Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf changes from Ingo Molnar:
 "There are lots of improvements, the biggest changes are:

  Main kernel side changes:

   - Improve uprobes performance by adding 'pre-filtering' support, by
     Oleg Nesterov.

   - Make some POWER7 events available in sysfs, equivalent to what was
     done on x86, from Sukadev Bhattiprolu.

   - tracing updates by Steve Rostedt - mostly misc fixes and smaller
     improvements.

   - Use perf/event tracing to report PCI Express advanced errors, by
     Tony Luck.

   - Enable northbridge performance counters on AMD family 15h, by Jacob
     Shin.

   - This tracing commit:

        tracing: Remove the extra 4 bytes of padding in events

     changes the ABI.  All involved parties (PowerTop in particular)
     seem to agree that it's safe to do now with the introduction of
     libtraceevent, but the devil is in the details ...

  Main tooling side changes:

   - Add 'event group view', from Namyung Kim:

     To use it, 'perf record' should group events when recording.  And
     then perf report parses the saved group relation from file header
     and prints them together if --group option is provided.  You can
     use the 'perf evlist' command to see event group information:

        $ perf record -e '{ref-cycles,cycles}' noploop 1
        [ perf record: Woken up 2 times to write data ]
        [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]

        $ perf evlist --group
        {ref-cycles,cycles}

     With this example, default perf report will show you each event
     separately.

     You can use --group option to enable event group view:

        $ perf report --group
        ...
        # group: {ref-cycles,cycles}
        # ========
        # Samples: 7K of event 'anon group { ref-cycles, cycles }'
        # Event count (approx.): 6876107743
        #
        #         Overhead  Command      Shared Object                      Symbol
        # ................  .......  .................  ..........................
            99.84%  99.76%  noploop  noploop            [.] main
             0.07%   0.00%  noploop  ld-2.15.so         [.] strcmp
             0.03%   0.00%  noploop  [kernel.kallsyms]  [k] timerqueue_del
             0.03%   0.03%  noploop  [kernel.kallsyms]  [k] sched_clock_cpu
             0.02%   0.00%  noploop  [kernel.kallsyms]  [k] account_user_time
             0.01%   0.00%  noploop  [kernel.kallsyms]  [k] __alloc_pages_nodemask
             0.00%   0.00%  noploop  [kernel.kallsyms]  [k] native_write_msr_safe
             0.00%   0.11%  noploop  [kernel.kallsyms]  [k] _raw_spin_lock
             0.00%   0.06%  noploop  [kernel.kallsyms]  [k] find_get_page
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] rcu_check_callbacks
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] __current_kernel_time

     As you can see the Overhead column now contains both of ref-cycles
     and cycles and header line shows group information also - 'anon
     group { ref-cycles, cycles }'.  The output is sorted by period of
     group leader first.

   - Initial GTK+ annotate browser, from Namhyung Kim.

   - Add option for runtime switching perf data file in perf report,
     just press 's' and a menu with the valid files found in the current
     directory will be presented, from Feng Tang.

   - Add support to display whole group data for raw columns, from Jiri
     Olsa.

   - Add per processor socket count aggregation in perf stat, from
     Stephane Eranian.

   - Add interval printing in 'perf stat', from Stephane Eranian.

   - 'perf test' improvements

   - Add support for wildcards in tracepoint system name, from Jiri
     Olsa.

   - Add anonymous huge page recognition, from Joshua Zhu.

   - perf build-id cache now can show DSOs present in a perf.data file
     that are not in the cache, to integrate with build-id servers being
     put in place by organizations such as Fedora.

   - perf top now shares more of the evsel config/creation routines with
     'record', paving the way for further integration like 'top'
     snapshots, etc.

   - perf top now supports DWARF callchains.

   - Fix mmap limitations on 32-bit, fix from David Miller.

   - 'perf bench numa mem' NUMA performance measurement suite

   - ... and lots of fixes, performance improvements, cleanups and other
     improvements I failed to list - see the shortlog and git log for
     details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
  perf/x86/amd: Enable northbridge performance counters on AMD family 15h
  perf/hwbp: Fix cleanup in case of kzalloc failure
  perf tools: Fix build with bison 2.3 and older.
  perf tools: Limit unwind support to x86 archs
  perf annotate: Make it to be able to skip unannotatable symbols
  perf gtk/annotate: Fail early if it can't annotate
  perf gtk/annotate: Show source lines with gray color
  perf gtk/annotate: Support multiple event annotation
  perf ui/gtk: Implement basic GTK2 annotation browser
  perf annotate: Fix warning message on a missing vmlinux
  perf buildid-cache: Add --update option
  uprobes/perf: Avoid uprobe_apply() whenever possible
  uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
  uprobes/perf: Teach trace_uprobe/perf code to pre-filter
  uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
  uprobes: Introduce uprobe_apply()
  perf: Introduce hw_perf_event->tp_target and ->tp_list
  uprobes/perf: Always increment trace_uprobe->nhit
  uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
  uprobes/tracing: Introduce is_trace_uprobe_enabled()
  ...

2 files changed, 50 insertions, 32 deletions

diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c
index e6defd86b424..1e5d8a40101e 100644
--- a/drivers/acpi/apei/cper.c
+++ b/drivers/acpi/apei/cper.c
@@ -29,6 +29,7 @@
 #include <linux/time.h>
 #include <linux/cper.h>
 #include <linux/acpi.h>
+#include <linux/pci.h>
 #include <linux/aer.h>
 
 /*
@@ -249,6 +250,10 @@ static const char *cper_pcie_port_type_strs[] = {
 static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
 			    const struct acpi_hest_generic_data *gdata)
 {
+#ifdef CONFIG_ACPI_APEI_PCIEAER
+	struct pci_dev *dev;
+#endif
+
 	if (pcie->validation_bits & CPER_PCIE_VALID_PORT_TYPE)
 		printk("%s""port_type: %d, %s\n", pfx, pcie->port_type,
 		       pcie->port_type < ARRAY_SIZE(cper_pcie_port_type_strs) ?
@@ -281,10 +286,18 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
 	"%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
 	pfx, pcie->bridge.secondary_status, pcie->bridge.control);
 #ifdef CONFIG_ACPI_APEI_PCIEAER
-	if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) {
-		struct aer_capability_regs *aer_regs = (void *)pcie->aer_info;
-		cper_print_aer(pfx, gdata->error_severity, aer_regs);
+	dev = pci_get_domain_bus_and_slot(pcie->device_id.segment,
+			pcie->device_id.bus, pcie->device_id.function);
+	if (!dev) {
+		pr_err("PCI AER Cannot get PCI device %04x:%02x:%02x.%d\n",
+			pcie->device_id.segment, pcie->device_id.bus,
+			pcie->device_id.slot, pcie->device_id.function);
+		return;
 	}
+	if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO)
+		cper_print_aer(pfx, dev, gdata->error_severity,
+				(struct aer_capability_regs *) pcie->aer_info);
+	pci_dev_put(dev);
 #endif
 }
 
diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c
index 3ea51736f18d..5ab14251839d 100644
--- a/drivers/pci/pcie/aer/aerdrv_errprint.c
+++ b/drivers/pci/pcie/aer/aerdrv_errprint.c
@@ -23,6 +23,9 @@
 
 #include "aerdrv.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/ras.h>
+
 #define AER_AGENT_RECEIVER		0
 #define AER_AGENT_REQUESTER		1
 #define AER_AGENT_COMPLETER		2
@@ -121,12 +124,11 @@ static const char *aer_agent_string[] = {
 	"Transmitter ID"
 };
 
-static void __aer_print_error(const char *prefix,
+static void __aer_print_error(struct pci_dev *dev,
 			      struct aer_err_info *info)
 {
 	int i, status;
 	const char *errmsg = NULL;
-
 	status = (info->status & ~info->mask);
 
 	for (i = 0; i < 32; i++) {
@@ -141,26 +143,22 @@ static void __aer_print_error(const char *prefix,
 				aer_uncorrectable_error_string[i] : NULL;
 
 		if (errmsg)
-			printk("%s""   [%2d] %-22s%s\n", prefix, i, errmsg,
+			dev_err(&dev->dev, "   [%2d] %-22s%s\n", i, errmsg,
 				info->first_error == i ? " (First)" : "");
 		else
-			printk("%s""   [%2d] Unknown Error Bit%s\n", prefix, i,
-				info->first_error == i ? " (First)" : "");
+			dev_err(&dev->dev, "   [%2d] Unknown Error Bit%s\n",
+				i, info->first_error == i ? " (First)" : "");
 	}
 }
 
 void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
 {
 	int id = ((dev->bus->number << 8) | dev->devfn);
-	char prefix[44];
-
-	snprintf(prefix, sizeof(prefix), "%s%s %s: ",
-		 (info->severity == AER_CORRECTABLE) ? KERN_WARNING : KERN_ERR,
-		 dev_driver_string(&dev->dev), dev_name(&dev->dev));
 
 	if (info->status == 0) {
-		printk("%s""PCIe Bus Error: severity=%s, type=Unaccessible, "
-			"id=%04x(Unregistered Agent ID)\n", prefix,
+		dev_err(&dev->dev,
+			"PCIe Bus Error: severity=%s, type=Unaccessible, "
+			"id=%04x(Unregistered Agent ID)\n",
 			aer_error_severity_string[info->severity], id);
 	} else {
 		int layer, agent;
@@ -168,22 +166,24 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
 		layer = AER_GET_LAYER_ERROR(info->severity, info->status);
 		agent = AER_GET_AGENT(info->severity, info->status);
 
-		printk("%s""PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
-			prefix, aer_error_severity_string[info->severity],
+		dev_err(&dev->dev,
+			"PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
+			aer_error_severity_string[info->severity],
 			aer_error_layer[layer], id, aer_agent_string[agent]);
 
-		printk("%s""  device [%04x:%04x] error status/mask=%08x/%08x\n",
-			prefix, dev->vendor, dev->device,
+		dev_err(&dev->dev,
+			"  device [%04x:%04x] error status/mask=%08x/%08x\n",
+			dev->vendor, dev->device,
 			info->status, info->mask);
 
-		__aer_print_error(prefix, info);
+		__aer_print_error(dev, info);
 
 		if (info->tlp_header_valid) {
 			unsigned char *tlp = (unsigned char *) &info->tlp;
-			printk("%s""  TLP Header:"
+			dev_err(&dev->dev, "  TLP Header:"
 				" %02x%02x%02x%02x %02x%02x%02x%02x"
 				" %02x%02x%02x%02x %02x%02x%02x%02x\n",
-				prefix, *(tlp + 3), *(tlp + 2), *(tlp + 1), *tlp,
+				*(tlp + 3), *(tlp + 2), *(tlp + 1), *tlp,
 				*(tlp + 7), *(tlp + 6), *(tlp + 5), *(tlp + 4),
 				*(tlp + 11), *(tlp + 10), *(tlp + 9),
 				*(tlp + 8), *(tlp + 15), *(tlp + 14),
@@ -192,8 +192,11 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
 	}
 
 	if (info->id && info->error_dev_num > 1 && info->id == id)
-		printk("%s""  Error of this Agent(%04x) is reported first\n",
-			prefix, id);
+		dev_err(&dev->dev,
+			   "  Error of this Agent(%04x) is reported first\n",
+			id);
+	trace_aer_event(dev_name(&dev->dev), (info->status & ~info->mask),
+			info->severity);
 }
 
 void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info)
@@ -217,7 +220,7 @@ int cper_severity_to_aer(int cper_severity)
 }
 EXPORT_SYMBOL_GPL(cper_severity_to_aer);
 
-void cper_print_aer(const char *prefix, int cper_severity,
+void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity,
 		    struct aer_capability_regs *aer)
 {
 	int aer_severity, layer, agent, status_strs_size, tlp_header_valid = 0;
@@ -239,25 +242,27 @@ void cper_print_aer(const char *prefix, int cper_severity,
 	}
 	layer = AER_GET_LAYER_ERROR(aer_severity, status);
 	agent = AER_GET_AGENT(aer_severity, status);
-	printk("%s""aer_status: 0x%08x, aer_mask: 0x%08x\n",
-	       prefix, status, mask);
+	dev_err(&dev->dev, "aer_status: 0x%08x, aer_mask: 0x%08x\n",
+	       status, mask);
 	cper_print_bits(prefix, status, status_strs, status_strs_size);
-	printk("%s""aer_layer=%s, aer_agent=%s\n", prefix,
+	dev_err(&dev->dev, "aer_layer=%s, aer_agent=%s\n",
 	       aer_error_layer[layer], aer_agent_string[agent]);
 	if (aer_severity != AER_CORRECTABLE)
-		printk("%s""aer_uncor_severity: 0x%08x\n",
-		       prefix, aer->uncor_severity);
+		dev_err(&dev->dev, "aer_uncor_severity: 0x%08x\n",
+		       aer->uncor_severity);
 	if (tlp_header_valid) {
 		const unsigned char *tlp;
 		tlp = (const unsigned char *)&aer->header_log;
-		printk("%s""aer_tlp_header:"
+		dev_err(&dev->dev, "aer_tlp_header:"
 			" %02x%02x%02x%02x %02x%02x%02x%02x"
 			" %02x%02x%02x%02x %02x%02x%02x%02x\n",
-			prefix, *(tlp + 3), *(tlp + 2), *(tlp + 1), *tlp,
+			*(tlp + 3), *(tlp + 2), *(tlp + 1), *tlp,
 			*(tlp + 7), *(tlp + 6), *(tlp + 5), *(tlp + 4),
 			*(tlp + 11), *(tlp + 10), *(tlp + 9),
 			*(tlp + 8), *(tlp + 15), *(tlp + 14),
 			*(tlp + 13), *(tlp + 12));
 	}
+	trace_aer_event(dev_name(&dev->dev), (status & ~mask),
+			aer_severity);
 }
 #endif