diff options
author | Miquel van Smoorenburg <miquels@cistron.nl> | 2008-05-02 01:07:27 +0200 |
---|---|---|
committer | James Bottomley <James.Bottomley@HansenPartnership.com> | 2008-05-02 13:17:01 -0500 |
commit | 62ac5aedc51485d672a5d91c262a001acecbe447 (patch) | |
tree | 6ef44abca20c87312defd3486f5c5db82de36128 /drivers | |
parent | 67af2b060e027c84b8e48d77e00b2369d997c0d4 (diff) | |
download | linux-62ac5aedc51485d672a5d91c262a001acecbe447.tar.gz linux-62ac5aedc51485d672a5d91c262a001acecbe447.tar.bz2 linux-62ac5aedc51485d672a5d91c262a001acecbe447.zip |
[SCSI] dpt_i2o: 64 bit support
This is the code to actually support 64 bit platforms. 64 bit
DMA is enabled on both x86_32 PAE and 64 bit platforms.
This code is based in part on the unofficial adaptec 64-bit
dpt_i2o driver update that I got from Mark Salyzyn at Adaptec.
Signed-off-by: Miquel van Smoorenburg <miquels@cistron.nl>
Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/scsi/Kconfig | 3 | ||||
-rw-r--r-- | drivers/scsi/dpt/dpti_ioctl.h | 16 | ||||
-rw-r--r-- | drivers/scsi/dpt/dptsig.h | 8 | ||||
-rw-r--r-- | drivers/scsi/dpt/sys_info.h | 4 | ||||
-rw-r--r-- | drivers/scsi/dpt_i2o.c | 280 | ||||
-rw-r--r-- | drivers/scsi/dpti.h | 2 |
6 files changed, 260 insertions, 53 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 99c57b0c1d54..46d7e400c8be 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -504,10 +504,9 @@ config SCSI_AIC7XXX_OLD source "drivers/scsi/aic7xxx/Kconfig.aic79xx" source "drivers/scsi/aic94xx/Kconfig" -# All the I2O code and drivers do not seem to be 64bit safe. config SCSI_DPT_I2O tristate "Adaptec I2O RAID support " - depends on !64BIT && SCSI && PCI && VIRT_TO_BUS + depends on SCSI && PCI && VIRT_TO_BUS help This driver supports all of Adaptec's I2O based RAID controllers as well as the DPT SmartRaid V cards. This is an Adaptec maintained diff --git a/drivers/scsi/dpt/dpti_ioctl.h b/drivers/scsi/dpt/dpti_ioctl.h index cc784e8f6e9d..f60236721e0d 100644 --- a/drivers/scsi/dpt/dpti_ioctl.h +++ b/drivers/scsi/dpt/dpti_ioctl.h @@ -89,7 +89,7 @@ typedef struct { int njobs; /* # of jobs sent to HA */ int qdepth; /* Controller queue depth. */ int wakebase; /* mpx wakeup base index. */ - uLONG SGsize; /* Scatter/Gather list size. */ + uINT SGsize; /* Scatter/Gather list size. */ unsigned heads; /* heads for drives on cntlr. */ unsigned sectors; /* sectors for drives on cntlr. */ uCHAR do_drive32; /* Flag for Above 16 MB Ability */ @@ -97,8 +97,8 @@ typedef struct { char idPAL[4]; /* 4 Bytes Of The ID Pal */ uCHAR primary; /* 1 For Primary, 0 For Secondary */ uCHAR eataVersion; /* EATA Version */ - uLONG cpLength; /* EATA Command Packet Length */ - uLONG spLength; /* EATA Status Packet Length */ + uINT cpLength; /* EATA Command Packet Length */ + uINT spLength; /* EATA Status Packet Length */ uCHAR drqNum; /* DRQ Index (0,5,6,7) */ uCHAR flag1; /* EATA Flags 1 (Byte 9) */ uCHAR flag2; /* EATA Flags 2 (Byte 30) */ @@ -107,23 +107,23 @@ typedef struct { typedef struct { uSHORT length; // Remaining length of this uSHORT drvrHBAnum; // Relative HBA # used by the driver - uLONG baseAddr; // Base I/O address + uINT baseAddr; // Base I/O address uSHORT blinkState; // Blink LED state (0=Not in blink LED) uCHAR pciBusNum; // PCI Bus # (Optional) uCHAR pciDeviceNum; // PCI Device # (Optional) uSHORT hbaFlags; // Miscellaneous HBA flags uSHORT Interrupt; // Interrupt set for this device. # if (defined(_DPT_ARC)) - uLONG baseLength; + uINT baseLength; ADAPTER_OBJECT *AdapterObject; LARGE_INTEGER DmaLogicalAddress; PVOID DmaVirtualAddress; LARGE_INTEGER ReplyLogicalAddress; PVOID ReplyVirtualAddress; # else - uLONG reserved1; // Reserved for future expansion - uLONG reserved2; // Reserved for future expansion - uLONG reserved3; // Reserved for future expansion + uINT reserved1; // Reserved for future expansion + uINT reserved2; // Reserved for future expansion + uINT reserved3; // Reserved for future expansion # endif } drvrHBAinfo_S; diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h index 94bc894d1200..72c8992fdf21 100644 --- a/drivers/scsi/dpt/dptsig.h +++ b/drivers/scsi/dpt/dptsig.h @@ -33,11 +33,7 @@ /* to make sure we are talking the same size under all OS's */ typedef unsigned char sigBYTE; typedef unsigned short sigWORD; -#if (defined(_MULTI_DATAMODEL) && defined(sun) && !defined(_ILP32)) -typedef uint32_t sigLONG; -#else -typedef unsigned long sigLONG; -#endif +typedef unsigned int sigINT; /* * use sigWORDLittleEndian for: @@ -300,7 +296,7 @@ typedef struct dpt_sig { sigBYTE dsFiletype; /* type of file */ sigBYTE dsFiletypeFlags; /* flags to specify load type, etc. */ sigBYTE dsOEM; /* OEM file was created for */ - sigLONG dsOS; /* which Operating systems */ + sigINT dsOS; /* which Operating systems */ sigWORD dsCapabilities; /* RAID levels, etc. */ sigWORD dsDeviceSupp; /* Types of SCSI devices supported */ sigWORD dsAdapterSupp; /* DPT adapter families supported */ diff --git a/drivers/scsi/dpt/sys_info.h b/drivers/scsi/dpt/sys_info.h index d23b70c8c768..a90c4cb8ea8b 100644 --- a/drivers/scsi/dpt/sys_info.h +++ b/drivers/scsi/dpt/sys_info.h @@ -145,8 +145,8 @@ uCHAR smartROMRevision; uSHORT flags; /* See bit definitions above */ uSHORT conventionalMemSize; /* in KB */ - uLONG extendedMemSize; /* in KB */ - uLONG osType; /* Same as DPTSIG's definition */ + uINT extendedMemSize; /* in KB */ + uINT osType; /* Same as DPTSIG's definition */ uCHAR osMajorVersion; uCHAR osMinorVersion; /* The OS version */ uCHAR osRevision; diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 7b1a084ec94e..dc6b2d4a9aa1 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -111,10 +111,17 @@ static int sys_tbl_len; static adpt_hba* hba_chain = NULL; static int hba_count = 0; +#ifdef CONFIG_COMPAT +static long compat_adpt_ioctl(struct file *, unsigned int, unsigned long); +#endif + static const struct file_operations adpt_fops = { .ioctl = adpt_ioctl, .open = adpt_open, - .release = adpt_close + .release = adpt_close, +#ifdef CONFIG_COMPAT + .compat_ioctl = compat_adpt_ioctl, +#endif }; /* Structures and definitions for synchronous message posting. @@ -138,6 +145,11 @@ static DEFINE_SPINLOCK(adpt_post_wait_lock); *============================================================================ */ +static inline int dpt_dma64(adpt_hba *pHba) +{ + return (sizeof(dma_addr_t) > 4 && (pHba)->dma64); +} + static inline u32 dma_high(dma_addr_t addr) { return upper_32_bits(addr); @@ -277,7 +289,7 @@ static int adpt_release(struct Scsi_Host *host) static void adpt_inquiry(adpt_hba* pHba) { - u32 msg[14]; + u32 msg[17]; u32 *mptr; u32 *lenptr; int direction; @@ -301,7 +313,10 @@ static void adpt_inquiry(adpt_hba* pHba) direction = 0x00000000; scsidir =0x40000000; // DATA IN (iop<--dev) - reqlen = 14; // SINGLE SGE + if (dpt_dma64(pHba)) + reqlen = 17; // SINGLE SGE, 64 bit + else + reqlen = 14; // SINGLE SGE, 32 bit /* Stick the headers on */ msg[0] = reqlen<<16 | SGL_OFFSET_12; msg[1] = (0xff<<24|HOST_TID<<12|ADAPTER_TID); @@ -334,8 +349,16 @@ static void adpt_inquiry(adpt_hba* pHba) /* Now fill in the SGList and command */ *lenptr = len; - *mptr++ = 0xD0000000|direction|len; - *mptr++ = addr; + if (dpt_dma64(pHba)) { + *mptr++ = (0x7C<<24)+(2<<16)+0x02; /* Enable 64 bit */ + *mptr++ = 1 << PAGE_SHIFT; + *mptr++ = 0xD0000000|direction|len; + *mptr++ = dma_low(addr); + *mptr++ = dma_high(addr); + } else { + *mptr++ = 0xD0000000|direction|len; + *mptr++ = addr; + } // Send it on it's way rcode = adpt_i2o_post_wait(pHba, msg, reqlen<<2, 120); @@ -628,6 +651,92 @@ stop_output: return len; } +/* + * Turn a struct scsi_cmnd * into a unique 32 bit 'context'. + */ +static u32 adpt_cmd_to_context(struct scsi_cmnd *cmd) +{ + return (u32)cmd->serial_number; +} + +/* + * Go from a u32 'context' to a struct scsi_cmnd * . + * This could probably be made more efficient. + */ +static struct scsi_cmnd * + adpt_cmd_from_context(adpt_hba * pHba, u32 context) +{ + struct scsi_cmnd * cmd; + struct scsi_device * d; + + if (context == 0) + return NULL; + + spin_unlock(pHba->host->host_lock); + shost_for_each_device(d, pHba->host) { + unsigned long flags; + spin_lock_irqsave(&d->list_lock, flags); + list_for_each_entry(cmd, &d->cmd_list, list) { + if (((u32)cmd->serial_number == context)) { + spin_unlock_irqrestore(&d->list_lock, flags); + scsi_device_put(d); + spin_lock(pHba->host->host_lock); + return cmd; + } + } + spin_unlock_irqrestore(&d->list_lock, flags); + } + spin_lock(pHba->host->host_lock); + + return NULL; +} + +/* + * Turn a pointer to ioctl reply data into an u32 'context' + */ +static u32 adpt_ioctl_to_context(adpt_hba * pHba, void *reply) +{ +#if BITS_PER_LONG == 32 + return (u32)(unsigned long)reply; +#else + ulong flags = 0; + u32 nr, i; + + spin_lock_irqsave(pHba->host->host_lock, flags); + nr = ARRAY_SIZE(pHba->ioctl_reply_context); + for (i = 0; i < nr; i++) { + if (pHba->ioctl_reply_context[i] == NULL) { + pHba->ioctl_reply_context[i] = reply; + break; + } + } + spin_unlock_irqrestore(pHba->host->host_lock, flags); + if (i >= nr) { + kfree (reply); + printk(KERN_WARNING"%s: Too many outstanding " + "ioctl commands\n", pHba->name); + return (u32)-1; + } + + return i; +#endif +} + +/* + * Go from an u32 'context' to a pointer to ioctl reply data. + */ +static void *adpt_ioctl_from_context(adpt_hba *pHba, u32 context) +{ +#if BITS_PER_LONG == 32 + return (void *)(unsigned long)context; +#else + void *p = pHba->ioctl_reply_context[context]; + pHba->ioctl_reply_context[context] = NULL; + + return p; +#endif +} + /*=========================================================================== * Error Handling routines *=========================================================================== @@ -655,7 +764,7 @@ static int adpt_abort(struct scsi_cmnd * cmd) msg[1] = I2O_CMD_SCSI_ABORT<<24|HOST_TID<<12|dptdevice->tid; msg[2] = 0; msg[3]= 0; - msg[4] = (u32)cmd; + msg[4] = adpt_cmd_to_context(cmd); if (pHba->host) spin_lock_irq(pHba->host->host_lock); rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER); @@ -867,6 +976,7 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev u32 hba_map1_area_size = 0; void __iomem *base_addr_virt = NULL; void __iomem *msg_addr_virt = NULL; + int dma64 = 0; int raptorFlag = FALSE; @@ -880,7 +990,16 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev } pci_set_master(pDev); - if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) + + /* + * See if we should enable dma64 mode. + */ + if (sizeof(dma_addr_t) > 4 && + pci_set_dma_mask(pDev, DMA_64BIT_MASK) == 0) { + if (dma_get_required_mask(&pDev->dev) > DMA_32BIT_MASK) + dma64 = 1; + } + if (!dma64 && pci_set_dma_mask(pDev, DMA_32BIT_MASK) != 0) return -EINVAL; /* adapter only supports message blocks below 4GB */ @@ -906,6 +1025,25 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev raptorFlag = TRUE; } +#if BITS_PER_LONG == 64 + /* + * The original Adaptec 64 bit driver has this comment here: + * "x86_64 machines need more optimal mappings" + * + * I assume some HBAs report ridiculously large mappings + * and we need to limit them on platforms with IOMMUs. + */ + if (raptorFlag == TRUE) { + if (hba_map0_area_size > 128) + hba_map0_area_size = 128; + if (hba_map1_area_size > 524288) + hba_map1_area_size = 524288; + } else { + if (hba_map0_area_size > 524288) + hba_map0_area_size = 524288; + } +#endif + base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size); if (!base_addr_virt) { pci_release_regions(pDev); @@ -968,16 +1106,22 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev pHba->state = DPTI_STATE_RESET; pHba->pDev = pDev; pHba->devices = NULL; + pHba->dma64 = dma64; // Initializing the spinlocks spin_lock_init(&pHba->state_lock); spin_lock_init(&adpt_post_wait_lock); if(raptorFlag == 0){ - printk(KERN_INFO"Adaptec I2O RAID controller %d at %p size=%x irq=%d\n", - hba_count-1, base_addr_virt, hba_map0_area_size, pDev->irq); + printk(KERN_INFO "Adaptec I2O RAID controller" + " %d at %p size=%x irq=%d%s\n", + hba_count-1, base_addr_virt, + hba_map0_area_size, pDev->irq, + dma64 ? " (64-bit DMA)" : ""); } else { - printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d\n",hba_count-1, pDev->irq); + printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d%s\n", + hba_count-1, pDev->irq, + dma64 ? " (64-bit DMA)" : ""); printk(KERN_INFO" BAR0 %p - size= %x\n",base_addr_virt,hba_map0_area_size); printk(KERN_INFO" BAR1 %p - size= %x\n",msg_addr_virt,hba_map1_area_size); } @@ -1030,6 +1174,8 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) if(pHba->msg_addr_virt != pHba->base_addr_virt){ iounmap(pHba->msg_addr_virt); } + if(pHba->FwDebugBuffer_P) + iounmap(pHba->FwDebugBuffer_P); if(pHba->hrt) { dma_free_coherent(&pHba->pDev->dev, pHba->hrt->num_entries * pHba->hrt->entry_len << 2, @@ -1657,10 +1803,13 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) } sg_offset = (msg[0]>>4)&0xf; msg[2] = 0x40000000; // IOCTL context - msg[3] = (u32)reply; + msg[3] = adpt_ioctl_to_context(pHba, reply); + if (msg[3] == (u32)-1) + return -EBUSY; + memset(sg_list,0, sizeof(sg_list[0])*pHba->sg_tablesize); if(sg_offset) { - // TODO 64bit fix + // TODO add 64 bit API struct sg_simple_element *sg = (struct sg_simple_element*) (msg+sg_offset); sg_count = (size - sg_offset*4) / sizeof(struct sg_simple_element); if (sg_count > pHba->sg_tablesize){ @@ -1689,15 +1838,15 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) sg_list[sg_index++] = p; // sglist indexed with input frame, not our internal frame. /* Copy in the user's SG buffer if necessary */ if(sg[i].flag_count & 0x04000000 /*I2O_SGL_FLAGS_DIR*/) { - // TODO 64bit fix - if (copy_from_user(p,(void __user *)sg[i].addr_bus, sg_size)) { + // sg_simple_element API is 32 bit + if (copy_from_user(p,(void __user *)(ulong)sg[i].addr_bus, sg_size)) { printk(KERN_DEBUG"%s: Could not copy SG buf %d FROM user\n",pHba->name,i); rcode = -EFAULT; goto cleanup; } } - //TODO 64bit fix - sg[i].addr_bus = (u32)virt_to_bus(p); + /* sg_simple_element API is 32 bit, but addr < 4GB */ + sg[i].addr_bus = addr; } } @@ -1725,7 +1874,7 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) if(sg_offset) { /* Copy back the Scatter Gather buffers back to user space */ u32 j; - // TODO 64bit fix + // TODO add 64 bit API struct sg_simple_element* sg; int sg_size; @@ -1745,14 +1894,14 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) } sg_count = (size - sg_offset*4) / sizeof(struct sg_simple_element); - // TODO 64bit fix + // TODO add 64 bit API sg = (struct sg_simple_element*)(msg + sg_offset); for (j = 0; j < sg_count; j++) { /* Copy out the SG list to user's buffer if necessary */ if(! (sg[j].flag_count & 0x4000000 /*I2O_SGL_FLAGS_DIR*/)) { sg_size = sg[j].flag_count & 0xffffff; - // TODO 64bit fix - if (copy_to_user((void __user *)sg[j].addr_bus,sg_list[j], sg_size)) { + // sg_simple_element API is 32 bit + if (copy_to_user((void __user *)(ulong)sg[j].addr_bus,sg_list[j], sg_size)) { printk(KERN_WARNING"%s: Could not copy %p TO user %x\n",pHba->name, sg_list[j], sg[j].addr_bus); rcode = -EFAULT; goto cleanup; @@ -1972,6 +2121,38 @@ static int adpt_ioctl(struct inode *inode, struct file *file, uint cmd, return error; } +#ifdef CONFIG_COMPAT +static long compat_adpt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct inode *inode; + long ret; + + inode = file->f_dentry->d_inode; + + lock_kernel(); + + switch(cmd) { + case DPT_SIGNATURE: + case I2OUSRCMD: + case DPT_CTRLINFO: + case DPT_SYSINFO: + case DPT_BLINKLED: + case I2ORESETCMD: + case I2ORESCANCMD: + case (DPT_TARGET_BUSY & 0xFFFF): + case DPT_TARGET_BUSY: + ret = adpt_ioctl(inode, file, cmd, arg); + break; + default: + ret = -ENOIOCTLCMD; + } + + unlock_kernel(); + + return ret; +} +#endif static irqreturn_t adpt_isr(int irq, void *dev_id) { @@ -2032,7 +2213,7 @@ static irqreturn_t adpt_isr(int irq, void *dev_id) } context = readl(reply+8); if(context & 0x40000000){ // IOCTL - void *p = (void *)readl(reply+12); + void *p = adpt_ioctl_from_context(pHba, readl(reply+12)); if( p != NULL) { memcpy_fromio(p, reply, REPLY_FRAME_SIZE * 4); } @@ -2046,14 +2227,15 @@ static irqreturn_t adpt_isr(int irq, void *dev_id) status = I2O_POST_WAIT_OK; } if(!(context & 0x40000000)) { - cmd = (struct scsi_cmnd*) readl(reply+12); + cmd = adpt_cmd_from_context(pHba, + readl(reply+12)); if(cmd != NULL) { printk(KERN_WARNING"%s: Apparent SCSI cmd in Post Wait Context - cmd=%p context=%x\n", pHba->name, cmd, context); } } adpt_i2o_post_wait_complete(context, status); } else { // SCSI message - cmd = (struct scsi_cmnd*) readl(reply+12); + cmd = adpt_cmd_from_context (pHba, readl(reply+12)); if(cmd != NULL){ scsi_dma_unmap(cmd); if(cmd->serial_number != 0) { // If not timedout @@ -2076,6 +2258,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d int i; u32 msg[MAX_MESSAGE_SIZE]; u32* mptr; + u32* lptr; u32 *lenptr; int direction; int scsidir; @@ -2083,6 +2266,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d u32 len; u32 reqlen; s32 rcode; + dma_addr_t addr; memset(msg, 0 , sizeof(msg)); len = scsi_bufflen(cmd); @@ -2122,7 +2306,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d // I2O_CMD_SCSI_EXEC msg[1] = ((0xff<<24)|(HOST_TID<<12)|d->tid); msg[2] = 0; - msg[3] = (u32)cmd; /* We want the SCSI control block back */ + msg[3] = adpt_cmd_to_context(cmd); /* Want SCSI control block back */ // Our cards use the transaction context as the tag for queueing // Adaptec/DPT Private stuff msg[4] = I2O_CMD_SCSI_EXEC|(DPT_ORGANIZATION_ID<<16); @@ -2140,7 +2324,13 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d memcpy(mptr, cmd->cmnd, cmd->cmd_len); mptr+=4; lenptr=mptr++; /* Remember me - fill in when we know */ - reqlen = 14; // SINGLE SGE + if (dpt_dma64(pHba)) { + reqlen = 16; // SINGLE SGE + *mptr++ = (0x7C<<24)+(2<<16)+0x02; /* Enable 64 bit */ + *mptr++ = 1 << PAGE_SHIFT; + } else { + reqlen = 14; // SINGLE SGE + } /* Now fill in the SGList and command */ nseg = scsi_dma_map(cmd); @@ -2150,12 +2340,16 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d len = 0; scsi_for_each_sg(cmd, sg, nseg, i) { + lptr = mptr; *mptr++ = direction|0x10000000|sg_dma_len(sg); len+=sg_dma_len(sg); - *mptr++ = sg_dma_address(sg); + addr = sg_dma_address(sg); + *mptr++ = dma_low(addr); + if (dpt_dma64(pHba)) + *mptr++ = dma_high(addr); /* Make this an end of list */ if (i == nseg - 1) - mptr[-2] = direction|0xD0000000|sg_dma_len(sg); + *lptr = direction|0xD0000000|sg_dma_len(sg); } reqlen = mptr - msg; *lenptr = len; @@ -2824,7 +3018,17 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba) } // Calculate the Scatter Gather list size - pHba->sg_tablesize = (pHba->status_block->inbound_frame_size * 4 -40)/ sizeof(struct sg_simple_element); + if (dpt_dma64(pHba)) { + pHba->sg_tablesize + = ((pHba->status_block->inbound_frame_size * 4 + - 14 * sizeof(u32)) + / (sizeof(struct sg_simple_element) + sizeof(u32))); + } else { + pHba->sg_tablesize + = ((pHba->status_block->inbound_frame_size * 4 + - 12 * sizeof(u32)) + / sizeof(struct sg_simple_element)); + } if (pHba->sg_tablesize > SG_LIST_ELEMENTS) { pHba->sg_tablesize = SG_LIST_ELEMENTS; } @@ -2916,13 +3120,19 @@ static int adpt_i2o_lct_get(adpt_hba* pHba) // I2O_DPT_EXEC_IOP_BUFFERS_GROUP_NO; if(adpt_i2o_query_scalar(pHba, 0 , 0x8000, -1, buf, sizeof(buf))>=0) { pHba->FwDebugBufferSize = buf[1]; - pHba->FwDebugBuffer_P = pHba->base_addr_virt + buf[0]; - pHba->FwDebugFlags_P = pHba->FwDebugBuffer_P + FW_DEBUG_FLAGS_OFFSET; - pHba->FwDebugBLEDvalue_P = pHba->FwDebugBuffer_P + FW_DEBUG_BLED_OFFSET; - pHba->FwDebugBLEDflag_P = pHba->FwDebugBLEDvalue_P + 1; - pHba->FwDebugStrLength_P = pHba->FwDebugBuffer_P + FW_DEBUG_STR_LENGTH_OFFSET; - pHba->FwDebugBuffer_P += buf[2]; - pHba->FwDebugFlags = 0; + pHba->FwDebugBuffer_P = ioremap(pHba->base_addr_phys + buf[0], + pHba->FwDebugBufferSize); + if (pHba->FwDebugBuffer_P) { + pHba->FwDebugFlags_P = pHba->FwDebugBuffer_P + + FW_DEBUG_FLAGS_OFFSET; + pHba->FwDebugBLEDvalue_P = pHba->FwDebugBuffer_P + + FW_DEBUG_BLED_OFFSET; + pHba->FwDebugBLEDflag_P = pHba->FwDebugBLEDvalue_P + 1; + pHba->FwDebugStrLength_P = pHba->FwDebugBuffer_P + + FW_DEBUG_STR_LENGTH_OFFSET; + pHba->FwDebugBuffer_P += buf[2]; + pHba->FwDebugFlags = 0; + } } return 0; diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h index 5181b92c9ddb..924cd5a51676 100644 --- a/drivers/scsi/dpti.h +++ b/drivers/scsi/dpti.h @@ -233,6 +233,7 @@ typedef struct _adpt_hba { u8 top_scsi_channel; u8 top_scsi_id; u8 top_scsi_lun; + u8 dma64; i2o_status_block* status_block; dma_addr_t status_block_pa; @@ -252,6 +253,7 @@ typedef struct _adpt_hba { void __iomem *FwDebugBLEDflag_P;// Virtual Addr Of FW Debug BLED void __iomem *FwDebugBLEDvalue_P;// Virtual Addr Of FW Debug BLED u32 FwDebugFlags; + u32 *ioctl_reply_context[4]; } adpt_hba; struct sg_simple_element { |