serial: sh-sci: Move SCSCR_INIT in to platform data.

This moves all of the SCSCR_INIT definitions in to the platform data,
for future consolidation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

2 files changed, 6 insertions, 33 deletions

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 66f52674ca0c..3a13e58e9c5d 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -79,6 +79,9 @@ struct sci_port {
 	struct timer_list	break_timer;
 	int			break_flag;
 
+	/* SCSCR initialization */
+	unsigned int		scscr;
+
 #ifdef CONFIG_HAVE_CLK
 	/* Interface clock */
 	struct clk		*iclk;
@@ -928,6 +931,7 @@ static void sci_shutdown(struct uart_port *port)
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
+	struct sci_port *s = to_sci_port(port);
 	unsigned int status, baud, smr_val;
 	int t = -1;
 
@@ -972,7 +976,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	sci_init_pins(port, termios->c_cflag);
 	sci_out(port, SCFCR, (termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0);
 
-	sci_out(port, SCSCR, SCSCR_INIT(port));
+	sci_out(port, SCSCR, s->scscr);
 
 	if ((termios->c_cflag & CREAD) != 0)
 		sci_start_rx(port, 0);
@@ -1097,6 +1101,7 @@ static void __devinit sci_init_single(struct platform_device *dev,
 	sci_port->port.mapbase	= p->mapbase;
 	sci_port->port.membase	= p->membase;
 
+	sci_port->scscr		= p->scscr;
 	sci_port->port.irq	= p->irqs[SCIx_TXI_IRQ];
 	sci_port->port.flags	= p->flags;
 	sci_port->port.dev	= &dev->dev;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 38072c15b845..4aa0ac8e67dd 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -15,7 +15,6 @@
     defined(CONFIG_CPU_SUBTYPE_SH7709)
 # define SCPCR  0xA4000116 /* 16 bit SCI and SCIF */
 # define SCPDR  0xA4000136 /* 8  bit SCI and SCIF */
-# define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 # define SCIF0		0xA4400000
 # define SCIF2		0xA4410000
@@ -23,15 +22,8 @@
 # define IRDA_SCIF	SCIF0
 # define SCPCR 0xA4000116
 # define SCPDR 0xA4000136
-
-/* Set the clock source,
- * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input
- * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
- */
-# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
-# define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define PORT_PTCR	   0xA405011EUL
 # define PORT_PVCR	   0xA4050122UL
 # define SCIF_ORER	   0x0200   /* overrun error bit */
@@ -39,7 +31,6 @@
 # define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
-# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7750)  || \
       defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
       defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
@@ -49,39 +40,31 @@
 # define SCSPTR1 0xffe0001c /* 8  bit SCI */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
-# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \
-	0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
-	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
 # define SCSPTR0 0xfe600024 /* 16 bit SCIF */
 # define SCSPTR1 0xfe610024 /* 16 bit SCIF */
 # define SCSPTR2 0xfe620024 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
-# define SCSCR_INIT(port)          0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 # define SCSPTR0 0xA4400000	  /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define PACR 0xa4050100
 # define PBCR 0xa4050102
-# define SCSCR_INIT(port)          0x3B
 #elif defined(CONFIG_CPU_SUBTYPE_SH7343)
 # define SCSPTR0 0xffe00010	/* 16 bit SCIF */
 # define SCSPTR1 0xffe10010	/* 16 bit SCIF */
 # define SCSPTR2 0xffe20010	/* 16 bit SCIF */
 # define SCSPTR3 0xffe30010	/* 16 bit SCIF */
-# define SCSCR_INIT(port) 0x32	/* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
 # define PADR			0xA4050120
 # define PSDR			0xA405013e
 # define PWDR			0xA4050166
 # define PSCR			0xA405011E
 # define SCIF_ORER		0x0001	/* overrun error bit */
-# define SCSCR_INIT(port)	0x0038	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7366)
 # define SCPDR0			0xA405013E      /* 16 bit SCIF0 PSDR */
 # define SCSPTR0		SCPDR0
 # define SCIF_ORER		0x0001  /* overrun error bit */
-# define SCSCR_INIT(port)	0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723)
 # define SCSPTR0                0xa4050160
 # define SCSPTR1                0xa405013e
@@ -90,45 +73,34 @@
 # define SCSPTR4                0xa4050128
 # define SCSPTR5                0xa4050128
 # define SCIF_ORER              0x0001  /* overrun error bit */
-# define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7724)
 # define SCIF_ORER              0x0001  /* overrun error bit */
-# define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
-# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
-# define SCIF_BASE_ADDR    0x01030000
-# define SCIF_ADDR_SH5     PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
 # define SCIF_PTR2_OFFS    0x0000020
 # define SCIF_LSR2_OFFS    0x0000024
 # define SCSPTR2           ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
 # define SCLSR2            ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
-# define SCSCR_INIT(port)  0x38		/* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
-# define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_H8S2678)
-# define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 # define SCSPTR0 0xffe00024 /* 16 bit SCIF */
 # define SCSPTR1 0xffe08024 /* 16 bit SCIF */
 # define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
 # define SCIF_ORER 0x0001  /* overrun error bit */
-# define SCSCR_INIT(port)	0x38	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 # define SCSPTR0 0xff923020 /* 16 bit SCIF */
 # define SCSPTR1 0xff924020 /* 16 bit SCIF */
 # define SCSPTR2 0xff925020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
-# define SCSCR_INIT(port)	0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 # define SCSPTR0	0xffe00024	/* 16 bit SCIF */
 # define SCSPTR1	0xffe10024	/* 16 bit SCIF */
 # define SCIF_ORER	0x0001		/* Overrun error bit */
-# define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \
       defined(CONFIG_CPU_SUBTYPE_SH7786)
 # define SCSPTR0	0xffea0024	/* 16 bit SCIF */
@@ -138,7 +110,6 @@
 # define SCSPTR4	0xffee0024	/* 16 bit SCIF */
 # define SCSPTR5	0xffef0024	/* 16 bit SCIF */
 # define SCIF_ORER	0x0001		/* Overrun error bit */
-# define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
       defined(CONFIG_CPU_SUBTYPE_SH7203) || \
       defined(CONFIG_CPU_SUBTYPE_SH7206) || \
@@ -153,20 +124,17 @@
 #  define SCSPTR6 0xfffeB020 /* 16 bit SCIF */
 #  define SCSPTR7 0xfffeB820 /* 16 bit SCIF */
 # endif
-# define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
 # define SCSPTR0 0xf8400020 /* 16 bit SCIF */
 # define SCSPTR1 0xf8410020 /* 16 bit SCIF */
 # define SCSPTR2 0xf8420020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
-# define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SHX3)
 # define SCSPTR0 0xffc30020		/* 16 bit SCIF */
 # define SCSPTR1 0xffc40020		/* 16 bit SCIF */
 # define SCSPTR2 0xffc50020		/* 16 bit SCIF */
 # define SCSPTR3 0xffc60020		/* 16 bit SCIF */
 # define SCIF_ORER 0x0001		/* Overrun error bit */
-# define SCSCR_INIT(port)	0x38	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #else
 # error CPU subtype not defined
 #endif