Merge branch 'master' into for-linus

Conflicts:
	block/Kconfig

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

505 files changed, 9662 insertions, 7180 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index 81e36596b1e9..34f1e1064dbc 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_SGI_SN)		+= sn/
 obj-y				+= firmware/
 obj-$(CONFIG_CRYPTO)		+= crypto/
 obj-$(CONFIG_SUPERH)		+= sh/
+obj-$(CONFIG_ARCH_SHMOBILE)	+= sh/
 obj-$(CONFIG_GENERIC_TIME)	+= clocksource/
 obj-$(CONFIG_DMA_ENGINE)	+= dma/
 obj-$(CONFIG_DCA)		+= dca/
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 66cc3f36a954..a8d8998dd5c5 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -32,7 +32,7 @@ acpi-$(CONFIG_ACPI_SLEEP)	+= proc.o
 #
 acpi-y				+= bus.o glue.o
 acpi-y				+= scan.o
-acpi-y				+= processor_pdc.o
+acpi-y				+= processor_core.o
 acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-y				+= pci_root.o pci_link.o pci_irq.o pci_bind.o
@@ -61,7 +61,7 @@ obj-$(CONFIG_ACPI_SBS)		+= sbs.o
 obj-$(CONFIG_ACPI_POWER_METER)	+= power_meter.o
 
 # processor has its own "processor." module_param namespace
-processor-y			:= processor_core.o processor_throttling.o
+processor-y			:= processor_driver.o processor_throttling.o
 processor-y			+= processor_idle.o processor_thermal.o
 processor-$(CONFIG_CPU_FREQ)	+= processor_perflib.o
 
diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c
index cc8a10268f68..7116bc86494d 100644
--- a/drivers/acpi/acpica/exmutex.c
+++ b/drivers/acpi/acpica/exmutex.c
@@ -375,8 +375,7 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 		return_ACPI_STATUS(AE_AML_MUTEX_NOT_ACQUIRED);
 	}
 
-	/* Must have a valid thread ID */
-
+	/* Must have a valid thread. */
 	if (!walk_state->thread) {
 		ACPI_ERROR((AE_INFO,
 			    "Cannot release Mutex [%4.4s], null thread info",
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 58d2c91ba62b..75f39f2c166d 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -54,6 +54,7 @@
 #define ACPI_BATTERY_DEVICE_NAME	"Battery"
 #define ACPI_BATTERY_NOTIFY_STATUS	0x80
 #define ACPI_BATTERY_NOTIFY_INFO	0x81
+#define ACPI_BATTERY_NOTIFY_THRESHOLD   0x82
 
 #define _COMPONENT		ACPI_BATTERY_COMPONENT
 
@@ -88,10 +89,15 @@ static const struct acpi_device_id battery_device_ids[] = {
 
 MODULE_DEVICE_TABLE(acpi, battery_device_ids);
 
-/* For buggy DSDTs that report negative 16-bit values for either charging
- * or discharging current and/or report 0 as 65536 due to bad math.
- */
-#define QUIRK_SIGNED16_CURRENT 0x0001
+enum {
+	ACPI_BATTERY_ALARM_PRESENT,
+	ACPI_BATTERY_XINFO_PRESENT,
+	/* For buggy DSDTs that report negative 16-bit values for either
+	 * charging or discharging current and/or report 0 as 65536
+	 * due to bad math.
+	 */
+	ACPI_BATTERY_QUIRK_SIGNED16_CURRENT,
+};
 
 struct acpi_battery {
 	struct mutex lock;
@@ -109,6 +115,12 @@ struct acpi_battery {
 	int design_voltage;
 	int design_capacity_warning;
 	int design_capacity_low;
+	int cycle_count;
+	int measurement_accuracy;
+	int max_sampling_time;
+	int min_sampling_time;
+	int max_averaging_interval;
+	int min_averaging_interval;
 	int capacity_granularity_1;
 	int capacity_granularity_2;
 	int alarm;
@@ -118,8 +130,7 @@ struct acpi_battery {
 	char oem_info[32];
 	int state;
 	int power_unit;
-	u8 alarm_present;
-	long quirks;
+	unsigned long flags;
 };
 
 #define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
@@ -198,6 +209,9 @@ static int acpi_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
 		val->intval = acpi_battery_technology(battery);
 		break;
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		val->intval = battery->cycle_count;
+		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 		val->intval = battery->design_voltage * 1000;
 		break;
@@ -239,6 +253,7 @@ static enum power_supply_property charge_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
@@ -254,6 +269,7 @@ static enum power_supply_property energy_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
@@ -305,6 +321,28 @@ static struct acpi_offsets info_offsets[] = {
 	{offsetof(struct acpi_battery, oem_info), 1},
 };
 
+static struct acpi_offsets extended_info_offsets[] = {
+	{offsetof(struct acpi_battery, power_unit), 0},
+	{offsetof(struct acpi_battery, design_capacity), 0},
+	{offsetof(struct acpi_battery, full_charge_capacity), 0},
+	{offsetof(struct acpi_battery, technology), 0},
+	{offsetof(struct acpi_battery, design_voltage), 0},
+	{offsetof(struct acpi_battery, design_capacity_warning), 0},
+	{offsetof(struct acpi_battery, design_capacity_low), 0},
+	{offsetof(struct acpi_battery, cycle_count), 0},
+	{offsetof(struct acpi_battery, measurement_accuracy), 0},
+	{offsetof(struct acpi_battery, max_sampling_time), 0},
+	{offsetof(struct acpi_battery, min_sampling_time), 0},
+	{offsetof(struct acpi_battery, max_averaging_interval), 0},
+	{offsetof(struct acpi_battery, min_averaging_interval), 0},
+	{offsetof(struct acpi_battery, capacity_granularity_1), 0},
+	{offsetof(struct acpi_battery, capacity_granularity_2), 0},
+	{offsetof(struct acpi_battery, model_number), 1},
+	{offsetof(struct acpi_battery, serial_number), 1},
+	{offsetof(struct acpi_battery, type), 1},
+	{offsetof(struct acpi_battery, oem_info), 1},
+};
+
 static int extract_package(struct acpi_battery *battery,
 			   union acpi_object *package,
 			   struct acpi_offsets *offsets, int num)
@@ -350,22 +388,29 @@ static int acpi_battery_get_info(struct acpi_battery *battery)
 {
 	int result = -EFAULT;
 	acpi_status status = 0;
+	char *name = test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags)?
+			"_BIX" : "_BIF";
+
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
 	if (!acpi_battery_present(battery))
 		return 0;
 	mutex_lock(&battery->lock);
-	status = acpi_evaluate_object(battery->device->handle, "_BIF",
-				      NULL, &buffer);
+	status = acpi_evaluate_object(battery->device->handle, name,
+						NULL, &buffer);
 	mutex_unlock(&battery->lock);
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BIF"));
+		ACPI_EXCEPTION((AE_INFO, status, "Evaluating %s", name));
 		return -ENODEV;
 	}
-
-	result = extract_package(battery, buffer.pointer,
-				 info_offsets, ARRAY_SIZE(info_offsets));
+	if (test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags))
+		result = extract_package(battery, buffer.pointer,
+				extended_info_offsets,
+				ARRAY_SIZE(extended_info_offsets));
+	else
+		result = extract_package(battery, buffer.pointer,
+				info_offsets, ARRAY_SIZE(info_offsets));
 	kfree(buffer.pointer);
 	return result;
 }
@@ -399,7 +444,7 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
 	battery->update_time = jiffies;
 	kfree(buffer.pointer);
 
-	if ((battery->quirks & QUIRK_SIGNED16_CURRENT) &&
+	if (test_bit(ACPI_BATTERY_QUIRK_SIGNED16_CURRENT, &battery->flags) &&
 	    battery->rate_now != -1)
 		battery->rate_now = abs((s16)battery->rate_now);
 
@@ -412,7 +457,8 @@ static int acpi_battery_set_alarm(struct acpi_battery *battery)
 	union acpi_object arg0 = { .type = ACPI_TYPE_INTEGER };
 	struct acpi_object_list arg_list = { 1, &arg0 };
 
-	if (!acpi_battery_present(battery)|| !battery->alarm_present)
+	if (!acpi_battery_present(battery) ||
+	    !test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags))
 		return -ENODEV;
 
 	arg0.integer.value = battery->alarm;
@@ -437,10 +483,10 @@ static int acpi_battery_init_alarm(struct acpi_battery *battery)
 	/* See if alarms are supported, and if so, set default */
 	status = acpi_get_handle(battery->device->handle, "_BTP", &handle);
 	if (ACPI_FAILURE(status)) {
-		battery->alarm_present = 0;
+		clear_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags);
 		return 0;
 	}
-	battery->alarm_present = 1;
+	set_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags);
 	if (!battery->alarm)
 		battery->alarm = battery->design_capacity_warning;
 	return acpi_battery_set_alarm(battery);
@@ -510,9 +556,8 @@ static void sysfs_remove_battery(struct acpi_battery *battery)
 
 static void acpi_battery_quirks(struct acpi_battery *battery)
 {
-	battery->quirks = 0;
 	if (dmi_name_in_vendors("Acer") && battery->power_unit) {
-		battery->quirks |= QUIRK_SIGNED16_CURRENT;
+		set_bit(ACPI_BATTERY_QUIRK_SIGNED16_CURRENT, &battery->flags);
 	}
 }
 
@@ -590,6 +635,7 @@ static int acpi_battery_print_info(struct seq_file *seq, int result)
 	seq_printf(seq, "design capacity low:     %d %sh\n",
 		   battery->design_capacity_low,
 		   acpi_battery_units(battery));
+	seq_printf(seq, "cycle count:		  %i\n", battery->cycle_count);
 	seq_printf(seq, "capacity granularity 1:  %d %sh\n",
 		   battery->capacity_granularity_1,
 		   acpi_battery_units(battery));
@@ -841,6 +887,7 @@ static int acpi_battery_add(struct acpi_device *device)
 {
 	int result = 0;
 	struct acpi_battery *battery = NULL;
+	acpi_handle handle;
 	if (!device)
 		return -EINVAL;
 	battery = kzalloc(sizeof(struct acpi_battery), GFP_KERNEL);
@@ -851,6 +898,9 @@ static int acpi_battery_add(struct acpi_device *device)
 	strcpy(acpi_device_class(device), ACPI_BATTERY_CLASS);
 	device->driver_data = battery;
 	mutex_init(&battery->lock);
+	if (ACPI_SUCCESS(acpi_get_handle(battery->device->handle,
+			"_BIX", &handle)))
+		set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags);
 	acpi_battery_update(battery);
 #ifdef CONFIG_ACPI_PROCFS_POWER
 	result = acpi_battery_add_fs(device);
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index a52126e46307..b70cd3756142 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -190,16 +190,16 @@ int acpi_bus_get_power(acpi_handle handle, int *state)
 		 * Get the device's power state either directly (via _PSC) or
 		 * indirectly (via power resources).
 		 */
-		if (device->power.flags.explicit_get) {
+		if (device->power.flags.power_resources) {
+			result = acpi_power_get_inferred_state(device);
+			if (result)
+				return result;
+		} else if (device->power.flags.explicit_get) {
 			status = acpi_evaluate_integer(device->handle, "_PSC",
 						       NULL, &psc);
 			if (ACPI_FAILURE(status))
 				return -ENODEV;
 			device->power.state = (int)psc;
-		} else if (device->power.flags.power_resources) {
-			result = acpi_power_get_inferred_state(device);
-			if (result)
-				return result;
 		}
 
 		*state = device->power.state;
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index b2586f57e1f5..d9a85f1ddde6 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -605,7 +605,7 @@ register_hotplug_dock_device(acpi_handle handle, struct acpi_dock_ops *ops,
 	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		/*
 		 * An ATA bay can be in a dock and itself can be ejected
-		 * seperately, so there are two 'dock stations' which need the
+		 * separately, so there are two 'dock stations' which need the
 		 * ops
 		 */
 		dd = find_dock_dependent_device(dock_station, handle);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index d7a6bbbb834c..1ac28c6a672e 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -76,8 +76,9 @@ enum ec_command {
 enum {
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
 	EC_FLAGS_GPE_STORM,		/* GPE storm detected */
-	EC_FLAGS_HANDLERS_INSTALLED	/* Handlers for GPE and
+	EC_FLAGS_HANDLERS_INSTALLED,	/* Handlers for GPE and
 					 * OpReg are installed */
+	EC_FLAGS_FROZEN,		/* Transactions are suspended */
 };
 
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
@@ -291,6 +292,10 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
 	if (t->rdata)
 		memset(t->rdata, 0, t->rlen);
 	mutex_lock(&ec->lock);
+	if (test_bit(EC_FLAGS_FROZEN, &ec->flags)) {
+		status = -EINVAL;
+		goto unlock;
+	}
 	if (ec->global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status)) {
@@ -453,6 +458,32 @@ int ec_transaction(u8 command,
 
 EXPORT_SYMBOL(ec_transaction);
 
+void acpi_ec_suspend_transactions(void)
+{
+	struct acpi_ec *ec = first_ec;
+
+	if (!ec)
+		return;
+
+	mutex_lock(&ec->lock);
+	/* Prevent transactions from being carried out */
+	set_bit(EC_FLAGS_FROZEN, &ec->flags);
+	mutex_unlock(&ec->lock);
+}
+
+void acpi_ec_resume_transactions(void)
+{
+	struct acpi_ec *ec = first_ec;
+
+	if (!ec)
+		return;
+
+	mutex_lock(&ec->lock);
+	/* Allow transactions to be carried out again */
+	clear_bit(EC_FLAGS_FROZEN, &ec->flags);
+	mutex_unlock(&ec->lock);
+}
+
 static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data)
 {
 	int result;
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 9c4c962e46e3..e28411367239 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -49,6 +49,8 @@ void acpi_early_processor_set_pdc(void);
 int acpi_ec_init(void);
 int acpi_ec_ecdt_probe(void);
 int acpi_boot_ec_enable(void);
+void acpi_ec_suspend_transactions(void);
+void acpi_ec_resume_transactions(void);
 
 /*--------------------------------------------------------------------------
                                   Suspend/Resume
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index d0d25e2e1ced..1ac678d2c51c 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -435,7 +435,7 @@ acpi_system_write_wakeup_device(struct file *file,
 				found_dev->wakeup.gpe_device)) {
 				printk(KERN_WARNING
 				       "ACPI: '%s' and '%s' have the same GPE, "
-				       "can't disable/enable one seperately\n",
+				       "can't disable/enable one separately\n",
 				       dev->pnp.bus_id, found_dev->pnp.bus_id);
 				dev->wakeup.state.enabled =
 				    found_dev->wakeup.state.enabled;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index e9b7b402dbfb..791ac7b0f8df 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -1,383 +1,62 @@
 /*
- * acpi_processor.c - ACPI Processor Driver ($Revision: 71 $)
+ * Copyright (C) 2005 Intel Corporation
+ * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
  *
- *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
- *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- *  Copyright (C) 2004       Dominik Brodowski <linux@brodo.de>
- *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
- *  			- Added processor hotplug support
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or (at
- *  your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *  TBD:
- *	1. Make # power states dynamic.
- *	2. Support duty_cycle values that span bit 4.
- *	3. Optimize by having scheduler determine business instead of
- *	   having us try to calculate it here.
- *	4. Need C1 timing -- must modify kernel (IRQ handler) to get this.
+ *	Alex Chiang <achiang@hp.com>
+ *	- Unified x86/ia64 implementations
+ *	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *	- Added _PDC for platforms with Intel CPUs
  */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
 #include <linux/dmi.h>
-#include <linux/moduleparam.h>
-#include <linux/cpuidle.h>
 
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/cpu.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
-#include <asm/smp.h>
-#include <asm/acpi.h>
-
-#include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 #include <acpi/processor.h>
 
-#define PREFIX "ACPI: "
-
-#define ACPI_PROCESSOR_CLASS		"processor"
-#define ACPI_PROCESSOR_DEVICE_NAME	"Processor"
-#define ACPI_PROCESSOR_FILE_INFO	"info"
-#define ACPI_PROCESSOR_FILE_THROTTLING	"throttling"
-#define ACPI_PROCESSOR_FILE_LIMIT	"limit"
-#define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80
-#define ACPI_PROCESSOR_NOTIFY_POWER	0x81
-#define ACPI_PROCESSOR_NOTIFY_THROTTLING	0x82
-
-#define ACPI_PROCESSOR_LIMIT_USER	0
-#define ACPI_PROCESSOR_LIMIT_THERMAL	1
+#include "internal.h"
 
+#define PREFIX			"ACPI: "
 #define _COMPONENT		ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_core");
 
-MODULE_AUTHOR("Paul Diefenbaugh");
-MODULE_DESCRIPTION("ACPI Processor Driver");
-MODULE_LICENSE("GPL");
-
-static int acpi_processor_add(struct acpi_device *device);
-static int acpi_processor_remove(struct acpi_device *device, int type);
-#ifdef CONFIG_ACPI_PROCFS
-static int acpi_processor_info_open_fs(struct inode *inode, struct file *file);
-#endif
-static void acpi_processor_notify(struct acpi_device *device, u32 event);
-static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
-static int acpi_processor_handle_eject(struct acpi_processor *pr);
-
-
-static const struct acpi_device_id processor_device_ids[] = {
-	{ACPI_PROCESSOR_OBJECT_HID, 0},
-	{"ACPI0007", 0},
-	{"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, processor_device_ids);
-
-static struct acpi_driver acpi_processor_driver = {
-	.name = "processor",
-	.class = ACPI_PROCESSOR_CLASS,
-	.ids = processor_device_ids,
-	.ops = {
-		.add = acpi_processor_add,
-		.remove = acpi_processor_remove,
-		.suspend = acpi_processor_suspend,
-		.resume = acpi_processor_resume,
-		.notify = acpi_processor_notify,
-		},
-};
-
-#define INSTALL_NOTIFY_HANDLER		1
-#define UNINSTALL_NOTIFY_HANDLER	2
-#ifdef CONFIG_ACPI_PROCFS
-static const struct file_operations acpi_processor_info_fops = {
-	.owner = THIS_MODULE,
-	.open = acpi_processor_info_open_fs,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-#endif
-
-DEFINE_PER_CPU(struct acpi_processor *, processors);
-EXPORT_PER_CPU_SYMBOL(processors);
-
-struct acpi_processor_errata errata __read_mostly;
-
-/* --------------------------------------------------------------------------
-                                Errata Handling
-   -------------------------------------------------------------------------- */
-
-static int acpi_processor_errata_piix4(struct pci_dev *dev)
+static int set_no_mwait(const struct dmi_system_id *id)
 {
-	u8 value1 = 0;
-	u8 value2 = 0;
-
-
-	if (!dev)
-		return -EINVAL;
-
-	/*
-	 * Note that 'dev' references the PIIX4 ACPI Controller.
-	 */
-
-	switch (dev->revision) {
-	case 0:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
-		break;
-	case 1:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
-		break;
-	case 2:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
-		break;
-	case 3:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
-		break;
-	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
-		break;
-	}
-
-	switch (dev->revision) {
-
-	case 0:		/* PIIX4 A-step */
-	case 1:		/* PIIX4 B-step */
-		/*
-		 * See specification changes #13 ("Manual Throttle Duty Cycle")
-		 * and #14 ("Enabling and Disabling Manual Throttle"), plus
-		 * erratum #5 ("STPCLK# Deassertion Time") from the January
-		 * 2002 PIIX4 specification update.  Applies to only older
-		 * PIIX4 models.
-		 */
-		errata.piix4.throttle = 1;
-
-	case 2:		/* PIIX4E */
-	case 3:		/* PIIX4M */
-		/*
-		 * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA
-		 * Livelock") from the January 2002 PIIX4 specification update.
-		 * Applies to all PIIX4 models.
-		 */
-
-		/*
-		 * BM-IDE
-		 * ------
-		 * Find the PIIX4 IDE Controller and get the Bus Master IDE
-		 * Status register address.  We'll use this later to read
-		 * each IDE controller's DMA status to make sure we catch all
-		 * DMA activity.
-		 */
-		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-				     PCI_DEVICE_ID_INTEL_82371AB,
-				     PCI_ANY_ID, PCI_ANY_ID, NULL);
-		if (dev) {
-			errata.piix4.bmisx = pci_resource_start(dev, 4);
-			pci_dev_put(dev);
-		}
-
-		/*
-		 * Type-F DMA
-		 * ----------
-		 * Find the PIIX4 ISA Controller and read the Motherboard
-		 * DMA controller's status to see if Type-F (Fast) DMA mode
-		 * is enabled (bit 7) on either channel.  Note that we'll
-		 * disable C3 support if this is enabled, as some legacy
-		 * devices won't operate well if fast DMA is disabled.
-		 */
-		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-				     PCI_DEVICE_ID_INTEL_82371AB_0,
-				     PCI_ANY_ID, PCI_ANY_ID, NULL);
-		if (dev) {
-			pci_read_config_byte(dev, 0x76, &value1);
-			pci_read_config_byte(dev, 0x77, &value2);
-			if ((value1 & 0x80) || (value2 & 0x80))
-				errata.piix4.fdma = 1;
-			pci_dev_put(dev);
-		}
-
-		break;
-	}
-
-	if (errata.piix4.bmisx)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Bus master activity detection (BM-IDE) erratum enabled\n"));
-	if (errata.piix4.fdma)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Type-F DMA livelock erratum (C3 disabled)\n"));
-
+	printk(KERN_NOTICE PREFIX "%s detected - "
+		"disabling mwait for CPU C-states\n", id->ident);
+	idle_nomwait = 1;
 	return 0;
 }
 
-static int acpi_processor_errata(struct acpi_processor *pr)
-{
-	int result = 0;
-	struct pci_dev *dev = NULL;
-
-
-	if (!pr)
-		return -EINVAL;
-
-	/*
-	 * PIIX4
-	 */
-	dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-			     PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID,
-			     PCI_ANY_ID, NULL);
-	if (dev) {
-		result = acpi_processor_errata_piix4(dev);
-		pci_dev_put(dev);
-	}
-
-	return result;
-}
-
-/* --------------------------------------------------------------------------
-                              FS Interface (/proc)
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI_PROCFS
-static struct proc_dir_entry *acpi_processor_dir = NULL;
-
-static int acpi_processor_info_seq_show(struct seq_file *seq, void *offset)
-{
-	struct acpi_processor *pr = seq->private;
-
-
-	if (!pr)
-		goto end;
-
-	seq_printf(seq, "processor id:            %d\n"
-		   "acpi id:                 %d\n"
-		   "bus mastering control:   %s\n"
-		   "power management:        %s\n"
-		   "throttling control:      %s\n"
-		   "limit interface:         %s\n",
-		   pr->id,
-		   pr->acpi_id,
-		   pr->flags.bm_control ? "yes" : "no",
-		   pr->flags.power ? "yes" : "no",
-		   pr->flags.throttling ? "yes" : "no",
-		   pr->flags.limit ? "yes" : "no");
-
-      end:
-	return 0;
-}
-
-static int acpi_processor_info_open_fs(struct inode *inode, struct file *file)
-{
-	return single_open(file, acpi_processor_info_seq_show,
-			   PDE(inode)->data);
-}
-
-static int __cpuinit acpi_processor_add_fs(struct acpi_device *device)
-{
-	struct proc_dir_entry *entry = NULL;
-
-
-	if (!acpi_device_dir(device)) {
-		acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
-						     acpi_processor_dir);
-		if (!acpi_device_dir(device))
-			return -ENODEV;
-	}
-
-	/* 'info' [R] */
-	entry = proc_create_data(ACPI_PROCESSOR_FILE_INFO,
-				 S_IRUGO, acpi_device_dir(device),
-				 &acpi_processor_info_fops,
-				 acpi_driver_data(device));
-	if (!entry)
-		return -EIO;
-
-	/* 'throttling' [R/W] */
-	entry = proc_create_data(ACPI_PROCESSOR_FILE_THROTTLING,
-				 S_IFREG | S_IRUGO | S_IWUSR,
-				 acpi_device_dir(device),
-				 &acpi_processor_throttling_fops,
-				 acpi_driver_data(device));
-	if (!entry)
-		return -EIO;
-
-	/* 'limit' [R/W] */
-	entry = proc_create_data(ACPI_PROCESSOR_FILE_LIMIT,
-				 S_IFREG | S_IRUGO | S_IWUSR,
-				 acpi_device_dir(device),
-				 &acpi_processor_limit_fops,
-				 acpi_driver_data(device));
-	if (!entry)
-		return -EIO;
-	return 0;
-}
-static int acpi_processor_remove_fs(struct acpi_device *device)
-{
-
-	if (acpi_device_dir(device)) {
-		remove_proc_entry(ACPI_PROCESSOR_FILE_INFO,
-				  acpi_device_dir(device));
-		remove_proc_entry(ACPI_PROCESSOR_FILE_THROTTLING,
-				  acpi_device_dir(device));
-		remove_proc_entry(ACPI_PROCESSOR_FILE_LIMIT,
-				  acpi_device_dir(device));
-		remove_proc_entry(acpi_device_bid(device), acpi_processor_dir);
-		acpi_device_dir(device) = NULL;
-	}
-
-	return 0;
-}
-#else
-static inline int acpi_processor_add_fs(struct acpi_device *device)
-{
-	return 0;
-}
-static inline int acpi_processor_remove_fs(struct acpi_device *device)
-{
-	return 0;
-}
-#endif
-
-/* Use the acpiid in MADT to map cpus in case of SMP */
-
-#ifndef CONFIG_SMP
-static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; }
-#else
-
-static struct acpi_table_madt *madt;
+static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
+	{
+	set_no_mwait, "IFL91 board", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
+	DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"),
+	DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"),
+	DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL},
+	{
+	set_no_mwait, "Extensa 5220", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
+	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
+	{},
+};
 
+#ifdef CONFIG_SMP
 static int map_lapic_id(struct acpi_subtable_header *entry,
 		 u32 acpi_id, int *apic_id)
 {
 	struct acpi_madt_local_apic *lapic =
 		(struct acpi_madt_local_apic *)entry;
-	if ((lapic->lapic_flags & ACPI_MADT_ENABLED) &&
-	    lapic->processor_id == acpi_id) {
-		*apic_id = lapic->id;
-		return 1;
-	}
-	return 0;
+
+	if (!(lapic->lapic_flags & ACPI_MADT_ENABLED))
+		return 0;
+
+	if (lapic->processor_id != acpi_id)
+		return 0;
+
+	*apic_id = lapic->id;
+	return 1;
 }
 
 static int map_x2apic_id(struct acpi_subtable_header *entry,
@@ -385,22 +64,16 @@ static int map_x2apic_id(struct acpi_subtable_header *entry,
 {
 	struct acpi_madt_local_x2apic *apic =
 		(struct acpi_madt_local_x2apic *)entry;
-	u32 tmp = apic->local_apic_id;
 
-	/* Only check enabled APICs*/
 	if (!(apic->lapic_flags & ACPI_MADT_ENABLED))
 		return 0;
 
-	/* Device statement declaration type */
-	if (device_declaration) {
-		if (apic->uid == acpi_id)
-			goto found;
+	if (device_declaration && (apic->uid == acpi_id)) {
+		*apic_id = apic->local_apic_id;
+		return 1;
 	}
 
 	return 0;
-found:
-	*apic_id = tmp;
-	return 1;
 }
 
 static int map_lsapic_id(struct acpi_subtable_header *entry,
@@ -408,35 +81,34 @@ static int map_lsapic_id(struct acpi_subtable_header *entry,
 {
 	struct acpi_madt_local_sapic *lsapic =
 		(struct acpi_madt_local_sapic *)entry;
-	u32 tmp = (lsapic->id << 8) | lsapic->eid;
 
-	/* Only check enabled APICs*/
 	if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))
 		return 0;
 
-	/* Device statement declaration type */
 	if (device_declaration) {
-		if (entry->length < 16)
-			printk(KERN_ERR PREFIX
-			    "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n",
-			    tmp);
-		else if (lsapic->uid == acpi_id)
-			goto found;
-	/* Processor statement declaration type */
-	} else if (lsapic->processor_id == acpi_id)
-		goto found;
+		if ((entry->length < 16) || (lsapic->uid != acpi_id))
+			return 0;
+	} else if (lsapic->processor_id != acpi_id)
+		return 0;
 
-	return 0;
-found:
-	*apic_id = tmp;
+	*apic_id = (lsapic->id << 8) | lsapic->eid;
 	return 1;
 }
 
 static int map_madt_entry(int type, u32 acpi_id)
 {
 	unsigned long madt_end, entry;
+	static struct acpi_table_madt *madt;
+	static int read_madt;
 	int apic_id = -1;
 
+	if (!read_madt) {
+		if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
+					(struct acpi_table_header **)&madt)))
+			madt = NULL;
+		read_madt++;
+	}
+
 	if (!madt)
 		return apic_id;
 
@@ -496,7 +168,7 @@ exit:
 	return apic_id;
 }
 
-static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id)
+int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
 {
 	int i;
 	int apic_id = -1;
@@ -513,630 +185,170 @@ static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id)
 	}
 	return -1;
 }
+EXPORT_SYMBOL_GPL(acpi_get_cpuid);
 #endif
 
-/* --------------------------------------------------------------------------
-                                 Driver Interface
-   -------------------------------------------------------------------------- */
-
-static int acpi_processor_get_info(struct acpi_device *device)
+static bool processor_physically_present(acpi_handle handle)
 {
-	acpi_status status = 0;
+	int cpuid, type;
+	u32 acpi_id;
+	acpi_status status;
+	acpi_object_type acpi_type;
+	unsigned long long tmp;
 	union acpi_object object = { 0 };
 	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
-	struct acpi_processor *pr;
-	int cpu_index, device_declaration = 0;
-	static int cpu0_initialized;
-
-	pr = acpi_driver_data(device);
-	if (!pr)
-		return -EINVAL;
-
-	if (num_online_cpus() > 1)
-		errata.smp = TRUE;
-
-	acpi_processor_errata(pr);
-
-	/*
-	 * Check to see if we have bus mastering arbitration control.  This
-	 * is required for proper C3 usage (to maintain cache coherency).
-	 */
-	if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
-		pr->flags.bm_control = 1;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Bus mastering arbitration control present\n"));
-	} else
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "No bus mastering arbitration control\n"));
-
-	if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
-		/* Declared with "Processor" statement; match ProcessorID */
-		status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
-		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX "Evaluating processor object\n");
-			return -ENODEV;
-		}
-
-		/*
-		 * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
-		 *      >>> 'acpi_get_processor_id(acpi_id, &id)' in
-		 *      arch/xxx/acpi.c
-		 */
-		pr->acpi_id = object.processor.proc_id;
-	} else {
-		/*
-		 * Declared with "Device" statement; match _UID.
-		 * Note that we don't handle string _UIDs yet.
-		 */
-		unsigned long long value;
-		status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
-						NULL, &value);
-		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX
-			    "Evaluating processor _UID [%#x]\n", status);
-			return -ENODEV;
-		}
-		device_declaration = 1;
-		pr->acpi_id = value;
-	}
-	cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id);
-
-	/* Handle UP system running SMP kernel, with no LAPIC in MADT */
-	if (!cpu0_initialized && (cpu_index == -1) &&
-	    (num_online_cpus() == 1)) {
-		cpu_index = 0;
-	}
-
-	cpu0_initialized = 1;
-
-	pr->id = cpu_index;
-
-	/*
-	 *  Extra Processor objects may be enumerated on MP systems with
-	 *  less than the max # of CPUs. They should be ignored _iff
-	 *  they are physically not present.
-	 */
-	if (pr->id == -1) {
-		if (ACPI_FAILURE
-		    (acpi_processor_hotadd_init(pr->handle, &pr->id))) {
-			return -ENODEV;
-		}
-	}
-	/*
-	 * On some boxes several processors use the same processor bus id.
-	 * But they are located in different scope. For example:
-	 * \_SB.SCK0.CPU0
-	 * \_SB.SCK1.CPU0
-	 * Rename the processor device bus id. And the new bus id will be
-	 * generated as the following format:
-	 * CPU+CPU ID.
-	 */
-	sprintf(acpi_device_bid(device), "CPU%X", pr->id);
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
-			  pr->acpi_id));
-
-	if (!object.processor.pblk_address)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
-	else if (object.processor.pblk_length != 6)
-		printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n",
-			    object.processor.pblk_length);
-	else {
-		pr->throttling.address = object.processor.pblk_address;
-		pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset;
-		pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
-
-		pr->pblk = object.processor.pblk_address;
-
-		/*
-		 * We don't care about error returns - we just try to mark
-		 * these reserved so that nobody else is confused into thinking
-		 * that this region might be unused..
-		 *
-		 * (In particular, allocating the IO range for Cardbus)
-		 */
-		request_region(pr->throttling.address, 6, "ACPI CPU throttle");
-	}
-
-	/*
-	 * If ACPI describes a slot number for this CPU, we can use it
-	 * ensure we get the right value in the "physical id" field
-	 * of /proc/cpuinfo
-	 */
-	status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer);
-	if (ACPI_SUCCESS(status))
-		arch_fix_phys_package_id(pr->id, object.integer.value);
-
-	return 0;
-}
-
-static DEFINE_PER_CPU(void *, processor_device_array);
-
-static void acpi_processor_notify(struct acpi_device *device, u32 event)
-{
-	struct acpi_processor *pr = acpi_driver_data(device);
-	int saved;
-
-	if (!pr)
-		return;
 
-	switch (event) {
-	case ACPI_PROCESSOR_NOTIFY_PERFORMANCE:
-		saved = pr->performance_platform_limit;
-		acpi_processor_ppc_has_changed(pr, 1);
-		if (saved == pr->performance_platform_limit)
-			break;
-		acpi_bus_generate_proc_event(device, event,
-					pr->performance_platform_limit);
-		acpi_bus_generate_netlink_event(device->pnp.device_class,
-						  dev_name(&device->dev), event,
-						  pr->performance_platform_limit);
+	status = acpi_get_type(handle, &acpi_type);
+	if (ACPI_FAILURE(status))
+		return false;
+
+	switch (acpi_type) {
+	case ACPI_TYPE_PROCESSOR:
+		status = acpi_evaluate_object(handle, NULL, NULL, &buffer);
+		if (ACPI_FAILURE(status))
+			return false;
+		acpi_id = object.processor.proc_id;
 		break;
-	case ACPI_PROCESSOR_NOTIFY_POWER:
-		acpi_processor_cst_has_changed(pr);
-		acpi_bus_generate_proc_event(device, event, 0);
-		acpi_bus_generate_netlink_event(device->pnp.device_class,
-						  dev_name(&device->dev), event, 0);
+	case ACPI_TYPE_DEVICE:
+		status = acpi_evaluate_integer(handle, "_UID", NULL, &tmp);
+		if (ACPI_FAILURE(status))
+			return false;
+		acpi_id = tmp;
 		break;
-	case ACPI_PROCESSOR_NOTIFY_THROTTLING:
-		acpi_processor_tstate_has_changed(pr);
-		acpi_bus_generate_proc_event(device, event, 0);
-		acpi_bus_generate_netlink_event(device->pnp.device_class,
-						  dev_name(&device->dev), event, 0);
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
-		break;
+		return false;
 	}
 
-	return;
-}
+	type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0;
+	cpuid = acpi_get_cpuid(handle, type, acpi_id);
 
-static int acpi_cpu_soft_notify(struct notifier_block *nfb,
-		unsigned long action, void *hcpu)
-{
-	unsigned int cpu = (unsigned long)hcpu;
-	struct acpi_processor *pr = per_cpu(processors, cpu);
+	if (cpuid == -1)
+		return false;
 
-	if (action == CPU_ONLINE && pr) {
-		acpi_processor_ppc_has_changed(pr, 0);
-		acpi_processor_cst_has_changed(pr);
-		acpi_processor_tstate_has_changed(pr);
-	}
-	return NOTIFY_OK;
+	return true;
 }
 
-static struct notifier_block acpi_cpu_notifier =
+static void acpi_set_pdc_bits(u32 *buf)
 {
-	    .notifier_call = acpi_cpu_soft_notify,
-};
-
-static int __cpuinit acpi_processor_add(struct acpi_device *device)
-{
-	struct acpi_processor *pr = NULL;
-	int result = 0;
-	struct sys_device *sysdev;
-
-	pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
-	if (!pr)
-		return -ENOMEM;
-
-	if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
-		kfree(pr);
-		return -ENOMEM;
-	}
-
-	pr->handle = device->handle;
-	strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
-	strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
-	device->driver_data = pr;
-
-	result = acpi_processor_get_info(device);
-	if (result) {
-		/* Processor is physically not present */
-		return 0;
-	}
-
-	BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
-
-	/*
-	 * Buggy BIOS check
-	 * ACPI id of processors can be reported wrongly by the BIOS.
-	 * Don't trust it blindly
-	 */
-	if (per_cpu(processor_device_array, pr->id) != NULL &&
-	    per_cpu(processor_device_array, pr->id) != device) {
-		printk(KERN_WARNING "BIOS reported wrong ACPI id "
-			"for the processor\n");
-		result = -ENODEV;
-		goto err_free_cpumask;
-	}
-	per_cpu(processor_device_array, pr->id) = device;
+	buf[0] = ACPI_PDC_REVISION_ID;
+	buf[1] = 1;
 
-	per_cpu(processors, pr->id) = pr;
+	/* Enable coordination with firmware's _TSD info */
+	buf[2] = ACPI_PDC_SMP_T_SWCOORD;
 
-	result = acpi_processor_add_fs(device);
-	if (result)
-		goto err_free_cpumask;
-
-	sysdev = get_cpu_sysdev(pr->id);
-	if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev")) {
-		result = -EFAULT;
-		goto err_remove_fs;
-	}
-
-	/* _PDC call should be done before doing anything else (if reqd.). */
-	acpi_processor_set_pdc(pr->handle);
-
-#ifdef CONFIG_CPU_FREQ
-	acpi_processor_ppc_has_changed(pr, 0);
-#endif
-	acpi_processor_get_throttling_info(pr);
-	acpi_processor_get_limit_info(pr);
-
-
-	acpi_processor_power_init(pr, device);
-
-	pr->cdev = thermal_cooling_device_register("Processor", device,
-						&processor_cooling_ops);
-	if (IS_ERR(pr->cdev)) {
-		result = PTR_ERR(pr->cdev);
-		goto err_power_exit;
-	}
-
-	dev_dbg(&device->dev, "registered as cooling_device%d\n",
-		 pr->cdev->id);
-
-	result = sysfs_create_link(&device->dev.kobj,
-				   &pr->cdev->device.kobj,
-				   "thermal_cooling");
-	if (result) {
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
-		goto err_thermal_unregister;
-	}
-	result = sysfs_create_link(&pr->cdev->device.kobj,
-				   &device->dev.kobj,
-				   "device");
-	if (result) {
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
-		goto err_remove_sysfs;
-	}
-
-	return 0;
-
-err_remove_sysfs:
-	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
-err_thermal_unregister:
-	thermal_cooling_device_unregister(pr->cdev);
-err_power_exit:
-	acpi_processor_power_exit(pr, device);
-err_remove_fs:
-	acpi_processor_remove_fs(device);
-err_free_cpumask:
-	free_cpumask_var(pr->throttling.shared_cpu_map);
-
-	return result;
+	/* Twiddle arch-specific bits needed for _PDC */
+	arch_acpi_set_pdc_bits(buf);
 }
 
-static int acpi_processor_remove(struct acpi_device *device, int type)
+static struct acpi_object_list *acpi_processor_alloc_pdc(void)
 {
-	struct acpi_processor *pr = NULL;
-
-
-	if (!device || !acpi_driver_data(device))
-		return -EINVAL;
-
-	pr = acpi_driver_data(device);
-
-	if (pr->id >= nr_cpu_ids)
-		goto free;
+	struct acpi_object_list *obj_list;
+	union acpi_object *obj;
+	u32 *buf;
 
-	if (type == ACPI_BUS_REMOVAL_EJECT) {
-		if (acpi_processor_handle_eject(pr))
-			return -EINVAL;
+	/* allocate and initialize pdc. It will be used later. */
+	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+	if (!obj_list) {
+		printk(KERN_ERR "Memory allocation error\n");
+		return NULL;
 	}
 
-	acpi_processor_power_exit(pr, device);
-
-	sysfs_remove_link(&device->dev.kobj, "sysdev");
-
-	acpi_processor_remove_fs(device);
-
-	if (pr->cdev) {
-		sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
-		sysfs_remove_link(&pr->cdev->device.kobj, "device");
-		thermal_cooling_device_unregister(pr->cdev);
-		pr->cdev = NULL;
+	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+	if (!obj) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj_list);
+		return NULL;
 	}
 
-	per_cpu(processors, pr->id) = NULL;
-	per_cpu(processor_device_array, pr->id) = NULL;
-
-free:
-	free_cpumask_var(pr->throttling.shared_cpu_map);
-	kfree(pr);
-
-	return 0;
-}
-
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-/****************************************************************************
- * 	Acpi processor hotplug support 				       	    *
- ****************************************************************************/
-
-static int is_processor_present(acpi_handle handle)
-{
-	acpi_status status;
-	unsigned long long sta = 0;
-
-
-	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
-
-	if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT))
-		return 1;
-
-	/*
-	 * _STA is mandatory for a processor that supports hot plug
-	 */
-	if (status == AE_NOT_FOUND)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				"Processor does not support hot plug\n"));
-	else
-		ACPI_EXCEPTION((AE_INFO, status,
-				"Processor Device is not present"));
-	return 0;
-}
-
-static
-int acpi_processor_device_add(acpi_handle handle, struct acpi_device **device)
-{
-	acpi_handle phandle;
-	struct acpi_device *pdev;
-
-
-	if (acpi_get_parent(handle, &phandle)) {
-		return -ENODEV;
+	buf = kmalloc(12, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj);
+		kfree(obj_list);
+		return NULL;
 	}
 
-	if (acpi_bus_get_device(phandle, &pdev)) {
-		return -ENODEV;
-	}
+	acpi_set_pdc_bits(buf);
 
-	if (acpi_bus_add(device, pdev, handle, ACPI_BUS_TYPE_PROCESSOR)) {
-		return -ENODEV;
-	}
+	obj->type = ACPI_TYPE_BUFFER;
+	obj->buffer.length = 12;
+	obj->buffer.pointer = (u8 *) buf;
+	obj_list->count = 1;
+	obj_list->pointer = obj;
 
-	return 0;
+	return obj_list;
 }
 
-static void __ref acpi_processor_hotplug_notify(acpi_handle handle,
-						u32 event, void *data)
+/*
+ * _PDC is required for a BIOS-OS handshake for most of the newer
+ * ACPI processor features.
+ */
+static int
+acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in)
 {
-	struct acpi_processor *pr;
-	struct acpi_device *device = NULL;
-	int result;
-
+	acpi_status status = AE_OK;
 
-	switch (event) {
-	case ACPI_NOTIFY_BUS_CHECK:
-	case ACPI_NOTIFY_DEVICE_CHECK:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-		"Processor driver received %s event\n",
-		       (event == ACPI_NOTIFY_BUS_CHECK) ?
-		       "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"));
-
-		if (!is_processor_present(handle))
-			break;
+	if (idle_nomwait) {
+		/*
+		 * If mwait is disabled for CPU C-states, the C2C3_FFH access
+		 * mode will be disabled in the parameter of _PDC object.
+		 * Of course C1_FFH access mode will also be disabled.
+		 */
+		union acpi_object *obj;
+		u32 *buffer = NULL;
 
-		if (acpi_bus_get_device(handle, &device)) {
-			result = acpi_processor_device_add(handle, &device);
-			if (result)
-				printk(KERN_ERR PREFIX
-					    "Unable to add the device\n");
-			break;
-		}
-		break;
-	case ACPI_NOTIFY_EJECT_REQUEST:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "received ACPI_NOTIFY_EJECT_REQUEST\n"));
+		obj = pdc_in->pointer;
+		buffer = (u32 *)(obj->buffer.pointer);
+		buffer[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH);
 
-		if (acpi_bus_get_device(handle, &device)) {
-			printk(KERN_ERR PREFIX
-				    "Device don't exist, dropping EJECT\n");
-			break;
-		}
-		pr = acpi_driver_data(device);
-		if (!pr) {
-			printk(KERN_ERR PREFIX
-				    "Driver data is NULL, dropping EJECT\n");
-			return;
-		}
-		break;
-	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
-		break;
 	}
+	status = acpi_evaluate_object(handle, "_PDC", pdc_in, NULL);
 
-	return;
-}
-
-static acpi_status
-processor_walk_namespace_cb(acpi_handle handle,
-			    u32 lvl, void *context, void **rv)
-{
-	acpi_status status;
-	int *action = context;
-	acpi_object_type type = 0;
-
-	status = acpi_get_type(handle, &type);
 	if (ACPI_FAILURE(status))
-		return (AE_OK);
-
-	if (type != ACPI_TYPE_PROCESSOR)
-		return (AE_OK);
-
-	switch (*action) {
-	case INSTALL_NOTIFY_HANDLER:
-		acpi_install_notify_handler(handle,
-					    ACPI_SYSTEM_NOTIFY,
-					    acpi_processor_hotplug_notify,
-					    NULL);
-		break;
-	case UNINSTALL_NOTIFY_HANDLER:
-		acpi_remove_notify_handler(handle,
-					   ACPI_SYSTEM_NOTIFY,
-					   acpi_processor_hotplug_notify);
-		break;
-	default:
-		break;
-	}
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		    "Could not evaluate _PDC, using legacy perf. control.\n"));
 
-	return (AE_OK);
+	return status;
 }
 
-static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
+void acpi_processor_set_pdc(acpi_handle handle)
 {
+	struct acpi_object_list *obj_list;
 
-	if (!is_processor_present(handle)) {
-		return AE_ERROR;
-	}
+	if (arch_has_acpi_pdc() == false)
+		return;
 
-	if (acpi_map_lsapic(handle, p_cpu))
-		return AE_ERROR;
+	obj_list = acpi_processor_alloc_pdc();
+	if (!obj_list)
+		return;
 
-	if (arch_register_cpu(*p_cpu)) {
-		acpi_unmap_lsapic(*p_cpu);
-		return AE_ERROR;
-	}
+	acpi_processor_eval_pdc(handle, obj_list);
 
-	return AE_OK;
+	kfree(obj_list->pointer->buffer.pointer);
+	kfree(obj_list->pointer);
+	kfree(obj_list);
 }
+EXPORT_SYMBOL_GPL(acpi_processor_set_pdc);
 
-static int acpi_processor_handle_eject(struct acpi_processor *pr)
+static acpi_status
+early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
-	if (cpu_online(pr->id))
-		cpu_down(pr->id);
+	if (processor_physically_present(handle) == false)
+		return AE_OK;
 
-	arch_unregister_cpu(pr->id);
-	acpi_unmap_lsapic(pr->id);
-	return (0);
-}
-#else
-static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
-{
-	return AE_ERROR;
-}
-static int acpi_processor_handle_eject(struct acpi_processor *pr)
-{
-	return (-EINVAL);
+	acpi_processor_set_pdc(handle);
+	return AE_OK;
 }
-#endif
 
-static
-void acpi_processor_install_hotplug_notify(void)
+void __init acpi_early_processor_set_pdc(void)
 {
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-	int action = INSTALL_NOTIFY_HANDLER;
-	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
-			    ACPI_ROOT_OBJECT,
-			    ACPI_UINT32_MAX,
-			    processor_walk_namespace_cb, NULL, &action, NULL);
-#endif
-	register_hotcpu_notifier(&acpi_cpu_notifier);
-}
+	/*
+	 * Check whether the system is DMI table. If yes, OSPM
+	 * should not use mwait for CPU-states.
+	 */
+	dmi_check_system(processor_idle_dmi_table);
 
-static
-void acpi_processor_uninstall_hotplug_notify(void)
-{
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-	int action = UNINSTALL_NOTIFY_HANDLER;
-	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
-			    ACPI_ROOT_OBJECT,
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
 			    ACPI_UINT32_MAX,
-			    processor_walk_namespace_cb, NULL, &action, NULL);
-#endif
-	unregister_hotcpu_notifier(&acpi_cpu_notifier);
+			    early_init_pdc, NULL, NULL, NULL);
 }
-
-/*
- * We keep the driver loaded even when ACPI is not running.
- * This is needed for the powernow-k8 driver, that works even without
- * ACPI, but needs symbols from this driver
- */
-
-static int __init acpi_processor_init(void)
-{
-	int result = 0;
-
-	if (acpi_disabled)
-		return 0;
-
-	memset(&errata, 0, sizeof(errata));
-
-#ifdef CONFIG_SMP
-	if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
-				(struct acpi_table_header **)&madt)))
-		madt = NULL;
-#endif
-#ifdef CONFIG_ACPI_PROCFS
-	acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
-	if (!acpi_processor_dir)
-		return -ENOMEM;
-#endif
-	result = cpuidle_register_driver(&acpi_idle_driver);
-	if (result < 0)
-		goto out_proc;
-
-	result = acpi_bus_register_driver(&acpi_processor_driver);
-	if (result < 0)
-		goto out_cpuidle;
-
-	acpi_processor_install_hotplug_notify();
-
-	acpi_thermal_cpufreq_init();
-
-	acpi_processor_ppc_init();
-
-	acpi_processor_throttling_init();
-
-	return 0;
-
-out_cpuidle:
-	cpuidle_unregister_driver(&acpi_idle_driver);
-
-out_proc:
-#ifdef CONFIG_ACPI_PROCFS
-	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
-#endif
-
-	return result;
-}
-
-static void __exit acpi_processor_exit(void)
-{
-	if (acpi_disabled)
-		return;
-
-	acpi_processor_ppc_exit();
-
-	acpi_thermal_cpufreq_exit();
-
-	acpi_processor_uninstall_hotplug_notify();
-
-	acpi_bus_unregister_driver(&acpi_processor_driver);
-
-	cpuidle_unregister_driver(&acpi_idle_driver);
-
-#ifdef CONFIG_ACPI_PROCFS
-	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
-#endif
-
-	return;
-}
-
-module_init(acpi_processor_init);
-module_exit(acpi_processor_exit);
-
-EXPORT_SYMBOL(acpi_processor_set_thermal_limit);
-
-MODULE_ALIAS("processor");
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
new file mode 100644
index 000000000000..b5658cdce27f
--- /dev/null
+++ b/drivers/acpi/processor_driver.c
@@ -0,0 +1,978 @@
+/*
+ * acpi_processor.c - ACPI Processor Driver ($Revision: 71 $)
+ *
+ *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2004       Dominik Brodowski <linux@brodo.de>
+ *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+ *  			- Added processor hotplug support
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *  TBD:
+ *	1. Make # power states dynamic.
+ *	2. Support duty_cycle values that span bit 4.
+ *	3. Optimize by having scheduler determine business instead of
+ *	   having us try to calculate it here.
+ *	4. Need C1 timing -- must modify kernel (IRQ handler) to get this.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/dmi.h>
+#include <linux/moduleparam.h>
+#include <linux/cpuidle.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/cpu.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/smp.h>
+#include <asm/acpi.h>
+
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/processor.h>
+
+#define PREFIX "ACPI: "
+
+#define ACPI_PROCESSOR_CLASS		"processor"
+#define ACPI_PROCESSOR_DEVICE_NAME	"Processor"
+#define ACPI_PROCESSOR_FILE_INFO	"info"
+#define ACPI_PROCESSOR_FILE_THROTTLING	"throttling"
+#define ACPI_PROCESSOR_FILE_LIMIT	"limit"
+#define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80
+#define ACPI_PROCESSOR_NOTIFY_POWER	0x81
+#define ACPI_PROCESSOR_NOTIFY_THROTTLING	0x82
+
+#define ACPI_PROCESSOR_LIMIT_USER	0
+#define ACPI_PROCESSOR_LIMIT_THERMAL	1
+
+#define _COMPONENT		ACPI_PROCESSOR_COMPONENT
+ACPI_MODULE_NAME("processor_driver");
+
+MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_DESCRIPTION("ACPI Processor Driver");
+MODULE_LICENSE("GPL");
+
+static int acpi_processor_add(struct acpi_device *device);
+static int acpi_processor_remove(struct acpi_device *device, int type);
+#ifdef CONFIG_ACPI_PROCFS
+static int acpi_processor_info_open_fs(struct inode *inode, struct file *file);
+#endif
+static void acpi_processor_notify(struct acpi_device *device, u32 event);
+static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
+static int acpi_processor_handle_eject(struct acpi_processor *pr);
+
+
+static const struct acpi_device_id processor_device_ids[] = {
+	{ACPI_PROCESSOR_OBJECT_HID, 0},
+	{"ACPI0007", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, processor_device_ids);
+
+static struct acpi_driver acpi_processor_driver = {
+	.name = "processor",
+	.class = ACPI_PROCESSOR_CLASS,
+	.ids = processor_device_ids,
+	.ops = {
+		.add = acpi_processor_add,
+		.remove = acpi_processor_remove,
+		.suspend = acpi_processor_suspend,
+		.resume = acpi_processor_resume,
+		.notify = acpi_processor_notify,
+		},
+};
+
+#define INSTALL_NOTIFY_HANDLER		1
+#define UNINSTALL_NOTIFY_HANDLER	2
+#ifdef CONFIG_ACPI_PROCFS
+static const struct file_operations acpi_processor_info_fops = {
+	.owner = THIS_MODULE,
+	.open = acpi_processor_info_open_fs,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+#endif
+
+DEFINE_PER_CPU(struct acpi_processor *, processors);
+EXPORT_PER_CPU_SYMBOL(processors);
+
+struct acpi_processor_errata errata __read_mostly;
+
+/* --------------------------------------------------------------------------
+                                Errata Handling
+   -------------------------------------------------------------------------- */
+
+static int acpi_processor_errata_piix4(struct pci_dev *dev)
+{
+	u8 value1 = 0;
+	u8 value2 = 0;
+
+
+	if (!dev)
+		return -EINVAL;
+
+	/*
+	 * Note that 'dev' references the PIIX4 ACPI Controller.
+	 */
+
+	switch (dev->revision) {
+	case 0:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
+		break;
+	case 1:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
+		break;
+	case 2:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
+		break;
+	case 3:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
+		break;
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
+		break;
+	}
+
+	switch (dev->revision) {
+
+	case 0:		/* PIIX4 A-step */
+	case 1:		/* PIIX4 B-step */
+		/*
+		 * See specification changes #13 ("Manual Throttle Duty Cycle")
+		 * and #14 ("Enabling and Disabling Manual Throttle"), plus
+		 * erratum #5 ("STPCLK# Deassertion Time") from the January
+		 * 2002 PIIX4 specification update.  Applies to only older
+		 * PIIX4 models.
+		 */
+		errata.piix4.throttle = 1;
+
+	case 2:		/* PIIX4E */
+	case 3:		/* PIIX4M */
+		/*
+		 * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA
+		 * Livelock") from the January 2002 PIIX4 specification update.
+		 * Applies to all PIIX4 models.
+		 */
+
+		/*
+		 * BM-IDE
+		 * ------
+		 * Find the PIIX4 IDE Controller and get the Bus Master IDE
+		 * Status register address.  We'll use this later to read
+		 * each IDE controller's DMA status to make sure we catch all
+		 * DMA activity.
+		 */
+		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+				     PCI_DEVICE_ID_INTEL_82371AB,
+				     PCI_ANY_ID, PCI_ANY_ID, NULL);
+		if (dev) {
+			errata.piix4.bmisx = pci_resource_start(dev, 4);
+			pci_dev_put(dev);
+		}
+
+		/*
+		 * Type-F DMA
+		 * ----------
+		 * Find the PIIX4 ISA Controller and read the Motherboard
+		 * DMA controller's status to see if Type-F (Fast) DMA mode
+		 * is enabled (bit 7) on either channel.  Note that we'll
+		 * disable C3 support if this is enabled, as some legacy
+		 * devices won't operate well if fast DMA is disabled.
+		 */
+		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+				     PCI_DEVICE_ID_INTEL_82371AB_0,
+				     PCI_ANY_ID, PCI_ANY_ID, NULL);
+		if (dev) {
+			pci_read_config_byte(dev, 0x76, &value1);
+			pci_read_config_byte(dev, 0x77, &value2);
+			if ((value1 & 0x80) || (value2 & 0x80))
+				errata.piix4.fdma = 1;
+			pci_dev_put(dev);
+		}
+
+		break;
+	}
+
+	if (errata.piix4.bmisx)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Bus master activity detection (BM-IDE) erratum enabled\n"));
+	if (errata.piix4.fdma)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Type-F DMA livelock erratum (C3 disabled)\n"));
+
+	return 0;
+}
+
+static int acpi_processor_errata(struct acpi_processor *pr)
+{
+	int result = 0;
+	struct pci_dev *dev = NULL;
+
+
+	if (!pr)
+		return -EINVAL;
+
+	/*
+	 * PIIX4
+	 */
+	dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			     PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID,
+			     PCI_ANY_ID, NULL);
+	if (dev) {
+		result = acpi_processor_errata_piix4(dev);
+		pci_dev_put(dev);
+	}
+
+	return result;
+}
+
+/* --------------------------------------------------------------------------
+                              FS Interface (/proc)
+   -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI_PROCFS
+static struct proc_dir_entry *acpi_processor_dir = NULL;
+
+static int acpi_processor_info_seq_show(struct seq_file *seq, void *offset)
+{
+	struct acpi_processor *pr = seq->private;
+
+
+	if (!pr)
+		goto end;
+
+	seq_printf(seq, "processor id:            %d\n"
+		   "acpi id:                 %d\n"
+		   "bus mastering control:   %s\n"
+		   "power management:        %s\n"
+		   "throttling control:      %s\n"
+		   "limit interface:         %s\n",
+		   pr->id,
+		   pr->acpi_id,
+		   pr->flags.bm_control ? "yes" : "no",
+		   pr->flags.power ? "yes" : "no",
+		   pr->flags.throttling ? "yes" : "no",
+		   pr->flags.limit ? "yes" : "no");
+
+      end:
+	return 0;
+}
+
+static int acpi_processor_info_open_fs(struct inode *inode, struct file *file)
+{
+	return single_open(file, acpi_processor_info_seq_show,
+			   PDE(inode)->data);
+}
+
+static int __cpuinit acpi_processor_add_fs(struct acpi_device *device)
+{
+	struct proc_dir_entry *entry = NULL;
+
+
+	if (!acpi_device_dir(device)) {
+		acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
+						     acpi_processor_dir);
+		if (!acpi_device_dir(device))
+			return -ENODEV;
+	}
+
+	/* 'info' [R] */
+	entry = proc_create_data(ACPI_PROCESSOR_FILE_INFO,
+				 S_IRUGO, acpi_device_dir(device),
+				 &acpi_processor_info_fops,
+				 acpi_driver_data(device));
+	if (!entry)
+		return -EIO;
+
+	/* 'throttling' [R/W] */
+	entry = proc_create_data(ACPI_PROCESSOR_FILE_THROTTLING,
+				 S_IFREG | S_IRUGO | S_IWUSR,
+				 acpi_device_dir(device),
+				 &acpi_processor_throttling_fops,
+				 acpi_driver_data(device));
+	if (!entry)
+		return -EIO;
+
+	/* 'limit' [R/W] */
+	entry = proc_create_data(ACPI_PROCESSOR_FILE_LIMIT,
+				 S_IFREG | S_IRUGO | S_IWUSR,
+				 acpi_device_dir(device),
+				 &acpi_processor_limit_fops,
+				 acpi_driver_data(device));
+	if (!entry)
+		return -EIO;
+	return 0;
+}
+static int acpi_processor_remove_fs(struct acpi_device *device)
+{
+
+	if (acpi_device_dir(device)) {
+		remove_proc_entry(ACPI_PROCESSOR_FILE_INFO,
+				  acpi_device_dir(device));
+		remove_proc_entry(ACPI_PROCESSOR_FILE_THROTTLING,
+				  acpi_device_dir(device));
+		remove_proc_entry(ACPI_PROCESSOR_FILE_LIMIT,
+				  acpi_device_dir(device));
+		remove_proc_entry(acpi_device_bid(device), acpi_processor_dir);
+		acpi_device_dir(device) = NULL;
+	}
+
+	return 0;
+}
+#else
+static inline int acpi_processor_add_fs(struct acpi_device *device)
+{
+	return 0;
+}
+static inline int acpi_processor_remove_fs(struct acpi_device *device)
+{
+	return 0;
+}
+#endif
+
+/* --------------------------------------------------------------------------
+                                 Driver Interface
+   -------------------------------------------------------------------------- */
+
+static int acpi_processor_get_info(struct acpi_device *device)
+{
+	acpi_status status = 0;
+	union acpi_object object = { 0 };
+	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
+	struct acpi_processor *pr;
+	int cpu_index, device_declaration = 0;
+	static int cpu0_initialized;
+
+	pr = acpi_driver_data(device);
+	if (!pr)
+		return -EINVAL;
+
+	if (num_online_cpus() > 1)
+		errata.smp = TRUE;
+
+	acpi_processor_errata(pr);
+
+	/*
+	 * Check to see if we have bus mastering arbitration control.  This
+	 * is required for proper C3 usage (to maintain cache coherency).
+	 */
+	if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
+		pr->flags.bm_control = 1;
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Bus mastering arbitration control present\n"));
+	} else
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "No bus mastering arbitration control\n"));
+
+	if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
+		/* Declared with "Processor" statement; match ProcessorID */
+		status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
+		if (ACPI_FAILURE(status)) {
+			printk(KERN_ERR PREFIX "Evaluating processor object\n");
+			return -ENODEV;
+		}
+
+		/*
+		 * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
+		 *      >>> 'acpi_get_processor_id(acpi_id, &id)' in
+		 *      arch/xxx/acpi.c
+		 */
+		pr->acpi_id = object.processor.proc_id;
+	} else {
+		/*
+		 * Declared with "Device" statement; match _UID.
+		 * Note that we don't handle string _UIDs yet.
+		 */
+		unsigned long long value;
+		status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
+						NULL, &value);
+		if (ACPI_FAILURE(status)) {
+			printk(KERN_ERR PREFIX
+			    "Evaluating processor _UID [%#x]\n", status);
+			return -ENODEV;
+		}
+		device_declaration = 1;
+		pr->acpi_id = value;
+	}
+	cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id);
+
+	/* Handle UP system running SMP kernel, with no LAPIC in MADT */
+	if (!cpu0_initialized && (cpu_index == -1) &&
+	    (num_online_cpus() == 1)) {
+		cpu_index = 0;
+	}
+
+	cpu0_initialized = 1;
+
+	pr->id = cpu_index;
+
+	/*
+	 *  Extra Processor objects may be enumerated on MP systems with
+	 *  less than the max # of CPUs. They should be ignored _iff
+	 *  they are physically not present.
+	 */
+	if (pr->id == -1) {
+		if (ACPI_FAILURE
+		    (acpi_processor_hotadd_init(pr->handle, &pr->id))) {
+			return -ENODEV;
+		}
+	}
+	/*
+	 * On some boxes several processors use the same processor bus id.
+	 * But they are located in different scope. For example:
+	 * \_SB.SCK0.CPU0
+	 * \_SB.SCK1.CPU0
+	 * Rename the processor device bus id. And the new bus id will be
+	 * generated as the following format:
+	 * CPU+CPU ID.
+	 */
+	sprintf(acpi_device_bid(device), "CPU%X", pr->id);
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
+			  pr->acpi_id));
+
+	if (!object.processor.pblk_address)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
+	else if (object.processor.pblk_length != 6)
+		printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n",
+			    object.processor.pblk_length);
+	else {
+		pr->throttling.address = object.processor.pblk_address;
+		pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset;
+		pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
+
+		pr->pblk = object.processor.pblk_address;
+
+		/*
+		 * We don't care about error returns - we just try to mark
+		 * these reserved so that nobody else is confused into thinking
+		 * that this region might be unused..
+		 *
+		 * (In particular, allocating the IO range for Cardbus)
+		 */
+		request_region(pr->throttling.address, 6, "ACPI CPU throttle");
+	}
+
+	/*
+	 * If ACPI describes a slot number for this CPU, we can use it
+	 * ensure we get the right value in the "physical id" field
+	 * of /proc/cpuinfo
+	 */
+	status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer);
+	if (ACPI_SUCCESS(status))
+		arch_fix_phys_package_id(pr->id, object.integer.value);
+
+	return 0;
+}
+
+static DEFINE_PER_CPU(void *, processor_device_array);
+
+static void acpi_processor_notify(struct acpi_device *device, u32 event)
+{
+	struct acpi_processor *pr = acpi_driver_data(device);
+	int saved;
+
+	if (!pr)
+		return;
+
+	switch (event) {
+	case ACPI_PROCESSOR_NOTIFY_PERFORMANCE:
+		saved = pr->performance_platform_limit;
+		acpi_processor_ppc_has_changed(pr, 1);
+		if (saved == pr->performance_platform_limit)
+			break;
+		acpi_bus_generate_proc_event(device, event,
+					pr->performance_platform_limit);
+		acpi_bus_generate_netlink_event(device->pnp.device_class,
+						  dev_name(&device->dev), event,
+						  pr->performance_platform_limit);
+		break;
+	case ACPI_PROCESSOR_NOTIFY_POWER:
+		acpi_processor_cst_has_changed(pr);
+		acpi_bus_generate_proc_event(device, event, 0);
+		acpi_bus_generate_netlink_event(device->pnp.device_class,
+						  dev_name(&device->dev), event, 0);
+		break;
+	case ACPI_PROCESSOR_NOTIFY_THROTTLING:
+		acpi_processor_tstate_has_changed(pr);
+		acpi_bus_generate_proc_event(device, event, 0);
+		acpi_bus_generate_netlink_event(device->pnp.device_class,
+						  dev_name(&device->dev), event, 0);
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Unsupported event [0x%x]\n", event));
+		break;
+	}
+
+	return;
+}
+
+static int acpi_cpu_soft_notify(struct notifier_block *nfb,
+		unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct acpi_processor *pr = per_cpu(processors, cpu);
+
+	if (action == CPU_ONLINE && pr) {
+		acpi_processor_ppc_has_changed(pr, 0);
+		acpi_processor_cst_has_changed(pr);
+		acpi_processor_tstate_has_changed(pr);
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block acpi_cpu_notifier =
+{
+	    .notifier_call = acpi_cpu_soft_notify,
+};
+
+static int __cpuinit acpi_processor_add(struct acpi_device *device)
+{
+	struct acpi_processor *pr = NULL;
+	int result = 0;
+	struct sys_device *sysdev;
+
+	pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
+	if (!pr)
+		return -ENOMEM;
+
+	if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
+		kfree(pr);
+		return -ENOMEM;
+	}
+
+	pr->handle = device->handle;
+	strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
+	device->driver_data = pr;
+
+	result = acpi_processor_get_info(device);
+	if (result) {
+		/* Processor is physically not present */
+		return 0;
+	}
+
+	BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
+
+	/*
+	 * Buggy BIOS check
+	 * ACPI id of processors can be reported wrongly by the BIOS.
+	 * Don't trust it blindly
+	 */
+	if (per_cpu(processor_device_array, pr->id) != NULL &&
+	    per_cpu(processor_device_array, pr->id) != device) {
+		printk(KERN_WARNING "BIOS reported wrong ACPI id "
+			"for the processor\n");
+		result = -ENODEV;
+		goto err_free_cpumask;
+	}
+	per_cpu(processor_device_array, pr->id) = device;
+
+	per_cpu(processors, pr->id) = pr;
+
+	result = acpi_processor_add_fs(device);
+	if (result)
+		goto err_free_cpumask;
+
+	sysdev = get_cpu_sysdev(pr->id);
+	if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev")) {
+		result = -EFAULT;
+		goto err_remove_fs;
+	}
+
+#ifdef CONFIG_CPU_FREQ
+	acpi_processor_ppc_has_changed(pr, 0);
+#endif
+	acpi_processor_get_throttling_info(pr);
+	acpi_processor_get_limit_info(pr);
+
+
+	acpi_processor_power_init(pr, device);
+
+	pr->cdev = thermal_cooling_device_register("Processor", device,
+						&processor_cooling_ops);
+	if (IS_ERR(pr->cdev)) {
+		result = PTR_ERR(pr->cdev);
+		goto err_power_exit;
+	}
+
+	dev_dbg(&device->dev, "registered as cooling_device%d\n",
+		 pr->cdev->id);
+
+	result = sysfs_create_link(&device->dev.kobj,
+				   &pr->cdev->device.kobj,
+				   "thermal_cooling");
+	if (result) {
+		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		goto err_thermal_unregister;
+	}
+	result = sysfs_create_link(&pr->cdev->device.kobj,
+				   &device->dev.kobj,
+				   "device");
+	if (result) {
+		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		goto err_remove_sysfs;
+	}
+
+	return 0;
+
+err_remove_sysfs:
+	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+err_thermal_unregister:
+	thermal_cooling_device_unregister(pr->cdev);
+err_power_exit:
+	acpi_processor_power_exit(pr, device);
+err_remove_fs:
+	acpi_processor_remove_fs(device);
+err_free_cpumask:
+	free_cpumask_var(pr->throttling.shared_cpu_map);
+
+	return result;
+}
+
+static int acpi_processor_remove(struct acpi_device *device, int type)
+{
+	struct acpi_processor *pr = NULL;
+
+
+	if (!device || !acpi_driver_data(device))
+		return -EINVAL;
+
+	pr = acpi_driver_data(device);
+
+	if (pr->id >= nr_cpu_ids)
+		goto free;
+
+	if (type == ACPI_BUS_REMOVAL_EJECT) {
+		if (acpi_processor_handle_eject(pr))
+			return -EINVAL;
+	}
+
+	acpi_processor_power_exit(pr, device);
+
+	sysfs_remove_link(&device->dev.kobj, "sysdev");
+
+	acpi_processor_remove_fs(device);
+
+	if (pr->cdev) {
+		sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+		sysfs_remove_link(&pr->cdev->device.kobj, "device");
+		thermal_cooling_device_unregister(pr->cdev);
+		pr->cdev = NULL;
+	}
+
+	per_cpu(processors, pr->id) = NULL;
+	per_cpu(processor_device_array, pr->id) = NULL;
+
+free:
+	free_cpumask_var(pr->throttling.shared_cpu_map);
+	kfree(pr);
+
+	return 0;
+}
+
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+/****************************************************************************
+ * 	Acpi processor hotplug support 				       	    *
+ ****************************************************************************/
+
+static int is_processor_present(acpi_handle handle)
+{
+	acpi_status status;
+	unsigned long long sta = 0;
+
+
+	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+
+	if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT))
+		return 1;
+
+	/*
+	 * _STA is mandatory for a processor that supports hot plug
+	 */
+	if (status == AE_NOT_FOUND)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				"Processor does not support hot plug\n"));
+	else
+		ACPI_EXCEPTION((AE_INFO, status,
+				"Processor Device is not present"));
+	return 0;
+}
+
+static
+int acpi_processor_device_add(acpi_handle handle, struct acpi_device **device)
+{
+	acpi_handle phandle;
+	struct acpi_device *pdev;
+
+
+	if (acpi_get_parent(handle, &phandle)) {
+		return -ENODEV;
+	}
+
+	if (acpi_bus_get_device(phandle, &pdev)) {
+		return -ENODEV;
+	}
+
+	if (acpi_bus_add(device, pdev, handle, ACPI_BUS_TYPE_PROCESSOR)) {
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __ref acpi_processor_hotplug_notify(acpi_handle handle,
+						u32 event, void *data)
+{
+	struct acpi_processor *pr;
+	struct acpi_device *device = NULL;
+	int result;
+
+
+	switch (event) {
+	case ACPI_NOTIFY_BUS_CHECK:
+	case ACPI_NOTIFY_DEVICE_CHECK:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		"Processor driver received %s event\n",
+		       (event == ACPI_NOTIFY_BUS_CHECK) ?
+		       "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"));
+
+		if (!is_processor_present(handle))
+			break;
+
+		if (acpi_bus_get_device(handle, &device)) {
+			result = acpi_processor_device_add(handle, &device);
+			if (result)
+				printk(KERN_ERR PREFIX
+					    "Unable to add the device\n");
+			break;
+		}
+		break;
+	case ACPI_NOTIFY_EJECT_REQUEST:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "received ACPI_NOTIFY_EJECT_REQUEST\n"));
+
+		if (acpi_bus_get_device(handle, &device)) {
+			printk(KERN_ERR PREFIX
+				    "Device don't exist, dropping EJECT\n");
+			break;
+		}
+		pr = acpi_driver_data(device);
+		if (!pr) {
+			printk(KERN_ERR PREFIX
+				    "Driver data is NULL, dropping EJECT\n");
+			return;
+		}
+		break;
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Unsupported event [0x%x]\n", event));
+		break;
+	}
+
+	return;
+}
+
+static acpi_status
+processor_walk_namespace_cb(acpi_handle handle,
+			    u32 lvl, void *context, void **rv)
+{
+	acpi_status status;
+	int *action = context;
+	acpi_object_type type = 0;
+
+	status = acpi_get_type(handle, &type);
+	if (ACPI_FAILURE(status))
+		return (AE_OK);
+
+	if (type != ACPI_TYPE_PROCESSOR)
+		return (AE_OK);
+
+	switch (*action) {
+	case INSTALL_NOTIFY_HANDLER:
+		acpi_install_notify_handler(handle,
+					    ACPI_SYSTEM_NOTIFY,
+					    acpi_processor_hotplug_notify,
+					    NULL);
+		break;
+	case UNINSTALL_NOTIFY_HANDLER:
+		acpi_remove_notify_handler(handle,
+					   ACPI_SYSTEM_NOTIFY,
+					   acpi_processor_hotplug_notify);
+		break;
+	default:
+		break;
+	}
+
+	return (AE_OK);
+}
+
+static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
+{
+
+	if (!is_processor_present(handle)) {
+		return AE_ERROR;
+	}
+
+	if (acpi_map_lsapic(handle, p_cpu))
+		return AE_ERROR;
+
+	if (arch_register_cpu(*p_cpu)) {
+		acpi_unmap_lsapic(*p_cpu);
+		return AE_ERROR;
+	}
+
+	return AE_OK;
+}
+
+static int acpi_processor_handle_eject(struct acpi_processor *pr)
+{
+	if (cpu_online(pr->id))
+		cpu_down(pr->id);
+
+	arch_unregister_cpu(pr->id);
+	acpi_unmap_lsapic(pr->id);
+	return (0);
+}
+#else
+static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
+{
+	return AE_ERROR;
+}
+static int acpi_processor_handle_eject(struct acpi_processor *pr)
+{
+	return (-EINVAL);
+}
+#endif
+
+static
+void acpi_processor_install_hotplug_notify(void)
+{
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+	int action = INSTALL_NOTIFY_HANDLER;
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
+			    ACPI_ROOT_OBJECT,
+			    ACPI_UINT32_MAX,
+			    processor_walk_namespace_cb, NULL, &action, NULL);
+#endif
+	register_hotcpu_notifier(&acpi_cpu_notifier);
+}
+
+static
+void acpi_processor_uninstall_hotplug_notify(void)
+{
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+	int action = UNINSTALL_NOTIFY_HANDLER;
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
+			    ACPI_ROOT_OBJECT,
+			    ACPI_UINT32_MAX,
+			    processor_walk_namespace_cb, NULL, &action, NULL);
+#endif
+	unregister_hotcpu_notifier(&acpi_cpu_notifier);
+}
+
+/*
+ * We keep the driver loaded even when ACPI is not running.
+ * This is needed for the powernow-k8 driver, that works even without
+ * ACPI, but needs symbols from this driver
+ */
+
+static int __init acpi_processor_init(void)
+{
+	int result = 0;
+
+	if (acpi_disabled)
+		return 0;
+
+	memset(&errata, 0, sizeof(errata));
+
+#ifdef CONFIG_ACPI_PROCFS
+	acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+	if (!acpi_processor_dir)
+		return -ENOMEM;
+#endif
+	result = cpuidle_register_driver(&acpi_idle_driver);
+	if (result < 0)
+		goto out_proc;
+
+	result = acpi_bus_register_driver(&acpi_processor_driver);
+	if (result < 0)
+		goto out_cpuidle;
+
+	acpi_processor_install_hotplug_notify();
+
+	acpi_thermal_cpufreq_init();
+
+	acpi_processor_ppc_init();
+
+	acpi_processor_throttling_init();
+
+	return 0;
+
+out_cpuidle:
+	cpuidle_unregister_driver(&acpi_idle_driver);
+
+out_proc:
+#ifdef CONFIG_ACPI_PROCFS
+	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+#endif
+
+	return result;
+}
+
+static void __exit acpi_processor_exit(void)
+{
+	if (acpi_disabled)
+		return;
+
+	acpi_processor_ppc_exit();
+
+	acpi_thermal_cpufreq_exit();
+
+	acpi_processor_uninstall_hotplug_notify();
+
+	acpi_bus_unregister_driver(&acpi_processor_driver);
+
+	cpuidle_unregister_driver(&acpi_idle_driver);
+
+#ifdef CONFIG_ACPI_PROCFS
+	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+#endif
+
+	return;
+}
+
+module_init(acpi_processor_init);
+module_exit(acpi_processor_exit);
+
+EXPORT_SYMBOL(acpi_processor_set_thermal_limit);
+
+MODULE_ALIAS("processor");
diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c
deleted file mode 100644
index e306ba9aa34e..000000000000
--- a/drivers/acpi/processor_pdc.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2005 Intel Corporation
- * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
- *
- *	Alex Chiang <achiang@hp.com>
- *	- Unified x86/ia64 implementations
- *	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
- *	- Added _PDC for platforms with Intel CPUs
- */
-#include <linux/dmi.h>
-
-#include <acpi/acpi_drivers.h>
-#include <acpi/processor.h>
-
-#include "internal.h"
-
-#define PREFIX			"ACPI: "
-#define _COMPONENT		ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_pdc");
-
-static int set_no_mwait(const struct dmi_system_id *id)
-{
-	printk(KERN_NOTICE PREFIX "%s detected - "
-		"disabling mwait for CPU C-states\n", id->ident);
-	idle_nomwait = 1;
-	return 0;
-}
-
-static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
-	{
-	set_no_mwait, "IFL91 board", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
-	DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"),
-	DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"),
-	DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL},
-	{
-	set_no_mwait, "Extensa 5220", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
-	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
-	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
-	{},
-};
-
-static void acpi_set_pdc_bits(u32 *buf)
-{
-	buf[0] = ACPI_PDC_REVISION_ID;
-	buf[1] = 1;
-
-	/* Enable coordination with firmware's _TSD info */
-	buf[2] = ACPI_PDC_SMP_T_SWCOORD;
-
-	/* Twiddle arch-specific bits needed for _PDC */
-	arch_acpi_set_pdc_bits(buf);
-}
-
-static struct acpi_object_list *acpi_processor_alloc_pdc(void)
-{
-	struct acpi_object_list *obj_list;
-	union acpi_object *obj;
-	u32 *buf;
-
-	/* allocate and initialize pdc. It will be used later. */
-	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
-	if (!obj_list) {
-		printk(KERN_ERR "Memory allocation error\n");
-		return NULL;
-	}
-
-	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
-	if (!obj) {
-		printk(KERN_ERR "Memory allocation error\n");
-		kfree(obj_list);
-		return NULL;
-	}
-
-	buf = kmalloc(12, GFP_KERNEL);
-	if (!buf) {
-		printk(KERN_ERR "Memory allocation error\n");
-		kfree(obj);
-		kfree(obj_list);
-		return NULL;
-	}
-
-	acpi_set_pdc_bits(buf);
-
-	obj->type = ACPI_TYPE_BUFFER;
-	obj->buffer.length = 12;
-	obj->buffer.pointer = (u8 *) buf;
-	obj_list->count = 1;
-	obj_list->pointer = obj;
-
-	return obj_list;
-}
-
-/*
- * _PDC is required for a BIOS-OS handshake for most of the newer
- * ACPI processor features.
- */
-static int
-acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in)
-{
-	acpi_status status = AE_OK;
-
-	if (idle_nomwait) {
-		/*
-		 * If mwait is disabled for CPU C-states, the C2C3_FFH access
-		 * mode will be disabled in the parameter of _PDC object.
-		 * Of course C1_FFH access mode will also be disabled.
-		 */
-		union acpi_object *obj;
-		u32 *buffer = NULL;
-
-		obj = pdc_in->pointer;
-		buffer = (u32 *)(obj->buffer.pointer);
-		buffer[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH);
-
-	}
-	status = acpi_evaluate_object(handle, "_PDC", pdc_in, NULL);
-
-	if (ACPI_FAILURE(status))
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-		    "Could not evaluate _PDC, using legacy perf. control.\n"));
-
-	return status;
-}
-
-static int early_pdc_done;
-
-void acpi_processor_set_pdc(acpi_handle handle)
-{
-	struct acpi_object_list *obj_list;
-
-	if (arch_has_acpi_pdc() == false)
-		return;
-
-	if (early_pdc_done)
-		return;
-
-	obj_list = acpi_processor_alloc_pdc();
-	if (!obj_list)
-		return;
-
-	acpi_processor_eval_pdc(handle, obj_list);
-
-	kfree(obj_list->pointer->buffer.pointer);
-	kfree(obj_list->pointer);
-	kfree(obj_list);
-}
-EXPORT_SYMBOL_GPL(acpi_processor_set_pdc);
-
-static int early_pdc_optin;
-static int set_early_pdc_optin(const struct dmi_system_id *id)
-{
-	early_pdc_optin = 1;
-	return 0;
-}
-
-static int param_early_pdc_optin(char *s)
-{
-	early_pdc_optin = 1;
-	return 1;
-}
-__setup("acpi_early_pdc_eval", param_early_pdc_optin);
-
-static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = {
-	{
-	set_early_pdc_optin, "HP Envy", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "HP Envy") }, NULL},
-	{
-	set_early_pdc_optin, "HP Pavilion dv6", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv6") }, NULL},
-	{
-	set_early_pdc_optin, "HP Pavilion dv7", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7") }, NULL},
-	{},
-};
-
-static acpi_status
-early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv)
-{
-	acpi_processor_set_pdc(handle);
-	return AE_OK;
-}
-
-void __init acpi_early_processor_set_pdc(void)
-{
-	/*
-	 * Check whether the system is DMI table. If yes, OSPM
-	 * should not use mwait for CPU-states.
-	 */
-	dmi_check_system(processor_idle_dmi_table);
-
-	/*
-	 * Allow systems to opt-in to early _PDC evaluation.
-	 */
-	dmi_check_system(early_pdc_optin_table);
-	if (!early_pdc_optin)
-		return;
-
-	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
-			    ACPI_UINT32_MAX,
-			    early_init_pdc, NULL, NULL, NULL);
-
-	early_pdc_done = 1;
-}
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 7ded7542fc9d..29c6f5766dcf 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -1133,9 +1133,6 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr)
 	int result = 0;
 	struct acpi_processor_throttling *pthrottling;
 
-	if (!pr)
-		return -EINVAL;
-
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
 			  pr->throttling.address,
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index b16ddbf23a9c..89ad11138e48 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -217,6 +217,9 @@ static int acpi_sbs_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
 		val->intval = acpi_battery_technology(battery);
 		break;
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		val->intval = battery->cycle_count;
+		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 		val->intval = battery->design_voltage *
 			acpi_battery_vscale(battery) * 1000;
@@ -276,6 +279,7 @@ static enum power_supply_property sbs_charge_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
@@ -560,6 +564,7 @@ static int acpi_battery_read_info(struct seq_file *seq, void *offset)
 		   battery->design_voltage * acpi_battery_vscale(battery));
 	seq_printf(seq, "design capacity warning: unknown\n");
 	seq_printf(seq, "design capacity low:     unknown\n");
+	seq_printf(seq, "cycle count:		  %i\n", battery->cycle_count);
 	seq_printf(seq, "capacity granularity 1:  unknown\n");
 	seq_printf(seq, "capacity granularity 2:  unknown\n");
 	seq_printf(seq, "model number:            %s\n", battery->device_name);
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 3bde594a9979..f74834a544fd 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -552,8 +552,17 @@ static void acpi_hibernation_leave(void)
 	hibernate_nvs_restore();
 }
 
-static void acpi_pm_enable_gpes(void)
+static int acpi_pm_pre_restore(void)
 {
+	acpi_disable_all_gpes();
+	acpi_os_wait_events_complete(NULL);
+	acpi_ec_suspend_transactions();
+	return 0;
+}
+
+static void acpi_pm_restore_cleanup(void)
+{
+	acpi_ec_resume_transactions();
 	acpi_enable_all_runtime_gpes();
 }
 
@@ -565,8 +574,8 @@ static struct platform_hibernation_ops acpi_hibernation_ops = {
 	.prepare = acpi_pm_prepare,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-	.pre_restore = acpi_pm_disable_gpes,
-	.restore_cleanup = acpi_pm_enable_gpes,
+	.pre_restore = acpi_pm_pre_restore,
+	.restore_cleanup = acpi_pm_restore_cleanup,
 };
 
 /**
@@ -618,8 +627,8 @@ static struct platform_hibernation_ops acpi_hibernation_ops_old = {
 	.prepare = acpi_pm_disable_gpes,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-	.pre_restore = acpi_pm_disable_gpes,
-	.restore_cleanup = acpi_pm_enable_gpes,
+	.pre_restore = acpi_pm_pre_restore,
+	.restore_cleanup = acpi_pm_restore_cleanup,
 	.recover = acpi_pm_finish,
 };
 #endif /* CONFIG_HIBERNATION */
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index a206a12da78a..743f2445e2a1 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -101,6 +101,7 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
 	struct acpi_table_header *header = NULL;
 	struct acpi_table_attr *attr = NULL;
 
+	sysfs_attr_init(&table_attr->attr.attr);
 	if (table_header->signature[0] != '\0')
 		memcpy(table_attr->name, table_header->signature,
 			ACPI_NAME_SIZE);
@@ -475,6 +476,7 @@ void acpi_irq_stats_init(void)
 			goto fail;
 		strncpy(name, buffer, strlen(buffer) + 1);
 
+		sysfs_attr_init(&counter_attrs[i].attr);
 		counter_attrs[i].attr.name = name;
 		counter_attrs[i].attr.mode = 0644;
 		counter_attrs[i].show = counter_show;
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 9073ada88835..5d3893558cf7 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -368,7 +368,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 	int valid = 0;
 	int i;
 
-	/* Critical Shutdown (required) */
+	/* Critical Shutdown */
 	if (flag & ACPI_TRIPS_CRITICAL) {
 		status = acpi_evaluate_integer(tz->device->handle,
 				"_CRT", NULL, &tmp);
@@ -379,17 +379,19 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		 * Below zero (Celsius) values clearly aren't right for sure..
 		 * ... so lets discard those as invalid.
 		 */
-		if (ACPI_FAILURE(status) ||
-				tz->trips.critical.temperature <= 2732) {
+		if (ACPI_FAILURE(status)) {
+			tz->trips.critical.flags.valid = 0;
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+					  "No critical threshold\n"));
+		} else if (tmp <= 2732) {
+			printk(KERN_WARNING FW_BUG "Invalid critical threshold "
+			       "(%llu)\n", tmp);
 			tz->trips.critical.flags.valid = 0;
-			ACPI_EXCEPTION((AE_INFO, status,
-					"No or invalid critical threshold"));
-			return -ENODEV;
 		} else {
 			tz->trips.critical.flags.valid = 1;
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					"Found critical threshold [%lu]\n",
-					tz->trips.critical.temperature));
+					  "Found critical threshold [%lu]\n",
+					  tz->trips.critical.temperature));
 		}
 		if (tz->trips.critical.flags.valid == 1) {
 			if (crt == -1) {
@@ -575,7 +577,23 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 
 static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 {
-	return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
+	int i, valid, ret = acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
+
+	if (ret)
+		return ret;
+
+	valid = tz->trips.critical.flags.valid |
+		tz->trips.hot.flags.valid |
+		tz->trips.passive.flags.valid;
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
+		valid |= tz->trips.active[i].flags.valid;
+
+	if (!valid) {
+		printk(KERN_WARNING FW_BUG "No valid trip found\n");
+		return -ENODEV;
+	}
+	return 0;
 }
 
 static void acpi_thermal_check(void *data)
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 11882dbe2094..c9a49f4747e6 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -289,51 +289,6 @@ acpi_evaluate_integer(acpi_handle handle,
 
 EXPORT_SYMBOL(acpi_evaluate_integer);
 
-#if 0
-acpi_status
-acpi_evaluate_string(acpi_handle handle,
-		     acpi_string pathname,
-		     acpi_object_list * arguments, acpi_string * data)
-{
-	acpi_status status = AE_OK;
-	acpi_object *element = NULL;
-	acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
-
-	if (!data)
-		return AE_BAD_PARAMETER;
-
-	status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
-	if (ACPI_FAILURE(status)) {
-		acpi_util_eval_error(handle, pathname, status);
-		return status;
-	}
-
-	element = (acpi_object *) buffer.pointer;
-
-	if ((element->type != ACPI_TYPE_STRING)
-	    || (element->type != ACPI_TYPE_BUFFER)
-	    || !element->string.length) {
-		acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
-		return AE_BAD_DATA;
-	}
-
-	*data = kzalloc(element->string.length + 1, GFP_KERNEL);
-	if (!data) {
-		printk(KERN_ERR PREFIX "Memory allocation\n");
-		return -ENOMEM;
-	}
-
-	memcpy(*data, element->string.pointer, element->string.length);
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%s]\n", *data));
-
-	kfree(buffer.pointer);
-
-	return AE_OK;
-}
-#endif
-
 acpi_status
 acpi_evaluate_reference(acpi_handle handle,
 			acpi_string pathname,
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 6e9b49149fce..2ff2b6ab5b6c 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -327,7 +327,7 @@ static int acpi_video_device_lcd_set_level(struct acpi_video_device *device,
 			int level);
 static int acpi_video_device_lcd_get_level_current(
 			struct acpi_video_device *device,
-			unsigned long long *level);
+			unsigned long long *level, int init);
 static int acpi_video_get_next_level(struct acpi_video_device *device,
 				     u32 level_current, u32 event);
 static int acpi_video_switch_brightness(struct acpi_video_device *device,
@@ -345,7 +345,7 @@ static int acpi_video_get_brightness(struct backlight_device *bd)
 	struct acpi_video_device *vd =
 		(struct acpi_video_device *)bl_get_data(bd);
 
-	if (acpi_video_device_lcd_get_level_current(vd, &cur_level))
+	if (acpi_video_device_lcd_get_level_current(vd, &cur_level, 0))
 		return -EINVAL;
 	for (i = 2; i < vd->brightness->count; i++) {
 		if (vd->brightness->levels[i] == cur_level)
@@ -414,7 +414,7 @@ static int video_get_cur_state(struct thermal_cooling_device *cooling_dev, unsig
 	unsigned long long level;
 	int offset;
 
-	if (acpi_video_device_lcd_get_level_current(video, &level))
+	if (acpi_video_device_lcd_get_level_current(video, &level, 0))
 		return -EINVAL;
 	for (offset = 2; offset < video->brightness->count; offset++)
 		if (level == video->brightness->levels[offset]) {
@@ -609,7 +609,7 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 
 static int
 acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
-					unsigned long long *level)
+					unsigned long long *level, int init)
 {
 	acpi_status status = AE_OK;
 	int i;
@@ -633,10 +633,16 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 					device->brightness->curr = *level;
 					return 0;
 			}
-			/* BQC returned an invalid level. Stop using it.  */
-			ACPI_WARNING((AE_INFO, "%s returned an invalid level",
-						buf));
-			device->cap._BQC = device->cap._BCQ = 0;
+			if (!init) {
+				/*
+				 * BQC returned an invalid level.
+				 * Stop using it.
+				 */
+				ACPI_WARNING((AE_INFO,
+					      "%s returned an invalid level",
+					      buf));
+				device->cap._BQC = device->cap._BCQ = 0;
+			}
 		} else {
 			/* Fixme:
 			 * should we return an error or ignore this failure?
@@ -892,7 +898,7 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	if (!device->cap._BQC)
 		goto set_level;
 
-	result = acpi_video_device_lcd_get_level_current(device, &level_old);
+	result = acpi_video_device_lcd_get_level_current(device, &level_old, 1);
 	if (result)
 		goto out_free_levels;
 
@@ -903,7 +909,7 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	if (result)
 		goto out_free_levels;
 
-	result = acpi_video_device_lcd_get_level_current(device, &level);
+	result = acpi_video_device_lcd_get_level_current(device, &level, 0);
 	if (result)
 		goto out_free_levels;
 
@@ -1996,7 +2002,7 @@ acpi_video_switch_brightness(struct acpi_video_device *device, int event)
 		goto out;
 
 	result = acpi_video_device_lcd_get_level_current(device,
-							 &level_current);
+							 &level_current, 0);
 	if (result)
 		goto out;
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9c77b0d1a9d0..4a28420efff2 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2232,7 +2232,7 @@ retry:
 		 * Some drives were very specific about that exact sequence.
 		 *
 		 * Note that ATA4 says lba is mandatory so the second check
-		 * shoud never trigger.
+		 * should never trigger.
 		 */
 		if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
 			err_mask = ata_dev_init_params(dev, id[3], id[6]);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 02441fd57e9e..561dec2481cb 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2287,7 +2287,7 @@ EXPORT_SYMBOL_GPL(ata_sff_postreset);
  *	@qc: command
  *
  *	Drain the FIFO and device of any stuck data following a command
- *	failing to complete. In some cases this is neccessary before a
+ *	failing to complete. In some cases this is necessary before a
  *	reset will recover the device.
  *
  */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 294f3020a78a..8e5e13210426 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -161,7 +161,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *
  *	Called when the libata layer is about to issue a command. We wrap
  *	this interface so that we can load the correct ATA timings if
- *	neccessary.
+ *	necessary.
  */
 
 static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index c86c71639a95..727a81ce4c9f 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -180,7 +180,7 @@ static void hpt3x3_init_chipset(struct pci_dev *dev)
  *	@id: Entry in match table
  *
  *	Perform basic initialisation. We set the device up so we access all
- *	ports via BAR4. This is neccessary to work around errata.
+ *	ports via BAR4. This is necessary to work around errata.
  */
 
 static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 36103531feeb..147de2fd66d2 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -131,7 +131,7 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
  *	@qc: command
  *
  *	Drain the FIFO and device of any stuck data following a command
- *	failing to complete. In some cases this is neccessary before a
+ *	failing to complete. In some cases this is necessary before a
  *	reset will recover the device.
  *
  */
diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c
index fe3a865be4e5..b0ca5a47f47d 100644
--- a/drivers/auxdisplay/cfag12864bfb.c
+++ b/drivers/auxdisplay/cfag12864bfb.c
@@ -81,7 +81,7 @@ static struct fb_ops cfag12864bfb_ops = {
 	.fb_mmap = cfag12864bfb_mmap,
 };
 
-static int __init cfag12864bfb_probe(struct platform_device *device)
+static int __devinit cfag12864bfb_probe(struct platform_device *device)
 {
 	int ret = -EINVAL;
  	struct fb_info *info = framebuffer_alloc(0, &device->dev);
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index ee377270beb9..fd52c48ee762 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -3,35 +3,50 @@ menu "Generic Driver Options"
 config UEVENT_HELPER_PATH
 	string "path to uevent helper"
 	depends on HOTPLUG
-	default "/sbin/hotplug"
+	default ""
 	help
 	  Path to uevent helper program forked by the kernel for
 	  every uevent.
+	  Before the switch to the netlink-based uevent source, this was
+	  used to hook hotplug scripts into kernel device events. It
+	  usually pointed to a shell script at /sbin/hotplug.
+	  This should not be used today, because usual systems create
+	  many events at bootup or device discovery in a very short time
+	  frame. One forked process per event can create so many processes
+	  that it creates a high system load, or on smaller systems
+	  it is known to create out-of-memory situations during bootup.
 
 config DEVTMPFS
-	bool "Create a kernel maintained /dev tmpfs (EXPERIMENTAL)"
+	bool "Maintain a devtmpfs filesystem to mount at /dev"
 	depends on HOTPLUG && SHMEM && TMPFS
 	help
-	  This creates a tmpfs filesystem, and mounts it at bootup
-	  and mounts it at /dev. The kernel driver core creates device
-	  nodes for all registered devices in that filesystem. All device
-	  nodes are owned by root and have the default mode of 0600.
-	  Userspace can add and delete the nodes as needed. This is
-	  intended to simplify bootup, and make it possible to delay
-	  the initial coldplug at bootup done by udev in userspace.
-	  It should also provide a simpler way for rescue systems
-	  to bring up a kernel with dynamic major/minor numbers.
-	  Meaningful symlinks, permissions and device ownership must
-	  still be handled by userspace.
-	  If unsure, say N here.
+	  This creates a tmpfs filesystem instance early at bootup.
+	  In this filesystem, the kernel driver core maintains device
+	  nodes with their default names and permissions for all
+	  registered devices with an assigned major/minor number.
+	  Userspace can modify the filesystem content as needed, add
+	  symlinks, and apply needed permissions.
+	  It provides a fully functional /dev directory, where usually
+	  udev runs on top, managing permissions and adding meaningful
+	  symlinks.
+	  In very limited environments, it may provide a sufficient
+	  functional /dev without any further help. It also allows simple
+	  rescue systems, and reliably handles dynamic major/minor numbers.
 
 config DEVTMPFS_MOUNT
-	bool "Automount devtmpfs at /dev"
+	bool "Automount devtmpfs at /dev, after the kernel mounted the rootfs"
 	depends on DEVTMPFS
 	help
-	  This will mount devtmpfs at /dev if the kernel mounts the root
-	  filesystem. It will not affect initramfs based mounting.
-	  If unsure, say N here.
+	  This will instruct the kernel to automatically mount the
+	  devtmpfs filesystem at /dev, directly after the kernel has
+	  mounted the root filesystem. The behavior can be overridden
+	  with the commandline parameter: devtmpfs.mount=0|1.
+	  This option does not affect initramfs based booting, here
+	  the devtmpfs filesystem always needs to be mounted manually
+	  after the roots is mounted.
+	  With this option enabled, it allows to bring up a system in
+	  rescue mode with init=/bin/sh, even when the /dev directory
+	  on the rootfs is completely empty.
 
 config STANDALONE
 	bool "Select only drivers that don't need compile-time external firmware" if EXPERIMENTAL
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index c0c5a43d9fb3..71f6af5c8b0b 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -70,7 +70,7 @@ static ssize_t drv_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops driver_sysfs_ops = {
+static const struct sysfs_ops driver_sysfs_ops = {
 	.show	= drv_attr_show,
 	.store	= drv_attr_store,
 };
@@ -115,7 +115,7 @@ static ssize_t bus_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops bus_sysfs_ops = {
+static const struct sysfs_ops bus_sysfs_ops = {
 	.show	= bus_attr_show,
 	.store	= bus_attr_store,
 };
@@ -154,7 +154,7 @@ static int bus_uevent_filter(struct kset *kset, struct kobject *kobj)
 	return 0;
 }
 
-static struct kset_uevent_ops bus_uevent_ops = {
+static const struct kset_uevent_ops bus_uevent_ops = {
 	.filter = bus_uevent_filter,
 };
 
@@ -173,10 +173,10 @@ static ssize_t driver_unbind(struct device_driver *drv,
 	dev = bus_find_device_by_name(bus, NULL, buf);
 	if (dev && dev->driver == drv) {
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
+			device_lock(dev->parent);
 		device_release_driver(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 		err = count;
 	}
 	put_device(dev);
@@ -200,12 +200,12 @@ static ssize_t driver_bind(struct device_driver *drv,
 	dev = bus_find_device_by_name(bus, NULL, buf);
 	if (dev && dev->driver == NULL && driver_match_device(drv, dev)) {
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
-		down(&dev->sem);
+			device_lock(dev->parent);
+		device_lock(dev);
 		err = driver_probe_device(drv, dev);
-		up(&dev->sem);
+		device_unlock(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 
 		if (err > 0) {
 			/* success */
@@ -744,10 +744,10 @@ static int __must_check bus_rescan_devices_helper(struct device *dev,
 
 	if (!dev->driver) {
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
+			device_lock(dev->parent);
 		ret = device_attach(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 	}
 	return ret < 0 ? ret : 0;
 }
@@ -779,10 +779,10 @@ int device_reprobe(struct device *dev)
 {
 	if (dev->driver) {
 		if (dev->parent)        /* Needed for USB */
-			down(&dev->parent->sem);
+			device_lock(dev->parent);
 		device_release_driver(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 	}
 	return bus_rescan_devices_helper(dev, NULL);
 }
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 6e2c3b064f53..0147f476b8a9 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -31,7 +31,7 @@ static ssize_t class_attr_show(struct kobject *kobj, struct attribute *attr,
 	ssize_t ret = -EIO;
 
 	if (class_attr->show)
-		ret = class_attr->show(cp->class, buf);
+		ret = class_attr->show(cp->class, class_attr, buf);
 	return ret;
 }
 
@@ -43,7 +43,7 @@ static ssize_t class_attr_store(struct kobject *kobj, struct attribute *attr,
 	ssize_t ret = -EIO;
 
 	if (class_attr->store)
-		ret = class_attr->store(cp->class, buf, count);
+		ret = class_attr->store(cp->class, class_attr, buf, count);
 	return ret;
 }
 
@@ -63,7 +63,7 @@ static void class_release(struct kobject *kobj)
 	kfree(cp);
 }
 
-static struct sysfs_ops class_sysfs_ops = {
+static const struct sysfs_ops class_sysfs_ops = {
 	.show	= class_attr_show,
 	.store	= class_attr_store,
 };
@@ -490,6 +490,16 @@ void class_interface_unregister(struct class_interface *class_intf)
 	class_put(parent);
 }
 
+ssize_t show_class_attr_string(struct class *class, struct class_attribute *attr,
+                        	char *buf)
+{
+	struct class_attribute_string *cs;
+	cs = container_of(attr, struct class_attribute_string, attr);
+	return snprintf(buf, PAGE_SIZE, "%s\n", cs->str);
+}
+
+EXPORT_SYMBOL_GPL(show_class_attr_string);
+
 struct class_compat {
 	struct kobject *kobj;
 };
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 282025770429..ef55df34ddd0 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -100,7 +100,7 @@ static ssize_t dev_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops dev_sysfs_ops = {
+static const struct sysfs_ops dev_sysfs_ops = {
 	.show	= dev_attr_show,
 	.store	= dev_attr_store,
 };
@@ -252,7 +252,7 @@ static int dev_uevent(struct kset *kset, struct kobject *kobj,
 	return retval;
 }
 
-static struct kset_uevent_ops device_uevent_ops = {
+static const struct kset_uevent_ops device_uevent_ops = {
 	.filter =	dev_uevent_filter,
 	.name =		dev_uevent_name,
 	.uevent =	dev_uevent,
@@ -306,15 +306,10 @@ static ssize_t store_uevent(struct device *dev, struct device_attribute *attr,
 {
 	enum kobject_action action;
 
-	if (kobject_action_type(buf, count, &action) == 0) {
+	if (kobject_action_type(buf, count, &action) == 0)
 		kobject_uevent(&dev->kobj, action);
-		goto out;
-	}
-
-	dev_err(dev, "uevent: unsupported action-string; this will "
-		     "be ignored in a future kernel version\n");
-	kobject_uevent(&dev->kobj, KOBJ_ADD);
-out:
+	else
+		dev_err(dev, "uevent: unknown action-string\n");
 	return count;
 }
 
@@ -607,6 +602,7 @@ static struct kobject *get_device_parent(struct device *dev,
 	int retval;
 
 	if (dev->class) {
+		static DEFINE_MUTEX(gdp_mutex);
 		struct kobject *kobj = NULL;
 		struct kobject *parent_kobj;
 		struct kobject *k;
@@ -623,6 +619,8 @@ static struct kobject *get_device_parent(struct device *dev,
 		else
 			parent_kobj = &parent->kobj;
 
+		mutex_lock(&gdp_mutex);
+
 		/* find our class-directory at the parent and reference it */
 		spin_lock(&dev->class->p->class_dirs.list_lock);
 		list_for_each_entry(k, &dev->class->p->class_dirs.list, entry)
@@ -631,20 +629,26 @@ static struct kobject *get_device_parent(struct device *dev,
 				break;
 			}
 		spin_unlock(&dev->class->p->class_dirs.list_lock);
-		if (kobj)
+		if (kobj) {
+			mutex_unlock(&gdp_mutex);
 			return kobj;
+		}
 
 		/* or create a new class-directory at the parent device */
 		k = kobject_create();
-		if (!k)
+		if (!k) {
+			mutex_unlock(&gdp_mutex);
 			return NULL;
+		}
 		k->kset = &dev->class->p->class_dirs;
 		retval = kobject_add(k, parent_kobj, "%s", dev->class->name);
 		if (retval < 0) {
+			mutex_unlock(&gdp_mutex);
 			kobject_put(k);
 			return NULL;
 		}
 		/* do not emit an uevent for this simple "glue" directory */
+		mutex_unlock(&gdp_mutex);
 		return k;
 	}
 
@@ -1574,22 +1578,16 @@ int device_rename(struct device *dev, char *new_name)
 	if (old_class_name) {
 		new_class_name = make_class_name(dev->class->name, &dev->kobj);
 		if (new_class_name) {
-			error = sysfs_create_link_nowarn(&dev->parent->kobj,
-							 &dev->kobj,
-							 new_class_name);
-			if (error)
-				goto out;
-			sysfs_remove_link(&dev->parent->kobj, old_class_name);
+			error = sysfs_rename_link(&dev->parent->kobj,
+						  &dev->kobj,
+						  old_class_name,
+						  new_class_name);
 		}
 	}
 #else
 	if (dev->class) {
-		error = sysfs_create_link_nowarn(&dev->class->p->class_subsys.kobj,
-						 &dev->kobj, dev_name(dev));
-		if (error)
-			goto out;
-		sysfs_remove_link(&dev->class->p->class_subsys.kobj,
-				  old_device_name);
+		error = sysfs_rename_link(&dev->class->p->class_subsys.kobj,
+					  &dev->kobj, old_device_name, new_name);
 	}
 #endif
 
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index 958bd1540c30..7036e8e96ab8 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -13,8 +13,11 @@
 
 #include "base.h"
 
+static struct sysdev_class_attribute *cpu_sysdev_class_attrs[];
+
 struct sysdev_class cpu_sysdev_class = {
 	.name = "cpu",
+	.attrs = cpu_sysdev_class_attrs,
 };
 EXPORT_SYMBOL(cpu_sysdev_class);
 
@@ -76,34 +79,24 @@ void unregister_cpu(struct cpu *cpu)
 }
 
 #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-static ssize_t cpu_probe_store(struct class *class, const char *buf,
+static ssize_t cpu_probe_store(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				const char *buf,
 			       size_t count)
 {
 	return arch_cpu_probe(buf, count);
 }
 
-static ssize_t cpu_release_store(struct class *class, const char *buf,
+static ssize_t cpu_release_store(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				const char *buf,
 				 size_t count)
 {
 	return arch_cpu_release(buf, count);
 }
 
-static CLASS_ATTR(probe, S_IWUSR, NULL, cpu_probe_store);
-static CLASS_ATTR(release, S_IWUSR, NULL, cpu_release_store);
-
-int __init cpu_probe_release_init(void)
-{
-	int rc;
-
-	rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
-			       &class_attr_probe.attr);
-	if (!rc)
-		rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
-				       &class_attr_release.attr);
-
-	return rc;
-}
-device_initcall(cpu_probe_release_init);
+static SYSDEV_ATTR(probe, S_IWUSR, NULL, cpu_probe_store);
+static SYSDEV_ATTR(release, S_IWUSR, NULL, cpu_release_store);
 #endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
 
 #else /* ... !CONFIG_HOTPLUG_CPU */
@@ -141,31 +134,39 @@ static SYSDEV_ATTR(crash_notes, 0400, show_crash_notes, NULL);
 /*
  * Print cpu online, possible, present, and system maps
  */
-static ssize_t print_cpus_map(char *buf, const struct cpumask *map)
+
+struct cpu_attr {
+	struct sysdev_class_attribute attr;
+	const struct cpumask *const * const map;
+};
+
+static ssize_t show_cpus_attr(struct sysdev_class *class,
+			      struct sysdev_class_attribute *attr,
+			      char *buf)
 {
-	int n = cpulist_scnprintf(buf, PAGE_SIZE-2, map);
+	struct cpu_attr *ca = container_of(attr, struct cpu_attr, attr);
+	int n = cpulist_scnprintf(buf, PAGE_SIZE-2, *(ca->map));
 
 	buf[n++] = '\n';
 	buf[n] = '\0';
 	return n;
 }
 
-#define	print_cpus_func(type) \
-static ssize_t print_cpus_##type(struct sysdev_class *class, char *buf)	\
-{									\
-	return print_cpus_map(buf, cpu_##type##_mask);			\
-}									\
-static struct sysdev_class_attribute attr_##type##_map = 		\
-	_SYSDEV_CLASS_ATTR(type, 0444, print_cpus_##type, NULL)
+#define _CPU_ATTR(name, map)						\
+	{ _SYSDEV_CLASS_ATTR(name, 0444, show_cpus_attr, NULL), map }
 
-print_cpus_func(online);
-print_cpus_func(possible);
-print_cpus_func(present);
+/* Keep in sync with cpu_sysdev_class_attrs */
+static struct cpu_attr cpu_attrs[] = {
+	_CPU_ATTR(online, &cpu_online_mask),
+	_CPU_ATTR(possible, &cpu_possible_mask),
+	_CPU_ATTR(present, &cpu_present_mask),
+};
 
 /*
  * Print values for NR_CPUS and offlined cpus
  */
-static ssize_t print_cpus_kernel_max(struct sysdev_class *class, char *buf)
+static ssize_t print_cpus_kernel_max(struct sysdev_class *class,
+				     struct sysdev_class_attribute *attr, char *buf)
 {
 	int n = snprintf(buf, PAGE_SIZE-2, "%d\n", NR_CPUS - 1);
 	return n;
@@ -175,7 +176,8 @@ static SYSDEV_CLASS_ATTR(kernel_max, 0444, print_cpus_kernel_max, NULL);
 /* arch-optional setting to enable display of offline cpus >= nr_cpu_ids */
 unsigned int total_cpus;
 
-static ssize_t print_cpus_offline(struct sysdev_class *class, char *buf)
+static ssize_t print_cpus_offline(struct sysdev_class *class,
+				  struct sysdev_class_attribute *attr, char *buf)
 {
 	int n = 0, len = PAGE_SIZE-2;
 	cpumask_var_t offline;
@@ -204,29 +206,6 @@ static ssize_t print_cpus_offline(struct sysdev_class *class, char *buf)
 }
 static SYSDEV_CLASS_ATTR(offline, 0444, print_cpus_offline, NULL);
 
-static struct sysdev_class_attribute *cpu_state_attr[] = {
-	&attr_online_map,
-	&attr_possible_map,
-	&attr_present_map,
-	&attr_kernel_max,
-	&attr_offline,
-};
-
-static int cpu_states_init(void)
-{
-	int i;
-	int err = 0;
-
-	for (i = 0;  i < ARRAY_SIZE(cpu_state_attr); i++) {
-		int ret;
-		ret = sysdev_class_create_file(&cpu_sysdev_class,
-						cpu_state_attr[i]);
-		if (!err)
-			err = ret;
-	}
-	return err;
-}
-
 /*
  * register_cpu - Setup a sysfs device for a CPU.
  * @cpu - cpu->hotpluggable field set to 1 will generate a control file in
@@ -272,9 +251,6 @@ int __init cpu_dev_init(void)
 	int err;
 
 	err = sysdev_class_register(&cpu_sysdev_class);
-	if (!err)
-		err = cpu_states_init();
-
 #if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
 	if (!err)
 		err = sched_create_sysfs_power_savings_entries(&cpu_sysdev_class);
@@ -282,3 +258,16 @@ int __init cpu_dev_init(void)
 
 	return err;
 }
+
+static struct sysdev_class_attribute *cpu_sysdev_class_attrs[] = {
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+	&attr_probe,
+	&attr_release,
+#endif
+	&cpu_attrs[0].attr,
+	&cpu_attrs[1].attr,
+	&cpu_attrs[2].attr,
+	&attr_kernel_max,
+	&attr_offline,
+	NULL
+};
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index ee95c76bfd3d..c89291f8a16b 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -85,7 +85,7 @@ static void driver_sysfs_remove(struct device *dev)
  * for before calling this. (It is ok to call with no other effort
  * from a driver's probe() method.)
  *
- * This function must be called with @dev->sem held.
+ * This function must be called with the device lock held.
  */
 int device_bind_driver(struct device *dev)
 {
@@ -190,8 +190,8 @@ EXPORT_SYMBOL_GPL(wait_for_device_probe);
  * This function returns -ENODEV if the device is not registered,
  * 1 if the device is bound successfully and 0 otherwise.
  *
- * This function must be called with @dev->sem held.  When called for a
- * USB interface, @dev->parent->sem must be held as well.
+ * This function must be called with @dev lock held.  When called for a
+ * USB interface, @dev->parent lock must be held as well.
  */
 int driver_probe_device(struct device_driver *drv, struct device *dev)
 {
@@ -233,13 +233,13 @@ static int __device_attach(struct device_driver *drv, void *data)
  * 0 if no matching driver was found;
  * -ENODEV if the device is not registered.
  *
- * When called for a USB interface, @dev->parent->sem must be held.
+ * When called for a USB interface, @dev->parent lock must be held.
  */
 int device_attach(struct device *dev)
 {
 	int ret = 0;
 
-	down(&dev->sem);
+	device_lock(dev);
 	if (dev->driver) {
 		ret = device_bind_driver(dev);
 		if (ret == 0)
@@ -253,7 +253,7 @@ int device_attach(struct device *dev)
 		ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
 		pm_runtime_put_sync(dev);
 	}
-	up(&dev->sem);
+	device_unlock(dev);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(device_attach);
@@ -276,13 +276,13 @@ static int __driver_attach(struct device *dev, void *data)
 		return 0;
 
 	if (dev->parent)	/* Needed for USB */
-		down(&dev->parent->sem);
-	down(&dev->sem);
+		device_lock(dev->parent);
+	device_lock(dev);
 	if (!dev->driver)
 		driver_probe_device(drv, dev);
-	up(&dev->sem);
+	device_unlock(dev);
 	if (dev->parent)
-		up(&dev->parent->sem);
+		device_unlock(dev->parent);
 
 	return 0;
 }
@@ -303,8 +303,8 @@ int driver_attach(struct device_driver *drv)
 EXPORT_SYMBOL_GPL(driver_attach);
 
 /*
- * __device_release_driver() must be called with @dev->sem held.
- * When called for a USB interface, @dev->parent->sem must be held as well.
+ * __device_release_driver() must be called with @dev lock held.
+ * When called for a USB interface, @dev->parent lock must be held as well.
  */
 static void __device_release_driver(struct device *dev)
 {
@@ -343,7 +343,7 @@ static void __device_release_driver(struct device *dev)
  * @dev: device.
  *
  * Manually detach device from driver.
- * When called for a USB interface, @dev->parent->sem must be held.
+ * When called for a USB interface, @dev->parent lock must be held.
  */
 void device_release_driver(struct device *dev)
 {
@@ -352,9 +352,9 @@ void device_release_driver(struct device *dev)
 	 * within their ->remove callback for the same device, they
 	 * will deadlock right here.
 	 */
-	down(&dev->sem);
+	device_lock(dev);
 	__device_release_driver(dev);
-	up(&dev->sem);
+	device_unlock(dev);
 }
 EXPORT_SYMBOL_GPL(device_release_driver);
 
@@ -381,13 +381,13 @@ void driver_detach(struct device_driver *drv)
 		spin_unlock(&drv->p->klist_devices.k_lock);
 
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
-		down(&dev->sem);
+			device_lock(dev->parent);
+		device_lock(dev);
 		if (dev->driver == drv)
 			__device_release_driver(dev);
-		up(&dev->sem);
+		device_unlock(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 		put_device(dev);
 	}
 }
diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 42ae452b36b0..dac478c6e460 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -301,6 +301,19 @@ int devtmpfs_delete_node(struct device *dev)
 		if (dentry->d_inode) {
 			err = vfs_getattr(nd.path.mnt, dentry, &stat);
 			if (!err && dev_mynode(dev, dentry->d_inode, &stat)) {
+				struct iattr newattrs;
+				/*
+				 * before unlinking this node, reset permissions
+				 * of possible references like hardlinks
+				 */
+				newattrs.ia_uid = 0;
+				newattrs.ia_gid = 0;
+				newattrs.ia_mode = stat.mode & ~0777;
+				newattrs.ia_valid =
+					ATTR_UID|ATTR_GID|ATTR_MODE;
+				mutex_lock(&dentry->d_inode->i_mutex);
+				notify_change(dentry, &newattrs);
+				mutex_unlock(&dentry->d_inode->i_mutex);
 				err = vfs_unlink(nd.path.dentry->d_inode,
 						 dentry);
 				if (!err || err == -ENOENT)
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index a95024166b66..d0dc26ad5387 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -19,7 +19,6 @@
 #include <linux/kthread.h>
 #include <linux/highmem.h>
 #include <linux/firmware.h>
-#include "base.h"
 
 #define to_dev(obj) container_of(obj, struct device, kobj)
 
@@ -69,7 +68,9 @@ fw_load_abort(struct firmware_priv *fw_priv)
 }
 
 static ssize_t
-firmware_timeout_show(struct class *class, char *buf)
+firmware_timeout_show(struct class *class,
+		      struct class_attribute *attr,
+		      char *buf)
 {
 	return sprintf(buf, "%d\n", loading_timeout);
 }
@@ -87,7 +88,9 @@ firmware_timeout_show(struct class *class, char *buf)
  *	Note: zero means 'wait forever'.
  **/
 static ssize_t
-firmware_timeout_store(struct class *class, const char *buf, size_t count)
+firmware_timeout_store(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	loading_timeout = simple_strtol(buf, NULL, 10);
 	if (loading_timeout < 0)
@@ -610,7 +613,7 @@ request_firmware_work_func(void *arg)
 }
 
 /**
- * request_firmware_nowait: asynchronous version of request_firmware
+ * request_firmware_nowait - asynchronous version of request_firmware
  * @module: module requesting the firmware
  * @uevent: sends uevent to copy the firmware image if this flag
  *	is non-zero else the firmware copy must be done manually.
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index bd025059711f..2f8691511190 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -44,7 +44,7 @@ static int memory_uevent(struct kset *kset, struct kobject *obj, struct kobj_uev
 	return retval;
 }
 
-static struct kset_uevent_ops memory_uevent_ops = {
+static const struct kset_uevent_ops memory_uevent_ops = {
 	.name		= memory_uevent_name,
 	.uevent		= memory_uevent,
 };
@@ -309,17 +309,18 @@ static SYSDEV_ATTR(removable, 0444, show_mem_removable, NULL);
  * Block size attribute stuff
  */
 static ssize_t
-print_block_size(struct class *class, char *buf)
+print_block_size(struct sysdev_class *class, struct sysdev_class_attribute *attr,
+		 char *buf)
 {
 	return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
 }
 
-static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
+static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
 
 static int block_size_init(void)
 {
 	return sysfs_create_file(&memory_sysdev_class.kset.kobj,
-				&class_attr_block_size_bytes.attr);
+				&attr_block_size_bytes.attr);
 }
 
 /*
@@ -330,7 +331,8 @@ static int block_size_init(void)
  */
 #ifdef CONFIG_ARCH_MEMORY_PROBE
 static ssize_t
-memory_probe_store(struct class *class, const char *buf, size_t count)
+memory_probe_store(struct class *class, struct class_attribute *attr,
+		   const char *buf, size_t count)
 {
 	u64 phys_addr;
 	int nid;
@@ -367,7 +369,9 @@ static inline int memory_probe_init(void)
 
 /* Soft offline a page */
 static ssize_t
-store_soft_offline_page(struct class *class, const char *buf, size_t count)
+store_soft_offline_page(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	int ret;
 	u64 pfn;
@@ -384,7 +388,9 @@ store_soft_offline_page(struct class *class, const char *buf, size_t count)
 
 /* Forcibly offline a page, including killing processes. */
 static ssize_t
-store_hard_offline_page(struct class *class, const char *buf, size_t count)
+store_hard_offline_page(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	int ret;
 	u64 pfn;
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 70122791683d..ad43185ec15a 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -16,8 +16,11 @@
 #include <linux/device.h>
 #include <linux/swap.h>
 
+static struct sysdev_class_attribute *node_state_attrs[];
+
 static struct sysdev_class node_class = {
 	.name = "node",
+	.attrs = node_state_attrs,
 };
 
 
@@ -544,76 +547,52 @@ static ssize_t print_nodes_state(enum node_states state, char *buf)
 	return n;
 }
 
-static ssize_t print_nodes_possible(struct sysdev_class *class, char *buf)
-{
-	return print_nodes_state(N_POSSIBLE, buf);
-}
-
-static ssize_t print_nodes_online(struct sysdev_class *class, char *buf)
-{
-	return print_nodes_state(N_ONLINE, buf);
-}
-
-static ssize_t print_nodes_has_normal_memory(struct sysdev_class *class,
-						char *buf)
-{
-	return print_nodes_state(N_NORMAL_MEMORY, buf);
-}
+struct node_attr {
+	struct sysdev_class_attribute attr;
+	enum node_states state;
+};
 
-static ssize_t print_nodes_has_cpu(struct sysdev_class *class, char *buf)
+static ssize_t show_node_state(struct sysdev_class *class,
+			       struct sysdev_class_attribute *attr, char *buf)
 {
-	return print_nodes_state(N_CPU, buf);
+	struct node_attr *na = container_of(attr, struct node_attr, attr);
+	return print_nodes_state(na->state, buf);
 }
 
-static SYSDEV_CLASS_ATTR(possible, 0444, print_nodes_possible, NULL);
-static SYSDEV_CLASS_ATTR(online, 0444, print_nodes_online, NULL);
-static SYSDEV_CLASS_ATTR(has_normal_memory, 0444, print_nodes_has_normal_memory,
-									NULL);
-static SYSDEV_CLASS_ATTR(has_cpu, 0444, print_nodes_has_cpu, NULL);
+#define _NODE_ATTR(name, state) \
+	{ _SYSDEV_CLASS_ATTR(name, 0444, show_node_state, NULL), state }
 
+static struct node_attr node_state_attr[] = {
+	_NODE_ATTR(possible, N_POSSIBLE),
+	_NODE_ATTR(online, N_ONLINE),
+	_NODE_ATTR(has_normal_memory, N_NORMAL_MEMORY),
+	_NODE_ATTR(has_cpu, N_CPU),
 #ifdef CONFIG_HIGHMEM
-static ssize_t print_nodes_has_high_memory(struct sysdev_class *class,
-						 char *buf)
-{
-	return print_nodes_state(N_HIGH_MEMORY, buf);
-}
-
-static SYSDEV_CLASS_ATTR(has_high_memory, 0444, print_nodes_has_high_memory,
-									 NULL);
+	_NODE_ATTR(has_high_memory, N_HIGH_MEMORY),
 #endif
+};
 
-struct sysdev_class_attribute *node_state_attr[] = {
-	&attr_possible,
-	&attr_online,
-	&attr_has_normal_memory,
+static struct sysdev_class_attribute *node_state_attrs[] = {
+	&node_state_attr[0].attr,
+	&node_state_attr[1].attr,
+	&node_state_attr[2].attr,
+	&node_state_attr[3].attr,
 #ifdef CONFIG_HIGHMEM
-	&attr_has_high_memory,
+	&node_state_attr[4].attr,
 #endif
-	&attr_has_cpu,
+	NULL
 };
 
-static int node_states_init(void)
-{
-	int i;
-	int err = 0;
-
-	for (i = 0;  i < NR_NODE_STATES; i++) {
-		int ret;
-		ret = sysdev_class_create_file(&node_class, node_state_attr[i]);
-		if (!err)
-			err = ret;
-	}
-	return err;
-}
-
 #define NODE_CALLBACK_PRI	2	/* lower than SLAB */
 static int __init register_node_type(void)
 {
 	int ret;
 
+ 	BUILD_BUG_ON(ARRAY_SIZE(node_state_attr) != NR_NODE_STATES);
+ 	BUILD_BUG_ON(ARRAY_SIZE(node_state_attrs)-1 != NR_NODE_STATES);
+
 	ret = sysdev_class_register(&node_class);
 	if (!ret) {
-		ret = node_states_init();
 		hotplug_memory_notifier(node_memory_callback,
 					NODE_CALLBACK_PRI);
 	}
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 58efaf2f1259..1ba9d617d241 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -128,7 +128,7 @@ struct platform_object {
 };
 
 /**
- * platform_device_put
+ * platform_device_put - destroy a platform device
  * @pdev: platform device to free
  *
  * Free all memory associated with a platform device.  This function must
@@ -152,7 +152,7 @@ static void platform_device_release(struct device *dev)
 }
 
 /**
- * platform_device_alloc
+ * platform_device_alloc - create a platform device
  * @name: base name of the device we're adding
  * @id: instance id
  *
@@ -177,7 +177,7 @@ struct platform_device *platform_device_alloc(const char *name, int id)
 EXPORT_SYMBOL_GPL(platform_device_alloc);
 
 /**
- * platform_device_add_resources
+ * platform_device_add_resources - add resources to a platform device
  * @pdev: platform device allocated by platform_device_alloc to add resources to
  * @res: set of resources that needs to be allocated for the device
  * @num: number of resources
@@ -202,7 +202,7 @@ int platform_device_add_resources(struct platform_device *pdev,
 EXPORT_SYMBOL_GPL(platform_device_add_resources);
 
 /**
- * platform_device_add_data
+ * platform_device_add_data - add platform-specific data to a platform device
  * @pdev: platform device allocated by platform_device_alloc to add resources to
  * @data: platform specific data for this platform device
  * @size: size of platform specific data
@@ -344,7 +344,7 @@ void platform_device_unregister(struct platform_device *pdev)
 EXPORT_SYMBOL_GPL(platform_device_unregister);
 
 /**
- * platform_device_register_simple
+ * platform_device_register_simple - add a platform-level device and its resources
  * @name: base name of the device we're adding
  * @id: instance id
  * @res: set of resources that needs to be allocated for the device
@@ -396,7 +396,7 @@ error:
 EXPORT_SYMBOL_GPL(platform_device_register_simple);
 
 /**
- * platform_device_register_data
+ * platform_device_register_data - add a platform-level device with platform-specific data
  * @parent: parent device for the device we're adding
  * @name: base name of the device we're adding
  * @id: instance id
@@ -473,7 +473,7 @@ static void platform_drv_shutdown(struct device *_dev)
 }
 
 /**
- * platform_driver_register
+ * platform_driver_register - register a driver for platform-level devices
  * @drv: platform driver structure
  */
 int platform_driver_register(struct platform_driver *drv)
@@ -491,7 +491,7 @@ int platform_driver_register(struct platform_driver *drv)
 EXPORT_SYMBOL_GPL(platform_driver_register);
 
 /**
- * platform_driver_unregister
+ * platform_driver_unregister - unregister a driver for platform-level devices
  * @drv: platform driver structure
  */
 void platform_driver_unregister(struct platform_driver *drv)
@@ -548,6 +548,64 @@ int __init_or_module platform_driver_probe(struct platform_driver *drv,
 }
 EXPORT_SYMBOL_GPL(platform_driver_probe);
 
+/**
+ * platform_create_bundle - register driver and create corresponding device
+ * @driver: platform driver structure
+ * @probe: the driver probe routine, probably from an __init section
+ * @res: set of resources that needs to be allocated for the device
+ * @n_res: number of resources
+ * @data: platform specific data for this platform device
+ * @size: size of platform specific data
+ *
+ * Use this in legacy-style modules that probe hardware directly and
+ * register a single platform device and corresponding platform driver.
+ */
+struct platform_device * __init_or_module platform_create_bundle(
+			struct platform_driver *driver,
+			int (*probe)(struct platform_device *),
+			struct resource *res, unsigned int n_res,
+			const void *data, size_t size)
+{
+	struct platform_device *pdev;
+	int error;
+
+	pdev = platform_device_alloc(driver->driver.name, -1);
+	if (!pdev) {
+		error = -ENOMEM;
+		goto err_out;
+	}
+
+	if (res) {
+		error = platform_device_add_resources(pdev, res, n_res);
+		if (error)
+			goto err_pdev_put;
+	}
+
+	if (data) {
+		error = platform_device_add_data(pdev, data, size);
+		if (error)
+			goto err_pdev_put;
+	}
+
+	error = platform_device_add(pdev);
+	if (error)
+		goto err_pdev_put;
+
+	error = platform_driver_probe(driver, probe);
+	if (error)
+		goto err_pdev_del;
+
+	return pdev;
+
+err_pdev_del:
+	platform_device_del(pdev);
+err_pdev_put:
+	platform_device_put(pdev);
+err_out:
+	return ERR_PTR(error);
+}
+EXPORT_SYMBOL_GPL(platform_create_bundle);
+
 /* modalias support enables more hands-off userspace setup:
  * (a) environment variable lets new-style hotplug events work once system is
  *     fully running:  "modprobe $MODALIAS"
@@ -578,7 +636,7 @@ static int platform_uevent(struct device *dev, struct kobj_uevent_env *env)
 }
 
 static const struct platform_device_id *platform_match_id(
-			struct platform_device_id *id,
+			const struct platform_device_id *id,
 			struct platform_device *pdev)
 {
 	while (id->name[0]) {
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 0e26a6f6fd48..d477f4dc5e51 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -35,8 +35,8 @@
  * because children are guaranteed to be discovered after parents, and
  * are inserted at the back of the list on discovery.
  *
- * Since device_pm_add() may be called with a device semaphore held,
- * we must never try to acquire a device semaphore while holding
+ * Since device_pm_add() may be called with a device lock held,
+ * we must never try to acquire a device lock while holding
  * dpm_list_mutex.
  */
 
@@ -508,7 +508,7 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
 	TRACE_RESUME(0);
 
 	dpm_wait(dev->parent, async);
-	down(&dev->sem);
+	device_lock(dev);
 
 	dev->power.status = DPM_RESUMING;
 
@@ -543,7 +543,7 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
 		}
 	}
  End:
-	up(&dev->sem);
+	device_unlock(dev);
 	complete_all(&dev->power.completion);
 
 	TRACE_RESUME(error);
@@ -629,7 +629,7 @@ static void dpm_resume(pm_message_t state)
  */
 static void device_complete(struct device *dev, pm_message_t state)
 {
-	down(&dev->sem);
+	device_lock(dev);
 
 	if (dev->class && dev->class->pm && dev->class->pm->complete) {
 		pm_dev_dbg(dev, state, "completing class ");
@@ -646,7 +646,7 @@ static void device_complete(struct device *dev, pm_message_t state)
 		dev->bus->pm->complete(dev);
 	}
 
-	up(&dev->sem);
+	device_unlock(dev);
 }
 
 /**
@@ -809,7 +809,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 	int error = 0;
 
 	dpm_wait_for_children(dev, async);
-	down(&dev->sem);
+	device_lock(dev);
 
 	if (async_error)
 		goto End;
@@ -849,7 +849,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 		dev->power.status = DPM_OFF;
 
  End:
-	up(&dev->sem);
+	device_unlock(dev);
 	complete_all(&dev->power.completion);
 
 	return error;
@@ -938,7 +938,7 @@ static int device_prepare(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
-	down(&dev->sem);
+	device_lock(dev);
 
 	if (dev->bus && dev->bus->pm && dev->bus->pm->prepare) {
 		pm_dev_dbg(dev, state, "preparing ");
@@ -962,7 +962,7 @@ static int device_prepare(struct device *dev, pm_message_t state)
 		suspend_report_result(dev->class->pm->prepare, error);
 	}
  End:
-	up(&dev->sem);
+	device_unlock(dev);
 
 	return error;
 }
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 0d903909af7e..8980feec5d14 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -54,7 +54,7 @@ sysdev_store(struct kobject *kobj, struct attribute *attr,
 	return -EIO;
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show	= sysdev_show,
 	.store	= sysdev_store,
 };
@@ -89,7 +89,7 @@ static ssize_t sysdev_class_show(struct kobject *kobj, struct attribute *attr,
 	struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr);
 
 	if (class_attr->show)
-		return class_attr->show(class, buffer);
+		return class_attr->show(class, class_attr, buffer);
 	return -EIO;
 }
 
@@ -100,11 +100,11 @@ static ssize_t sysdev_class_store(struct kobject *kobj, struct attribute *attr,
 	struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr);
 
 	if (class_attr->store)
-		return class_attr->store(class, buffer, count);
+		return class_attr->store(class, class_attr, buffer, count);
 	return -EIO;
 }
 
-static struct sysfs_ops sysfs_class_ops = {
+static const struct sysfs_ops sysfs_class_ops = {
 	.show	= sysdev_class_show,
 	.store	= sysdev_class_store,
 };
@@ -145,13 +145,20 @@ int sysdev_class_register(struct sysdev_class *cls)
 	if (retval)
 		return retval;
 
-	return kset_register(&cls->kset);
+	retval = kset_register(&cls->kset);
+	if (!retval && cls->attrs)
+		retval = sysfs_create_files(&cls->kset.kobj,
+					    (const struct attribute **)cls->attrs);
+	return retval;
 }
 
 void sysdev_class_unregister(struct sysdev_class *cls)
 {
 	pr_debug("Unregistering sysdev class '%s'\n",
 		 kobject_name(&cls->kset.kobj));
+	if (cls->attrs)
+		sysfs_remove_files(&cls->kset.kobj,
+				   (const struct attribute **)cls->attrs);
 	kset_unregister(&cls->kset);
 }
 
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 2d5cebbbf253..e5e86a781820 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -95,7 +95,7 @@ extern char usermode_helper[];
 
 /* All EEs on the free list should have ID_VACANT (== 0)
  * freshly allocated EEs get !ID_VACANT (== 1)
- * so if it says "cannot dereference null pointer at adress 0x00000001",
+ * so if it says "cannot dereference null pointer at address 0x00000001",
  * it is most likely one of these :( */
 
 #define ID_IN_SYNC      (4711ULL)
@@ -1181,7 +1181,7 @@ extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf
 /* Meta data layout
    We reserve a 128MB Block (4k aligned)
    * either at the end of the backing device
-   * or on a seperate meta data device. */
+   * or on a separate meta data device. */
 
 #define MD_RESERVED_SECT (128LU << 11)  /* 128 MB, unit sectors */
 /* The following numbers are sectors */
diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
index f22c1bc8ec7e..16119d7056cc 100644
--- a/drivers/block/drbd/drbd_req.h
+++ b/drivers/block/drbd/drbd_req.h
@@ -57,7 +57,7 @@
  *
  *  It may me handed over to the local disk subsystem.
  *  It may be completed by the local disk subsystem,
- *    either sucessfully or with io-error.
+ *    either successfully or with io-error.
  *  In case it is a READ request, and it failed locally,
  *    it may be retried remotely.
  *
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index b9b117059b62..90c4038702da 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -144,13 +144,23 @@
  * Better audit of register_blkdev.
  */
 
-#define FLOPPY_SANITY_CHECK
 #undef  FLOPPY_SILENT_DCL_CLEAR
 
 #define REALLY_SLOW_IO
 
 #define DEBUGT 2
-#define DCL_DEBUG	/* debug disk change line */
+
+#define DPRINT(format, args...) \
+	pr_info("floppy%d: " format, current_drive, ##args)
+
+#define DCL_DEBUG		/* debug disk change line */
+#ifdef DCL_DEBUG
+#define debug_dcl(test, fmt, args...) \
+	do { if ((test) & FD_DEBUG) DPRINT(fmt, ##args); } while (0)
+#else
+#define debug_dcl(test, fmt, args...) \
+	do { if (0) DPRINT(fmt, ##args); } while (0)
+#endif
 
 /* do print messages for unexpected interrupts */
 static int print_unex = 1;
@@ -180,6 +190,8 @@ static int print_unex = 1;
 #include <linux/mod_devicetable.h>
 #include <linux/buffer_head.h>	/* for invalidate_buffers() */
 #include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
 /*
  * PS/2 floppies have much slower step rates than regular floppies.
@@ -191,8 +203,6 @@ static int slow_floppy;
 #include <asm/dma.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
 
 static int FLOPPY_IRQ = 6;
 static int FLOPPY_DMA = 2;
@@ -241,8 +251,6 @@ static int allowed_drive_mask = 0x33;
 
 static int irqdma_allocated;
 
-#define DEVICE_NAME "floppy"
-
 #include <linux/blkdev.h>
 #include <linux/blkpg.h>
 #include <linux/cdrom.h>	/* for the compatibility eject ioctl */
@@ -250,7 +258,7 @@ static int irqdma_allocated;
 
 static struct request *current_req;
 static struct request_queue *floppy_queue;
-static void do_fd_request(struct request_queue * q);
+static void do_fd_request(struct request_queue *q);
 
 #ifndef fd_get_dma_residue
 #define fd_get_dma_residue() get_dma_residue(FLOPPY_DMA)
@@ -263,7 +271,7 @@ static void do_fd_request(struct request_queue * q);
 #endif
 
 #ifndef fd_dma_mem_alloc
-#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL,get_order(size))
+#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL, get_order(size))
 #endif
 
 static inline void fallback_on_nodma_alloc(char **addr, size_t l)
@@ -273,7 +281,7 @@ static inline void fallback_on_nodma_alloc(char **addr, size_t l)
 		return;		/* we have the memory */
 	if (can_use_virtual_dma != 2)
 		return;		/* no fallback allowed */
-	printk("DMA memory shortage. Temporarily falling back on virtual DMA\n");
+	pr_info("DMA memory shortage. Temporarily falling back on virtual DMA\n");
 	*addr = (char *)nodma_mem_alloc(l);
 #else
 	return;
@@ -283,59 +291,50 @@ static inline void fallback_on_nodma_alloc(char **addr, size_t l)
 /* End dma memory related stuff */
 
 static unsigned long fake_change;
-static int initialising = 1;
+static bool initialized;
 
-#define ITYPE(x) (((x)>>2) & 0x1f)
-#define TOMINOR(x) ((x & 3) | ((x & 4) << 5))
-#define UNIT(x) ((x) & 0x03)	/* drive on fdc */
-#define FDC(x) (((x) & 0x04) >> 2)	/* fdc of drive */
+#define ITYPE(x)	(((x) >> 2) & 0x1f)
+#define TOMINOR(x)	((x & 3) | ((x & 4) << 5))
+#define UNIT(x)		((x) & 0x03)		/* drive on fdc */
+#define FDC(x)		(((x) & 0x04) >> 2)	/* fdc of drive */
 	/* reverse mapping from unit and fdc to drive */
 #define REVDRIVE(fdc, unit) ((unit) + ((fdc) << 2))
-#define DP (&drive_params[current_drive])
-#define DRS (&drive_state[current_drive])
-#define DRWE (&write_errors[current_drive])
-#define FDCS (&fdc_state[fdc])
-#define CLEARF(x) clear_bit(x##_BIT, &DRS->flags)
-#define SETF(x) set_bit(x##_BIT, &DRS->flags)
-#define TESTF(x) test_bit(x##_BIT, &DRS->flags)
 
-#define UDP (&drive_params[drive])
-#define UDRS (&drive_state[drive])
-#define UDRWE (&write_errors[drive])
-#define UFDCS (&fdc_state[FDC(drive)])
-#define UCLEARF(x) clear_bit(x##_BIT, &UDRS->flags)
-#define USETF(x) set_bit(x##_BIT, &UDRS->flags)
-#define UTESTF(x) test_bit(x##_BIT, &UDRS->flags)
+#define DP	(&drive_params[current_drive])
+#define DRS	(&drive_state[current_drive])
+#define DRWE	(&write_errors[current_drive])
+#define FDCS	(&fdc_state[fdc])
 
-#define DPRINT(format, args...) printk(DEVICE_NAME "%d: " format, current_drive , ## args)
+#define UDP	(&drive_params[drive])
+#define UDRS	(&drive_state[drive])
+#define UDRWE	(&write_errors[drive])
+#define UFDCS	(&fdc_state[FDC(drive)])
 
-#define PH_HEAD(floppy,head) (((((floppy)->stretch & 2) >>1) ^ head) << 2)
-#define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH)
-
-#define CLEARSTRUCT(x) memset((x), 0, sizeof(*(x)))
+#define PH_HEAD(floppy, head) (((((floppy)->stretch & 2) >> 1) ^ head) << 2)
+#define STRETCH(floppy)	((floppy)->stretch & FD_STRETCH)
 
 /* read/write */
-#define COMMAND raw_cmd->cmd[0]
-#define DR_SELECT raw_cmd->cmd[1]
-#define TRACK raw_cmd->cmd[2]
-#define HEAD raw_cmd->cmd[3]
-#define SECTOR raw_cmd->cmd[4]
-#define SIZECODE raw_cmd->cmd[5]
-#define SECT_PER_TRACK raw_cmd->cmd[6]
-#define GAP raw_cmd->cmd[7]
-#define SIZECODE2 raw_cmd->cmd[8]
+#define COMMAND		(raw_cmd->cmd[0])
+#define DR_SELECT	(raw_cmd->cmd[1])
+#define TRACK		(raw_cmd->cmd[2])
+#define HEAD		(raw_cmd->cmd[3])
+#define SECTOR		(raw_cmd->cmd[4])
+#define SIZECODE	(raw_cmd->cmd[5])
+#define SECT_PER_TRACK	(raw_cmd->cmd[6])
+#define GAP		(raw_cmd->cmd[7])
+#define SIZECODE2	(raw_cmd->cmd[8])
 #define NR_RW 9
 
 /* format */
-#define F_SIZECODE raw_cmd->cmd[2]
-#define F_SECT_PER_TRACK raw_cmd->cmd[3]
-#define F_GAP raw_cmd->cmd[4]
-#define F_FILL raw_cmd->cmd[5]
+#define F_SIZECODE	(raw_cmd->cmd[2])
+#define F_SECT_PER_TRACK (raw_cmd->cmd[3])
+#define F_GAP		(raw_cmd->cmd[4])
+#define F_FILL		(raw_cmd->cmd[5])
 #define NR_F 6
 
 /*
- * Maximum disk size (in kilobytes). This default is used whenever the
- * current disk size is unknown.
+ * Maximum disk size (in kilobytes).
+ * This default is used whenever the current disk size is unknown.
  * [Now it is rather a minimum]
  */
 #define MAX_DISK_SIZE 4		/* 3984 */
@@ -345,16 +344,17 @@ static int initialising = 1;
  */
 #define MAX_REPLIES 16
 static unsigned char reply_buffer[MAX_REPLIES];
-static int inr;			/* size of reply buffer, when called from interrupt */
-#define ST0 (reply_buffer[0])
-#define ST1 (reply_buffer[1])
-#define ST2 (reply_buffer[2])
-#define ST3 (reply_buffer[0])	/* result of GETSTATUS */
-#define R_TRACK (reply_buffer[3])
-#define R_HEAD (reply_buffer[4])
-#define R_SECTOR (reply_buffer[5])
-#define R_SIZECODE (reply_buffer[6])
-#define SEL_DLY (2*HZ/100)
+static int inr;		/* size of reply buffer, when called from interrupt */
+#define ST0		(reply_buffer[0])
+#define ST1		(reply_buffer[1])
+#define ST2		(reply_buffer[2])
+#define ST3		(reply_buffer[0])	/* result of GETSTATUS */
+#define R_TRACK		(reply_buffer[3])
+#define R_HEAD		(reply_buffer[4])
+#define R_SECTOR	(reply_buffer[5])
+#define R_SIZECODE	(reply_buffer[6])
+
+#define SEL_DLY		(2 * HZ / 100)
 
 /*
  * this struct defines the different floppy drive types.
@@ -505,9 +505,9 @@ static char floppy_device_name[] = "floppy";
 static int probing;
 
 /* Synchronization of FDC access. */
-#define FD_COMMAND_NONE -1
-#define FD_COMMAND_ERROR 2
-#define FD_COMMAND_OKAY 3
+#define FD_COMMAND_NONE		-1
+#define FD_COMMAND_ERROR	2
+#define FD_COMMAND_OKAY		3
 
 static volatile int command_status = FD_COMMAND_NONE;
 static unsigned long fdc_busy;
@@ -515,11 +515,6 @@ static DECLARE_WAIT_QUEUE_HEAD(fdc_wait);
 static DECLARE_WAIT_QUEUE_HEAD(command_done);
 
 #define NO_SIGNAL (!interruptible || !signal_pending(current))
-#define CALL(x) if ((x) == -EINTR) return -EINTR
-#define ECALL(x) if ((ret = (x))) return ret;
-#define _WAIT(x,i) CALL(ret=wait_til_done((x),i))
-#define WAIT(x) _WAIT((x),interruptible)
-#define IWAIT(x) _WAIT((x),1)
 
 /* Errors during formatting are counted here. */
 static int format_errors;
@@ -545,8 +540,9 @@ static int max_buffer_sectors;
 static int *errors;
 typedef void (*done_f)(int);
 static struct cont_t {
-	void (*interrupt)(void);	/* this is called after the interrupt of the
-					 * main command */
+	void (*interrupt)(void);
+				/* this is called after the interrupt of the
+				 * main command */
 	void (*redo)(void);	/* this is called to retry the operation */
 	void (*error)(void);	/* this is called to tally an error */
 	done_f done;		/* this is called to say if the operation has
@@ -571,7 +567,6 @@ static void floppy_release_irq_and_dma(void);
  * reset doesn't need to be tested before sending commands, because
  * output_byte is automatically disabled when reset is set.
  */
-#define CHECK_RESET { if (FDCS->reset){ reset_fdc(); return; } }
 static void reset_fdc(void);
 
 /*
@@ -579,9 +574,9 @@ static void reset_fdc(void);
  * information to interrupts. They are the data used for the current
  * request.
  */
-#define NO_TRACK -1
-#define NEED_1_RECAL -2
-#define NEED_2_RECAL -3
+#define NO_TRACK	-1
+#define NEED_1_RECAL	-2
+#define NEED_2_RECAL	-3
 
 static int usage_count;
 
@@ -621,39 +616,35 @@ static inline void set_debugt(void)
 	debugtimer = jiffies;
 }
 
-static inline void debugt(const char *message)
+static inline void debugt(const char *func, const char *msg)
 {
 	if (DP->flags & DEBUGT)
-		printk("%s dtime=%lu\n", message, jiffies - debugtimer);
+		pr_info("%s:%s dtime=%lu\n", func, msg, jiffies - debugtimer);
 }
 #else
 static inline void set_debugt(void) { }
-static inline void debugt(const char *message) { }
+static inline void debugt(const char *func, const char *msg) { }
 #endif /* DEBUGT */
 
-typedef void (*timeout_fn) (unsigned long);
+typedef void (*timeout_fn)(unsigned long);
 static DEFINE_TIMER(fd_timeout, floppy_shutdown, 0, 0);
 
 static const char *timeout_message;
 
-#ifdef FLOPPY_SANITY_CHECK
-static void is_alive(const char *message)
+static void is_alive(const char *func, const char *message)
 {
 	/* this routine checks whether the floppy driver is "alive" */
-	if (test_bit(0, &fdc_busy) && command_status < 2
-	    && !timer_pending(&fd_timeout)) {
-		DPRINT("timeout handler died: %s\n", message);
+	if (test_bit(0, &fdc_busy) && command_status < 2 &&
+	    !timer_pending(&fd_timeout)) {
+		DPRINT("%s: timeout handler died.  %s\n", func, message);
 	}
 }
-#endif
 
-static void (*do_floppy) (void) = NULL;
-
-#ifdef FLOPPY_SANITY_CHECK
+static void (*do_floppy)(void) = NULL;
 
 #define OLOGSIZE 20
 
-static void (*lasthandler) (void);
+static void (*lasthandler)(void);
 static unsigned long interruptjiffies;
 static unsigned long resultjiffies;
 static int resultsize;
@@ -666,12 +657,11 @@ static struct output_log {
 } output_log[OLOGSIZE];
 
 static int output_log_pos;
-#endif
 
 #define current_reqD -1
 #define MAXTIMEOUT -2
 
-static void __reschedule_timeout(int drive, const char *message, int marg)
+static void __reschedule_timeout(int drive, const char *message)
 {
 	if (drive == current_reqD)
 		drive = current_drive;
@@ -682,25 +672,22 @@ static void __reschedule_timeout(int drive, const char *message, int marg)
 	} else
 		fd_timeout.expires = jiffies + UDP->timeout;
 	add_timer(&fd_timeout);
-	if (UDP->flags & FD_DEBUG) {
-		DPRINT("reschedule timeout ");
-		printk(message, marg);
-		printk("\n");
-	}
+	if (UDP->flags & FD_DEBUG)
+		DPRINT("reschedule timeout %s\n", message);
 	timeout_message = message;
 }
 
-static void reschedule_timeout(int drive, const char *message, int marg)
+static void reschedule_timeout(int drive, const char *message)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&floppy_lock, flags);
-	__reschedule_timeout(drive, message, marg);
+	__reschedule_timeout(drive, message);
 	spin_unlock_irqrestore(&floppy_lock, flags);
 }
 
-#define INFBOUND(a,b) (a)=max_t(int, a, b)
-#define SUPBOUND(a,b) (a)=min_t(int, a, b)
+#define INFBOUND(a, b) (a) = max_t(int, a, b)
+#define SUPBOUND(a, b) (a) = min_t(int, a, b)
 
 /*
  * Bottom half floppy driver.
@@ -739,7 +726,6 @@ static int disk_change(int drive)
 {
 	int fdc = FDC(drive);
 
-#ifdef FLOPPY_SANITY_CHECK
 	if (time_before(jiffies, UDRS->select_date + UDP->select_delay))
 		DPRINT("WARNING disk change called early\n");
 	if (!(FDCS->dor & (0x10 << UNIT(drive))) ||
@@ -748,31 +734,27 @@ static int disk_change(int drive)
 		DPRINT("drive=%d fdc=%d dor=%x\n", drive, FDC(drive),
 		       (unsigned int)FDCS->dor);
 	}
-#endif
 
-#ifdef DCL_DEBUG
-	if (UDP->flags & FD_DEBUG) {
-		DPRINT("checking disk change line for drive %d\n", drive);
-		DPRINT("jiffies=%lu\n", jiffies);
-		DPRINT("disk change line=%x\n", fd_inb(FD_DIR) & 0x80);
-		DPRINT("flags=%lx\n", UDRS->flags);
-	}
-#endif
+	debug_dcl(UDP->flags,
+		  "checking disk change line for drive %d\n", drive);
+	debug_dcl(UDP->flags, "jiffies=%lu\n", jiffies);
+	debug_dcl(UDP->flags, "disk change line=%x\n", fd_inb(FD_DIR) & 0x80);
+	debug_dcl(UDP->flags, "flags=%lx\n", UDRS->flags);
+
 	if (UDP->flags & FD_BROKEN_DCL)
-		return UTESTF(FD_DISK_CHANGED);
+		return test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
 	if ((fd_inb(FD_DIR) ^ UDP->flags) & 0x80) {
-		USETF(FD_VERIFY);	/* verify write protection */
-		if (UDRS->maxblock) {
-			/* mark it changed */
-			USETF(FD_DISK_CHANGED);
-		}
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
+					/* verify write protection */
+
+		if (UDRS->maxblock)	/* mark it changed */
+			set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
 
 		/* invalidate its geometry */
 		if (UDRS->keep_data >= 0) {
 			if ((UDP->flags & FTD_MSG) &&
 			    current_type[drive] != NULL)
-				DPRINT("Disk type is undefined after "
-				       "disk change\n");
+				DPRINT("Disk type is undefined after disk change\n");
 			current_type[drive] = NULL;
 			floppy_sizes[TOMINOR(drive)] = MAX_DISK_SIZE << 1;
 		}
@@ -780,7 +762,7 @@ static int disk_change(int drive)
 		return 1;
 	} else {
 		UDRS->last_checked = jiffies;
-		UCLEARF(FD_DISK_NEWCHANGE);
+		clear_bit(FD_DISK_NEWCHANGE_BIT, &UDRS->flags);
 	}
 	return 0;
 }
@@ -790,6 +772,12 @@ static inline int is_selected(int dor, int unit)
 	return ((dor & (0x10 << unit)) && (dor & 3) == unit);
 }
 
+static bool is_ready_state(int status)
+{
+	int state = status & (STATUS_READY | STATUS_DIR | STATUS_DMA);
+	return state == STATUS_READY;
+}
+
 static int set_dor(int fdc, char mask, char data)
 {
 	unsigned char unit;
@@ -806,11 +794,8 @@ static int set_dor(int fdc, char mask, char data)
 		unit = olddor & 0x3;
 		if (is_selected(olddor, unit) && !is_selected(newdor, unit)) {
 			drive = REVDRIVE(fdc, unit);
-#ifdef DCL_DEBUG
-			if (UDP->flags & FD_DEBUG) {
-				DPRINT("calling disk change from set_dor\n");
-			}
-#endif
+			debug_dcl(UDP->flags,
+				  "calling disk change from set_dor\n");
 			disk_change(drive);
 		}
 		FDCS->dor = newdor;
@@ -834,8 +819,10 @@ static void twaddle(void)
 	DRS->select_date = jiffies;
 }
 
-/* reset all driver information about the current fdc. This is needed after
- * a reset, and after a raw command. */
+/*
+ * Reset all driver information about the current fdc.
+ * This is needed after a reset, and after a raw command.
+ */
 static void reset_fdc_info(int mode)
 {
 	int drive;
@@ -857,7 +844,7 @@ static void set_fdc(int drive)
 		current_drive = drive;
 	}
 	if (fdc != 1 && fdc != 0) {
-		printk("bad fdc value\n");
+		pr_info("bad fdc value\n");
 		return;
 	}
 	set_dor(fdc, ~0, 8);
@@ -871,11 +858,10 @@ static void set_fdc(int drive)
 }
 
 /* locks the driver */
-static int _lock_fdc(int drive, int interruptible, int line)
+static int _lock_fdc(int drive, bool interruptible, int line)
 {
 	if (!usage_count) {
-		printk(KERN_ERR
-		       "Trying to lock fdc while usage count=0 at line %d\n",
+		pr_err("Trying to lock fdc while usage count=0 at line %d\n",
 		       line);
 		return -1;
 	}
@@ -904,15 +890,13 @@ static int _lock_fdc(int drive, int interruptible, int line)
 	}
 	command_status = FD_COMMAND_NONE;
 
-	__reschedule_timeout(drive, "lock fdc", 0);
+	__reschedule_timeout(drive, "lock fdc");
 	set_fdc(drive);
 	return 0;
 }
 
-#define lock_fdc(drive,interruptible) _lock_fdc(drive,interruptible, __LINE__)
-
-#define LOCK_FDC(drive,interruptible) \
-if (lock_fdc(drive,interruptible)) return -EINTR;
+#define lock_fdc(drive, interruptible)			\
+	_lock_fdc(drive, interruptible, __LINE__)
 
 /* unlocks the driver */
 static inline void unlock_fdc(void)
@@ -924,7 +908,7 @@ static inline void unlock_fdc(void)
 		DPRINT("FDC access conflict!\n");
 
 	if (do_floppy)
-		DPRINT("device interrupt still active at FDC release: %p!\n",
+		DPRINT("device interrupt still active at FDC release: %pf!\n",
 		       do_floppy);
 	command_status = FD_COMMAND_NONE;
 	spin_lock_irqsave(&floppy_lock, flags);
@@ -1003,7 +987,7 @@ static void empty(void)
 
 static DECLARE_WORK(floppy_work, NULL);
 
-static void schedule_bh(void (*handler) (void))
+static void schedule_bh(void (*handler)(void))
 {
 	PREPARE_WORK(&floppy_work, (work_func_t)handler);
 	schedule_work(&floppy_work);
@@ -1026,11 +1010,7 @@ static void cancel_activity(void)
  * transfer */
 static void fd_watchdog(void)
 {
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from watchdog\n");
-	}
-#endif
+	debug_dcl(DP->flags, "calling disk change from watchdog\n");
 
 	if (disk_change(current_drive)) {
 		DPRINT("disk removed during i/o\n");
@@ -1039,7 +1019,7 @@ static void fd_watchdog(void)
 		reset_fdc();
 	} else {
 		del_timer(&fd_timer);
-		fd_timer.function = (timeout_fn) fd_watchdog;
+		fd_timer.function = (timeout_fn)fd_watchdog;
 		fd_timer.expires = jiffies + HZ / 10;
 		add_timer(&fd_timer);
 	}
@@ -1105,25 +1085,23 @@ static void setup_DMA(void)
 {
 	unsigned long f;
 
-#ifdef FLOPPY_SANITY_CHECK
 	if (raw_cmd->length == 0) {
 		int i;
 
-		printk("zero dma transfer size:");
+		pr_info("zero dma transfer size:");
 		for (i = 0; i < raw_cmd->cmd_count; i++)
-			printk("%x,", raw_cmd->cmd[i]);
-		printk("\n");
+			pr_cont("%x,", raw_cmd->cmd[i]);
+		pr_cont("\n");
 		cont->done(0);
 		FDCS->reset = 1;
 		return;
 	}
 	if (((unsigned long)raw_cmd->kernel_data) % 512) {
-		printk("non aligned address: %p\n", raw_cmd->kernel_data);
+		pr_info("non aligned address: %p\n", raw_cmd->kernel_data);
 		cont->done(0);
 		FDCS->reset = 1;
 		return;
 	}
-#endif
 	f = claim_dma_lock();
 	fd_disable_dma();
 #ifdef fd_dma_setup
@@ -1165,7 +1143,7 @@ static int wait_til_ready(void)
 		if (status & STATUS_READY)
 			return status;
 	}
-	if (!initialising) {
+	if (initialized) {
 		DPRINT("Getstatus times out (%x) on fdc %d\n", status, fdc);
 		show_floppy();
 	}
@@ -1176,22 +1154,21 @@ static int wait_til_ready(void)
 /* sends a command byte to the fdc */
 static int output_byte(char byte)
 {
-	int status;
+	int status = wait_til_ready();
 
-	if ((status = wait_til_ready()) < 0)
+	if (status < 0)
 		return -1;
-	if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY) {
+
+	if (is_ready_state(status)) {
 		fd_outb(byte, FD_DATA);
-#ifdef FLOPPY_SANITY_CHECK
 		output_log[output_log_pos].data = byte;
 		output_log[output_log_pos].status = status;
 		output_log[output_log_pos].jiffies = jiffies;
 		output_log_pos = (output_log_pos + 1) % OLOGSIZE;
-#endif
 		return 0;
 	}
 	FDCS->reset = 1;
-	if (!initialising) {
+	if (initialized) {
 		DPRINT("Unable to send byte %x to FDC. Fdc=%x Status=%x\n",
 		       byte, fdc, status);
 		show_floppy();
@@ -1199,8 +1176,6 @@ static int output_byte(char byte)
 	return -1;
 }
 
-#define LAST_OUT(x) if (output_byte(x)<0){ reset_fdc();return;}
-
 /* gets the response from the fdc */
 static int result(void)
 {
@@ -1208,14 +1183,13 @@ static int result(void)
 	int status = 0;
 
 	for (i = 0; i < MAX_REPLIES; i++) {
-		if ((status = wait_til_ready()) < 0)
+		status = wait_til_ready();
+		if (status < 0)
 			break;
 		status &= STATUS_DIR | STATUS_READY | STATUS_BUSY | STATUS_DMA;
 		if ((status & ~STATUS_BUSY) == STATUS_READY) {
-#ifdef FLOPPY_SANITY_CHECK
 			resultjiffies = jiffies;
 			resultsize = i;
-#endif
 			return i;
 		}
 		if (status == (STATUS_DIR | STATUS_READY | STATUS_BUSY))
@@ -1223,10 +1197,9 @@ static int result(void)
 		else
 			break;
 	}
-	if (!initialising) {
-		DPRINT
-		    ("get result error. Fdc=%d Last status=%x Read bytes=%d\n",
-		     fdc, status, i);
+	if (initialized) {
+		DPRINT("get result error. Fdc=%d Last status=%x Read bytes=%d\n",
+		       fdc, status, i);
 		show_floppy();
 	}
 	FDCS->reset = 1;
@@ -1237,12 +1210,14 @@ static int result(void)
 /* does the fdc need more output? */
 static int need_more_output(void)
 {
-	int status;
+	int status = wait_til_ready();
 
-	if ((status = wait_til_ready()) < 0)
+	if (status < 0)
 		return -1;
-	if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY)
+
+	if (is_ready_state(status))
 		return MORE_OUTPUT;
+
 	return result();
 }
 
@@ -1264,9 +1239,12 @@ static inline void perpendicular_mode(void)
 		default:
 			DPRINT("Invalid data rate for perpendicular mode!\n");
 			cont->done(0);
-			FDCS->reset = 1;	/* convenient way to return to
-						 * redo without to much hassle (deep
-						 * stack et al. */
+			FDCS->reset = 1;
+					/*
+					 * convenient way to return to
+					 * redo without too much hassle
+					 * (deep stack et al.)
+					 */
 			return;
 		}
 	} else
@@ -1366,9 +1344,9 @@ static void fdc_specify(void)
 
 	/* Convert step rate from microseconds to milliseconds and 4 bits */
 	srt = 16 - DIV_ROUND_UP(DP->srt * scale_dtr / 1000, NOMINAL_DTR);
-	if (slow_floppy) {
+	if (slow_floppy)
 		srt = srt / 4;
-	}
+
 	SUPBOUND(srt, 0xf);
 	INFBOUND(srt, 0);
 
@@ -1415,16 +1393,46 @@ static int fdc_dtr(void)
 	 * Pause 5 msec to avoid trouble. (Needs to be 2 jiffies)
 	 */
 	FDCS->dtr = raw_cmd->rate & 3;
-	return (fd_wait_for_completion(jiffies + 2UL * HZ / 100,
-				       (timeout_fn) floppy_ready));
+	return fd_wait_for_completion(jiffies + 2UL * HZ / 100,
+				      (timeout_fn)floppy_ready);
 }				/* fdc_dtr */
 
 static void tell_sector(void)
 {
-	printk(": track %d, head %d, sector %d, size %d",
-	       R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
+	pr_cont(": track %d, head %d, sector %d, size %d",
+		R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
 }				/* tell_sector */
 
+static void print_errors(void)
+{
+	DPRINT("");
+	if (ST0 & ST0_ECE) {
+		pr_cont("Recalibrate failed!");
+	} else if (ST2 & ST2_CRC) {
+		pr_cont("data CRC error");
+		tell_sector();
+	} else if (ST1 & ST1_CRC) {
+		pr_cont("CRC error");
+		tell_sector();
+	} else if ((ST1 & (ST1_MAM | ST1_ND)) ||
+		   (ST2 & ST2_MAM)) {
+		if (!probing) {
+			pr_cont("sector not found");
+			tell_sector();
+		} else
+			pr_cont("probe failed...");
+	} else if (ST2 & ST2_WC) {	/* seek error */
+		pr_cont("wrong cylinder");
+	} else if (ST2 & ST2_BC) {	/* cylinder marked as bad */
+		pr_cont("bad cylinder");
+	} else {
+		pr_cont("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
+			ST0, ST1, ST2);
+		tell_sector();
+	}
+	pr_cont("\n");
+}
+
 /*
  * OK, this error interpreting routine is called after a
  * DMA read/write has succeeded
@@ -1437,7 +1445,7 @@ static int interpret_errors(void)
 	char bad;
 
 	if (inr != 7) {
-		DPRINT("-- FDC reply error");
+		DPRINT("-- FDC reply error\n");
 		FDCS->reset = 1;
 		return 1;
 	}
@@ -1450,43 +1458,17 @@ static int interpret_errors(void)
 		bad = 1;
 		if (ST1 & ST1_WP) {
 			DPRINT("Drive is write protected\n");
-			CLEARF(FD_DISK_WRITABLE);
+			clear_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
 			cont->done(0);
 			bad = 2;
 		} else if (ST1 & ST1_ND) {
-			SETF(FD_NEED_TWADDLE);
+			set_bit(FD_NEED_TWADDLE_BIT, &DRS->flags);
 		} else if (ST1 & ST1_OR) {
 			if (DP->flags & FTD_MSG)
 				DPRINT("Over/Underrun - retrying\n");
 			bad = 0;
 		} else if (*errors >= DP->max_errors.reporting) {
-			DPRINT("");
-			if (ST0 & ST0_ECE) {
-				printk("Recalibrate failed!");
-			} else if (ST2 & ST2_CRC) {
-				printk("data CRC error");
-				tell_sector();
-			} else if (ST1 & ST1_CRC) {
-				printk("CRC error");
-				tell_sector();
-			} else if ((ST1 & (ST1_MAM | ST1_ND))
-				   || (ST2 & ST2_MAM)) {
-				if (!probing) {
-					printk("sector not found");
-					tell_sector();
-				} else
-					printk("probe failed...");
-			} else if (ST2 & ST2_WC) {	/* seek error */
-				printk("wrong cylinder");
-			} else if (ST2 & ST2_BC) {	/* cylinder marked as bad */
-				printk("bad cylinder");
-			} else {
-				printk
-				    ("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
-				     ST0, ST1, ST2);
-				tell_sector();
-			}
-			printk("\n");
+			print_errors();
 		}
 		if (ST2 & ST2_WC || ST2 & ST2_BC)
 			/* wrong cylinder => recal */
@@ -1531,9 +1513,9 @@ static void setup_rw_floppy(void)
 		 */
 		if (time_after(ready_date, jiffies + DP->select_delay)) {
 			ready_date -= DP->select_delay;
-			function = (timeout_fn) floppy_start;
+			function = (timeout_fn)floppy_start;
 		} else
-			function = (timeout_fn) setup_rw_floppy;
+			function = (timeout_fn)setup_rw_floppy;
 
 		/* wait until the floppy is spinning fast enough */
 		if (fd_wait_for_completion(ready_date, function))
@@ -1551,7 +1533,7 @@ static void setup_rw_floppy(void)
 	for (i = 0; i < raw_cmd->cmd_count; i++)
 		r |= output_byte(raw_cmd->cmd[i]);
 
-	debugt("rw_command: ");
+	debugt(__func__, "rw_command");
 
 	if (r) {
 		cont->error();
@@ -1574,7 +1556,7 @@ static int blind_seek;
  */
 static void seek_interrupt(void)
 {
-	debugt("seek interrupt:");
+	debugt(__func__, "");
 	if (inr != 2 || (ST0 & 0xF8) != 0x20) {
 		DPRINT("seek failed\n");
 		DRS->track = NEED_2_RECAL;
@@ -1583,14 +1565,11 @@ static void seek_interrupt(void)
 		return;
 	}
 	if (DRS->track >= 0 && DRS->track != ST1 && !blind_seek) {
-#ifdef DCL_DEBUG
-		if (DP->flags & FD_DEBUG) {
-			DPRINT
-			    ("clearing NEWCHANGE flag because of effective seek\n");
-			DPRINT("jiffies=%lu\n", jiffies);
-		}
-#endif
-		CLEARF(FD_DISK_NEWCHANGE);	/* effective seek */
+		debug_dcl(DP->flags,
+			  "clearing NEWCHANGE flag because of effective seek\n");
+		debug_dcl(DP->flags, "jiffies=%lu\n", jiffies);
+		clear_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
+					/* effective seek */
 		DRS->select_date = jiffies;
 	}
 	DRS->track = ST1;
@@ -1599,26 +1578,23 @@ static void seek_interrupt(void)
 
 static void check_wp(void)
 {
-	if (TESTF(FD_VERIFY)) {
-		/* check write protection */
+	if (test_bit(FD_VERIFY_BIT, &DRS->flags)) {
+					/* check write protection */
 		output_byte(FD_GETSTATUS);
 		output_byte(UNIT(current_drive));
 		if (result() != 1) {
 			FDCS->reset = 1;
 			return;
 		}
-		CLEARF(FD_VERIFY);
-		CLEARF(FD_NEED_TWADDLE);
-#ifdef DCL_DEBUG
-		if (DP->flags & FD_DEBUG) {
-			DPRINT("checking whether disk is write protected\n");
-			DPRINT("wp=%x\n", ST3 & 0x40);
-		}
-#endif
+		clear_bit(FD_VERIFY_BIT, &DRS->flags);
+		clear_bit(FD_NEED_TWADDLE_BIT, &DRS->flags);
+		debug_dcl(DP->flags,
+			  "checking whether disk is write protected\n");
+		debug_dcl(DP->flags, "wp=%x\n", ST3 & 0x40);
 		if (!(ST3 & 0x40))
-			SETF(FD_DISK_WRITABLE);
+			set_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
 		else
-			CLEARF(FD_DISK_WRITABLE);
+			clear_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
 	}
 }
 
@@ -1628,19 +1604,15 @@ static void seek_floppy(void)
 
 	blind_seek = 0;
 
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from seek\n");
-	}
-#endif
+	debug_dcl(DP->flags, "calling disk change from %s\n", __func__);
 
-	if (!TESTF(FD_DISK_NEWCHANGE) &&
+	if (!test_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags) &&
 	    disk_change(current_drive) && (raw_cmd->flags & FD_RAW_NEED_DISK)) {
 		/* the media changed flag should be cleared after the seek.
 		 * If it isn't, this means that there is really no disk in
 		 * the drive.
 		 */
-		SETF(FD_DISK_CHANGED);
+		set_bit(FD_DISK_CHANGED_BIT, &DRS->flags);
 		cont->done(0);
 		cont->redo();
 		return;
@@ -1648,7 +1620,7 @@ static void seek_floppy(void)
 	if (DRS->track <= NEED_1_RECAL) {
 		recalibrate_floppy();
 		return;
-	} else if (TESTF(FD_DISK_NEWCHANGE) &&
+	} else if (test_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags) &&
 		   (raw_cmd->flags & FD_RAW_NEED_DISK) &&
 		   (DRS->track <= NO_TRACK || DRS->track == raw_cmd->track)) {
 		/* we seek to clear the media-changed condition. Does anybody
@@ -1677,19 +1649,22 @@ static void seek_floppy(void)
 	do_floppy = seek_interrupt;
 	output_byte(FD_SEEK);
 	output_byte(UNIT(current_drive));
-	LAST_OUT(track);
-	debugt("seek command:");
+	if (output_byte(track) < 0) {
+		reset_fdc();
+		return;
+	}
+	debugt(__func__, "");
 }
 
 static void recal_interrupt(void)
 {
-	debugt("recal interrupt:");
+	debugt(__func__, "");
 	if (inr != 2)
 		FDCS->reset = 1;
 	else if (ST0 & ST0_ECE) {
 		switch (DRS->track) {
 		case NEED_1_RECAL:
-			debugt("recal interrupt need 1 recal:");
+			debugt(__func__, "need 1 recal");
 			/* after a second recalibrate, we still haven't
 			 * reached track 0. Probably no drive. Raise an
 			 * error, as failing immediately might upset
@@ -1698,25 +1673,21 @@ static void recal_interrupt(void)
 			cont->redo();
 			return;
 		case NEED_2_RECAL:
-			debugt("recal interrupt need 2 recal:");
+			debugt(__func__, "need 2 recal");
 			/* If we already did a recalibrate,
 			 * and we are not at track 0, this
 			 * means we have moved. (The only way
 			 * not to move at recalibration is to
 			 * be already at track 0.) Clear the
 			 * new change flag */
-#ifdef DCL_DEBUG
-			if (DP->flags & FD_DEBUG) {
-				DPRINT
-				    ("clearing NEWCHANGE flag because of second recalibrate\n");
-			}
-#endif
+			debug_dcl(DP->flags,
+				  "clearing NEWCHANGE flag because of second recalibrate\n");
 
-			CLEARF(FD_DISK_NEWCHANGE);
+			clear_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
 			DRS->select_date = jiffies;
 			/* fall through */
 		default:
-			debugt("recal interrupt default:");
+			debugt(__func__, "default");
 			/* Recalibrate moves the head by at
 			 * most 80 steps. If after one
 			 * recalibrate we don't have reached
@@ -1738,8 +1709,8 @@ static void print_result(char *message, int inr)
 	DPRINT("%s ", message);
 	if (inr >= 0)
 		for (i = 0; i < inr; i++)
-			printk("repl[%d]=%x ", i, reply_buffer[i]);
-	printk("\n");
+			pr_cont("repl[%d]=%x ", i, reply_buffer[i]);
+	pr_cont("\n");
 }
 
 /* interrupt handler. Note that this can be called externally on the Sparc */
@@ -1760,10 +1731,10 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
 	do_floppy = NULL;
 	if (fdc >= N_FDC || FDCS->address == -1) {
 		/* we don't even know which FDC is the culprit */
-		printk("DOR0=%x\n", fdc_state[0].dor);
-		printk("floppy interrupt on bizarre fdc %d\n", fdc);
-		printk("handler=%p\n", handler);
-		is_alive("bizarre fdc");
+		pr_info("DOR0=%x\n", fdc_state[0].dor);
+		pr_info("floppy interrupt on bizarre fdc %d\n", fdc);
+		pr_info("handler=%pf\n", handler);
+		is_alive(__func__, "bizarre fdc");
 		return IRQ_NONE;
 	}
 
@@ -1777,7 +1748,7 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
 	 * activity.
 	 */
 
-	do_print = !handler && print_unex && !initialising;
+	do_print = !handler && print_unex && initialized;
 
 	inr = result();
 	if (do_print)
@@ -1790,15 +1761,15 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
 			if (do_print)
 				print_result("sensei", inr);
 			max_sensei--;
-		} while ((ST0 & 0x83) != UNIT(current_drive) && inr == 2
-			 && max_sensei);
+		} while ((ST0 & 0x83) != UNIT(current_drive) &&
+			 inr == 2 && max_sensei);
 	}
 	if (!handler) {
 		FDCS->reset = 1;
 		return IRQ_NONE;
 	}
 	schedule_bh(handler);
-	is_alive("normal interrupt end");
+	is_alive(__func__, "normal interrupt end");
 
 	/* FIXME! Was it really for us? */
 	return IRQ_HANDLED;
@@ -1806,10 +1777,11 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
 
 static void recalibrate_floppy(void)
 {
-	debugt("recalibrate floppy:");
+	debugt(__func__, "");
 	do_floppy = recal_interrupt;
 	output_byte(FD_RECALIBRATE);
-	LAST_OUT(UNIT(current_drive));
+	if (output_byte(UNIT(current_drive)) < 0)
+		reset_fdc();
 }
 
 /*
@@ -1817,10 +1789,10 @@ static void recalibrate_floppy(void)
  */
 static void reset_interrupt(void)
 {
-	debugt("reset interrupt:");
+	debugt(__func__, "");
 	result();		/* get the status ready for set_fdc */
 	if (FDCS->reset) {
-		printk("reset set in interrupt, calling %p\n", cont->error);
+		pr_info("reset set in interrupt, calling %pf\n", cont->error);
 		cont->error();	/* a reset just after a reset. BAD! */
 	}
 	cont->redo();
@@ -1858,53 +1830,49 @@ static void show_floppy(void)
 {
 	int i;
 
-	printk("\n");
-	printk("floppy driver state\n");
-	printk("-------------------\n");
-	printk("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n",
-	       jiffies, interruptjiffies, jiffies - interruptjiffies,
-	       lasthandler);
+	pr_info("\n");
+	pr_info("floppy driver state\n");
+	pr_info("-------------------\n");
+	pr_info("now=%lu last interrupt=%lu diff=%lu last called handler=%pf\n",
+		jiffies, interruptjiffies, jiffies - interruptjiffies,
+		lasthandler);
 
-#ifdef FLOPPY_SANITY_CHECK
-	printk("timeout_message=%s\n", timeout_message);
-	printk("last output bytes:\n");
+	pr_info("timeout_message=%s\n", timeout_message);
+	pr_info("last output bytes:\n");
 	for (i = 0; i < OLOGSIZE; i++)
-		printk("%2x %2x %lu\n",
-		       output_log[(i + output_log_pos) % OLOGSIZE].data,
-		       output_log[(i + output_log_pos) % OLOGSIZE].status,
-		       output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
-	printk("last result at %lu\n", resultjiffies);
-	printk("last redo_fd_request at %lu\n", lastredo);
-	for (i = 0; i < resultsize; i++) {
-		printk("%2x ", reply_buffer[i]);
-	}
-	printk("\n");
-#endif
-
-	printk("status=%x\n", fd_inb(FD_STATUS));
-	printk("fdc_busy=%lu\n", fdc_busy);
+		pr_info("%2x %2x %lu\n",
+			output_log[(i + output_log_pos) % OLOGSIZE].data,
+			output_log[(i + output_log_pos) % OLOGSIZE].status,
+			output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
+	pr_info("last result at %lu\n", resultjiffies);
+	pr_info("last redo_fd_request at %lu\n", lastredo);
+	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1,
+		       reply_buffer, resultsize, true);
+
+	pr_info("status=%x\n", fd_inb(FD_STATUS));
+	pr_info("fdc_busy=%lu\n", fdc_busy);
 	if (do_floppy)
-		printk("do_floppy=%p\n", do_floppy);
+		pr_info("do_floppy=%pf\n", do_floppy);
 	if (work_pending(&floppy_work))
-		printk("floppy_work.func=%p\n", floppy_work.func);
+		pr_info("floppy_work.func=%pf\n", floppy_work.func);
 	if (timer_pending(&fd_timer))
-		printk("fd_timer.function=%p\n", fd_timer.function);
+		pr_info("fd_timer.function=%pf\n", fd_timer.function);
 	if (timer_pending(&fd_timeout)) {
-		printk("timer_function=%p\n", fd_timeout.function);
-		printk("expires=%lu\n", fd_timeout.expires - jiffies);
-		printk("now=%lu\n", jiffies);
-	}
-	printk("cont=%p\n", cont);
-	printk("current_req=%p\n", current_req);
-	printk("command_status=%d\n", command_status);
-	printk("\n");
+		pr_info("timer_function=%pf\n", fd_timeout.function);
+		pr_info("expires=%lu\n", fd_timeout.expires - jiffies);
+		pr_info("now=%lu\n", jiffies);
+	}
+	pr_info("cont=%p\n", cont);
+	pr_info("current_req=%p\n", current_req);
+	pr_info("command_status=%d\n", command_status);
+	pr_info("\n");
 }
 
 static void floppy_shutdown(unsigned long data)
 {
 	unsigned long flags;
 
-	if (!initialising)
+	if (initialized)
 		show_floppy();
 	cancel_activity();
 
@@ -1916,17 +1884,17 @@ static void floppy_shutdown(unsigned long data)
 
 	/* avoid dma going to a random drive after shutdown */
 
-	if (!initialising)
+	if (initialized)
 		DPRINT("floppy timeout called\n");
 	FDCS->reset = 1;
 	if (cont) {
 		cont->done(0);
 		cont->redo();	/* this will recall reset when needed */
 	} else {
-		printk("no cont in shutdown!\n");
+		pr_info("no cont in shutdown!\n");
 		process_fd_request();
 	}
-	is_alive("floppy shutdown");
+	is_alive(__func__, "");
 }
 
 /* start motor, check media-changed condition and write protection */
@@ -1954,27 +1922,26 @@ static int start_motor(void (*function)(void))
 	set_dor(fdc, mask, data);
 
 	/* wait_for_completion also schedules reset if needed. */
-	return (fd_wait_for_completion(DRS->select_date + DP->select_delay,
-				       (timeout_fn) function));
+	return fd_wait_for_completion(DRS->select_date + DP->select_delay,
+				      (timeout_fn)function);
 }
 
 static void floppy_ready(void)
 {
-	CHECK_RESET;
+	if (FDCS->reset) {
+		reset_fdc();
+		return;
+	}
 	if (start_motor(floppy_ready))
 		return;
 	if (fdc_dtr())
 		return;
 
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from floppy_ready\n");
-	}
-#endif
+	debug_dcl(DP->flags, "calling disk change from floppy_ready\n");
 	if (!(raw_cmd->flags & FD_RAW_NO_MOTOR) &&
 	    disk_change(current_drive) && !DP->select_delay)
-		twaddle();	/* this clears the dcl on certain drive/controller
-				 * combinations */
+		twaddle();	/* this clears the dcl on certain
+				 * drive/controller combinations */
 
 #ifdef fd_chose_dma_mode
 	if ((raw_cmd->flags & FD_RAW_READ) || (raw_cmd->flags & FD_RAW_WRITE)) {
@@ -1998,15 +1965,11 @@ static void floppy_ready(void)
 
 static void floppy_start(void)
 {
-	reschedule_timeout(current_reqD, "floppy start", 0);
+	reschedule_timeout(current_reqD, "floppy start");
 
 	scandrives();
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("setting NEWCHANGE in floppy_start\n");
-	}
-#endif
-	SETF(FD_DISK_NEWCHANGE);
+	debug_dcl(DP->flags, "setting NEWCHANGE in floppy_start\n");
+	set_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
 	floppy_ready();
 }
 
@@ -2026,7 +1989,7 @@ static void floppy_start(void)
 
 static void do_wakeup(void)
 {
-	reschedule_timeout(MAXTIMEOUT, "do wakeup", 0);
+	reschedule_timeout(MAXTIMEOUT, "do wakeup");
 	cont = NULL;
 	command_status += 2;
 	wake_up(&command_done);
@@ -2046,7 +2009,7 @@ static struct cont_t intr_cont = {
 	.done		= (done_f)empty
 };
 
-static int wait_til_done(void (*handler)(void), int interruptible)
+static int wait_til_done(void (*handler)(void), bool interruptible)
 {
 	int ret;
 
@@ -2064,7 +2027,7 @@ static int wait_til_done(void (*handler)(void), int interruptible)
 			if (command_status >= 2 || !NO_SIGNAL)
 				break;
 
-			is_alive("wait_til_done");
+			is_alive(__func__, "");
 			schedule();
 		}
 
@@ -2180,9 +2143,9 @@ static void format_interrupt(void)
 	cont->redo();
 }
 
-#define CODE2SIZE (ssize = ((1 << SIZECODE) + 3) >> 2)
-#define FM_MODE(x,y) ((y) & ~(((x)->rate & 0x80) >>1))
+#define FM_MODE(x, y) ((y) & ~(((x)->rate & 0x80) >> 1))
 #define CT(x) ((x) | 0xc0)
+
 static void setup_format_params(int track)
 {
 	int n;
@@ -2197,8 +2160,8 @@ static void setup_format_params(int track)
 	raw_cmd = &default_raw_cmd;
 	raw_cmd->track = track;
 
-	raw_cmd->flags = FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
-	    FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK;
+	raw_cmd->flags = (FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
+			  FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK);
 	raw_cmd->rate = _floppy->rate & 0x43;
 	raw_cmd->cmd_count = NR_F;
 	COMMAND = FM_MODE(_floppy, FD_FORMAT);
@@ -2257,7 +2220,7 @@ static void redo_format(void)
 	buffer_track = -1;
 	setup_format_params(format_req.track << STRETCH(_floppy));
 	floppy_start();
-	debugt("queue format request");
+	debugt(__func__, "queue format request");
 }
 
 static struct cont_t format_cont = {
@@ -2271,7 +2234,9 @@ static int do_format(int drive, struct format_descr *tmp_format_req)
 {
 	int ret;
 
-	LOCK_FDC(drive, 1);
+	if (lock_fdc(drive, true))
+		return -EINTR;
+
 	set_floppy(drive);
 	if (!_floppy ||
 	    _floppy->track > DP->tracks ||
@@ -2286,7 +2251,9 @@ static int do_format(int drive, struct format_descr *tmp_format_req)
 	format_errors = 0;
 	cont = &format_cont;
 	errors = &format_errors;
-	IWAIT(redo_format);
+	ret = wait_til_done(redo_format, true);
+	if (ret == -EINTR)
+		return -EINTR;
 	process_fd_request();
 	return ret;
 }
@@ -2320,12 +2287,14 @@ static void request_done(int uptodate)
 	struct request *req = current_req;
 	unsigned long flags;
 	int block;
+	char msg[sizeof("request done ") + sizeof(int) * 3];
 
 	probing = 0;
-	reschedule_timeout(MAXTIMEOUT, "request done %d", uptodate);
+	snprintf(msg, sizeof(msg), "request done %d", uptodate);
+	reschedule_timeout(MAXTIMEOUT, msg);
 
 	if (!req) {
-		printk("floppy.c: no request in request_done\n");
+		pr_info("floppy.c: no request in request_done\n");
 		return;
 	}
 
@@ -2377,7 +2346,7 @@ static void rw_interrupt(void)
 		DRS->first_read_date = jiffies;
 
 	nr_sectors = 0;
-	CODE2SIZE;
+	ssize = DIV_ROUND_UP(1 << SIZECODE, 4);
 
 	if (ST1 & ST1_EOC)
 		eoc = 1;
@@ -2393,20 +2362,18 @@ static void rw_interrupt(void)
 		       R_HEAD - HEAD) * SECT_PER_TRACK +
 		      R_SECTOR - SECTOR + eoc) << SIZECODE >> 2;
 
-#ifdef FLOPPY_SANITY_CHECK
 	if (nr_sectors / ssize >
 	    DIV_ROUND_UP(in_sector_offset + current_count_sectors, ssize)) {
 		DPRINT("long rw: %x instead of %lx\n",
 		       nr_sectors, current_count_sectors);
-		printk("rs=%d s=%d\n", R_SECTOR, SECTOR);
-		printk("rh=%d h=%d\n", R_HEAD, HEAD);
-		printk("rt=%d t=%d\n", R_TRACK, TRACK);
-		printk("heads=%d eoc=%d\n", heads, eoc);
-		printk("spt=%d st=%d ss=%d\n", SECT_PER_TRACK,
-		       fsector_t, ssize);
-		printk("in_sector_offset=%d\n", in_sector_offset);
+		pr_info("rs=%d s=%d\n", R_SECTOR, SECTOR);
+		pr_info("rh=%d h=%d\n", R_HEAD, HEAD);
+		pr_info("rt=%d t=%d\n", R_TRACK, TRACK);
+		pr_info("heads=%d eoc=%d\n", heads, eoc);
+		pr_info("spt=%d st=%d ss=%d\n",
+			SECT_PER_TRACK, fsector_t, ssize);
+		pr_info("in_sector_offset=%d\n", in_sector_offset);
 	}
-#endif
 
 	nr_sectors -= in_sector_offset;
 	INFBOUND(nr_sectors, 0);
@@ -2511,19 +2478,17 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
 					      blk_rq_sectors(current_req));
 
 	remaining = current_count_sectors << 9;
-#ifdef FLOPPY_SANITY_CHECK
 	if (remaining > blk_rq_bytes(current_req) && CT(COMMAND) == FD_WRITE) {
 		DPRINT("in copy buffer\n");
-		printk("current_count_sectors=%ld\n", current_count_sectors);
-		printk("remaining=%d\n", remaining >> 9);
-		printk("current_req->nr_sectors=%u\n",
-		       blk_rq_sectors(current_req));
-		printk("current_req->current_nr_sectors=%u\n",
-		       blk_rq_cur_sectors(current_req));
-		printk("max_sector=%d\n", max_sector);
-		printk("ssize=%d\n", ssize);
+		pr_info("current_count_sectors=%ld\n", current_count_sectors);
+		pr_info("remaining=%d\n", remaining >> 9);
+		pr_info("current_req->nr_sectors=%u\n",
+			blk_rq_sectors(current_req));
+		pr_info("current_req->current_nr_sectors=%u\n",
+			blk_rq_cur_sectors(current_req));
+		pr_info("max_sector=%d\n", max_sector);
+		pr_info("ssize=%d\n", ssize);
 	}
-#endif
 
 	buffer_max = max(max_sector, buffer_max);
 
@@ -2539,26 +2504,24 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
 		SUPBOUND(size, remaining);
 
 		buffer = page_address(bv->bv_page) + bv->bv_offset;
-#ifdef FLOPPY_SANITY_CHECK
 		if (dma_buffer + size >
 		    floppy_track_buffer + (max_buffer_sectors << 10) ||
 		    dma_buffer < floppy_track_buffer) {
 			DPRINT("buffer overrun in copy buffer %d\n",
-			       (int)((floppy_track_buffer -
-				      dma_buffer) >> 9));
-			printk("fsector_t=%d buffer_min=%d\n",
-			       fsector_t, buffer_min);
-			printk("current_count_sectors=%ld\n",
-			       current_count_sectors);
+			       (int)((floppy_track_buffer - dma_buffer) >> 9));
+			pr_info("fsector_t=%d buffer_min=%d\n",
+				fsector_t, buffer_min);
+			pr_info("current_count_sectors=%ld\n",
+				current_count_sectors);
 			if (CT(COMMAND) == FD_READ)
-				printk("read\n");
+				pr_info("read\n");
 			if (CT(COMMAND) == FD_WRITE)
-				printk("write\n");
+				pr_info("write\n");
 			break;
 		}
 		if (((unsigned long)buffer) % 512)
 			DPRINT("%p buffer not aligned\n", buffer);
-#endif
+
 		if (CT(COMMAND) == FD_READ)
 			memcpy(buffer, dma_buffer, size);
 		else
@@ -2567,13 +2530,11 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
 		remaining -= size;
 		dma_buffer += size;
 	}
-#ifdef FLOPPY_SANITY_CHECK
 	if (remaining) {
 		if (remaining > 0)
 			max_sector -= remaining >> 9;
 		DPRINT("weirdness: remaining %d\n", remaining >> 9);
 	}
-#endif
 }
 
 /* work around a bug in pseudo DMA
@@ -2593,15 +2554,14 @@ static void virtualdmabug_workaround(void)
 
 		hard_sectors = raw_cmd->length >> (7 + SIZECODE);
 		end_sector = SECTOR + hard_sectors - 1;
-#ifdef FLOPPY_SANITY_CHECK
 		if (end_sector > SECT_PER_TRACK) {
-			printk("too many sectors %d > %d\n",
-			       end_sector, SECT_PER_TRACK);
+			pr_info("too many sectors %d > %d\n",
+				end_sector, SECT_PER_TRACK);
 			return;
 		}
-#endif
-		SECT_PER_TRACK = end_sector;	/* make sure SECT_PER_TRACK points
-						 * to end of transfer */
+		SECT_PER_TRACK = end_sector;
+					/* make sure SECT_PER_TRACK
+					 * points to end of transfer */
 	}
 }
 
@@ -2624,7 +2584,7 @@ static int make_raw_rw_request(void)
 	int ssize;
 
 	if (max_buffer_sectors == 0) {
-		printk("VFS: Block I/O scheduled on unopened device\n");
+		pr_info("VFS: Block I/O scheduled on unopened device\n");
 		return 0;
 	}
 
@@ -2641,7 +2601,7 @@ static int make_raw_rw_request(void)
 		raw_cmd->flags |= FD_RAW_WRITE;
 		COMMAND = FM_MODE(_floppy, FD_WRITE);
 	} else {
-		DPRINT("make_raw_rw_request: unknown command\n");
+		DPRINT("%s: unknown command\n", __func__);
 		return 0;
 	}
 
@@ -2659,7 +2619,8 @@ static int make_raw_rw_request(void)
 	HEAD = fsector_t / _floppy->sect;
 
 	if (((_floppy->stretch & (FD_SWAPSIDES | FD_SECTBASEMASK)) ||
-	     TESTF(FD_NEED_TWADDLE)) && fsector_t < _floppy->sect)
+	     test_bit(FD_NEED_TWADDLE_BIT, &DRS->flags)) &&
+	    fsector_t < _floppy->sect)
 		max_sector = _floppy->sect;
 
 	/* 2M disks have phantom sectors on the first track */
@@ -2685,7 +2646,7 @@ static int make_raw_rw_request(void)
 	raw_cmd->track = TRACK << STRETCH(_floppy);
 	DR_SELECT = UNIT(current_drive) + PH_HEAD(_floppy, HEAD);
 	GAP = _floppy->gap;
-	CODE2SIZE;
+	ssize = DIV_ROUND_UP(1 << SIZECODE, 4);
 	SECT_PER_TRACK = _floppy->sect << 2 >> SIZECODE;
 	SECTOR = ((fsector_t % _floppy->sect) << 2 >> SIZECODE) +
 	    FD_SECTBASE(_floppy);
@@ -2730,8 +2691,10 @@ static int make_raw_rw_request(void)
 		}
 	} else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) {
 		if (CT(COMMAND) == FD_WRITE) {
-			if (fsector_t + blk_rq_sectors(current_req) > ssize &&
-			    fsector_t + blk_rq_sectors(current_req) < ssize + ssize)
+			unsigned int sectors;
+
+			sectors = fsector_t + blk_rq_sectors(current_req);
+			if (sectors > ssize && sectors < ssize + ssize)
 				max_size = ssize + ssize;
 			else
 				max_size = ssize;
@@ -2752,12 +2715,10 @@ static int make_raw_rw_request(void)
 		 * on a 64 bit machine!
 		 */
 		max_size = buffer_chain_size();
-		dma_limit =
-		    (MAX_DMA_ADDRESS -
-		     ((unsigned long)current_req->buffer)) >> 9;
-		if ((unsigned long)max_size > dma_limit) {
+		dma_limit = (MAX_DMA_ADDRESS -
+			     ((unsigned long)current_req->buffer)) >> 9;
+		if ((unsigned long)max_size > dma_limit)
 			max_size = dma_limit;
-		}
 		/* 64 kb boundaries */
 		if (CROSS_64KB(current_req->buffer, max_size << 9))
 			max_size = (K_64 -
@@ -2773,16 +2734,16 @@ static int make_raw_rw_request(void)
 		 */
 		if (!direct ||
 		    (indirect * 2 > direct * 3 &&
-		     *errors < DP->max_errors.read_track && ((!probing
-		       || (DP->read_track & (1 << DRS->probed_format)))))) {
+		     *errors < DP->max_errors.read_track &&
+		     ((!probing ||
+		       (DP->read_track & (1 << DRS->probed_format)))))) {
 			max_size = blk_rq_sectors(current_req);
 		} else {
 			raw_cmd->kernel_data = current_req->buffer;
 			raw_cmd->length = current_count_sectors << 9;
 			if (raw_cmd->length == 0) {
-				DPRINT
-				    ("zero dma transfer attempted from make_raw_request\n");
-				DPRINT("indirect=%d direct=%d fsector_t=%d",
+				DPRINT("%s: zero dma transfer attempted\n", __func__);
+				DPRINT("indirect=%d direct=%d fsector_t=%d\n",
 				       indirect, direct, fsector_t);
 				return 0;
 			}
@@ -2802,25 +2763,22 @@ static int make_raw_rw_request(void)
 	    ((CT(COMMAND) == FD_READ ||
 	      (!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
 	     max_sector > 2 * max_buffer_sectors + buffer_min &&
-	     max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
-	    /* not enough space */
-	    ) {
+	     max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)) {
+		/* not enough space */
 		buffer_track = -1;
 		buffer_drive = current_drive;
 		buffer_max = buffer_min = aligned_sector_t;
 	}
 	raw_cmd->kernel_data = floppy_track_buffer +
-	    ((aligned_sector_t - buffer_min) << 9);
+		((aligned_sector_t - buffer_min) << 9);
 
 	if (CT(COMMAND) == FD_WRITE) {
 		/* copy write buffer to track buffer.
 		 * if we get here, we know that the write
 		 * is either aligned or the data already in the buffer
 		 * (buffer will be overwritten) */
-#ifdef FLOPPY_SANITY_CHECK
 		if (in_sector_offset && buffer_track == -1)
 			DPRINT("internal error offset !=0 on write\n");
-#endif
 		buffer_track = raw_cmd->track;
 		buffer_drive = current_drive;
 		copy_buffer(ssize, max_sector,
@@ -2834,7 +2792,6 @@ static int make_raw_rw_request(void)
 	raw_cmd->length = in_sector_offset + current_count_sectors;
 	raw_cmd->length = ((raw_cmd->length - 1) | (ssize - 1)) + 1;
 	raw_cmd->length <<= 9;
-#ifdef FLOPPY_SANITY_CHECK
 	if ((raw_cmd->length < current_count_sectors << 9) ||
 	    (raw_cmd->kernel_data != current_req->buffer &&
 	     CT(COMMAND) == FD_WRITE &&
@@ -2845,19 +2802,19 @@ static int make_raw_rw_request(void)
 		DPRINT("fractionary current count b=%lx s=%lx\n",
 		       raw_cmd->length, current_count_sectors);
 		if (raw_cmd->kernel_data != current_req->buffer)
-			printk("addr=%d, length=%ld\n",
-			       (int)((raw_cmd->kernel_data -
-				      floppy_track_buffer) >> 9),
-			       current_count_sectors);
-		printk("st=%d ast=%d mse=%d msi=%d\n",
-		       fsector_t, aligned_sector_t, max_sector, max_size);
-		printk("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
-		printk("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
-		       COMMAND, SECTOR, HEAD, TRACK);
-		printk("buffer drive=%d\n", buffer_drive);
-		printk("buffer track=%d\n", buffer_track);
-		printk("buffer_min=%d\n", buffer_min);
-		printk("buffer_max=%d\n", buffer_max);
+			pr_info("addr=%d, length=%ld\n",
+				(int)((raw_cmd->kernel_data -
+				       floppy_track_buffer) >> 9),
+				current_count_sectors);
+		pr_info("st=%d ast=%d mse=%d msi=%d\n",
+			fsector_t, aligned_sector_t, max_sector, max_size);
+		pr_info("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
+		pr_info("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
+			COMMAND, SECTOR, HEAD, TRACK);
+		pr_info("buffer drive=%d\n", buffer_drive);
+		pr_info("buffer track=%d\n", buffer_track);
+		pr_info("buffer_min=%d\n", buffer_min);
+		pr_info("buffer_max=%d\n", buffer_max);
 		return 0;
 	}
 
@@ -2868,14 +2825,14 @@ static int make_raw_rw_request(void)
 		    raw_cmd->kernel_data + raw_cmd->length >
 		    floppy_track_buffer + (max_buffer_sectors << 10)) {
 			DPRINT("buffer overrun in schedule dma\n");
-			printk("fsector_t=%d buffer_min=%d current_count=%ld\n",
-			       fsector_t, buffer_min, raw_cmd->length >> 9);
-			printk("current_count_sectors=%ld\n",
-			       current_count_sectors);
+			pr_info("fsector_t=%d buffer_min=%d current_count=%ld\n",
+				fsector_t, buffer_min, raw_cmd->length >> 9);
+			pr_info("current_count_sectors=%ld\n",
+				current_count_sectors);
 			if (CT(COMMAND) == FD_READ)
-				printk("read\n");
+				pr_info("read\n");
 			if (CT(COMMAND) == FD_WRITE)
-				printk("write\n");
+				pr_info("write\n");
 			return 0;
 		}
 	} else if (raw_cmd->length > blk_rq_bytes(current_req) ||
@@ -2884,14 +2841,13 @@ static int make_raw_rw_request(void)
 		return 0;
 	} else if (raw_cmd->length < current_count_sectors << 9) {
 		DPRINT("more sectors than bytes\n");
-		printk("bytes=%ld\n", raw_cmd->length >> 9);
-		printk("sectors=%ld\n", current_count_sectors);
+		pr_info("bytes=%ld\n", raw_cmd->length >> 9);
+		pr_info("sectors=%ld\n", current_count_sectors);
 	}
 	if (raw_cmd->length == 0) {
 		DPRINT("zero dma transfer attempted from make_raw_request\n");
 		return 0;
 	}
-#endif
 
 	virtualdmabug_workaround();
 	return 2;
@@ -2899,7 +2855,6 @@ static int make_raw_rw_request(void)
 
 static void redo_fd_request(void)
 {
-#define REPEAT {request_done(0); continue; }
 	int drive;
 	int tmp;
 
@@ -2907,63 +2862,63 @@ static void redo_fd_request(void)
 	if (current_drive < N_DRIVE)
 		floppy_off(current_drive);
 
-	for (;;) {
-		if (!current_req) {
-			struct request *req;
-
-			spin_lock_irq(floppy_queue->queue_lock);
-			req = blk_fetch_request(floppy_queue);
-			spin_unlock_irq(floppy_queue->queue_lock);
-			if (!req) {
-				do_floppy = NULL;
-				unlock_fdc();
-				return;
-			}
-			current_req = req;
-		}
-		drive = (long)current_req->rq_disk->private_data;
-		set_fdc(drive);
-		reschedule_timeout(current_reqD, "redo fd request", 0);
+do_request:
+	if (!current_req) {
+		struct request *req;
 
-		set_floppy(drive);
-		raw_cmd = &default_raw_cmd;
-		raw_cmd->flags = 0;
-		if (start_motor(redo_fd_request))
+		spin_lock_irq(floppy_queue->queue_lock);
+		req = blk_fetch_request(floppy_queue);
+		spin_unlock_irq(floppy_queue->queue_lock);
+		if (!req) {
+			do_floppy = NULL;
+			unlock_fdc();
 			return;
-		disk_change(current_drive);
-		if (test_bit(current_drive, &fake_change) ||
-		    TESTF(FD_DISK_CHANGED)) {
-			DPRINT("disk absent or changed during operation\n");
-			REPEAT;
-		}
-		if (!_floppy) {	/* Autodetection */
-			if (!probing) {
-				DRS->probed_format = 0;
-				if (next_valid_format()) {
-					DPRINT("no autodetectable formats\n");
-					_floppy = NULL;
-					REPEAT;
-				}
-			}
-			probing = 1;
-			_floppy =
-			    floppy_type + DP->autodetect[DRS->probed_format];
-		} else
-			probing = 0;
-		errors = &(current_req->errors);
-		tmp = make_raw_rw_request();
-		if (tmp < 2) {
-			request_done(tmp);
-			continue;
 		}
+		current_req = req;
+	}
+	drive = (long)current_req->rq_disk->private_data;
+	set_fdc(drive);
+	reschedule_timeout(current_reqD, "redo fd request");
 
-		if (TESTF(FD_NEED_TWADDLE))
-			twaddle();
-		schedule_bh(floppy_start);
-		debugt("queue fd request");
+	set_floppy(drive);
+	raw_cmd = &default_raw_cmd;
+	raw_cmd->flags = 0;
+	if (start_motor(redo_fd_request))
 		return;
+
+	disk_change(current_drive);
+	if (test_bit(current_drive, &fake_change) ||
+	    test_bit(FD_DISK_CHANGED_BIT, &DRS->flags)) {
+		DPRINT("disk absent or changed during operation\n");
+		request_done(0);
+		goto do_request;
+	}
+	if (!_floppy) {	/* Autodetection */
+		if (!probing) {
+			DRS->probed_format = 0;
+			if (next_valid_format()) {
+				DPRINT("no autodetectable formats\n");
+				_floppy = NULL;
+				request_done(0);
+				goto do_request;
+			}
+		}
+		probing = 1;
+		_floppy = floppy_type + DP->autodetect[DRS->probed_format];
+	} else
+		probing = 0;
+	errors = &(current_req->errors);
+	tmp = make_raw_rw_request();
+	if (tmp < 2) {
+		request_done(tmp);
+		goto do_request;
 	}
-#undef REPEAT
+
+	if (test_bit(FD_NEED_TWADDLE_BIT, &DRS->flags))
+		twaddle();
+	schedule_bh(floppy_start);
+	debugt(__func__, "queue fd request");
+	return;
 }
 
 static struct cont_t rw_cont = {
@@ -2979,30 +2934,30 @@ static void process_fd_request(void)
 	schedule_bh(redo_fd_request);
 }
 
-static void do_fd_request(struct request_queue * q)
+static void do_fd_request(struct request_queue *q)
 {
 	if (max_buffer_sectors == 0) {
-		printk("VFS: do_fd_request called on non-open device\n");
+		pr_info("VFS: %s called on non-open device\n", __func__);
 		return;
 	}
 
 	if (usage_count == 0) {
-		printk("warning: usage count=0, current_req=%p exiting\n",
-		       current_req);
-		printk("sect=%ld type=%x flags=%x\n",
-		       (long)blk_rq_pos(current_req), current_req->cmd_type,
-		       current_req->cmd_flags);
+		pr_info("warning: usage count=0, current_req=%p exiting\n",
+			current_req);
+		pr_info("sect=%ld type=%x flags=%x\n",
+			(long)blk_rq_pos(current_req), current_req->cmd_type,
+			current_req->cmd_flags);
 		return;
 	}
 	if (test_bit(0, &fdc_busy)) {
 		/* fdc busy, this new request will be treated when the
 		   current one is done */
-		is_alive("do fd request, old request running");
+		is_alive(__func__, "old request running");
 		return;
 	}
-	lock_fdc(MAXTIMEOUT, 0);
+	lock_fdc(MAXTIMEOUT, false);
 	process_fd_request();
-	is_alive("do fd request");
+	is_alive(__func__, "");
 }
 
 static struct cont_t poll_cont = {
@@ -3012,24 +2967,18 @@ static struct cont_t poll_cont = {
 	.done		= generic_done
 };
 
-static int poll_drive(int interruptible, int flag)
+static int poll_drive(bool interruptible, int flag)
 {
-	int ret;
-
 	/* no auto-sense, just clear dcl */
 	raw_cmd = &default_raw_cmd;
 	raw_cmd->flags = flag;
 	raw_cmd->track = 0;
 	raw_cmd->cmd_count = 0;
 	cont = &poll_cont;
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("setting NEWCHANGE in poll_drive\n");
-	}
-#endif
-	SETF(FD_DISK_NEWCHANGE);
-	WAIT(floppy_ready);
-	return ret;
+	debug_dcl(DP->flags, "setting NEWCHANGE in poll_drive\n");
+	set_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
+
+	return wait_til_done(floppy_ready, interruptible);
 }
 
 /*
@@ -3039,7 +2988,7 @@ static int poll_drive(int interruptible, int flag)
 
 static void reset_intr(void)
 {
-	printk("weird, reset interrupt called\n");
+	pr_info("weird, reset interrupt called\n");
 }
 
 static struct cont_t reset_cont = {
@@ -3049,20 +2998,23 @@ static struct cont_t reset_cont = {
 	.done		= generic_done
 };
 
-static int user_reset_fdc(int drive, int arg, int interruptible)
+static int user_reset_fdc(int drive, int arg, bool interruptible)
 {
 	int ret;
 
-	ret = 0;
-	LOCK_FDC(drive, interruptible);
+	if (lock_fdc(drive, interruptible))
+		return -EINTR;
+
 	if (arg == FD_RESET_ALWAYS)
 		FDCS->reset = 1;
 	if (FDCS->reset) {
 		cont = &reset_cont;
-		WAIT(reset_fdc);
+		ret = wait_til_done(reset_fdc, interruptible);
+		if (ret == -EINTR)
+			return -EINTR;
 	}
 	process_fd_request();
-	return ret;
+	return 0;
 }
 
 /*
@@ -3075,17 +3027,12 @@ static inline int fd_copyout(void __user *param, const void *address,
 	return copy_to_user(param, address, size) ? -EFAULT : 0;
 }
 
-static inline int fd_copyin(void __user *param, void *address, unsigned long size)
+static inline int fd_copyin(void __user *param, void *address,
+			    unsigned long size)
 {
 	return copy_from_user(address, param, size) ? -EFAULT : 0;
 }
 
-#define _COPYOUT(x) (copy_to_user((void __user *)param, &(x), sizeof(x)) ? -EFAULT : 0)
-#define _COPYIN(x) (copy_from_user(&(x), (void __user *)param, sizeof(x)) ? -EFAULT : 0)
-
-#define COPYOUT(x) ECALL(_COPYOUT(x))
-#define COPYIN(x) ECALL(_COPYIN(x))
-
 static inline const char *drive_name(int type, int drive)
 {
 	struct floppy_struct *floppy;
@@ -3156,23 +3103,29 @@ static struct cont_t raw_cmd_cont = {
 	.done		= raw_cmd_done
 };
 
-static inline int raw_cmd_copyout(int cmd, char __user *param,
+static inline int raw_cmd_copyout(int cmd, void __user *param,
 				  struct floppy_raw_cmd *ptr)
 {
 	int ret;
 
 	while (ptr) {
-		COPYOUT(*ptr);
+		ret = copy_to_user(param, ptr, sizeof(*ptr));
+		if (ret)
+			return -EFAULT;
 		param += sizeof(struct floppy_raw_cmd);
 		if ((ptr->flags & FD_RAW_READ) && ptr->buffer_length) {
-			if (ptr->length >= 0
-			    && ptr->length <= ptr->buffer_length)
-				ECALL(fd_copyout
-				      (ptr->data, ptr->kernel_data,
-				       ptr->buffer_length - ptr->length));
+			if (ptr->length >= 0 &&
+			    ptr->length <= ptr->buffer_length) {
+				long length = ptr->buffer_length - ptr->length;
+				ret = fd_copyout(ptr->data, ptr->kernel_data,
+						 length);
+				if (ret)
+					return ret;
+			}
 		}
 		ptr = ptr->next;
 	}
+
 	return 0;
 }
 
@@ -3195,7 +3148,7 @@ static void raw_cmd_free(struct floppy_raw_cmd **ptr)
 	}
 }
 
-static inline int raw_cmd_copyin(int cmd, char __user *param,
+static inline int raw_cmd_copyin(int cmd, void __user *param,
 				 struct floppy_raw_cmd **rcmd)
 {
 	struct floppy_raw_cmd *ptr;
@@ -3203,17 +3156,19 @@ static inline int raw_cmd_copyin(int cmd, char __user *param,
 	int i;
 
 	*rcmd = NULL;
-	while (1) {
-		ptr = (struct floppy_raw_cmd *)
-		    kmalloc(sizeof(struct floppy_raw_cmd), GFP_USER);
-		if (!ptr)
-			return -ENOMEM;
-		*rcmd = ptr;
-		COPYIN(*ptr);
-		ptr->next = NULL;
-		ptr->buffer_length = 0;
-		param += sizeof(struct floppy_raw_cmd);
-		if (ptr->cmd_count > 33)
+
+loop:
+	ptr = kmalloc(sizeof(struct floppy_raw_cmd), GFP_USER);
+	if (!ptr)
+		return -ENOMEM;
+	*rcmd = ptr;
+	ret = copy_from_user(ptr, param, sizeof(*ptr));
+	if (ret)
+		return -EFAULT;
+	ptr->next = NULL;
+	ptr->buffer_length = 0;
+	param += sizeof(struct floppy_raw_cmd);
+	if (ptr->cmd_count > 33)
 			/* the command may now also take up the space
 			 * initially intended for the reply & the
 			 * reply count. Needed for long 82078 commands
@@ -3222,31 +3177,35 @@ static inline int raw_cmd_copyin(int cmd, char __user *param,
 			 * 16 bytes for a structure, you'll one day
 			 * discover that you really need 17...
 			 */
+		return -EINVAL;
+
+	for (i = 0; i < 16; i++)
+		ptr->reply[i] = 0;
+	ptr->resultcode = 0;
+	ptr->kernel_data = NULL;
+
+	if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) {
+		if (ptr->length <= 0)
 			return -EINVAL;
+		ptr->kernel_data = (char *)fd_dma_mem_alloc(ptr->length);
+		fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length);
+		if (!ptr->kernel_data)
+			return -ENOMEM;
+		ptr->buffer_length = ptr->length;
+	}
+	if (ptr->flags & FD_RAW_WRITE) {
+		ret = fd_copyin(ptr->data, ptr->kernel_data, ptr->length);
+		if (ret)
+			return ret;
+	}
 
-		for (i = 0; i < 16; i++)
-			ptr->reply[i] = 0;
-		ptr->resultcode = 0;
-		ptr->kernel_data = NULL;
-
-		if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) {
-			if (ptr->length <= 0)
-				return -EINVAL;
-			ptr->kernel_data =
-			    (char *)fd_dma_mem_alloc(ptr->length);
-			fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length);
-			if (!ptr->kernel_data)
-				return -ENOMEM;
-			ptr->buffer_length = ptr->length;
-		}
-		if (ptr->flags & FD_RAW_WRITE)
-			ECALL(fd_copyin(ptr->data, ptr->kernel_data,
-					ptr->length));
+	if (ptr->flags & FD_RAW_MORE) {
 		rcmd = &(ptr->next);
-		if (!(ptr->flags & FD_RAW_MORE))
-			return 0;
 		ptr->rate &= 0x43;
+		goto loop;
 	}
+
+	return 0;
 }
 
 static int raw_cmd_ioctl(int cmd, void __user *param)
@@ -3283,12 +3242,8 @@ static int raw_cmd_ioctl(int cmd, void __user *param)
 
 	raw_cmd = my_raw_cmd;
 	cont = &raw_cmd_cont;
-	ret = wait_til_done(floppy_start, 1);
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from raw_cmd ioctl\n");
-	}
-#endif
+	ret = wait_til_done(floppy_start, true);
+	debug_dcl(DP->flags, "calling disk change from raw_cmd ioctl\n");
 
 	if (ret != -EINTR && FDCS->reset)
 		ret = -EIO;
@@ -3327,7 +3282,7 @@ static inline int set_geometry(unsigned int cmd, struct floppy_struct *g,
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
 		mutex_lock(&open_lock);
-		if (lock_fdc(drive, 1)) {
+		if (lock_fdc(drive, true)) {
 			mutex_unlock(&open_lock);
 			return -EINTR;
 		}
@@ -3346,11 +3301,15 @@ static inline int set_geometry(unsigned int cmd, struct floppy_struct *g,
 		mutex_unlock(&open_lock);
 	} else {
 		int oldStretch;
-		LOCK_FDC(drive, 1);
-		if (cmd != FDDEFPRM)
+
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		if (cmd != FDDEFPRM) {
 			/* notice a disk change immediately, else
 			 * we lose our settings immediately*/
-			CALL(poll_drive(1, FD_RAW_NEED_DISK));
+			if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+				return -EINTR;
+		}
 		oldStretch = g->stretch;
 		user_params[drive] = *g;
 		if (buffer_drive == drive)
@@ -3415,7 +3374,7 @@ static inline int normalize_ioctl(int *cmd, int *size)
 			*size = _IOC_SIZE(*cmd);
 			*cmd = ioctl_table[i];
 			if (*size > _IOC_SIZE(*cmd)) {
-				printk("ioctl not yet supported\n");
+				pr_info("ioctl not yet supported\n");
 				return -EFAULT;
 			}
 			return 0;
@@ -3429,8 +3388,10 @@ static int get_floppy_geometry(int drive, int type, struct floppy_struct **g)
 	if (type)
 		*g = &floppy_type[type];
 	else {
-		LOCK_FDC(drive, 0);
-		CALL(poll_drive(0, 0));
+		if (lock_fdc(drive, false))
+			return -EINTR;
+		if (poll_drive(false, 0) == -EINTR)
+			return -EINTR;
 		process_fd_request();
 		*g = current_type[drive];
 	}
@@ -3459,10 +3420,6 @@ static int fd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
 		    unsigned long param)
 {
-#define FD_IOCTL_ALLOWED (mode & (FMODE_WRITE|FMODE_WRITE_IOCTL))
-#define OUT(c,x) case c: outparam = (const char *) (x); break
-#define IN(c,x,tag) case c: *(x) = inparam. tag ; return 0
-
 	int drive = (long)bdev->bd_disk->private_data;
 	int type = ITYPE(UDRS->fd_device);
 	int i;
@@ -3474,26 +3431,28 @@ static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
 		struct floppy_max_errors max_errors;
 		struct floppy_drive_params dp;
 	} inparam;		/* parameters coming from user space */
-	const char *outparam;	/* parameters passed back to user space */
+	const void *outparam;	/* parameters passed back to user space */
 
 	/* convert compatibility eject ioctls into floppy eject ioctl.
 	 * We do this in order to provide a means to eject floppy disks before
 	 * installing the new fdutils package */
 	if (cmd == CDROMEJECT ||	/* CD-ROM eject */
-	    cmd == 0x6470 /* SunOS floppy eject */ ) {
+	    cmd == 0x6470) {		/* SunOS floppy eject */
 		DPRINT("obsolete eject ioctl\n");
 		DPRINT("please use floppycontrol --eject\n");
 		cmd = FDEJECT;
 	}
 
-	/* convert the old style command into a new style command */
-	if ((cmd & 0xff00) == 0x0200) {
-		ECALL(normalize_ioctl(&cmd, &size));
-	} else
+	if (!((cmd & 0xff00) == 0x0200))
 		return -EINVAL;
 
+	/* convert the old style command into a new style command */
+	ret = normalize_ioctl(&cmd, &size);
+	if (ret)
+		return ret;
+
 	/* permission checks */
-	if (((cmd & 0x40) && !FD_IOCTL_ALLOWED) ||
+	if (((cmd & 0x40) && !(mode & (FMODE_WRITE | FMODE_WRITE_IOCTL))) ||
 	    ((cmd & 0x80) && !capable(CAP_SYS_ADMIN)))
 		return -EPERM;
 
@@ -3501,129 +3460,142 @@ static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
 		return -EINVAL;
 
 	/* copyin */
-	CLEARSTRUCT(&inparam);
-	if (_IOC_DIR(cmd) & _IOC_WRITE)
-	    ECALL(fd_copyin((void __user *)param, &inparam, size))
-
-		switch (cmd) {
-		case FDEJECT:
-			if (UDRS->fd_ref != 1)
-				/* somebody else has this drive open */
-				return -EBUSY;
-			LOCK_FDC(drive, 1);
-
-			/* do the actual eject. Fails on
-			 * non-Sparc architectures */
-			ret = fd_eject(UNIT(drive));
-
-			USETF(FD_DISK_CHANGED);
-			USETF(FD_VERIFY);
-			process_fd_request();
+	memset(&inparam, 0, sizeof(inparam));
+	if (_IOC_DIR(cmd) & _IOC_WRITE) {
+		ret = fd_copyin((void __user *)param, &inparam, size);
+		if (ret)
 			return ret;
-		case FDCLRPRM:
-			LOCK_FDC(drive, 1);
-			current_type[drive] = NULL;
-			floppy_sizes[drive] = MAX_DISK_SIZE << 1;
-			UDRS->keep_data = 0;
-			return invalidate_drive(bdev);
-		case FDSETPRM:
-		case FDDEFPRM:
-			return set_geometry(cmd, &inparam.g,
-					    drive, type, bdev);
-		case FDGETPRM:
-			ECALL(get_floppy_geometry(drive, type,
-						  (struct floppy_struct **)
-						  &outparam));
-			break;
-
-		case FDMSGON:
-			UDP->flags |= FTD_MSG;
-			return 0;
-		case FDMSGOFF:
-			UDP->flags &= ~FTD_MSG;
-			return 0;
-
-		case FDFMTBEG:
-			LOCK_FDC(drive, 1);
-			CALL(poll_drive(1, FD_RAW_NEED_DISK));
-			ret = UDRS->flags;
-			process_fd_request();
-			if (ret & FD_VERIFY)
-				return -ENODEV;
-			if (!(ret & FD_DISK_WRITABLE))
-				return -EROFS;
-			return 0;
-		case FDFMTTRK:
-			if (UDRS->fd_ref != 1)
-				return -EBUSY;
-			return do_format(drive, &inparam.f);
-		case FDFMTEND:
-		case FDFLUSH:
-			LOCK_FDC(drive, 1);
-			return invalidate_drive(bdev);
-
-		case FDSETEMSGTRESH:
-			UDP->max_errors.reporting =
-			    (unsigned short)(param & 0x0f);
-			return 0;
-			OUT(FDGETMAXERRS, &UDP->max_errors);
-			IN(FDSETMAXERRS, &UDP->max_errors, max_errors);
-
-		case FDGETDRVTYP:
-			outparam = drive_name(type, drive);
-			SUPBOUND(size, strlen(outparam) + 1);
-			break;
-
-			IN(FDSETDRVPRM, UDP, dp);
-			OUT(FDGETDRVPRM, UDP);
-
-		case FDPOLLDRVSTAT:
-			LOCK_FDC(drive, 1);
-			CALL(poll_drive(1, FD_RAW_NEED_DISK));
-			process_fd_request();
-			/* fall through */
-			OUT(FDGETDRVSTAT, UDRS);
-
-		case FDRESET:
-			return user_reset_fdc(drive, (int)param, 1);
-
-			OUT(FDGETFDCSTAT, UFDCS);
+	}
 
-		case FDWERRORCLR:
-			CLEARSTRUCT(UDRWE);
-			return 0;
-			OUT(FDWERRORGET, UDRWE);
-
-		case FDRAWCMD:
-			if (type)
-				return -EINVAL;
-			LOCK_FDC(drive, 1);
-			set_floppy(drive);
-			CALL(i = raw_cmd_ioctl(cmd, (void __user *)param));
-			process_fd_request();
-			return i;
+	switch (cmd) {
+	case FDEJECT:
+		if (UDRS->fd_ref != 1)
+			/* somebody else has this drive open */
+			return -EBUSY;
+		if (lock_fdc(drive, true))
+			return -EINTR;
 
-		case FDTWADDLE:
-			LOCK_FDC(drive, 1);
-			twaddle();
-			process_fd_request();
-			return 0;
+		/* do the actual eject. Fails on
+		 * non-Sparc architectures */
+		ret = fd_eject(UNIT(drive));
 
-		default:
+		set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
+		process_fd_request();
+		return ret;
+	case FDCLRPRM:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		current_type[drive] = NULL;
+		floppy_sizes[drive] = MAX_DISK_SIZE << 1;
+		UDRS->keep_data = 0;
+		return invalidate_drive(bdev);
+	case FDSETPRM:
+	case FDDEFPRM:
+		return set_geometry(cmd, &inparam.g, drive, type, bdev);
+	case FDGETPRM:
+		ret = get_floppy_geometry(drive, type,
+					  (struct floppy_struct **)&outparam);
+		if (ret)
+			return ret;
+		break;
+	case FDMSGON:
+		UDP->flags |= FTD_MSG;
+		return 0;
+	case FDMSGOFF:
+		UDP->flags &= ~FTD_MSG;
+		return 0;
+	case FDFMTBEG:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+			return -EINTR;
+		ret = UDRS->flags;
+		process_fd_request();
+		if (ret & FD_VERIFY)
+			return -ENODEV;
+		if (!(ret & FD_DISK_WRITABLE))
+			return -EROFS;
+		return 0;
+	case FDFMTTRK:
+		if (UDRS->fd_ref != 1)
+			return -EBUSY;
+		return do_format(drive, &inparam.f);
+	case FDFMTEND:
+	case FDFLUSH:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		return invalidate_drive(bdev);
+	case FDSETEMSGTRESH:
+		UDP->max_errors.reporting = (unsigned short)(param & 0x0f);
+		return 0;
+	case FDGETMAXERRS:
+		outparam = &UDP->max_errors;
+		break;
+	case FDSETMAXERRS:
+		UDP->max_errors = inparam.max_errors;
+		break;
+	case FDGETDRVTYP:
+		outparam = drive_name(type, drive);
+		SUPBOUND(size, strlen((const char *)outparam) + 1);
+		break;
+	case FDSETDRVPRM:
+		*UDP = inparam.dp;
+		break;
+	case FDGETDRVPRM:
+		outparam = UDP;
+		break;
+	case FDPOLLDRVSTAT:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+			return -EINTR;
+		process_fd_request();
+		/* fall through */
+	case FDGETDRVSTAT:
+		outparam = UDRS;
+		break;
+	case FDRESET:
+		return user_reset_fdc(drive, (int)param, true);
+	case FDGETFDCSTAT:
+		outparam = UFDCS;
+		break;
+	case FDWERRORCLR:
+		memset(UDRWE, 0, sizeof(*UDRWE));
+		return 0;
+	case FDWERRORGET:
+		outparam = UDRWE;
+		break;
+	case FDRAWCMD:
+		if (type)
 			return -EINVAL;
-		}
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		set_floppy(drive);
+		i = raw_cmd_ioctl(cmd, (void __user *)param);
+		if (i == -EINTR)
+			return -EINTR;
+		process_fd_request();
+		return i;
+	case FDTWADDLE:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		twaddle();
+		process_fd_request();
+		return 0;
+	default:
+		return -EINVAL;
+	}
 
 	if (_IOC_DIR(cmd) & _IOC_READ)
 		return fd_copyout((void __user *)param, outparam, size);
-	else
-		return 0;
-#undef OUT
-#undef IN
+
+	return 0;
 }
 
 static void __init config_types(void)
 {
-	int first = 1;
+	bool has_drive = false;
 	int drive;
 
 	/* read drive info out of physical CMOS */
@@ -3655,17 +3627,22 @@ static void __init config_types(void)
 			name = temparea;
 		}
 		if (name) {
-			const char *prepend = ",";
-			if (first) {
-				prepend = KERN_INFO "Floppy drive(s):";
-				first = 0;
+			const char *prepend;
+			if (!has_drive) {
+				prepend = "";
+				has_drive = true;
+				pr_info("Floppy drive(s):");
+			} else {
+				prepend = ",";
 			}
-			printk("%s fd%d is %s", prepend, drive, name);
+
+			pr_cont("%s fd%d is %s", prepend, drive, name);
 		}
 		*UDP = *params;
 	}
-	if (!first)
-		printk("\n");
+
+	if (has_drive)
+		pr_cont("\n");
 }
 
 static int floppy_release(struct gendisk *disk, fmode_t mode)
@@ -3705,8 +3682,8 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
 		goto out2;
 
 	if (!UDRS->fd_ref && (UDP->flags & FD_BROKEN_DCL)) {
-		USETF(FD_DISK_CHANGED);
-		USETF(FD_VERIFY);
+		set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
 	}
 
 	if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (mode & FMODE_EXCL)))
@@ -3735,9 +3712,8 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
 			INFBOUND(try, 16);
 			tmp = (char *)fd_dma_mem_alloc(1024 * try);
 		}
-		if (!tmp && !floppy_track_buffer) {
+		if (!tmp && !floppy_track_buffer)
 			fallback_on_nodma_alloc(&tmp, 2048 * try);
-		}
 		if (!tmp && !floppy_track_buffer) {
 			DPRINT("Unable to allocate DMA memory\n");
 			goto out;
@@ -3767,11 +3743,12 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
 		if (mode & (FMODE_READ|FMODE_WRITE)) {
 			UDRS->last_checked = 0;
 			check_disk_change(bdev);
-			if (UTESTF(FD_DISK_CHANGED))
+			if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags))
 				goto out;
 		}
 		res = -EROFS;
-		if ((mode & FMODE_WRITE) && !(UTESTF(FD_DISK_WRITABLE)))
+		if ((mode & FMODE_WRITE) &&
+		    !test_bit(FD_DISK_WRITABLE_BIT, &UDRS->flags))
 			goto out;
 	}
 	mutex_unlock(&open_lock);
@@ -3795,17 +3772,18 @@ static int check_floppy_change(struct gendisk *disk)
 {
 	int drive = (long)disk->private_data;
 
-	if (UTESTF(FD_DISK_CHANGED) || UTESTF(FD_VERIFY))
+	if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+	    test_bit(FD_VERIFY_BIT, &UDRS->flags))
 		return 1;
 
 	if (time_after(jiffies, UDRS->last_checked + UDP->checkfreq)) {
-		lock_fdc(drive, 0);
-		poll_drive(0, 0);
+		lock_fdc(drive, false);
+		poll_drive(false, 0);
 		process_fd_request();
 	}
 
-	if (UTESTF(FD_DISK_CHANGED) ||
-	    UTESTF(FD_VERIFY) ||
+	if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+	    test_bit(FD_VERIFY_BIT, &UDRS->flags) ||
 	    test_bit(drive, &fake_change) ||
 	    (!ITYPE(UDRS->fd_device) && !current_type[drive]))
 		return 1;
@@ -3818,8 +3796,7 @@ static int check_floppy_change(struct gendisk *disk)
  * a disk in the drive, and whether that disk is writable.
  */
 
-static void floppy_rb0_complete(struct bio *bio,
-			       int err)
+static void floppy_rb0_complete(struct bio *bio, int err)
 {
 	complete((struct completion *)bio->bi_private);
 }
@@ -3877,14 +3854,16 @@ static int floppy_revalidate(struct gendisk *disk)
 	int cf;
 	int res = 0;
 
-	if (UTESTF(FD_DISK_CHANGED) ||
-	    UTESTF(FD_VERIFY) || test_bit(drive, &fake_change) || NO_GEOM) {
+	if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+	    test_bit(FD_VERIFY_BIT, &UDRS->flags) ||
+	    test_bit(drive, &fake_change) || NO_GEOM) {
 		if (usage_count == 0) {
-			printk("VFS: revalidate called on non-open device.\n");
+			pr_info("VFS: revalidate called on non-open device.\n");
 			return -EFAULT;
 		}
-		lock_fdc(drive, 0);
-		cf = UTESTF(FD_DISK_CHANGED) || UTESTF(FD_VERIFY);
+		lock_fdc(drive, false);
+		cf = (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+		      test_bit(FD_VERIFY_BIT, &UDRS->flags));
 		if (!(cf || test_bit(drive, &fake_change) || NO_GEOM)) {
 			process_fd_request();	/*already done by another thread */
 			return 0;
@@ -3894,7 +3873,7 @@ static int floppy_revalidate(struct gendisk *disk)
 		if (buffer_drive == drive)
 			buffer_track = -1;
 		clear_bit(drive, &fake_change);
-		UCLEARF(FD_DISK_CHANGED);
+		clear_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
 		if (cf)
 			UDRS->generation++;
 		if (NO_GEOM) {
@@ -3902,7 +3881,7 @@ static int floppy_revalidate(struct gendisk *disk)
 			res = __floppy_read_block_0(opened_bdev[drive]);
 		} else {
 			if (cf)
-				poll_drive(0, FD_RAW_NEED_DISK);
+				poll_drive(false, FD_RAW_NEED_DISK);
 			process_fd_request();
 		}
 	}
@@ -3934,21 +3913,21 @@ static char __init get_fdc_version(void)
 	output_byte(FD_DUMPREGS);	/* 82072 and better know DUMPREGS */
 	if (FDCS->reset)
 		return FDC_NONE;
-	if ((r = result()) <= 0x00)
+	r = result();
+	if (r <= 0x00)
 		return FDC_NONE;	/* No FDC present ??? */
 	if ((r == 1) && (reply_buffer[0] == 0x80)) {
-		printk(KERN_INFO "FDC %d is an 8272A\n", fdc);
+		pr_info("FDC %d is an 8272A\n", fdc);
 		return FDC_8272A;	/* 8272a/765 don't know DUMPREGS */
 	}
 	if (r != 10) {
-		printk
-		    ("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
-		     fdc, r);
+		pr_info("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
+			fdc, r);
 		return FDC_UNKNOWN;
 	}
 
 	if (!fdc_configure()) {
-		printk(KERN_INFO "FDC %d is an 82072\n", fdc);
+		pr_info("FDC %d is an 82072\n", fdc);
 		return FDC_82072;	/* 82072 doesn't know CONFIGURE */
 	}
 
@@ -3956,52 +3935,50 @@ static char __init get_fdc_version(void)
 	if (need_more_output() == MORE_OUTPUT) {
 		output_byte(0);
 	} else {
-		printk(KERN_INFO "FDC %d is an 82072A\n", fdc);
+		pr_info("FDC %d is an 82072A\n", fdc);
 		return FDC_82072A;	/* 82072A as found on Sparcs. */
 	}
 
 	output_byte(FD_UNLOCK);
 	r = result();
 	if ((r == 1) && (reply_buffer[0] == 0x80)) {
-		printk(KERN_INFO "FDC %d is a pre-1991 82077\n", fdc);
-		return FDC_82077_ORIG;	/* Pre-1991 82077, doesn't know 
+		pr_info("FDC %d is a pre-1991 82077\n", fdc);
+		return FDC_82077_ORIG;	/* Pre-1991 82077, doesn't know
 					 * LOCK/UNLOCK */
 	}
 	if ((r != 1) || (reply_buffer[0] != 0x00)) {
-		printk("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
-		       fdc, r);
+		pr_info("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
+			fdc, r);
 		return FDC_UNKNOWN;
 	}
 	output_byte(FD_PARTID);
 	r = result();
 	if (r != 1) {
-		printk("FDC %d init: PARTID: unexpected return of %d bytes.\n",
-		       fdc, r);
+		pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n",
+			fdc, r);
 		return FDC_UNKNOWN;
 	}
 	if (reply_buffer[0] == 0x80) {
-		printk(KERN_INFO "FDC %d is a post-1991 82077\n", fdc);
+		pr_info("FDC %d is a post-1991 82077\n", fdc);
 		return FDC_82077;	/* Revised 82077AA passes all the tests */
 	}
 	switch (reply_buffer[0] >> 5) {
 	case 0x0:
 		/* Either a 82078-1 or a 82078SL running at 5Volt */
-		printk(KERN_INFO "FDC %d is an 82078.\n", fdc);
+		pr_info("FDC %d is an 82078.\n", fdc);
 		return FDC_82078;
 	case 0x1:
-		printk(KERN_INFO "FDC %d is a 44pin 82078\n", fdc);
+		pr_info("FDC %d is a 44pin 82078\n", fdc);
 		return FDC_82078;
 	case 0x2:
-		printk(KERN_INFO "FDC %d is a S82078B\n", fdc);
+		pr_info("FDC %d is a S82078B\n", fdc);
 		return FDC_S82078B;
 	case 0x3:
-		printk(KERN_INFO "FDC %d is a National Semiconductor PC87306\n",
-		       fdc);
+		pr_info("FDC %d is a National Semiconductor PC87306\n", fdc);
 		return FDC_87306;
 	default:
-		printk(KERN_INFO
-		       "FDC %d init: 82078 variant with unknown PARTID=%d.\n",
-		       fdc, reply_buffer[0] >> 5);
+		pr_info("FDC %d init: 82078 variant with unknown PARTID=%d.\n",
+			fdc, reply_buffer[0] >> 5);
 		return FDC_82078_UNKN;
 	}
 }				/* get_fdc_version */
@@ -4113,9 +4090,9 @@ static int __init floppy_setup(char *str)
 				else
 					param = config_params[i].def_param;
 				if (config_params[i].fn)
-					config_params[i].
-					    fn(ints, param,
-					       config_params[i].param2);
+					config_params[i].fn(ints, param,
+							    config_params[i].
+							    param2);
 				if (config_params[i].var) {
 					DPRINT("%s=%d\n", str, param);
 					*config_params[i].var = param;
@@ -4129,8 +4106,8 @@ static int __init floppy_setup(char *str)
 
 		DPRINT("allowed options are:");
 		for (i = 0; i < ARRAY_SIZE(config_params); i++)
-			printk(" %s", config_params[i].name);
-		printk("\n");
+			pr_cont(" %s", config_params[i].name);
+		pr_cont("\n");
 	} else
 		DPRINT("botched floppy option\n");
 	DPRINT("Read Documentation/blockdev/floppy.txt\n");
@@ -4148,7 +4125,8 @@ static ssize_t floppy_cmos_show(struct device *dev,
 	drive = p->id;
 	return sprintf(buf, "%X\n", UDP->cmos);
 }
-DEVICE_ATTR(cmos,S_IRUGO,floppy_cmos_show,NULL);
+
+DEVICE_ATTR(cmos, S_IRUGO, floppy_cmos_show, NULL);
 
 static void floppy_device_release(struct device *dev)
 {
@@ -4160,7 +4138,7 @@ static int floppy_resume(struct device *dev)
 
 	for (fdc = 0; fdc < N_FDC; fdc++)
 		if (FDCS->address != -1)
-			user_reset_fdc(-1, FD_RESET_ALWAYS, 0);
+			user_reset_fdc(-1, FD_RESET_ALWAYS, false);
 
 	return 0;
 }
@@ -4172,8 +4150,8 @@ static const struct dev_pm_ops floppy_pm_ops = {
 
 static struct platform_driver floppy_driver = {
 	.driver = {
-		.name = "floppy",
-		.pm = &floppy_pm_ops,
+		   .name = "floppy",
+		   .pm = &floppy_pm_ops,
 	},
 };
 
@@ -4245,16 +4223,16 @@ static int __init floppy_init(void)
 		else
 			floppy_sizes[i] = MAX_DISK_SIZE << 1;
 
-	reschedule_timeout(MAXTIMEOUT, "floppy init", MAXTIMEOUT);
+	reschedule_timeout(MAXTIMEOUT, "floppy init");
 	config_types();
 
 	for (i = 0; i < N_FDC; i++) {
 		fdc = i;
-		CLEARSTRUCT(FDCS);
+		memset(FDCS, 0, sizeof(*FDCS));
 		FDCS->dtr = -1;
 		FDCS->dor = 0x4;
 #if defined(__sparc__) || defined(__mc68000__)
-		/*sparcs/sun3x don't have a DOR reset which we can fall back on to */
+	/*sparcs/sun3x don't have a DOR reset which we can fall back on to */
 #ifdef __mc68000__
 		if (MACH_IS_SUN3X)
 #endif
@@ -4283,11 +4261,11 @@ static int __init floppy_init(void)
 
 	/* initialise drive state */
 	for (drive = 0; drive < N_DRIVE; drive++) {
-		CLEARSTRUCT(UDRS);
-		CLEARSTRUCT(UDRWE);
-		USETF(FD_DISK_NEWCHANGE);
-		USETF(FD_DISK_CHANGED);
-		USETF(FD_VERIFY);
+		memset(UDRS, 0, sizeof(*UDRS));
+		memset(UDRWE, 0, sizeof(*UDRWE));
+		set_bit(FD_DISK_NEWCHANGE_BIT, &UDRS->flags);
+		set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
 		UDRS->fd_device = -1;
 		floppy_track_buffer = NULL;
 		max_buffer_sectors = 0;
@@ -4307,7 +4285,7 @@ static int __init floppy_init(void)
 		if (FDCS->address == -1)
 			continue;
 		FDCS->rawcmd = 2;
-		if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
+		if (user_reset_fdc(-1, FD_RESET_ALWAYS, false)) {
 			/* free ioports reserved by floppy_grab_irq_and_dma() */
 			floppy_release_regions(fdc);
 			FDCS->address = -1;
@@ -4330,12 +4308,12 @@ static int __init floppy_init(void)
 		 * properly, so force a reset for the standard FDC clones,
 		 * to avoid interrupt garbage.
 		 */
-		user_reset_fdc(-1, FD_RESET_ALWAYS, 0);
+		user_reset_fdc(-1, FD_RESET_ALWAYS, false);
 	}
 	fdc = 0;
 	del_timer(&fd_timeout);
 	current_drive = 0;
-	initialising = 0;
+	initialized = true;
 	if (have_no_fdc) {
 		DPRINT("no floppy controllers found\n");
 		err = have_no_fdc;
@@ -4356,7 +4334,8 @@ static int __init floppy_init(void)
 		if (err)
 			goto out_flush_work;
 
-		err = device_create_file(&floppy_device[drive].dev,&dev_attr_cmos);
+		err = device_create_file(&floppy_device[drive].dev,
+					 &dev_attr_cmos);
 		if (err)
 			goto out_unreg_platform_dev;
 
@@ -4420,8 +4399,10 @@ static int floppy_request_regions(int fdc)
 	const struct io_region *p;
 
 	for (p = io_regions; p < ARRAY_END(io_regions); p++) {
-		if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
-			DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+		if (!request_region(FDCS->address + p->offset,
+				    p->size, "floppy")) {
+			DPRINT("Floppy io-port 0x%04lx in use\n",
+			       FDCS->address + p->offset);
 			floppy_release_allocated_regions(fdc, p);
 			return -EBUSY;
 		}
@@ -4512,11 +4493,9 @@ cleanup:
 static void floppy_release_irq_and_dma(void)
 {
 	int old_fdc;
-#ifdef FLOPPY_SANITY_CHECK
 #ifndef __sparc__
 	int drive;
 #endif
-#endif
 	long tmpsize;
 	unsigned long tmpaddr;
 	unsigned long flags;
@@ -4547,20 +4526,18 @@ static void floppy_release_irq_and_dma(void)
 		buffer_min = buffer_max = -1;
 		fd_dma_mem_free(tmpaddr, tmpsize);
 	}
-#ifdef FLOPPY_SANITY_CHECK
 #ifndef __sparc__
 	for (drive = 0; drive < N_FDC * 4; drive++)
 		if (timer_pending(motor_off_timer + drive))
-			printk("motor off timer %d still active\n", drive);
+			pr_info("motor off timer %d still active\n", drive);
 #endif
 
 	if (timer_pending(&fd_timeout))
-		printk("floppy timer still active:%s\n", timeout_message);
+		pr_info("floppy timer still active:%s\n", timeout_message);
 	if (timer_pending(&fd_timer))
-		printk("auxiliary floppy timer still active\n");
+		pr_info("auxiliary floppy timer still active\n");
 	if (work_pending(&floppy_work))
-		printk("work still pending\n");
-#endif
+		pr_info("work still pending\n");
 	old_fdc = fdc;
 	for (fdc = 0; fdc < N_FDC; fdc++)
 		if (FDCS->address != -1)
@@ -4577,7 +4554,9 @@ static void __init parse_floppy_cfg_string(char *cfg)
 	char *ptr;
 
 	while (*cfg) {
-		for (ptr = cfg; *cfg && *cfg != ' ' && *cfg != '\t'; cfg++) ;
+		ptr = cfg;
+		while (*cfg && *cfg != ' ' && *cfg != '\t')
+			cfg++;
 		if (*cfg) {
 			*cfg = '\0';
 			cfg++;
@@ -4625,6 +4604,7 @@ static void __exit floppy_module_exit(void)
 	/* eject disk, if any */
 	fd_eject(0);
 }
+
 module_exit(floppy_module_exit);
 
 module_param(floppy, charp, 0);
@@ -4636,9 +4616,10 @@ MODULE_LICENSE("GPL");
 
 /* This doesn't actually get used other than for module information */
 static const struct pnp_device_id floppy_pnpids[] = {
-	{ "PNP0700", 0 },
-	{ }
+	{"PNP0700", 0},
+	{}
 };
+
 MODULE_DEVICE_TABLE(pnp, floppy_pnpids);
 
 #else
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
index a808b1530b3b..eb2091aa1c19 100644
--- a/drivers/block/osdblk.c
+++ b/drivers/block/osdblk.c
@@ -476,7 +476,9 @@ static void class_osdblk_release(struct class *cls)
 	kfree(cls);
 }
 
-static ssize_t class_osdblk_list(struct class *c, char *data)
+static ssize_t class_osdblk_list(struct class *c,
+				struct class_attribute *attr,
+				char *data)
 {
 	int n = 0;
 	struct list_head *tmp;
@@ -500,7 +502,9 @@ static ssize_t class_osdblk_list(struct class *c, char *data)
 	return n;
 }
 
-static ssize_t class_osdblk_add(struct class *c, const char *buf, size_t count)
+static ssize_t class_osdblk_add(struct class *c,
+				struct class_attribute *attr,
+				const char *buf, size_t count)
 {
 	struct osdblk_device *osdev;
 	ssize_t rc;
@@ -592,7 +596,9 @@ err_out_mod:
 	return rc;
 }
 
-static ssize_t class_osdblk_remove(struct class *c, const char *buf,
+static ssize_t class_osdblk_remove(struct class *c,
+					struct class_attribute *attr,
+					const char *buf,
 					size_t count)
 {
 	struct osdblk_device *osdev = NULL;
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index b72935b8f203..39c8514442eb 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -284,7 +284,7 @@ static ssize_t kobj_pkt_store(struct kobject *kobj,
 	return len;
 }
 
-static struct sysfs_ops kobj_pkt_ops = {
+static const struct sysfs_ops kobj_pkt_ops = {
 	.show = kobj_pkt_show,
 	.store = kobj_pkt_store
 };
@@ -337,7 +337,9 @@ static void class_pktcdvd_release(struct class *cls)
 {
 	kfree(cls);
 }
-static ssize_t class_pktcdvd_show_map(struct class *c, char *data)
+static ssize_t class_pktcdvd_show_map(struct class *c,
+					struct class_attribute *attr,
+					char *data)
 {
 	int n = 0;
 	int idx;
@@ -356,7 +358,9 @@ static ssize_t class_pktcdvd_show_map(struct class *c, char *data)
 	return n;
 }
 
-static ssize_t class_pktcdvd_store_add(struct class *c, const char *buf,
+static ssize_t class_pktcdvd_store_add(struct class *c,
+					struct class_attribute *attr,
+					const char *buf,
 					size_t count)
 {
 	unsigned int major, minor;
@@ -376,7 +380,9 @@ static ssize_t class_pktcdvd_store_add(struct class *c, const char *buf,
 	return -EINVAL;
 }
 
-static ssize_t class_pktcdvd_store_remove(struct class *c, const char *buf,
+static ssize_t class_pktcdvd_store_remove(struct class *c,
+					  struct class_attribute *attr,
+					  const char *buf,
 					size_t count)
 {
 	unsigned int major, minor;
diff --git a/drivers/char/ChangeLog b/drivers/char/ChangeLog
deleted file mode 100644
index 56b8a2e76ab1..000000000000
--- a/drivers/char/ChangeLog
+++ /dev/null
@@ -1,775 +0,0 @@
-2001-08-11  Tim Waugh  <twaugh@redhat.com>
-
-	* serial.c (get_pci_port): Deal with awkward Titan cards.
-
-1998-08-26  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (rs_open): Correctly decrement the module in-use count
-		on errors.
-
-Thu Feb 19 14:24:08 1998  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (tty_name): Remove the non-reentrant (and non-SMP safe)
-		version of tty_name, and rename the reentrant _tty_name
-		function to be tty_name.
-		(tty_open): Add a warning message stating callout devices
-		are deprecated.
-
-Mon Dec  1 08:24:15 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (tty_get_baud_rate): Print a warning syslog if the
-		tty->alt_speed kludge is used; this means the system is
-		using the deprecated SPD_HI ioctls.
-
-Mon Nov 24 10:37:49 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c, esp.c, rocket.c: Change drivers to take advantage of
-	 	tty_get_baud_rate().
-	
-	* tty_io.c (tty_get_baud_rate): New function which computes the
-		correct baud rate for the tty.  More factoring out of
-		common code out of the serial driver to the high-level tty
-		functions....
-
-Sat Nov 22 07:53:36 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c, esp.c, rocket.c: Add tty->driver.break() routine, and
- 		allow high-level tty code to handle the break and soft
- 		carrier ioctls.
-	
-	* tty_ioctl.c (n_tty_ioctl): Support TIOCGSOFTCAR and
- 		TIOCSSOFTCAR, so that device drivers don't have to support
- 		it.
-
-	* serial.c (autoconfig): Change 16750 test to hopefully eliminate
-		false results by people with strange 16550As being
-		detected as 16750s.  Hopefully 16750s will still be
-		detected as 16750, and other weird UARTs won't get poorly
-		autodetected.  If this doesn't work, I'll have to disable
-		the auto identification for the 16750.
-
-	* tty_io.c (tty_hangup): Now actually do the tty hangup
-		processing during the timer processing, and disable
-		interrupts while doing the hangup processing.  This avoids
-		several nasty race conditions which happened when the
-		hangup processing was done asynchronously.
-		(tty_ioctl): Do break handling in the tty driver if
-		driver's break function is supported.  
-		(tty_flip_buffer_push): New exported function which should
-		be used by drivers to push characters in the flip buffer
-		to the tty handler.  This may either be done using a task
-		queue function for better CPU efficiency, or directly for
-		low latency operation.
-
-	* serial.c (rs_set_termios): Fix bug rs_set_termios when
-		transitioning away from B0, submitted by Stanislav
-		Voronyi. 
-
-Thu Jun 19 20:05:58 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (begin_break, end_break, rs_ioctl): Applied patch
-		to support BSD ioctls to set and clear the break
-		condition explicitly.
-
-	* console.c (scrup, scrdown, insert_line, delete_line): Applied
-		fix suggested by Aaron Tiensivu to speed up block scrolls
-		up and down.
-
-	* n_tty.c (opost_block, write_chan): Added a modified "fast
- 		console" patch which processes a block of text via
-		"cooking" efficiently.
-
-Wed Jun 18 15:25:50 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (init_dev, release_dev): Applied fix suggested by Bill
-		Hawes to prevent race conditions in the tty code.
-
-	* n_tty.c (n_tty_chars_in_buffer): Applied fix suggested by Bill
-		Hawes so that n_tty_chars_in_buffer returns the correct
-		value in the case when the tty is in cannonical mode.  (To
-		avoid a pty deadlock with telnetd.)
-
-Thu Feb 27 01:53:08 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (change_speed): Add support for the termios flag
-		CMSPAR, which allows the user to select stick parity.
-		(i.e, if PARODD is set, the parity bit is always 1; if
-		PARRODD is not set, then the parity bit is always 0).
-
-Wed Feb 26 19:03:10 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (cleanup_module): Fix memory leak when using the serial
-		driver as a module; make sure tmp_buf gets freed!
-
-Tue Feb 25 11:01:59 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (set_modem_info): Add support for setting and clearing
-		the OUT1 and OUT2 bits.  (For special case UART's, usually
-		for half-duplex.)
-		(autoconfig, change_speed): Fix TI 16750 support.
-
-Sun Feb 16 00:14:43 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (release_dev): Add sanity check to make sure there are
-		no waiters on tty->read_wait or tty->write_wait.
-
-	* serial.c (rs_init): Don't autoconfig a device if the I/O region
-		is already reserved.
-
-	* serial.c (serial_proc_info): Add support for /proc/serial.
-
-Thu Feb 13 00:49:10 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (receive_chars): When the UART repotrs an overrun
- 		condition, it does so with a valid character.  Changed to
- 		not throw away the valid character, but instead report the
-		overrun after the valid character.
-
-	* serial.c: Added new #ifdef's for some of the advanced serial
-		driver features.  A minimal driver that only supports COM
-		1/2/3/4 without sharing serial interrupts only takes 17k;
-		the full driver takes 32k.
-		
-Wed Feb 12 14:50:44 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* vt.c:
-	* pty.c: 
-	* tty_ioctl.c: 
-	* serial.c: Update routines to use the new 2.1 memory access
-	 	routines.
-
-Wed Dec  4 07:51:52 1996  Theodore Ts'o  <tytso@localhost.mit.edu>
-
-	* serial.c (change_speed): Use save_flags(); cli() and
-		restore_flags() in order to ensure we don't accidentally
-		turn on interrupts when starting up the port.
-		(startup): Move the insertion of serial structure into the
-		IRQ chain earlier into the startup processing.  Interrupts
-		should be off this whole time, but we eventually will want
-		to reduce this window.
-
-Thu Nov 21 10:05:22 1996  Theodore Ts'o  <tytso@localhost.mit.edu>
-
-	* tty_ioctl.c (tty_wait_until_sent): Always check the driver
- 		wait_until_ready routine, even if there are no characters
- 		in the xmit buffer.  (There may be charactes in the device
- 		FIFO.)
-		(n_tty_ioctl): Add new flag tty->flow_stopped which
- 		indicates whether the tty is stopped due to a request by
- 		the TCXONC ioctl (used by tcflow).  If so, don't let an
- 		incoming XOFF character restart the tty.  The tty can only
- 		be restarted by another TCXONC request.
-
-	* tty_io.c (start_tty): Don't allow the tty to be restarted if
-		tty->flow_stopped is true.
-
-	* n_tty.c (n_tty_receive_char): If tty->flow_stopped is true, and
- 		IXANY is set, don't eat a character trying to restart the
- 		tty.
-
-	* serial.c (startup): Remove need for MCR_noint from the
- 		async_struct structure.  Only turn on DTR and RTS if the
- 		baud rate is not zero.
-		(change_speed): More accurately calculate the timeout
- 		value based on the word size.  Move responsibility of
- 		hangup when speed becomes B0 to rs_set_termios()
-		(set_serial_info): When changing the UART type set the
- 		current xmit_fifo_size as well as the permanent
- 		xmit_fifo_size.
-		(rs_ioctl): Fix TCSBRK (used by tcdrain) and TCSBRKP
- 		ioctls to return EINTR if interrupted by a signal.
-		(rs_set_termios): If the baud rate changes to or from B0,
- 		this function is now responsible for setting or clearing
- 		DTR and RTS.  DTR and RTS are only be changed on the
- 		transition to or from the B0 state.
-		(rs_close): Wait for the characters to drain based on
- 		info->timeout.  At low baud rates (50 bps), it may take a
- 		long time for the FIFO to completely drain out!
-		(rs_wait_until_sent): Fixed timeout handling.  Now
- 		releases control to the scheduler, but checks frequently
- 		enough so that the function is sensitive enough to pass
- 		the timing requirements of the NIST-PCTS.
-		(block_til_ready): When opening the device, don't turn on
- 		DTR and RTS if the baud rate is B0.
-
-Thu Nov 14 00:06:09 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (autoconfig): Fix autoconfiguration problems;
-		info->flags wasn't getting initialized from the state
-		structure.  Put in more paranoid test for the 16750.
-
-Fri Nov  8 20:19:50 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* n_tty.c (n_tty_flush_buffer): Only call driver->unthrottle() if
- 		the tty was previous throttled.
-		(n_tty_set_termios, write_chan): Add changes suggested by
- 			Simon P. Allen to allow hardware cooking.
-
-	* tty_ioctl.c (set_termios): If we get a signal while waiting for
-		the tty to drain, return -EINTR.
-	
-	* serial.c (change_speed): Add support for CREAD, as required by
-	 	POSIX.
-
-Sat Nov  2 20:43:10 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c: Wholesale changes.  Added support for the Startech
- 		16650 and 16650V2 chips.  (WARNING: the new startech
- 		16650A may or may not work!)  Added support for the
- 		TI16750 (not yet tested).  Split async_struct into a
- 		transient part (async_struct) and a permanent part
-		(serial_state) which contains the configuration
- 		information for the ports.  Added new driver routines
- 		wait_until_sent() and send_xchar() to help with POSIX
- 		compliance.  Added support for radio clocks which waggle
-		the carrier detect line (CONFIG_HARD_PPS).
-	
-	* tty_ioctl.c (tty_wait_until_sent): Added call to new driver
-		function tty->driver.wait_until_sent(), which returns when
-		the tty's device xmit buffers are drained.  Needed for
-		full POSIX compliance.
-
-		(send_prio_char): New function, called by the ioctl's
-		TCIOFF and TCION; uses the new driver call send_xchar(),
-		which will send the XON or XOFF character at high priority
-		(and even if tty output is stopped).
-
-Wed Jun  5 18:52:04 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* pty.c (pty_close): When closing a pty, make sure packet mode is
-	 	cleared.
-
-Sun May 26 09:33:52 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* vesa_blank.c (set_vesa_blanking): Add missing verify_area() call.
-
-	* selection.c (set_selection): Add missing verify_area() call.
-
-	* tty_io.c (tty_ioctl): Add missing verify_area() calls.
-
-	* serial.c (rs_ioctl): Add missing verify_area() calls.
-		(rs_init): Allow initialization of serial driver
-		configuration from a module.
-
-	* random.c (extract_entropy): Add missing verify_area call.
-		Don't limit number of characters returned to
-		32,768. Extract entropy is now no longer a inlined
-		function.
-
-		(random_read): Check return value in case extract_entropy
-		returns an error.
-
-		(secure_tcp_sequence_number): New function which returns a
-		secure TCP sequence number.  This is needed to prevent some
-		nasty TCP hijacking attacks.
-	
-		(init_std_data): Initialize using gettimeofday() instead of
-		struct timeval xtime.
-
-		(fast_add_entropy_word, add_entropy_word): Rename the
-		inline function add_entropy_word() to
-		fast_add_entropy_word().  Make add_entropy_word() be the
-		non-inlined function which is used in non-timing critical
-		places, in order to save space.
-
-		(initialize_benchmark, begin_benchmark, end_benchmark): New
-		functions defined when RANDOM_BENCHMARK is defined.  They
-		allow us to benchmark the speed of the
-		add_timer_randomness() call.
-
-		(int_ln, rotate_left): Add two new inline functions with
-		i386 optimized asm instructions.  This speeds up the
-		critical add_entropy_word() and add_timer_randomness()
-		functions, which are called from interrupt handlers.
-
-Tue May  7 22:51:11 1996    <tytso@rsts-11.mit.edu>
-
-	* random.c (add_timer_randomness): Limit the amount randomness
-		that we estimate to 12 bits.  (An arbitrary amount).
-
-		(extract_entropy): To make it harder to analyze the hash
-		function, fold the hash function in half using XOR, and
-		use the folded result as the value to emit to the user.
-		Also, add timer randomness each pass through the
-		exact_entropy call, to increase the amount of unknown
-		values during the extraction process.
-
-		(random_ioctl): Use IOR/IOW definitions to define the
-		ioctl values used by the /dev/random driver.  Allow the
-		old ioctl values to be used for backwards compatibility
-		(for a limited amount of time).
-
-Wed Apr 24 14:02:04 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* random.c (add_timer_randomness): Use 2nd derivative as well to
-		better estimate entropy.
-
-		(rand_initialize): Explicitly initialize all the pointers
-		to NULL.  (Clearing pointers using memset isn't portable.)
-		Initialize the random pool with OS-dependent data.
-
-		(random_write): Add sanity checking to the arguments to
-		random_write(), so that bad arguments won't cause a kernel
-		SEGV. 
-
-		(random_read): Update the access time of the device inode
-		when you return data to the user.
-
-		(random_ioctl): Wake up the random_wait channel when there
-		are only WAIT_INPUT_BITS available.  Add more paranoia
-		checks to make sure entropy_count doesn't go beyond the
-		bounds of (0, POOLSIZE).  Add a few missing verify_area
-		checks.  Add support for the RNDCLEARPOOL ioctl, which
-		zaps the random pool.
-
-		(add_timer_randomness): Wake up the random_wait
-		channel only when there are WAIT_INPUT_BITS available.
-
-		(random_select): Allow a random refresh daemon process to
-		select on /dev/random for writing; wake up the daemon when
-		there are less than WAIT_OUTPUT_BITS bits of randomness
-		available.
-
-Tue Apr 23 22:56:07 1996    <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (init_dev): Change return code when user attempts to
-		open master pty which is already open from EAGAIN to EIO,
-		to match with BSD expectations.  EIO is more correct
-		anyway, since EAGAIN implies that retrying will be
-		successful --- which it might be.... Eventually!!
-
-	* pty.c (pty_open, pty_close): Fix wait loop so that we don't
-		busy loop while waiting for the master side to open.
-		Fix tty opening/closing logic.  TTY_SLAVE_CLOSED was
-		renamed to TTY_OTHER_CLOSED, so that the name is more
-		descriptive.  Also fixed code so that the tty flag
-		actually works correctly now....
-
-Mon Apr  1 10:22:01 1996    <tytso@rsts-11.mit.edu>
-
-	* serial.c (rs_close): Cleaned up modularization changes.
-		Remove code which forced line discipline back to N_TTY
-		this is done in the tty upper layers, and there's no
-		reason to do it here.  (Making this change also
-		removed the requirement that the serial module access
-		the internal kernel symbol "ldiscs".)
-
-	* tty_io.c (tty_init): Formally register a tty_driver entry for
-		/dev/tty (device 4, 0) and /dev/console (device 5, 0).
-		This guarantees that major device numbers 4 and 5 will be
-		reserved for the tty subsystem (as they have to be because
-		of /dev/tty and /dev/console).  Removed tty_regdev, as
-		this interface is no longer necessary.
-
-Sun Mar 17 20:42:47 GMT 1996 <ah@doc.ic.ac.uk>
-
-	* serial.c : modularisation (changes in linux/fs/device.c allow
-		kerneld to automatically load the serial module).
-
-	* Makefile, Config.in : serial modularisation adds.
-
-	* tty_io.c : tty_init_ctty used by to register "cua" driver just
-		for the /dev/tty device (5,0).  Added tty_regdev.
-	
-	* serial.c (shutdown, rs_ioctl) : when port shuts down wakeup processes
-	  waiting on delta_msr_wait. The TIOCMIWAIT ioctl returns EIO
-	  if no change was done since the time of call.
-
-Sat Mar 16 14:33:13 1996 <aeb@cwi.nl>
-
-	* tty_io.c (disassociate_ctty): If disassociate_ctty is called by
-		exit, do not perform an implicit vhangup on a pty.
-
-Fri Feb  9 14:15:47 1996    <tytso@rsts-11.mit.edu>
-
-	* serial.c (block_til_ready): Fixed another race condition which
-		happens if a hangup happens during the open.
-
-Wed Jan 10 10:08:00 1996    <tytso@rsts-11.mit.edu>
-
-	* serial.c (block_til_ready): Remove race condition which happened
-		if a hangup condition happened during the setup of the
-		UART, before rs_open() called block_til_ready().  This
-		caused the info->count counter to be erroneously
-		decremented.
-
-	* serial.c (startup, rs_open): Remove race condition that could
-		cause a memory leak of one page.  (Fortunately, both race
-		conditions were relatively rare in practice.)
-
-Tue Dec  5 13:21:27 1995    <tytso@rsts-11.mit.edu>
-
-	* serial.c (check_modem_status, rs_ioctl): Support the new
-		ioctl()'s TIOCGICOUNT, TIOCMIWAIT.  These allow an
-		application program to wait on a modem serial register
-		status bit change, and to find out how many changes have
-		taken place for the MSR bits.
-
-		(rs_write): Eliminate a race condition which is introduced
-		if it is necessary to wait for the semaphore.
-
-Sat Nov  4 17:14:45 1995    <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (tty_init): Move registration of TTY_MAJOR and
-		TTY_AUX_MAJOR to the end, so that /proc/devices looks
-		prettier. 
-
-	* pty.c (pty_init): Use new major numbers for PTY master and slave
-		devices.  This allow us to have more than 64 pty's.  We
-		register the old pty devices for backwards compatibility.
-		Note that a system should either be using the old pty
-		devices or the new pty devices --- in general, it should
-		try to use both, since they map into the same pty table.
-		The old pty devices are strictly for backwards compatibility.
-
-Wed Oct 11 12:45:24 1995    <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (disassociate_ctty): If disassociate_ctty is called by
-		exit, perform an implicit vhangup on the tty.
-
-	* pty.c (pty_close): When the master pty is closed, send a hangup
-		to the slave pty.
-		(pty_open): Use the flag TTY_SLAVE_CLOSED to test to see
-		if there are any open slave ptys, instead of using
-		tty->link->count.  The old method got confused if there
-		were processes that had hung-up file descriptors on the
-		slave tty.
-
-Tue May  2 00:53:25 1995    <tytso@rsx-11.mit.edu>
-
-	* tty_io.c (tty_set_ldisc): Wait until the output buffer is
-		drained before closing the old line discipline --- needed
-		in only one case: XON/XOFF processing.
-
-	* n_tty.c (n_tty_close): Don't bother waiting until the output
-		driver is closed; in general, the line discipline
-		shouldn't care if the hardware is finished
-		transmitting before the line discipline terminates.
-
-	* tty_io.c (release_dev): Shutdown the line discipline after
-		decrementing the tty count variable; but set the
-		TTY_CLOSING flag so that we know that this tty structure
-		isn't long for this world.
-
-	* tty_io.c (init_dev): Add sanity code to check to see if
-		TTY_CLOSING is set on a tty structure; if so, something
-		bad has happened (probably a line discipline close blocked
-		when it shouldn't have; so do a kernel printk and then
-		return an error).
-
-Wed Apr 26 10:23:44 1995  Theodore Y. Ts'o  <tytso@localhost>
-
-	* tty_io.c (release_dev): Try to shutdown the line discipline
-		*before* decrementing the tty count variable; this removes
-		a potential race condition which occurs when the line
-		discipline close blocks, and another process then tries
-		open the same serial port.
-
-	* serial.c (rs_hangup): When hanging up, flush the output buffer
-		before shutting down the UART.  Otherwise the line
-		discipline close blocks waiting for the characters to get
-		flushed, which never happens until the serial port gets reused.
-
-Wed Apr 12 08:06:16 1995  Theodore Y. Ts'o  <tytso@localhost>
-
-	* serial.c (do_serial_hangup, do_softint, check_modem_status,
-		rs_init):  Hangups are now scheduled via a separate tqueue
-		structure in the async_struct structure, tqueue_hangup.
-		This task is pushed on to the tq_schedule queue, so that
-		it is processed synchronously by the scheduler.
-
-Sat Feb 18 12:13:51 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (disassociate_ctty, tty_open, tty_ioctl): Clear
-		current->tty_old_pgrp field when a session leader
-		acquires a controlling tty, and after a session leader
-		has disassociated from a controlling tty.
-
-Fri Feb 17 09:34:09 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_interrupt_single, rs_interrupt, rs_interrupt_multi): 
-		Change the number of passes made from 64 to be 256,
-		configurable with the #define RS_ISR_PASS_LIMIT.
-
-	* serial.c (rs_init, set_serial_info, get_serial_info, rs_close):
-		Remove support for closing_wait2.  Instead, set
-		tty->closing and rely on the line discipline to prevent
-		echo wars.
-
-	* n_tty.c (n_tty_receive_char):  IEXTEN does not need to be
-		enabled in order for IXANY to be active.
-
-		If tty->closing is set, then only process XON and XOFF
-                characters.
-
-Sun Feb 12 23:57:48 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_timer): Change the interrupt poll time from 60
-		seconds to 10 seconds, configurable with the #define
-		RS_STROBE_TIME.
-
-	* serial.c (rs_interrupt_multi, startup, shutdown, rs_ioctl,
-		set_multiport_struct, get_multiport_struct): Add
-		provisions for a new type of interrupt service routine,
-		which better supports multiple serial ports on a single
-		IRQ.  
-
-Sun Feb  5 19:35:11 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_ioctl.c (n_tty_ioctl, set_termios, tty_wait_until_sent): 
-	* serial.c (rs_ioctl, rs_close): 
-	* cyclades.c (cy_ioctl, cy_close): 
-	* n_tty.c (n_tty_close):  Rename wait_until_sent to
-		tty_wait_until_sent, so that it's a better name to export
-		in ksyms.c.
-
-Sat Feb  4 23:36:20 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_close): Added missing check for closing_wait2 being
-		ASYNC_CLOSING_WAIT_NONE.
-
-Thu Jan 26 09:02:49 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_init, set_serial_info, get_serial_info,
-		rs_close): Support close_wait in the serial driver.
-		This is helpful for slow devices (like serial
-		plotters) so that their outputs don't get flushed upon
-		device close.  This has to be configurable because
-		normally we don't want ports to be hung up for long
-		periods of time during a close when they are not
-		connected to a device, or the device is powered off.
-
-		The default is to wait 30 seconds; in the case of a
-		very slow device, the close_wait timeout should be
-		lengthened.  If it is set to 0, the kernel will wait
-		forever for all of the data to be transmitted.
-
-Thu Jan 17 01:17:20 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (startup, change_speed, rs_init): Add support to detect
-		the StarTech 16650 chip.  Treat it as a 16450 for now,
-		because of its FIFO bugs.
-
-Thu Jan  5 21:21:57 1995  <dahinds@users.sourceforge.net>
-
-	* serial.c: (receive_char): Added counter to prevent infinite loop
-		when a PCMCIA serial device is ejected.
-
-Thu Dec 29 17:53:48 1994    <tytso@rsx-11.mit.edu>
-
-	* tty_io.c (check_tty_count): New procedure which checks
-		tty->count to make sure that it matches with the number of
-		open file descriptors which point at the structure.  If
-		the number doesn't match, it prints a warning message.
-
-Wed Dec 28 15:41:51 1994    <tytso@rsx-11.mit.edu>
-
-	* tty_io.c (do_tty_hangup, disassociate_ctty): At hangup time,
-		save the tty's current foreground process group in the
-		session leader's task structure.  When the session leader
-		terminates, send a SIGHUP, SIGCONT to that process group.
-		This is not required by POSIX, but it's not prohibited
-		either, and it appears to be the least intrusive way
-		to fix a problem that dialup servers have with
-		orphaned process groups caused by modem hangups.
-
-Thu Dec  8 14:52:11 1994    <tytso@rsx-11.mit.edu>
-
-	* serial.c (rs_ioctl): Don't allow most ioctl's if the serial port
-		isn't initialized.
-
-	* serial.c (rs_close): Don't clear the IER if the serial port
-		isn't initialized. 
-
-	* serial.c (block_til_ready): Don't try to block on the dialin
-		port if the serial port isn't initialized.
-
-Wed Dec  7 10:48:30 1994  Si Park (si@wimpol.demon.co.uk)
-	* tty_io.c (tty_register_driver): Fix bug when linking onto
-		the tty_drivers list. We now test that there are elements
-		already on the list before setting the back link from the
-		first element to the new driver.
-
-	* tty_io.c (tty_unregister_driver): Fix bug in unlinking the
-		specified driver from the tty_drivers list. We were not
-		setting the back link correctly. This used to result in
-		a dangling back link pointer and cause panics on the next
-		call to get_tty_driver().
-
-Tue Nov 29 10:21:09 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_unregister_driver): Fix bug in
-		tty_unregister_driver where the pointer to the refcount is
-		tested, instead of the refcount itself.  This caused
-		tty_unregister_driver to always return EBUSY.
-
-Sat Nov 26 11:59:24 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_ioctl): Add support for the new ioctl
-		TIOCTTYGSTRUCT, which allow a kernel debugging program
-		direct read access to the tty and tty_driver structures.
-
-Fri Nov 25 17:26:22 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_set_termios): Don't wake up processes blocked in
-		open when the CLOCAL flag changes, since a blocking
-		open only samples the CLOCAL flag once when it blocks,
-		and doesn't check it again.  (n.b.  FreeBSD has a
-		different behavior for blocking opens; it's not clear
-		whether Linux or FreeBSD's interpretation is correct.
-		POSIX doesn't give clear guidance on this issue, so
-		this may change in the future....)
-
-	* serial.c (block_til_ready): Use the correct termios structure to
-		check the CLOCAL flag.  If the cuaXX device is active,
-		then check the saved termios for the ttySXX device.
-		Otherwise, use the currently active termios structure.
-
-Sun Nov  6 21:05:44 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (change_speed): Add support for direct access of
-		57,600 and 115,200 bps.
-
-Wed Nov  2 10:32:36 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* n_tty.c (n_tty_receive_room): Only allow excess characters
-		through if we are in ICANON mode *and* there are other no
-		pending lines in the buffer.  Otherwise cut and paste over
-		4k breaks.
-
-Sat Oct 29 18:17:34 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_ioctl, get_lsr_info): Added patch suggested by Arne
-		Riiber so that user mode programs can tell when the
-		transmitter shift register is empty.
-
-Thu Oct 27 23:14:29 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_ioctl.c (wait_until_sent): Added debugging printk statements
-		(under the #ifdef TTY_DEBUG_WAIT_UNTIL_SENT)  
-
-	* serial.c (rs_interrupt, rs_interrupt_single, receive_chars,
-		change_speed, rs_close): rs_close now disables receiver
-		interrupts when closing the serial port.  This allows the
-		serial port to close quickly when Linux and a modem (or a
-		mouse) are engaged in an echo war; when closing the serial
-		port, we now first stop listening to incoming characters,
-		and *then* wait for the transmit buffer to drain.  
-
-		In order to make this change, the info->read_status_mask
-		is now used to control what bits of the line status
-		register are looked at in the interrupt routine in all
-		cases; previously it was only used in receive_chars to
-		select a few of the status bits.
-
-Mon Oct 24 23:36:21 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_close): Add a timeout to the transmitter flush
-		loop; this is just a sanity check in case we have flaky
-		(or non-existent-but-configured-by-the-user) hardware.
-
-Fri Oct 21 09:37:23 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_fasync): When asynchronous I/O is enabled, if the
-		process or process group has not be specified yet, set it
-		to be the tty's process group, or if that is not yet set,
-		to the current process's pid.
-
-Thu Oct 20 23:17:28 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* n_tty.c (n_tty_receive_room): If we are doing input
-		canonicalization, let as many characters through as
-		possible, so that the excess characters can be "beeped".
-
-Tue Oct 18 10:02:43 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_start): Removed an incorrect '!' that was
-		preventing transmit interrupts from being re-enabled in
-		rs_start().  Fortunately in most cases it would be
-		re-enabled elsewhere, but this still should be fixed
-		correctly.
-
-Sun Oct  9 23:46:03 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (do_tty_hangup): If the tty driver flags
-		TTY_DRIVER_RESET_TERMIOS is set, then reset the termios
-		settings back to the driver's initial configuration.  This
-		allows the termios settings to be reset even if a process
-		has hung up file descriptors keeping a pty's termios from
-		being freed and reset.
-
-	* tty_io.c (release_dev): Fix memory leak.  The pty's other
-		termios structure should also be freed.
-
-	* serial.c (rs_close, shutdown): Change how we wait for the
-		transmitter to completely drain before shutting down the
-		serial port.  We now do it by scheduling in another
-		process instead of busy looping with the interrupts turned
-		on.  This may eliminate some race condition problems that
-		some people seem to be reporting.
-
-Sun Sep 25 14:18:14 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (release_dev): When freeing a tty make sure that both
-		the tty and the o_tty (if present) aren't a process's
-		controlling tty.  (Previously, we only checked the tty.)
-
-	* serial.c (change_speed): Only enable the Modem Status
-		Interrupt for a port if CLOCAL is not set or CRTSCTS
-		is set.  If we're not checking the carrier detect and
-		CTS line, there's no point in enabling the modem
-		status interrupt.  This will save spurious interrupts
-		from slowing down systems who have terminals that
-		don't support either line.  (Of course, if you want
-		only one of CD and CTS support, you will need a
-		properly wired serial cable.)
-
-Thu Sep 22 08:32:48 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (do_SAK): Return if tty is null.
-
-	* tty_io.c (_tty_name): Return "NULL tty" if the passed in tty is
-		NULL.
-
-Sat Sep 17 13:19:25 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_ioctl.c (n_tty_ioctl): Fix TIOCGLCKTRMIOS and
-		TIOCSLCKTRMIOS, which were totally broken.  Remove
-		extra indirection from argument; it should be a struct
-		termios *, not a struct termios **.
-		&real_tty->termios_locked should have been
-		real_tty->termios_locked.  This caused us to be
-		reading and writing the termios_locked structure to
-		random places in kernel memory.  
-
-	* tty_io.c (release_dev): Oops!  Forgot to delete a critical kfree
-		of the locked_termios.  This leaves the locked_termios
-		structure pointed at a freed object.  
-
-Fri Sep 16 08:13:25 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_open): Don't check for an exclusive open until
-		after the device specific open routine has been called.
-		Otherwise, the serial device ref counting will be screwed
-		up.
-
-	* serial.c (rs_open, block_til_ready): Don't set termios structure
-		until after block_til_ready has returned successfully.
-		Modify block_til_ready to check the normal_termios
-		structure directly, so it doesn't rely on termios being
-		set before it's called.
-
-Thu Sep 15 23:34:01 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_close): Turn off interrupts during rs_close() to
-		prevent a race condition with the hangup code (which
-		runs during a software interrupt).
-
-	* tty_io.c (release_dev): Don't free the locked_termios structure;
-		its state must be retained across device opens.
-
-
-	* tty_io.c (tty_unregister_driver): Added function to unregister a
-		tty driver.  (For loadable device drivers.)
-
-
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 2fb3a480f6b0..4b66c69eaf57 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -57,7 +57,7 @@ config AGP_AMD
 
 config AGP_AMD64
 	tristate "AMD Opteron/Athlon64 on-CPU GART support"
-	depends on AGP && X86
+	depends on AGP && X86 && K8_NB
 	help
 	  This option gives you AGP support for the GLX component of
 	  X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 919a28558d36..a3e10dc7cc25 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -298,7 +298,7 @@ static void intel_agp_insert_sg_entries(struct agp_memory *mem,
 			j++;
 		}
 	} else {
-		/* sg may merge pages, but we have to seperate
+		/* sg may merge pages, but we have to separate
 		 * per-page addr for GTT */
 		unsigned int len, m;
 
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index fe2cb2f5db17..a7424bf7eacf 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -14,7 +14,7 @@
 /* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter  */
 /* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3    */
 /* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes       */
-/* adresses de base des cartes, IOCTL 6 plus complet                         */
+/* addresses de base des cartes, IOCTL 6 plus complet                         */
 /* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification  */
 /* de code autre que le texte V2.6.1 en V2.8.0                               */
 /*****************************************************************************/
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index fd0242676a2a..21c54955084e 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -353,7 +353,7 @@ static void hvc_close_event(struct HvLpEvent *event)
 
 	if (!hvlpevent_is_int(event)) {
 		printk(KERN_WARNING
-			"hvc: got unexpected close acknowlegement\n");
+			"hvc: got unexpected close acknowledgement\n");
 		return;
 	}
 
diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c
index 21681a81cc35..37b0542a4eeb 100644
--- a/drivers/char/hvc_iucv.c
+++ b/drivers/char/hvc_iucv.c
@@ -139,6 +139,8 @@ struct hvc_iucv_private *hvc_iucv_get_private(uint32_t num)
  *
  * This function allocates a new struct iucv_tty_buffer element and, optionally,
  * allocates an internal data buffer with the specified size @size.
+ * The internal data buffer is always allocated with GFP_DMA which is
+ * required for receiving and sending data with IUCV.
  * Note: The total message size arises from the internal buffer size and the
  *	 members of the iucv_tty_msg structure.
  * The function returns NULL if memory allocation has failed.
@@ -154,7 +156,7 @@ static struct iucv_tty_buffer *alloc_tty_buffer(size_t size, gfp_t flags)
 
 	if (size > 0) {
 		bufp->msg.length = MSG_SIZE(size);
-		bufp->mbuf = kmalloc(bufp->msg.length, flags);
+		bufp->mbuf = kmalloc(bufp->msg.length, flags | GFP_DMA);
 		if (!bufp->mbuf) {
 			mempool_free(bufp, hvc_iucv_mempool);
 			return NULL;
@@ -237,7 +239,7 @@ static int hvc_iucv_write(struct hvc_iucv_private *priv,
 	if (!rb->mbuf) { /* message not yet received ... */
 		/* allocate mem to store msg data; if no memory is available
 		 * then leave the buffer on the list and re-try later */
-		rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC);
+		rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC | GFP_DMA);
 		if (!rb->mbuf)
 			return -ENOMEM;
 
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index 9b3e09cd41f9..10f868eefaa6 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -71,7 +71,7 @@ MODULE_VERSION(DRV_MODULE_VERSION);
  *        x22 + x21 + x17 + x15 + x13 + x12 + x11 + x7 + x5 + x + 1
  *
  * The RNG_CTL_VCO value of each noise cell must be programmed
- * seperately.  This is why 4 control register values must be provided
+ * separately.  This is why 4 control register values must be provided
  * to the hypervisor.  During a write, the hypervisor writes them all,
  * one at a time, to the actual RNG_CTL register.  The first three
  * values are used to setup the desired RNG_CTL_VCO for each entropy
diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h
index 8aa6e7ab8d5b..c0ba6c05f0cd 100644
--- a/drivers/char/ip2/i2hw.h
+++ b/drivers/char/ip2/i2hw.h
@@ -559,7 +559,7 @@ Loadware may be sent to the board in two ways:
 
 2) It may be hard-coded into your source by including a .h file (typically
 	supplied by Computone), which declares a data array and initializes every
-	element. This acheives the same result as if an entire loadware file had 
+	element. This achieves the same result as if an entire loadware file had 
 	been read into the array.
 
 	This requires more data space in your program, but access to the file system
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 176f1751237f..4462b113ba3f 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -295,6 +295,9 @@ struct smi_info {
 static int force_kipmid[SI_MAX_PARMS];
 static int num_force_kipmid;
 
+static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
+static int num_max_busy_us;
+
 static int unload_when_empty = 1;
 
 static int try_smi_init(struct smi_info *smi);
@@ -925,23 +928,77 @@ static void set_run_to_completion(void *send_info, int i_run_to_completion)
 	}
 }
 
+/*
+ * Use -1 in the nsec value of the busy waiting timespec to tell that
+ * we are spinning in kipmid looking for something and not delaying
+ * between checks
+ */
+static inline void ipmi_si_set_not_busy(struct timespec *ts)
+{
+	ts->tv_nsec = -1;
+}
+static inline int ipmi_si_is_busy(struct timespec *ts)
+{
+	return ts->tv_nsec != -1;
+}
+
+static int ipmi_thread_busy_wait(enum si_sm_result smi_result,
+				 const struct smi_info *smi_info,
+				 struct timespec *busy_until)
+{
+	unsigned int max_busy_us = 0;
+
+	if (smi_info->intf_num < num_max_busy_us)
+		max_busy_us = kipmid_max_busy_us[smi_info->intf_num];
+	if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY)
+		ipmi_si_set_not_busy(busy_until);
+	else if (!ipmi_si_is_busy(busy_until)) {
+		getnstimeofday(busy_until);
+		timespec_add_ns(busy_until, max_busy_us*NSEC_PER_USEC);
+	} else {
+		struct timespec now;
+		getnstimeofday(&now);
+		if (unlikely(timespec_compare(&now, busy_until) > 0)) {
+			ipmi_si_set_not_busy(busy_until);
+			return 0;
+		}
+	}
+	return 1;
+}
+
+
+/*
+ * A busy-waiting loop for speeding up IPMI operation.
+ *
+ * Lousy hardware makes this hard.  This is only enabled for systems
+ * that are not BT and do not have interrupts.  It starts spinning
+ * when an operation is complete or until max_busy tells it to stop
+ * (if that is enabled).  See the paragraph on kimid_max_busy_us in
+ * Documentation/IPMI.txt for details.
+ */
 static int ipmi_thread(void *data)
 {
 	struct smi_info *smi_info = data;
 	unsigned long flags;
 	enum si_sm_result smi_result;
+	struct timespec busy_until;
 
+	ipmi_si_set_not_busy(&busy_until);
 	set_user_nice(current, 19);
 	while (!kthread_should_stop()) {
+		int busy_wait;
+
 		spin_lock_irqsave(&(smi_info->si_lock), flags);
 		smi_result = smi_event_handler(smi_info, 0);
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
+		busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
+						  &busy_until);
 		if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
 			; /* do nothing */
-		else if (smi_result == SI_SM_CALL_WITH_DELAY)
+		else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
 			schedule();
 		else
-			schedule_timeout_interruptible(1);
+			schedule_timeout_interruptible(0);
 	}
 	return 0;
 }
@@ -1144,7 +1201,7 @@ static int           regsizes[SI_MAX_PARMS];
 static unsigned int num_regsizes;
 static int           regshifts[SI_MAX_PARMS];
 static unsigned int num_regshifts;
-static int slave_addrs[SI_MAX_PARMS];
+static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */
 static unsigned int num_slave_addrs;
 
 #define IPMI_IO_ADDR_SPACE  0
@@ -1212,6 +1269,11 @@ module_param(unload_when_empty, int, 0);
 MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
 		 " specified or found, default is 1.  Setting to 0"
 		 " is useful for hot add of devices using hotmod.");
+module_param_array(kipmid_max_busy_us, uint, &num_max_busy_us, 0644);
+MODULE_PARM_DESC(kipmid_max_busy_us,
+		 "Max time (in microseconds) to busy-wait for IPMI data before"
+		 " sleeping. 0 (default) means to wait forever. Set to 100-500"
+		 " if kipmid is using up a lot of CPU time.");
 
 
 static void std_irq_cleanup(struct smi_info *info)
@@ -1607,7 +1669,7 @@ static int hotmod_handler(const char *val, struct kernel_param *kp)
 		regsize = 1;
 		regshift = 0;
 		irq = 0;
-		ipmb = 0x20;
+		ipmb = 0; /* Choose the default if not specified */
 
 		next = strchr(curr, ':');
 		if (next) {
@@ -1799,6 +1861,7 @@ static __devinit void hardcode_find_bmc(void)
 		info->irq = irqs[i];
 		if (info->irq)
 			info->irq_setup = std_irq_setup;
+		info->slave_addr = slave_addrs[i];
 
 		try_smi_init(info);
 	}
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 48788db4e280..1f3215ac085b 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 1991, 1992  Linus Torvalds
  *
- *  Added devfs support. 
+ *  Added devfs support.
  *    Jan-11-1998, C. Scott Ananian <cananian@alumni.princeton.edu>
  *  Shared /dev/zero mmapping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com>
  */
@@ -44,36 +44,6 @@ static inline unsigned long size_inside_page(unsigned long start,
 	return min(sz, size);
 }
 
-/*
- * Architectures vary in how they handle caching for addresses
- * outside of main memory.
- *
- */
-static inline int uncached_access(struct file *file, unsigned long addr)
-{
-#if defined(CONFIG_IA64)
-	/*
-	 * On ia64, we ignore O_DSYNC because we cannot tolerate memory attribute aliases.
-	 */
-	return !(efi_mem_attributes(addr) & EFI_MEMORY_WB);
-#elif defined(CONFIG_MIPS)
-	{
-		extern int __uncached_access(struct file *file,
-					     unsigned long addr);
-
-		return __uncached_access(file, addr);
-	}
-#else
-	/*
-	 * Accessing memory above the top the kernel knows about or through a file pointer
-	 * that was marked O_DSYNC will be done non-cached.
-	 */
-	if (file->f_flags & O_DSYNC)
-		return 1;
-	return addr >= __pa(high_memory);
-#endif
-}
-
 #ifndef ARCH_HAS_VALID_PHYS_ADDR_RANGE
 static inline int valid_phys_addr_range(unsigned long addr, size_t count)
 {
@@ -115,15 +85,15 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 }
 #endif
 
-void __attribute__((weak)) unxlate_dev_mem_ptr(unsigned long phys, void *addr)
+void __weak unxlate_dev_mem_ptr(unsigned long phys, void *addr)
 {
 }
 
 /*
- * This funcion reads the *physical* memory. The f_pos points directly to the 
- * memory location. 
+ * This funcion reads the *physical* memory. The f_pos points directly to the
+ * memory location.
  */
-static ssize_t read_mem(struct file * file, char __user * buf,
+static ssize_t read_mem(struct file *file, char __user *buf,
 			size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -140,10 +110,10 @@ static ssize_t read_mem(struct file * file, char __user * buf,
 		if (sz > 0) {
 			if (clear_user(buf, sz))
 				return -EFAULT;
-			buf += sz; 
-			p += sz; 
-			count -= sz; 
-			read += sz; 
+			buf += sz;
+			p += sz;
+			count -= sz;
+			read += sz;
 		}
 	}
 #endif
@@ -157,9 +127,9 @@ static ssize_t read_mem(struct file * file, char __user * buf,
 			return -EPERM;
 
 		/*
-		 * On ia64 if a page has been mapped somewhere as
-		 * uncached, then it must also be accessed uncached
-		 * by the kernel or data corruption may occur
+		 * On ia64 if a page has been mapped somewhere as uncached, then
+		 * it must also be accessed uncached by the kernel or data
+		 * corruption may occur.
 		 */
 		ptr = xlate_dev_mem_ptr(p);
 		if (!ptr)
@@ -180,7 +150,7 @@ static ssize_t read_mem(struct file * file, char __user * buf,
 	return read;
 }
 
-static ssize_t write_mem(struct file * file, const char __user * buf, 
+static ssize_t write_mem(struct file *file, const char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -212,9 +182,9 @@ static ssize_t write_mem(struct file * file, const char __user * buf,
 			return -EPERM;
 
 		/*
-		 * On ia64 if a page has been mapped somewhere as
-		 * uncached, then it must also be accessed uncached
-		 * by the kernel or data corruption may occur
+		 * On ia64 if a page has been mapped somewhere as uncached, then
+		 * it must also be accessed uncached by the kernel or data
+		 * corruption may occur.
 		 */
 		ptr = xlate_dev_mem_ptr(p);
 		if (!ptr) {
@@ -242,13 +212,46 @@ static ssize_t write_mem(struct file * file, const char __user * buf,
 	return written;
 }
 
-int __attribute__((weak)) phys_mem_access_prot_allowed(struct file *file,
+int __weak phys_mem_access_prot_allowed(struct file *file,
 	unsigned long pfn, unsigned long size, pgprot_t *vma_prot)
 {
 	return 1;
 }
 
 #ifndef __HAVE_PHYS_MEM_ACCESS_PROT
+
+/*
+ * Architectures vary in how they handle caching for addresses
+ * outside of main memory.
+ *
+ */
+static int uncached_access(struct file *file, unsigned long addr)
+{
+#if defined(CONFIG_IA64)
+	/*
+	 * On ia64, we ignore O_DSYNC because we cannot tolerate memory
+	 * attribute aliases.
+	 */
+	return !(efi_mem_attributes(addr) & EFI_MEMORY_WB);
+#elif defined(CONFIG_MIPS)
+	{
+		extern int __uncached_access(struct file *file,
+					     unsigned long addr);
+
+		return __uncached_access(file, addr);
+	}
+#else
+	/*
+	 * Accessing memory above the top the kernel knows about or through a
+	 * file pointer
+	 * that was marked O_DSYNC will be done non-cached.
+	 */
+	if (file->f_flags & O_DSYNC)
+		return 1;
+	return addr >= __pa(high_memory);
+#endif
+}
+
 static pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				     unsigned long size, pgprot_t vma_prot)
 {
@@ -294,7 +297,7 @@ static const struct vm_operations_struct mmap_mem_ops = {
 #endif
 };
 
-static int mmap_mem(struct file * file, struct vm_area_struct * vma)
+static int mmap_mem(struct file *file, struct vm_area_struct *vma)
 {
 	size_t size = vma->vm_end - vma->vm_start;
 
@@ -329,7 +332,7 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
 }
 
 #ifdef CONFIG_DEVKMEM
-static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
+static int mmap_kmem(struct file *file, struct vm_area_struct *vma)
 {
 	unsigned long pfn;
 
@@ -337,9 +340,9 @@ static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
 	pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
 
 	/*
-	 * RED-PEN: on some architectures there is more mapped memory
-	 * than available in mem_map which pfn_valid checks
-	 * for. Perhaps should add a new macro here.
+	 * RED-PEN: on some architectures there is more mapped memory than
+	 * available in mem_map which pfn_valid checks for. Perhaps should add a
+	 * new macro here.
 	 *
 	 * RED-PEN: vmalloc is not supported right now.
 	 */
@@ -389,7 +392,7 @@ static ssize_t read_oldmem(struct file *file, char __user *buf,
 /*
  * This function reads the *virtual* memory as seen by the kernel.
  */
-static ssize_t read_kmem(struct file *file, char __user *buf, 
+static ssize_t read_kmem(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -400,8 +403,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
 	read = 0;
 	if (p < (unsigned long) high_memory) {
 		low_count = count;
-		if (count > (unsigned long) high_memory - p)
-			low_count = (unsigned long) high_memory - p;
+		if (count > (unsigned long)high_memory - p)
+			low_count = (unsigned long)high_memory - p;
 
 #ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED
 		/* we don't have page 0 mapped on sparc and m68k.. */
@@ -465,9 +468,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
 }
 
 
-static inline ssize_t
-do_write_kmem(unsigned long p, const char __user *buf,
-	      size_t count, loff_t *ppos)
+static ssize_t do_write_kmem(unsigned long p, const char __user *buf,
+				size_t count, loff_t *ppos)
 {
 	ssize_t written, sz;
 	unsigned long copied;
@@ -491,9 +493,9 @@ do_write_kmem(unsigned long p, const char __user *buf,
 		sz = size_inside_page(p, count);
 
 		/*
-		 * On ia64 if a page has been mapped somewhere as
-		 * uncached, then it must also be accessed uncached
-		 * by the kernel or data corruption may occur
+		 * On ia64 if a page has been mapped somewhere as uncached, then
+		 * it must also be accessed uncached by the kernel or data
+		 * corruption may occur.
 		 */
 		ptr = xlate_dev_kmem_ptr((char *)p);
 
@@ -514,11 +516,10 @@ do_write_kmem(unsigned long p, const char __user *buf,
 	return written;
 }
 
-
 /*
  * This function writes to the *virtual* memory as seen by the kernel.
  */
-static ssize_t write_kmem(struct file * file, const char __user * buf, 
+static ssize_t write_kmem(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -570,17 +571,17 @@ static ssize_t write_kmem(struct file * file, const char __user * buf,
 #endif
 
 #ifdef CONFIG_DEVPORT
-static ssize_t read_port(struct file * file, char __user * buf,
+static ssize_t read_port(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	unsigned long i = *ppos;
 	char __user *tmp = buf;
 
 	if (!access_ok(VERIFY_WRITE, buf, count))
-		return -EFAULT; 
+		return -EFAULT;
 	while (count-- > 0 && i < 65536) {
-		if (__put_user(inb(i),tmp) < 0) 
-			return -EFAULT;  
+		if (__put_user(inb(i), tmp) < 0)
+			return -EFAULT;
 		i++;
 		tmp++;
 	}
@@ -588,22 +589,22 @@ static ssize_t read_port(struct file * file, char __user * buf,
 	return tmp-buf;
 }
 
-static ssize_t write_port(struct file * file, const char __user * buf,
+static ssize_t write_port(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	unsigned long i = *ppos;
 	const char __user * tmp = buf;
 
-	if (!access_ok(VERIFY_READ,buf,count))
+	if (!access_ok(VERIFY_READ, buf, count))
 		return -EFAULT;
 	while (count-- > 0 && i < 65536) {
 		char c;
 		if (__get_user(c, tmp)) {
 			if (tmp > buf)
 				break;
-			return -EFAULT; 
+			return -EFAULT;
 		}
-		outb(c,i);
+		outb(c, i);
 		i++;
 		tmp++;
 	}
@@ -612,13 +613,13 @@ static ssize_t write_port(struct file * file, const char __user * buf,
 }
 #endif
 
-static ssize_t read_null(struct file * file, char __user * buf,
+static ssize_t read_null(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	return 0;
 }
 
-static ssize_t write_null(struct file * file, const char __user * buf,
+static ssize_t write_null(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	return count;
@@ -630,13 +631,13 @@ static int pipe_to_null(struct pipe_inode_info *info, struct pipe_buffer *buf,
 	return sd->len;
 }
 
-static ssize_t splice_write_null(struct pipe_inode_info *pipe,struct file *out,
+static ssize_t splice_write_null(struct pipe_inode_info *pipe, struct file *out,
 				 loff_t *ppos, size_t len, unsigned int flags)
 {
 	return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_null);
 }
 
-static ssize_t read_zero(struct file * file, char __user * buf, 
+static ssize_t read_zero(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	size_t written;
@@ -667,7 +668,7 @@ static ssize_t read_zero(struct file * file, char __user * buf,
 	return written ? written : -EFAULT;
 }
 
-static int mmap_zero(struct file * file, struct vm_area_struct * vma)
+static int mmap_zero(struct file *file, struct vm_area_struct *vma)
 {
 #ifndef CONFIG_MMU
 	return -ENOSYS;
@@ -677,7 +678,7 @@ static int mmap_zero(struct file * file, struct vm_area_struct * vma)
 	return 0;
 }
 
-static ssize_t write_full(struct file * file, const char __user * buf,
+static ssize_t write_full(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	return -ENOSPC;
@@ -688,8 +689,7 @@ static ssize_t write_full(struct file * file, const char __user * buf,
  * can fopen() both devices with "a" now.  This was previously impossible.
  * -- SRB.
  */
-
-static loff_t null_lseek(struct file * file, loff_t offset, int orig)
+static loff_t null_lseek(struct file *file, loff_t offset, int orig)
 {
 	return file->f_pos = 0;
 }
@@ -702,24 +702,31 @@ static loff_t null_lseek(struct file * file, loff_t offset, int orig)
  * also note that seeking relative to the "end of file" isn't supported:
  * it has no meaning, so it returns -EINVAL.
  */
-static loff_t memory_lseek(struct file * file, loff_t offset, int orig)
+static loff_t memory_lseek(struct file *file, loff_t offset, int orig)
 {
 	loff_t ret;
 
 	mutex_lock(&file->f_path.dentry->d_inode->i_mutex);
 	switch (orig) {
-		case 0:
-			file->f_pos = offset;
-			ret = file->f_pos;
-			force_successful_syscall_return();
+	case SEEK_CUR:
+		offset += file->f_pos;
+		if ((unsigned long long)offset <
+		    (unsigned long long)file->f_pos) {
+			ret = -EOVERFLOW;
 			break;
-		case 1:
-			file->f_pos += offset;
-			ret = file->f_pos;
-			force_successful_syscall_return();
+		}
+	case SEEK_SET:
+		/* to avoid userland mistaking f_pos=-9 as -EBADF=-9 */
+		if ((unsigned long long)offset >= ~0xFFFULL) {
+			ret = -EOVERFLOW;
 			break;
-		default:
-			ret = -EINVAL;
+		}
+		file->f_pos = offset;
+		ret = file->f_pos;
+		force_successful_syscall_return();
+		break;
+	default:
+		ret = -EINVAL;
 	}
 	mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
 	return ret;
@@ -803,7 +810,7 @@ static const struct file_operations oldmem_fops = {
 };
 #endif
 
-static ssize_t kmsg_write(struct file * file, const char __user * buf,
+static ssize_t kmsg_write(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	char *tmp;
@@ -825,7 +832,7 @@ static ssize_t kmsg_write(struct file * file, const char __user * buf,
 }
 
 static const struct file_operations kmsg_fops = {
-	.write =	kmsg_write,
+	.write = kmsg_write,
 };
 
 static const struct memdev {
@@ -876,7 +883,7 @@ static int memory_open(struct inode *inode, struct file *filp)
 }
 
 static const struct file_operations memory_fops = {
-	.open		= memory_open,
+	.open = memory_open,
 };
 
 static char *mem_devnode(struct device *dev, mode_t *mode)
@@ -897,7 +904,7 @@ static int __init chr_dev_init(void)
 	if (err)
 		return err;
 
-	if (register_chrdev(MEM_MAJOR,"mem",&memory_fops))
+	if (register_chrdev(MEM_MAJOR, "mem", &memory_fops))
 		printk("unable to get major %d for memory devs\n", MEM_MAJOR);
 
 	mem_class = class_create(THIS_MODULE, "mem");
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index 918711aa56f3..04fd0d843b3b 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -546,7 +546,7 @@ static void mmtimer_tasklet(unsigned long data)
 {
 	int nodeid = data;
 	struct mmtimer_node *mn = &timers[nodeid];
-	struct mmtimer *x = rb_entry(mn->next, struct mmtimer, list);
+	struct mmtimer *x;
 	struct k_itimer *t;
 	unsigned long flags;
 
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 2e50f4dfc79c..bdae8327143c 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -48,6 +48,7 @@
 #include <linux/audit.h>
 #include <linux/file.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 
 #include <asm/system.h>
 
@@ -2091,3 +2092,19 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = {
 	.receive_buf     = n_tty_receive_buf,
 	.write_wakeup    = n_tty_write_wakeup
 };
+
+/**
+ *	n_tty_inherit_ops	-	inherit N_TTY methods
+ *	@ops: struct tty_ldisc_ops where to save N_TTY methods
+ *
+ *	Used by a generic struct tty_ldisc_ops to easily inherit N_TTY
+ *	methods.
+ */
+
+void n_tty_inherit_ops(struct tty_ldisc_ops *ops)
+{
+	*ops = tty_ldisc_N_TTY;
+	ops->owner = NULL;
+	ops->refcount = ops->flags = 0;
+}
+EXPORT_SYMBOL_GPL(n_tty_inherit_ops);
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 385c44b3034f..5ee424817263 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -220,7 +220,7 @@ static void pty_set_termios(struct tty_struct *tty,
  *	@tty: tty being resized
  *	@ws: window size being set.
  *
- *	Update the termios variables and send the neccessary signals to
+ *	Update the termios variables and send the necessary signals to
  *	peform a terminal resize correctly
  */
 
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 2849713d2231..2fd3d39995d5 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1191,7 +1191,7 @@ const struct file_operations urandom_fops = {
 void generate_random_uuid(unsigned char uuid_out[16])
 {
 	get_random_bytes(uuid_out, 16);
-	/* Set UUID version to 4 --- truely random generation */
+	/* Set UUID version to 4 --- truly random generation */
 	uuid_out[6] = (uuid_out[6] & 0x0F) | 0x40;
 	/* Set the UUID variant to DCE */
 	uuid_out[8] = (uuid_out[8] & 0x3F) | 0x80;
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 986aa606a6b6..1ec3d5cd748f 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -1989,7 +1989,7 @@ void mvme167_serial_console_setup(int cflag)
 	/*
 	 * Attempt to set up all channels to something reasonable, and
 	 * bang out a INIT_CHAN command.  We should then be able to limit
-	 * the ammount of fiddling we have to do in normal running.
+	 * the amount of fiddling we have to do in normal running.
 	 */
 
 	for (ch = 3; ch >= 0; ch--) {
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index ac16fbec72d0..283a15bc84e3 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -148,7 +148,6 @@ void tty_audit_fork(struct signal_struct *sig)
 	spin_lock_irq(&current->sighand->siglock);
 	sig->audit_tty = current->signal->audit_tty;
 	spin_unlock_irq(&current->sighand->siglock);
-	sig->tty_audit_buf = NULL;
 }
 
 /**
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index dcb9083ecde0..a42c466f7092 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -2028,7 +2028,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
  *	@rows: rows (character)
  *	@cols: cols (character)
  *
- *	Update the termios variables and send the neccessary signals to
+ *	Update the termios variables and send the necessary signals to
  *	peform a terminal resize correctly
  */
 
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 50faa1fb0f06..bd1d1164fec5 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -821,7 +821,7 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
  *
  *	Resize a virtual console, clipping according to the actual constraints.
  *	If the caller passes a tty structure then update the termios winsize
- *	information and perform any neccessary signal handling.
+ *	information and perform any necessary signal handling.
  *
  *	Caller must hold the console semaphore. Takes the termios mutex and
  *	ctrl_lock of the tty IFF a tty is passed.
@@ -2119,8 +2119,6 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
 	uint8_t inverse;
 	uint8_t width;
 	u16 himask, charmask;
-	const unsigned char *orig_buf = NULL;
-	int orig_count;
 
 	if (in_interrupt())
 		return count;
@@ -2142,8 +2140,6 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
 	    release_console_sem();
 	    return 0;
 	}
-	orig_buf = buf;
-	orig_count = count;
 
 	himask = vc->vc_hi_font_mask;
 	charmask = himask ? 0x1ff : 0xff;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 67bc2ece7b4b..2d5d575e889d 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -766,7 +766,7 @@ static void cpufreq_sysfs_release(struct kobject *kobj)
 	complete(&policy->kobj_unregister);
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show	= show,
 	.store	= store,
 };
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 97b003839fb6..8719b36e1a4d 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -22,6 +22,7 @@ static int __init cpuidle_sysfs_setup(char *unused)
 __setup("cpuidle_sysfs_switch", cpuidle_sysfs_setup);
 
 static ssize_t show_available_governors(struct sysdev_class *class,
+					struct sysdev_class_attribute *attr,
 					char *buf)
 {
 	ssize_t i = 0;
@@ -41,6 +42,7 @@ out:
 }
 
 static ssize_t show_current_driver(struct sysdev_class *class,
+				   struct sysdev_class_attribute *attr,
 				   char *buf)
 {
 	ssize_t ret;
@@ -56,6 +58,7 @@ static ssize_t show_current_driver(struct sysdev_class *class,
 }
 
 static ssize_t show_current_governor(struct sysdev_class *class,
+				     struct sysdev_class_attribute *attr,
 				     char *buf)
 {
 	ssize_t ret;
@@ -71,6 +74,7 @@ static ssize_t show_current_governor(struct sysdev_class *class,
 }
 
 static ssize_t store_current_governor(struct sysdev_class *class,
+				      struct sysdev_class_attribute *attr,
 				      const char *buf, size_t count)
 {
 	char gov_name[CPUIDLE_NAME_LEN];
@@ -191,7 +195,7 @@ static ssize_t cpuidle_store(struct kobject * kobj, struct attribute * attr,
 	return ret;
 }
 
-static struct sysfs_ops cpuidle_sysfs_ops = {
+static const struct sysfs_ops cpuidle_sysfs_ops = {
 	.show = cpuidle_show,
 	.store = cpuidle_store,
 };
@@ -277,7 +281,7 @@ static ssize_t cpuidle_state_show(struct kobject * kobj,
 	return ret;
 }
 
-static struct sysfs_ops cpuidle_state_sysfs_ops = {
+static const struct sysfs_ops cpuidle_state_sysfs_ops = {
 	.show = cpuidle_state_show,
 };
 
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index 09ad9154d86c..73e8b1713b54 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -321,7 +321,7 @@ static atomic_t hifn_dev_number;
 #define	HIFN_PUBOPLEN_MOD_M	0x0000007f	/* modulus length mask */
 #define	HIFN_PUBOPLEN_MOD_S	0		/* modulus length shift */
 #define	HIFN_PUBOPLEN_EXP_M	0x0003ff80	/* exponent length mask */
-#define	HIFN_PUBOPLEN_EXP_S	7		/* exponent lenght shift */
+#define	HIFN_PUBOPLEN_EXP_S	7		/* exponent length shift */
 #define	HIFN_PUBOPLEN_RED_M	0x003c0000	/* reducend length mask */
 #define	HIFN_PUBOPLEN_RED_S	18		/* reducend length shift */
 
diff --git a/drivers/dma/coh901318_lli.h b/drivers/dma/coh901318_lli.h
index 7bf713b79c6b..7a5c80990e9e 100644
--- a/drivers/dma/coh901318_lli.h
+++ b/drivers/dma/coh901318_lli.h
@@ -30,7 +30,7 @@ struct device;
  * @pool: pool handle
  * @dev: dma device
  * @lli_nbr: number of lli:s in the pool
- * @algin: adress alignemtn of lli:s
+ * @algin: address alignemtn of lli:s
  * returns 0 on success otherwise none zero
  */
 int coh901318_pool_create(struct coh901318_pool *pool,
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index af14c9a5b8d4..0099340b9616 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -1138,7 +1138,7 @@ ioat_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
 	return entry->show(&chan->common, page);
 }
 
-struct sysfs_ops ioat_sysfs_ops = {
+const struct sysfs_ops ioat_sysfs_ops = {
 	.show	= ioat_attr_show,
 };
 
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index 4f747a254074..86b97ac8774e 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -346,7 +346,7 @@ bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
 			   unsigned long *phys_complete);
 void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type);
 void ioat_kobject_del(struct ioatdma_device *device);
-extern struct sysfs_ops ioat_sysfs_ops;
+extern const struct sysfs_ops ioat_sysfs_ops;
 extern struct ioat_sysfs_entry ioat_version_attr;
 extern struct ioat_sysfs_entry ioat_cap_attr;
 #endif /* IOATDMA_H */
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index d205d493a68a..243e9aacad69 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -75,6 +75,14 @@ static struct edac_pci_ctl_info *e752x_pci;
 #define E752X_NR_CSROWS		8	/* number of csrows */
 
 /* E752X register addresses - device 0 function 0 */
+#define E752X_MCHSCRB		0x52	/* Memory Scrub register (16b) */
+					/*
+					 * 6:5     Scrub Completion Count
+					 * 3:2     Scrub Rate (i3100 only)
+					 *      01=fast 10=normal
+					 * 1:0     Scrub Mode enable
+					 *      00=off 10=on
+					 */
 #define E752X_DRB		0x60	/* DRAM row boundary register (8b) */
 #define E752X_DRA		0x70	/* DRAM row attribute register (8b) */
 					/*
@@ -240,6 +248,41 @@ static const struct e752x_dev_info e752x_devs[] = {
 		.ctl_name = "3100"},
 };
 
+/* Valid scrub rates for the e752x/3100 hardware memory scrubber. We
+ * map the scrubbing bandwidth to a hardware register value. The 'set'
+ * operation finds the 'matching or higher value'.  Note that scrubbing
+ * on the e752x can only be enabled/disabled.  The 3100 supports
+ * a normal and fast mode.
+ */
+
+#define SDRATE_EOT 0xFFFFFFFF
+
+struct scrubrate {
+	u32 bandwidth;	/* bandwidth consumed by scrubbing in bytes/sec */
+	u16 scrubval;	/* register value for scrub rate */
+};
+
+/* Rate below assumes same performance as i3100 using PC3200 DDR2 in
+ * normal mode.  e752x bridges don't support choosing normal or fast mode,
+ * so the scrubbing bandwidth value isn't all that important - scrubbing is
+ * either on or off.
+ */
+static const struct scrubrate scrubrates_e752x[] = {
+	{0,		0x00},	/* Scrubbing Off */
+	{500000,	0x02},	/* Scrubbing On */
+	{SDRATE_EOT,	0x00}	/* End of Table */
+};
+
+/* Fast mode: 2 GByte PC3200 DDR2 scrubbed in 33s = 63161283 bytes/s
+ * Normal mode: 125 (32000 / 256) times slower than fast mode.
+ */
+static const struct scrubrate scrubrates_i3100[] = {
+	{0,		0x00},	/* Scrubbing Off */
+	{500000,	0x0a},	/* Normal mode - 32k clocks */
+	{62500000,	0x06},	/* Fast mode - 256 clocks */
+	{SDRATE_EOT,	0x00}	/* End of Table */
+};
+
 static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci,
 				unsigned long page)
 {
@@ -915,6 +958,68 @@ static void e752x_check(struct mem_ctl_info *mci)
 	e752x_process_error_info(mci, &info, 1);
 }
 
+/* Program byte/sec bandwidth scrub rate to hardware */
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *new_bw)
+{
+	const struct scrubrate *scrubrates;
+	struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+	struct pci_dev *pdev = pvt->dev_d0f0;
+	int i;
+
+	if (pvt->dev_info->ctl_dev == PCI_DEVICE_ID_INTEL_3100_0)
+		scrubrates = scrubrates_i3100;
+	else
+		scrubrates = scrubrates_e752x;
+
+	/* Translate the desired scrub rate to a e752x/3100 register value.
+	 * Search for the bandwidth that is equal or greater than the
+	 * desired rate and program the cooresponding register value.
+	 */
+	for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++)
+		if (scrubrates[i].bandwidth >= *new_bw)
+			break;
+
+	if (scrubrates[i].bandwidth == SDRATE_EOT)
+		return -1;
+
+	pci_write_config_word(pdev, E752X_MCHSCRB, scrubrates[i].scrubval);
+
+	return 0;
+}
+
+/* Convert current scrub rate value into byte/sec bandwidth */
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+{
+	const struct scrubrate *scrubrates;
+	struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+	struct pci_dev *pdev = pvt->dev_d0f0;
+	u16 scrubval;
+	int i;
+
+	if (pvt->dev_info->ctl_dev == PCI_DEVICE_ID_INTEL_3100_0)
+		scrubrates = scrubrates_i3100;
+	else
+		scrubrates = scrubrates_e752x;
+
+	/* Find the bandwidth matching the memory scrubber configuration */
+	pci_read_config_word(pdev, E752X_MCHSCRB, &scrubval);
+	scrubval = scrubval & 0x0f;
+
+	for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++)
+		if (scrubrates[i].scrubval == scrubval)
+			break;
+
+	if (scrubrates[i].bandwidth == SDRATE_EOT) {
+		e752x_printk(KERN_WARNING,
+			"Invalid sdram scrub control value: 0x%x\n", scrubval);
+		return -1;
+	}
+
+	*bw = scrubrates[i].bandwidth;
+
+	return 0;
+}
+
 /* Return 1 if dual channel mode is active.  Else return 0. */
 static inline int dual_channel_active(u16 ddrcsr)
 {
@@ -1073,10 +1178,7 @@ fail:
 
 /* Setup system bus parity mask register.
  * Sysbus parity supported on:
- *   e7320/e7520/e7525 + Xeon
- *   i3100 + Xeon/Celeron
- * Sysbus parity not supported on:
- *   i3100 + Pentium M/Celeron M/Core Duo/Core2 Duo
+ * e7320/e7520/e7525 + Xeon
  */
 static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
 {
@@ -1087,10 +1189,7 @@ static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
 	/* Allow module parameter override, else see if CPU supports parity */
 	if (sysbus_parity != -1) {
 		enable = sysbus_parity;
-	} else if (cpu_id[0] &&
-		   ((strstr(cpu_id, "Pentium") && strstr(cpu_id, " M ")) ||
-		    (strstr(cpu_id, "Celeron") && strstr(cpu_id, " M ")) ||
-		    (strstr(cpu_id, "Core") && strstr(cpu_id, "Duo")))) {
+	} else if (cpu_id[0] && !strstr(cpu_id, "Xeon")) {
 		e752x_printk(KERN_INFO, "System Bus Parity not "
 			     "supported by CPU, disabling\n");
 		enable = 0;
@@ -1187,6 +1286,8 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
 	mci->dev_name = pci_name(pdev);
 	mci->edac_check = e752x_check;
 	mci->ctl_page_to_phys = ctl_page_to_phys;
+	mci->set_sdram_scrub_rate = set_sdram_scrub_rate;
+	mci->get_sdram_scrub_rate = get_sdram_scrub_rate;
 
 	/* set the map type.  1 = normal, 0 = reversed
 	 * Must be set before e752x_init_csrows in case csrow mapping
diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
index 53764577035f..5fdedbc0f545 100644
--- a/drivers/edac/edac_device_sysfs.c
+++ b/drivers/edac/edac_device_sysfs.c
@@ -137,7 +137,7 @@ static ssize_t edac_dev_ctl_info_store(struct kobject *kobj,
 }
 
 /* edac_dev file operations for an 'ctl_info' */
-static struct sysfs_ops device_ctl_info_ops = {
+static const struct sysfs_ops device_ctl_info_ops = {
 	.show = edac_dev_ctl_info_show,
 	.store = edac_dev_ctl_info_store
 };
@@ -373,7 +373,7 @@ static ssize_t edac_dev_instance_store(struct kobject *kobj,
 }
 
 /* edac_dev file operations for an 'instance' */
-static struct sysfs_ops device_instance_ops = {
+static const struct sysfs_ops device_instance_ops = {
 	.show = edac_dev_instance_show,
 	.store = edac_dev_instance_store
 };
@@ -476,7 +476,7 @@ static ssize_t edac_dev_block_store(struct kobject *kobj,
 }
 
 /* edac_dev file operations for a 'block' */
-static struct sysfs_ops device_block_ops = {
+static const struct sysfs_ops device_block_ops = {
 	.show = edac_dev_block_show,
 	.store = edac_dev_block_store
 };
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index e1d4ce083481..88840e9fa3e0 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -245,7 +245,7 @@ static ssize_t csrowdev_store(struct kobject *kobj, struct attribute *attr,
 	return -EIO;
 }
 
-static struct sysfs_ops csrowfs_ops = {
+static const struct sysfs_ops csrowfs_ops = {
 	.show = csrowdev_show,
 	.store = csrowdev_store
 };
@@ -575,7 +575,7 @@ static ssize_t mcidev_store(struct kobject *kobj, struct attribute *attr,
 }
 
 /* Intermediate show/store table */
-static struct sysfs_ops mci_ops = {
+static const struct sysfs_ops mci_ops = {
 	.show = mcidev_show,
 	.store = mcidev_store
 };
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
index fb60a877d768..bef94e3d9944 100644
--- a/drivers/edac/edac_pci_sysfs.c
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -121,7 +121,7 @@ static ssize_t edac_pci_instance_store(struct kobject *kobj,
 }
 
 /* fs_ops table */
-static struct sysfs_ops pci_instance_ops = {
+static const struct sysfs_ops pci_instance_ops = {
 	.show = edac_pci_instance_show,
 	.store = edac_pci_instance_store
 };
@@ -261,7 +261,7 @@ static ssize_t edac_pci_dev_store(struct kobject *kobj,
 	return -EIO;
 }
 
-static struct sysfs_ops edac_pci_sysfs_ops = {
+static const struct sysfs_ops edac_pci_sysfs_ops = {
 	.show = edac_pci_dev_show,
 	.store = edac_pci_dev_store
 };
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index ecd5928d7110..94cac0aacea3 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -239,16 +239,15 @@ static int __devinit mpc85xx_pci_err_probe(struct of_device *op,
 	/* we only need the error registers */
 	r.start += 0xe00;
 
-	if (!devm_request_mem_region(&op->dev, r.start,
-					r.end - r.start + 1, pdata->name)) {
+	if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r),
+					pdata->name)) {
 		printk(KERN_ERR "%s: Error while requesting mem region\n",
 		       __func__);
 		res = -EBUSY;
 		goto err;
 	}
 
-	pdata->pci_vbase = devm_ioremap(&op->dev, r.start,
-					r.end - r.start + 1);
+	pdata->pci_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r));
 	if (!pdata->pci_vbase) {
 		printk(KERN_ERR "%s: Unable to setup PCI err regs\n", __func__);
 		res = -ENOMEM;
@@ -668,15 +667,125 @@ static struct of_platform_driver mpc85xx_l2_err_driver = {
 
 /**************************** MC Err device ***************************/
 
+/*
+ * Taken from table 8-55 in the MPC8641 User's Manual and/or 9-61 in the
+ * MPC8572 User's Manual.  Each line represents a syndrome bit column as a
+ * 64-bit value, but split into an upper and lower 32-bit chunk.  The labels
+ * below correspond to Freescale's manuals.
+ */
+static unsigned int ecc_table[16] = {
+	/* MSB           LSB */
+	/* [0:31]    [32:63] */
+	0xf00fe11e, 0xc33c0ff7,	/* Syndrome bit 7 */
+	0x00ff00ff, 0x00fff0ff,
+	0x0f0f0f0f, 0x0f0fff00,
+	0x11113333, 0x7777000f,
+	0x22224444, 0x8888222f,
+	0x44448888, 0xffff4441,
+	0x8888ffff, 0x11118882,
+	0xffff1111, 0x22221114,	/* Syndrome bit 0 */
+};
+
+/*
+ * Calculate the correct ECC value for a 64-bit value specified by high:low
+ */
+static u8 calculate_ecc(u32 high, u32 low)
+{
+	u32 mask_low;
+	u32 mask_high;
+	int bit_cnt;
+	u8 ecc = 0;
+	int i;
+	int j;
+
+	for (i = 0; i < 8; i++) {
+		mask_high = ecc_table[i * 2];
+		mask_low = ecc_table[i * 2 + 1];
+		bit_cnt = 0;
+
+		for (j = 0; j < 32; j++) {
+			if ((mask_high >> j) & 1)
+				bit_cnt ^= (high >> j) & 1;
+			if ((mask_low >> j) & 1)
+				bit_cnt ^= (low >> j) & 1;
+		}
+
+		ecc |= bit_cnt << i;
+	}
+
+	return ecc;
+}
+
+/*
+ * Create the syndrome code which is generated if the data line specified by
+ * 'bit' failed.  Eg generate an 8-bit codes seen in Table 8-55 in the MPC8641
+ * User's Manual and 9-61 in the MPC8572 User's Manual.
+ */
+static u8 syndrome_from_bit(unsigned int bit) {
+	int i;
+	u8 syndrome = 0;
+
+	/*
+	 * Cycle through the upper or lower 32-bit portion of each value in
+	 * ecc_table depending on if 'bit' is in the upper or lower half of
+	 * 64-bit data.
+	 */
+	for (i = bit < 32; i < 16; i += 2)
+		syndrome |= ((ecc_table[i] >> (bit % 32)) & 1) << (i / 2);
+
+	return syndrome;
+}
+
+/*
+ * Decode data and ecc syndrome to determine what went wrong
+ * Note: This can only decode single-bit errors
+ */
+static void sbe_ecc_decode(u32 cap_high, u32 cap_low, u32 cap_ecc,
+		       int *bad_data_bit, int *bad_ecc_bit)
+{
+	int i;
+	u8 syndrome;
+
+	*bad_data_bit = -1;
+	*bad_ecc_bit = -1;
+
+	/*
+	 * Calculate the ECC of the captured data and XOR it with the captured
+	 * ECC to find an ECC syndrome value we can search for
+	 */
+	syndrome = calculate_ecc(cap_high, cap_low) ^ cap_ecc;
+
+	/* Check if a data line is stuck... */
+	for (i = 0; i < 64; i++) {
+		if (syndrome == syndrome_from_bit(i)) {
+			*bad_data_bit = i;
+			return;
+		}
+	}
+
+	/* If data is correct, check ECC bits for errors... */
+	for (i = 0; i < 8; i++) {
+		if ((syndrome >> i) & 0x1) {
+			*bad_ecc_bit = i;
+			return;
+		}
+	}
+}
+
 static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 {
 	struct mpc85xx_mc_pdata *pdata = mci->pvt_info;
 	struct csrow_info *csrow;
+	u32 bus_width;
 	u32 err_detect;
 	u32 syndrome;
 	u32 err_addr;
 	u32 pfn;
 	int row_index;
+	u32 cap_high;
+	u32 cap_low;
+	int bad_data_bit;
+	int bad_ecc_bit;
 
 	err_detect = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT);
 	if (!err_detect)
@@ -692,6 +801,15 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 	}
 
 	syndrome = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ECC);
+
+	/* Mask off appropriate bits of syndrome based on bus width */
+	bus_width = (in_be32(pdata->mc_vbase + MPC85XX_MC_DDR_SDRAM_CFG) &
+			DSC_DBW_MASK) ? 32 : 64;
+	if (bus_width == 64)
+		syndrome &= 0xff;
+	else
+		syndrome &= 0xffff;
+
 	err_addr = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ADDRESS);
 	pfn = err_addr >> PAGE_SHIFT;
 
@@ -701,14 +819,35 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 			break;
 	}
 
-	mpc85xx_mc_printk(mci, KERN_ERR, "Capture Data High: %#8.8x\n",
-			  in_be32(pdata->mc_vbase +
-				  MPC85XX_MC_CAPTURE_DATA_HI));
-	mpc85xx_mc_printk(mci, KERN_ERR, "Capture Data Low: %#8.8x\n",
-			  in_be32(pdata->mc_vbase +
-				  MPC85XX_MC_CAPTURE_DATA_LO));
-	mpc85xx_mc_printk(mci, KERN_ERR, "syndrome: %#8.8x\n", syndrome);
-	mpc85xx_mc_printk(mci, KERN_ERR, "err addr: %#8.8x\n", err_addr);
+	cap_high = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_DATA_HI);
+	cap_low = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_DATA_LO);
+
+	/*
+	 * Analyze single-bit errors on 64-bit wide buses
+	 * TODO: Add support for 32-bit wide buses
+	 */
+	if ((err_detect & DDR_EDE_SBE) && (bus_width == 64)) {
+		sbe_ecc_decode(cap_high, cap_low, syndrome,
+				&bad_data_bit, &bad_ecc_bit);
+
+		if (bad_data_bit != -1)
+			mpc85xx_mc_printk(mci, KERN_ERR,
+				"Faulty Data bit: %d\n", bad_data_bit);
+		if (bad_ecc_bit != -1)
+			mpc85xx_mc_printk(mci, KERN_ERR,
+				"Faulty ECC bit: %d\n", bad_ecc_bit);
+
+		mpc85xx_mc_printk(mci, KERN_ERR,
+			"Expected Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
+			cap_high ^ (1 << (bad_data_bit - 32)),
+			cap_low ^ (1 << bad_data_bit),
+			syndrome ^ (1 << bad_ecc_bit));
+	}
+
+	mpc85xx_mc_printk(mci, KERN_ERR,
+			"Captured Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
+			cap_high, cap_low, syndrome);
+	mpc85xx_mc_printk(mci, KERN_ERR, "Err addr: %#8.8x\n", err_addr);
 	mpc85xx_mc_printk(mci, KERN_ERR, "PFN: %#8.8x\n", pfn);
 
 	/* we are out of range */
diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h
index 52432ee7c4b9..cb24df839460 100644
--- a/drivers/edac/mpc85xx_edac.h
+++ b/drivers/edac/mpc85xx_edac.h
@@ -48,6 +48,9 @@
 #define DSC_MEM_EN	0x80000000
 #define DSC_ECC_EN	0x20000000
 #define DSC_RD_EN	0x10000000
+#define DSC_DBW_MASK	0x00180000
+#define DSC_DBW_32	0x00080000
+#define DSC_DBW_64	0x00000000
 
 #define DSC_SDTYPE_MASK		0x07000000
 
diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c
index 014cabd3afda..5db0518c66da 100644
--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -33,7 +33,6 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/rwsem.h>
-#include <linux/semaphore.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/workqueue.h>
@@ -828,9 +827,9 @@ static int update_unit(struct device *dev, void *data)
 	struct fw_driver *driver = (struct fw_driver *)dev->driver;
 
 	if (is_fw_unit(dev) && driver != NULL && driver->update != NULL) {
-		down(&dev->sem);
+		device_lock(dev);
 		driver->update(unit);
-		up(&dev->sem);
+		device_unlock(dev);
 	}
 
 	return 0;
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 9e4f59dc7f1e..110e24e50883 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -122,7 +122,7 @@ edd_attr_show(struct kobject * kobj, struct attribute *attr, char *buf)
 	return ret;
 }
 
-static struct sysfs_ops edd_attr_ops = {
+static const struct sysfs_ops edd_attr_ops = {
 	.show = edd_attr_show,
 };
 
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index f4f709d1370b..082f06ecd327 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -362,7 +362,7 @@ static ssize_t efivar_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops efivar_attr_ops = {
+static const struct sysfs_ops efivar_attr_ops = {
 	.show = efivar_attr_show,
 	.store = efivar_attr_store,
 };
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index a3600e3ed0fa..ed2801c378de 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -519,7 +519,7 @@ static ssize_t ibft_show_attribute(struct kobject *kobj,
 	return ret;
 }
 
-static struct sysfs_ops ibft_attr_ops = {
+static const struct sysfs_ops ibft_attr_ops = {
 	.show = ibft_show_attribute,
 };
 
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 20f645743ead..d59f7cad2269 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -74,7 +74,7 @@ static struct attribute *def_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops memmap_attr_ops = {
+static const struct sysfs_ops memmap_attr_ops = {
 	.show = memmap_attr_show,
 };
 
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9006fdb26fea..6d1b86661e63 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -623,7 +623,9 @@ static const struct attribute_group gpiochip_attr_group = {
  * /sys/class/gpio/unexport ... write-only
  *	integer N ... number of GPIO to unexport
  */
-static ssize_t export_store(struct class *class, const char *buf, size_t len)
+static ssize_t export_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf, size_t len)
 {
 	long	gpio;
 	int	status;
@@ -653,7 +655,9 @@ done:
 	return status ? : len;
 }
 
-static ssize_t unexport_store(struct class *class, const char *buf, size_t len)
+static ssize_t unexport_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf, size_t len)
 {
 	long	gpio;
 	int	status;
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 7e42b7e9d43a..014ce24761b9 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -70,19 +70,17 @@ static int drm_class_resume(struct device *dev)
 	return 0;
 }
 
-/* Display the version of drm_core. This doesn't work right in current design */
-static ssize_t version_show(struct class *dev, char *buf)
-{
-	return sprintf(buf, "%s %d.%d.%d %s\n", CORE_NAME, CORE_MAJOR,
-		       CORE_MINOR, CORE_PATCHLEVEL, CORE_DATE);
-}
-
 static char *drm_devnode(struct device *dev, mode_t *mode)
 {
 	return kasprintf(GFP_KERNEL, "dri/%s", dev_name(dev));
 }
 
-static CLASS_ATTR(version, S_IRUGO, version_show, NULL);
+static CLASS_ATTR_STRING(version, S_IRUGO,
+		CORE_NAME " "
+		__stringify(CORE_MAJOR) "."
+		__stringify(CORE_MINOR) "."
+		__stringify(CORE_PATCHLEVEL) " "
+		CORE_DATE);
 
 /**
  * drm_sysfs_create - create a struct drm_sysfs_class structure
@@ -109,7 +107,7 @@ struct class *drm_sysfs_create(struct module *owner, char *name)
 	class->suspend = drm_class_suspend;
 	class->resume = drm_class_resume;
 
-	err = class_create_file(class, &class_attr_version);
+	err = class_create_file(class, &class_attr_version.attr);
 	if (err)
 		goto err_out_class;
 
@@ -132,7 +130,7 @@ void drm_sysfs_destroy(void)
 {
 	if ((drm_class == NULL) || (IS_ERR(drm_class)))
 		return;
-	class_remove_file(drm_class, &class_attr_version);
+	class_remove_file(drm_class, &class_attr_version.attr);
 	class_destroy(drm_class);
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 71247da17da5..75bceee76044 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -3545,7 +3545,7 @@ int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, b
 	 * at which modes should be set up in the dual link style.
 	 *
 	 * Following the header, the BMP (ver 0xa) table has several records,
-	 * indexed by a seperate xlat table, indexed in turn by the fp strap in
+	 * indexed by a separate xlat table, indexed in turn by the fp strap in
 	 * EXTDEV_BOOT. Each record had a config byte, followed by 6 script
 	 * numbers for use by INIT_SUB which controlled panel init and power,
 	 * and finally a dword of ms to sleep between power off and on
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 5f8d987af363..4b9aaf2a8d0f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -553,7 +553,7 @@ struct drm_nouveau_private {
 	uint32_t ramro_offset;
 	uint32_t ramro_size;
 
-	/* base physical adresses */
+	/* base physical addresses */
 	uint64_t fb_phys;
 	uint64_t fb_available_size;
 	uint64_t fb_mappable_pages;
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index 3c32f840dcd2..40ab6d9c3736 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -1093,7 +1093,7 @@ static void radeon_cp_dispatch_clear(struct drm_device * dev,
 					/* judging by the first tile offset needed, could possibly
 					   directly address/clear 4x4 tiles instead of 8x2 * 4x4
 					   macro tiles, though would still need clear mask for
-					   right/bottom if truely 4x4 granularity is desired ? */
+					   right/bottom if truly 4x4 granularity is desired ? */
 					OUT_RING(tileoffset * 16);
 					/* the number of tiles to clear */
 					OUT_RING(nrtilesx + 1);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index c7320ce4567d..89c38c49066f 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -128,7 +128,7 @@ static struct attribute *ttm_bo_global_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops ttm_bo_global_ops = {
+static const struct sysfs_ops ttm_bo_global_ops = {
 	.show = &ttm_bo_global_show
 };
 
diff --git a/drivers/gpu/drm/ttm/ttm_memory.c b/drivers/gpu/drm/ttm/ttm_memory.c
index f5245c02b8fd..eb143e04d402 100644
--- a/drivers/gpu/drm/ttm/ttm_memory.c
+++ b/drivers/gpu/drm/ttm/ttm_memory.c
@@ -152,7 +152,7 @@ static struct attribute *ttm_mem_zone_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops ttm_mem_zone_ops = {
+static const struct sysfs_ops ttm_mem_zone_ops = {
 	.show = &ttm_mem_zone_show,
 	.store = &ttm_mem_zone_store
 };
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index 5935b8842e86..34079f251cd4 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -150,7 +150,7 @@ irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS)
 		cur_irq++;
 	}
 
-	/* Acknowlege interrupts */
+	/* Acknowledge interrupts */
 	VIA_WRITE(VIA_REG_INTERRUPT, status);
 
 
@@ -165,7 +165,7 @@ static __inline__ void viadrv_acknowledge_irqs(drm_via_private_t * dev_priv)
 	u32 status;
 
 	if (dev_priv) {
-		/* Acknowlege interrupts */
+		/* Acknowledge interrupts */
 		status = VIA_READ(VIA_REG_INTERRUPT);
 		VIA_WRITE(VIA_REG_INTERRUPT, status |
 			  dev_priv->irq_pending_mask);
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 79d9edd0bdfa..7a0d2e4661a1 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -68,22 +68,25 @@ static const struct {
 #define map_key_clear(c)	hid_map_usage_clear(hidinput, usage, &bit, \
 		&max, EV_KEY, (c))
 
-static inline int match_scancode(int code, int scancode)
+static inline int match_scancode(unsigned int code, unsigned int scancode)
 {
 	if (scancode == 0)
 		return 1;
-	return ((code & (HID_USAGE_PAGE | HID_USAGE)) == scancode);
+
+	return (code & (HID_USAGE_PAGE | HID_USAGE)) == scancode;
 }
 
-static inline int match_keycode(int code, int keycode)
+static inline int match_keycode(unsigned int code, unsigned int keycode)
 {
 	if (keycode == 0)
 		return 1;
-	return (code == keycode);
+
+	return code == keycode;
 }
 
 static struct hid_usage *hidinput_find_key(struct hid_device *hid,
-		int scancode, int keycode)
+					   unsigned int scancode,
+					   unsigned int keycode)
 {
 	int i, j, k;
 	struct hid_report *report;
@@ -105,8 +108,8 @@ static struct hid_usage *hidinput_find_key(struct hid_device *hid,
 	return NULL;
 }
 
-static int hidinput_getkeycode(struct input_dev *dev, int scancode,
-				int *keycode)
+static int hidinput_getkeycode(struct input_dev *dev,
+			       unsigned int scancode, unsigned int *keycode)
 {
 	struct hid_device *hid = input_get_drvdata(dev);
 	struct hid_usage *usage;
@@ -119,16 +122,13 @@ static int hidinput_getkeycode(struct input_dev *dev, int scancode,
 	return -EINVAL;
 }
 
-static int hidinput_setkeycode(struct input_dev *dev, int scancode,
-				int keycode)
+static int hidinput_setkeycode(struct input_dev *dev,
+			       unsigned int scancode, unsigned int keycode)
 {
 	struct hid_device *hid = input_get_drvdata(dev);
 	struct hid_usage *usage;
 	int old_keycode;
 
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
 	usage = hidinput_find_key(hid, scancode, 0);
 	if (usage) {
 		old_keycode = usage->code;
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 02ce9cff5fcf..d06083fdffbb 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -73,7 +73,6 @@ config I2C_SMBUS
 
 source drivers/i2c/algos/Kconfig
 source drivers/i2c/busses/Kconfig
-source drivers/i2c/chips/Kconfig
 
 config I2C_DEBUG_CORE
 	bool "I2C Core debugging messages"
@@ -98,12 +97,4 @@ config I2C_DEBUG_BUS
 	  a problem with I2C support and want to see more of what is going
 	  on.
 
-config I2C_DEBUG_CHIP
-	bool "I2C Chip debugging messages"
-	help
-	  Say Y here if you want the I2C chip drivers to produce a bunch of
-	  debug messages to the system log.  Select this if you are having
-	  a problem with I2C support and want to see more of what is going
-	  on.
-
 endif # I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index acd0250c16a0..a7d9b4be9bb3 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_I2C_BOARDINFO)	+= i2c-boardinfo.o
 obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_SMBUS)		+= i2c-smbus.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
-obj-y				+= busses/ chips/ algos/
+obj-y				+= algos/ busses/
 
 ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index e25e13980af3..e8d568c3fb09 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -522,6 +522,12 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
 	int i, ret;
 	unsigned short nak_ok;
 
+	if (adap->pre_xfer) {
+		ret = adap->pre_xfer(i2c_adap);
+		if (ret < 0)
+			return ret;
+	}
+
 	bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
 	i2c_start(adap);
 	for (i = 0; i < num; i++) {
@@ -570,6 +576,9 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
 bailout:
 	bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
 	i2c_stop(adap);
+
+	if (adap->post_xfer)
+		adap->post_xfer(i2c_adap);
 	return ret;
 }
 
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 7ce75775ec73..6b6bd06202b2 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -176,7 +176,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 	 */
 	if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp));
-		return -ENXIO; /* definetly not PCF8584 */
+		return -ENXIO; /* definitely not PCF8584 */
 	}
 
 	/* load own address in S0, effective address is (own << 1) */
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9da5b05cdb52..299b918455a3 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -416,9 +416,11 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 		data->block[0] = 32;	/* max for SMBus block reads */
 	}
 
+	/* Experience has shown that the block buffer can only be used for
+	   SMBus (not I2C) block transactions, even though the datasheet
+	   doesn't mention this limitation. */
 	if ((i801_features & FEATURE_BLOCK_BUFFER)
-	 && !(command == I2C_SMBUS_I2C_BLOCK_DATA
-	      && read_write == I2C_SMBUS_READ)
+	 && command != I2C_SMBUS_I2C_BLOCK_DATA
 	 && i801_set_block_buffer_mode() == 0)
 		result = i801_block_transaction_by_block(data, read_write,
 							 hwpec);
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 913abd7c172f..c7c237537f81 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -850,7 +850,7 @@ static const struct i2c_algorithm omap_i2c_algo = {
 	.functionality	= omap_i2c_func,
 };
 
-static int __init
+static int __devinit
 omap_i2c_probe(struct platform_device *pdev)
 {
 	struct omap_i2c_dev	*dev;
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 1c440a70ec61..b289ec99eeba 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -122,9 +122,14 @@ static s32 i2c_powermac_smbus_xfer(	struct i2c_adapter*	adap,
 
 	rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
 	if (rc) {
-		dev_err(&adap->dev,
-			"I2C transfer at 0x%02x failed, size %d, err %d\n",
-			addrdir >> 1, size, rc);
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
+		else
+			dev_err(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
 		goto bail;
 	}
 
@@ -175,10 +180,16 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 		goto bail;
 	}
 	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
-	if (rc < 0)
-		dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
-			addrdir & 1 ? "read from" : "write to", addrdir >> 1,
-			rc);
+	if (rc < 0) {
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+		else
+			dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+	}
  bail:
 	pmac_i2c_close(bus);
 	return rc < 0 ? rc : 1;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 7647a20523a0..90ffbf6f9d4f 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -12,7 +12,7 @@
  *
  *  History:
  *    Apr 2002: Initial version [CS]
- *    Jun 2002: Properly seperated algo/adap [FB]
+ *    Jun 2002: Properly separated algo/adap [FB]
  *    Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem]
  *    Jan 2003: added limited signal handling [Kai-Uwe Bloem]
  *    Sep 2004: Major rework to ensure efficient bus handling [RMK]
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index eece39a5a30e..f0ef8da6c554 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -32,6 +32,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
deleted file mode 100644
index ae4539d99bef..000000000000
--- a/drivers/i2c/chips/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Miscellaneous I2C chip drivers configuration
-#
-# *** DEPRECATED! Do not add new entries! See Makefile ***
-#
-
-menu "Miscellaneous I2C Chip support"
-
-config SENSORS_TSL2550
-	tristate "Taos TSL2550 ambient light sensor"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get support for the Taos TSL2550
-	  ambient light sensor.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called tsl2550.
-
-endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
deleted file mode 100644
index fe0af0f81f2d..000000000000
--- a/drivers/i2c/chips/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for miscellaneous I2C chip drivers.
-#
-# Do not add new drivers to this directory! It is DEPRECATED.
-#
-# Device drivers are better grouped according to the functionality they
-# implement rather than to the bus they are connected to. In particular:
-# * Hardware monitoring chip drivers go to drivers/hwmon
-# * RTC chip drivers go to drivers/rtc
-# * I/O expander drivers go to drivers/gpio
-#
-
-obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
-
-ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
-
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 421278221243..7a8201ed2181 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -22,7 +22,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/device.h>
-#include <linux/semaphore.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
 #include <linux/i2c.h>
@@ -55,7 +54,7 @@ static int smbus_do_alert(struct device *dev, void *addrp)
 	 * Drivers should either disable alerts, or provide at least
 	 * a minimal handler.  Lock so client->driver won't change.
 	 */
-	down(&dev->sem);
+	device_lock(dev);
 	if (client->driver) {
 		if (client->driver->alert)
 			client->driver->alert(client, data->flag);
@@ -63,7 +62,7 @@ static int smbus_do_alert(struct device *dev, void *addrp)
 			dev_warn(&client->dev, "no driver alert()!\n");
 	} else
 		dev_dbg(&client->dev, "alert with no driver\n");
-	up(&dev->sem);
+	device_unlock(dev);
 
 	/* Stop iterating after we find the device */
 	return -EBUSY;
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 5122b5a8aa2d..18350213479e 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -19,7 +19,6 @@
 #include <linux/moduleparam.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
-#include <linux/semaphore.h>
 #include <asm/atomic.h>
 
 #include "csr.h"
@@ -1397,9 +1396,9 @@ static int update_pdrv(struct device *dev, void *data)
 			pdrv = container_of(drv, struct hpsb_protocol_driver,
 					    driver);
 			if (pdrv->update) {
-				down(&ud->device.sem);
+				device_lock(&ud->device);
 				error = pdrv->update(ud);
-				up(&ud->device.sem);
+				device_unlock(&ud->device);
 			}
 			if (error)
 				device_release_driver(&ud->device);
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index 9555fd253865..bf47fee79808 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1452,7 +1452,7 @@ static int __devinit add_card(struct pci_dev *dev,
                                 PRINT(KERN_ERR, lynx->id, "unable to read bus info block from i2c");
                         } else {
                                 PRINT(KERN_INFO, lynx->id, "got bus info block from serial eeprom");
-				/* FIXME: probably we shoud rewrite the max_rec, max_ROM(1394a),
+				/* FIXME: probably we should rewrite the max_rec, max_ROM(1394a),
 				 * generation(1394a) and link_spd(1394a) field and recalculate
 				 * the CRC */
 
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 5130fc55b8e2..764787ebe8d8 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -3597,7 +3597,7 @@ static ssize_t cm_show_counter(struct kobject *obj, struct attribute *attr,
 		       atomic_long_read(&group->counter[cm_attr->index]));
 }
 
-static struct sysfs_ops cm_counter_ops = {
+static const struct sysfs_ops cm_counter_ops = {
 	.show = cm_show_counter
 };
 
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 58463da814d1..e351b1548535 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -2953,6 +2953,9 @@ static void ib_mad_remove_device(struct ib_device *device)
 {
 	int i, num_ports, cur_port;
 
+	if (rdma_node_get_transport(device->node_type) != RDMA_TRANSPORT_IB)
+		return;
+
 	if (device->node_type == RDMA_NODE_IB_SWITCH) {
 		num_ports = 1;
 		cur_port = 0;
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 158a214da2f7..1558bb7fc74d 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -79,7 +79,7 @@ static ssize_t port_attr_show(struct kobject *kobj,
 	return port_attr->show(p, port_attr, buf);
 }
 
-static struct sysfs_ops port_sysfs_ops = {
+static const struct sysfs_ops port_sysfs_ops = {
 	.show = port_attr_show
 };
 
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index 1b09b735c5a8..017d6e24448f 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -1336,11 +1336,8 @@ static void ib_ucm_remove_one(struct ib_device *device)
 	device_unregister(&ucm_dev->dev);
 }
 
-static ssize_t show_abi_version(struct class *class, char *buf)
-{
-	return sprintf(buf, "%d\n", IB_USER_CM_ABI_VERSION);
-}
-static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+static CLASS_ATTR_STRING(abi_version, S_IRUGO,
+			 __stringify(IB_USER_CM_ABI_VERSION));
 
 static int __init ib_ucm_init(void)
 {
@@ -1353,7 +1350,7 @@ static int __init ib_ucm_init(void)
 		goto error1;
 	}
 
-	ret = class_create_file(&cm_class, &class_attr_abi_version);
+	ret = class_create_file(&cm_class, &class_attr_abi_version.attr);
 	if (ret) {
 		printk(KERN_ERR "ucm: couldn't create abi_version attribute\n");
 		goto error2;
@@ -1367,7 +1364,7 @@ static int __init ib_ucm_init(void)
 	return 0;
 
 error3:
-	class_remove_file(&cm_class, &class_attr_abi_version);
+	class_remove_file(&cm_class, &class_attr_abi_version.attr);
 error2:
 	unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES);
 error1:
@@ -1377,7 +1374,7 @@ error1:
 static void __exit ib_ucm_cleanup(void)
 {
 	ib_unregister_client(&ucm_client);
-	class_remove_file(&cm_class, &class_attr_abi_version);
+	class_remove_file(&cm_class, &class_attr_abi_version.attr);
 	unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES);
 	if (overflow_maj)
 		unregister_chrdev_region(overflow_maj, IB_UCM_MAX_DEVICES);
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 02d360cfc2f7..04b585e86cb2 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -965,11 +965,8 @@ static ssize_t show_port(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR(port, S_IRUGO, show_port, NULL);
 
-static ssize_t show_abi_version(struct class *class, char *buf)
-{
-	return sprintf(buf, "%d\n", IB_USER_MAD_ABI_VERSION);
-}
-static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+static CLASS_ATTR_STRING(abi_version, S_IRUGO,
+			 __stringify(IB_USER_MAD_ABI_VERSION));
 
 static dev_t overflow_maj;
 static DECLARE_BITMAP(overflow_map, IB_UMAD_MAX_PORTS);
@@ -1194,7 +1191,7 @@ static int __init ib_umad_init(void)
 		goto out_chrdev;
 	}
 
-	ret = class_create_file(umad_class, &class_attr_abi_version);
+	ret = class_create_file(umad_class, &class_attr_abi_version.attr);
 	if (ret) {
 		printk(KERN_ERR "user_mad: couldn't create abi_version attribute\n");
 		goto out_class;
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 4fa2e6516441..d805cf365c8d 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -691,11 +691,8 @@ static ssize_t show_dev_abi_version(struct device *device,
 }
 static DEVICE_ATTR(abi_version, S_IRUGO, show_dev_abi_version, NULL);
 
-static ssize_t show_abi_version(struct class *class, char *buf)
-{
-	return sprintf(buf, "%d\n", IB_USER_VERBS_ABI_VERSION);
-}
-static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+static CLASS_ATTR_STRING(abi_version, S_IRUGO,
+			 __stringify(IB_USER_VERBS_ABI_VERSION));
 
 static dev_t overflow_maj;
 static DECLARE_BITMAP(overflow_map, IB_UVERBS_MAX_DEVICES);
@@ -841,7 +838,7 @@ static int __init ib_uverbs_init(void)
 		goto out_chrdev;
 	}
 
-	ret = class_create_file(uverbs_class, &class_attr_abi_version);
+	ret = class_create_file(uverbs_class, &class_attr_abi_version.attr);
 	if (ret) {
 		printk(KERN_ERR "user_verbs: couldn't create abi_version attribute\n");
 		goto out_class;
diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c
index ee1d8b4d4541..63f975f3e30f 100644
--- a/drivers/infiniband/hw/cxgb3/iwch.c
+++ b/drivers/infiniband/hw/cxgb3/iwch.c
@@ -189,6 +189,7 @@ static void close_rnic_dev(struct t3cdev *tdev)
 	list_for_each_entry_safe(dev, tmp, &dev_list, entry) {
 		if (dev->rdev.t3cdev_p == tdev) {
 			dev->rdev.flags = CXIO_ERROR_FATAL;
+			synchronize_net();
 			cancel_delayed_work_sync(&dev->db_drop_task);
 			list_del(&dev->entry);
 			iwch_unregister_device(dev);
@@ -217,6 +218,7 @@ static void iwch_event_handler(struct t3cdev *tdev, u32 evt, u32 port_id)
 	switch (evt) {
 	case OFFLOAD_STATUS_DOWN: {
 		rdev->flags = CXIO_ERROR_FATAL;
+		synchronize_net();
 		event.event  = IB_EVENT_DEVICE_FATAL;
 		dispatch = 1;
 		break;
diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h
index 5d28e3e98a20..90c4efa67586 100644
--- a/drivers/infiniband/hw/ehca/ehca_qes.h
+++ b/drivers/infiniband/hw/ehca/ehca_qes.h
@@ -46,7 +46,7 @@
 
 #include "ehca_tools.h"
 
-/* virtual scatter gather entry to specify remote adresses with length */
+/* virtual scatter gather entry to specify remote addresses with length */
 struct ehca_vsgentry {
 	u64 vaddr;
 	u32 lkey;
@@ -148,7 +148,7 @@ struct ehca_wqe {
 	u32 immediate_data;
 	union {
 		struct {
-			u64 remote_virtual_adress;
+			u64 remote_virtual_address;
 			u32 rkey;
 			u32 reserved;
 			u64 atomic_1st_op_dma_len;
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index e3ec7fdd67bd..9a3fbfca9b41 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -269,7 +269,7 @@ static inline int ehca_write_swqe(struct ehca_qp *qp,
 		/* no break is intentional here */
 	case IB_QPT_RC:
 		/* TODO: atomic not implemented */
-		wqe_p->u.nud.remote_virtual_adress =
+		wqe_p->u.nud.remote_virtual_address =
 			send_wr->wr.rdma.remote_addr;
 		wqe_p->u.nud.rkey = send_wr->wr.rdma.rkey;
 
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index ce7f53833577..925075557dc2 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -1899,9 +1899,14 @@ void nes_destroy_nic_qp(struct nes_vnic *nesvnic)
 	u16  wqe_fragment_index;
 	u64 wqe_frag;
 	u32 cqp_head;
+	u32 wqm_cfg0;
 	unsigned long flags;
 	int ret;
 
+	/* clear wqe stall before destroying NIC QP */
+	wqm_cfg0 = nes_read_indexed(nesdev, NES_IDX_WQM_CONFIG0);
+	nes_write_indexed(nesdev, NES_IDX_WQM_CONFIG0, wqm_cfg0 & 0xFFFF7FFF);
+
 	/* Free remaining NIC receive buffers */
 	while (nesvnic->nic.rq_head != nesvnic->nic.rq_tail) {
 		nic_rqe   = &nesvnic->nic.rq_vbase[nesvnic->nic.rq_tail];
@@ -2020,6 +2025,9 @@ void nes_destroy_nic_qp(struct nes_vnic *nesvnic)
 
 	pci_free_consistent(nesdev->pcidev, nesvnic->nic_mem_size, nesvnic->nic_vbase,
 			nesvnic->nic_pbase);
+
+	/* restore old wqm_cfg0 value */
+	nes_write_indexed(nesdev, NES_IDX_WQM_CONFIG0, wqm_cfg0);
 }
 
 /**
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index 9b1e7f869d83..bbbfe9fc5a5a 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -160,6 +160,7 @@ enum indexed_regs {
 	NES_IDX_ENDNODE0_NSTAT_TX_OCTETS_HI = 0x7004,
 	NES_IDX_ENDNODE0_NSTAT_TX_FRAMES_LO = 0x7008,
 	NES_IDX_ENDNODE0_NSTAT_TX_FRAMES_HI = 0x700c,
+	NES_IDX_WQM_CONFIG0 = 0x5000,
 	NES_IDX_WQM_CONFIG1 = 0x5004,
 	NES_IDX_CM_CONFIG = 0x5100,
 	NES_IDX_NIC_LOGPORT_TO_PHYPORT = 0x6000,
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index a1d79b6856ac..91fdde382e82 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1595,7 +1595,6 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
 	struct nes_vnic *nesvnic;
 	struct net_device *netdev;
 	struct nic_qp_map *curr_qp_map;
-	u32 u32temp;
 	u8 phy_type = nesdev->nesadapter->phy_type[nesdev->mac_index];
 
 	netdev = alloc_etherdev(sizeof(struct nes_vnic));
@@ -1707,6 +1706,10 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
 	     ((phy_type == NES_PHY_TYPE_PUMA_1G) &&
 	      (((PCI_FUNC(nesdev->pcidev->devfn) == 1) && (nesdev->mac_index == 2)) ||
 	       ((PCI_FUNC(nesdev->pcidev->devfn) == 2) && (nesdev->mac_index == 1)))))) {
+		u32 u32temp;
+		u32 link_mask;
+		u32 link_val;
+
 		u32temp = nes_read_indexed(nesdev, NES_IDX_PHY_PCS_CONTROL_STATUS0 +
 				(0x200 * (nesdev->mac_index & 1)));
 		if (phy_type != NES_PHY_TYPE_PUMA_1G) {
@@ -1715,13 +1718,36 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
 				(0x200 * (nesdev->mac_index & 1)), u32temp);
 		}
 
+		/* Check and set linkup here.  This is for back to back */
+		/* configuration where second port won't get link interrupt */
+		switch (phy_type) {
+		case NES_PHY_TYPE_PUMA_1G:
+			if (nesdev->mac_index < 2) {
+				link_mask = 0x01010000;
+				link_val = 0x01010000;
+			} else {
+				link_mask = 0x02020000;
+				link_val = 0x02020000;
+			}
+			break;
+		default:
+			link_mask = 0x0f1f0000;
+			link_val = 0x0f0f0000;
+			break;
+		}
+
+		u32temp = nes_read_indexed(nesdev,
+					   NES_IDX_PHY_PCS_CONTROL_STATUS0 +
+					   (0x200 * (nesdev->mac_index & 1)));
+		if ((u32temp & link_mask) == link_val)
+			nesvnic->linkup = 1;
+
 		/* clear the MAC interrupt status, assumes direct logical to physical mapping */
 		u32temp = nes_read_indexed(nesdev, NES_IDX_MAC_INT_STATUS + (0x200 * nesdev->mac_index));
 		nes_debug(NES_DBG_INIT, "Phy interrupt status = 0x%X.\n", u32temp);
 		nes_write_indexed(nesdev, NES_IDX_MAC_INT_STATUS + (0x200 * nesdev->mac_index), u32temp);
 
 		nes_init_phy(nesdev);
-
 	}
 
 	return netdev;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 815725f886c4..69928296d74b 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1323,6 +1323,7 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd,
 			nesqp->nesqp_context->aeq_token_low =  cpu_to_le32((u32)((unsigned long)(nesqp)));
 			nesqp->nesqp_context->aeq_token_high =  cpu_to_le32((u32)(upper_32_bits((unsigned long)(nesqp))));
 			nesqp->nesqp_context->ird_ord_sizes = cpu_to_le32(NES_QPCONTEXT_ORDIRD_ALSMM |
+					NES_QPCONTEXT_ORDIRD_AAH |
 					((((u32)nesadapter->max_irrq_wr) <<
 					NES_QPCONTEXT_ORDIRD_IRDSIZE_SHIFT) & NES_QPCONTEXT_ORDIRD_IRDSIZE_MASK));
 			if (disable_mpa_crc) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 83a7751c38d6..bc658373ad55 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -708,6 +708,7 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct ipoib_cm_tx_buf *tx_req;
 	u64 addr;
+	int rc;
 
 	if (unlikely(skb->len > tx->mtu)) {
 		ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
@@ -739,9 +740,10 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 
 	tx_req->mapping = addr;
 
-	if (unlikely(post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1),
-			       addr, skb->len))) {
-		ipoib_warn(priv, "post_send failed\n");
+	rc = post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1),
+		       addr, skb->len);
+	if (unlikely(rc)) {
+		ipoib_warn(priv, "post_send failed, error %d\n", rc);
 		++dev->stats.tx_errors;
 		ib_dma_unmap_single(priv->ca, addr, skb->len, DMA_TO_DEVICE);
 		dev_kfree_skb_any(skb);
@@ -752,6 +754,8 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 		if (++priv->tx_outstanding == ipoib_sendq_size) {
 			ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n",
 				  tx->qp->qp_num);
+			if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP))
+				ipoib_warn(priv, "request notify on send CQ failed\n");
 			netif_stop_queue(dev);
 		}
 	}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 8c91d9f37ada..5df40b128f81 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -529,7 +529,7 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
 {
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct ipoib_tx_buf *tx_req;
-	int hlen;
+	int hlen, rc;
 	void *phead;
 
 	if (skb_is_gso(skb)) {
@@ -585,9 +585,10 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
 		netif_stop_queue(dev);
 	}
 
-	if (unlikely(post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
-			       address->ah, qpn, tx_req, phead, hlen))) {
-		ipoib_warn(priv, "post_send failed\n");
+	rc = post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
+		       address->ah, qpn, tx_req, phead, hlen);
+	if (unlikely(rc)) {
+		ipoib_warn(priv, "post_send failed, error %d\n", rc);
 		++dev->stats.tx_errors;
 		--priv->tx_outstanding;
 		ipoib_dma_unmap_tx(priv->ca, tx_req);
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 9f9816baeb97..2ee6c7a68bdc 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -515,7 +515,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 	struct input_absinfo abs;
 	struct ff_effect effect;
 	int __user *ip = (int __user *)p;
-	int i, t, u, v;
+	unsigned int i, t, u, v;
 	int error;
 
 	switch (cmd) {
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 41168d5f8c17..e2aad0a51826 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -582,7 +582,8 @@ static int input_fetch_keycode(struct input_dev *dev, int scancode)
 }
 
 static int input_default_getkeycode(struct input_dev *dev,
-				    int scancode, int *keycode)
+				    unsigned int scancode,
+				    unsigned int *keycode)
 {
 	if (!dev->keycodesize)
 		return -EINVAL;
@@ -596,7 +597,8 @@ static int input_default_getkeycode(struct input_dev *dev,
 }
 
 static int input_default_setkeycode(struct input_dev *dev,
-				    int scancode, int keycode)
+				    unsigned int scancode,
+				    unsigned int keycode)
 {
 	int old_keycode;
 	int i;
@@ -654,11 +656,9 @@ static int input_default_setkeycode(struct input_dev *dev,
  * This function should be called by anyone interested in retrieving current
  * keymap. Presently keyboard and evdev handlers use it.
  */
-int input_get_keycode(struct input_dev *dev, int scancode, int *keycode)
+int input_get_keycode(struct input_dev *dev,
+		      unsigned int scancode, unsigned int *keycode)
 {
-	if (scancode < 0)
-		return -EINVAL;
-
 	return dev->getkeycode(dev, scancode, keycode);
 }
 EXPORT_SYMBOL(input_get_keycode);
@@ -672,16 +672,14 @@ EXPORT_SYMBOL(input_get_keycode);
  * This function should be called by anyone needing to update current
  * keymap. Presently keyboard and evdev handlers use it.
  */
-int input_set_keycode(struct input_dev *dev, int scancode, int keycode)
+int input_set_keycode(struct input_dev *dev,
+		      unsigned int scancode, unsigned int keycode)
 {
 	unsigned long flags;
 	int old_keycode;
 	int retval;
 
-	if (scancode < 0)
-		return -EINVAL;
-
-	if (keycode < 0 || keycode > KEY_MAX)
+	if (keycode > KEY_MAX)
 		return -EINVAL;
 
 	spin_lock_irqsave(&dev->event_lock, flags);
@@ -1881,35 +1879,37 @@ static int input_open_file(struct inode *inode, struct file *file)
 	const struct file_operations *old_fops, *new_fops = NULL;
 	int err;
 
-	lock_kernel();
+	err = mutex_lock_interruptible(&input_mutex);
+	if (err)
+		return err;
+
 	/* No load-on-demand here? */
 	handler = input_table[iminor(inode) >> 5];
-	if (!handler || !(new_fops = fops_get(handler->fops))) {
-		err = -ENODEV;
-		goto out;
-	}
+	if (handler)
+		new_fops = fops_get(handler->fops);
+
+	mutex_unlock(&input_mutex);
 
 	/*
 	 * That's _really_ odd. Usually NULL ->open means "nothing special",
 	 * not "no device". Oh, well...
 	 */
-	if (!new_fops->open) {
+	if (!new_fops || !new_fops->open) {
 		fops_put(new_fops);
 		err = -ENODEV;
 		goto out;
 	}
+
 	old_fops = file->f_op;
 	file->f_op = new_fops;
 
 	err = new_fops->open(inode, file);
-
 	if (err) {
 		fops_put(file->f_op);
 		file->f_op = fops_get(old_fops);
 	}
 	fops_put(old_fops);
 out:
-	unlock_kernel();
 	return err;
 }
 
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index ae998d99a5ae..7a55714a1486 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -819,7 +819,7 @@ static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type)
 	int i;
 	int err;
 
-	if (pad_type < 1 || pad_type > GC_MAX) {
+	if (pad_type < 1 || pad_type >= GC_MAX) {
 		pr_err("Pad type %d unknown\n", pad_type);
 		return -EINVAL;
 	}
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index fe376a27fe57..593c052416b9 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -162,7 +162,7 @@ static irqreturn_t bfin_kpad_isr(int irq, void *dev_id)
 	input_sync(input);
 
 	if (bfin_kpad_get_keypressed(bf54x_kpad)) {
-		disable_irq(bf54x_kpad->irq);
+		disable_irq_nosync(bf54x_kpad->irq);
 		bf54x_kpad->lastkey = key;
 		mod_timer(&bf54x_kpad->timer,
 			  jiffies + bf54x_kpad->keyup_test_jiffies);
diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
index 9caed30f3bbb..b1ab29861e1c 100644
--- a/drivers/input/keyboard/locomokbd.c
+++ b/drivers/input/keyboard/locomokbd.c
@@ -192,11 +192,18 @@ static void locomokbd_scankeyboard(struct locomokbd *locomokbd)
 static irqreturn_t locomokbd_interrupt(int irq, void *dev_id)
 {
 	struct locomokbd *locomokbd = dev_id;
+	u16 r;
+
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC);
+	if ((r & 0x0001) == 0)
+		return IRQ_HANDLED;
+
+	locomo_writel(r & ~0x0100, locomokbd->base + LOCOMO_KIC); /* Ack */
+
 	/** wait chattering delay **/
 	udelay(100);
 
 	locomokbd_scankeyboard(locomokbd);
-
 	return IRQ_HANDLED;
 }
 
@@ -210,6 +217,25 @@ static void locomokbd_timer_callback(unsigned long data)
 	locomokbd_scankeyboard(locomokbd);
 }
 
+static int locomokbd_open(struct input_dev *dev)
+{
+	struct locomokbd *locomokbd = input_get_drvdata(dev);
+	u16 r;
+	
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC) | 0x0010;
+	locomo_writel(r, locomokbd->base + LOCOMO_KIC);
+	return 0;
+}
+
+static void locomokbd_close(struct input_dev *dev)
+{
+	struct locomokbd *locomokbd = input_get_drvdata(dev);
+	u16 r;
+	
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC) & ~0x0010;
+	locomo_writel(r, locomokbd->base + LOCOMO_KIC);
+}
+
 static int __devinit locomokbd_probe(struct locomo_dev *dev)
 {
 	struct locomokbd *locomokbd;
@@ -253,6 +279,8 @@ static int __devinit locomokbd_probe(struct locomo_dev *dev)
 	input_dev->id.vendor = 0x0001;
 	input_dev->id.product = 0x0001;
 	input_dev->id.version = 0x0100;
+	input_dev->open = locomokbd_open;
+	input_dev->close = locomokbd_close;
 	input_dev->dev.parent = &dev->dev;
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
@@ -261,6 +289,8 @@ static int __devinit locomokbd_probe(struct locomo_dev *dev)
 	input_dev->keycodesize = sizeof(locomokbd_keycode[0]);
 	input_dev->keycodemax = ARRAY_SIZE(locomokbd_keycode);
 
+	input_set_drvdata(input_dev, locomokbd);
+
 	memcpy(locomokbd->keycode, locomokbd_keycode, sizeof(locomokbd->keycode));
 	for (i = 0; i < LOCOMOKBD_NUMKEYS; i++)
 		set_bit(locomokbd->keycode[i], input_dev->keybit);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7097bfe581d7..23140a3bb8e0 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -214,6 +214,17 @@ config INPUT_TWL4030_PWRBUTTON
 	  To compile this driver as a module, choose M here. The module will
 	  be called twl4030_pwrbutton.
 
+config INPUT_TWL4030_VIBRA
+	tristate "Support for TWL4030 Vibrator"
+	depends on TWL4030_CORE
+	select TWL4030_CODEC
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables support for TWL4030 Vibrator Driver.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called twl4030_vibra.
+
 config INPUT_UINPUT
 	tristate "User level driver support"
 	help
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index b611615e24ad..7e95a5d474dc 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
+obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winbond-cir.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index 0501f0e65157..15be5430bc6d 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -474,10 +474,11 @@ static void ati_remote2_complete_key(struct urb *urb)
 }
 
 static int ati_remote2_getkeycode(struct input_dev *idev,
-				  int scancode, int *keycode)
+				  unsigned int scancode, unsigned int *keycode)
 {
 	struct ati_remote2 *ar2 = input_get_drvdata(idev);
-	int index, mode;
+	unsigned int mode;
+	int index;
 
 	mode = scancode >> 8;
 	if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
@@ -491,10 +492,12 @@ static int ati_remote2_getkeycode(struct input_dev *idev,
 	return 0;
 }
 
-static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keycode)
+static int ati_remote2_setkeycode(struct input_dev *idev,
+				  unsigned int scancode, unsigned int keycode)
 {
 	struct ati_remote2 *ar2 = input_get_drvdata(idev);
-	int index, mode, old_keycode;
+	unsigned int mode, old_keycode;
+	int index;
 
 	mode = scancode >> 8;
 	if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
@@ -504,9 +507,6 @@ static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keyc
 	if (index < 0)
 		return -EINVAL;
 
-	if (keycode < KEY_RESERVED || keycode > KEY_MAX)
-		return -EINVAL;
-
 	old_keycode = ar2->keycode[mode][index];
 	ar2->keycode[mode][index] = keycode;
 	__set_bit(keycode, idev->keybit);
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
new file mode 100644
index 000000000000..2fb79e064da3
--- /dev/null
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -0,0 +1,297 @@
+/*
+ * twl4030-vibra.c - TWL4030 Vibrator driver
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Written by Henrik Saari <henrik.saari@nokia.com>
+ * Updates by Felipe Balbi <felipe.balbi@nokia.com>
+ * Input by Jari Vanhala <ext-jari.vanhala@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/i2c/twl.h>
+#include <linux/mfd/twl4030-codec.h>
+#include <linux/input.h>
+
+/* MODULE ID2 */
+#define LEDEN		0x00
+
+/* ForceFeedback */
+#define EFFECT_DIR_180_DEG	0x8000 /* range is 0 - 0xFFFF */
+
+struct vibra_info {
+	struct device		*dev;
+	struct input_dev	*input_dev;
+
+	struct workqueue_struct *workqueue;
+	struct work_struct	play_work;
+
+	bool			enabled;
+	int			speed;
+	int			direction;
+
+	bool			coexist;
+};
+
+static void vibra_disable_leds(void)
+{
+	u8 reg;
+
+	/* Disable LEDA & LEDB, cannot be used with vibra (PWM) */
+	twl_i2c_read_u8(TWL4030_MODULE_LED, &reg, LEDEN);
+	reg &= ~0x03;
+	twl_i2c_write_u8(TWL4030_MODULE_LED, LEDEN, reg);
+}
+
+/* Powers H-Bridge and enables audio clk */
+static void vibra_enable(struct vibra_info *info)
+{
+	u8 reg;
+
+	twl4030_codec_enable_resource(TWL4030_CODEC_RES_POWER);
+
+	/* turn H-Bridge on */
+	twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+			&reg, TWL4030_REG_VIBRA_CTL);
+	twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+			 (reg | TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL);
+
+	twl4030_codec_enable_resource(TWL4030_CODEC_RES_APLL);
+
+	info->enabled = true;
+}
+
+static void vibra_disable(struct vibra_info *info)
+{
+	u8 reg;
+
+	/* Power down H-Bridge */
+	twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+			&reg, TWL4030_REG_VIBRA_CTL);
+	twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+			 (reg & ~TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL);
+
+	twl4030_codec_disable_resource(TWL4030_CODEC_RES_POWER);
+	twl4030_codec_disable_resource(TWL4030_CODEC_RES_APLL);
+
+	info->enabled = false;
+}
+
+static void vibra_play_work(struct work_struct *work)
+{
+	struct vibra_info *info = container_of(work,
+			struct vibra_info, play_work);
+	int dir;
+	int pwm;
+	u8 reg;
+
+	dir = info->direction;
+	pwm = info->speed;
+
+	twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+			&reg, TWL4030_REG_VIBRA_CTL);
+	if (pwm && (!info->coexist || !(reg & TWL4030_VIBRA_SEL))) {
+
+		if (!info->enabled)
+			vibra_enable(info);
+
+		/* set vibra rotation direction */
+		twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+				&reg, TWL4030_REG_VIBRA_CTL);
+		reg = (dir) ? (reg | TWL4030_VIBRA_DIR) :
+			(reg & ~TWL4030_VIBRA_DIR);
+		twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+				 reg, TWL4030_REG_VIBRA_CTL);
+
+		/* set PWM, 1 = max, 255 = min */
+		twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+				 256 - pwm, TWL4030_REG_VIBRA_SET);
+	} else {
+		if (info->enabled)
+			vibra_disable(info);
+	}
+}
+
+/*** Input/ForceFeedback ***/
+
+static int vibra_play(struct input_dev *input, void *data,
+		      struct ff_effect *effect)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	info->speed = effect->u.rumble.strong_magnitude >> 8;
+	if (!info->speed)
+		info->speed = effect->u.rumble.weak_magnitude >> 9;
+	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 0 : 1;
+	queue_work(info->workqueue, &info->play_work);
+	return 0;
+}
+
+static int twl4030_vibra_open(struct input_dev *input)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	info->workqueue = create_singlethread_workqueue("vibra");
+	if (info->workqueue == NULL) {
+		dev_err(&input->dev, "couldn't create workqueue\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void twl4030_vibra_close(struct input_dev *input)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	cancel_work_sync(&info->play_work);
+	INIT_WORK(&info->play_work, vibra_play_work); /* cleanup */
+	destroy_workqueue(info->workqueue);
+	info->workqueue = NULL;
+
+	if (info->enabled)
+		vibra_disable(info);
+}
+
+/*** Module ***/
+#if CONFIG_PM
+static int twl4030_vibra_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vibra_info *info = platform_get_drvdata(pdev);
+
+	if (info->enabled)
+		vibra_disable(info);
+
+	return 0;
+}
+
+static int twl4030_vibra_resume(struct device *dev)
+{
+	vibra_disable_leds();
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops,
+			 twl4030_vibra_suspend, twl4030_vibra_resume);
+#endif
+
+static int __devinit twl4030_vibra_probe(struct platform_device *pdev)
+{
+	struct twl4030_codec_vibra_data *pdata = pdev->dev.platform_data;
+	struct vibra_info *info;
+	int ret;
+
+	if (!pdata) {
+		dev_dbg(&pdev->dev, "platform_data not available\n");
+		return -EINVAL;
+	}
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = &pdev->dev;
+	info->coexist = pdata->coexist;
+	INIT_WORK(&info->play_work, vibra_play_work);
+
+	info->input_dev = input_allocate_device();
+	if (info->input_dev == NULL) {
+		dev_err(&pdev->dev, "couldn't allocate input device\n");
+		ret = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	input_set_drvdata(info->input_dev, info);
+
+	info->input_dev->name = "twl4030:vibrator";
+	info->input_dev->id.version = 1;
+	info->input_dev->dev.parent = pdev->dev.parent;
+	info->input_dev->open = twl4030_vibra_open;
+	info->input_dev->close = twl4030_vibra_close;
+	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
+
+	ret = input_ff_create_memless(info->input_dev, NULL, vibra_play);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "couldn't register vibrator to FF\n");
+		goto err_ialloc;
+	}
+
+	ret = input_register_device(info->input_dev);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "couldn't register input device\n");
+		goto err_iff;
+	}
+
+	vibra_disable_leds();
+
+	platform_set_drvdata(pdev, info);
+	return 0;
+
+err_iff:
+	input_ff_destroy(info->input_dev);
+err_ialloc:
+	input_free_device(info->input_dev);
+err_kzalloc:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit twl4030_vibra_remove(struct platform_device *pdev)
+{
+	struct vibra_info *info = platform_get_drvdata(pdev);
+
+	/* this also free ff-memless and calls close if needed */
+	input_unregister_device(info->input_dev);
+	kfree(info);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver twl4030_vibra_driver = {
+	.probe		= twl4030_vibra_probe,
+	.remove		= __devexit_p(twl4030_vibra_remove),
+	.driver		= {
+		.name	= "twl4030_codec_vibra",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &twl4030_vibra_pm_ops,
+#endif
+	},
+};
+
+static int __init twl4030_vibra_init(void)
+{
+	return platform_driver_register(&twl4030_vibra_driver);
+}
+module_init(twl4030_vibra_init);
+
+static void __exit twl4030_vibra_exit(void)
+{
+	platform_driver_unregister(&twl4030_vibra_driver);
+}
+module_exit(twl4030_vibra_exit);
+
+MODULE_ALIAS("platform:twl4030_codec_vibra");
+
+MODULE_DESCRIPTION("TWL4030 Vibra driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nokia Corporation");
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
index cbec3dfdd42b..9c155a43abc2 100644
--- a/drivers/input/misc/winbond-cir.c
+++ b/drivers/input/misc/winbond-cir.c
@@ -385,26 +385,24 @@ wbcir_do_getkeycode(struct wbcir_data *data, u32 scancode)
 }
 
 static int
-wbcir_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+wbcir_getkeycode(struct input_dev *dev,
+		 unsigned int scancode, unsigned int *keycode)
 {
 	struct wbcir_data *data = input_get_drvdata(dev);
 
-	*keycode = (int)wbcir_do_getkeycode(data, (u32)scancode);
+	*keycode = wbcir_do_getkeycode(data, scancode);
 	return 0;
 }
 
 static int
-wbcir_setkeycode(struct input_dev *dev, int sscancode, int keycode)
+wbcir_setkeycode(struct input_dev *dev,
+		 unsigned int scancode, unsigned int keycode)
 {
 	struct wbcir_data *data = input_get_drvdata(dev);
 	struct wbcir_keyentry *keyentry;
 	struct wbcir_keyentry *new_keyentry;
 	unsigned long flags;
 	unsigned int old_keycode = KEY_RESERVED;
-	u32 scancode = (u32)sscancode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
 
 	new_keyentry = kmalloc(sizeof(*new_keyentry), GFP_KERNEL);
 	if (!new_keyentry)
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
index ba4f5dd7c60e..1e54bce72db5 100644
--- a/drivers/input/misc/wm831x-on.c
+++ b/drivers/input/misc/wm831x-on.c
@@ -97,8 +97,9 @@ static int __devinit wm831x_on_probe(struct platform_device *pdev)
 	wm831x_on->dev->phys = "wm831x_on/input0";
 	wm831x_on->dev->dev.parent = &pdev->dev;
 
-	ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq,
-				 IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on);
+	ret = request_threaded_irq(irq, NULL, wm831x_on_irq,
+				   IRQF_TRIGGER_RISING, "wm831x_on",
+				   wm831x_on);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret);
 		goto err_input_dev;
@@ -114,7 +115,7 @@ static int __devinit wm831x_on_probe(struct platform_device *pdev)
 	return 0;
 
 err_irq:
-	wm831x_free_irq(wm831x, irq, NULL);
+	free_irq(irq, wm831x_on);
 err_input_dev:
 	input_free_device(wm831x_on->dev);
 err:
@@ -127,7 +128,7 @@ static int __devexit wm831x_on_remove(struct platform_device *pdev)
 	struct wm831x_on *wm831x_on = platform_get_drvdata(pdev);
 	int irq = platform_get_irq(pdev, 0);
 
-	wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on);
+	free_irq(irq, wm831x_on);
 	cancel_delayed_work_sync(&wm831x_on->work);
 	input_unregister_device(wm831x_on->dev);
 	kfree(wm831x_on);
diff --git a/drivers/input/misc/yealink.h b/drivers/input/misc/yealink.h
index 48af0be9cbdf..1e0f52397010 100644
--- a/drivers/input/misc/yealink.h
+++ b/drivers/input/misc/yealink.h
@@ -127,7 +127,7 @@ struct yld_ctl_packet {
  * yld_status struct.
  */
 
-/* LCD, each segment must be driven seperately.
+/* LCD, each segment must be driven separately.
  *
  * Layout:
  *
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index f93c2c0daf1f..7490f1da4a53 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -63,6 +63,8 @@ static const struct alps_model_info alps_model_data[] = {
 	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
 	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },	  /* Dell Vostro 1400 */
+	{ { 0x52, 0x01, 0x14 }, 0xff, 0xff,
+		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },	  /* Toshiba Tecra A11-11L */
 };
 
 /*
@@ -118,40 +120,27 @@ static void alps_report_buttons(struct psmouse *psmouse,
 				struct input_dev *dev1, struct input_dev *dev2,
 				int left, int right, int middle)
 {
-	struct alps_data *priv = psmouse->private;
-	const struct alps_model_info *model = priv->i;
-
-	if (model->flags & ALPS_PS2_INTERLEAVED) {
-		struct input_dev *dev;
+	struct input_dev *dev;
 
-		/*
-		 * If shared button has already been reported on the
-		 * other device (dev2) then this event should be also
-		 * sent through that device.
-		 */
-		dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
-		input_report_key(dev, BTN_LEFT, left);
+	/*
+	 * If shared button has already been reported on the
+	 * other device (dev2) then this event should be also
+	 * sent through that device.
+	 */
+	dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
+	input_report_key(dev, BTN_LEFT, left);
 
-		dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
-		input_report_key(dev, BTN_RIGHT, right);
+	dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
+	input_report_key(dev, BTN_RIGHT, right);
 
-		dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
-		input_report_key(dev, BTN_MIDDLE, middle);
+	dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
+	input_report_key(dev, BTN_MIDDLE, middle);
 
-		/*
-		 * Sync the _other_ device now, we'll do the first
-		 * device later once we report the rest of the events.
-		 */
-		input_sync(dev2);
-	} else {
-		/*
-		 * For devices with non-interleaved packets we know what
-		 * device buttons belong to so we can simply report them.
-		 */
-		input_report_key(dev1, BTN_LEFT, left);
-		input_report_key(dev1, BTN_RIGHT, right);
-		input_report_key(dev1, BTN_MIDDLE, middle);
-	}
+	/*
+	 * Sync the _other_ device now, we'll do the first
+	 * device later once we report the rest of the events.
+	 */
+	input_sync(dev2);
 }
 
 static void alps_process_packet(struct psmouse *psmouse)
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 908b5b44052f..53ec7ddd1826 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -205,8 +205,8 @@ struct atp {
 	bool			overflow_warned;
 	int			x_old;		/* last reported x/y, */
 	int			y_old;		/* used for smoothing */
-	signed char		xy_cur[ATP_XSENSORS + ATP_YSENSORS];
-	signed char		xy_old[ATP_XSENSORS + ATP_YSENSORS];
+	u8			xy_cur[ATP_XSENSORS + ATP_YSENSORS];
+	u8			xy_old[ATP_XSENSORS + ATP_YSENSORS];
 	int			xy_acc[ATP_XSENSORS + ATP_YSENSORS];
 	int			idlecount;	/* number of empty packets */
 	struct work_struct	work;
@@ -531,7 +531,7 @@ static void atp_complete_geyser_1_2(struct urb *urb)
 
 	for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
 		/* accumulate the change */
-		signed char change = dev->xy_old[i] - dev->xy_cur[i];
+		int change = dev->xy_old[i] - dev->xy_cur[i];
 		dev->xy_acc[i] -= change;
 
 		/* prevent down drifting */
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index a13d80f7da17..f34b22bce4ff 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -15,7 +15,6 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -542,10 +541,8 @@ static int mousedev_open(struct inode *inode, struct file *file)
 	if (i >= MOUSEDEV_MINORS)
 		return -ENODEV;
 
-	lock_kernel();
 	error = mutex_lock_interruptible(&mousedev_table_mutex);
 	if (error) {
-		unlock_kernel();
 		return error;
 	}
 	mousedev = mousedev_table[i];
@@ -554,7 +551,6 @@ static int mousedev_open(struct inode *inode, struct file *file)
 	mutex_unlock(&mousedev_table_mutex);
 
 	if (!mousedev) {
-		unlock_kernel();
 		return -ENODEV;
 	}
 
@@ -575,7 +571,6 @@ static int mousedev_open(struct inode *inode, struct file *file)
 		goto err_free_client;
 
 	file->private_data = client;
-	unlock_kernel();
 	return 0;
 
  err_free_client:
@@ -583,7 +578,6 @@ static int mousedev_open(struct inode *inode, struct file *file)
 	kfree(client);
  err_put_mousedev:
 	put_device(&mousedev->dev);
-	unlock_kernel();
 	return error;
 }
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 2a5982e532f8..ead0494721d0 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -442,6 +442,13 @@ static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
 		},
 	},
 	{
+		/* Medion Akoya E1222 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E122X"),
+		},
+	},
+	{
 		/* Mivvy M310 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"),
@@ -624,6 +631,9 @@ static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *
 		strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
 	}
 
+	/* Keyboard ports are always supposed to be wakeup-enabled */
+	device_set_wakeup_enable(&dev->dev, true);
+
 	i8042_pnp_kbd_devices++;
 	return 0;
 }
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index b54aee7cd9e3..9302ba0e48f8 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -430,7 +430,7 @@ static bool i8042_filter(unsigned char data, unsigned char str,
 	}
 
 	if (i8042_platform_filter && i8042_platform_filter(data, str, serio)) {
-		dbg("Filtered out by platfrom filter\n");
+		dbg("Filtered out by platform filter\n");
 		return true;
 	}
 
@@ -1386,6 +1386,8 @@ static int __init i8042_probe(struct platform_device *dev)
 {
 	int error;
 
+	i8042_platform_device = dev;
+
 	error = i8042_controller_selftest();
 	if (error)
 		return error;
@@ -1421,6 +1423,7 @@ static int __init i8042_probe(struct platform_device *dev)
 	i8042_free_aux_ports();	/* in case KBD failed but AUX not */
 	i8042_free_irqs();
 	i8042_controller_reset();
+	i8042_platform_device = NULL;
 
 	return error;
 }
@@ -1430,6 +1433,7 @@ static int __devexit i8042_remove(struct platform_device *dev)
 	i8042_unregister_ports();
 	i8042_free_irqs();
 	i8042_controller_reset();
+	i8042_platform_device = NULL;
 
 	return 0;
 }
@@ -1448,6 +1452,7 @@ static struct platform_driver i8042_driver = {
 
 static int __init i8042_init(void)
 {
+	struct platform_device *pdev;
 	int err;
 
 	dbg_init();
@@ -1460,31 +1465,18 @@ static int __init i8042_init(void)
 	if (err)
 		goto err_platform_exit;
 
-	i8042_platform_device = platform_device_alloc("i8042", -1);
-	if (!i8042_platform_device) {
-		err = -ENOMEM;
+	pdev = platform_create_bundle(&i8042_driver, i8042_probe, NULL, 0, NULL, 0);
+	if (IS_ERR(pdev)) {
+		err = PTR_ERR(pdev);
 		goto err_platform_exit;
 	}
 
-	err = platform_device_add(i8042_platform_device);
-	if (err)
-		goto err_free_device;
-
-	err = platform_driver_probe(&i8042_driver, i8042_probe);
-	if (err)
-		goto err_del_device;
-
 	panic_blink = i8042_panic_blink;
 
 	return 0;
 
- err_del_device:
-	platform_device_del(i8042_platform_device);
- err_free_device:
-	platform_device_put(i8042_platform_device);
  err_platform_exit:
 	i8042_platform_exit();
-
 	return err;
 }
 
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index 27fdaaffbb40..998664854440 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -81,12 +81,12 @@ static int serio_raw_open(struct inode *inode, struct file *file)
 	struct serio_raw_list *list;
 	int retval = 0;
 
-	lock_kernel();
 	retval = mutex_lock_interruptible(&serio_raw_mutex);
 	if (retval)
-		goto out_bkl;
+		return retval;
 
-	if (!(serio_raw = serio_raw_locate(iminor(inode)))) {
+	serio_raw = serio_raw_locate(iminor(inode));
+	if (!serio_raw) {
 		retval = -ENODEV;
 		goto out;
 	}
@@ -96,7 +96,8 @@ static int serio_raw_open(struct inode *inode, struct file *file)
 		goto out;
 	}
 
-	if (!(list = kzalloc(sizeof(struct serio_raw_list), GFP_KERNEL))) {
+	list = kzalloc(sizeof(struct serio_raw_list), GFP_KERNEL);
+	if (!list) {
 		retval = -ENOMEM;
 		goto out;
 	}
@@ -109,8 +110,6 @@ static int serio_raw_open(struct inode *inode, struct file *file)
 
 out:
 	mutex_unlock(&serio_raw_mutex);
-out_bkl:
-	unlock_kernel();
 	return retval;
 }
 
diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
index fbd3987af57f..e6bde55e5203 100644
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -64,7 +64,8 @@ struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev,
 EXPORT_SYMBOL(sparse_keymap_entry_from_keycode);
 
 static int sparse_keymap_getkeycode(struct input_dev *dev,
-				    int scancode, int *keycode)
+				    unsigned int scancode,
+				    unsigned int *keycode)
 {
 	const struct key_entry *key =
 			sparse_keymap_entry_from_scancode(dev, scancode);
@@ -78,7 +79,8 @@ static int sparse_keymap_getkeycode(struct input_dev *dev,
 }
 
 static int sparse_keymap_setkeycode(struct input_dev *dev,
-				    int scancode, int keycode)
+				    unsigned int scancode,
+				    unsigned int keycode)
 {
 	struct key_entry *key;
 	int old_keycode;
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 7d005a3616d7..4be039d7dcad 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -362,7 +362,7 @@ static const int macroKeyEvents[] = {
 };
 
 /***********************************************************************
- * Map values to strings and back. Every map shoudl have the following
+ * Map values to strings and back. Every map should have the following
  * as its last element: { NULL, AIPTEK_INVALID_VALUE }.
  */
 #define AIPTEK_INVALID_VALUE	-1
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index a1770e6feeec..8b5d2873f0c4 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -371,7 +371,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 					} else if (pen) {
 						/* penabled only accepts exact bytes of data */
 						if (features->type == TABLETPC2FG)
-							features->pktlen = WACOM_PKGLEN_PENABLED;
+							features->pktlen = WACOM_PKGLEN_GRAPHIRE;
 						features->device_type = BTN_TOOL_PEN;
 						features->x_max =
 							wacom_le16_to_cpu(&report[i + 3]);
@@ -410,7 +410,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 					} else if (pen) {
 						/* penabled only accepts exact bytes of data */
 						if (features->type == TABLETPC2FG)
-							features->pktlen = WACOM_PKGLEN_PENABLED;
+							features->pktlen = WACOM_PKGLEN_GRAPHIRE;
 						features->device_type = BTN_TOOL_PEN;
 						features->y_max =
 							wacom_le16_to_cpu(&report[i + 3]);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 3d81443e683a..b3ba3437a2eb 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -155,19 +155,19 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 {
 	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
-	int x, y, rw;
-	static int penData = 0;
+	int x, y, prox;
+	int rw = 0;
+	int retval = 0;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
 		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
-		return 0;
+		goto exit;
 	}
 
-	if (data[1] & 0x80) {
-		/* in prox and not a pad data */
-		penData = 1;
-
-		switch ((data[1] >> 5) & 3) {
+	prox = data[1] & 0x80;
+	if (prox || wacom->id[0]) {
+		if (prox) {
+			switch ((data[1] >> 5) & 3) {
 
 			case 0:	/* Pen */
 				wacom->tool[0] = BTN_TOOL_PEN;
@@ -181,23 +181,13 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 
 			case 2: /* Mouse with wheel */
 				wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
-				if (features->type == WACOM_G4 || features->type == WACOM_MO) {
-					rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
-					wacom_report_rel(wcombo, REL_WHEEL, -rw);
-				} else
-					wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]);
 				/* fall through */
 
 			case 3: /* Mouse without wheel */
 				wacom->tool[0] = BTN_TOOL_MOUSE;
 				wacom->id[0] = CURSOR_DEVICE_ID;
-				wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
-				wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
-				if (features->type == WACOM_G4 || features->type == WACOM_MO)
-					wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
-				else
-					wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
 				break;
+			}
 		}
 		x = wacom_le16_to_cpu(&data[2]);
 		y = wacom_le16_to_cpu(&data[4]);
@@ -208,36 +198,32 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
 			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
 			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
-		}
-		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
-		wacom_report_key(wcombo, wacom->tool[0], 1);
-	} else if (wacom->id[0]) {
-		wacom_report_abs(wcombo, ABS_X, 0);
-		wacom_report_abs(wcombo, ABS_Y, 0);
-		if (wacom->tool[0] == BTN_TOOL_MOUSE) {
-			wacom_report_key(wcombo, BTN_LEFT, 0);
-			wacom_report_key(wcombo, BTN_RIGHT, 0);
-			wacom_report_abs(wcombo, ABS_DISTANCE, 0);
 		} else {
-			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_key(wcombo, BTN_TOUCH, 0);
-			wacom_report_key(wcombo, BTN_STYLUS, 0);
-			wacom_report_key(wcombo, BTN_STYLUS2, 0);
+			wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
+			wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
+			if (features->type == WACOM_G4 ||
+					features->type == WACOM_MO) {
+				wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
+				rw = (signed)(data[7] & 0x04) - (data[7] & 0x03);
+			} else {
+				wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
+				rw = -(signed)data[6];
+			}
+			wacom_report_rel(wcombo, REL_WHEEL, rw);
 		}
-		wacom->id[0] = 0;
-		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
-		wacom_report_key(wcombo, wacom->tool[0], 0);
+
+		if (!prox)
+			wacom->id[0] = 0;
+		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
+		wacom_report_key(wcombo, wacom->tool[0], prox);
+		wacom_input_sync(wcombo); /* sync last event */
 	}
 
 	/* send pad data */
 	switch (features->type) {
 	    case WACOM_G4:
-		if (data[7] & 0xf8) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
+		prox = data[7] & 0xf8;
+		if (prox || wacom->id[1]) {
 			wacom->id[1] = PAD_DEVICE_ID;
 			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
 			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
@@ -245,29 +231,16 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_rel(wcombo, REL_WHEEL, rw);
 			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
 			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-		} else if (wacom->id[1]) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
-			wacom->id[1] = 0;
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
-			wacom_report_rel(wcombo, REL_WHEEL, 0);
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
-			wacom_report_abs(wcombo, ABS_MISC, 0);
+			if (!prox)
+				wacom->id[1] = 0;
+			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
 			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
 		}
+		retval = 1;
 		break;
 	    case WACOM_MO:
-		if ((data[7] & 0xf8) || (data[8] & 0xff)) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
+		prox = (data[7] & 0xf8) || data[8];
+		if (prox || wacom->id[1]) {
 			wacom->id[1] = PAD_DEVICE_ID;
 			wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
 			wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
@@ -275,27 +248,16 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
 			wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
 			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
+			if (!prox)
+				wacom->id[1] = 0;
 			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
 			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-		} else if (wacom->id[1]) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
-			wacom->id[1] = 0;
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
-			wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
-			wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
-			wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
-			wacom_report_abs(wcombo, ABS_MISC, 0);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
 		}
+		retval = 1;
 		break;
 	}
-	return 1;
+exit:
+	return retval;
 }
 
 static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
@@ -636,9 +598,9 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 static void wacom_tpc_finger_in(struct wacom_wac *wacom, void *wcombo, char *data, int idx)
 {
 	wacom_report_abs(wcombo, ABS_X,
-		(data[2 + idx * 2] & 0xff) | ((data[3 + idx * 2] & 0x7f) << 8));
+		data[2 + idx * 2] | ((data[3 + idx * 2] & 0x7f) << 8));
 	wacom_report_abs(wcombo, ABS_Y,
-		(data[6 + idx * 2] & 0xff) | ((data[7 + idx * 2] & 0x7f) << 8));
+		data[6 + idx * 2] | ((data[7 + idx * 2] & 0x7f) << 8));
 	wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
 	wacom_report_key(wcombo, wacom->tool[idx], 1);
 	if (idx)
@@ -782,31 +744,24 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
 
 		touchInProx = 0;
 
-		if (prox) { /* in prox */
-			if (!wacom->id[0]) {
-				/* Going into proximity select tool */
-				wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-				if (wacom->tool[0] == BTN_TOOL_PEN)
-					wacom->id[0] = STYLUS_DEVICE_ID;
-				else
-					wacom->id[0] = ERASER_DEVICE_ID;
-			}
-			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
-			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
-			wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
-			wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
-			pressure = ((data[7] & 0x01) << 8) | data[6];
-			if (pressure < 0)
-				pressure = features->pressure_max + pressure + 1;
-			wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
-			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05);
-		} else {
-			wacom_report_abs(wcombo, ABS_X, 0);
-			wacom_report_abs(wcombo, ABS_Y, 0);
-			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_key(wcombo, BTN_STYLUS, 0);
-			wacom_report_key(wcombo, BTN_STYLUS2, 0);
-			wacom_report_key(wcombo, BTN_TOUCH, 0);
+		if (!wacom->id[0]) { /* first in prox */
+			/* Going into proximity select tool */
+			wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+			if (wacom->tool[0] == BTN_TOOL_PEN)
+				wacom->id[0] = STYLUS_DEVICE_ID;
+			else
+				wacom->id[0] = ERASER_DEVICE_ID;
+		}
+		wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+		wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+		wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+		wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+		pressure = ((data[7] & 0x01) << 8) | data[6];
+		if (pressure < 0)
+			pressure = features->pressure_max + pressure + 1;
+		wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05);
+		if (!prox) { /* out-prox */
 			wacom->id[0] = 0;
 			/* pen is out so touch can be enabled now */
 			touchInProx = 1;
@@ -1028,7 +983,7 @@ static const struct wacom_features wacom_features_0x93 =
 static const struct wacom_features wacom_features_0x9A =
 	{ "Wacom ISDv4 9A",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
 static const struct wacom_features wacom_features_0x9F =
-	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_PENABLED,  26202, 16325,  255,  0, TABLETPC };
+	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
 static const struct wacom_features wacom_features_0xE2 =
 	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG };
 static const struct wacom_features wacom_features_0xE3 =
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 8590b1e8ec37..b50cf04e61a8 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -17,7 +17,6 @@
 #define WACOM_PKGLEN_GRAPHIRE	 8
 #define WACOM_PKGLEN_BBFUN	 9
 #define WACOM_PKGLEN_INTUOS	10
-#define WACOM_PKGLEN_PENABLED	 8
 #define WACOM_PKGLEN_TPC1FG	 5
 #define WACOM_PKGLEN_TPC2FG	14
 
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 7208654a94ae..8a8fa4d2d6a8 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -24,17 +24,18 @@ config TOUCHSCREEN_88PM860X
 	  module will be called 88pm860x-ts.
 
 config TOUCHSCREEN_ADS7846
-	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
+	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
 	depends on SPI_MASTER
 	depends on HWMON = n || HWMON
 	help
 	  Say Y here if you have a touchscreen interface using the
-	  ADS7846/TSC2046 or ADS7843 controller, and your board-specific
-	  setup code includes that in its table of SPI devices.
+	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
+	  and your board-specific setup code includes that in its
+	  table of SPI devices.
 
 	  If HWMON is selected, and the driver is told the reference voltage
 	  on your board, you will also get hwmon interfaces for the voltage
-	  (and on ads7846/tsc2046, temperature) sensors of this chip.
+	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
 
 	  If unsure, say N (but it's safe to say "Y").
 
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index eb83939c705e..e019d53d1ab4 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -46,7 +46,7 @@
 #include <linux/spi/ad7877.h>
 #include <asm/irq.h>
 
-#define	TS_PEN_UP_TIMEOUT	msecs_to_jiffies(50)
+#define	TS_PEN_UP_TIMEOUT	msecs_to_jiffies(100)
 
 #define MAX_SPI_FREQ_HZ			20000000
 #define	MAX_12BIT			((1<<12)-1)
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 8b05d8e97543..532279cda0e4 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -36,6 +36,7 @@
  * TSC2046 is just newer ads7846 silicon.
  * Support for ads7843 tested on Atmel at91sam926x-EK.
  * Support for ads7845 has only been stubbed in.
+ * Support for Analog Devices AD7873 and AD7843 tested.
  *
  * IRQ handling needs a workaround because of a shortcoming in handling
  * edge triggered IRQs on some platforms like the OMAP1/2. These
@@ -821,6 +822,9 @@ static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
 
 	spin_unlock_irq(&ts->lock);
 
+	if (device_may_wakeup(&ts->spi->dev))
+		enable_irq_wake(ts->spi->irq);
+
 	return 0;
 
 }
@@ -829,6 +833,9 @@ static int ads7846_resume(struct spi_device *spi)
 {
 	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
+	if (device_may_wakeup(&ts->spi->dev))
+		disable_irq_wake(ts->spi->irq);
+
 	spin_lock_irq(&ts->lock);
 
 	ts->is_suspended = 0;
@@ -984,6 +991,15 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	vref = pdata->keep_vref_on;
 
+	if (ts->model == 7873) {
+		/* The AD7873 is almost identical to the ADS7846
+		 * keep VREF off during differential/ratiometric
+		 * conversion modes
+		 */
+		ts->model = 7846;
+		vref = 0;
+	}
+
 	/* set up the transfers to read touchscreen state; this assumes we
 	 * use formula #2 for pressure, not #3.
 	 */
@@ -1191,6 +1207,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	if (err)
 		goto err_remove_attr_group;
 
+	device_init_wakeup(&spi->dev, pdata->wakeup);
+
 	return 0;
 
  err_remove_attr_group:
@@ -1220,6 +1238,8 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 {
 	struct ads7846		*ts = dev_get_drvdata(&spi->dev);
 
+	device_init_wakeup(&spi->dev, false);
+
 	ads784x_hwmon_unregister(spi, ts);
 	input_unregister_device(ts->input);
 
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
index 09095c747110..f0bc6fa95809 100644
--- a/drivers/isdn/hardware/mISDN/mISDNisar.c
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -1712,13 +1712,13 @@ mISDNisar_init(struct isar_hw *isar, void *hw)
 }
 EXPORT_SYMBOL(mISDNisar_init);
 
-static int isar_mod_init(void)
+static int __init isar_mod_init(void)
 {
 	pr_notice("mISDN: ISAR driver Rev. %s\n", ISAR_REV);
 	return 0;
 }
 
-static void isar_mod_cleanup(void)
+static void __exit isar_mod_cleanup(void)
 {
 	pr_notice("mISDN: ISAR module unloaded\n");
 }
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index adb1e8c36b46..00c60e2e0ff7 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -1347,7 +1347,7 @@ isdn_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg)
 /*
  * isdn net devices manage lots of configuration variables as linked lists.
  * Those lists must only be manipulated from user space. Some of the ioctl's
- * service routines access user space and are not atomic. Therefor, ioctl's
+ * service routines access user space and are not atomic. Therefore, ioctl's
  * manipulating the lists and ioctl's sleeping while accessing the lists
  * are serialized by means of a semaphore.
  */
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 43ff4d3b046e..6eac588e0a37 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -1114,7 +1114,7 @@ static struct Bprotocol DSP = {
 	.create = dspcreate
 };
 
-static int dsp_init(void)
+static int __init dsp_init(void)
 {
 	int err;
 	int tics;
@@ -1212,7 +1212,7 @@ static int dsp_init(void)
 }
 
 
-static void dsp_cleanup(void)
+static void __exit dsp_cleanup(void)
 {
 	mISDN_unregister_Bprotocol(&DSP);
 
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index f1e8af54dff0..325b1ad7d4b8 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -477,7 +477,7 @@ l1oip_socket_parse(struct l1oip *hc, struct sockaddr_in *sin, u8 *buf, int len)
 		printk(KERN_DEBUG "%s: received frame, parsing... (%d)\n",
 			__func__, len);
 
-	/* check lenght */
+	/* check length */
 	if (len < 1+1+2) {
 		printk(KERN_WARNING "%s: packet error - length %d below "
 			"4 bytes\n", __func__, len);
@@ -1509,7 +1509,7 @@ l1oip_init(void)
 			printk(KERN_DEBUG "%s: interface %d is %s with %s.\n",
 			    __func__, l1oip_cnt, pri ? "PRI" : "BRI",
 			    bundle ? "bundled IP packet for all B-channels" :
-			    "seperate IP packets for every B-channel");
+			    "separate IP packets for every B-channel");
 
 		hc = kzalloc(sizeof(struct l1oip), GFP_ATOMIC);
 		if (!hc) {
diff --git a/drivers/isdn/sc/hardware.h b/drivers/isdn/sc/hardware.h
index 9e6d5302bf8e..627324856ead 100644
--- a/drivers/isdn/sc/hardware.h
+++ b/drivers/isdn/sc/hardware.h
@@ -87,7 +87,7 @@
 #define BRI_CHANNELS	2		/* Number of B channels */
 #define BRI_BASEPG_VAL	0x98
 #define BRI_MAGIC	0x60000		/* Magic Number */
-#define BRI_MEMSIZE	0x10000		/* Ammount of RAM (64K) */
+#define BRI_MEMSIZE	0x10000		/* Amount of RAM (64K) */
 #define BRI_PARTNO	"72-029"
 #define BRI_FEATURES	ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
 /*
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 5738d8bf2d97..921373e4e3af 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -948,10 +948,16 @@ static void do_monitor_cpu_combined(void)
 		printk(KERN_WARNING "Warning ! Temperature way above maximum (%d) !\n",
 		       temp_combi >> 16);
 		state0->overtemp += CPU_MAX_OVERTEMP / 4;
-	} else if (temp_combi > (state0->mpu.tmax << 16))
+	} else if (temp_combi > (state0->mpu.tmax << 16)) {
 		state0->overtemp++;
-	else
+		printk(KERN_WARNING "Temperature %d above max %d. overtemp %d\n",
+		       temp_combi >> 16, state0->mpu.tmax, state0->overtemp);
+	} else {
+		if (state0->overtemp)
+			printk(KERN_WARNING "Temperature back down to %d\n",
+			       temp_combi >> 16);
 		state0->overtemp = 0;
+	}
 	if (state0->overtemp >= CPU_MAX_OVERTEMP)
 		critical_state = 1;
 	if (state0->overtemp > 0) {
@@ -1023,10 +1029,16 @@ static void do_monitor_cpu_split(struct cpu_pid_state *state)
 		       " (%d) !\n",
 		       state->index, temp >> 16);
 		state->overtemp += CPU_MAX_OVERTEMP / 4;
-	} else if (temp > (state->mpu.tmax << 16))
+	} else if (temp > (state->mpu.tmax << 16)) {
 		state->overtemp++;
-	else
+		printk(KERN_WARNING "CPU %d temperature %d above max %d. overtemp %d\n",
+		       state->index, temp >> 16, state->mpu.tmax, state->overtemp);
+	} else {
+		if (state->overtemp)
+			printk(KERN_WARNING "CPU %d temperature back down to %d\n",
+			       state->index, temp >> 16);
 		state->overtemp = 0;
+	}
 	if (state->overtemp >= CPU_MAX_OVERTEMP)
 		critical_state = 1;
 	if (state->overtemp > 0) {
@@ -1085,10 +1097,16 @@ static void do_monitor_cpu_rack(struct cpu_pid_state *state)
 		       " (%d) !\n",
 		       state->index, temp >> 16);
 		state->overtemp = CPU_MAX_OVERTEMP / 4;
-	} else if (temp > (state->mpu.tmax << 16))
+	} else if (temp > (state->mpu.tmax << 16)) {
 		state->overtemp++;
-	else
+		printk(KERN_WARNING "CPU %d temperature %d above max %d. overtemp %d\n",
+		       state->index, temp >> 16, state->mpu.tmax, state->overtemp);
+	} else {
+		if (state->overtemp)
+			printk(KERN_WARNING "CPU %d temperature back down to %d\n",
+			       state->index, temp >> 16);
 		state->overtemp = 0;
+	}
 	if (state->overtemp >= CPU_MAX_OVERTEMP)
 		critical_state = 1;
 	if (state->overtemp > 0) {
diff --git a/drivers/macintosh/therm_pm72.h b/drivers/macintosh/therm_pm72.h
index 393cc9df94e1..df3680e2a22f 100644
--- a/drivers/macintosh/therm_pm72.h
+++ b/drivers/macintosh/therm_pm72.h
@@ -269,7 +269,7 @@ struct slots_pid_state
 #define CPU_TEMP_HISTORY_SIZE		2
 #define CPU_POWER_HISTORY_SIZE		10
 #define CPU_PID_INTERVAL		1
-#define CPU_MAX_OVERTEMP		30
+#define CPU_MAX_OVERTEMP		90
 
 #define CPUA_PUMP_RPM_INDEX		7
 #define CPUB_PUMP_RPM_INDEX		8
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 437f55c5d18d..419795f4a2aa 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -321,6 +321,7 @@ int wf_register_sensor(struct wf_sensor *new_sr)
 	kref_init(&new_sr->ref);
 	list_add(&new_sr->link, &wf_sensors);
 
+	sysfs_attr_init(&new_sr->attr.attr);
 	new_sr->attr.attr.name = new_sr->name;
 	new_sr->attr.attr.mode = 0444;
 	new_sr->attr.show = wf_show_sensor;
diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c
index 6c68b9e5f5c4..43137b421f92 100644
--- a/drivers/macintosh/windfarm_smu_controls.c
+++ b/drivers/macintosh/windfarm_smu_controls.c
@@ -173,6 +173,7 @@ static struct smu_fan_control *smu_fan_create(struct device_node *node,
 
 	fct->fan_type = pwm_fan;
 	fct->ctrl.type = pwm_fan ? WF_CONTROL_PWM_FAN : WF_CONTROL_RPM_FAN;
+	sysfs_attr_init(&fct->ctrl.attr.attr);
 
 	/* We use the name & location here the same way we do for SMU sensors,
 	 * see the comment in windfarm_smu_sensors.c. The locations are a bit
diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c
index f91b40942e07..84d2b91e4efb 100644
--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -75,7 +75,7 @@ static struct attribute *dm_attrs[] = {
 	NULL,
 };
 
-static struct sysfs_ops dm_sysfs_ops = {
+static const struct sysfs_ops dm_sysfs_ops = {
 	.show	= dm_attr_show,
 };
 
diff --git a/drivers/md/md.c b/drivers/md/md.c
index a20a71e5efd3..fdc1890b6ac5 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2642,7 +2642,7 @@ static void rdev_free(struct kobject *ko)
 	mdk_rdev_t *rdev = container_of(ko, mdk_rdev_t, kobj);
 	kfree(rdev);
 }
-static struct sysfs_ops rdev_sysfs_ops = {
+static const struct sysfs_ops rdev_sysfs_ops = {
 	.show		= rdev_attr_show,
 	.store		= rdev_attr_store,
 };
@@ -4059,7 +4059,7 @@ static void md_free(struct kobject *ko)
 	kfree(mddev);
 }
 
-static struct sysfs_ops md_sysfs_ops = {
+static const struct sysfs_ops md_sysfs_ops = {
 	.show	= md_attr_show,
 	.store	= md_attr_store,
 };
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 0903f539bf68..0a3b4ed38e48 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -123,7 +123,7 @@ static int ir_copy_table(struct ir_scancode_table *destin,
  * If the key is not found, returns -EINVAL, otherwise, returns 0.
  */
 static int ir_getkeycode(struct input_dev *dev,
-			 int scancode, int *keycode)
+			 unsigned int scancode, unsigned int *keycode)
 {
 	int elem;
 	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
@@ -291,7 +291,7 @@ static int ir_insert_key(struct ir_scancode_table *rc_tab,
  * If the key is not found, returns -EINVAL, otherwise, returns 0.
  */
 static int ir_setkeycode(struct input_dev *dev,
-			 int scancode, int keycode)
+			 unsigned int scancode, unsigned int keycode)
 {
 	int rc = 0;
 	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 52e4ce4304ee..80dda308ff74 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -214,14 +214,14 @@ struct dvb_tuner_ops {
 	int (*get_status)(struct dvb_frontend *fe, u32 *status);
 	int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength);
 
-	/** These are provided seperately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter seperately. */
+	/** These are provided separately from set_params in order to facilitate silicon
+	 * tuners which require sophisticated tuning loops, controlling each parameter separately. */
 	int (*set_frequency)(struct dvb_frontend *fe, u32 frequency);
 	int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
 
 	/*
-	 * These are provided seperately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter seperately.
+	 * These are provided separately from set_params in order to facilitate silicon
+	 * tuners which require sophisticated tuning loops, controlling each parameter separately.
 	 */
 	int (*set_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
 	int (*get_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index a03ef7efec9a..852fe89539cf 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -9,7 +9,7 @@
 #include <linux/usb/input.h>
 
 static int dvb_usb_getkeycode(struct input_dev *dev,
-				    int scancode, int *keycode)
+				unsigned int scancode, unsigned int *keycode)
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
@@ -39,7 +39,7 @@ static int dvb_usb_getkeycode(struct input_dev *dev,
 }
 
 static int dvb_usb_setkeycode(struct input_dev *dev,
-				    int scancode, int keycode)
+				unsigned int scancode, unsigned int keycode)
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 12279f6d9bc4..716870ae85d5 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4404,7 +4404,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input)
 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
  *
  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
- * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
+ * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
  * chips, ten eight input analog multiplexors, a not chip and a few
  * other components.
  *
@@ -4426,7 +4426,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input)
  *
  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
  * determined what function (if any) it provides.  With the microcontroller
- * and sync seperator chips a guess is that it might have to do with video
+ * and sync separator chips a guess is that it might have to do with video
  * switching and maybe some digital I/O.
  */
 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index bc4ced6c013b..f36e11a0458d 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -512,7 +512,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 /*
  * The FX2 chip does not give us a zero length read at end of frame.
  * It does, however, give a short read at the end of a frame, if
- * neccessary, rather than run two frames together.
+ * necessary, rather than run two frames together.
  *
  * By choosing the right bulk transfer size, we are guaranteed to always
  * get a short read for the last read of each frame.  Frame sizes are
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c
index 7400eacb4d64..142c327afb32 100644
--- a/drivers/media/video/omap24xxcam.c
+++ b/drivers/media/video/omap24xxcam.c
@@ -1735,7 +1735,7 @@ static struct v4l2_int_device omap24xxcam = {
  *
  */
 
-static int __init omap24xxcam_probe(struct platform_device *pdev)
+static int __devinit omap24xxcam_probe(struct platform_device *pdev)
 {
 	struct omap24xxcam_device *cam;
 	struct resource *mem;
diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt
index f9f3584281d8..d38dd791511e 100644
--- a/drivers/media/video/pwc/philips.txt
+++ b/drivers/media/video/pwc/philips.txt
@@ -33,7 +33,7 @@ a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin
 contains decompression routines that allow you to use higher image sizes and
 framerates; in addition the webcam uses less bandwidth on the USB bus (handy
 if you want to run more than 1 camera simultaneously). These routines fall
-under a NDA, and may therefor not be distributed as source; however, its use
+under a NDA, and may therefore not be distributed as source; however, its use
 is completely optional.
 
 You can build this code either into your kernel, or as a module. I recommend
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
index 4af7382da5c5..494957b10bac 100644
--- a/drivers/media/video/sn9c102/sn9c102_sensor.h
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -120,7 +120,7 @@ extern int sn9c102_write_regs(struct sn9c102_device*, const u8 valreg[][2],
 /*
    Write multiple registers with constant values. For example:
    sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17}, {0x0f, 0x18});
-   Register adresses must be < 256.
+   Register addresses must be < 256.
 */
 #define sn9c102_write_const_regs(sn9c102_device, data...)                     \
 	({ static const u8 _valreg[][2] = {data};                             \
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index 0446524d3543..6bf6bc7dbc7f 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -6,7 +6,7 @@
 
     The tea6420 is a bus controlled audio-matrix with 5 stereo inputs,
     4 stereo outputs and gain control for each output.
-    It is cascadable, i.e. it can be found at the adresses 0x98
+    It is cascadable, i.e. it can be found at the addresses 0x98
     and 0x9a on the i2c-bus.
 
     For detailed informations download the specifications directly
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index e5ab62141503..ef5ce2676f05 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -539,7 +539,7 @@ static int i2o_iop_reset(struct i2o_controller *c)
 		 * which is indeterminate. We need to wait until the IOP has
 		 * rebooted before we can let the system talk to it. We read
 		 * the inbound Free_List until a message is available. If we
-		 * can't read one in the given ammount of time, we assume the
+		 * can't read one in the given amount of time, we assume the
 		 * IOP could not reboot properly.
 		 */
 		osm_debug("%s: Reset in progress, waiting for reboot...\n",
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 951fa9b93fbe..2a5a0b78f84e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -11,7 +11,7 @@ config MFD_CORE
 
 config MFD_88PM860X
 	bool "Support Marvell 88PM8606/88PM8607"
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
 	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
@@ -205,7 +205,7 @@ config PMIC_ADP5520
 
 config MFD_MAX8925
 	bool "Maxim Semiconductor MAX8925 PMIC Support"
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
 	  Say yes here to support for Maxim Semiconductor MAX8925. This is
@@ -226,7 +226,7 @@ config MFD_WM8400
 config MFD_WM831X
 	bool "Support Wolfson Microelectronics WM831x/2x PMICs"
 	select MFD_CORE
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
 	  This driver provides common support for accessing the device,
@@ -235,6 +235,7 @@ config MFD_WM831X
 
 config MFD_WM8350
 	bool
+	depends on GENERIC_HARDIRQS
 
 config MFD_WM8350_CONFIG_MODE_0
 	bool
@@ -287,7 +288,7 @@ config MFD_WM8352_CONFIG_MODE_3
 config MFD_WM8350_I2C
 	bool "Support Wolfson Microelectronics WM8350 with I2C"
 	select MFD_WM8350
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  The WM8350 is an integrated audio and power management
 	  subsystem with watchdog and RTC functionality for embedded
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index dc9ea95c0561..7b6652f60117 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -523,7 +523,7 @@ unsigned long sm501_set_clock(struct device *dev,
 	unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
 	unsigned char reg;
 	unsigned int pll_reg = 0;
-	unsigned long sm501_freq; /* the actual frequency acheived */
+	unsigned long sm501_freq; /* the actual frequency achieved */
 
 	struct sm501_clock to;
 
@@ -533,7 +533,7 @@ unsigned long sm501_set_clock(struct device *dev,
 
 	switch (clksrc) {
 	case SM501_CLOCK_P2XCLK:
-		/* This clock is divided in half so to achive the
+		/* This clock is divided in half so to achieve the
 		 * requested frequency the value must be multiplied by
 		 * 2. This clock also has an additional pre divisor */
 
@@ -562,7 +562,7 @@ unsigned long sm501_set_clock(struct device *dev,
 		break;
 
 	case SM501_CLOCK_V2XCLK:
-		/* This clock is divided in half so to achive the
+		/* This clock is divided in half so to achieve the
 		 * requested frequency the value must be multiplied by 2. */
 
 		sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
@@ -648,7 +648,7 @@ unsigned long sm501_find_clock(struct device *dev,
 			       unsigned long req_freq)
 {
 	struct sm501_devdata *sm = dev_get_drvdata(dev);
-	unsigned long sm501_freq; /* the frequency achiveable by the 501 */
+	unsigned long sm501_freq; /* the frequency achieveable by the 501 */
 	struct sm501_clock to;
 
 	switch (clksrc) {
@@ -1430,7 +1430,7 @@ static int __devinit sm501_plat_probe(struct platform_device *dev)
 	}
 
 	sm->regs_claim = request_mem_region(sm->io_res->start,
-					    resource_size(sm->io_res), "sm501");
+					    0x100, "sm501");
 
 	if (sm->regs_claim == NULL) {
 		dev_err(&dev->dev, "cannot claim registers\n");
@@ -1644,7 +1644,7 @@ static int __devinit sm501_pci_probe(struct pci_dev *dev,
 	sm->mem_res = &dev->resource[0];
 
 	sm->regs_claim = request_mem_region(sm->io_res->start,
-					    resource_size(sm->io_res), "sm501");
+					    0x100, "sm501");
 	if (sm->regs_claim == NULL) {
 		dev_err(&dev->dev, "cannot claim registers\n");
 		err= -EBUSY;
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d16af6a423fb..2191c8d896a0 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -268,6 +268,16 @@ config ISL29003
 	  This driver can also be built as a module.  If so, the module
 	  will be called isl29003.
 
+config SENSORS_TSL2550
+	tristate "Taos TSL2550 ambient light sensor"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get support for the Taos TSL2550
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tsl2550.
+
 config EP93XX_PWM
 	tristate "EP93xx PWM support"
 	depends on ARCH_EP93XX
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 049ff2482f30..27c484355414 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_CS5535_MFGPT)	+= cs5535-mfgpt.o
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
+obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
 obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 2cb2736d65aa..db7d0f21b65d 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -505,6 +505,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	 * Export the EEPROM bytes through sysfs, since that's convenient.
 	 * By default, only root should see the data (maybe passwords etc)
 	 */
+	sysfs_bin_attr_init(&at24->bin);
 	at24->bin.attr.name = "eeprom";
 	at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
 	at24->bin.read = at24_bin_read;
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index d902d81dde39..d194212a41f6 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -347,6 +347,7 @@ static int at25_probe(struct spi_device *spi)
 	 * that's sensitive for read and/or write, like ethernet addresses,
 	 * security codes, board-specific manufacturing calibrations, etc.
 	 */
+	sysfs_bin_attr_init(&at25->bin);
 	at25->bin.attr.name = "eeprom";
 	at25->bin.attr.mode = S_IRUSR;
 	at25->bin.read = at25_bin_read;
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 04c27266f567..779aa8ebe4cf 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -497,12 +497,7 @@ static struct pci_driver phantom_pci_driver = {
 	.resume = phantom_resume
 };
 
-static ssize_t phantom_show_version(struct class *cls, char *buf)
-{
-	return sprintf(buf, PHANTOM_VERSION "\n");
-}
-
-static CLASS_ATTR(version, 0444, phantom_show_version, NULL);
+static CLASS_ATTR_STRING(version, 0444, PHANTOM_VERSION);
 
 static int __init phantom_init(void)
 {
@@ -515,7 +510,7 @@ static int __init phantom_init(void)
 		printk(KERN_ERR "phantom: can't register phantom class\n");
 		goto err;
 	}
-	retval = class_create_file(phantom_class, &class_attr_version);
+	retval = class_create_file(phantom_class, &class_attr_version.attr);
 	if (retval) {
 		printk(KERN_ERR "phantom: can't create sysfs version file\n");
 		goto err_class;
@@ -541,7 +536,7 @@ static int __init phantom_init(void)
 err_unchr:
 	unregister_chrdev_region(dev, PHANTOM_MAX_MINORS);
 err_attr:
-	class_remove_file(phantom_class, &class_attr_version);
+	class_remove_file(phantom_class, &class_attr_version.attr);
 err_class:
 	class_destroy(phantom_class);
 err:
@@ -554,7 +549,7 @@ static void __exit phantom_exit(void)
 
 	unregister_chrdev_region(MKDEV(phantom_major, 0), PHANTOM_MAX_MINORS);
 
-	class_remove_file(phantom_class, &class_attr_version);
+	class_remove_file(phantom_class, &class_attr_version.attr);
 	class_destroy(phantom_class);
 
 	pr_debug("phantom: module successfully removed\n");
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index 02a77b8b8eef..7a8b9068ea03 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -516,8 +516,7 @@ struct gru_blade_state {
 
 /* Scan all active GRUs in a GRU bitmap */
 #define for_each_gru_in_bitmap(gid, map)				\
-	for ((gid) = find_first_bit((map), GRU_MAX_GRUS); (gid) < GRU_MAX_GRUS;\
-		(gid)++, (gid) = find_next_bit((map), GRU_MAX_GRUS, (gid)))
+	for_each_set_bit((gid), (map), GRU_MAX_GRUS)
 
 /* Scan all active GRUs on a specific blade */
 #define for_each_gru_on_blade(gru, nid, i)				\
@@ -536,23 +535,17 @@ struct gru_blade_state {
 
 /* Scan each CBR whose bit is set in a TFM (or copy of) */
 #define for_each_cbr_in_tfm(i, map)					\
-	for ((i) = find_first_bit(map, GRU_NUM_CBE);			\
-			(i) < GRU_NUM_CBE;				\
-			(i)++, (i) = find_next_bit(map, GRU_NUM_CBE, i))
+	for_each_set_bit((i), (map), GRU_NUM_CBE)
 
 /* Scan each CBR in a CBR bitmap. Note: multiple CBRs in an allocation unit */
 #define for_each_cbr_in_allocation_map(i, map, k)			\
-	for ((k) = find_first_bit(map, GRU_CBR_AU); (k) < GRU_CBR_AU;	\
-			(k) = find_next_bit(map, GRU_CBR_AU, (k) + 1)) 	\
+	for_each_set_bit((k), (map), GRU_CBR_AU)			\
 		for ((i) = (k)*GRU_CBR_AU_SIZE;				\
 				(i) < ((k) + 1) * GRU_CBR_AU_SIZE; (i)++)
 
 /* Scan each DSR in a DSR bitmap. Note: multiple DSRs in an allocation unit */
 #define for_each_dsr_in_allocation_map(i, map, k)			\
-	for ((k) = find_first_bit((const unsigned long *)map, GRU_DSR_AU);\
-			(k) < GRU_DSR_AU;				\
-			(k) = find_next_bit((const unsigned long *)map,	\
-					  GRU_DSR_AU, (k) + 1))		\
+	for_each_set_bit((k), (const unsigned long *)(map), GRU_DSR_AU)	\
 		for ((i) = (k) * GRU_DSR_AU_CL;				\
 				(i) < ((k) + 1) * GRU_DSR_AU_CL; (i)++)
 
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/misc/tsl2550.c
index a0702f36a72f..483ae5f7f68e 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/misc/tsl2550.c
@@ -47,8 +47,8 @@ struct tsl2550_data {
 	struct i2c_client *client;
 	struct mutex update_lock;
 
-	unsigned int power_state : 1;
-	unsigned int operating_mode : 1;
+	unsigned int power_state:1;
+	unsigned int operating_mode:1;
 };
 
 /*
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 3fab78ba8952..723e50894db9 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -575,7 +575,7 @@ static int uart_carrier_raised(struct tty_port *tport)
 	struct sdio_uart_port *port =
 			container_of(tport, struct sdio_uart_port, port);
 	unsigned int ret = sdio_uart_claim_func(port);
-	if (ret)	/* Missing hardware shoudn't block for carrier */
+	if (ret)	/* Missing hardware shouldn't block for carrier */
 		return 1;
 	ret = sdio_uart_get_mctrl(port);
 	sdio_uart_release_func(port);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f4b97d3c3d0f..3168ebd616b2 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1089,6 +1089,7 @@ void mmc_rescan(struct work_struct *work)
 	mmc_claim_host(host);
 
 	mmc_power_up(host);
+	sdio_reset(host);
 	mmc_go_idle(host);
 
 	mmc_send_if_cond(host, host->ocr_avail);
diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c
index 4eb7825fd1a7..dea36d9c22e6 100644
--- a/drivers/mmc/core/sdio_ops.c
+++ b/drivers/mmc/core/sdio_ops.c
@@ -67,13 +67,13 @@ int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 	return err;
 }
 
-int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
-	unsigned addr, u8 in, u8* out)
+static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn,
+	unsigned addr, u8 in, u8 *out)
 {
 	struct mmc_command cmd;
 	int err;
 
-	BUG_ON(!card);
+	BUG_ON(!host);
 	BUG_ON(fn > 7);
 
 	/* sanity check */
@@ -90,11 +90,11 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 	cmd.arg |= in;
 	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
 
-	err = mmc_wait_for_cmd(card->host, &cmd, 0);
+	err = mmc_wait_for_cmd(host, &cmd, 0);
 	if (err)
 		return err;
 
-	if (mmc_host_is_spi(card->host)) {
+	if (mmc_host_is_spi(host)) {
 		/* host driver already reported errors */
 	} else {
 		if (cmd.resp[0] & R5_ERROR)
@@ -106,7 +106,7 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 	}
 
 	if (out) {
-		if (mmc_host_is_spi(card->host))
+		if (mmc_host_is_spi(host))
 			*out = (cmd.resp[0] >> 8) & 0xFF;
 		else
 			*out = cmd.resp[0] & 0xFF;
@@ -115,6 +115,13 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 	return 0;
 }
 
+int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
+	unsigned addr, u8 in, u8 *out)
+{
+	BUG_ON(!card);
+	return mmc_io_rw_direct_host(card->host, write, fn, addr, in, out);
+}
+
 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
 {
@@ -182,3 +189,20 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 	return 0;
 }
 
+int sdio_reset(struct mmc_host *host)
+{
+	int ret;
+	u8 abort;
+
+	/* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */
+
+	ret = mmc_io_rw_direct_host(host, 0, 0, SDIO_CCCR_ABORT, 0, &abort);
+	if (ret)
+		abort = 0x08;
+	else
+		abort |= 0x08;
+
+	ret = mmc_io_rw_direct_host(host, 1, 0, SDIO_CCCR_ABORT, abort, NULL);
+	return ret;
+}
+
diff --git a/drivers/mmc/core/sdio_ops.h b/drivers/mmc/core/sdio_ops.h
index e2e74b0d17d8..12a4d3ab174c 100644
--- a/drivers/mmc/core/sdio_ops.h
+++ b/drivers/mmc/core/sdio_ops.h
@@ -17,6 +17,7 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 	unsigned addr, u8 in, u8* out);
 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);
+int sdio_reset(struct mmc_host *host);
 
 #endif
 
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index b31946e0b4ca..4c068e5fe6b2 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -1250,9 +1250,7 @@ msmsdcc_resume(struct platform_device *dev)
 
 		if (mmc->card && mmc->card->type != MMC_TYPE_SDIO)
 			mmc_resume_host(mmc);
-			if (host->stat_irq)
-				enable_irq(host->stat_irq);
-		else if (host->stat_irq)
+		if (host->stat_irq)
 			enable_irq(host->stat_irq);
 	}
 	return 0;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 60a2b69e54f5..2df90412abb5 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -4,7 +4,7 @@
  *  This is a driver for the SDHC controller found in Freescale MX2/MX3
  *  SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
  *  Unlike the hardware found on MX1, this hardware just works and does
- *  not need all the quirks found in imxmmc.c, hence the seperate driver.
+ *  not need all the quirks found in imxmmc.c, hence the separate driver.
  *
  *  Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
  *  Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
@@ -708,7 +708,7 @@ static int mxcmci_probe(struct platform_device *pdev)
 	mmc->max_blk_size = 2048;
 	mmc->max_blk_count = 65535;
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
-	mmc->max_seg_size = mmc->max_seg_size;
+	mmc->max_seg_size = mmc->max_req_size;
 
 	host = mmc_priv(mmc);
 	host->base = ioremap(r->start, resource_size(r));
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index ca584d0380b4..ca584d0380b4 100755..100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 1bec5e1ce6ac..8db1148dfa47 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -226,7 +226,7 @@ struct unlock_addr {
  * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore,
  * should not be used.  The  problem is that structures with
  * initializers have extra fields initialized to 0.  It is _very_
- * desireable to have the unlock address entries for unsupported
+ * desirable to have the unlock address entries for unsupported
  * data widths automatically initialized - that means that
  * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here
  * must go unused.
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index 8aca5523a337..8aca5523a337 100755..100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
index c48cad271f5d..30e12c88d1da 100644
--- a/drivers/mtd/maps/pismo.c
+++ b/drivers/mtd/maps/pismo.c
@@ -118,7 +118,7 @@ static int __devinit pismo_add_device(struct pismo_data *pismo, int i,
 {
 	struct platform_device *dev;
 	struct resource res = { };
-	phys_addr_t base = region.base;
+	phys_addr_t base = region->base;
 	int ret;
 
 	if (base == ~0)
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index dafb91944e70..76a76be5a7bd 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -4,7 +4,7 @@
  *	http://www.simtec.co.uk/products/SWLINUX/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Generic platfrom device based RAM map
+ * Generic platform device based RAM map
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index bb6465604235..1157d5679e66 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -444,7 +444,7 @@ config MTD_NAND_FSL_UPM
 
 config MTD_NAND_MXC
 	tristate "MXC NAND support"
-	depends on ARCH_MX2 || ARCH_MX3
+	depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
 	help
 	  This enables the driver for the NAND flash controller on the
 	  MXC processors.
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 087bcd745bb7..7d1cca7a31a9 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -381,7 +381,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
 	if (!r)
 		return -ENXIO;
 
-	/* map physical adress */
+	/* map physical address */
 	bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1);
 
 	if (!bcm_umi_io_base) {
@@ -525,7 +525,7 @@ static int bcm_umi_nand_remove(struct platform_device *pdev)
 	/* Release resources, unregister device */
 	nand_release(board_mtd);
 
-	/* unmap physical adress */
+	/* unmap physical address */
 	iounmap(bcm_umi_io_base);
 
 	/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 45dec5770da0..b2900d8406d3 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -507,7 +507,7 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
 		 * MXC NANDFC can only perform full page+spare or
 		 * spare-only read/write.  When the upper layers
 		 * layers perform a read/write buf operation,
-		 * we will used the saved column adress to index into
+		 * we will used the saved column address to index into
 		 * the full page.
 		 */
 		send_addr(host, 0, page_addr == -1);
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index bc45ef9af17d..fad40aa6f099 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -89,7 +89,8 @@ DEFINE_MUTEX(ubi_devices_mutex);
 static DEFINE_SPINLOCK(ubi_devices_lock);
 
 /* "Show" method for files in '/<sysfs>/class/ubi/' */
-static ssize_t ubi_version_show(struct class *class, char *buf)
+static ssize_t ubi_version_show(struct class *class, struct class_attribute *attr,
+				char *buf)
 {
 	return sprintf(buf, "%d\n", UBI_VERSION);
 }
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7029cd50c458..0ba5b8e50a7c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -907,7 +907,7 @@ config SMC91X
 	select CRC32
 	select MII
 	depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
-		MIPS || BLACKFIN || MN10300
+		MIPS || BLACKFIN || MN10300 || COLDFIRE
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 8ca639127dbc..a1d4188c430b 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -575,9 +575,9 @@ static int ks8695_poll(struct napi_struct *napi, int budget)
 	if (work_done < budget) {
 		unsigned long flags;
 		spin_lock_irqsave(&ksp->rx_lock, flags);
+		__napi_complete(napi);
 		/*enable rx interrupt*/
 		writel(isr | mask_bit, KS8695_IRQ_VA + KS8695_INTEN);
-		__napi_complete(napi);
 		spin_unlock_irqrestore(&ksp->rx_lock, flags);
 	}
 	return work_done;
diff --git a/drivers/net/atlx/atl2.h b/drivers/net/atlx/atl2.h
index d918bbe621ea..927e4de6474d 100644
--- a/drivers/net/atlx/atl2.h
+++ b/drivers/net/atlx/atl2.h
@@ -442,7 +442,7 @@ struct atl2_hw {
 struct atl2_ring_header {
     /* pointer to the descriptor ring memory */
     void *desc;
-    /* physical adress of the descriptor ring */
+    /* physical address of the descriptor ring */
     dma_addr_t dma;
     /* length of descriptor ring in bytes */
     unsigned int size;
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index be81fb2d10f7..8f0752553681 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -290,11 +290,6 @@ extern const struct ethtool_ops be_ethtool_ops;
 
 #define drvr_stats(adapter)		(&adapter->stats.drvr_stats)
 
-static inline unsigned int be_pci_func(struct be_adapter *adapter)
-{
-	return PCI_FUNC(adapter->pdev->devfn);
-}
-
 #define BE_SET_NETDEV_OPS(netdev, ops)	(netdev->netdev_ops = ops)
 
 #define PAGE_SHIFT_4K		12
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 4b1f80519ca4..c59215361f4e 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -465,8 +465,6 @@ int be_cmd_eq_create(struct be_adapter *adapter,
 
 	req->num_pages =  cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
 
-	AMAP_SET_BITS(struct amap_eq_context, func, req->context,
-			be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
 	/* 4byte eqe*/
 	AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
@@ -629,7 +627,6 @@ int be_cmd_cq_create(struct be_adapter *adapter,
 	AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
 	AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
 	AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
-	AMAP_SET_BITS(struct amap_cq_context, func, ctxt, be_pci_func(adapter));
 	be_dws_cpu_to_le(ctxt, sizeof(req->context));
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
@@ -678,7 +675,6 @@ int be_cmd_mccq_create(struct be_adapter *adapter,
 
 	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
 
-	AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt, be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1);
 	AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt,
 		be_encoded_q_len(mccq->len));
@@ -727,8 +723,6 @@ int be_cmd_txq_create(struct be_adapter *adapter,
 
 	AMAP_SET_BITS(struct amap_tx_context, tx_ring_size, ctxt,
 		be_encoded_q_len(txq->len));
-	AMAP_SET_BITS(struct amap_tx_context, pci_func_id, ctxt,
-			be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_tx_context, ctx_valid, ctxt, 1);
 	AMAP_SET_BITS(struct amap_tx_context, cq_id_send, ctxt, cq->id);
 
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index 5ffb149181ad..2d4a4b827637 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -114,8 +114,7 @@
 #define IMG_TYPE_ISCSI_BACKUP		9
 #define IMG_TYPE_FCOE_FW_ACTIVE		10
 #define IMG_TYPE_FCOE_FW_BACKUP 	11
-#define IMG_TYPE_NCSI_BITFILE		13
-#define IMG_TYPE_NCSI_8051		14
+#define IMG_TYPE_NCSI_FW		13
 
 #define FLASHROM_OPER_FLASH		1
 #define FLASHROM_OPER_SAVE		2
@@ -127,6 +126,7 @@
 #define FLASH_IMAGE_MAX_SIZE_g3            (2097152) /* Max fw image size */
 #define FLASH_BIOS_IMAGE_MAX_SIZE_g3       (524288)  /* Max OPTION ROM img sz */
 #define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3	  (1048576)  /* Max Redboot image sz */
+#define FLASH_NCSI_IMAGE_MAX_SIZE_g3       (262144)  /* Max NSCI image sz */
 
 #define FLASH_NCSI_MAGIC		(0x16032009)
 #define FLASH_NCSI_DISABLED		(0)
@@ -144,6 +144,7 @@
 #define FLASH_FCoE_BIOS_START_g2           (524288)
 #define FLASH_REDBOOT_START_g2		  (0)
 
+#define FLASH_NCSI_START_g3		   (15990784)
 #define FLASH_iSCSI_PRIMARY_IMAGE_START_g3 (2097152)
 #define FLASH_iSCSI_BACKUP_IMAGE_START_g3  (4194304)
 #define FLASH_FCoE_PRIMARY_IMAGE_START_g3  (6291456)
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index a703ed8e24fe..43e8032f9236 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1382,7 +1382,7 @@ rx_eq_free:
 /* There are 8 evt ids per func. Retruns the evt id's bit number */
 static inline int be_evt_bit_get(struct be_adapter *adapter, u32 eq_id)
 {
-	return eq_id - 8 * be_pci_func(adapter);
+	return eq_id % 8;
 }
 
 static irqreturn_t be_intx(int irq, void *dev)
@@ -1880,8 +1880,9 @@ static int be_flash_data(struct be_adapter *adapter,
 	const u8 *p = fw->data;
 	struct be_cmd_write_flashrom *req = flash_cmd->va;
 	struct flash_comp *pflashcomp;
+	int num_comp;
 
-	struct flash_comp gen3_flash_types[8] = {
+	struct flash_comp gen3_flash_types[9] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, IMG_TYPE_ISCSI_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_REDBOOT_START_g3, IMG_TYPE_REDBOOT,
@@ -1897,7 +1898,9 @@ static int be_flash_data(struct be_adapter *adapter,
 		{ FLASH_FCoE_PRIMARY_IMAGE_START_g3, IMG_TYPE_FCOE_FW_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_FCoE_BACKUP_IMAGE_START_g3, IMG_TYPE_FCOE_FW_BACKUP,
-			FLASH_IMAGE_MAX_SIZE_g3}
+			FLASH_IMAGE_MAX_SIZE_g3},
+		{ FLASH_NCSI_START_g3, IMG_TYPE_NCSI_FW,
+			FLASH_NCSI_IMAGE_MAX_SIZE_g3}
 	};
 	struct flash_comp gen2_flash_types[8] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g2, IMG_TYPE_ISCSI_ACTIVE,
@@ -1921,11 +1924,16 @@ static int be_flash_data(struct be_adapter *adapter,
 	if (adapter->generation == BE_GEN3) {
 		pflashcomp = gen3_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g3);
+		num_comp = 9;
 	} else {
 		pflashcomp = gen2_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g2);
+		num_comp = 8;
 	}
-	for (i = 0; i < 8; i++) {
+	for (i = 0; i < num_comp; i++) {
+		if ((pflashcomp[i].optype == IMG_TYPE_NCSI_FW) &&
+				memcmp(adapter->fw_ver, "3.102.148.0", 11) < 0)
+			continue;
 		if ((pflashcomp[i].optype == IMG_TYPE_REDBOOT) &&
 			(!be_flash_redboot(adapter, fw->data,
 			 pflashcomp[i].offset, pflashcomp[i].size,
@@ -1985,16 +1993,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 	struct be_dma_mem flash_cmd;
 	int status, i = 0;
 	const u8 *p;
-	char fw_ver[FW_VER_LEN];
-	char fw_cfg;
-
-	status = be_cmd_get_fw_ver(adapter, fw_ver);
-	if (status)
-		return status;
 
-	fw_cfg = *(fw_ver + 2);
-	if (fw_cfg == '0')
-		fw_cfg = '1';
 	strcpy(fw_file, func);
 
 	status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 5acd557cea9b..b8bec086daa1 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -51,7 +51,9 @@
  * "show" function for the bond_masters attribute.
  * The class parameter is ignored.
  */
-static ssize_t bonding_show_bonds(struct class *cls, char *buf)
+static ssize_t bonding_show_bonds(struct class *cls,
+				  struct class_attribute *attr,
+				  char *buf)
 {
 	struct net *net = current->nsproxy->net_ns;
 	struct bond_net *bn = net_generic(net, bond_net_id);
@@ -98,6 +100,7 @@ static struct net_device *bond_get_by_name(struct net *net, const char *ifname)
  */
 
 static ssize_t bonding_store_bonds(struct class *cls,
+				   struct class_attribute *attr,
 				   const char *buffer, size_t count)
 {
 	struct net *net = current->nsproxy->net_ns;
diff --git a/drivers/net/can/bfin_can.c b/drivers/net/can/bfin_can.c
index bf7f9ba2d903..866905fa4119 100644
--- a/drivers/net/can/bfin_can.c
+++ b/drivers/net/can/bfin_can.c
@@ -26,6 +26,7 @@
 
 #define DRV_NAME "bfin_can"
 #define BFIN_CAN_TIMEOUT 100
+#define TX_ECHO_SKB_MAX  1
 
 /*
  * transmit and receive channels
@@ -593,7 +594,7 @@ struct net_device *alloc_bfin_candev(void)
 	struct net_device *dev;
 	struct bfin_can_priv *priv;
 
-	dev = alloc_candev(sizeof(*priv));
+	dev = alloc_candev(sizeof(*priv), TX_ECHO_SKB_MAX);
 	if (!dev)
 		return NULL;
 
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index 11c87840cc00..33451092b8e8 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -876,9 +876,7 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 	return NETDEV_TX_OK;
 
 nomem:
-	if (skb)
-		dev_kfree_skb(skb);
-
+	dev_kfree_skb(skb);
 	stats->tx_dropped++;
 
 	return NETDEV_TX_OK;
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 7cbcfb0ade1c..9bd155e4111c 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -5072,7 +5072,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	INIT_WORK(&cp->reset_task, cas_reset_task);
 
 	/* Default link parameters */
-	if (link_mode >= 0 && link_mode <= 6)
+	if (link_mode >= 0 && link_mode < 6)
 		cp->link_cntl = link_modes[link_mode];
 	else
 		cp->link_cntl = BMCR_ANENABLE;
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 71384114a4ed..55d99ca82f8a 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -248,7 +248,7 @@ static void restart_sched(unsigned long);
  *
  * Interrupts are handled by a single CPU and it is likely that on a MP system
  * the application is migrated to another CPU. In that scenario, we try to
- * seperate the RX(in irq context) and TX state in order to decrease memory
+ * separate the RX(in irq context) and TX state in order to decrease memory
  * contention.
  */
 struct sge {
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index b85c81f60d10..60777fd90b33 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 
 #include <linux/netdevice.h>
+#include <linux/if_vlan.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/skbuff.h>
@@ -55,9 +56,9 @@ module_param(dumb_switch, int, 0444);
 MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable");
 MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
 
-#define CPMAC_VERSION "0.5.1"
-/* frame size + 802.1q tag */
-#define CPMAC_SKB_SIZE		(ETH_FRAME_LEN + 4)
+#define CPMAC_VERSION "0.5.2"
+/* frame size + 802.1q tag + FCS size */
+#define CPMAC_SKB_SIZE		(ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
 #define CPMAC_QUEUES	8
 
 /* Ethernet registers */
@@ -1136,8 +1137,9 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
 	}
 
 	if (phy_id == PHY_MAX_ADDR) {
-		dev_err(&pdev->dev, "no PHY present\n");
-		return -ENODEV;
+		dev_err(&pdev->dev, "no PHY present, falling back to switch on MDIO bus 0\n");
+		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+		phy_id = pdev->id;
 	}
 
 	dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
@@ -1290,8 +1292,8 @@ void __devexit cpmac_exit(void)
 {
 	platform_driver_unregister(&cpmac_driver);
 	mdiobus_unregister(cpmac_mii);
-	mdiobus_free(cpmac_mii);
 	iounmap(cpmac_mii->priv);
+	mdiobus_free(cpmac_mii);
 }
 
 module_init(cpmac_init);
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 14624019ce71..b0208e474f7e 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -580,7 +580,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 	}
 
 #ifdef CONFIG_SH_HICOSH4
-	/* truely reset the chip */
+	/* truly reset the chip */
 	writeword(ioaddr, ADD_PORT, 0x0114);
 	writeword(ioaddr, DATA_PORT, 0x0040);
 #endif
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 3e453e1d97e7..9e3e8750b46a 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1294,6 +1294,7 @@ static void cxgb_down(struct adapter *adapter)
 
 	free_irq_resources(adapter);
 	quiesce_rx(adapter);
+	t3_sge_stop(adapter);
 	flush_workqueue(cxgb3_wq);	/* wait for external IRQ handler */
 }
 
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 78e265b484b6..67e61b2a8c42 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -197,13 +197,13 @@ static inline void refill_rspq(struct adapter *adapter,
 /**
  *	need_skb_unmap - does the platform need unmapping of sk_buffs?
  *
- *	Returns true if the platfrom needs sk_buff unmapping.  The compiler
+ *	Returns true if the platform needs sk_buff unmapping.  The compiler
  *	optimizes away unecessary code if this returns true.
  */
 static inline int need_skb_unmap(void)
 {
 	/*
-	 * This structure is used to tell if the platfrom needs buffer
+	 * This structure is used to tell if the platform needs buffer
 	 * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything.
 	 */
 	struct dummy {
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 1ac9440eb3fb..8bd086aee56d 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -2385,7 +2385,7 @@ static int emac_dev_open(struct net_device *ndev)
 	struct emac_priv *priv = netdev_priv(ndev);
 
 	netif_carrier_off(ndev);
-	for (cnt = 0; cnt <= ETH_ALEN; cnt++)
+	for (cnt = 0; cnt < ETH_ALEN; cnt++)
 		ndev->dev_addr[cnt] = priv->mac_addr[cnt];
 
 	/* Configuration items */
@@ -2658,7 +2658,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 	if (!pdata) {
-		printk(KERN_ERR "DaVinci EMAC: No platfrom data\n");
+		printk(KERN_ERR "DaVinci EMAC: No platform data\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 3c95acb3a87d..712ccc66ba25 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1346,7 +1346,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
  *
  *  1) down
  *  2) autoneg_progress
- *  3) autoneg_complete (the link sucessfully autonegotiated)
+ *  3) autoneg_complete (the link successfully autonegotiated)
  *  4) forced_up (the link has been forced up, it did not autonegotiate)
  *
  **/
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index db05ec355749..e301e26d6897 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -320,6 +320,8 @@
 #define E1000_RXCSUM_IPPCSE    0x00001000   /* IP payload checksum enable */
 
 /* Header split receive */
+#define E1000_RFCTL_NFSW_DIS            0x00000040
+#define E1000_RFCTL_NFSR_DIS            0x00000080
 #define E1000_RFCTL_ACK_DIS             0x00001000
 #define E1000_RFCTL_EXTEN               0x00008000
 #define E1000_RFCTL_IPV6_EX_DIS         0x00010000
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 54d03a0ce3ce..8b5e157e9c87 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -2740,6 +2740,16 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
 		reg &= ~(1 << 31);
 		ew32(STATUS, reg);
 	}
+
+	/*
+	 * work-around descriptor data corruption issue during nfs v2 udp
+	 * traffic, just disable the nfs filtering capability
+	 */
+	reg = er32(RFCTL);
+	reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);
+	ew32(RFCTL, reg);
+
+	return;
 }
 
 /**
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 2425ed11d5cc..a8b2c0de27c4 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -647,7 +647,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 				if (!(rxcw & E1000_RXCW_IV)) {
 					mac->serdes_has_link = true;
 					e_dbg("SERDES: Link up - autoneg "
-					   "completed sucessfully.\n");
+					   "completed successfully.\n");
 				} else {
 					mac->serdes_has_link = false;
 					e_dbg("SERDES: Link down - invalid"
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 61a7b4351e78..b6715553cf17 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2021,7 +2021,6 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	/* setup the TxBD length and buffer pointer for the first BD */
-	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
 	txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
 			skb_headlen(skb), DMA_TO_DEVICE);
 
@@ -2053,6 +2052,10 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	txbdp_start->lstatus = lstatus;
 
+	eieio(); /* force lstatus write before tx_skbuff */
+
+	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
+
 	/* Update the current skb pointer to the next entry we will use
 	 * (wrapping if necessary) */
 	tx_queue->skb_curtx = (tx_queue->skb_curtx + 1) &
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index f2b937966950..0bc777bac9b4 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1577,7 +1577,7 @@ static struct attribute * veth_pool_attrs[] = {
 	NULL,
 };
 
-static struct sysfs_ops veth_pool_ops = {
+static const struct sysfs_ops veth_pool_ops = {
 	.show   = veth_pool_show,
 	.store  = veth_pool_store,
 };
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 583a21c1def3..0ed25f059a00 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -688,7 +688,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter)
 	/* start with one vector for every rx queue */
 	numvecs = adapter->num_rx_queues;
 
-	/* if tx handler is seperate add 1 for every tx queue */
+	/* if tx handler is separate add 1 for every tx queue */
 	if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
 		numvecs += adapter->num_tx_queues;
 
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index e8e33bb9d876..2c9b3af16612 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1651,6 +1651,8 @@ static int irda_usb_probe(struct usb_interface *intf,
 
 	self->rx_urb = kcalloc(self->max_rx_urb, sizeof(struct urb *),
 				GFP_KERNEL);
+	if (!self->rx_urb)
+		goto err_free_net;
 
 	for (i = 0; i < self->max_rx_urb; i++) {
 		self->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
@@ -1783,6 +1785,8 @@ err_out_2:
 err_out_1:
 	for (i = 0; i < self->max_rx_urb; i++)
 		usb_free_urb(self->rx_urb[i]);
+	kfree(self->rx_urb);
+err_free_net:
 	free_netdev(net);
 err_out:
 	return ret;
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index c412e8026173..1dcdce0631aa 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -331,7 +331,7 @@ static int sa1100_irda_resume(struct platform_device *pdev)
 		 * If we missed a speed change, initialise at the new speed
 		 * directly.  It is debatable whether this is actually
 		 * required, but in the interests of continuing from where
-		 * we left off it is desireable.  The converse argument is
+		 * we left off it is desirable.  The converse argument is
 		 * that we should re-negotiate at 9600 baud again.
 		 */
 		if (si->newspeed) {
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 966de5d69521..e6e972d9b7ca 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -384,7 +384,7 @@ static struct attribute *veth_cnx_default_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops veth_cnx_sysfs_ops = {
+static const struct sysfs_ops veth_cnx_sysfs_ops = {
 		.show = veth_cnx_attribute_show
 };
 
@@ -441,7 +441,7 @@ static struct attribute *veth_port_default_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops veth_port_sysfs_ops = {
+static const struct sysfs_ops veth_port_sysfs_ops = {
 	.show = veth_port_attribute_show
 };
 
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index b5219cce12ed..0573e0bb4444 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -407,7 +407,7 @@ static irqreturn_t ks8851_irq(int irq, void *pw)
  * @buff: The buffer address
  * @len: The length of the data to read
  *
- * Issue an RXQ FIFO read command and read the @len ammount of data from
+ * Issue an RXQ FIFO read command and read the @len amount of data from
  * the FIFO into the buffer specified by @buff.
  */
 static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index b40a851ec7d1..0da94b208db1 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -423,6 +423,11 @@ struct qlcnic_adapter_stats {
 	u64  lro_pkts;
 	u64  rxbytes;
 	u64  txbytes;
+	u64  lrobytes;
+	u64  lso_frames;
+	u64  xmit_on;
+	u64  xmit_off;
+	u64  skb_alloc_failure;
 };
 
 /*
@@ -1095,11 +1100,11 @@ struct qlcnic_brdinfo {
 
 static const struct qlcnic_brdinfo qlcnic_boards[] = {
 	{0x1077, 0x8020, 0x1077, 0x203,
-		"8200 Series Single Port 10GbE Converged Network Adapter \
-		(TCP/IP Networking)"},
+		"8200 Series Single Port 10GbE Converged Network Adapter "
+		"(TCP/IP Networking)"},
 	{0x1077, 0x8020, 0x1077, 0x207,
-		"8200 Series Dual Port 10GbE Converged Network Adapter \
-		(TCP/IP Networking)"},
+		"8200 Series Dual Port 10GbE Converged Network Adapter "
+		"(TCP/IP Networking)"},
 	{0x1077, 0x8020, 0x1077, 0x20b,
 		"3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"},
 	{0x1077, 0x8020, 0x1077, 0x20c,
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index 8da6ec8c13b9..f83e15fe3e1b 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -59,6 +59,17 @@ static const struct qlcnic_stats qlcnic_gstrings_stats[] = {
 		QLC_SIZEOF(stats.rxbytes), QLC_OFF(stats.rxbytes)},
 	{"tx_bytes",
 		QLC_SIZEOF(stats.txbytes), QLC_OFF(stats.txbytes)},
+	{"lrobytes",
+		QLC_SIZEOF(stats.lrobytes), QLC_OFF(stats.lrobytes)},
+	{"lso_frames",
+		QLC_SIZEOF(stats.lso_frames), QLC_OFF(stats.lso_frames)},
+	{"xmit_on",
+		QLC_SIZEOF(stats.xmit_on), QLC_OFF(stats.xmit_on)},
+	{"xmit_off",
+		QLC_SIZEOF(stats.xmit_off), QLC_OFF(stats.xmit_off)},
+	{"skb_alloc_failure", QLC_SIZEOF(stats.skb_alloc_failure),
+		QLC_OFF(stats.skb_alloc_failure)},
+
 };
 
 #define QLCNIC_STATS_LEN	ARRAY_SIZE(qlcnic_gstrings_stats)
@@ -785,6 +796,11 @@ qlcnic_get_ethtool_stats(struct net_device *dev,
 	}
 }
 
+static u32 qlcnic_get_tx_csum(struct net_device *dev)
+{
+	return dev->features & NETIF_F_IP_CSUM;
+}
+
 static u32 qlcnic_get_rx_csum(struct net_device *dev)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
@@ -995,6 +1011,7 @@ const struct ethtool_ops qlcnic_ethtool_ops = {
 	.set_ringparam = qlcnic_set_ringparam,
 	.get_pauseparam = qlcnic_get_pauseparam,
 	.set_pauseparam = qlcnic_set_pauseparam,
+	.get_tx_csum = qlcnic_get_tx_csum,
 	.set_tx_csum = ethtool_op_set_tx_csum,
 	.set_sg = ethtool_op_set_sg,
 	.get_tso = qlcnic_get_tso,
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 99a4d1379d00..da00e162b6d3 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -349,6 +349,7 @@ qlcnic_send_cmd_descs(struct qlcnic_adapter *adapter,
 	if (nr_desc >= qlcnic_tx_avail(tx_ring)) {
 		netif_tx_stop_queue(tx_ring->txq);
 		__netif_tx_unlock_bh(tx_ring->txq);
+		adapter->stats.xmit_off++;
 		return -EBUSY;
 	}
 
@@ -397,20 +398,16 @@ qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
 	return qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 }
 
-static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter,
-		u8 *addr, struct list_head *del_list)
+static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, u8 *addr)
 {
 	struct list_head *head;
 	struct qlcnic_mac_list_s *cur;
 
 	/* look up if already exists */
-	list_for_each(head, del_list) {
+	list_for_each(head, &adapter->mac_list) {
 		cur = list_entry(head, struct qlcnic_mac_list_s, list);
-
-		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) {
-			list_move_tail(head, &adapter->mac_list);
+		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0)
 			return 0;
-		}
 	}
 
 	cur = kzalloc(sizeof(struct qlcnic_mac_list_s), GFP_ATOMIC);
@@ -432,14 +429,9 @@ void qlcnic_set_multi(struct net_device *netdev)
 	struct dev_mc_list *mc_ptr;
 	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 	u32 mode = VPORT_MISS_MODE_DROP;
-	LIST_HEAD(del_list);
-	struct list_head *head;
-	struct qlcnic_mac_list_s *cur;
 
-	list_splice_tail_init(&adapter->mac_list, &del_list);
-
-	qlcnic_nic_add_mac(adapter, adapter->mac_addr, &del_list);
-	qlcnic_nic_add_mac(adapter, bcast_addr, &del_list);
+	qlcnic_nic_add_mac(adapter, adapter->mac_addr);
+	qlcnic_nic_add_mac(adapter, bcast_addr);
 
 	if (netdev->flags & IFF_PROMISC) {
 		mode = VPORT_MISS_MODE_ACCEPT_ALL;
@@ -454,22 +446,12 @@ void qlcnic_set_multi(struct net_device *netdev)
 
 	if (!netdev_mc_empty(netdev)) {
 		netdev_for_each_mc_addr(mc_ptr, netdev) {
-			qlcnic_nic_add_mac(adapter, mc_ptr->dmi_addr,
-							&del_list);
+			qlcnic_nic_add_mac(adapter, mc_ptr->dmi_addr);
 		}
 	}
 
 send_fw_cmd:
 	qlcnic_nic_set_promisc(adapter, mode);
-	head = &del_list;
-	while (!list_empty(head)) {
-		cur = list_entry(head->next, struct qlcnic_mac_list_s, list);
-
-		qlcnic_sre_macaddr_change(adapter,
-				cur->mac_addr, QLCNIC_MAC_DEL);
-		list_del(&cur->list);
-		kfree(cur);
-	}
 }
 
 int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode)
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index ea00ab4d4feb..7c34e4e29b3f 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -568,21 +568,123 @@ struct uni_table_desc *qlcnic_get_table_desc(const u8 *unirom, int section)
 	return NULL;
 }
 
+#define FILEHEADER_SIZE (14 * 4)
+
 static int
-qlcnic_set_product_offs(struct qlcnic_adapter *adapter)
+qlcnic_validate_header(struct qlcnic_adapter *adapter)
 {
-	struct uni_table_desc *ptab_descr;
 	const u8 *unirom = adapter->fw->data;
-	u32 i;
+	struct uni_table_desc *directory = (struct uni_table_desc *) &unirom[0];
+	__le32 fw_file_size = adapter->fw->size;
 	__le32 entries;
+	__le32 entry_size;
+	__le32 tab_size;
+
+	if (fw_file_size < FILEHEADER_SIZE)
+		return -EINVAL;
+
+	entries = cpu_to_le32(directory->num_entries);
+	entry_size = cpu_to_le32(directory->entry_size);
+	tab_size = cpu_to_le32(directory->findex) + (entries * entry_size);
+
+	if (fw_file_size < tab_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_bootld(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *tab_desc;
+	struct uni_data_desc *descr;
+	const u8 *unirom = adapter->fw->data;
+	int idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+				QLCNIC_UNI_BOOTLD_IDX_OFF));
+	__le32 offs;
+	__le32 tab_size;
+	__le32 data_size;
+
+	tab_desc = qlcnic_get_table_desc(unirom, QLCNIC_UNI_DIR_SECT_BOOTLD);
+
+	if (!tab_desc)
+		return -EINVAL;
+
+	tab_size = cpu_to_le32(tab_desc->findex) +
+			(cpu_to_le32(tab_desc->entry_size * (idx + 1)));
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
+	offs = cpu_to_le32(tab_desc->findex) +
+		(cpu_to_le32(tab_desc->entry_size) * (idx));
+	descr = (struct uni_data_desc *)&unirom[offs];
+
+	data_size = descr->findex + cpu_to_le32(descr->size);
+
+	if (adapter->fw->size < data_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_fw(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *tab_desc;
+	struct uni_data_desc *descr;
+	const u8 *unirom = adapter->fw->data;
+	int idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+				QLCNIC_UNI_FIRMWARE_IDX_OFF));
+	__le32 offs;
+	__le32 tab_size;
+	__le32 data_size;
+
+	tab_desc = qlcnic_get_table_desc(unirom, QLCNIC_UNI_DIR_SECT_FW);
+
+	if (!tab_desc)
+		return -EINVAL;
+
+	tab_size = cpu_to_le32(tab_desc->findex) +
+			(cpu_to_le32(tab_desc->entry_size * (idx + 1)));
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
+	offs = cpu_to_le32(tab_desc->findex) +
+		(cpu_to_le32(tab_desc->entry_size) * (idx));
+	descr = (struct uni_data_desc *)&unirom[offs];
+	data_size = descr->findex + cpu_to_le32(descr->size);
+
+	if (adapter->fw->size < data_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_product_offs(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *ptab_descr;
+	const u8 *unirom = adapter->fw->data;
 	int mn_present = qlcnic_has_mn(adapter);
+	__le32 entries;
+	__le32 entry_size;
+	__le32 tab_size;
+	u32 i;
 
 	ptab_descr = qlcnic_get_table_desc(unirom,
 				QLCNIC_UNI_DIR_SECT_PRODUCT_TBL);
-	if (ptab_descr == NULL)
-		return -1;
+	if (!ptab_descr)
+		return -EINVAL;
 
 	entries = cpu_to_le32(ptab_descr->num_entries);
+	entry_size = cpu_to_le32(ptab_descr->entry_size);
+	tab_size = cpu_to_le32(ptab_descr->findex) + (entries * entry_size);
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
 nomn:
 	for (i = 0; i < entries; i++) {
 
@@ -609,7 +711,37 @@ nomn:
 		mn_present = 0;
 		goto nomn;
 	}
-	return -1;
+	return -EINVAL;
+}
+
+static int
+qlcnic_validate_unified_romimage(struct qlcnic_adapter *adapter)
+{
+	if (qlcnic_validate_header(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: header validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_product_offs(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: product validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_bootld(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: bootld validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_fw(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: firmware validation failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
 }
 
 static
@@ -715,7 +847,7 @@ qlcnic_get_bios_version(struct qlcnic_adapter *adapter)
 	bios_ver = cpu_to_le32(*((u32 *) (&fw->data[prd_off])
 				+ QLCNIC_UNI_BIOS_VERSION_OFF));
 
-	return (bios_ver << 24) + ((bios_ver >> 8) & 0xff00) + (bios_ver >> 24);
+	return (bios_ver << 16) + ((bios_ver >> 8) & 0xff00) + (bios_ver >> 24);
 }
 
 int
@@ -858,7 +990,7 @@ qlcnic_validate_firmware(struct qlcnic_adapter *adapter)
 	u8 fw_type = adapter->fw_type;
 
 	if (fw_type == QLCNIC_UNIFIED_ROMIMAGE) {
-		if (qlcnic_set_product_offs(adapter))
+		if (qlcnic_validate_unified_romimage(adapter))
 			return -EINVAL;
 
 		min_size = QLCNIC_UNI_FW_MIN_SIZE;
@@ -1114,8 +1246,10 @@ qlcnic_alloc_rx_skb(struct qlcnic_adapter *adapter,
 	struct pci_dev *pdev = adapter->pdev;
 
 	buffer->skb = dev_alloc_skb(rds_ring->skb_size);
-	if (!buffer->skb)
+	if (!buffer->skb) {
+		adapter->stats.skb_alloc_failure++;
 		return -ENOMEM;
+	}
 
 	skb = buffer->skb;
 
@@ -1289,7 +1423,7 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter,
 	netif_receive_skb(skb);
 
 	adapter->stats.lro_pkts++;
-	adapter->stats.rxbytes += length;
+	adapter->stats.lrobytes += length;
 
 	return buffer;
 }
@@ -1505,6 +1639,8 @@ qlcnic_process_rcv_diag(struct qlcnic_adapter *adapter,
 		adapter->diag_cnt++;
 
 	dev_kfree_skb_any(skb);
+	adapter->stats.rx_pkts++;
+	adapter->stats.rxbytes += length;
 
 	return buffer;
 }
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 665e8e56b6a8..fc721564e69e 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -118,6 +118,7 @@ qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
 	if (qlcnic_tx_avail(tx_ring) <= TX_STOP_THRESH) {
 		netif_stop_queue(adapter->netdev);
 		smp_mb();
+		adapter->stats.xmit_off++;
 	}
 }
 
@@ -1385,6 +1386,7 @@ qlcnic_tso_check(struct net_device *netdev,
 	int copied, offset, copy_len, hdr_len = 0, tso = 0, vlan_oob = 0;
 	struct cmd_desc_type0 *hwdesc;
 	struct vlan_ethhdr *vh;
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 
 	if (protocol == cpu_to_be16(ETH_P_8021Q)) {
 
@@ -1494,6 +1496,7 @@ qlcnic_tso_check(struct net_device *netdev,
 
 	tx_ring->producer = producer;
 	barrier();
+	adapter->stats.lso_frames++;
 }
 
 static int
@@ -1573,6 +1576,7 @@ qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	if (unlikely(no_of_desc + 2 > qlcnic_tx_avail(tx_ring))) {
 		netif_stop_queue(netdev);
+		adapter->stats.xmit_off++;
 		return NETDEV_TX_BUSY;
 	}
 
@@ -1880,6 +1884,7 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter)
 			if (qlcnic_tx_avail(tx_ring) > TX_STOP_THRESH) {
 				netif_wake_queue(netdev);
 				adapter->tx_timeo_cnt = 0;
+				adapter->stats.xmit_on++;
 			}
 			__netif_tx_unlock(tx_ring->txq);
 		}
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 05b8bde9980d..7dbff87480dc 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -405,7 +405,7 @@ static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
 		u32 wol = 0;
 		status = ql_mb_wol_mode(qdev, wol);
 		netif_err(qdev, drv, qdev->ndev, "WOL %s (wol code 0x%x)\n",
-			  status == 0 ? "cleared sucessfully" : "clear failed",
+			  status == 0 ? "cleared successfully" : "clear failed",
 			  wol);
 	}
 
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c26ec5d740f6..fd34f266c0a8 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3855,7 +3855,7 @@ int ql_wol(struct ql_adapter *qdev)
 		status = ql_mb_wol_mode(qdev, wol);
 		netif_err(qdev, drv, qdev->ndev,
 			  "WOL %s (wol code 0x%x) on %s\n",
-			  (status == 0) ? "Sucessfully set" : "Failed",
+			  (status == 0) ? "Successfully set" : "Failed",
 			  wol, qdev->ndev->name);
 	}
 
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index dfc3573c91bb..9d3ebf3e975e 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -4270,7 +4270,7 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 
 	tp->cur_tx += frags + 1;
 
-	smp_wmb();
+	wmb();
 
 	RTL_W8(TxPoll, NPQ);	/* set polling bit */
 
@@ -4621,7 +4621,7 @@ static int rtl8169_poll(struct napi_struct *napi, int budget)
 		 * until it does.
 		 */
 		tp->intr_mask = 0xffff;
-		smp_wmb();
+		wmb();
 		RTL_W16(IntrMask, tp->intr_event);
 	}
 
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 43bc66aa8405..df70657260dd 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -923,8 +923,8 @@ static int init_shared_mem(struct s2io_nic *nic)
 	tmp_v_addr = mac_control->stats_mem;
 	mac_control->stats_info = (struct stat_block *)tmp_v_addr;
 	memset(tmp_v_addr, 0, size);
-	DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n", dev->name,
-		  (unsigned long long)tmp_p_addr);
+	DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n",
+		dev_name(&nic->pdev->dev), (unsigned long long)tmp_p_addr);
 	mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
 	return SUCCESS;
 }
@@ -3480,7 +3480,7 @@ static void s2io_reset(struct s2io_nic *sp)
 	struct swStat *swstats;
 
 	DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n",
-		  __func__, sp->dev->name);
+		  __func__, pci_name(sp->pdev));
 
 	/* Back up  the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
 	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
diff --git a/drivers/net/sfc/regs.h b/drivers/net/sfc/regs.h
index 89d606fe9248..18a3be428348 100644
--- a/drivers/net/sfc/regs.h
+++ b/drivers/net/sfc/regs.h
@@ -95,7 +95,7 @@
 #define	FRF_AA_INT_ACK_KER_FIELD_LBN 0
 #define	FRF_AA_INT_ACK_KER_FIELD_WIDTH 32
 
-/* INT_ISR0_REG: Function 0 Interrupt Acknowlege Status register */
+/* INT_ISR0_REG: Function 0 Interrupt Acknowledge Status register */
 #define	FR_BZ_INT_ISR0 0x00000090
 #define	FRF_BZ_INT_ISR_REG_LBN 0
 #define	FRF_BZ_INT_ISR_REG_WIDTH 64
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index a85efcfd9d0e..e8387d25f24a 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -557,7 +557,7 @@ static void ess_send_alc_req(struct s_smc *smc)
 
 	/*
 	 * send never allocation request where the requested payload and
-	 * overhead is zero or deallocate bandwidht when no bandwidth is
+	 * overhead is zero or deallocate bandwidth when no bandwidth is
 	 * parsed
 	 */
 	if (!smc->mib.fddiESSPayload) {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 653bdd76ef46..d8ec4c11fd49 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -4863,6 +4863,7 @@ static int sky2_resume(struct pci_dev *pdev)
 	if (!hw)
 		return 0;
 
+	rtnl_lock();
 	err = pci_set_power_state(pdev, PCI_D0);
 	if (err)
 		goto out;
@@ -4884,7 +4885,6 @@ static int sky2_resume(struct pci_dev *pdev)
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 	napi_enable(&hw->napi);
 
-	rtnl_lock();
 	for (i = 0; i < hw->ports; i++) {
 		err = sky2_reattach(hw->dev[i]);
 		if (err)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 54799544bda3..8d2772cc42f2 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -330,6 +330,48 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 
 #include <unit/smc91111.h>
 
+#elif defined(CONFIG_ARCH_MSM)
+
+#define SMC_CAN_USE_8BIT	0
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	0
+#define SMC_NOWAIT		1
+
+#define SMC_inw(a, r)		readw((a) + (r))
+#define SMC_outw(v, a, r)	writew(v, (a) + (r))
+#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
+
+#define SMC_IRQ_FLAGS		IRQF_TRIGGER_HIGH
+
+#elif defined(CONFIG_COLDFIRE)
+
+#define SMC_CAN_USE_8BIT	0
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	0
+#define SMC_NOWAIT		1
+
+static inline void mcf_insw(void *a, unsigned char *p, int l)
+{
+	u16 *wp = (u16 *) p;
+	while (l-- > 0)
+		*wp++ = readw(a);
+}
+
+static inline void mcf_outsw(void *a, unsigned char *p, int l)
+{
+	u16 *wp = (u16 *) p;
+	while (l-- > 0)
+		writew(*wp++, a);
+}
+
+#define SMC_inw(a, r)		_swapw(readw((a) + (r)))
+#define SMC_outw(v, a, r)	writew(_swapw(v), (a) + (r))
+#define SMC_insw(a, r, p, l)	mcf_insw(a + r, p, l)
+#define SMC_outsw(a, r, p, l)	mcf_outsw(a + r, p, l)
+
+#define SMC_IRQ_FLAGS		(IRQF_DISABLED)
+
 #else
 
 /*
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index 30110a11d737..34fa10d8ad40 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -1347,7 +1347,7 @@ static int smsc9420_open(struct net_device *dev)
 
 	netif_carrier_off(dev);
 
-	/* disable, mask and acknowlege all interrupts */
+	/* disable, mask and acknowledge all interrupts */
 	spin_lock_irqsave(&pd->int_lock, flags);
 	int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_);
 	smsc9420_reg_write(pd, INT_CFG, int_cfg);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 2f8a8c32021e..5ba9d989f8fc 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -474,7 +474,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
  * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
  * @card: card structure
  *
- * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
+ * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the
  * chip by writing to the appropriate register. DMA is enabled in
  * spider_net_enable_rxdmac.
  */
@@ -1820,7 +1820,7 @@ spider_net_enable_card(struct spider_net_card *card)
 
 	spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
 
-	/* set chain tail adress for RX chains and
+	/* set chain tail address for RX chains and
 	 * enable DMA */
 	spider_net_enable_rxchtails(card);
 	spider_net_enable_rxdmac(card);
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 4344017bfaef..70196bc5fe61 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -782,7 +782,7 @@ static int gem_rx(struct gem *gp, int work_to_do)
 			break;
 
 		/* When writing back RX descriptor, GEM writes status
-		 * then buffer address, possibly in seperate transactions.
+		 * then buffer address, possibly in separate transactions.
 		 * If we don't wait for the chip to write both, we could
 		 * post a new buffer to this descriptor then have GEM spam
 		 * on the buffer address.  We sync on the RX completion
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 0c9780217c87..f5493092521a 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1851,7 +1851,7 @@ static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
  * @data - desc's data
  * @size - desc's size
  *
- * NOTE: this func does check for available space and, if neccessary, waits for
+ * NOTE: this func does check for available space and, if necessary, waits for
  *   NIC to read existing data before writing new one.
  */
 static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 0fa7688ab483..22cf1c446de3 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5279,7 +5279,7 @@ static void tg3_poll_controller(struct net_device *dev)
 	struct tg3 *tp = netdev_priv(dev);
 
 	for (i = 0; i < tp->irq_cnt; i++)
-		tg3_interrupt(tp->napi[i].irq_vec, dev);
+		tg3_interrupt(tp->napi[i].irq_vec, &tp->napi[i]);
 }
 #endif
 
@@ -9776,7 +9776,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 			   ADVERTISED_Pause |
 			   ADVERTISED_Asym_Pause;
 
-		if (!(tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
+		if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY))
 			mask |= ADVERTISED_1000baseT_Half |
 				ADVERTISED_1000baseT_Full;
 
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 21a01753312a..ee71bcfb3753 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -693,7 +693,7 @@ static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb,
  * NOTE: This function should be used whenever the status of any TPL must be
  * modified by the driver, because the compiler may otherwise change the
  * order of instructions such that writing the TPL status may be executed at
- * an undesireable time. When this function is used, the status is always
+ * an undesirable time. When this function is used, the status is always
  * written when the function is called.
  */
 static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status)
@@ -2264,7 +2264,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev)
  * This function should be used whenever the status of any RPL must be
  * modified by the driver, because the compiler may otherwise change the
  * order of instructions such that writing the RPL status may be executed
- * at an undesireable time. When this function is used, the status is
+ * at an undesirable time. When this function is used, the status is
  * always written when the function is called.
  */
 static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status)
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 93f4e8309f81..49f05d1431f5 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -143,6 +143,12 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
 
 void __devinit tulip_parse_eeprom(struct net_device *dev)
 {
+	/*
+	  dev is not registered at this point, so logging messages can't
+	  use dev_<level> or netdev_<level> but dev->name is good via a
+	  hack in the caller
+	*/
+
 	/* The last media info list parsed, for multiport boards.  */
 	static struct mediatable *last_mediatable;
 	static unsigned char *last_ee_data;
@@ -161,15 +167,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
 		if (ee_data[0] == 0xff) {
 			if (last_mediatable) {
 				controller_index++;
-				dev_info(&dev->dev,
-					 "Controller %d of multiport board\n",
-					 controller_index);
+				pr_info("%s: Controller %d of multiport board\n",
+					dev->name, controller_index);
 				tp->mtable = last_mediatable;
 				ee_data = last_ee_data;
 				goto subsequent_board;
 			} else
-				dev_info(&dev->dev,
-					 "Missing EEPROM, this interface may not work correctly!\n");
+				pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
+					dev->name);
 			return;
 		}
 	  /* Do a fix-up based on the vendor half of the station address prefix. */
@@ -181,15 +186,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
 			  i++;			/* An Accton EN1207, not an outlaw Maxtech. */
 		  memcpy(ee_data + 26, eeprom_fixups[i].newtable,
 				 sizeof(eeprom_fixups[i].newtable));
-		  dev_info(&dev->dev,
-			   "Old format EEPROM on '%s' board.  Using substitute media control info\n",
-			   eeprom_fixups[i].name);
+		  pr_info("%s: Old format EEPROM on '%s' board.  Using substitute media control info\n",
+			  dev->name, eeprom_fixups[i].name);
 		  break;
 		}
 	  }
 	  if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
-		  dev_info(&dev->dev,
-			   "Old style EEPROM with no media selection information\n");
+		  pr_info("%s: Old style EEPROM with no media selection information\n",
+			  dev->name);
 		return;
 	  }
 	}
@@ -217,8 +221,8 @@ subsequent_board:
 	        /* there is no phy information, don't even try to build mtable */
 	        if (count == 0) {
 			if (tulip_debug > 0)
-				dev_warn(&dev->dev,
-					 "no phy info, aborting mtable build\n");
+				pr_warning("%s: no phy info, aborting mtable build\n",
+					   dev->name);
 		        return;
 		}
 
@@ -234,8 +238,10 @@ subsequent_board:
 		mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
 		mtable->csr15dir = mtable->csr15val = 0;
 
-		dev_info(&dev->dev, "EEPROM default media type %s\n",
-			 media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
+		pr_info("%s: EEPROM default media type %s\n",
+			dev->name,
+			media & 0x0800 ? "Autosense"
+				       : medianame[media & MEDIA_MASK]);
 		for (i = 0; i < count; i++) {
 			struct medialeaf *leaf = &mtable->mleaf[i];
 
@@ -298,17 +304,17 @@ subsequent_board:
 			}
 			if (tulip_debug > 1  &&  leaf->media == 11) {
 				unsigned char *bp = leaf->leafdata;
-				dev_info(&dev->dev,
-					 "MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
-					 bp[0], bp[1], bp[2 + bp[1]*2],
-					 bp[5 + bp[2 + bp[1]*2]*2],
-					 bp[4 + bp[2 + bp[1]*2]*2]);
+				pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
+					dev->name,
+					bp[0], bp[1], bp[2 + bp[1]*2],
+					bp[5 + bp[2 + bp[1]*2]*2],
+					bp[4 + bp[2 + bp[1]*2]*2]);
 			}
-			dev_info(&dev->dev,
-				 "Index #%d - Media %s (#%d) described by a %s (%d) block\n",
-				 i, medianame[leaf->media & 15], leaf->media,
-				 leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
-				 leaf->type);
+			pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
+				dev->name,
+				i, medianame[leaf->media & 15], leaf->media,
+				leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
+				leaf->type);
 		}
 		if (new_advertise)
 			tp->sym_advertise = new_advertise;
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index ce1efa4c0b0d..96c39bddc78c 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1437,7 +1437,7 @@ static int tun_chr_close(struct inode *inode, struct file *file)
 
 		__tun_detach(tun);
 
-		/* If desireable, unregister the netdevice. */
+		/* If desirable, unregister the netdevice. */
 		if (!(tun->flags & TUN_PERSIST)) {
 			rtnl_lock();
 			if (dev->reg_state == NETREG_REGISTERED)
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index e3ddcb8f29df..cd24e5f2b2a2 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -480,7 +480,7 @@ typhoon_hello(struct typhoon *tp)
 		typhoon_inc_cmd_index(&ring->lastWrite, 1);
 
 		INIT_COMMAND_NO_RESPONSE(cmd, TYPHOON_CMD_HELLO_RESP);
-		smp_wmb();
+		wmb();
 		iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
 		spin_unlock(&tp->command_lock);
 	}
@@ -1311,13 +1311,15 @@ typhoon_init_interface(struct typhoon *tp)
 
 	tp->txlo_dma_addr = le32_to_cpu(iface->txLoAddr);
 	tp->card_state = Sleeping;
-	smp_wmb();
 
 	tp->offload = TYPHOON_OFFLOAD_IP_CHKSUM | TYPHOON_OFFLOAD_TCP_CHKSUM;
 	tp->offload |= TYPHOON_OFFLOAD_UDP_CHKSUM | TSO_OFFLOAD_ON;
 
 	spin_lock_init(&tp->command_lock);
 	spin_lock_init(&tp->state_lock);
+
+	/* Force the writes to the shared memory area out before continuing. */
+	wmb();
 }
 
 static void
@@ -2096,7 +2098,7 @@ typhoon_tx_timeout(struct net_device *dev)
 
 	if(typhoon_reset(tp->ioaddr, WaitNoSleep) < 0) {
 		netdev_warn(dev, "could not reset in tx timeout\n");
-		goto truely_dead;
+		goto truly_dead;
 	}
 
 	/* If we ever start using the Hi ring, it will need cleaning too */
@@ -2105,13 +2107,13 @@ typhoon_tx_timeout(struct net_device *dev)
 
 	if(typhoon_start_runtime(tp) < 0) {
 		netdev_err(dev, "could not start runtime in tx timeout\n");
-		goto truely_dead;
+		goto truly_dead;
         }
 
 	netif_wake_queue(dev);
 	return;
 
-truely_dead:
+truly_dead:
 	/* Reset the hardware, and turn off carrier to avoid more timeouts */
 	typhoon_reset(tp->ioaddr, NoWait);
 	netif_carrier_off(dev);
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 23a97518bc1f..1b0aef37e495 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -430,7 +430,7 @@ static void hw_add_addr_in_hash(struct ucc_geth_private *ugeth,
 	    ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num);
 
 	/* Ethernet frames are defined in Little Endian mode,
-	therefor to insert */
+	therefore to insert */
 	/* the address to the hash (Big Endian mode), we reverse the bytes.*/
 
 	set_mac_addr(&p_82xx_addr_filt->taddr.h, p_enet_addr);
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 20e34608fa4a..9e05639435f2 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -54,6 +54,7 @@ static const char driver_name [] = "asix";
 #define AX_CMD_WRITE_IPG0		0x12
 #define AX_CMD_WRITE_IPG1		0x13
 #define AX_CMD_READ_NODE_ID		0x13
+#define AX_CMD_WRITE_NODE_ID		0x14
 #define AX_CMD_WRITE_IPG2		0x14
 #define AX_CMD_WRITE_MULTI_FILTER	0x16
 #define AX88172_CMD_READ_NODE_ID	0x17
@@ -165,6 +166,7 @@ static const char driver_name [] = "asix";
 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
 struct asix_data {
 	u8 multi_filter[AX_MCAST_FILTER_SIZE];
+	u8 mac_addr[ETH_ALEN];
 	u8 phymode;
 	u8 ledmode;
 	u8 eeprom_len;
@@ -732,6 +734,30 @@ static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 }
 
+static int asix_set_mac_address(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct sockaddr *addr = p;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+	/* We use the 20 byte dev->data
+	 * for our 6 byte mac buffer
+	 * to avoid allocating memory that
+	 * is tricky to free later */
+	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+	asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+
+	return 0;
+}
+
 /* We need to override some ethtool_ops so we require our
    own structure so we don't interfere with other usbnet
    devices that may be connected at the same time. */
@@ -919,7 +945,7 @@ static const struct net_device_ops ax88772_netdev_ops = {
 	.ndo_start_xmit		= usbnet_start_xmit,
 	.ndo_tx_timeout		= usbnet_tx_timeout,
 	.ndo_change_mtu		= usbnet_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address 	= asix_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= asix_ioctl,
 	.ndo_set_multicast_list = asix_set_multicast,
@@ -1213,7 +1239,7 @@ static const struct net_device_ops ax88178_netdev_ops = {
 	.ndo_stop		= usbnet_stop,
 	.ndo_start_xmit		= usbnet_start_xmit,
 	.ndo_tx_timeout		= usbnet_tx_timeout,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address 	= asix_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_multicast_list = asix_set_multicast,
 	.ndo_do_ioctl 		= asix_ioctl,
diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h
index 5d02f0200737..b90d8766ab74 100644
--- a/drivers/net/usb/pegasus.h
+++ b/drivers/net/usb/pegasus.h
@@ -177,7 +177,7 @@ PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
 PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
-		DEFAULT_GPIO_RESET | PEGASUS_II ) 	
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
@@ -208,6 +208,8 @@ PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
  */
 PEGASUS_DEV_CLASS( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Belkin F5U122 10/100 USB Ethernet", VENDOR_BELKIN, 0x0122,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
@@ -249,7 +251,7 @@ PEGASUS_DEV( "GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
 PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
-		DEFAULT_GPIO_RESET | PEGASUS_II )	
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index b36bf96eb502..f0bd70fb650c 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -811,7 +811,7 @@ static ssize_t cosa_read(struct file *file,
 	cosa_enable_rx(chan);
 	spin_lock_irqsave(&cosa->lock, flags);
 	add_wait_queue(&chan->rxwaitq, &wait);
-	while(!chan->rx_status) {
+	while (!chan->rx_status) {
 		current->state = TASK_INTERRUPTIBLE;
 		spin_unlock_irqrestore(&cosa->lock, flags);
 		schedule();
@@ -896,7 +896,7 @@ static ssize_t cosa_write(struct file *file,
 
 	spin_lock_irqsave(&cosa->lock, flags);
 	add_wait_queue(&chan->txwaitq, &wait);
-	while(!chan->tx_status) {
+	while (!chan->tx_status) {
 		current->state = TASK_INTERRUPTIBLE;
 		spin_unlock_irqrestore(&cosa->lock, flags);
 		schedule();
@@ -1153,7 +1153,7 @@ static int cosa_ioctl_common(struct cosa_data *cosa,
 	struct channel_data *channel, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
-	switch(cmd) {
+	switch (cmd) {
 	case COSAIORSET:	/* Reset the device */
 		if (!capable(CAP_NET_ADMIN))
 			return -EACCES;
@@ -1704,7 +1704,7 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
 			spin_unlock_irqrestore(&cosa->lock, flags);
 			return;
 		}
-		while(1) {
+		while (1) {
 			cosa->txchan++;
 			i++;
 			if (cosa->txchan >= cosa->nchannels)
@@ -2010,7 +2010,7 @@ again:
 static void debug_status_in(struct cosa_data *cosa, int status)
 {
 	char *s;
-	switch(status & SR_CMD_FROM_SRP_MASK) {
+	switch (status & SR_CMD_FROM_SRP_MASK) {
 	case SR_UP_REQUEST:
 		s = "RX_REQ";
 		break;
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index f1bff98acd1f..1ceccf1ca6c7 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -141,7 +141,7 @@ static __be16 cisco_type_trans(struct sk_buff *skb, struct net_device *dev)
 	    data->address != CISCO_UNICAST)
 		return cpu_to_be16(ETH_P_HDLC);
 
-	switch(data->protocol) {
+	switch (data->protocol) {
 	case cpu_to_be16(ETH_P_IP):
 	case cpu_to_be16(ETH_P_IPX):
 	case cpu_to_be16(ETH_P_IPV6):
@@ -190,7 +190,7 @@ static int cisco_rx(struct sk_buff *skb)
 		cisco_data = (struct cisco_packet*)(skb->data + sizeof
 						    (struct hdlc_header));
 
-		switch(ntohl (cisco_data->type)) {
+		switch (ntohl (cisco_data->type)) {
 		case CISCO_ADDR_REQ: /* Stolen from syncppp.c :-) */
 			in_dev = dev->ip_ptr;
 			addr = 0;
@@ -245,8 +245,8 @@ static int cisco_rx(struct sk_buff *skb)
 
 			dev_kfree_skb_any(skb);
 			return NET_RX_SUCCESS;
-		} /* switch(keepalive type) */
-	} /* switch(protocol) */
+		} /* switch (keepalive type) */
+	} /* switch (protocol) */
 
 	printk(KERN_INFO "%s: Unsupported protocol %x\n", dev->name,
 	       ntohs(data->protocol));
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index aa9248f8eb1a..6e1ca256effd 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -202,10 +202,10 @@ static int x25_ioctl(struct net_device *dev, struct ifreq *ifr)
 		return 0; /* return protocol only, no settable parameters */
 
 	case IF_PROTO_X25:
-		if(!capable(CAP_NET_ADMIN))
+		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		if(dev->flags & IFF_UP)
+		if (dev->flags & IFF_UP)
 			return -EBUSY;
 
 		result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index e803a7dc6502..25c24f0368d8 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -612,7 +612,7 @@ ssize_t i2400m_bm_cmd(struct i2400m *i2400m,
 		goto error_wait_for_ack;
 	}
 	rx_bytes = result;
-	/* verify the ack and read more if neccessary [result is the
+	/* verify the ack and read more if necessary [result is the
 	 * final amount of bytes we get in the ack]  */
 	result = __i2400m_bm_ack_verify(i2400m, opcode, ack, ack_size, flags);
 	if (result < 0)
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 04df9bbe340f..820b128705ec 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -627,7 +627,7 @@ enum i2400m_bm_cmd_flags {
  * @I2400M_BRI_NO_REBOOT: Do not reboot the device and proceed
  *     directly to wait for a reboot barker from the device.
  * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot
- *     rom after reading the MAC adress. This is quite a dirty hack,
+ *     rom after reading the MAC address. This is quite a dirty hack,
  *     if you ask me -- the device requires the bootrom to be
  *     intialized after reading the MAC address.
  */
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 76a50ac02ebb..14f876b1358b 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -304,7 +304,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, but won't be
  * disconnected from the bus (so no reenumeration will
- * happen). Firmware upload will be neccessary.
+ * happen). Firmware upload will be necessary.
  *
  * The device will send a reboot barker that will trigger the driver
  * to reinitialize the state via __i2400m_dev_reset_handle.
@@ -314,7 +314,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, disconnected from the
  * bus an a reenumeration will happen. Firmware upload will be
- * neccessary. Thus, we don't do any locking or struct
+ * necessary. Thus, we don't do any locking or struct
  * reinitialization, as we are going to be fully disconnected and
  * reenumerated.
  *
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 98f4f8c5fb68..99f04c475898 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -246,7 +246,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, but won't be
  * disconnected from the USB bus (so no reenumeration will
- * happen). Firmware upload will be neccessary.
+ * happen). Firmware upload will be necessary.
  *
  * The device will send a reboot barker in the notification endpoint
  * that will trigger the driver to reinitialize the state
@@ -257,7 +257,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, disconnected from the
  * USB bus an a reenumeration will happen. Firmware upload will be
- * neccessary. Thus, we don't do any locking or struct
+ * necessary. Thus, we don't do any locking or struct
  * reinitialization, as we are going to be fully disconnected and
  * reenumerated.
  *
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 698d5672a070..dc5018a6d9ed 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5255,7 +5255,8 @@ static int set_wep_key(struct airo_info *ai, u16 index, const char *key,
 	WepKeyRid wkr;
 	int rc;
 
-	WARN_ON(keylen == 0);
+	if (WARN_ON(keylen == 0))
+		return -1;
 
 	memset(&wkr, 0, sizeof(wkr));
 	wkr.len = cpu_to_le16(sizeof(wkr));
diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index 8c8ce67971e9..dc662b76a1c8 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -166,6 +166,7 @@ struct ar9170 {
 	struct ath_common common;
 	struct mutex mutex;
 	enum ar9170_device_state state;
+	bool registered;
 	unsigned long bad_hw_nagger;
 
 	int (*open)(struct ar9170 *);
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index a6452af9c6c5..257c734733d1 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -2512,7 +2512,7 @@ void *ar9170_alloc(size_t priv_size)
 	/*
 	 * this buffer is used for rx stream reconstruction.
 	 * Under heavy load this device (or the transport layer?)
-	 * tends to split the streams into seperate rx descriptors.
+	 * tends to split the streams into separate rx descriptors.
 	 */
 
 	skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE, GFP_KERNEL);
@@ -2701,7 +2701,8 @@ int ar9170_register(struct ar9170 *ar, struct device *pdev)
 	dev_info(pdev, "Atheros AR9170 is registered as '%s'\n",
 		 wiphy_name(ar->hw->wiphy));
 
-	return err;
+	ar->registered = true;
+	return 0;
 
 err_unreg:
 	ieee80211_unregister_hw(ar->hw);
@@ -2712,11 +2713,14 @@ err_out:
 
 void ar9170_unregister(struct ar9170 *ar)
 {
+	if (ar->registered) {
 #ifdef CONFIG_AR9170_LEDS
-	ar9170_unregister_leds(ar);
+		ar9170_unregister_leds(ar);
 #endif /* CONFIG_AR9170_LEDS */
 
-	kfree_skb(ar->rx_failover);
 	ieee80211_unregister_hw(ar->hw);
+	}
+
+	kfree_skb(ar->rx_failover);
 	mutex_destroy(&ar->mutex);
 }
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index 0f361186b78f..4e30197afff6 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -582,43 +582,6 @@ static int ar9170_usb_upload(struct ar9170_usb *aru, const void *data,
 	return 0;
 }
 
-static int ar9170_usb_request_firmware(struct ar9170_usb *aru)
-{
-	int err = 0;
-
-	err = request_firmware(&aru->firmware, "ar9170.fw",
-			       &aru->udev->dev);
-	if (!err) {
-		aru->init_values = NULL;
-		return 0;
-	}
-
-	if (aru->req_one_stage_fw) {
-		dev_err(&aru->udev->dev, "ar9170.fw firmware file "
-			"not found and is required for this device\n");
-		return -EINVAL;
-	}
-
-	dev_err(&aru->udev->dev, "ar9170.fw firmware file "
-		"not found, trying old firmware...\n");
-
-	err = request_firmware(&aru->init_values, "ar9170-1.fw",
-			       &aru->udev->dev);
-	if (err) {
-		dev_err(&aru->udev->dev, "file with init values not found.\n");
-		return err;
-	}
-
-	err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev);
-	if (err) {
-		release_firmware(aru->init_values);
-		dev_err(&aru->udev->dev, "firmware file not found.\n");
-		return err;
-	}
-
-	return err;
-}
-
 static int ar9170_usb_reset(struct ar9170_usb *aru)
 {
 	int ret, lock = (aru->intf->condition != USB_INTERFACE_BINDING);
@@ -757,6 +720,103 @@ err_out:
 	return err;
 }
 
+static void ar9170_usb_firmware_failed(struct ar9170_usb *aru)
+{
+	struct device *parent = aru->udev->dev.parent;
+
+	/* unbind anything failed */
+	if (parent)
+		down(&parent->sem);
+	device_release_driver(&aru->udev->dev);
+	if (parent)
+		up(&parent->sem);
+}
+
+static void ar9170_usb_firmware_finish(const struct firmware *fw, void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	aru->firmware = fw;
+
+	if (!fw) {
+		dev_err(&aru->udev->dev, "firmware file not found.\n");
+		goto err_freefw;
+	}
+
+	err = ar9170_usb_init_device(aru);
+	if (err)
+		goto err_freefw;
+
+	err = ar9170_usb_open(&aru->common);
+	if (err)
+		goto err_unrx;
+
+	err = ar9170_register(&aru->common, &aru->udev->dev);
+
+	ar9170_usb_stop(&aru->common);
+	if (err)
+		goto err_unrx;
+
+	return;
+
+ err_unrx:
+	ar9170_usb_cancel_urbs(aru);
+
+ err_freefw:
+	ar9170_usb_firmware_failed(aru);
+}
+
+static void ar9170_usb_firmware_inits(const struct firmware *fw,
+				      void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	if (!fw) {
+		dev_err(&aru->udev->dev, "file with init values not found.\n");
+		ar9170_usb_firmware_failed(aru);
+		return;
+	}
+
+	aru->init_values = fw;
+
+	/* ok so we have the init values -- get code for two-stage */
+
+	err = request_firmware_nowait(THIS_MODULE, 1, "ar9170-2.fw",
+				      &aru->udev->dev, GFP_KERNEL, aru,
+				      ar9170_usb_firmware_finish);
+	if (err)
+		ar9170_usb_firmware_failed(aru);
+}
+
+static void ar9170_usb_firmware_step2(const struct firmware *fw, void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	if (fw) {
+		ar9170_usb_firmware_finish(fw, context);
+		return;
+	}
+
+	if (aru->req_one_stage_fw) {
+		dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+			"not found and is required for this device\n");
+		ar9170_usb_firmware_failed(aru);
+		return;
+	}
+
+	dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+		"not found, trying old firmware...\n");
+
+	err = request_firmware_nowait(THIS_MODULE, 1, "ar9170-1.fw",
+				      &aru->udev->dev, GFP_KERNEL, aru,
+				      ar9170_usb_firmware_inits);
+	if (err)
+		ar9170_usb_firmware_failed(aru);
+}
+
 static bool ar9170_requires_one_stage(const struct usb_device_id *id)
 {
 	if (!id->driver_info)
@@ -814,33 +874,9 @@ static int ar9170_usb_probe(struct usb_interface *intf,
 	if (err)
 		goto err_freehw;
 
-	err = ar9170_usb_request_firmware(aru);
-	if (err)
-		goto err_freehw;
-
-	err = ar9170_usb_init_device(aru);
-	if (err)
-		goto err_freefw;
-
-	err = ar9170_usb_open(ar);
-	if (err)
-		goto err_unrx;
-
-	err = ar9170_register(ar, &udev->dev);
-
-	ar9170_usb_stop(ar);
-	if (err)
-		goto err_unrx;
-
-	return 0;
-
-err_unrx:
-	ar9170_usb_cancel_urbs(aru);
-
-err_freefw:
-	release_firmware(aru->init_values);
-	release_firmware(aru->firmware);
-
+	return request_firmware_nowait(THIS_MODULE, 1, "ar9170.fw",
+				       &aru->udev->dev, GFP_KERNEL, aru,
+				       ar9170_usb_firmware_step2);
 err_freehw:
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(udev);
@@ -860,12 +896,12 @@ static void ar9170_usb_disconnect(struct usb_interface *intf)
 	ar9170_unregister(&aru->common);
 	ar9170_usb_cancel_urbs(aru);
 
-	release_firmware(aru->init_values);
-	release_firmware(aru->firmware);
-
 	usb_put_dev(aru->udev);
 	usb_set_intfdata(intf, NULL);
 	ieee80211_free_hw(aru->common.hw);
+
+	release_firmware(aru->init_values);
+	release_firmware(aru->firmware);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 6a3f4da7fb48..10b52262b232 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -429,8 +429,8 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
 			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
 
 		AR5K_EEPROM_READ(o++, val);
-		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
-		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+		ee->ee_i_cal[mode] = (val >> 5) & 0x3f;
+		ee->ee_q_cal[mode] = val & 0x1f;
 
 		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
 			AR5K_EEPROM_READ(o++, val);
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 72474c0ccaff..eff3323efb4b 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1386,38 +1386,39 @@ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah,
 		goto done;
 
 	/* Calibration has finished, get the results and re-run */
+
+	/* work around empty results which can apparently happen on 5212 */
 	for (i = 0; i <= 10; i++) {
 		iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
 		i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
 		q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
+		ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"iq_corr:%x i_pwr:%x q_pwr:%x", iq_corr, i_pwr, q_pwr);
+		if (i_pwr && q_pwr)
+			break;
 	}
 
 	i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7;
 	q_coffd = q_pwr >> 7;
 
-	/* No correction */
-	if (i_coffd == 0 || q_coffd == 0)
+	/* protect against divide by 0 and loss of sign bits */
+	if (i_coffd == 0 || q_coffd < 2)
 		goto done;
 
-	i_coff = ((-iq_corr) / i_coffd);
-
-	/* Boundary check */
-	if (i_coff > 31)
-		i_coff = 31;
-	if (i_coff < -32)
-		i_coff = -32;
+	i_coff = (-iq_corr) / i_coffd;
+	i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */
 
-	q_coff = (((s32)i_pwr / q_coffd) - 128);
+	q_coff = (i_pwr / q_coffd) - 128;
+	q_coff = clamp(q_coff, -16, 15); /* signed 5 bit */
 
-	/* Boundary check */
-	if (q_coff > 15)
-		q_coff = 15;
-	if (q_coff < -16)
-		q_coff = -16;
+	ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"new I:%d Q:%d (i_coffd:%x q_coffd:%x)",
+			i_coff, q_coff, i_coffd, q_coffd);
 
-	/* Commit new I/Q value */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE |
-		((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S));
+	/* Commit new I/Q values (set enable bit last to match HAL sources) */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF, i_coff);
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF, q_coff);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
 
 	/* Re-enable calibration -if we don't we'll commit
 	 * the same values again and again */
@@ -1873,7 +1874,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
 		break;
 	case AR5K_ANTMODE_FIXED_A:
 		def_ant = 1;
-		tx_ant = 0;
+		tx_ant = 1;
 		use_def_for_tx = true;
 		update_def_on_tx = false;
 		use_def_for_rts = true;
@@ -1882,7 +1883,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
 		break;
 	case AR5K_ANTMODE_FIXED_B:
 		def_ant = 2;
-		tx_ant = 0;
+		tx_ant = 2;
 		use_def_for_tx = true;
 		update_def_on_tx = false;
 		use_def_for_rts = true;
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 4cb9c5df9f46..1464f89b249c 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -2187,6 +2187,7 @@
  */
 #define	AR5K_PHY_IQ			0x9920			/* Register Address */
 #define	AR5K_PHY_IQ_CORR_Q_Q_COFF	0x0000001f	/* Mask for q correction info */
+#define	AR5K_PHY_IQ_CORR_Q_Q_COFF_S	0
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF	0x000007e0	/* Mask for i correction info */
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF_S	5
 #define	AR5K_PHY_IQ_CORR_ENABLE		0x00000800	/* Enable i/q correction */
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index a35a7db0fc4c..cbf28e379843 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -851,12 +851,15 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
 				AR5K_INIT_CYCRSSI_THR1);
 
-	/* I/Q correction
-	 * TODO: Per channel i/q infos ? */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-		AR5K_PHY_IQ_CORR_ENABLE |
-		(ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
-		ee->ee_q_cal[ee_mode]);
+	/* I/Q correction (set enable bit last to match HAL sources) */
+	/* TODO: Per channel i/q infos ? */
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF,
+			    ee->ee_i_cal[ee_mode]);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF,
+			    ee->ee_q_cal[ee_mode]);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
+	}
 
 	/* Heavy clipping -disable for now */
 	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
@@ -1379,11 +1382,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		ath5k_hw_set_sleep_clock(ah, true);
 
 	/*
-	 * Disable beacons and reset the register
+	 * Disable beacons and reset the TSF
 	 */
-	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
-			AR5K_BEACON_RESET_TSF);
-
+	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
+	ath5k_hw_reset_tsf(ah);
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index ac34a055c713..0e79e58cf4c9 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -1323,7 +1323,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
 
 static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 			    struct ieee80211_sta *sta, void *priv_sta,
-			    u32 changed)
+			    u32 changed, enum nl80211_channel_type oper_chan_type)
 {
 	struct ath_softc *sc = priv;
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
@@ -1340,8 +1340,8 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 		if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION)
 			return;
 
-		if (sc->hw->conf.channel_type == NL80211_CHAN_HT40MINUS ||
-		    sc->hw->conf.channel_type == NL80211_CHAN_HT40PLUS)
+		if (oper_chan_type == NL80211_CHAN_HT40MINUS ||
+		    oper_chan_type == NL80211_CHAN_HT40PLUS)
 			oper_cw40 = true;
 
 		oper_sgi40 = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 47294f90bbe5..b2c8207f7bc1 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2258,7 +2258,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an)
 		if (ATH_TXQ_SETUP(sc, i)) {
 			txq = &sc->tx.txq[i];
 
-			spin_lock(&txq->axq_lock);
+			spin_lock_bh(&txq->axq_lock);
 
 			list_for_each_entry_safe(ac,
 					ac_tmp, &txq->axq_acq, list) {
@@ -2279,7 +2279,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an)
 				}
 			}
 
-			spin_unlock(&txq->axq_lock);
+			spin_unlock_bh(&txq->axq_lock);
 		}
 	}
 }
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 63c2a7ade5fb..5c7aa1b1eb56 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -3177,14 +3177,27 @@ static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
 	int total_nr = 0;
 	int i;
 	struct pci_pool *pool;
-	u32 *virts[CB_NUMBER_OF_ELEMENTS_SMALL];
-	dma_addr_t phys[CB_NUMBER_OF_ELEMENTS_SMALL];
+	void **virts;
+	dma_addr_t *phys;
 
 	IPW_DEBUG_TRACE("<< : \n");
 
+	virts = kmalloc(sizeof(void *) * CB_NUMBER_OF_ELEMENTS_SMALL,
+			GFP_KERNEL);
+	if (!virts)
+		return -ENOMEM;
+
+	phys = kmalloc(sizeof(dma_addr_t) * CB_NUMBER_OF_ELEMENTS_SMALL,
+			GFP_KERNEL);
+	if (!phys) {
+		kfree(virts);
+		return -ENOMEM;
+	}
 	pool = pci_pool_create("ipw2200", priv->pci_dev, CB_MAX_LENGTH, 0, 0);
 	if (!pool) {
 		IPW_ERROR("pci_pool_create failed\n");
+		kfree(phys);
+		kfree(virts);
 		return -ENOMEM;
 	}
 
@@ -3254,6 +3267,8 @@ static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
 		pci_pool_free(pool, virts[i], phys[i]);
 
 	pci_pool_destroy(pool);
+	kfree(phys);
+	kfree(virts);
 
 	return ret;
 }
diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h
index bf45391172f3..a6d5e42647e4 100644
--- a/drivers/net/wireless/ipw2x00/libipw.h
+++ b/drivers/net/wireless/ipw2x00/libipw.h
@@ -797,7 +797,7 @@ struct libipw_device {
 	/* Probe / Beacon management */
 	struct list_head network_free_list;
 	struct list_head network_list;
-	struct libipw_network *networks;
+	struct libipw_network *networks[MAX_NETWORK_COUNT];
 	int scans;
 	int scan_age;
 
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index 1ae0b2b02c38..2fa55867bd8b 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -67,16 +67,17 @@ void *libipw_wiphy_privid = &libipw_wiphy_privid;
 
 static int libipw_networks_allocate(struct libipw_device *ieee)
 {
-	if (ieee->networks)
-		return 0;
-
-	ieee->networks =
-	    kzalloc(MAX_NETWORK_COUNT * sizeof(struct libipw_network),
-		    GFP_KERNEL);
-	if (!ieee->networks) {
-		printk(KERN_WARNING "%s: Out of memory allocating beacons\n",
-		       ieee->dev->name);
-		return -ENOMEM;
+	int i, j;
+
+	for (i = 0; i < MAX_NETWORK_COUNT; i++) {
+		ieee->networks[i] = kzalloc(sizeof(struct libipw_network),
+					    GFP_KERNEL);
+		if (!ieee->networks[i]) {
+			LIBIPW_ERROR("Out of memory allocating beacons\n");
+			for (j = 0; j < i; j++)
+				kfree(ieee->networks[j]);
+			return -ENOMEM;
+		}
 	}
 
 	return 0;
@@ -97,15 +98,11 @@ static inline void libipw_networks_free(struct libipw_device *ieee)
 {
 	int i;
 
-	if (!ieee->networks)
-		return;
-
-	for (i = 0; i < MAX_NETWORK_COUNT; i++)
-		if (ieee->networks[i].ibss_dfs)
-			kfree(ieee->networks[i].ibss_dfs);
-
-	kfree(ieee->networks);
-	ieee->networks = NULL;
+	for (i = 0; i < MAX_NETWORK_COUNT; i++) {
+		if (ieee->networks[i]->ibss_dfs)
+			kfree(ieee->networks[i]->ibss_dfs);
+		kfree(ieee->networks[i]);
+	}
 }
 
 void libipw_networks_age(struct libipw_device *ieee,
@@ -130,7 +127,7 @@ static void libipw_networks_initialize(struct libipw_device *ieee)
 	INIT_LIST_HEAD(&ieee->network_free_list);
 	INIT_LIST_HEAD(&ieee->network_list);
 	for (i = 0; i < MAX_NETWORK_COUNT; i++)
-		list_add_tail(&ieee->networks[i].list,
+		list_add_tail(&ieee->networks[i]->list,
 			      &ieee->network_free_list);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 303cc8193adc..e0678d921055 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -184,7 +184,7 @@ static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
 {
 	int idx;
 
-	for (idx = 0; idx < IWL_RATE_COUNT; idx++)
+	for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++)
 		if (iwl3945_rates[idx].plcp == plcp)
 			return idx;
 	return -1;
@@ -805,7 +805,7 @@ void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
 				  int sta_id, int tx_id)
 {
 	u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
-	u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT - 1);
+	u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945);
 	u16 rate_mask;
 	int rate;
 	u8 rts_retry_limit;
@@ -2146,7 +2146,7 @@ static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv)
 
 		/* fill in channel group's nominal powers for each rate */
 		for (rate_index = 0;
-		     rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) {
+		     rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
 			switch (rate_index) {
 			case IWL_RATE_36M_INDEX_TABLE:
 				if (i == 0)	/* B/G */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6aeb82b6992f..818367b57bab 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1463,59 +1463,66 @@ static void iwl_nic_start(struct iwl_priv *priv)
 }
 
 
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
+static int iwl_mac_setup_register(struct iwl_priv *priv);
+
+static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
+{
+	const char *name_pre = priv->cfg->fw_name_pre;
+
+	if (first)
+		priv->fw_index = priv->cfg->ucode_api_max;
+	else
+		priv->fw_index--;
+
+	if (priv->fw_index < priv->cfg->ucode_api_min) {
+		IWL_ERR(priv, "no suitable firmware found!\n");
+		return -ENOENT;
+	}
+
+	sprintf(priv->firmware_name, "%s%d%s",
+		name_pre, priv->fw_index, ".ucode");
+
+	IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
+		       priv->firmware_name);
+
+	return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
+				       &priv->pci_dev->dev, GFP_KERNEL, priv,
+				       iwl_ucode_callback);
+}
+
 /**
- * iwl_read_ucode - Read uCode images from disk file.
+ * iwl_ucode_callback - callback when firmware was loaded
  *
- * Copy into buffers for card to fetch via bus-mastering
+ * If loaded successfully, copies the firmware into buffers
+ * for the card to fetch (via DMA).
  */
-static int iwl_read_ucode(struct iwl_priv *priv)
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
 {
+	struct iwl_priv *priv = context;
 	struct iwl_ucode_header *ucode;
-	int ret = -EINVAL, index;
-	const struct firmware *ucode_raw;
-	const char *name_pre = priv->cfg->fw_name_pre;
 	const unsigned int api_max = priv->cfg->ucode_api_max;
 	const unsigned int api_min = priv->cfg->ucode_api_min;
-	char buf[25];
 	u8 *src;
 	size_t len;
 	u32 api_ver, build;
 	u32 inst_size, data_size, init_size, init_data_size, boot_size;
+	int err;
 	u16 eeprom_ver;
 
-	/* Ask kernel firmware_class module to get the boot firmware off disk.
-	 * request_firmware() is synchronous, file is in memory on return. */
-	for (index = api_max; index >= api_min; index--) {
-		sprintf(buf, "%s%d%s", name_pre, index, ".ucode");
-		ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
-		if (ret < 0) {
-			IWL_ERR(priv, "%s firmware file req failed: %d\n",
-				  buf, ret);
-			if (ret == -ENOENT)
-				continue;
-			else
-				goto error;
-		} else {
-			if (index < api_max)
-				IWL_ERR(priv, "Loaded firmware %s, "
-					"which is deprecated. "
-					"Please use API v%u instead.\n",
-					  buf, api_max);
-
-			IWL_DEBUG_INFO(priv, "Got firmware '%s' file (%zd bytes) from disk\n",
-				       buf, ucode_raw->size);
-			break;
-		}
+	if (!ucode_raw) {
+		IWL_ERR(priv, "request for firmware file '%s' failed.\n",
+			priv->firmware_name);
+		goto try_again;
 	}
 
-	if (ret < 0)
-		goto error;
+	IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
+		       priv->firmware_name, ucode_raw->size);
 
 	/* Make sure that we got at least the v1 header! */
 	if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
 		IWL_ERR(priv, "File size way too small!\n");
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Data from ucode file:  header followed by uCode images */
@@ -1540,10 +1547,9 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 		IWL_ERR(priv, "Driver unable to support your firmware API. "
 			  "Driver supports v%u, firmware is v%u.\n",
 			  api_max, api_ver);
-		priv->ucode_ver = 0;
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
+
 	if (api_ver != api_max)
 		IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
 			  "got v%u. New firmware can be obtained "
@@ -1585,6 +1591,12 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
 		       boot_size);
 
+	/*
+	 * For any of the failures below (before allocating pci memory)
+	 * we will try to load a version with a smaller API -- maybe the
+	 * user just got a corrupted version of the latest API.
+	 */
+
 	/* Verify size of file vs. image size info in file's header */
 	if (ucode_raw->size !=
 		priv->cfg->ops->ucode->get_header_size(api_ver) +
@@ -1594,41 +1606,35 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 		IWL_DEBUG_INFO(priv,
 			"uCode file size %d does not match expected size\n",
 			(int)ucode_raw->size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Verify that uCode images will fit in card's SRAM */
 	if (inst_size > priv->hw_params.max_inst_size) {
 		IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
 			       inst_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	if (data_size > priv->hw_params.max_data_size) {
 		IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
 				data_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (init_size > priv->hw_params.max_inst_size) {
 		IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
 			init_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (init_data_size > priv->hw_params.max_data_size) {
 		IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
 		      init_data_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (boot_size > priv->hw_params.max_bsm_size) {
 		IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
 			boot_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Allocate ucode buffers for card's bus-master loading ... */
@@ -1712,20 +1718,36 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
 	memcpy(priv->ucode_boot.v_addr, src, len);
 
+	/**************************************************
+	 * This is still part of probe() in a sense...
+	 *
+	 * 9. Setup and register with mac80211 and debugfs
+	 **************************************************/
+	err = iwl_mac_setup_register(priv);
+	if (err)
+		goto out_unbind;
+
+	err = iwl_dbgfs_register(priv, DRV_NAME);
+	if (err)
+		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+
 	/* We have our copies now, allow OS release its copies */
 	release_firmware(ucode_raw);
-	return 0;
+	return;
+
+ try_again:
+	/* try next, if any */
+	if (iwl_request_firmware(priv, false))
+		goto out_unbind;
+	release_firmware(ucode_raw);
+	return;
 
  err_pci_alloc:
 	IWL_ERR(priv, "failed to allocate pci memory\n");
-	ret = -ENOMEM;
 	iwl_dealloc_ucode_pci(priv);
-
- err_release:
+ out_unbind:
+	device_release_driver(&priv->pci_dev->dev);
 	release_firmware(ucode_raw);
-
- error:
-	return ret;
 }
 
 static const char *desc_lookup_text[] = {
@@ -2631,7 +2653,7 @@ static int iwl_mac_setup_register(struct iwl_priv *priv)
 	 */
 	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
-	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX + 1;
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
 	/* we create the 802.11 header and a zero-length SSID element */
 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
 
@@ -2667,21 +2689,7 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
 
 	/* we should be verifying the device is ready to be opened */
 	mutex_lock(&priv->mutex);
-
-	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
-	 * ucode filename and max sizes are card-specific. */
-
-	if (!priv->ucode_code.len) {
-		ret = iwl_read_ucode(priv);
-		if (ret) {
-			IWL_ERR(priv, "Could not read microcode: %d\n", ret);
-			mutex_unlock(&priv->mutex);
-			return ret;
-		}
-	}
-
 	ret = __iwl_up(priv);
-
 	mutex_unlock(&priv->mutex);
 
 	if (ret)
@@ -3654,17 +3662,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	iwl_power_initialize(priv);
 	iwl_tt_initialize(priv);
 
-	/**************************************************
-	 * 9. Setup and register with mac80211 and debugfs
-	 **************************************************/
-	err = iwl_mac_setup_register(priv);
+	err = iwl_request_firmware(priv, true);
 	if (err)
 		goto out_remove_sysfs;
 
-	err = iwl_dbgfs_register(priv, DRV_NAME);
-	if (err)
-		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
-
 	return 0;
 
  out_remove_sysfs:
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index ab891b958042..6054c5fba0c1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1132,6 +1132,7 @@ struct iwl_priv {
 	u8   rev_id;
 
 	/* uCode images, save to reload in case of failure */
+	int fw_index;			/* firmware we're trying to load */
 	u32 ucode_ver;			/* version of ucode, copy of
 					   iwl_ucode.ver */
 	struct fw_desc ucode_code;	/* runtime inst */
@@ -1142,6 +1143,7 @@ struct iwl_priv {
 	struct fw_desc ucode_boot;	/* bootstrap inst */
 	enum ucode_type ucode_type;
 	u8 ucode_write_complete;	/* the image write is complete */
+	char firmware_name[25];
 
 
 	struct iwl_rxon_time_cmd rxon_timing;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index dd9ff2ed645a..bd2f7c420563 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -638,20 +638,9 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
 	if (left < 0)
 		return 0;
 	*pos++ = WLAN_EID_SSID;
-	if (!priv->is_internal_short_scan &&
-	    priv->scan_request->n_ssids) {
-		struct cfg80211_ssid *ssid =
-			priv->scan_request->ssids;
-
-		/* Broadcast if ssid_len is 0 */
-		*pos++ = ssid->ssid_len;
-		memcpy(pos, ssid->ssid, ssid->ssid_len);
-		pos += ssid->ssid_len;
-		len += 2 + ssid->ssid_len;
-	} else {
-		*pos++ = 0;
-		len += 2;
-	}
+	*pos++ = 0;
+
+	len += 2;
 
 	if (WARN_ON(left < ie_len))
 		return len;
@@ -780,26 +769,20 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	if (priv->is_internal_short_scan) {
 		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
 	} else if (priv->scan_request->n_ssids) {
+		int i, p = 0;
 		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
-		/*
-		 * The first SSID to scan is stuffed into the probe request
-		 * template and the remaining ones are handled through the
-		 * direct_scan array.
-		 */
-		if (priv->scan_request->n_ssids > 1) {
-			int i, p = 0;
-			for (i = 1; i < priv->scan_request->n_ssids; i++) {
-				if (!priv->scan_request->ssids[i].ssid_len)
-					continue;
-				scan->direct_scan[p].id = WLAN_EID_SSID;
-				scan->direct_scan[p].len =
-					priv->scan_request->ssids[i].ssid_len;
-				memcpy(scan->direct_scan[p].ssid,
-				       priv->scan_request->ssids[i].ssid,
-				       priv->scan_request->ssids[i].ssid_len);
-				n_probes++;
-				p++;
-			}
+		for (i = 0; i < priv->scan_request->n_ssids; i++) {
+			/* always does wildcard anyway */
+			if (!priv->scan_request->ssids[i].ssid_len)
+				continue;
+			scan->direct_scan[p].id = WLAN_EID_SSID;
+			scan->direct_scan[p].len =
+				priv->scan_request->ssids[i].ssid_len;
+			memcpy(scan->direct_scan[p].ssid,
+			       priv->scan_request->ssids[i].ssid,
+			       priv->scan_request->ssids[i].ssid_len);
+			n_probes++;
+			p++;
 		}
 		is_active = true;
 	} else
diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h
index a3a79b5e2898..a855a99e49b8 100644
--- a/drivers/net/wireless/iwmc3200wifi/lmac.h
+++ b/drivers/net/wireless/iwmc3200wifi/lmac.h
@@ -262,7 +262,7 @@ struct iwm_ct_kill_cfg_cmd {
 
 /* Power Management */
 #define POWER_TABLE_CMD			0x77
-#define SAVE_RESTORE_ADRESS_CMD		0x78
+#define SAVE_RESTORE_ADDRESS_CMD		0x78
 #define REPLY_WATERMARK_CMD		0x79
 #define PM_DEBUG_STATISTIC_NOTIFIC	0x7B
 #define PD_FLUSH_N_NOTIFICATION		0x7C
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 9f6d6bf06b8e..2887047069f2 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1496,51 +1496,67 @@ static void set_multicast_list(struct usbnet *usbdev)
 {
 	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct dev_mc_list *mclist;
-	__le32 filter;
-	int ret, i, size;
-	char *buf;
+	__le32 filter, basefilter;
+	int ret;
+	char *mc_addrs = NULL;
+	int mc_count;
 
-	filter = RNDIS_PACKET_TYPE_DIRECTED | RNDIS_PACKET_TYPE_BROADCAST;
+	basefilter = filter = RNDIS_PACKET_TYPE_DIRECTED |
+			      RNDIS_PACKET_TYPE_BROADCAST;
 
-	netif_addr_lock_bh(usbdev->net);
 	if (usbdev->net->flags & IFF_PROMISC) {
 		filter |= RNDIS_PACKET_TYPE_PROMISCUOUS |
 			RNDIS_PACKET_TYPE_ALL_LOCAL;
-	} else if (usbdev->net->flags & IFF_ALLMULTI ||
-		   netdev_mc_count(usbdev->net) > priv->multicast_size) {
+	} else if (usbdev->net->flags & IFF_ALLMULTI) {
+		filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
+	}
+
+	if (filter != basefilter)
+		goto set_filter;
+
+	/*
+	 * mc_list should be accessed holding the lock, so copy addresses to
+	 * local buffer first.
+	 */
+	netif_addr_lock_bh(usbdev->net);
+	mc_count = netdev_mc_count(usbdev->net);
+	if (mc_count > priv->multicast_size) {
 		filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
-	} else if (!netdev_mc_empty(usbdev->net)) {
-		size = min(priv->multicast_size, netdev_mc_count(usbdev->net));
-		buf = kmalloc(size * ETH_ALEN, GFP_KERNEL);
-		if (!buf) {
+	} else if (mc_count) {
+		int i = 0;
+
+		mc_addrs = kmalloc(mc_count * ETH_ALEN, GFP_ATOMIC);
+		if (!mc_addrs) {
 			netdev_warn(usbdev->net,
 				    "couldn't alloc %d bytes of memory\n",
-				    size * ETH_ALEN);
+				    mc_count * ETH_ALEN);
 			netif_addr_unlock_bh(usbdev->net);
 			return;
 		}
 
-		i = 0;
-		netdev_for_each_mc_addr(mclist, usbdev->net) {
-			if (i == size)
-				break;
-			memcpy(buf + i++ * ETH_ALEN, mclist->dmi_addr, ETH_ALEN);
-		}
+		netdev_for_each_mc_addr(mclist, usbdev->net)
+			memcpy(mc_addrs + i++ * ETH_ALEN,
+			       mclist->dmi_addr, ETH_ALEN);
+	}
+	netif_addr_unlock_bh(usbdev->net);
 
-		ret = rndis_set_oid(usbdev, OID_802_3_MULTICAST_LIST, buf,
-								i * ETH_ALEN);
-		if (ret == 0 && i > 0)
+	if (filter != basefilter)
+		goto set_filter;
+
+	if (mc_count) {
+		ret = rndis_set_oid(usbdev, OID_802_3_MULTICAST_LIST, mc_addrs,
+				    mc_count * ETH_ALEN);
+		kfree(mc_addrs);
+		if (ret == 0)
 			filter |= RNDIS_PACKET_TYPE_MULTICAST;
 		else
 			filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
 
 		netdev_dbg(usbdev->net, "OID_802_3_MULTICAST_LIST(%d, max: %d) -> %d\n",
-			   i, priv->multicast_size, ret);
-
-		kfree(buf);
+			   mc_count, priv->multicast_size, ret);
 	}
-	netif_addr_unlock_bh(usbdev->net);
 
+set_filter:
 	ret = rndis_set_oid(usbdev, OID_GEN_CURRENT_PACKET_FILTER, &filter,
 							sizeof(filter));
 	if (ret < 0) {
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index ee34c137e7cd..9b04964deced 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -368,7 +368,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 
 		/*
 		 * The encryption key doesn't fit within the CSR cache,
-		 * this means we should allocate it seperately and use
+		 * this means we should allocate it separately and use
 		 * rt2x00usb_vendor_request() to send the key to the hardware.
 		 */
 		reg = KEY_ENTRY(key->hw_key_idx);
@@ -382,7 +382,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 		/*
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it demands the data to be provided
-		 * both seperately as well as inside the frame.
+		 * both separately as well as inside the frame.
 		 * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
 		 * to ensure rt2x00lib will not strip the data from the
 		 * frame after the copy, now we must tell mac80211
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index aca8c124f434..91cce2d0f6db 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1225,7 +1225,7 @@ MODULE_LICENSE("GPL");
 #ifdef CONFIG_RT2800PCI_SOC
 static int rt2800soc_probe(struct platform_device *pdev)
 {
-	return rt2x00soc_probe(pdev, rt2800pci_ops);
+	return rt2x00soc_probe(pdev, &rt2800pci_ops);
 }
 
 static struct platform_driver rt2800soc_driver = {
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5e4ee2023fcf..d27d7d5d850c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -99,7 +99,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
 	 * There are 2 variations of the rt2870 firmware.
 	 * a) size: 4kb
 	 * b) size: 8kb
-	 * Note that (b) contains 2 seperate firmware blobs of 4k
+	 * Note that (b) contains 2 separate firmware blobs of 4k
 	 * within the file. The first blob is the same firmware as (a),
 	 * but the second blob is for the additional chipsets.
 	 */
@@ -117,7 +117,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
 
 	/*
 	 * 8kb firmware files must be checked as if it were
-	 * 2 seperate firmware files.
+	 * 2 separate firmware files.
 	 */
 	while (offset < len) {
 		if (!rt2800usb_check_crc(data + offset, 4096))
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 70c04c282efc..28a1c46ec4eb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -109,7 +109,7 @@ struct rt2x00debug_intf {
 
 	/*
 	 * HW crypto statistics.
-	 * All statistics are stored seperately per cipher type.
+	 * All statistics are stored separately per cipher type.
 	 */
 	struct rt2x00debug_crypto crypto_stats[CIPHER_MAX];
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index b93731b79903..dd5ab8fe2321 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -394,7 +394,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Hardware might have stripped the IV/EIV/ICV data,
 	 * in that case it is possible that the data was
-	 * provided seperately (through hardware descriptor)
+	 * provided separately (through hardware descriptor)
 	 * in which case we should reinsert the data into the frame.
 	 */
 	if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 0b4801a14601..5b6b789cad3d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -497,7 +497,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
 	/*
 	 * When hardware encryption is supported, and this frame
 	 * is to be encrypted, we should strip the IV/EIV data from
-	 * the frame so we can provide it to the driver seperately.
+	 * the frame so we can provide it to the driver separately.
 	 */
 	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
 	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c
index 4efdc96010f6..111c0ff5c6c7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.c
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
@@ -112,6 +112,7 @@ exit_free_device:
 
 	return retval;
 }
+EXPORT_SYMBOL_GPL(rt2x00soc_probe);
 
 int rt2x00soc_remove(struct platform_device *pdev)
 {
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.h b/drivers/net/wireless/rt2x00/rt2x00soc.h
index 4739edfe2f00..474cbfc1efc7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.h
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.h
@@ -26,8 +26,6 @@
 #ifndef RT2X00SOC_H
 #define RT2X00SOC_H
 
-#define KSEG1ADDR(__ptr) __ptr
-
 /*
  * SoC driver handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index e2da928dd9f0..177472742172 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -476,7 +476,7 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index f39a8ed17841..290d70bc5d22 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -339,7 +339,7 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
@@ -439,7 +439,7 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
@@ -1661,7 +1661,7 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
 
 		/*
 		 * Hardware has stripped IV/EIV data from 802.11 frame during
-		 * decryption. It has provided the data seperately but rt2x00lib
+		 * decryption. It has provided the data separately but rt2x00lib
 		 * should decide if it should be reinserted.
 		 */
 		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
@@ -2352,6 +2352,8 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* CEIVA */
+	{ USB_DEVICE(0x178d, 0x02be), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* CNet */
 	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 2d555cc30508..00e09e26c826 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -350,7 +350,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
 	first_idx = info->status.rates[0].idx;
 	ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
 	retries = &zd_retry_rates[first_idx];
-	ZD_ASSERT(0<=retry && retry<=retries->count);
+	ZD_ASSERT(1 <= retry && retry <= retries->count);
 
 	info->status.rates[0].idx = retries->rate[0];
 	info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1);
@@ -360,7 +360,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
 		info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2);
 	}
 	for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) {
-		info->status.rates[i].idx = retries->rate[retry-1];
+		info->status.rates[i].idx = retries->rate[retry - 1];
 		info->status.rates[i].count = 1; // (success ? 1:2);
 	}
 	if (i<IEEE80211_TX_MAX_RATES)
@@ -374,7 +374,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
  * zd_mac_tx_failed - callback for failed frames
  * @dev: the mac80211 wireless device
  *
- * This function is called if a frame couldn't be successfully be
+ * This function is called if a frame couldn't be successfully
  * transferred. The first frame from the tx queue, will be selected and
  * reported as error to the upper layers.
  */
@@ -424,12 +424,10 @@ void zd_mac_tx_failed(struct urb *urb)
 		first_idx = info->status.rates[0].idx;
 		ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
 		retries = &zd_retry_rates[first_idx];
-		if (retry < 0 || retry > retries->count) {
+		if (retry <= 0 || retry > retries->count)
 			continue;
-		}
 
-		ZD_ASSERT(0<=retry && retry<=retries->count);
-		final_idx = retries->rate[retry-1];
+		final_idx = retries->rate[retry - 1];
 		final_rate = zd_rates[final_idx].hw_value;
 
 		if (final_rate != tx_status->rate) {
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 0bc5d474b168..1062b8ffe244 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -481,7 +481,7 @@ pdcspath_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops pdcspath_attr_ops = {
+static const struct sysfs_ops pdcspath_attr_ops = {
 	.show = pdcspath_attr_show,
 	.store = pdcspath_attr_store,
 };
diff --git a/drivers/parport/ChangeLog b/drivers/parport/ChangeLog
deleted file mode 100644
index 8565bbbeb6ec..000000000000
--- a/drivers/parport/ChangeLog
+++ /dev/null
@@ -1,583 +0,0 @@
-2001-10-11  Tim Waugh  <twaugh@redhat.com>
-	* parport_pc.c, parport_serial.c: Support for NetMos cards.
-	+ Patch originally from Michael Reinelt <reinelt@eunet.at>.
-
-2002-04-25  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c, parport_pc.c: Move some SIIG cards around.
-	Patch from Andrey Panin.
-
-2002-01-20  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio,
-	parport_pc_ecp_write_block_pio, parport_pc_ecp_read_block_pio):
-	Use the default implementations if the caller wants to use
-	O_NONBLOCK.
-
-2002-02-25  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Make sure that priv->ctr_writable includes IntEn
-	even if IRQ is given as a parameter.
-
-2002-01-21  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c: Apply patch from Max Vorobiev to make parport_daisy_select
-	work for ECP/EPP modes.
-
-2002-01-13  Niels Kristian Bech Jensen  <nkbj@image.dk>
-
-	* parport_pc.c: Change some occurrences of frob_set_mode to
-	ECR_WRITE.  This fixes PLIP.
-
-2002-01-04  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_claim_or_block): Sleep interruptibly to prevent
-	a possible deadlock.
-
-2001-12-07  Damian Gruszka  <damian.gruszka@VisionSystems.de>
-
-	* parport_pc.c (ECR_WRITE): Define.  If there are forbidden bits
-	in the ECR register for some chips, this will be a useful place to
-	put that knowledge.
-	(change_mode): Use ECR_WRITE.
-	(parport_pc_restore_state): Likewise.
-	(parport_ECPPS2_supported): Likewise.
-	(parport_ECPEPP_supported): Likewise.
-	(irq_probe_EPP): Likewise.
-	(programmable_irq_support): Likewise.
-	(programmable_dma_support): Likewise.
-	(parport_pc_probe_port): Likewise.
-
-	(frob_set_mode): New function.  Set the mode bits of the ECR.
-	(get_fifo_residue): Use frob_set_mode.
-	(parport_pc_ecpepp_read_data): Likewise.
-	(parport_pc_ecpepp_write_data): Likewise.
-	(parport_pc_ecpepp_read_addr): Likewise.
-	(parport_pc_ecpepp_write_addr): Likewise.
-	(parport_pc_compat_write_block_pio): Likewise.
-	(parport_pc_ecp_write_block_pio): Likewise.
-	(parport_ECR_present): Likewise.
-	(parport_ECP_supported): Likewise.
-	(parport_EPP_supported): Likewise.
-	(parport_ECPEPP_supported): Likewise.
-	(programmable_irq_support): Likewise.
-	(irq_probe_ECP): Likewise.
-	(programmable_dma_support): Likewise.
-
-	(parport_pc_enable_irq): Only enable interrupts if we know which
-	IRQ line they will come from.
-	(parport_pc_init_state): Set nErrIntrEn at initialisation.
-	(parport_pc_restore_state): Only write writable bits of CTR.
-	(parport_irq_probe): If no IRQ is found, take ackIntEn out of the
-	writable bit set.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_fifo_write_block_pio): Correct typo.
-	(parport_pc_init_state): Only set ackIntEn if we know which IRQ
-	line the interrupts will come from.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_epp_write_addr,
-	parport_ieee1284_epp_read_addr): Actually do something useful.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (dmaval): Don't use DMA by default.  It seems to be
-	too buggy at the moment.  Use 'dma=auto' to restore the previous
-	behaviour.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c (DEBUG): Undefine.
-
-2001-12-06  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_ecp_read_data): Mask off
-	PARPORT_CONTROL_AUTOFD as well.  Bug spotted by Joe
-	<joeja@mindspring.com>.
-
-2001-12-03  Rich Liu  <Rich.Liu@ite.com.tw>
-
-	* parport_pc.c (sio_ite_8872_probe): ITE8873 is a single-port
-	serial board, not a serial+parallel.
-
-2001-11-30  Niels Kristian Bech Jensen  <nkbj@image.dk>
-
-	* parport_pc.c: Fix compiler warning.
-
-2001-11-14  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_pci_probe): Hooks for PCI cards before
-	and after probing for ports.
-	* parport_serial.c (parport_register): Likewise.
-
-2001-11-12  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (init_module): Warn when parameters are ignored.
-
-2001-11-01  Damian Gruszka  <damian.gruszka@VisionSystems.de>
-
-	* parport_serial.c (serial_register): Set base_baud before
-	calling register_serial.
-
-2001-10-26  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_irq_probe): When ECR programmable IRQ
-	support fails, generate interrupts using the FIFO even if we don't
-	want to use the FIFO for real data transfers.
-	(parport_pc_probe_port): Display the ECR address if we have an
-	ECR, not just if we will use the FIFO.
-
-2001-10-24  Dave Strauss  <D.Strauss@motorola.com>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio,
-	parport_pc_ecp_write_block_pio): Allow a few seconds for an ECP
-	transfer to finish up.
-
-2001-10-11  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc (sio_ite_8872_probe): New function, submitted by Rich
-	Liu from ITE.  Cleaned up, removed bogus phys_to_virt calls.
-
-2001-10-24  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for AKS AladdinCARD.  Patch from
-	Aladdin Knowledge Systems (Christian Groessler).
-
-2001-10-24  Tim Waugh  <twaugh@redhat.com>
-	
-	* ieee1284_ops.c (parport_ieee1284_ecp_read_data): Try to minimise
-	turnaround time.
-
-	* ieee1284.c (parport_poll_peripheral): Try a couple of times
-	first without delaying.
-
-2001-10-10  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for OX16PCI954 PCI card.
-
-2001-10-10  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for OX12PCI840 PCI card (reported by
-	mk@daveg.com).  Lock-ups diagnosed by Ronnie Arosa (and now we
-	just don't trust its ECR).
-
-2001-10-10  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c: Support for AVLAB cards.
-
-2001-10-10  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (ecp_forward_to_reverse, ecp_reverse_to_forward):
-	Remember to retry direction switch if it fails.  Patch from David
-	Lambert.
-
-2001-10-08  David C. Hansen  <haveblue@us.ibm.com>
-
-	* share.c: Make driverlist_lock and parportlist_lock static.
-
-2001-10-08  Philip Blundell  <philb@gnu.org>
-
-	* parport_pc.c: New modular parameter verbose_logging.
-	Make port->modes indicate the modes that we are prepared to use,
-	rather than the modes that are available.
-
-2001-10-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_probe_port): Fix memory leak spotted by
-	Kipp Cannon.
-
-2001-10-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c: Remove NetMos support, since it causes problems
-	for some people.
-
-2001-08-30  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c (parport_serial_pci_probe): Clean-up on partial
-	registration failure.
-
-2001-08-14  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_init_superio): Allow for more than one
-	SuperIO device.  Patch from Rich Lio (ITE).
-
-2001-08-11  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for Titan Electronics cards.
-
-2001-08-08  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_unregister_device): Remove device from wait list
-	too.
-
-2001-06-20  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Make 'io_hi=0' work.
-
-2001-05-31  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c: New file.
-
-2001-06-05  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_unregister_port): New exported function.
-	Do the opposite of parport_pc_probe_port.
-	(cleanup_module): Use it.
-
-2001-05-22  Juan Quintela  <quintela@mandrakesoft.com>
-
-	* parport_amiga.c: Set printk levels.
-	* parport_gsc.c: Likewise.
-	* parport_mfc3.c: Likewise.
-	* parport_pc.c: Likewise.
-	* parport_sunbpp.c: Likewise.
-	* probe.c: Likewise.
-	* share.c: Likewise.
-
-2001-05-10  Fred Barnes  <frmb2@ukc.ac.uk>
-
-       * parport_pc.c (parport_pc_epp_read_data): added support for
-       reading from a w91284pic peripheral, flag is PARPORT_W91284PIC.
-
-2001-05-07  Fred Barnes  <frmb2@ukc.ac.uk>
- 
- 	* parport_pc.c (parport_pc_epp_read_data,
-	parport_pc_epp_write_data, parport_pc_epp_read_addr,
-	parport_pc_epp_write_addr): support for fast reads/writes using
-	the PARPORT_EPP_FAST flag.
- 
- 	* ieee1284.c (parport_read, parport_write): added code to handle
-	software EPP mode (IEEE1284_MODE_EPPSWE).  Added code to allow
-	BYTE mode reverse transfers (previously always went for NIBBLE
-	mode).
- 
- 	* ieee1284_ops.c (parport_ieee1284_epp_read_data,
-	parport_ieee1284_epp_write_data): fixed various polarity problems.
-	Also (theoretically) fixed address versions (.._addr), but no
-	hardware to test this on.
- 
- 	* parport_pc.h: added parport_dump_state() function for debugging.
- 	Needs to have DEBUG_PARPORT to be defined for it to be included.
- 
-2001-05-03  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Fix the compile problem I introduce from the last
-	change.
-
-2001-04-20  Paul Gortmaker  <p_gortmaker@yahoo.com>
-
-	* parport_pc.c: Cut down the size quite a bit (more than 4k off
-	the object, about 1k off the zImage) for the older non-PCI
-	machines which are typically resource starved anyway...
-
-2001-03-26  R Horn  <rjh@world.std.com>
-
-	* parport_pc.c: Some commentary changes.
-
-2001-04-19  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_probe_port): Remove __devinit
-	attribute.  Export unconditionally.
-
-2001-04-14  Jeff Garzik  <jgarzik@pobox.com>
-
-	Merged:  2001-03-30  Tim Waugh  <twaugh@redhat.com>
-
-        * drivers/parport/parport_pc.c: Make Via SuperIO chipsets behave
-        like everything else with respect to irq= and dma= parameters.
-
-2001-04-08  Tim Waugh  <twaugh@redhat.com>
-
-      * parport_pc.c (parport_pc_save_state): Read from the soft copy of
-      the control port.
-      (parport_pc_restore_state): Update the soft copy of the control
-      port.
-
-2001-03-26  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_find_number, parport_find_base): Trigger
-	a lowlevel driver load if there are no ports yet.
-
-2001-03-26  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_ECP_supported): Remove the IRQ conflict
-	check since it seems totally unreliable.
-
-2001-03-02  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_read_nibble): Reset nAutoFd
-	on timeout.  Matches 2.2.x behaviour.
-
-2001-03-02  Andrew Morton
-
-	* parport_pc.c (registered_parport): New static variable.
-	(parport_pc_find_ports): Set it when we register PCI driver.
-	(init_module): Unregister PCI driver if necessary when we
-	fail.
-
-2001-03-02  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_write_compat): Don't use
-	down_trylock to reset the IRQ count.  Don't even use sema_init,
-	because it's not even necessary to reset the count.  I can't
-	remember why we ever did.
-
-2001-01-04  Peter Osterlund  <peter.osterlund@mailbox.swipnet.se>
-
-	* ieee1284.c (parport_negotiate): Fix missing printk argument.
-
-2001-01-03  Paul Schleger  <Paul.Schleger@t-online.de>
-
-	* probe.c (parse_data): Get rid of trailing blanks in values.
-	Needed for XEROX XJ8C printer.
-
-2001-01-03  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_probe_port): Say something when probes
-	are omitted.
-
-2001-01-03  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (sio_via_686a_probe): Correct dma=255 fix.
-
-2000-11-21  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_ecp_write_block_pio): Fix
-	reverse-to-forward logic.  Spotted by Roland Kuck
-	<rci@cityweb.de>.
-
-2000-09-16  Cesar Eduardo Barros  <cesarb@nitnet.com.br>
-
-	* parport_pc.c (sio_via_686a_probe): Handle case
-	where hardware returns 255 for IRQ or DMA.
-
-2000-07-20  Eddie C. Dost  <ecd@skynet.be>
-
-	* share.c (attach_driver_chain): attach[i](port) needs to be
-	replaced by attach[count](port).
-
-2000-07-20  Eddie C. Dost  <ecd@skynet.be>
-
-	* daisy.c (add_dev): kmalloc args are in wrong order.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c: Documentation for parport_{get,port}_port,
-	parport_find_{number,base}.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_unregister_device): Remove unneeded locking
-	(test cad==dev).
-	(parport_claim): Likewise.
-	(parport_find_number): New function.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_register_port): Hold the parportlist_lock while
-	looking for a free parport number.
-	(parport_register_driver): Make sure that attach can block.
-	(attach_driver_chain): Likewise.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (call_driver_chain): Do reference counting things.
-	(parport_get_port): New function.
-	(parport_put_port): New function.
-	(parport_register_port): Initialise reference count to zero.
-	(parport_unregister_port): Check reference count rather than
-	driver list to see if we can free the port.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c: Clarifications in doc comments.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_unregister_port): Fix typo in comment.
-
-2000-07-11  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c: Support for the full range of Timedia cards.
-
-2000-07-08  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c: License block comments as part of parportbook.
-	* ieee1284.c: Likewise.
-	* share.c: Likewise.
-
-2000-06-30  Petr Vandrovec  <vandrove@vc.cvut.cz>
-
-	* procfs.c (do_hardware_modes): Generated string can be up to 34
-	chars long.
-
-2000-06-20  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio): Warn about
-	change_mode failures.
-	(parport_pc_ecp_write_block_pio): Likewise.
-	(parport_pc_ecp_read_block_pio): Likewise.
-
-2000-06-20  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (parport_SPP_supported): Warn more about possibly
-	incorrect parameters.
-
-2000-06-15  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_ECP_supported): Set PARPORT_MODE_COMPAT
-	for ECP ports, since they can all do hardware accelerated
-	compatibility mode (I assume).
-
-2000-06-13  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (cleanup_module): Remark about possible bugs.
-
-2000-06-13  Tim Waugh  <twaugh@redhat.com>
-
-	* procfs.c: Break 'hardware' out into separate files.
-
-2000-05-28  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* Fix PCI ID printk for non-superio PCI cards.
-
-2000-05-28  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (call_driver_chain): Get the driverlist_lock.
-	(parport_register_device): Make sure that port->devices always
-	looks consistent.
-	(parport_register_driver): Ensure that parport drivers are given
-	parameters that are valid for the duration of the callback by
-	locking the portlist against changes.
-	(parport_unregister_driver): Likewise.
-	(parport_claim): Don't overwrite flags.
-
-2000-05-28  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c (assign_addrs): Avoid double-probing daisy-chain devices
-	if the first probe succeeds.
-
-2000-05-16  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_claim): Fix SMP race.
-
-2000-05-15  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio): Check for
-	timeouts.
-	(parport_pc_ecp_write_block_pio): Likewise.
-	(parport_pc_ecp_read_block_pio): Likewise.
-
-2000-05-02  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c: PCI SYBA patch and verbose PCI detection.
-
-2000-05-02  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (decode_smsc): Fix SMSC 665/666 identification.
-
-2000-04-28  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284.c: Short function descriptions can't be multiline.
-
-	* daisy.c: Short function descriptions can't be multiline.
-
-2000-04-19  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_fifo_write_block_dma): Make maxlen
-	calculation a bit clearer.
-
-	* ieee1284.c (parport_negotiate): Turn on data line drivers.
-
-	* ieee1284_ops.c (parport_ieee1284_read_byte): Turn off data line
-	drivers.
-	(parport_ieee1284_write_compat): Turn on data line drivers.
-
-	* daisy.c (assign_addrs): Turn on data line drivers.
-	(cpp_mux): Likewise.
-	(cpp_daisy): Likewise.
-
-2000-04-04  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Add support for another PCI card.
-
-2000-04-04  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c: Documentation in kernel-doc format.
-
-	* ieee1284.c: Likewise.
-
-	* share.c: Likewise.
-
-2000-04-01  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_register_device): Need to hold the module
-	reference counts before sleeping.
-
-2000-03-27  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_ecp_read_block_pio): Correct operation
-	when peripheral is trying to send data when we stop listening.
-
-2000-03-22  Tim Waugh  <twaugh@redhat.com>
-
-	* init.c (parport_setup): Fix return value.
-
-2000-03-21  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_pci_probe): Fix return value; call
-	pci_enable_device.
-
-2000-03-16  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_ECP_supported): This seems to trigger on
-	machines that don't have an IRQ conflict; toned down the warning
-	message accordingly.
-
-2000-03-16  Gunther Mayer  <gunther.mayer@braunschweig.netsurf.de>
-
-	* parport_pc.c (show_parconfig_smsc37c669): Fix typo.
-	(decode_winbond): More IDs.
-	(winbond_check): Protect against false positives.
-	(winbond_check2): Likewise.
-	(smsc_check): Likewise.
-
-2000-03-15  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (cleanup_module): Don't call pci_unregister_driver
-	if we didn't call pci_register_driver first.
-
-2000-03-13  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_init): Moved from asm/parport.h.
-
-	* Config.in: CONFIG_PARPORT_PC_SUPERIO: new option.
-
-	* parport_pc.c (show_parconfig_smsc37c669): Make __devinit.
-	(show_parconfig_winbond): Likewise.
-	(decode_winbond): Likewise.
-	(decode_smsc): Likewise.
-	(winbond_check): Likewise.
-	(winbond_check2): Likewise.
-	(smsc_check): Likewise.
-	(detect_and_report_winbond): Likewise.
-	(detect_and_report_smsc): Likewise.
-	(get_superio_dma): Likewise.
-	(get_superio_irq): Likewise.
-	(parport_pc_find_isa_ports): New function.
-	(parport_pc_find_ports): New function.
-	(init_module): Make superio a config option, not a parameter.
-
-2000-03-10  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (decode_winbond): Use correct 83877ATF chip ID.
-	(decode_winbond): Fix typo.
-
-2000-03-09  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Integrate SuperIO PCI probe with normal PCI card
-	probe, so that the MODULE_DEVICE_TABLE is complete.
-
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 712250f5874a..26301cb25e7f 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -288,9 +288,9 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 			next = dev->bus_list.next;
 
 		/* Run device routines with the device locked */
-		down(&dev->dev.sem);
+		device_lock(&dev->dev);
 		retval = cb(dev, userdata);
-		up(&dev->dev.sem);
+		device_unlock(&dev->dev);
 		if (retval)
 			break;
 	}
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index cb2fd01eddae..b5dad9f37453 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -749,6 +749,24 @@ static int acpiphp_bus_trim(acpi_handle handle)
 	return retval;
 }
 
+static void acpiphp_set_acpi_region(struct acpiphp_slot *slot)
+{
+	struct acpiphp_func *func;
+	union acpi_object params[2];
+	struct acpi_object_list arg_list;
+
+	list_for_each_entry(func, &slot->funcs, sibling) {
+		arg_list.count = 2;
+		arg_list.pointer = params;
+		params[0].type = ACPI_TYPE_INTEGER;
+		params[0].integer.value = ACPI_ADR_SPACE_PCI_CONFIG;
+		params[1].type = ACPI_TYPE_INTEGER;
+		params[1].integer.value = 1;
+		/* _REG is optional, we don't care about if there is failure */
+		acpi_evaluate_object(func->handle, "_REG", &arg_list, NULL);
+	}
+}
+
 /**
  * enable_device - enable, configure a slot
  * @slot: slot to be enabled
@@ -805,6 +823,7 @@ static int __ref enable_device(struct acpiphp_slot *slot)
 	pci_bus_assign_resources(bus);
 	acpiphp_sanitize_bus(bus);
 	acpiphp_set_hpp_values(bus);
+	acpiphp_set_acpi_region(slot);
 	pci_enable_bridges(bus);
 	pci_bus_add_devices(bus);
 
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 6151389fd903..0a894efd4b9b 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -73,7 +73,7 @@ static void legacy_release(struct kobject *kobj)
 }
 
 static struct kobj_type legacy_ktype = {
-	.sysfs_ops = &(struct sysfs_ops){
+	.sysfs_ops = &(const struct sysfs_ops){
 		.store = legacy_store, .show = legacy_show
 	},
 	.release = &legacy_release,
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 807224ec8351..de296452c957 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -642,6 +642,7 @@ void pci_create_legacy_files(struct pci_bus *b)
 	if (!b->legacy_io)
 		goto kzalloc_err;
 
+	sysfs_bin_attr_init(b->legacy_io);
 	b->legacy_io->attr.name = "legacy_io";
 	b->legacy_io->size = 0xffff;
 	b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
@@ -654,6 +655,7 @@ void pci_create_legacy_files(struct pci_bus *b)
 		goto legacy_io_err;
 
 	/* Allocated above after the legacy_io struct */
+	sysfs_bin_attr_init(b->legacy_mem);
 	b->legacy_mem = b->legacy_io + 1;
 	b->legacy_mem->attr.name = "legacy_mem";
 	b->legacy_mem->size = 1024*1024;
@@ -800,6 +802,7 @@ static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
 	if (res_attr) {
 		char *res_attr_name = (char *)(res_attr + 1);
 
+		sysfs_bin_attr_init(res_attr);
 		if (write_combine) {
 			pdev->res_attr_wc[num] = res_attr;
 			sprintf(res_attr_name, "resource%d_wc", num);
@@ -972,6 +975,7 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev)
 		if (!attr)
 			return -ENOMEM;
 
+		sysfs_bin_attr_init(attr);
 		attr->size = dev->vpd->len;
 		attr->attr.name = "vpd";
 		attr->attr.mode = S_IRUSR | S_IWUSR;
@@ -1038,6 +1042,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 			retval = -ENOMEM;
 			goto err_resource_files;
 		}
+		sysfs_bin_attr_init(attr);
 		attr->size = rom_size;
 		attr->attr.name = "rom";
 		attr->attr.mode = S_IRUSR;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 77b493b3d97b..cb1dd5f4988c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1583,8 +1583,10 @@ void pci_pm_init(struct pci_dev *dev)
 	int pm;
 	u16 pmc;
 
+	pm_runtime_forbid(&dev->dev);
 	device_enable_async_suspend(&dev->dev);
 	dev->wakeup_prepared = false;
+
 	dev->pm_cap = 0;
 
 	/* find PCI PM capability in list */
@@ -2296,35 +2298,6 @@ void pci_msi_off(struct pci_dev *dev)
 	}
 }
 
-#ifndef HAVE_ARCH_PCI_SET_DMA_MASK
-/*
- * These can be overridden by arch-specific implementations
- */
-int
-pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (!pci_dma_supported(dev, mask))
-		return -EIO;
-
-	dev->dma_mask = mask;
-	dev_dbg(&dev->dev, "using %dbit DMA mask\n", fls64(mask));
-
-	return 0;
-}
-    
-int
-pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (!pci_dma_supported(dev, mask))
-		return -EIO;
-
-	dev->dev.coherent_dma_mask = mask;
-	dev_dbg(&dev->dev, "using %dbit consistent DMA mask\n", fls64(mask));
-
-	return 0;
-}
-#endif
-
 #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
 {
@@ -2486,7 +2459,7 @@ static int pci_dev_reset(struct pci_dev *dev, int probe)
 	if (!probe) {
 		pci_block_user_cfg_access(dev);
 		/* block PM suspend, driver probe, etc. */
-		down(&dev->dev.sem);
+		device_lock(&dev->dev);
 	}
 
 	rc = pci_dev_specific_reset(dev, probe);
@@ -2508,7 +2481,7 @@ static int pci_dev_reset(struct pci_dev *dev, int probe)
 	rc = pci_parent_bus_reset(dev, probe);
 done:
 	if (!probe) {
-		up(&dev->dev.sem);
+		device_unlock(&dev->dev);
 		pci_unblock_user_cfg_access(dev);
 	}
 
@@ -3066,8 +3039,6 @@ EXPORT_SYMBOL(pci_set_mwi);
 EXPORT_SYMBOL(pci_try_set_mwi);
 EXPORT_SYMBOL(pci_clear_mwi);
 EXPORT_SYMBOL_GPL(pci_intx);
-EXPORT_SYMBOL(pci_set_dma_mask);
-EXPORT_SYMBOL(pci_set_consistent_dma_mask);
 EXPORT_SYMBOL(pci_assign_resource);
 EXPORT_SYMBOL(pci_find_parent_resource);
 EXPORT_SYMBOL(pci_select_bars);
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 49c9e6c9779a..f75a44d37fbe 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -29,7 +29,7 @@ static ssize_t pci_slot_attr_store(struct kobject *kobj,
 	return attribute->store ? attribute->store(slot, buf, len) : -EIO;
 }
 
-static struct sysfs_ops pci_slot_sysfs_ops = {
+static const struct sysfs_ops pci_slot_sysfs_ops = {
 	.show = pci_slot_attr_show,
 	.store = pci_slot_attr_store,
 };
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 0f98be4450b7..ad93ebd7b2a2 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -971,9 +971,9 @@ static int runtime_suspend(struct device *dev)
 {
 	int rc;
 
-	down(&dev->sem);
+	device_lock(dev);
 	rc = pcmcia_dev_suspend(dev, PMSG_SUSPEND);
-	up(&dev->sem);
+	device_unlock(dev);
 	return rc;
 }
 
@@ -981,9 +981,9 @@ static int runtime_resume(struct device *dev)
 {
 	int rc;
 
-	down(&dev->sem);
+	device_lock(dev);
 	rc = pcmcia_dev_resume(dev);
-	up(&dev->sem);
+	device_unlock(dev);
 	return rc;
 }
 
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index de6bc333d299..db79ca61cf96 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -21,11 +21,18 @@
 
 #include "sa1111_generic.h"
 
+#define IDX_IRQ_S0_READY_NINT	(0)
+#define IDX_IRQ_S0_CD_VALID	(1)
+#define IDX_IRQ_S0_BVD1_STSCHG	(2)
+#define IDX_IRQ_S1_READY_NINT	(3)
+#define IDX_IRQ_S1_CD_VALID	(4)
+#define IDX_IRQ_S1_BVD1_STSCHG	(5)
+
 static struct pcmcia_irqs irqs[] = {
-	{ 0, IRQ_S0_CD_VALID,    "SA1111 PCMCIA card detect" },
-	{ 0, IRQ_S0_BVD1_STSCHG, "SA1111 PCMCIA BVD1"        },
-	{ 1, IRQ_S1_CD_VALID,    "SA1111 CF card detect"     },
-	{ 1, IRQ_S1_BVD1_STSCHG, "SA1111 CF BVD1"            },
+	{ 0, NO_IRQ, "SA1111 PCMCIA card detect" },
+	{ 0, NO_IRQ, "SA1111 PCMCIA BVD1"        },
+	{ 1, NO_IRQ, "SA1111 CF card detect"     },
+	{ 1, NO_IRQ, "SA1111 CF BVD1"            },
 };
 
 static int sa1111_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -136,7 +143,9 @@ int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops,
 		s->soc.ops = ops;
 		s->soc.socket.owner = ops->owner;
 		s->soc.socket.dev.parent = &dev->dev;
-		s->soc.socket.pci_irq = s->soc.nr ? IRQ_S1_READY_NINT : IRQ_S0_READY_NINT;
+		s->soc.socket.pci_irq = s->soc.nr ?
+				dev->irq[IDX_IRQ_S0_READY_NINT] :
+				dev->irq[IDX_IRQ_S1_READY_NINT];
 		s->dev = dev;
 
 		ret = add(&s->soc);
@@ -162,6 +171,12 @@ static int pcmcia_probe(struct sa1111_dev *dev)
 
 	base = dev->mapbase;
 
+	/* Initialize PCMCIA IRQs */
+	irqs[0].irq = dev->irq[IDX_IRQ_S0_CD_VALID];
+	irqs[1].irq = dev->irq[IDX_IRQ_S0_BVD1_STSCHG];
+	irqs[2].irq = dev->irq[IDX_IRQ_S1_CD_VALID];
+	irqs[3].irq = dev->irq[IDX_IRQ_S1_BVD1_STSCHG];
+
 	/*
 	 * Initialise the suspend state.
 	 */
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index cd2ee6fce1b4..e631dbeafd79 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -150,6 +150,7 @@ config MSI_LAPTOP
 	tristate "MSI Laptop Extras"
 	depends on ACPI
 	depends on BACKLIGHT_CLASS_DEVICE
+	depends on RFKILL
 	---help---
 	  This is a driver for laptops built by MSI (MICRO-STAR
 	  INTERNATIONAL):
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 1b1dddbd5744..bed764e3ea2a 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -142,7 +142,7 @@ static struct key_entry *dell_wmi_keymap = dell_legacy_wmi_keymap;
 
 static struct input_dev *dell_wmi_input_dev;
 
-static struct key_entry *dell_wmi_get_entry_by_scancode(int code)
+static struct key_entry *dell_wmi_get_entry_by_scancode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -153,7 +153,7 @@ static struct key_entry *dell_wmi_get_entry_by_scancode(int code)
 	return NULL;
 }
 
-static struct key_entry *dell_wmi_get_entry_by_keycode(int keycode)
+static struct key_entry *dell_wmi_get_entry_by_keycode(unsigned int keycode)
 {
 	struct key_entry *key;
 
@@ -164,8 +164,8 @@ static struct key_entry *dell_wmi_get_entry_by_keycode(int keycode)
 	return NULL;
 }
 
-static int dell_wmi_getkeycode(struct input_dev *dev, int scancode,
-			       int *keycode)
+static int dell_wmi_getkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int *keycode)
 {
 	struct key_entry *key = dell_wmi_get_entry_by_scancode(scancode);
 
@@ -177,13 +177,11 @@ static int dell_wmi_getkeycode(struct input_dev *dev, int scancode,
 	return -EINVAL;
 }
 
-static int dell_wmi_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int dell_wmi_setkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int keycode)
 {
 	struct key_entry *key;
-	int old_keycode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
+	unsigned int old_keycode;
 
 	key = dell_wmi_get_entry_by_scancode(scancode);
 	if (key && key->type == KE_KEY) {
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 3aa57da8b43b..56086363becc 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -57,7 +57,7 @@ enum hp_wmi_radio {
 	HPWMI_WWAN = 2,
 };
 
-static int __init hp_wmi_bios_setup(struct platform_device *device);
+static int __devinit hp_wmi_bios_setup(struct platform_device *device);
 static int __exit hp_wmi_bios_remove(struct platform_device *device);
 static int hp_wmi_resume_handler(struct device *device);
 
@@ -278,7 +278,7 @@ static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als);
 static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
 static DEVICE_ATTR(tablet, S_IRUGO, show_tablet, NULL);
 
-static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
+static struct key_entry *hp_wmi_get_entry_by_scancode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -289,7 +289,7 @@ static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
 	return NULL;
 }
 
-static struct key_entry *hp_wmi_get_entry_by_keycode(int keycode)
+static struct key_entry *hp_wmi_get_entry_by_keycode(unsigned int keycode)
 {
 	struct key_entry *key;
 
@@ -300,7 +300,8 @@ static struct key_entry *hp_wmi_get_entry_by_keycode(int keycode)
 	return NULL;
 }
 
-static int hp_wmi_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+static int hp_wmi_getkeycode(struct input_dev *dev,
+			     unsigned int scancode, unsigned int *keycode)
 {
 	struct key_entry *key = hp_wmi_get_entry_by_scancode(scancode);
 
@@ -312,13 +313,11 @@ static int hp_wmi_getkeycode(struct input_dev *dev, int scancode, int *keycode)
 	return -EINVAL;
 }
 
-static int hp_wmi_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int hp_wmi_setkeycode(struct input_dev *dev,
+			     unsigned int scancode, unsigned int keycode)
 {
 	struct key_entry *key;
-	int old_keycode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
+	unsigned int old_keycode;
 
 	key = hp_wmi_get_entry_by_scancode(scancode);
 	if (key && key->type == KE_KEY) {
@@ -447,7 +446,7 @@ static void cleanup_sysfs(struct platform_device *device)
 	device_remove_file(&device->dev, &dev_attr_tablet);
 }
 
-static int __init hp_wmi_bios_setup(struct platform_device *device)
+static int __devinit hp_wmi_bios_setup(struct platform_device *device)
 {
 	int err;
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index 759763d18e4c..c2b05da4289a 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -58,6 +58,7 @@
 #include <linux/dmi.h>
 #include <linux/backlight.h>
 #include <linux/platform_device.h>
+#include <linux/rfkill.h>
 
 #define MSI_DRIVER_VERSION "0.5"
 
@@ -66,6 +67,20 @@
 #define MSI_EC_COMMAND_WIRELESS 0x10
 #define MSI_EC_COMMAND_LCD_LEVEL 0x11
 
+#define MSI_STANDARD_EC_COMMAND_ADDRESS	0x2e
+#define MSI_STANDARD_EC_BLUETOOTH_MASK	(1 << 0)
+#define MSI_STANDARD_EC_WEBCAM_MASK	(1 << 1)
+#define MSI_STANDARD_EC_WLAN_MASK	(1 << 3)
+#define MSI_STANDARD_EC_3G_MASK		(1 << 4)
+
+/* For set SCM load flag to disable BIOS fn key */
+#define MSI_STANDARD_EC_SCM_LOAD_ADDRESS	0x2d
+#define MSI_STANDARD_EC_SCM_LOAD_MASK		(1 << 0)
+
+static int msi_laptop_resume(struct platform_device *device);
+
+#define MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS	0x2f
+
 static int force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
@@ -74,6 +89,23 @@ static int auto_brightness;
 module_param(auto_brightness, int, 0);
 MODULE_PARM_DESC(auto_brightness, "Enable automatic brightness control (0: disabled; 1: enabled; 2: don't touch)");
 
+static bool old_ec_model;
+static int wlan_s, bluetooth_s, threeg_s;
+static int threeg_exists;
+
+/* Some MSI 3G netbook only have one fn key to control Wlan/Bluetooth/3G,
+ * those netbook will load the SCM (windows app) to disable the original
+ * Wlan/Bluetooth control by BIOS when user press fn key, then control
+ * Wlan/Bluetooth/3G by SCM (software control by OS). Without SCM, user
+ * cann't on/off 3G module on those 3G netbook.
+ * On Linux, msi-laptop driver will do the same thing to disable the
+ * original BIOS control, then might need use HAL or other userland
+ * application to do the software control that simulate with SCM.
+ * e.g. MSI N034 netbook
+ */
+static bool load_scm_model;
+static struct rfkill *rfk_wlan, *rfk_bluetooth, *rfk_threeg;
+
 /* Hardware access */
 
 static int set_lcd_level(int level)
@@ -130,6 +162,35 @@ static int set_auto_brightness(int enable)
 	return ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, wdata, 2, NULL, 0, 1);
 }
 
+static ssize_t set_device_state(const char *buf, size_t count, u8 mask)
+{
+	int status;
+	u8 wdata = 0, rdata;
+	int result;
+
+	if (sscanf(buf, "%i", &status) != 1 || (status < 0 || status > 1))
+		return -EINVAL;
+
+	/* read current device state */
+	result = ec_read(MSI_STANDARD_EC_COMMAND_ADDRESS, &rdata);
+	if (result < 0)
+		return -EINVAL;
+
+	if (!!(rdata & mask) != status) {
+		/* reverse device bit */
+		if (rdata & mask)
+			wdata = rdata & ~mask;
+		else
+			wdata = rdata | mask;
+
+		result = ec_write(MSI_STANDARD_EC_COMMAND_ADDRESS, wdata);
+		if (result < 0)
+			return -EINVAL;
+	}
+
+	return count;
+}
+
 static int get_wireless_state(int *wlan, int *bluetooth)
 {
 	u8 wdata = 0, rdata;
@@ -148,6 +209,38 @@ static int get_wireless_state(int *wlan, int *bluetooth)
 	return 0;
 }
 
+static int get_wireless_state_ec_standard(void)
+{
+	u8 rdata;
+	int result;
+
+	result = ec_read(MSI_STANDARD_EC_COMMAND_ADDRESS, &rdata);
+	if (result < 0)
+		return -1;
+
+	wlan_s = !!(rdata & MSI_STANDARD_EC_WLAN_MASK);
+
+	bluetooth_s = !!(rdata & MSI_STANDARD_EC_BLUETOOTH_MASK);
+
+	threeg_s = !!(rdata & MSI_STANDARD_EC_3G_MASK);
+
+	return 0;
+}
+
+static int get_threeg_exists(void)
+{
+	u8 rdata;
+	int result;
+
+	result = ec_read(MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS, &rdata);
+	if (result < 0)
+		return -1;
+
+	threeg_exists = !!(rdata & MSI_STANDARD_EC_3G_MASK);
+
+	return 0;
+}
+
 /* Backlight device stuff */
 
 static int bl_get_brightness(struct backlight_device *b)
@@ -176,26 +269,71 @@ static ssize_t show_wlan(struct device *dev,
 
 	int ret, enabled;
 
-	ret = get_wireless_state(&enabled, NULL);
+	if (old_ec_model) {
+		ret = get_wireless_state(&enabled, NULL);
+	} else {
+		ret = get_wireless_state_ec_standard();
+		enabled = wlan_s;
+	}
 	if (ret < 0)
 		return ret;
 
 	return sprintf(buf, "%i\n", enabled);
 }
 
+static ssize_t store_wlan(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	return set_device_state(buf, count, MSI_STANDARD_EC_WLAN_MASK);
+}
+
 static ssize_t show_bluetooth(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
 
 	int ret, enabled;
 
-	ret = get_wireless_state(NULL, &enabled);
+	if (old_ec_model) {
+		ret = get_wireless_state(NULL, &enabled);
+	} else {
+		ret = get_wireless_state_ec_standard();
+		enabled = bluetooth_s;
+	}
 	if (ret < 0)
 		return ret;
 
 	return sprintf(buf, "%i\n", enabled);
 }
 
+static ssize_t store_bluetooth(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	return set_device_state(buf, count, MSI_STANDARD_EC_BLUETOOTH_MASK);
+}
+
+static ssize_t show_threeg(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+
+	int ret;
+
+	/* old msi ec not support 3G */
+	if (old_ec_model)
+		return -1;
+
+	ret = get_wireless_state_ec_standard();
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%i\n", threeg_s);
+}
+
+static ssize_t store_threeg(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	return set_device_state(buf, count, MSI_STANDARD_EC_3G_MASK);
+}
+
 static ssize_t show_lcd_level(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
@@ -258,6 +396,7 @@ static DEVICE_ATTR(lcd_level, 0644, show_lcd_level, store_lcd_level);
 static DEVICE_ATTR(auto_brightness, 0644, show_auto_brightness, store_auto_brightness);
 static DEVICE_ATTR(bluetooth, 0444, show_bluetooth, NULL);
 static DEVICE_ATTR(wlan, 0444, show_wlan, NULL);
+static DEVICE_ATTR(threeg, 0444, show_threeg, NULL);
 
 static struct attribute *msipf_attributes[] = {
 	&dev_attr_lcd_level.attr,
@@ -275,7 +414,8 @@ static struct platform_driver msipf_driver = {
 	.driver = {
 		.name = "msi-laptop-pf",
 		.owner = THIS_MODULE,
-	}
+	},
+	.resume = msi_laptop_resume,
 };
 
 static struct platform_device *msipf_device;
@@ -332,6 +472,192 @@ static struct dmi_system_id __initdata msi_dmi_table[] = {
 	{ }
 };
 
+static struct dmi_system_id __initdata msi_load_scm_models_dmi_table[] = {
+	{
+		.ident = "MSI N034",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR,
+				"MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MS-N034"),
+			DMI_MATCH(DMI_CHASSIS_VENDOR,
+			"MICRO-STAR INTERNATIONAL CO., LTD")
+		},
+		.callback = dmi_check_cb
+	},
+	{ }
+};
+
+static int rfkill_bluetooth_set(void *data, bool blocked)
+{
+	/* Do something with blocked...*/
+	/*
+	 * blocked == false is on
+	 * blocked == true is off
+	 */
+	if (blocked)
+		set_device_state("0", 0, MSI_STANDARD_EC_BLUETOOTH_MASK);
+	else
+		set_device_state("1", 0, MSI_STANDARD_EC_BLUETOOTH_MASK);
+
+	return 0;
+}
+
+static int rfkill_wlan_set(void *data, bool blocked)
+{
+	if (blocked)
+		set_device_state("0", 0, MSI_STANDARD_EC_WLAN_MASK);
+	else
+		set_device_state("1", 0, MSI_STANDARD_EC_WLAN_MASK);
+
+	return 0;
+}
+
+static int rfkill_threeg_set(void *data, bool blocked)
+{
+	if (blocked)
+		set_device_state("0", 0, MSI_STANDARD_EC_3G_MASK);
+	else
+		set_device_state("1", 0, MSI_STANDARD_EC_3G_MASK);
+
+	return 0;
+}
+
+static struct rfkill_ops rfkill_bluetooth_ops = {
+	.set_block = rfkill_bluetooth_set
+};
+
+static struct rfkill_ops rfkill_wlan_ops = {
+	.set_block = rfkill_wlan_set
+};
+
+static struct rfkill_ops rfkill_threeg_ops = {
+	.set_block = rfkill_threeg_set
+};
+
+static void rfkill_cleanup(void)
+{
+	if (rfk_bluetooth) {
+		rfkill_unregister(rfk_bluetooth);
+		rfkill_destroy(rfk_bluetooth);
+	}
+
+	if (rfk_threeg) {
+		rfkill_unregister(rfk_threeg);
+		rfkill_destroy(rfk_threeg);
+	}
+
+	if (rfk_wlan) {
+		rfkill_unregister(rfk_wlan);
+		rfkill_destroy(rfk_wlan);
+	}
+}
+
+static int rfkill_init(struct platform_device *sdev)
+{
+	/* add rfkill */
+	int retval;
+
+	rfk_bluetooth = rfkill_alloc("msi-bluetooth", &sdev->dev,
+				RFKILL_TYPE_BLUETOOTH,
+				&rfkill_bluetooth_ops, NULL);
+	if (!rfk_bluetooth) {
+		retval = -ENOMEM;
+		goto err_bluetooth;
+	}
+	retval = rfkill_register(rfk_bluetooth);
+	if (retval)
+		goto err_bluetooth;
+
+	rfk_wlan = rfkill_alloc("msi-wlan", &sdev->dev, RFKILL_TYPE_WLAN,
+				&rfkill_wlan_ops, NULL);
+	if (!rfk_wlan) {
+		retval = -ENOMEM;
+		goto err_wlan;
+	}
+	retval = rfkill_register(rfk_wlan);
+	if (retval)
+		goto err_wlan;
+
+	if (threeg_exists) {
+		rfk_threeg = rfkill_alloc("msi-threeg", &sdev->dev,
+				RFKILL_TYPE_WWAN, &rfkill_threeg_ops, NULL);
+		if (!rfk_threeg) {
+			retval = -ENOMEM;
+			goto err_threeg;
+		}
+		retval = rfkill_register(rfk_threeg);
+		if (retval)
+			goto err_threeg;
+	}
+
+	return 0;
+
+err_threeg:
+	rfkill_destroy(rfk_threeg);
+	if (rfk_wlan)
+		rfkill_unregister(rfk_wlan);
+err_wlan:
+	rfkill_destroy(rfk_wlan);
+	if (rfk_bluetooth)
+		rfkill_unregister(rfk_bluetooth);
+err_bluetooth:
+	rfkill_destroy(rfk_bluetooth);
+
+	return retval;
+}
+
+static int msi_laptop_resume(struct platform_device *device)
+{
+	u8 data;
+	int result;
+
+	if (!load_scm_model)
+		return 0;
+
+	/* set load SCM to disable hardware control by fn key */
+	result = ec_read(MSI_STANDARD_EC_SCM_LOAD_ADDRESS, &data);
+	if (result < 0)
+		return result;
+
+	result = ec_write(MSI_STANDARD_EC_SCM_LOAD_ADDRESS,
+		data | MSI_STANDARD_EC_SCM_LOAD_MASK);
+	if (result < 0)
+		return result;
+
+	return 0;
+}
+
+static int load_scm_model_init(struct platform_device *sdev)
+{
+	u8 data;
+	int result;
+
+	/* allow userland write sysfs file  */
+	dev_attr_bluetooth.store = store_bluetooth;
+	dev_attr_wlan.store = store_wlan;
+	dev_attr_threeg.store = store_threeg;
+	dev_attr_bluetooth.attr.mode |= S_IWUSR;
+	dev_attr_wlan.attr.mode |= S_IWUSR;
+	dev_attr_threeg.attr.mode |= S_IWUSR;
+
+	/* disable hardware control by fn key */
+	result = ec_read(MSI_STANDARD_EC_SCM_LOAD_ADDRESS, &data);
+	if (result < 0)
+		return result;
+
+	result = ec_write(MSI_STANDARD_EC_SCM_LOAD_ADDRESS,
+		data | MSI_STANDARD_EC_SCM_LOAD_MASK);
+	if (result < 0)
+		return result;
+
+	/* initial rfkill */
+	result = rfkill_init(sdev);
+	if (result < 0)
+		return result;
+
+	return 0;
+}
+
 static int __init msi_init(void)
 {
 	int ret;
@@ -339,8 +665,14 @@ static int __init msi_init(void)
 	if (acpi_disabled)
 		return -ENODEV;
 
-	if (!force && !dmi_check_system(msi_dmi_table))
-		return -ENODEV;
+	if (force || dmi_check_system(msi_dmi_table))
+		old_ec_model = 1;
+
+	if (!old_ec_model)
+		get_threeg_exists();
+
+	if (!old_ec_model && dmi_check_system(msi_load_scm_models_dmi_table))
+		load_scm_model = 1;
 
 	if (auto_brightness < 0 || auto_brightness > 2)
 		return -EINVAL;
@@ -374,10 +706,23 @@ static int __init msi_init(void)
 	if (ret)
 		goto fail_platform_device1;
 
+	if (load_scm_model && (load_scm_model_init(msipf_device) < 0)) {
+		ret = -EINVAL;
+		goto fail_platform_device1;
+	}
+
 	ret = sysfs_create_group(&msipf_device->dev.kobj, &msipf_attribute_group);
 	if (ret)
 		goto fail_platform_device2;
 
+	if (!old_ec_model) {
+		if (threeg_exists)
+			ret = device_create_file(&msipf_device->dev,
+						&dev_attr_threeg);
+		if (ret)
+			goto fail_platform_device2;
+	}
+
 	/* Disable automatic brightness control by default because
 	 * this module was probably loaded to do brightness control in
 	 * software. */
@@ -412,10 +757,14 @@ static void __exit msi_cleanup(void)
 {
 
 	sysfs_remove_group(&msipf_device->dev.kobj, &msipf_attribute_group);
+	if (!old_ec_model && threeg_exists)
+		device_remove_file(&msipf_device->dev, &dev_attr_threeg);
 	platform_device_unregister(msipf_device);
 	platform_driver_unregister(&msipf_driver);
 	backlight_device_unregister(msibl_device);
 
+	rfkill_cleanup();
+
 	/* Enable automatic brightness control again */
 	if (auto_brightness != 2)
 		set_auto_brightness(1);
@@ -435,3 +784,4 @@ MODULE_ALIAS("dmi:*:svnMICRO-STARINT'LCO.,LTD:pnMS-1013:pvr0131*:cvnMICRO-STARIN
 MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1058:pvr0581:rvnMSI:rnMS-1058:*:ct10:*");
 MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1412:*:rvnMSI:rnMS-1412:*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
 MODULE_ALIAS("dmi:*:svnNOTEBOOK:pnSAM2000:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
+MODULE_ALIAS("dmi:*:svnMICRO-STARINTERNATIONAL*:pnMS-N034:*");
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index fe7cf0188acc..c9fc479fc290 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -200,7 +200,7 @@ static struct acpi_driver acpi_pcc_driver = {
 };
 
 #define KEYMAP_SIZE		11
-static const int initial_keymap[KEYMAP_SIZE] = {
+static const unsigned int initial_keymap[KEYMAP_SIZE] = {
 	/*  0 */ KEY_RESERVED,
 	/*  1 */ KEY_BRIGHTNESSDOWN,
 	/*  2 */ KEY_BRIGHTNESSUP,
@@ -222,7 +222,7 @@ struct pcc_acpi {
 	struct acpi_device	*device;
 	struct input_dev	*input_dev;
 	struct backlight_device	*backlight;
-	int			keymap[KEYMAP_SIZE];
+	unsigned int		keymap[KEYMAP_SIZE];
 };
 
 struct pcc_keyinput {
@@ -445,7 +445,8 @@ static struct attribute_group pcc_attr_group = {
 
 /* hotkey input device driver */
 
-static int pcc_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+static int pcc_getkeycode(struct input_dev *dev,
+			  unsigned int scancode, unsigned int *keycode)
 {
 	struct pcc_acpi *pcc = input_get_drvdata(dev);
 
@@ -457,7 +458,7 @@ static int pcc_getkeycode(struct input_dev *dev, int scancode, int *keycode)
 	return 0;
 }
 
-static int keymap_get_by_keycode(struct pcc_acpi *pcc, int keycode)
+static int keymap_get_by_keycode(struct pcc_acpi *pcc, unsigned int keycode)
 {
 	int i;
 
@@ -469,7 +470,8 @@ static int keymap_get_by_keycode(struct pcc_acpi *pcc, int keycode)
 	return 0;
 }
 
-static int pcc_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int pcc_setkeycode(struct input_dev *dev,
+			  unsigned int scancode, unsigned int keycode)
 {
 	struct pcc_acpi *pcc = input_get_drvdata(dev);
 	int oldkeycode;
@@ -477,9 +479,6 @@ static int pcc_setkeycode(struct input_dev *dev, int scancode, int keycode)
 	if (scancode >= ARRAY_SIZE(pcc->keymap))
 		return -EINVAL;
 
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
 	oldkeycode = pcc->keymap[scancode];
 	pcc->keymap[scancode] = keycode;
 
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 3f71a605a492..5a3d8514c66d 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -145,7 +145,7 @@ struct sony_laptop_input_s {
 	struct input_dev	*key_dev;
 	struct kfifo		fifo;
 	spinlock_t		fifo_lock;
-	struct workqueue_struct	*wq;
+	struct timer_list	release_key_timer;
 };
 
 static struct sony_laptop_input_s sony_laptop_input = {
@@ -299,20 +299,26 @@ static int sony_laptop_input_keycode_map[] = {
 };
 
 /* release buttons after a short delay if pressed */
-static void do_sony_laptop_release_key(struct work_struct *work)
+static void do_sony_laptop_release_key(unsigned long unused)
 {
 	struct sony_laptop_keypress kp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sony_laptop_input.fifo_lock, flags);
 
-	while (kfifo_out_locked(&sony_laptop_input.fifo, (unsigned char *)&kp,
-			sizeof(kp), &sony_laptop_input.fifo_lock)
-			== sizeof(kp)) {
-		msleep(10);
+	if (kfifo_out(&sony_laptop_input.fifo,
+		      (unsigned char *)&kp, sizeof(kp)) == sizeof(kp)) {
 		input_report_key(kp.dev, kp.key, 0);
 		input_sync(kp.dev);
 	}
+
+	/* If there is something in the fifo schedule next release. */
+	if (kfifo_len(&sony_laptop_input.fifo) != 0)
+		mod_timer(&sony_laptop_input.release_key_timer,
+			  jiffies + msecs_to_jiffies(10));
+
+	spin_unlock_irqrestore(&sony_laptop_input.fifo_lock, flags);
 }
-static DECLARE_WORK(sony_laptop_release_key_work,
-		do_sony_laptop_release_key);
 
 /* forward event to the input subsystem */
 static void sony_laptop_report_input_event(u8 event)
@@ -366,13 +372,13 @@ static void sony_laptop_report_input_event(u8 event)
 		/* we emit the scancode so we can always remap the key */
 		input_event(kp.dev, EV_MSC, MSC_SCAN, event);
 		input_sync(kp.dev);
-		kfifo_in_locked(&sony_laptop_input.fifo,
-			  (unsigned char *)&kp, sizeof(kp),
-			  &sony_laptop_input.fifo_lock);
 
-		if (!work_pending(&sony_laptop_release_key_work))
-			queue_work(sony_laptop_input.wq,
-					&sony_laptop_release_key_work);
+		/* schedule key release */
+		kfifo_in_locked(&sony_laptop_input.fifo,
+				(unsigned char *)&kp, sizeof(kp),
+				&sony_laptop_input.fifo_lock);
+		mod_timer(&sony_laptop_input.release_key_timer,
+			  jiffies + msecs_to_jiffies(10));
 	} else
 		dprintk("unknown input event %.2x\n", event);
 }
@@ -390,27 +396,21 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device)
 
 	/* kfifo */
 	spin_lock_init(&sony_laptop_input.fifo_lock);
-	error =
-	 kfifo_alloc(&sony_laptop_input.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL);
+	error = kfifo_alloc(&sony_laptop_input.fifo,
+			    SONY_LAPTOP_BUF_SIZE, GFP_KERNEL);
 	if (error) {
 		printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n");
 		goto err_dec_users;
 	}
 
-	/* init workqueue */
-	sony_laptop_input.wq = create_singlethread_workqueue("sony-laptop");
-	if (!sony_laptop_input.wq) {
-		printk(KERN_ERR DRV_PFX
-				"Unable to create workqueue.\n");
-		error = -ENXIO;
-		goto err_free_kfifo;
-	}
+	setup_timer(&sony_laptop_input.release_key_timer,
+		    do_sony_laptop_release_key, 0);
 
 	/* input keys */
 	key_dev = input_allocate_device();
 	if (!key_dev) {
 		error = -ENOMEM;
-		goto err_destroy_wq;
+		goto err_free_kfifo;
 	}
 
 	key_dev->name = "Sony Vaio Keys";
@@ -419,18 +419,15 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device)
 	key_dev->dev.parent = &acpi_device->dev;
 
 	/* Initialize the Input Drivers: special keys */
-	set_bit(EV_KEY, key_dev->evbit);
-	set_bit(EV_MSC, key_dev->evbit);
-	set_bit(MSC_SCAN, key_dev->mscbit);
+	input_set_capability(key_dev, EV_MSC, MSC_SCAN);
+
+	__set_bit(EV_KEY, key_dev->evbit);
 	key_dev->keycodesize = sizeof(sony_laptop_input_keycode_map[0]);
 	key_dev->keycodemax = ARRAY_SIZE(sony_laptop_input_keycode_map);
 	key_dev->keycode = &sony_laptop_input_keycode_map;
-	for (i = 0; i < ARRAY_SIZE(sony_laptop_input_keycode_map); i++) {
-		if (sony_laptop_input_keycode_map[i] != KEY_RESERVED) {
-			set_bit(sony_laptop_input_keycode_map[i],
-				key_dev->keybit);
-		}
-	}
+	for (i = 0; i < ARRAY_SIZE(sony_laptop_input_keycode_map); i++)
+		__set_bit(sony_laptop_input_keycode_map[i], key_dev->keybit);
+	__clear_bit(KEY_RESERVED, key_dev->keybit);
 
 	error = input_register_device(key_dev);
 	if (error)
@@ -450,9 +447,8 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device)
 	jog_dev->id.vendor = PCI_VENDOR_ID_SONY;
 	key_dev->dev.parent = &acpi_device->dev;
 
-	jog_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
-	jog_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_MIDDLE);
-	jog_dev->relbit[0] = BIT_MASK(REL_WHEEL);
+	input_set_capability(jog_dev, EV_KEY, BTN_MIDDLE);
+	input_set_capability(jog_dev, EV_REL, REL_WHEEL);
 
 	error = input_register_device(jog_dev);
 	if (error)
@@ -473,9 +469,6 @@ err_unregister_keydev:
 err_free_keydev:
 	input_free_device(key_dev);
 
-err_destroy_wq:
-	destroy_workqueue(sony_laptop_input.wq);
-
 err_free_kfifo:
 	kfifo_free(&sony_laptop_input.fifo);
 
@@ -486,12 +479,23 @@ err_dec_users:
 
 static void sony_laptop_remove_input(void)
 {
-	/* cleanup only after the last user has gone */
+	struct sony_laptop_keypress kp = { NULL };
+
+	/* Cleanup only after the last user has gone */
 	if (!atomic_dec_and_test(&sony_laptop_input.users))
 		return;
 
-	/* flush workqueue first */
-	flush_workqueue(sony_laptop_input.wq);
+	del_timer_sync(&sony_laptop_input.release_key_timer);
+
+	/*
+	 * Generate key-up events for remaining keys. Note that we don't
+	 * need locking since nobody is adding new events to the kfifo.
+	 */
+	while (kfifo_out(&sony_laptop_input.fifo,
+			 (unsigned char *)&kp, sizeof(kp)) == sizeof(kp)) {
+		input_report_key(kp.dev, kp.key, 0);
+		input_sync(kp.dev);
+	}
 
 	/* destroy input devs */
 	input_unregister_device(sony_laptop_input.key_dev);
@@ -502,7 +506,6 @@ static void sony_laptop_remove_input(void)
 		sony_laptop_input.jog_dev = NULL;
 	}
 
-	destroy_workqueue(sony_laptop_input.wq);
 	kfifo_free(&sony_laptop_input.fifo);
 }
 
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index e7b0c3bcef89..c64e3528889b 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1668,7 +1668,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv)
  * Table of recommended minimum BIOS versions
  *
  * Reasons for listing:
- *    1. Stable BIOS, listed because the unknown ammount of
+ *    1. Stable BIOS, listed because the unknown amount of
  *       bugs and bad ACPI behaviour on older versions
  *
  *    2. BIOS or EC fw with known bugs that trigger on Linux
@@ -7108,7 +7108,7 @@ static struct ibm_struct volume_driver_data = {
  *
  * 	Fan speed changes of any sort (including those caused by the
  * 	disengaged mode) are usually done slowly by the firmware as the
- * 	maximum ammount of fan duty cycle change per second seems to be
+ * 	maximum amount of fan duty cycle change per second seems to be
  * 	limited.
  *
  * 	Reading is not available if GFAN exists.
diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c
index 02f3d4e9e666..4d6516fded7e 100644
--- a/drivers/platform/x86/topstar-laptop.c
+++ b/drivers/platform/x86/topstar-laptop.c
@@ -46,7 +46,7 @@ static struct tps_key_entry topstar_keymap[] = {
 	{ }
 };
 
-static struct tps_key_entry *tps_get_key_by_scancode(int code)
+static struct tps_key_entry *tps_get_key_by_scancode(unsigned int code)
 {
 	struct tps_key_entry *key;
 
@@ -57,7 +57,7 @@ static struct tps_key_entry *tps_get_key_by_scancode(int code)
 	return NULL;
 }
 
-static struct tps_key_entry *tps_get_key_by_keycode(int code)
+static struct tps_key_entry *tps_get_key_by_keycode(unsigned int code)
 {
 	struct tps_key_entry *key;
 
@@ -126,7 +126,8 @@ static int acpi_topstar_fncx_switch(struct acpi_device *device, bool state)
 	return 0;
 }
 
-static int topstar_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+static int topstar_getkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int *keycode)
 {
 	struct tps_key_entry *key = tps_get_key_by_scancode(scancode);
 
@@ -137,14 +138,12 @@ static int topstar_getkeycode(struct input_dev *dev, int scancode, int *keycode)
 	return 0;
 }
 
-static int topstar_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int topstar_setkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int keycode)
 {
 	struct tps_key_entry *key;
 	int old_keycode;
 
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
 	key = tps_get_key_by_scancode(scancode);
 
 	if (!key)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 405b969734d6..789240d1b577 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -745,7 +745,7 @@ static struct backlight_ops toshiba_backlight_data = {
         .update_status  = set_lcd_status,
 };
 
-static struct key_entry *toshiba_acpi_get_entry_by_scancode(int code)
+static struct key_entry *toshiba_acpi_get_entry_by_scancode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -756,7 +756,7 @@ static struct key_entry *toshiba_acpi_get_entry_by_scancode(int code)
 	return NULL;
 }
 
-static struct key_entry *toshiba_acpi_get_entry_by_keycode(int code)
+static struct key_entry *toshiba_acpi_get_entry_by_keycode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -767,8 +767,8 @@ static struct key_entry *toshiba_acpi_get_entry_by_keycode(int code)
 	return NULL;
 }
 
-static int toshiba_acpi_getkeycode(struct input_dev *dev, int scancode,
-				   int *keycode)
+static int toshiba_acpi_getkeycode(struct input_dev *dev,
+				   unsigned int scancode, unsigned int *keycode)
 {
 	struct key_entry *key = toshiba_acpi_get_entry_by_scancode(scancode);
 
@@ -780,14 +780,11 @@ static int toshiba_acpi_getkeycode(struct input_dev *dev, int scancode,
 	return -EINVAL;
 }
 
-static int toshiba_acpi_setkeycode(struct input_dev *dev, int scancode,
-				   int keycode)
+static int toshiba_acpi_setkeycode(struct input_dev *dev,
+				   unsigned int scancode, unsigned int keycode)
 {
 	struct key_entry *key;
-	int old_keycode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
+	unsigned int old_keycode;
 
 	key = toshiba_acpi_get_entry_by_scancode(scancode);
 	if (key && key->type == KE_KEY) {
diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h
index 0b8d14050efa..0bab84ebb15d 100644
--- a/drivers/pnp/base.h
+++ b/drivers/pnp/base.h
@@ -166,6 +166,9 @@ struct pnp_resource *pnp_add_io_resource(struct pnp_dev *dev,
 struct pnp_resource *pnp_add_mem_resource(struct pnp_dev *dev,
 					  resource_size_t start,
 					  resource_size_t end, int flags);
+struct pnp_resource *pnp_add_bus_resource(struct pnp_dev *dev,
+					  resource_size_t start,
+					  resource_size_t end);
 
 extern int pnp_debug;
 
diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c
index 68b0c04987e4..cfaf5b73540b 100644
--- a/drivers/pnp/interface.c
+++ b/drivers/pnp/interface.c
@@ -278,9 +278,12 @@ static ssize_t pnp_show_current_resources(struct device *dmdev,
 		switch (pnp_resource_type(res)) {
 		case IORESOURCE_IO:
 		case IORESOURCE_MEM:
-			pnp_printf(buffer, " %#llx-%#llx\n",
+		case IORESOURCE_BUS:
+			pnp_printf(buffer, " %#llx-%#llx%s\n",
 				   (unsigned long long) res->start,
-				   (unsigned long long) res->end);
+				   (unsigned long long) res->end,
+				   res->flags & IORESOURCE_WINDOW ?
+					" window" : "");
 			break;
 		case IORESOURCE_IRQ:
 		case IORESOURCE_DMA:
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 5702b2c8691f..54514aa35b09 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -177,7 +177,8 @@ static int dma_flags(struct pnp_dev *dev, int type, int bus_master,
 }
 
 static void pnpacpi_parse_allocated_ioresource(struct pnp_dev *dev, u64 start,
-					       u64 len, int io_decode)
+					       u64 len, int io_decode,
+					       int window)
 {
 	int flags = 0;
 	u64 end = start + len - 1;
@@ -186,6 +187,8 @@ static void pnpacpi_parse_allocated_ioresource(struct pnp_dev *dev, u64 start,
 		flags |= IORESOURCE_IO_16BIT_ADDR;
 	if (len == 0 || end >= 0x10003)
 		flags |= IORESOURCE_DISABLED;
+	if (window)
+		flags |= IORESOURCE_WINDOW;
 
 	pnp_add_io_resource(dev, start, end, flags);
 }
@@ -247,7 +250,7 @@ static void pnpacpi_parse_allocated_vendor(struct pnp_dev *dev,
 
 static void pnpacpi_parse_allocated_memresource(struct pnp_dev *dev,
 						u64 start, u64 len,
-						int write_protect)
+						int write_protect, int window)
 {
 	int flags = 0;
 	u64 end = start + len - 1;
@@ -256,15 +259,26 @@ static void pnpacpi_parse_allocated_memresource(struct pnp_dev *dev,
 		flags |= IORESOURCE_DISABLED;
 	if (write_protect == ACPI_READ_WRITE_MEMORY)
 		flags |= IORESOURCE_MEM_WRITEABLE;
+	if (window)
+		flags |= IORESOURCE_WINDOW;
 
 	pnp_add_mem_resource(dev, start, end, flags);
 }
 
+static void pnpacpi_parse_allocated_busresource(struct pnp_dev *dev,
+						u64 start, u64 len)
+{
+	u64 end = start + len - 1;
+
+	pnp_add_bus_resource(dev, start, end);
+}
+
 static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev,
 						  struct acpi_resource *res)
 {
 	struct acpi_resource_address64 addr, *p = &addr;
 	acpi_status status;
+	int window;
 
 	status = acpi_resource_to_address64(res, p);
 	if (!ACPI_SUCCESS(status)) {
@@ -273,37 +287,42 @@ static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev,
 		return;
 	}
 
-	if (p->producer_consumer == ACPI_PRODUCER)
-		return;
+	window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
 
 	if (p->resource_type == ACPI_MEMORY_RANGE)
 		pnpacpi_parse_allocated_memresource(dev,
 			p->minimum, p->address_length,
-			p->info.mem.write_protect);
+			p->info.mem.write_protect, window);
 	else if (p->resource_type == ACPI_IO_RANGE)
 		pnpacpi_parse_allocated_ioresource(dev,
 			p->minimum, p->address_length,
 			p->granularity == 0xfff ? ACPI_DECODE_10 :
-				ACPI_DECODE_16);
+				ACPI_DECODE_16, window);
+	else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
+		pnpacpi_parse_allocated_busresource(dev, p->minimum,
+						    p->address_length);
 }
 
 static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev,
 						      struct acpi_resource *res)
 {
 	struct acpi_resource_extended_address64 *p = &res->data.ext_address64;
+	int window;
 
-	if (p->producer_consumer == ACPI_PRODUCER)
-		return;
+	window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
 
 	if (p->resource_type == ACPI_MEMORY_RANGE)
 		pnpacpi_parse_allocated_memresource(dev,
 			p->minimum, p->address_length,
-			p->info.mem.write_protect);
+			p->info.mem.write_protect, window);
 	else if (p->resource_type == ACPI_IO_RANGE)
 		pnpacpi_parse_allocated_ioresource(dev,
 			p->minimum, p->address_length,
 			p->granularity == 0xfff ? ACPI_DECODE_10 :
-				ACPI_DECODE_16);
+				ACPI_DECODE_16, window);
+	else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
+		pnpacpi_parse_allocated_busresource(dev, p->minimum,
+						    p->address_length);
 }
 
 static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
@@ -368,7 +387,7 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 		pnpacpi_parse_allocated_ioresource(dev,
 			io->minimum,
 			io->address_length,
-			io->io_decode);
+			io->io_decode, 0);
 		break;
 
 	case ACPI_RESOURCE_TYPE_START_DEPENDENT:
@@ -380,7 +399,7 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 		pnpacpi_parse_allocated_ioresource(dev,
 			fixed_io->address,
 			fixed_io->address_length,
-			ACPI_DECODE_10);
+			ACPI_DECODE_10, 0);
 		break;
 
 	case ACPI_RESOURCE_TYPE_VENDOR:
@@ -396,21 +415,21 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 		pnpacpi_parse_allocated_memresource(dev,
 			memory24->minimum,
 			memory24->address_length,
-			memory24->write_protect);
+			memory24->write_protect, 0);
 		break;
 	case ACPI_RESOURCE_TYPE_MEMORY32:
 		memory32 = &res->data.memory32;
 		pnpacpi_parse_allocated_memresource(dev,
 			memory32->minimum,
 			memory32->address_length,
-			memory32->write_protect);
+			memory32->write_protect, 0);
 		break;
 	case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
 		fixed_memory32 = &res->data.fixed_memory32;
 		pnpacpi_parse_allocated_memresource(dev,
 			fixed_memory32->address,
 			fixed_memory32->address_length,
-			fixed_memory32->write_protect);
+			fixed_memory32->write_protect, 0);
 		break;
 	case ACPI_RESOURCE_TYPE_ADDRESS16:
 	case ACPI_RESOURCE_TYPE_ADDRESS32:
diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
index 64d0596bafb5..5b277dbaacde 100644
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
@@ -470,7 +470,8 @@ int pnp_check_dma(struct pnp_dev *dev, struct resource *res)
 unsigned long pnp_resource_type(struct resource *res)
 {
 	return res->flags & (IORESOURCE_IO  | IORESOURCE_MEM |
-			     IORESOURCE_IRQ | IORESOURCE_DMA);
+			     IORESOURCE_IRQ | IORESOURCE_DMA |
+			     IORESOURCE_BUS);
 }
 
 struct resource *pnp_get_resource(struct pnp_dev *dev,
@@ -590,6 +591,30 @@ struct pnp_resource *pnp_add_mem_resource(struct pnp_dev *dev,
 	return pnp_res;
 }
 
+struct pnp_resource *pnp_add_bus_resource(struct pnp_dev *dev,
+					  resource_size_t start,
+					  resource_size_t end)
+{
+	struct pnp_resource *pnp_res;
+	struct resource *res;
+
+	pnp_res = pnp_new_resource(dev);
+	if (!pnp_res) {
+		dev_err(&dev->dev, "can't add resource for BUS %#llx-%#llx\n",
+			(unsigned long long) start,
+			(unsigned long long) end);
+		return NULL;
+	}
+
+	res = &pnp_res->res;
+	res->flags = IORESOURCE_BUS;
+	res->start = start;
+	res->end = end;
+
+	pnp_dbg(&dev->dev, "  add %pr\n", res);
+	return pnp_res;
+}
+
 /*
  * Determine whether the specified resource is a possible configuration
  * for this device.
diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c
index 9585c1c1cc36..f5beb24d036a 100644
--- a/drivers/pnp/support.c
+++ b/drivers/pnp/support.c
@@ -69,8 +69,10 @@ char *pnp_resource_type_name(struct resource *res)
 		return "irq";
 	case IORESOURCE_DMA:
 		return "dma";
+	case IORESOURCE_BUS:
+		return "bus";
 	}
-	return NULL;
+	return "unknown";
 }
 
 void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc)
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index c790e0c77d4b..ff05e6189768 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(present),
 	POWER_SUPPLY_ATTR(online),
 	POWER_SUPPLY_ATTR(technology),
+	POWER_SUPPLY_ATTR(cycle_count),
 	POWER_SUPPLY_ATTR(voltage_max),
 	POWER_SUPPLY_ATTR(voltage_min),
 	POWER_SUPPLY_ATTR(voltage_max_design),
diff --git a/drivers/pps/Kconfig b/drivers/pps/Kconfig
index cc2eb8edb514..1afe4e03440f 100644
--- a/drivers/pps/Kconfig
+++ b/drivers/pps/Kconfig
@@ -30,4 +30,6 @@ config PPS_DEBUG
 	  messages to the system log.  Select this if you are having a
 	  problem with PPS support and want to see more of what is going on.
 
+source drivers/pps/clients/Kconfig
+
 endmenu
diff --git a/drivers/pps/Makefile b/drivers/pps/Makefile
index 19ea582f431d..98960ddd3188 100644
--- a/drivers/pps/Makefile
+++ b/drivers/pps/Makefile
@@ -4,5 +4,6 @@
 
 pps_core-y			:= pps.o kapi.o sysfs.o
 obj-$(CONFIG_PPS)		:= pps_core.o
+obj-y				+= clients/
 
 ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig
new file mode 100644
index 000000000000..4e801bd7254f
--- /dev/null
+++ b/drivers/pps/clients/Kconfig
@@ -0,0 +1,25 @@
+#
+# PPS clients configuration
+#
+
+if PPS
+
+comment "PPS clients support"
+
+config PPS_CLIENT_KTIMER
+	tristate "Kernel timer client (Testing client, use for debug)"
+	help
+	  If you say yes here you get support for a PPS debugging client
+	  which uses a kernel timer to generate the PPS signal.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called pps-ktimer.
+
+config PPS_CLIENT_LDISC
+	tristate "PPS line discipline"
+	depends on PPS
+	help
+	  If you say yes here you get support for a PPS source connected
+	  with the CD (Carrier Detect) pin of your serial port.
+
+endif
diff --git a/drivers/pps/clients/Makefile b/drivers/pps/clients/Makefile
new file mode 100644
index 000000000000..812c9b19b430
--- /dev/null
+++ b/drivers/pps/clients/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for PPS clients.
+#
+
+obj-$(CONFIG_PPS_CLIENT_KTIMER)	+= pps-ktimer.o
+obj-$(CONFIG_PPS_CLIENT_LDISC)	+= pps-ldisc.o
+
+ifeq ($(CONFIG_PPS_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/pps/clients/pps-ktimer.c b/drivers/pps/clients/pps-ktimer.c
new file mode 100644
index 000000000000..e7ef5b8186d0
--- /dev/null
+++ b/drivers/pps/clients/pps-ktimer.c
@@ -0,0 +1,123 @@
+/*
+ * pps-ktimer.c -- kernel timer test client
+ *
+ *
+ * Copyright (C) 2005-2006   Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/pps_kernel.h>
+
+/*
+ * Global variables
+ */
+
+static int source;
+static struct timer_list ktimer;
+
+/*
+ * The kernel timer
+ */
+
+static void pps_ktimer_event(unsigned long ptr)
+{
+	struct timespec __ts;
+	struct pps_ktime ts;
+
+	/* First of all we get the time stamp... */
+	getnstimeofday(&__ts);
+
+	pr_info("PPS event at %lu\n", jiffies);
+
+	/* ... and translate it to PPS time data struct */
+	ts.sec = __ts.tv_sec;
+	ts.nsec = __ts.tv_nsec;
+
+	pps_event(source, &ts, PPS_CAPTUREASSERT, NULL);
+
+	mod_timer(&ktimer, jiffies + HZ);
+}
+
+/*
+ * The echo function
+ */
+
+static void pps_ktimer_echo(int source, int event, void *data)
+{
+	pr_info("echo %s %s for source %d\n",
+		event & PPS_CAPTUREASSERT ? "assert" : "",
+		event & PPS_CAPTURECLEAR ? "clear" : "",
+		source);
+}
+
+/*
+ * The PPS info struct
+ */
+
+static struct pps_source_info pps_ktimer_info = {
+	.name		= "ktimer",
+	.path		= "",
+	.mode		= PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
+			  PPS_ECHOASSERT |
+			  PPS_CANWAIT | PPS_TSFMT_TSPEC,
+	.echo		= pps_ktimer_echo,
+	.owner		= THIS_MODULE,
+};
+
+/*
+ * Module staff
+ */
+
+static void __exit pps_ktimer_exit(void)
+{
+	del_timer_sync(&ktimer);
+	pps_unregister_source(source);
+
+	pr_info("ktimer PPS source unregistered\n");
+}
+
+static int __init pps_ktimer_init(void)
+{
+	int ret;
+
+	ret = pps_register_source(&pps_ktimer_info,
+				PPS_CAPTUREASSERT | PPS_OFFSETASSERT);
+	if (ret < 0) {
+		printk(KERN_ERR "cannot register ktimer source\n");
+		return ret;
+	}
+	source = ret;
+
+	setup_timer(&ktimer, pps_ktimer_event, 0);
+	mod_timer(&ktimer, jiffies + HZ);
+
+	pr_info("ktimer PPS source registered at %d\n", source);
+
+	return  0;
+}
+
+module_init(pps_ktimer_init);
+module_exit(pps_ktimer_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("dummy PPS source by using a kernel timer (just for debug)");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pps/clients/pps-ldisc.c b/drivers/pps/clients/pps-ldisc.c
new file mode 100644
index 000000000000..8e1932d29fd4
--- /dev/null
+++ b/drivers/pps/clients/pps-ldisc.c
@@ -0,0 +1,154 @@
+/*
+ * pps-ldisc.c -- PPS line discipline
+ *
+ *
+ * Copyright (C) 2008	Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/pps_kernel.h>
+
+#define PPS_TTY_MAGIC		0x0001
+
+static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status,
+				struct timespec *ts)
+{
+	int id = (long)tty->disc_data;
+	struct timespec __ts;
+	struct pps_ktime pps_ts;
+
+	/* First of all we get the time stamp... */
+	getnstimeofday(&__ts);
+
+	/* Does caller give us a timestamp? */
+	if (ts) {	/* Yes. Let's use it! */
+		pps_ts.sec = ts->tv_sec;
+		pps_ts.nsec = ts->tv_nsec;
+	} else {	/* No. Do it ourself! */
+		pps_ts.sec = __ts.tv_sec;
+		pps_ts.nsec = __ts.tv_nsec;
+	}
+
+	/* Now do the PPS event report */
+	pps_event(id, &pps_ts, status ? PPS_CAPTUREASSERT : PPS_CAPTURECLEAR,
+			NULL);
+
+	pr_debug("PPS %s at %lu on source #%d\n",
+			status ? "assert" : "clear", jiffies, id);
+}
+
+static int (*alias_n_tty_open)(struct tty_struct *tty);
+
+static int pps_tty_open(struct tty_struct *tty)
+{
+	struct pps_source_info info;
+	struct tty_driver *drv = tty->driver;
+	int index = tty->index + drv->name_base;
+	int ret;
+
+	info.owner = THIS_MODULE;
+	info.dev = NULL;
+	snprintf(info.name, PPS_MAX_NAME_LEN, "%s%d", drv->driver_name, index);
+	snprintf(info.path, PPS_MAX_NAME_LEN, "/dev/%s%d", drv->name, index);
+	info.mode = PPS_CAPTUREBOTH | \
+			PPS_OFFSETASSERT | PPS_OFFSETCLEAR | \
+			PPS_CANWAIT | PPS_TSFMT_TSPEC;
+
+	ret = pps_register_source(&info, PPS_CAPTUREBOTH | \
+				PPS_OFFSETASSERT | PPS_OFFSETCLEAR);
+	if (ret < 0) {
+		pr_err("cannot register PPS source \"%s\"\n", info.path);
+		return ret;
+	}
+	tty->disc_data = (void *)(long)ret;
+
+	/* Should open N_TTY ldisc too */
+	ret = alias_n_tty_open(tty);
+	if (ret < 0)
+		pps_unregister_source((long)tty->disc_data);
+
+	pr_info("PPS source #%d \"%s\" added\n", ret, info.path);
+
+	return 0;
+}
+
+static void (*alias_n_tty_close)(struct tty_struct *tty);
+
+static void pps_tty_close(struct tty_struct *tty)
+{
+	int id = (long)tty->disc_data;
+
+	pps_unregister_source(id);
+	alias_n_tty_close(tty);
+
+	pr_info("PPS source #%d removed\n", id);
+}
+
+static struct tty_ldisc_ops pps_ldisc_ops;
+
+/*
+ * Module stuff
+ */
+
+static int __init pps_tty_init(void)
+{
+	int err;
+
+	/* Inherit the N_TTY's ops */
+	n_tty_inherit_ops(&pps_ldisc_ops);
+
+	/* Save N_TTY's open()/close() methods */
+	alias_n_tty_open = pps_ldisc_ops.open;
+	alias_n_tty_close = pps_ldisc_ops.close;
+
+	/* Init PPS_TTY data */
+	pps_ldisc_ops.owner = THIS_MODULE;
+	pps_ldisc_ops.magic = PPS_TTY_MAGIC;
+	pps_ldisc_ops.name = "pps_tty";
+	pps_ldisc_ops.dcd_change = pps_tty_dcd_change;
+	pps_ldisc_ops.open = pps_tty_open;
+	pps_ldisc_ops.close = pps_tty_close;
+
+	err = tty_register_ldisc(N_PPS, &pps_ldisc_ops);
+	if (err)
+		pr_err("can't register PPS line discipline\n");
+	else
+		pr_info("PPS line discipline registered\n");
+
+	return err;
+}
+
+static void __exit pps_tty_cleanup(void)
+{
+	int err;
+
+	err = tty_unregister_ldisc(N_PPS);
+	if (err)
+		pr_err("can't unregister PPS line discipline\n");
+	else
+		pr_info("PPS line discipline removed\n");
+}
+
+module_init(pps_tty_init);
+module_exit(pps_tty_cleanup);
+
+MODULE_ALIAS_LDISC(N_PPS);
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("PPS TTY device driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/hctosys.c b/drivers/rtc/hctosys.c
index 33c0e98243ee..bc90b091f195 100644
--- a/drivers/rtc/hctosys.c
+++ b/drivers/rtc/hctosys.c
@@ -22,48 +22,57 @@
  * the best guess is to add 0.5s.
  */
 
+int rtc_hctosys_ret = -ENODEV;
+
 static int __init rtc_hctosys(void)
 {
-	int err;
+	int err = -ENODEV;
 	struct rtc_time tm;
+	struct timespec tv = {
+		.tv_nsec = NSEC_PER_SEC >> 1,
+	};
 	struct rtc_device *rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
 
 	if (rtc == NULL) {
-		printk("%s: unable to open rtc device (%s)\n",
+		pr_err("%s: unable to open rtc device (%s)\n",
 			__FILE__, CONFIG_RTC_HCTOSYS_DEVICE);
-		return -ENODEV;
+		goto err_open;
 	}
 
 	err = rtc_read_time(rtc, &tm);
-	if (err == 0) {
-		err = rtc_valid_tm(&tm);
-		if (err == 0) {
-			struct timespec tv;
+	if (err) {
+		dev_err(rtc->dev.parent,
+			"hctosys: unable to read the hardware clock\n");
+		goto err_read;
 
-			tv.tv_nsec = NSEC_PER_SEC >> 1;
+	}
 
-			rtc_tm_to_time(&tm, &tv.tv_sec);
+	err = rtc_valid_tm(&tm);
+	if (err) {
+		dev_err(rtc->dev.parent,
+			"hctosys: invalid date/time\n");
+		goto err_invalid;
+	}
 
-			do_settimeofday(&tv);
+	rtc_tm_to_time(&tm, &tv.tv_sec);
 
-			dev_info(rtc->dev.parent,
-				"setting system clock to "
-				"%d-%02d-%02d %02d:%02d:%02d UTC (%u)\n",
-				tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
-				tm.tm_hour, tm.tm_min, tm.tm_sec,
-				(unsigned int) tv.tv_sec);
-		}
-		else
-			dev_err(rtc->dev.parent,
-				"hctosys: invalid date/time\n");
-	}
-	else
-		dev_err(rtc->dev.parent,
-			"hctosys: unable to read the hardware clock\n");
+	do_settimeofday(&tv);
 
+	dev_info(rtc->dev.parent,
+		"setting system clock to "
+		"%d-%02d-%02d %02d:%02d:%02d UTC (%u)\n",
+		tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
+		tm.tm_hour, tm.tm_min, tm.tm_sec,
+		(unsigned int) tv.tv_sec);
+
+err_invalid:
+err_read:
 	rtc_class_close(rtc);
 
-	return 0;
+err_open:
+	rtc_hctosys_ret = err;
+
+	return err;
 }
 
 late_initcall(rtc_hctosys);
diff --git a/drivers/rtc/rtc-ds1742.c b/drivers/rtc/rtc-ds1742.c
index a1273360a44e..cad9ceb89baf 100644
--- a/drivers/rtc/rtc-ds1742.c
+++ b/drivers/rtc/rtc-ds1742.c
@@ -184,6 +184,7 @@ static int __devinit ds1742_rtc_probe(struct platform_device *pdev)
 	pdata->size_nvram = pdata->size - RTC_SIZE;
 	pdata->ioaddr_rtc = ioaddr + pdata->size_nvram;
 
+	sysfs_bin_attr_init(&pdata->nvram_attr);
 	pdata->nvram_attr.attr.name = "nvram";
 	pdata->nvram_attr.attr.mode = S_IRUGO | S_IWUSR;
 	pdata->nvram_attr.read = ds1742_nvram_read;
diff --git a/drivers/rtc/rtc-sysfs.c b/drivers/rtc/rtc-sysfs.c
index 7dd23a6fc825..380083ca572f 100644
--- a/drivers/rtc/rtc-sysfs.c
+++ b/drivers/rtc/rtc-sysfs.c
@@ -107,8 +107,9 @@ rtc_sysfs_show_hctosys(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
 #ifdef CONFIG_RTC_HCTOSYS_DEVICE
-	if (strcmp(dev_name(&to_rtc_device(dev)->dev),
-		   CONFIG_RTC_HCTOSYS_DEVICE) == 0)
+	if (rtc_hctosys_ret == 0 &&
+			strcmp(dev_name(&to_rtc_device(dev)->dev),
+				CONFIG_RTC_HCTOSYS_DEVICE) == 0)
 		return sprintf(buf, "1\n");
 	else
 #endif
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 4951aa82e9f5..bbea90baf98f 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -26,6 +26,7 @@
 #include <asm/ebcdic.h>
 #include <asm/idals.h>
 #include <asm/itcw.h>
+#include <asm/diag.h>
 
 /* This is ugly... */
 #define PRINTK_HEADER "dasd:"
@@ -2212,6 +2213,13 @@ static int dasd_open(struct block_device *bdev, fmode_t mode)
 		goto out;
 	}
 
+	if ((mode & FMODE_WRITE) &&
+	    (test_bit(DASD_FLAG_DEVICE_RO, &base->flags) ||
+	     (base->features & DASD_FEATURE_READONLY))) {
+		rc = -EROFS;
+		goto out;
+	}
+
 	return 0;
 
 out:
@@ -2289,6 +2297,34 @@ dasd_exit(void)
  * SECTION: common functions for ccw_driver use
  */
 
+/*
+ * Is the device read-only?
+ * Note that this function does not report the setting of the
+ * readonly device attribute, but how it is configured in z/VM.
+ */
+int dasd_device_is_ro(struct dasd_device *device)
+{
+	struct ccw_dev_id dev_id;
+	struct diag210 diag_data;
+	int rc;
+
+	if (!MACHINE_IS_VM)
+		return 0;
+	ccw_device_get_id(device->cdev, &dev_id);
+	memset(&diag_data, 0, sizeof(diag_data));
+	diag_data.vrdcdvno = dev_id.devno;
+	diag_data.vrdclen = sizeof(diag_data);
+	rc = diag210(&diag_data);
+	if (rc == 0 || rc == 2) {
+		return diag_data.vrdcvfla & 0x80;
+	} else {
+		DBF_EVENT(DBF_WARNING, "diag210 failed for dev=%04x with rc=%d",
+			  dev_id.devno, rc);
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(dasd_device_is_ro);
+
 static void dasd_generic_auto_online(void *data, async_cookie_t cookie)
 {
 	struct ccw_device *cdev = data;
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 44796ba4eb9b..51224f76b980 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -1045,6 +1045,10 @@ dasd_3990_erp_com_rej(struct dasd_ccw_req * erp, char *sense)
 
 		erp->retries = 5;
 
+	} else if (sense[1] & SNS1_WRITE_INHIBITED) {
+		dev_err(&device->cdev->dev, "An I/O request was rejected"
+			" because writing is inhibited\n");
+		erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
 	} else {
 		/* fatal error -  set status to FAILED
 		   internal error 09 - Command Reject */
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index d49766f3b940..8e23919c8704 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -742,6 +742,7 @@ dasd_ro_store(struct device *dev, struct device_attribute *attr,
 	      const char *buf, size_t count)
 {
 	struct dasd_devmap *devmap;
+	struct dasd_device *device;
 	int val;
 	char *endp;
 
@@ -758,12 +759,14 @@ dasd_ro_store(struct device *dev, struct device_attribute *attr,
 		devmap->features |= DASD_FEATURE_READONLY;
 	else
 		devmap->features &= ~DASD_FEATURE_READONLY;
-	if (devmap->device)
-		devmap->device->features = devmap->features;
-	if (devmap->device && devmap->device->block
-	    && devmap->device->block->gdp)
-		set_disk_ro(devmap->device->block->gdp, val);
+	device = devmap->device;
+	if (device) {
+		device->features = devmap->features;
+		val = val || test_bit(DASD_FLAG_DEVICE_RO, &device->flags);
+	}
 	spin_unlock(&dasd_devmap_lock);
+	if (device && device->block && device->block->gdp)
+		set_disk_ro(device->block->gdp, val);
 	return count;
 }
 
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 6e14863f5c70..687f323cdc38 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -145,12 +145,10 @@ dasd_diag_erp(struct dasd_device *device)
 	mdsk_term_io(device);
 	rc = mdsk_init_io(device, device->block->bp_block, 0, NULL);
 	if (rc == 4) {
-		if (!(device->features & DASD_FEATURE_READONLY)) {
+		if (!(test_and_set_bit(DASD_FLAG_DEVICE_RO, &device->flags)))
 			pr_warning("%s: The access mode of a DIAG device "
 				   "changed to read-only\n",
 				   dev_name(&device->cdev->dev));
-			device->features |= DASD_FEATURE_READONLY;
-		}
 		rc = 0;
 	}
 	if (rc)
@@ -449,7 +447,7 @@ dasd_diag_check_device(struct dasd_device *device)
 		rc = -EIO;
 	} else {
 		if (rc == 4)
-			device->features |= DASD_FEATURE_READONLY;
+			set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
 		pr_info("%s: New DASD with %ld byte/block, total size %ld "
 			"KB%s\n", dev_name(&device->cdev->dev),
 			(unsigned long) block->bp_block,
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 1cca21aafaba..01f4e7a34aa8 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1089,6 +1089,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 	struct dasd_eckd_private *private;
 	struct dasd_block *block;
 	int is_known, rc;
+	int readonly;
 
 	if (!ccw_device_is_pathgroup(device->cdev)) {
 		dev_warn(&device->cdev->dev,
@@ -1182,15 +1183,20 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 	else
 		private->real_cyl = private->rdc_data.no_cyl;
 
+	readonly = dasd_device_is_ro(device);
+	if (readonly)
+		set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
+
 	dev_info(&device->cdev->dev, "New DASD %04X/%02X (CU %04X/%02X) "
-		 "with %d cylinders, %d heads, %d sectors\n",
+		 "with %d cylinders, %d heads, %d sectors%s\n",
 		 private->rdc_data.dev_type,
 		 private->rdc_data.dev_model,
 		 private->rdc_data.cu_type,
 		 private->rdc_data.cu_model.model,
 		 private->real_cyl,
 		 private->rdc_data.trk_per_cyl,
-		 private->rdc_data.sec_per_trk);
+		 private->rdc_data.sec_per_trk,
+		 readonly ? ", read-only device" : "");
 	return 0;
 
 out_err3:
@@ -2839,8 +2845,13 @@ static int dasd_symm_io(struct dasd_device *device, void __user *argp)
 	char *psf_data, *rssd_result;
 	struct dasd_ccw_req *cqr;
 	struct ccw1 *ccw;
+	char psf0, psf1;
 	int rc;
 
+	if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
+		return -EACCES;
+	psf0 = psf1 = 0;
+
 	/* Copy parms from caller */
 	rc = -EFAULT;
 	if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
@@ -2869,12 +2880,8 @@ static int dasd_symm_io(struct dasd_device *device, void __user *argp)
 			   (void __user *)(unsigned long) usrparm.psf_data,
 			   usrparm.psf_data_len))
 		goto out_free;
-
-	/* sanity check on syscall header */
-	if (psf_data[0] != 0x17 && psf_data[1] != 0xce) {
-		rc = -EINVAL;
-		goto out_free;
-	}
+	psf0 = psf_data[0];
+	psf1 = psf_data[1];
 
 	/* setup CCWs for PSF + RSSD */
 	cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 2 , 0, device);
@@ -2925,7 +2932,9 @@ out_free:
 	kfree(rssd_result);
 	kfree(psf_data);
 out:
-	DBF_DEV_EVENT(DBF_WARNING, device, "Symmetrix ioctl: rc=%d", rc);
+	DBF_DEV_EVENT(DBF_WARNING, device,
+		      "Symmetrix ioctl (0x%02x 0x%02x): rc=%d",
+		      (int) psf0, (int) psf1, rc);
 	return rc;
 }
 
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index 0f152444ac77..37282b90eecc 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -124,6 +124,7 @@ dasd_fba_check_characteristics(struct dasd_device *device)
 	struct dasd_fba_private *private;
 	struct ccw_device *cdev = device->cdev;
 	int rc;
+	int readonly;
 
 	private = (struct dasd_fba_private *) device->private;
 	if (!private) {
@@ -162,16 +163,21 @@ dasd_fba_check_characteristics(struct dasd_device *device)
 		return rc;
 	}
 
+	readonly = dasd_device_is_ro(device);
+	if (readonly)
+		set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
+
 	dev_info(&device->cdev->dev,
 		 "New FBA DASD %04X/%02X (CU %04X/%02X) with %d MB "
-		 "and %d B/blk\n",
+		 "and %d B/blk%s\n",
 		 cdev->id.dev_type,
 		 cdev->id.dev_model,
 		 cdev->id.cu_type,
 		 cdev->id.cu_model,
 		 ((private->rdc_data.blk_bdsa *
 		   (private->rdc_data.blk_size >> 9)) >> 11),
-		 private->rdc_data.blk_size);
+		 private->rdc_data.blk_size,
+		 readonly ? ", read-only device" : "");
 	return 0;
 }
 
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index 94f92a1247f2..30a1ca3d08b7 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -70,7 +70,8 @@ int dasd_gendisk_alloc(struct dasd_block *block)
 	}
 	len += sprintf(gdp->disk_name + len, "%c", 'a'+(base->devindex%26));
 
-	if (block->base->features & DASD_FEATURE_READONLY)
+	if (base->features & DASD_FEATURE_READONLY ||
+	    test_bit(DASD_FLAG_DEVICE_RO, &base->flags))
 		set_disk_ro(gdp, 1);
 	gdp->private_data = block;
 	gdp->queue = block->request_queue;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index ed73ce550822..a91d4a97d4f2 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -436,6 +436,10 @@ struct dasd_block {
 #define DASD_FLAG_OFFLINE	3	/* device is in offline processing */
 #define DASD_FLAG_EER_SNSS	4	/* A SNSS is required */
 #define DASD_FLAG_EER_IN_USE	5	/* A SNSS request is running */
+#define DASD_FLAG_DEVICE_RO	6	/* The device itself is read-only. Don't
+					 * confuse this with the user specified
+					 * read-only feature.
+					 */
 
 void dasd_put_device_wake(struct dasd_device *);
 
@@ -609,6 +613,9 @@ char *dasd_get_sense(struct irb *);
 void dasd_device_set_stop_bits(struct dasd_device *, int);
 void dasd_device_remove_stop_bits(struct dasd_device *, int);
 
+int dasd_device_is_ro(struct dasd_device *);
+
+
 /* externals in dasd_devmap.c */
 extern int dasd_max_devindex;
 extern int dasd_probeonly;
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 7039d9cf0fb4..3479f8158a1b 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -199,7 +199,8 @@ dasd_ioctl_format(struct block_device *bdev, void __user *argp)
 	if (!argp)
 		return -EINVAL;
 
-	if (block->base->features & DASD_FEATURE_READONLY)
+	if (block->base->features & DASD_FEATURE_READONLY ||
+	    test_bit(DASD_FLAG_DEVICE_RO, &block->base->flags))
 		return -EROFS;
 	if (copy_from_user(&fdata, argp, sizeof(struct format_data_t)))
 		return -EFAULT;
@@ -349,7 +350,8 @@ dasd_ioctl_set_ro(struct block_device *bdev, void __user *argp)
 		return -EINVAL;
 	if (get_user(intval, (int __user *)argp))
 		return -EFAULT;
-
+	if (!intval && test_bit(DASD_FLAG_DEVICE_RO, &block->base->flags))
+		return -EROFS;
 	set_disk_ro(bdev->bd_disk, intval);
 	return dasd_set_feature(block->base->cdev, DASD_FEATURE_READONLY, intval);
 }
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 62ddf5202b79..2a4c566456e7 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -373,7 +373,7 @@ raw3270_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 		rq->rc = ccw_device_start(rp->cdev, &rq->ccw,
 					  (unsigned long) rq, 0, 0);
 		if (rq->rc == 0)
-			return;	/* Sucessfully restarted. */
+			return;	/* Successfully restarted. */
 		break;
 	case RAW3270_IO_STOP:
 		if (!rq)
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index ec88c59842e3..f6d72e1f2a38 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -196,7 +196,7 @@ __sclp_start_request(struct sclp_req *req)
 	req->start_count++;
 
 	if (rc == 0) {
-		/* Sucessfully started request */
+		/* Successfully started request */
 		req->status = SCLP_REQ_RUNNING;
 		sclp_running_state = sclp_running_state_running;
 		__sclp_set_request_timer(SCLP_RETRY_INTERVAL * HZ,
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index c6abb75c4615..6d229f3523a0 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -764,7 +764,7 @@ static void sch_create_and_recog_new_device(struct subchannel *sch)
 static void io_subchannel_register(struct ccw_device *cdev)
 {
 	struct subchannel *sch;
-	int ret;
+	int ret, adjust_init_count = 1;
 	unsigned long flags;
 
 	sch = to_subchannel(cdev->dev.parent);
@@ -793,6 +793,7 @@ static void io_subchannel_register(struct ccw_device *cdev)
 					      cdev->private->dev_id.ssid,
 					      cdev->private->dev_id.devno);
 		}
+		adjust_init_count = 0;
 		goto out;
 	}
 	/*
@@ -818,7 +819,7 @@ out:
 	cdev->private->flags.recog_done = 1;
 	wake_up(&cdev->private->wait_q);
 out_err:
-	if (atomic_dec_and_test(&ccw_device_init_count))
+	if (adjust_init_count && atomic_dec_and_test(&ccw_device_init_count))
 		wake_up(&ccw_device_init_wq);
 }
 
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index c94eb2a0fa2e..6ce83f56d537 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -33,7 +33,6 @@ void qdio_allocate_dbf(struct qdio_initialize *init_data,
 	DBF_HEX(&init_data->input_handler, sizeof(void *));
 	DBF_HEX(&init_data->output_handler, sizeof(void *));
 	DBF_HEX(&init_data->int_parm, sizeof(long));
-	DBF_HEX(&init_data->flags, sizeof(long));
 	DBF_HEX(&init_data->input_sbal_addr_array, sizeof(void *));
 	DBF_HEX(&init_data->output_sbal_addr_array, sizeof(void *));
 	DBF_EVENT("irq:%8lx", (unsigned long)irq_ptr);
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 232ef047ba34..4f8f74311778 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -588,10 +588,11 @@ static void qdio_kick_handler(struct qdio_q *q)
 	if (q->is_input_q) {
 		qperf_inc(q, inbound_handler);
 		DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "kih s:%02x c:%02x", start, count);
-	} else
+	} else {
 		qperf_inc(q, outbound_handler);
 		DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "koh: s:%02x c:%02x",
 			      start, count);
+	}
 
 	q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, start, count,
 		   q->irq_ptr->int_parm);
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index cb909a5b5047..977bb4d4ed15 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -43,6 +43,16 @@ config SMSGIUCV
 	  Select this option if you want to be able to receive SMSG messages
 	  from other VM guest systems.
 
+config SMSGIUCV_EVENT
+	tristate "Deliver IUCV special messages as uevents (VM only)"
+	depends on SMSGIUCV
+	help
+	  Select this option to deliver CP special messages (SMSGs) as
+	  uevents.  The driver handles only those special messages that
+	  start with "APP".
+
+	  To compile as a module, choose M. The module name is "smsgiucv_app".
+
 config CLAW
 	tristate "CLAW device support"
 	depends on CCW && NETDEVICES
diff --git a/drivers/s390/net/Makefile b/drivers/s390/net/Makefile
index 6cab5a62f99e..4dfe8c1092da 100644
--- a/drivers/s390/net/Makefile
+++ b/drivers/s390/net/Makefile
@@ -6,6 +6,7 @@ ctcm-y += ctcm_main.o ctcm_fsms.o ctcm_mpc.o ctcm_sysfs.o ctcm_dbug.o
 obj-$(CONFIG_CTCM) += ctcm.o fsm.o
 obj-$(CONFIG_NETIUCV) += netiucv.o fsm.o
 obj-$(CONFIG_SMSGIUCV) += smsgiucv.o
+obj-$(CONFIG_SMSGIUCV_EVENT) += smsgiucv_app.o
 obj-$(CONFIG_LCS) += lcs.o
 obj-$(CONFIG_CLAW) += claw.o
 qeth-y += qeth_core_sys.o qeth_core_main.o qeth_core_mpc.o
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index a3ac4456e0b1..fcd005aad989 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -763,7 +763,8 @@ static inline int qeth_get_micros(void)
 
 static inline int qeth_get_ip_version(struct sk_buff *skb)
 {
-	switch (skb->protocol) {
+	struct ethhdr *ehdr = (struct ethhdr *)skb->data;
+	switch (ehdr->h_proto) {
 	case ETH_P_IPV6:
 		return 6;
 	case ETH_P_IP:
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index fa8a519218ac..3bd4206f3470 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -537,7 +537,8 @@ static void qeth_send_control_data_cb(struct qeth_channel *channel,
 			dev_err(&card->gdev->dev,
 				"The qeth device is not configured "
 				"for the OSI layer required by z/VM\n");
-		qeth_schedule_recovery(card);
+		else
+			qeth_schedule_recovery(card);
 		goto out;
 	}
 
@@ -1113,8 +1114,6 @@ static int qeth_setup_card(struct qeth_card *card)
 	card->ipato.enabled = 0;
 	card->ipato.invert4 = 0;
 	card->ipato.invert6 = 0;
-	if (card->info.type == QETH_CARD_TYPE_IQD)
-		card->options.checksum_type = NO_CHECKSUMMING;
 	/* init QDIO stuff */
 	qeth_init_qdio_info(card);
 	return 0;
@@ -3805,9 +3804,6 @@ static int qeth_qdio_establish(struct qeth_card *card)
 	init_data.input_handler          = card->discipline.input_handler;
 	init_data.output_handler         = card->discipline.output_handler;
 	init_data.int_parm               = (unsigned long) card;
-	init_data.flags                  = QDIO_INBOUND_0COPY_SBALS |
-					   QDIO_OUTBOUND_0COPY_SBALS |
-					   QDIO_USE_OUTBOUND_PCIS;
 	init_data.input_sbal_addr_array  = (void **) in_sbal_ptrs;
 	init_data.output_sbal_addr_array = (void **) out_sbal_ptrs;
 
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index 88ae4357136a..25dfd5abd19b 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -8,6 +8,9 @@
  *		 Frank Blaschka <frank.blaschka@de.ibm.com>
  */
 
+#define KMSG_COMPONENT "qeth"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/list.h>
 #include <linux/rwsem.h>
 #include <asm/ebcdic.h>
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 51fde6f2e0b8..6f1e3036bafd 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -1071,11 +1071,9 @@ static int qeth_l2_recover(void *ptr)
 		dev_info(&card->gdev->dev,
 			"Device successfully recovered!\n");
 	else {
-		if (card->dev) {
-			rtnl_lock();
-			dev_close(card->dev);
-			rtnl_unlock();
-		}
+		rtnl_lock();
+		dev_close(card->dev);
+		rtnl_unlock();
 		dev_warn(&card->gdev->dev, "The qeth device driver "
 			"failed to recover an error on the device\n");
 	}
@@ -1129,11 +1127,9 @@ static int qeth_l2_pm_resume(struct ccwgroup_device *gdev)
 	if (card->state == CARD_STATE_RECOVER) {
 		rc = __qeth_l2_set_online(card->gdev, 1);
 		if (rc) {
-			if (card->dev) {
-				rtnl_lock();
-				dev_close(card->dev);
-				rtnl_unlock();
-			}
+			rtnl_lock();
+			dev_close(card->dev);
+			rtnl_unlock();
 		}
 	} else
 		rc = __qeth_l2_set_online(card->gdev, 0);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 5475834ab916..b3b6e872d806 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1691,39 +1691,43 @@ qeth_diags_trace_cb(struct qeth_card *card, struct qeth_reply *reply,
 
 	cmd = (struct qeth_ipa_cmd *)data;
 	rc = cmd->hdr.return_code;
-	if (rc) {
+	if (rc)
 		QETH_DBF_TEXT_(TRACE, 2, "dxter%x", rc);
-		if (cmd->data.diagass.action == QETH_DIAGS_CMD_TRACE_ENABLE) {
-			switch (rc) {
-			case IPA_RC_HARDWARE_AUTH_ERROR:
-				dev_warn(&card->gdev->dev, "The device is not "
-					"authorized to run as a HiperSockets "
-					"network traffic analyzer\n");
-				break;
-			case IPA_RC_TRACE_ALREADY_ACTIVE:
-				dev_warn(&card->gdev->dev, "A HiperSockets "
-					"network traffic analyzer is already "
-					"active in the HiperSockets LAN\n");
-				break;
-			default:
-				break;
-			}
-		}
-		return 0;
-	}
-
 	switch (cmd->data.diagass.action) {
 	case QETH_DIAGS_CMD_TRACE_QUERY:
 		break;
 	case QETH_DIAGS_CMD_TRACE_DISABLE:
-		card->info.promisc_mode = SET_PROMISC_MODE_OFF;
-		dev_info(&card->gdev->dev, "The HiperSockets network traffic "
-			"analyzer is deactivated\n");
+		switch (rc) {
+		case 0:
+		case IPA_RC_INVALID_SUBCMD:
+			card->info.promisc_mode = SET_PROMISC_MODE_OFF;
+			dev_info(&card->gdev->dev, "The HiperSockets network "
+				"traffic analyzer is deactivated\n");
+			break;
+		default:
+			break;
+		}
 		break;
 	case QETH_DIAGS_CMD_TRACE_ENABLE:
-		card->info.promisc_mode = SET_PROMISC_MODE_ON;
-		dev_info(&card->gdev->dev, "The HiperSockets network traffic "
-			"analyzer is activated\n");
+		switch (rc) {
+		case 0:
+			card->info.promisc_mode = SET_PROMISC_MODE_ON;
+			dev_info(&card->gdev->dev, "The HiperSockets network "
+				"traffic analyzer is activated\n");
+			break;
+		case IPA_RC_HARDWARE_AUTH_ERROR:
+			dev_warn(&card->gdev->dev, "The device is not "
+				"authorized to run as a HiperSockets network "
+				"traffic analyzer\n");
+			break;
+		case IPA_RC_TRACE_ALREADY_ACTIVE:
+			dev_warn(&card->gdev->dev, "A HiperSockets "
+				"network traffic analyzer is already "
+				"active in the HiperSockets LAN\n");
+			break;
+		default:
+			break;
+		}
 		break;
 	default:
 		QETH_DBF_MESSAGE(2, "Unknown sniffer action (0x%04x) on %s\n",
@@ -2215,11 +2219,9 @@ static int qeth_l3_stop_card(struct qeth_card *card, int recovery_mode)
 		if (recovery_mode)
 			qeth_l3_stop(card->dev);
 		else {
-			if (card->dev) {
-				rtnl_lock();
-				dev_close(card->dev);
-				rtnl_unlock();
-			}
+			rtnl_lock();
+			dev_close(card->dev);
+			rtnl_unlock();
 		}
 		if (!card->use_hard_stop) {
 			rc = qeth_send_stoplan(card);
@@ -2900,10 +2902,8 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int data_offset = -1;
 	int nr_frags;
 
-	if ((card->info.type == QETH_CARD_TYPE_IQD) &&
-	    (((skb->protocol != htons(ETH_P_IPV6)) &&
-	      (skb->protocol != htons(ETH_P_IP))) ||
-	     card->options.sniffer))
+	if (((card->info.type == QETH_CARD_TYPE_IQD) && (!ipv)) ||
+	     card->options.sniffer)
 			goto tx_drop;
 
 	if ((card->state != CARD_STATE_UP) || !card->lan_online) {
@@ -2949,14 +2949,14 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (data_offset < 0)
 			skb_pull(new_skb, ETH_HLEN);
 	} else {
-		if (new_skb->protocol == htons(ETH_P_IP)) {
+		if (ipv == 4) {
 			if (card->dev->type == ARPHRD_IEEE802_TR)
 				skb_pull(new_skb, TR_HLEN);
 			else
 				skb_pull(new_skb, ETH_HLEN);
 		}
 
-		if (new_skb->protocol == ETH_P_IPV6 && card->vlangrp &&
+		if (ipv == 6 && card->vlangrp &&
 				vlan_tx_tag_present(new_skb)) {
 			skb_push(new_skb, VLAN_HLEN);
 			skb_copy_to_linear_data(new_skb, new_skb->data + 4, 4);
@@ -3534,11 +3534,9 @@ static int qeth_l3_pm_resume(struct ccwgroup_device *gdev)
 	if (card->state == CARD_STATE_RECOVER) {
 		rc = __qeth_l3_set_online(card->gdev, 1);
 		if (rc) {
-			if (card->dev) {
-				rtnl_lock();
-				dev_close(card->dev);
-				rtnl_unlock();
-			}
+			rtnl_lock();
+			dev_close(card->dev);
+			rtnl_unlock();
 		}
 	} else
 		rc = __qeth_l3_set_online(card->gdev, 0);
diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c
index 67f2485d2372..ecef1edee701 100644
--- a/drivers/s390/net/smsgiucv.c
+++ b/drivers/s390/net/smsgiucv.c
@@ -31,9 +31,9 @@
 
 struct smsg_callback {
 	struct list_head list;
-	char *prefix;
+	const char *prefix;
 	int len;
-	void (*callback)(char *from, char *str);
+	void (*callback)(const char *from, char *str);
 };
 
 MODULE_AUTHOR
@@ -100,8 +100,8 @@ static void smsg_message_pending(struct iucv_path *path,
 	kfree(buffer);
 }
 
-int smsg_register_callback(char *prefix,
-			   void (*callback)(char *from, char *str))
+int smsg_register_callback(const char *prefix,
+			   void (*callback)(const char *from, char *str))
 {
 	struct smsg_callback *cb;
 
@@ -117,8 +117,9 @@ int smsg_register_callback(char *prefix,
 	return 0;
 }
 
-void smsg_unregister_callback(char *prefix,
-			      void (*callback)(char *from, char *str))
+void smsg_unregister_callback(const char *prefix,
+			      void (*callback)(const char *from,
+					       char *str))
 {
 	struct smsg_callback *cb, *tmp;
 
@@ -176,7 +177,7 @@ static const struct dev_pm_ops smsg_pm_ops = {
 
 static struct device_driver smsg_driver = {
 	.owner = THIS_MODULE,
-	.name = "SMSGIUCV",
+	.name = SMSGIUCV_DRV_NAME,
 	.bus  = &iucv_bus,
 	.pm = &smsg_pm_ops,
 };
diff --git a/drivers/s390/net/smsgiucv.h b/drivers/s390/net/smsgiucv.h
index 67f5d4f8378d..149a1151608d 100644
--- a/drivers/s390/net/smsgiucv.h
+++ b/drivers/s390/net/smsgiucv.h
@@ -5,6 +5,10 @@
  * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
  */
 
-int  smsg_register_callback(char *, void (*)(char *, char *));
-void smsg_unregister_callback(char *, void (*)(char *, char *));
+#define SMSGIUCV_DRV_NAME     "SMSGIUCV"
+
+int  smsg_register_callback(const char *,
+			    void (*)(const char *, char *));
+void smsg_unregister_callback(const char *,
+			      void (*)(const char *, char *));
 
diff --git a/drivers/s390/net/smsgiucv_app.c b/drivers/s390/net/smsgiucv_app.c
new file mode 100644
index 000000000000..91579dc6a2b0
--- /dev/null
+++ b/drivers/s390/net/smsgiucv_app.c
@@ -0,0 +1,211 @@
+/*
+ * Deliver z/VM CP special messages (SMSG) as uevents.
+ *
+ * The driver registers for z/VM CP special messages with the
+ * "APP" prefix. Incoming messages are delivered to user space
+ * as uevents.
+ *
+ * Copyright IBM Corp. 2010
+ * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+ *
+ */
+#define KMSG_COMPONENT		"smsgiucv_app"
+#define pr_fmt(fmt)		KMSG_COMPONENT ": " fmt
+
+#include <linux/ctype.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <net/iucv/iucv.h>
+#include "smsgiucv.h"
+
+/* prefix used for SMSG registration */
+#define SMSG_PREFIX		"APP"
+
+/* SMSG related uevent environment variables */
+#define ENV_SENDER_STR		"SMSG_SENDER="
+#define ENV_SENDER_LEN		(strlen(ENV_SENDER_STR) + 8 + 1)
+#define ENV_PREFIX_STR		"SMSG_ID="
+#define ENV_PREFIX_LEN		(strlen(ENV_PREFIX_STR) + \
+				 strlen(SMSG_PREFIX) + 1)
+#define ENV_TEXT_STR		"SMSG_TEXT="
+#define ENV_TEXT_LEN(msg)	(strlen(ENV_TEXT_STR) + strlen((msg)) + 1)
+
+/* z/VM user ID which is permitted to send SMSGs
+ * If the value is undefined or empty (""), special messages are
+ * accepted from any z/VM user ID. */
+static char *sender;
+module_param(sender, charp, 0400);
+MODULE_PARM_DESC(sender, "z/VM user ID from which CP SMSGs are accepted");
+
+/* SMSG device representation */
+static struct device *smsg_app_dev;
+
+/* list element for queuing received messages for delivery */
+struct smsg_app_event {
+	struct list_head list;
+	char *buf;
+	char *envp[4];
+};
+
+/* queue for outgoing uevents */
+static LIST_HEAD(smsg_event_queue);
+static DEFINE_SPINLOCK(smsg_event_queue_lock);
+
+static void smsg_app_event_free(struct smsg_app_event *ev)
+{
+	kfree(ev->buf);
+	kfree(ev);
+}
+
+static struct smsg_app_event *smsg_app_event_alloc(const char *from,
+						   const char *msg)
+{
+	struct smsg_app_event *ev;
+
+	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
+	if (!ev)
+		return NULL;
+
+	ev->buf = kzalloc(ENV_SENDER_LEN + ENV_PREFIX_LEN +
+			  ENV_TEXT_LEN(msg), GFP_ATOMIC);
+	if (!ev->buf) {
+		kfree(ev);
+		return NULL;
+	}
+
+	/* setting up environment pointers into buf */
+	ev->envp[0] = ev->buf;
+	ev->envp[1] = ev->envp[0] + ENV_SENDER_LEN;
+	ev->envp[2] = ev->envp[1] + ENV_PREFIX_LEN;
+	ev->envp[3] = NULL;
+
+	/* setting up environment: sender, prefix name, and message text */
+	snprintf(ev->envp[0], ENV_SENDER_LEN, ENV_SENDER_STR "%s", from);
+	snprintf(ev->envp[1], ENV_PREFIX_LEN, ENV_PREFIX_STR "%s", SMSG_PREFIX);
+	snprintf(ev->envp[2], ENV_TEXT_LEN(msg), ENV_TEXT_STR "%s", msg);
+
+	return ev;
+}
+
+static void smsg_event_work_fn(struct work_struct *work)
+{
+	LIST_HEAD(event_queue);
+	struct smsg_app_event *p, *n;
+	struct device *dev;
+
+	dev = get_device(smsg_app_dev);
+	if (!dev)
+		return;
+
+	spin_lock_bh(&smsg_event_queue_lock);
+	list_splice_init(&smsg_event_queue, &event_queue);
+	spin_unlock_bh(&smsg_event_queue_lock);
+
+	list_for_each_entry_safe(p, n, &event_queue, list) {
+		list_del(&p->list);
+		kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, p->envp);
+		smsg_app_event_free(p);
+	}
+
+	put_device(dev);
+}
+static DECLARE_WORK(smsg_event_work, smsg_event_work_fn);
+
+static void smsg_app_callback(const char *from, char *msg)
+{
+	struct smsg_app_event *se;
+
+	/* check if the originating z/VM user ID matches
+	 * the configured sender. */
+	if (sender && strlen(sender) > 0 && strcmp(from, sender) != 0)
+		return;
+
+	/* get start of message text (skip prefix and leading blanks) */
+	msg += strlen(SMSG_PREFIX);
+	while (*msg && isspace(*msg))
+		msg++;
+	if (*msg == '\0')
+		return;
+
+	/* allocate event list element and its environment */
+	se = smsg_app_event_alloc(from, msg);
+	if (!se)
+		return;
+
+	/* queue event and schedule work function */
+	spin_lock(&smsg_event_queue_lock);
+	list_add_tail(&se->list, &smsg_event_queue);
+	spin_unlock(&smsg_event_queue_lock);
+
+	schedule_work(&smsg_event_work);
+	return;
+}
+
+static int __init smsgiucv_app_init(void)
+{
+	struct device_driver *smsgiucv_drv;
+	int rc;
+
+	if (!MACHINE_IS_VM)
+		return -ENODEV;
+
+	smsg_app_dev = kzalloc(sizeof(*smsg_app_dev), GFP_KERNEL);
+	if (!smsg_app_dev)
+		return -ENOMEM;
+
+	smsgiucv_drv = driver_find(SMSGIUCV_DRV_NAME, &iucv_bus);
+	if (!smsgiucv_drv) {
+		kfree(smsg_app_dev);
+		return -ENODEV;
+	}
+
+	rc = dev_set_name(smsg_app_dev, KMSG_COMPONENT);
+	if (rc) {
+		kfree(smsg_app_dev);
+		goto fail_put_driver;
+	}
+	smsg_app_dev->bus = &iucv_bus;
+	smsg_app_dev->parent = iucv_root;
+	smsg_app_dev->release = (void (*)(struct device *)) kfree;
+	smsg_app_dev->driver = smsgiucv_drv;
+	rc = device_register(smsg_app_dev);
+	if (rc) {
+		put_device(smsg_app_dev);
+		goto fail_put_driver;
+	}
+
+	/* register with the smsgiucv device driver */
+	rc = smsg_register_callback(SMSG_PREFIX, smsg_app_callback);
+	if (rc) {
+		device_unregister(smsg_app_dev);
+		goto fail_put_driver;
+	}
+
+	rc = 0;
+fail_put_driver:
+	put_driver(smsgiucv_drv);
+	return rc;
+}
+module_init(smsgiucv_app_init);
+
+static void __exit smsgiucv_app_exit(void)
+{
+	/* unregister callback */
+	smsg_unregister_callback(SMSG_PREFIX, smsg_app_callback);
+
+	/* cancel pending work and flush any queued event work */
+	cancel_work_sync(&smsg_event_work);
+	smsg_event_work_fn(&smsg_event_work);
+
+	device_unregister(smsg_app_dev);
+}
+module_exit(smsgiucv_app_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Deliver z/VM CP SMSG as uevents");
+MODULE_AUTHOR("Hendrik Brueckner <brueckner@linux.vnet.ibm.com>");
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 71b97ff77cf0..6479273a3094 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -319,8 +319,6 @@ static void zfcp_qdio_setup_init_data(struct qdio_initialize *id,
 	id->input_handler = zfcp_qdio_int_resp;
 	id->output_handler = zfcp_qdio_int_req;
 	id->int_parm = (unsigned long) qdio;
-	id->flags = QDIO_INBOUND_0COPY_SBALS |
-		    QDIO_OUTBOUND_0COPY_SBALS | QDIO_USE_OUTBOUND_PCIS;
 	id->input_sbal_addr_array = (void **) (qdio->resp_q.sbal);
 	id->output_sbal_addr_array = (void **) (qdio->req_q.sbal);
 
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 208d6df9ed59..ff5716d5f044 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -492,7 +492,7 @@ static void init_alloc_map(struct orc_host * host)
  *	init_orchid		-	initialise the host adapter
  *	@host:host adapter to initialise
  *
- *	Initialise the controller and if neccessary load the firmware.
+ *	Initialise the controller and if necessary load the firmware.
  *
  *	Returns -1 if the initialisation fails.
  */
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 89a59484be02..a7714160fbc3 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -531,7 +531,7 @@ static void initio_read_eeprom(unsigned long base)
  *	initio_stop_bm		-	stop bus master
  *	@host: InitIO we are stopping
  *
- *	Stop any pending DMA operation, aborting the DMA if neccessary
+ *	Stop any pending DMA operation, aborting the DMA if necessary
  */
 
 static void initio_stop_bm(struct initio_host * host)
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 6fde2fabfd9b..774e7ac837a5 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -48,7 +48,7 @@ struct kmem_cache *scsi_pkt_cachep;
 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
-#define FC_SRB_ABORTED		(1 << 3)	/* abort acknowleged */
+#define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
@@ -519,7 +519,7 @@ crc_err:
  *
  * Called after receiving a Transfer Ready data descriptor.
  * If the LLD is capable of sequence offload then send down the
- * seq_blen ammount of data in single frame, otherwise send
+ * seq_blen amount of data in single frame, otherwise send
  * multiple frames of the maximum frame payload supported by
  * the target port.
  */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 08b6634cb994..2a40a6eabf4d 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -981,7 +981,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
  * function returns, it does not guarantee all the IOCBs are actually aborted.
  *
  * Return code
- *   0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0)
+ *   0 - Successfully issued abort iocb on all outstanding flogis (Always 0)
  **/
 int
 lpfc_els_abort_flogi(struct lpfc_hba *phba)
@@ -3129,7 +3129,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
 	    (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) {
 		/* A LS_RJT associated with Default RPI cleanup has its own
-		 * seperate code path.
+		 * separate code path.
 		 */
 		if (!(ndlp->nlp_flag & NLP_RM_DFLT_RPI))
 			ls_rjt = 1;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 7f21b47db791..483fb74bc592 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1575,7 +1575,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
 		case LPFC_PG_TYPE_NO_DIF:
 			num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
 					datasegcnt);
-			/* we shoud have 2 or more entries in buffer list */
+			/* we should have 2 or more entries in buffer list */
 			if (num_bde < 2)
 				goto err;
 			break;
@@ -1612,7 +1612,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
 
 			num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
 					datasegcnt, protsegcnt);
-			/* we shoud have 3 or more entries in buffer list */
+			/* we should have 3 or more entries in buffer list */
 			if (num_bde < 3)
 				goto err;
 			break;
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h
index 7db28cd49446..8c61a4fe1db9 100644
--- a/drivers/scsi/pcmcia/nsp_cs.h
+++ b/drivers/scsi/pcmcia/nsp_cs.h
@@ -187,7 +187,7 @@
 #define S_IO		BIT(1)    /* Input/Output line from SCSI bus */
 #define S_CD		BIT(2)    /* Command/Data line from SCSI bus */
 #define S_BUSY		BIT(3)    /* Busy line from SCSI bus         */
-#define S_ACK		BIT(4)    /* Acknowlege line from SCSI bus   */
+#define S_ACK		BIT(4)    /* Acknowledge line from SCSI bus  */
 #define S_REQUEST	BIT(5)    /* Request line from SCSI bus      */
 #define S_SELECT	BIT(6)	  /*                                 */
 #define S_ATN		BIT(7)	  /*                                 */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 9b44c6f1b10e..7985ae45d688 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2924,7 +2924,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		break;
 	default:
 		PM8001_MSG_DBG(pm8001_ha,
-			pm8001_printk("unkown device type(%x)\n", deviceType));
+			pm8001_printk("unknown device type(%x)\n", deviceType));
 		break;
 	}
 	phy->phy_type |= PORT_TYPE_SAS;
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 7f9c83a76390..3b2c98fba834 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -600,7 +600,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
   * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
   * device ID(according to device's sas address) and returned it to LLDD. From
   * now on, we communicate with HBA FW with the device ID which HBA assigned
-  * rather than sas address. it is the neccessary step for our HBA but it is
+  * rather than sas address. it is the necessary step for our HBA but it is
   * the optional for other HBA driver.
   */
 static int pm8001_dev_found_notify(struct domain_device *dev)
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 92f89d50850c..b8ad07c3449e 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -938,7 +938,7 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
 
 /*
  * pmcraid_ioctl_header - definition of header structure that preceeds all the
- * buffers given as ioctl arguements.
+ * buffers given as ioctl arguments.
  *
  * .signature           : always ASCII string, "PMCRAID"
  * .reserved            : not used
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index fa34b92850a6..1b8217076b0e 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -738,7 +738,7 @@ static int __devinit qpti_register_irq(struct qlogicpti *qpti)
 	 * sanely maintain.
 	 */
 	if (request_irq(qpti->irq, qpti_intr,
-			IRQF_SHARED, "Qlogic/PTI", qpti))
+			IRQF_SHARED, "QlogicPTI", qpti))
 		goto fail;
 
 	printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 466fae8ef770..a82ab3e2b4f7 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2111,7 +2111,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
  *	which is followed by sdaaa.
  *
  *	This is basically 26 base counting with one extra 'nil' entry
- *	at the beggining from the second digit on and can be
+ *	at the beginning from the second digit on and can be
  *	determined using similar method as 26 base conversion with the
  *	index shifted -1 after each digit is computed.
  *
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 1d7a8780e00c..0d9d6f7567f5 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -595,8 +595,6 @@ static int ses_intf_add(struct device *cdev,
 		ses_dev->page10_len = len;
 		buf = NULL;
 	}
-	kfree(hdr_buf);
-
 	scomp = kzalloc(sizeof(struct ses_component) * components, GFP_KERNEL);
 	if (!scomp)
 		goto err_free;
@@ -608,6 +606,8 @@ static int ses_intf_add(struct device *cdev,
 		goto err_free;
 	}
 
+	kfree(hdr_buf);
+
 	edev->scratch = ses_dev;
 	for (i = 0; i < components; i++)
 		edev->component[i].scratch = scomp + i;
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index 0807b260268b..fef0e3c75b16 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -226,7 +226,7 @@ static struct scsi_host_template sgiwd93_template = {
 	.use_clustering		= DISABLE_CLUSTERING,
 };
 
-static int __init sgiwd93_probe(struct platform_device *pdev)
+static int __devinit sgiwd93_probe(struct platform_device *pdev)
 {
 	struct sgiwd93_platform_data *pd = pdev->dev.platform_data;
 	unsigned char *wdregs = pd->wdregs;
diff --git a/drivers/scsi/sni_53c710.c b/drivers/scsi/sni_53c710.c
index 37b3359e863e..56cf0bb4ed1f 100644
--- a/drivers/scsi/sni_53c710.c
+++ b/drivers/scsi/sni_53c710.c
@@ -64,7 +64,7 @@ static struct scsi_host_template snirm710_template = {
 	.module		= THIS_MODULE,
 };
 
-static int __init snirm710_probe(struct platform_device *dev)
+static int __devinit snirm710_probe(struct platform_device *dev)
 {
 	unsigned long base;
 	struct NCR_700_Host_Parameters *hostdata;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 7c4ebe6ee18b..c3db16b7afa1 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2408,6 +2408,21 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
 }
 
 static void
+serial8250_set_ldisc(struct uart_port *port)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		serial8250_enable_ms(port);
+	} else
+		port->flags &= ~UPF_HARDPPS_CD;
+}
+
+static void
 serial8250_pm(struct uart_port *port, unsigned int state,
 	      unsigned int oldstate)
 {
@@ -2628,6 +2643,7 @@ static struct uart_ops serial8250_pops = {
 	.startup	= serial8250_startup,
 	.shutdown	= serial8250_shutdown,
 	.set_termios	= serial8250_set_termios,
+	.set_ldisc	= serial8250_set_ldisc,
 	.pm		= serial8250_pm,
 	.type		= serial8250_type,
 	.release_port	= serial8250_release_port,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d6ff73395623..f55c49475a8c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,11 +455,18 @@ config SERIAL_SAMSUNG
 	  provide all of these ports, depending on how the serial port
 	  pins are configured.
 
+config SERIAL_SAMSUNG_UARTS_4
+	bool
+	depends on ARM && PLAT_SAMSUNG
+	default y if CPU_S3C2443
+	help
+	  Internal node for the common case of 4 Samsung compatible UARTs
+
 config SERIAL_SAMSUNG_UARTS
 	int
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	default 2 if ARCH_S3C2400
-	default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
+	default 4 if SERIAL_SAMSUNG_UARTS_4
 	default 3
 	help
 	  Select the number of available UART ports for the Samsung S3C
@@ -526,20 +533,30 @@ config SERIAL_S3C24A0
 	  Serial port support for the Samsung S3C24A0 SoC
 
 config SERIAL_S3C6400
-	tristate "Samsung S3C6400/S3C6410 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
+	tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
-	  Serial port support for the Samsung S3C6400 and S3C6410
+	  Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
 	  SoCs
 
 config SERIAL_S5PC100
 	tristate "Samsung S5PC100 Serial port support"
 	depends on SERIAL_SAMSUNG && CPU_S5PC100
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
 	  Serial port support for the Samsung S5PC100 SoCs
 
+config SERIAL_S5PV210
+	tristate "Samsung S5PV210 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
+	select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+	default y
+	help
+	  Serial port support for Samsung's S5P Family of SoC's
+
 config SERIAL_MAX3100
 	tristate "MAX3100 support"
 	depends on SPI
@@ -996,7 +1013,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
 
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
-	depends on HAVE_CLK && (SUPERH || H8300)
+	depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE)
 	select SERIAL_CORE
 
 config SERIAL_SH_SCI_NR_UARTS
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 5548fe7df61d..6aa4723b74ee 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
 obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 429a8ae86933..e4b3c2c88bb6 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -471,6 +471,20 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&uap->port.lock, flags);
 }
 
+static void pl010_set_ldisc(struct uart_port *port)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		pl010_enable_ms(port);
+	} else
+		port->flags &= ~UPF_HARDPPS_CD;
+}
+
 static const char *pl010_type(struct uart_port *port)
 {
 	return port->type == PORT_AMBA ? "AMBA" : NULL;
@@ -531,6 +545,7 @@ static struct uart_ops amba_pl010_pops = {
 	.startup	= pl010_startup,
 	.shutdown	= pl010_shutdown,
 	.set_termios	= pl010_set_termios,
+	.set_ldisc	= pl010_set_ldisc,
 	.type		= pl010_type,
 	.release_port	= pl010_release_port,
 	.request_port	= pl010_request_port,
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index d00fcf8e6c70..e579d7a1807a 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -440,7 +440,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
 
 		temp = readl(sport->port.membase + USR2);
 		if (temp & USR2_BRCD) {
-			writel(temp | USR2_BRCD, sport->port.membase + USR2);
+			writel(USR2_BRCD, sport->port.membase + USR2);
 			if (uart_handle_break(&sport->port))
 				continue;
 		}
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index ce75e28e36ef..1700b1a2fb7e 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c2412_uart_inf = {
 	.name		= "Samsung S3C2412 UART",
 	.type		= PORT_S3C2412,
 	.fifosize	= 64,
+	.has_divslot	= 1,
 	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
 	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
 	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
new file mode 100644
index 000000000000..8dc03837617b
--- /dev/null
+++ b/drivers/serial/s5pv210.c
@@ -0,0 +1,154 @@
+/* linux/drivers/serial/s5pv210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S5PV210 SoC UARTs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <plat/regs-serial.h>
+#include "samsung.h"
+
+static int s5pv210_serial_setsource(struct uart_port *port,
+					struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	if (strcmp(clk->name, "pclk") == 0)
+		ucon &= ~S5PV210_UCON_CLKMASK;
+	else if (strcmp(clk->name, "uclk1") == 0)
+		ucon |= S5PV210_UCON_CLKMASK;
+	else {
+		printk(KERN_ERR "unknown clock source %s\n", clk->name);
+		return -EINVAL;
+	}
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+
+static int s5pv210_serial_getsource(struct uart_port *port,
+					struct s3c24xx_uart_clksrc *clk)
+{
+	u32 ucon = rd_regl(port, S3C2410_UCON);
+
+	clk->divisor = 1;
+
+	switch (ucon & S5PV210_UCON_CLKMASK) {
+	case S5PV210_UCON_PCLK:
+		clk->name = "pclk";
+		break;
+	case S5PV210_UCON_UCLK:
+		clk->name = "uclk1";
+		break;
+	}
+
+	return 0;
+}
+
+static int s5pv210_serial_resetport(struct uart_port *port,
+					struct s3c2410_uartcfg *cfg)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	ucon &= S5PV210_UCON_CLKMASK;
+	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+#define S5PV210_UART_DEFAULT_INFO(fifo_size)			\
+		.name		= "Samsung S5PV210 UART0",	\
+		.type		= PORT_S3C6400,			\
+		.fifosize	= fifo_size,			\
+		.has_divslot	= 1,				\
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,	\
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,	\
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,	\
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,	\
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,	\
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,	\
+		.get_clksrc	= s5pv210_serial_getsource,	\
+		.set_clksrc	= s5pv210_serial_setsource,	\
+		.reset_port	= s5pv210_serial_resetport
+
+static struct s3c24xx_uart_info s5p_port_fifo256 = {
+	S5PV210_UART_DEFAULT_INFO(256),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo64 = {
+	S5PV210_UART_DEFAULT_INFO(64),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo16 = {
+	S5PV210_UART_DEFAULT_INFO(16),
+};
+
+static struct s3c24xx_uart_info *s5p_uart_inf[] = {
+	[0] = &s5p_port_fifo256,
+	[1] = &s5p_port_fifo64,
+	[2] = &s5p_port_fifo16,
+	[3] = &s5p_port_fifo16,
+};
+
+/* device management */
+static int s5p_serial_probe(struct platform_device *pdev)
+{
+	return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
+}
+
+static struct platform_driver s5p_serial_drv = {
+	.probe		= s5p_serial_probe,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
+	.driver		= {
+		.name	= "s5pv210-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init s5pv210_serial_console_init(void)
+{
+	return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf);
+}
+
+console_initcall(s5pv210_serial_console_init);
+
+static int __init s5p_serial_init(void)
+{
+	return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf);
+}
+
+static void __exit s5p_serial_exit(void)
+{
+	platform_driver_unregister(&s5p_serial_drv);
+}
+
+module_init(s5p_serial_init);
+module_exit(s5p_serial_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s5pv210-uart");
+MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support");
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 52e3df113ec0..a9d6c5626a0a 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1271,7 +1271,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
 	unsigned long ufstat, utrstat;
 
 	if (ufcon & S3C2410_UFCON_FIFOMODE) {
-		/* fifo mode - check ammount of data in fifo registers... */
+		/* fifo mode - check amount of data in fifo registers... */
 
 		ufstat = rd_regl(port, S3C2410_UFSTAT);
 		return (ufstat & info->tx_fifofull) ? 0 : 1;
@@ -1374,7 +1374,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
  * data.
 */
 
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
+static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info)
 {
 	struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
 	struct platform_device **platdev_ptr;
@@ -1385,7 +1385,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
 	platdev_ptr = s3c24xx_uart_devs;
 
 	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
-		s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
+		s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
 	}
 
 	return 0;
@@ -1451,7 +1451,7 @@ static struct console s3c24xx_serial_console = {
 };
 
 int s3c24xx_serial_initconsole(struct platform_driver *drv,
-			       struct s3c24xx_uart_info *info)
+			       struct s3c24xx_uart_info **info)
 
 {
 	struct platform_device *dev = s3c24xx_uart_devs[0];
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 1fb22343df42..0ac06a07d25f 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -75,19 +75,24 @@ extern int s3c24xx_serial_probe(struct platform_device *dev,
 extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
 
 extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
-				      struct s3c24xx_uart_info *uart);
+				      struct s3c24xx_uart_info **uart);
 
 extern int s3c24xx_serial_init(struct platform_driver *drv,
 			       struct s3c24xx_uart_info *info);
 
 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
 
-#define s3c24xx_console_init(__drv, __inf)			\
-static int __init s3c_serial_console_init(void)			\
-{								\
-	return s3c24xx_serial_initconsole(__drv, __inf);	\
-}								\
-								\
+#define s3c24xx_console_init(__drv, __inf)				\
+static int __init s3c_serial_console_init(void)				\
+{									\
+	struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS];	\
+	int i;								\
+									\
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)		\
+		uinfo[i] = __inf;					\
+	return s3c24xx_serial_initconsole(__drv, uinfo);		\
+}									\
+									\
 console_initcall(s3c_serial_console_init)
 
 #else
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index f7d2589926d2..fad67d33b0bd 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -30,7 +30,8 @@
  */
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SHMOBILE)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define PORT_PTCR	   0xA405011EUL
 # define PORT_PVCR	   0xA4050122UL
@@ -228,7 +229,8 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SHMOBILE)
 # define SCIF_ORER    0x0200
 # define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
 # define SCIF_RFDC_MASK 0x007f
@@ -261,7 +263,8 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SHMOBILE)
 # define SCxSR_RDxF_CLEAR(port)	 (sci_in(port, SCxSR) & 0xfffc)
 # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
 # define SCxSR_TDxE_CLEAR(port)	 (sci_in(port, SCxSR) & 0xffdf)
@@ -356,7 +359,7 @@
     SCI_OUT(sci_size, sci_offset, value);				\
   }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_ARCH_SHMOBILE)
 #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
 		                sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
@@ -366,7 +369,8 @@
 	  CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SHMOBILE)
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -401,7 +405,8 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SHMOBILE)
 
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
@@ -413,7 +418,7 @@ SCIF_FNS(SCFCR,  0x18, 16)
 SCIF_FNS(SCFDR,  0x1c, 16)
 SCIF_FNS(SCxTDR, 0x20,  8)
 SCIF_FNS(SCxRDR, 0x24,  8)
-SCIF_FNS(SCLSR,  0x24, 16)
+SCIF_FNS(SCLSR,  0x00,  0)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
       defined(CONFIG_CPU_SUBTYPE_SH7724)
 SCIx_FNS(SCSMR,  0x00, 16, 0x00, 16)
@@ -583,7 +588,8 @@ static inline int sci_rxd_in(struct uart_port *port)
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SHMOBILE)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
       defined(CONFIG_CPU_SUBTYPE_SH7724)
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index 3a5a17db9474..c2750391fd34 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -762,6 +762,10 @@ static void __init intc_register_irq(struct intc_desc *desc,
 
 	if (desc->hw.ack_regs)
 		ack_handle[irq] = intc_ack_data(desc, d, enum_id);
+
+#ifdef CONFIG_ARM
+	set_irq_flags(irq, IRQF_VALID); /* Enable IRQ on ARM systems */
+#endif
 }
 
 static unsigned int __init save_reg(struct intc_desc_int *d,
@@ -1024,8 +1028,12 @@ unsigned int create_irq_nr(unsigned int irq_want, int node)
 out_unlock:
 	spin_unlock_irqrestore(&vector_lock, flags);
 
-	if (irq > 0)
+	if (irq > 0) {
 		dynamic_irq_init(irq);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID); /* Enable IRQ on ARM systems */
+#endif
+	}
 
 	return irq;
 }
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index c010733877ae..1fabede9e061 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -275,7 +275,7 @@ static inline u32 ack_bit(unsigned int irq)
  * Claim the FIQ handler (only one can be active at any one time) and
  * then setup the correct transfer code for this transfer.
  *
- * This call updates all the necessary state information if sucessful,
+ * This call updates all the necessary state information if successful,
  * so the caller does not need to do anything more than start the transfer
  * as normal, since the IRQ will have been re-routed to the FIQ handler.
 */
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index cadb6f7321ad..7ebecc92c61b 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -770,13 +770,8 @@ static struct usb_driver oled_driver = {
 	.id_table =	id_table,
 };
 
-static ssize_t version_show(struct class *dev, char *buf)
-{
-	return sprintf(buf, ASUS_OLED_UNDERSCORE_NAME " %s\n",
-		       ASUS_OLED_VERSION);
-}
-
-static CLASS_ATTR(version, S_IRUGO, version_show, NULL);
+static CLASS_ATTR_STRING(version, S_IRUGO,
+		 	ASUS_OLED_UNDERSCORE_NAME " " ASUS_OLED_VERSION);
 
 static int __init asus_oled_init(void)
 {
@@ -788,7 +783,7 @@ static int __init asus_oled_init(void)
 		return PTR_ERR(oled_class);
 	}
 
-	retval = class_create_file(oled_class, &class_attr_version);
+	retval = class_create_file(oled_class, &class_attr_version.attr);
 	if (retval) {
 		err("Error creating class version file");
 		goto error;
@@ -810,7 +805,7 @@ error:
 
 static void __exit asus_oled_exit(void)
 {
-	class_remove_file(oled_class, &class_attr_version);
+	class_remove_file(oled_class, &class_attr_version.attr);
 	class_destroy(oled_class);
 
 	usb_deregister(&oled_driver);
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 8aa1955f35ed..1da73ecd9799 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -44,17 +44,6 @@ config UIO_PDRV_GENIRQ
 
 	  If you don't know what to do here, say N.
 
-config UIO_SMX
-	tristate "SMX cryptengine UIO interface"
-	help
-	  Userspace IO interface to the Cryptography engine found on the
-	  Nias Digital SMX boards.  These will be available from Q4 2008
-	  from http://www.niasdigital.com.  The userspace part of this
-	  driver will be released under the GPL at the same time as the
-	  hardware and will be able to be downloaded from the same site.
-
-	  If you compile this as a module, it will be called uio_smx.
-
 config UIO_AEC
 	tristate "AEC video timestamp device"
 	depends on PCI
@@ -74,6 +63,7 @@ config UIO_AEC
 
 config UIO_SERCOS3
 	tristate "Automata Sercos III PCI card driver"
+	depends on PCI
 	help
 	  Userspace I/O interface for the Sercos III PCI card from
 	  Automata GmbH. The userspace part of this driver will be
@@ -87,11 +77,21 @@ config UIO_SERCOS3
 config UIO_PCI_GENERIC
 	tristate "Generic driver for PCI 2.3 and PCI Express cards"
 	depends on PCI
-	default n
 	help
 	  Generic driver that you can bind, dynamically, to any
 	  PCI 2.3 compliant and PCI Express card. It is useful,
 	  primarily, for virtualization scenarios.
 	  If you compile this as a module, it will be called uio_pci_generic.
 
+config UIO_NETX
+	tristate "Hilscher NetX Card driver"
+	depends on PCI
+	help
+	  Driver for Hilscher NetX based fieldbus cards (cifX, comX).
+	  This driver requires a userspace component that comes with the card
+	  or is available from Hilscher (http://www.hilscher.com).
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called uio_netx.
+
 endif
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index 73b2e7516729..18fd818c5b97 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_UIO)	+= uio.o
 obj-$(CONFIG_UIO_CIF)	+= uio_cif.o
 obj-$(CONFIG_UIO_PDRV)	+= uio_pdrv.o
 obj-$(CONFIG_UIO_PDRV_GENIRQ)	+= uio_pdrv_genirq.o
-obj-$(CONFIG_UIO_SMX)	+= uio_smx.o
 obj-$(CONFIG_UIO_AEC)	+= uio_aec.o
 obj-$(CONFIG_UIO_SERCOS3)	+= uio_sercos3.o
 obj-$(CONFIG_UIO_PCI_GENERIC)	+= uio_pci_generic.o
+obj-$(CONFIG_UIO_NETX)	+= uio_netx.o
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index e941367dd28f..4de382acd8f2 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -129,7 +129,7 @@ static ssize_t map_type_show(struct kobject *kobj, struct attribute *attr,
 	return entry->show(mem, buf);
 }
 
-static struct sysfs_ops map_sysfs_ops = {
+static const struct sysfs_ops map_sysfs_ops = {
 	.show = map_type_show,
 };
 
@@ -217,7 +217,7 @@ static ssize_t portio_type_show(struct kobject *kobj, struct attribute *attr,
 	return entry->show(port, buf);
 }
 
-static struct sysfs_ops portio_sysfs_ops = {
+static const struct sysfs_ops portio_sysfs_ops = {
 	.show = portio_type_show,
 };
 
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
new file mode 100644
index 000000000000..afbf0bd55cc9
--- /dev/null
+++ b/drivers/uio/uio_netx.c
@@ -0,0 +1,172 @@
+/*
+ * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
+ * See http://www.hilscher.com for details.
+ *
+ * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2008 Manuel Traut <manut@linutronix.de>
+ *
+ * Licensed under GPL version 2 only.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/uio_driver.h>
+
+#define PCI_VENDOR_ID_HILSCHER		0x15CF
+#define PCI_DEVICE_ID_HILSCHER_NETX	0x0000
+#define PCI_SUBDEVICE_ID_NXSB_PCA	0x3235
+#define PCI_SUBDEVICE_ID_NXPCA		0x3335
+
+#define DPM_HOST_INT_EN0	0xfff0
+#define DPM_HOST_INT_STAT0	0xffe0
+
+#define DPM_HOST_INT_MASK	0xe600ffff
+#define DPM_HOST_INT_GLOBAL_EN	0x80000000
+
+static irqreturn_t netx_handler(int irq, struct uio_info *dev_info)
+{
+	void __iomem *int_enable_reg = dev_info->mem[0].internal_addr
+					+ DPM_HOST_INT_EN0;
+	void __iomem *int_status_reg = dev_info->mem[0].internal_addr
+					+ DPM_HOST_INT_STAT0;
+
+	/* Is one of our interrupts enabled and active ? */
+	if (!(ioread32(int_enable_reg) & ioread32(int_status_reg)
+		& DPM_HOST_INT_MASK))
+		return IRQ_NONE;
+
+	/* Disable interrupt */
+	iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN,
+		int_enable_reg);
+	return IRQ_HANDLED;
+}
+
+static int __devinit netx_pci_probe(struct pci_dev *dev,
+					const struct pci_device_id *id)
+{
+	struct uio_info *info;
+	int bar;
+
+	info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	if (pci_enable_device(dev))
+		goto out_free;
+
+	if (pci_request_regions(dev, "netx"))
+		goto out_disable;
+
+	switch (id->device) {
+	case PCI_DEVICE_ID_HILSCHER_NETX:
+		bar = 0;
+		info->name = "netx";
+		break;
+	default:
+		bar = 2;
+		info->name = "netx_plx";
+	}
+
+	/* BAR0 or 2 points to the card's dual port memory */
+	info->mem[0].addr = pci_resource_start(dev, bar);
+	if (!info->mem[0].addr)
+		goto out_release;
+	info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar),
+						pci_resource_len(dev, bar));
+
+	if (!info->mem[0].internal_addr)
+			goto out_release;
+
+	info->mem[0].size = pci_resource_len(dev, bar);
+	info->mem[0].memtype = UIO_MEM_PHYS;
+	info->irq = dev->irq;
+	info->irq_flags = IRQF_SHARED;
+	info->handler = netx_handler;
+	info->version = "0.0.1";
+
+	/* Make sure all interrupts are disabled */
+	iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+
+	if (uio_register_device(&dev->dev, info))
+		goto out_unmap;
+
+	pci_set_drvdata(dev, info);
+	dev_info(&dev->dev, "Found %s card, registered UIO device.\n",
+				info->name);
+
+	return 0;
+
+out_unmap:
+	iounmap(info->mem[0].internal_addr);
+out_release:
+	pci_release_regions(dev);
+out_disable:
+	pci_disable_device(dev);
+out_free:
+	kfree(info);
+	return -ENODEV;
+}
+
+static void netx_pci_remove(struct pci_dev *dev)
+{
+	struct uio_info *info = pci_get_drvdata(dev);
+
+	/* Disable all interrupts */
+	iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+	uio_unregister_device(info);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+	pci_set_drvdata(dev, NULL);
+	iounmap(info->mem[0].internal_addr);
+
+	kfree(info);
+}
+
+static struct pci_device_id netx_pci_ids[] = {
+	{
+		.vendor =	PCI_VENDOR_ID_HILSCHER,
+		.device =	PCI_DEVICE_ID_HILSCHER_NETX,
+		.subvendor =	0,
+		.subdevice =	0,
+	},
+	{
+		.vendor =	PCI_VENDOR_ID_PLX,
+		.device =	PCI_DEVICE_ID_PLX_9030,
+		.subvendor =	PCI_VENDOR_ID_PLX,
+		.subdevice =	PCI_SUBDEVICE_ID_NXSB_PCA,
+	},
+	{
+		.vendor =	PCI_VENDOR_ID_PLX,
+		.device =	PCI_DEVICE_ID_PLX_9030,
+		.subvendor =	PCI_VENDOR_ID_PLX,
+		.subdevice =	PCI_SUBDEVICE_ID_NXPCA,
+	},
+	{ 0, }
+};
+
+static struct pci_driver netx_pci_driver = {
+	.name = "netx",
+	.id_table = netx_pci_ids,
+	.probe = netx_pci_probe,
+	.remove = netx_pci_remove,
+};
+
+static int __init netx_init_module(void)
+{
+	return pci_register_driver(&netx_pci_driver);
+}
+
+static void __exit netx_exit_module(void)
+{
+	pci_unregister_driver(&netx_pci_driver);
+}
+
+module_init(netx_init_module);
+module_exit(netx_exit_module);
+
+MODULE_DEVICE_TABLE(pci, netx_pci_ids);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hans J. Koch, Manuel Traut");
diff --git a/drivers/uio/uio_smx.c b/drivers/uio/uio_smx.c
deleted file mode 100644
index 44054a650a8a..000000000000
--- a/drivers/uio/uio_smx.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * UIO SMX Cryptengine driver.
- *
- * (C) 2008 Nias Digital P/L <bn@niasdigital.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/uio_driver.h>
-#include <linux/io.h>
-
-#define DRV_NAME "smx-ce"
-#define DRV_VERSION "0.03"
-
-#define SMX_CSR  0x00000000
-#define SMX_EnD  0x00000001
-#define SMX_RUN  0x00000002
-#define SMX_DRDY 0x00000004
-#define SMX_ERR  0x00000008
-
-static irqreturn_t smx_handler(int irq, struct uio_info *dev_info)
-{
-	void __iomem *csr = dev_info->mem[0].internal_addr + SMX_CSR;
-
-	u32 status = ioread32(csr);
-
-	if (!(status & SMX_DRDY))
-		return IRQ_NONE;
-
-	/* Disable interrupt */
-	iowrite32(status & ~SMX_DRDY, csr);
-	return IRQ_HANDLED;
-}
-
-static int __devinit smx_ce_probe(struct platform_device *dev)
-{
-
-	int ret = -ENODEV;
-	struct uio_info *info;
-	struct resource *regs;
-
-	info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!regs) {
-		dev_err(&dev->dev, "No memory resource specified\n");
-		goto out_free;
-	}
-
-	info->mem[0].addr = regs->start;
-	if (!info->mem[0].addr) {
-		dev_err(&dev->dev, "Invalid memory resource\n");
-		goto out_free;
-	}
-
-	info->mem[0].size = regs->end - regs->start + 1;
-	info->mem[0].internal_addr = ioremap(regs->start, info->mem[0].size);
-
-	if (!info->mem[0].internal_addr) {
-		dev_err(&dev->dev, "Can't remap memory address range\n");
-		goto out_free;
-	}
-
-	info->mem[0].memtype = UIO_MEM_PHYS;
-
-	info->name = "smx-ce";
-	info->version = "0.03";
-
-	info->irq = platform_get_irq(dev, 0);
-	if (info->irq < 0) {
-		ret = info->irq;
-		dev_err(&dev->dev, "No (or invalid) IRQ resource specified\n");
-		goto out_unmap;
-	}
-
-	info->irq_flags = IRQF_SHARED;
-	info->handler = smx_handler;
-
-	platform_set_drvdata(dev, info);
-
-	ret = uio_register_device(&dev->dev, info);
-
-	if (ret)
-		goto out_unmap;
-
-	return 0;
-
-out_unmap:
-	iounmap(info->mem[0].internal_addr);
-out_free:
-	kfree(info);
-
-	return ret;
-}
-
-static int __devexit smx_ce_remove(struct platform_device *dev)
-{
-	struct uio_info *info = platform_get_drvdata(dev);
-
-	uio_unregister_device(info);
-	platform_set_drvdata(dev, NULL);
-	iounmap(info->mem[0].internal_addr);
-
-	kfree(info);
-
-	return 0;
-}
-
-static struct platform_driver smx_ce_driver = {
-	.probe		= smx_ce_probe,
-	.remove		= __devexit_p(smx_ce_remove),
-	.driver		= {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init smx_ce_init_module(void)
-{
-	return platform_driver_register(&smx_ce_driver);
-}
-module_init(smx_ce_init_module);
-
-static void __exit smx_ce_exit_module(void)
-{
-	platform_driver_unregister(&smx_ce_driver);
-}
-module_exit(smx_ce_exit_module);
-
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Ben Nizette <bn@niasdigital.com>");
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index a7037bf81688..f3c233806fa3 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -489,10 +489,10 @@ void usb_driver_release_interface(struct usb_driver *driver,
 	if (device_is_registered(dev)) {
 		device_release_driver(dev);
 	} else {
-		down(&dev->sem);
+		device_lock(dev);
 		usb_unbind_interface(dev);
 		dev->driver = NULL;
-		up(&dev->sem);
+		device_unlock(dev);
 	}
 }
 EXPORT_SYMBOL_GPL(usb_driver_release_interface);
diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c
index 4bc2bf3d602e..20a802ecaa15 100644
--- a/drivers/usb/gadget/fsl_mx3_udc.c
+++ b/drivers/usb/gadget/fsl_mx3_udc.c
@@ -17,6 +17,8 @@
 #include <linux/fsl_devices.h>
 #include <linux/platform_device.h>
 
+#include <mach/hardware.h>
+
 static struct clk *mxc_ahb_clk;
 static struct clk *mxc_usb_clk;
 
@@ -28,14 +30,16 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 
-	mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
-	if (IS_ERR(mxc_ahb_clk))
-		return PTR_ERR(mxc_ahb_clk);
+	if (!cpu_is_mx35()) {
+		mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+		if (IS_ERR(mxc_ahb_clk))
+			return PTR_ERR(mxc_ahb_clk);
 
-	ret = clk_enable(mxc_ahb_clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
-		goto eenahb;
+		ret = clk_enable(mxc_ahb_clk);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+			goto eenahb;
+		}
 	}
 
 	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
@@ -50,6 +54,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 	if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 	    (freq < 59999000 || freq > 60001000)) {
 		dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+		ret = -EINVAL;
 		goto eclkrate;
 	}
 
@@ -66,9 +71,11 @@ eclkrate:
 	clk_put(mxc_usb_clk);
 	mxc_usb_clk = NULL;
 egusb:
-	clk_disable(mxc_ahb_clk);
+	if (!cpu_is_mx35())
+		clk_disable(mxc_ahb_clk);
 eenahb:
-	clk_put(mxc_ahb_clk);
+	if (!cpu_is_mx35())
+		clk_put(mxc_ahb_clk);
 	return ret;
 }
 
@@ -90,6 +97,8 @@ void fsl_udc_clk_release(void)
 		clk_disable(mxc_usb_clk);
 		clk_put(mxc_usb_clk);
 	}
-	clk_disable(mxc_ahb_clk);
-	clk_put(mxc_ahb_clk);
+	if (!cpu_is_mx35()) {
+		clk_disable(mxc_ahb_clk);
+		clk_put(mxc_ahb_clk);
+	}
 }
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index e6fedbd5a654..be5fb34d9602 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -65,6 +65,10 @@
 #include <mach/pxa25x-udc.h>
 #endif
 
+#ifdef CONFIG_ARCH_LUBBOCK
+#include <mach/lubbock.h>
+#endif
+
 #include <asm/mach/udc_pxa2xx.h>
 
 
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 7e5bf593d386..f742c8e7397c 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -30,7 +30,7 @@
 
 #include <plat/regs-usb-hsotg-phy.h>
 #include <plat/regs-usb-hsotg.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-sys.h>
 #include <plat/udc-hs.h>
 
 #define DMA_ADDR_INVALID (~((dma_addr_t)0))
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 66913811af5e..a883f9dd3f8a 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -274,7 +274,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 	/* NOTE: DaVinci shadows the Mentor IRQs.  Don't manage them through
 	 * the Mentor registers (except for setup), use the TI ones and EOI.
 	 *
-	 * Docs describe irq "vector" registers asociated with the CPPI and
+	 * Docs describe irq "vector" registers associated with the CPPI and
 	 * USB EOI registers.  These hold a bitmask corresponding to the
 	 * current IRQ, not an irq handler address.  Would using those bits
 	 * resolve some of the races observed in this dispatch code??
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 292894a2c247..8d8062b10e2f 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -491,7 +491,7 @@ static inline u8  musb_read_txhubport(void __iomem *mbase, u8 epnum)
 #define MUSB_FLAT_OFFSET(_epnum, _offset)	\
 	(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
 
-/* Not implemented - HW has seperate Tx/Rx FIFO */
+/* Not implemented - HW has separate Tx/Rx FIFO */
 #define MUSB_TXCSR_MODE			0x0000
 
 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index baf74b44e6ed..e23c77925e7a 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -152,7 +152,7 @@ struct cypress_private {
 	int isthrottled;		   /* if throttled, discard reads */
 	wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 	char prev_status, diff_status;	   /* used for TIOCMIWAIT */
-	/* we pass a pointer to this as the arguement sent to
+	/* we pass a pointer to this as the argument sent to
 	   cypress_set_termios old_termios */
 	struct ktermios tmp_termios; 	   /* stores the old termios settings */
 };
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index f37476e22684..701452ae9197 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -115,7 +115,7 @@ static void opticon_bulk_callback(struct urb *urb)
 		}
 	} else {
 		dev_dbg(&priv->udev->dev,
-			"Improper ammount of data received from the device, "
+			"Improper amount of data received from the device, "
 			"%d bytes", urb->actual_length);
 	}
 
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 72398888858f..ee190cc1757c 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -94,7 +94,7 @@ static void symbol_int_callback(struct urb *urb)
 		}
 	} else {
 		dev_dbg(&priv->udev->dev,
-			"Improper ammount of data received from the device, "
+			"Improper amount of data received from the device, "
 			"%d bytes", urb->actual_length);
 	}
 
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index fd2fd4e277e1..759cda55f7c3 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -198,7 +198,7 @@ struct wusb_port {
  *                 ports) this HC will take. Read-only.
  *
  * @port      	   Array of port status for each fake root port. Guaranteed to
- *                 always be the same lenght during device existence
+ *                 always be the same length during device existence
  *                 [this allows for some unlocked but referenced reading].
  *
  * @mmcies_max	   Max number of Information Elements this HC can send
diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c
index da77e41de990..08bd6dbfd4a6 100644
--- a/drivers/uwb/driver.c
+++ b/drivers/uwb/driver.c
@@ -74,13 +74,16 @@
 unsigned long beacon_timeout_ms = 500;
 
 static
-ssize_t beacon_timeout_ms_show(struct class *class, char *buf)
+ssize_t beacon_timeout_ms_show(struct class *class,
+				struct class_attribute *attr,
+				char *buf)
 {
 	return scnprintf(buf, PAGE_SIZE, "%lu\n", beacon_timeout_ms);
 }
 
 static
 ssize_t beacon_timeout_ms_store(struct class *class,
+				struct class_attribute *attr,
 				const char *buf, size_t size)
 {
 	unsigned long bt;
diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c
index 7bf8c6febae7..f2eb4d8b76c9 100644
--- a/drivers/uwb/i1480/i1480-est.c
+++ b/drivers/uwb/i1480/i1480-est.c
@@ -54,7 +54,7 @@ static struct uwb_est_entry i1480_est_fd01[] = {
 		.size = sizeof(struct i1480_rceb) + 2 },
 };
 
-static int i1480_est_init(void)
+static int __init i1480_est_init(void)
 {
 	int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
 				      i1480_est_fd00,
@@ -73,7 +73,7 @@ static int i1480_est_init(void)
 }
 module_init(i1480_est_init);
 
-static void i1480_est_exit(void)
+static void __exit i1480_est_exit(void)
 {
 	uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
 			   i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00));
diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c
index cdd6c8efc9f8..5fad4e791b3e 100644
--- a/drivers/uwb/umc-bus.c
+++ b/drivers/uwb/umc-bus.c
@@ -62,12 +62,12 @@ int umc_controller_reset(struct umc_dev *umc)
 	struct device *parent = umc->dev.parent;
 	int ret = 0;
 
-	if(down_trylock(&parent->sem))
+	if (device_trylock(parent))
 		return -EAGAIN;
 	ret = device_for_each_child(parent, parent, umc_bus_pre_reset_helper);
 	if (ret >= 0)
 		ret = device_for_each_child(parent, parent, umc_bus_post_reset_helper);
-	up(&parent->sem);
+	device_unlock(parent);
 
 	return ret;
 }
diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h
index d5bcfc1c227a..157485c862c0 100644
--- a/drivers/uwb/uwb-internal.h
+++ b/drivers/uwb/uwb-internal.h
@@ -366,12 +366,12 @@ struct dentry *uwb_dbg_create_pal_dir(struct uwb_pal *pal);
 
 static inline void uwb_dev_lock(struct uwb_dev *uwb_dev)
 {
-	down(&uwb_dev->dev.sem);
+	device_lock(&uwb_dev->dev);
 }
 
 static inline void uwb_dev_unlock(struct uwb_dev *uwb_dev)
 {
-	up(&uwb_dev->dev.sem);
+	device_unlock(&uwb_dev->dev);
 }
 
 #endif /* #ifndef __UWB_INTERNAL_H__ */
diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c
index 5a777d8624da..6210fe1fd1bb 100644
--- a/drivers/uwb/uwbd.c
+++ b/drivers/uwb/uwbd.c
@@ -43,7 +43,7 @@
  *
  * EVENTS
  *
- * Events have a type, a subtype, a lenght, some other stuff and the
+ * Events have a type, a subtype, a length, some other stuff and the
  * data blob, which depends on the event. The header is 'struct
  * uwb_event'; for payloads, see 'struct uwbd_evt_*'.
  *
diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c
index 0370399ff4bb..6627c94cc854 100644
--- a/drivers/uwb/wlp/sysfs.c
+++ b/drivers/uwb/wlp/sysfs.c
@@ -615,8 +615,7 @@ ssize_t wlp_wss_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static
-struct sysfs_ops wss_sysfs_ops = {
+static const struct sysfs_ops wss_sysfs_ops = {
 	.show	= wlp_wss_attr_show,
 	.store	= wlp_wss_attr_store,
 };
diff --git a/drivers/video/68328fb.c b/drivers/video/68328fb.c
index 0b17824b0eb5..2110556f76b3 100644
--- a/drivers/video/68328fb.c
+++ b/drivers/video/68328fb.c
@@ -308,7 +308,7 @@ static int mc68x328fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	 * Pseudocolor:
 	 *    uses offset = 0 && length = RAMDAC register width.
 	 *    var->{color}.offset is 0
-	 *    var->{color}.length contains widht of DAC
+	 *    var->{color}.length contains width of DAC
 	 *    cmap is not used
 	 *    RAMDAC[X] is programmed to (red, green, blue)
 	 * Truecolor:
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5a5c303a6373..dabe804ba575 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -400,9 +400,12 @@ config FB_SA1100
 	  If you plan to use the LCD display with your SA-1100 system, say
 	  Y here.
 
+config HAVE_FB_IMX
+	bool
+
 config FB_IMX
 	tristate "Motorola i.MX LCD support"
-	depends on FB && (ARCH_MX1 || ARCH_MX2)
+	depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -909,6 +912,18 @@ config FB_XVR2500
 	  mostly initialized the card already.  It is treated as a
 	  completely dumb framebuffer device.
 
+config FB_XVR1000
+	bool "Sun XVR-1000 support"
+	depends on SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-1000 and similar
+	  graphics cards.  The driver only works on sparc64 systems where
+	  the system firmware has mostly initialized the card already.  It
+	  is treated as a completely dumb framebuffer device.
+
 config FB_PVR2
 	tristate "NEC PowerVR 2 display support"
 	depends on FB && SH_DREAMCAST
@@ -1494,7 +1509,6 @@ config FB_VIA
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
-       select FB_SOFT_CURSOR
        select I2C_ALGOBIT
        select I2C
        help
@@ -1945,6 +1959,27 @@ config FB_S3C2410_DEBUG
 	  Turn on debugging messages. Note that you can set/unset at run time
 	  through sysfs
 
+config FB_NUC900
+        bool "NUC900 LCD framebuffer support"
+        depends on FB && ARCH_W90X900
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        ---help---
+          Frame buffer driver for the built-in LCD controller in the Nuvoton
+          NUC900 processor
+
+config GPM1040A0_320X240
+        bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
+        depends on FB_NUC900
+
+config FB_NUC900_DEBUG
+        bool "NUC900 lcd debug messages"
+        depends on FB_NUC900
+        help
+          Turn on debugging messages. Note that you can set/unset at run time
+          through sysfs
+
 config FB_SM501
 	tristate "Silicon Motion SM501 framebuffer support"
 	depends on FB && MFD_SM501
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 4ecb30c4f3f2..ddc2af2ba45b 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_FB_N411)             += n411.o
 obj-$(CONFIG_FB_HGA)              += hgafb.o
 obj-$(CONFIG_FB_XVR500)           += sunxvr500.o
 obj-$(CONFIG_FB_XVR2500)          += sunxvr2500.o
+obj-$(CONFIG_FB_XVR1000)          += sunxvr1000.o
 obj-$(CONFIG_FB_IGA)              += igafb.o
 obj-$(CONFIG_FB_APOLLO)           += dnfb.o
 obj-$(CONFIG_FB_Q40)              += q40fb.o
@@ -129,6 +130,7 @@ obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
 obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
 obj-$(CONFIG_FB_MSM)              += msm/
+obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_UVESA)            += uvesafb.o
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 0bcc59eb37fa..43d7d5067361 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -1221,7 +1221,7 @@ free_unused_pages(unsigned int virtual_start, unsigned int virtual_end)
 	printk("acornfb: freed %dK memory\n", mb_freed);
 }
 
-static int __init acornfb_probe(struct platform_device *dev)
+static int __devinit acornfb_probe(struct platform_device *dev)
 {
 	unsigned long size;
 	u_int h_sync, v_sync;
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index c3431691c9f2..01554d696528 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -504,7 +504,7 @@ static struct fb_ops arcfb_ops = {
 	.fb_ioctl 	= arcfb_ioctl,
 };
 
-static int __init arcfb_probe(struct platform_device *dev)
+static int __devinit arcfb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int retval = -ENOMEM;
diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c
index 9fe90ce928fb..e70bc225fe31 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/asiliantfb.c
@@ -140,7 +140,7 @@ static void asiliant_calc_dclk2(u32 *ppixclock, u8 *dclk2_m, u8 *dclk2_n, u8 *dc
 
 		/* 3 <= m <= 257 */
 		if (m >= 3 && m <= 257) {
-			unsigned new_error = ((Ftarget * n) - (Fref * m)) >= 0 ?
+			unsigned new_error = Ftarget * n >= Fref * m ?
 					       ((Ftarget * n) - (Fref * m)) : ((Fref * m) - (Ftarget * n));
 			if (new_error < best_error) {
 				best_n = n;
@@ -152,7 +152,7 @@ static void asiliant_calc_dclk2(u32 *ppixclock, u8 *dclk2_m, u8 *dclk2_n, u8 *dc
 		else if (m <= 1028) {
 			/* remember there are still only 8-bits of precision in m, so
 			 * avoid over-optimistic error calculations */
-			unsigned new_error = ((Ftarget * n) - (Fref * (m & ~3))) >= 0 ?
+			unsigned new_error = Ftarget * n >= Fref * (m & ~3) ?
 					       ((Ftarget * n) - (Fref * (m & ~3))) : ((Fref * (m & ~3)) - (Ftarget * n));
 			if (new_error < best_error) {
 				best_n = n;
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index e49ae5edcc00..814312a7452f 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -82,7 +82,6 @@ struct bfin_bf54xfb_info {
 	unsigned char *fb_buffer;	/* RGB Buffer */
 
 	dma_addr_t dma_handle;
-	int lq043_mmap;
 	int lq043_open_cnt;
 	int irq;
 	spinlock_t lock;	/* lock */
@@ -316,7 +315,6 @@ static int bfin_bf54x_fb_release(struct fb_info *info, int user)
 	spin_lock(&fbi->lock);
 
 	fbi->lq043_open_cnt--;
-	fbi->lq043_mmap = 0;
 
 	if (fbi->lq043_open_cnt <= 0) {
 
@@ -374,33 +372,6 @@ static int bfin_bf54x_fb_check_var(struct fb_var_screeninfo *var,
 	return 0;
 }
 
-static int bfin_bf54x_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
-
-	struct bfin_bf54xfb_info *fbi = info->par;
-
-	if (fbi->lq043_mmap)
-		return -1;
-
-	spin_lock(&fbi->lock);
-	fbi->lq043_mmap = 1;
-	spin_unlock(&fbi->lock);
-
-	vma->vm_start = (unsigned long)(fbi->fb_buffer);
-
-	vma->vm_end = vma->vm_start + info->fix.smem_len;
-	/* For those who don't understand how mmap works, go read
-	 *   Documentation/nommu-mmap.txt.
-	 * For those that do, you will know that the VM_MAYSHARE flag
-	 * must be set in the vma->vm_flags structure on noMMU
-	 *   Other flags can be set, and are documented in
-	 *   include/linux/mm.h
-	 */
-	vma->vm_flags |=  VM_MAYSHARE | VM_SHARED;
-
-	return 0;
-}
-
 int bfin_bf54x_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 {
 	if (nocursor)
@@ -452,7 +423,6 @@ static struct fb_ops bfin_bf54x_fb_ops = {
 	.fb_fillrect = cfb_fillrect,
 	.fb_copyarea = cfb_copyarea,
 	.fb_imageblit = cfb_imageblit,
-	.fb_mmap = bfin_bf54x_fb_mmap,
 	.fb_cursor = bfin_bf54x_fb_cursor,
 	.fb_setcolreg = bfin_bf54x_fb_setcolreg,
 };
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c
index b690c269784a..03872365a36d 100644
--- a/drivers/video/bfin-lq035q1-fb.c
+++ b/drivers/video/bfin-lq035q1-fb.c
@@ -22,7 +22,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
-#include <linux/dma-mapping.h>
 
 #include <asm/blackfin.h>
 #include <asm/irq.h>
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index 2549c53b26a0..5653d083a983 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -87,7 +87,6 @@ struct bfin_t350mcqbfb_info {
 	struct device *dev;
 	unsigned char *fb_buffer;	/* RGB Buffer */
 	dma_addr_t dma_handle;
-	int lq043_mmap;
 	int lq043_open_cnt;
 	int irq;
 	spinlock_t lock;	/* lock */
@@ -235,7 +234,6 @@ static int bfin_t350mcqb_fb_release(struct fb_info *info, int user)
 	spin_lock(&fbi->lock);
 
 	fbi->lq043_open_cnt--;
-	fbi->lq043_mmap = 0;
 
 	if (fbi->lq043_open_cnt <= 0) {
 		bfin_t350mcqb_disable_ppi();
@@ -293,32 +291,6 @@ static int bfin_t350mcqb_fb_check_var(struct fb_var_screeninfo *var,
 	return 0;
 }
 
-static int bfin_t350mcqb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
-	struct bfin_t350mcqbfb_info *fbi = info->par;
-
-	if (fbi->lq043_mmap)
-		return -1;
-
-	spin_lock(&fbi->lock);
-	fbi->lq043_mmap = 1;
-	spin_unlock(&fbi->lock);
-
-	vma->vm_start = (unsigned long)(fbi->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET);
-
-	vma->vm_end = vma->vm_start + info->fix.smem_len;
-	/* For those who don't understand how mmap works, go read
-	 *   Documentation/nommu-mmap.txt.
-	 * For those that do, you will know that the VM_MAYSHARE flag
-	 * must be set in the vma->vm_flags structure on noMMU
-	 *   Other flags can be set, and are documented in
-	 *   include/linux/mm.h
-	 */
-	vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
-
-	return 0;
-}
-
 int bfin_t350mcqb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 {
 	if (nocursor)
@@ -370,7 +342,6 @@ static struct fb_ops bfin_t350mcqb_fb_ops = {
 	.fb_fillrect = cfb_fillrect,
 	.fb_copyarea = cfb_copyarea,
 	.fb_imageblit = cfb_imageblit,
-	.fb_mmap = bfin_t350mcqb_fb_mmap,
 	.fb_cursor = bfin_t350mcqb_fb_cursor,
 	.fb_setcolreg = bfin_t350mcqb_fb_setcolreg,
 };
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
index df9ccb901d86..ebda6876d3a9 100644
--- a/drivers/video/broadsheetfb.c
+++ b/drivers/video/broadsheetfb.c
@@ -29,11 +29,65 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/list.h>
+#include <linux/firmware.h>
 #include <linux/uaccess.h>
 
 #include <video/broadsheetfb.h>
 
-/* Display specific information */
+/* track panel specific parameters */
+struct panel_info {
+	int w;
+	int h;
+	u16 sdcfg;
+	u16 gdcfg;
+	u16 lutfmt;
+	u16 fsynclen;
+	u16 fendfbegin;
+	u16 lsynclen;
+	u16 lendlbegin;
+	u16 pixclk;
+};
+
+/* table of panel specific parameters to be indexed into by the board drivers */
+static struct panel_info panel_table[] = {
+	{	/* standard 6" on TFT backplane */
+		.w = 800,
+		.h = 600,
+		.sdcfg = (100 | (1 << 8) | (1 << 9)),
+		.gdcfg = 2,
+		.lutfmt = (4 | (1 << 7)),
+		.fsynclen = 4,
+		.fendfbegin = (10 << 8) | 4,
+		.lsynclen = 10,
+		.lendlbegin = (100 << 8) | 4,
+		.pixclk = 6,
+	},
+	{	/* custom 3.7" flexible on PET or steel */
+		.w = 320,
+		.h = 240,
+		.sdcfg = (67 | (0 << 8) | (0 << 9) | (0 << 10) | (0 << 12)),
+		.gdcfg = 3,
+		.lutfmt = (4 | (1 << 7)),
+		.fsynclen = 0,
+		.fendfbegin = (80 << 8) | 4,
+		.lsynclen = 10,
+		.lendlbegin = (80 << 8) | 20,
+		.pixclk = 14,
+	},
+	{	/* standard 9.7" on TFT backplane */
+		.w = 1200,
+		.h = 825,
+		.sdcfg = (100 | (1 << 8) | (1 << 9) | (0 << 10) | (0 << 12)),
+		.gdcfg = 2,
+		.lutfmt = (4 | (1 << 7)),
+		.fsynclen = 0,
+		.fendfbegin = (4 << 8) | 4,
+		.lsynclen = 4,
+		.lendlbegin = (60 << 8) | 10,
+		.pixclk = 3,
+	},
+};
+
 #define DPY_W 800
 #define DPY_H 600
 
@@ -62,30 +116,30 @@ static struct fb_var_screeninfo broadsheetfb_var __devinitdata = {
 };
 
 /* main broadsheetfb functions */
-static void broadsheet_issue_data(struct broadsheetfb_par *par, u16 data)
+static void broadsheet_gpio_issue_data(struct broadsheetfb_par *par, u16 data)
 {
 	par->board->set_ctl(par, BS_WR, 0);
 	par->board->set_hdb(par, data);
 	par->board->set_ctl(par, BS_WR, 1);
 }
 
-static void broadsheet_issue_cmd(struct broadsheetfb_par *par, u16 data)
+static void broadsheet_gpio_issue_cmd(struct broadsheetfb_par *par, u16 data)
 {
 	par->board->set_ctl(par, BS_DC, 0);
-	broadsheet_issue_data(par, data);
+	broadsheet_gpio_issue_data(par, data);
 }
 
-static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
+static void broadsheet_gpio_send_command(struct broadsheetfb_par *par, u16 data)
 {
 	par->board->wait_for_rdy(par);
 
 	par->board->set_ctl(par, BS_CS, 0);
-	broadsheet_issue_cmd(par, data);
+	broadsheet_gpio_issue_cmd(par, data);
 	par->board->set_ctl(par, BS_DC, 1);
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
-static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+static void broadsheet_gpio_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
 					int argc, u16 *argv)
 {
 	int i;
@@ -93,15 +147,43 @@ static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
 	par->board->wait_for_rdy(par);
 
 	par->board->set_ctl(par, BS_CS, 0);
-	broadsheet_issue_cmd(par, cmd);
+	broadsheet_gpio_issue_cmd(par, cmd);
 	par->board->set_ctl(par, BS_DC, 1);
 
 	for (i = 0; i < argc; i++)
-		broadsheet_issue_data(par, argv[i]);
+		broadsheet_gpio_issue_data(par, argv[i]);
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
-static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
+static void broadsheet_mmio_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+				    int argc, u16 *argv)
+{
+	int i;
+
+	par->board->mmio_write(par, BS_MMIO_CMD, cmd);
+
+	for (i = 0; i < argc; i++)
+		par->board->mmio_write(par, BS_MMIO_DATA, argv[i]);
+}
+
+static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
+{
+	if (par->board->mmio_write)
+		par->board->mmio_write(par, BS_MMIO_CMD, data);
+	else
+		broadsheet_gpio_send_command(par, data);
+}
+
+static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+				    int argc, u16 *argv)
+{
+	if (par->board->mmio_write)
+		broadsheet_mmio_send_cmdargs(par, cmd, argc, argv);
+	else
+		broadsheet_gpio_send_cmdargs(par, cmd, argc, argv);
+}
+
+static void broadsheet_gpio_burst_write(struct broadsheetfb_par *par, int size,
 					u16 *data)
 {
 	int i;
@@ -121,7 +203,30 @@ static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
-static u16 broadsheet_get_data(struct broadsheetfb_par *par)
+static void broadsheet_mmio_burst_write(struct broadsheetfb_par *par, int size,
+				   u16 *data)
+{
+	int i;
+	u16 tmp;
+
+	for (i = 0; i < size; i++) {
+		tmp = (data[i] & 0x0F) << 4;
+		tmp |= (data[i] & 0x0F00) << 4;
+		par->board->mmio_write(par, BS_MMIO_DATA, tmp);
+	}
+
+}
+
+static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
+				   u16 *data)
+{
+	if (par->board->mmio_write)
+		broadsheet_mmio_burst_write(par, size, data);
+	else
+		broadsheet_gpio_burst_write(par, size, data);
+}
+
+static u16 broadsheet_gpio_get_data(struct broadsheetfb_par *par)
 {
 	u16 res;
 	/* wait for ready to go hi. (lo is busy) */
@@ -141,7 +246,16 @@ static u16 broadsheet_get_data(struct broadsheetfb_par *par)
 	return res;
 }
 
-static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
+
+static u16 broadsheet_get_data(struct broadsheetfb_par *par)
+{
+	if (par->board->mmio_read)
+		return par->board->mmio_read(par);
+	else
+		return broadsheet_gpio_get_data(par);
+}
+
+static void broadsheet_gpio_write_reg(struct broadsheetfb_par *par, u16 reg,
 					u16 data)
 {
 	/* wait for ready to go hi. (lo is busy) */
@@ -150,44 +264,541 @@ static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
 	/* cs lo, dc lo for cmd, we lo for each data, db as usual */
 	par->board->set_ctl(par, BS_CS, 0);
 
-	broadsheet_issue_cmd(par, BS_CMD_WR_REG);
+	broadsheet_gpio_issue_cmd(par, BS_CMD_WR_REG);
 
 	par->board->set_ctl(par, BS_DC, 1);
 
-	broadsheet_issue_data(par, reg);
-	broadsheet_issue_data(par, data);
+	broadsheet_gpio_issue_data(par, reg);
+	broadsheet_gpio_issue_data(par, data);
 
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
+static void broadsheet_mmio_write_reg(struct broadsheetfb_par *par, u16 reg,
+				 u16 data)
+{
+	par->board->mmio_write(par, BS_MMIO_CMD, BS_CMD_WR_REG);
+	par->board->mmio_write(par, BS_MMIO_DATA, reg);
+	par->board->mmio_write(par, BS_MMIO_DATA, data);
+
+}
+
+static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
+					u16 data)
+{
+	if (par->board->mmio_write)
+		broadsheet_mmio_write_reg(par, reg, data);
+	else
+		broadsheet_gpio_write_reg(par, reg, data);
+}
+
+static void broadsheet_write_reg32(struct broadsheetfb_par *par, u16 reg,
+					u32 data)
+{
+	broadsheet_write_reg(par, reg, cpu_to_le32(data) & 0xFFFF);
+	broadsheet_write_reg(par, reg + 2, (cpu_to_le32(data) >> 16) & 0xFFFF);
+}
+
+
 static u16 broadsheet_read_reg(struct broadsheetfb_par *par, u16 reg)
 {
-	broadsheet_send_command(par, reg);
-	msleep(100);
+	broadsheet_send_cmdargs(par, BS_CMD_RD_REG, 1, &reg);
+	par->board->wait_for_rdy(par);
 	return broadsheet_get_data(par);
 }
 
+/* functions for waveform manipulation */
+static int is_broadsheet_pll_locked(struct broadsheetfb_par *par)
+{
+	return broadsheet_read_reg(par, 0x000A) & 0x0001;
+}
+
+static int broadsheet_setup_plls(struct broadsheetfb_par *par)
+{
+	int retry_count = 0;
+	u16 tmp;
+
+	/* disable arral saemipu mode */
+	broadsheet_write_reg(par, 0x0006, 0x0000);
+
+	broadsheet_write_reg(par, 0x0010, 0x0004);
+	broadsheet_write_reg(par, 0x0012, 0x5949);
+	broadsheet_write_reg(par, 0x0014, 0x0040);
+	broadsheet_write_reg(par, 0x0016, 0x0000);
+
+	do {
+		if (retry_count++ > 100)
+			return -ETIMEDOUT;
+		mdelay(1);
+	} while (!is_broadsheet_pll_locked(par));
+
+	tmp = broadsheet_read_reg(par, 0x0006);
+	tmp &= ~0x1;
+	broadsheet_write_reg(par, 0x0006, tmp);
+
+	return 0;
+}
+
+static int broadsheet_setup_spi(struct broadsheetfb_par *par)
+{
+
+	broadsheet_write_reg(par, 0x0204, ((3 << 3) | 1));
+	broadsheet_write_reg(par, 0x0208, 0x0001);
+
+	return 0;
+}
+
+static int broadsheet_setup_spiflash(struct broadsheetfb_par *par,
+						u16 *orig_sfmcd)
+{
+
+	*orig_sfmcd = broadsheet_read_reg(par, 0x0204);
+	broadsheet_write_reg(par, 0x0208, 0);
+	broadsheet_write_reg(par, 0x0204, 0);
+	broadsheet_write_reg(par, 0x0204, ((3 << 3) | 1));
+
+	return 0;
+}
+
+static int broadsheet_spiflash_wait_for_bit(struct broadsheetfb_par *par,
+						u16 reg, int bitnum, int val,
+						int timeout)
+{
+	u16 tmp;
+
+	do {
+		tmp = broadsheet_read_reg(par, reg);
+		if (((tmp >> bitnum) & 1) == val)
+			return 0;
+		mdelay(1);
+	} while (timeout--);
+
+	return -ETIMEDOUT;
+}
+
+static int broadsheet_spiflash_write_byte(struct broadsheetfb_par *par, u8 data)
+{
+	broadsheet_write_reg(par, 0x0202, (data | 0x100));
+
+	return broadsheet_spiflash_wait_for_bit(par, 0x0206, 3, 0, 100);
+}
+
+static int broadsheet_spiflash_read_byte(struct broadsheetfb_par *par, u8 *data)
+{
+	int err;
+	u16 tmp;
+
+	broadsheet_write_reg(par, 0x0202, 0);
+
+	err = broadsheet_spiflash_wait_for_bit(par, 0x0206, 3, 0, 100);
+	if (err)
+		return err;
+
+	tmp = broadsheet_read_reg(par, 0x200);
+
+	*data = tmp & 0xFF;
+
+	return 0;
+}
+
+static int broadsheet_spiflash_wait_for_status(struct broadsheetfb_par *par,
+								int timeout)
+{
+	u8 tmp;
+	int err;
+
+	do {
+		broadsheet_write_reg(par, 0x0208, 1);
+
+		err = broadsheet_spiflash_write_byte(par, 0x05);
+		if (err)
+			goto failout;
+
+		err = broadsheet_spiflash_read_byte(par, &tmp);
+		if (err)
+			goto failout;
+
+		broadsheet_write_reg(par, 0x0208, 0);
+
+		if (!(tmp & 0x1))
+			return 0;
+
+		mdelay(5);
+	} while (timeout--);
+
+	dev_err(par->info->device, "Timed out waiting for spiflash status\n");
+	return -ETIMEDOUT;
+
+failout:
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+static int broadsheet_spiflash_op_on_address(struct broadsheetfb_par *par,
+							u8 op, u32 addr)
+{
+	int i;
+	u8 tmp;
+	int err;
+
+	broadsheet_write_reg(par, 0x0208, 1);
+
+	err = broadsheet_spiflash_write_byte(par, op);
+	if (err)
+		return err;
+
+	for (i = 2; i >= 0; i--) {
+		tmp = ((addr >> (i * 8)) & 0xFF);
+		err = broadsheet_spiflash_write_byte(par, tmp);
+		if (err)
+			return err;
+	}
+
+	return err;
+}
+
+static int broadsheet_verify_spiflash(struct broadsheetfb_par *par,
+						int *flash_type)
+{
+	int err = 0;
+	u8 sig;
+
+	err = broadsheet_spiflash_op_on_address(par, 0xAB, 0x00000000);
+	if (err)
+		goto failout;
+
+	err = broadsheet_spiflash_read_byte(par, &sig);
+	if (err)
+		goto failout;
+
+	if ((sig != 0x10) && (sig != 0x11)) {
+		dev_err(par->info->device, "Unexpected flash type\n");
+		err = -EINVAL;
+		goto failout;
+	}
+
+	*flash_type = sig;
+
+failout:
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+static int broadsheet_setup_for_wfm_write(struct broadsheetfb_par *par,
+					u16 *initial_sfmcd, int *flash_type)
+
+{
+	int err;
+
+	err = broadsheet_setup_plls(par);
+	if (err)
+		return err;
+
+	broadsheet_write_reg(par, 0x0106, 0x0203);
+
+	err = broadsheet_setup_spi(par);
+	if (err)
+		return err;
+
+	err = broadsheet_setup_spiflash(par, initial_sfmcd);
+	if (err)
+		return err;
+
+	return broadsheet_verify_spiflash(par, flash_type);
+}
+
+static int broadsheet_spiflash_write_control(struct broadsheetfb_par *par,
+						int mode)
+{
+	int err;
+
+	broadsheet_write_reg(par, 0x0208, 1);
+	if (mode)
+		err = broadsheet_spiflash_write_byte(par, 0x06);
+	else
+		err = broadsheet_spiflash_write_byte(par, 0x04);
+
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+static int broadsheet_spiflash_erase_sector(struct broadsheetfb_par *par,
+						int addr)
+{
+	int err;
+
+	broadsheet_spiflash_write_control(par, 1);
+
+	err = broadsheet_spiflash_op_on_address(par, 0xD8, addr);
+
+	broadsheet_write_reg(par, 0x0208, 0);
+
+	if (err)
+		return err;
+
+	err = broadsheet_spiflash_wait_for_status(par, 1000);
+
+	return err;
+}
+
+static int broadsheet_spiflash_read_range(struct broadsheetfb_par *par,
+						int addr, int size, char *data)
+{
+	int err;
+	int i;
+
+	err = broadsheet_spiflash_op_on_address(par, 0x03, addr);
+	if (err)
+		goto failout;
+
+	for (i = 0; i < size; i++) {
+		err = broadsheet_spiflash_read_byte(par, &data[i]);
+		if (err)
+			goto failout;
+	}
+
+failout:
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+#define BS_SPIFLASH_PAGE_SIZE 256
+static int broadsheet_spiflash_write_page(struct broadsheetfb_par *par,
+						int addr, const char *data)
+{
+	int err;
+	int i;
+
+	broadsheet_spiflash_write_control(par, 1);
+
+	err = broadsheet_spiflash_op_on_address(par, 0x02, addr);
+	if (err)
+		goto failout;
+
+	for (i = 0; i < BS_SPIFLASH_PAGE_SIZE; i++) {
+		err = broadsheet_spiflash_write_byte(par, data[i]);
+		if (err)
+			goto failout;
+	}
+
+	broadsheet_write_reg(par, 0x0208, 0);
+
+	err = broadsheet_spiflash_wait_for_status(par, 100);
+
+failout:
+	return err;
+}
+
+static int broadsheet_spiflash_write_sector(struct broadsheetfb_par *par,
+				int addr, const char *data, int sector_size)
+{
+	int i;
+	int err;
+
+	for (i = 0; i < sector_size; i += BS_SPIFLASH_PAGE_SIZE) {
+		err = broadsheet_spiflash_write_page(par, addr + i, &data[i]);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+/*
+ * The caller must guarantee that the data to be rewritten is entirely
+ * contained within this sector. That is, data_start_addr + data_len
+ * must be less than sector_start_addr + sector_size.
+ */
+static int broadsheet_spiflash_rewrite_sector(struct broadsheetfb_par *par,
+					int sector_size, int data_start_addr,
+					int data_len, const char *data)
+{
+	int err;
+	char *sector_buffer;
+	int tail_start_addr;
+	int start_sector_addr;
+
+	sector_buffer = kzalloc(sizeof(char)*sector_size, GFP_KERNEL);
+	if (!sector_buffer)
+		return -ENOMEM;
+
+	/* the start address of the sector is the 0th byte of that sector */
+	start_sector_addr = (data_start_addr / sector_size) * sector_size;
+
+	/*
+	 * check if there is head data that we need to readback into our sector
+	 * buffer first
+	 */
+	if (data_start_addr != start_sector_addr) {
+		/*
+		 * we need to read every byte up till the start address of our
+		 * data and we put it into our sector buffer.
+		 */
+		err = broadsheet_spiflash_read_range(par, start_sector_addr,
+						data_start_addr, sector_buffer);
+		if (err)
+			return err;
+	}
+
+	/* now we copy our data into the right place in the sector buffer */
+	memcpy(sector_buffer + data_start_addr, data, data_len);
+
+	/*
+	 * now we check if there is a tail section of the sector that we need to
+	 * readback.
+	 */
+	tail_start_addr = (data_start_addr + data_len) % sector_size;
+
+	if (tail_start_addr) {
+		int tail_len;
+
+		tail_len = sector_size - tail_start_addr;
+
+		/* now we read this tail into our sector buffer */
+		err = broadsheet_spiflash_read_range(par, tail_start_addr,
+			tail_len, sector_buffer + tail_start_addr);
+		if (err)
+			return err;
+	}
+
+	/* if we got here we have the full sector that we want to rewrite. */
+
+	/* first erase the sector */
+	err = broadsheet_spiflash_erase_sector(par, start_sector_addr);
+	if (err)
+		return err;
+
+	/* now write it */
+	err = broadsheet_spiflash_write_sector(par, start_sector_addr,
+					sector_buffer, sector_size);
+	return err;
+}
+
+static int broadsheet_write_spiflash(struct broadsheetfb_par *par, u32 wfm_addr,
+				const u8 *wfm, int bytecount, int flash_type)
+{
+	int sector_size;
+	int err;
+	int cur_addr;
+	int writecount;
+	int maxlen;
+	int offset = 0;
+
+	switch (flash_type) {
+	case 0x10:
+		sector_size = 32*1024;
+		break;
+	case 0x11:
+	default:
+		sector_size = 64*1024;
+		break;
+	}
+
+	while (bytecount) {
+		cur_addr = wfm_addr + offset;
+		maxlen = roundup(cur_addr, sector_size) - cur_addr;
+		writecount = min(bytecount, maxlen);
+
+		err = broadsheet_spiflash_rewrite_sector(par, sector_size,
+				cur_addr, writecount, wfm + offset);
+		if (err)
+			return err;
+
+		offset += writecount;
+		bytecount -= writecount;
+	}
+
+	return 0;
+}
+
+static int broadsheet_store_waveform_to_spiflash(struct broadsheetfb_par *par,
+						const u8 *wfm, size_t wfm_size)
+{
+	int err = 0;
+	u16 initial_sfmcd = 0;
+	int flash_type = 0;
+
+	err = broadsheet_setup_for_wfm_write(par, &initial_sfmcd, &flash_type);
+	if (err)
+		goto failout;
+
+	err = broadsheet_write_spiflash(par, 0x886, wfm, wfm_size, flash_type);
+
+failout:
+	broadsheet_write_reg(par, 0x0204, initial_sfmcd);
+	return err;
+}
+
+static ssize_t broadsheet_loadstore_waveform(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t len)
+{
+	int err;
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct broadsheetfb_par *par = info->par;
+	const struct firmware *fw_entry;
+
+	if (len < 1)
+		return -EINVAL;
+
+	err = request_firmware(&fw_entry, "broadsheet.wbf", dev);
+	if (err < 0) {
+		dev_err(dev, "Failed to get broadsheet waveform\n");
+		goto err_failed;
+	}
+
+	/* try to enforce reasonable min max on waveform */
+	if ((fw_entry->size < 8*1024) || (fw_entry->size > 64*1024)) {
+		dev_err(dev, "Invalid waveform\n");
+		err = -EINVAL;
+		goto err_failed;
+	}
+
+	mutex_lock(&(par->io_lock));
+	err = broadsheet_store_waveform_to_spiflash(par, fw_entry->data,
+							fw_entry->size);
+
+	mutex_unlock(&(par->io_lock));
+	if (err < 0) {
+		dev_err(dev, "Failed to store broadsheet waveform\n");
+		goto err_failed;
+	}
+
+	dev_info(dev, "Stored broadsheet waveform, size %zd\n", fw_entry->size);
+
+	return len;
+
+err_failed:
+	return err;
+}
+static DEVICE_ATTR(loadstore_waveform, S_IWUSR, NULL,
+			broadsheet_loadstore_waveform);
+
+/* upper level functions that manipulate the display and other stuff */
 static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
 {
 	u16 args[5];
-
-	args[0] = DPY_W;
-	args[1] = DPY_H;
-	args[2] = (100 | (1 << 8) | (1 << 9)); /* sdcfg */
-	args[3] = 2; /* gdrv cfg */
-	args[4] = (4 | (1 << 7)); /* lut index format */
+	int xres = par->info->var.xres;
+	int yres = par->info->var.yres;
+
+	args[0] = panel_table[par->panel_index].w;
+	args[1] = panel_table[par->panel_index].h;
+	args[2] = panel_table[par->panel_index].sdcfg;
+	args[3] = panel_table[par->panel_index].gdcfg;
+	args[4] = panel_table[par->panel_index].lutfmt;
 	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
 
 	/* did the controller really set it? */
 	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
 
-	args[0] = 4; /* fsync len */
-	args[1] = (10 << 8) | 4; /* fend/fbegin len */
-	args[2] = 10; /* line sync len */
-	args[3] = (100 << 8) | 4; /* line end/begin len */
-	args[4] = 6; /* pixel clock cfg */
+	args[0] = panel_table[par->panel_index].fsynclen;
+	args[1] = panel_table[par->panel_index].fendfbegin;
+	args[2] = panel_table[par->panel_index].lsynclen;
+	args[3] = panel_table[par->panel_index].lendlbegin;
+	args[4] = panel_table[par->panel_index].pixclk;
 	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_TMG, 5, args);
 
+	broadsheet_write_reg32(par, 0x310, xres*yres*2);
+
 	/* setup waveform */
 	args[0] = 0x886;
 	args[1] = 0;
@@ -207,8 +818,9 @@ static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
 	args[0] = 0x154;
 	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
 
-	broadsheet_burst_write(par, DPY_W*DPY_H/2,
-				(u16 *) par->info->screen_base);
+	broadsheet_burst_write(par, (panel_table[par->panel_index].w *
+					panel_table[par->panel_index].h)/2,
+					(u16 *) par->info->screen_base);
 
 	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
 
@@ -222,6 +834,21 @@ static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
 	par->board->wait_for_rdy(par);
 }
 
+static void __devinit broadsheet_identify(struct broadsheetfb_par *par)
+{
+	u16 rev, prc;
+	struct device *dev = par->info->device;
+
+	rev = broadsheet_read_reg(par, BS_REG_REV);
+	prc = broadsheet_read_reg(par, BS_REG_PRC);
+	dev_info(dev, "Broadsheet Rev 0x%x, Product Code 0x%x\n", rev, prc);
+
+	if (prc != 0x0047)
+		dev_warn(dev, "Unrecognized Broadsheet Product Code\n");
+	if (rev != 0x0100)
+		dev_warn(dev, "Unrecognized Broadsheet Revision\n");
+}
+
 static void __devinit broadsheet_init(struct broadsheetfb_par *par)
 {
 	broadsheet_send_command(par, BS_CMD_INIT_SYS_RUN);
@@ -236,6 +863,7 @@ static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par,
 	u16 args[5];
 	unsigned char *buf = (unsigned char *)par->info->screen_base;
 
+	mutex_lock(&(par->io_lock));
 	/* y1 must be a multiple of 4 so drop the lower bits */
 	y1 &= 0xFFFC;
 	/* y2 must be a multiple of 4 , but - 1 so up the lower bits */
@@ -265,6 +893,7 @@ static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par,
 	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
 
 	par->board->wait_for_rdy(par);
+	mutex_unlock(&(par->io_lock));
 
 }
 
@@ -272,13 +901,15 @@ static void broadsheetfb_dpy_update(struct broadsheetfb_par *par)
 {
 	u16 args[5];
 
+	mutex_lock(&(par->io_lock));
 	args[0] = 0x3 << 4;
 	broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
 
 	args[0] = 0x154;
 	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
-	broadsheet_burst_write(par, DPY_W*DPY_H/2,
-				(u16 *) par->info->screen_base);
+	broadsheet_burst_write(par, (panel_table[par->panel_index].w *
+					panel_table[par->panel_index].h)/2,
+					(u16 *) par->info->screen_base);
 
 	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
 
@@ -290,7 +921,7 @@ static void broadsheetfb_dpy_update(struct broadsheetfb_par *par)
 	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
 
 	par->board->wait_for_rdy(par);
-
+	mutex_unlock(&(par->io_lock));
 }
 
 /* this is called back from the deferred io workqueue */
@@ -436,6 +1067,8 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev)
 	unsigned char *videomemory;
 	struct broadsheetfb_par *par;
 	int i;
+	int dpyw, dpyh;
+	int panel_index;
 
 	/* pick up board specific routines */
 	board = dev->dev.platform_data;
@@ -450,7 +1083,24 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev)
 	if (!info)
 		goto err;
 
-	videomemorysize = (DPY_W*DPY_H);
+	switch (board->get_panel_type()) {
+	case 37:
+		panel_index = 1;
+		break;
+	case 97:
+		panel_index = 2;
+		break;
+	case 6:
+	default:
+		panel_index = 0;
+		break;
+	}
+
+	dpyw = panel_table[panel_index].w;
+	dpyh = panel_table[panel_index].h;
+
+	videomemorysize = roundup((dpyw*dpyh), PAGE_SIZE);
+
 	videomemory = vmalloc(videomemorysize);
 	if (!videomemory)
 		goto err_fb_rel;
@@ -460,16 +1110,25 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev)
 	info->screen_base = (char *)videomemory;
 	info->fbops = &broadsheetfb_ops;
 
+	broadsheetfb_var.xres = dpyw;
+	broadsheetfb_var.yres = dpyh;
+	broadsheetfb_var.xres_virtual = dpyw;
+	broadsheetfb_var.yres_virtual = dpyh;
 	info->var = broadsheetfb_var;
+
+	broadsheetfb_fix.line_length = dpyw;
 	info->fix = broadsheetfb_fix;
 	info->fix.smem_len = videomemorysize;
 	par = info->par;
+	par->panel_index = panel_index;
 	par->info = info;
 	par->board = board;
 	par->write_reg = broadsheet_write_reg;
 	par->read_reg = broadsheet_read_reg;
 	init_waitqueue_head(&par->waitq);
 
+	mutex_init(&par->io_lock);
+
 	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
 
 	info->fbdefio = &broadsheetfb_defio;
@@ -496,13 +1155,20 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev)
 	if (retval < 0)
 		goto err_free_irq;
 
+	broadsheet_identify(par);
+
 	broadsheet_init(par);
 
 	retval = register_framebuffer(info);
 	if (retval < 0)
 		goto err_free_irq;
+
 	platform_set_drvdata(dev, info);
 
+	retval = device_create_file(&dev->dev, &dev_attr_loadstore_waveform);
+	if (retval < 0)
+		goto err_unreg_fb;
+
 	printk(KERN_INFO
 	       "fb%d: Broadsheet frame buffer, using %dK of video memory\n",
 	       info->node, videomemorysize >> 10);
@@ -510,6 +1176,8 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev)
 
 	return 0;
 
+err_unreg_fb:
+	unregister_framebuffer(info);
 err_free_irq:
 	board->cleanup(par);
 err_cmap:
@@ -530,6 +1198,8 @@ static int __devexit broadsheetfb_remove(struct platform_device *dev)
 
 	if (info) {
 		struct broadsheetfb_par *par = info->par;
+
+		device_remove_file(info->dev, &dev_attr_loadstore_waveform);
 		unregister_framebuffer(info);
 		fb_deferred_io_cleanup(info);
 		par->board->cleanup(par);
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index 108b89e09a80..5eb61b5adfe8 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -287,7 +287,7 @@ static struct fb_ops cobalt_lcd_fbops = {
 	.fb_cursor	= cobalt_lcdfb_cursor,
 };
 
-static int __init cobalt_lcdfb_probe(struct platform_device *dev)
+static int __devinit cobalt_lcdfb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	struct resource *res;
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index d25df51bb0d2..581d2dbf675a 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -210,7 +210,7 @@ static int __init efifb_setup(char *options)
 	return 0;
 }
 
-static int __init efifb_probe(struct platform_device *dev)
+static int __devinit efifb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int err;
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index 2735b79e52a1..6d755bb3a2bc 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -602,7 +602,7 @@ static int epson1355fb_remove(struct platform_device *dev)
 	return 0;
 }
 
-int __init epson1355fb_probe(struct platform_device *dev)
+int __devinit epson1355fb_probe(struct platform_device *dev)
 {
 	struct epson1355_par *default_par;
 	struct fb_info *info;
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 695fa013fe7e..5643a35c1746 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -1128,7 +1128,7 @@ static int __init gbefb_setup(char *options)
 	return 0;
 }
 
-static int __init gbefb_probe(struct platform_device *p_dev)
+static int __devinit gbefb_probe(struct platform_device *p_dev)
 {
 	int i, ret = 0;
 	struct fb_info *info;
diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c
index 0129c044f6d6..db9b785b56eb 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/hgafb.c
@@ -551,7 +551,7 @@ static struct fb_ops hgafb_ops = {
 	 *  Initialization
 	 */
 
-static int __init hgafb_probe(struct platform_device *pdev)
+static int __devinit hgafb_probe(struct platform_device *pdev)
 {
 	struct fb_info *info;
 
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 73c83a8de2d3..bf78779199c6 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -325,7 +325,7 @@ static struct fb_ops hitfb_ops = {
 	.fb_imageblit	= cfb_imageblit,
 };
 
-static int __init hitfb_probe(struct platform_device *dev)
+static int __devinit hitfb_probe(struct platform_device *dev)
 {
 	unsigned short lcdclor, ldr3, ldvndr;
 	struct fb_info *info;
diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c
index fabb0c59a211..8280a58a0e55 100644
--- a/drivers/video/mb862xx/mb862xxfb.c
+++ b/drivers/video/mb862xx/mb862xxfb.c
@@ -31,15 +31,6 @@
 #define CARMINE_MEM_SIZE	0x8000000
 #define DRV_NAME		"mb862xxfb"
 
-#if defined(CONFIG_LWMON5)
-static struct mb862xx_gc_mode lwmon5_gc_mode = {
-	/* Mode for Sharp LQ104V1DG61 TFT LCD Panel */
-	{ "640x480", 60, 640, 480, 40000, 48, 16, 32, 11, 96, 2, 0, 0, 0 },
-	/* 16 bits/pixel, 32MB, 100MHz, SDRAM memory mode value */
-	16, 0x2000000, GC_CCF_COT_100, 0x414fb7f2
-};
-#endif
-
 #if defined(CONFIG_SOCRATES)
 static struct mb862xx_gc_mode socrates_gc_mode = {
 	/* Mode for Prime View PM070WL4 TFT LCD Panel */
@@ -600,10 +591,6 @@ static int __devinit of_platform_mb862xx_probe(struct of_device *ofdev,
 		goto irqdisp;
 	}
 
-#if defined(CONFIG_LWMON5)
-	par->gc_mode = &lwmon5_gc_mode;
-#endif
-
 #if defined(CONFIG_SOCRATES)
 	par->gc_mode = &socrates_gc_mode;
 #endif
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
index 01f77bcc68f9..afea9abbd678 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/mbx/mbxfb.c
@@ -693,7 +693,7 @@ static void __devinit setup_memc(struct fb_info *fbi)
 	unsigned long tmp;
 	int i;
 
-	/* FIXME: use platfrom specific parameters */
+	/* FIXME: use platform specific parameters */
 	/* setup SDRAM controller */
 	write_reg_dly((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS |
 		LMCFG_LMA_TS),
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 0129f1bc3522..b895aae41630 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -893,7 +893,7 @@ const struct fb_videomode *fb_match_mode(const struct fb_var_screeninfo *var,
 }
 
 /**
- * fb_add_videomode: adds videomode entry to modelist
+ * fb_add_videomode - adds videomode entry to modelist
  * @mode: videomode to add
  * @head: struct list_head of modelist
  *
@@ -928,7 +928,7 @@ int fb_add_videomode(const struct fb_videomode *mode, struct list_head *head)
 }
 
 /**
- * fb_delete_videomode: removed videomode entry from modelist
+ * fb_delete_videomode - removed videomode entry from modelist
  * @mode: videomode to remove
  * @head: struct list_head of modelist
  *
@@ -953,7 +953,7 @@ void fb_delete_videomode(const struct fb_videomode *mode,
 }
 
 /**
- * fb_destroy_modelist: destroy modelist
+ * fb_destroy_modelist - destroy modelist
  * @head: struct list_head of modelist
  */
 void fb_destroy_modelist(struct list_head *head)
@@ -968,7 +968,7 @@ void fb_destroy_modelist(struct list_head *head)
 EXPORT_SYMBOL_GPL(fb_destroy_modelist);
 
 /**
- * fb_videomode_to_modelist: convert mode array to mode list
+ * fb_videomode_to_modelist - convert mode array to mode list
  * @modedb: array of struct fb_videomode
  * @num: number of entries in array
  * @head: struct list_head of modelist
diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c
new file mode 100644
index 000000000000..6bf0d460a738
--- /dev/null
+++ b/drivers/video/nuc900fb.c
@@ -0,0 +1,779 @@
+/*
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *  Description:
+ *    Nuvoton LCD Controller Driver
+ *  Author:
+ *    Wang Qiang (rurality.linux@gmail.com) 2009/12/11
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ldm.h>
+#include <mach/fb.h>
+#include <mach/clkdev.h>
+
+#include "nuc900fb.h"
+
+
+/*
+ *  Initialize the nuc900 video (dual) buffer address
+ */
+static void nuc900fb_set_lcdaddr(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	void __iomem *regs = fbi->io;
+	unsigned long vbaddr1, vbaddr2;
+
+	vbaddr1  = info->fix.smem_start;
+	vbaddr2  = info->fix.smem_start;
+	vbaddr2 += info->fix.line_length * info->var.yres;
+
+	/* set frambuffer start phy addr*/
+	writel(vbaddr1, regs + REG_LCM_VA_BADDR0);
+	writel(vbaddr2, regs + REG_LCM_VA_BADDR1);
+
+	writel(fbi->regs.lcd_va_fbctrl, regs + REG_LCM_VA_FBCTRL);
+	writel(fbi->regs.lcd_va_scale, regs + REG_LCM_VA_SCALE);
+}
+
+/*
+ *	calculate divider for lcd div
+ */
+static unsigned int nuc900fb_calc_pixclk(struct nuc900fb_info *fbi,
+					 unsigned long pixclk)
+{
+	unsigned long clk = fbi->clk_rate;
+	unsigned long long div;
+
+	/* pixclk is in picseconds. our clock is in Hz*/
+	/* div = (clk * pixclk)/10^12 */
+	div = (unsigned long long)clk * pixclk;
+	div >>= 12;
+	do_div(div, 625 * 625UL * 625);
+
+	dev_dbg(fbi->dev, "pixclk %ld, divisor is %lld\n", pixclk, div);
+
+	return div;
+}
+
+/*
+ *	Check the video params of 'var'.
+ */
+static int nuc900fb_check_var(struct fb_var_screeninfo *var,
+			       struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
+	struct nuc900fb_display *display = NULL;
+	struct nuc900fb_display *default_display = mach_info->displays +
+						   mach_info->default_display;
+	int i;
+
+	dev_dbg(fbi->dev, "check_var(var=%p, info=%p)\n", var, info);
+
+	/* validate x/y resolution */
+	/* choose default mode if possible */
+	if (var->xres == default_display->xres &&
+	    var->yres == default_display->yres &&
+	    var->bits_per_pixel == default_display->bpp)
+		display = default_display;
+	else
+		for (i = 0; i < mach_info->num_displays; i++)
+			if (var->xres == mach_info->displays[i].xres &&
+			    var->yres == mach_info->displays[i].yres &&
+			    var->bits_per_pixel == mach_info->displays[i].bpp) {
+				display = mach_info->displays + i;
+				break;
+			}
+
+	if (display == NULL) {
+		printk(KERN_ERR "wrong resolution or depth %dx%d at %d bit per pixel\n",
+			var->xres, var->yres, var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	/* it should be the same size as the display */
+	var->xres_virtual	= display->xres;
+	var->yres_virtual	= display->yres;
+	var->height		= display->height;
+	var->width		= display->width;
+
+	/* copy lcd settings */
+	var->pixclock		= display->pixclock;
+	var->left_margin	= display->left_margin;
+	var->right_margin	= display->right_margin;
+	var->upper_margin	= display->upper_margin;
+	var->lower_margin	= display->lower_margin;
+	var->vsync_len		= display->vsync_len;
+	var->hsync_len		= display->hsync_len;
+
+	var->transp.offset	= 0;
+	var->transp.length	= 0;
+
+	fbi->regs.lcd_dccs = display->dccs;
+	fbi->regs.lcd_device_ctrl = display->devctl;
+	fbi->regs.lcd_va_fbctrl = display->fbctrl;
+	fbi->regs.lcd_va_scale = display->scale;
+
+	/* set R/G/B possions */
+	switch (var->bits_per_pixel) {
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+	default:
+		var->red.offset 	= 0;
+		var->red.length 	= var->bits_per_pixel;
+		var->green 		= var->red;
+		var->blue		= var->red;
+		break;
+	case 12:
+		var->red.length		= 4;
+		var->green.length	= 4;
+		var->blue.length	= 4;
+		var->red.offset		= 8;
+		var->green.offset	= 4;
+		var->blue.offset	= 0;
+		break;
+	case 16:
+		var->red.length		= 5;
+		var->green.length	= 6;
+		var->blue.length	= 5;
+		var->red.offset		= 11;
+		var->green.offset	= 5;
+		var->blue.offset	= 0;
+		break;
+	case 18:
+		var->red.length		= 6;
+		var->green.length	= 6;
+		var->blue.length	= 6;
+		var->red.offset		= 12;
+		var->green.offset	= 6;
+		var->blue.offset	= 0;
+		break;
+	case 32:
+		var->red.length		= 8;
+		var->green.length	= 8;
+		var->blue.length	= 8;
+		var->red.offset		= 16;
+		var->green.offset	= 8;
+		var->blue.offset	= 0;
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ *	Calculate lcd register values from var setting & save into hw
+ */
+static void nuc900fb_calculate_lcd_regs(const struct fb_info *info,
+					struct nuc900fb_hw *regs)
+{
+	const struct fb_var_screeninfo *var = &info->var;
+	int vtt = var->height + var->upper_margin + var->lower_margin;
+	int htt = var->width + var->left_margin + var->right_margin;
+	int hsync = var->width + var->right_margin;
+	int vsync = var->height + var->lower_margin;
+
+	regs->lcd_crtc_size = LCM_CRTC_SIZE_VTTVAL(vtt) |
+			      LCM_CRTC_SIZE_HTTVAL(htt);
+	regs->lcd_crtc_dend = LCM_CRTC_DEND_VDENDVAL(var->height) |
+			      LCM_CRTC_DEND_HDENDVAL(var->width);
+	regs->lcd_crtc_hr = LCM_CRTC_HR_EVAL(var->width + 5) |
+			    LCM_CRTC_HR_SVAL(var->width + 1);
+	regs->lcd_crtc_hsync = LCM_CRTC_HSYNC_EVAL(hsync + var->hsync_len) |
+			       LCM_CRTC_HSYNC_SVAL(hsync);
+	regs->lcd_crtc_vr = LCM_CRTC_VR_EVAL(vsync + var->vsync_len) |
+			    LCM_CRTC_VR_SVAL(vsync);
+
+}
+
+/*
+ *	Activate (set) the controller from the given framebuffer
+ *	information
+ */
+static void nuc900fb_activate_var(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	void __iomem *regs = fbi->io;
+	struct fb_var_screeninfo *var = &info->var;
+	int clkdiv;
+
+	clkdiv = nuc900fb_calc_pixclk(fbi, var->pixclock) - 1;
+	if (clkdiv < 0)
+		clkdiv = 0;
+
+	nuc900fb_calculate_lcd_regs(info, &fbi->regs);
+
+	/* set the new lcd registers*/
+
+	dev_dbg(fbi->dev, "new lcd register set:\n");
+	dev_dbg(fbi->dev, "dccs       = 0x%08x\n", fbi->regs.lcd_dccs);
+	dev_dbg(fbi->dev, "dev_ctl    = 0x%08x\n", fbi->regs.lcd_device_ctrl);
+	dev_dbg(fbi->dev, "crtc_size  = 0x%08x\n", fbi->regs.lcd_crtc_size);
+	dev_dbg(fbi->dev, "crtc_dend  = 0x%08x\n", fbi->regs.lcd_crtc_dend);
+	dev_dbg(fbi->dev, "crtc_hr    = 0x%08x\n", fbi->regs.lcd_crtc_hr);
+	dev_dbg(fbi->dev, "crtc_hsync = 0x%08x\n", fbi->regs.lcd_crtc_hsync);
+	dev_dbg(fbi->dev, "crtc_vr    = 0x%08x\n", fbi->regs.lcd_crtc_vr);
+
+	writel(fbi->regs.lcd_device_ctrl, regs + REG_LCM_DEV_CTRL);
+	writel(fbi->regs.lcd_crtc_size, regs + REG_LCM_CRTC_SIZE);
+	writel(fbi->regs.lcd_crtc_dend, regs + REG_LCM_CRTC_DEND);
+	writel(fbi->regs.lcd_crtc_hr, regs + REG_LCM_CRTC_HR);
+	writel(fbi->regs.lcd_crtc_hsync, regs + REG_LCM_CRTC_HSYNC);
+	writel(fbi->regs.lcd_crtc_vr, regs + REG_LCM_CRTC_VR);
+
+	/* set lcd address pointers */
+	nuc900fb_set_lcdaddr(info);
+
+	writel(fbi->regs.lcd_dccs, regs + REG_LCM_DCCS);
+}
+
+/*
+ *      Alters the hardware state.
+ *
+ */
+static int nuc900fb_set_par(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+
+	switch (var->bits_per_pixel) {
+	case 32:
+	case 24:
+	case 18:
+	case 16:
+	case 12:
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		break;
+	case 1:
+		info->fix.visual = FB_VISUAL_MONO01;
+		break;
+	default:
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+		break;
+	}
+
+	info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
+
+	/* activate this new configuration */
+	nuc900fb_activate_var(info);
+	return 0;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan,
+					 struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+static int nuc900fb_setcolreg(unsigned regno,
+			       unsigned red, unsigned green, unsigned blue,
+			       unsigned transp, struct fb_info *info)
+{
+	unsigned int val;
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		/* true-colour, use pseuo-palette */
+		if (regno < 16) {
+			u32 *pal = info->pseudo_palette;
+
+			val  = chan_to_field(red, &info->var.red);
+			val |= chan_to_field(green, &info->var.green);
+			val |= chan_to_field(blue, &info->var.blue);
+			pal[regno] = val;
+		}
+		break;
+
+	default:
+		return 1;   /* unknown type */
+	}
+	return 0;
+}
+
+/**
+ *      nuc900fb_blank
+ *
+ */
+static int nuc900fb_blank(int blank_mode, struct fb_info *info)
+{
+
+	return 0;
+}
+
+static struct fb_ops nuc900fb_ops = {
+	.owner			= THIS_MODULE,
+	.fb_check_var		= nuc900fb_check_var,
+	.fb_set_par		= nuc900fb_set_par,
+	.fb_blank		= nuc900fb_blank,
+	.fb_setcolreg		= nuc900fb_setcolreg,
+	.fb_fillrect		= cfb_fillrect,
+	.fb_copyarea		= cfb_copyarea,
+	.fb_imageblit		= cfb_imageblit,
+};
+
+
+static inline void modify_gpio(void __iomem *reg,
+			       unsigned long set, unsigned long mask)
+{
+	unsigned long tmp;
+	tmp = readl(reg) & ~mask;
+	writel(tmp | set, reg);
+}
+
+/*
+ * Initialise LCD-related registers
+ */
+static int nuc900fb_init_registers(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
+	void __iomem *regs = fbi->io;
+
+	/*reset the display engine*/
+	writel(0, regs + REG_LCM_DCCS);
+	writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_ENG_RST,
+	       regs + REG_LCM_DCCS);
+	ndelay(100);
+	writel(readl(regs + REG_LCM_DCCS) & (~LCM_DCCS_ENG_RST),
+	       regs + REG_LCM_DCCS);
+	ndelay(100);
+
+	writel(0, regs + REG_LCM_DEV_CTRL);
+
+	/* config gpio output */
+	modify_gpio(W90X900_VA_GPIO + 0x54, mach_info->gpio_dir,
+		    mach_info->gpio_dir_mask);
+	modify_gpio(W90X900_VA_GPIO + 0x58, mach_info->gpio_data,
+		    mach_info->gpio_data_mask);
+
+	return 0;
+}
+
+
+/*
+ *    Alloc the SDRAM region of NUC900 for the frame buffer.
+ *    The buffer should be a non-cached, non-buffered, memory region
+ *    to allow palette and pixel writes without flushing the cache.
+ */
+static int __init nuc900fb_map_video_memory(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	dma_addr_t map_dma;
+	unsigned long map_size = PAGE_ALIGN(info->fix.smem_len);
+
+	dev_dbg(fbi->dev, "nuc900fb_map_video_memory(fbi=%p) map_size %lu\n",
+		fbi, map_size);
+
+	info->screen_base = dma_alloc_writecombine(fbi->dev, map_size,
+							&map_dma, GFP_KERNEL);
+
+	if (!info->screen_base)
+		return -ENOMEM;
+
+	memset(info->screen_base, 0x00, map_size);
+	info->fix.smem_start = map_dma;
+
+	return 0;
+}
+
+static inline void nuc900fb_unmap_video_memory(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
+			      info->screen_base, info->fix.smem_start);
+}
+
+static irqreturn_t nuc900fb_irqhandler(int irq, void *dev_id)
+{
+	struct nuc900fb_info *fbi = dev_id;
+	void __iomem *regs = fbi->io;
+	void __iomem *irq_base = fbi->irq_base;
+	unsigned long lcdirq = readl(regs + REG_LCM_INT_CS);
+
+	if (lcdirq & LCM_INT_CS_DISP_F_STATUS) {
+		writel(readl(irq_base) | 1<<30, irq_base);
+
+		/* wait VA_EN low */
+		if ((readl(regs + REG_LCM_DCCS) &
+		    LCM_DCCS_SINGLE) == LCM_DCCS_SINGLE)
+			while ((readl(regs + REG_LCM_DCCS) &
+			       LCM_DCCS_VA_EN) == LCM_DCCS_VA_EN)
+				;
+		/* display_out-enable */
+		writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_DISP_OUT_EN,
+			regs + REG_LCM_DCCS);
+		/* va-enable*/
+		writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_VA_EN,
+			regs + REG_LCM_DCCS);
+	} else if (lcdirq & LCM_INT_CS_UNDERRUN_INT) {
+		writel(readl(irq_base) | LCM_INT_CS_UNDERRUN_INT, irq_base);
+	} else if (lcdirq & LCM_INT_CS_BUS_ERROR_INT) {
+		writel(readl(irq_base) | LCM_INT_CS_BUS_ERROR_INT, irq_base);
+	}
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+static int nuc900fb_cpufreq_transition(struct notifier_block *nb,
+				       unsigned long val, void *data)
+{
+	struct nuc900fb_info *info;
+	struct fb_info *fbinfo;
+	long delta_f;
+	info = container_of(nb, struct nuc900fb_info, freq_transition);
+	fbinfo = platform_get_drvdata(to_platform_device(info->dev));
+
+	delta_f = info->clk_rate - clk_get_rate(info->clk);
+
+	if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
+	   (val == CPUFREQ_PRECHANGE && delta_f < 0)) {
+		info->clk_rate = clk_get_rate(info->clk);
+		nuc900fb_activate_var(fbinfo);
+	}
+
+	return 0;
+}
+
+static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
+{
+	fbi->freq_transition.notifier_call = nuc900fb_cpufreq_transition;
+	return cpufreq_register_notifier(&fbi->freq_transition,
+				  CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *fbi)
+{
+	cpufreq_unregister_notifier(&fbi->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+#else
+static inline int nuc900fb_cpufreq_transition(struct notifier_block *nb,
+				       unsigned long val, void *data)
+{
+	return 0;
+}
+
+static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
+{
+	return 0;
+}
+
+static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *info)
+{
+}
+#endif
+
+static char driver_name[] = "nuc900fb";
+
+static int __devinit nuc900fb_probe(struct platform_device *pdev)
+{
+	struct nuc900fb_info *fbi;
+	struct nuc900fb_display *display;
+	struct fb_info	   *fbinfo;
+	struct nuc900fb_mach_info *mach_info;
+	struct resource *res;
+	int ret;
+	int irq;
+	int i;
+	int size;
+
+	dev_dbg(&pdev->dev, "devinit\n");
+	mach_info = pdev->dev.platform_data;
+	if (mach_info == NULL) {
+		dev_err(&pdev->dev,
+			"no platform data for lcd, cannot attach\n");
+		return -EINVAL;
+	}
+
+	if (mach_info->default_display > mach_info->num_displays) {
+		dev_err(&pdev->dev,
+			"default display No. is %d but only %d displays \n",
+			mach_info->default_display, mach_info->num_displays);
+		return -EINVAL;
+	}
+
+
+	display = mach_info->displays + mach_info->default_display;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq for device\n");
+		return -ENOENT;
+	}
+
+	fbinfo = framebuffer_alloc(sizeof(struct nuc900fb_info), &pdev->dev);
+	if (!fbinfo)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, fbinfo);
+
+	fbi = fbinfo->par;
+	fbi->dev = &pdev->dev;
+
+#ifdef CONFIG_CPU_NUC950
+	fbi->drv_type = LCDDRV_NUC950;
+#endif
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	size = (res->end - res->start) + 1;
+	fbi->mem = request_mem_region(res->start, size, pdev->name);
+	if (fbi->mem == NULL) {
+		dev_err(&pdev->dev, "failed to alloc memory region\n");
+		ret = -ENOENT;
+		goto free_fb;
+	}
+
+	fbi->io = ioremap(res->start, size);
+	if (fbi->io == NULL) {
+		dev_err(&pdev->dev, "ioremap() of lcd registers failed\n");
+		ret = -ENXIO;
+		goto release_mem_region;
+	}
+
+	fbi->irq_base = fbi->io + REG_LCM_INT_CS;
+
+
+	/* Stop the LCD */
+	writel(0, fbi->io + REG_LCM_DCCS);
+
+	/* fill the fbinfo*/
+	strcpy(fbinfo->fix.id, driver_name);
+	fbinfo->fix.type		= FB_TYPE_PACKED_PIXELS;
+	fbinfo->fix.type_aux		= 0;
+	fbinfo->fix.xpanstep		= 0;
+	fbinfo->fix.ypanstep		= 0;
+	fbinfo->fix.ywrapstep		= 0;
+	fbinfo->fix.accel		= FB_ACCEL_NONE;
+	fbinfo->var.nonstd		= 0;
+	fbinfo->var.activate		= FB_ACTIVATE_NOW;
+	fbinfo->var.accel_flags		= 0;
+	fbinfo->var.vmode		= FB_VMODE_NONINTERLACED;
+	fbinfo->fbops			= &nuc900fb_ops;
+	fbinfo->flags			= FBINFO_FLAG_DEFAULT;
+	fbinfo->pseudo_palette		= &fbi->pseudo_pal;
+
+	ret = request_irq(irq, nuc900fb_irqhandler, IRQF_DISABLED,
+			  pdev->name, fbinfo);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot register irq handler %d -err %d\n",
+			irq, ret);
+		ret = -EBUSY;
+		goto release_regs;
+	}
+
+	nuc900_driver_clksrc_div(&pdev->dev, "ext", 0x2);
+
+	fbi->clk = clk_get(&pdev->dev, NULL);
+	if (!fbi->clk || IS_ERR(fbi->clk)) {
+		printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n");
+		ret = -ENOENT;
+		goto release_irq;
+	}
+
+	clk_enable(fbi->clk);
+	dev_dbg(&pdev->dev, "got and enabled clock\n");
+
+	fbi->clk_rate = clk_get_rate(fbi->clk);
+
+	/* calutate the video buffer size */
+	for (i = 0; i < mach_info->num_displays; i++) {
+		unsigned long smem_len = mach_info->displays[i].xres;
+		smem_len *= mach_info->displays[i].yres;
+		smem_len *= mach_info->displays[i].bpp;
+		smem_len >>= 3;
+		if (fbinfo->fix.smem_len < smem_len)
+			fbinfo->fix.smem_len = smem_len;
+	}
+
+	/* Initialize Video Memory */
+	ret = nuc900fb_map_video_memory(fbinfo);
+	if (ret) {
+		printk(KERN_ERR "Failed to allocate video RAM: %x\n", ret);
+		goto release_clock;
+	}
+
+	dev_dbg(&pdev->dev, "got video memory\n");
+
+	fbinfo->var.xres = display->xres;
+	fbinfo->var.yres = display->yres;
+	fbinfo->var.bits_per_pixel = display->bpp;
+
+	nuc900fb_init_registers(fbinfo);
+
+	nuc900fb_check_var(&fbinfo->var, fbinfo);
+
+	ret = nuc900fb_cpufreq_register(fbi);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register cpufreq\n");
+		goto free_video_memory;
+	}
+
+	ret = register_framebuffer(fbinfo);
+	if (ret) {
+		printk(KERN_ERR "failed to register framebuffer device: %d\n",
+			ret);
+		goto free_cpufreq;
+	}
+
+	printk(KERN_INFO "fb%d: %s frame buffer device\n",
+		fbinfo->node, fbinfo->fix.id);
+
+	return 0;
+
+free_cpufreq:
+	nuc900fb_cpufreq_deregister(fbi);
+free_video_memory:
+	nuc900fb_unmap_video_memory(fbinfo);
+release_clock:
+	clk_disable(fbi->clk);
+	clk_put(fbi->clk);
+release_irq:
+	free_irq(irq, fbi);
+release_regs:
+	iounmap(fbi->io);
+release_mem_region:
+	release_mem_region((unsigned long)fbi->mem, size);
+free_fb:
+	framebuffer_release(fbinfo);
+	return ret;
+}
+
+/*
+ * shutdown the lcd controller
+ */
+static void nuc900fb_stop_lcd(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	void __iomem *regs = fbi->io;
+
+	writel((~LCM_DCCS_DISP_INT_EN) | (~LCM_DCCS_VA_EN) | (~LCM_DCCS_OSD_EN),
+		regs + REG_LCM_DCCS);
+}
+
+/*
+ *  Cleanup
+ */
+static int nuc900fb_remove(struct platform_device *pdev)
+{
+	struct fb_info *fbinfo = platform_get_drvdata(pdev);
+	struct nuc900fb_info *fbi = fbinfo->par;
+	int irq;
+
+	nuc900fb_stop_lcd(fbinfo);
+	msleep(1);
+
+	nuc900fb_unmap_video_memory(fbinfo);
+
+	iounmap(fbi->io);
+
+	irq = platform_get_irq(pdev, 0);
+	free_irq(irq, fbi);
+
+	release_resource(fbi->mem);
+	kfree(fbi->mem);
+
+	platform_set_drvdata(pdev, NULL);
+	framebuffer_release(fbinfo);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+/*
+ *	suspend and resume support for the lcd controller
+ */
+
+static int nuc900fb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct fb_info	   *fbinfo = platform_get_drvdata(dev);
+	struct nuc900fb_info *info = fbinfo->par;
+
+	nuc900fb_stop_lcd();
+	msleep(1);
+	clk_disable(info->clk);
+	return 0;
+}
+
+static int nuc900fb_resume(struct platform_device *dev)
+{
+	struct fb_info	   *fbinfo = platform_get_drvdata(dev);
+	struct nuc900fb_info *fbi = fbinfo->par;
+
+	printk(KERN_INFO "nuc900fb resume\n");
+
+	clk_enable(fbi->clk);
+	msleep(1);
+
+	nuc900fb_init_registers(fbinfo);
+	nuc900fb_activate_var(bfinfo);
+
+	return 0;
+}
+
+#else
+#define nuc900fb_suspend NULL
+#define nuc900fb_resume  NULL
+#endif
+
+static struct platform_driver nuc900fb_driver = {
+	.probe		= nuc900fb_probe,
+	.remove		= nuc900fb_remove,
+	.suspend	= nuc900fb_suspend,
+	.resume		= nuc900fb_resume,
+	.driver		= {
+		.name	= "nuc900-lcd",
+		.owner	= THIS_MODULE,
+	},
+};
+
+int __devinit nuc900fb_init(void)
+{
+	return platform_driver_register(&nuc900fb_driver);
+}
+
+static void __exit nuc900fb_cleanup(void)
+{
+	platform_driver_unregister(&nuc900fb_driver);
+}
+
+module_init(nuc900fb_init);
+module_exit(nuc900fb_cleanup);
+
+MODULE_DESCRIPTION("Framebuffer driver for the NUC900");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/nuc900fb.h b/drivers/video/nuc900fb.h
new file mode 100644
index 000000000000..6c23aa3d3b89
--- /dev/null
+++ b/drivers/video/nuc900fb.h
@@ -0,0 +1,55 @@
+/*
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *   Auther:
+ *        Wang Qiang(rurality.linux@gmail.com)  2009/12/16
+ */
+
+#ifndef __NUC900FB_H
+#define __NUC900FB_H
+
+#include <mach/map.h>
+#include <mach/fb.h>
+
+enum nuc900_lcddrv_type {
+	LCDDRV_NUC910,
+	LCDDRV_NUC930,
+	LCDDRV_NUC932,
+	LCDDRV_NUC950,
+	LCDDRV_NUC960,
+};
+
+
+#define PALETTE_BUFFER_SIZE	256
+#define PALETTE_BUFF_CLEAR 	(0x80000000) /* entry is clear/invalid */
+
+struct nuc900fb_info {
+	struct device		*dev;
+	struct clk		*clk;
+
+	struct resource		*mem;
+	void __iomem		*io;
+	void __iomem		*irq_base;
+	int 			drv_type;
+	struct nuc900fb_hw	regs;
+	unsigned long		clk_rate;
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block	freq_transition;
+#endif
+
+	/* keep these registers in case we need to re-write palette */
+	u32			palette_buffer[PALETTE_BUFFER_SIZE];
+	u32			pseudo_pal[16];
+};
+
+int nuc900fb_init(void);
+
+#endif /* __NUC900FB_H */
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index a33483910dc8..9557f963662e 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -389,7 +389,7 @@ static int omap_lcdc_enable_plane(int plane, int enable)
 /*
  * Configure the LCD DMA for a palette load operation and do the palette
  * downloading synchronously. We don't use the frame+palette load mode of
- * the controller, since the palette can always be downloaded seperately.
+ * the controller, since the palette can always be downloaded separately.
  */
 static void load_palette(void)
 {
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 913142d4cab1..9acef00c47ea 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -341,7 +341,7 @@ static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
 	return manager_attr->store(manager, buf, size);
 }
 
-static struct sysfs_ops manager_sysfs_ops = {
+static const struct sysfs_ops manager_sysfs_ops = {
 	.show = manager_attr_show,
 	.store = manager_attr_store,
 };
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 0c5bea263ac6..aed3f3194347 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -320,7 +320,7 @@ static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
 	return overlay_attr->store(overlay, buf, size);
 }
 
-static struct sysfs_ops overlay_sysfs_ops = {
+static const struct sysfs_ops overlay_sysfs_ops = {
 	.show = overlay_attr_show,
 	.store = overlay_attr_store,
 };
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 36436ee6c1a4..27f93aab6ddc 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -896,7 +896,7 @@ static int pm2fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	 * Pseudocolor:
 	 *    uses offset = 0 && length = DAC register width.
 	 *    var->{color}.offset is 0
-	 *    var->{color}.length contains widht of DAC
+	 *    var->{color}.length contains width of DAC
 	 *    cmap is not used
 	 *    DAC[X] is programmed to (red, green, blue)
 	 * Truecolor:
diff --git a/drivers/video/q40fb.c b/drivers/video/q40fb.c
index 4beac1df617b..de40a626dc76 100644
--- a/drivers/video/q40fb.c
+++ b/drivers/video/q40fb.c
@@ -85,7 +85,7 @@ static struct fb_ops q40fb_ops = {
 	.fb_imageblit	= cfb_imageblit,
 };
 
-static int __init q40fb_probe(struct platform_device *dev)
+static int __devinit q40fb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index 0deb0a8867b7..7b63429f1a7c 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -517,12 +517,12 @@ s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 		src = (sy * stride) + (bpp * sx);
 	}
 
-	/* set source adress */
+	/* set source address */
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff));
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff);
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff);
 
-	/* set destination adress */
+	/* set destination address */
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff));
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff);
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff);
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index aac661225c78..2b094dec4a56 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -1004,12 +1004,12 @@ dealloc_fb:
 	return ret;
 }
 
-static int __init s3c2410fb_probe(struct platform_device *pdev)
+static int __devinit s3c2410fb_probe(struct platform_device *pdev)
 {
 	return s3c24xxfb_probe(pdev, DRV_S3C2410);
 }
 
-static int __init s3c2412fb_probe(struct platform_device *pdev)
+static int __devinit s3c2412fb_probe(struct platform_device *pdev)
 {
 	return s3c24xxfb_probe(pdev, DRV_S3C2412);
 }
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index cdaa873a6054..e8b76d65a070 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -1435,7 +1435,7 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 	return fbi;
 }
 
-static int __init sa1100fb_probe(struct platform_device *pdev)
+static int __devinit sa1100fb_probe(struct platform_device *pdev)
 {
 	struct sa1100fb_info *fbi;
 	int ret, irq;
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
index f86012239bff..7a3a5e28eca1 100644
--- a/drivers/video/sgivwfb.c
+++ b/drivers/video/sgivwfb.c
@@ -745,7 +745,7 @@ int __init sgivwfb_setup(char *options)
 /*
  *  Initialisation
  */
-static int __init sgivwfb_probe(struct platform_device *dev)
+static int __devinit sgivwfb_probe(struct platform_device *dev)
 {
 	struct sgivw_par *par;
 	struct fb_info *info;
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 8d7653e56df5..bbd1dbf4026a 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -943,7 +943,7 @@ static const struct dev_pm_ops sh_mobile_lcdc_dev_pm_ops = {
 
 static int sh_mobile_lcdc_remove(struct platform_device *pdev);
 
-static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
+static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 {
 	struct fb_info *info;
 	struct sh_mobile_lcdc_priv *priv;
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 9d2b6bc49036..a531a0f7cdf2 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1891,9 +1891,6 @@ static struct fb_ops sisfb_ops = {
 	.fb_fillrect	= fbcon_sis_fillrect,
 	.fb_copyarea	= fbcon_sis_copyarea,
 	.fb_imageblit	= cfb_imageblit,
-#ifdef CONFIG_FB_SOFT_CURSOR
-	.fb_cursor	= soft_cursor,
-#endif
 	.fb_sync	= fbcon_sis_sync,
 #ifdef SIS_NEW_CONFIG_COMPAT
 	.fb_compat_ioctl= sisfb_ioctl,
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 35370d0ecf03..b7dc1800efa9 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -411,7 +411,7 @@ static int sm501fb_set_par_common(struct fb_info *info,
 	struct sm501fb_par  *par = info->par;
 	struct sm501fb_info *fbi = par->info;
 	unsigned long pixclock;      /* pixelclock in Hz */
-	unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */
+	unsigned long sm501pixclock; /* pixelclock the 501 can achieve in Hz */
 	unsigned int mem_type;
 	unsigned int clock_type;
 	unsigned int head_addr;
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index 609d0a521ca2..79840f11fecb 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -1102,7 +1102,7 @@ static void sst_set_vidmod_ics(struct fb_info *info, const int bpp)
  * detect dac type
  * prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset,
  * dram refresh disabled, FbiInit remaped.
- * TODO: mmh.. maybe i shoud put the "prerequisite" in the func ...
+ * TODO: mmh.. maybe i should put the "prerequisite" in the func ...
  */
 
 
diff --git a/drivers/video/sunxvr1000.c b/drivers/video/sunxvr1000.c
new file mode 100644
index 000000000000..a8248c0b9192
--- /dev/null
+++ b/drivers/video/sunxvr1000.c
@@ -0,0 +1,228 @@
+/* sunxvr1000.c: Sun XVR-1000 driver for sparc64 systems
+ *
+ * Copyright (C) 2010 David S. Miller (davem@davemloft.net)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+
+struct gfb_info {
+	struct fb_info		*info;
+
+	char __iomem		*fb_base;
+	unsigned long		fb_base_phys;
+
+	struct device_node	*of_node;
+
+	unsigned int		width;
+	unsigned int		height;
+	unsigned int		depth;
+	unsigned int		fb_size;
+
+	u32			pseudo_palette[16];
+};
+
+static int __devinit gfb_get_props(struct gfb_info *gp)
+{
+	gp->width = of_getintprop_default(gp->of_node, "width", 0);
+	gp->height = of_getintprop_default(gp->of_node, "height", 0);
+	gp->depth = of_getintprop_default(gp->of_node, "depth", 32);
+
+	if (!gp->width || !gp->height) {
+		printk(KERN_ERR "gfb: Critical properties missing for %s\n",
+		       gp->of_node->full_name);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int gfb_setcolreg(unsigned regno,
+			 unsigned red, unsigned green, unsigned blue,
+			 unsigned transp, struct fb_info *info)
+{
+	u32 value;
+
+	if (regno < 16) {
+		red >>= 8;
+		green >>= 8;
+		blue >>= 8;
+
+		value = (blue << 16) | (green << 8) | red;
+		((u32 *)info->pseudo_palette)[regno] = value;
+	}
+
+	return 0;
+}
+
+static struct fb_ops gfb_ops = {
+	.owner			= THIS_MODULE,
+	.fb_setcolreg		= gfb_setcolreg,
+	.fb_fillrect		= cfb_fillrect,
+	.fb_copyarea		= cfb_copyarea,
+	.fb_imageblit		= cfb_imageblit,
+};
+
+static int __devinit gfb_set_fbinfo(struct gfb_info *gp)
+{
+	struct fb_info *info = gp->info;
+	struct fb_var_screeninfo *var = &info->var;
+
+	info->flags = FBINFO_DEFAULT;
+	info->fbops = &gfb_ops;
+	info->screen_base = gp->fb_base;
+	info->screen_size = gp->fb_size;
+
+	info->pseudo_palette = gp->pseudo_palette;
+
+	/* Fill fix common fields */
+	strlcpy(info->fix.id, "gfb", sizeof(info->fix.id));
+        info->fix.smem_start = gp->fb_base_phys;
+        info->fix.smem_len = gp->fb_size;
+        info->fix.type = FB_TYPE_PACKED_PIXELS;
+	if (gp->depth == 32 || gp->depth == 24)
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+	else
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+
+	var->xres = gp->width;
+	var->yres = gp->height;
+	var->xres_virtual = var->xres;
+	var->yres_virtual = var->yres;
+	var->bits_per_pixel = gp->depth;
+
+	var->red.offset = 0;
+	var->red.length = 8;
+	var->green.offset = 8;
+	var->green.length = 8;
+	var->blue.offset = 16;
+	var->blue.length = 8;
+	var->transp.offset = 0;
+	var->transp.length = 0;
+
+	if (fb_alloc_cmap(&info->cmap, 256, 0)) {
+		printk(KERN_ERR "gfb: Cannot allocate color map.\n");
+		return -ENOMEM;
+	}
+
+        return 0;
+}
+
+static int __devinit gfb_probe(struct of_device *op,
+			       const struct of_device_id *match)
+{
+	struct device_node *dp = op->node;
+	struct fb_info *info;
+	struct gfb_info *gp;
+	int err;
+
+	info = framebuffer_alloc(sizeof(struct gfb_info), &op->dev);
+	if (!info) {
+		printk(KERN_ERR "gfb: Cannot allocate fb_info\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	gp = info->par;
+	gp->info = info;
+	gp->of_node = dp;
+
+	gp->fb_base_phys = op->resource[6].start;
+
+	err = gfb_get_props(gp);
+	if (err)
+		goto err_release_fb;
+
+	/* Framebuffer length is the same regardless of resolution. */
+	info->fix.line_length = 16384;
+	gp->fb_size = info->fix.line_length * gp->height;
+
+	gp->fb_base = of_ioremap(&op->resource[6], 0,
+				 gp->fb_size, "gfb fb");
+	if (!gp->fb_base)
+		goto err_release_fb;
+
+	err = gfb_set_fbinfo(gp);
+	if (err)
+		goto err_unmap_fb;
+
+	printk("gfb: Found device at %s\n", dp->full_name);
+
+	err = register_framebuffer(info);
+	if (err < 0) {
+		printk(KERN_ERR "gfb: Could not register framebuffer %s\n",
+		       dp->full_name);
+		goto err_unmap_fb;
+	}
+
+	dev_set_drvdata(&op->dev, info);
+
+	return 0;
+
+err_unmap_fb:
+	of_iounmap(&op->resource[6], gp->fb_base, gp->fb_size);
+
+err_release_fb:
+        framebuffer_release(info);
+
+err_out:
+	return err;
+}
+
+static int __devexit gfb_remove(struct of_device *op)
+{
+	struct fb_info *info = dev_get_drvdata(&op->dev);
+	struct gfb_info *gp = info->par;
+
+	unregister_framebuffer(info);
+
+	iounmap(gp->fb_base);
+
+	of_iounmap(&op->resource[6], gp->fb_base, gp->fb_size);
+
+        framebuffer_release(info);
+
+	dev_set_drvdata(&op->dev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id gfb_match[] = {
+	{
+		.name = "SUNW,gfb",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ffb_match);
+
+static struct of_platform_driver gfb_driver = {
+	.name		= "gfb",
+	.match_table	= gfb_match,
+	.probe		= gfb_probe,
+	.remove		= __devexit_p(gfb_remove),
+};
+
+static int __init gfb_init(void)
+{
+	if (fb_get_options("gfb", NULL))
+		return -ENODEV;
+
+	return of_register_driver(&gfb_driver, &of_bus_type);
+}
+
+static void __exit gfb_exit(void)
+{
+	of_unregister_driver(&gfb_driver);
+}
+
+module_init(gfb_init);
+module_exit(gfb_exit);
+
+MODULE_DESCRIPTION("framebuffer driver for Sun XVR-1000 graphics");
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index bd37ee1f6a25..ef4128c8e57a 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -226,7 +226,7 @@ static int __init vesafb_setup(char *options)
 	return 0;
 }
 
-static int __init vesafb_probe(struct platform_device *dev)
+static int __devinit vesafb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int i, err;
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index 050d432c7d95..b8ab995fbda7 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -479,7 +479,7 @@ static int __init vfb_setup(char *options)
      *  Initialisation
      */
 
-static int __init vfb_probe(struct platform_device *dev)
+static int __devinit vfb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int retval = -ENOMEM;
diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index 5b2938903ac2..76d8dae5b1bb 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -1293,7 +1293,7 @@ static int vga16fb_setup(char *options)
 }
 #endif
 
-static int __init vga16fb_probe(struct platform_device *dev)
+static int __devinit vga16fb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	struct vga16fb_par *par;
diff --git a/drivers/video/via/Makefile b/drivers/video/via/Makefile
index e533b4b6aba4..eeed238ad6a2 100644
--- a/drivers/video/via/Makefile
+++ b/drivers/video/via/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_FB_VIA) += viafb.o
 
-viafb-y	:=viafbdev.o hw.o iface.o  via_i2c.o dvi.o lcd.o ioctl.o accel.o via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o
+viafb-y	:=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o
diff --git a/drivers/video/via/chip.h b/drivers/video/via/chip.h
index 474f428aea92..8c06bd3c0b4d 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/via/chip.h
@@ -107,7 +107,6 @@
 struct tmds_chip_information {
 	int tmds_chip_name;
 	int tmds_chip_slave_addr;
-	int dvi_panel_id;
 	int data_mode;
 	int output_interface;
 	int i2c_port;
@@ -142,14 +141,9 @@ struct tmds_setting_information {
 	int iga_path;
 	int h_active;
 	int v_active;
-	int bpp;
-	int refresh_rate;
-	int get_dvi_size_method;
 	int max_pixel_clock;
-	int dvi_panel_size;
-	int dvi_panel_hres;
-	int dvi_panel_vres;
-	int native_size;
+	int max_hres;
+	int max_vres;
 };
 
 struct lvds_setting_information {
@@ -160,7 +154,6 @@ struct lvds_setting_information {
 	int refresh_rate;
 	int get_lcd_size_method;
 	int lcd_panel_id;
-	int lcd_panel_size;
 	int lcd_panel_hres;
 	int lcd_panel_vres;
 	int display_method;
diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c
index 67b36932212b..abe59b8c7a05 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/via/dvi.c
@@ -23,11 +23,10 @@
 static void tmds_register_write(int index, u8 data);
 static int tmds_register_read(int index);
 static int tmds_register_read_bytes(int index, u8 *buff, int buff_len);
-static int check_reduce_blanking_mode(int mode_index,
-	int refresh_rate);
-static int dvi_get_panel_size_from_DDCv1(void);
-static int dvi_get_panel_size_from_DDCv2(void);
-static unsigned char dvi_get_panel_info(void);
+static void dvi_get_panel_size_from_DDCv1(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting);
+static void dvi_get_panel_size_from_DDCv2(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting);
 static int viafb_dvi_query_EDID(void);
 
 static int check_tmds_chip(int device_id_subaddr, int device_id)
@@ -38,23 +37,24 @@ static int check_tmds_chip(int device_id_subaddr, int device_id)
 		return FAIL;
 }
 
-void viafb_init_dvi_size(void)
+void viafb_init_dvi_size(struct tmds_chip_information *tmds_chip,
+	struct tmds_setting_information *tmds_setting)
 {
 	DEBUG_MSG(KERN_INFO "viafb_init_dvi_size()\n");
-	DEBUG_MSG(KERN_INFO
-		"viaparinfo->tmds_setting_info->get_dvi_size_method %d\n",
-		  viaparinfo->tmds_setting_info->get_dvi_size_method);
 
-	switch (viaparinfo->tmds_setting_info->get_dvi_size_method) {
-	case GET_DVI_SIZE_BY_SYSTEM_BIOS:
+	viafb_dvi_sense();
+	switch (viafb_dvi_query_EDID()) {
+	case 1:
+		dvi_get_panel_size_from_DDCv1(tmds_chip, tmds_setting);
 		break;
-	case GET_DVI_SZIE_BY_HW_STRAPPING:
+	case 2:
+		dvi_get_panel_size_from_DDCv2(tmds_chip, tmds_setting);
 		break;
-	case GET_DVI_SIZE_BY_VGA_BIOS:
 	default:
-		dvi_get_panel_info();
+		printk(KERN_WARNING "viafb_init_dvi_size: DVI panel size undetected!\n");
 		break;
 	}
+
 	return;
 }
 
@@ -189,42 +189,14 @@ static int tmds_register_read_bytes(int index, u8 *buff, int buff_len)
 	return 0;
 }
 
-static int check_reduce_blanking_mode(int mode_index,
-	int refresh_rate)
-{
-	if (refresh_rate != 60)
-		return false;
-
-	switch (mode_index) {
-		/* Following modes have reduce blanking mode. */
-	case VIA_RES_1360X768:
-	case VIA_RES_1400X1050:
-	case VIA_RES_1440X900:
-	case VIA_RES_1600X900:
-	case VIA_RES_1680X1050:
-	case VIA_RES_1920X1080:
-	case VIA_RES_1920X1200:
-		break;
-
-	default:
-		DEBUG_MSG(KERN_INFO
-			  "This dvi mode %d have no reduce blanking mode!\n",
-			  mode_index);
-		return false;
-	}
-
-	return true;
-}
-
 /* DVI Set Mode */
-void viafb_dvi_set_mode(int video_index, int mode_bpp, int set_iga)
+void viafb_dvi_set_mode(struct VideoModeTable *mode, int mode_bpp,
+	int set_iga)
 {
-	struct VideoModeTable *videoMode = NULL;
+	struct VideoModeTable *rb_mode;
 	struct crt_mode_table *pDviTiming;
 	unsigned long desirePixelClock, maxPixelClock;
-	int status = 0;
-	videoMode = viafb_get_modetbl_pointer(video_index);
-	pDviTiming = videoMode->crtc;
+	pDviTiming = mode->crtc;
 	desirePixelClock = pDviTiming->clk / 1000000;
 	maxPixelClock = (unsigned long)viaparinfo->
 		tmds_setting_info->max_pixel_clock;
@@ -232,20 +204,14 @@ void viafb_dvi_set_mode(int video_index, int mode_bpp, int set_iga)
 	DEBUG_MSG(KERN_INFO "\nDVI_set_mode!!\n");
 
 	if ((maxPixelClock != 0) && (desirePixelClock > maxPixelClock)) {
-		/*Check if reduce-blanking mode is exist */
-		status =
-		    check_reduce_blanking_mode(video_index,
-					       pDviTiming->refresh_rate);
-		if (status) {
-			video_index += 100;	/*Use reduce-blanking mode */
-			videoMode = viafb_get_modetbl_pointer(video_index);
-			pDviTiming = videoMode->crtc;
-			DEBUG_MSG(KERN_INFO
-				  "DVI use reduce blanking mode %d!!\n",
-				  video_index);
+		rb_mode = viafb_get_rb_mode(mode->crtc[0].crtc.hor_addr,
+			mode->crtc[0].crtc.ver_addr);
+		if (rb_mode) {
+			mode = rb_mode;
+			pDviTiming = rb_mode->crtc;
 		}
 	}
-	viafb_fill_crtc_timing(pDviTiming, video_index, mode_bpp / 8, set_iga);
+	viafb_fill_crtc_timing(pDviTiming, mode, mode_bpp / 8, set_iga);
 	viafb_set_output_path(DEVICE_DVI, set_iga,
 			viaparinfo->chip_info->tmds_chip_info.output_interface);
 }
@@ -350,25 +316,18 @@ static int viafb_dvi_query_EDID(void)
 		return false;
 }
 
-/*
- *
- * int dvi_get_panel_size_from_DDCv1(void)
- *
- *     - Get Panel Size Using EDID1 Table
- *
- * Return Type:    int
- *
- */
-static int dvi_get_panel_size_from_DDCv1(void)
+/* Get Panel Size Using EDID1 Table */
+static void dvi_get_panel_size_from_DDCv1(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting)
 {
-	int i, max_h = 0, max_v = 0, tmp, restore;
+	int i, max_h = 0, tmp, restore;
 	unsigned char rData;
 	unsigned char EDID_DATA[18];
 
 	DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv1 \n");
 
-	restore = viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr;
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = 0xA0;
+	restore = tmds_chip->tmds_chip_slave_addr;
+	tmds_chip->tmds_chip_slave_addr = 0xA0;
 
 	rData = tmds_register_read(0x23);
 	if (rData & 0x3C)
@@ -414,8 +373,8 @@ static int dvi_get_panel_size_from_DDCv1(void)
 				/* The first two byte must be zero. */
 				if (EDID_DATA[3] == 0xFD) {
 					/* To get max pixel clock. */
-					viaparinfo->tmds_setting_info->
-					max_pixel_clock = EDID_DATA[9] * 10;
+					tmds_setting->max_pixel_clock =
+						EDID_DATA[9] * 10;
 				}
 			}
 			break;
@@ -425,154 +384,88 @@ static int dvi_get_panel_size_from_DDCv1(void)
 		}
 	}
 
+	tmds_setting->max_hres = max_h;
 	switch (max_h) {
 	case 640:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_640X480;
+		tmds_setting->max_vres = 480;
 		break;
 	case 800:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_800X600;
+		tmds_setting->max_vres = 600;
 		break;
 	case 1024:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
+		tmds_setting->max_vres = 768;
 		break;
 	case 1280:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1280X1024;
+		tmds_setting->max_vres = 1024;
 		break;
 	case 1400:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1400X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1440:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1440X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1600:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1600X1200;
+		tmds_setting->max_vres = 1200;
 		break;
 	case 1920:
-		if (max_v == 1200) {
-			viaparinfo->tmds_setting_info->dvi_panel_size =
-				VIA_RES_1920X1200;
-		} else {
-			viaparinfo->tmds_setting_info->dvi_panel_size =
-				VIA_RES_1920X1080;
-		}
-
+		tmds_setting->max_vres = 1080;
 		break;
 	default:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
-		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d !\
-					 set default panel size.\n", max_h);
+		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d ! "
+					 "set default panel size.\n", max_h);
 		break;
 	}
 
 	DEBUG_MSG(KERN_INFO "DVI max pixelclock = %d\n",
-		  viaparinfo->tmds_setting_info->max_pixel_clock);
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = restore;
-	return viaparinfo->tmds_setting_info->dvi_panel_size;
+		tmds_setting->max_pixel_clock);
+	tmds_chip->tmds_chip_slave_addr = restore;
 }
 
-/*
- *
- * int dvi_get_panel_size_from_DDCv2(void)
- *
- *     - Get Panel Size Using EDID2 Table
- *
- * Return Type:    int
- *
- */
-static int dvi_get_panel_size_from_DDCv2(void)
+/* Get Panel Size Using EDID2 Table */
+static void dvi_get_panel_size_from_DDCv2(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting)
 {
-	int HSize = 0, restore;
+	int restore;
 	unsigned char R_Buffer[2];
 
 	DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv2 \n");
 
-	restore = viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr;
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = 0xA2;
+	restore = tmds_chip->tmds_chip_slave_addr;
+	tmds_chip->tmds_chip_slave_addr = 0xA2;
 
 	/* Horizontal: 0x76, 0x77 */
 	tmds_register_read_bytes(0x76, R_Buffer, 2);
-	HSize = R_Buffer[0];
-	HSize += R_Buffer[1] << 8;
+	tmds_setting->max_hres = R_Buffer[0] + (R_Buffer[1] << 8);
 
-	switch (HSize) {
+	switch (tmds_setting->max_hres) {
 	case 640:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_640X480;
+		tmds_setting->max_vres = 480;
 		break;
 	case 800:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_800X600;
+		tmds_setting->max_vres = 600;
 		break;
 	case 1024:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
+		tmds_setting->max_vres = 768;
 		break;
 	case 1280:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1280X1024;
+		tmds_setting->max_vres = 1024;
 		break;
 	case 1400:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1400X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1440:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1440X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1600:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1600X1200;
-		break;
-	default:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
-		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d!\
-					set default panel size.\n", HSize);
-		break;
-	}
-
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = restore;
-	return viaparinfo->tmds_setting_info->dvi_panel_size;
-}
-
-/*
- *
- * unsigned char dvi_get_panel_info(void)
- *
- *     - Get Panel Size
- *
- * Return Type:    unsigned char
- */
-static unsigned char dvi_get_panel_info(void)
-{
-	unsigned char dvipanelsize;
-	DEBUG_MSG(KERN_INFO "dvi_get_panel_info! \n");
-
-	viafb_dvi_sense();
-	switch (viafb_dvi_query_EDID()) {
-	case 1:
-		dvi_get_panel_size_from_DDCv1();
-		break;
-	case 2:
-		dvi_get_panel_size_from_DDCv2();
+		tmds_setting->max_vres = 1200;
 		break;
 	default:
+		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d! "
+			"set default panel size.\n", tmds_setting->max_hres);
 		break;
 	}
 
-	DEBUG_MSG(KERN_INFO "dvi panel size is %2d \n",
-		  viaparinfo->tmds_setting_info->dvi_panel_size);
-	dvipanelsize = (unsigned char)(viaparinfo->
-		tmds_setting_info->dvi_panel_size);
-	return dvipanelsize;
+	tmds_chip->tmds_chip_slave_addr = restore;
 }
 
 /* If Disable DVI, turn off pad */
diff --git a/drivers/video/via/dvi.h b/drivers/video/via/dvi.h
index e1ec37fb0dc3..0dffcfd395f3 100644
--- a/drivers/video/via/dvi.h
+++ b/drivers/video/via/dvi.h
@@ -53,12 +53,13 @@
 #define     DEV_CONNECT_DVI     0x01
 #define     DEV_CONNECT_HDMI    0x02
 
-struct VideoModeTable *viafb_get_cea_mode_tbl_pointer(int Index);
 int viafb_dvi_sense(void);
 void viafb_dvi_disable(void);
 void viafb_dvi_enable(void);
 int viafb_tmds_trasmitter_identify(void);
-void viafb_init_dvi_size(void);
-void viafb_dvi_set_mode(int video_index, int mode_bpp, int set_iga);
+void viafb_init_dvi_size(struct tmds_chip_information *tmds_chip,
+	struct tmds_setting_information *tmds_setting);
+void viafb_dvi_set_mode(struct VideoModeTable *videoMode, int mode_bpp,
+	int set_iga);
 
 #endif /* __DVI_H__ */
diff --git a/drivers/video/via/global.c b/drivers/video/via/global.c
index b675cdbb03ad..1ee511b73307 100644
--- a/drivers/video/via/global.c
+++ b/drivers/video/via/global.c
@@ -23,15 +23,12 @@ int viafb_platform_epia_dvi = STATE_OFF;
 int viafb_device_lcd_dualedge = STATE_OFF;
 int viafb_bus_width = 12;
 int viafb_display_hardware_layout = HW_LAYOUT_LCD_DVI;
-int viafb_memsize;
 int viafb_DeviceStatus = CRT_Device;
 int viafb_hotplug;
 int viafb_refresh = 60;
 int viafb_refresh1 = 60;
 int viafb_lcd_dsp_method = LCD_EXPANDSION;
 int viafb_lcd_mode = LCD_OPENLDI;
-int viafb_bpp = 32;
-int viafb_bpp1 = 32;
 int viafb_CRT_ON = 1;
 int viafb_DVI_ON;
 int viafb_LCD_ON ;
@@ -42,8 +39,6 @@ int viafb_hotplug_Xres = 640;
 int viafb_hotplug_Yres = 480;
 int viafb_hotplug_bpp = 32;
 int viafb_hotplug_refresh = 60;
-unsigned int viafb_second_offset;
-int viafb_second_size;
 int viafb_primary_dev = None_Device;
 unsigned int viafb_second_xres = 640;
 unsigned int viafb_second_yres = 480;
diff --git a/drivers/video/via/global.h b/drivers/video/via/global.h
index d69d0ca99c2f..8d95d5fd1388 100644
--- a/drivers/video/via/global.h
+++ b/drivers/video/via/global.h
@@ -35,7 +35,6 @@
 
 #include "debug.h"
 
-#include "iface.h"
 #include "viafbdev.h"
 #include "chip.h"
 #include "accel.h"
@@ -68,8 +67,6 @@ extern int viafb_refresh;
 extern int viafb_refresh1;
 extern int viafb_lcd_dsp_method;
 extern int viafb_lcd_mode;
-extern int viafb_bpp;
-extern int viafb_bpp1;
 
 extern int viafb_CRT_ON;
 extern int viafb_hotplug_Xres;
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 3e083ff67ae2..f2583b1b527f 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -524,7 +524,6 @@ static void dvi_patch_skew_dvp1(void);
 static void dvi_patch_skew_dvp_low(void);
 static void set_dvi_output_path(int set_iga, int output_interface);
 static void set_lcd_output_path(int set_iga, int output_interface);
-static int search_mode_setting(int ModeInfoIndex);
 static void load_fix_bit_crtc_reg(void);
 static void init_gfx_chip_info(struct pci_dev *pdev,
 				const struct pci_device_id *pdi);
@@ -686,6 +685,84 @@ void viafb_set_secondary_pitch(u32 pitch)
 	viafb_write_reg_mask(0x71, VIACR, (pitch >> (10 - 7)) & 0x80, 0x80);
 }
 
+void viafb_set_primary_color_depth(u8 depth)
+{
+	u8 value;
+
+	DEBUG_MSG(KERN_DEBUG "viafb_set_primary_color_depth(%d)\n", depth);
+	switch (depth) {
+	case 8:
+		value = 0x00;
+		break;
+	case 15:
+		value = 0x04;
+		break;
+	case 16:
+		value = 0x14;
+		break;
+	case 24:
+		value = 0x0C;
+		break;
+	case 30:
+		value = 0x08;
+		break;
+	default:
+		printk(KERN_WARNING "viafb_set_primary_color_depth: "
+			"Unsupported depth: %d\n", depth);
+		return;
+	}
+
+	viafb_write_reg_mask(0x15, VIASR, value, 0x1C);
+}
+
+void viafb_set_secondary_color_depth(u8 depth)
+{
+	u8 value;
+
+	DEBUG_MSG(KERN_DEBUG "viafb_set_secondary_color_depth(%d)\n", depth);
+	switch (depth) {
+	case 8:
+		value = 0x00;
+		break;
+	case 16:
+		value = 0x40;
+		break;
+	case 24:
+		value = 0xC0;
+		break;
+	case 30:
+		value = 0x80;
+		break;
+	default:
+		printk(KERN_WARNING "viafb_set_secondary_color_depth: "
+			"Unsupported depth: %d\n", depth);
+		return;
+	}
+
+	viafb_write_reg_mask(0x67, VIACR, value, 0xC0);
+}
+
+static void set_color_register(u8 index, u8 red, u8 green, u8 blue)
+{
+	outb(0xFF, 0x3C6); /* bit mask of palette */
+	outb(index, 0x3C8);
+	outb(red, 0x3C9);
+	outb(green, 0x3C9);
+	outb(blue, 0x3C9);
+}
+
+void viafb_set_primary_color_register(u8 index, u8 red, u8 green, u8 blue)
+{
+	viafb_write_reg_mask(0x1A, VIASR, 0x00, 0x01);
+	set_color_register(index, red, green, blue);
+}
+
+void viafb_set_secondary_color_register(u8 index, u8 red, u8 green, u8 blue)
+{
+	viafb_write_reg_mask(0x1A, VIASR, 0x01, 0x01);
+	set_color_register(index, red, green, blue);
+}
+
 void viafb_set_output_path(int device, int set_iga, int output_interface)
 {
 	switch (device) {
@@ -710,11 +787,8 @@ static void set_crt_output_path(int set_iga)
 		viafb_write_reg_mask(SR16, VIASR, 0x00, BIT6);
 		break;
 	case IGA2:
-	case IGA1_IGA2:
 		viafb_write_reg_mask(CR6A, VIACR, 0xC0, BIT6 + BIT7);
 		viafb_write_reg_mask(SR16, VIASR, 0x40, BIT6);
-		if (set_iga == IGA1_IGA2)
-			viafb_write_reg_mask(CR6B, VIACR, 0x08, BIT3);
 		break;
 	}
 }
@@ -904,13 +978,6 @@ static void set_lcd_output_path(int set_iga, int output_interface)
 
 		enable_second_display_channel();
 		break;
-
-	case IGA1_IGA2:
-		viafb_write_reg_mask(CR6B, VIACR, 0x08, BIT3);
-		viafb_write_reg_mask(CR6A, VIACR, 0x08, BIT3);
-
-		disable_second_display_channel();
-		break;
 	}
 
 	switch (output_interface) {
@@ -987,49 +1054,6 @@ static void set_lcd_output_path(int set_iga, int output_interface)
 	}
 }
 
-/* Search Mode Index */
-static int search_mode_setting(int ModeInfoIndex)
-{
-	int i = 0;
-
-	while ((i < NUM_TOTAL_MODETABLE) &&
-			(ModeInfoIndex != CLE266Modes[i].ModeIndex))
-		i++;
-	if (i >= NUM_TOTAL_MODETABLE)
-		i = 0;
-	return i;
-
-}
-
-struct VideoModeTable *viafb_get_modetbl_pointer(int Index)
-{
-	struct VideoModeTable *TmpTbl = NULL;
-	TmpTbl = &CLE266Modes[search_mode_setting(Index)];
-	return TmpTbl;
-}
-
-struct VideoModeTable *viafb_get_cea_mode_tbl_pointer(int Index)
-{
-	struct VideoModeTable *TmpTbl = NULL;
-	int i = 0;
-	while ((i < NUM_TOTAL_CEA_MODES) &&
-			(Index != CEA_HDMI_Modes[i].ModeIndex))
-		i++;
-	if ((i < NUM_TOTAL_CEA_MODES))
-		TmpTbl = &CEA_HDMI_Modes[i];
-	 else {
-		/*Still use general timing if don't find CEA timing */
-		i = 0;
-		while ((i < NUM_TOTAL_MODETABLE) &&
-				(Index != CLE266Modes[i].ModeIndex))
-		       i++;
-		if (i >= NUM_TOTAL_MODETABLE)
-			i = 0;
-		TmpTbl = &CLE266Modes[i];
-	}
-	return TmpTbl;
-}
-
 static void load_fix_bit_crtc_reg(void)
 {
 	/* always set to 1 */
@@ -1121,15 +1145,13 @@ void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga)
 	struct io_register *reg = NULL;
 
 	switch (set_iga) {
-	case IGA1_IGA2:
 	case IGA1:
 		reg_value = IGA1_FETCH_COUNT_FORMULA(h_addr, bpp_byte);
 		viafb_load_reg_num = fetch_count_reg.
 			iga1_fetch_count_reg.reg_num;
 		reg = fetch_count_reg.iga1_fetch_count_reg.reg;
 		viafb_load_reg(reg_value, viafb_load_reg_num, reg, VIASR);
-		if (set_iga == IGA1)
-			break;
+		break;
 	case IGA2:
 		reg_value = IGA2_FETCH_COUNT_FORMULA(h_addr, bpp_byte);
 		viafb_load_reg_num = fetch_count_reg.
@@ -1499,7 +1521,7 @@ void viafb_set_vclock(u32 CLK, int set_iga)
 	/* H.W. Reset : ON */
 	viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
 
-	if ((set_iga == IGA1) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA1) {
 		/* Change D,N FOR VCLK */
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
@@ -1528,7 +1550,7 @@ void viafb_set_vclock(u32 CLK, int set_iga)
 		}
 	}
 
-	if ((set_iga == IGA2) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA2) {
 		/* Change D,N FOR LCK */
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
@@ -1557,12 +1579,12 @@ void viafb_set_vclock(u32 CLK, int set_iga)
 	viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
 
 	/* Reset PLL */
-	if ((set_iga == IGA1) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA1) {
 		viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
 		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
 	}
 
-	if ((set_iga == IGA2) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA2) {
 		viafb_write_reg_mask(SR40, VIASR, 0x01, BIT0);
 		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT0);
 	}
@@ -1805,47 +1827,15 @@ void viafb_load_crtc_timing(struct display_timing device_timing,
 	viafb_lock_crt();
 }
 
-void viafb_set_color_depth(int bpp_byte, int set_iga)
-{
-	if (set_iga == IGA1) {
-		switch (bpp_byte) {
-		case MODE_8BPP:
-			viafb_write_reg_mask(SR15, VIASR, 0x22, 0x7E);
-			break;
-		case MODE_16BPP:
-			viafb_write_reg_mask(SR15, VIASR, 0xB6, 0xFE);
-			break;
-		case MODE_32BPP:
-			viafb_write_reg_mask(SR15, VIASR, 0xAE, 0xFE);
-			break;
-		}
-	} else {
-		switch (bpp_byte) {
-		case MODE_8BPP:
-			viafb_write_reg_mask(CR67, VIACR, 0x00, BIT6 + BIT7);
-			break;
-		case MODE_16BPP:
-			viafb_write_reg_mask(CR67, VIACR, 0x40, BIT6 + BIT7);
-			break;
-		case MODE_32BPP:
-			viafb_write_reg_mask(CR67, VIACR, 0xC0, BIT6 + BIT7);
-			break;
-		}
-	}
-}
-
 void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
-	int mode_index, int bpp_byte, int set_iga)
+	struct VideoModeTable *video_mode, int bpp_byte, int set_iga)
 {
-	struct VideoModeTable *video_mode;
 	struct display_timing crt_reg;
 	int i;
 	int index = 0;
 	int h_addr, v_addr;
 	u32 pll_D_N;
 
-	video_mode = &CLE266Modes[search_mode_setting(mode_index)];
-
 	for (i = 0; i < video_mode->mode_array; i++) {
 		index = i;
 
@@ -1858,8 +1848,10 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 
 	/* Mode 640x480 has border, but LCD/DFP didn't have border. */
 	/* So we would delete border. */
-	if ((viafb_LCD_ON | viafb_DVI_ON) && (mode_index == VIA_RES_640X480)
-	    && (viaparinfo->crt_setting_info->refresh_rate == 60)) {
+	if ((viafb_LCD_ON | viafb_DVI_ON)
+	    && video_mode->crtc[0].crtc.hor_addr == 640
+	    && video_mode->crtc[0].crtc.ver_addr == 480
+	    && viaparinfo->crt_setting_info->refresh_rate == 60) {
 		/* The border is 8 pixels. */
 		crt_reg.hor_blank_start = crt_reg.hor_blank_start - 8;
 
@@ -1912,9 +1904,6 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 	    && (viaparinfo->chip_info->gfx_chip_name != UNICHROME_K400))
 		viafb_load_FIFO_reg(set_iga, h_addr, v_addr);
 
-	/* load SR Register About Memory and Color part */
-	viafb_set_color_depth(bpp_byte, set_iga);
-
 	pll_D_N = viafb_get_clk_value(crt_table[index].clk);
 	DEBUG_MSG(KERN_INFO "PLL=%x", pll_D_N);
 	viafb_set_vclock(pll_D_N, set_iga);
@@ -1956,9 +1945,6 @@ void viafb_update_device_setting(int hres, int vres,
 
 		viaparinfo->tmds_setting_info->h_active = hres;
 		viaparinfo->tmds_setting_info->v_active = vres;
-		viaparinfo->tmds_setting_info->bpp = bpp;
-		viaparinfo->tmds_setting_info->refresh_rate =
-			vmode_refresh;
 
 		viaparinfo->lvds_setting_info->h_active = hres;
 		viaparinfo->lvds_setting_info->v_active = vres;
@@ -1975,9 +1961,6 @@ void viafb_update_device_setting(int hres, int vres,
 		if (viaparinfo->tmds_setting_info->iga_path == IGA2) {
 			viaparinfo->tmds_setting_info->h_active = hres;
 			viaparinfo->tmds_setting_info->v_active = vres;
-			viaparinfo->tmds_setting_info->bpp = bpp;
-			viaparinfo->tmds_setting_info->refresh_rate =
-				vmode_refresh;
 		}
 
 		if (viaparinfo->lvds_setting_info->iga_path == IGA2) {
@@ -2076,9 +2059,8 @@ static void init_tmds_chip_info(void)
 
 	DEBUG_MSG(KERN_INFO "TMDS Chip = %d\n",
 		  viaparinfo->chip_info->tmds_chip_info.tmds_chip_name);
-	viaparinfo->tmds_setting_info->get_dvi_size_method =
-		GET_DVI_SIZE_BY_VGA_BIOS;
-	viafb_init_dvi_size();
+	viafb_init_dvi_size(&viaparinfo->shared->chip_info.tmds_chip_info,
+		&viaparinfo->shared->tmds_setting_info);
 }
 
 static void init_lvds_chip_info(void)
@@ -2195,28 +2177,19 @@ static void set_display_channel(void)
 	}
 }
 
-int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
-	int vmode_index1, int hor_res1, int ver_res1, int video_bpp1)
+int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
+	struct VideoModeTable *vmode_tbl1, int video_bpp1)
 {
 	int i, j;
 	int port;
 	u8 value, index, mask;
-	struct VideoModeTable *vmode_tbl;
 	struct crt_mode_table *crt_timing;
-	struct VideoModeTable *vmode_tbl1 = NULL;
 	struct crt_mode_table *crt_timing1 = NULL;
 
-	DEBUG_MSG(KERN_INFO "Set Mode!!\n");
-	DEBUG_MSG(KERN_INFO
-		  "vmode_index=%d hor_res=%d ver_res=%d video_bpp=%d\n",
-		  vmode_index, hor_res, ver_res, video_bpp);
-
 	device_screen_off();
-	vmode_tbl = &CLE266Modes[search_mode_setting(vmode_index)];
 	crt_timing = vmode_tbl->crtc;
 
 	if (viafb_SAMM_ON == 1) {
-		vmode_tbl1 = &CLE266Modes[search_mode_setting(vmode_index1)];
 		crt_timing1 = vmode_tbl1->crtc;
 	}
 
@@ -2267,12 +2240,11 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 		outb(VPIT.SR[i - 1], VIASR + 1);
 	}
 
-	viafb_set_primary_address(0);
-	viafb_set_secondary_address(viafb_SAMM_ON ? viafb_second_offset : 0);
+	viafb_write_reg_mask(0x15, VIASR, 0xA2, 0xA2);
 	viafb_set_iga_path();
 
 	/* Write CRTC */
-	viafb_fill_crtc_timing(crt_timing, vmode_index, video_bpp / 8, IGA1);
+	viafb_fill_crtc_timing(crt_timing, vmode_tbl, video_bpp / 8, IGA1);
 
 	/* Write Graphic Controller */
 	for (i = 0; i < StdGR; i++) {
@@ -2292,65 +2264,25 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 
 	/* Update Patch Register */
 
-	if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
-	    || (viaparinfo->chip_info->gfx_chip_name == UNICHROME_K400)) {
-		for (i = 0; i < NUM_TOTAL_PATCH_MODE; i++) {
-			if (res_patch_table[i].mode_index == vmode_index) {
-				for (j = 0;
-				     j < res_patch_table[i].table_length; j++) {
-					index =
-					    res_patch_table[i].
-					    io_reg_table[j].index;
-					port =
-					    res_patch_table[i].
-					    io_reg_table[j].port;
-					value =
-					    res_patch_table[i].
-					    io_reg_table[j].value;
-					mask =
-					    res_patch_table[i].
-					    io_reg_table[j].mask;
-					viafb_write_reg_mask(index, port, value,
-						       mask);
-				}
-			}
-		}
-	}
-
-	if (viafb_SAMM_ON == 1) {
-		if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
-		    || (viaparinfo->chip_info->gfx_chip_name ==
-		    UNICHROME_K400)) {
-			for (i = 0; i < NUM_TOTAL_PATCH_MODE; i++) {
-				if (res_patch_table[i].mode_index ==
-				    vmode_index1) {
-					for (j = 0;
-					     j <
-					     res_patch_table[i].
-					     table_length; j++) {
-						index =
-						    res_patch_table[i].
-						    io_reg_table[j].index;
-						port =
-						    res_patch_table[i].
-						    io_reg_table[j].port;
-						value =
-						    res_patch_table[i].
-						    io_reg_table[j].value;
-						mask =
-						    res_patch_table[i].
-						    io_reg_table[j].mask;
-						viafb_write_reg_mask(index,
-							port, value, mask);
-					}
-				}
-			}
+	if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266
+	    || viaparinfo->chip_info->gfx_chip_name == UNICHROME_K400)
+	    && vmode_tbl->crtc[0].crtc.hor_addr == 1024
+	    && vmode_tbl->crtc[0].crtc.ver_addr == 768) {
+		for (j = 0; j < res_patch_table[0].table_length; j++) {
+			index = res_patch_table[0].io_reg_table[j].index;
+			port = res_patch_table[0].io_reg_table[j].port;
+			value = res_patch_table[0].io_reg_table[j].value;
+			mask = res_patch_table[0].io_reg_table[j].mask;
+			viafb_write_reg_mask(index, port, value, mask);
 		}
 	}
 
 	viafb_set_primary_pitch(viafbinfo->fix.line_length);
 	viafb_set_secondary_pitch(viafb_dual_fb ? viafbinfo1->fix.line_length
 		: viafbinfo->fix.line_length);
+	viafb_set_primary_color_depth(viaparinfo->depth);
+	viafb_set_secondary_color_depth(viafb_dual_fb ? viaparinfo1->depth
+		: viaparinfo->depth);
 	/* Update Refresh Rate Setting */
 
 	/* Clear On Screen */
@@ -2359,11 +2291,11 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 	if (viafb_CRT_ON) {
 		if (viafb_SAMM_ON && (viaparinfo->crt_setting_info->iga_path ==
 			IGA2)) {
-			viafb_fill_crtc_timing(crt_timing1, vmode_index1,
+			viafb_fill_crtc_timing(crt_timing1, vmode_tbl1,
 				video_bpp1 / 8,
 				viaparinfo->crt_setting_info->iga_path);
 		} else {
-			viafb_fill_crtc_timing(crt_timing, vmode_index,
+			viafb_fill_crtc_timing(crt_timing, vmode_tbl,
 				video_bpp / 8,
 				viaparinfo->crt_setting_info->iga_path);
 		}
@@ -2373,7 +2305,7 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 		/* Patch if set_hres is not 8 alignment (1366) to viafb_setmode
 		to 8 alignment (1368),there is several pixels (2 pixels)
 		on right side of screen. */
-		if (hor_res % 8) {
+		if (vmode_tbl->crtc[0].crtc.hor_addr % 8) {
 			viafb_unlock_crt();
 			viafb_write_reg(CR02, VIACR,
 				viafb_read_reg(VIACR, CR02) - 1);
@@ -2384,14 +2316,14 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 	if (viafb_DVI_ON) {
 		if (viafb_SAMM_ON &&
 			(viaparinfo->tmds_setting_info->iga_path == IGA2)) {
-			viafb_dvi_set_mode(viafb_get_mode_index
+			viafb_dvi_set_mode(viafb_get_mode
 				     (viaparinfo->tmds_setting_info->h_active,
 				      viaparinfo->tmds_setting_info->
 				      v_active),
 				     video_bpp1, viaparinfo->
 				     tmds_setting_info->iga_path);
 		} else {
-			viafb_dvi_set_mode(viafb_get_mode_index
+			viafb_dvi_set_mode(viafb_get_mode
 				     (viaparinfo->tmds_setting_info->h_active,
 				      viaparinfo->
 				      tmds_setting_info->v_active),
@@ -2445,8 +2377,8 @@ int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
 
 	/* If set mode normally, save resolution information for hot-plug . */
 	if (!viafb_hotplug) {
-		viafb_hotplug_Xres = hor_res;
-		viafb_hotplug_Yres = ver_res;
+		viafb_hotplug_Xres = vmode_tbl->crtc[0].crtc.hor_addr;
+		viafb_hotplug_Yres = vmode_tbl->crtc[0].crtc.ver_addr;
 		viafb_hotplug_bpp = video_bpp;
 		viafb_hotplug_refresh = viafb_refresh;
 
@@ -2706,13 +2638,11 @@ void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
 
 /*According var's xres, yres fill var's other timing information*/
 void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
-			  int mode_index)
+	struct VideoModeTable *vmode_tbl)
 {
-	struct VideoModeTable *vmode_tbl = NULL;
 	struct crt_mode_table *crt_timing = NULL;
 	struct display_timing crt_reg;
 	int i = 0, index = 0;
-	vmode_tbl = &CLE266Modes[search_mode_setting(mode_index)];
 	crt_timing = vmode_tbl->crtc;
 	for (i = 0; i < vmode_tbl->mode_array; i++) {
 		index = i;
@@ -2721,36 +2651,6 @@ void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
 	}
 
 	crt_reg = crt_timing[index].crtc;
-	switch (var->bits_per_pixel) {
-	case 8:
-		var->red.offset = 0;
-		var->green.offset = 0;
-		var->blue.offset = 0;
-		var->red.length = 6;
-		var->green.length = 6;
-		var->blue.length = 6;
-		break;
-	case 16:
-		var->red.offset = 11;
-		var->green.offset = 5;
-		var->blue.offset = 0;
-		var->red.length = 5;
-		var->green.length = 6;
-		var->blue.length = 5;
-		break;
-	case 32:
-		var->red.offset = 16;
-		var->green.offset = 8;
-		var->blue.offset = 0;
-		var->red.length = 8;
-		var->green.length = 8;
-		var->blue.length = 8;
-		break;
-	default:
-		/* never happed, put here to keep consistent */
-		break;
-	}
-
 	var->pixclock = viafb_get_pixclock(var->xres, var->yres, refresh);
 	var->left_margin =
 	    crt_reg.hor_total - (crt_reg.hor_sync_start + crt_reg.hor_sync_end);
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index b874d952b446..12ef32d334cb 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -22,6 +22,7 @@
 #ifndef __HW_H__
 #define __HW_H__
 
+#include "viamode.h"
 #include "global.h"
 
 /***************************************************
@@ -862,8 +863,6 @@ struct pci_device_id_info {
 };
 
 extern unsigned int viafb_second_virtual_xres;
-extern unsigned int viafb_second_offset;
-extern int viafb_second_size;
 extern int viafb_SAMM_ON;
 extern int viafb_dual_fb;
 extern int viafb_LCD2_ON;
@@ -874,8 +873,9 @@ extern int viafb_hotplug;
 void viafb_write_reg_mask(u8 index, int io_port, u8 data, u8 mask);
 void viafb_set_output_path(int device, int set_iga,
 	int output_interface);
+
 void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
-		      int mode_index, int bpp_byte, int set_iga);
+	struct VideoModeTable *video_mode, int bpp_byte, int set_iga);
 
 void viafb_set_vclock(u32 CLK, int set_iga);
 void viafb_load_reg(int timing_value, int viafb_load_reg_num,
@@ -891,16 +891,15 @@ void viafb_lock_crt(void);
 void viafb_unlock_crt(void);
 void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga);
 void viafb_write_regx(struct io_reg RegTable[], int ItemNum);
-struct VideoModeTable *viafb_get_modetbl_pointer(int Index);
 u32 viafb_get_clk_value(int clk);
 void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active);
-void viafb_set_color_depth(int bpp_byte, int set_iga);
 void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
 					*p_gfx_dpa_setting);
 
-int viafb_setmode(int vmode_index, int hor_res, int ver_res,
-	    int video_bpp, int vmode_index1, int hor_res1,
-	    int ver_res1, int video_bpp1);
+int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
+	struct VideoModeTable *vmode_tbl1, int video_bpp1);
+void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
+	struct VideoModeTable *vmode_tbl);
 void viafb_init_chip_info(struct pci_dev *pdev,
 			  const struct pci_device_id *pdi);
 void viafb_init_dac(int set_iga);
@@ -915,6 +914,8 @@ void viafb_set_primary_address(u32 addr);
 void viafb_set_secondary_address(u32 addr);
 void viafb_set_primary_pitch(u32 pitch);
 void viafb_set_secondary_pitch(u32 pitch);
+void viafb_set_primary_color_register(u8 index, u8 red, u8 green, u8 blue);
+void viafb_set_secondary_color_register(u8 index, u8 red, u8 green, u8 blue);
 void viafb_get_fb_info(unsigned int *fb_base, unsigned int *fb_len);
 
 #endif /* __HW_H__ */
diff --git a/drivers/video/via/iface.c b/drivers/video/via/iface.c
deleted file mode 100644
index 1570636c8d51..000000000000
--- a/drivers/video/via/iface.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
- * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
- * the implied warranty of MERCHANTABILITY or FITNESS FOR
- * A PARTICULAR PURPOSE.See the GNU General Public License
- * for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include "global.h"
-
-/* Get frame buffer size from VGA BIOS */
-
-unsigned int viafb_get_memsize(void)
-{
-	unsigned int m;
-
-	/* If memory size provided by user */
-	if (viafb_memsize)
-		m = viafb_memsize * Mb;
-	else {
-		m = (unsigned int)viafb_read_reg(VIASR, SR39);
-		m = m * (4 * Mb);
-
-		if ((m < (16 * Mb)) || (m > (64 * Mb)))
-			m = 16 * Mb;
-	}
-	DEBUG_MSG(KERN_INFO "framebuffer size = %d Mb\n", m / Mb);
-	return m;
-}
-
-/* Get Video Buffer Starting Physical Address(back door)*/
-
-unsigned long viafb_get_videobuf_addr(void)
-{
-	struct pci_dev *pdev = NULL;
-	unsigned char sys_mem;
-	unsigned char video_mem;
-	unsigned long sys_mem_size;
-	unsigned long video_mem_size;
-	/*system memory = 256 MB, video memory 64 MB */
-	unsigned long vmem_starting_adr = 0x0C000000;
-
-	pdev =
-	    (struct pci_dev *)pci_get_device(VIA_K800_BRIDGE_VID,
-					     VIA_K800_BRIDGE_DID, NULL);
-	if (pdev != NULL) {
-		pci_read_config_byte(pdev, VIA_K800_SYSTEM_MEMORY_REG,
-				     &sys_mem);
-		pci_read_config_byte(pdev, VIA_K800_VIDEO_MEMORY_REG,
-				     &video_mem);
-		video_mem = (video_mem & 0x70) >> 4;
-		sys_mem_size = ((unsigned long)sys_mem) << 24;
-		if (video_mem != 0)
-			video_mem_size = (1 << (video_mem)) * 1024 * 1024;
-		else
-			video_mem_size = 0;
-
-		vmem_starting_adr = sys_mem_size - video_mem_size;
-		pci_dev_put(pdev);
-	}
-
-	DEBUG_MSG(KERN_INFO "Video Memory Starting Address = %lx \n",
-		  vmem_starting_adr);
-	return vmem_starting_adr;
-}
diff --git a/drivers/video/via/iface.h b/drivers/video/via/iface.h
deleted file mode 100644
index 790ec3e3aea2..000000000000
--- a/drivers/video/via/iface.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
- * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
- * the implied warranty of MERCHANTABILITY or FITNESS FOR
- * A PARTICULAR PURPOSE.See the GNU General Public License
- * for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __IFACE_H__
-#define __IFACE_H__
-
-#define Kb  (1024)
-#define Mb  (Kb*Kb)
-
-#define VIA_K800_BRIDGE_VID         0x1106
-#define VIA_K800_BRIDGE_DID         0x3204
-
-#define VIA_K800_SYSTEM_MEMORY_REG  0x47
-#define VIA_K800_VIDEO_MEMORY_REG   0xA1
-
-extern int viafb_memsize;
-unsigned int viafb_get_memsize(void);
-unsigned long viafb_get_videobuf_addr(void);
-
-#endif /* __IFACE_H__ */
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 09353e2b92f6..1b1ccdc2d83d 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -22,25 +22,7 @@
 #include "global.h"
 #include "lcdtbl.h"
 
-static struct iga2_shadow_crtc_timing iga2_shadow_crtc_reg = {
-	/* IGA2 Shadow Horizontal Total */
-	{IGA2_SHADOW_HOR_TOTAL_REG_NUM, {{CR6D, 0, 7}, {CR71, 3, 3} } },
-	/* IGA2 Shadow Horizontal Blank End */
-	{IGA2_SHADOW_HOR_BLANK_END_REG_NUM, {{CR6E, 0, 7} } },
-	/* IGA2 Shadow Vertical Total */
-	{IGA2_SHADOW_VER_TOTAL_REG_NUM, {{CR6F, 0, 7}, {CR71, 0, 2} } },
-	/* IGA2 Shadow Vertical Addressable Video */
-	{IGA2_SHADOW_VER_ADDR_REG_NUM, {{CR70, 0, 7}, {CR71, 4, 6} } },
-	/* IGA2 Shadow Vertical Blank Start */
-	{IGA2_SHADOW_VER_BLANK_START_REG_NUM,
-	 {{CR72, 0, 7}, {CR74, 4, 6} } },
-	/* IGA2 Shadow Vertical Blank End */
-	{IGA2_SHADOW_VER_BLANK_END_REG_NUM, {{CR73, 0, 7}, {CR74, 0, 2} } },
-	/* IGA2 Shadow Vertical Sync Start */
-	{IGA2_SHADOW_VER_SYNC_START_REG_NUM, {{CR75, 0, 7}, {CR76, 4, 6} } },
-	/* IGA2 Shadow Vertical Sync End */
-	{IGA2_SHADOW_VER_SYNC_END_REG_NUM, {{CR76, 0, 3} } }
-};
+#define viafb_compact_res(x, y) (((x)<<16)|(y))
 
 static struct _lcd_scaling_factor lcd_scaling_factor = {
 	/* LCD Horizontal Scaling Factor Register */
@@ -59,16 +41,10 @@ static struct _lcd_scaling_factor lcd_scaling_factor_CLE = {
 
 static int check_lvds_chip(int device_id_subaddr, int device_id);
 static bool lvds_identify_integratedlvds(void);
-static int fp_id_to_vindex(int panel_id);
+static void fp_id_to_vindex(int panel_id);
 static int lvds_register_read(int index);
 static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 		      int panel_vres);
-static void load_lcd_k400_patch_tbl(int set_hres, int set_vres,
-	int panel_id);
-static void load_lcd_p880_patch_tbl(int set_hres, int set_vres,
-	int panel_id);
-static void load_lcd_patch_regs(int set_hres, int set_vres,
-	int panel_id, int set_iga);
 static void via_pitch_alignment_patch_lcd(
 	struct lvds_setting_information *plvds_setting_info,
 				   struct lvds_chip_information
@@ -98,8 +74,6 @@ static void check_diport_of_integrated_lvds(
 static struct display_timing lcd_centering_timging(struct display_timing
 					    mode_crt_reg,
 					   struct display_timing panel_crt_reg);
-static void load_crtc_shadow_timing(struct display_timing mode_timing,
-			     struct display_timing panel_timing);
 static void viafb_load_scaling_factor_for_p4m900(int set_hres,
 	int set_vres, int panel_hres, int panel_vres);
 
@@ -125,33 +99,24 @@ void viafb_init_lcd_size(void)
 		break;
 	case GET_LCD_SIZE_BY_VGA_BIOS:
 		DEBUG_MSG(KERN_INFO "Get LCD Size method by VGA BIOS !!\n");
-		viaparinfo->lvds_setting_info->lcd_panel_size =
-		    fp_id_to_vindex(viafb_lcd_panel_id);
+		fp_id_to_vindex(viafb_lcd_panel_id);
 		DEBUG_MSG(KERN_INFO "LCD Panel_ID = %d\n",
 			  viaparinfo->lvds_setting_info->lcd_panel_id);
-		DEBUG_MSG(KERN_INFO "LCD Panel Size = %d\n",
-			  viaparinfo->lvds_setting_info->lcd_panel_size);
 		break;
 	case GET_LCD_SIZE_BY_USER_SETTING:
 		DEBUG_MSG(KERN_INFO "Get LCD Size method by user setting !!\n");
-		viaparinfo->lvds_setting_info->lcd_panel_size =
-		    fp_id_to_vindex(viafb_lcd_panel_id);
+		fp_id_to_vindex(viafb_lcd_panel_id);
 		DEBUG_MSG(KERN_INFO "LCD Panel_ID = %d\n",
 			  viaparinfo->lvds_setting_info->lcd_panel_id);
-		DEBUG_MSG(KERN_INFO "LCD Panel Size = %d\n",
-			  viaparinfo->lvds_setting_info->lcd_panel_size);
 		break;
 	default:
 		DEBUG_MSG(KERN_INFO "viafb_init_lcd_size fail\n");
 		viaparinfo->lvds_setting_info->lcd_panel_id =
 			LCD_PANEL_ID1_800X600;
-		viaparinfo->lvds_setting_info->lcd_panel_size =
-		    fp_id_to_vindex(LCD_PANEL_ID1_800X600);
+		fp_id_to_vindex(LCD_PANEL_ID1_800X600);
 	}
 	viaparinfo->lvds_setting_info2->lcd_panel_id =
 		viaparinfo->lvds_setting_info->lcd_panel_id;
-	viaparinfo->lvds_setting_info2->lcd_panel_size =
-		viaparinfo->lvds_setting_info->lcd_panel_size;
 	viaparinfo->lvds_setting_info2->lcd_panel_hres =
 		viaparinfo->lvds_setting_info->lcd_panel_hres;
 	viaparinfo->lvds_setting_info2->lcd_panel_vres =
@@ -171,13 +136,13 @@ static bool lvds_identify_integratedlvds(void)
 		if (viaparinfo->chip_info->lvds_chip_info.lvds_chip_name) {
 			viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name =
 			    INTEGRATED_LVDS;
-			DEBUG_MSG(KERN_INFO "Support two dual channel LVDS!\
-				  (Internal LVDS + External LVDS)\n");
+			DEBUG_MSG(KERN_INFO "Support two dual channel LVDS! "
+				  "(Internal LVDS + External LVDS)\n");
 		} else {
 			viaparinfo->chip_info->lvds_chip_info.lvds_chip_name =
 			    INTEGRATED_LVDS;
-			DEBUG_MSG(KERN_INFO "Not found external LVDS,\
-				  so can't support two dual channel LVDS!\n");
+			DEBUG_MSG(KERN_INFO "Not found external LVDS, "
+				  "so can't support two dual channel LVDS!\n");
 		}
 	} else if (viafb_display_hardware_layout == HW_LAYOUT_LCD1_LCD2) {
 		/* Two single channel LCD (Internal LVDS + Internal LVDS): */
@@ -185,8 +150,8 @@ static bool lvds_identify_integratedlvds(void)
 		INTEGRATED_LVDS;
 		viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name =
 			INTEGRATED_LVDS;
-		DEBUG_MSG(KERN_INFO "Support two single channel LVDS!\
-			  (Internal LVDS + Internal LVDS)\n");
+		DEBUG_MSG(KERN_INFO "Support two single channel LVDS! "
+			  "(Internal LVDS + Internal LVDS)\n");
 	} else if (viafb_display_hardware_layout != HW_LAYOUT_DVI_ONLY) {
 		/* If we have found external LVDS, just use it,
 		   otherwise, we will use internal LVDS as default. */
@@ -248,7 +213,7 @@ int viafb_lvds_trasmitter_identify(void)
 	return FAIL;
 }
 
-static int fp_id_to_vindex(int panel_id)
+static void fp_id_to_vindex(int panel_id)
 {
 	DEBUG_MSG(KERN_INFO "fp_get_panel_id()\n");
 
@@ -264,7 +229,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID0_640X480;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_640X480;
 		break;
 	case 0x1:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 800;
@@ -273,7 +237,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID1_800X600;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_800X600;
 		break;
 	case 0x2:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -282,7 +245,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1024X768;
 		break;
 	case 0x3:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -291,7 +253,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X768;
 		break;
 	case 0x4:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -300,7 +261,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID4_1280X1024;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X1024;
 		break;
 	case 0x5:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1400;
@@ -309,7 +269,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID5_1400X1050;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1400X1050;
 		break;
 	case 0x6:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1600;
@@ -318,7 +277,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID6_1600X1200;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1600X1200;
 		break;
 	case 0x8:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 800;
@@ -327,7 +285,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_IDA_800X480;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_800X480;
 		break;
 	case 0x9:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -336,7 +293,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1024X768;
 		break;
 	case 0xA:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -345,7 +301,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1024X768;
 		break;
 	case 0xB:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -354,7 +309,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1024X768;
 		break;
 	case 0xC:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -363,7 +317,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1280X768;
 		break;
 	case 0xD:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -372,7 +325,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID4_1280X1024;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1280X1024;
 		break;
 	case 0xE:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1400;
@@ -381,7 +333,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID5_1400X1050;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1400X1050;
 		break;
 	case 0xF:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1600;
@@ -390,7 +341,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID6_1600X1200;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1600X1200;
 		break;
 	case 0x10:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1366;
@@ -399,7 +349,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID7_1366X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1368X768;
 		break;
 	case 0x11:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -408,7 +357,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID8_1024X600;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1024X600;
 		break;
 	case 0x12:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -417,7 +365,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X768;
 		break;
 	case 0x13:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -426,7 +373,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID9_1280X800;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X800;
 		break;
 	case 0x14:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1360;
@@ -435,7 +381,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_IDB_1360X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1360X768;
 		break;
 	case 0x15:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -444,7 +389,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1280X768;
 		break;
 	case 0x16:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 480;
@@ -453,7 +397,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_IDC_480X640;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_480X640;
 		break;
 	default:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 800;
@@ -462,7 +405,6 @@ static int fp_id_to_vindex(int panel_id)
 			LCD_PANEL_ID1_800X600;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_800X600;
 	}
 }
 
@@ -573,284 +515,6 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 	}
 }
 
-static void load_lcd_k400_patch_tbl(int set_hres, int set_vres,
-	int panel_id)
-{
-	int vmode_index;
-	int reg_num = 0;
-	struct io_reg *lcd_patch_reg = NULL;
-
-	vmode_index = viafb_get_mode_index(set_hres, set_vres);
-	switch (panel_id) {
-		/* LCD 800x600 */
-	case LCD_PANEL_ID1_800X600:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_8X6;
-			lcd_patch_reg = K400_LCD_RES_6X4_8X6;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_8X6;
-			lcd_patch_reg = K400_LCD_RES_7X4_8X6;
-			break;
-		}
-		break;
-
-		/* LCD 1024x768 */
-	case LCD_PANEL_ID2_1024X768:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_10X7;
-			lcd_patch_reg = K400_LCD_RES_6X4_10X7;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_10X7;
-			lcd_patch_reg = K400_LCD_RES_7X4_10X7;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_10X7;
-			lcd_patch_reg = K400_LCD_RES_8X6_10X7;
-			break;
-		}
-		break;
-
-		/* LCD 1280x1024 */
-	case LCD_PANEL_ID4_1280X1024:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_12X10;
-			lcd_patch_reg = K400_LCD_RES_6X4_12X10;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_12X10;
-			lcd_patch_reg = K400_LCD_RES_7X4_12X10;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_12X10;
-			lcd_patch_reg = K400_LCD_RES_8X6_12X10;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_12X10;
-			lcd_patch_reg = K400_LCD_RES_10X7_12X10;
-			break;
-
-		}
-		break;
-
-		/* LCD 1400x1050 */
-	case LCD_PANEL_ID5_1400X1050:
-		switch (vmode_index) {
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_14X10;
-			lcd_patch_reg = K400_LCD_RES_6X4_14X10;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_14X10;
-			lcd_patch_reg = K400_LCD_RES_8X6_14X10;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_14X10;
-			lcd_patch_reg = K400_LCD_RES_10X7_14X10;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X800:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_K400_LCD_RES_12X10_14X10;
-			lcd_patch_reg = K400_LCD_RES_12X10_14X10;
-			break;
-		}
-		break;
-
-		/* LCD 1600x1200 */
-	case LCD_PANEL_ID6_1600X1200:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_16X12;
-			lcd_patch_reg = K400_LCD_RES_6X4_16X12;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_16X12;
-			lcd_patch_reg = K400_LCD_RES_7X4_16X12;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_16X12;
-			lcd_patch_reg = K400_LCD_RES_8X6_16X12;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_16X12;
-			lcd_patch_reg = K400_LCD_RES_10X7_16X12;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X800:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_K400_LCD_RES_12X10_16X12;
-			lcd_patch_reg = K400_LCD_RES_12X10_16X12;
-			break;
-		}
-		break;
-
-		/* LCD 1366x768 */
-	case LCD_PANEL_ID7_1366X768:
-		switch (vmode_index) {
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_1366X7;
-			lcd_patch_reg = K400_LCD_RES_6X4_1366X7;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_1366X7;
-			lcd_patch_reg = K400_LCD_RES_7X4_1366X7;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_1366X7;
-			lcd_patch_reg = K400_LCD_RES_8X6_1366X7;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_1366X7;
-			lcd_patch_reg = K400_LCD_RES_10X7_1366X7;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X800:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_K400_LCD_RES_12X10_1366X7;
-			lcd_patch_reg = K400_LCD_RES_12X10_1366X7;
-			break;
-		}
-		break;
-
-		/* LCD 1360x768 */
-	case LCD_PANEL_IDB_1360X768:
-		break;
-	}
-	if (reg_num != 0) {
-		/* H.W. Reset : ON */
-		viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
-
-		viafb_write_regx(lcd_patch_reg, reg_num);
-
-		/* H.W. Reset : OFF */
-		viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
-
-		/* Reset PLL */
-		viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
-		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
-
-		/* Fire! */
-		outb(inb(VIARMisc) | (BIT2 + BIT3), VIAWMisc);
-	}
-}
-
-static void load_lcd_p880_patch_tbl(int set_hres, int set_vres,
-	int panel_id)
-{
-	int vmode_index;
-	int reg_num = 0;
-	struct io_reg *lcd_patch_reg = NULL;
-
-	vmode_index = viafb_get_mode_index(set_hres, set_vres);
-
-	switch (panel_id) {
-	case LCD_PANEL_ID5_1400X1050:
-		switch (vmode_index) {
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_P880_LCD_RES_6X4_14X10;
-			lcd_patch_reg = P880_LCD_RES_6X4_14X10;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_P880_LCD_RES_8X6_14X10;
-			lcd_patch_reg = P880_LCD_RES_8X6_14X10;
-			break;
-		}
-		break;
-	case LCD_PANEL_ID6_1600X1200:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_P880_LCD_RES_6X4_16X12;
-			lcd_patch_reg = P880_LCD_RES_6X4_16X12;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_P880_LCD_RES_7X4_16X12;
-			lcd_patch_reg = P880_LCD_RES_7X4_16X12;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_P880_LCD_RES_8X6_16X12;
-			lcd_patch_reg = P880_LCD_RES_8X6_16X12;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_P880_LCD_RES_10X7_16X12;
-			lcd_patch_reg = P880_LCD_RES_10X7_16X12;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_P880_LCD_RES_12X10_16X12;
-			lcd_patch_reg = P880_LCD_RES_12X10_16X12;
-			break;
-		}
-		break;
-
-	}
-	if (reg_num != 0) {
-		/* H.W. Reset : ON */
-		viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
-
-		viafb_write_regx(lcd_patch_reg, reg_num);
-
-		/* H.W. Reset : OFF */
-		viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
-
-		/* Reset PLL */
-		viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
-		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
-
-		/* Fire! */
-		outb(inb(VIARMisc) | (BIT2 + BIT3), VIAWMisc);
-	}
-}
-
-static void load_lcd_patch_regs(int set_hres, int set_vres,
-	int panel_id, int set_iga)
-{
-	int vmode_index;
-
-	vmode_index = viafb_get_mode_index(set_hres, set_vres);
-
-	viafb_unlock_crt();
-
-	/* Patch for simultaneous & Expansion */
-	if ((set_iga == IGA1_IGA2) &&
-		(viaparinfo->lvds_setting_info->display_method ==
-	    LCD_EXPANDSION)) {
-		switch (viaparinfo->chip_info->gfx_chip_name) {
-		case UNICHROME_CLE266:
-		case UNICHROME_K400:
-			load_lcd_k400_patch_tbl(set_hres, set_vres, panel_id);
-			break;
-		case UNICHROME_K800:
-			break;
-		case UNICHROME_PM800:
-		case UNICHROME_CN700:
-		case UNICHROME_CX700:
-			load_lcd_p880_patch_tbl(set_hres, set_vres, panel_id);
-		}
-	}
-
-	viafb_lock_crt();
-}
-
 static void via_pitch_alignment_patch_lcd(
 	struct lvds_setting_information *plvds_setting_info,
 				   struct lvds_chip_information
@@ -949,29 +613,25 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
 		  struct lvds_setting_information *plvds_setting_info,
 		  struct lvds_chip_information *plvds_chip_info)
 {
-	int video_index = plvds_setting_info->lcd_panel_size;
 	int set_iga = plvds_setting_info->iga_path;
 	int mode_bpp = plvds_setting_info->bpp;
-	int set_hres, set_vres;
-	int panel_hres, panel_vres;
+	int set_hres = plvds_setting_info->h_active;
+	int set_vres = plvds_setting_info->v_active;
+	int panel_hres = plvds_setting_info->lcd_panel_hres;
+	int panel_vres = plvds_setting_info->lcd_panel_vres;
 	u32 pll_D_N;
-	int offset;
 	struct display_timing mode_crt_reg, panel_crt_reg;
 	struct crt_mode_table *panel_crt_table = NULL;
-	struct VideoModeTable *vmode_tbl = NULL;
+	struct VideoModeTable *vmode_tbl = viafb_get_mode(panel_hres,
+		panel_vres);
 
 	DEBUG_MSG(KERN_INFO "viafb_lcd_set_mode!!\n");
 	/* Get mode table */
 	mode_crt_reg = mode_crt_table->crtc;
 	/* Get panel table Pointer */
-	vmode_tbl = viafb_get_modetbl_pointer(video_index);
 	panel_crt_table = vmode_tbl->crtc;
 	panel_crt_reg = panel_crt_table->crtc;
 	DEBUG_MSG(KERN_INFO "bellow viafb_lcd_set_mode!!\n");
-	set_hres = plvds_setting_info->h_active;
-	set_vres = plvds_setting_info->v_active;
-	panel_hres = plvds_setting_info->lcd_panel_hres;
-	panel_vres = plvds_setting_info->lcd_panel_vres;
 	if (VT1636_LVDS == plvds_chip_info->lvds_chip_name)
 		viafb_init_lvds_vt1636(plvds_setting_info, plvds_chip_info);
 	plvds_setting_info->vclk = panel_crt_table->clk;
@@ -1001,54 +661,12 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
 		}
 	}
 
-	if (set_iga == IGA1_IGA2) {
-		load_crtc_shadow_timing(mode_crt_reg, panel_crt_reg);
-		/* Fill shadow registers */
-
-		switch (plvds_setting_info->lcd_panel_id) {
-		case LCD_PANEL_ID0_640X480:
-			offset = 80;
-			break;
-		case LCD_PANEL_ID1_800X600:
-		case LCD_PANEL_IDA_800X480:
-			offset = 110;
-			break;
-		case LCD_PANEL_ID2_1024X768:
-			offset = 150;
-			break;
-		case LCD_PANEL_ID3_1280X768:
-		case LCD_PANEL_ID4_1280X1024:
-		case LCD_PANEL_ID5_1400X1050:
-		case LCD_PANEL_ID9_1280X800:
-			offset = 190;
-			break;
-		case LCD_PANEL_ID6_1600X1200:
-			offset = 250;
-			break;
-		case LCD_PANEL_ID7_1366X768:
-		case LCD_PANEL_IDB_1360X768:
-			offset = 212;
-			break;
-		default:
-			offset = 140;
-			break;
-		}
-
-		/* Offset for simultaneous */
-		viafb_set_secondary_pitch(offset << 3);
-		DEBUG_MSG(KERN_INFO "viafb_load_reg!!\n");
-		viafb_load_fetch_count_reg(set_hres, 4, IGA2);
-		/* Fetch count for simultaneous */
-	} else {		/* SAMM */
-		/* Fetch count for IGA2 only */
-		viafb_load_fetch_count_reg(set_hres, mode_bpp / 8, set_iga);
-
-		if ((viaparinfo->chip_info->gfx_chip_name != UNICHROME_CLE266)
-		    && (viaparinfo->chip_info->gfx_chip_name != UNICHROME_K400))
-			viafb_load_FIFO_reg(set_iga, set_hres, set_vres);
+	/* Fetch count for IGA2 only */
+	viafb_load_fetch_count_reg(set_hres, mode_bpp / 8, set_iga);
 
-		viafb_set_color_depth(mode_bpp / 8, set_iga);
-	}
+	if ((viaparinfo->chip_info->gfx_chip_name != UNICHROME_CLE266)
+		&& (viaparinfo->chip_info->gfx_chip_name != UNICHROME_K400))
+		viafb_load_FIFO_reg(set_iga, set_hres, set_vres);
 
 	fill_lcd_format();
 
@@ -1065,11 +683,6 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
 	    || (UNICHROME_K8M890 == viaparinfo->chip_info->gfx_chip_name))
 		viafb_write_reg_mask(CR6A, VIACR, 0x01, BIT0);
 
-	load_lcd_patch_regs(set_hres, set_vres,
-			    plvds_setting_info->lcd_panel_id, set_iga);
-
-	DEBUG_MSG(KERN_INFO "load_lcd_patch_regs!!\n");
-
 	/* Patch for non 32bit alignment mode */
 	via_pitch_alignment_patch_lcd(plvds_setting_info, plvds_chip_info);
 }
@@ -1283,8 +896,7 @@ void viafb_lcd_enable(void)
 		viafb_write_reg_mask(CR6A, VIACR, 0x48, 0x48);
 	}
 
-	if ((viaparinfo->lvds_setting_info->iga_path == IGA1)
-	    || (viaparinfo->lvds_setting_info->iga_path == IGA1_IGA2)) {
+	if (viaparinfo->lvds_setting_info->iga_path == IGA1) {
 		/* CRT path set to IGA2    */
 		viafb_write_reg_mask(SR16, VIASR, 0x40, 0x40);
 		/* IGA2 path disabled      */
@@ -1476,210 +1088,6 @@ static struct display_timing lcd_centering_timging(struct display_timing
 	return crt_reg;
 }
 
-static void load_crtc_shadow_timing(struct display_timing mode_timing,
-			     struct display_timing panel_timing)
-{
-	struct io_register *reg = NULL;
-	int i;
-	int viafb_load_reg_Num = 0;
-	int reg_value = 0;
-
-	if (viaparinfo->lvds_setting_info->display_method == LCD_EXPANDSION) {
-		/* Expansion */
-		for (i = 12; i < 20; i++) {
-			switch (i) {
-			case H_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_TOTAL_SHADOW_FORMULA
-				    (panel_timing.hor_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.hor_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.hor_total_shadow.reg;
-				break;
-			case H_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.hor_blank_start,
-				     panel_timing.hor_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg;
-				break;
-			case V_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_TOTAL_SHADOW_FORMULA
-				    (panel_timing.ver_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_total_shadow.reg;
-				break;
-			case V_ADDR_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_ADDR_SHADOW_FORMULA
-				    (panel_timing.ver_addr);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_addr_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_addr_shadow.reg;
-				break;
-			case V_BLANK_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_START_SHADOW_FORMULA
-				    (panel_timing.ver_blank_start);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg;
-				break;
-			case V_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.ver_blank_start,
-				     panel_timing.ver_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg;
-				break;
-			case V_SYNC_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_START_SHADOW_FORMULA
-				    (panel_timing.ver_sync_start);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_start_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_start_shadow.reg;
-				break;
-			case V_SYNC_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_END_SHADOW_FORMULA
-				    (panel_timing.ver_sync_start,
-				     panel_timing.ver_sync_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_end_shadow.reg;
-				break;
-			}
-			viafb_load_reg(reg_value,
-				viafb_load_reg_Num, reg, VIACR);
-		}
-	} else {		/* Centering */
-		for (i = 12; i < 20; i++) {
-			switch (i) {
-			case H_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_TOTAL_SHADOW_FORMULA
-				    (panel_timing.hor_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.hor_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.hor_total_shadow.reg;
-				break;
-			case H_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.hor_blank_start,
-				     panel_timing.hor_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg;
-				break;
-			case V_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_TOTAL_SHADOW_FORMULA
-				    (panel_timing.ver_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_total_shadow.reg;
-				break;
-			case V_ADDR_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_ADDR_SHADOW_FORMULA
-				    (mode_timing.ver_addr);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_addr_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_addr_shadow.reg;
-				break;
-			case V_BLANK_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_START_SHADOW_FORMULA
-				    (mode_timing.ver_blank_start);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg;
-				break;
-			case V_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.ver_blank_start,
-				     panel_timing.ver_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg;
-				break;
-			case V_SYNC_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_START_SHADOW_FORMULA(
-				    (panel_timing.ver_sync_start -
-				    panel_timing.ver_blank_start) +
-				    (panel_timing.ver_addr -
-				    mode_timing.ver_addr) / 2 +
-				    mode_timing.ver_addr);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_sync_start_shadow.
-				    reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.ver_sync_start_shadow.
-				    reg;
-				break;
-			case V_SYNC_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_END_SHADOW_FORMULA(
-				    (panel_timing.ver_sync_start -
-				    panel_timing.ver_blank_start) +
-				    (panel_timing.ver_addr -
-				    mode_timing.ver_addr) / 2 +
-				    mode_timing.ver_addr,
-				    panel_timing.ver_sync_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_sync_end_shadow.
-				    reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.ver_sync_end_shadow.
-				    reg;
-				break;
-			}
-			viafb_load_reg(reg_value,
-				viafb_load_reg_Num, reg, VIACR);
-		}
-	}
-}
-
 bool viafb_lcd_get_mobile_state(bool *mobile)
 {
 	unsigned char *romptr, *tableptr;
diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h
index 7cd03e2a1275..d55aaa7b912c 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/via/share.h
@@ -43,61 +43,6 @@
 /* Video Memory Size */
 #define VIDEO_MEMORY_SIZE_16M    0x1000000
 
-/* Definition Mode Index
-*/
-#define     VIA_RES_640X480                 	0
-#define     VIA_RES_800X600                 	1
-#define     VIA_RES_1024X768                	2
-#define     VIA_RES_1152X864                	3
-#define     VIA_RES_1280X1024               	4
-#define     VIA_RES_1600X1200               	5
-#define     VIA_RES_1440X1050               	6
-#define     VIA_RES_1280X768                	7
-#define     VIA_RES_1280X960                	8
-#define     VIA_RES_1920X1440               	9
-#define     VIA_RES_848X480                 	10
-#define     VIA_RES_1400X1050               	11
-#define     VIA_RES_720X480                 	12
-#define     VIA_RES_720X576                 	13
-#define     VIA_RES_1024X512                	14
-#define     VIA_RES_856X480                 	15
-#define     VIA_RES_1024X576                	16
-#define     VIA_RES_640X400                 	17
-#define     VIA_RES_1280X720                	18
-#define     VIA_RES_1920X1080               	19
-#define     VIA_RES_800X480                 	20
-#define     VIA_RES_1368X768                	21
-#define     VIA_RES_1024X600                	22
-#define     VIA_RES_1280X800                	23
-#define     VIA_RES_1680X1050               	24
-#define     VIA_RES_960X600			25
-#define     VIA_RES_1000X600               	26
-#define     VIA_RES_1088X612               	27
-#define     VIA_RES_1152X720               	28
-#define     VIA_RES_1200X720               	29
-#define     VIA_RES_1280X600               	30
-#define     VIA_RES_1360X768               	31
-#define     VIA_RES_1366X768               	32
-#define     VIA_RES_1440X900               	33
-#define     VIA_RES_1600X900               	34
-#define     VIA_RES_1600X1024              	35
-#define     VIA_RES_1792X1344              	36
-#define     VIA_RES_1856X1392              	37
-#define     VIA_RES_1920X1200              	38
-#define     VIA_RES_2048X1536              	39
-#define     VIA_RES_480X640                  	40
-
-/*Reduce Blanking*/
-#define     VIA_RES_1360X768_RB          	131
-#define     VIA_RES_1440X900_RB          	133
-#define     VIA_RES_1400X1050_RB        	111
-#define     VIA_RES_1600X900_RB          	134
-#define     VIA_RES_1680X1050_RB        	124
-#define     VIA_RES_1920X1080_RB        	119
-#define     VIA_RES_1920X1200_RB        	138
-
-#define     VIA_RES_INVALID                 	255
-
 /* standard VGA IO port
 */
 #define VIARMisc    0x3CC
@@ -118,7 +63,6 @@
 /* Display path */
 #define IGA1        1
 #define IGA2        2
-#define IGA1_IGA2   3
 
 /* Define Color Depth  */
 #define MODE_8BPP       1
diff --git a/drivers/video/via/via_utility.c b/drivers/video/via/via_utility.c
index d53c3d54ed8e..aefdeeec89b1 100644
--- a/drivers/video/via/via_utility.c
+++ b/drivers/video/via/via_utility.c
@@ -239,15 +239,3 @@ void viafb_get_gamma_support_state(int bpp, unsigned int *support_state)
 	else
 		*support_state = CRT_Device | DVI_Device | LCD_Device;
 }
-
-int viafb_input_parameter_converter(int parameter_value)
-{
-	int result;
-
-	if (parameter_value >= 1 && parameter_value <= 9)
-		result = 1 << (parameter_value - 1);
-	else
-		result = 1;
-
-	return result;
-}
diff --git a/drivers/video/via/via_utility.h b/drivers/video/via/via_utility.h
index 2fd455202ebd..1670ba82143f 100644
--- a/drivers/video/via/via_utility.h
+++ b/drivers/video/via/via_utility.h
@@ -30,6 +30,5 @@ bool viafb_lcd_get_support_expand_state(u32 xres, u32 yres);
 void viafb_set_gamma_table(int bpp, unsigned int *gamma_table);
 void viafb_get_gamma_table(unsigned int *gamma_table);
 void viafb_get_gamma_support_state(int bpp, unsigned int *support_state);
-int viafb_input_parameter_converter(int parameter_value);
 
 #endif /* __VIAUTILITY_H__ */
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 3028e7ddc3b5..ce7783b63f6a 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -26,18 +26,22 @@
 
 #include "global.h"
 
-static struct fb_var_screeninfo default_var;
 static char *viafb_name = "Via";
 static u32 pseudo_pal[17];
 
 /* video mode */
-static char *viafb_mode = "640x480";
-static char *viafb_mode1 = "640x480";
+static char *viafb_mode;
+static char *viafb_mode1;
+static int viafb_bpp = 32;
+static int viafb_bpp1 = 32;
+
+static unsigned int viafb_second_offset;
+static int viafb_second_size;
 
 static int viafb_accel = 1;
 
 /* Added for specifying active devices.*/
-char *viafb_active_dev = "";
+char *viafb_active_dev;
 
 /*Added for specify lcd output port*/
 char *viafb_lcd_port = "";
@@ -50,18 +54,78 @@ static void apply_second_mode_setting(struct fb_var_screeninfo
 	*sec_var);
 static void retrieve_device_setting(struct viafb_ioctl_setting
 	*setting_info);
+static int viafb_pan_display(struct fb_var_screeninfo *var,
+	struct fb_info *info);
 
 static struct fb_ops viafb_ops;
 
 
+static void viafb_fill_var_color_info(struct fb_var_screeninfo *var, u8 depth)
+{
+	var->grayscale = 0;
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+	var->transp.offset = 0;
+	var->transp.length = 0;
+	var->transp.msb_right = 0;
+	var->nonstd = 0;
+	switch (depth) {
+	case 8:
+		var->bits_per_pixel = 8;
+		var->red.offset = 0;
+		var->green.offset = 0;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		break;
+	case 15:
+		var->bits_per_pixel = 16;
+		var->red.offset = 10;
+		var->green.offset = 5;
+		var->blue.offset = 0;
+		var->red.length = 5;
+		var->green.length = 5;
+		var->blue.length = 5;
+		break;
+	case 16:
+		var->bits_per_pixel = 16;
+		var->red.offset = 11;
+		var->green.offset = 5;
+		var->blue.offset = 0;
+		var->red.length = 5;
+		var->green.length = 6;
+		var->blue.length = 5;
+		break;
+	case 24:
+		var->bits_per_pixel = 32;
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		break;
+	case 30:
+		var->bits_per_pixel = 32;
+		var->red.offset = 20;
+		var->green.offset = 10;
+		var->blue.offset = 0;
+		var->red.length = 10;
+		var->green.length = 10;
+		var->blue.length = 10;
+		break;
+	}
+}
+
 static void viafb_update_fix(struct fb_info *info)
 {
 	u32 bpp = info->var.bits_per_pixel;
 
 	info->fix.visual =
 		bpp == 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
-	info->fix.line_length =
-		((info->var.xres_virtual + 7) & ~7) * bpp / 8;
+	info->fix.line_length = (info->var.xres_virtual * bpp / 8 + 7) & ~7;
 }
 
 static void viafb_setup_fixinfo(struct fb_fix_screeninfo *fix,
@@ -75,6 +139,7 @@ static void viafb_setup_fixinfo(struct fb_fix_screeninfo *fix,
 
 	fix->type = FB_TYPE_PACKED_PIXELS;
 	fix->type_aux = 0;
+	fix->visual = FB_VISUAL_TRUECOLOR;
 
 	fix->xpanstep = fix->ywrapstep = 0;
 	fix->ypanstep = 1;
@@ -97,9 +162,10 @@ static int viafb_release(struct fb_info *info, int user)
 static int viafb_check_var(struct fb_var_screeninfo *var,
 	struct fb_info *info)
 {
-	int vmode_index, htotal, vtotal;
+	int htotal, vtotal, depth;
+	struct VideoModeTable *vmode_entry;
 	struct viafb_par *ppar = info->par;
-	u32 long_refresh;
+	u32 long_refresh, line;
 
 	DEBUG_MSG(KERN_INFO "viafb_check_var!\n");
 	/* Sanity check */
@@ -107,26 +173,36 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
 	if (var->vmode & FB_VMODE_INTERLACED || var->vmode & FB_VMODE_DOUBLE)
 		return -EINVAL;
 
-	vmode_index = viafb_get_mode_index(var->xres, var->yres);
-	if (vmode_index == VIA_RES_INVALID) {
+	vmode_entry = viafb_get_mode(var->xres, var->yres);
+	if (!vmode_entry) {
 		DEBUG_MSG(KERN_INFO
 			  "viafb: Mode %dx%dx%d not supported!!\n",
 			  var->xres, var->yres, var->bits_per_pixel);
 		return -EINVAL;
 	}
 
-	if (24 == var->bits_per_pixel)
-		var->bits_per_pixel = 32;
+	depth = fb_get_color_depth(var, &info->fix);
+	if (!depth)
+		depth = var->bits_per_pixel;
 
-	if (var->bits_per_pixel != 8 && var->bits_per_pixel != 16 &&
-		var->bits_per_pixel != 32)
+	if (depth < 0 || depth > 32)
 		return -EINVAL;
+	else if (!depth)
+		depth = 24;
+	else if (depth == 15 && viafb_dual_fb && ppar->iga_path == IGA1)
+		depth = 15;
+	else if (depth == 30)
+		depth = 30;
+	else if (depth <= 8)
+		depth = 8;
+	else if (depth <= 16)
+		depth = 16;
+	else
+		depth = 24;
 
-	if ((var->xres_virtual * (var->bits_per_pixel >> 3)) & 0x1F)
-		/*32 pixel alignment */
-		var->xres_virtual = (var->xres_virtual + 31) & ~31;
-	if (var->xres_virtual * var->yres_virtual * var->bits_per_pixel / 8 >
-		ppar->memsize)
+	viafb_fill_var_color_info(var, depth);
+	line = (var->xres_virtual * var->bits_per_pixel / 8 + 7) & ~7;
+	if (line * var->yres_virtual > ppar->memsize)
 		return -EINVAL;
 
 	/* Based on var passed in to calculate the refresh,
@@ -142,7 +218,7 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
 	viafb_refresh = viafb_get_refresh(var->xres, var->yres, long_refresh);
 
 	/* Adjust var according to our driver's own table */
-	viafb_fill_var_timing_info(var, viafb_refresh, vmode_index);
+	viafb_fill_var_timing_info(var, viafb_refresh, vmode_entry);
 	if (info->var.accel_flags & FB_ACCELF_TEXT &&
 		!ppar->shared->engine_mmio)
 		info->var.accel_flags = 0;
@@ -153,39 +229,45 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
 static int viafb_set_par(struct fb_info *info)
 {
 	struct viafb_par *viapar = info->par;
-	int vmode_index;
-	int vmode_index1 = 0;
+	struct VideoModeTable *vmode_entry, *vmode_entry1 = NULL;
 	DEBUG_MSG(KERN_INFO "viafb_set_par!\n");
 
 	viapar->depth = fb_get_color_depth(&info->var, &info->fix);
-	viafb_update_device_setting(info->var.xres, info->var.yres,
-			      info->var.bits_per_pixel, viafb_refresh, 0);
+	viafb_update_device_setting(viafbinfo->var.xres, viafbinfo->var.yres,
+		viafbinfo->var.bits_per_pixel, viafb_refresh, 0);
 
-	vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres);
-
-	if (viafb_SAMM_ON == 1) {
+	vmode_entry = viafb_get_mode(viafbinfo->var.xres, viafbinfo->var.yres);
+	if (viafb_dual_fb) {
+		vmode_entry1 = viafb_get_mode(viafbinfo1->var.xres,
+			viafbinfo1->var.yres);
+		viafb_update_device_setting(viafbinfo1->var.xres,
+			viafbinfo1->var.yres, viafbinfo1->var.bits_per_pixel,
+			viafb_refresh1, 1);
+	} else if (viafb_SAMM_ON == 1) {
 		DEBUG_MSG(KERN_INFO
 		"viafb_second_xres = %d, viafb_second_yres = %d, bpp = %d\n",
 			  viafb_second_xres, viafb_second_yres, viafb_bpp1);
-		vmode_index1 = viafb_get_mode_index(viafb_second_xres,
+		vmode_entry1 = viafb_get_mode(viafb_second_xres,
 			viafb_second_yres);
-		DEBUG_MSG(KERN_INFO "->viafb_SAMM_ON: index=%d\n",
-			vmode_index1);
 
 		viafb_update_device_setting(viafb_second_xres,
 			viafb_second_yres, viafb_bpp1, viafb_refresh1, 1);
 	}
 
-	if (vmode_index != VIA_RES_INVALID) {
+	if (vmode_entry) {
 		viafb_update_fix(info);
-		viafb_bpp = info->var.bits_per_pixel;
+		if (viafb_dual_fb && viapar->iga_path == IGA2)
+			viafb_bpp1 = info->var.bits_per_pixel;
+		else
+			viafb_bpp = info->var.bits_per_pixel;
+
 		if (info->var.accel_flags & FB_ACCELF_TEXT)
 			info->flags &= ~FBINFO_HWACCEL_DISABLED;
 		else
 			info->flags |= FBINFO_HWACCEL_DISABLED;
-		viafb_setmode(vmode_index, info->var.xres, info->var.yres,
-			info->var.bits_per_pixel, vmode_index1,
-			viafb_second_xres, viafb_second_yres, viafb_bpp1);
+		viafb_setmode(vmode_entry, info->var.bits_per_pixel,
+			vmode_entry1, viafb_bpp1);
+		viafb_pan_display(&info->var, info);
 	}
 
 	return 0;
@@ -195,234 +277,52 @@ static int viafb_set_par(struct fb_info *info)
 static int viafb_setcolreg(unsigned regno, unsigned red, unsigned green,
 unsigned blue, unsigned transp, struct fb_info *info)
 {
-	u8 sr1a, sr1b, cr67, cr6a, rev = 0, shift = 10;
-	unsigned cmap_entries = (info->var.bits_per_pixel == 8) ? 256 : 16;
-	DEBUG_MSG(KERN_INFO "viafb_setcolreg!\n");
-	if (regno >= cmap_entries)
-		return 1;
-	if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name) {
-		/*
-		 * Read PCI bus 0,dev 0,function 0,index 0xF6 to get chip rev.
-		 */
-		outl(0x80000000 | (0xf6 & ~3), (unsigned long)0xCF8);
-		rev = (inl((unsigned long)0xCFC) >> ((0xf6 & 3) * 8)) & 0xff;
-	}
-	switch (info->var.bits_per_pixel) {
-	case 8:
-		outb(0x1A, 0x3C4);
-		sr1a = inb(0x3C5);
-		outb(0x1B, 0x3C4);
-		sr1b = inb(0x3C5);
-		outb(0x67, 0x3D4);
-		cr67 = inb(0x3D5);
-		outb(0x6A, 0x3D4);
-		cr6a = inb(0x3D5);
-
-		/* Map the 3C6/7/8/9 to the IGA2 */
-		outb(0x1A, 0x3C4);
-		outb(sr1a | 0x01, 0x3C5);
-		/* Second Display Engine colck always on */
-		outb(0x1B, 0x3C4);
-		outb(sr1b | 0x80, 0x3C5);
-		/* Second Display Color Depth 8 */
-		outb(0x67, 0x3D4);
-		outb(cr67 & 0x3F, 0x3D5);
-		outb(0x6A, 0x3D4);
-		/* Second Display Channel Reset CR6A[6]) */
-		outb(cr6a & 0xBF, 0x3D5);
-		/* Second Display Channel Enable CR6A[7] */
-		outb(cr6a | 0x80, 0x3D5);
-		/* Second Display Channel stop reset) */
-		outb(cr6a | 0x40, 0x3D5);
-
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		/* Write one register of IGA2 */
-		outb(regno, 0x3C8);
-		if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name &&
-			rev >= 15) {
-			shift = 8;
-			viafb_write_reg_mask(CR6A, VIACR, BIT5, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, BIT7, BIT7);
-		} else {
-			shift = 10;
-			viafb_write_reg_mask(CR6A, VIACR, 0, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, 0, BIT7);
-		}
-		outb(red >> shift, 0x3C9);
-		outb(green >> shift, 0x3C9);
-		outb(blue >> shift, 0x3C9);
-
-		/* Map the 3C6/7/8/9 to the IGA1 */
-		outb(0x1A, 0x3C4);
-		outb(sr1a & 0xFE, 0x3C5);
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		/* Write one register of IGA1 */
-		outb(regno, 0x3C8);
-		outb(red >> shift, 0x3C9);
-		outb(green >> shift, 0x3C9);
-		outb(blue >> shift, 0x3C9);
-
-		outb(0x1A, 0x3C4);
-		outb(sr1a, 0x3C5);
-		outb(0x1B, 0x3C4);
-		outb(sr1b, 0x3C5);
-		outb(0x67, 0x3D4);
-		outb(cr67, 0x3D5);
-		outb(0x6A, 0x3D4);
-		outb(cr6a, 0x3D5);
-		break;
-	case 16:
-		((u32 *) info->pseudo_palette)[regno] = (red & 0xF800) |
-		    ((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
-		break;
-	case 32:
-		((u32 *) info->pseudo_palette)[regno] =
-		    ((transp & 0xFF00) << 16) |
-		    ((red & 0xFF00) << 8) |
-		    ((green & 0xFF00)) | ((blue & 0xFF00) >> 8);
-		break;
-	}
-
-	return 0;
+	struct viafb_par *viapar = info->par;
+	u32 r, g, b;
 
-}
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) {
+		if (regno > 255)
+			return -EINVAL;
 
-/*CALLED BY: fb_set_cmap */
-/*           fb_set_var, pass 256 colors */
-/*CALLED BY: fb_set_cmap */
-/*           fbcon_set_palette, pass 16 colors */
-static int viafb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
-{
-	u32 len = cmap->len;
-	u32 i;
-	u16 *pred = cmap->red;
-	u16 *pgreen = cmap->green;
-	u16 *pblue = cmap->blue;
-	u16 *ptransp = cmap->transp;
-	u8 sr1a, sr1b, cr67, cr6a, rev = 0, shift = 10;
-	if (len > 256)
-		return 1;
-	if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name) {
-		/*
-		 * Read PCI bus 0, dev 0, function 0, index 0xF6 to get chip
-		 * rev.
-		 */
-		outl(0x80000000 | (0xf6 & ~3), (unsigned long)0xCF8);
-		rev = (inl((unsigned long)0xCFC) >> ((0xf6 & 3) * 8)) & 0xff;
-	}
-	switch (info->var.bits_per_pixel) {
-	case 8:
-		outb(0x1A, 0x3C4);
-		sr1a = inb(0x3C5);
-		outb(0x1B, 0x3C4);
-		sr1b = inb(0x3C5);
-		outb(0x67, 0x3D4);
-		cr67 = inb(0x3D5);
-		outb(0x6A, 0x3D4);
-		cr6a = inb(0x3D5);
-		/* Map the 3C6/7/8/9 to the IGA2 */
-		outb(0x1A, 0x3C4);
-		outb(sr1a | 0x01, 0x3C5);
-		outb(0x1B, 0x3C4);
-		/* Second Display Engine colck always on */
-		outb(sr1b | 0x80, 0x3C5);
-		outb(0x67, 0x3D4);
-		/* Second Display Color Depth 8 */
-		outb(cr67 & 0x3F, 0x3D5);
-		outb(0x6A, 0x3D4);
-		/* Second Display Channel Reset CR6A[6]) */
-		outb(cr6a & 0xBF, 0x3D5);
-		/* Second Display Channel Enable CR6A[7] */
-		outb(cr6a | 0x80, 0x3D5);
-		/* Second Display Channel stop reset) */
-		outb(cr6a | 0xC0, 0x3D5);
-
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		outb(0x00, 0x3C8);
-		if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name &&
-			rev >= 15) {
-			shift = 8;
-			viafb_write_reg_mask(CR6A, VIACR, BIT5, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, BIT7, BIT7);
-		} else {
-			shift = 10;
-			viafb_write_reg_mask(CR6A, VIACR, 0, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, 0, BIT7);
-		}
-		for (i = 0; i < len; i++) {
-			outb((*(pred + i)) >> shift, 0x3C9);
-			outb((*(pgreen + i)) >> shift, 0x3C9);
-			outb((*(pblue + i)) >> shift, 0x3C9);
-		}
+		if (!viafb_dual_fb || viapar->iga_path == IGA1)
+			viafb_set_primary_color_register(regno, red >> 8,
+				green >> 8, blue >> 8);
 
-		outb(0x1A, 0x3C4);
-		/* Map the 3C6/7/8/9 to the IGA1 */
-		outb(sr1a & 0xFE, 0x3C5);
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		outb(0x00, 0x3C8);
-		for (i = 0; i < len; i++) {
-			outb((*(pred + i)) >> shift, 0x3C9);
-			outb((*(pgreen + i)) >> shift, 0x3C9);
-			outb((*(pblue + i)) >> shift, 0x3C9);
-		}
+		if (!viafb_dual_fb || viapar->iga_path == IGA2)
+			viafb_set_secondary_color_register(regno, red >> 8,
+				green >> 8, blue >> 8);
+	} else {
+		if (regno > 15)
+			return -EINVAL;
 
-		outb(0x1A, 0x3C4);
-		outb(sr1a, 0x3C5);
-		outb(0x1B, 0x3C4);
-		outb(sr1b, 0x3C5);
-		outb(0x67, 0x3D4);
-		outb(cr67, 0x3D5);
-		outb(0x6A, 0x3D4);
-		outb(cr6a, 0x3D5);
-		break;
-	case 16:
-		if (len > 17)
-			return 0;	/* Because static u32 pseudo_pal[17]; */
-		for (i = 0; i < len; i++)
-			((u32 *) info->pseudo_palette)[i] =
-			    (*(pred + i) & 0xF800) |
-			    ((*(pgreen + i) & 0xFC00) >> 5) |
-			    ((*(pblue + i) & 0xF800) >> 11);
-		break;
-	case 32:
-		if (len > 17)
-			return 0;
-		if (ptransp) {
-			for (i = 0; i < len; i++)
-				((u32 *) info->pseudo_palette)[i] =
-				    ((*(ptransp + i) & 0xFF00) << 16) |
-				    ((*(pred + i) & 0xFF00) << 8) |
-				    ((*(pgreen + i) & 0xFF00)) |
-				    ((*(pblue + i) & 0xFF00) >> 8);
-		} else {
-			for (i = 0; i < len; i++)
-				((u32 *) info->pseudo_palette)[i] =
-				    0x00000000 |
-				    ((*(pred + i) & 0xFF00) << 8) |
-				    ((*(pgreen + i) & 0xFF00)) |
-				    ((*(pblue + i) & 0xFF00) >> 8);
-		}
-		break;
+		r = (red >> (16 - info->var.red.length))
+			<< info->var.red.offset;
+		b = (blue >> (16 - info->var.blue.length))
+			<< info->var.blue.offset;
+		g = (green >> (16 - info->var.green.length))
+			<< info->var.green.offset;
+		((u32 *) info->pseudo_palette)[regno] = r | g | b;
 	}
+
 	return 0;
 }
 
 static int viafb_pan_display(struct fb_var_screeninfo *var,
 	struct fb_info *info)
 {
-	unsigned int offset;
-
-	DEBUG_MSG(KERN_INFO "viafb_pan_display!\n");
-
-	offset = (var->xoffset + (var->yoffset * var->xres_virtual)) *
-	    var->bits_per_pixel / 16;
+	struct viafb_par *viapar = info->par;
+	u32 vram_addr = (var->yoffset * var->xres_virtual + var->xoffset)
+		* (var->bits_per_pixel / 8) + viapar->vram_addr;
+
+	DEBUG_MSG(KERN_DEBUG "viafb_pan_display, address = %d\n", vram_addr);
+	if (!viafb_dual_fb) {
+		viafb_set_primary_address(vram_addr);
+		viafb_set_secondary_address(vram_addr);
+	} else if (viapar->iga_path == IGA1)
+		viafb_set_primary_address(vram_addr);
+	else
+		viafb_set_secondary_address(vram_addr);
 
-	DEBUG_MSG(KERN_INFO "\nviafb_pan_display,offset =%d ", offset);
-	viafb_set_primary_address(offset);
 	return 0;
 }
 
@@ -476,6 +376,7 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
 	u32 gpu32;
 
 	DEBUG_MSG(KERN_INFO "viafb_ioctl: 0x%X !!\n", cmd);
+	printk(KERN_WARNING "viafb_ioctl: Please avoid this interface as it is unstable and might change or vanish at any time!\n");
 	memset(&u, 0, sizeof(u));
 
 	switch (cmd) {
@@ -1015,23 +916,6 @@ static int viafb_sync(struct fb_info *info)
 	return 0;
 }
 
-int viafb_get_mode_index(int hres, int vres)
-{
-	u32 i;
-	DEBUG_MSG(KERN_INFO "viafb_get_mode_index!\n");
-
-	for (i = 0; i < NUM_TOTAL_MODETABLE; i++)
-		if (CLE266Modes[i].mode_array &&
-			CLE266Modes[i].crtc[0].crtc.hor_addr == hres &&
-			CLE266Modes[i].crtc[0].crtc.ver_addr == vres)
-			break;
-
-	if (i == NUM_TOTAL_MODETABLE)
-		return VIA_RES_INVALID;
-
-	return CLE266Modes[i].ModeIndex;
-}
-
 static void check_available_device_to_enable(int device_id)
 {
 	int device_num = 0;
@@ -1330,7 +1214,7 @@ static void retrieve_device_setting(struct viafb_ioctl_setting
 	setting_info->lcd_attributes.lcd_mode = viafb_lcd_mode;
 }
 
-static void parse_active_dev(void)
+static int parse_active_dev(void)
 {
 	viafb_CRT_ON = STATE_OFF;
 	viafb_DVI_ON = STATE_OFF;
@@ -1341,60 +1225,63 @@ static void parse_active_dev(void)
 	   IGA path to devices in SAMM case. */
 	/*    Note: The previous of active_dev is primary device,
 	   and the following is secondary device. */
-	if (!strncmp(viafb_active_dev, "CRT+DVI", 7)) {
+	if (!viafb_active_dev) {
+		viafb_CRT_ON = STATE_ON;
+		viafb_SAMM_ON = STATE_OFF;
+	} else if (!strcmp(viafb_active_dev, "CRT+DVI")) {
 		/* CRT+DVI */
 		viafb_CRT_ON = STATE_ON;
 		viafb_DVI_ON = STATE_ON;
 		viafb_primary_dev = CRT_Device;
-	} else if (!strncmp(viafb_active_dev, "DVI+CRT", 7)) {
+	} else if (!strcmp(viafb_active_dev, "DVI+CRT")) {
 		/* DVI+CRT */
 		viafb_CRT_ON = STATE_ON;
 		viafb_DVI_ON = STATE_ON;
 		viafb_primary_dev = DVI_Device;
-	} else if (!strncmp(viafb_active_dev, "CRT+LCD", 7)) {
+	} else if (!strcmp(viafb_active_dev, "CRT+LCD")) {
 		/* CRT+LCD */
 		viafb_CRT_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = CRT_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD+CRT", 7)) {
+	} else if (!strcmp(viafb_active_dev, "LCD+CRT")) {
 		/* LCD+CRT */
 		viafb_CRT_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = LCD_Device;
-	} else if (!strncmp(viafb_active_dev, "DVI+LCD", 7)) {
+	} else if (!strcmp(viafb_active_dev, "DVI+LCD")) {
 		/* DVI+LCD */
 		viafb_DVI_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = DVI_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD+DVI", 7)) {
+	} else if (!strcmp(viafb_active_dev, "LCD+DVI")) {
 		/* LCD+DVI */
 		viafb_DVI_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = LCD_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD+LCD2", 8)) {
+	} else if (!strcmp(viafb_active_dev, "LCD+LCD2")) {
 		viafb_LCD_ON = STATE_ON;
 		viafb_LCD2_ON = STATE_ON;
 		viafb_primary_dev = LCD_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD2+LCD", 8)) {
+	} else if (!strcmp(viafb_active_dev, "LCD2+LCD")) {
 		viafb_LCD_ON = STATE_ON;
 		viafb_LCD2_ON = STATE_ON;
 		viafb_primary_dev = LCD2_Device;
-	} else if (!strncmp(viafb_active_dev, "CRT", 3)) {
+	} else if (!strcmp(viafb_active_dev, "CRT")) {
 		/* CRT only */
 		viafb_CRT_ON = STATE_ON;
 		viafb_SAMM_ON = STATE_OFF;
-	} else if (!strncmp(viafb_active_dev, "DVI", 3)) {
+	} else if (!strcmp(viafb_active_dev, "DVI")) {
 		/* DVI only */
 		viafb_DVI_ON = STATE_ON;
 		viafb_SAMM_ON = STATE_OFF;
-	} else if (!strncmp(viafb_active_dev, "LCD", 3)) {
+	} else if (!strcmp(viafb_active_dev, "LCD")) {
 		/* LCD only */
 		viafb_LCD_ON = STATE_ON;
 		viafb_SAMM_ON = STATE_OFF;
-	} else {
-		viafb_CRT_ON = STATE_ON;
-		viafb_SAMM_ON = STATE_OFF;
-	}
+	} else
+		return -EINVAL;
+
+	return 0;
 }
 
 static int parse_port(char *opt_str, int *output_interface)
@@ -1823,35 +1710,37 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry)
 	remove_proc_entry("viafb", NULL);
 }
 
-static void parse_mode(const char *str, u32 *xres, u32 *yres)
+static int parse_mode(const char *str, u32 *xres, u32 *yres)
 {
 	char *ptr;
 
+	if (!str) {
+		*xres = 640;
+		*yres = 480;
+		return 0;
+	}
+
 	*xres = simple_strtoul(str, &ptr, 10);
 	if (ptr[0] != 'x')
-		goto out_default;
+		return -EINVAL;
 
 	*yres = simple_strtoul(&ptr[1], &ptr, 10);
 	if (ptr[0])
-		goto out_default;
-
-	return;
+		return -EINVAL;
 
-out_default:
-	printk(KERN_WARNING "viafb received invalid mode string: %s\n", str);
-	*xres = 640;
-	*yres = 480;
+	return 0;
 }
 
 static int __devinit via_pci_probe(struct pci_dev *pdev,
 				   const struct pci_device_id *ent)
 {
 	u32 default_xres, default_yres;
-	int vmode_index;
+	struct VideoModeTable *vmode_entry;
+	struct fb_var_screeninfo default_var;
 	u32 viafb_par_length;
 
 	DEBUG_MSG(KERN_INFO "VIAFB PCI Probe!!\n");
-
+	memset(&default_var, 0, sizeof(default_var));
 	viafb_par_length = ALIGN(sizeof(struct viafb_par), BITS_PER_LONG/8);
 
 	/* Allocate fb_info and ***_par here, also including some other needed
@@ -1877,7 +1766,6 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 
 	if (viafb_dual_fb)
 		viafb_SAMM_ON = 1;
-	parse_active_dev();
 	parse_lcd_port();
 	parse_dvi_port();
 
@@ -1926,9 +1814,7 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	}
 
 	parse_mode(viafb_mode, &default_xres, &default_yres);
-	vmode_index = viafb_get_mode_index(default_xres, default_yres);
-	DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
-
+	vmode_entry = viafb_get_mode(default_xres, default_yres);
 	if (viafb_SAMM_ON == 1) {
 		parse_mode(viafb_mode1, &viafb_second_xres,
 			&viafb_second_yres);
@@ -1947,19 +1833,6 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 			viafb_second_virtual_yres = viafb_second_yres;
 	}
 
-	switch (viafb_bpp) {
-	case 0 ... 8:
-		viafb_bpp = 8;
-		break;
-	case 9 ... 16:
-		viafb_bpp = 16;
-		break;
-	case 17 ... 32:
-		viafb_bpp = 32;
-		break;
-	default:
-		viafb_bpp = 8;
-	}
 	default_var.xres = default_xres;
 	default_var.yres = default_yres;
 	switch (default_xres) {
@@ -1972,8 +1845,6 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	}
 	default_var.yres_virtual = default_yres;
 	default_var.bits_per_pixel = viafb_bpp;
-	if (default_var.bits_per_pixel == 15)
-		default_var.bits_per_pixel = 16;
 	default_var.pixclock =
 	    viafb_get_pixclock(default_xres, default_yres, viafb_refresh);
 	default_var.left_margin = (default_xres >> 3) & 0xf8;
@@ -1982,6 +1853,8 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	default_var.lower_margin = 4;
 	default_var.hsync_len = default_var.left_margin;
 	default_var.vsync_len = 4;
+	viafb_setup_fixinfo(&viafbinfo->fix, viaparinfo);
+	viafbinfo->var = default_var;
 
 	if (viafb_dual_fb) {
 		viafbinfo1 = framebuffer_alloc(viafb_par_length, &pdev->dev);
@@ -2016,8 +1889,6 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 		default_var.yres = viafb_second_yres;
 		default_var.xres_virtual = viafb_second_virtual_xres;
 		default_var.yres_virtual = viafb_second_virtual_yres;
-		if (viafb_bpp1 != viafb_bpp)
-			viafb_bpp1 = viafb_bpp;
 		default_var.bits_per_pixel = viafb_bpp1;
 		default_var.pixclock =
 		    viafb_get_pixclock(viafb_second_xres, viafb_second_yres,
@@ -2037,9 +1908,7 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 			&viafbinfo1->fix);
 	}
 
-	viafb_setup_fixinfo(&viafbinfo->fix, viaparinfo);
-	viafb_check_var(&default_var, viafbinfo);
-	viafbinfo->var = default_var;
+	viafb_check_var(&viafbinfo->var, viafbinfo);
 	viafb_update_fix(viafbinfo);
 	viaparinfo->depth = fb_get_color_depth(&viafbinfo->var,
 		&viafbinfo->fix);
@@ -2197,12 +2066,20 @@ static struct pci_driver viafb_driver = {
 
 static int __init viafb_init(void)
 {
+	u32 dummy;
 #ifndef MODULE
 	char *option = NULL;
 	if (fb_get_options("viafb", &option))
 		return -ENODEV;
 	viafb_setup(option);
 #endif
+	if (parse_mode(viafb_mode, &dummy, &dummy)
+		|| parse_mode(viafb_mode1, &dummy, &dummy)
+		|| viafb_bpp < 0 || viafb_bpp > 32
+		|| viafb_bpp1 < 0 || viafb_bpp1 > 32
+		|| parse_active_dev())
+		return -EINVAL;
+
 	printk(KERN_INFO
        "VIA Graphics Intergration Chipset framebuffer %d.%d initializing\n",
 	       VERSION_MAJOR, VERSION_MINOR);
@@ -2230,15 +2107,12 @@ static struct fb_ops viafb_ops = {
 	.fb_cursor = viafb_cursor,
 	.fb_ioctl = viafb_ioctl,
 	.fb_sync = viafb_sync,
-	.fb_setcmap = viafb_setcmap,
 };
 
 module_init(viafb_init);
 module_exit(viafb_exit);
 
 #ifdef MODULE
-module_param(viafb_memsize, int, S_IRUSR);
-
 module_param(viafb_mode, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_mode, "Set resolution (default=640x480)");
 
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h
index 0c94d2441922..61b5953cd159 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/via/viafbdev.h
@@ -83,22 +83,16 @@ struct viafb_par {
 
 extern unsigned int viafb_second_virtual_yres;
 extern unsigned int viafb_second_virtual_xres;
-extern unsigned int viafb_second_offset;
-extern int viafb_second_size;
 extern int viafb_SAMM_ON;
 extern int viafb_dual_fb;
 extern int viafb_LCD2_ON;
 extern int viafb_LCD_ON;
 extern int viafb_DVI_ON;
 extern int viafb_hotplug;
-extern int viafb_memsize;
 
 extern int strict_strtoul(const char *cp, unsigned int base,
 	unsigned long *res);
 
-void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
-			  int mode_index);
-int viafb_get_mode_index(int hres, int vres);
 u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
 	*plvds_setting_info, struct lvds_chip_information
 	*plvds_chip_info, u8 index);
diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c
index b74f8a67923c..af50e244016c 100644
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/via/viamode.c
@@ -412,7 +412,7 @@ struct io_reg PM1024x768[] = { {VIASR, 0x16, 0xBF, 0x0C},
 };
 
 struct patch_table res_patch_table[] = {
-	{VIA_RES_1024X768, ARRAY_SIZE(PM1024x768), PM1024x768}
+	{ARRAY_SIZE(PM1024x768), PM1024x768}
 };
 
 /* struct VPITTable {
@@ -879,169 +879,151 @@ struct crt_mode_table CRTM2048x1536[] = {
 	 {2800, 2048, 2048, 752, 2200, 224, 1592, 1536, 1536, 56, 1539, 4} }
 };
 
-/* Video Mode Table */
-/* struct VideoModeTable {*/
-/*  int                               ModeIndex;*/
-/*  struct crt_mode_table             *crtc;*/
-/*  int                               mode_array;*/
-/* };*/
-struct VideoModeTable CLE266Modes[] = {
+struct VideoModeTable viafb_modes[] = {
 	/* Display : 480x640 (GTF) */
-	{VIA_RES_480X640, CRTM480x640, ARRAY_SIZE(CRTM480x640)},
+	{CRTM480x640, ARRAY_SIZE(CRTM480x640)},
 
 	/* Display : 640x480 */
-	{VIA_RES_640X480, CRTM640x480, ARRAY_SIZE(CRTM640x480)},
+	{CRTM640x480, ARRAY_SIZE(CRTM640x480)},
 
 	/* Display : 720x480 (GTF) */
-	{VIA_RES_720X480, CRTM720x480, ARRAY_SIZE(CRTM720x480)},
+	{CRTM720x480, ARRAY_SIZE(CRTM720x480)},
 
 	/* Display : 720x576 (GTF) */
-	{VIA_RES_720X576, CRTM720x576, ARRAY_SIZE(CRTM720x576)},
+	{CRTM720x576, ARRAY_SIZE(CRTM720x576)},
 
 	/* Display : 800x600 */
-	{VIA_RES_800X600, CRTM800x600, ARRAY_SIZE(CRTM800x600)},
+	{CRTM800x600, ARRAY_SIZE(CRTM800x600)},
 
 	/* Display : 800x480 (CVT) */
-	{VIA_RES_800X480, CRTM800x480, ARRAY_SIZE(CRTM800x480)},
+	{CRTM800x480, ARRAY_SIZE(CRTM800x480)},
 
 	/* Display : 848x480 (CVT) */
-	{VIA_RES_848X480, CRTM848x480, ARRAY_SIZE(CRTM848x480)},
+	{CRTM848x480, ARRAY_SIZE(CRTM848x480)},
 
 	/* Display : 852x480 (GTF) */
-	{VIA_RES_856X480, CRTM852x480, ARRAY_SIZE(CRTM852x480)},
+	{CRTM852x480, ARRAY_SIZE(CRTM852x480)},
 
 	/* Display : 1024x512 (GTF) */
-	{VIA_RES_1024X512, CRTM1024x512, ARRAY_SIZE(CRTM1024x512)},
+	{CRTM1024x512, ARRAY_SIZE(CRTM1024x512)},
 
 	/* Display : 1024x600 */
-	{VIA_RES_1024X600, CRTM1024x600, ARRAY_SIZE(CRTM1024x600)},
-
-	/* Display : 1024x576 (GTF) */
-	/*{ VIA_RES_1024X576, CRTM1024x576, ARRAY_SIZE(CRTM1024x576)}, */
+	{CRTM1024x600, ARRAY_SIZE(CRTM1024x600)},
 
 	/* Display : 1024x768 */
-	{VIA_RES_1024X768, CRTM1024x768, ARRAY_SIZE(CRTM1024x768)},
+	{CRTM1024x768, ARRAY_SIZE(CRTM1024x768)},
 
 	/* Display : 1152x864 */
-	{VIA_RES_1152X864, CRTM1152x864, ARRAY_SIZE(CRTM1152x864)},
+	{CRTM1152x864, ARRAY_SIZE(CRTM1152x864)},
 
 	/* Display : 1280x768 (GTF) */
-	{VIA_RES_1280X768, CRTM1280x768, ARRAY_SIZE(CRTM1280x768)},
+	{CRTM1280x768, ARRAY_SIZE(CRTM1280x768)},
 
 	/* Display : 960x600 (CVT) */
-	{VIA_RES_960X600, CRTM960x600, ARRAY_SIZE(CRTM960x600)},
+	{CRTM960x600, ARRAY_SIZE(CRTM960x600)},
 
 	/* Display : 1000x600 (GTF) */
-	{VIA_RES_1000X600, CRTM1000x600, ARRAY_SIZE(CRTM1000x600)},
+	{CRTM1000x600, ARRAY_SIZE(CRTM1000x600)},
 
 	/* Display : 1024x576 (GTF) */
-	{VIA_RES_1024X576, CRTM1024x576, ARRAY_SIZE(CRTM1024x576)},
+	{CRTM1024x576, ARRAY_SIZE(CRTM1024x576)},
 
 	/* Display : 1088x612 (GTF) */
-	{VIA_RES_1088X612, CRTM1088x612, ARRAY_SIZE(CRTM1088x612)},
+	{CRTM1088x612, ARRAY_SIZE(CRTM1088x612)},
 
 	/* Display : 1152x720 (CVT) */
-	{VIA_RES_1152X720, CRTM1152x720, ARRAY_SIZE(CRTM1152x720)},
+	{CRTM1152x720, ARRAY_SIZE(CRTM1152x720)},
 
 	/* Display : 1200x720 (GTF) */
-	{VIA_RES_1200X720, CRTM1200x720, ARRAY_SIZE(CRTM1200x720)},
+	{CRTM1200x720, ARRAY_SIZE(CRTM1200x720)},
 
 	/* Display : 1280x600 (GTF) */
-	{VIA_RES_1280X600, CRTM1280x600, ARRAY_SIZE(CRTM1280x600)},
+	{CRTM1280x600, ARRAY_SIZE(CRTM1280x600)},
 
 	/* Display : 1280x800 (CVT) */
-	{VIA_RES_1280X800, CRTM1280x800, ARRAY_SIZE(CRTM1280x800)},
-
-	/* Display : 1280x800 (GTF) */
-	/*{ M1280x800, CRTM1280x800, ARRAY_SIZE(CRTM1280x800)}, */
+	{CRTM1280x800, ARRAY_SIZE(CRTM1280x800)},
 
 	/* Display : 1280x960 */
-	{VIA_RES_1280X960, CRTM1280x960, ARRAY_SIZE(CRTM1280x960)},
+	{CRTM1280x960, ARRAY_SIZE(CRTM1280x960)},
 
 	/* Display : 1280x1024 */
-	{VIA_RES_1280X1024, CRTM1280x1024, ARRAY_SIZE(CRTM1280x1024)},
+	{CRTM1280x1024, ARRAY_SIZE(CRTM1280x1024)},
 
 	/* Display : 1360x768 (CVT) */
-	{VIA_RES_1360X768, CRTM1360x768, ARRAY_SIZE(CRTM1360x768)},
-
-	/* Display : 1360x768 (CVT Reduce Blanking) */
-	{VIA_RES_1360X768_RB, CRTM1360x768_RB,
-	 ARRAY_SIZE(CRTM1360x768_RB)},
+	{CRTM1360x768, ARRAY_SIZE(CRTM1360x768)},
 
 	/* Display : 1366x768 */
-	{VIA_RES_1366X768, CRTM1366x768, ARRAY_SIZE(CRTM1366x768)},
+	{CRTM1366x768, ARRAY_SIZE(CRTM1366x768)},
 
 	/* Display : 1368x768 (GTF) */
-	/*{ M1368x768,CRTM1368x768,ARRAY_SIZE(CRTM1368x768)}, */
-	/* Display : 1368x768 (GTF) */
-	{VIA_RES_1368X768, CRTM1368x768, ARRAY_SIZE(CRTM1368x768)},
+	{CRTM1368x768, ARRAY_SIZE(CRTM1368x768)},
 
 	/* Display : 1440x900 (CVT) */
-	{VIA_RES_1440X900, CRTM1440x900, ARRAY_SIZE(CRTM1440x900)},
-
-	/* Display : 1440x900 (CVT Reduce Blanking) */
-	{VIA_RES_1440X900_RB, CRTM1440x900_RB,
-	 ARRAY_SIZE(CRTM1440x900_RB)},
+	{CRTM1440x900, ARRAY_SIZE(CRTM1440x900)},
 
 	/* Display : 1440x1050 (GTF) */
-	{VIA_RES_1440X1050, CRTM1440x1050, ARRAY_SIZE(CRTM1440x1050)},
-
-	/* Display : 1400x1050 (CVT Reduce Blanking) */
-	{VIA_RES_1400X1050_RB, CRTM1400x1050_RB,
-	 ARRAY_SIZE(CRTM1400x1050_RB)},
+	{CRTM1440x1050, ARRAY_SIZE(CRTM1440x1050)},
 
 	/* Display : 1600x900 (CVT) */
-	{VIA_RES_1600X900, CRTM1600x900, ARRAY_SIZE(CRTM1600x900)},
-
-	/* Display : 1600x900 (CVT Reduce Blanking) */
-	{VIA_RES_1600X900_RB, CRTM1600x900_RB,
-	 ARRAY_SIZE(CRTM1600x900_RB)},
+	{CRTM1600x900, ARRAY_SIZE(CRTM1600x900)},
 
 	/* Display : 1600x1024 (GTF) */
-	{VIA_RES_1600X1024, CRTM1600x1024, ARRAY_SIZE(CRTM1600x1024)},
+	{CRTM1600x1024, ARRAY_SIZE(CRTM1600x1024)},
 
 	/* Display : 1600x1200 */
-	{VIA_RES_1600X1200, CRTM1600x1200, ARRAY_SIZE(CRTM1600x1200)},
+	{CRTM1600x1200, ARRAY_SIZE(CRTM1600x1200)},
 
 	/* Display : 1680x1050 (CVT) */
-	{VIA_RES_1680X1050, CRTM1680x1050, ARRAY_SIZE(CRTM1680x1050)},
-
-	/* Display : 1680x1050 (CVT Reduce Blanking) */
-	{VIA_RES_1680X1050_RB, CRTM1680x1050_RB,
-	 ARRAY_SIZE(CRTM1680x1050_RB)},
+	{CRTM1680x1050, ARRAY_SIZE(CRTM1680x1050)},
 
 	/* Display : 1792x1344 (DMT) */
-	{VIA_RES_1792X1344, CRTM1792x1344, ARRAY_SIZE(CRTM1792x1344)},
+	{CRTM1792x1344, ARRAY_SIZE(CRTM1792x1344)},
 
 	/* Display : 1856x1392 (DMT) */
-	{VIA_RES_1856X1392, CRTM1856x1392, ARRAY_SIZE(CRTM1856x1392)},
+	{CRTM1856x1392, ARRAY_SIZE(CRTM1856x1392)},
 
 	/* Display : 1920x1440 */
-	{VIA_RES_1920X1440, CRTM1920x1440, ARRAY_SIZE(CRTM1920x1440)},
+	{CRTM1920x1440, ARRAY_SIZE(CRTM1920x1440)},
 
 	/* Display : 2048x1536 */
-	{VIA_RES_2048X1536, CRTM2048x1536, ARRAY_SIZE(CRTM2048x1536)},
+	{CRTM2048x1536, ARRAY_SIZE(CRTM2048x1536)},
 
 	/* Display : 1280x720 */
-	{VIA_RES_1280X720, CRTM1280x720, ARRAY_SIZE(CRTM1280x720)},
+	{CRTM1280x720, ARRAY_SIZE(CRTM1280x720)},
 
 	/* Display : 1920x1080 (CVT) */
-	{VIA_RES_1920X1080, CRTM1920x1080, ARRAY_SIZE(CRTM1920x1080)},
-
-	/* Display : 1920x1080 (CVT Reduce Blanking) */
-	{VIA_RES_1920X1080_RB, CRTM1920x1080_RB,
-	 ARRAY_SIZE(CRTM1920x1080_RB)},
+	{CRTM1920x1080, ARRAY_SIZE(CRTM1920x1080)},
 
 	/* Display : 1920x1200 (CVT) */
-	{VIA_RES_1920X1200, CRTM1920x1200, ARRAY_SIZE(CRTM1920x1200)},
-
-	/* Display : 1920x1200 (CVT Reduce Blanking) */
-	{VIA_RES_1920X1200_RB, CRTM1920x1200_RB,
-	 ARRAY_SIZE(CRTM1920x1200_RB)},
+	{CRTM1920x1200, ARRAY_SIZE(CRTM1920x1200)},
 
 	/* Display : 1400x1050 (CVT) */
-	{VIA_RES_1400X1050, CRTM1400x1050, ARRAY_SIZE(CRTM1400x1050)}
+	{CRTM1400x1050, ARRAY_SIZE(CRTM1400x1050)}
 };
+
+struct VideoModeTable viafb_rb_modes[] = {
+	/* Display : 1360x768 (CVT Reduce Blanking) */
+	{CRTM1360x768_RB, ARRAY_SIZE(CRTM1360x768_RB)},
+
+	/* Display : 1440x900 (CVT Reduce Blanking) */
+	{CRTM1440x900_RB, ARRAY_SIZE(CRTM1440x900_RB)},
+
+	/* Display : 1400x1050 (CVT Reduce Blanking) */
+	{CRTM1400x1050_RB, ARRAY_SIZE(CRTM1400x1050_RB)},
+
+	/* Display : 1600x900 (CVT Reduce Blanking) */
+	{CRTM1600x900_RB, ARRAY_SIZE(CRTM1600x900_RB)},
+
+	/* Display : 1680x1050 (CVT Reduce Blanking) */
+	{CRTM1680x1050_RB, ARRAY_SIZE(CRTM1680x1050_RB)},
+
+	/* Display : 1920x1080 (CVT Reduce Blanking) */
+	{CRTM1920x1080_RB, ARRAY_SIZE(CRTM1920x1080_RB)},
+
+	/* Display : 1920x1200 (CVT Reduce Blanking) */
+	{CRTM1920x1200_RB, ARRAY_SIZE(CRTM1920x1200_RB)}
+};
+
 struct crt_mode_table CEAM1280x720[] = {
 	{REFRESH_60, CLK_74_270M, M1280X720_CEA_R60_HSP,
 	 M1280X720_CEA_R60_VSP,
@@ -1056,8 +1038,8 @@ struct crt_mode_table CEAM1920x1080[] = {
 };
 struct VideoModeTable CEA_HDMI_Modes[] = {
 	/* Display : 1280x720 */
-	{VIA_RES_1280X720, CEAM1280x720, ARRAY_SIZE(CEAM1280x720)},
-	{VIA_RES_1920X1080, CEAM1920x1080, ARRAY_SIZE(CEAM1920x1080)}
+	{CEAM1280x720, ARRAY_SIZE(CEAM1280x720)},
+	{CEAM1920x1080, ARRAY_SIZE(CEAM1920x1080)}
 };
 
 int NUM_TOTAL_RES_MAP_REFRESH = ARRAY_SIZE(res_map_refresh_tbl);
@@ -1069,4 +1051,28 @@ int NUM_TOTAL_CX700_ModeXregs = ARRAY_SIZE(CX700_ModeXregs);
 int NUM_TOTAL_VX855_ModeXregs = ARRAY_SIZE(VX855_ModeXregs);
 int NUM_TOTAL_CLE266_ModeXregs = ARRAY_SIZE(CLE266_ModeXregs);
 int NUM_TOTAL_PATCH_MODE = ARRAY_SIZE(res_patch_table);
-int NUM_TOTAL_MODETABLE = ARRAY_SIZE(CLE266Modes);
+
+
+struct VideoModeTable *viafb_get_mode(int hres, int vres)
+{
+	u32 i;
+	for (i = 0; i < ARRAY_SIZE(viafb_modes); i++)
+		if (viafb_modes[i].mode_array &&
+			viafb_modes[i].crtc[0].crtc.hor_addr == hres &&
+			viafb_modes[i].crtc[0].crtc.ver_addr == vres)
+			return &viafb_modes[i];
+
+	return NULL;
+}
+
+struct VideoModeTable *viafb_get_rb_mode(int hres, int vres)
+{
+	u32 i;
+	for (i = 0; i < ARRAY_SIZE(viafb_rb_modes); i++)
+		if (viafb_rb_modes[i].mode_array &&
+			viafb_rb_modes[i].crtc[0].crtc.hor_addr == hres &&
+			viafb_rb_modes[i].crtc[0].crtc.ver_addr == vres)
+			return &viafb_rb_modes[i];
+
+	return NULL;
+}
diff --git a/drivers/video/via/viamode.h b/drivers/video/via/viamode.h
index a9d6554fabdf..5b1ced86514b 100644
--- a/drivers/video/via/viamode.h
+++ b/drivers/video/via/viamode.h
@@ -32,13 +32,11 @@ struct VPITTable {
 };
 
 struct VideoModeTable {
-	int ModeIndex;
 	struct crt_mode_table *crtc;
 	int mode_array;
 };
 
 struct patch_table {
-	int mode_index;
 	int table_length;
 	struct io_reg *io_reg_table;
 };
@@ -59,13 +57,11 @@ extern int NUM_TOTAL_CX700_ModeXregs;
 extern int NUM_TOTAL_VX855_ModeXregs;
 extern int NUM_TOTAL_CLE266_ModeXregs;
 extern int NUM_TOTAL_PATCH_MODE;
-extern int NUM_TOTAL_MODETABLE;
 
 /********************/
 /* Mode Table       */
 /********************/
 
-extern struct VideoModeTable CLE266Modes[];
 extern struct crt_mode_table CEAM1280x720[];
 extern struct crt_mode_table CEAM1920x1080[];
 extern struct VideoModeTable CEA_HDMI_Modes[];
@@ -81,4 +77,8 @@ extern struct io_reg CLE266_ModeXregs[];
 extern struct io_reg PM1024x768[];
 extern struct patch_table res_patch_table[];
 extern struct VPITTable VPIT;
+
+struct VideoModeTable *viafb_get_mode(int hres, int vres);
+struct VideoModeTable *viafb_get_rb_mode(int hres, int vres);
+
 #endif /* __VIAMODE_H__ */
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 2376f688ec8b..5d223959778a 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -628,7 +628,7 @@ static int w100fb_resume(struct platform_device *dev)
 #endif
 
 
-int __init w100fb_probe(struct platform_device *pdev)
+int __devinit w100fb_probe(struct platform_device *pdev)
 {
 	int err = -EIO;
 	struct w100fb_mach_info *inf;
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index 406caa6a71cb..e5f74416d4b7 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -214,7 +214,7 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev)
 			 (++retries < DS2482_WAIT_IDLE_TIMEOUT));
 	}
 
-	if (retries > DS2482_WAIT_IDLE_TIMEOUT)
+	if (retries >= DS2482_WAIT_IDLE_TIMEOUT)
 		printk(KERN_ERR "%s: timeout on channel %d\n",
 		       __func__, pdev->channel);
 
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index 65244c02551b..492670358cbf 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -102,7 +102,7 @@ static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
 	return ((__raw_readb(ctrl_addr)) >> 3) & 0x1;
 }
 
-static int __init mxc_w1_probe(struct platform_device *pdev)
+static int __devinit mxc_w1_probe(struct platform_device *pdev)
 {
 	struct mxc_w1_device *mdev;
 	struct resource *res;
@@ -166,7 +166,7 @@ failed_clk:
 /*
  * disassociate the w1 device from the driver
  */
-static int mxc_w1_remove(struct platform_device *pdev)
+static int __devexit mxc_w1_remove(struct platform_device *pdev)
 {
 	struct mxc_w1_device *mdev = platform_get_drvdata(pdev);
 	struct resource *res;
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 0d92969404c3..22977d30f89e 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -72,7 +72,7 @@ struct hdq_data {
 	int			init_trans;
 };
 
-static int __init omap_hdq_probe(struct platform_device *pdev);
+static int __devinit omap_hdq_probe(struct platform_device *pdev);
 static int omap_hdq_remove(struct platform_device *pdev);
 
 static struct platform_driver omap_hdq_driver = {
@@ -558,7 +558,7 @@ static void omap_w1_write_byte(void *_hdq, u8 byte)
 	return;
 }
 
-static int __init omap_hdq_probe(struct platform_device *pdev)
+static int __devinit omap_hdq_probe(struct platform_device *pdev)
 {
 	struct hdq_data *hdq_data;
 	struct resource *res;
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index acc7e3b7fe17..ad5897dc4495 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -986,7 +986,7 @@ int w1_process(void *data)
 	return 0;
 }
 
-static int w1_init(void)
+static int __init w1_init(void)
 {
 	int retval;
 
@@ -1034,7 +1034,7 @@ err_out_exit_init:
 	return retval;
 }
 
-static void w1_fini(void)
+static void __exit w1_fini(void)
 {
 	struct w1_master *dev;
 
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3da3f48720a7..bdcdbd53da89 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -55,6 +55,11 @@ config SOFT_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called softdog.
 
+config MAX63XX_WATCHDOG
+       tristate "Max63xx watchdog"
+       help
+         Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
+
 config WM831X_WATCHDOG
 	tristate "WM831x watchdog"
 	depends on MFD_WM831X
@@ -289,6 +294,17 @@ config ADX_WATCHDOG
 	  Say Y here if you want support for the watchdog timer on Avionic
 	  Design Xanthos boards.
 
+config TS72XX_WATCHDOG
+	tristate "TS-72XX SBC Watchdog"
+	depends on MACH_TS72XX
+	help
+	  Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
+	  watchdog timer implemented in a external CPLD chip. Say Y here
+	  if you want to support for the watchdog timer on TS-72XX boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ts72xx_wdt.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
@@ -845,10 +861,10 @@ config TXX9_WDT
 # POWERPC Architecture
 
 config GEF_WDT
-	tristate "GE Fanuc Watchdog Timer"
+	tristate "GE Watchdog Timer"
 	depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
 	---help---
-	  Watchdog timer found in a number of GE Fanuc single board computers.
+	  Watchdog timer found in a number of GE single board computers.
 
 config MPC5200_WDT
 	bool "MPC52xx Watchdog Timer"
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 475c61100069..5e3cb95bb0e9 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
 obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
 obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
 obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
+obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
@@ -142,4 +143,5 @@ obj-$(CONFIG_WATCHDOG_CP1XXX)		+= cpwd.o
 # Architecture Independant
 obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
 obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
+obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
index 4d18c874d963..2ffce4d75443 100644
--- a/drivers/watchdog/acquirewdt.c
+++ b/drivers/watchdog/acquirewdt.c
@@ -150,7 +150,7 @@ static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	int options, retval = -EINVAL;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = WATCHDOG_NAME,
diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c
index 824d076a5cd6..4d40965d2c9f 100644
--- a/drivers/watchdog/advantechwdt.c
+++ b/drivers/watchdog/advantechwdt.c
@@ -137,7 +137,7 @@ static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING |
 			   WDIOF_SETTIMEOUT |
 			   WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/adx_wdt.c b/drivers/watchdog/adx_wdt.c
index 9d7d155364f8..a5ca7a6ee133 100644
--- a/drivers/watchdog/adx_wdt.c
+++ b/drivers/watchdog/adx_wdt.c
@@ -37,7 +37,7 @@ struct adx_wdt {
 	spinlock_t lock;
 };
 
-static struct watchdog_info adx_wdt_info = {
+static const struct watchdog_info adx_wdt_info = {
 	.identity = "Avionic Design Xanthos Watchdog",
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 };
diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c
index 937a80fb61e1..1e9caea8ff8a 100644
--- a/drivers/watchdog/alim1535_wdt.c
+++ b/drivers/watchdog/alim1535_wdt.c
@@ -180,7 +180,7 @@ static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_KEEPALIVEPING |
 					WDIOF_SETTIMEOUT |
 					WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c
index f90afdb1b255..d8d4da9a483d 100644
--- a/drivers/watchdog/alim7101_wdt.c
+++ b/drivers/watchdog/alim7101_wdt.c
@@ -238,7 +238,7 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
 							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 2bb95cd308c1..c764c52412e4 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -219,7 +219,7 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data,
 static long ar7_wdt_ioctl(struct file *file,
 					unsigned int cmd, unsigned long arg)
 {
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.identity = LONGNAME,
 		.firmware_version = 1,
 		.options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index 037847923dcb..6873376f986c 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -202,7 +202,7 @@ static int at32_wdt_get_status(void)
 	return status;
 }
 
-static struct watchdog_info at32_wdt_info = {
+static const struct watchdog_info at32_wdt_info = {
 	.identity	= "at32ap700x watchdog",
 	.options	= WDIOF_SETTIMEOUT |
 			  WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index b185dafe1494..b3046dc4b56c 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -121,7 +121,7 @@ static int at91_wdt_settimeout(int new_time)
 	return 0;
 }
 
-static struct watchdog_info at91_wdt_info = {
+static const struct watchdog_info at91_wdt_info = {
 	.identity	= "at91 watchdog",
 	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 };
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
index 751c003864ad..5f245522397b 100644
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -149,7 +149,7 @@ static ssize_t bcm47xx_wdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static struct watchdog_info bcm47xx_wdt_info = {
+static const struct watchdog_info bcm47xx_wdt_info = {
 	.identity 	= DRV_NAME,
 	.options 	= WDIOF_SETTIMEOUT |
 				WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index 2159e668751c..9c7ccd1e9088 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -19,8 +19,6 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/fs.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/uaccess.h>
@@ -74,7 +72,7 @@
 
 static unsigned int timeout = WATCHDOG_TIMEOUT;
 static int nowayout = WATCHDOG_NOWAYOUT;
-static struct watchdog_info bfin_wdt_info;
+static const struct watchdog_info bfin_wdt_info;
 static unsigned long open_check;
 static char expect_close;
 static DEFINE_SPINLOCK(bfin_wdt_spinlock);
@@ -309,26 +307,6 @@ static long bfin_wdt_ioctl(struct file *file,
 	}
 }
 
-/**
- *	bfin_wdt_notify_sys - Notifier Handler
- *	@this: notifier block
- *	@code: notifier event
- *	@unused: unused
- *
- *	Handles specific events, such as turning off the watchdog during a
- *	shutdown event.
- */
-static int bfin_wdt_notify_sys(struct notifier_block *this,
-					unsigned long code, void *unused)
-{
-	stampit();
-
-	if (code == SYS_DOWN || code == SYS_HALT)
-		bfin_wdt_stop();
-
-	return NOTIFY_DONE;
-}
-
 #ifdef CONFIG_PM
 static int state_before_suspend;
 
@@ -388,40 +366,28 @@ static struct miscdevice bfin_wdt_miscdev = {
 	.fops     = &bfin_wdt_fops,
 };
 
-static struct watchdog_info bfin_wdt_info = {
+static const struct watchdog_info bfin_wdt_info = {
 	.identity = "Blackfin Watchdog",
 	.options  = WDIOF_SETTIMEOUT |
 		    WDIOF_KEEPALIVEPING |
 		    WDIOF_MAGICCLOSE,
 };
 
-static struct notifier_block bfin_wdt_notifier = {
-	.notifier_call = bfin_wdt_notify_sys,
-};
-
 /**
  *	bfin_wdt_probe - Initialize module
  *
- *	Registers the misc device and notifier handler.  Actual device
+ *	Registers the misc device.  Actual device
  *	initialization is handled by bfin_wdt_open().
  */
 static int __devinit bfin_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	ret = register_reboot_notifier(&bfin_wdt_notifier);
-	if (ret) {
-		pr_devinit(KERN_ERR PFX
-			"cannot register reboot notifier (err=%d)\n", ret);
-		return ret;
-	}
-
 	ret = misc_register(&bfin_wdt_miscdev);
 	if (ret) {
 		pr_devinit(KERN_ERR PFX
 			"cannot register miscdev on minor=%d (err=%d)\n",
 				WATCHDOG_MINOR, ret);
-		unregister_reboot_notifier(&bfin_wdt_notifier);
 		return ret;
 	}
 
@@ -434,21 +400,33 @@ static int __devinit bfin_wdt_probe(struct platform_device *pdev)
 /**
  *	bfin_wdt_remove - Initialize module
  *
- *	Unregisters the misc device and notifier handler.  Actual device
+ *	Unregisters the misc device.  Actual device
  *	deinitialization is handled by bfin_wdt_close().
  */
 static int __devexit bfin_wdt_remove(struct platform_device *pdev)
 {
 	misc_deregister(&bfin_wdt_miscdev);
-	unregister_reboot_notifier(&bfin_wdt_notifier);
 	return 0;
 }
 
+/**
+ *	bfin_wdt_shutdown - Soft Shutdown Handler
+ *
+ *	Handles the soft shutdown event.
+ */
+static void bfin_wdt_shutdown(struct platform_device *pdev)
+{
+	stampit();
+
+	bfin_wdt_stop();
+}
+
 static struct platform_device *bfin_wdt_device;
 
 static struct platform_driver bfin_wdt_driver = {
 	.probe     = bfin_wdt_probe,
 	.remove    = __devexit_p(bfin_wdt_remove),
+	.shutdown  = bfin_wdt_shutdown,
 	.suspend   = bfin_wdt_suspend,
 	.resume    = bfin_wdt_resume,
 	.driver    = {
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index e8380ef65c1c..8b724aad6825 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -121,7 +121,7 @@ static ssize_t booke_wdt_write(struct file *file, const char __user *buf,
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity = "PowerPC Book-E Watchdog",
 };
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index 923cc68dba26..9291506b8b23 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -257,7 +257,7 @@ static long coh901327_ioctl(struct file *file, unsigned int cmd,
 		struct watchdog_info __user *ident;
 		int __user *i;
 	} uarg;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options		= WDIOF_CARDRESET |
 					  WDIOF_SETTIMEOUT |
 					  WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c
index 71f6d7eec9a8..edd3475f41db 100644
--- a/drivers/watchdog/cpu5wdt.c
+++ b/drivers/watchdog/cpu5wdt.c
@@ -154,7 +154,7 @@ static long cpu5wdt_ioctl(struct file *file, unsigned int cmd,
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	unsigned int value;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_CARDRESET,
 		.identity = "CPU5 WDT",
 	};
diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c
index 081f2955419e..37ea052d4dee 100644
--- a/drivers/watchdog/cpwd.c
+++ b/drivers/watchdog/cpwd.c
@@ -403,7 +403,7 @@ static int cpwd_release(struct inode *inode, struct file *file)
 
 static long cpwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options		= WDIOF_SETTIMEOUT,
 		.firmware_version	= 1,
 		.identity		= DRIVER_NAME,
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 887136de1857..56162c87f5d8 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -142,7 +142,7 @@ davinci_wdt_write(struct file *file, const char *data, size_t len,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_KEEPALIVEPING,
 	.identity = "DaVinci Watchdog",
 };
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index cdd55e0d09f8..88ed54e50f74 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -131,7 +131,7 @@ ep93xx_wdt_write(struct file *file, const char __user *data, size_t len,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE,
 	.identity = "EP93xx Watchdog",
 };
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
index 9add3541fb42..d1c4e55b1db0 100644
--- a/drivers/watchdog/eurotechwdt.c
+++ b/drivers/watchdog/eurotechwdt.c
@@ -238,7 +238,7 @@ static long eurwdt_ioctl(struct file *file,
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options	  = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
 							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index 734d9806a872..abdbad034a6c 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc watchdog userspace interface
+ * GE watchdog userspace interface
  *
- * Author:  Martyn Welch <martyn.welch@gefanuc.com>
+ * Author:  Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -161,11 +161,11 @@ static long gef_wdt_ioctl(struct file *file, unsigned int cmd,
 	int timeout;
 	int options;
 	void __user *argp = (void __user *)arg;
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options =	WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
 				WDIOF_KEEPALIVEPING,
 		.firmware_version = 0,
-		.identity = "GE Fanuc watchdog",
+		.identity = "GE watchdog",
 	};
 
 	switch (cmd) {
@@ -311,7 +311,7 @@ static struct of_platform_driver gef_wdt_driver = {
 
 static int __init gef_wdt_init(void)
 {
-	printk(KERN_INFO "GE Fanuc watchdog driver\n");
+	printk(KERN_INFO "GE watchdog driver\n");
 	return of_register_platform_driver(&gef_wdt_driver);
 }
 
@@ -323,8 +323,8 @@ static void __exit gef_wdt_exit(void)
 module_init(gef_wdt_init);
 module_exit(gef_wdt_exit);
 
-MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com>");
-MODULE_DESCRIPTION("GE Fanuc watchdog driver");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
+MODULE_DESCRIPTION("GE watchdog driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 MODULE_ALIAS("platform: gef_wdt");
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
index 38252ff828ca..9b49b125ad5a 100644
--- a/drivers/watchdog/geodewdt.c
+++ b/drivers/watchdog/geodewdt.c
@@ -142,7 +142,7 @@ static long geodewdt_ioctl(struct file *file, unsigned int cmd,
 	int __user *p = argp;
 	int interval;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
 		| WDIOF_MAGICCLOSE,
 		.firmware_version =     1,
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index a6c5674c78e6..70c2c24660d0 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -554,7 +554,7 @@ static ssize_t hpwdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT |
 		   WDIOF_KEEPALIVEPING |
 		   WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index 7ba0b11ec525..bb9750a03942 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -34,7 +34,6 @@
 #include <linux/mm.h>
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
-#include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
@@ -42,7 +41,7 @@
 #include <linux/io.h>
 
 /* Module and version information */
-#define ESB_VERSION "0.04"
+#define ESB_VERSION "0.05"
 #define ESB_MODULE_NAME "i6300ESB timer"
 #define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION
 #define PFX ESB_MODULE_NAME ": "
@@ -65,7 +64,7 @@
 /* Config register bits */
 #define ESB_WDT_REBOOT  (0x01 << 5)   /* Enable reboot on timeout          */
 #define ESB_WDT_FREQ    (0x01 << 2)   /* Decrement frequency               */
-#define ESB_WDT_INTTYPE (0x11 << 0)   /* Interrupt type on timer1 timeout  */
+#define ESB_WDT_INTTYPE (0x03 << 0)   /* Interrupt type on timer1 timeout  */
 
 /* Reload register bits */
 #define ESB_WDT_TIMEOUT (0x01 << 9)    /* Watchdog timed out                */
@@ -82,7 +81,9 @@ static unsigned long timer_alive;
 static struct pci_dev *esb_pci;
 static unsigned short triggered; /* The status of the watchdog upon boot */
 static char esb_expect_close;
-static struct platform_device *esb_platform_device;
+
+/* We can only use 1 card due to the /dev/watchdog restriction */
+static int cards_found;
 
 /* module parameters */
 /* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
@@ -111,8 +112,8 @@ MODULE_PARM_DESC(nowayout,
  */
 static inline void esb_unlock_registers(void)
 {
-	writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
-	writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
+	writew(ESB_UNLOCK1, ESB_RELOAD_REG);
+	writew(ESB_UNLOCK2, ESB_RELOAD_REG);
 }
 
 static int esb_timer_start(void)
@@ -256,7 +257,7 @@ static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	int new_heartbeat;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
@@ -332,11 +333,6 @@ static struct miscdevice esb_miscdev = {
 
 /*
  * Data for PCI driver interface
- *
- * This data only exists for exporting the supported
- * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
- * register a pci_driver, because someone else might one day
- * want to register another driver on the same PCI id.
  */
 static struct pci_device_id esb_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
@@ -348,29 +344,19 @@ MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
  *      Init & exit routines
  */
 
-static unsigned char __devinit esb_getdevice(void)
+static unsigned char __devinit esb_getdevice(struct pci_dev *pdev)
 {
-	/*
-	 *      Find the PCI device
-	 */
-
-	esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
-					PCI_DEVICE_ID_INTEL_ESB_9, NULL);
-
-	if (!esb_pci)
-		return 0;
-
-	if (pci_enable_device(esb_pci)) {
+	if (pci_enable_device(pdev)) {
 		printk(KERN_ERR PFX "failed to enable device\n");
 		goto err_devput;
 	}
 
-	if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
+	if (pci_request_region(pdev, 0, ESB_MODULE_NAME)) {
 		printk(KERN_ERR PFX "failed to request region\n");
 		goto err_disable;
 	}
 
-	BASEADDR = pci_ioremap_bar(esb_pci, 0);
+	BASEADDR = pci_ioremap_bar(pdev, 0);
 	if (BASEADDR == NULL) {
 		/* Something's wrong here, BASEADDR has to be set */
 		printk(KERN_ERR PFX "failed to get BASEADDR\n");
@@ -378,14 +364,14 @@ static unsigned char __devinit esb_getdevice(void)
 	}
 
 	/* Done */
+	esb_pci = pdev;
 	return 1;
 
 err_release:
-	pci_release_region(esb_pci, 0);
+	pci_release_region(pdev, 0);
 err_disable:
-	pci_disable_device(esb_pci);
+	pci_disable_device(pdev);
 err_devput:
-	pci_dev_put(esb_pci);
 	return 0;
 }
 
@@ -430,12 +416,23 @@ static void __devinit esb_initdevice(void)
 	esb_timer_set_heartbeat(heartbeat);
 }
 
-static int __devinit esb_probe(struct platform_device *dev)
+static int __devinit esb_probe(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
 {
 	int ret;
 
+	cards_found++;
+	if (cards_found == 1)
+		printk(KERN_INFO PFX "Intel 6300ESB WatchDog Timer Driver v%s\n",
+			ESB_VERSION);
+
+	if (cards_found > 1) {
+		printk(KERN_ERR PFX "This driver only supports 1 device\n");
+		return -ENODEV;
+	}
+
 	/* Check whether or not the hardware watchdog is there */
-	if (!esb_getdevice() || esb_pci == NULL)
+	if (!esb_getdevice(pdev) || esb_pci == NULL)
 		return -ENODEV;
 
 	/* Check that the heartbeat value is within it's range;
@@ -467,11 +464,11 @@ err_unmap:
 	iounmap(BASEADDR);
 	pci_release_region(esb_pci, 0);
 	pci_disable_device(esb_pci);
-	pci_dev_put(esb_pci);
+	esb_pci = NULL;
 	return ret;
 }
 
-static int __devexit esb_remove(struct platform_device *dev)
+static void __devexit esb_remove(struct pci_dev *pdev)
 {
 	/* Stop the timer before we leave */
 	if (!nowayout)
@@ -482,54 +479,30 @@ static int __devexit esb_remove(struct platform_device *dev)
 	iounmap(BASEADDR);
 	pci_release_region(esb_pci, 0);
 	pci_disable_device(esb_pci);
-	pci_dev_put(esb_pci);
-	return 0;
+	esb_pci = NULL;
 }
 
-static void esb_shutdown(struct platform_device *dev)
+static void esb_shutdown(struct pci_dev *pdev)
 {
 	esb_timer_stop();
 }
 
-static struct platform_driver esb_platform_driver = {
+static struct pci_driver esb_driver = {
+	.name		= ESB_MODULE_NAME,
+	.id_table	= esb_pci_tbl,
 	.probe          = esb_probe,
 	.remove         = __devexit_p(esb_remove),
 	.shutdown       = esb_shutdown,
-	.driver         = {
-		.owner  = THIS_MODULE,
-		.name   = ESB_MODULE_NAME,
-	},
 };
 
 static int __init watchdog_init(void)
 {
-	int err;
-
-	printk(KERN_INFO PFX "Intel 6300ESB WatchDog Timer Driver v%s\n",
-		ESB_VERSION);
-
-	err = platform_driver_register(&esb_platform_driver);
-	if (err)
-		return err;
-
-	esb_platform_device = platform_device_register_simple(ESB_MODULE_NAME,
-								-1, NULL, 0);
-	if (IS_ERR(esb_platform_device)) {
-		err = PTR_ERR(esb_platform_device);
-		goto unreg_platform_driver;
-	}
-
-	return 0;
-
-unreg_platform_driver:
-	platform_driver_unregister(&esb_platform_driver);
-	return err;
+	return pci_register_driver(&esb_driver);
 }
 
 static void __exit watchdog_cleanup(void)
 {
-	platform_device_unregister(esb_platform_device);
-	platform_driver_unregister(&esb_platform_driver);
+	pci_unregister_driver(&esb_driver);
 	printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
 }
 
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 4bdb7f1a9077..44bc6aa46edf 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -584,7 +584,7 @@ static long iTCO_wdt_ioctl(struct file *file, unsigned int cmd,
 	int new_heartbeat;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
@@ -698,7 +698,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 	if (iTCO_wdt_private.iTCO_version == 2) {
 		pci_read_config_dword(pdev, 0xf0, &base_address);
 		if ((base_address & 1) == 0) {
-			printk(KERN_ERR PFX "RCBA is disabled by harddware\n");
+			printk(KERN_ERR PFX "RCBA is disabled by hardware\n");
 			ret = -ENODEV;
 			goto out;
 		}
@@ -708,8 +708,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 
 	/* Check chipset's NO_REBOOT bit */
 	if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
-		printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, "
-					"reboot disabled by hardware\n");
+		printk(KERN_INFO PFX "unable to reset NO_REBOOT flag, "
+					"platform may have disabled it\n");
 		ret = -ENODEV;	/* Cannot reset NO_REBOOT bit */
 		goto out_unmap;
 	}
@@ -805,6 +805,7 @@ static void __devexit iTCO_wdt_cleanup(void)
 
 static int __devinit iTCO_wdt_probe(struct platform_device *dev)
 {
+	int ret = -ENODEV;
 	int found = 0;
 	struct pci_dev *pdev = NULL;
 	const struct pci_device_id *ent;
@@ -814,19 +815,17 @@ static int __devinit iTCO_wdt_probe(struct platform_device *dev)
 	for_each_pci_dev(pdev) {
 		ent = pci_match_id(iTCO_wdt_pci_tbl, pdev);
 		if (ent) {
-			if (!(iTCO_wdt_init(pdev, ent, dev))) {
-				found++;
+			found++;
+			ret = iTCO_wdt_init(pdev, ent, dev);
+			if (!ret)
 				break;
-			}
 		}
 	}
 
-	if (!found) {
+	if (!found)
 		printk(KERN_INFO PFX "No card detected\n");
-		return -ENODEV;
-	}
 
-	return 0;
+	return ret;
 }
 
 static int __devexit iTCO_wdt_remove(struct platform_device *dev)
diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c
index 4bef3ddff4a5..0149d8dfc81d 100644
--- a/drivers/watchdog/ib700wdt.c
+++ b/drivers/watchdog/ib700wdt.c
@@ -174,7 +174,7 @@ static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
 							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c
index bea8a124a559..1cc5609666d1 100644
--- a/drivers/watchdog/indydog.c
+++ b/drivers/watchdog/indydog.c
@@ -111,7 +111,7 @@ static long indydog_ioctl(struct file *file, unsigned int cmd,
 							unsigned long arg)
 {
 	int options, retval = -EINVAL;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options		= WDIOF_KEEPALIVEPING,
 		.firmware_version	= 0,
 		.identity		= "Hardware Watchdog for SGI IP22",
diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c
index daed48ded7fe..f52c162b1bea 100644
--- a/drivers/watchdog/it8712f_wdt.c
+++ b/drivers/watchdog/it8712f_wdt.c
@@ -236,7 +236,7 @@ static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd,
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.identity = "IT8712F Watchdog",
 		.firmware_version = 1,
 		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
index cc133c531d08..b709b3b2d1ef 100644
--- a/drivers/watchdog/it87_wdt.c
+++ b/drivers/watchdog/it87_wdt.c
@@ -421,7 +421,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf,
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
 	.firmware_version =	1,
 	.identity = WATCHDOG_NAME,
diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c
index 3c79dc587958..e86952a7168c 100644
--- a/drivers/watchdog/ixp2000_wdt.c
+++ b/drivers/watchdog/ixp2000_wdt.c
@@ -100,7 +100,7 @@ static ssize_t ixp2000_wdt_write(struct file *file, const char *data,
 }
 
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
 				WDIOF_KEEPALIVEPING,
 	.identity	= "IXP2000 Watchdog",
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
index 147b4d5c63b3..e02c0ecda26b 100644
--- a/drivers/watchdog/ixp4xx_wdt.c
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -89,7 +89,7 @@ ixp4xx_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
 			  WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity	= "IXP4xx Watchdog",
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index e1c82769b08e..2852bb2e3fd9 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -145,7 +145,7 @@ static int ks8695_wdt_close(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static struct watchdog_info ks8695_wdt_info = {
+static const struct watchdog_info ks8695_wdt_info = {
 	.identity	= "ks8695 watchdog",
 	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 };
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
index 47d719717a3b..2d118cf022fc 100644
--- a/drivers/watchdog/machzwd.c
+++ b/drivers/watchdog/machzwd.c
@@ -101,7 +101,7 @@ MODULE_PARM_DESC(nowayout,
 
 #define PFX "machzwd"
 
-static struct watchdog_info zf_info = {
+static const struct watchdog_info zf_info = {
 	.options		= WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.firmware_version	= 1,
 	.identity		= "ZF-Logic watchdog",
diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c
new file mode 100644
index 000000000000..6eb91d757604
--- /dev/null
+++ b/drivers/watchdog/max63xx_wdt.c
@@ -0,0 +1,397 @@
+/*
+ * drivers/char/watchdog/max63xx_wdt.c
+ *
+ * Driver for max63{69,70,71,72,73,74} watchdog timers
+ *
+ * Copyright (C) 2009 Marc Zyngier <maz@misterjones.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This driver assumes the watchdog pins are memory mapped (as it is
+ * the case for the Arcom Zeus). Should it be connected over GPIOs or
+ * another interface, some abstraction will have to be introduced.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/device.h>
+
+#define DEFAULT_HEARTBEAT 60
+#define MAX_HEARTBEAT     60
+
+static int heartbeat = DEFAULT_HEARTBEAT;
+static int nowayout  = WATCHDOG_NOWAYOUT;
+
+/*
+ * Memory mapping: a single byte, 3 first lower bits to select bit 3
+ * to ping the watchdog.
+ */
+#define MAX6369_WDSET	(7 << 0)
+#define MAX6369_WDI   	(1 << 3)
+
+static DEFINE_SPINLOCK(io_lock);
+
+static unsigned long wdt_status;
+#define WDT_IN_USE	0
+#define WDT_RUNNING	1
+#define WDT_OK_TO_CLOSE 2
+
+static int nodelay;
+static struct resource	*wdt_mem;
+static void __iomem	*wdt_base;
+static struct platform_device *max63xx_pdev;
+
+/*
+ * The timeout values used are actually the absolute minimum the chip
+ * offers. Typical values on my board are slightly over twice as long
+ * (10s setting ends up with a 25s timeout), and can be up to 3 times
+ * the nominal setting (according to the datasheet). So please take
+ * these values with a grain of salt. Same goes for the initial delay
+ * "feature". Only max6373/74 have a few settings without this initial
+ * delay (selected with the "nodelay" parameter).
+ *
+ * I also decided to remove from the tables any timeout smaller than a
+ * second, as it looked completly overkill...
+ */
+
+/* Timeouts in second */
+struct max63xx_timeout {
+	u8 wdset;
+	u8 tdelay;
+	u8 twd;
+};
+
+static struct max63xx_timeout max6369_table[] = {
+	{ 5,  1,  1 },
+	{ 6, 10, 10 },
+	{ 7, 60, 60 },
+	{ },
+};
+
+static struct max63xx_timeout max6371_table[] = {
+	{ 6, 60,  3 },
+	{ 7, 60, 60 },
+	{ },
+};
+
+static struct max63xx_timeout max6373_table[] = {
+	{ 2, 60,  1 },
+	{ 5,  0,  1 },
+	{ 1,  3,  3 },
+	{ 7, 60, 10 },
+	{ 6,  0, 10 },
+	{ },
+};
+
+static struct max63xx_timeout *current_timeout;
+
+static struct max63xx_timeout *
+max63xx_select_timeout(struct max63xx_timeout *table, int value)
+{
+	while (table->twd) {
+		if (value <= table->twd) {
+			if (nodelay && table->tdelay == 0)
+				return table;
+
+			if (!nodelay)
+				return table;
+		}
+
+		table++;
+	}
+
+	return NULL;
+}
+
+static void max63xx_wdt_ping(void)
+{
+	u8 val;
+
+	spin_lock(&io_lock);
+
+	val = __raw_readb(wdt_base);
+
+	__raw_writeb(val | MAX6369_WDI, wdt_base);
+	__raw_writeb(val & ~MAX6369_WDI, wdt_base);
+
+	spin_unlock(&io_lock);
+}
+
+static void max63xx_wdt_enable(struct max63xx_timeout *entry)
+{
+	u8 val;
+
+	if (test_and_set_bit(WDT_RUNNING, &wdt_status))
+		return;
+
+	spin_lock(&io_lock);
+
+	val = __raw_readb(wdt_base);
+	val &= ~MAX6369_WDSET;
+	val |= entry->wdset;
+	__raw_writeb(val, wdt_base);
+
+	spin_unlock(&io_lock);
+
+	/* check for a edge triggered startup */
+	if (entry->tdelay == 0)
+		max63xx_wdt_ping();
+}
+
+static void max63xx_wdt_disable(void)
+{
+	spin_lock(&io_lock);
+
+	__raw_writeb(3, wdt_base);
+
+	spin_unlock(&io_lock);
+
+	clear_bit(WDT_RUNNING, &wdt_status);
+}
+
+static int max63xx_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
+		return -EBUSY;
+
+	max63xx_wdt_enable(current_timeout);
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t max63xx_wdt_write(struct file *file, const char *data,
+				 size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+
+				if (c == 'V')
+					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
+			}
+		}
+
+		max63xx_wdt_ping();
+	}
+
+	return len;
+}
+
+static const struct watchdog_info ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "max63xx Watchdog",
+};
+
+static long max63xx_wdt_ioctl(struct file *file, unsigned int cmd,
+			      unsigned long arg)
+{
+	int ret = -ENOTTY;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info *)arg, &ident,
+				   sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(0, (int *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		max63xx_wdt_ping();
+		ret = 0;
+		break;
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(heartbeat, (int *)arg);
+		break;
+	}
+	return ret;
+}
+
+static int max63xx_wdt_release(struct inode *inode, struct file *file)
+{
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
+		max63xx_wdt_disable();
+	else
+		dev_crit(&max63xx_pdev->dev,
+			 "device closed unexpectedly - timer will not stop\n");
+
+	clear_bit(WDT_IN_USE, &wdt_status);
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	return 0;
+}
+
+static const struct file_operations max63xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= max63xx_wdt_write,
+	.unlocked_ioctl	= max63xx_wdt_ioctl,
+	.open		= max63xx_wdt_open,
+	.release	= max63xx_wdt_release,
+};
+
+static struct miscdevice max63xx_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &max63xx_wdt_fops,
+};
+
+static int __devinit max63xx_wdt_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	int size;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct max63xx_timeout *table;
+
+	table = (struct max63xx_timeout *)pdev->id_entry->driver_data;
+
+	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
+		heartbeat = DEFAULT_HEARTBEAT;
+
+	dev_info(dev, "requesting %ds heartbeat\n", heartbeat);
+	current_timeout = max63xx_select_timeout(table, heartbeat);
+
+	if (!current_timeout) {
+		dev_err(dev, "unable to satisfy heartbeat request\n");
+		return -EINVAL;
+	}
+
+	dev_info(dev, "using %ds heartbeat with %ds initial delay\n",
+		 current_timeout->twd, current_timeout->tdelay);
+
+	heartbeat = current_timeout->twd;
+
+	max63xx_pdev = pdev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "failed to get memory region resource\n");
+		return -ENOENT;
+	}
+
+	size = resource_size(res);
+	wdt_mem = request_mem_region(res->start, size, pdev->name);
+
+	if (wdt_mem == NULL) {
+		dev_err(dev, "failed to get memory region\n");
+		return -ENOENT;
+	}
+
+	wdt_base = ioremap(res->start, size);
+	if (!wdt_base) {
+		dev_err(dev, "failed to map memory region\n");
+		ret = -ENOMEM;
+		goto out_request;
+	}
+
+	ret = misc_register(&max63xx_wdt_miscdev);
+	if (ret < 0) {
+		dev_err(dev, "cannot register misc device\n");
+		goto out_unmap;
+	}
+
+	return 0;
+
+out_unmap:
+	iounmap(wdt_base);
+out_request:
+	release_resource(wdt_mem);
+	kfree(wdt_mem);
+
+	return ret;
+}
+
+static int __devexit max63xx_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&max63xx_wdt_miscdev);
+	if (wdt_mem) {
+		release_resource(wdt_mem);
+		kfree(wdt_mem);
+		wdt_mem = NULL;
+	}
+
+	if (wdt_base)
+		iounmap(wdt_base);
+
+	return 0;
+}
+
+static struct platform_device_id max63xx_id_table[] = {
+	{ "max6369_wdt", (kernel_ulong_t)max6369_table, },
+	{ "max6370_wdt", (kernel_ulong_t)max6369_table, },
+	{ "max6371_wdt", (kernel_ulong_t)max6371_table, },
+	{ "max6372_wdt", (kernel_ulong_t)max6371_table, },
+	{ "max6373_wdt", (kernel_ulong_t)max6373_table, },
+	{ "max6374_wdt", (kernel_ulong_t)max6373_table, },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, max63xx_id_table);
+
+static struct platform_driver max63xx_wdt_driver = {
+	.probe		= max63xx_wdt_probe,
+	.remove		= __devexit_p(max63xx_wdt_remove),
+	.id_table	= max63xx_id_table,
+	.driver		= {
+		.name	= "max63xx_wdt",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init max63xx_wdt_init(void)
+{
+	return platform_driver_register(&max63xx_wdt_driver);
+}
+
+static void __exit max63xx_wdt_exit(void)
+{
+	platform_driver_unregister(&max63xx_wdt_driver);
+}
+
+module_init(max63xx_wdt_init);
+module_exit(max63xx_wdt_exit);
+
+MODULE_AUTHOR("Marc Zyngier <maz@misterjones.org>");
+MODULE_DESCRIPTION("max63xx Watchdog Driver");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+		 "Watchdog heartbeat period in seconds from 1 to "
+		 __MODULE_STRING(MAX_HEARTBEAT) ", default "
+		 __MODULE_STRING(DEFAULT_HEARTBEAT));
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+module_param(nodelay, int, 0);
+MODULE_PARM_DESC(nodelay,
+		 "Force selection of a timeout setting without initial delay "
+		 "(max6373/74 only, default=0)");
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c
index 407b025cb104..bc820d16699a 100644
--- a/drivers/watchdog/mixcomwd.c
+++ b/drivers/watchdog/mixcomwd.c
@@ -201,7 +201,7 @@ static long mixcomwd_ioctl(struct file *file,
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int status;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "MixCOM watchdog",
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index 38c588ee694f..4e3941c5e293 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -148,7 +148,7 @@ static long mpc8xxx_wdt_ioctl(struct file *file, unsigned int cmd,
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING,
 		.firmware_version = 1,
 		.identity = "MPC8xxx",
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index a2dc07c2ed49..b0646dac924e 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -213,7 +213,7 @@ static ssize_t mpcore_wdt_write(struct file *file, const char *data,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options		= WDIOF_SETTIMEOUT |
 				  WDIOF_KEEPALIVEPING |
 				  WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c
index a51dbe4c43da..97f8a48d8b78 100644
--- a/drivers/watchdog/mv64x60_wdt.c
+++ b/drivers/watchdog/mv64x60_wdt.c
@@ -179,7 +179,7 @@ static long mv64x60_wdt_ioctl(struct file *file,
 	int timeout;
 	int options;
 	void __user *argp = (void __user *)arg;
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options =	WDIOF_SETTIMEOUT	|
 				WDIOF_MAGICCLOSE	|
 				WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 1a2b916e3f8d..d3aa2f1fe61d 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -407,7 +407,7 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd,
 		int __user *i;
 	} uarg;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options          = WDIOF_KEEPALIVEPING |
 				    WDIOF_SETTIMEOUT |
 				    WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c
index aa9512321f3a..06f7922606c0 100644
--- a/drivers/watchdog/pcwd.c
+++ b/drivers/watchdog/pcwd.c
@@ -606,7 +606,7 @@ static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	int temperature;
 	int new_heartbeat;
 	int __user *argp = (int __user *)arg;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_OVERHEAT |
 					WDIOF_CARDRESET |
 					WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c
index 698f51bff1bc..64374d636f09 100644
--- a/drivers/watchdog/pcwd_pci.c
+++ b/drivers/watchdog/pcwd_pci.c
@@ -481,7 +481,7 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd,
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_OVERHEAT |
 					WDIOF_CARDRESET |
 					WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c
index 052fe451851f..8e4eacc5bb52 100644
--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -404,7 +404,7 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd,
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_KEEPALIVEPING |
 					WDIOF_SETTIMEOUT |
 					WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/pika_wdt.c b/drivers/watchdog/pika_wdt.c
index 2d22e996e996..435ec2aed4fe 100644
--- a/drivers/watchdog/pika_wdt.c
+++ b/drivers/watchdog/pika_wdt.c
@@ -52,7 +52,7 @@ static struct {
 	struct timer_list timer;	/* The timer that pings the watchdog */
 } pikawdt_private;
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.identity	= DRV_NAME,
 	.options	= WDIOF_CARDRESET |
 			  WDIOF_SETTIMEOUT |
diff --git a/drivers/watchdog/pnx833x_wdt.c b/drivers/watchdog/pnx833x_wdt.c
index 538ec2c05197..09102f09e681 100644
--- a/drivers/watchdog/pnx833x_wdt.c
+++ b/drivers/watchdog/pnx833x_wdt.c
@@ -141,7 +141,7 @@ static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd,
 	int options, new_timeout = 0;
 	uint32_t timeout, timeout_left = 0;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
 		.firmware_version = 0,
 		.identity = "Hardware Watchdog for PNX833x",
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index bf12d06b5877..d4c29b5311a4 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -198,7 +198,7 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
 	void __user *argp = (void __user *)arg;
 	int new_timeout;
 	unsigned int value;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
index 4976bfd1fce6..69c6adbd8205 100644
--- a/drivers/watchdog/rdc321x_wdt.c
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -149,7 +149,7 @@ static long rdc321x_wdt_ioctl(struct file *file, unsigned int cmd,
 {
 	void __user *argp = (void __user *)arg;
 	unsigned int value;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_CARDRESET,
 		.identity = "RDC321x WDT",
 	};
diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c
index c14ae8676903..ae57bf9e1b03 100644
--- a/drivers/watchdog/riowd.c
+++ b/drivers/watchdog/riowd.c
@@ -85,7 +85,7 @@ static int riowd_release(struct inode *inode, struct file *filp)
 
 static long riowd_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options		= WDIOF_SETTIMEOUT,
 		.firmware_version	= 1,
 		.identity		= DRIVER_NAME,
diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c
index e6763d2a567b..8d44c9b6fb5b 100644
--- a/drivers/watchdog/sbc_fitpc2_wdt.c
+++ b/drivers/watchdog/sbc_fitpc2_wdt.c
@@ -111,7 +111,7 @@ out:
 }
 
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
 				WDIOF_KEEPALIVEPING,
 	.identity	= WATCHDOG_NAME,
diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c
index 569eb295a7a8..9c40f48804f5 100644
--- a/drivers/watchdog/sch311x_wdt.c
+++ b/drivers/watchdog/sch311x_wdt.c
@@ -250,7 +250,7 @@ static long sch311x_wdt_ioctl(struct file *file, unsigned int cmd,
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options		= WDIOF_KEEPALIVEPING |
 					  WDIOF_SETTIMEOUT |
 					  WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c
index 5dd952681f32..b3421fd2cda8 100644
--- a/drivers/watchdog/stmp3xxx_wdt.c
+++ b/drivers/watchdog/stmp3xxx_wdt.c
@@ -94,7 +94,7 @@ static ssize_t stmp3xxx_wdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_CARDRESET |
 			  WDIOF_MAGICCLOSE |
 			  WDIOF_SETTIMEOUT |
diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c
new file mode 100644
index 000000000000..565a2c3321e5
--- /dev/null
+++ b/drivers/watchdog/ts72xx_wdt.c
@@ -0,0 +1,520 @@
+/*
+ * Watchdog driver for Technologic Systems TS-72xx based SBCs
+ * (TS-7200, TS-7250 and TS-7260). These boards have external
+ * glue logic CPLD chip, which includes programmable watchdog
+ * timer.
+ *
+ * Copyright (c) 2009 Mika Westerberg <mika.westerberg@iki.fi>
+ *
+ * This driver is based on ep93xx_wdt and wm831x_wdt drivers.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/miscdevice.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+
+#define TS72XX_WDT_FEED_VAL		0x05
+#define TS72XX_WDT_DEFAULT_TIMEOUT	8
+
+static int timeout = TS72XX_WDT_DEFAULT_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. "
+			  "(1 <= timeout <= 8, default="
+			  __MODULE_STRING(TS72XX_WDT_DEFAULT_TIMEOUT)
+			  ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+/**
+ * struct ts72xx_wdt - watchdog control structure
+ * @lock: lock that protects this structure
+ * @regval: watchdog timeout value suitable for control register
+ * @flags: flags controlling watchdog device state
+ * @control_reg: watchdog control register
+ * @feed_reg: watchdog feed register
+ * @pdev: back pointer to platform dev
+ */
+struct ts72xx_wdt {
+	struct mutex	lock;
+	int		regval;
+
+#define TS72XX_WDT_BUSY_FLAG		1
+#define TS72XX_WDT_EXPECT_CLOSE_FLAG	2
+	int		flags;
+
+	void __iomem	*control_reg;
+	void __iomem	*feed_reg;
+
+	struct platform_device *pdev;
+};
+
+struct platform_device *ts72xx_wdt_pdev;
+
+/*
+ * TS-72xx Watchdog supports following timeouts (value written
+ * to control register):
+ *	value	description
+ *	-------------------------
+ * 	0x00	watchdog disabled
+ *	0x01	250ms
+ *	0x02	500ms
+ *	0x03	1s
+ *	0x04	reserved
+ *	0x05	2s
+ *	0x06	4s
+ *	0x07	8s
+ *
+ * Timeouts below 1s are not very usable so we don't
+ * allow them at all.
+ *
+ * We provide two functions that convert between these:
+ * timeout_to_regval() and regval_to_timeout().
+ */
+static const struct {
+	int	timeout;
+	int	regval;
+} ts72xx_wdt_map[] = {
+	{ 1, 3 },
+	{ 2, 5 },
+	{ 4, 6 },
+	{ 8, 7 },
+};
+
+/**
+ * timeout_to_regval() - converts given timeout to control register value
+ * @new_timeout: timeout in seconds to be converted
+ *
+ * Function converts given @new_timeout into valid value that can
+ * be programmed into watchdog control register. When conversion is
+ * not possible, function returns %-EINVAL.
+ */
+static int timeout_to_regval(int new_timeout)
+{
+	int i;
+
+	/* first limit it to 1 - 8 seconds */
+	new_timeout = clamp_val(new_timeout, 1, 8);
+
+	for (i = 0; i < ARRAY_SIZE(ts72xx_wdt_map); i++) {
+		if (ts72xx_wdt_map[i].timeout >= new_timeout)
+			return ts72xx_wdt_map[i].regval;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * regval_to_timeout() - converts control register value to timeout
+ * @regval: control register value to be converted
+ *
+ * Function converts given @regval to timeout in seconds (1, 2, 4 or 8).
+ * If @regval cannot be converted, function returns %-EINVAL.
+ */
+static int regval_to_timeout(int regval)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ts72xx_wdt_map); i++) {
+		if (ts72xx_wdt_map[i].regval == regval)
+			return ts72xx_wdt_map[i].timeout;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * ts72xx_wdt_kick() - kick the watchdog
+ * @wdt: watchdog to be kicked
+ *
+ * Called with @wdt->lock held.
+ */
+static inline void ts72xx_wdt_kick(struct ts72xx_wdt *wdt)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, wdt->feed_reg);
+}
+
+/**
+ * ts72xx_wdt_start() - starts the watchdog timer
+ * @wdt: watchdog to be started
+ *
+ * This function programs timeout to watchdog timer
+ * and starts it.
+ *
+ * Called with @wdt->lock held.
+ */
+static void ts72xx_wdt_start(struct ts72xx_wdt *wdt)
+{
+	/*
+	 * To program the wdt, it first must be "fed" and
+	 * only after that (within 30 usecs) the configuration
+	 * can be changed.
+	 */
+	ts72xx_wdt_kick(wdt);
+	__raw_writeb((u8)wdt->regval, wdt->control_reg);
+}
+
+/**
+ * ts72xx_wdt_stop() - stops the watchdog timer
+ * @wdt: watchdog to be stopped
+ *
+ * Called with @wdt->lock held.
+ */
+static void ts72xx_wdt_stop(struct ts72xx_wdt *wdt)
+{
+	ts72xx_wdt_kick(wdt);
+	__raw_writeb(0, wdt->control_reg);
+}
+
+static int ts72xx_wdt_open(struct inode *inode, struct file *file)
+{
+	struct ts72xx_wdt *wdt = platform_get_drvdata(ts72xx_wdt_pdev);
+	int regval;
+
+	/*
+	 * Try to convert default timeout to valid register
+	 * value first.
+	 */
+	regval = timeout_to_regval(timeout);
+	if (regval < 0) {
+		dev_err(&wdt->pdev->dev,
+			"failed to convert timeout (%d) to register value\n",
+			timeout);
+		return -EINVAL;
+	}
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	if ((wdt->flags & TS72XX_WDT_BUSY_FLAG) != 0) {
+		mutex_unlock(&wdt->lock);
+		return -EBUSY;
+	}
+
+	wdt->flags = TS72XX_WDT_BUSY_FLAG;
+	wdt->regval = regval;
+	file->private_data = wdt;
+
+	ts72xx_wdt_start(wdt);
+
+	mutex_unlock(&wdt->lock);
+	return nonseekable_open(inode, file);
+}
+
+static int ts72xx_wdt_release(struct inode *inode, struct file *file)
+{
+	struct ts72xx_wdt *wdt = file->private_data;
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	if ((wdt->flags & TS72XX_WDT_EXPECT_CLOSE_FLAG) != 0) {
+		ts72xx_wdt_stop(wdt);
+	} else {
+		dev_warn(&wdt->pdev->dev,
+			 "TS-72XX WDT device closed unexpectly. "
+			 "Watchdog timer will not stop!\n");
+		/*
+		 * Kick it one more time, to give userland some time
+		 * to recover (for example, respawning the kicker
+		 * daemon).
+		 */
+		ts72xx_wdt_kick(wdt);
+	}
+
+	wdt->flags = 0;
+
+	mutex_unlock(&wdt->lock);
+	return 0;
+}
+
+static ssize_t ts72xx_wdt_write(struct file *file,
+				const char __user *data,
+				size_t len,
+				loff_t *ppos)
+{
+	struct ts72xx_wdt *wdt = file->private_data;
+
+	if (!len)
+		return 0;
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	ts72xx_wdt_kick(wdt);
+
+	/*
+	 * Support for magic character closing. User process
+	 * writes 'V' into the device, just before it is closed.
+	 * This means that we know that the wdt timer can be
+	 * stopped after user closes the device.
+	 */
+	if (!nowayout) {
+		int i;
+
+		for (i = 0; i < len; i++) {
+			char c;
+
+			/* In case it was set long ago */
+			wdt->flags &= ~TS72XX_WDT_EXPECT_CLOSE_FLAG;
+
+			if (get_user(c, data + i)) {
+				mutex_unlock(&wdt->lock);
+				return -EFAULT;
+			}
+			if (c == 'V') {
+				wdt->flags |= TS72XX_WDT_EXPECT_CLOSE_FLAG;
+				break;
+			}
+		}
+	}
+
+	mutex_unlock(&wdt->lock);
+	return len;
+}
+
+static const struct watchdog_info winfo = {
+	.options		= WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+				  WDIOF_MAGICCLOSE,
+	.firmware_version	= 1,
+	.identity		= "TS-72XX WDT",
+};
+
+static long ts72xx_wdt_ioctl(struct file *file, unsigned int cmd,
+			     unsigned long arg)
+{
+	struct ts72xx_wdt *wdt = file->private_data;
+	void __user *argp = (void __user *)arg;
+	int __user *p = (int __user *)argp;
+	int error = 0;
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		error = copy_to_user(argp, &winfo, sizeof(winfo));
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		ts72xx_wdt_kick(wdt);
+		break;
+
+	case WDIOC_SETOPTIONS: {
+		int options;
+
+		if (get_user(options, p)) {
+			error = -EFAULT;
+			break;
+		}
+
+		error = -EINVAL;
+
+		if ((options & WDIOS_DISABLECARD) != 0) {
+			ts72xx_wdt_stop(wdt);
+			error = 0;
+		}
+		if ((options & WDIOS_ENABLECARD) != 0) {
+			ts72xx_wdt_start(wdt);
+			error = 0;
+		}
+
+		break;
+	}
+
+	case WDIOC_SETTIMEOUT: {
+		int new_timeout;
+
+		if (get_user(new_timeout, p)) {
+			error = -EFAULT;
+		} else {
+			int regval;
+
+			regval = timeout_to_regval(new_timeout);
+			if (regval < 0) {
+				error = -EINVAL;
+			} else {
+				ts72xx_wdt_stop(wdt);
+				wdt->regval = regval;
+				ts72xx_wdt_start(wdt);
+			}
+		}
+		if (error)
+			break;
+
+		/*FALLTHROUGH*/
+	}
+
+	case WDIOC_GETTIMEOUT:
+		if (put_user(regval_to_timeout(wdt->regval), p))
+			error = -EFAULT;
+		break;
+
+	default:
+		error = -ENOTTY;
+		break;
+	}
+
+	mutex_unlock(&wdt->lock);
+	return error;
+}
+
+static const struct file_operations ts72xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.open		= ts72xx_wdt_open,
+	.release	= ts72xx_wdt_release,
+	.write		= ts72xx_wdt_write,
+	.unlocked_ioctl	= ts72xx_wdt_ioctl,
+};
+
+static struct miscdevice ts72xx_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &ts72xx_wdt_fops,
+};
+
+static __devinit int ts72xx_wdt_probe(struct platform_device *pdev)
+{
+	struct ts72xx_wdt *wdt;
+	struct resource *r1, *r2;
+	int error = 0;
+
+	wdt = kzalloc(sizeof(struct ts72xx_wdt), GFP_KERNEL);
+	if (!wdt) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	r1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r1) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		error = -ENODEV;
+		goto fail;
+	}
+
+	r1 = request_mem_region(r1->start, resource_size(r1), pdev->name);
+	if (!r1) {
+		dev_err(&pdev->dev, "cannot request memory region\n");
+		error = -EBUSY;
+		goto fail;
+	}
+
+	wdt->control_reg = ioremap(r1->start, resource_size(r1));
+	if (!wdt->control_reg) {
+		dev_err(&pdev->dev, "failed to map memory\n");
+		error = -ENODEV;
+		goto fail_free_control;
+	}
+
+	r2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!r2) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		error = -ENODEV;
+		goto fail_unmap_control;
+	}
+
+	r2 = request_mem_region(r2->start, resource_size(r2), pdev->name);
+	if (!r2) {
+		dev_err(&pdev->dev, "cannot request memory region\n");
+		error = -EBUSY;
+		goto fail_unmap_control;
+	}
+
+	wdt->feed_reg = ioremap(r2->start, resource_size(r2));
+	if (!wdt->feed_reg) {
+		dev_err(&pdev->dev, "failed to map memory\n");
+		error = -ENODEV;
+		goto fail_free_feed;
+	}
+
+	platform_set_drvdata(pdev, wdt);
+	ts72xx_wdt_pdev = pdev;
+	wdt->pdev = pdev;
+	mutex_init(&wdt->lock);
+
+	error = misc_register(&ts72xx_wdt_miscdev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register miscdev\n");
+		goto fail_unmap_feed;
+	}
+
+	dev_info(&pdev->dev, "TS-72xx Watchdog driver\n");
+
+	return 0;
+
+fail_unmap_feed:
+	platform_set_drvdata(pdev, NULL);
+	iounmap(wdt->feed_reg);
+fail_free_feed:
+	release_mem_region(r2->start, resource_size(r2));
+fail_unmap_control:
+	iounmap(wdt->control_reg);
+fail_free_control:
+	release_mem_region(r1->start, resource_size(r1));
+fail:
+	kfree(wdt);
+	return error;
+}
+
+static __devexit int ts72xx_wdt_remove(struct platform_device *pdev)
+{
+	struct ts72xx_wdt *wdt = platform_get_drvdata(pdev);
+	struct resource *res;
+	int error;
+
+	error = misc_deregister(&ts72xx_wdt_miscdev);
+	platform_set_drvdata(pdev, NULL);
+
+	iounmap(wdt->feed_reg);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	release_mem_region(res->start, resource_size(res));
+
+	iounmap(wdt->control_reg);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(wdt);
+	return error;
+}
+
+static struct platform_driver ts72xx_wdt_driver = {
+	.probe		= ts72xx_wdt_probe,
+	.remove		= __devexit_p(ts72xx_wdt_remove),
+	.driver		= {
+		.name	= "ts72xx-wdt",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static __init int ts72xx_wdt_init(void)
+{
+	return platform_driver_register(&ts72xx_wdt_driver);
+}
+module_init(ts72xx_wdt_init);
+
+static __exit void ts72xx_wdt_exit(void)
+{
+	platform_driver_unregister(&ts72xx_wdt_driver);
+}
+module_exit(ts72xx_wdt_exit);
+
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
+MODULE_DESCRIPTION("TS-72xx SBC Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ts72xx-wdt");
diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c
index d635566e9307..9e9ed7bfabcb 100644
--- a/drivers/watchdog/txx9wdt.c
+++ b/drivers/watchdog/txx9wdt.c
@@ -13,7 +13,6 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/fs.h>
-#include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
 #include <linux/platform_device.h>
@@ -166,14 +165,6 @@ static long txx9wdt_ioctl(struct file *file, unsigned int cmd,
 	}
 }
 
-static int txx9wdt_notify_sys(struct notifier_block *this, unsigned long code,
-	void *unused)
-{
-	if (code == SYS_DOWN || code == SYS_HALT)
-		txx9wdt_stop();
-	return NOTIFY_DONE;
-}
-
 static const struct file_operations txx9wdt_fops = {
 	.owner		=	THIS_MODULE,
 	.llseek		=	no_llseek,
@@ -189,10 +180,6 @@ static struct miscdevice txx9wdt_miscdev = {
 	.fops	=	&txx9wdt_fops,
 };
 
-static struct notifier_block txx9wdt_notifier = {
-	.notifier_call = txx9wdt_notify_sys,
-};
-
 static int __init txx9wdt_probe(struct platform_device *dev)
 {
 	struct resource *res;
@@ -221,13 +208,8 @@ static int __init txx9wdt_probe(struct platform_device *dev)
 	if (!txx9wdt_reg)
 		goto exit_busy;
 
-	ret = register_reboot_notifier(&txx9wdt_notifier);
-	if (ret)
-		goto exit;
-
 	ret = misc_register(&txx9wdt_miscdev);
 	if (ret) {
-		unregister_reboot_notifier(&txx9wdt_notifier);
 		goto exit;
 	}
 
@@ -249,14 +231,19 @@ exit:
 static int __exit txx9wdt_remove(struct platform_device *dev)
 {
 	misc_deregister(&txx9wdt_miscdev);
-	unregister_reboot_notifier(&txx9wdt_notifier);
 	clk_disable(txx9_imclk);
 	clk_put(txx9_imclk);
 	return 0;
 }
 
+static void txx9wdt_shutdown(struct platform_device *dev)
+{
+	txx9wdt_stop();
+}
+
 static struct platform_driver txx9wdt_driver = {
 	.remove = __exit_p(txx9wdt_remove),
+	.shutdown = txx9wdt_shutdown,
 	.driver = {
 		.name = "txx9wdt",
 		.owner = THIS_MODULE,
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index f201accc4e3d..0f5288df0091 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -201,7 +201,7 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_timeout;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
 							WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c
index 0560182a1d09..6e6743d1066f 100644
--- a/drivers/watchdog/w83977f_wdt.c
+++ b/drivers/watchdog/w83977f_wdt.c
@@ -371,7 +371,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf,
  *      according to their available features.
  */
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
 	.firmware_version =	1,
 	.identity = WATCHDOG_NAME,
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index 5bfb1f2c5319..94ec22b9e66b 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -312,7 +312,7 @@ static long wdrtas_ioctl(struct file *file, unsigned int cmd,
 {
 	int __user *argp = (void __user *)arg;
 	int i;
-	static struct watchdog_info wdinfo = {
+	static const struct watchdog_info wdinfo = {
 		.options = WDRTAS_SUPPORTED_MASK,
 		.firmware_version = 0,
 		.identity = "wdrtas",
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index 3bbefe9a2634..bfda2e99dd89 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -358,7 +358,7 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	int new_heartbeat;
 	int status;
 
-	static struct watchdog_info ident = {
+	struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT|
 					WDIOF_MAGICCLOSE|
 					WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index f368dd87083a..7b22e3cdbc81 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -412,7 +412,7 @@ static long wdtpci_ioctl(struct file *file, unsigned int cmd,
 	int new_heartbeat;
 	int status;
 
-	static struct watchdog_info ident = {
+	struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT|
 					WDIOF_MAGICCLOSE|
 					WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
index 775bcd807f31..8c4b2d5bb7da 100644
--- a/drivers/watchdog/wm831x_wdt.c
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -213,7 +213,7 @@ static ssize_t wm831x_wdt_write(struct file *file,
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.identity = "WM831x Watchdog",
 };
diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c
index a2d2e8eb2282..89dd7b035295 100644
--- a/drivers/watchdog/wm8350_wdt.c
+++ b/drivers/watchdog/wm8350_wdt.c
@@ -177,7 +177,7 @@ static ssize_t wm8350_wdt_write(struct file *file,
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.identity = "WM8350 Watchdog",
 };
diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c
index ae5cb05a1a1c..bb71ab2336c8 100644
--- a/drivers/xen/sys-hypervisor.c
+++ b/drivers/xen/sys-hypervisor.c
@@ -426,7 +426,7 @@ static ssize_t hyp_sysfs_store(struct kobject *kobj,
 	return 0;
 }
 
-static struct sysfs_ops hyp_sysfs_ops = {
+static const struct sysfs_ops hyp_sysfs_ops = {
 	.show = hyp_sysfs_show,
 	.store = hyp_sysfs_store,
 };
diff --git a/drivers/zorro/zorro.ids b/drivers/zorro/zorro.ids
index 0c0f99e2dd62..de24e3decedd 100644
--- a/drivers/zorro/zorro.ids
+++ b/drivers/zorro/zorro.ids
@@ -108,7 +108,7 @@
 	0c00  500XP/SupraDrive WordSync [SCSI Host Adapter]
 	0d00  SupraDrive WordSync II [SCSI Host Adapter]
 	1000  2400zi+ [Modem]
-0422  Computer Systems Assosiates
+0422  Computer Systems Associates
 	1100  Magnum 40 [Accelerator and SCSI Host Adapter]
 	1500  12 Gauge [SCSI Host Adapter]
 0439  Marc Michael Groth