diff options
author | Hans de Goede <hdegoede@redhat.com> | 2015-03-21 20:40:45 -0700 |
---|---|---|
committer | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2015-03-24 11:27:52 -0700 |
commit | a93ad65d375f216025902a73ff25900d82a9de25 (patch) | |
tree | 5eabb55b0afc59c464fbbbe961f17c9f7c94a51e /drivers | |
parent | d16a33bb94f88a40a99418993849c1eb93d60de3 (diff) | |
download | linux-a93ad65d375f216025902a73ff25900d82a9de25.tar.gz linux-a93ad65d375f216025902a73ff25900d82a9de25.tar.bz2 linux-a93ad65d375f216025902a73ff25900d82a9de25.zip |
Input: add support for ChipOne icn8318 based touchscreens
The ChipOne icn8318 is an i2c capacitive touchscreen controller typically
used in cheap android tablets, this commit adds a driver for it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/input/touchscreen/Kconfig | 13 | ||||
-rw-r--r-- | drivers/input/touchscreen/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/touchscreen/chipone_icn8318.c | 316 |
3 files changed, 330 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index a1cfe16e9a81..547f67d65372 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -140,6 +140,19 @@ config TOUCHSCREEN_BU21013 To compile this driver as a module, choose M here: the module will be called bu21013_ts. +config TOUCHSCREEN_CHIPONE_ICN8318 + tristate "chipone icn8318 touchscreen controller" + depends on GPIOLIB + depends on I2C + depends on OF + help + Say Y here if you have a ChipOne icn8318 based I2C touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called chipone_icn8318. + config TOUCHSCREEN_CY8CTMG110 tristate "cy8ctmg110 touchscreen" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 09c33531ab8e..44deea743d02 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C) += ar1021_i2c.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o +obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318) += chipone_icn8318.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o cyttsp_i2c_common.o diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c new file mode 100644 index 000000000000..32e9db0e04bf --- /dev/null +++ b/drivers/input/touchscreen/chipone_icn8318.c @@ -0,0 +1,316 @@ +/* + * Driver for ChipOne icn8318 i2c touchscreen controller + * + * Copyright (c) 2015 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Red Hat authors: + * Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/module.h> +#include <linux/of.h> + +#define ICN8318_REG_POWER 4 +#define ICN8318_REG_TOUCHDATA 16 + +#define ICN8318_POWER_ACTIVE 0 +#define ICN8318_POWER_MONITOR 1 +#define ICN8318_POWER_HIBERNATE 2 + +#define ICN8318_MAX_TOUCHES 5 + +struct icn8318_touch { + __u8 slot; + __be16 x; + __be16 y; + __u8 pressure; /* Seems more like finger width then pressure really */ + __u8 event; +/* The difference between 2 and 3 is unclear */ +#define ICN8318_EVENT_NO_DATA 1 /* No finger seen yet since wakeup */ +#define ICN8318_EVENT_UPDATE1 2 /* New or updated coordinates */ +#define ICN8318_EVENT_UPDATE2 3 /* New or updated coordinates */ +#define ICN8318_EVENT_END 4 /* Finger lifted */ +} __packed; + +struct icn8318_touch_data { + __u8 softbutton; + __u8 touch_count; + struct icn8318_touch touches[ICN8318_MAX_TOUCHES]; +} __packed; + +struct icn8318_data { + struct i2c_client *client; + struct input_dev *input; + struct gpio_desc *wake_gpio; + u32 max_x; + u32 max_y; + bool invert_x; + bool invert_y; + bool swap_x_y; +}; + +static int icn8318_read_touch_data(struct i2c_client *client, + struct icn8318_touch_data *touch_data) +{ + u8 reg = ICN8318_REG_TOUCHDATA; + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .len = 1, + .buf = ® + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = sizeof(struct icn8318_touch_data), + .buf = (u8 *)touch_data + } + }; + + return i2c_transfer(client->adapter, msg, 2); +} + +static inline bool icn8318_touch_active(u8 event) +{ + return (event == ICN8318_EVENT_UPDATE1) || + (event == ICN8318_EVENT_UPDATE2); +} + +static irqreturn_t icn8318_irq(int irq, void *dev_id) +{ + struct icn8318_data *data = dev_id; + struct device *dev = &data->client->dev; + struct icn8318_touch_data touch_data; + int i, ret, x, y; + + ret = icn8318_read_touch_data(data->client, &touch_data); + if (ret < 0) { + dev_err(dev, "Error reading touch data: %d\n", ret); + return IRQ_HANDLED; + } + + if (touch_data.softbutton) { + /* + * Other data is invalid when a softbutton is pressed. + * This needs some extra devicetree bindings to map the icn8318 + * softbutton codes to evdev codes. Currently no known devices + * use this. + */ + return IRQ_HANDLED; + } + + if (touch_data.touch_count > ICN8318_MAX_TOUCHES) { + dev_warn(dev, "Too much touches %d > %d\n", + touch_data.touch_count, ICN8318_MAX_TOUCHES); + touch_data.touch_count = ICN8318_MAX_TOUCHES; + } + + for (i = 0; i < touch_data.touch_count; i++) { + struct icn8318_touch *touch = &touch_data.touches[i]; + bool act = icn8318_touch_active(touch->event); + + input_mt_slot(data->input, touch->slot); + input_mt_report_slot_state(data->input, MT_TOOL_FINGER, act); + if (!act) + continue; + + x = be16_to_cpu(touch->x); + y = be16_to_cpu(touch->y); + + if (data->invert_x) + x = data->max_x - x; + + if (data->invert_y) + y = data->max_y - y; + + if (!data->swap_x_y) { + input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x); + input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y); + } else { + input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y); + input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x); + } + } + + input_mt_sync_frame(data->input); + input_sync(data->input); + + return IRQ_HANDLED; +} + +static int icn8318_start(struct input_dev *dev) +{ + struct icn8318_data *data = input_get_drvdata(dev); + + enable_irq(data->client->irq); + gpiod_set_value_cansleep(data->wake_gpio, 1); + + return 0; +} + +static void icn8318_stop(struct input_dev *dev) +{ + struct icn8318_data *data = input_get_drvdata(dev); + + disable_irq(data->client->irq); + i2c_smbus_write_byte_data(data->client, ICN8318_REG_POWER, + ICN8318_POWER_HIBERNATE); + gpiod_set_value_cansleep(data->wake_gpio, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int icn8318_suspend(struct device *dev) +{ + struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev)); + + mutex_lock(&data->input->mutex); + if (data->input->users) + icn8318_stop(data->input); + mutex_unlock(&data->input->mutex); + + return 0; +} + +static int icn8318_resume(struct device *dev) +{ + struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev)); + + mutex_lock(&data->input->mutex); + if (data->input->users) + icn8318_start(data->input); + mutex_unlock(&data->input->mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(icn8318_pm_ops, icn8318_suspend, icn8318_resume); + +static int icn8318_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device_node *np = dev->of_node; + struct icn8318_data *data; + struct input_dev *input; + u32 fuzz_x = 0, fuzz_y = 0; + int error; + + if (!client->irq) { + dev_err(dev, "Error no irq specified\n"); + return -EINVAL; + } + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->wake_gpio = devm_gpiod_get(dev, "wake", GPIOD_OUT_LOW); + if (IS_ERR(data->wake_gpio)) { + error = PTR_ERR(data->wake_gpio); + if (error != -EPROBE_DEFER) + dev_err(dev, "Error getting wake gpio: %d\n", error); + return error; + } + + if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) || + of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) { + dev_err(dev, "Error touchscreen-size-x and/or -y missing\n"); + return -EINVAL; + } + + /* Optional */ + of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x); + of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y); + data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x"); + data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y"); + data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y"); + + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + + input->name = client->name; + input->id.bustype = BUS_I2C; + input->open = icn8318_start; + input->close = icn8318_stop; + input->dev.parent = dev; + + if (!data->swap_x_y) { + input_set_abs_params(input, ABS_MT_POSITION_X, 0, + data->max_x, fuzz_x, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, + data->max_y, fuzz_y, 0); + } else { + input_set_abs_params(input, ABS_MT_POSITION_X, 0, + data->max_y, fuzz_y, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, + data->max_x, fuzz_x, 0); + } + + error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) + return error; + + data->client = client; + data->input = input; + input_set_drvdata(input, data); + + error = devm_request_threaded_irq(dev, client->irq, NULL, icn8318_irq, + IRQF_ONESHOT, client->name, data); + if (error) { + dev_err(dev, "Error requesting irq: %d\n", error); + return error; + } + + /* Stop device till opened */ + icn8318_stop(data->input); + + error = input_register_device(input); + if (error) + return error; + + i2c_set_clientdata(client, data); + + return 0; +} + +static const struct of_device_id icn8318_of_match[] = { + { .compatible = "chipone,icn8318" }, + { } +}; +MODULE_DEVICE_TABLE(of, icn8318_of_match); + +/* This is useless for OF-enabled devices, but it is needed by I2C subsystem */ +static const struct i2c_device_id icn8318_i2c_id[] = { + { }, +}; +MODULE_DEVICE_TABLE(i2c, icn8318_i2c_id); + +static struct i2c_driver icn8318_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "chipone_icn8318", + .pm = &icn8318_pm_ops, + .of_match_table = icn8318_of_match, + }, + .probe = icn8318_probe, + .id_table = icn8318_i2c_id, +}; + +module_i2c_driver(icn8318_driver); + +MODULE_DESCRIPTION("ChipOne icn8318 I2C Touchscreen Driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL"); |