Merge tag 'bypass' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into for-3.7

regulator: Bypass mode support

Allow regulators to be put into a non-regulating mode bypassing the
input straight to the output, mostly used by low power retention modes.

5 files changed, 148 insertions, 0 deletions

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 427a289f32a5..6c19833ed2d0 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -434,6 +434,11 @@ static int __devinit arizona_extcon_probe(struct platform_device *pdev)
 	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
 			   ARIZONA_JD1_ENA, ARIZONA_JD1_ENA);
 
+	ret = regulator_allow_bypass(info->micvdd, true);
+	if (ret != 0)
+		dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n",
+			 ret);
+
 	pm_runtime_put(&pdev->dev);
 
 	return 0;
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index c8f95c07adb6..80e012f14160 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -39,6 +39,8 @@ static struct regulator_ops arizona_ldo1_ops = {
 	.map_voltage = regulator_map_voltage_linear,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
 };
 
 static const struct regulator_desc arizona_ldo1 = {
@@ -49,6 +51,8 @@ static const struct regulator_desc arizona_ldo1 = {
 
 	.vsel_reg = ARIZONA_LDO1_CONTROL_1,
 	.vsel_mask = ARIZONA_LDO1_VSEL_MASK,
+	.bypass_reg = ARIZONA_LDO1_CONTROL_1,
+	.bypass_mask = ARIZONA_LDO1_BYPASS,
 	.min_uV = 900000,
 	.uV_step = 50000,
 	.n_voltages = 7,
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index 450a069aa9b6..d9b1f82cc5bd 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -82,6 +82,9 @@ static struct regulator_ops arizona_micsupp_ops = {
 
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
 };
 
 static const struct regulator_desc arizona_micsupp = {
@@ -95,6 +98,8 @@ static const struct regulator_desc arizona_micsupp = {
 	.vsel_mask = ARIZONA_LDO2_VSEL_MASK,
 	.enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
 	.enable_mask = ARIZONA_CPMIC_ENA,
+	.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+	.bypass_mask = ARIZONA_CPMIC_BYPASS,
 
 	.owner = THIS_MODULE,
 };
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 48385318175a..419805cdd9d7 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -77,6 +77,7 @@ struct regulator {
 	struct device *dev;
 	struct list_head list;
 	unsigned int always_on:1;
+	unsigned int bypass:1;
 	int uA_load;
 	int min_uV;
 	int max_uV;
@@ -394,6 +395,9 @@ static ssize_t regulator_status_show(struct device *dev,
 	case REGULATOR_STATUS_STANDBY:
 		label = "standby";
 		break;
+	case REGULATOR_STATUS_BYPASS:
+		label = "bypass";
+		break;
 	case REGULATOR_STATUS_UNDEFINED:
 		label = "undefined";
 		break;
@@ -585,6 +589,27 @@ static ssize_t regulator_suspend_standby_state_show(struct device *dev,
 static DEVICE_ATTR(suspend_standby_state, 0444,
 		regulator_suspend_standby_state_show, NULL);
 
+static ssize_t regulator_bypass_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct regulator_dev *rdev = dev_get_drvdata(dev);
+	const char *report;
+	bool bypass;
+	int ret;
+
+	ret = rdev->desc->ops->get_bypass(rdev, &bypass);
+
+	if (ret != 0)
+		report = "unknown";
+	else if (bypass)
+		report = "enabled";
+	else
+		report = "disabled";
+
+	return sprintf(buf, "%s\n", report);
+}
+static DEVICE_ATTR(bypass, 0444,
+		   regulator_bypass_show, NULL);
 
 /*
  * These are the only attributes are present for all regulators.
@@ -2674,6 +2699,100 @@ out:
 EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
 
 /**
+ * regulator_set_bypass_regmap - Default set_bypass() using regmap
+ *
+ * @rdev: device to operate on.
+ * @enable: state to set.
+ */
+int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
+{
+	unsigned int val;
+
+	if (enable)
+		val = rdev->desc->bypass_mask;
+	else
+		val = 0;
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg,
+				  rdev->desc->bypass_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);
+
+/**
+ * regulator_get_bypass_regmap - Default get_bypass() using regmap
+ *
+ * @rdev: device to operate on.
+ * @enable: current state.
+ */
+int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val);
+	if (ret != 0)
+		return ret;
+
+	*enable = val & rdev->desc->bypass_mask;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap);
+
+/**
+ * regulator_allow_bypass - allow the regulator to go into bypass mode
+ *
+ * @regulator: Regulator to configure
+ * @allow: enable or disable bypass mode
+ *
+ * Allow the regulator to go into bypass mode if all other consumers
+ * for the regulator also enable bypass mode and the machine
+ * constraints allow this.  Bypass mode means that the regulator is
+ * simply passing the input directly to the output with no regulation.
+ */
+int regulator_allow_bypass(struct regulator *regulator, bool enable)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	int ret = 0;
+
+	if (!rdev->desc->ops->set_bypass)
+		return 0;
+
+	if (rdev->constraints &&
+	    !(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_BYPASS))
+		return 0;
+
+	mutex_lock(&rdev->mutex);
+
+	if (enable && !regulator->bypass) {
+		rdev->bypass_count++;
+
+		if (rdev->bypass_count == rdev->open_count) {
+			ret = rdev->desc->ops->set_bypass(rdev, enable);
+			if (ret != 0)
+				rdev->bypass_count--;
+		}
+
+	} else if (!enable && regulator->bypass) {
+		rdev->bypass_count--;
+
+		if (rdev->bypass_count != rdev->open_count) {
+			ret = rdev->desc->ops->set_bypass(rdev, enable);
+			if (ret != 0)
+				rdev->bypass_count++;
+		}
+	}
+
+	if (ret == 0)
+		regulator->bypass = enable;
+
+	mutex_unlock(&rdev->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_allow_bypass);
+
+/**
  * regulator_register_notifier - register regulator event notifier
  * @regulator: regulator source
  * @nb: notifier block
@@ -3036,6 +3155,11 @@ static int add_regulator_attributes(struct regulator_dev *rdev)
 		if (status < 0)
 			return status;
 	}
+	if (ops->get_bypass) {
+		status = device_create_file(dev, &dev_attr_bypass);
+		if (status < 0)
+			return status;
+	}
 
 	/* some attributes are type-specific */
 	if (rdev->desc->type == REGULATOR_CURRENT) {
@@ -3124,6 +3248,8 @@ static void rdev_init_debugfs(struct regulator_dev *rdev)
 			   &rdev->use_count);
 	debugfs_create_u32("open_count", 0444, rdev->debugfs,
 			   &rdev->open_count);
+	debugfs_create_u32("bypass_count", 0444, rdev->debugfs,
+			   &rdev->bypass_count);
 }
 
 /**
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index 5cb70ca1e98d..f203a972dedf 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -237,6 +237,8 @@ static struct regulator_ops wm831x_gp_ldo_ops = {
 	.set_mode = wm831x_gp_ldo_set_mode,
 	.get_status = wm831x_gp_ldo_get_status,
 	.get_optimum_mode = wm831x_gp_ldo_get_optimum_mode,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
 
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
@@ -293,6 +295,8 @@ static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev)
 	ldo->desc.vsel_mask = WM831X_LDO1_ON_VSEL_MASK;
 	ldo->desc.enable_reg = WM831X_LDO_ENABLE;
 	ldo->desc.enable_mask = 1 << id;
+	ldo->desc.bypass_reg = ldo->base;
+	ldo->desc.bypass_mask = WM831X_LDO1_SWI;
 
 	config.dev = pdev->dev.parent;
 	if (pdata)
@@ -488,6 +492,8 @@ static struct regulator_ops wm831x_aldo_ops = {
 	.get_mode = wm831x_aldo_get_mode,
 	.set_mode = wm831x_aldo_set_mode,
 	.get_status = wm831x_aldo_get_status,
+	.set_bypass = regulator_set_bypass_regmap,
+	.get_bypass = regulator_get_bypass_regmap,
 
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
@@ -544,6 +550,8 @@ static __devinit int wm831x_aldo_probe(struct platform_device *pdev)
 	ldo->desc.vsel_mask = WM831X_LDO7_ON_VSEL_MASK;
 	ldo->desc.enable_reg = WM831X_LDO_ENABLE;
 	ldo->desc.enable_mask = 1 << id;
+	ldo->desc.bypass_reg = ldo->base;
+	ldo->desc.bypass_mask = WM831X_LDO7_SWI;
 
 	config.dev = pdev->dev.parent;
 	if (pdata)