result = -EIO;
+		goto out;
 	}
 
 	/* get the interface number */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				  USB_REQ_GET_INTERFACE,
 				  USB_DIR_IN | USB_RECIP_INTERFACE,
-				  0, 0, &data, 1, 3000);
+				  0, 0, data, 1, 3000);
 	if (result < 0) {
 		dev_err(dev, "%s: get interface number failed: %d\n",
 							__func__, result);
-		return result;
+		goto out;
 	}
 	if (result != 1) {
 		dev_err(dev,
 			"%s: get interface number bad return length: %d\n",
 							__func__, result);
-		return -EIO;
+		result = -EIO;
+		goto out;
 	}
 
-	return generic_startup(serial);
+	result = generic_startup(serial);
+out:
+	kfree(data);
+
+	return result;
 }
 
 static int treo_attach(struct usb_serial *serial)
diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c
new file mode 100644
index 000000000000..f719d00972fc
--- /dev/null
+++ b/drivers/usb/serial/vivopay-serial.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2001-2005 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2009 Outpost Embedded, LLC
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+
+#define DRIVER_VERSION "v1.0"
+#define DRIVER_DESC "ViVOpay USB Serial Driver"
+
+#define VIVOPAY_VENDOR_ID 0x1d5f
+
+
+static struct usb_device_id id_table [] = {
+	/* ViVOpay 8800 */
+	{ USB_DEVICE(VIVOPAY_VENDOR_ID, 0x1004) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver vivopay_serial_driver = {
+	.name =			"vivopay-serial",
+	.probe =		usb_serial_probe,
+	.disconnect =		usb_serial_disconnect,
+	.id_table =		id_table,
+	.no_dynamic_id =	1,
+};
+
+static struct usb_serial_driver vivopay_serial_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"vivopay-serial",
+	},
+	.id_table =		id_table,
+	.usb_driver =		&vivopay_serial_driver,
+	.num_ports =		1,
+};
+
+static int __init vivopay_serial_init(void)
+{
+	int retval;
+	retval = usb_serial_register(&vivopay_serial_device);
+	if (retval)
+		goto failed_usb_serial_register;
+	retval = usb_register(&vivopay_serial_driver);
+	if (retval)
+		goto failed_usb_register;
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	    DRIVER_DESC "\n");
+	return 0;
+failed_usb_register:
+	usb_serial_deregister(&vivopay_serial_device);
+failed_usb_serial_register:
+	return retval;
+}
+
+static void __exit vivopay_serial_exit(void)
+{
+	usb_deregister(&vivopay_serial_driver);
+	usb_serial_deregister(&vivopay_serial_device);
+}
+
+module_init(vivopay_serial_init);
+module_exit(vivopay_serial_exit);
+
+MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 1093d2eb046a..12ed8209ca72 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -111,17 +111,17 @@ static int debug;
    separate ID tables, and then a third table that combines them
    just for the purpose of exporting the autoloading information.
 */
-static struct usb_device_id id_table_std [] = {
+static const struct usb_device_id id_table_std[] = {
 	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_prerenumeration [] = {
+static const struct usb_device_id id_table_prerenumeration[] = {
 	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 	{ }						/* Terminating entry */
@@ -1492,21 +1492,9 @@ static void rx_data_softint(struct work_struct *work)
 		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 		urb = wrap->urb;
 
-		if (tty && urb->actual_length) {
-			int len = tty_buffer_request_room(tty,
-							urb->actual_length);
-			/* This stuff can go away now I suspect */
-			if (unlikely(len < urb->actual_length)) {
-				spin_lock_irqsave(&info->lock, flags);
-				list_add(tmp, &info->rx_urb_q);
-				spin_unlock_irqrestore(&info->lock, flags);
-				tty_flip_buffer_push(tty);
-				schedule_work(&info->rx_work);
-				goto out;
-			}
-			tty_insert_flip_string(tty, urb->transfer_buffer, len);
-			sent += len;
-		}
+		if (tty && urb->actual_length)
+			sent += tty_insert_flip_string(tty,
+				urb->transfer_buffer, urb->actual_length);
 
 		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 80e65f29921c..198bb3ed95b2 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -202,7 +202,7 @@ static int onetouch_connect_input(struct us_data *ss)
 		goto fail1;
 
 	onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN,
-					  GFP_ATOMIC, &onetouch->data_dma);
+					  GFP_KERNEL, &onetouch->data_dma);
 	if (!onetouch->data)
 		goto fail1;
 
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index aadc16b5eed7..4cc035562cc2 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -133,7 +133,7 @@ static int slave_configure(struct scsi_device *sdev)
 
 		if (us->fflags & US_FL_MAX_SECTORS_MIN)
 			max_sectors = PAGE_CACHE_SIZE >> 9;
-		if (queue_max_sectors(sdev->request_queue) > max_sectors)
+		if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
 			blk_queue_max_hw_sectors(sdev->request_queue,
 					      max_sectors);
 	} else if (sdev->type == TYPE_TAPE) {
@@ -484,7 +484,7 @@ static ssize_t show_max_sectors(struct device *dev, struct device_attribute *att
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
 
-	return sprintf(buf, "%u\n", queue_max_sectors(sdev->request_queue));
+	return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue));
 }
 
 /* Input routine for the sysfs max_sectors file */
@@ -494,9 +494,9 @@ static ssize_t store_max_sectors(struct device *dev, struct device_attribute *at
 	struct scsi_device *sdev = to_scsi_device(dev);
 	unsigned short ms;
 
-	if (sscanf(buf, "%hu", &ms) > 0 && ms <= SCSI_DEFAULT_MAX_SECTORS) {
+	if (sscanf(buf, "%hu", &ms) > 0) {
 		blk_queue_max_hw_sectors(sdev->request_queue, ms);
-		return strlen(buf);
+		return count;
 	}
 	return -EINVAL;	
 }
@@ -539,7 +539,7 @@ struct scsi_host_template usb_stor_host_template = {
 	.slave_configure =		slave_configure,
 
 	/* lots of sg segments can be handled */
-	.sg_tablesize =			SG_ALL,
+	.sg_tablesize =			SCSI_MAX_SG_CHAIN_SEGMENTS,
 
 	/* limit the total size of a transfer to 120 KB */
 	.max_sectors =                  240,
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index b62a28814ebe..bd3f415893d8 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1628,10 +1628,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	if ( (result = usbat_multiple_write(us, 
-			registers, data, 7)) != USB_STOR_TRANSPORT_GOOD) {
+	result = usbat_multiple_write(us, registers, data, 7);
+
+	if (result != USB_STOR_TRANSPORT_GOOD)
 		return result;
-	}
 
 	/*
 	 * Write the 12-byte command header.
@@ -1643,12 +1643,11 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
 	 * AT SPEED 4 IS UNRELIABLE!!!
 	 */
 
-	if ((result = usbat_write_block(us,
-			USBAT_ATA, srb->cmnd, 12,
-				(srb->cmnd[0]==GPCMD_BLANK ? 75 : 10), 0) !=
-			     USB_STOR_TRANSPORT_GOOD)) {
+	result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12,
+				   srb->cmnd[0] == GPCMD_BLANK ? 75 : 10, 0);
+
+	if (result != USB_STOR_TRANSPORT_GOOD)
 		return result;
-	}
 
 	/* If there is response data to be read in then do it here. */
 
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index cc313d16d727..468038126e5e 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -47,6 +47,8 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 
+#include <linux/usb/quirks.h>
+
 #include <scsi/scsi.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_device.h>
@@ -1297,6 +1299,10 @@ int usb_stor_port_reset(struct us_data *us)
 {
 	int result;
 
+	/*for these devices we must use the class specific method */
+	if (us->pusb_dev->quirks & USB_QUIRK_RESET_MORPHS)
+		return -EPERM;
+
 	result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
 	if (result < 0)
 		US_DEBUGP("unable to lock device for reset: %d\n", result);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 49575fba3756..98b549b1cab2 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1147,8 +1147,8 @@ UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
 		0 ),
 
 /* Reported by Jan Dumon <j.dumon@option.com>
- * This device (wrongly) has a vendor-specific device descriptor.
- * The entry is needed so usb-storage can bind to it's mass-storage
+ * These devices (wrongly) have a vendor-specific device descriptor.
+ * These entries are needed so usb-storage can bind to their mass-storage
  * interface as an interface driver */
 UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
 		"Option",
@@ -1156,6 +1156,90 @@ UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		0 ),
 
+UNUSUAL_DEV( 0x0af0, 0x7701, 0x0000, 0x0000,
+		"Option",
+		"GI 0451 SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7706, 0x0000, 0x0000,
+		"Option",
+		"GI 0451 SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7901, 0x0000, 0x0000,
+		"Option",
+		"GI 0452 SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7A01, 0x0000, 0x0000,
+		"Option",
+		"GI 0461 SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7A05, 0x0000, 0x0000,
+		"Option",
+		"GI 0461 SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8300, 0x0000, 0x0000,
+		"Option",
+		"GI 033x SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8302, 0x0000, 0x0000,
+		"Option",
+		"GI 033x SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0000,
+		"Option",
+		"GI 033x SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000,
+		"Option",
+		"GI 070x SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd057, 0x0000, 0x0000,
+		"Option",
+		"GI 1505 SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd058, 0x0000, 0x0000,
+		"Option",
+		"GI 1509 SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd157, 0x0000, 0x0000,
+		"Option",
+		"GI 1515 SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd257, 0x0000, 0x0000,
+		"Option",
+		"GI 1215 SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd357, 0x0000, 0x0000,
+		"Option",
+		"GI 1505 SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
 /* Reported by Ben Efros <ben@pc-doctor.com> */
 UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
 		"Seagate",
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index b1e579c5c97c..61522787f39c 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -28,7 +28,7 @@
 #define USB_SKEL_PRODUCT_ID	0xfff0
 
 /* table of devices that work with this driver */
-static struct usb_device_id skel_table[] = {
+static const struct usb_device_id skel_table[] = {
 	{ USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c
index 25eae405f622..51a8e0d5789d 100644
--- a/drivers/usb/wusbcore/cbaf.c
+++ b/drivers/usb/wusbcore/cbaf.c
@@ -641,7 +641,7 @@ static void cbaf_disconnect(struct usb_interface *iface)
 	kzfree(cbaf);
 }
 
-static struct usb_device_id cbaf_id_table[] = {
+static const struct usb_device_id cbaf_id_table[] = {
 	{ USB_INTERFACE_INFO(0xef, 0x03, 0x01), },
 	{ },
 };
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index dced419f7aba..1c918286159c 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -868,7 +868,7 @@ static struct usb_wireless_cap_descriptor wusb_cap_descr_default = {
  * reference that we'll drop.
  *
  * First we need to determine if the device is a WUSB device (else we
- * ignore it). For that we use the speed setting (USB_SPEED_VARIABLE)
+ * ignore it). For that we use the speed setting (USB_SPEED_WIRELESS)
  * [FIXME: maybe we'd need something more definitive]. If so, we track
  * it's usb_busd and from there, the WUSB HC.
  *
diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c
index 3b52161e6e9c..2d827397e30b 100644
--- a/drivers/usb/wusbcore/mmc.c
+++ b/drivers/usb/wusbcore/mmc.c
@@ -263,7 +263,7 @@ int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid)
 {
 	int result = 0;
 
-	if (memcmp(chid, &wusb_ckhdid_zero, sizeof(chid)) == 0)
+	if (memcmp(chid, &wusb_ckhdid_zero, sizeof(*chid)) == 0)
 		chid = NULL;
 
 	mutex_lock(&wusbhc->mutex);