Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.  In this case it's involved:

   - Some Davinci driver updates that has required corresponding
     platform code changes (gpio mostly)
   - CCI bindings and a few driver updates
   - Marvell mvebu patches for PCI MSI support (could have gone through
     the PCI tree for this release, but they were acked by Bjorn for
     3.12 so we kept them through arm-soc).
   - Marvell dove switch-over to DT-based PCIe configuration
   - Misc updates for Samsung platform dmaengine drivers"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442
  dmaengine: s3c24xx-dma: add support for the s3c2410 type of controller
  ARM: S3C24XX: Fix possible dma selection warning
  PCI: mvebu: make local functions static
  PCI: mvebu: add I/O access wrappers
  PCI: mvebu: Dynamically detect if the PEX link is up to enable hot plug
  ARM: mvebu: fix gated clock documentation
  ARM: dove: remove legacy pcie and clock init
  ARM: dove: switch to DT probed mbus address windows
  ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device
  ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443
  dmaengine: add driver for Samsung s3c24xx SoCs
  ARM: S3C24XX: number the dma clocks
  PCI: mvebu: add support for Marvell Dove SoCs
  PCI: mvebu: add support for reset on GPIO
  PCI: mvebu: remove subsys_initcall
  PCI: mvebu: increment nports only for registered ports
  PCI: mvebu: move clock enable before register access
  PCI: mvebu: add support for MSI
  irqchip: armada-370-xp: implement MSI support
  ...

9 files changed, 2414 insertions, 138 deletions

diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index 200926699778..bb5b90e8e768 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -18,11 +18,21 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 
 #include <asm/cacheflush.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
 #include <asm/smp_plat.h>
 
+#define DRIVER_NAME		"CCI-400"
+#define DRIVER_NAME_PMU		DRIVER_NAME " PMU"
+#define PMU_NAME		"CCI_400"
+
 #define CCI_PORT_CTRL		0x0
 #define CCI_CTRL_STATUS		0xc
 
@@ -54,6 +64,568 @@ static unsigned int nb_cci_ports;
 static void __iomem *cci_ctrl_base;
 static unsigned long cci_ctrl_phys;
 
+#ifdef CONFIG_HW_PERF_EVENTS
+
+#define CCI_PMCR		0x0100
+#define CCI_PID2		0x0fe8
+
+#define CCI_PMCR_CEN		0x00000001
+#define CCI_PMCR_NCNT_MASK	0x0000f800
+#define CCI_PMCR_NCNT_SHIFT	11
+
+#define CCI_PID2_REV_MASK	0xf0
+#define CCI_PID2_REV_SHIFT	4
+
+/* Port ids */
+#define CCI_PORT_S0	0
+#define CCI_PORT_S1	1
+#define CCI_PORT_S2	2
+#define CCI_PORT_S3	3
+#define CCI_PORT_S4	4
+#define CCI_PORT_M0	5
+#define CCI_PORT_M1	6
+#define CCI_PORT_M2	7
+
+#define CCI_REV_R0		0
+#define CCI_REV_R1		1
+#define CCI_REV_R0_P4		4
+#define CCI_REV_R1_P2		6
+
+#define CCI_PMU_EVT_SEL		0x000
+#define CCI_PMU_CNTR		0x004
+#define CCI_PMU_CNTR_CTRL	0x008
+#define CCI_PMU_OVRFLW		0x00c
+
+#define CCI_PMU_OVRFLW_FLAG	1
+
+#define CCI_PMU_CNTR_BASE(idx)	((idx) * SZ_4K)
+
+/*
+ * Instead of an event id to monitor CCI cycles, a dedicated counter is
+ * provided. Use 0xff to represent CCI cycles and hope that no future revisions
+ * make use of this event in hardware.
+ */
+enum cci400_perf_events {
+	CCI_PMU_CYCLES = 0xff
+};
+
+#define CCI_PMU_EVENT_MASK		0xff
+#define CCI_PMU_EVENT_SOURCE(event)	((event >> 5) & 0x7)
+#define CCI_PMU_EVENT_CODE(event)	(event & 0x1f)
+
+#define CCI_PMU_MAX_HW_EVENTS 5   /* CCI PMU has 4 counters + 1 cycle counter */
+
+#define CCI_PMU_CYCLE_CNTR_IDX		0
+#define CCI_PMU_CNTR0_IDX		1
+#define CCI_PMU_CNTR_LAST(cci_pmu)	(CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1)
+
+/*
+ * CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8
+ * ports and bits 4:0 are event codes. There are different event codes
+ * associated with each port type.
+ *
+ * Additionally, the range of events associated with the port types changed
+ * between Rev0 and Rev1.
+ *
+ * The constants below define the range of valid codes for each port type for
+ * the different revisions and are used to validate the event to be monitored.
+ */
+
+#define CCI_REV_R0_SLAVE_PORT_MIN_EV	0x00
+#define CCI_REV_R0_SLAVE_PORT_MAX_EV	0x13
+#define CCI_REV_R0_MASTER_PORT_MIN_EV	0x14
+#define CCI_REV_R0_MASTER_PORT_MAX_EV	0x1a
+
+#define CCI_REV_R1_SLAVE_PORT_MIN_EV	0x00
+#define CCI_REV_R1_SLAVE_PORT_MAX_EV	0x14
+#define CCI_REV_R1_MASTER_PORT_MIN_EV	0x00
+#define CCI_REV_R1_MASTER_PORT_MAX_EV	0x11
+
+struct pmu_port_event_ranges {
+	u8 slave_min;
+	u8 slave_max;
+	u8 master_min;
+	u8 master_max;
+};
+
+static struct pmu_port_event_ranges port_event_range[] = {
+	[CCI_REV_R0] = {
+		.slave_min = CCI_REV_R0_SLAVE_PORT_MIN_EV,
+		.slave_max = CCI_REV_R0_SLAVE_PORT_MAX_EV,
+		.master_min = CCI_REV_R0_MASTER_PORT_MIN_EV,
+		.master_max = CCI_REV_R0_MASTER_PORT_MAX_EV,
+	},
+	[CCI_REV_R1] = {
+		.slave_min = CCI_REV_R1_SLAVE_PORT_MIN_EV,
+		.slave_max = CCI_REV_R1_SLAVE_PORT_MAX_EV,
+		.master_min = CCI_REV_R1_MASTER_PORT_MIN_EV,
+		.master_max = CCI_REV_R1_MASTER_PORT_MAX_EV,
+	},
+};
+
+struct cci_pmu_drv_data {
+	void __iomem *base;
+	struct arm_pmu *cci_pmu;
+	int nr_irqs;
+	int irqs[CCI_PMU_MAX_HW_EVENTS];
+	unsigned long active_irqs;
+	struct perf_event *events[CCI_PMU_MAX_HW_EVENTS];
+	unsigned long used_mask[BITS_TO_LONGS(CCI_PMU_MAX_HW_EVENTS)];
+	struct pmu_port_event_ranges *port_ranges;
+	struct pmu_hw_events hw_events;
+};
+static struct cci_pmu_drv_data *pmu;
+
+static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs)
+{
+	int i;
+
+	for (i = 0; i < nr_irqs; i++)
+		if (irq == irqs[i])
+			return true;
+
+	return false;
+}
+
+static int probe_cci_revision(void)
+{
+	int rev;
+	rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK;
+	rev >>= CCI_PID2_REV_SHIFT;
+
+	if (rev <= CCI_REV_R0_P4)
+		return CCI_REV_R0;
+	else if (rev <= CCI_REV_R1_P2)
+		return CCI_REV_R1;
+
+	return -ENOENT;
+}
+
+static struct pmu_port_event_ranges *port_range_by_rev(void)
+{
+	int rev = probe_cci_revision();
+
+	if (rev < 0)
+		return NULL;
+
+	return &port_event_range[rev];
+}
+
+static int pmu_is_valid_slave_event(u8 ev_code)
+{
+	return pmu->port_ranges->slave_min <= ev_code &&
+		ev_code <= pmu->port_ranges->slave_max;
+}
+
+static int pmu_is_valid_master_event(u8 ev_code)
+{
+	return pmu->port_ranges->master_min <= ev_code &&
+		ev_code <= pmu->port_ranges->master_max;
+}
+
+static int pmu_validate_hw_event(u8 hw_event)
+{
+	u8 ev_source = CCI_PMU_EVENT_SOURCE(hw_event);
+	u8 ev_code = CCI_PMU_EVENT_CODE(hw_event);
+
+	switch (ev_source) {
+	case CCI_PORT_S0:
+	case CCI_PORT_S1:
+	case CCI_PORT_S2:
+	case CCI_PORT_S3:
+	case CCI_PORT_S4:
+		/* Slave Interface */
+		if (pmu_is_valid_slave_event(ev_code))
+			return hw_event;
+		break;
+	case CCI_PORT_M0:
+	case CCI_PORT_M1:
+	case CCI_PORT_M2:
+		/* Master Interface */
+		if (pmu_is_valid_master_event(ev_code))
+			return hw_event;
+		break;
+	}
+
+	return -ENOENT;
+}
+
+static int pmu_is_valid_counter(struct arm_pmu *cci_pmu, int idx)
+{
+	return CCI_PMU_CYCLE_CNTR_IDX <= idx &&
+		idx <= CCI_PMU_CNTR_LAST(cci_pmu);
+}
+
+static u32 pmu_read_register(int idx, unsigned int offset)
+{
+	return readl_relaxed(pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
+}
+
+static void pmu_write_register(u32 value, int idx, unsigned int offset)
+{
+	return writel_relaxed(value, pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
+}
+
+static void pmu_disable_counter(int idx)
+{
+	pmu_write_register(0, idx, CCI_PMU_CNTR_CTRL);
+}
+
+static void pmu_enable_counter(int idx)
+{
+	pmu_write_register(1, idx, CCI_PMU_CNTR_CTRL);
+}
+
+static void pmu_set_event(int idx, unsigned long event)
+{
+	event &= CCI_PMU_EVENT_MASK;
+	pmu_write_register(event, idx, CCI_PMU_EVT_SEL);
+}
+
+static u32 pmu_get_max_counters(void)
+{
+	u32 n_cnts = (readl_relaxed(cci_ctrl_base + CCI_PMCR) &
+		      CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
+
+	/* add 1 for cycle counter */
+	return n_cnts + 1;
+}
+
+static struct pmu_hw_events *pmu_get_hw_events(void)
+{
+	return &pmu->hw_events;
+}
+
+static int pmu_get_event_idx(struct pmu_hw_events *hw, struct perf_event *event)
+{
+	struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event *hw_event = &event->hw;
+	unsigned long cci_event = hw_event->config_base & CCI_PMU_EVENT_MASK;
+	int idx;
+
+	if (cci_event == CCI_PMU_CYCLES) {
+		if (test_and_set_bit(CCI_PMU_CYCLE_CNTR_IDX, hw->used_mask))
+			return -EAGAIN;
+
+		return CCI_PMU_CYCLE_CNTR_IDX;
+	}
+
+	for (idx = CCI_PMU_CNTR0_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); ++idx)
+		if (!test_and_set_bit(idx, hw->used_mask))
+			return idx;
+
+	/* No counters available */
+	return -EAGAIN;
+}
+
+static int pmu_map_event(struct perf_event *event)
+{
+	int mapping;
+	u8 config = event->attr.config & CCI_PMU_EVENT_MASK;
+
+	if (event->attr.type < PERF_TYPE_MAX)
+		return -ENOENT;
+
+	if (config == CCI_PMU_CYCLES)
+		mapping = config;
+	else
+		mapping = pmu_validate_hw_event(config);
+
+	return mapping;
+}
+
+static int pmu_request_irq(struct arm_pmu *cci_pmu, irq_handler_t handler)
+{
+	int i;
+	struct platform_device *pmu_device = cci_pmu->plat_device;
+
+	if (unlikely(!pmu_device))
+		return -ENODEV;
+
+	if (pmu->nr_irqs < 1) {
+		dev_err(&pmu_device->dev, "no irqs for CCI PMUs defined\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Register all available CCI PMU interrupts. In the interrupt handler
+	 * we iterate over the counters checking for interrupt source (the
+	 * overflowing counter) and clear it.
+	 *
+	 * This should allow handling of non-unique interrupt for the counters.
+	 */
+	for (i = 0; i < pmu->nr_irqs; i++) {
+		int err = request_irq(pmu->irqs[i], handler, IRQF_SHARED,
+				"arm-cci-pmu", cci_pmu);
+		if (err) {
+			dev_err(&pmu_device->dev, "unable to request IRQ%d for ARM CCI PMU counters\n",
+				pmu->irqs[i]);
+			return err;
+		}
+
+		set_bit(i, &pmu->active_irqs);
+	}
+
+	return 0;
+}
+
+static irqreturn_t pmu_handle_irq(int irq_num, void *dev)
+{
+	unsigned long flags;
+	struct arm_pmu *cci_pmu = (struct arm_pmu *)dev;
+	struct pmu_hw_events *events = cci_pmu->get_hw_events();
+	struct perf_sample_data data;
+	struct pt_regs *regs;
+	int idx, handled = IRQ_NONE;
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+	regs = get_irq_regs();
+	/*
+	 * Iterate over counters and update the corresponding perf events.
+	 * This should work regardless of whether we have per-counter overflow
+	 * interrupt or a combined overflow interrupt.
+	 */
+	for (idx = CCI_PMU_CYCLE_CNTR_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++) {
+		struct perf_event *event = events->events[idx];
+		struct hw_perf_event *hw_counter;
+
+		if (!event)
+			continue;
+
+		hw_counter = &event->hw;
+
+		/* Did this counter overflow? */
+		if (!pmu_read_register(idx, CCI_PMU_OVRFLW) & CCI_PMU_OVRFLW_FLAG)
+			continue;
+
+		pmu_write_register(CCI_PMU_OVRFLW_FLAG, idx, CCI_PMU_OVRFLW);
+
+		handled = IRQ_HANDLED;
+
+		armpmu_event_update(event);
+		perf_sample_data_init(&data, 0, hw_counter->last_period);
+		if (!armpmu_event_set_period(event))
+			continue;
+
+		if (perf_event_overflow(event, &data, regs))
+			cci_pmu->disable(event);
+	}
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+
+	return IRQ_RETVAL(handled);
+}
+
+static void pmu_free_irq(struct arm_pmu *cci_pmu)
+{
+	int i;
+
+	for (i = 0; i < pmu->nr_irqs; i++) {
+		if (!test_and_clear_bit(i, &pmu->active_irqs))
+			continue;
+
+		free_irq(pmu->irqs[i], cci_pmu);
+	}
+}
+
+static void pmu_enable_event(struct perf_event *event)
+{
+	unsigned long flags;
+	struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+	struct pmu_hw_events *events = cci_pmu->get_hw_events();
+	struct hw_perf_event *hw_counter = &event->hw;
+	int idx = hw_counter->idx;
+
+	if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
+		dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+	/* Configure the event to count, unless you are counting cycles */
+	if (idx != CCI_PMU_CYCLE_CNTR_IDX)
+		pmu_set_event(idx, hw_counter->config_base);
+
+	pmu_enable_counter(idx);
+
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void pmu_disable_event(struct perf_event *event)
+{
+	struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event *hw_counter = &event->hw;
+	int idx = hw_counter->idx;
+
+	if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
+		dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+		return;
+	}
+
+	pmu_disable_counter(idx);
+}
+
+static void pmu_start(struct arm_pmu *cci_pmu)
+{
+	u32 val;
+	unsigned long flags;
+	struct pmu_hw_events *events = cci_pmu->get_hw_events();
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+	/* Enable all the PMU counters. */
+	val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
+	writel(val, cci_ctrl_base + CCI_PMCR);
+
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void pmu_stop(struct arm_pmu *cci_pmu)
+{
+	u32 val;
+	unsigned long flags;
+	struct pmu_hw_events *events = cci_pmu->get_hw_events();
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+	/* Disable all the PMU counters. */
+	val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
+	writel(val, cci_ctrl_base + CCI_PMCR);
+
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static u32 pmu_read_counter(struct perf_event *event)
+{
+	struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event *hw_counter = &event->hw;
+	int idx = hw_counter->idx;
+	u32 value;
+
+	if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
+		dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+		return 0;
+	}
+	value = pmu_read_register(idx, CCI_PMU_CNTR);
+
+	return value;
+}
+
+static void pmu_write_counter(struct perf_event *event, u32 value)
+{
+	struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+	struct hw_perf_event *hw_counter = &event->hw;
+	int idx = hw_counter->idx;
+
+	if (unlikely(!pmu_is_valid_counter(cci_pmu, idx)))
+		dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+	else
+		pmu_write_register(value, idx, CCI_PMU_CNTR);
+}
+
+static int cci_pmu_init(struct arm_pmu *cci_pmu, struct platform_device *pdev)
+{
+	*cci_pmu = (struct arm_pmu){
+		.name             = PMU_NAME,
+		.max_period       = (1LLU << 32) - 1,
+		.get_hw_events    = pmu_get_hw_events,
+		.get_event_idx    = pmu_get_event_idx,
+		.map_event        = pmu_map_event,
+		.request_irq      = pmu_request_irq,
+		.handle_irq       = pmu_handle_irq,
+		.free_irq         = pmu_free_irq,
+		.enable           = pmu_enable_event,
+		.disable          = pmu_disable_event,
+		.start            = pmu_start,
+		.stop             = pmu_stop,
+		.read_counter     = pmu_read_counter,
+		.write_counter    = pmu_write_counter,
+	};
+
+	cci_pmu->plat_device = pdev;
+	cci_pmu->num_events = pmu_get_max_counters();
+
+	return armpmu_register(cci_pmu, -1);
+}
+
+static const struct of_device_id arm_cci_pmu_matches[] = {
+	{
+		.compatible = "arm,cci-400-pmu",
+	},
+	{},
+};
+
+static int cci_pmu_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int i, ret, irq;
+
+	pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
+	if (!pmu)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pmu->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pmu->base))
+		return -ENOMEM;
+
+	/*
+	 * CCI PMU has 5 overflow signals - one per counter; but some may be tied
+	 * together to a common interrupt.
+	 */
+	pmu->nr_irqs = 0;
+	for (i = 0; i < CCI_PMU_MAX_HW_EVENTS; i++) {
+		irq = platform_get_irq(pdev, i);
+		if (irq < 0)
+			break;
+
+		if (is_duplicate_irq(irq, pmu->irqs, pmu->nr_irqs))
+			continue;
+
+		pmu->irqs[pmu->nr_irqs++] = irq;
+	}
+
+	/*
+	 * Ensure that the device tree has as many interrupts as the number
+	 * of counters.
+	 */
+	if (i < CCI_PMU_MAX_HW_EVENTS) {
+		dev_warn(&pdev->dev, "In-correct number of interrupts: %d, should be %d\n",
+			i, CCI_PMU_MAX_HW_EVENTS);
+		return -EINVAL;
+	}
+
+	pmu->port_ranges = port_range_by_rev();
+	if (!pmu->port_ranges) {
+		dev_warn(&pdev->dev, "CCI PMU version not supported\n");
+		return -EINVAL;
+	}
+
+	pmu->cci_pmu = devm_kzalloc(&pdev->dev, sizeof(*(pmu->cci_pmu)), GFP_KERNEL);
+	if (!pmu->cci_pmu)
+		return -ENOMEM;
+
+	pmu->hw_events.events = pmu->events;
+	pmu->hw_events.used_mask = pmu->used_mask;
+	raw_spin_lock_init(&pmu->hw_events.pmu_lock);
+
+	ret = cci_pmu_init(pmu->cci_pmu, pdev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int cci_platform_probe(struct platform_device *pdev)
+{
+	if (!cci_probed())
+		return -ENODEV;
+
+	return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+#endif /* CONFIG_HW_PERF_EVENTS */
+
 struct cpu_port {
 	u64 mpidr;
 	u32 port;
@@ -120,7 +692,7 @@ int cci_ace_get_port(struct device_node *dn)
 }
 EXPORT_SYMBOL_GPL(cci_ace_get_port);
 
-static void __init cci_ace_init_ports(void)
+static void cci_ace_init_ports(void)
 {
 	int port, cpu;
 	struct device_node *cpun;
@@ -386,7 +958,7 @@ static const struct of_device_id arm_cci_ctrl_if_matches[] = {
 	{},
 };
 
-static int __init cci_probe(void)
+static int cci_probe(void)
 {
 	struct cci_nb_ports const *cci_config;
 	int ret, i, nb_ace = 0, nb_ace_lite = 0;
@@ -490,7 +1062,7 @@ memalloc_err:
 static int cci_init_status = -EAGAIN;
 static DEFINE_MUTEX(cci_probing);
 
-static int __init cci_init(void)
+static int cci_init(void)
 {
 	if (cci_init_status != -EAGAIN)
 		return cci_init_status;
@@ -502,18 +1074,55 @@ static int __init cci_init(void)
 	return cci_init_status;
 }
 
+#ifdef CONFIG_HW_PERF_EVENTS
+static struct platform_driver cci_pmu_driver = {
+	.driver = {
+		   .name = DRIVER_NAME_PMU,
+		   .of_match_table = arm_cci_pmu_matches,
+		  },
+	.probe = cci_pmu_probe,
+};
+
+static struct platform_driver cci_platform_driver = {
+	.driver = {
+		   .name = DRIVER_NAME,
+		   .of_match_table = arm_cci_matches,
+		  },
+	.probe = cci_platform_probe,
+};
+
+static int __init cci_platform_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&cci_pmu_driver);
+	if (ret)
+		return ret;
+
+	return platform_driver_register(&cci_platform_driver);
+}
+
+#else
+
+static int __init cci_platform_init(void)
+{
+	return 0;
+}
+
+#endif
 /*
  * To sort out early init calls ordering a helper function is provided to
  * check if the CCI driver has beed initialized. Function check if the driver
  * has been initialized, if not it calls the init function that probes
  * the driver and updates the return value.
  */
-bool __init cci_probed(void)
+bool cci_probed(void)
 {
 	return cci_init() == 0;
 }
 EXPORT_SYMBOL_GPL(cci_probed);
 
 early_initcall(cci_init);
+core_initcall(cci_platform_init);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("ARM CCI support");
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 56fe803adcb1..c61a6eccf169 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -154,6 +154,18 @@ config TEGRA20_APB_DMA
 	  This DMA controller transfers data from memory to peripheral fifo
 	  or vice versa. It does not support memory to memory data transfer.
 
+config S3C24XX_DMAC
+	tristate "Samsung S3C24XX DMA support"
+	depends on ARCH_S3C24XX && !S3C24XX_DMA
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Support for the Samsung S3C24XX DMA controller driver. The
+	  DMA controller is having multiple DMA channels which can be
+	  configured for different peripherals like audio, UART, SPI.
+	  The DMA controller can transfer data from memory to peripheral,
+	  periphal to memory, periphal to periphal and memory to memory.
+
 source "drivers/dma/sh/Kconfig"
 
 config COH901318
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index db89035b3626..0ce2da97e429 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
 obj-$(CONFIG_TI_EDMA) += edma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
 obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
+obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
 obj-$(CONFIG_PL330_DMA) += pl330.o
 obj-$(CONFIG_PCH_DMA) += pch_dma.o
 obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c
new file mode 100644
index 000000000000..4cb127978636
--- /dev/null
+++ b/drivers/dma/s3c24xx-dma.c
@@ -0,0 +1,1350 @@
+/*
+ * S3C24XX DMA handling
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on amba-pl08x.c
+ *
+ * Copyright (c) 2006 ARM Ltd.
+ * Copyright (c) 2010 ST-Ericsson SA
+ *
+ * Author: Peter Pearse <peter.pearse@arm.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * The DMA controllers in S3C24XX SoCs have a varying number of DMA signals
+ * that can be routed to any of the 4 to 8 hardware-channels.
+ *
+ * Therefore on these DMA controllers the number of channels
+ * and the number of incoming DMA signals are two totally different things.
+ * It is usually not possible to theoretically handle all physical signals,
+ * so a multiplexing scheme with possible denial of use is necessary.
+ *
+ * Open items:
+ * - bursts
+ */
+
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_data/dma-s3c24xx.h>
+
+#include "dmaengine.h"
+#include "virt-dma.h"
+
+#define MAX_DMA_CHANNELS	8
+
+#define S3C24XX_DISRC			0x00
+#define S3C24XX_DISRCC			0x04
+#define S3C24XX_DISRCC_INC_INCREMENT	0
+#define S3C24XX_DISRCC_INC_FIXED	BIT(0)
+#define S3C24XX_DISRCC_LOC_AHB		0
+#define S3C24XX_DISRCC_LOC_APB		BIT(1)
+
+#define S3C24XX_DIDST			0x08
+#define S3C24XX_DIDSTC			0x0c
+#define S3C24XX_DIDSTC_INC_INCREMENT	0
+#define S3C24XX_DIDSTC_INC_FIXED	BIT(0)
+#define S3C24XX_DIDSTC_LOC_AHB		0
+#define S3C24XX_DIDSTC_LOC_APB		BIT(1)
+#define S3C24XX_DIDSTC_INT_TC0		0
+#define S3C24XX_DIDSTC_INT_RELOAD	BIT(2)
+
+#define S3C24XX_DCON			0x10
+
+#define S3C24XX_DCON_TC_MASK		0xfffff
+#define S3C24XX_DCON_DSZ_BYTE		(0 << 20)
+#define S3C24XX_DCON_DSZ_HALFWORD	(1 << 20)
+#define S3C24XX_DCON_DSZ_WORD		(2 << 20)
+#define S3C24XX_DCON_DSZ_MASK		(3 << 20)
+#define S3C24XX_DCON_DSZ_SHIFT		20
+#define S3C24XX_DCON_AUTORELOAD		0
+#define S3C24XX_DCON_NORELOAD		BIT(22)
+#define S3C24XX_DCON_HWTRIG		BIT(23)
+#define S3C24XX_DCON_HWSRC_SHIFT	24
+#define S3C24XX_DCON_SERV_SINGLE	0
+#define S3C24XX_DCON_SERV_WHOLE		BIT(27)
+#define S3C24XX_DCON_TSZ_UNIT		0
+#define S3C24XX_DCON_TSZ_BURST4		BIT(28)
+#define S3C24XX_DCON_INT		BIT(29)
+#define S3C24XX_DCON_SYNC_PCLK		0
+#define S3C24XX_DCON_SYNC_HCLK		BIT(30)
+#define S3C24XX_DCON_DEMAND		0
+#define S3C24XX_DCON_HANDSHAKE		BIT(31)
+
+#define S3C24XX_DSTAT			0x14
+#define S3C24XX_DSTAT_STAT_BUSY		BIT(20)
+#define S3C24XX_DSTAT_CURRTC_MASK	0xfffff
+
+#define S3C24XX_DMASKTRIG		0x20
+#define S3C24XX_DMASKTRIG_SWTRIG	BIT(0)
+#define S3C24XX_DMASKTRIG_ON		BIT(1)
+#define S3C24XX_DMASKTRIG_STOP		BIT(2)
+
+#define S3C24XX_DMAREQSEL		0x24
+#define S3C24XX_DMAREQSEL_HW		BIT(0)
+
+/*
+ * S3C2410, S3C2440 and S3C2442 SoCs cannot select any physical channel
+ * for a DMA source. Instead only specific channels are valid.
+ * All of these SoCs have 4 physical channels and the number of request
+ * source bits is 3. Additionally we also need 1 bit to mark the channel
+ * as valid.
+ * Therefore we separate the chansel element of the channel data into 4
+ * parts of 4 bits each, to hold the information if the channel is valid
+ * and the hw request source to use.
+ *
+ * Example:
+ * SDI is valid on channels 0, 2 and 3 - with varying hw request sources.
+ * For it the chansel field would look like
+ *
+ * ((BIT(3) | 1) << 3 * 4) | // channel 3, with request source 1
+ * ((BIT(3) | 2) << 2 * 4) | // channel 2, with request source 2
+ * ((BIT(3) | 2) << 0 * 4)   // channel 0, with request source 2
+ */
+#define S3C24XX_CHANSEL_WIDTH		4
+#define S3C24XX_CHANSEL_VALID		BIT(3)
+#define S3C24XX_CHANSEL_REQ_MASK	7
+
+/*
+ * struct soc_data - vendor-specific config parameters for individual SoCs
+ * @stride: spacing between the registers of each channel
+ * @has_reqsel: does the controller use the newer requestselection mechanism
+ * @has_clocks: are controllable dma-clocks present
+ */
+struct soc_data {
+	int stride;
+	bool has_reqsel;
+	bool has_clocks;
+};
+
+/*
+ * enum s3c24xx_dma_chan_state - holds the virtual channel states
+ * @S3C24XX_DMA_CHAN_IDLE: the channel is idle
+ * @S3C24XX_DMA_CHAN_RUNNING: the channel has allocated a physical transport
+ * channel and is running a transfer on it
+ * @S3C24XX_DMA_CHAN_WAITING: the channel is waiting for a physical transport
+ * channel to become available (only pertains to memcpy channels)
+ */
+enum s3c24xx_dma_chan_state {
+	S3C24XX_DMA_CHAN_IDLE,
+	S3C24XX_DMA_CHAN_RUNNING,
+	S3C24XX_DMA_CHAN_WAITING,
+};
+
+/*
+ * struct s3c24xx_sg - structure containing data per sg
+ * @src_addr: src address of sg
+ * @dst_addr: dst address of sg
+ * @len: transfer len in bytes
+ * @node: node for txd's dsg_list
+ */
+struct s3c24xx_sg {
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	size_t len;
+	struct list_head node;
+};
+
+/*
+ * struct s3c24xx_txd - wrapper for struct dma_async_tx_descriptor
+ * @vd: virtual DMA descriptor
+ * @dsg_list: list of children sg's
+ * @at: sg currently being transfered
+ * @width: transfer width
+ * @disrcc: value for source control register
+ * @didstc: value for destination control register
+ * @dcon: base value for dcon register
+ */
+struct s3c24xx_txd {
+	struct virt_dma_desc vd;
+	struct list_head dsg_list;
+	struct list_head *at;
+	u8 width;
+	u32 disrcc;
+	u32 didstc;
+	u32 dcon;
+};
+
+struct s3c24xx_dma_chan;
+
+/*
+ * struct s3c24xx_dma_phy - holder for the physical channels
+ * @id: physical index to this channel
+ * @valid: does the channel have all required elements
+ * @base: virtual memory base (remapped) for the this channel
+ * @irq: interrupt for this channel
+ * @clk: clock for this channel
+ * @lock: a lock to use when altering an instance of this struct
+ * @serving: virtual channel currently being served by this physicalchannel
+ * @host: a pointer to the host (internal use)
+ */
+struct s3c24xx_dma_phy {
+	unsigned int			id;
+	bool				valid;
+	void __iomem			*base;
+	unsigned int			irq;
+	struct clk			*clk;
+	spinlock_t			lock;
+	struct s3c24xx_dma_chan		*serving;
+	struct s3c24xx_dma_engine	*host;
+};
+
+/*
+ * struct s3c24xx_dma_chan - this structure wraps a DMA ENGINE channel
+ * @id: the id of the channel
+ * @name: name of the channel
+ * @vc: wrappped virtual channel
+ * @phy: the physical channel utilized by this channel, if there is one
+ * @runtime_addr: address for RX/TX according to the runtime config
+ * @at: active transaction on this channel
+ * @lock: a lock for this channel data
+ * @host: a pointer to the host (internal use)
+ * @state: whether the channel is idle, running etc
+ * @slave: whether this channel is a device (slave) or for memcpy
+ */
+struct s3c24xx_dma_chan {
+	int id;
+	const char *name;
+	struct virt_dma_chan vc;
+	struct s3c24xx_dma_phy *phy;
+	struct dma_slave_config cfg;
+	struct s3c24xx_txd *at;
+	struct s3c24xx_dma_engine *host;
+	enum s3c24xx_dma_chan_state state;
+	bool slave;
+};
+
+/*
+ * struct s3c24xx_dma_engine - the local state holder for the S3C24XX
+ * @pdev: the corresponding platform device
+ * @pdata: platform data passed in from the platform/machine
+ * @base: virtual memory base (remapped)
+ * @slave: slave engine for this instance
+ * @memcpy: memcpy engine for this instance
+ * @phy_chans: array of data for the physical channels
+ */
+struct s3c24xx_dma_engine {
+	struct platform_device			*pdev;
+	const struct s3c24xx_dma_platdata	*pdata;
+	struct soc_data				*sdata;
+	void __iomem				*base;
+	struct dma_device			slave;
+	struct dma_device			memcpy;
+	struct s3c24xx_dma_phy			*phy_chans;
+};
+
+/*
+ * Physical channel handling
+ */
+
+/*
+ * Check whether a certain channel is busy or not.
+ */
+static int s3c24xx_dma_phy_busy(struct s3c24xx_dma_phy *phy)
+{
+	unsigned int val = readl(phy->base + S3C24XX_DSTAT);
+	return val & S3C24XX_DSTAT_STAT_BUSY;
+}
+
+static bool s3c24xx_dma_phy_valid(struct s3c24xx_dma_chan *s3cchan,
+				  struct s3c24xx_dma_phy *phy)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
+	int phyvalid;
+
+	/* every phy is valid for memcopy channels */
+	if (!s3cchan->slave)
+		return true;
+
+	/* On newer variants all phys can be used for all virtual channels */
+	if (s3cdma->sdata->has_reqsel)
+		return true;
+
+	phyvalid = (cdata->chansel >> (phy->id * S3C24XX_CHANSEL_WIDTH));
+	return (phyvalid & S3C24XX_CHANSEL_VALID) ? true : false;
+}
+
+/*
+ * Allocate a physical channel for a virtual channel
+ *
+ * Try to locate a physical channel to be used for this transfer. If all
+ * are taken return NULL and the requester will have to cope by using
+ * some fallback PIO mode or retrying later.
+ */
+static
+struct s3c24xx_dma_phy *s3c24xx_dma_get_phy(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_dma_channel *cdata;
+	struct s3c24xx_dma_phy *phy = NULL;
+	unsigned long flags;
+	int i;
+	int ret;
+
+	if (s3cchan->slave)
+		cdata = &pdata->channels[s3cchan->id];
+
+	for (i = 0; i < s3cdma->pdata->num_phy_channels; i++) {
+		phy = &s3cdma->phy_chans[i];
+
+		if (!phy->valid)
+			continue;
+
+		if (!s3c24xx_dma_phy_valid(s3cchan, phy))
+			continue;
+
+		spin_lock_irqsave(&phy->lock, flags);
+
+		if (!phy->serving) {
+			phy->serving = s3cchan;
+			spin_unlock_irqrestore(&phy->lock, flags);
+			break;
+		}
+
+		spin_unlock_irqrestore(&phy->lock, flags);
+	}
+
+	/* No physical channel available, cope with it */
+	if (i == s3cdma->pdata->num_phy_channels) {
+		dev_warn(&s3cdma->pdev->dev, "no phy channel available\n");
+		return NULL;
+	}
+
+	/* start the phy clock */
+	if (s3cdma->sdata->has_clocks) {
+		ret = clk_enable(phy->clk);
+		if (ret) {
+			dev_err(&s3cdma->pdev->dev, "could not enable clock for channel %d, err %d\n",
+				phy->id, ret);
+			phy->serving = NULL;
+			return NULL;
+		}
+	}
+
+	return phy;
+}
+
+/*
+ * Mark the physical channel as free.
+ *
+ * This drops the link between the physical and virtual channel.
+ */
+static inline void s3c24xx_dma_put_phy(struct s3c24xx_dma_phy *phy)
+{
+	struct s3c24xx_dma_engine *s3cdma = phy->host;
+
+	if (s3cdma->sdata->has_clocks)
+		clk_disable(phy->clk);
+
+	phy->serving = NULL;
+}
+
+/*
+ * Stops the channel by writing the stop bit.
+ * This should not be used for an on-going transfer, but as a method of
+ * shutting down a channel (eg, when it's no longer used) or terminating a
+ * transfer.
+ */
+static void s3c24xx_dma_terminate_phy(struct s3c24xx_dma_phy *phy)
+{
+	writel(S3C24XX_DMASKTRIG_STOP, phy->base + S3C24XX_DMASKTRIG);
+}
+
+/*
+ * Virtual channel handling
+ */
+
+static inline
+struct s3c24xx_dma_chan *to_s3c24xx_dma_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct s3c24xx_dma_chan, vc.chan);
+}
+
+static u32 s3c24xx_dma_getbytes_chan(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_phy *phy = s3cchan->phy;
+	struct s3c24xx_txd *txd = s3cchan->at;
+	u32 tc = readl(phy->base + S3C24XX_DSTAT) & S3C24XX_DSTAT_CURRTC_MASK;
+
+	return tc * txd->width;
+}
+
+static int s3c24xx_dma_set_runtime_config(struct s3c24xx_dma_chan *s3cchan,
+				  struct dma_slave_config *config)
+{
+	if (!s3cchan->slave)
+		return -EINVAL;
+
+	/* Reject definitely invalid configurations */
+	if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
+	    config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
+		return -EINVAL;
+
+	s3cchan->cfg = *config;
+
+	return 0;
+}
+
+/*
+ * Transfer handling
+ */
+
+static inline
+struct s3c24xx_txd *to_s3c24xx_txd(struct dma_async_tx_descriptor *tx)
+{
+	return container_of(tx, struct s3c24xx_txd, vd.tx);
+}
+
+static struct s3c24xx_txd *s3c24xx_dma_get_txd(void)
+{
+	struct s3c24xx_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
+
+	if (txd) {
+		INIT_LIST_HEAD(&txd->dsg_list);
+		txd->dcon = S3C24XX_DCON_INT | S3C24XX_DCON_NORELOAD;
+	}
+
+	return txd;
+}
+
+static void s3c24xx_dma_free_txd(struct s3c24xx_txd *txd)
+{
+	struct s3c24xx_sg *dsg, *_dsg;
+
+	list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) {
+		list_del(&dsg->node);
+		kfree(dsg);
+	}
+
+	kfree(txd);
+}
+
+static void s3c24xx_dma_start_next_sg(struct s3c24xx_dma_chan *s3cchan,
+				       struct s3c24xx_txd *txd)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_dma_phy *phy = s3cchan->phy;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_sg *dsg = list_entry(txd->at, struct s3c24xx_sg, node);
+	u32 dcon = txd->dcon;
+	u32 val;
+
+	/* transfer-size and -count from len and width */
+	switch (txd->width) {
+	case 1:
+		dcon |= S3C24XX_DCON_DSZ_BYTE | dsg->len;
+		break;
+	case 2:
+		dcon |= S3C24XX_DCON_DSZ_HALFWORD | (dsg->len / 2);
+		break;
+	case 4:
+		dcon |= S3C24XX_DCON_DSZ_WORD | (dsg->len / 4);
+		break;
+	}
+
+	if (s3cchan->slave) {
+		struct s3c24xx_dma_channel *cdata =
+					&pdata->channels[s3cchan->id];
+
+		if (s3cdma->sdata->has_reqsel) {
+			writel_relaxed((cdata->chansel << 1) |
+							S3C24XX_DMAREQSEL_HW,
+					phy->base + S3C24XX_DMAREQSEL);
+		} else {
+			int csel = cdata->chansel >> (phy->id *
+							S3C24XX_CHANSEL_WIDTH);
+
+			csel &= S3C24XX_CHANSEL_REQ_MASK;
+			dcon |= csel << S3C24XX_DCON_HWSRC_SHIFT;
+			dcon |= S3C24XX_DCON_HWTRIG;
+		}
+	} else {
+		if (s3cdma->sdata->has_reqsel)
+			writel_relaxed(0, phy->base + S3C24XX_DMAREQSEL);
+	}
+
+	writel_relaxed(dsg->src_addr, phy->base + S3C24XX_DISRC);
+	writel_relaxed(txd->disrcc, phy->base + S3C24XX_DISRCC);
+	writel_relaxed(dsg->dst_addr, phy->base + S3C24XX_DIDST);
+	writel_relaxed(txd->didstc, phy->base + S3C24XX_DIDSTC);
+	writel_relaxed(dcon, phy->base + S3C24XX_DCON);
+
+	val = readl_relaxed(phy->base + S3C24XX_DMASKTRIG);
+	val &= ~S3C24XX_DMASKTRIG_STOP;
+	val |= S3C24XX_DMASKTRIG_ON;
+
+	/* trigger the dma operation for memcpy transfers */
+	if (!s3cchan->slave)
+		val |= S3C24XX_DMASKTRIG_SWTRIG;
+
+	writel(val, phy->base + S3C24XX_DMASKTRIG);
+}
+
+/*
+ * Set the initial DMA register values and start first sg.
+ */
+static void s3c24xx_dma_start_next_txd(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_phy *phy = s3cchan->phy;
+	struct virt_dma_desc *vd = vchan_next_desc(&s3cchan->vc);
+	struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx);
+
+	list_del(&txd->vd.node);
+
+	s3cchan->at = txd;
+
+	/* Wait for channel inactive */
+	while (s3c24xx_dma_phy_busy(phy))
+		cpu_relax();
+
+	/* point to the first element of the sg list */
+	txd->at = txd->dsg_list.next;
+	s3c24xx_dma_start_next_sg(s3cchan, txd);
+}
+
+static void s3c24xx_dma_free_txd_list(struct s3c24xx_dma_engine *s3cdma,
+				struct s3c24xx_dma_chan *s3cchan)
+{
+	LIST_HEAD(head);
+
+	vchan_get_all_descriptors(&s3cchan->vc, &head);
+	vchan_dma_desc_free_list(&s3cchan->vc, &head);
+}
+
+/*
+ * Try to allocate a physical channel.  When successful, assign it to
+ * this virtual channel, and initiate the next descriptor.  The
+ * virtual channel lock must be held at this point.
+ */
+static void s3c24xx_dma_phy_alloc_and_start(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_dma_phy *phy;
+
+	phy = s3c24xx_dma_get_phy(s3cchan);
+	if (!phy) {
+		dev_dbg(&s3cdma->pdev->dev, "no physical channel available for xfer on %s\n",
+			s3cchan->name);
+		s3cchan->state = S3C24XX_DMA_CHAN_WAITING;
+		return;
+	}
+
+	dev_dbg(&s3cdma->pdev->dev, "allocated physical channel %d for xfer on %s\n",
+		phy->id, s3cchan->name);
+
+	s3cchan->phy = phy;
+	s3cchan->state = S3C24XX_DMA_CHAN_RUNNING;
+
+	s3c24xx_dma_start_next_txd(s3cchan);
+}
+
+static void s3c24xx_dma_phy_reassign_start(struct s3c24xx_dma_phy *phy,
+	struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+
+	dev_dbg(&s3cdma->pdev->dev, "reassigned physical channel %d for xfer on %s\n",
+		phy->id, s3cchan->name);
+
+	/*
+	 * We do this without taking the lock; we're really only concerned
+	 * about whether this pointer is NULL or not, and we're guaranteed
+	 * that this will only be called when it _already_ is non-NULL.
+	 */
+	phy->serving = s3cchan;
+	s3cchan->phy = phy;
+	s3cchan->state = S3C24XX_DMA_CHAN_RUNNING;
+	s3c24xx_dma_start_next_txd(s3cchan);
+}
+
+/*
+ * Free a physical DMA channel, potentially reallocating it to another
+ * virtual channel if we have any pending.
+ */
+static void s3c24xx_dma_phy_free(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_dma_chan *p, *next;
+
+retry:
+	next = NULL;
+
+	/* Find a waiting virtual channel for the next transfer. */
+	list_for_each_entry(p, &s3cdma->memcpy.channels, vc.chan.device_node)
+		if (p->state == S3C24XX_DMA_CHAN_WAITING) {
+			next = p;
+			break;
+		}
+
+	if (!next) {
+		list_for_each_entry(p, &s3cdma->slave.channels,
+				    vc.chan.device_node)
+			if (p->state == S3C24XX_DMA_CHAN_WAITING &&
+				      s3c24xx_dma_phy_valid(p, s3cchan->phy)) {
+				next = p;
+				break;
+			}
+	}
+
+	/* Ensure that the physical channel is stopped */
+	s3c24xx_dma_terminate_phy(s3cchan->phy);
+
+	if (next) {
+		bool success;
+
+		/*
+		 * Eww.  We know this isn't going to deadlock
+		 * but lockdep probably doesn't.
+		 */
+		spin_lock(&next->vc.lock);
+		/* Re-check the state now that we have the lock */
+		success = next->state == S3C24XX_DMA_CHAN_WAITING;
+		if (success)
+			s3c24xx_dma_phy_reassign_start(s3cchan->phy, next);
+		spin_unlock(&next->vc.lock);
+
+		/* If the state changed, try to find another channel */
+		if (!success)
+			goto retry;
+	} else {
+		/* No more jobs, so free up the physical channel */
+		s3c24xx_dma_put_phy(s3cchan->phy);
+	}
+
+	s3cchan->phy = NULL;
+	s3cchan->state = S3C24XX_DMA_CHAN_IDLE;
+}
+
+static void s3c24xx_dma_unmap_buffers(struct s3c24xx_txd *txd)
+{
+	struct device *dev = txd->vd.tx.chan->device->dev;
+	struct s3c24xx_sg *dsg;
+
+	if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+		if (txd->vd.tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_single(dev, dsg->src_addr, dsg->len,
+						DMA_TO_DEVICE);
+		else {
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_page(dev, dsg->src_addr, dsg->len,
+						DMA_TO_DEVICE);
+		}
+	}
+
+	if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+		if (txd->vd.tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_single(dev, dsg->dst_addr, dsg->len,
+						DMA_FROM_DEVICE);
+		else
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_page(dev, dsg->dst_addr, dsg->len,
+						DMA_FROM_DEVICE);
+	}
+}
+
+static void s3c24xx_dma_desc_free(struct virt_dma_desc *vd)
+{
+	struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx);
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(vd->tx.chan);
+
+	if (!s3cchan->slave)
+		s3c24xx_dma_unmap_buffers(txd);
+
+	s3c24xx_dma_free_txd(txd);
+}
+
+static irqreturn_t s3c24xx_dma_irq(int irq, void *data)
+{
+	struct s3c24xx_dma_phy *phy = data;
+	struct s3c24xx_dma_chan *s3cchan = phy->serving;
+	struct s3c24xx_txd *txd;
+
+	dev_dbg(&phy->host->pdev->dev, "interrupt on channel %d\n", phy->id);
+
+	/*
+	 * Interrupts happen to notify the completion of a transfer and the
+	 * channel should have moved into its stop state already on its own.
+	 * Therefore interrupts on channels not bound to a virtual channel
+	 * should never happen. Nevertheless send a terminate command to the
+	 * channel if the unlikely case happens.
+	 */
+	if (unlikely(!s3cchan)) {
+		dev_err(&phy->host->pdev->dev, "interrupt on unused channel %d\n",
+			phy->id);
+
+		s3c24xx_dma_terminate_phy(phy);
+
+		return IRQ_HANDLED;
+	}
+
+	spin_lock(&s3cchan->vc.lock);
+	txd = s3cchan->at;
+	if (txd) {
+		/* when more sg's are in this txd, start the next one */
+		if (!list_is_last(txd->at, &txd->dsg_list)) {
+			txd->at = txd->at->next;
+			s3c24xx_dma_start_next_sg(s3cchan, txd);
+		} else {
+			s3cchan->at = NULL;
+			vchan_cookie_complete(&txd->vd);
+
+			/*
+			 * And start the next descriptor (if any),
+			 * otherwise free this channel.
+			 */
+			if (vchan_next_desc(&s3cchan->vc))
+				s3c24xx_dma_start_next_txd(s3cchan);
+			else
+				s3c24xx_dma_phy_free(s3cchan);
+		}
+	}
+	spin_unlock(&s3cchan->vc.lock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * The DMA ENGINE API
+ */
+
+static int s3c24xx_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+			 unsigned long arg)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&s3cchan->vc.lock, flags);
+
+	switch (cmd) {
+	case DMA_SLAVE_CONFIG:
+		ret = s3c24xx_dma_set_runtime_config(s3cchan,
+					      (struct dma_slave_config *)arg);
+		break;
+	case DMA_TERMINATE_ALL:
+		if (!s3cchan->phy && !s3cchan->at) {
+			dev_err(&s3cdma->pdev->dev, "trying to terminate already stopped channel %d\n",
+				s3cchan->id);
+			ret = -EINVAL;
+			break;
+		}
+
+		s3cchan->state = S3C24XX_DMA_CHAN_IDLE;
+
+		 /* Mark physical channel as free */
+		if (s3cchan->phy)
+			s3c24xx_dma_phy_free(s3cchan);
+
+		/* Dequeue current job */
+		if (s3cchan->at) {
+			s3c24xx_dma_desc_free(&s3cchan->at->vd);
+			s3cchan->at = NULL;
+		}
+
+		/* Dequeue jobs not yet fired as well */
+		s3c24xx_dma_free_txd_list(s3cdma, s3cchan);
+		break;
+	default:
+		/* Unknown command */
+		ret = -ENXIO;
+		break;
+	}
+
+	spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+
+	return ret;
+}
+
+static int s3c24xx_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+	return 0;
+}
+
+static void s3c24xx_dma_free_chan_resources(struct dma_chan *chan)
+{
+	/* Ensure all queued descriptors are freed */
+	vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+static enum dma_status s3c24xx_dma_tx_status(struct dma_chan *chan,
+		dma_cookie_t cookie, struct dma_tx_state *txstate)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_txd *txd;
+	struct s3c24xx_sg *dsg;
+	struct virt_dma_desc *vd;
+	unsigned long flags;
+	enum dma_status ret;
+	size_t bytes = 0;
+
+	spin_lock_irqsave(&s3cchan->vc.lock, flags);
+	ret = dma_cookie_status(chan, cookie, txstate);
+	if (ret == DMA_SUCCESS) {
+		spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+		return ret;
+	}
+
+	/*
+	 * There's no point calculating the residue if there's
+	 * no txstate to store the value.
+	 */
+	if (!txstate) {
+		spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+		return ret;
+	}
+
+	vd = vchan_find_desc(&s3cchan->vc, cookie);
+	if (vd) {
+		/* On the issued list, so hasn't been processed yet */
+		txd = to_s3c24xx_txd(&vd->tx);
+
+		list_for_each_entry(dsg, &txd->dsg_list, node)
+			bytes += dsg->len;
+	} else {
+		/*
+		 * Currently running, so sum over the pending sg's and
+		 * the currently active one.
+		 */
+		txd = s3cchan->at;
+
+		dsg = list_entry(txd->at, struct s3c24xx_sg, node);
+		list_for_each_entry_from(dsg, &txd->dsg_list, node)
+			bytes += dsg->len;
+
+		bytes += s3c24xx_dma_getbytes_chan(s3cchan);
+	}
+	spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+
+	/*
+	 * This cookie not complete yet
+	 * Get number of bytes left in the active transactions and queue
+	 */
+	dma_set_residue(txstate, bytes);
+
+	/* Whether waiting or running, we're in progress */
+	return ret;
+}
+
+/*
+ * Initialize a descriptor to be used by memcpy submit
+ */
+static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy(
+		struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+		size_t len, unsigned long flags)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_txd *txd;
+	struct s3c24xx_sg *dsg;
+	int src_mod, dest_mod;
+
+	dev_dbg(&s3cdma->pdev->dev, "prepare memcpy of %d bytes from %s\n",
+			len, s3cchan->name);
+
+	if ((len & S3C24XX_DCON_TC_MASK) != len) {
+		dev_err(&s3cdma->pdev->dev, "memcpy size %d to large\n", len);
+		return NULL;
+	}
+
+	txd = s3c24xx_dma_get_txd();
+	if (!txd)
+		return NULL;
+
+	dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
+	if (!dsg) {
+		s3c24xx_dma_free_txd(txd);
+		return NULL;
+	}
+	list_add_tail(&dsg->node, &txd->dsg_list);
+
+	dsg->src_addr = src;
+	dsg->dst_addr = dest;
+	dsg->len = len;
+
+	/*
+	 * Determine a suitable transfer width.
+	 * The DMA controller cannot fetch/store information which is not
+	 * naturally aligned on the bus, i.e., a 4 byte fetch must start at
+	 * an address divisible by 4 - more generally addr % width must be 0.
+	 */
+	src_mod = src % 4;
+	dest_mod = dest % 4;
+	switch (len % 4) {
+	case 0:
+		txd->width = (src_mod == 0 && dest_mod == 0) ? 4 : 1;
+		break;
+	case 2:
+		txd->width = ((src_mod == 2 || src_mod == 0) &&
+			      (dest_mod == 2 || dest_mod == 0)) ? 2 : 1;
+		break;
+	default:
+		txd->width = 1;
+		break;
+	}
+
+	txd->disrcc = S3C24XX_DISRCC_LOC_AHB | S3C24XX_DISRCC_INC_INCREMENT;
+	txd->didstc = S3C24XX_DIDSTC_LOC_AHB | S3C24XX_DIDSTC_INC_INCREMENT;
+	txd->dcon |= S3C24XX_DCON_DEMAND | S3C24XX_DCON_SYNC_HCLK |
+		     S3C24XX_DCON_SERV_WHOLE;
+
+	return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction direction,
+		unsigned long flags, void *context)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
+	struct s3c24xx_txd *txd;
+	struct s3c24xx_sg *dsg;
+	struct scatterlist *sg;
+	dma_addr_t slave_addr;
+	u32 hwcfg = 0;
+	int tmp;
+
+	dev_dbg(&s3cdma->pdev->dev, "prepare transaction of %d bytes from %s\n",
+			sg_dma_len(sgl), s3cchan->name);
+
+	txd = s3c24xx_dma_get_txd();
+	if (!txd)
+		return NULL;
+
+	if (cdata->handshake)
+		txd->dcon |= S3C24XX_DCON_HANDSHAKE;
+
+	switch (cdata->bus) {
+	case S3C24XX_DMA_APB:
+		txd->dcon |= S3C24XX_DCON_SYNC_PCLK;
+		hwcfg |= S3C24XX_DISRCC_LOC_APB;
+		break;
+	case S3C24XX_DMA_AHB:
+		txd->dcon |= S3C24XX_DCON_SYNC_HCLK;
+		hwcfg |= S3C24XX_DISRCC_LOC_AHB;
+		break;
+	}
+
+	/*
+	 * Always assume our peripheral desintation is a fixed
+	 * address in memory.
+	 */
+	hwcfg |= S3C24XX_DISRCC_INC_FIXED;
+
+	/*
+	 * Individual dma operations are requested by the slave,
+	 * so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE).
+	 */
+	txd->dcon |= S3C24XX_DCON_SERV_SINGLE;
+
+	if (direction == DMA_MEM_TO_DEV) {
+		txd->disrcc = S3C24XX_DISRCC_LOC_AHB |
+			      S3C24XX_DISRCC_INC_INCREMENT;
+		txd->didstc = hwcfg;
+		slave_addr = s3cchan->cfg.dst_addr;
+		txd->width = s3cchan->cfg.dst_addr_width;
+	} else if (direction == DMA_DEV_TO_MEM) {
+		txd->disrcc = hwcfg;
+		txd->didstc = S3C24XX_DIDSTC_LOC_AHB |
+			      S3C24XX_DIDSTC_INC_INCREMENT;
+		slave_addr = s3cchan->cfg.src_addr;
+		txd->width = s3cchan->cfg.src_addr_width;
+	} else {
+		s3c24xx_dma_free_txd(txd);
+		dev_err(&s3cdma->pdev->dev,
+			"direction %d unsupported\n", direction);
+		return NULL;
+	}
+
+	for_each_sg(sgl, sg, sg_len, tmp) {
+		dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
+		if (!dsg) {
+			s3c24xx_dma_free_txd(txd);
+			return NULL;
+		}
+		list_add_tail(&dsg->node, &txd->dsg_list);
+
+		dsg->len = sg_dma_len(sg);
+		if (direction == DMA_MEM_TO_DEV) {
+			dsg->src_addr = sg_dma_address(sg);
+			dsg->dst_addr = slave_addr;
+		} else { /* DMA_DEV_TO_MEM */
+			dsg->src_addr = slave_addr;
+			dsg->dst_addr = sg_dma_address(sg);
+		}
+		break;
+	}
+
+	return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
+}
+
+/*
+ * Slave transactions callback to the slave device to allow
+ * synchronization of slave DMA signals with the DMAC enable
+ */
+static void s3c24xx_dma_issue_pending(struct dma_chan *chan)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&s3cchan->vc.lock, flags);
+	if (vchan_issue_pending(&s3cchan->vc)) {
+		if (!s3cchan->phy && s3cchan->state != S3C24XX_DMA_CHAN_WAITING)
+			s3c24xx_dma_phy_alloc_and_start(s3cchan);
+	}
+	spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+}
+
+/*
+ * Bringup and teardown
+ */
+
+/*
+ * Initialise the DMAC memcpy/slave channels.
+ * Make a local wrapper to hold required data
+ */
+static int s3c24xx_dma_init_virtual_channels(struct s3c24xx_dma_engine *s3cdma,
+		struct dma_device *dmadev, unsigned int channels, bool slave)
+{
+	struct s3c24xx_dma_chan *chan;
+	int i;
+
+	INIT_LIST_HEAD(&dmadev->channels);
+
+	/*
+	 * Register as many many memcpy as we have physical channels,
+	 * we won't always be able to use all but the code will have
+	 * to cope with that situation.
+	 */
+	for (i = 0; i < channels; i++) {
+		chan = devm_kzalloc(dmadev->dev, sizeof(*chan), GFP_KERNEL);
+		if (!chan) {
+			dev_err(dmadev->dev,
+				"%s no memory for channel\n", __func__);
+			return -ENOMEM;
+		}
+
+		chan->id = i;
+		chan->host = s3cdma;
+		chan->state = S3C24XX_DMA_CHAN_IDLE;
+
+		if (slave) {
+			chan->slave = true;
+			chan->name = kasprintf(GFP_KERNEL, "slave%d", i);
+			if (!chan->name)
+				return -ENOMEM;
+		} else {
+			chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);
+			if (!chan->name)
+				return -ENOMEM;
+		}
+		dev_dbg(dmadev->dev,
+			 "initialize virtual channel \"%s\"\n",
+			 chan->name);
+
+		chan->vc.desc_free = s3c24xx_dma_desc_free;
+		vchan_init(&chan->vc, dmadev);
+	}
+	dev_info(dmadev->dev, "initialized %d virtual %s channels\n",
+		 i, slave ? "slave" : "memcpy");
+	return i;
+}
+
+static void s3c24xx_dma_free_virtual_channels(struct dma_device *dmadev)
+{
+	struct s3c24xx_dma_chan *chan = NULL;
+	struct s3c24xx_dma_chan *next;
+
+	list_for_each_entry_safe(chan,
+				 next, &dmadev->channels, vc.chan.device_node)
+		list_del(&chan->vc.chan.device_node);
+}
+
+/* s3c2410, s3c2440 and s3c2442 have a 0x40 stride without separate clocks */
+static struct soc_data soc_s3c2410 = {
+	.stride = 0x40,
+	.has_reqsel = false,
+	.has_clocks = false,
+};
+
+/* s3c2412 and s3c2413 have a 0x40 stride and dmareqsel mechanism */
+static struct soc_data soc_s3c2412 = {
+	.stride = 0x40,
+	.has_reqsel = true,
+	.has_clocks = true,
+};
+
+/* s3c2443 and following have a 0x100 stride and dmareqsel mechanism */
+static struct soc_data soc_s3c2443 = {
+	.stride = 0x100,
+	.has_reqsel = true,
+	.has_clocks = true,
+};
+
+static struct platform_device_id s3c24xx_dma_driver_ids[] = {
+	{
+		.name		= "s3c2410-dma",
+		.driver_data	= (kernel_ulong_t)&soc_s3c2410,
+	}, {
+		.name		= "s3c2412-dma",
+		.driver_data	= (kernel_ulong_t)&soc_s3c2412,
+	}, {
+		.name		= "s3c2443-dma",
+		.driver_data	= (kernel_ulong_t)&soc_s3c2443,
+	},
+	{ },
+};
+
+static struct soc_data *s3c24xx_dma_get_soc_data(struct platform_device *pdev)
+{
+	return (struct soc_data *)
+			 platform_get_device_id(pdev)->driver_data;
+}
+
+static int s3c24xx_dma_probe(struct platform_device *pdev)
+{
+	const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev);
+	struct s3c24xx_dma_engine *s3cdma;
+	struct soc_data *sdata;
+	struct resource *res;
+	int ret;
+	int i;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "platform data missing\n");
+		return -ENODEV;
+	}
+
+	/* Basic sanity check */
+	if (pdata->num_phy_channels > MAX_DMA_CHANNELS) {
+		dev_err(&pdev->dev, "to many dma channels %d, max %d\n",
+			pdata->num_phy_channels, MAX_DMA_CHANNELS);
+		return -EINVAL;
+	}
+
+	sdata = s3c24xx_dma_get_soc_data(pdev);
+	if (!sdata)
+		return -EINVAL;
+
+	s3cdma = devm_kzalloc(&pdev->dev, sizeof(*s3cdma), GFP_KERNEL);
+	if (!s3cdma)
+		return -ENOMEM;
+
+	s3cdma->pdev = pdev;
+	s3cdma->pdata = pdata;
+	s3cdma->sdata = sdata;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	s3cdma->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(s3cdma->base))
+		return PTR_ERR(s3cdma->base);
+
+	s3cdma->phy_chans = devm_kzalloc(&pdev->dev,
+					      sizeof(struct s3c24xx_dma_phy) *
+							pdata->num_phy_channels,
+					      GFP_KERNEL);
+	if (!s3cdma->phy_chans)
+		return -ENOMEM;
+
+	/* aquire irqs and clocks for all physical channels */
+	for (i = 0; i < pdata->num_phy_channels; i++) {
+		struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
+		char clk_name[6];
+
+		phy->id = i;
+		phy->base = s3cdma->base + (i * sdata->stride);
+		phy->host = s3cdma;
+
+		phy->irq = platform_get_irq(pdev, i);
+		if (phy->irq < 0) {
+			dev_err(&pdev->dev, "failed to get irq %d, err %d\n",
+				i, phy->irq);
+			continue;
+		}
+
+		ret = devm_request_irq(&pdev->dev, phy->irq, s3c24xx_dma_irq,
+				       0, pdev->name, phy);
+		if (ret) {
+			dev_err(&pdev->dev, "Unable to request irq for channel %d, error %d\n",
+				i, ret);
+			continue;
+		}
+
+		if (sdata->has_clocks) {
+			sprintf(clk_name, "dma.%d", i);
+			phy->clk = devm_clk_get(&pdev->dev, clk_name);
+			if (IS_ERR(phy->clk) && sdata->has_clocks) {
+				dev_err(&pdev->dev, "unable to aquire clock for channel %d, error %lu",
+					i, PTR_ERR(phy->clk));
+				continue;
+			}
+
+			ret = clk_prepare(phy->clk);
+			if (ret) {
+				dev_err(&pdev->dev, "clock for phy %d failed, error %d\n",
+					i, ret);
+				continue;
+			}
+		}
+
+		spin_lock_init(&phy->lock);
+		phy->valid = true;
+
+		dev_dbg(&pdev->dev, "physical channel %d is %s\n",
+			i, s3c24xx_dma_phy_busy(phy) ? "BUSY" : "FREE");
+	}
+
+	/* Initialize memcpy engine */
+	dma_cap_set(DMA_MEMCPY, s3cdma->memcpy.cap_mask);
+	dma_cap_set(DMA_PRIVATE, s3cdma->memcpy.cap_mask);
+	s3cdma->memcpy.dev = &pdev->dev;
+	s3cdma->memcpy.device_alloc_chan_resources =
+					s3c24xx_dma_alloc_chan_resources;
+	s3cdma->memcpy.device_free_chan_resources =
+					s3c24xx_dma_free_chan_resources;
+	s3cdma->memcpy.device_prep_dma_memcpy = s3c24xx_dma_prep_memcpy;
+	s3cdma->memcpy.device_tx_status = s3c24xx_dma_tx_status;
+	s3cdma->memcpy.device_issue_pending = s3c24xx_dma_issue_pending;
+	s3cdma->memcpy.device_control = s3c24xx_dma_control;
+
+	/* Initialize slave engine for SoC internal dedicated peripherals */
+	dma_cap_set(DMA_SLAVE, s3cdma->slave.cap_mask);
+	dma_cap_set(DMA_PRIVATE, s3cdma->slave.cap_mask);
+	s3cdma->slave.dev = &pdev->dev;
+	s3cdma->slave.device_alloc_chan_resources =
+					s3c24xx_dma_alloc_chan_resources;
+	s3cdma->slave.device_free_chan_resources =
+					s3c24xx_dma_free_chan_resources;
+	s3cdma->slave.device_tx_status = s3c24xx_dma_tx_status;
+	s3cdma->slave.device_issue_pending = s3c24xx_dma_issue_pending;
+	s3cdma->slave.device_prep_slave_sg = s3c24xx_dma_prep_slave_sg;
+	s3cdma->slave.device_control = s3c24xx_dma_control;
+
+	/* Register as many memcpy channels as there are physical channels */
+	ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->memcpy,
+						pdata->num_phy_channels, false);
+	if (ret <= 0) {
+		dev_warn(&pdev->dev,
+			 "%s failed to enumerate memcpy channels - %d\n",
+			 __func__, ret);
+		goto err_memcpy;
+	}
+
+	/* Register slave channels */
+	ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->slave,
+				pdata->num_channels, true);
+	if (ret <= 0) {
+		dev_warn(&pdev->dev,
+			"%s failed to enumerate slave channels - %d\n",
+				__func__, ret);
+		goto err_slave;
+	}
+
+	ret = dma_async_device_register(&s3cdma->memcpy);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			"%s failed to register memcpy as an async device - %d\n",
+			__func__, ret);
+		goto err_memcpy_reg;
+	}
+
+	ret = dma_async_device_register(&s3cdma->slave);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			"%s failed to register slave as an async device - %d\n",
+			__func__, ret);
+		goto err_slave_reg;
+	}
+
+	platform_set_drvdata(pdev, s3cdma);
+	dev_info(&pdev->dev, "Loaded dma driver with %d physical channels\n",
+		 pdata->num_phy_channels);
+
+	return 0;
+
+err_slave_reg:
+	dma_async_device_unregister(&s3cdma->memcpy);
+err_memcpy_reg:
+	s3c24xx_dma_free_virtual_channels(&s3cdma->slave);
+err_slave:
+	s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy);
+err_memcpy:
+	if (sdata->has_clocks)
+		for (i = 0; i < pdata->num_phy_channels; i++) {
+			struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
+			if (phy->valid)
+				clk_unprepare(phy->clk);
+		}
+
+	return ret;
+}
+
+static int s3c24xx_dma_remove(struct platform_device *pdev)
+{
+	const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev);
+	struct s3c24xx_dma_engine *s3cdma = platform_get_drvdata(pdev);
+	struct soc_data *sdata = s3c24xx_dma_get_soc_data(pdev);
+	int i;
+
+	dma_async_device_unregister(&s3cdma->slave);
+	dma_async_device_unregister(&s3cdma->memcpy);
+
+	s3c24xx_dma_free_virtual_channels(&s3cdma->slave);
+	s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy);
+
+	if (sdata->has_clocks)
+		for (i = 0; i < pdata->num_phy_channels; i++) {
+			struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
+			if (phy->valid)
+				clk_unprepare(phy->clk);
+		}
+
+	return 0;
+}
+
+static struct platform_driver s3c24xx_dma_driver = {
+	.driver		= {
+		.name	= "s3c24xx-dma",
+		.owner	= THIS_MODULE,
+	},
+	.id_table	= s3c24xx_dma_driver_ids,
+	.probe		= s3c24xx_dma_probe,
+	.remove		= s3c24xx_dma_remove,
+};
+
+module_platform_driver(s3c24xx_dma_driver);
+
+bool s3c24xx_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct s3c24xx_dma_chan *s3cchan;
+
+	if (chan->device->dev->driver != &s3c24xx_dma_driver.driver)
+		return false;
+
+	s3cchan = to_s3c24xx_dma_chan(chan);
+
+	return s3cchan->id == (int)param;
+}
+EXPORT_SYMBOL(s3c24xx_dma_filter);
+
+MODULE_DESCRIPTION("S3C24XX DMA Driver");
+MODULE_AUTHOR("Heiko Stuebner");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 17df6db5dca7..8847adf392b7 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -15,8 +15,9 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-
-#include <asm/mach/irq.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 struct davinci_gpio_regs {
 	u32	dir;
@@ -31,13 +32,14 @@ struct davinci_gpio_regs {
 	u32	intstat;
 };
 
+#define BINTEN	0x8 /* GPIO Interrupt Per-Bank Enable Register */
+
 #define chip2controller(chip)	\
 	container_of(chip, struct davinci_gpio_controller, chip)
 
-static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 static void __iomem *gpio_base;
 
-static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
+static struct davinci_gpio_regs __iomem *gpio2regs(unsigned gpio)
 {
 	void __iomem *ptr;
 
@@ -65,7 +67,7 @@ static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
 	return g;
 }
 
-static int __init davinci_gpio_irq_setup(void);
+static int davinci_gpio_irq_setup(struct platform_device *pdev);
 
 /*--------------------------------------------------------------------------*/
 
@@ -131,33 +133,53 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
 }
 
-static int __init davinci_gpio_setup(void)
+static int davinci_gpio_probe(struct platform_device *pdev)
 {
 	int i, base;
 	unsigned ngpio;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_gpio_regs *regs;
-
-	if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
-		return 0;
+	struct davinci_gpio_controller *chips;
+	struct davinci_gpio_platform_data *pdata;
+	struct davinci_gpio_regs __iomem *regs;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+
+	pdata = dev->platform_data;
+	if (!pdata) {
+		dev_err(dev, "No platform data found\n");
+		return -EINVAL;
+	}
 
 	/*
 	 * The gpio banks conceptually expose a segmented bitmap,
 	 * and "ngpio" is one more than the largest zero-based
 	 * bit index that's valid.
 	 */
-	ngpio = soc_info->gpio_num;
+	ngpio = pdata->ngpio;
 	if (ngpio == 0) {
-		pr_err("GPIO setup:  how many GPIOs?\n");
+		dev_err(dev, "How many GPIOs?\n");
 		return -EINVAL;
 	}
 
 	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
 		ngpio = DAVINCI_N_GPIO;
 
-	gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
-	if (WARN_ON(!gpio_base))
+	chips = devm_kzalloc(dev,
+			     ngpio * sizeof(struct davinci_gpio_controller),
+			     GFP_KERNEL);
+	if (!chips) {
+		dev_err(dev, "Memory allocation failed\n");
 		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "Invalid memory resource\n");
+		return -EBUSY;
+	}
+
+	gpio_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(gpio_base))
+		return PTR_ERR(gpio_base);
 
 	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
 		chips[i].chip.label = "DaVinci";
@@ -183,13 +205,10 @@ static int __init davinci_gpio_setup(void)
 		gpiochip_add(&chips[i].chip);
 	}
 
-	soc_info->gpio_ctlrs = chips;
-	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
-
-	davinci_gpio_irq_setup();
+	platform_set_drvdata(pdev, chips);
+	davinci_gpio_irq_setup(pdev);
 	return 0;
 }
-pure_initcall(davinci_gpio_setup);
 
 /*--------------------------------------------------------------------------*/
 /*
@@ -302,13 +321,14 @@ static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
 
 static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_gpio_controller *d = chip2controller(chip);
 
-	/* NOTE:  we assume for now that only irqs in the first gpio_chip
+	/*
+	 * NOTE:  we assume for now that only irqs in the first gpio_chip
 	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
 	 */
-	if (offset < soc_info->gpio_unbanked)
-		return soc_info->gpio_irq + offset;
+	if (offset < d->irq_base)
+		return d->gpio_irq + offset;
 	else
 		return -ENODEV;
 }
@@ -317,12 +337,11 @@ static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger)
 {
 	struct davinci_gpio_controller *d;
 	struct davinci_gpio_regs __iomem *g;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	u32 mask;
 
 	d = (struct davinci_gpio_controller *)data->handler_data;
 	g = (struct davinci_gpio_regs __iomem *)d->regs;
-	mask = __gpio_mask(data->irq - soc_info->gpio_irq);
+	mask = __gpio_mask(data->irq - d->gpio_irq);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 		return -EINVAL;
@@ -343,24 +362,33 @@ static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger)
  * (dm6446) can be set appropriately for GPIOV33 pins.
  */
 
-static int __init davinci_gpio_irq_setup(void)
+static int davinci_gpio_irq_setup(struct platform_device *pdev)
 {
 	unsigned	gpio, irq, bank;
 	struct clk	*clk;
 	u32		binten = 0;
 	unsigned	ngpio, bank_irq;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_gpio_regs	__iomem *g;
+	struct device *dev = &pdev->dev;
+	struct resource	*res;
+	struct davinci_gpio_controller *chips = platform_get_drvdata(pdev);
+	struct davinci_gpio_platform_data *pdata = dev->platform_data;
+	struct davinci_gpio_regs __iomem *g;
 
-	ngpio = soc_info->gpio_num;
+	ngpio = pdata->ngpio;
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "Invalid IRQ resource\n");
+		return -EBUSY;
+	}
 
-	bank_irq = soc_info->gpio_irq;
-	if (bank_irq == 0) {
-		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
-		return -EINVAL;
+	bank_irq = res->start;
+
+	if (!bank_irq) {
+		dev_err(dev, "Invalid IRQ resource\n");
+		return -ENODEV;
 	}
 
-	clk = clk_get(NULL, "gpio");
+	clk = devm_clk_get(dev, "gpio");
 	if (IS_ERR(clk)) {
 		printk(KERN_ERR "Error %ld getting gpio clock?\n",
 		       PTR_ERR(clk));
@@ -368,16 +396,17 @@ static int __init davinci_gpio_irq_setup(void)
 	}
 	clk_prepare_enable(clk);
 
-	/* Arrange gpio_to_irq() support, handling either direct IRQs or
+	/*
+	 * Arrange gpio_to_irq() support, handling either direct IRQs or
 	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
 	 * IRQs, while the others use banked IRQs, would need some setup
 	 * tweaks to recognize hardware which can do that.
 	 */
 	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
 		chips[bank].chip.to_irq = gpio_to_irq_banked;
-		chips[bank].irq_base = soc_info->gpio_unbanked
+		chips[bank].irq_base = pdata->gpio_unbanked
 			? -EINVAL
-			: (soc_info->intc_irq_num + gpio);
+			: (pdata->intc_irq_num + gpio);
 	}
 
 	/*
@@ -385,7 +414,7 @@ static int __init davinci_gpio_irq_setup(void)
 	 * controller only handling trigger modes.  We currently assume no
 	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
 	 */
-	if (soc_info->gpio_unbanked) {
+	if (pdata->gpio_unbanked) {
 		static struct irq_chip_type gpio_unbanked;
 
 		/* pass "bank 0" GPIO IRQs to AINTC */
@@ -405,7 +434,7 @@ static int __init davinci_gpio_irq_setup(void)
 		__raw_writel(~0, &g->set_rising);
 
 		/* set the direct IRQs up to use that irqchip */
-		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
+		for (gpio = 0; gpio < pdata->gpio_unbanked; gpio++, irq++) {
 			irq_set_chip(irq, &gpio_unbanked.chip);
 			irq_set_handler_data(irq, &chips[gpio / 32]);
 			irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
@@ -450,12 +479,31 @@ static int __init davinci_gpio_irq_setup(void)
 	}
 
 done:
-	/* BINTEN -- per-bank interrupt enable. genirq would also let these
+	/*
+	 * BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
-	__raw_writel(binten, gpio_base + 0x08);
+	__raw_writel(binten, gpio_base + BINTEN);
 
 	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
 	return 0;
 }
+
+static struct platform_driver davinci_gpio_driver = {
+	.probe		= davinci_gpio_probe,
+	.driver		= {
+		.name	= "davinci_gpio",
+		.owner	= THIS_MODULE,
+	},
+};
+
+/**
+ * GPIO driver registration needs to be done before machine_init functions
+ * access GPIO. Hence davinci_gpio_drv_reg() is a postcore_initcall.
+ */
+static int __init davinci_gpio_drv_reg(void)
+{
+	return platform_driver_register(&davinci_gpio_driver);
+}
+postcore_initcall(davinci_gpio_drv_reg);
diff --git a/drivers/gpio/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c
index 3fa3e2867e19..58445bb69106 100644
--- a/drivers/gpio/gpio-tnetv107x.c
+++ b/drivers/gpio/gpio-tnetv107x.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <mach/common.h>
 #include <mach/tnetv107x.h>
diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index bb328a366122..433cc8568dec 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -21,7 +21,10 @@
 #include <linux/io.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/of_pci.h>
 #include <linux/irqdomain.h>
+#include <linux/slab.h>
+#include <linux/msi.h>
 #include <asm/mach/arch.h>
 #include <asm/exception.h>
 #include <asm/smp_plat.h>
@@ -51,12 +54,22 @@
 #define IPI_DOORBELL_START                      (0)
 #define IPI_DOORBELL_END                        (8)
 #define IPI_DOORBELL_MASK                       0xFF
+#define PCI_MSI_DOORBELL_START                  (16)
+#define PCI_MSI_DOORBELL_NR                     (16)
+#define PCI_MSI_DOORBELL_END                    (32)
+#define PCI_MSI_DOORBELL_MASK                   0xFFFF0000
 
 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
 
 static void __iomem *per_cpu_int_base;
 static void __iomem *main_int_base;
 static struct irq_domain *armada_370_xp_mpic_domain;
+#ifdef CONFIG_PCI_MSI
+static struct irq_domain *armada_370_xp_msi_domain;
+static DECLARE_BITMAP(msi_used, PCI_MSI_DOORBELL_NR);
+static DEFINE_MUTEX(msi_used_lock);
+static phys_addr_t msi_doorbell_addr;
+#endif
 
 /*
  * In SMP mode:
@@ -87,6 +100,144 @@ static void armada_370_xp_irq_unmask(struct irq_data *d)
 				ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
 }
 
+#ifdef CONFIG_PCI_MSI
+
+static int armada_370_xp_alloc_msi(void)
+{
+	int hwirq;
+
+	mutex_lock(&msi_used_lock);
+	hwirq = find_first_zero_bit(&msi_used, PCI_MSI_DOORBELL_NR);
+	if (hwirq >= PCI_MSI_DOORBELL_NR)
+		hwirq = -ENOSPC;
+	else
+		set_bit(hwirq, msi_used);
+	mutex_unlock(&msi_used_lock);
+
+	return hwirq;
+}
+
+static void armada_370_xp_free_msi(int hwirq)
+{
+	mutex_lock(&msi_used_lock);
+	if (!test_bit(hwirq, msi_used))
+		pr_err("trying to free unused MSI#%d\n", hwirq);
+	else
+		clear_bit(hwirq, msi_used);
+	mutex_unlock(&msi_used_lock);
+}
+
+static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
+				       struct pci_dev *pdev,
+				       struct msi_desc *desc)
+{
+	struct msi_msg msg;
+	irq_hw_number_t hwirq;
+	int virq;
+
+	hwirq = armada_370_xp_alloc_msi();
+	if (hwirq < 0)
+		return hwirq;
+
+	virq = irq_create_mapping(armada_370_xp_msi_domain, hwirq);
+	if (!virq) {
+		armada_370_xp_free_msi(hwirq);
+		return -EINVAL;
+	}
+
+	irq_set_msi_desc(virq, desc);
+
+	msg.address_lo = msi_doorbell_addr;
+	msg.address_hi = 0;
+	msg.data = 0xf00 | (hwirq + 16);
+
+	write_msi_msg(virq, &msg);
+	return 0;
+}
+
+static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
+					   unsigned int irq)
+{
+	struct irq_data *d = irq_get_irq_data(irq);
+	irq_dispose_mapping(irq);
+	armada_370_xp_free_msi(d->hwirq);
+}
+
+static struct irq_chip armada_370_xp_msi_irq_chip = {
+	.name = "armada_370_xp_msi_irq",
+	.irq_enable = unmask_msi_irq,
+	.irq_disable = mask_msi_irq,
+	.irq_mask = mask_msi_irq,
+	.irq_unmask = unmask_msi_irq,
+};
+
+static int armada_370_xp_msi_map(struct irq_domain *domain, unsigned int virq,
+				 irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(virq, &armada_370_xp_msi_irq_chip,
+				 handle_simple_irq);
+	set_irq_flags(virq, IRQF_VALID);
+
+	return 0;
+}
+
+static const struct irq_domain_ops armada_370_xp_msi_irq_ops = {
+	.map = armada_370_xp_msi_map,
+};
+
+static int armada_370_xp_msi_init(struct device_node *node,
+				  phys_addr_t main_int_phys_base)
+{
+	struct msi_chip *msi_chip;
+	u32 reg;
+	int ret;
+
+	msi_doorbell_addr = main_int_phys_base +
+		ARMADA_370_XP_SW_TRIG_INT_OFFS;
+
+	msi_chip = kzalloc(sizeof(*msi_chip), GFP_KERNEL);
+	if (!msi_chip)
+		return -ENOMEM;
+
+	msi_chip->setup_irq = armada_370_xp_setup_msi_irq;
+	msi_chip->teardown_irq = armada_370_xp_teardown_msi_irq;
+	msi_chip->of_node = node;
+
+	armada_370_xp_msi_domain =
+		irq_domain_add_linear(NULL, PCI_MSI_DOORBELL_NR,
+				      &armada_370_xp_msi_irq_ops,
+				      NULL);
+	if (!armada_370_xp_msi_domain) {
+		kfree(msi_chip);
+		return -ENOMEM;
+	}
+
+	ret = of_pci_msi_chip_add(msi_chip);
+	if (ret < 0) {
+		irq_domain_remove(armada_370_xp_msi_domain);
+		kfree(msi_chip);
+		return ret;
+	}
+
+	reg = readl(per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS)
+		| PCI_MSI_DOORBELL_MASK;
+
+	writel(reg, per_cpu_int_base +
+	       ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
+
+	/* Unmask IPI interrupt */
+	writel(1, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+
+	return 0;
+}
+#else
+static inline int armada_370_xp_msi_init(struct device_node *node,
+					 phys_addr_t main_int_phys_base)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_SMP
 static int armada_xp_set_affinity(struct irq_data *d,
 				  const struct cpumask *mask_val, bool force)
@@ -214,12 +365,39 @@ armada_370_xp_handle_irq(struct pt_regs *regs)
 		if (irqnr > 1022)
 			break;
 
-		if (irqnr > 0) {
+		if (irqnr > 1) {
 			irqnr =	irq_find_mapping(armada_370_xp_mpic_domain,
 					irqnr);
 			handle_IRQ(irqnr, regs);
 			continue;
 		}
+
+#ifdef CONFIG_PCI_MSI
+		/* MSI handling */
+		if (irqnr == 1) {
+			u32 msimask, msinr;
+
+			msimask = readl_relaxed(per_cpu_int_base +
+						ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
+				& PCI_MSI_DOORBELL_MASK;
+
+			writel(~PCI_MSI_DOORBELL_MASK, per_cpu_int_base +
+			       ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
+
+			for (msinr = PCI_MSI_DOORBELL_START;
+			     msinr < PCI_MSI_DOORBELL_END; msinr++) {
+				int irq;
+
+				if (!(msimask & BIT(msinr)))
+					continue;
+
+				irq = irq_find_mapping(armada_370_xp_msi_domain,
+						       msinr - 16);
+				handle_IRQ(irq, regs);
+			}
+		}
+#endif
+
 #ifdef CONFIG_SMP
 		/* IPI Handling */
 		if (irqnr == 0) {
@@ -248,12 +426,25 @@ armada_370_xp_handle_irq(struct pt_regs *regs)
 static int __init armada_370_xp_mpic_of_init(struct device_node *node,
 					     struct device_node *parent)
 {
+	struct resource main_int_res, per_cpu_int_res;
 	u32 control;
 
-	main_int_base = of_iomap(node, 0);
-	per_cpu_int_base = of_iomap(node, 1);
+	BUG_ON(of_address_to_resource(node, 0, &main_int_res));
+	BUG_ON(of_address_to_resource(node, 1, &per_cpu_int_res));
+
+	BUG_ON(!request_mem_region(main_int_res.start,
+				   resource_size(&main_int_res),
+				   node->full_name));
+	BUG_ON(!request_mem_region(per_cpu_int_res.start,
+				   resource_size(&per_cpu_int_res),
+				   node->full_name));
 
+	main_int_base = ioremap(main_int_res.start,
+				resource_size(&main_int_res));
 	BUG_ON(!main_int_base);
+
+	per_cpu_int_base = ioremap(per_cpu_int_res.start,
+				   resource_size(&per_cpu_int_res));
 	BUG_ON(!per_cpu_int_base);
 
 	control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
@@ -262,8 +453,7 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node,
 		irq_domain_add_linear(node, (control >> 2) & 0x3ff,
 				&armada_370_xp_mpic_irq_ops, NULL);
 
-	if (!armada_370_xp_mpic_domain)
-		panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n");
+	BUG_ON(!armada_370_xp_mpic_domain);
 
 	irq_set_default_host(armada_370_xp_mpic_domain);
 
@@ -280,6 +470,8 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node,
 
 #endif
 
+	armada_370_xp_msi_init(node, main_int_res.start);
+
 	set_handle_irq(armada_370_xp_handle_irq);
 
 	return 0;
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 3d9504811126..43186feb4294 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -3,7 +3,7 @@ menu "PCI host controller drivers"
 
 config PCI_MVEBU
 	bool "Marvell EBU PCIe controller"
-	depends on ARCH_MVEBU || ARCH_KIRKWOOD
+	depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD
 	depends on OF
 
 config PCIE_DW
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 729d5a101d62..80b2250ea19a 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -9,13 +9,17 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/mbus.h>
+#include <linux/msi.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/of_address.h>
-#include <linux/of_pci.h>
 #include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/of_pci.h>
 #include <linux/of_platform.h>
 
 /*
@@ -103,6 +107,7 @@ struct mvebu_pcie_port;
 struct mvebu_pcie {
 	struct platform_device *pdev;
 	struct mvebu_pcie_port *ports;
+	struct msi_chip *msi;
 	struct resource io;
 	struct resource realio;
 	struct resource mem;
@@ -115,7 +120,6 @@ struct mvebu_pcie_port {
 	char *name;
 	void __iomem *base;
 	spinlock_t conf_lock;
-	int haslink;
 	u32 port;
 	u32 lane;
 	int devfn;
@@ -124,6 +128,9 @@ struct mvebu_pcie_port {
 	unsigned int io_target;
 	unsigned int io_attr;
 	struct clk *clk;
+	int reset_gpio;
+	int reset_active_low;
+	char *reset_name;
 	struct mvebu_sw_pci_bridge bridge;
 	struct device_node *dn;
 	struct mvebu_pcie *pcie;
@@ -133,29 +140,39 @@ struct mvebu_pcie_port {
 	size_t iowin_size;
 };
 
+static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
+{
+	writel(val, port->base + reg);
+}
+
+static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg)
+{
+	return readl(port->base + reg);
+}
+
 static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
 {
-	return !(readl(port->base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
+	return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
 }
 
 static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
 {
 	u32 stat;
 
-	stat = readl(port->base + PCIE_STAT_OFF);
+	stat = mvebu_readl(port, PCIE_STAT_OFF);
 	stat &= ~PCIE_STAT_BUS;
 	stat |= nr << 8;
-	writel(stat, port->base + PCIE_STAT_OFF);
+	mvebu_writel(port, stat, PCIE_STAT_OFF);
 }
 
 static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
 {
 	u32 stat;
 
-	stat = readl(port->base + PCIE_STAT_OFF);
+	stat = mvebu_readl(port, PCIE_STAT_OFF);
 	stat &= ~PCIE_STAT_DEV;
 	stat |= nr << 16;
-	writel(stat, port->base + PCIE_STAT_OFF);
+	mvebu_writel(port, stat, PCIE_STAT_OFF);
 }
 
 /*
@@ -163,7 +180,7 @@ static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
  * WIN[0-3] -> DRAM bank[0-3]
  */
-static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
+static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
 {
 	const struct mbus_dram_target_info *dram;
 	u32 size;
@@ -173,33 +190,34 @@ static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
 
 	/* First, disable and clear BARs and windows. */
 	for (i = 1; i < 3; i++) {
-		writel(0, port->base + PCIE_BAR_CTRL_OFF(i));
-		writel(0, port->base + PCIE_BAR_LO_OFF(i));
-		writel(0, port->base + PCIE_BAR_HI_OFF(i));
+		mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
+		mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
+		mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i));
 	}
 
 	for (i = 0; i < 5; i++) {
-		writel(0, port->base + PCIE_WIN04_CTRL_OFF(i));
-		writel(0, port->base + PCIE_WIN04_BASE_OFF(i));
-		writel(0, port->base + PCIE_WIN04_REMAP_OFF(i));
+		mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i));
+		mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i));
+		mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
 	}
 
-	writel(0, port->base + PCIE_WIN5_CTRL_OFF);
-	writel(0, port->base + PCIE_WIN5_BASE_OFF);
-	writel(0, port->base + PCIE_WIN5_REMAP_OFF);
+	mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
+	mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
+	mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
 
 	/* Setup windows for DDR banks.  Count total DDR size on the fly. */
 	size = 0;
 	for (i = 0; i < dram->num_cs; i++) {
 		const struct mbus_dram_window *cs = dram->cs + i;
 
-		writel(cs->base & 0xffff0000,
-		       port->base + PCIE_WIN04_BASE_OFF(i));
-		writel(0, port->base + PCIE_WIN04_REMAP_OFF(i));
-		writel(((cs->size - 1) & 0xffff0000) |
-			(cs->mbus_attr << 8) |
-			(dram->mbus_dram_target_id << 4) | 1,
-		       port->base + PCIE_WIN04_CTRL_OFF(i));
+		mvebu_writel(port, cs->base & 0xffff0000,
+			     PCIE_WIN04_BASE_OFF(i));
+		mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
+		mvebu_writel(port,
+			     ((cs->size - 1) & 0xffff0000) |
+			     (cs->mbus_attr << 8) |
+			     (dram->mbus_dram_target_id << 4) | 1,
+			     PCIE_WIN04_CTRL_OFF(i));
 
 		size += cs->size;
 	}
@@ -209,41 +227,40 @@ static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
 		size = 1 << fls(size);
 
 	/* Setup BAR[1] to all DRAM banks. */
-	writel(dram->cs[0].base, port->base + PCIE_BAR_LO_OFF(1));
-	writel(0, port->base + PCIE_BAR_HI_OFF(1));
-	writel(((size - 1) & 0xffff0000) | 1,
-	       port->base + PCIE_BAR_CTRL_OFF(1));
+	mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1));
+	mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
+	mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
+		     PCIE_BAR_CTRL_OFF(1));
 }
 
-static void __init mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
+static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 {
-	u16 cmd;
-	u32 mask;
+	u32 cmd, mask;
 
 	/* Point PCIe unit MBUS decode windows to DRAM space. */
 	mvebu_pcie_setup_wins(port);
 
 	/* Master + slave enable. */
-	cmd = readw(port->base + PCIE_CMD_OFF);
+	cmd = mvebu_readl(port, PCIE_CMD_OFF);
 	cmd |= PCI_COMMAND_IO;
 	cmd |= PCI_COMMAND_MEMORY;
 	cmd |= PCI_COMMAND_MASTER;
-	writew(cmd, port->base + PCIE_CMD_OFF);
+	mvebu_writel(port, cmd, PCIE_CMD_OFF);
 
 	/* Enable interrupt lines A-D. */
-	mask = readl(port->base + PCIE_MASK_OFF);
+	mask = mvebu_readl(port, PCIE_MASK_OFF);
 	mask |= PCIE_MASK_ENABLE_INTS;
-	writel(mask, port->base + PCIE_MASK_OFF);
+	mvebu_writel(port, mask, PCIE_MASK_OFF);
 }
 
 static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
 				 struct pci_bus *bus,
 				 u32 devfn, int where, int size, u32 *val)
 {
-	writel(PCIE_CONF_ADDR(bus->number, devfn, where),
-	       port->base + PCIE_CONF_ADDR_OFF);
+	mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
+		     PCIE_CONF_ADDR_OFF);
 
-	*val = readl(port->base + PCIE_CONF_DATA_OFF);
+	*val = mvebu_readl(port, PCIE_CONF_DATA_OFF);
 
 	if (size == 1)
 		*val = (*val >> (8 * (where & 3))) & 0xff;
@@ -257,21 +274,24 @@ static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
 				 struct pci_bus *bus,
 				 u32 devfn, int where, int size, u32 val)
 {
-	int ret = PCIBIOS_SUCCESSFUL;
+	u32 _val, shift = 8 * (where & 3);
 
-	writel(PCIE_CONF_ADDR(bus->number, devfn, where),
-	       port->base + PCIE_CONF_ADDR_OFF);
+	mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
+		     PCIE_CONF_ADDR_OFF);
+	_val = mvebu_readl(port, PCIE_CONF_DATA_OFF);
 
 	if (size == 4)
-		writel(val, port->base + PCIE_CONF_DATA_OFF);
+		_val = val;
 	else if (size == 2)
-		writew(val, port->base + PCIE_CONF_DATA_OFF + (where & 3));
+		_val = (_val & ~(0xffff << shift)) | ((val & 0xffff) << shift);
 	else if (size == 1)
-		writeb(val, port->base + PCIE_CONF_DATA_OFF + (where & 3));
+		_val = (_val & ~(0xff << shift)) | ((val & 0xff) << shift);
 	else
-		ret = PCIBIOS_BAD_REGISTER_NUMBER;
+		return PCIBIOS_BAD_REGISTER_NUMBER;
 
-	return ret;
+	mvebu_writel(port, _val, PCIE_CONF_DATA_OFF);
+
+	return PCIBIOS_SUCCESSFUL;
 }
 
 static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
@@ -552,7 +572,7 @@ static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 	if (bus->number == 0)
 		return mvebu_sw_pci_bridge_write(port, where, size, val);
 
-	if (!port->haslink)
+	if (!mvebu_pcie_link_up(port))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	/*
@@ -594,7 +614,7 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 	if (bus->number == 0)
 		return mvebu_sw_pci_bridge_read(port, where, size, val);
 
-	if (!port->haslink) {
+	if (!mvebu_pcie_link_up(port)) {
 		*val = 0xffffffff;
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
@@ -626,7 +646,7 @@ static struct pci_ops mvebu_pcie_ops = {
 	.write = mvebu_pcie_wr_conf,
 };
 
-static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
+static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct mvebu_pcie *pcie = sys_to_pcie(sys);
 	int i;
@@ -645,7 +665,7 @@ static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct of_irq oirq;
 	int ret;
@@ -673,11 +693,17 @@ static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 	return bus;
 }
 
-resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
-					  const struct resource *res,
-					  resource_size_t start,
-					  resource_size_t size,
-					  resource_size_t align)
+static void mvebu_pcie_add_bus(struct pci_bus *bus)
+{
+	struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
+	bus->msi = pcie->msi;
+}
+
+static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
+						const struct resource *res,
+						resource_size_t start,
+						resource_size_t size,
+						resource_size_t align)
 {
 	if (dev->bus->number != 0)
 		return start;
@@ -696,7 +722,7 @@ resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
 		return start;
 }
 
-static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie)
+static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
 {
 	struct hw_pci hw;
 
@@ -709,6 +735,7 @@ static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie)
 	hw.map_irq        = mvebu_pcie_map_irq;
 	hw.ops            = &mvebu_pcie_ops;
 	hw.align_resource = mvebu_pcie_align_resource;
+	hw.add_bus        = mvebu_pcie_add_bus;
 
 	pci_common_init(&hw);
 }
@@ -718,10 +745,8 @@ static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie)
  * <...> property for one that matches the given port/lane. Once
  * found, maps it.
  */
-static void __iomem * __init
-mvebu_pcie_map_registers(struct platform_device *pdev,
-			 struct device_node *np,
-			 struct mvebu_pcie_port *port)
+static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
+		      struct device_node *np, struct mvebu_pcie_port *port)
 {
 	struct resource regs;
 	int ret = 0;
@@ -777,7 +802,22 @@ static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
 	return -ENOENT;
 }
 
-static int __init mvebu_pcie_probe(struct platform_device *pdev)
+static void mvebu_pcie_msi_enable(struct mvebu_pcie *pcie)
+{
+	struct device_node *msi_node;
+
+	msi_node = of_parse_phandle(pcie->pdev->dev.of_node,
+				    "msi-parent", 0);
+	if (!msi_node)
+		return;
+
+	pcie->msi = of_pci_find_msi_chip_by_node(msi_node);
+
+	if (pcie->msi)
+		pcie->msi->dev = &pcie->pdev->dev;
+}
+
+static int mvebu_pcie_probe(struct platform_device *pdev)
 {
 	struct mvebu_pcie *pcie;
 	struct device_node *np = pdev->dev.of_node;
@@ -790,6 +830,7 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	pcie->pdev = pdev;
+	platform_set_drvdata(pdev, pcie);
 
 	/* Get the PCIe memory and I/O aperture */
 	mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
@@ -818,13 +859,14 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	i = 0;
 	for_each_child_of_node(pdev->dev.of_node, child) {
 		if (!of_device_is_available(child))
 			continue;
-		pcie->nports++;
+		i++;
 	}
 
-	pcie->ports = devm_kzalloc(&pdev->dev, pcie->nports *
+	pcie->ports = devm_kzalloc(&pdev->dev, i *
 				   sizeof(struct mvebu_pcie_port),
 				   GFP_KERNEL);
 	if (!pcie->ports)
@@ -833,6 +875,7 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 	i = 0;
 	for_each_child_of_node(pdev->dev.of_node, child) {
 		struct mvebu_pcie_port *port = &pcie->ports[i];
+		enum of_gpio_flags flags;
 
 		if (!of_device_is_available(child))
 			continue;
@@ -873,45 +916,68 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 			continue;
 		}
 
+		port->reset_gpio = of_get_named_gpio_flags(child,
+						   "reset-gpios", 0, &flags);
+		if (gpio_is_valid(port->reset_gpio)) {
+			u32 reset_udelay = 20000;
+
+			port->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
+			port->reset_name = kasprintf(GFP_KERNEL,
+				     "pcie%d.%d-reset", port->port, port->lane);
+			of_property_read_u32(child, "reset-delay-us",
+					     &reset_udelay);
+
+			ret = devm_gpio_request_one(&pdev->dev,
+			    port->reset_gpio, GPIOF_DIR_OUT, port->reset_name);
+			if (ret) {
+				if (ret == -EPROBE_DEFER)
+					return ret;
+				continue;
+			}
+
+			gpio_set_value(port->reset_gpio,
+				       (port->reset_active_low) ? 1 : 0);
+			msleep(reset_udelay/1000);
+		}
+
+		port->clk = of_clk_get_by_name(child, NULL);
+		if (IS_ERR(port->clk)) {
+			dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
+			       port->port, port->lane);
+			continue;
+		}
+
+		ret = clk_prepare_enable(port->clk);
+		if (ret)
+			continue;
+
 		port->base = mvebu_pcie_map_registers(pdev, child, port);
 		if (IS_ERR(port->base)) {
 			dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",
 				port->port, port->lane);
 			port->base = NULL;
+			clk_disable_unprepare(port->clk);
 			continue;
 		}
 
 		mvebu_pcie_set_local_dev_nr(port, 1);
 
-		if (mvebu_pcie_link_up(port)) {
-			port->haslink = 1;
-			dev_info(&pdev->dev, "PCIe%d.%d: link up\n",
-				 port->port, port->lane);
-		} else {
-			port->haslink = 0;
-			dev_info(&pdev->dev, "PCIe%d.%d: link down\n",
-				 port->port, port->lane);
-		}
-
 		port->clk = of_clk_get_by_name(child, NULL);
 		if (IS_ERR(port->clk)) {
 			dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
 			       port->port, port->lane);
 			iounmap(port->base);
-			port->haslink = 0;
 			continue;
 		}
 
 		port->dn = child;
-
-		clk_prepare_enable(port->clk);
 		spin_lock_init(&port->conf_lock);
-
 		mvebu_sw_pci_bridge_init(port);
-
 		i++;
 	}
 
+	pcie->nports = i;
+	mvebu_pcie_msi_enable(pcie);
 	mvebu_pcie_enable(pcie);
 
 	return 0;
@@ -920,6 +986,7 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 static const struct of_device_id mvebu_pcie_of_match_table[] = {
 	{ .compatible = "marvell,armada-xp-pcie", },
 	{ .compatible = "marvell,armada-370-pcie", },
+	{ .compatible = "marvell,dove-pcie", },
 	{ .compatible = "marvell,kirkwood-pcie", },
 	{},
 };
@@ -931,16 +998,12 @@ static struct platform_driver mvebu_pcie_driver = {
 		.name = "mvebu-pcie",
 		.of_match_table =
 		   of_match_ptr(mvebu_pcie_of_match_table),
+		/* driver unloading/unbinding currently not supported */
+		.suppress_bind_attrs = true,
 	},
+	.probe = mvebu_pcie_probe,
 };
-
-static int __init mvebu_pcie_init(void)
-{
-	return platform_driver_probe(&mvebu_pcie_driver,
-				     mvebu_pcie_probe);
-}
-
-subsys_initcall(mvebu_pcie_init);
+module_platform_driver(mvebu_pcie_driver);
 
 MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
 MODULE_DESCRIPTION("Marvell EBU PCIe driver");