x86, platforms: Remove SGI Visual Workstation

The SGI Visual Workstation seems to be dead; remove support so we
don't have to continue maintaining it.

Cc: Andrey Panin <pazke@donpac.ru>
Cc: Michael Reed <mdr@sgi.com>
Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

8 files changed, 3 insertions, 914 deletions

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 17d2b07ee67c..9d5ee4dcee7d 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PPC) += setup-bus.o
 obj-$(CONFIG_FRV) += setup-bus.o
 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
-obj-$(CONFIG_X86_VISWS) += setup-irq.o
 obj-$(CONFIG_MN10300) += setup-bus.o
 obj-$(CONFIG_MICROBLAZE) += setup-bus.o
 obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 97dabd39b092..158020522dfb 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -379,14 +379,7 @@
 #define  DEBUG_PRINT_NVRAM	0
 #define  DEBUG_QLA1280		0
 
-/*
- * The SGI VISWS is broken and doesn't support MMIO ;-(
- */
-#ifdef CONFIG_X86_VISWS
-#define	MEMORY_MAPPED_IO	0
-#else
 #define	MEMORY_MAPPED_IO	1
-#endif
 
 #include "qla1280.h"
 
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 22262a3a0e2d..acc049359366 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -802,18 +802,9 @@ config FB_HGA
 	  As this card technology is at least 25 years old,
 	  most people will answer N here.
 
-config FB_SGIVW
-	tristate "SGI Visual Workstation framebuffer support"
-	depends on FB && X86_VISWS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  SGI Visual Workstation support for framebuffer graphics.
-
 config FB_GBE
 	bool "SGI Graphics Backend frame buffer support"
-	depends on (FB = y) && (SGI_IP32 || X86_VISWS)
+	depends on (FB = y) && SGI_IP32
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index ae17ddf49a00..dc096179e93e 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -75,7 +75,6 @@ obj-$(CONFIG_FB_CG14)             += cg14.o sbuslib.o
 obj-$(CONFIG_FB_P9100)            += p9100.o sbuslib.o
 obj-$(CONFIG_FB_TCX)              += tcx.o sbuslib.o
 obj-$(CONFIG_FB_LEO)              += leo.o sbuslib.o
-obj-$(CONFIG_FB_SGIVW)            += sgivwfb.o
 obj-$(CONFIG_FB_ACORN)            += acornfb.o
 obj-$(CONFIG_FB_ATARI)            += atafb.o c2p_iplan2.o atafb_mfb.o \
                                      atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 4c7cb368a9dc..3ec65a878ac8 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -45,10 +45,6 @@ struct gbefb_par {
 #define GBE_BASE	0x16000000 /* SGI O2 */
 #endif
 
-#ifdef CONFIG_X86_VISWS
-#define GBE_BASE	0xd0000000 /* SGI Visual Workstation */
-#endif
-
 /* macro for fastest write-though access to the framebuffer */
 #ifdef CONFIG_MIPS
 #ifdef CONFIG_CPU_R10000
diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
index 39ac49e0682c..0037104d66ac 100644
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -54,7 +54,7 @@ config LOGO_PARISC_CLUT224
 
 config LOGO_SGI_CLUT224
 	bool "224-color SGI Linux logo"
-	depends on SGI_IP22 || SGI_IP27 || SGI_IP32 || X86_VISWS
+	depends on SGI_IP22 || SGI_IP27 || SGI_IP32
 	default y
 
 config LOGO_SUN_CLUT224
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index b670cbda38e3..940cd196eef5 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -81,7 +81,7 @@ const struct linux_logo * __init_refok fb_find_logo(int depth)
 		logo = &logo_parisc_clut224;
 #endif
 #ifdef CONFIG_LOGO_SGI_CLUT224
-		/* SGI Linux logo on MIPS/MIPS64 and VISWS */
+		/* SGI Linux logo on MIPS/MIPS64 */
 		logo = &logo_sgi_clut224;
 #endif
 #ifdef CONFIG_LOGO_SUN_CLUT224
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
deleted file mode 100644
index bc74d0408998..000000000000
--- a/drivers/video/sgivwfb.c
+++ /dev/null
@@ -1,889 +0,0 @@
-/*
- *  linux/drivers/video/sgivwfb.c -- SGI DBE frame buffer device
- *
- *	Copyright (C) 1999 Silicon Graphics, Inc.
- *      Jeffrey Newquist, newquist@engr.sgi.som
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/mtrr.h>
-#include <asm/visws/sgivw.h>
-
-#define INCLUDE_TIMING_TABLE_DATA
-#define DBE_REG_BASE par->regs
-#include <video/sgivw.h>
-
-struct sgivw_par {
-	struct asregs *regs;
-	u32 cmap_fifo;
-	u_long timing_num;
-};
-
-#define FLATPANEL_SGI_1600SW	5
-
-/*
- *  RAM we reserve for the frame buffer. This defines the maximum screen
- *  size
- *
- *  The default can be overridden if the driver is compiled as a module
- */
-
-static int ypan = 0;
-static int ywrap = 0;
-
-static int flatpanel_id = -1;
-
-static struct fb_fix_screeninfo sgivwfb_fix = {
-	.id		= "SGI Vis WS FB",
-	.type		= FB_TYPE_PACKED_PIXELS,
-        .visual		= FB_VISUAL_PSEUDOCOLOR,
-	.mmio_start	= DBE_REG_PHYS,
-	.mmio_len	= DBE_REG_SIZE,
-        .accel		= FB_ACCEL_NONE,
-	.line_length	= 640,
-};
-
-static struct fb_var_screeninfo sgivwfb_var = {
-	/* 640x480, 8 bpp */
-	.xres		= 640,
-	.yres		= 480,
-	.xres_virtual	= 640,
-	.yres_virtual	= 480,
-	.bits_per_pixel	= 8,
-	.red		= { 0, 8, 0 },
-	.green		= { 0, 8, 0 },
-	.blue		= { 0, 8, 0 },
-	.height		= -1,
-	.width		= -1,
-	.pixclock	= 20000,
-	.left_margin	= 64,
-	.right_margin	= 64,
-	.upper_margin	= 32,
-	.lower_margin	= 32,
-	.hsync_len	= 64,
-	.vsync_len	= 2,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-static struct fb_var_screeninfo sgivwfb_var1600sw = {
-	/* 1600x1024, 8 bpp */
-	.xres		= 1600,
-	.yres		= 1024,
-	.xres_virtual	= 1600,
-	.yres_virtual	= 1024,
-	.bits_per_pixel	= 8,
-	.red		= { 0, 8, 0 },
-	.green		= { 0, 8, 0 },
-	.blue		= { 0, 8, 0 },
-	.height		= -1,
-	.width		= -1,
-	.pixclock	= 9353,
-	.left_margin	= 20,
-	.right_margin	= 30,
-	.upper_margin	= 37,
-	.lower_margin	= 3,
-	.hsync_len	= 20,
-	.vsync_len	= 3,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-/*
- *  Interface used by the world
- */
-int sgivwfb_init(void);
-
-static int sgivwfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
-static int sgivwfb_set_par(struct fb_info *info);
-static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
-			     u_int blue, u_int transp,
-			     struct fb_info *info);
-static int sgivwfb_mmap(struct fb_info *info,
-			struct vm_area_struct *vma);
-
-static struct fb_ops sgivwfb_ops = {
-	.owner		= THIS_MODULE,
-	.fb_check_var	= sgivwfb_check_var,
-	.fb_set_par	= sgivwfb_set_par,
-	.fb_setcolreg	= sgivwfb_setcolreg,
-	.fb_fillrect	= cfb_fillrect,
-	.fb_copyarea	= cfb_copyarea,
-	.fb_imageblit	= cfb_imageblit,
-	.fb_mmap	= sgivwfb_mmap,
-};
-
-/*
- *  Internal routines
- */
-static unsigned long bytes_per_pixel(int bpp)
-{
-	switch (bpp) {
-		case 8:
-			return 1;
-		case 16:
-			return 2;
-		case 32:
-			return 4;
-		default:
-			printk(KERN_INFO "sgivwfb: unsupported bpp %d\n", bpp);
-			return 0;
-	}
-}
-
-static unsigned long get_line_length(int xres_virtual, int bpp)
-{
-	return (xres_virtual * bytes_per_pixel(bpp));
-}
-
-/*
- * Function:	dbe_TurnOffDma
- * Parameters:	(None)
- * Description:	This should turn off the monitor and dbe.  This is used
- *              when switching between the serial console and the graphics
- *              console.
- */
-
-static void dbe_TurnOffDma(struct sgivw_par *par)
-{
-	unsigned int readVal;
-	int i;
-
-	// Check to see if things are already turned off:
-	// 1) Check to see if dbe is not using the internal dotclock.
-	// 2) Check to see if the xy counter in dbe is already off.
-
-	DBE_GETREG(ctrlstat, readVal);
-	if (GET_DBE_FIELD(CTRLSTAT, PCLKSEL, readVal) < 2)
-		return;
-
-	DBE_GETREG(vt_xy, readVal);
-	if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1)
-		return;
-
-	// Otherwise, turn off dbe
-
-	DBE_GETREG(ovr_control, readVal);
-	SET_DBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, readVal, 0);
-	DBE_SETREG(ovr_control, readVal);
-	udelay(1000);
-	DBE_GETREG(frm_control, readVal);
-	SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, readVal, 0);
-	DBE_SETREG(frm_control, readVal);
-	udelay(1000);
-	DBE_GETREG(did_control, readVal);
-	SET_DBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, readVal, 0);
-	DBE_SETREG(did_control, readVal);
-	udelay(1000);
-
-	// XXX HACK:
-	//
-	//    This was necessary for GBE--we had to wait through two
-	//    vertical retrace periods before the pixel DMA was
-	//    turned off for sure.  I've left this in for now, in
-	//    case dbe needs it.
-
-	for (i = 0; i < 10000; i++) {
-		DBE_GETREG(frm_inhwctrl, readVal);
-		if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) ==
-		    0)
-			udelay(10);
-		else {
-			DBE_GETREG(ovr_inhwctrl, readVal);
-			if (GET_DBE_FIELD
-			    (OVR_INHWCTRL, OVR_DMA_ENABLE, readVal) == 0)
-				udelay(10);
-			else {
-				DBE_GETREG(did_inhwctrl, readVal);
-				if (GET_DBE_FIELD
-				    (DID_INHWCTRL, DID_DMA_ENABLE,
-				     readVal) == 0)
-					udelay(10);
-				else
-					break;
-			}
-		}
-	}
-}
-
-/*
- *  Set the User Defined Part of the Display. Again if par use it to get
- *  real video mode.
- */
-static int sgivwfb_check_var(struct fb_var_screeninfo *var, 
-			     struct fb_info *info)
-{
-	struct sgivw_par *par = (struct sgivw_par *)info->par;
-	struct dbe_timing_info *timing;
-	u_long line_length;
-	u_long min_mode;
-	int req_dot;
-	int test_mode;
-
-	/*
-	 *  FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
-	 *  as FB_VMODE_SMOOTH_XPAN is only used internally
-	 */
-
-	if (var->vmode & FB_VMODE_CONUPDATE) {
-		var->vmode |= FB_VMODE_YWRAP;
-		var->xoffset = info->var.xoffset;
-		var->yoffset = info->var.yoffset;
-	}
-
-	/* XXX FIXME - forcing var's */
-	var->xoffset = 0;
-	var->yoffset = 0;
-
-	/* Limit bpp to 8, 16, and 32 */
-	if (var->bits_per_pixel <= 8)
-		var->bits_per_pixel = 8;
-	else if (var->bits_per_pixel <= 16)
-		var->bits_per_pixel = 16;
-	else if (var->bits_per_pixel <= 32)
-		var->bits_per_pixel = 32;
-	else
-		return -EINVAL;
-
-	var->grayscale = 0;	/* No grayscale for now */
-
-	/* determine valid resolution and timing */
-	for (min_mode = 0; min_mode < ARRAY_SIZE(dbeVTimings); min_mode++) {
-		if (dbeVTimings[min_mode].width >= var->xres &&
-		    dbeVTimings[min_mode].height >= var->yres)
-			break;
-	}
-
-	if (min_mode == ARRAY_SIZE(dbeVTimings))
-		return -EINVAL;	/* Resolution to high */
-
-	/* XXX FIXME - should try to pick best refresh rate */
-	/* for now, pick closest dot-clock within 3MHz */
-	req_dot = PICOS2KHZ(var->pixclock);
-	printk(KERN_INFO "sgivwfb: requested pixclock=%d ps (%d KHz)\n",
-	       var->pixclock, req_dot);
-	test_mode = min_mode;
-	while (dbeVTimings[min_mode].width == dbeVTimings[test_mode].width) {
-		if (dbeVTimings[test_mode].cfreq + 3000 > req_dot)
-			break;
-		test_mode++;
-	}
-	if (dbeVTimings[min_mode].width != dbeVTimings[test_mode].width)
-		test_mode--;
-	min_mode = test_mode;
-	timing = &dbeVTimings[min_mode];
-	printk(KERN_INFO "sgivwfb: granted dot-clock=%d KHz\n", timing->cfreq);
-
-	/* Adjust virtual resolution, if necessary */
-	if (var->xres > var->xres_virtual || (!ywrap && !ypan))
-		var->xres_virtual = var->xres;
-	if (var->yres > var->yres_virtual || (!ywrap && !ypan))
-		var->yres_virtual = var->yres;
-
-	/*
-	 *  Memory limit
-	 */
-	line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
-	if (line_length * var->yres_virtual > sgivwfb_mem_size)
-		return -ENOMEM;	/* Virtual resolution to high */
-
-	info->fix.line_length = line_length;
-
-	switch (var->bits_per_pixel) {
-	case 8:
-		var->red.offset = 0;
-		var->red.length = 8;
-		var->green.offset = 0;
-		var->green.length = 8;
-		var->blue.offset = 0;
-		var->blue.length = 8;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		break;
-	case 16:		/* RGBA 5551 */
-		var->red.offset = 11;
-		var->red.length = 5;
-		var->green.offset = 6;
-		var->green.length = 5;
-		var->blue.offset = 1;
-		var->blue.length = 5;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		break;
-	case 32:		/* RGB 8888 */
-		var->red.offset = 0;
-		var->red.length = 8;
-		var->green.offset = 8;
-		var->green.length = 8;
-		var->blue.offset = 16;
-		var->blue.length = 8;
-		var->transp.offset = 24;
-		var->transp.length = 8;
-		break;
-	}
-	var->red.msb_right = 0;
-	var->green.msb_right = 0;
-	var->blue.msb_right = 0;
-	var->transp.msb_right = 0;
-
-	/* set video timing information */
-	var->pixclock = KHZ2PICOS(timing->cfreq);
-	var->left_margin = timing->htotal - timing->hsync_end;
-	var->right_margin = timing->hsync_start - timing->width;
-	var->upper_margin = timing->vtotal - timing->vsync_end;
-	var->lower_margin = timing->vsync_start - timing->height;
-	var->hsync_len = timing->hsync_end - timing->hsync_start;
-	var->vsync_len = timing->vsync_end - timing->vsync_start;
-
-	/* Ouch. This breaks the rules but timing_num is only important if you
-	* change a video mode */
-	par->timing_num = min_mode;
-
-	printk(KERN_INFO "sgivwfb: new video mode xres=%d yres=%d bpp=%d\n",
-		var->xres, var->yres, var->bits_per_pixel);
-	printk(KERN_INFO "         vxres=%d vyres=%d\n", var->xres_virtual,
-		var->yres_virtual);
-	return 0;
-}
-
-/*
- *  Setup flatpanel related registers.
- */
-static void sgivwfb_setup_flatpanel(struct sgivw_par *par, struct dbe_timing_info *currentTiming)
-{
-	int fp_wid, fp_hgt, fp_vbs, fp_vbe;
-	u32 outputVal = 0;
-
-	SET_DBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal, 
-		(currentTiming->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1);
-	SET_DBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal, 
-		(currentTiming->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1);
-	DBE_SETREG(vt_flags, outputVal);
-
-	/* Turn on the flat panel */
-	switch (flatpanel_id) {
-		case FLATPANEL_SGI_1600SW:
-			fp_wid = 1600;
-			fp_hgt = 1024;
-			fp_vbs = 0;
-			fp_vbe = 1600;
-			currentTiming->pll_m = 4;
-			currentTiming->pll_n = 1;
-			currentTiming->pll_p = 0;
-			break;
-		default:
-      			fp_wid = fp_hgt = fp_vbs = fp_vbe = 0xfff;
-  	}
-
-	outputVal = 0;
-	SET_DBE_FIELD(FP_DE, FP_DE_ON, outputVal, fp_vbs);
-	SET_DBE_FIELD(FP_DE, FP_DE_OFF, outputVal, fp_vbe);
-	DBE_SETREG(fp_de, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(FP_HDRV, FP_HDRV_OFF, outputVal, fp_wid);
-	DBE_SETREG(fp_hdrv, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(FP_VDRV, FP_VDRV_ON, outputVal, 1);
-	SET_DBE_FIELD(FP_VDRV, FP_VDRV_OFF, outputVal, fp_hgt + 1);
-	DBE_SETREG(fp_vdrv, outputVal);
-}
-
-/*
- *  Set the hardware according to 'par'.
- */
-static int sgivwfb_set_par(struct fb_info *info)
-{
-	struct sgivw_par *par = info->par;
-	int i, j, htmp, temp;
-	u32 readVal, outputVal;
-	int wholeTilesX, maxPixelsPerTileX;
-	int frmWrite1, frmWrite2, frmWrite3b;
-	struct dbe_timing_info *currentTiming; /* Current Video Timing */
-	int xpmax, ypmax;	// Monitor resolution
-	int bytesPerPixel;	// Bytes per pixel
-
-	currentTiming = &dbeVTimings[par->timing_num];
-	bytesPerPixel = bytes_per_pixel(info->var.bits_per_pixel);
-	xpmax = currentTiming->width;
-	ypmax = currentTiming->height;
-
-	/* dbe_InitGraphicsBase(); */
-	/* Turn on dotclock PLL */
-	DBE_SETREG(ctrlstat, 0x20000000);
-
-	dbe_TurnOffDma(par);
-
-	/* dbe_CalculateScreenParams(); */
-	maxPixelsPerTileX = 512 / bytesPerPixel;
-	wholeTilesX = xpmax / maxPixelsPerTileX;
-	if (wholeTilesX * maxPixelsPerTileX < xpmax)
-		wholeTilesX++;
-
-	printk(KERN_DEBUG "sgivwfb: pixPerTile=%d wholeTilesX=%d\n",
-	       maxPixelsPerTileX, wholeTilesX);
-
-	/* dbe_InitGammaMap(); */
-	udelay(10);
-
-	for (i = 0; i < 256; i++) {
-		DBE_ISETREG(gmap, i, (i << 24) | (i << 16) | (i << 8));
-	}
-
-	/* dbe_TurnOn(); */
-	DBE_GETREG(vt_xy, readVal);
-	if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1) {
-		DBE_SETREG(vt_xy, 0x00000000);
-		udelay(1);
-	} else
-		dbe_TurnOffDma(par);
-
-	/* dbe_Initdbe(); */
-	for (i = 0; i < 256; i++) {
-		for (j = 0; j < 100; j++) {
-			DBE_GETREG(cm_fifo, readVal);
-			if (readVal != 0x00000000)
-				break;
-			else
-				udelay(10);
-		}
-
-		// DBE_ISETREG(cmap, i, 0x00000000);
-		DBE_ISETREG(cmap, i, (i << 8) | (i << 16) | (i << 24));
-	}
-
-	/* dbe_InitFramebuffer(); */
-	frmWrite1 = 0;
-	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, frmWrite1,
-		      wholeTilesX);
-	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_RHS, frmWrite1, 0);
-
-	switch (bytesPerPixel) {
-	case 1:
-		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
-			      DBE_FRM_DEPTH_8);
-		break;
-	case 2:
-		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
-			      DBE_FRM_DEPTH_16);
-		break;
-	case 4:
-		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
-			      DBE_FRM_DEPTH_32);
-		break;
-	}
-
-	frmWrite2 = 0;
-	SET_DBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, frmWrite2, ypmax);
-
-	// Tell dbe about the framebuffer location and type
-	// XXX What format is the FRM_TILE_PTR??  64K aligned address?
-	frmWrite3b = 0;
-	SET_DBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, frmWrite3b,
-		      sgivwfb_mem_phys >> 9);
-	SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, frmWrite3b, 1);
-	SET_DBE_FIELD(FRM_CONTROL, FRM_LINEAR, frmWrite3b, 1);
-
-	/* Initialize DIDs */
-
-	outputVal = 0;
-	switch (bytesPerPixel) {
-	case 1:
-		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_I8);
-		break;
-	case 2:
-		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGBA5);
-		break;
-	case 4:
-		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGB8);
-		break;
-	}
-	SET_DBE_FIELD(WID, BUF, outputVal, DBE_BMODE_BOTH);
-
-	for (i = 0; i < 32; i++) {
-		DBE_ISETREG(mode_regs, i, outputVal);
-	}
-
-	/* dbe_InitTiming(); */
-	DBE_SETREG(vt_intr01, 0xffffffff);
-	DBE_SETREG(vt_intr23, 0xffffffff);
-
-	DBE_GETREG(dotclock, readVal);
-	DBE_SETREG(dotclock, readVal & 0xffff);
-
-	DBE_SETREG(vt_xymax, 0x00000000);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_ON, outputVal,
-		      currentTiming->vsync_start);
-	SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_OFF, outputVal,
-		      currentTiming->vsync_end);
-	DBE_SETREG(vt_vsync, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_ON, outputVal,
-		      currentTiming->hsync_start);
-	SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_OFF, outputVal,
-		      currentTiming->hsync_end);
-	DBE_SETREG(vt_hsync, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_ON, outputVal,
-		      currentTiming->vblank_start);
-	SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_OFF, outputVal,
-		      currentTiming->vblank_end);
-	DBE_SETREG(vt_vblank, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_ON, outputVal,
-		      currentTiming->hblank_start);
-	SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_OFF, outputVal,
-		      currentTiming->hblank_end - 3);
-	DBE_SETREG(vt_hblank, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_ON, outputVal,
-		      currentTiming->vblank_start);
-	SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_OFF, outputVal,
-		      currentTiming->vblank_end);
-	DBE_SETREG(vt_vcmap, outputVal);
-	outputVal = 0;
-	SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_ON, outputVal,
-		      currentTiming->hblank_start);
-	SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_OFF, outputVal,
-		      currentTiming->hblank_end - 3);
-	DBE_SETREG(vt_hcmap, outputVal);
-
-	if (flatpanel_id != -1)
-		sgivwfb_setup_flatpanel(par, currentTiming);
-
-	outputVal = 0;
-	temp = currentTiming->vblank_start - currentTiming->vblank_end - 1;
-	if (temp > 0)
-		temp = -temp;
-
-	SET_DBE_FIELD(DID_START_XY, DID_STARTY, outputVal, (u32) temp);
-	if (currentTiming->hblank_end >= 20)
-		SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
-			      currentTiming->hblank_end - 20);
-	else
-		SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
-			      currentTiming->htotal - (20 -
-						       currentTiming->
-						       hblank_end));
-	DBE_SETREG(did_start_xy, outputVal);
-
-	outputVal = 0;
-	SET_DBE_FIELD(CRS_START_XY, CRS_STARTY, outputVal,
-		      (u32) (temp + 1));
-	if (currentTiming->hblank_end >= DBE_CRS_MAGIC)
-		SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
-			      currentTiming->hblank_end - DBE_CRS_MAGIC);
-	else
-		SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
-			      currentTiming->htotal - (DBE_CRS_MAGIC -
-						       currentTiming->
-						       hblank_end));
-	DBE_SETREG(crs_start_xy, outputVal);
-
-	outputVal = 0;
-	SET_DBE_FIELD(VC_START_XY, VC_STARTY, outputVal, (u32) temp);
-	SET_DBE_FIELD(VC_START_XY, VC_STARTX, outputVal,
-		      currentTiming->hblank_end - 4);
-	DBE_SETREG(vc_start_xy, outputVal);
-
-	DBE_SETREG(frm_size_tile, frmWrite1);
-	DBE_SETREG(frm_size_pixel, frmWrite2);
-
-	outputVal = 0;
-	SET_DBE_FIELD(DOTCLK, M, outputVal, currentTiming->pll_m - 1);
-	SET_DBE_FIELD(DOTCLK, N, outputVal, currentTiming->pll_n - 1);
-	SET_DBE_FIELD(DOTCLK, P, outputVal, currentTiming->pll_p);
-	SET_DBE_FIELD(DOTCLK, RUN, outputVal, 1);
-	DBE_SETREG(dotclock, outputVal);
-
-	udelay(11 * 1000);
-
-	DBE_SETREG(vt_vpixen, 0xffffff);
-	DBE_SETREG(vt_hpixen, 0xffffff);
-
-	outputVal = 0;
-	SET_DBE_FIELD(VT_XYMAX, VT_MAXX, outputVal, currentTiming->htotal);
-	SET_DBE_FIELD(VT_XYMAX, VT_MAXY, outputVal, currentTiming->vtotal);
-	DBE_SETREG(vt_xymax, outputVal);
-
-	outputVal = frmWrite1;
-	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, outputVal, 1);
-	DBE_SETREG(frm_size_tile, outputVal);
-	DBE_SETREG(frm_size_tile, frmWrite1);
-
-	outputVal = 0;
-	SET_DBE_FIELD(OVR_WIDTH_TILE, OVR_FIFO_RESET, outputVal, 1);
-	DBE_SETREG(ovr_width_tile, outputVal);
-	DBE_SETREG(ovr_width_tile, 0);
-
-	DBE_SETREG(frm_control, frmWrite3b);
-	DBE_SETREG(did_control, 0);
-
-	// Wait for dbe to take frame settings
-	for (i = 0; i < 100000; i++) {
-		DBE_GETREG(frm_inhwctrl, readVal);
-		if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) !=
-		    0)
-			break;
-		else
-			udelay(1);
-	}
-
-	if (i == 100000)
-		printk(KERN_INFO
-		       "sgivwfb: timeout waiting for frame DMA enable.\n");
-
-	outputVal = 0;
-	htmp = currentTiming->hblank_end - 19;
-	if (htmp < 0)
-		htmp += currentTiming->htotal;	/* allow blank to wrap around */
-	SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_ON, outputVal, htmp);
-	SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_OFF, outputVal,
-		      ((htmp + currentTiming->width -
-			2) % currentTiming->htotal));
-	DBE_SETREG(vt_hpixen, outputVal);
-
-	outputVal = 0;
-	SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_OFF, outputVal,
-		      currentTiming->vblank_start);
-	SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_ON, outputVal,
-		      currentTiming->vblank_end);
-	DBE_SETREG(vt_vpixen, outputVal);
-
-	// Turn off mouse cursor
-	par->regs->crs_ctl = 0;
-
-	// XXX What's this section for??
-	DBE_GETREG(ctrlstat, readVal);
-	readVal &= 0x02000000;
-
-	if (readVal != 0) {
-		DBE_SETREG(ctrlstat, 0x30000000);
-	}
-	return 0;
-}
-
-/*
- *  Set a single color register. The values supplied are already
- *  rounded down to the hardware's capabilities (according to the
- *  entries in the var structure). Return != 0 for invalid regno.
- */
-
-static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
-			     u_int blue, u_int transp,
-			     struct fb_info *info)
-{
-	struct sgivw_par *par = (struct sgivw_par *) info->par;
-
-	if (regno > 255)
-		return 1;
-	red >>= 8;
-	green >>= 8;
-	blue >>= 8;
-
-	/* wait for the color map FIFO to have a free entry */
-	while (par->cmap_fifo == 0)
-		par->cmap_fifo = par->regs->cm_fifo;
-
-	par->regs->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
-	par->cmap_fifo--;	/* assume FIFO is filling up */
-	return 0;
-}
-
-static int sgivwfb_mmap(struct fb_info *info,
-			struct vm_area_struct *vma)
-{
-	int r;
-
-	pgprot_val(vma->vm_page_prot) =
-		pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
-
-	r = vm_iomap_memory(vma, sgivwfb_mem_phys, sgivwfb_mem_size);
-
-	printk(KERN_DEBUG "sgivwfb: mmap framebuffer P(%lx)->V(%lx)\n",
-		sgivwfb_mem_phys + (vma->vm_pgoff << PAGE_SHIFT), vma->vm_start);
-
-	return r;
-}
-
-int __init sgivwfb_setup(char *options)
-{
-	char *this_opt;
-
-	if (!options || !*options)
-		return 0;
-
-	while ((this_opt = strsep(&options, ",")) != NULL) {
-		if (!strncmp(this_opt, "monitor:", 8)) {
-			if (!strncmp(this_opt + 8, "crt", 3))
-				flatpanel_id = -1;
-			else if (!strncmp(this_opt + 8, "1600sw", 6))
-				flatpanel_id = FLATPANEL_SGI_1600SW;
-		}
-	}
-	return 0;
-}
-
-/*
- *  Initialisation
- */
-static int sgivwfb_probe(struct platform_device *dev)
-{
-	struct sgivw_par *par;
-	struct fb_info *info;
-	char *monitor;
-
-	info = framebuffer_alloc(sizeof(struct sgivw_par) + sizeof(u32) * 16, &dev->dev);
-	if (!info)
-		return -ENOMEM;
-	par = info->par;
-
-	if (!request_mem_region(DBE_REG_PHYS, DBE_REG_SIZE, "sgivwfb")) {
-		printk(KERN_ERR "sgivwfb: couldn't reserve mmio region\n");
-		framebuffer_release(info);
-		return -EBUSY;
-	}
-
-	par->regs = (struct asregs *) ioremap_nocache(DBE_REG_PHYS, DBE_REG_SIZE);
-	if (!par->regs) {
-		printk(KERN_ERR "sgivwfb: couldn't ioremap registers\n");
-		goto fail_ioremap_regs;
-	}
-
-	mtrr_add(sgivwfb_mem_phys, sgivwfb_mem_size, MTRR_TYPE_WRCOMB, 1);
-
-	sgivwfb_fix.smem_start = sgivwfb_mem_phys;
-	sgivwfb_fix.smem_len = sgivwfb_mem_size;
-	sgivwfb_fix.ywrapstep = ywrap;
-	sgivwfb_fix.ypanstep = ypan;
-
-	info->fix = sgivwfb_fix;
-
-	switch (flatpanel_id) {
-		case FLATPANEL_SGI_1600SW:
-			info->var = sgivwfb_var1600sw;
-			monitor = "SGI 1600SW flatpanel";
-			break;
-		default:
-			info->var = sgivwfb_var;
-			monitor = "CRT";
-	}
-
-	printk(KERN_INFO "sgivwfb: %s monitor selected\n", monitor);
-
-	info->fbops = &sgivwfb_ops;
-	info->pseudo_palette = (void *) (par + 1);
-	info->flags = FBINFO_DEFAULT;
-
-	info->screen_base = ioremap_nocache((unsigned long) sgivwfb_mem_phys, sgivwfb_mem_size);
-	if (!info->screen_base) {
-		printk(KERN_ERR "sgivwfb: couldn't ioremap screen_base\n");
-		goto fail_ioremap_fbmem;
-	}
-
-	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
-		goto fail_color_map;
-
-	if (register_framebuffer(info) < 0) {
-		printk(KERN_ERR "sgivwfb: couldn't register framebuffer\n");
-		goto fail_register_framebuffer;
-	}
-
-	platform_set_drvdata(dev, info);
-
-	fb_info(info, "SGI DBE frame buffer device, using %ldK of video memory at %#lx\n",
-		sgivwfb_mem_size >> 10, sgivwfb_mem_phys);
-	return 0;
-
-fail_register_framebuffer:
-	fb_dealloc_cmap(&info->cmap);
-fail_color_map:
-	iounmap((char *) info->screen_base);
-fail_ioremap_fbmem:
-	iounmap(par->regs);
-fail_ioremap_regs:
-	release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
-	framebuffer_release(info);
-	return -ENXIO;
-}
-
-static int sgivwfb_remove(struct platform_device *dev)
-{
-	struct fb_info *info = platform_get_drvdata(dev);
-
-	if (info) {
-		struct sgivw_par *par = info->par;
-
-		unregister_framebuffer(info);
-		dbe_TurnOffDma(par);
-		iounmap(par->regs);
-		iounmap(info->screen_base);
-		release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
-		fb_dealloc_cmap(&info->cmap);
-		framebuffer_release(info);
-	}
-	return 0;
-}
-
-static struct platform_driver sgivwfb_driver = {
-	.probe	= sgivwfb_probe,
-	.remove	= sgivwfb_remove,
-	.driver	= {
-		.name	= "sgivwfb",
-	},
-};
-
-static struct platform_device *sgivwfb_device;
-
-int __init sgivwfb_init(void)
-{
-	int ret;
-
-#ifndef MODULE
-	char *option = NULL;
-
-	if (fb_get_options("sgivwfb", &option))
-		return -ENODEV;
-	sgivwfb_setup(option);
-#endif
-	ret = platform_driver_register(&sgivwfb_driver);
-	if (!ret) {
-		sgivwfb_device = platform_device_alloc("sgivwfb", 0);
-		if (sgivwfb_device) {
-			ret = platform_device_add(sgivwfb_device);
-		} else
-			ret = -ENOMEM;
-		if (ret) {
-			platform_driver_unregister(&sgivwfb_driver);
-			platform_device_put(sgivwfb_device);
-		}
-	}
-	return ret;
-}
-
-module_init(sgivwfb_init);
-
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-
-static void __exit sgivwfb_exit(void)
-{
-	platform_device_unregister(sgivwfb_device);
-	platform_driver_unregister(&sgivwfb_driver);
-}
-
-module_exit(sgivwfb_exit);
-
-#endif				/* MODULE */