diff options
author | Matt LaPlante <kernel1@cyberdogtech.com> | 2007-10-20 01:34:40 +0200 |
---|---|---|
committer | Adrian Bunk <bunk@kernel.org> | 2007-10-20 01:34:40 +0200 |
commit | 01dd2fbf0da4019c380b6ca22a074538fb31db5a (patch) | |
tree | 210291bd341c4450c8c51d8db890af0978f4035d /drivers | |
parent | 0f035b8e8491f4ff87f6eec3e3f754d36b39d7a2 (diff) | |
download | linux-01dd2fbf0da4019c380b6ca22a074538fb31db5a.tar.gz linux-01dd2fbf0da4019c380b6ca22a074538fb31db5a.tar.bz2 linux-01dd2fbf0da4019c380b6ca22a074538fb31db5a.zip |
typo fixes
Most of these fixes were already submitted for old kernel versions, and were
approved, but for some reason they never made it into the releases.
Because this is a consolidation of a couple old missed patches, it touches both
Kconfigs and documentation texts.
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/i2c/busses/Kconfig | 10 | ||||
-rw-r--r-- | drivers/input/misc/Kconfig | 4 | ||||
-rw-r--r-- | drivers/mfd/Kconfig | 4 | ||||
-rw-r--r-- | drivers/misc/Kconfig | 4 | ||||
-rw-r--r-- | drivers/mtd/maps/Kconfig | 10 | ||||
-rw-r--r-- | drivers/net/Kconfig | 2 | ||||
-rw-r--r-- | drivers/rtc/Kconfig | 2 | ||||
-rw-r--r-- | drivers/serial/Kconfig | 6 | ||||
-rw-r--r-- | drivers/usb/image/Kconfig | 2 | ||||
-rw-r--r-- | drivers/usb/serial/Kconfig | 2 | ||||
-rw-r--r-- | drivers/video/Kconfig | 6 | ||||
-rw-r--r-- | drivers/video/console/Kconfig | 2 | ||||
-rw-r--r-- | drivers/video/omap/Kconfig | 2 |
13 files changed, 28 insertions, 28 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index de95c75efb41..c466c6cfc2e5 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -278,7 +278,7 @@ config I2C_IXP2000 depends on ARCH_IXP2000 select I2C_ALGOBIT help - Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based + Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based system and are using GPIO lines for an I2C bus. This support is also available as a module. If so, the module @@ -293,8 +293,8 @@ config I2C_POWERMAC default y help This exposes the various PowerMac i2c interfaces to the linux i2c - layer and to userland. It is used by various drivers on the powemac - platform, thus should generally be enabled. + layer and to userland. It is used by various drivers on the PowerMac + platform, and should generally be enabled. This support is also available as a module. If so, the module will be called i2c-powermac. @@ -438,12 +438,12 @@ config I2C_SIMTEC tristate "Simtec Generic I2C interface" select I2C_ALGOBIT help - If you say yes to this option, support will be inclyded for + If you say yes to this option, support will be included for the Simtec Generic I2C interface. This driver is for the simple I2C bus used on newer Simtec products for general I2C, such as DDC on the Simtec BBD2016A. - This driver can also be build as a module. If so, the module + This driver can also be built as a module. If so, the module will be called i2c-simtec. config SCx200_I2C diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 7acc6351bb44..8f5c7b90187d 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -70,9 +70,9 @@ config INPUT_WISTRON_BTNS select LEDS_CLASS select CHECK_SIGNATURE help - Say Y here for support of Winstron laptop button interface, used on + Say Y here for support of Wistron laptop button interfaces, used on laptops of various brands, including Acer and Fujitsu-Siemens. If - available, mail and wifi leds will be controlable via /sys/class/leds. + available, mail and wifi LEDs will be controllable via /sys/class/leds. To compile this driver as a module, choose M here: the module will be called wistron_btns. diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index a20a51efe118..25716193a534 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -10,8 +10,8 @@ config MFD_SM501 ---help--- This is the core driver for the Silicon Motion SM501 multimedia companion chip. This device is a multifunction device which may - provide numerous interfaces including USB host controller USB gadget, - Asyncronous Serial ports, Audio functions and a dual display video + provide numerous interfaces including USB host controller, USB gadget, + asynchronous serial ports, audio functions, and a dual display video interface. The device may be connected by PCI or local bus with varying functions enabled. diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index cf02ddc3436f..b5e67c0ff433 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -180,7 +180,7 @@ config THINKPAD_ACPI For more information about this driver see <file:Documentation/thinkpad-acpi.txt> and <http://ibm-acpi.sf.net/> . - This driver was formely known as ibm-acpi. + This driver was formerly known as ibm-acpi. If you have an IBM or Lenovo ThinkPad laptop, say Y or M here. @@ -214,7 +214,7 @@ config THINKPAD_ACPI_BAY default y ---help--- Allows the thinkpad_acpi driver to handle removable bays. It will - eletrically disable the device in the bay, and also generate + electrically disable the device in the bay, and also generate notifications when the bay lever is ejected or inserted. If you are not sure, say Y here. diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 2a2a125b0c76..a592fc04cf78 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -54,7 +54,7 @@ config MTD_PHYSMAP_BANKWIDTH help This is the total width of the data bus of the flash devices in octets. For example, if you have a data bus width of 32 - bits, you would set the bus width octect value to 4. This is + bits, you would set the bus width octet value to 4. This is used internally by the CFI drivers. Ignore this option if you use run-time physmap configuration (i.e., run-time calling physmap_configure()). @@ -73,12 +73,12 @@ config MTD_PMC_MSP_EVM depends on PMC_MSP && MTD_CFI select MTD_PARTITIONS help - This provides a 'mapping' driver which support the way - in which user-programmable flash chips are connected on the - PMC-Sierra MSP eval/demo boards + This provides a 'mapping' driver which supports the way + in which user-programmable flash chips are connected on the + PMC-Sierra MSP eval/demo boards. choice - prompt "Maximum mappable memory avialable for flash IO" + prompt "Maximum mappable memory available for flash IO" depends on MTD_PMC_MSP_EVM default MSP_FLASH_MAP_LIMIT_32M diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 83d52c8acab0..fd9e8405fd77 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -855,7 +855,7 @@ config BFIN_MAC_USE_L1 depends on BFIN_MAC && BF537 default y help - To get maximum network performace, you should use L1 memory as rx/tx buffers. + To get maximum network performance, you should use L1 memory as rx/tx buffers. Say N here if you want to reserve L1 memory for other uses. config BFIN_TX_DESC_NUM diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 6420a90a4a92..cbde770eb121 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -240,7 +240,7 @@ config RTC_DRV_TWL92330 depends on MENELAUS help If you say yes here you get support for the RTC on the - TWL92330 "Menelaus" power mangement chip, used with OMAP2 + TWL92330 "Menelaus" power management chip, used with OMAP2 platforms. The support is integrated with the rest of the Menelaus driver; it's not separate module. diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index d6ae38e55d01..87665d7df6f2 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -62,11 +62,11 @@ config SERIAL_8250_CONSOLE kernel will automatically use the first serial line, /dev/ttyS0, as system console. - you can set that using a kernel command line option such as + You can set that using a kernel command line option such as "console=uart8250,io,0x3f8,9600n8" "console=uart8250,mmio,0xff5e0000,115200n8". - and it will switch to normal serial console when correponding port is - ready. + and it will switch to normal serial console when the corresponding + port is ready. "earlycon=uart8250,io,0x3f8,9600n8" "earlycon=uart8250,mmio,0xff5e0000,115200n8". it will not only setup early console. diff --git a/drivers/usb/image/Kconfig b/drivers/usb/image/Kconfig index 95ce703110d2..7595dfb38e3b 100644 --- a/drivers/usb/image/Kconfig +++ b/drivers/usb/image/Kconfig @@ -1,5 +1,5 @@ # -# USB Imageing devices configuration +# USB Imaging devices configuration # comment "USB Imaging devices" depends on USB diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 99fefed77919..4a86696e6c7d 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -527,7 +527,7 @@ config USB_SERIAL_CYBERJACK depends on USB_SERIAL && EXPERIMENTAL ---help--- Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard - reader. This is an interface to ISO 7816 compatible contactbased + reader. This is an interface to ISO 7816 compatible contact-based chipcards, e.g. GSM SIMs. To compile this driver as a module, choose M here: the diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index b3bf4ecc983a..fb9d8d0b2c04 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -661,7 +661,7 @@ config FB_HECUBA help This enables support for the Hecuba board. This driver was tested with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO - interface (8 bit data, 4 bit control). If you anticpate using + interface (8 bit data, 4 bit control). If you anticipate using this driver, say Y or M; otherwise say N. You must specify the GPIO IO address to be used for setting control and data. @@ -815,7 +815,7 @@ config FB_XVR500 help This is the framebuffer device for the Sun XVR-500 and similar graphics cards based upon the 3DLABS Wildcat chipset. The driver - only works on sparc64 systems where the system firwmare has + only works on sparc64 systems where the system firmware has mostly initialized the card already. It is treated as a completely dumb framebuffer device. @@ -828,7 +828,7 @@ config FB_XVR2500 help This is the framebuffer device for the Sun XVR-2500 and similar graphics cards based upon the 3DLABS Wildcat chipset. The driver - only works on sparc64 systems where the system firwmare has + only works on sparc64 systems where the system firmware has mostly initialized the card already. It is treated as a completely dumb framebuffer device. diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index a22ccf9485a4..267422f66255 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -27,7 +27,7 @@ config VGACON_SOFT_SCROLLBACK The scrollback buffer of the standard VGA console is located in the VGA RAM. The size of this RAM is fixed and is quite small. If you require a larger scrollback buffer, this can be placed in - System RAM which is dynamically allocated during intialization. + System RAM which is dynamically allocated during initialization. Placing the scrollback buffer in System RAM will slightly slow down the console. diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig index 7f4d25b8a184..f4fcf11b290d 100644 --- a/drivers/video/omap/Kconfig +++ b/drivers/video/omap/Kconfig @@ -8,7 +8,7 @@ config FB_OMAP Frame buffer driver for OMAP based boards. config FB_OMAP_BOOTLOADER_INIT - bool "Check bootloader initializaion" + bool "Check bootloader initialization" depends on FB_OMAP help Say Y here if you want to enable checking if the bootloader has |